summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-04-07 11:02:23 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-04-07 11:02:23 -0700
commitfb1ae635772d679eb312fa447290fc02cd0e4cf1 (patch)
tree45733f9820da1190cd58bfff080edbb02af961a8
parentaddb2d6c13993060ae75f5005815b19dd2abdd64 (diff)
parent472a474c6630efd195d3738339fd1bdc8aa3b1aa (diff)
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards x86: Increase CONFIG_NODES_SHIFT max to 10 ibft, x86: Change reserve_ibft_region() to find_ibft_region() x86, hpet: Fix bug in RTC emulation x86, hpet: Erratum workaround for read after write of HPET comparator bootmem, x86: Fix 32bit numa system without RAM on node 0 nobootmem, x86: Fix 32bit numa system without RAM on node 0 x86: Handle overlapping mptables x86: Make e820_remove_range to handle all covered case x86-32, resume: do a global tlb flush in S4 resume
-rw-r--r--arch/x86/Kconfig4
-rw-r--r--arch/x86/kernel/apic/apic.c2
-rw-r--r--arch/x86/kernel/e820.c24
-rw-r--r--arch/x86/kernel/hpet.c9
-rw-r--r--arch/x86/kernel/mpparse.c4
-rw-r--r--arch/x86/kernel/setup.c14
-rw-r--r--arch/x86/power/hibernate_asm_32.S15
-rw-r--r--drivers/firmware/iscsi_ibft_find.c11
-rw-r--r--include/linux/iscsi_ibft.h8
-rw-r--r--mm/bootmem.c17
10 files changed, 82 insertions, 26 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 0eacb1ffb42..9458685902b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1216,8 +1216,8 @@ config NUMA_EMU
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
- range 1 9
- default "9" if MAXSMP
+ range 1 10
+ default "10" if MAXSMP
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 00187f1fcfb..e5a4a1e0161 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1640,8 +1640,10 @@ int __init APIC_init_uniprocessor(void)
}
#endif
+#ifndef CONFIG_SMP
enable_IR_x2apic();
default_setup_apic_routing();
+#endif
verify_local_APIC();
connect_bsp_APIC();
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 740b440fbd7..7bca3c6a02f 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -519,29 +519,45 @@ u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ",
(unsigned long long) start,
(unsigned long long) end);
- e820_print_type(old_type);
+ if (checktype)
+ e820_print_type(old_type);
printk(KERN_CONT "\n");
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
u64 final_start, final_end;
+ u64 ei_end;
if (checktype && ei->type != old_type)
continue;
+
+ ei_end = ei->addr + ei->size;
/* totally covered? */
- if (ei->addr >= start &&
- (ei->addr + ei->size) <= (start + size)) {
+ if (ei->addr >= start && ei_end <= end) {
real_removed_size += ei->size;
memset(ei, 0, sizeof(struct e820entry));
continue;
}
+
+ /* new range is totally covered? */
+ if (ei->addr < start && ei_end > end) {
+ e820_add_region(end, ei_end - end, ei->type);
+ ei->size = start - ei->addr;
+ real_removed_size += size;
+ continue;
+ }
+
/* partially covered */
final_start = max(start, ei->addr);
- final_end = min(start + size, ei->addr + ei->size);
+ final_end = min(end, ei_end);
if (final_start >= final_end)
continue;
real_removed_size += final_end - final_start;
+ /*
+ * left range could be head or tail, so need to update
+ * size at first.
+ */
ei->size -= final_end - final_start;
if (ei->addr < final_start)
continue;
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index d10a7e7294f..23b4ecdffa9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -400,9 +400,15 @@ static int hpet_next_event(unsigned long delta,
* then we might have a real hardware problem. We can not do
* much about it here, but at least alert the user/admin with
* a prominent warning.
+ * An erratum on some chipsets (ICH9,..), results in comparator read
+ * immediately following a write returning old value. Workaround
+ * for this is to read this value second time, when first
+ * read returns old value.
*/
- WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
+ if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
+ WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
KERN_WARNING "hpet: compare register read back failed.\n");
+ }
return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
}
@@ -1144,6 +1150,7 @@ int hpet_set_periodic_freq(unsigned long freq)
do_div(clc, freq);
clc >>= hpet_clockevent.shift;
hpet_pie_delta = clc;
+ hpet_pie_limit = 0;
}
return 1;
}
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index a2c1edd2d3a..e81030f71a8 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -664,7 +664,7 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf)
{
unsigned long size = get_mpc_size(mpf->physptr);
- reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc");
+ reserve_early_overlap_ok(mpf->physptr, mpf->physptr+size, "MP-table mpc");
}
static int __init smp_scan_config(unsigned long base, unsigned long length)
@@ -693,7 +693,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)
mpf, (u64)virt_to_phys(mpf));
mem = virt_to_phys(mpf);
- reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf");
+ reserve_early_overlap_ok(mem, mem + sizeof(*mpf), "MP-table mpf");
if (mpf->physptr)
smp_reserve_memory(mpf);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 9570541caf7..c4851eff57b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -607,6 +607,16 @@ static int __init setup_elfcorehdr(char *arg)
early_param("elfcorehdr", setup_elfcorehdr);
#endif
+static __init void reserve_ibft_region(void)
+{
+ unsigned long addr, size = 0;
+
+ addr = find_ibft_region(&size);
+
+ if (size)
+ reserve_early_overlap_ok(addr, addr + size, "ibft");
+}
+
#ifdef CONFIG_X86_RESERVE_LOW_64K
static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
{
@@ -909,6 +919,8 @@ void __init setup_arch(char **cmdline_p)
*/
find_smp_config();
+ reserve_ibft_region();
+
reserve_trampoline_memory();
#ifdef CONFIG_ACPI_SLEEP
@@ -976,8 +988,6 @@ void __init setup_arch(char **cmdline_p)
dma32_reserve_bootmem();
- reserve_ibft_region();
-
#ifdef CONFIG_KVM_CLOCK
kvmclock_init();
#endif
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index b641388d828..ad47daeafa4 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -27,10 +27,17 @@ ENTRY(swsusp_arch_suspend)
ret
ENTRY(restore_image)
+ movl mmu_cr4_features, %ecx
movl resume_pg_dir, %eax
subl $__PAGE_OFFSET, %eax
movl %eax, %cr3
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ andl $~(X86_CR4_PGE), %ecx
+ movl %ecx, %cr4; # turn off PGE
+ movl %cr3, %eax; # flush TLB
+ movl %eax, %cr3
+1:
movl restore_pblist, %edx
.p2align 4,,7
@@ -54,16 +61,8 @@ done:
movl $swapper_pg_dir, %eax
subl $__PAGE_OFFSET, %eax
movl %eax, %cr3
- /* Flush TLB, including "global" things (vmalloc) */
movl mmu_cr4_features, %ecx
jecxz 1f # cr4 Pentium and higher, skip if zero
- movl %ecx, %edx
- andl $~(X86_CR4_PGE), %edx
- movl %edx, %cr4; # turn off PGE
-1:
- movl %cr3, %eax; # flush TLB
- movl %eax, %cr3
- jecxz 1f # cr4 Pentium and higher, skip if zero
movl %ecx, %cr4; # turn PGE back on
1:
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 134dd732839..d6470ef36e4 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -51,7 +51,7 @@ EXPORT_SYMBOL_GPL(ibft_addr);
* Routine used to find the iSCSI Boot Format Table. The logical
* kernel address is set in the ibft_addr global variable.
*/
-void __init reserve_ibft_region(void)
+unsigned long __init find_ibft_region(unsigned long *sizep)
{
unsigned long pos;
unsigned int len = 0;
@@ -77,6 +77,11 @@ void __init reserve_ibft_region(void)
}
}
}
- if (ibft_addr)
- reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT);
+ if (ibft_addr) {
+ *sizep = PAGE_ALIGN(len);
+ return pos;
+ }
+
+ *sizep = 0;
+ return 0;
}
diff --git a/include/linux/iscsi_ibft.h b/include/linux/iscsi_ibft.h
index 6092487e295..d2e4042f8f5 100644
--- a/include/linux/iscsi_ibft.h
+++ b/include/linux/iscsi_ibft.h
@@ -42,9 +42,13 @@ extern struct ibft_table_header *ibft_addr;
* mapped address is set in the ibft_addr variable.
*/
#ifdef CONFIG_ISCSI_IBFT_FIND
-extern void __init reserve_ibft_region(void);
+unsigned long find_ibft_region(unsigned long *sizep);
#else
-static inline void reserve_ibft_region(void) { }
+static inline unsigned long find_ibft_region(unsigned long *sizep)
+{
+ *sizep = 0;
+ return 0;
+}
#endif
#endif /* ISCSI_IBFT_H */
diff --git a/mm/bootmem.c b/mm/bootmem.c
index eff22422057..58c66cc5056 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -304,9 +304,22 @@ unsigned long __init free_all_bootmem_node(pg_data_t *pgdat)
unsigned long __init free_all_bootmem(void)
{
#ifdef CONFIG_NO_BOOTMEM
- return free_all_memory_core_early(NODE_DATA(0)->node_id);
+ /*
+ * We need to use MAX_NUMNODES instead of NODE_DATA(0)->node_id
+ * because in some case like Node0 doesnt have RAM installed
+ * low ram will be on Node1
+ * Use MAX_NUMNODES will make sure all ranges in early_node_map[]
+ * will be used instead of only Node0 related
+ */
+ return free_all_memory_core_early(MAX_NUMNODES);
#else
- return free_all_bootmem_core(NODE_DATA(0)->bdata);
+ unsigned long total_pages = 0;
+ bootmem_data_t *bdata;
+
+ list_for_each_entry(bdata, &bdata_list, list)
+ total_pages += free_all_bootmem_core(bdata);
+
+ return total_pages;
#endif
}