Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (41 commits)
  regulator: Add some brief design documentation
  regulator: fix voltage range in da9034 ldo12
  regulator/driver: be more specific in nanodoc for is_enabled
  regulator/lp3971: drop unnecessary initialization
  regulator: drop 'default n'
  regulator: fix typos
  regulator: fix calculation of voltage range in da9034_set_ldo12_voltage()
  regulator: update a filename in documentation
  drivers/regulator/Kconfig: fix typo (s/Usersapce/Userspace/) in REGULATOR_USERSPACE_CONSUMER description
  REGULATOR Handle positive returncode from enable
  regulator: tps650xx - build fixes for x86_64
  Fix some regulator documentation
  Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile
  Regulator: Add TPS6507x regulator driver
  Regulator: Add TPS65023 regulator driver
  regulator: userspace: use sysfs_create_group
  regulator: Add GPIO enable control to fixed voltage regulator driver
  Regulator: Implement list_voltage for pcf50633 regulator driver.
  regulator: regulator_enable() permission checking
  regulator: Push locking for regulator_is_enabled() out
  ...

22 files changed, 1966 insertions, 176 deletions

diff --git a/Documentation/power/regulator/design.txt b/Documentation/power/regulator/design.txt
new file mode 100644
index 00000000000..f9b56b72b78
--- /dev/null
+++ b/Documentation/power/regulator/design.txt
@@ -0,0 +1,33 @@
+Regulator API design notes
+==========================
+
+This document provides a brief, partially structured, overview of some
+of the design considerations which impact the regulator API design.
+
+Safety
+------
+
+ - Errors in regulator configuration can have very serious consequences
+   for the system, potentially including lasting hardware damage.
+ - It is not possible to automatically determine the power confugration
+   of the system - software-equivalent variants of the same chip may
+   have different power requirments, and not all components with power
+   requirements are visible to software.
+
+  => The API should make no changes to the hardware state unless it has
+     specific knowledge that these changes are safe to do perform on
+     this particular system.
+
+Consumer use cases
+------------------
+
+ - The overwhelming majority of devices in a system will have no
+   requirement to do any runtime configuration of their power beyond
+   being able to turn it on or off.
+
+ - Many of the power supplies in the system will be shared between many
+   different consumers.
+
+  => The consumer API should be structured so that these use cases are
+     very easy to handle and so that consumers will work with shared
+     supplies without any additional effort.
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index ce3487d99ab..63728fed620 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -87,7 +87,7 @@ static struct platform_device regulator_devices[] = {
 },
 };
 /* register regulator 1 device */
-platform_device_register(&wm8350_regulator_devices[0]);
+platform_device_register(&regulator_devices[0]);
 
 /* register regulator 2 device */
-platform_device_register(&wm8350_regulator_devices[1]);
+platform_device_register(&regulator_devices[1]);
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index 0cded696ca0..ffd185bb605 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -29,7 +29,7 @@ Some terms used in this document:-
 
 
   o PMIC         - Power Management IC. An IC that contains numerous regulators
-                   and often contains other susbsystems.
+                   and often contains other subsystems.
 
 
   o Consumer     - Electronic device that is supplied power by a regulator.
@@ -168,4 +168,4 @@ relevant to non SoC devices and is split into the following four interfaces:-
       userspace via sysfs. This could be used to help monitor device power
       consumption and status.
 
-        See Documentation/ABI/testing/regulator-sysfs.txt
+        See Documentation/ABI/testing/sysfs-class-regulator
diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
index 4200accb9bb..3f8b528f237 100644
--- a/Documentation/power/regulator/regulator.txt
+++ b/Documentation/power/regulator/regulator.txt
@@ -10,8 +10,9 @@ Registration
 
 Drivers can register a regulator by calling :-
 
-struct regulator_dev *regulator_register(struct device *dev,
-	struct regulator_desc *regulator_desc);
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+	struct device *dev, struct regulator_init_data *init_data,
+	void *driver_data);
 
 This will register the regulators capabilities and operations to the regulator
 core.
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 2dc42bbf6fe..bcbb161bde0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1,6 +1,5 @@
 menuconfig REGULATOR
 	bool "Voltage and Current Regulator Support"
-	default n
 	help
 	  Generic Voltage and Current Regulator support.
 
@@ -30,7 +29,6 @@ config REGULATOR_DEBUG
 
 config REGULATOR_FIXED_VOLTAGE
 	tristate "Fixed voltage regulator support"
-	default n
 	help
 	  This driver provides support for fixed voltage regulators,
 	  useful for systems which use a combination of software
@@ -38,7 +36,6 @@ config REGULATOR_FIXED_VOLTAGE
 
 config REGULATOR_VIRTUAL_CONSUMER
 	tristate "Virtual regulator consumer support"
-	default n
 	help
 	  This driver provides a virtual consumer for the voltage and
           current regulator API which provides sysfs controls for
@@ -49,17 +46,15 @@ config REGULATOR_VIRTUAL_CONSUMER
 
 config REGULATOR_USERSPACE_CONSUMER
 	tristate "Userspace regulator consumer support"
-	default n
 	help
 	  There are some classes of devices that are controlled entirely
-	  from user space. Usersapce consumer driver provides ability to
+	  from user space. Userspace consumer driver provides ability to
 	  control power supplies for such devices.
 
           If unsure, say no.
 
 config REGULATOR_BQ24022
 	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
-	default n
 	help
 	  This driver controls a TI bq24022 Charger attached via
 	  GPIOs. The provided current regulator can enable/disable
@@ -69,7 +64,6 @@ config REGULATOR_BQ24022
 config REGULATOR_MAX1586
 	tristate "Maxim 1586/1587 voltage regulator"
 	depends on I2C
-	default n
 	help
 	  This driver controls a Maxim 1586 or 1587 voltage output
 	  regulator via I2C bus. The provided regulator is suitable
@@ -147,5 +141,21 @@ config REGULATOR_AB3100
 	 AB3100 analog baseband dealing with power regulators
 	 for the system.
 
+config REGULATOR_TPS65023
+	tristate "TI TPS65023 Power regulators"
+	depends on I2C
+	help
+	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
+	  three step-down converters and two general-purpose LDO voltage regulators.
+	  It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS6507X
+	tristate "TI TPS6507X Power regulators"
+	depends on I2C
+	help
+	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
+	  three step-down converters and two general-purpose LDO voltage regulators.
+	  It supports TI's software based Class-2 SmartReflex implementation.
+
 endif
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 768b3316d6e..4257a868377 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -23,4 +23,7 @@ obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 
+obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 91ba9bfaa70..744ea1d0b59 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -37,7 +37,7 @@ static int has_full_constraints;
  */
 struct regulator_map {
 	struct list_head list;
-	struct device *dev;
+	const char *dev_name;   /* The dev_name() for the consumer */
 	const char *supply;
 	struct regulator_dev *regulator;
 };
@@ -232,7 +232,7 @@ static ssize_t regulator_name_show(struct device *dev,
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
 	const char *name;
 
-	if (rdev->constraints->name)
+	if (rdev->constraints && rdev->constraints->name)
 		name = rdev->constraints->name;
 	else if (rdev->desc->name)
 		name = rdev->desc->name;
@@ -280,8 +280,13 @@ static ssize_t regulator_state_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
+	ssize_t ret;
+
+	mutex_lock(&rdev->mutex);
+	ret = regulator_print_state(buf, _regulator_is_enabled(rdev));
+	mutex_unlock(&rdev->mutex);
 
-	return regulator_print_state(buf, _regulator_is_enabled(rdev));
+	return ret;
 }
 static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
 
@@ -857,23 +862,39 @@ out:
  * set_consumer_device_supply: Bind a regulator to a symbolic supply
  * @rdev:         regulator source
  * @consumer_dev: device the supply applies to
+ * @consumer_dev_name: dev_name() string for device supply applies to
  * @supply:       symbolic name for supply
  *
  * Allows platform initialisation code to map physical regulator
  * sources to symbolic names for supplies for use by devices.  Devices
  * should use these symbolic names to request regulators, avoiding the
  * need to provide board-specific regulator names as platform data.
+ *
+ * Only one of consumer_dev and consumer_dev_name may be specified.
  */
 static int set_consumer_device_supply(struct regulator_dev *rdev,
-	struct device *consumer_dev, const char *supply)
+	struct device *consumer_dev, const char *consumer_dev_name,
+	const char *supply)
 {
 	struct regulator_map *node;
+	int has_dev;
+
+	if (consumer_dev && consumer_dev_name)
+		return -EINVAL;
+
+	if (!consumer_dev_name && consumer_dev)
+		consumer_dev_name = dev_name(consumer_dev);
 
 	if (supply == NULL)
 		return -EINVAL;
 
+	if (consumer_dev_name != NULL)
+		has_dev = 1;
+	else
+		has_dev = 0;
+
 	list_for_each_entry(node, &regulator_map_list, list) {
-		if (consumer_dev != node->dev)
+		if (consumer_dev_name != node->dev_name)
 			continue;
 		if (strcmp(node->supply, supply) != 0)
 			continue;
@@ -886,30 +907,45 @@ static int set_consumer_device_supply(struct regulator_dev *rdev,
 		return -EBUSY;
 	}
 
-	node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
+	node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
 	if (node == NULL)
 		return -ENOMEM;
 
 	node->regulator = rdev;
-	node->dev = consumer_dev;
 	node->supply = supply;
 
+	if (has_dev) {
+		node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
+		if (node->dev_name == NULL) {
+			kfree(node);
+			return -ENOMEM;
+		}
+	}
+
 	list_add(&node->list, &regulator_map_list);
 	return 0;
 }
 
 static void unset_consumer_device_supply(struct regulator_dev *rdev,
-	struct device *consumer_dev)
+	const char *consumer_dev_name, struct device *consumer_dev)
 {
 	struct regulator_map *node, *n;
 
+	if (consumer_dev && !consumer_dev_name)
+		consumer_dev_name = dev_name(consumer_dev);
+
 	list_for_each_entry_safe(node, n, &regulator_map_list, list) {
-		if (rdev == node->regulator &&
-			consumer_dev == node->dev) {
-			list_del(&node->list);
-			kfree(node);
-			return;
-		}
+		if (rdev != node->regulator)
+			continue;
+
+		if (consumer_dev_name && node->dev_name &&
+		    strcmp(consumer_dev_name, node->dev_name))
+			continue;
+
+		list_del(&node->list);
+		kfree(node->dev_name);
+		kfree(node);
+		return;
 	}
 }
 
@@ -920,6 +956,7 @@ static void unset_regulator_supplies(struct regulator_dev *rdev)
 	list_for_each_entry_safe(node, n, &regulator_map_list, list) {
 		if (rdev == node->regulator) {
 			list_del(&node->list);
+			kfree(node->dev_name);
 			kfree(node);
 			return;
 		}
@@ -1001,35 +1038,33 @@ overflow_err:
 	return NULL;
 }
 
-/**
- * regulator_get - lookup and obtain a reference to a regulator.
- * @dev: device for regulator "consumer"
- * @id: Supply name or regulator ID.
- *
- * Returns a struct regulator corresponding to the regulator producer,
- * or IS_ERR() condition containing errno.
- *
- * Use of supply names configured via regulator_set_device_supply() is
- * strongly encouraged.  It is recommended that the supply name used
- * should match the name used for the supply and/or the relevant
- * device pins in the datasheet.
- */
-struct regulator *regulator_get(struct device *dev, const char *id)
+/* Internal regulator request function */
+static struct regulator *_regulator_get(struct device *dev, const char *id,
+					int exclusive)
 {
 	struct regulator_dev *rdev;
 	struct regulator_map *map;
 	struct regulator *regulator = ERR_PTR(-ENODEV);
+	const char *devname = NULL;
+	int ret;
 
 	if (id == NULL) {
 		printk(KERN_ERR "regulator: get() with no identifier\n");
 		return regulator;
 	}
 
+	if (dev)
+		devname = dev_name(dev);
+
 	mutex_lock(&regulator_list_mutex);
 
 	list_for_each_entry(map, &regulator_map_list, list) {
-		if (dev == map->dev &&
-		    strcmp(map->supply, id) == 0) {
+		/* If the mapping has a device set up it must match */
+		if (map->dev_name &&
+		    (!devname || strcmp(map->dev_name, devname)))
+			continue;
+
+		if (strcmp(map->supply, id) == 0) {
 			rdev = map->regulator;
 			goto found;
 		}
@@ -1038,6 +1073,16 @@ struct regulator *regulator_get(struct device *dev, const char *id)
 	return regulator;
 
 found:
+	if (rdev->exclusive) {
+		regulator = ERR_PTR(-EPERM);
+		goto out;
+	}
+
+	if (exclusive && rdev->open_count) {
+		regulator = ERR_PTR(-EBUSY);
+		goto out;
+	}
+
 	if (!try_module_get(rdev->owner))
 		goto out;
 
@@ -1047,13 +1092,70 @@ found:
 		module_put(rdev->owner);
 	}
 
+	rdev->open_count++;
+	if (exclusive) {
+		rdev->exclusive = 1;
+
+		ret = _regulator_is_enabled(rdev);
+		if (ret > 0)
+			rdev->use_count = 1;
+		else
+			rdev->use_count = 0;
+	}
+
 out:
 	mutex_unlock(&regulator_list_mutex);
+
 	return regulator;
 }
+
+/**
+ * regulator_get - lookup and obtain a reference to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno.
+ *
+ * Use of supply names configured via regulator_set_device_supply() is
+ * strongly encouraged.  It is recommended that the supply name used
+ * should match the name used for the supply and/or the relevant
+ * device pins in the datasheet.
+ */
+struct regulator *regulator_get(struct device *dev, const char *id)
+{
+	return _regulator_get(dev, id, 0);
+}
 EXPORT_SYMBOL_GPL(regulator_get);
 
 /**
+ * regulator_get_exclusive - obtain exclusive access to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno.  Other consumers will be
+ * unable to obtain this reference is held and the use count for the
+ * regulator will be initialised to reflect the current state of the
+ * regulator.
+ *
+ * This is intended for use by consumers which cannot tolerate shared
+ * use of the regulator such as those which need to force the
+ * regulator off for correct operation of the hardware they are
+ * controlling.
+ *
+ * Use of supply names configured via regulator_set_device_supply() is
+ * strongly encouraged.  It is recommended that the supply name used
+ * should match the name used for the supply and/or the relevant
+ * device pins in the datasheet.
+ */
+struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
+{
+	return _regulator_get(dev, id, 1);
+}
+EXPORT_SYMBOL_GPL(regulator_get_exclusive);
+
+/**
  * regulator_put - "free" the regulator source
  * @regulator: regulator source
  *
@@ -1081,21 +1183,29 @@ void regulator_put(struct regulator *regulator)
 	list_del(&regulator->list);
 	kfree(regulator);
 
+	rdev->open_count--;
+	rdev->exclusive = 0;
+
 	module_put(rdev->owner);
 	mutex_unlock(&regulator_list_mutex);
 }
 EXPORT_SYMBOL_GPL(regulator_put);
 
+static int _regulator_can_change_status(struct regulator_dev *rdev)
+{
+	if (!rdev->constraints)
+		return 0;
+
+	if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS)
+		return 1;
+	else
+		return 0;
+}
+
 /* locks held by regulator_enable() */
 static int _regulator_enable(struct regulator_dev *rdev)
 {
-	int ret = -EINVAL;
-
-	if (!rdev->constraints) {
-		printk(KERN_ERR "%s: %s has no constraints\n",
-		       __func__, rdev->desc->name);
-		return ret;
-	}
+	int ret;
 
 	/* do we need to enable the supply regulator first */
 	if (rdev->supply) {
@@ -1108,24 +1218,35 @@ static int _regulator_enable(struct regulator_dev *rdev)
 	}
 
 	/* check voltage and requested load before enabling */
-	if (rdev->desc->ops->enable) {
-
-		if (rdev->constraints &&
-			(rdev->constraints->valid_ops_mask &
-			REGULATOR_CHANGE_DRMS))
-			drms_uA_update(rdev);
-
-		ret = rdev->desc->ops->enable(rdev);
-		if (ret < 0) {
-			printk(KERN_ERR "%s: failed to enable %s: %d\n",
+	if (rdev->constraints &&
+	    (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
+		drms_uA_update(rdev);
+
+	if (rdev->use_count == 0) {
+		/* The regulator may on if it's not switchable or left on */
+		ret = _regulator_is_enabled(rdev);
+		if (ret == -EINVAL || ret == 0) {
+			if (!_regulator_can_change_status(rdev))
+				return -EPERM;
+
+			if (rdev->desc->ops->enable) {
+				ret = rdev->desc->ops->enable(rdev);
+				if (ret < 0)
+					return ret;
+			} else {
+				return -EINVAL;
+			}
+		} else if (ret < 0) {
+			printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
 			       __func__, rdev->desc->name, ret);
 			return ret;
 		}
-		rdev->use_count++;
-		return ret;
+		/* Fallthrough on positive return values - already enabled */
 	}
 
-	return ret;
+	rdev->use_count++;
+
+	return 0;
 }
 
 /**
@@ -1165,7 +1286,8 @@ static int _regulator_disable(struct regulator_dev *rdev)
 	if (rdev->use_count == 1 && !rdev->constraints->always_on) {
 
 		/* we are last user */
-		if (rdev->desc->ops->disable) {
+		if (_regulator_can_change_status(rdev) &&
+		    rdev->desc->ops->disable) {
 			ret = rdev->desc->ops->disable(rdev);
 			if (ret < 0) {
 				printk(KERN_ERR "%s: failed to disable %s\n",
@@ -1265,20 +1387,11 @@ EXPORT_SYMBOL_GPL(regulator_force_disable);
 
 static int _regulator_is_enabled(struct regulator_dev *rdev)
 {
-	int ret;
-
-	mutex_lock(&rdev->mutex);
-
 	/* sanity check */
-	if (!rdev->desc->ops->is_enabled) {
-		ret = -EINVAL;
-		goto out;
-	}
+	if (!rdev->desc->ops->is_enabled)
+		return -EINVAL;
 
-	ret = rdev->desc->ops->is_enabled(rdev);
-out:
-	mutex_unlock(&rdev->mutex);
-	return ret;
+	return rdev->desc->ops->is_enabled(rdev);
 }
 
 /**
@@ -1295,7 +1408,13 @@ out:
  */
 int regulator_is_enabled(struct regulator *regulator)
 {
-	return _regulator_is_enabled(regulator->rdev);
+	int ret;
+
+	mutex_lock(&regulator->rdev->mutex);
+	ret = _regulator_is_enabled(regulator->rdev);
+	mutex_unlock(&regulator->rdev->mutex);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_is_enabled);
 
@@ -1350,6 +1469,35 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector)
 EXPORT_SYMBOL_GPL(regulator_list_voltage);
 
 /**
+ * regulator_is_supported_voltage - check if a voltage range can be supported
+ *
+ * @regulator: Regulator to check.
+ * @min_uV: Minimum required voltage in uV.
+ * @max_uV: Maximum required voltage in uV.
+ *
+ * Returns a boolean or a negative error code.
+ */
+int regulator_is_supported_voltage(struct regulator *regulator,
+				   int min_uV, int max_uV)
+{
+	int i, voltages, ret;
+
+	ret = regulator_count_voltages(regulator);
+	if (ret < 0)
+		return ret;
+	voltages = ret;
+
+	for (i = 0; i < voltages; i++) {
+		ret = regulator_list_voltage(regulator, i);
+
+		if (ret >= min_uV && ret <= max_uV)
+			return 1;
+	}
+
+	return 0;
+}
+
+/**
  * regulator_set_voltage - set regulator output voltage
  * @regulator: regulator source
  * @min_uV: Minimum required voltage in uV
@@ -2091,11 +2239,13 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	for (i = 0; i < init_data->num_consumer_supplies; i++) {
 		ret = set_consumer_device_supply(rdev,
 			init_data->consumer_supplies[i].dev,
+			init_data->consumer_supplies[i].dev_name,
 			init_data->consumer_supplies[i].supply);
 		if (ret < 0) {
 			for (--i; i >= 0; i--)
 				unset_consumer_device_supply(rdev,
-					init_data->consumer_supplies[i].dev);
+				    init_data->consumer_supplies[i].dev_name,
+				    init_data->consumer_supplies[i].dev);
 			goto scrub;
 		}
 	}
@@ -2130,6 +2280,7 @@ void regulator_unregister(struct regulator_dev *rdev)
 		return;
 
 	mutex_lock(&regulator_list_mutex);
+	WARN_ON(rdev->open_count);
 	unset_regulator_supplies(rdev);
 	list_del(&rdev->list);
 	if (rdev->supply)
@@ -2277,14 +2428,14 @@ static int __init regulator_init_complete(void)
 		ops = rdev->desc->ops;
 		c = rdev->constraints;
 
-		if (c->name)
+		if (c && c->name)
 			name = c->name;
 		else if (rdev->desc->name)
 			name = rdev->desc->name;
 		else
 			name = "regulator";
 
-		if (!ops->disable || c->always_on)
+		if (!ops->disable || (c && c->always_on))
 			continue;
 
 		mutex_lock(&rdev->mutex);
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index b8b89ef10a8..aa224d936e0 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -64,6 +64,14 @@
 #define DA9034_MDTV2		(0x33)
 #define DA9034_MVRC		(0x34)
 
+/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */
+#define DA9035_OVER3		(0x12)
+#define DA9035_VCC2		(0x1f)
+#define DA9035_3DTV1		(0x2c)
+#define DA9035_3DTV2		(0x2d)
+#define DA9035_3VRC		(0x2e)
+#define DA9035_AUTOSKIP		(0x2f)
+
 struct da903x_regulator_info {
 	struct regulator_desc desc;
 
@@ -79,6 +87,10 @@ struct da903x_regulator_info {
 	int	enable_bit;
 };
 
+static int da9034_ldo12_data[] = { 1700, 1750, 1800, 1850, 1900, 1950,
+				   2000, 2050, 2700, 2750, 2800, 2850,
+				   2900, 2950, 3000, 3050 };
+
 static inline struct device *to_da903x_dev(struct regulator_dev *rdev)
 {
 	return rdev_get_dev(rdev)->parent->parent;
@@ -162,6 +174,17 @@ static int da903x_is_enabled(struct regulator_dev *rdev)
 	return !!(reg_val & (1 << info->enable_bit));
 }
 
+static int da903x_list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret;
+
+	ret = info->min_uV + info->step_uV * selector;
+	if (ret > info->max_uV)
+		return -EINVAL;
+	return ret;
+}
+
 /* DA9030 specific operations */
 static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
 				       int min_uV, int max_uV)
@@ -278,7 +301,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
 	}
 
 	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
-	val = (val > 7 || val < 20) ? 8 : val - 12;
+	val = (val >= 20) ? val - 12 : ((val > 7) ? 8 : val);
 	val <<= info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
 
@@ -305,9 +328,18 @@ static int da9034_get_ldo12_voltage(struct regulator_dev *rdev)
 	return info->min_uV + info->step_uV * val;
 }
 
+static int da9034_list_ldo12_voltage(struct regulator_dev *rdev,
+				     unsigned selector)
+{
+	if (selector > ARRAY_SIZE(da9034_ldo12_data))
+		return -EINVAL;
+	return da9034_ldo12_data[selector] * 1000;
+}
+
 static struct regulator_ops da903x_regulator_ldo_ops = {
 	.set_voltage	= da903x_set_ldo_voltage,
 	.get_voltage	= da903x_get_voltage,
+	.list_voltage	= da903x_list_voltage,
 	.enable		= da903x_enable,
 	.disable	= da903x_disable,
 	.is_enabled	= da903x_is_enabled,
@@ -317,6 +349,7 @@ static struct regulator_ops da903x_regulator_ldo_ops = {
 static struct regulator_ops da9030_regulator_ldo14_ops = {
 	.set_voltage	= da9030_set_ldo14_voltage,
 	.get_voltage	= da9030_get_ldo14_voltage,
+	.list_voltage	= da903x_list_voltage,
 	.enable		= da903x_enable,
 	.disable	= da903x_disable,
 	.is_enabled	= da903x_is_enabled,
@@ -326,6 +359,7 @@ static struct regulator_ops da9030_regulator_ldo14_ops = {
 static struct regulator_ops da9030_regulator_ldo1_15_ops = {
 	.set_voltage	= da9030_set_ldo1_15_voltage,
 	.get_voltage	= da903x_get_voltage,
+	.list_voltage	= da903x_list_voltage,
 	.enable		= da903x_enable,
 	.disable	= da903x_disable,
 	.is_enabled	= da903x_is_enabled,
@@ -334,6 +368,7 @@ static struct regulator_ops da9030_regulator_ldo1_15_ops = {
 static struct regulator_ops da9034_regulator_dvc_ops = {
 	.set_voltage	= da9034_set_dvc_voltage,
 	.get_voltage	= da903x_get_voltage,
+	.list_voltage	= da903x_list_voltage,
 	.enable		= da903x_enable,
 	.disable	= da903x_disable,
 	.is_enabled	= da903x_is_enabled,
@@ -343,6 +378,7 @@ static struct regulator_ops da9034_regulator_dvc_ops = {
 static struct regulator_ops da9034_regulator_ldo12_ops = {
 	.set_voltage	= da9034_set_ldo12_voltage,
 	.get_voltage	= da9034_get_ldo12_voltage,
+	.list_voltage	= da9034_list_ldo12_voltage,
 	.enable		= da903x_enable,
 	.disable	= da903x_disable,
 	.is_enabled	= da903x_is_enabled,
@@ -355,6 +391,7 @@ static struct regulator_ops da9034_regulator_ldo12_ops = {
 		.ops	= &da903x_regulator_ldo_ops,			\
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= _pmic##_ID_LDO##_id,				\
+		.n_voltages = (step) ? ((max - min) / step + 1) : 1,	\
 		.owner	= THIS_MODULE,					\
 	},								\
 	.min_uV		= (min) * 1000,					\
@@ -367,24 +404,25 @@ static struct regulator_ops da9034_regulator_ldo12_ops = {
 	.enable_bit	= (ebit),					\
 }
 
-#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+#define DA903x_DVC(_pmic, _id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
 {									\
 	.desc	= {							\
 		.name	= #_id,						\
 		.ops	= &da9034_regulator_dvc_ops,			\
 		.type	= REGULATOR_VOLTAGE,				\
-		.id	= DA9034_ID_##_id,				\
+		.id	= _pmic##_ID_##_id,				\
+		.n_voltages = (step) ? ((max - min) / step + 1) : 1,	\
 		.owner	= THIS_MODULE,					\
 	},								\
 	.min_uV		= (min) * 1000,					\
 	.max_uV		= (max) * 1000,					\
 	.step_uV	= (step) * 1000,				\
-	.vol_reg	= DA9034_##vreg,				\
+	.vol_reg	= _pmic##_##vreg,				\
 	.vol_shift	= (0),						\
 	.vol_nbits	= (nbits),					\
-	.update_reg	= DA9034_##ureg,				\
+	.update_reg	= _pmic##_##ureg,				\
 	.update_bit	= (ubit),					\
-	.enable_reg	= DA9034_##ereg,				\
+	.enable_reg	= _pmic##_##ereg,				\
 	.enable_bit	= (ebit),					\
 }
 
@@ -394,8 +432,22 @@ static struct regulator_ops da9034_regulator_ldo12_ops = {
 #define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit)	\
 	DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit)
 
+#define DA9030_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+	DA903x_DVC(DA9030, _id, min, max, step, vreg, nbits, ureg, ubit, \
+		   ereg, ebit)
+
+#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+	DA903x_DVC(DA9034, _id, min, max, step, vreg, nbits, ureg, ubit, \
+		   ereg, ebit)
+
+#define DA9035_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+	DA903x_DVC(DA9035, _id, min, max, step, vreg, nbits, ureg, ubit, \
+		   ereg, ebit)
+
 static struct da903x_regulator_info da903x_regulator_info[] = {
 	/* DA9030 */
+	DA9030_DVC(BUCK2, 850, 1625, 25, BUCK2DVM1, 5, BUCK2DVM1, 7, RCTL11, 0),
+
 	DA9030_LDO( 1, 1200, 3200, 100,    LDO1, 0, 5, RCTL12, 1),
 	DA9030_LDO( 2, 1800, 3200, 100,   LDO23, 0, 4, RCTL12, 2),
 	DA9030_LDO( 3, 1800, 3200, 100,   LDO23, 4, 4, RCTL12, 3),
@@ -417,9 +469,9 @@ static struct da903x_regulator_info da903x_regulator_info[] = {
 	DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */
 
 	/* DA9034 */
-	DA9034_DVC(BUCK1, 725, 1500, 25, ADTV1, 5, VCC1, 0, OVER1, 0),
-	DA9034_DVC(BUCK2, 725, 1500, 25, CDTV1, 5, VCC1, 2, OVER1, 1),
-	DA9034_DVC(LDO2,  725, 1500, 25, SDTV1, 5, VCC1, 4, OVER1, 2),
+	DA9034_DVC(BUCK1, 725, 1500, 25, ADTV2, 5, VCC1, 0, OVER1, 0),
+	DA9034_DVC(BUCK2, 725, 1500, 25, CDTV2, 5, VCC1, 2, OVER1, 1),
+	DA9034_DVC(LDO2,  725, 1500, 25, SDTV2, 5, VCC1, 4, OVER1, 2),
 	DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4),
 
 	DA9034_LDO( 3, 1800, 3300, 100,  LDO643, 0, 4, OVER3, 5),
@@ -435,6 +487,9 @@ static struct da903x_regulator_info da903x_regulator_info[] = {
 	DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0),
 	DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1),
 	DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */
+
+	/* DA9035 */
+	DA9035_DVC(BUCK3, 1800, 2200, 100, 3DTV1, 3, VCC2, 0, OVER3, 3),
 };
 
 static inline struct da903x_regulator_info *find_regulator_info(int id)
@@ -462,8 +517,10 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev)
 	}
 
 	/* Workaround for the weird LDO12 voltage setting */
-	if (ri->desc.id == DA9034_ID_LDO12)
+	if (ri->desc.id == DA9034_ID_LDO12) {
 		ri->desc.ops = &da9034_regulator_ldo12_ops;
+		ri->desc.n_voltages = ARRAY_SIZE(da9034_ldo12_data);
+	}
 
 	if (ri->desc.id == DA9030_ID_LDO14)
 		ri->desc.ops = &da9030_regulator_ldo14_ops;
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index cdc674fb46c..f8b295700d7 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -5,6 +5,9 @@
  *
  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
  *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of the
@@ -20,20 +23,45 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/fixed.h>
+#include <linux/gpio.h>
 
 struct fixed_voltage_data {
 	struct regulator_desc desc;
 	struct regulator_dev *dev;
 	int microvolts;
+	int gpio;
+	unsigned enable_high:1;
+	unsigned is_enabled:1;
 };
 
 static int fixed_voltage_is_enabled(struct regulator_dev *dev)
 {
-	return 1;
+	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+	return data->is_enabled;
 }
 
 static int fixed_voltage_enable(struct regulator_dev *dev)
 {
+	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+	if (gpio_is_valid(data->gpio)) {
+		gpio_set_value_cansleep(data->gpio, data->enable_high);
+		data->is_enabled = 1;
+	}
+
+	return 0;
+}
+
+static int fixed_voltage_disable(struct regulator_dev *dev)
+{
+	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+	if (gpio_is_valid(data->gpio)) {
+		gpio_set_value_cansleep(data->gpio, !data->enable_high);
+		data->is_enabled = 0;
+	}
+
 	return 0;
 }
 
@@ -58,6 +86,7 @@ static int fixed_voltage_list_voltage(struct regulator_dev *dev,
 static struct regulator_ops fixed_voltage_ops = {
 	.is_enabled = fixed_voltage_is_enabled,
 	.enable = fixed_voltage_enable,
+	.disable = fixed_voltage_disable,
 	.get_voltage = fixed_voltage_get_voltage,
 	.list_voltage = fixed_voltage_list_voltage,
 };
@@ -70,12 +99,14 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
 
 	drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
 	if (drvdata == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate device data\n");
 		ret = -ENOMEM;
 		goto err;
 	}
 
 	drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
 	if (drvdata->desc.name == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate supply name\n");
 		ret = -ENOMEM;
 		goto err;
 	}
@@ -85,12 +116,62 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
 	drvdata->desc.n_voltages = 1;
 
 	drvdata->microvolts = config->microvolts;
+	drvdata->gpio = config->gpio;
+
+	if (gpio_is_valid(config->gpio)) {
+		drvdata->enable_high = config->enable_high;
+
+		/* FIXME: Remove below print warning
+		 *
+		 * config->gpio must be set to -EINVAL by platform code if
+		 * GPIO control is not required. However, early adopters
+		 * not requiring GPIO control may forget to initialize
+		 * config->gpio to -EINVAL. This will cause GPIO 0 to be used
+		 * for GPIO control.
+		 *
+		 * This warning will be removed once there are a couple of users
+		 * for this driver.
+		 */
+		if (!config->gpio)
+			dev_warn(&pdev->dev,
+				"using GPIO 0 for regulator enable control\n");
+
+		ret = gpio_request(config->gpio, config->supply_name);
+		if (ret) {
+			dev_err(&pdev->dev,
+			   "Could not obtain regulator enable GPIO %d: %d\n",
+							config->gpio, ret);
+			goto err_name;
+		}
+
+		/* set output direction without changing state
+		 * to prevent glitch
+		 */
+		drvdata->is_enabled = config->enabled_at_boot;
+		ret = drvdata->is_enabled ?
+				config->enable_high : !config->enable_high;
+
+		ret = gpio_direction_output(config->gpio, ret);
+		if (ret) {
+			dev_err(&pdev->dev,
+			   "Could not configure regulator enable GPIO %d direction: %d\n",
+							config->gpio, ret);
+			goto err_gpio;
+		}
+
+	} else {
+		/* Regulator without GPIO control is considered
+		 * always enabled
+		 */
+		drvdata->is_enabled = 1;
+	}
 
 	drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
 					  config->init_data, drvdata);
 	if (IS_ERR(drvdata->dev)) {
 		ret = PTR_ERR(drvdata->dev);
-		goto err_name;
+		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+		goto err_gpio;
 	}
 
 	platform_set_drvdata(pdev, drvdata);
@@ -100,6 +181,9 @@ static int regulator_fixed_voltage_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_gpio:
+	if (gpio_is_valid(config->gpio))
+		gpio_free(config->gpio);
 err_name:
 	kfree(drvdata->desc.name);
 err:
@@ -115,6 +199,9 @@ static int regulator_fixed_voltage_remove(struct platform_device *pdev)
 	kfree(drvdata->desc.name);
 	kfree(drvdata);
 
+	if (gpio_is_valid(drvdata->gpio))
+		gpio_free(drvdata->gpio);
+
 	return 0;
 }
 
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index a61018a2769..7803a320543 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -541,7 +541,7 @@ static struct i2c_driver lp3971_i2c_driver = {
 
 static int __init lp3971_module_init(void)
 {
-	int ret = -ENODEV;
+	int ret;
 
 	ret = i2c_add_driver(&lp3971_i2c_driver);
 	if (ret != 0)
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index 8e14900eb68..0803ffe6236 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -24,11 +24,12 @@
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/pmic.h>
 
-#define PCF50633_REGULATOR(_name, _id) 		\
+#define PCF50633_REGULATOR(_name, _id, _n) 		\
 	{					\
 		.name = _name, 			\
 		.id = _id,			\
 		.ops = &pcf50633_regulator_ops,	\
+		.n_voltages = _n, \
 		.type = REGULATOR_VOLTAGE, 	\
 		.owner = THIS_MODULE, 		\
 	}
@@ -149,33 +150,20 @@ static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
 	return pcf50633_reg_write(pcf, regnr, volt_bits);
 }
 
-static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
+static int pcf50633_regulator_voltage_value(enum pcf50633_regulator_id id,
+						u8 bits)
 {
-	struct pcf50633 *pcf;
-	int regulator_id, millivolts, volt_bits;
-	u8 regnr;
-
-	pcf = rdev_get_drvdata(rdev);;
+	int millivolts;
 
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= PCF50633_NUM_REGULATORS)
-		return -EINVAL;
-
-	regnr = pcf50633_regulator_registers[regulator_id];
-
-	volt_bits = pcf50633_reg_read(pcf, regnr);
-	if (volt_bits < 0)
-		return -1;
-
-	switch (regulator_id) {
+	switch (id) {
 	case PCF50633_REGULATOR_AUTO:
-		millivolts = auto_voltage_value(volt_bits);
+		millivolts = auto_voltage_value(bits);
 		break;
 	case PCF50633_REGULATOR_DOWN1:
-		millivolts = down_voltage_value(volt_bits);
+		millivolts = down_voltage_value(bits);
 		break;
 	case PCF50633_REGULATOR_DOWN2:
-		millivolts = down_voltage_value(volt_bits);
+		millivolts = down_voltage_value(bits);
 		break;
 	case PCF50633_REGULATOR_LDO1:
 	case PCF50633_REGULATOR_LDO2:
@@ -184,7 +172,7 @@ static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
 	case PCF50633_REGULATOR_LDO5:
 	case PCF50633_REGULATOR_LDO6:
 	case PCF50633_REGULATOR_HCLDO:
-		millivolts = ldo_voltage_value(volt_bits);
+		millivolts = ldo_voltage_value(bits);
 		break;
 	default:
 		return -EINVAL;
@@ -193,6 +181,49 @@ static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
 	return millivolts * 1000;
 }
 
+static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	struct pcf50633 *pcf;
+	int regulator_id;
+	u8 volt_bits, regnr;
+
+	pcf = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= PCF50633_NUM_REGULATORS)
+		return -EINVAL;
+
+	regnr = pcf50633_regulator_registers[regulator_id];
+
+	volt_bits = pcf50633_reg_read(pcf, regnr);
+
+	return pcf50633_regulator_voltage_value(regulator_id, volt_bits);
+}
+
+static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
+						unsigned int index)
+{
+	struct pcf50633 *pcf;
+	int regulator_id;
+
+	pcf = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+
+	switch (regulator_id) {
+	case PCF50633_REGULATOR_AUTO:
+		index += 0x2f;
+		break;
+	case PCF50633_REGULATOR_HCLDO:
+		index += 0x01;
+		break;
+	default:
+		break;
+	}
+
+	return pcf50633_regulator_voltage_value(regulator_id, index);
+}
+
 static int pcf50633_regulator_enable(struct regulator_dev *rdev)
 {
 	struct pcf50633 *pcf = rdev_get_drvdata(rdev);
@@ -246,6 +277,7 @@ static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev)
 static struct regulator_ops pcf50633_regulator_ops = {
 	.set_voltage = pcf50633_regulator_set_voltage,
 	.get_voltage = pcf50633_regulator_get_voltage,
+	.list_voltage = pcf50633_regulator_list_voltage,
 	.enable = pcf50633_regulator_enable,
 	.disable = pcf50633_regulator_disable,
 	.is_enabled = pcf50633_regulator_is_enabled,
@@ -253,27 +285,27 @@ static struct regulator_ops pcf50633_regulator_ops = {
 
 static struct regulator_desc regulators[] = {
 	[PCF50633_REGULATOR_AUTO] =
-		PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO),
+		PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO, 80),
 	[PCF50633_REGULATOR_DOWN1] =
-		PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1),
+		PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1, 95),
 	[PCF50633_REGULATOR_DOWN2] =
-		PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2),
+		PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2, 95),
 	[PCF50633_REGULATOR_LDO1] =
-		PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1),
+		PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1, 27),
 	[PCF50633_REGULATOR_LDO2] =
-		PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2),
+		PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2, 27),
 	[PCF50633_REGULATOR_LDO3] =
-		PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3),
+		PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3, 27),
 	[PCF50633_REGULATOR_LDO4] =
-		PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4),
+		PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4, 27),
 	[PCF50633_REGULATOR_LDO5] =
-		PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5),
+		PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5, 27),
 	[PCF50633_REGULATOR_LDO6] =
-		PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6),
+		PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6, 27),
 	[PCF50633_REGULATOR_HCLDO] =
-		PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO),
+		PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO, 26),
 	[PCF50633_REGULATOR_MEMLDO] =
-		PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO),
+		PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO, 0),
 };
 
 static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
new file mode 100644
index 00000000000..07fda0a75ad
--- /dev/null
+++ b/drivers/regulator/tps65023-regulator.c
@@ -0,0 +1,632 @@
+/*
+ * tps65023-regulator.c
+ *
+ * Supports TPS65023 Regulator
+ *
+ * Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+
+/* Register definitions */
+#define	TPS65023_REG_VERSION		0
+#define	TPS65023_REG_PGOODZ		1
+#define	TPS65023_REG_MASK		2
+#define	TPS65023_REG_REG_CTRL		3
+#define	TPS65023_REG_CON_CTRL		4
+#define	TPS65023_REG_CON_CTRL2		5
+#define	TPS65023_REG_DEF_CORE		6
+#define	TPS65023_REG_DEFSLEW		7
+#define	TPS65023_REG_LDO_CTRL		8
+
+/* PGOODZ bitfields */
+#define	TPS65023_PGOODZ_PWRFAILZ	BIT(7)
+#define	TPS65023_PGOODZ_LOWBATTZ	BIT(6)
+#define	TPS65023_PGOODZ_VDCDC1		BIT(5)
+#define	TPS65023_PGOODZ_VDCDC2		BIT(4)
+#define	TPS65023_PGOODZ_VDCDC3		BIT(3)
+#define	TPS65023_PGOODZ_LDO2		BIT(2)
+#define	TPS65023_PGOODZ_LDO1		BIT(1)
+
+/* MASK bitfields */
+#define	TPS65023_MASK_PWRFAILZ		BIT(7)
+#define	TPS65023_MASK_LOWBATTZ		BIT(6)
+#define	TPS65023_MASK_VDCDC1		BIT(5)
+#define	TPS65023_MASK_VDCDC2		BIT(4)
+#define	TPS65023_MASK_VDCDC3		BIT(3)
+#define	TPS65023_MASK_LDO2		BIT(2)
+#define	TPS65023_MASK_LDO1		BIT(1)
+
+/* REG_CTRL bitfields */
+#define TPS65023_REG_CTRL_VDCDC1_EN	BIT(5)
+#define TPS65023_REG_CTRL_VDCDC2_EN	BIT(4)
+#define TPS65023_REG_CTRL_VDCDC3_EN	BIT(3)
+#define TPS65023_REG_CTRL_LDO2_EN	BIT(2)
+#define TPS65023_REG_CTRL_LDO1_EN	BIT(1)
+
+/* LDO_CTRL bitfields */
+#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id)	((ldo_id)*4)
+#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id)	(0xF0 >> ((ldo_id)*4))
+
+/* Number of step-down converters available */
+#define TPS65023_NUM_DCDC		3
+/* Number of LDO voltage regulators  available */
+#define TPS65023_NUM_LDO		2
+/* Number of total regulators available */
+#define TPS65023_NUM_REGULATOR	(TPS65023_NUM_DCDC + TPS65023_NUM_LDO)
+
+/* DCDCs */
+#define TPS65023_DCDC_1			0
+#define TPS65023_DCDC_2			1
+#define TPS65023_DCDC_3			2
+/* LDOs */
+#define TPS65023_LDO_1			3
+#define TPS65023_LDO_2			4
+
+#define TPS65023_MAX_REG_ID		TPS65023_LDO_2
+
+/* Supported voltage values for regulators */
+static const u16 VDCDC1_VSEL_table[] = {
+	800, 825, 850, 875,
+	900, 925, 950, 975,
+	1000, 1025, 1050, 1075,
+	1100, 1125, 1150, 1175,
+	1200, 1225, 1250, 1275,
+	1300, 1325, 1350, 1375,
+	1400, 1425, 1450, 1475,
+	1500, 1525, 1550, 1600,
+};
+
+static const u16 LDO1_VSEL_table[] = {
+	1000, 1100, 1300, 1800,
+	2200, 2600, 2800, 3150,
+};
+
+static const u16 LDO2_VSEL_table[] = {
+	1050, 1200, 1300, 1800,
+	2500, 2800, 3000, 3300,
+};
+
+static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDC1_VSEL_table),
+				0, 0, ARRAY_SIZE(LDO1_VSEL_table),
+				ARRAY_SIZE(LDO2_VSEL_table)};
+
+/* Regulator specific details */
+struct tps_info {
+	const char *name;
+	unsigned min_uV;
+	unsigned max_uV;
+	bool fixed;
+	u8 table_len;
+	const u16 *table;
+};
+
+/* PMIC details */
+struct tps_pmic {
+	struct regulator_desc desc[TPS65023_NUM_REGULATOR];
+	struct i2c_client *client;
+	struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
+	const struct tps_info *info[TPS65023_NUM_REGULATOR];
+	struct mutex io_lock;
+};
+
+static inline int tps_65023_read(struct tps_pmic *tps, u8 reg)
+{
+	return i2c_smbus_read_byte_data(tps->client, reg);
+}
+
+static inline int tps_65023_write(struct tps_pmic *tps, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(tps->client, reg, val);
+}
+
+static int tps_65023_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
+{
+	int err, data;
+
+	mutex_lock(&tps->io_lock);
+
+	data = tps_65023_read(tps, reg);
+	if (data < 0) {
+		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+		err = data;
+		goto out;
+	}
+
+	data |= mask;
+	err = tps_65023_write(tps, reg, data);
+	if (err)
+		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+
+out:
+	mutex_unlock(&tps->io_lock);
+	return err;
+}
+
+static int tps_65023_clear_bits(struct tps_pmic *tps, u8 reg, u8 mask)
+{
+	int err, data;
+
+	mutex_lock(&tps->io_lock);
+
+	data = tps_65023_read(tps, reg);
+	if (data < 0) {
+		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+		err = data;
+		goto out;
+	}
+
+	data &= ~mask;
+
+	err = tps_65023_write(tps, reg, data);
+	if (err)
+		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+
+out:
+	mutex_unlock(&tps->io_lock);
+	return err;
+
+}
+
+static int tps_65023_reg_read(struct tps_pmic *tps, u8 reg)
+{
+	int data;
+
+	mutex_lock(&tps->io_lock);
+
+	data = tps_65023_read(tps, reg);
+	if (data < 0)
+		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+
+	mutex_unlock(&tps->io_lock);
+	return data;
+}
+
+static int tps_65023_reg_write(struct tps_pmic *tps, u8 reg, u8 val)
+{
+	int err;
+
+	mutex_lock(&tps->io_lock);
+
+	err = tps_65023_write(tps, reg, val);
+	if (err < 0)
+		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+
+	mutex_unlock(&tps->io_lock);
+	return err;
+}
+
+static int tps65023_dcdc_is_enabled(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, dcdc = rdev_get_id(dev);
+	u8 shift;
+
+	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
+		return -EINVAL;
+
+	shift = TPS65023_NUM_REGULATOR - dcdc;
+	data = tps_65023_reg_read(tps, TPS65023_REG_REG_CTRL);
+
+	if (data < 0)
+		return data;
+	else
+		return (data & 1<<shift) ? 1 : 0;
+}
+
+static int tps65023_ldo_is_enabled(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, ldo = rdev_get_id(dev);
+	u8 shift;
+
+	if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
+		return -EINVAL;
+
+	shift = (ldo == TPS65023_LDO_1 ? 1 : 2);
+	data = tps_65023_reg_read(tps, TPS65023_REG_REG_CTRL);
+
+	if (data < 0)
+		return data;
+	else
+		return (data & 1<<shift) ? 1 : 0;
+}
+
+static int tps65023_dcdc_enable(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int dcdc = rdev_get_id(dev);
+	u8 shift;
+
+	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
+		return -EINVAL;
+
+	shift = TPS65023_NUM_REGULATOR - dcdc;
+	return tps_65023_set_bits(tps, TPS65023_REG_REG_CTRL, 1 << shift);
+}
+
+static int tps65023_dcdc_disable(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int dcdc = rdev_get_id(dev);
+	u8 shift;
+
+	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
+		return -EINVAL;
+
+	shift = TPS65023_NUM_REGULATOR - dcdc;
+	return tps_65023_clear_bits(tps, TPS65023_REG_REG_CTRL, 1 << shift);
+}
+
+static int tps65023_ldo_enable(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev);
+	u8 shift;
+
+	if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
+		return -EINVAL;
+
+	shift = (ldo == TPS65023_LDO_1 ? 1 : 2);
+	return tps_65023_set_bits(tps, TPS65023_REG_REG_CTRL, 1 << shift);
+}
+
+static int tps65023_ldo_disable(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev);
+	u8 shift;
+
+	if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
+		return -EINVAL;
+
+	shift = (ldo == TPS65023_LDO_1 ? 1 : 2);
+	return tps_65023_clear_bits(tps, TPS65023_REG_REG_CTRL, 1 << shift);
+}
+
+static int tps65023_dcdc_get_voltage(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, dcdc = rdev_get_id(dev);
+
+	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
+		return -EINVAL;
+
+	if (dcdc == TPS65023_DCDC_1) {
+		data = tps_65023_reg_read(tps, TPS65023_REG_DEF_CORE);
+		if (data < 0)
+			return data;
+		data &= (tps->info[dcdc]->table_len - 1);
+		return tps->info[dcdc]->table[data] * 1000;
+	} else
+		return tps->info[dcdc]->min_uV;
+}
+
+static int tps65023_dcdc_set_voltage(struct regulator_dev *dev,
+				int min_uV, int max_uV)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int dcdc = rdev_get_id(dev);
+	int vsel;
+
+	if (dcdc != TPS65023_DCDC_1)
+		return -EINVAL;
+
+	if (min_uV < tps->info[dcdc]->min_uV
+			|| min_uV > tps->info[dcdc]->max_uV)
+		return -EINVAL;
+	if (max_uV < tps->info[dcdc]->min_uV
+			|| max_uV > tps->info[dcdc]->max_uV)
+		return -EINVAL;
+
+	for (vsel = 0; vsel < tps->info[dcdc]->table_len; vsel++) {
+		int mV = tps->info[dcdc]->table[vsel];
+		int uV = mV * 1000;
+
+		/* Break at the first in-range value */
+		if (min_uV <= uV && uV <= max_uV)
+			break;
+	}
+
+	/* write to the register in case we found a match */
+	if (vsel == tps->info[dcdc]->table_len)
+		return -EINVAL;
+	else
+		return tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+}
+
+static int tps65023_ldo_get_voltage(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, ldo = rdev_get_id(dev);
+
+	if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
+		return -EINVAL;
+
+	data = tps_65023_reg_read(tps, TPS65023_REG_LDO_CTRL);
+	if (data < 0)
+		return data;
+
+	data >>= (TPS65023_LDO_CTRL_LDOx_SHIFT(ldo - TPS65023_LDO_1));
+	data &= (tps->info[ldo]->table_len - 1);
+	return tps->info[ldo]->table[data] * 1000;
+}
+
+static int tps65023_ldo_set_voltage(struct regulator_dev *dev,
+				int min_uV, int max_uV)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, vsel, ldo = rdev_get_id(dev);
+
+	if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
+		return -EINVAL;
+
+	if (min_uV < tps->info[ldo]->min_uV || min_uV > tps->info[ldo]->max_uV)
+		return -EINVAL;
+	if (max_uV < tps->info[ldo]->min_uV || max_uV > tps->info[ldo]->max_uV)
+		return -EINVAL;
+
+	for (vsel = 0; vsel < tps->info[ldo]->table_len; vsel++) {
+		int mV = tps->info[ldo]->table[vsel];
+		int uV = mV * 1000;
+
+		/* Break at the first in-range value */
+		if (min_uV <= uV && uV <= max_uV)
+			break;
+	}
+
+	if (vsel == tps->info[ldo]->table_len)
+		return -EINVAL;
+
+	data = tps_65023_reg_read(tps, TPS65023_REG_LDO_CTRL);
+	if (data < 0)
+		return data;
+
+	data &= TPS65023_LDO_CTRL_LDOx_MASK(ldo - TPS65023_LDO_1);
+	data |= (vsel << (TPS65023_LDO_CTRL_LDOx_SHIFT(ldo - TPS65023_LDO_1)));
+	return tps_65023_reg_write(tps, TPS65023_REG_LDO_CTRL, data);
+}
+
+static int tps65023_dcdc_list_voltage(struct regulator_dev *dev,
+					unsigned selector)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int dcdc = rdev_get_id(dev);
+
+	if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
+		return -EINVAL;
+
+	if (dcdc == TPS65023_DCDC_1) {
+		if (selector >= tps->info[dcdc]->table_len)
+			return -EINVAL;
+		else
+			return tps->info[dcdc]->table[selector] * 1000;
+	} else
+		return tps->info[dcdc]->min_uV;
+}
+
+static int tps65023_ldo_list_voltage(struct regulator_dev *dev,
+					unsigned selector)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev);
+
+	if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
+		return -EINVAL;
+
+	if (selector >= tps->info[ldo]->table_len)
+		return -EINVAL;
+	else
+		return tps->info[ldo]->table[selector] * 1000;
+}
+
+/* Operations permitted on VDCDCx */
+static struct regulator_ops tps65023_dcdc_ops = {
+	.is_enabled = tps65023_dcdc_is_enabled,
+	.enable = tps65023_dcdc_enable,
+	.disable = tps65023_dcdc_disable,
+	.get_voltage = tps65023_dcdc_get_voltage,
+	.set_voltage = tps65023_dcdc_set_voltage,
+	.list_voltage = tps65023_dcdc_list_voltage,
+};
+
+/* Operations permitted on LDOx */
+static struct regulator_ops tps65023_ldo_ops = {
+	.is_enabled = tps65023_ldo_is_enabled,
+	.enable = tps65023_ldo_enable,
+	.disable = tps65023_ldo_disable,
+	.get_voltage = tps65023_ldo_get_voltage,
+	.set_voltage = tps65023_ldo_set_voltage,
+	.list_voltage = tps65023_ldo_list_voltage,
+};
+
+static
+int tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	static int desc_id;
+	const struct tps_info *info = (void *)id->driver_data;
+	struct regulator_init_data *init_data;
+	struct regulator_dev *rdev;
+	struct tps_pmic *tps;
+	int i;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	/**
+	 * init_data points to array of regulator_init structures
+	 * coming from the board-evm file.
+	 */
+	init_data = client->dev.platform_data;
+
+	if (!init_data)
+		return -EIO;
+
+	tps = kzalloc(sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	mutex_init(&tps->io_lock);
+
+	/* common for all regulators */
+	tps->client = client;
+
+	for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
+		/* Store regulator specific information */
+		tps->info[i] = info;
+
+		tps->desc[i].name = info->name;
+		tps->desc[i].id = desc_id++;
+		tps->desc[i].n_voltages = num_voltages[i];
+		tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
+					&tps65023_ldo_ops : &tps65023_dcdc_ops);
+		tps->desc[i].type = REGULATOR_VOLTAGE;
+		tps->desc[i].owner = THIS_MODULE;
+
+		/* Register the regulators */
+		rdev = regulator_register(&tps->desc[i], &client->dev,
+								init_data, tps);
+		if (IS_ERR(rdev)) {
+			dev_err(&client->dev, "failed to register %s\n",
+				id->name);
+
+			/* Unregister */
+			while (i)
+				regulator_unregister(tps->rdev[--i]);
+
+			tps->client = NULL;
+
+			/* clear the client data in i2c */
+			i2c_set_clientdata(client, NULL);
+			kfree(tps);
+			return PTR_ERR(rdev);
+		}
+
+		/* Save regulator for cleanup */
+		tps->rdev[i] = rdev;
+	}
+
+	i2c_set_clientdata(client, tps);
+
+	return 0;
+}
+
+/**
+ * tps_65023_remove - TPS65023 driver i2c remove handler
+ * @client: i2c driver client device structure
+ *
+ * Unregister TPS driver as an i2c client device driver
+ */
+static int __devexit tps_65023_remove(struct i2c_client *client)
+{
+	struct tps_pmic *tps = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < TPS65023_NUM_REGULATOR; i++)
+		regulator_unregister(tps->rdev[i]);
+
+	tps->client = NULL;
+
+	/* clear the client data in i2c */
+	i2c_set_clientdata(client, NULL);
+	kfree(tps);
+
+	return 0;
+}
+
+static const struct tps_info tps65023_regs[] = {
+	{
+		.name = "VDCDC1",
+		.min_uV =  800000,
+		.max_uV = 1600000,
+		.table_len = ARRAY_SIZE(VDCDC1_VSEL_table),
+		.table = VDCDC1_VSEL_table,
+	},
+	{
+		.name = "VDCDC2",
+		.min_uV =  3300000,
+		.max_uV = 3300000,
+		.fixed = 1,
+	},
+	{
+		.name = "VDCDC3",
+		.min_uV =  1800000,
+		.max_uV = 1800000,
+		.fixed = 1,
+	},
+	{
+		.name = "LDO1",
+		.min_uV = 1000000,
+		.max_uV = 3150000,
+		.table_len = ARRAY_SIZE(LDO1_VSEL_table),
+		.table = LDO1_VSEL_table,
+	},
+	{
+		.name = "LDO2",
+		.min_uV = 1050000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(LDO2_VSEL_table),
+		.table = LDO2_VSEL_table,
+	},
+};
+
+static const struct i2c_device_id tps_65023_id[] = {
+	{.name = "tps65023",
+	.driver_data = (unsigned long) tps65023_regs,},
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, tps_65023_id);
+
+static struct i2c_driver tps_65023_i2c_driver = {
+	.driver = {
+		.name = "tps65023",
+		.owner = THIS_MODULE,
+	},
+	.probe = tps_65023_probe,
+	.remove = __devexit_p(tps_65023_remove),
+	.id_table = tps_65023_id,
+};
+
+/**
+ * tps_65023_init
+ *
+ * Module init function
+ */
+static int __init tps_65023_init(void)
+{
+	return i2c_add_driver(&tps_65023_i2c_driver);
+}
+subsys_initcall(tps_65023_init);
+
+/**
+ * tps_65023_cleanup
+ *
+ * Module exit function
+ */
+static void __exit tps_65023_cleanup(void)
+{
+	i2c_del_driver(&tps_65023_i2c_driver);
+}
+module_exit(tps_65023_cleanup);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TPS65023 voltage regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
new file mode 100644
index 00000000000..f8a6dfbef75
--- /dev/null
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -0,0 +1,714 @@
+/*
+ * tps6507x-regulator.c
+ *
+ * Regulator driver for TPS65073 PMIC
+ *
+ * Copyright (C) 2009 Texas Instrument Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+
+/* Register definitions */
+#define	TPS6507X_REG_PPATH1				0X01
+#define	TPS6507X_REG_INT				0X02
+#define	TPS6507X_REG_CHGCONFIG0				0X03
+#define	TPS6507X_REG_CHGCONFIG1				0X04
+#define	TPS6507X_REG_CHGCONFIG2				0X05
+#define	TPS6507X_REG_CHGCONFIG3				0X06
+#define	TPS6507X_REG_REG_ADCONFIG			0X07
+#define	TPS6507X_REG_TSCMODE				0X08
+#define	TPS6507X_REG_ADRESULT_1				0X09
+#define	TPS6507X_REG_ADRESULT_2				0X0A
+#define	TPS6507X_REG_PGOOD				0X0B
+#define	TPS6507X_REG_PGOODMASK				0X0C
+#define	TPS6507X_REG_CON_CTRL1				0X0D
+#define	TPS6507X_REG_CON_CTRL2				0X0E
+#define	TPS6507X_REG_CON_CTRL3				0X0F
+#define	TPS6507X_REG_DEFDCDC1				0X10
+#define	TPS6507X_REG_DEFDCDC2_LOW			0X11
+#define	TPS6507X_REG_DEFDCDC2_HIGH			0X12
+#define	TPS6507X_REG_DEFDCDC3_LOW			0X13
+#define	TPS6507X_REG_DEFDCDC3_HIGH			0X14
+#define	TPS6507X_REG_DEFSLEW				0X15
+#define	TPS6507X_REG_LDO_CTRL1				0X16
+#define	TPS6507X_REG_DEFLDO2				0X17
+#define	TPS6507X_REG_WLED_CTRL1				0X18
+#define	TPS6507X_REG_WLED_CTRL2				0X19
+
+/* CON_CTRL1 bitfields */
+#define	TPS6507X_CON_CTRL1_DCDC1_ENABLE		BIT(4)
+#define	TPS6507X_CON_CTRL1_DCDC2_ENABLE		BIT(3)
+#define	TPS6507X_CON_CTRL1_DCDC3_ENABLE		BIT(2)
+#define	TPS6507X_CON_CTRL1_LDO1_ENABLE		BIT(1)
+#define	TPS6507X_CON_CTRL1_LDO2_ENABLE		BIT(0)
+
+/* DEFDCDC1 bitfields */
+#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN	BIT(7)
+#define TPS6507X_DEFDCDC1_DCDC1_MASK		0X3F
+
+/* DEFDCDC2_LOW bitfields */
+#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK	0X3F
+
+/* DEFDCDC2_HIGH bitfields */
+#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK	0X3F
+
+/* DEFDCDC3_LOW bitfields */
+#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK	0X3F
+
+/* DEFDCDC3_HIGH bitfields */
+#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK	0X3F
+
+/* TPS6507X_REG_LDO_CTRL1 bitfields */
+#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK	0X0F
+
+/* TPS6507X_REG_DEFLDO2 bitfields */
+#define TPS6507X_REG_DEFLDO2_LDO2_MASK		0X3F
+
+/* VDCDC MASK */
+#define TPS6507X_DEFDCDCX_DCDC_MASK		0X3F
+
+/* DCDC's */
+#define TPS6507X_DCDC_1				0
+#define TPS6507X_DCDC_2				1
+#define TPS6507X_DCDC_3				2
+/* LDOs */
+#define TPS6507X_LDO_1				3
+#define TPS6507X_LDO_2				4
+
+#define TPS6507X_MAX_REG_ID			TPS6507X_LDO_2
+
+/* Number of step-down converters available */
+#define TPS6507X_NUM_DCDC			3
+/* Number of LDO voltage regulators  available */
+#define TPS6507X_NUM_LDO			2
+/* Number of total regulators available */
+#define TPS6507X_NUM_REGULATOR		(TPS6507X_NUM_DCDC + TPS6507X_NUM_LDO)
+
+/* Supported voltage values for regulators (in milliVolts) */
+static const u16 VDCDCx_VSEL_table[] = {
+	725, 750, 775, 800,
+	825, 850, 875, 900,
+	925, 950, 975, 1000,
+	1025, 1050, 1075, 1100,
+	1125, 1150, 1175, 1200,
+	1225, 1250, 1275, 1300,
+	1325, 1350, 1375, 1400,
+	1425, 1450, 1475, 1500,
+	1550, 1600, 1650, 1700,
+	1750, 1800, 1850, 1900,
+	1950, 2000, 2050, 2100,
+	2150, 2200, 2250, 2300,
+	2350, 2400, 2450, 2500,
+	2550, 2600, 2650, 2700,
+	2750, 2800, 2850, 2900,
+	3000, 3100, 3200, 3300,
+};
+
+static const u16 LDO1_VSEL_table[] = {
+	1000, 1100, 1200, 1250,
+	1300, 1350, 1400, 1500,
+	1600, 1800, 2500, 2750,
+	2800, 3000, 3100, 3300,
+};
+
+static const u16 LDO2_VSEL_table[] = {
+	725, 750, 775, 800,
+	825, 850, 875, 900,
+	925, 950, 975, 1000,
+	1025, 1050, 1075, 1100,
+	1125, 1150, 1175, 1200,
+	1225, 1250, 1275, 1300,
+	1325, 1350, 1375, 1400,
+	1425, 1450, 1475, 1500,
+	1550, 1600, 1650, 1700,
+	1750, 1800, 1850, 1900,
+	1950, 2000, 2050, 2100,
+	2150, 2200, 2250, 2300,
+	2350, 2400, 2450, 2500,
+	2550, 2600, 2650, 2700,
+	2750, 2800, 2850, 2900,
+	3000, 3100, 3200, 3300,
+};
+
+static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDCx_VSEL_table),
+				ARRAY_SIZE(VDCDCx_VSEL_table),
+				ARRAY_SIZE(VDCDCx_VSEL_table),
+				ARRAY_SIZE(LDO1_VSEL_table),
+				ARRAY_SIZE(LDO2_VSEL_table)};
+
+struct tps_info {
+	const char *name;
+	unsigned min_uV;
+	unsigned max_uV;
+	u8 table_len;
+	const u16 *table;
+};
+
+struct tps_pmic {
+	struct regulator_desc desc[TPS6507X_NUM_REGULATOR];
+	struct i2c_client *client;
+	struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR];
+	const struct tps_info *info[TPS6507X_NUM_REGULATOR];
+	struct mutex io_lock;
+};
+
+static inline int tps_6507x_read(struct tps_pmic *tps, u8 reg)
+{
+	return i2c_smbus_read_byte_data(tps->client, reg);
+}
+
+static inline int tps_6507x_write(struct tps_pmic *tps, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(tps->client, reg, val);
+}
+
+static int tps_6507x_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
+{
+	int err, data;
+
+	mutex_lock(&tps->io_lock);
+
+	data = tps_6507x_read(tps, reg);
+	if (data < 0) {
+		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+		err = data;
+		goto out;
+	}
+
+	data |= mask;
+	err = tps_6507x_write(tps, reg, data);
+	if (err)
+		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+
+out:
+	mutex_unlock(&tps->io_lock);
+	return err;
+}
+
+static int tps_6507x_clear_bits(struct tps_pmic *tps, u8 reg, u8 mask)
+{
+	int err, data;
+
+	mutex_lock(&tps->io_lock);
+
+	data = tps_6507x_read(tps, reg);
+	if (data < 0) {
+		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+		err = data;
+		goto out;
+	}
+
+	data &= ~mask;
+	err = tps_6507x_write(tps, reg, data);
+	if (err)
+		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+
+out:
+	mutex_unlock(&tps->io_lock);
+	return err;
+}
+
+static int tps_6507x_reg_read(struct tps_pmic *tps, u8 reg)
+{
+	int data;
+
+	mutex_lock(&tps->io_lock);
+
+	data = tps_6507x_read(tps, reg);
+	if (data < 0)
+		dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
+
+	mutex_unlock(&tps->io_lock);
+	return data;
+}
+
+static int tps_6507x_reg_write(struct tps_pmic *tps, u8 reg, u8 val)
+{
+	int err;
+
+	mutex_lock(&tps->io_lock);
+
+	err = tps_6507x_write(tps, reg, val);
+	if (err < 0)
+		dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
+
+	mutex_unlock(&tps->io_lock);
+	return err;
+}
+
+static int tps6507x_dcdc_is_enabled(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, dcdc = rdev_get_id(dev);
+	u8 shift;
+
+	if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
+		return -EINVAL;
+
+	shift = TPS6507X_MAX_REG_ID - dcdc;
+	data = tps_6507x_reg_read(tps, TPS6507X_REG_CON_CTRL1);
+
+	if (data < 0)
+		return data;
+	else
+		return (data & 1<<shift) ? 1 : 0;
+}
+
+static int tps6507x_ldo_is_enabled(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, ldo = rdev_get_id(dev);
+	u8 shift;
+
+	if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+		return -EINVAL;
+
+	shift = TPS6507X_MAX_REG_ID - ldo;
+	data = tps_6507x_reg_read(tps, TPS6507X_REG_CON_CTRL1);
+
+	if (data < 0)
+		return data;
+	else
+		return (data & 1<<shift) ? 1 : 0;
+}
+
+static int tps6507x_dcdc_enable(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int dcdc = rdev_get_id(dev);
+	u8 shift;
+
+	if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
+		return -EINVAL;
+
+	shift = TPS6507X_MAX_REG_ID - dcdc;
+	return tps_6507x_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+}
+
+static int tps6507x_dcdc_disable(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int dcdc = rdev_get_id(dev);
+	u8 shift;
+
+	if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
+		return -EINVAL;
+
+	shift = TPS6507X_MAX_REG_ID - dcdc;
+	return tps_6507x_clear_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+}
+
+static int tps6507x_ldo_enable(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev);
+	u8 shift;
+
+	if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+		return -EINVAL;
+
+	shift = TPS6507X_MAX_REG_ID - ldo;
+	return tps_6507x_set_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+}
+
+static int tps6507x_ldo_disable(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev);
+	u8 shift;
+
+	if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+		return -EINVAL;
+
+	shift = TPS6507X_MAX_REG_ID - ldo;
+	return tps_6507x_clear_bits(tps, TPS6507X_REG_CON_CTRL1, 1 << shift);
+}
+
+static int tps6507x_dcdc_get_voltage(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, dcdc = rdev_get_id(dev);
+	u8 reg;
+
+	switch (dcdc) {
+	case TPS6507X_DCDC_1:
+		reg = TPS6507X_REG_DEFDCDC1;
+		break;
+	case TPS6507X_DCDC_2:
+		reg = TPS6507X_REG_DEFDCDC2_LOW;
+		break;
+	case TPS6507X_DCDC_3:
+		reg = TPS6507X_REG_DEFDCDC3_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	data = tps_6507x_reg_read(tps, reg);
+	if (data < 0)
+		return data;
+
+	data &= TPS6507X_DEFDCDCX_DCDC_MASK;
+	return tps->info[dcdc]->table[data] * 1000;
+}
+
+static int tps6507x_dcdc_set_voltage(struct regulator_dev *dev,
+				int min_uV, int max_uV)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, vsel, dcdc = rdev_get_id(dev);
+	u8 reg;
+
+	switch (dcdc) {
+	case TPS6507X_DCDC_1:
+		reg = TPS6507X_REG_DEFDCDC1;
+		break;
+	case TPS6507X_DCDC_2:
+		reg = TPS6507X_REG_DEFDCDC2_LOW;
+		break;
+	case TPS6507X_DCDC_3:
+		reg = TPS6507X_REG_DEFDCDC3_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (min_uV < tps->info[dcdc]->min_uV
+		|| min_uV > tps->info[dcdc]->max_uV)
+		return -EINVAL;
+	if (max_uV < tps->info[dcdc]->min_uV
+		|| max_uV > tps->info[dcdc]->max_uV)
+		return -EINVAL;
+
+	for (vsel = 0; vsel < tps->info[dcdc]->table_len; vsel++) {
+		int mV = tps->info[dcdc]->table[vsel];
+		int uV = mV * 1000;
+
+		/* Break at the first in-range value */
+		if (min_uV <= uV && uV <= max_uV)
+			break;
+	}
+
+	/* write to the register in case we found a match */
+	if (vsel == tps->info[dcdc]->table_len)
+		return -EINVAL;
+
+	data = tps_6507x_reg_read(tps, reg);
+	if (data < 0)
+		return data;
+
+	data &= ~TPS6507X_DEFDCDCX_DCDC_MASK;
+	data |= vsel;
+
+	return tps_6507x_reg_write(tps, reg, data);
+}
+
+static int tps6507x_ldo_get_voltage(struct regulator_dev *dev)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, ldo = rdev_get_id(dev);
+	u8 reg, mask;
+
+	if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+		return -EINVAL;
+	else {
+		reg = (ldo == TPS6507X_LDO_1 ?
+			TPS6507X_REG_LDO_CTRL1 : TPS6507X_REG_DEFLDO2);
+		mask = (ldo == TPS6507X_LDO_1 ?
+			TPS6507X_REG_LDO_CTRL1_LDO1_MASK :
+				TPS6507X_REG_DEFLDO2_LDO2_MASK);
+	}
+
+	data = tps_6507x_reg_read(tps, reg);
+	if (data < 0)
+		return data;
+
+	data &= mask;
+	return tps->info[ldo]->table[data] * 1000;
+}
+
+static int tps6507x_ldo_set_voltage(struct regulator_dev *dev,
+				int min_uV, int max_uV)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int data, vsel, ldo = rdev_get_id(dev);
+	u8 reg, mask;
+
+	if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+		return -EINVAL;
+	else {
+		reg = (ldo == TPS6507X_LDO_1 ?
+			TPS6507X_REG_LDO_CTRL1 : TPS6507X_REG_DEFLDO2);
+		mask = (ldo == TPS6507X_LDO_1 ?
+			TPS6507X_REG_LDO_CTRL1_LDO1_MASK :
+				TPS6507X_REG_DEFLDO2_LDO2_MASK);
+	}
+
+	if (min_uV < tps->info[ldo]->min_uV || min_uV > tps->info[ldo]->max_uV)
+		return -EINVAL;
+	if (max_uV < tps->info[ldo]->min_uV || max_uV > tps->info[ldo]->max_uV)
+		return -EINVAL;
+
+	for (vsel = 0; vsel < tps->info[ldo]->table_len; vsel++) {
+		int mV = tps->info[ldo]->table[vsel];
+		int uV = mV * 1000;
+
+		/* Break at the first in-range value */
+		if (min_uV <= uV && uV <= max_uV)
+			break;
+	}
+
+	if (vsel == tps->info[ldo]->table_len)
+		return -EINVAL;
+
+	data = tps_6507x_reg_read(tps, reg);
+	if (data < 0)
+		return data;
+
+	data &= ~mask;
+	data |= vsel;
+
+	return tps_6507x_reg_write(tps, reg, data);
+}
+
+static int tps6507x_dcdc_list_voltage(struct regulator_dev *dev,
+					unsigned selector)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int dcdc = rdev_get_id(dev);
+
+	if (dcdc < TPS6507X_DCDC_1 || dcdc > TPS6507X_DCDC_3)
+		return -EINVAL;
+
+	if (selector >= tps->info[dcdc]->table_len)
+		return -EINVAL;
+	else
+		return tps->info[dcdc]->table[selector] * 1000;
+}
+
+static int tps6507x_ldo_list_voltage(struct regulator_dev *dev,
+					unsigned selector)
+{
+	struct tps_pmic *tps = rdev_get_drvdata(dev);
+	int ldo = rdev_get_id(dev);
+
+	if (ldo < TPS6507X_LDO_1 || ldo > TPS6507X_LDO_2)
+		return -EINVAL;
+
+	if (selector >= tps->info[ldo]->table_len)
+		return -EINVAL;
+	else
+		return tps->info[ldo]->table[selector] * 1000;
+}
+
+/* Operations permitted on VDCDCx */
+static struct regulator_ops tps6507x_dcdc_ops = {
+	.is_enabled = tps6507x_dcdc_is_enabled,
+	.enable = tps6507x_dcdc_enable,
+	.disable = tps6507x_dcdc_disable,
+	.get_voltage = tps6507x_dcdc_get_voltage,
+	.set_voltage = tps6507x_dcdc_set_voltage,
+	.list_voltage = tps6507x_dcdc_list_voltage,
+};
+
+/* Operations permitted on LDOx */
+static struct regulator_ops tps6507x_ldo_ops = {
+	.is_enabled = tps6507x_ldo_is_enabled,
+	.enable = tps6507x_ldo_enable,
+	.disable = tps6507x_ldo_disable,
+	.get_voltage = tps6507x_ldo_get_voltage,
+	.set_voltage = tps6507x_ldo_set_voltage,
+	.list_voltage = tps6507x_ldo_list_voltage,
+};
+
+static
+int tps_6507x_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	static int desc_id;
+	const struct tps_info *info = (void *)id->driver_data;
+	struct regulator_init_data *init_data;
+	struct regulator_dev *rdev;
+	struct tps_pmic *tps;
+	int i;
+
+	if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	/**
+	 * init_data points to array of regulator_init structures
+	 * coming from the board-evm file.
+	 */
+	init_data = client->dev.platform_data;
+
+	if (!init_data)
+		return -EIO;
+
+	tps = kzalloc(sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	mutex_init(&tps->io_lock);
+
+	/* common for all regulators */
+	tps->client = client;
+
+	for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) {
+		/* Register the regulators */
+		tps->info[i] = info;
+		tps->desc[i].name = info->name;
+		tps->desc[i].id = desc_id++;
+		tps->desc[i].n_voltages = num_voltages[i];
+		tps->desc[i].ops = (i > TPS6507X_DCDC_3 ?
+				&tps6507x_ldo_ops : &tps6507x_dcdc_ops);
+		tps->desc[i].type = REGULATOR_VOLTAGE;
+		tps->desc[i].owner = THIS_MODULE;
+
+		rdev = regulator_register(&tps->desc[i],
+					&client->dev, init_data, tps);
+		if (IS_ERR(rdev)) {
+			dev_err(&client->dev, "failed to register %s\n",
+				id->name);
+
+			/* Unregister */
+			while (i)
+				regulator_unregister(tps->rdev[--i]);
+
+			tps->client = NULL;
+
+			/* clear the client data in i2c */
+			i2c_set_clientdata(client, NULL);
+
+			kfree(tps);
+			return PTR_ERR(rdev);
+		}
+
+		/* Save regulator for cleanup */
+		tps->rdev[i] = rdev;
+	}
+
+	i2c_set_clientdata(client, tps);
+
+	return 0;
+}
+
+/**
+ * tps_6507x_remove - TPS6507x driver i2c remove handler
+ * @client: i2c driver client device structure
+ *
+ * Unregister TPS driver as an i2c client device driver
+ */
+static int __devexit tps_6507x_remove(struct i2c_client *client)
+{
+	struct tps_pmic *tps = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < TPS6507X_NUM_REGULATOR; i++)
+		regulator_unregister(tps->rdev[i]);
+
+	tps->client = NULL;
+
+	/* clear the client data in i2c */
+	i2c_set_clientdata(client, NULL);
+	kfree(tps);
+
+	return 0;
+}
+
+static const struct tps_info tps6507x_regs[] = {
+	{
+		.name = "VDCDC1",
+		.min_uV = 725000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
+		.table = VDCDCx_VSEL_table,
+	},
+	{
+		.name = "VDCDC2",
+		.min_uV = 725000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
+		.table = VDCDCx_VSEL_table,
+	},
+	{
+		.name = "VDCDC3",
+		.min_uV = 725000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(VDCDCx_VSEL_table),
+		.table = VDCDCx_VSEL_table,
+	},
+	{
+		.name = "LDO1",
+		.min_uV = 1000000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(LDO1_VSEL_table),
+		.table = LDO1_VSEL_table,
+	},
+	{
+		.name = "LDO2",
+		.min_uV = 725000,
+		.max_uV = 3300000,
+		.table_len = ARRAY_SIZE(LDO2_VSEL_table),
+		.table = LDO2_VSEL_table,
+	},
+};
+
+static const struct i2c_device_id tps_6507x_id[] = {
+	{.name = "tps6507x",
+	.driver_data = (unsigned long) tps6507x_regs,},
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, tps_6507x_id);
+
+static struct i2c_driver tps_6507x_i2c_driver = {
+	.driver = {
+		.name = "tps6507x",
+		.owner = THIS_MODULE,
+	},
+	.probe = tps_6507x_probe,
+	.remove = __devexit_p(tps_6507x_remove),
+	.id_table = tps_6507x_id,
+};
+
+/**
+ * tps_6507x_init
+ *
+ * Module init function
+ */
+static int __init tps_6507x_init(void)
+{
+	return i2c_add_driver(&tps_6507x_i2c_driver);
+}
+subsys_initcall(tps_6507x_init);
+
+/**
+ * tps_6507x_cleanup
+ *
+ * Module exit function
+ */
+static void __exit tps_6507x_cleanup(void)
+{
+	i2c_del_driver(&tps_6507x_i2c_driver);
+}
+module_exit(tps_6507x_cleanup);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TPS6507x voltage regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
index 06d2fa96a8b..44917da4ac9 100644
--- a/drivers/regulator/userspace-consumer.c
+++ b/drivers/regulator/userspace-consumer.c
@@ -93,16 +93,21 @@ static ssize_t reg_set_state(struct device *dev, struct device_attribute *attr,
 static DEVICE_ATTR(name, 0444, reg_show_name, NULL);
 static DEVICE_ATTR(state, 0644, reg_show_state, reg_set_state);
 
-static struct device_attribute *attributes[] = {
-	&dev_attr_name,
-	&dev_attr_state,
+static struct attribute *attributes[] = {
+	&dev_attr_name.attr,
+	&dev_attr_state.attr,
+	NULL,
+};
+
+static const struct attribute_group attr_group = {
+	.attrs	= attributes,
 };
 
 static int regulator_userspace_consumer_probe(struct platform_device *pdev)
 {
 	struct regulator_userspace_consumer_data *pdata;
 	struct userspace_consumer_data *drvdata;
-	int ret, i;
+	int ret;
 
 	pdata = pdev->dev.platform_data;
 	if (!pdata)
@@ -125,31 +130,29 @@ static int regulator_userspace_consumer_probe(struct platform_device *pdev)
 		goto err_alloc_supplies;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(attributes); i++) {
-		ret = device_create_file(&pdev->dev, attributes[i]);
-		if (ret != 0)
-			goto err_create_attrs;
-	}
+	ret = sysfs_create_group(&pdev->dev.kobj, &attr_group);
+	if (ret != 0)
+		goto err_create_attrs;
 
-	if (pdata->init_on)
+	if (pdata->init_on) {
 		ret = regulator_bulk_enable(drvdata->num_supplies,
 					    drvdata->supplies);
-
-	drvdata->enabled = pdata->init_on;
-
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to set initial state: %d\n", ret);
-		goto err_create_attrs;
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to set initial state: %d\n", ret);
+			goto err_enable;
+		}
 	}
 
+	drvdata->enabled = pdata->init_on;
 	platform_set_drvdata(pdev, drvdata);
 
 	return 0;
 
-err_create_attrs:
-	for (i = 0; i < ARRAY_SIZE(attributes); i++)
-		device_remove_file(&pdev->dev, attributes[i]);
+err_enable:
+	sysfs_remove_group(&pdev->dev.kobj, &attr_group);
 
+err_create_attrs:
 	regulator_bulk_free(drvdata->num_supplies, drvdata->supplies);
 
 err_alloc_supplies:
@@ -160,10 +163,8 @@ err_alloc_supplies:
 static int regulator_userspace_consumer_remove(struct platform_device *pdev)
 {
 	struct userspace_consumer_data *data = platform_get_drvdata(pdev);
-	int i;
 
-	for (i = 0; i < ARRAY_SIZE(attributes); i++)
-		device_remove_file(&pdev->dev, attributes[i]);
+	sysfs_remove_group(&pdev->dev.kobj, &attr_group);
 
 	if (data->enabled)
 		regulator_bulk_disable(data->num_supplies, data->supplies);
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index e7db5664722..addc032c84b 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -27,71 +27,81 @@ struct virtual_consumer_data {
 	unsigned int mode;
 };
 
-static void update_voltage_constraints(struct virtual_consumer_data *data)
+static void update_voltage_constraints(struct device *dev,
+				       struct virtual_consumer_data *data)
 {
 	int ret;
 
 	if (data->min_uV && data->max_uV
 	    && data->min_uV <= data->max_uV) {
+		dev_dbg(dev, "Requesting %d-%duV\n",
+			data->min_uV, data->max_uV);
 		ret = regulator_set_voltage(data->regulator,
-					    data->min_uV, data->max_uV);
+					data->min_uV, data->max_uV);
 		if (ret != 0) {
-			printk(KERN_ERR "regulator_set_voltage() failed: %d\n",
-			       ret);
+			dev_err(dev,
+				"regulator_set_voltage() failed: %d\n", ret);
 			return;
 		}
 	}
 
 	if (data->min_uV && data->max_uV && !data->enabled) {
+		dev_dbg(dev, "Enabling regulator\n");
 		ret = regulator_enable(data->regulator);
 		if (ret == 0)
 			data->enabled = 1;
 		else
-			printk(KERN_ERR "regulator_enable() failed: %d\n",
+			dev_err(dev, "regulator_enable() failed: %d\n",
 				ret);
 	}
 
 	if (!(data->min_uV && data->max_uV) && data->enabled) {
+		dev_dbg(dev, "Disabling regulator\n");
 		ret = regulator_disable(data->regulator);
 		if (ret == 0)
 			data->enabled = 0;
 		else
-			printk(KERN_ERR "regulator_disable() failed: %d\n",
+			dev_err(dev, "regulator_disable() failed: %d\n",
 				ret);
 	}
 }
 
-static void update_current_limit_constraints(struct virtual_consumer_data
-						*data)
+static void update_current_limit_constraints(struct device *dev,
+					  struct virtual_consumer_data *data)
 {
 	int ret;
 
 	if (data->max_uA
 	    && data->min_uA <= data->max_uA) {
+		dev_dbg(dev, "Requesting %d-%duA\n",
+			data->min_uA, data->max_uA);
 		ret = regulator_set_current_limit(data->regulator,
 					data->min_uA, data->max_uA);
 		if (ret != 0) {
-			pr_err("regulator_set_current_limit() failed: %d\n",
-			       ret);
+			dev_err(dev,
+				"regulator_set_current_limit() failed: %d\n",
+				ret);
 			return;
 		}
 	}
 
 	if (data->max_uA && !data->enabled) {
+		dev_dbg(dev, "Enabling regulator\n");
 		ret = regulator_enable(data->regulator);
 		if (ret == 0)
 			data->enabled = 1;
 		else
-			printk(KERN_ERR "regulator_enable() failed: %d\n",
+			dev_err(dev, "regulator_enable() failed: %d\n",
 				ret);
 	}
 
 	if (!(data->min_uA && data->max_uA) && data->enabled) {
+		dev_dbg(dev, "Disabling regulator\n");
 		ret = regulator_disable(data->regulator);
 		if (ret == 0)
 			data->enabled = 0;
 		else
-			printk(KERN_ERR "regulator_disable() failed: %d\n",
+			dev_err(dev, "regulator_disable() failed: %d\n",
 				ret);
 	}
 }
@@ -115,7 +125,7 @@ static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
 	mutex_lock(&data->lock);
 
 	data->min_uV = val;
-	update_voltage_constraints(data);
+	update_voltage_constraints(dev, data);
 
 	mutex_unlock(&data->lock);
 
@@ -141,7 +151,7 @@ static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
 	mutex_lock(&data->lock);
 
 	data->max_uV = val;
-	update_voltage_constraints(data);
+	update_voltage_constraints(dev, data);
 
 	mutex_unlock(&data->lock);
 
@@ -167,7 +177,7 @@ static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
 	mutex_lock(&data->lock);
 
 	data->min_uA = val;
-	update_current_limit_constraints(data);
+	update_current_limit_constraints(dev, data);
 
 	mutex_unlock(&data->lock);
 
@@ -193,7 +203,7 @@ static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
 	mutex_lock(&data->lock);
 
 	data->max_uA = val;
-	update_current_limit_constraints(data);
+	update_current_limit_constraints(dev, data);
 
 	mutex_unlock(&data->lock);
 
@@ -276,8 +286,7 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev)
 
 	drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL);
 	if (drvdata == NULL) {
-		ret = -ENOMEM;
-		goto err;
+		return -ENOMEM;
 	}
 
 	mutex_init(&drvdata->lock);
@@ -285,13 +294,18 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev)
 	drvdata->regulator = regulator_get(&pdev->dev, reg_id);
 	if (IS_ERR(drvdata->regulator)) {
 		ret = PTR_ERR(drvdata->regulator);
+		dev_err(&pdev->dev, "Failed to obtain supply '%s': %d\n",
+			reg_id, ret);
 		goto err;
 	}
 
 	for (i = 0; i < ARRAY_SIZE(attributes); i++) {
 		ret = device_create_file(&pdev->dev, attributes[i]);
-		if (ret != 0)
-			goto err;
+		if (ret != 0) {
+			dev_err(&pdev->dev, "Failed to create attr %d: %d\n",
+				i, ret);
+			goto err_regulator;
+		}
 	}
 
 	drvdata->mode = regulator_get_mode(drvdata->regulator);
@@ -300,6 +314,8 @@ static int regulator_virtual_consumer_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_regulator:
+	regulator_put(drvdata->regulator);
 err:
 	for (i = 0; i < ARRAY_SIZE(attributes); i++)
 		device_remove_file(&pdev->dev, attributes[i]);
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 17a00b0fafd..768bd0e5b48 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1419,6 +1419,8 @@ int wm8350_register_regulator(struct wm8350 *wm8350, int reg,
 {
 	struct platform_device *pdev;
 	int ret;
+	if (reg < 0 || reg >= NUM_WM8350_REGULATORS)
+		return -EINVAL;
 
 	if (wm8350->pmic.pdev[reg])
 		return -EBUSY;
diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h
index 115dbe96508..c63b65c9442 100644
--- a/include/linux/mfd/da903x.h
+++ b/include/linux/mfd/da903x.h
@@ -1,7 +1,7 @@
 #ifndef __LINUX_PMIC_DA903X_H
 #define __LINUX_PMIC_DA903X_H
 
-/* Unified sub device IDs for DA9030/DA9034 */
+/* Unified sub device IDs for DA9030/DA9034/DA9035 */
 enum {
 	DA9030_ID_LED_1,
 	DA9030_ID_LED_2,
@@ -57,6 +57,8 @@ enum {
 	DA9034_ID_LDO13,
 	DA9034_ID_LDO14,
 	DA9034_ID_LDO15,
+
+	DA9035_ID_BUCK3,
 };
 
 /*
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 277f4b964df..490c5b37b6d 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -125,6 +125,8 @@ struct regulator_bulk_data {
 /* regulator get and put */
 struct regulator *__must_check regulator_get(struct device *dev,
 					     const char *id);
+struct regulator *__must_check regulator_get_exclusive(struct device *dev,
+						       const char *id);
 void regulator_put(struct regulator *regulator);
 
 /* regulator output control and status */
@@ -144,6 +146,8 @@ void regulator_bulk_free(int num_consumers,
 
 int regulator_count_voltages(struct regulator *regulator);
 int regulator_list_voltage(struct regulator *regulator, unsigned selector);
+int regulator_is_supported_voltage(struct regulator *regulator,
+				   int min_uV, int max_uV);
 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
 int regulator_get_voltage(struct regulator *regulator);
 int regulator_set_current_limit(struct regulator *regulator,
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index ce1be708ca1..31f2055eae2 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -37,7 +37,8 @@ enum regulator_status {
  *
  * @enable: Configure the regulator as enabled.
  * @disable: Configure the regulator as disabled.
- * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 if not.
+ *		May also return negative errno.
  *
  * @set_voltage: Set the voltage for the regulator within the range specified.
  *               The driver should select the voltage closest to min_uV.
@@ -162,6 +163,8 @@ struct regulator_desc {
 struct regulator_dev {
 	struct regulator_desc *desc;
 	int use_count;
+	int open_count;
+	int exclusive;
 
 	/* lists we belong to */
 	struct list_head list; /* list of all regulators */
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 91b4da31f1b..e94a4a1c7c8 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -5,6 +5,9 @@
  *
  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
  *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of the
@@ -16,9 +19,30 @@
 
 struct regulator_init_data;
 
+/**
+ * struct fixed_voltage_config - fixed_voltage_config structure
+ * @supply_name:	Name of the regulator supply
+ * @microvolts:		Output voltage of regulator
+ * @gpio:		GPIO to use for enable control
+ * 			set to -EINVAL if not used
+ * @enable_high:	Polarity of enable GPIO
+ *			1 = Active high, 0 = Active low
+ * @enabled_at_boot:	Whether regulator has been enabled at
+ * 			boot or not. 1 = Yes, 0 = No
+ * 			This is used to keep the regulator at
+ * 			the default state
+ * @init_data:		regulator_init_data
+ *
+ * This structure contains fixed voltage regulator configuration
+ * information that must be passed by platform code to the fixed
+ * voltage regulator driver.
+ */
 struct fixed_voltage_config {
 	const char *supply_name;
 	int microvolts;
+	int gpio;
+	unsigned enable_high:1;
+	unsigned enabled_at_boot:1;
 	struct regulator_init_data *init_data;
 };
 
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index bac64fa390f..87f5f176d4e 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -41,7 +41,7 @@ struct regulator;
 #define REGULATOR_CHANGE_DRMS		0x10
 
 /**
- * struct regulator_state - regulator state during low power syatem states
+ * struct regulator_state - regulator state during low power system states
  *
  * This describes a regulators state during a system wide low power state.
  *
@@ -117,25 +117,37 @@ struct regulation_constraints {
 	/* mode to set on startup */
 	unsigned int initial_mode;
 
-	/* constriant flags */
+	/* constraint flags */
 	unsigned always_on:1;	/* regulator never off when system is on */
 	unsigned boot_on:1;	/* bootloader/firmware enabled regulator */
-	unsigned apply_uV:1;	/* apply uV constraint iff min == max */
+	unsigned apply_uV:1;	/* apply uV constraint if min == max */
 };
 
 /**
  * struct regulator_consumer_supply - supply -> device mapping
  *
- * This maps a supply name to a device.
+ * This maps a supply name to a device.  Only one of dev or dev_name
+ * can be specified.  Use of dev_name allows support for buses which
+ * make struct device available late such as I2C and is the preferred
+ * form.
  *
  * @dev: Device structure for the consumer.
+ * @dev_name: Result of dev_name() for the consumer.
  * @supply: Name for the supply.
  */
 struct regulator_consumer_supply {
 	struct device *dev;	/* consumer */
+	const char *dev_name;   /* dev_name() for consumer */
 	const char *supply;	/* consumer supply - e.g. "vcc" */
 };
 
+/* Initialize struct regulator_consumer_supply */
+#define REGULATOR_SUPPLY(_name, _dev_name)			\
+{								\
+	.supply		= _name,				\
+	.dev_name	= _dev_name,				\
+}
+
 /**
  * struct regulator_init_data - regulator platform initialisation data.
  *
@@ -166,6 +178,12 @@ struct regulator_init_data {
 
 int regulator_suspend_prepare(suspend_state_t state);
 
+#ifdef CONFIG_REGULATOR
 void regulator_has_full_constraints(void);
+#else
+static inline void regulator_has_full_constraints(void)
+{
+}
+#endif
 
 #endif
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
index 44563192bf1..de9a7fae20b 100644
--- a/include/linux/regulator/max1586.h
+++ b/include/linux/regulator/max1586.h
@@ -36,7 +36,7 @@
  * max1586_subdev_data - regulator data
  * @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
  * @name: regulator cute name (example for V3: "vcc_core")
- * @platform_data: regulator init data (contraints, supplies, ...)
+ * @platform_data: regulator init data (constraints, supplies, ...)
  */
 struct max1586_subdev_data {
 	int				id;
@@ -46,7 +46,7 @@ struct max1586_subdev_data {
 
 /**
  * max1586_platform_data - platform data for max1586
- * @num_subdevs: number of regultors used (may be 1 or 2)
+ * @num_subdevs: number of regulators used (may be 1 or 2)
  * @subdevs: regulator used
  *           At most, there will be a regulator for V3 and one for V6 voltages.
  * @v3_gain: gain on the V3 voltage output multiplied by 1e6.