summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJoe Perches <joe@perches.com>2010-02-09 11:49:50 +0000
committerDavid S. Miller <davem@davemloft.net>2010-02-12 13:27:45 -0800
commitbf82c189a92f06967cf790d3ab0fc9827a9d00ff (patch)
treed481962037158879f2d9af33cd595a5b406a8128
parentb3d95c5c93d4b57eaea0ad3f582b08a6b5fb3eb1 (diff)
drivers/net/r8196.c: Use netif_printk macros
Simplify the logic a bit, make the message logs a bit more consistent. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/r8169.c136
1 files changed, 48 insertions, 88 deletions
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 85c635f354b..616ae5aa66a 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -744,12 +744,10 @@ static void rtl8169_check_link_status(struct net_device *dev,
spin_lock_irqsave(&tp->lock, flags);
if (tp->link_ok(ioaddr)) {
netif_carrier_on(dev);
- if (netif_msg_ifup(tp))
- printk(KERN_INFO PFX "%s: link up\n", dev->name);
+ netif_info(tp, ifup, dev, "link up\n");
} else {
- if (netif_msg_ifdown(tp))
- printk(KERN_INFO PFX "%s: link down\n", dev->name);
netif_carrier_off(dev);
+ netif_info(tp, ifdown, dev, "link down\n");
}
spin_unlock_irqrestore(&tp->lock, flags);
}
@@ -862,11 +860,8 @@ static int rtl8169_set_speed_tbi(struct net_device *dev,
} else if (autoneg == AUTONEG_ENABLE)
RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart);
else {
- if (netif_msg_link(tp)) {
- printk(KERN_WARNING "%s: "
- "incorrect speed setting refused in TBI mode\n",
- dev->name);
- }
+ netif_warn(tp, link, dev,
+ "incorrect speed setting refused in TBI mode\n");
ret = -EOPNOTSUPP;
}
@@ -901,9 +896,9 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
(tp->mac_version != RTL_GIGA_MAC_VER_15) &&
(tp->mac_version != RTL_GIGA_MAC_VER_16)) {
giga_ctrl |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
- } else if (netif_msg_link(tp)) {
- printk(KERN_INFO "%s: PHY does not support 1000Mbps.\n",
- dev->name);
+ } else {
+ netif_info(tp, link, dev,
+ "PHY does not support 1000Mbps\n");
}
bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
@@ -2705,8 +2700,7 @@ static void rtl8169_phy_timer(unsigned long __opaque)
if (tp->link_ok(ioaddr))
goto out_unlock;
- if (netif_msg_link(tp))
- printk(KERN_WARNING "%s: PHY reset until link up\n", dev->name);
+ netif_warn(tp, link, dev, "PHY reset until link up\n");
tp->phy_reset_enable(ioaddr);
@@ -2776,8 +2770,7 @@ static void rtl8169_phy_reset(struct net_device *dev,
return;
msleep(1);
}
- if (netif_msg_link(tp))
- printk(KERN_ERR "%s: PHY reset failed.\n", dev->name);
+ netif_err(tp, link, dev, "PHY reset failed\n");
}
static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
@@ -2811,8 +2804,8 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
*/
rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL);
- if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp))
- printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name);
+ if (RTL_R8(PHYstatus) & TBI_Enable)
+ netif_info(tp, link, dev, "TBI auto-negotiating\n");
}
static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
@@ -3012,8 +3005,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* enable device (incl. PCI PM wakeup and hotplug setup) */
rc = pci_enable_device(pdev);
if (rc < 0) {
- if (netif_msg_probe(tp))
- dev_err(&pdev->dev, "enable failure\n");
+ netif_err(tp, probe, dev, "enable failure\n");
goto err_out_free_dev_1;
}
@@ -3023,29 +3015,24 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* make sure PCI base addr 1 is MMIO */
if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
- if (netif_msg_probe(tp)) {
- dev_err(&pdev->dev,
- "region #%d not an MMIO resource, aborting\n",
- region);
- }
+ netif_err(tp, probe, dev,
+ "region #%d not an MMIO resource, aborting\n",
+ region);
rc = -ENODEV;
goto err_out_mwi_3;
}
/* check for weird/broken PCI region reporting */
if (pci_resource_len(pdev, region) < R8169_REGS_SIZE) {
- if (netif_msg_probe(tp)) {
- dev_err(&pdev->dev,
- "Invalid PCI region size(s), aborting\n");
- }
+ netif_err(tp, probe, dev,
+ "Invalid PCI region size(s), aborting\n");
rc = -ENODEV;
goto err_out_mwi_3;
}
rc = pci_request_regions(pdev, MODULENAME);
if (rc < 0) {
- if (netif_msg_probe(tp))
- dev_err(&pdev->dev, "could not request regions.\n");
+ netif_err(tp, probe, dev, "could not request regions\n");
goto err_out_mwi_3;
}
@@ -3058,10 +3045,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc < 0) {
- if (netif_msg_probe(tp)) {
- dev_err(&pdev->dev,
- "DMA configuration failed.\n");
- }
+ netif_err(tp, probe, dev, "DMA configuration failed\n");
goto err_out_free_res_4;
}
}
@@ -3069,15 +3053,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* ioremap MMIO region */
ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
if (!ioaddr) {
- if (netif_msg_probe(tp))
- dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
+ netif_err(tp, probe, dev, "cannot remap MMIO, aborting\n");
rc = -EIO;
goto err_out_free_res_4;
}
tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
- if (!tp->pcie_cap && netif_msg_probe(tp))
- dev_info(&pdev->dev, "no PCI Express capability\n");
+ if (!tp->pcie_cap)
+ netif_info(tp, probe, dev, "no PCI Express capability\n");
RTL_W16(IntrMask, 0x0000);
@@ -3100,10 +3083,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Use appropriate default if unknown */
if (tp->mac_version == RTL_GIGA_MAC_NONE) {
- if (netif_msg_probe(tp)) {
- dev_notice(&pdev->dev,
- "unknown MAC, using family default\n");
- }
+ netif_notice(tp, probe, dev,
+ "unknown MAC, using family default\n");
tp->mac_version = cfg->default_ver;
}
@@ -3185,14 +3166,10 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_drvdata(pdev, dev);
- if (netif_msg_probe(tp)) {
- u32 xid = RTL_R32(TxConfig) & 0x9cf0f8ff;
-
- printk(KERN_INFO "%s: %s at 0x%lx, %pM, XID %08x IRQ %d\n",
- dev->name,
- rtl_chip_info[tp->chipset].name,
- dev->base_addr, dev->dev_addr, xid, dev->irq);
- }
+ netif_info(tp, probe, dev, "%s at 0x%lx, %pM, XID %08x IRQ %d\n",
+ rtl_chip_info[tp->chipset].name,
+ dev->base_addr, dev->dev_addr,
+ (u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), dev->irq);
rtl8169_init_phy(dev, tp);
@@ -4131,10 +4108,10 @@ static void rtl8169_reinit_task(struct work_struct *work)
ret = rtl8169_open(dev);
if (unlikely(ret < 0)) {
- if (net_ratelimit() && netif_msg_drv(tp)) {
- printk(KERN_ERR PFX "%s: reinit failure (status = %d)."
- " Rescheduling.\n", dev->name, ret);
- }
+ if (net_ratelimit())
+ netif_err(tp, drv, dev,
+ "reinit failure (status = %d). Rescheduling\n",
+ ret);
rtl8169_schedule_work(dev, rtl8169_reinit_task);
}
@@ -4164,10 +4141,8 @@ static void rtl8169_reset_task(struct work_struct *work)
netif_wake_queue(dev);
rtl8169_check_link_status(dev, tp, tp->mmio_addr);
} else {
- if (net_ratelimit() && netif_msg_intr(tp)) {
- printk(KERN_EMERG PFX "%s: Rx buffers shortage\n",
- dev->name);
- }
+ if (net_ratelimit())
+ netif_emerg(tp, intr, dev, "Rx buffers shortage\n");
rtl8169_schedule_work(dev, rtl8169_reset_task);
}
@@ -4255,11 +4230,7 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
u32 opts1;
if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
- if (netif_msg_drv(tp)) {
- printk(KERN_ERR
- "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
- }
+ netif_err(tp, drv, dev, "BUG! Tx Ring full when queue awake!\n");
goto err_stop;
}
@@ -4321,11 +4292,8 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
pci_read_config_word(pdev, PCI_STATUS, &pci_status);
- if (netif_msg_intr(tp)) {
- printk(KERN_ERR
- "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n",
- dev->name, pci_cmd, pci_status);
- }
+ netif_err(tp, intr, dev, "PCI error (cmd = 0x%04x, status = 0x%04x)\n",
+ pci_cmd, pci_status);
/*
* The recovery sequence below admits a very elaborated explanation:
@@ -4349,8 +4317,7 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
/* The infamous DAC f*ckup only happens at boot time */
if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) {
- if (netif_msg_intr(tp))
- printk(KERN_INFO "%s: disabling PCI DAC.\n", dev->name);
+ netif_info(tp, intr, dev, "disabling PCI DAC\n");
tp->cp_cmd &= ~PCIDAC;
RTL_W16(CPlusCmd, tp->cp_cmd);
dev->features &= ~NETIF_F_HIGHDMA;
@@ -4477,11 +4444,8 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
if (status & DescOwn)
break;
if (unlikely(status & RxRES)) {
- if (netif_msg_rx_err(tp)) {
- printk(KERN_INFO
- "%s: Rx ERROR. status = %08x\n",
- dev->name, status);
- }
+ netif_info(tp, rx_err, dev, "Rx ERROR. status = %08x\n",
+ status);
dev->stats.rx_errors++;
if (status & (RxRWT | RxRUNT))
dev->stats.rx_length_errors++;
@@ -4544,8 +4508,8 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
tp->cur_rx = cur_rx;
delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
- if (!delta && count && netif_msg_intr(tp))
- printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name);
+ if (!delta && count)
+ netif_info(tp, intr, dev, "no Rx buffer allocated\n");
tp->dirty_rx += delta;
/*
@@ -4555,8 +4519,8 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
* after refill ?
* - how do others driver handle this condition (Uh oh...).
*/
- if ((tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) && netif_msg_intr(tp))
- printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name);
+ if (tp->dirty_rx + NUM_RX_DESC == tp->cur_rx)
+ netif_emerg(tp, intr, dev, "Rx buffers exhausted\n");
return count;
}
@@ -4611,10 +4575,9 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
if (likely(napi_schedule_prep(&tp->napi)))
__napi_schedule(&tp->napi);
- else if (netif_msg_intr(tp)) {
- printk(KERN_INFO "%s: interrupt %04x in poll\n",
- dev->name, status);
- }
+ else
+ netif_info(tp, intr, dev,
+ "interrupt %04x in poll\n", status);
}
/* We only get a new MSI interrupt when all active irq
@@ -4750,10 +4713,7 @@ static void rtl_set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_PROMISC) {
/* Unconditionally log net taps. */
- if (netif_msg_link(tp)) {
- printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
- dev->name);
- }
+ netif_notice(tp, link, dev, "Promiscuous mode enabled\n");
rx_mode =
AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
AcceptAllPhys;