Merge /spare/repo/linux-2.6/

26 files changed, 252 insertions, 220 deletions

diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt
index d59b95cc6f1..a49e5f2c2b4 100644
--- a/Documentation/usb/URB.txt
+++ b/Documentation/usb/URB.txt
@@ -1,5 +1,6 @@
 Revised: 2000-Dec-05.
 Again:   2002-Jul-06
+Again:   2005-Sep-19
 
     NOTE:
 
@@ -18,8 +19,8 @@ called USB Request Block, or URB for short.
   and deliver the data and status back. 
 
 - Execution of an URB is inherently an asynchronous operation, i.e. the 
-  usb_submit_urb(urb) call returns immediately after it has successfully queued 
-  the requested action. 
+  usb_submit_urb(urb) call returns immediately after it has successfully
+  queued the requested action.
 
 - Transfers for one URB can be canceled with usb_unlink_urb(urb) at any time. 
 
@@ -94,8 +95,9 @@ To free an URB, use
 
 	void usb_free_urb(struct urb *urb)
 
-You may not free an urb that you've submitted, but which hasn't yet been
-returned to you in a completion callback.
+You may free an urb that you've submitted, but which hasn't yet been
+returned to you in a completion callback.  It will automatically be
+deallocated when it is no longer in use.
 
 
 1.4. What has to be filled in?
@@ -145,30 +147,36 @@ to get seamless ISO streaming.
 
 1.6. How to cancel an already running URB?
 
-For an URB which you've submitted, but which hasn't been returned to
-your driver by the host controller, call
+There are two ways to cancel an URB you've submitted but which hasn't
+been returned to your driver yet.  For an asynchronous cancel, call
 
 	int usb_unlink_urb(struct urb *urb)
 
 It removes the urb from the internal list and frees all allocated
-HW descriptors. The status is changed to reflect unlinking. After 
-usb_unlink_urb() returns with that status code, you can free the URB
-with usb_free_urb().
+HW descriptors. The status is changed to reflect unlinking.  Note
+that the URB will not normally have finished when usb_unlink_urb()
+returns; you must still wait for the completion handler to be called.
 
-There is also an asynchronous unlink mode.  To use this, set the
-the URB_ASYNC_UNLINK flag in urb->transfer flags before calling
-usb_unlink_urb().  When using async unlinking, the URB will not
-normally be unlinked when usb_unlink_urb() returns.  Instead, wait
-for the completion handler to be called.
+To cancel an URB synchronously, call
+
+	void usb_kill_urb(struct urb *urb)
+
+It does everything usb_unlink_urb does, and in addition it waits
+until after the URB has been returned and the completion handler
+has finished.  It also marks the URB as temporarily unusable, so
+that if the completion handler or anyone else tries to resubmit it
+they will get a -EPERM error.  Thus you can be sure that when
+usb_kill_urb() returns, the URB is totally idle.
 
 
 1.7. What about the completion handler?
 
 The handler is of the following type:
 
-	typedef void (*usb_complete_t)(struct urb *);
+	typedef void (*usb_complete_t)(struct urb *, struct pt_regs *)
 
-i.e. it gets just the URB that caused the completion call.
+I.e., it gets the URB that caused the completion call, plus the
+register values at the time of the corresponding interrupt (if any).
 In the completion handler, you should have a look at urb->status to
 detect any USB errors. Since the context parameter is included in the URB,
 you can pass information to the completion handler. 
@@ -176,17 +184,11 @@ you can pass information to the completion handler.
 Note that even when an error (or unlink) is reported, data may have been
 transferred.  That's because USB transfers are packetized; it might take
 sixteen packets to transfer your 1KByte buffer, and ten of them might
-have transferred succesfully before the completion is called.
+have transferred succesfully before the completion was called.
 
 
 NOTE:  ***** WARNING *****
-Don't use urb->dev field in your completion handler; it's cleared
-as part of giving urbs back to drivers.  (Addressing an issue with
-ownership of periodic URBs, which was otherwise ambiguous.) Instead,
-use urb->context to hold all the data your driver needs.
-
-NOTE:  ***** WARNING *****
-Also, NEVER SLEEP IN A COMPLETION HANDLER.  These are normally called
+NEVER SLEEP IN A COMPLETION HANDLER.  These are normally called
 during hardware interrupt processing.  If you can, defer substantial
 work to a tasklet (bottom half) to keep system latencies low.  You'll
 probably need to use spinlocks to protect data structures you manipulate
@@ -229,24 +231,10 @@ ISO data with some other event stream.
 Interrupt transfers, like isochronous transfers, are periodic, and happen
 in intervals that are powers of two (1, 2, 4 etc) units.  Units are frames
 for full and low speed devices, and microframes for high speed ones.
-
-Currently, after you submit one interrupt URB, that urb is owned by the
-host controller driver until you cancel it with usb_unlink_urb().  You
-may unlink interrupt urbs in their completion handlers, if you need to.
-
-After a transfer completion is called, the URB is automagically resubmitted.
-THIS BEHAVIOR IS EXPECTED TO BE REMOVED!!
-
-Interrupt transfers may only send (or receive) the "maxpacket" value for
-the given interrupt endpoint; if you need more data, you will need to
-copy that data out of (or into) another buffer.  Similarly, you can't
-queue interrupt transfers.
-THESE RESTRICTIONS ARE EXPECTED TO BE REMOVED!!
-
-Note that this automagic resubmission model does make it awkward to use
-interrupt OUT transfers.  The portable solution involves unlinking those
-OUT urbs after the data is transferred, and perhaps submitting a final
-URB for a short packet.
-
 The usb_submit_urb() call modifies urb->interval to the implemented interval
 value that is less than or equal to the requested interval value.
+
+In Linux 2.6, unlike earlier versions, interrupt URBs are not automagically
+restarted when they complete.  They end when the completion handler is
+called, just like other URBs.  If you want an interrupt URB to be restarted,
+your completion handler must resubmit it.
diff --git a/MAINTAINERS b/MAINTAINERS
index ade7415d246..78aca12101a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1063,8 +1063,6 @@ M:	wli@holomorphy.com
 S:	Maintained
 
 I2C SUBSYSTEM
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
 P:	Jean Delvare
 M:	khali@linux-fr.org
 L:	lm-sensors@lm-sensors.org
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index b7242f1bd93..832b8bf99ae 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -184,8 +184,8 @@ mpc85xx_setup_pci1(struct pci_controller *hose)
 	pci->powar1 = 0x80044000 |
 	   (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
 
-	/* Setup outboud IO windows @ MPC85XX_PCI1_IO_BASE */
-	pci->potar2 = 0x00000000;
+	/* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
+	pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
 	pci->potear2 = 0x00000000;
 	pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
 	/* Enable, IO R/W */
@@ -235,8 +235,8 @@ mpc85xx_setup_pci2(struct pci_controller *hose)
 	pci->powar1 = 0x80044000 |
 	   (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
 
-	/* Setup outboud IO windows @ MPC85XX_PCI2_IO_BASE */
-	pci->potar2 = 0x00000000;
+	/* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
+	pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;;
 	pci->potear2 = 0x00000000;
 	pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
 	/* Enable, IO R/W */
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 3b112e3542f..ce23dc8c18c 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -669,6 +669,7 @@ void class_device_destroy(struct class *cls, dev_t devt)
 int class_device_rename(struct class_device *class_dev, char *new_name)
 {
 	int error = 0;
+	char *old_class_name = NULL, *new_class_name = NULL;
 
 	class_dev = class_device_get(class_dev);
 	if (!class_dev)
@@ -677,12 +678,24 @@ int class_device_rename(struct class_device *class_dev, char *new_name)
 	pr_debug("CLASS: renaming '%s' to '%s'\n", class_dev->class_id,
 		 new_name);
 
+	if (class_dev->dev)
+		old_class_name = make_class_name(class_dev);
+
 	strlcpy(class_dev->class_id, new_name, KOBJ_NAME_LEN);
 
 	error = kobject_rename(&class_dev->kobj, new_name);
 
+	if (class_dev->dev) {
+		new_class_name = make_class_name(class_dev);
+		sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj,
+				  new_class_name);
+		sysfs_remove_link(&class_dev->dev->kobj, old_class_name);
+	}
 	class_device_put(class_dev);
 
+	kfree(old_class_name);
+	kfree(new_class_name);
+
 	return error;
 }
 
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index d5bbce38282..3565e979530 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -40,6 +40,9 @@
  */
 void device_bind_driver(struct device * dev)
 {
+	if (klist_node_attached(&dev->knode_driver))
+		return;
+
 	pr_debug("bound device '%s' to driver '%s'\n",
 		 dev->bus_id, dev->driver->name);
 	klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index aa0bf7ee008..ed4d5006fe6 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -172,7 +172,7 @@ struct bulk_cs_wrap {
  */
 struct ub_dev;
 
-#define UB_MAX_REQ_SG	4
+#define UB_MAX_REQ_SG	9	/* cdrecord requires 32KB and maybe a header */
 #define UB_MAX_SECTORS 64
 
 /*
@@ -387,7 +387,7 @@ struct ub_dev {
 	struct bulk_cs_wrap work_bcs;
 	struct usb_ctrlrequest work_cr;
 
-	int sg_stat[UB_MAX_REQ_SG+1];
+	int sg_stat[6];
 	struct ub_scsi_trace tr;
 };
 
@@ -525,12 +525,13 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr,
 	    "qlen %d qmax %d\n",
 	    sc->cmd_queue.qlen, sc->cmd_queue.qmax);
 	cnt += sprintf(page + cnt,
-	    "sg %d %d %d %d %d\n",
+	    "sg %d %d %d %d %d .. %d\n",
 	    sc->sg_stat[0],
 	    sc->sg_stat[1],
 	    sc->sg_stat[2],
 	    sc->sg_stat[3],
-	    sc->sg_stat[4]);
+	    sc->sg_stat[4],
+	    sc->sg_stat[5]);
 
 	list_for_each (p, &sc->luns) {
 		lun = list_entry(p, struct ub_lun, link);
@@ -835,7 +836,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
 		return -1;
 	}
 	cmd->nsg = n_elem;
-	sc->sg_stat[n_elem]++;
+	sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
 
 	/*
 	 * build the command
@@ -891,7 +892,7 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
 		return -1;
 	}
 	cmd->nsg = n_elem;
-	sc->sg_stat[n_elem]++;
+	sc->sg_stat[n_elem < 5 ? n_elem : 5]++;
 
 	memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
 	cmd->cdb_len = rq->cmd_len;
@@ -1010,7 +1011,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	sc->last_pipe = sc->send_bulk_pipe;
 	usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
 	    bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
-	sc->work_urb.transfer_flags = 0;
 
 	/* Fill what we shouldn't be filling, because usb-storage did so. */
 	sc->work_urb.actual_length = 0;
@@ -1019,7 +1019,6 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
 	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
 		/* XXX Clear stalls */
-		printk("ub: cmd #%d start failed (%d)\n", cmd->tag, rc); /* P3 */
 		ub_complete(&sc->work_done);
 		return rc;
 	}
@@ -1190,11 +1189,9 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			return;
 		}
 		if (urb->status != 0) {
-			printk("ub: cmd #%d cmd status (%d)\n", cmd->tag, urb->status); /* P3 */
 			goto Bad_End;
 		}
 		if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
-			printk("ub: cmd #%d xferred %d\n", cmd->tag, urb->actual_length); /* P3 */
 			/* XXX Must do reset here to unconfuse the device */
 			goto Bad_End;
 		}
@@ -1395,14 +1392,12 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe,
 	    page_address(sg->page) + sg->offset, sg->length,
 	    ub_urb_complete, sc);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
 
 	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
 		/* XXX Clear stalls */
-		printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */
 		ub_complete(&sc->work_done);
 		ub_state_done(sc, cmd, rc);
 		return;
@@ -1442,7 +1437,6 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	sc->last_pipe = sc->recv_bulk_pipe;
 	usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
 	    &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
@@ -1563,7 +1557,6 @@ static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 
 	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
 	    (unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
@@ -2000,17 +1993,16 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
 
 	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
 	    (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
 
 	if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
 		if (rc == -EPIPE) {
-			printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+			printk("%s: Stall submitting GetMaxLUN, using 1 LUN\n",
 			     sc->name); /* P3 */
 		} else {
-			printk(KERN_WARNING
+			printk(KERN_NOTICE
 			     "%s: Unable to submit GetMaxLUN (%d)\n",
 			     sc->name, rc);
 		}
@@ -2028,6 +2020,18 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
 	del_timer_sync(&timer);
 	usb_kill_urb(&sc->work_urb);
 
+	if ((rc = sc->work_urb.status) < 0) {
+		if (rc == -EPIPE) {
+			printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+			     sc->name); /* P3 */
+		} else {
+			printk(KERN_NOTICE
+			     "%s: Error at GetMaxLUN (%d)\n",
+			     sc->name, rc);
+		}
+		goto err_io;
+	}
+
 	if (sc->work_urb.actual_length != 1) {
 		printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
 		    sc->work_urb.actual_length); /* P3 */
@@ -2048,6 +2052,7 @@ static int ub_sync_getmaxlun(struct ub_dev *sc)
 	kfree(p);
 	return nluns;
 
+err_io:
 err_submit:
 	kfree(p);
 err_alloc:
@@ -2080,7 +2085,6 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
 
 	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
 	    (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
-	sc->work_urb.transfer_flags = 0;
 	sc->work_urb.actual_length = 0;
 	sc->work_urb.error_count = 0;
 	sc->work_urb.status = 0;
@@ -2213,8 +2217,10 @@ static int ub_probe(struct usb_interface *intf,
 	 * This is needed to clear toggles. It is a problem only if we do
 	 * `rmmod ub && modprobe ub` without disconnects, but we like that.
 	 */
+#if 0 /* iPod Mini fails if we do this (big white iPod works) */
 	ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
 	ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+#endif
 
 	/*
 	 * The way this is used by the startup code is a little specific.
@@ -2241,10 +2247,10 @@ static int ub_probe(struct usb_interface *intf,
 	for (i = 0; i < 3; i++) {
 		if ((rc = ub_sync_getmaxlun(sc)) < 0) {
 			/* 
-			 * Some devices (i.e. Iomega Zip100) need this --
-			 * apparently the bulk pipes get STALLed when the
-			 * GetMaxLUN request is processed.
-			 * XXX I have a ZIP-100, verify it does this.
+			 * This segment is taken from usb-storage. They say
+			 * that ZIP-100 needs this, but my own ZIP-100 works
+			 * fine without this.
+			 * Still, it does not seem to hurt anything.
 			 */
 			if (rc == -EPIPE) {
 				ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
@@ -2313,7 +2319,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum)
 	disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
 	disk->fops = &ub_bd_fops;
 	disk->private_data = lun;
-	disk->driverfs_dev = &sc->intf->dev;	/* XXX Many to one ok? */
+	disk->driverfs_dev = &sc->intf->dev;
 
 	rc = -ENOMEM;
 	if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
@@ -2466,9 +2472,6 @@ static int __init ub_init(void)
 {
 	int rc;
 
-	/* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
-			sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
-
 	if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
 		goto err_regblkdev;
 	devfs_mk_dir(DEVFS_NAME);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 90449a0f2a6..6d00c3de1a8 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1653,7 +1653,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
 	int old_features = bond_dev->features;
 	int res = 0;
 
-	if (slave_dev->do_ioctl == NULL) {
+	if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
+		slave_dev->do_ioctl == NULL) {
 		printk(KERN_WARNING DRV_NAME
 		       ": Warning : no link monitoring support for %s\n",
 		       slave_dev->name);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index cbc60ce365c..40c40eba258 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -100,11 +100,11 @@ VERSION 2.2LK	<2005/01/25>
 
 #ifdef CONFIG_R8169_NAPI
 #define rtl8169_rx_skb			netif_receive_skb
-#define rtl8169_rx_hwaccel_skb		vlan_hwaccel_rx
+#define rtl8169_rx_hwaccel_skb		vlan_hwaccel_receive_skb
 #define rtl8169_rx_quota(count, quota)	min(count, quota)
 #else
 #define rtl8169_rx_skb			netif_rx
-#define rtl8169_rx_hwaccel_skb		vlan_hwaccel_receive_skb
+#define rtl8169_rx_hwaccel_skb		vlan_hwaccel_rx
 #define rtl8169_rx_quota(count, quota)	count
 #endif
 
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 7ce734ec6ba..189203c9533 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
 #include "skge.h"
 
 #define DRV_NAME		"skge"
-#define DRV_VERSION		"1.0"
+#define DRV_VERSION		"1.1"
 #define PFX			DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE	128
@@ -105,41 +105,28 @@ static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F };
 static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F };
 static const u32 portirqmask[] = { IS_PORT_1, IS_PORT_2 };
 
-/* Don't need to look at whole 16K.
- * last interesting register is descriptor poll timer.
- */
-#define SKGE_REGS_LEN	(29*128)
-
 static int skge_get_regs_len(struct net_device *dev)
 {
-	return SKGE_REGS_LEN;
+	return 0x4000;
 }
 
 /*
- * Returns copy of control register region
- * I/O region is divided into banks and certain regions are unreadable
+ * Returns copy of whole control register region
+ * Note: skip RAM address register because accessing it will
+ * 	 cause bus hangs!
  */
 static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 			  void *p)
 {
 	const struct skge_port *skge = netdev_priv(dev);
-	unsigned long offs;
 	const void __iomem *io = skge->hw->regs;
-	static const unsigned long bankmap
-		= (1<<0) | (1<<2) | (1<<8) | (1<<9)
-		  | (1<<12) | (1<<13) | (1<<14) | (1<<15) | (1<<16)
-		  | (1<<17) | (1<<20) | (1<<21) | (1<<22) | (1<<23)
-		  | (1<<24)  | (1<<25) | (1<<26) | (1<<27) | (1<<28);
 
 	regs->version = 1;
-	for (offs = 0; offs < regs->len; offs += 128) {
-		u32 len = min_t(u32, 128, regs->len - offs);
+	memset(p, 0, regs->len);
+	memcpy_fromio(p, io, B3_RAM_ADDR);
 
-		if (bankmap & (1<<(offs/128)))
-			memcpy_fromio(p + offs, io + offs, len);
-		else
-			memset(p + offs, 0, len);
-	}
+	memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
+		      regs->len - B3_RI_WTO_R1);
 }
 
 /* Wake on Lan only supported on Yukon chps with rev 1 or above */
@@ -776,17 +763,6 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base)
 	return 0;
 }
 
-static struct sk_buff *skge_rx_alloc(struct net_device *dev, unsigned int size)
-{
-	struct sk_buff *skb = dev_alloc_skb(size);
-
-	if (likely(skb)) {
-		skb->dev = dev;
-		skb_reserve(skb, NET_IP_ALIGN);
-	}
-	return skb;
-}
-
 /* Allocate and setup a new buffer for receiving */
 static void skge_rx_setup(struct skge_port *skge, struct skge_element *e,
 			  struct sk_buff *skb, unsigned int bufsize)
@@ -859,16 +835,17 @@ static int skge_rx_fill(struct skge_port *skge)
 {
 	struct skge_ring *ring = &skge->rx_ring;
 	struct skge_element *e;
-	unsigned int bufsize = skge->rx_buf_size;
 
 	e = ring->start;
 	do {
-		struct sk_buff *skb = skge_rx_alloc(skge->netdev, bufsize);
+		struct sk_buff *skb;
 
+		skb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
 		if (!skb)
 			return -ENOMEM;
 
-		skge_rx_setup(skge, e, skb, bufsize);
+		skb_reserve(skb, NET_IP_ALIGN);
+		skge_rx_setup(skge, e, skb, skge->rx_buf_size);
 	} while ( (e = e->next) != ring->start);
 
 	ring->to_clean = ring->start;
@@ -2443,6 +2420,14 @@ static void yukon_set_multicast(struct net_device *dev)
 	gma_write16(hw, port, GM_RX_CTRL, reg);
 }
 
+static inline u16 phy_length(const struct skge_hw *hw, u32 status)
+{
+	if (hw->chip_id == CHIP_ID_GENESIS)
+		return status >> XMR_FS_LEN_SHIFT;
+	else
+		return status >> GMR_FS_LEN_SHIFT;
+}
+
 static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
 {
 	if (hw->chip_id == CHIP_ID_GENESIS)
@@ -2452,80 +2437,99 @@ static inline int bad_phy_status(const struct skge_hw *hw, u32 status)
 			(status & GMR_FS_RX_OK) == 0;
 }
 
-static void skge_rx_error(struct skge_port *skge, int slot,
-			  u32 control, u32 status)
-{
-	if (netif_msg_rx_err(skge))
-		printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n",
-		       skge->netdev->name, slot, control, status);
-
-	if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF))
-		skge->net_stats.rx_length_errors++;
-	else if (skge->hw->chip_id == CHIP_ID_GENESIS) {
-		if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
-			skge->net_stats.rx_length_errors++;
-		if (status & XMR_FS_FRA_ERR)
-			skge->net_stats.rx_frame_errors++;
-		if (status & XMR_FS_FCS_ERR)
-			skge->net_stats.rx_crc_errors++;
-	} else {
-		if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
-			skge->net_stats.rx_length_errors++;
-		if (status & GMR_FS_FRAGMENT)
-			skge->net_stats.rx_frame_errors++;
-		if (status & GMR_FS_CRC_ERR)
-			skge->net_stats.rx_crc_errors++;
-	}
-}
 
 /* Get receive buffer from descriptor.
  * Handles copy of small buffers and reallocation failures
  */
 static inline struct sk_buff *skge_rx_get(struct skge_port *skge,
 					  struct skge_element *e,
-					  unsigned int len)
+					  u32 control, u32 status, u16 csum)
 {
-	struct sk_buff *nskb, *skb;
+	struct sk_buff *skb;
+	u16 len = control & BMU_BBC;
+
+	if (unlikely(netif_msg_rx_status(skge)))
+		printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
+		       skge->netdev->name, e - skge->rx_ring.start,
+		       status, len);
+
+	if (len > skge->rx_buf_size)
+		goto error;
+
+	if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF))
+		goto error;
+
+	if (bad_phy_status(skge->hw, status))
+		goto error;
+
+	if (phy_length(skge->hw, status) != len)
+		goto error;
 
 	if (len < RX_COPY_THRESHOLD) {
-		nskb = skge_rx_alloc(skge->netdev, len + NET_IP_ALIGN);
-		if (unlikely(!nskb))
-			return NULL;
+		skb = dev_alloc_skb(len + 2);
+		if (!skb)
+			goto resubmit;
 
+		skb_reserve(skb, 2);
 		pci_dma_sync_single_for_cpu(skge->hw->pdev,
 					    pci_unmap_addr(e, mapaddr),
 					    len, PCI_DMA_FROMDEVICE);
-		memcpy(nskb->data, e->skb->data, len);
+		memcpy(skb->data, e->skb->data, len);
 		pci_dma_sync_single_for_device(skge->hw->pdev,
 					       pci_unmap_addr(e, mapaddr),
 					       len, PCI_DMA_FROMDEVICE);
-
-		if (skge->rx_csum) {
-			struct skge_rx_desc *rd = e->desc;
-			nskb->csum = le16_to_cpu(rd->csum2);
-			nskb->ip_summed = CHECKSUM_HW;
-		}
 		skge_rx_reuse(e, skge->rx_buf_size);
-		return nskb;
 	} else {
-		nskb = skge_rx_alloc(skge->netdev, skge->rx_buf_size);
-		if (unlikely(!nskb))
-			return NULL;
+		struct sk_buff *nskb;
+		nskb = dev_alloc_skb(skge->rx_buf_size + NET_IP_ALIGN);
+		if (!nskb)
+			goto resubmit;
 
 		pci_unmap_single(skge->hw->pdev,
 				 pci_unmap_addr(e, mapaddr),
 				 pci_unmap_len(e, maplen),
 				 PCI_DMA_FROMDEVICE);
 		skb = e->skb;
-		if (skge->rx_csum) {
-			struct skge_rx_desc *rd = e->desc;
-			skb->csum = le16_to_cpu(rd->csum2);
-			skb->ip_summed = CHECKSUM_HW;
-		}
-
+  		prefetch(skb->data);
 		skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
-		return skb;
 	}
+
+	skb_put(skb, len);
+	skb->dev = skge->netdev;
+	if (skge->rx_csum) {
+		skb->csum = csum;
+		skb->ip_summed = CHECKSUM_HW;
+	}
+
+	skb->protocol = eth_type_trans(skb, skge->netdev);
+
+	return skb;
+error:
+
+	if (netif_msg_rx_err(skge))
+		printk(KERN_DEBUG PFX "%s: rx err, slot %td control 0x%x status 0x%x\n",
+		       skge->netdev->name, e - skge->rx_ring.start,
+		       control, status);
+
+	if (skge->hw->chip_id == CHIP_ID_GENESIS) {
+		if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR))
+			skge->net_stats.rx_length_errors++;
+		if (status & XMR_FS_FRA_ERR)
+			skge->net_stats.rx_frame_errors++;
+		if (status & XMR_FS_FCS_ERR)
+			skge->net_stats.rx_crc_errors++;
+	} else {
+		if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE))
+			skge->net_stats.rx_length_errors++;
+		if (status & GMR_FS_FRAGMENT)
+			skge->net_stats.rx_frame_errors++;
+		if (status & GMR_FS_CRC_ERR)
+			skge->net_stats.rx_crc_errors++;
+	}
+
+resubmit:
+	skge_rx_reuse(e, skge->rx_buf_size);
+	return NULL;
 }
 
 
@@ -2541,32 +2545,16 @@ static int skge_poll(struct net_device *dev, int *budget)
 	for (e = ring->to_clean; work_done < to_do; e = e->next) {
 		struct skge_rx_desc *rd = e->desc;
 		struct sk_buff *skb;
-		u32 control, len, status;
+		u32 control;
 
 		rmb();
 		control = rd->control;
 		if (control & BMU_OWN)
 			break;
 
-		len = control & BMU_BBC;
-		status = rd->status;
-
-		if (unlikely((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)
-			     || bad_phy_status(hw, status))) {
-			skge_rx_error(skge, e - ring->start, control, status);
-			skge_rx_reuse(e, skge->rx_buf_size);
-			continue;
-		}
-
-		if (netif_msg_rx_status(skge))
-		    printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n",
-			   dev->name, e - ring->start, rd->status, len);
-
-		skb = skge_rx_get(skge, e, len);
+ 		skb = skge_rx_get(skge, e, control, rd->status,
+ 				  le16_to_cpu(rd->csum2));
 		if (likely(skb)) {
-			skb_put(skb, len);
-			skb->protocol = eth_type_trans(skb, dev);
-
 			dev->last_rx = jiffies;
 			netif_receive_skb(skb);
 
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index efbf98c675d..72c175b87a5 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -953,6 +953,7 @@ enum {
  */
 enum {
 	XMR_FS_LEN	= 0x3fff<<18,	/* Bit 31..18:	Rx Frame Length */
+	XMR_FS_LEN_SHIFT = 18,
 	XMR_FS_2L_VLAN	= 1<<17, /* Bit 17:	tagged wh 2Lev VLAN ID*/
 	XMR_FS_1_VLAN	= 1<<16, /* Bit 16:	tagged wh 1ev VLAN ID*/
 	XMR_FS_BC	= 1<<15, /* Bit 15:	Broadcast Frame */
@@ -1868,6 +1869,7 @@ enum {
 /* Receive Frame Status Encoding */
 enum {
 	GMR_FS_LEN	= 0xffff<<16, /* Bit 31..16:	Rx Frame Length */
+	GMR_FS_LEN_SHIFT = 16,
 	GMR_FS_VLAN	= 1<<13, /* Bit 13:	VLAN Packet */
 	GMR_FS_JABBER	= 1<<12, /* Bit 12:	Jabber Packet */
 	GMR_FS_UN_SIZE	= 1<<11, /* Bit 11:	Undersize Packet */
diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
index 10444988a10..e1743be3190 100644
--- a/drivers/pci/hotplug.c
+++ b/drivers/pci/hotplug.c
@@ -7,7 +7,6 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
 		 char *buffer, int buffer_size)
 {
 	struct pci_dev *pdev;
-	char *scratch;
 	int i = 0;
 	int length = 0;
 
@@ -18,9 +17,6 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp,
 	if (!pdev)
 		return -ENODEV;
 
-	scratch = buffer;
-
-
 	if (add_hotplug_env_var(envp, num_envp, &i,
 				buffer, buffer_size, &length,
 				"PCI_CLASS=%04X", pdev->class))
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index 752e6513c44..db69be85b45 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -62,7 +62,7 @@ static ssize_t add_slot_store(struct dlpar_io_attr *dlpar_attr,
 	char drc_name[MAX_DRC_NAME_LEN];
 	char *end;
 
-	if (nbytes > MAX_DRC_NAME_LEN)
+	if (nbytes >= MAX_DRC_NAME_LEN)
 		return 0;
 
 	memcpy(drc_name, buf, nbytes);
@@ -83,7 +83,7 @@ static ssize_t remove_slot_store(struct dlpar_io_attr *dlpar_attr,
 	char drc_name[MAX_DRC_NAME_LEN];
 	char *end;
 
-	if (nbytes > MAX_DRC_NAME_LEN)
+	if (nbytes >= MAX_DRC_NAME_LEN)
 		return 0;
 
 	memcpy(drc_name, buf, nbytes);
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index b1409441c1c..a32ae82e592 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -159,7 +159,7 @@ static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot,
 
 	pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
 
-	slot = kcalloc(1, sizeof(*slot), GFP_KERNEL);
+	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
 	if (!slot)
 		return -ENOMEM;
 	bss_hotplug_slot->private = slot;
@@ -491,7 +491,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
 		if (sn_pci_slot_valid(pci_bus, device) != 1)
 			continue;
 
-		bss_hotplug_slot = kcalloc(1, sizeof(*bss_hotplug_slot),
+		bss_hotplug_slot = kzalloc(sizeof(*bss_hotplug_slot),
 					   GFP_KERNEL);
 		if (!bss_hotplug_slot) {
 			rc = -ENOMEM;
@@ -499,7 +499,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
 		}
 
 		bss_hotplug_slot->info =
-			kcalloc(1, sizeof(struct hotplug_slot_info),
+			kzalloc(sizeof(struct hotplug_slot_info),
 				GFP_KERNEL);
 		if (!bss_hotplug_slot->info) {
 			rc = -ENOMEM;
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 56a3b397efe..2898830c496 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -360,7 +360,7 @@ pci_create_resource_files(struct pci_dev *pdev)
 			continue;
 
 		/* allocate attribute structure, piggyback attribute name */
-		res_attr = kcalloc(1, sizeof(*res_attr) + 10, GFP_ATOMIC);
+		res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
 		if (res_attr) {
 			char *res_attr_name = (char *)(res_attr + 1);
 
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 26a55d08b50..c77d5b1bbff 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -165,7 +165,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 		if (l == 0xffffffff)
 			l = 0;
 		if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
-			sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK);
+			sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
 			if (!sz)
 				continue;
 			res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
@@ -215,7 +215,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 		if (l == 0xffffffff)
 			l = 0;
 		if (sz && sz != 0xffffffff) {
-			sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK);
+			sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK);
 			if (sz) {
 				res->flags = (l & IORESOURCE_ROM_ENABLE) |
 				  IORESOURCE_MEM | IORESOURCE_PREFETCH |
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 91ea8e4777f..dbb3eb0e330 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -437,7 +437,7 @@ __ccwgroup_get_gdev_by_cdev(struct ccw_device *cdev)
 	if (cdev->dev.driver_data) {
 		gdev = (struct ccwgroup_device *)cdev->dev.driver_data;
 		if (get_device(&gdev->dev)) {
-			if (klist_node_attached(&gdev->dev.knode_bus))
+			if (device_is_registered(&gdev->dev))
 				return gdev;
 			put_device(&gdev->dev);
 		}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index c47c8052b48..f1fb67fe22a 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -987,7 +987,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 
 			/* remove this interface if it has been registered */
 			interface = dev->actconfig->interface[i];
-			if (!klist_node_attached(&interface->dev.knode_bus))
+			if (!device_is_registered(&interface->dev))
 				continue;
 			dev_dbg (&dev->dev, "unregistering interface %s\n",
 				interface->dev.bus_id);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 087af73a59d..7d131509e41 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -303,7 +303,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 	/* if interface was already added, bind now; else let
 	 * the future device_add() bind it, bypassing probe()
 	 */
-	if (klist_node_attached(&dev->knode_bus))
+	if (device_is_registered(dev))
 		device_bind_driver(dev);
 
 	return 0;
@@ -336,8 +336,8 @@ void usb_driver_release_interface(struct usb_driver *driver,
 	if (iface->condition != USB_INTERFACE_BOUND)
 		return;
 
-	/* release only after device_add() */
-	if (klist_node_attached(&dev->knode_bus)) {
+	/* don't release if the interface hasn't been added yet */
+	if (device_is_registered(dev)) {
 		iface->condition = USB_INTERFACE_UNBINDING;
 		device_release_driver(dev);
 	}
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 1507738337c..73f8c940415 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -422,7 +422,7 @@ static inline void ep0_idle (struct pxa2xx_udc *dev)
 }
 
 static int
-write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max)
 {
 	u8		*buf;
 	unsigned	length, count;
@@ -2602,7 +2602,7 @@ static int __exit pxa2xx_udc_remove(struct device *_dev)
  * VBUS IRQs should probably be ignored so that the PXA device just acts
  * "dead" to USB hosts until system resume.
  */
-static int pxa2xx_udc_suspend(struct device *dev, u32 state, u32 level)
+static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level)
 {
 	struct pxa2xx_udc	*udc = dev_get_drvdata(dev);
 
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index d0bc396a85d..a58f3e6e71f 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -69,11 +69,11 @@ struct pxa2xx_ep {
 	 * UDDR = UDC Endpoint Data Register (the fifo)
 	 * DRCM = DMA Request Channel Map
 	 */
-	volatile u32				*reg_udccs;
-	volatile u32				*reg_ubcr;
-	volatile u32				*reg_uddr;
+	volatile unsigned long			*reg_udccs;
+	volatile unsigned long			*reg_ubcr;
+	volatile unsigned long			*reg_uddr;
 #ifdef USE_DMA
-	volatile u32				*reg_drcmr;
+	volatile unsigned long			*reg_drcmr;
 #define	drcmr(n)  .reg_drcmr = & DRCMR ## n ,
 #else
 #define	drcmr(n)  
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index d2a1fd40dfc..d42a15d10a4 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -782,6 +782,9 @@ retry:
 /* usb 1.1 says max 90% of a frame is available for periodic transfers.
  * this driver doesn't promise that much since it's got to handle an
  * IRQ per packet; irq handling latencies also use up that time.
+ *
+ * NOTE:  the periodic schedule is a sparse tree, with the load for
+ * each branch minimized.  see fig 3.5 in the OHCI spec for example.
  */
 #define	MAX_PERIODIC_LOAD	500	/* out of 1000 usec */
 
@@ -843,6 +846,7 @@ static int sl811h_urb_enqueue(
 	if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
 			|| !HC_IS_RUNNING(hcd->state)) {
 		retval = -ENODEV;
+		kfree(ep);
 		goto fail;
 	}
 
@@ -911,8 +915,16 @@ static int sl811h_urb_enqueue(
 	case PIPE_ISOCHRONOUS:
 	case PIPE_INTERRUPT:
 		urb->interval = ep->period;
-		if (ep->branch < PERIODIC_SIZE)
+		if (ep->branch < PERIODIC_SIZE) {
+			/* NOTE:  the phase is correct here, but the value
+			 * needs offsetting by the transfer queue depth.
+			 * All current drivers ignore start_frame, so this
+			 * is unlikely to ever matter...
+			 */
+			urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1))
+						+ ep->branch;
 			break;
+		}
 
 		retval = balance(sl811, ep->period, ep->load);
 		if (retval < 0)
@@ -1122,7 +1134,7 @@ sl811h_hub_descriptor (
 	desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
 
 	/* two bitmaps:  ports removable, and legacy PortPwrCtrlMask */
-	desc->bitmap[0] = 1 << 1;
+	desc->bitmap[0] = 0 << 1;
 	desc->bitmap[1] = ~0;
 }
 
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 7484d34780f..6a4ffe6c397 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -648,6 +648,13 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 	}
 
 	/*
+	 * If the packet is unreasonably long, quietly drop it rather than
+	 * kernel panicing by calling skb_put.
+	 */
+	if (pkt_len > PEGASUS_MTU)
+		goto goon;
+
+	/*
 	 * at this point we are sure pegasus->rx_skb != NULL
 	 * so we go ahead and pass up the packet.
 	 */
@@ -886,15 +893,17 @@ static inline void get_interrupt_interval(pegasus_t * pegasus)
 	__u8 data[2];
 
 	read_eprom_word(pegasus, 4, (__u16 *) data);
-	if (data[1] < 0x80) {
-		if (netif_msg_timer(pegasus))
-			dev_info(&pegasus->intf->dev,
-				"intr interval changed from %ums to %ums\n",
-				data[1], 0x80);
-		data[1] = 0x80;
-#ifdef	PEGASUS_WRITE_EEPROM
-		write_eprom_word(pegasus, 4, *(__u16 *) data);
+	if (pegasus->usb->speed != USB_SPEED_HIGH) {
+		if (data[1] < 0x80) {
+			if (netif_msg_timer(pegasus))
+				dev_info(&pegasus->intf->dev, "intr interval "
+					"changed from %ums to %ums\n",
+					data[1], 0x80);
+			data[1] = 0x80;
+#ifdef PEGASUS_WRITE_EEPROM
+			write_eprom_word(pegasus, 4, *(__u16 *) data);
 #endif
+		}
 	}
 	pegasus->intr_interval = data[1];
 }
@@ -904,8 +913,9 @@ static void set_carrier(struct net_device *net)
 	pegasus_t *pegasus = netdev_priv(net);
 	u16 tmp;
 
-	if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+	if (!read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
 		return;
+
 	if (tmp & BMSR_LSTATUS)
 		netif_carrier_on(net);
 	else
@@ -1355,6 +1365,7 @@ static void pegasus_disconnect(struct usb_interface *intf)
 	cancel_delayed_work(&pegasus->carrier_check);
 	unregister_netdev(pegasus->net);
 	usb_put_dev(interface_to_usbdev(intf));
+	unlink_all_urbs(pegasus);
 	free_all_urbs(pegasus);
 	free_skb_pool(pegasus);
 	if (pegasus->rx_skb)
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index a4ce0008d69..926d4c2c160 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -16,7 +16,8 @@
 #include "usb-serial.h"
 
 static struct usb_device_id id_table [] = {
-	{ USB_DEVICE(0xf3d, 0x0112) },
+	{ USB_DEVICE(0xf3d, 0x0112) },  /* AirPrime CDMA Wireless PC Card */
+	{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4e434cb10bb..5a8631c8a4a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1846,10 +1846,12 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_
 	} else {
 		/* set the baudrate determined before */
 		if (change_speed(port)) {
-			err("%s urb failed to set baurdrate", __FUNCTION__);
+			err("%s urb failed to set baudrate", __FUNCTION__);
+		}
+		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
+		if ((old_termios->c_cflag & CBAUD) == B0) {
+			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 		}
-		/* Ensure  RTS and DTR are raised */
-		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	}
 
 	/* Set flow control */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 92d0f925d05..4989e5740d1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -25,6 +25,9 @@
   2005-06-20  v0.4.1 add missing braces :-/
                      killed end-of-line whitespace
   2005-07-15  v0.4.2 rename WLAN product to FUSION, add FUSION2
+  2005-09-10  v0.4.3 added HUAWEI E600 card and Audiovox AirCard
+  2005-09-20  v0.4.4 increased recv buffer size: the card sometimes
+                     wants to send >2000 bytes.
 
   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 
@@ -71,15 +74,21 @@ static int  option_send_setup(struct usb_serial_port *port);
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
+#define HUAWEI_VENDOR_ID			0x12D1
+#define AUDIOVOX_VENDOR_ID			0x0F3D
 
 #define OPTION_PRODUCT_OLD		0x5000
 #define OPTION_PRODUCT_FUSION	0x6000
 #define OPTION_PRODUCT_FUSION2	0x6300
+#define HUAWEI_PRODUCT_E600     0x1001
+#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
+	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ } /* Terminating entry */
 };
 
@@ -132,7 +141,7 @@ static int debug;
 
 #define N_IN_URB 4
 #define N_OUT_URB 1
-#define IN_BUFLEN 1024
+#define IN_BUFLEN 4096
 #define OUT_BUFLEN 128
 
 struct option_port_private {
diff --git a/include/linux/device.h b/include/linux/device.h
index 06e5d42f2c7..95d607a48f0 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -317,6 +317,11 @@ dev_set_drvdata (struct device *dev, void *data)
 	dev->driver_data = data;
 }
 
+static inline int device_is_registered(struct device *dev)
+{
+	return klist_node_attached(&dev->knode_bus);
+}
+
 /*
  * High level routines for use by the bus drivers
  */