summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorHans-Christian Egtvedt <hcegtvedt@atmel.com>2007-10-16 23:26:11 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-17 08:42:47 -0700
commiteb1f2930609bb01bb3a970f145b5004e5163742a (patch)
treec22f195dbc5f58bba7cd82c4a09136b2a553086e
parent94f582f82a85a941678c80c60a3baa8187c74217 (diff)
Driver for the Atmel on-chip SSC on AT32AP and AT91
The Synchronous Serial Controller (SSC) on Atmel microprocessors are capable of tranceiving many frame based protocols, like I2S. Tested on the AT32AP7000/ATSTK1000. This driver is used in the ALSA sound driver for the AT73C213 external DAC on the ATSTK1000 development board for AVR32. This sound driver will be submitted soon. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 [akpm@linux-foundation.org: init spinlock at compile time] Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/misc/Kconfig12
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/atmel-ssc.c174
-rw-r--r--include/linux/atmel-ssc.h312
4 files changed, 499 insertions, 0 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 73e248fb2ff..346c44eff95 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -203,4 +203,16 @@ config THINKPAD_ACPI_BAY
If you are not sure, say Y here.
+config ATMEL_SSC
+ tristate "Device driver for Atmel SSC peripheral"
+ depends on AVR32 || ARCH_AT91
+ ---help---
+ This option enables device driver support for Atmel Syncronized
+ Serial Communication peripheral (SSC).
+
+ The SSC peripheral supports a wide variety of serial frame based
+ communications, i.e. I2S, SPI, etc.
+
+ If unsure, say N.
+
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index b5ce0e3dba8..a24c61475c2 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/
obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/
obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
+obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
new file mode 100644
index 00000000000..058ccac700d
--- /dev/null
+++ b/drivers/misc/atmel-ssc.c
@@ -0,0 +1,174 @@
+/*
+ * Atmel SSC driver
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/atmel-ssc.h>
+
+/* Serialize access to ssc_list and user count */
+static DEFINE_SPINLOCK(user_lock);
+static LIST_HEAD(ssc_list);
+
+struct ssc_device *ssc_request(unsigned int ssc_num)
+{
+ int ssc_valid = 0;
+ struct ssc_device *ssc;
+
+ spin_lock(&user_lock);
+ list_for_each_entry(ssc, &ssc_list, list) {
+ if (ssc->pdev->id == ssc_num) {
+ ssc_valid = 1;
+ break;
+ }
+ }
+
+ if (!ssc_valid) {
+ spin_unlock(&user_lock);
+ dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ if (ssc->user) {
+ spin_unlock(&user_lock);
+ dev_dbg(&ssc->pdev->dev, "module busy\n");
+ return ERR_PTR(-EBUSY);
+ }
+ ssc->user++;
+ spin_unlock(&user_lock);
+
+ clk_enable(ssc->clk);
+
+ return ssc;
+}
+EXPORT_SYMBOL(ssc_request);
+
+void ssc_free(struct ssc_device *ssc)
+{
+ spin_lock(&user_lock);
+ if (ssc->user) {
+ ssc->user--;
+ clk_disable(ssc->clk);
+ } else {
+ dev_dbg(&ssc->pdev->dev, "device already free\n");
+ }
+ spin_unlock(&user_lock);
+}
+EXPORT_SYMBOL(ssc_free);
+
+static int __init ssc_probe(struct platform_device *pdev)
+{
+ int retval = 0;
+ struct resource *regs;
+ struct ssc_device *ssc;
+
+ ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
+ if (!ssc) {
+ dev_dbg(&pdev->dev, "out of memory\n");
+ retval = -ENOMEM;
+ goto out;
+ }
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs) {
+ dev_dbg(&pdev->dev, "no mmio resource defined\n");
+ retval = -ENXIO;
+ goto out_free;
+ }
+
+ ssc->clk = clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(ssc->clk)) {
+ dev_dbg(&pdev->dev, "no pclk clock defined\n");
+ retval = -ENXIO;
+ goto out_free;
+ }
+
+ ssc->pdev = pdev;
+ ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
+ if (!ssc->regs) {
+ dev_dbg(&pdev->dev, "ioremap failed\n");
+ retval = -EINVAL;
+ goto out_clk;
+ }
+
+ /* disable all interrupts */
+ clk_enable(ssc->clk);
+ ssc_writel(ssc->regs, IDR, ~0UL);
+ ssc_readl(ssc->regs, SR);
+ clk_disable(ssc->clk);
+
+ ssc->irq = platform_get_irq(pdev, 0);
+ if (!ssc->irq) {
+ dev_dbg(&pdev->dev, "could not get irq\n");
+ retval = -ENXIO;
+ goto out_unmap;
+ }
+
+ spin_lock(&user_lock);
+ list_add_tail(&ssc->list, &ssc_list);
+ spin_unlock(&user_lock);
+
+ platform_set_drvdata(pdev, ssc);
+
+ dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
+ ssc->regs, ssc->irq);
+
+ goto out;
+
+out_unmap:
+ iounmap(ssc->regs);
+out_clk:
+ clk_put(ssc->clk);
+out_free:
+ kfree(ssc);
+out:
+ return retval;
+}
+
+static int __devexit ssc_remove(struct platform_device *pdev)
+{
+ struct ssc_device *ssc = platform_get_drvdata(pdev);
+
+ spin_lock(&user_lock);
+ iounmap(ssc->regs);
+ clk_put(ssc->clk);
+ list_del(&ssc->list);
+ kfree(ssc);
+ spin_unlock(&user_lock);
+
+ return 0;
+}
+
+static struct platform_driver ssc_driver = {
+ .remove = __devexit_p(ssc_remove),
+ .driver = {
+ .name = "ssc",
+ },
+};
+
+static int __init ssc_init(void)
+{
+ return platform_driver_probe(&ssc_driver, ssc_probe);
+}
+module_init(ssc_init);
+
+static void __exit ssc_exit(void)
+{
+ platform_driver_unregister(&ssc_driver);
+}
+module_exit(ssc_exit);
+
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
new file mode 100644
index 00000000000..06023393fba
--- /dev/null
+++ b/include/linux/atmel-ssc.h
@@ -0,0 +1,312 @@
+#ifndef __INCLUDE_ATMEL_SSC_H
+#define __INCLUDE_ATMEL_SSC_H
+
+#include <linux/platform_device.h>
+#include <linux/list.h>
+
+struct ssc_device {
+ struct list_head list;
+ void __iomem *regs;
+ struct platform_device *pdev;
+ struct clk *clk;
+ int user;
+ int irq;
+};
+
+struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
+void ssc_free(struct ssc_device *ssc);
+
+/* SSC register offsets */
+
+/* SSC Control Register */
+#define SSC_CR 0x00000000
+#define SSC_CR_RXDIS_SIZE 1
+#define SSC_CR_RXDIS_OFFSET 1
+#define SSC_CR_RXEN_SIZE 1
+#define SSC_CR_RXEN_OFFSET 0
+#define SSC_CR_SWRST_SIZE 1
+#define SSC_CR_SWRST_OFFSET 15
+#define SSC_CR_TXDIS_SIZE 1
+#define SSC_CR_TXDIS_OFFSET 9
+#define SSC_CR_TXEN_SIZE 1
+#define SSC_CR_TXEN_OFFSET 8
+
+/* SSC Clock Mode Register */
+#define SSC_CMR 0x00000004
+#define SSC_CMR_DIV_SIZE 12
+#define SSC_CMR_DIV_OFFSET 0
+
+/* SSC Receive Clock Mode Register */
+#define SSC_RCMR 0x00000010
+#define SSC_RCMR_CKG_SIZE 2
+#define SSC_RCMR_CKG_OFFSET 6
+#define SSC_RCMR_CKI_SIZE 1
+#define SSC_RCMR_CKI_OFFSET 5
+#define SSC_RCMR_CKO_SIZE 3
+#define SSC_RCMR_CKO_OFFSET 2
+#define SSC_RCMR_CKS_SIZE 2
+#define SSC_RCMR_CKS_OFFSET 0
+#define SSC_RCMR_PERIOD_SIZE 8
+#define SSC_RCMR_PERIOD_OFFSET 24
+#define SSC_RCMR_START_SIZE 4
+#define SSC_RCMR_START_OFFSET 8
+#define SSC_RCMR_STOP_SIZE 1
+#define SSC_RCMR_STOP_OFFSET 12
+#define SSC_RCMR_STTDLY_SIZE 8
+#define SSC_RCMR_STTDLY_OFFSET 16
+
+/* SSC Receive Frame Mode Register */
+#define SSC_RFMR 0x00000014
+#define SSC_RFMR_DATLEN_SIZE 5
+#define SSC_RFMR_DATLEN_OFFSET 0
+#define SSC_RFMR_DATNB_SIZE 4
+#define SSC_RFMR_DATNB_OFFSET 8
+#define SSC_RFMR_FSEDGE_SIZE 1
+#define SSC_RFMR_FSEDGE_OFFSET 24
+#define SSC_RFMR_FSLEN_SIZE 4
+#define SSC_RFMR_FSLEN_OFFSET 16
+#define SSC_RFMR_FSOS_SIZE 4
+#define SSC_RFMR_FSOS_OFFSET 20
+#define SSC_RFMR_LOOP_SIZE 1
+#define SSC_RFMR_LOOP_OFFSET 5
+#define SSC_RFMR_MSBF_SIZE 1
+#define SSC_RFMR_MSBF_OFFSET 7
+
+/* SSC Transmit Clock Mode Register */
+#define SSC_TCMR 0x00000018
+#define SSC_TCMR_CKG_SIZE 2
+#define SSC_TCMR_CKG_OFFSET 6
+#define SSC_TCMR_CKI_SIZE 1
+#define SSC_TCMR_CKI_OFFSET 5
+#define SSC_TCMR_CKO_SIZE 3
+#define SSC_TCMR_CKO_OFFSET 2
+#define SSC_TCMR_CKS_SIZE 2
+#define SSC_TCMR_CKS_OFFSET 0
+#define SSC_TCMR_PERIOD_SIZE 8
+#define SSC_TCMR_PERIOD_OFFSET 24
+#define SSC_TCMR_START_SIZE 4
+#define SSC_TCMR_START_OFFSET 8
+#define SSC_TCMR_STTDLY_SIZE 8
+#define SSC_TCMR_STTDLY_OFFSET 16
+
+/* SSC Transmit Frame Mode Register */
+#define SSC_TFMR 0x0000001c
+#define SSC_TFMR_DATDEF_SIZE 1
+#define SSC_TFMR_DATDEF_OFFSET 5
+#define SSC_TFMR_DATLEN_SIZE 5
+#define SSC_TFMR_DATLEN_OFFSET 0
+#define SSC_TFMR_DATNB_SIZE 4
+#define SSC_TFMR_DATNB_OFFSET 8
+#define SSC_TFMR_FSDEN_SIZE 1
+#define SSC_TFMR_FSDEN_OFFSET 23
+#define SSC_TFMR_FSEDGE_SIZE 1
+#define SSC_TFMR_FSEDGE_OFFSET 24
+#define SSC_TFMR_FSLEN_SIZE 4
+#define SSC_TFMR_FSLEN_OFFSET 16
+#define SSC_TFMR_FSOS_SIZE 3
+#define SSC_TFMR_FSOS_OFFSET 20
+#define SSC_TFMR_MSBF_SIZE 1
+#define SSC_TFMR_MSBF_OFFSET 7
+
+/* SSC Receive Hold Register */
+#define SSC_RHR 0x00000020
+#define SSC_RHR_RDAT_SIZE 32
+#define SSC_RHR_RDAT_OFFSET 0
+
+/* SSC Transmit Hold Register */
+#define SSC_THR 0x00000024
+#define SSC_THR_TDAT_SIZE 32
+#define SSC_THR_TDAT_OFFSET 0
+
+/* SSC Receive Sync. Holding Register */
+#define SSC_RSHR 0x00000030
+#define SSC_RSHR_RSDAT_SIZE 16
+#define SSC_RSHR_RSDAT_OFFSET 0
+
+/* SSC Transmit Sync. Holding Register */
+#define SSC_TSHR 0x00000034
+#define SSC_TSHR_TSDAT_SIZE 16
+#define SSC_TSHR_RSDAT_OFFSET 0
+
+/* SSC Receive Compare 0 Register */
+#define SSC_RC0R 0x00000038
+#define SSC_RC0R_CP0_SIZE 16
+#define SSC_RC0R_CP0_OFFSET 0
+
+/* SSC Receive Compare 1 Register */
+#define SSC_RC1R 0x0000003c
+#define SSC_RC1R_CP1_SIZE 16
+#define SSC_RC1R_CP1_OFFSET 0
+
+/* SSC Status Register */
+#define SSC_SR 0x00000040
+#define SSC_SR_CP0_SIZE 1
+#define SSC_SR_CP0_OFFSET 8
+#define SSC_SR_CP1_SIZE 1
+#define SSC_SR_CP1_OFFSET 9
+#define SSC_SR_ENDRX_SIZE 1
+#define SSC_SR_ENDRX_OFFSET 6
+#define SSC_SR_ENDTX_SIZE 1
+#define SSC_SR_ENDTX_OFFSET 2
+#define SSC_SR_OVRUN_SIZE 1
+#define SSC_SR_OVRUN_OFFSET 5
+#define SSC_SR_RXBUFF_SIZE 1
+#define SSC_SR_RXBUFF_OFFSET 7
+#define SSC_SR_RXEN_SIZE 1
+#define SSC_SR_RXEN_OFFSET 17
+#define SSC_SR_RXRDY_SIZE 1
+#define SSC_SR_RXRDY_OFFSET 4
+#define SSC_SR_RXSYN_SIZE 1
+#define SSC_SR_RXSYN_OFFSET 11
+#define SSC_SR_TXBUFE_SIZE 1
+#define SSC_SR_TXBUFE_OFFSET 3
+#define SSC_SR_TXEMPTY_SIZE 1
+#define SSC_SR_TXEMPTY_OFFSET 1
+#define SSC_SR_TXEN_SIZE 1
+#define SSC_SR_TXEN_OFFSET 16
+#define SSC_SR_TXRDY_SIZE 1
+#define SSC_SR_TXRDY_OFFSET 0
+#define SSC_SR_TXSYN_SIZE 1
+#define SSC_SR_TXSYN_OFFSET 10
+
+/* SSC Interrupt Enable Register */
+#define SSC_IER 0x00000044
+#define SSC_IER_CP0_SIZE 1
+#define SSC_IER_CP0_OFFSET 8
+#define SSC_IER_CP1_SIZE 1
+#define SSC_IER_CP1_OFFSET 9
+#define SSC_IER_ENDRX_SIZE 1
+#define SSC_IER_ENDRX_OFFSET 6
+#define SSC_IER_ENDTX_SIZE 1
+#define SSC_IER_ENDTX_OFFSET 2
+#define SSC_IER_OVRUN_SIZE 1
+#define SSC_IER_OVRUN_OFFSET 5
+#define SSC_IER_RXBUFF_SIZE 1
+#define SSC_IER_RXBUFF_OFFSET 7
+#define SSC_IER_RXRDY_SIZE 1
+#define SSC_IER_RXRDY_OFFSET 4
+#define SSC_IER_RXSYN_SIZE 1
+#define SSC_IER_RXSYN_OFFSET 11
+#define SSC_IER_TXBUFE_SIZE 1
+#define SSC_IER_TXBUFE_OFFSET 3
+#define SSC_IER_TXEMPTY_SIZE 1
+#define SSC_IER_TXEMPTY_OFFSET 1
+#define SSC_IER_TXRDY_SIZE 1
+#define SSC_IER_TXRDY_OFFSET 0
+#define SSC_IER_TXSYN_SIZE 1
+#define SSC_IER_TXSYN_OFFSET 10
+
+/* SSC Interrupt Disable Register */
+#define SSC_IDR 0x00000048
+#define SSC_IDR_CP0_SIZE 1
+#define SSC_IDR_CP0_OFFSET 8
+#define SSC_IDR_CP1_SIZE 1
+#define SSC_IDR_CP1_OFFSET 9
+#define SSC_IDR_ENDRX_SIZE 1
+#define SSC_IDR_ENDRX_OFFSET 6
+#define SSC_IDR_ENDTX_SIZE 1
+#define SSC_IDR_ENDTX_OFFSET 2
+#define SSC_IDR_OVRUN_SIZE 1
+#define SSC_IDR_OVRUN_OFFSET 5
+#define SSC_IDR_RXBUFF_SIZE 1
+#define SSC_IDR_RXBUFF_OFFSET 7
+#define SSC_IDR_RXRDY_SIZE 1
+#define SSC_IDR_RXRDY_OFFSET 4
+#define SSC_IDR_RXSYN_SIZE 1
+#define SSC_IDR_RXSYN_OFFSET 11
+#define SSC_IDR_TXBUFE_SIZE 1
+#define SSC_IDR_TXBUFE_OFFSET 3
+#define SSC_IDR_TXEMPTY_SIZE 1
+#define SSC_IDR_TXEMPTY_OFFSET 1
+#define SSC_IDR_TXRDY_SIZE 1
+#define SSC_IDR_TXRDY_OFFSET 0
+#define SSC_IDR_TXSYN_SIZE 1
+#define SSC_IDR_TXSYN_OFFSET 10
+
+/* SSC Interrupt Mask Register */
+#define SSC_IMR 0x0000004c
+#define SSC_IMR_CP0_SIZE 1
+#define SSC_IMR_CP0_OFFSET 8
+#define SSC_IMR_CP1_SIZE 1
+#define SSC_IMR_CP1_OFFSET 9
+#define SSC_IMR_ENDRX_SIZE 1
+#define SSC_IMR_ENDRX_OFFSET 6
+#define SSC_IMR_ENDTX_SIZE 1
+#define SSC_IMR_ENDTX_OFFSET 2
+#define SSC_IMR_OVRUN_SIZE 1
+#define SSC_IMR_OVRUN_OFFSET 5
+#define SSC_IMR_RXBUFF_SIZE 1
+#define SSC_IMR_RXBUFF_OFFSET 7
+#define SSC_IMR_RXRDY_SIZE 1
+#define SSC_IMR_RXRDY_OFFSET 4
+#define SSC_IMR_RXSYN_SIZE 1
+#define SSC_IMR_RXSYN_OFFSET 11
+#define SSC_IMR_TXBUFE_SIZE 1
+#define SSC_IMR_TXBUFE_OFFSET 3
+#define SSC_IMR_TXEMPTY_SIZE 1
+#define SSC_IMR_TXEMPTY_OFFSET 1
+#define SSC_IMR_TXRDY_SIZE 1
+#define SSC_IMR_TXRDY_OFFSET 0
+#define SSC_IMR_TXSYN_SIZE 1
+#define SSC_IMR_TXSYN_OFFSET 10
+
+/* SSC PDC Receive Pointer Register */
+#define SSC_PDC_RPR 0x00000100
+
+/* SSC PDC Receive Counter Register */
+#define SSC_PDC_RCR 0x00000104
+
+/* SSC PDC Transmit Pointer Register */
+#define SSC_PDC_TPR 0x00000108
+
+/* SSC PDC Receive Next Pointer Register */
+#define SSC_PDC_RNPR 0x00000110
+
+/* SSC PDC Receive Next Counter Register */
+#define SSC_PDC_RNCR 0x00000114
+
+/* SSC PDC Transmit Counter Register */
+#define SSC_PDC_TCR 0x0000010c
+
+/* SSC PDC Transmit Next Pointer Register */
+#define SSC_PDC_TNPR 0x00000118
+
+/* SSC PDC Transmit Next Counter Register */
+#define SSC_PDC_TNCR 0x0000011c
+
+/* SSC PDC Transfer Control Register */
+#define SSC_PDC_PTCR 0x00000120
+#define SSC_PDC_PTCR_RXTDIS_SIZE 1
+#define SSC_PDC_PTCR_RXTDIS_OFFSET 1
+#define SSC_PDC_PTCR_RXTEN_SIZE 1
+#define SSC_PDC_PTCR_RXTEN_OFFSET 0
+#define SSC_PDC_PTCR_TXTDIS_SIZE 1
+#define SSC_PDC_PTCR_TXTDIS_OFFSET 9
+#define SSC_PDC_PTCR_TXTEN_SIZE 1
+#define SSC_PDC_PTCR_TXTEN_OFFSET 8
+
+/* SSC PDC Transfer Status Register */
+#define SSC_PDC_PTSR 0x00000124
+#define SSC_PDC_PTSR_RXTEN_SIZE 1
+#define SSC_PDC_PTSR_RXTEN_OFFSET 0
+#define SSC_PDC_PTSR_TXTEN_SIZE 1
+#define SSC_PDC_PTSR_TXTEN_OFFSET 8
+
+/* Bit manipulation macros */
+#define SSC_BIT(name) \
+ (1 << SSC_##name##_OFFSET)
+#define SSC_BF(name, value) \
+ (((value) & ((1 << SSC_##name##_SIZE) - 1)) \
+ << SSC_##name##_OFFSET)
+#define SSC_BFEXT(name, value) \
+ (((value) >> SSC_##name##_OFFSET) \
+ & ((1 << SSC_##name##_SIZE) - 1))
+#define SSC_BFINS(name, value, old) \
+ (((old) & ~(((1 << SSC_##name##_SIZE) - 1) \
+ << SSC_##name##_OFFSET)) | SSC_BF(name, value))
+
+/* Register access macros */
+#define ssc_readl(base, reg) __raw_readl(base + SSC_##reg)
+#define ssc_writel(base, reg, value) __raw_writel((value), base + SSC_##reg)
+
+#endif /* __INCLUDE_ATMEL_SSC_H */