[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfrom

No longer maintained

11 files changed, 2 insertions, 1407 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6b12d71978d..296bc03d1cf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -704,8 +704,7 @@ source "drivers/acorn/block/Kconfig"
 
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
-	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
-	|| MACH_MP1000
+	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
 source "drivers/ide/Kconfig"
 endif
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index a54d2eb6489..7c7f475e213 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -39,8 +39,7 @@
     defined(CONFIG_ARCH_IXP4XX) || \
     defined(CONFIG_ARCH_IXP2000) || \
     defined(CONFIG_ARCH_LH7A40X) || \
-    defined(CONFIG_ARCH_OMAP) || \
-    defined(CONFIG_MACH_MP1000)
+    defined(CONFIG_ARCH_OMAP)
 		.macro	loadsp,	rb
 		addruart \rb
 		.endm
diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig
deleted file mode 100644
index d2cbc6fada1..00000000000
--- a/arch/arm/configs/mp1000_defconfig
+++ /dev/null
@@ -1,897 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Fri Sep 16 15:48:13 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-CONFIG_MACH_MP1000=y
-CONFIG_MP1000_90MHZ=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=m
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_EDB7312=m
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_MP1000=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-CONFIG_IDE_ARM=y
-CONFIG_BLK_DEV_IDE_MP1000=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_CS89x0=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CLPS711X=y
-CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_WAITQ=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_CLPS711X_UART2 is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index d5c15504576..0793dcf54f2 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -69,17 +69,6 @@ config EP72XX_ROM_BOOT
 
 	  You almost surely want to say N here.
 
-config MACH_MP1000
-	bool "MACH_MP1000"
-	help
-	  Say Y if you intend to run the kernel on the Comdial MP1000 platform.
-
-config MP1000_90MHZ
-	bool "MP1000_90MHZ"
-	depends on MACH_MP1000
-	help
-	  Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 8a6dc1ccf8f..4a197315f0c 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
 obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
-obj-$(CONFIG_MACH_MP1000)   += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
 obj-$(CONFIG_ARCH_P720T)    += p720t.o
 leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
 obj-$(CONFIG_LEDS)          += $(leds-y)
diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c
deleted file mode 100644
index c2816bcde5e..00000000000
--- a/arch/arm/mach-clps711x/mp1000-mach.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/arch/arm/mach-mp1000/mp1000.c
- *
- *  Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/arch/mp1000-seprom.h>
-
-#include "common.h"
-
-extern void mp1000_map_io(void);
-
-static void __init mp1000_init(void)
-{
-    seprom_init();
-}
-
-MACHINE_START(MP1000, "Comdial MP1000")
-	/* Maintainer: Jon Ringle */
-	.phys_ram	= 0xc0000000,
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
-	.boot_params	= 0xc0015100,
-	.map_io		= mp1000_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_machine	= mp1000_init,
-	.timer		= &clps711x_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c
deleted file mode 100644
index 20e810b0ec0..00000000000
--- a/arch/arm/mach-clps711x/mp1000-mm.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  linux/arch/arm/mach-mp1000/mm.c
- *
- *  Extra MM routines for the MP1000
- *
- *  Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/hardware.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/map.h>
-
-extern void clps711x_map_io(void);
-
-static struct map_desc mp1000_io_desc[] __initdata = {
-    { MP1000_EIO_BASE,	MP1000_EIO_START,	MP1000_EIO_SIZE, MT_DEVICE },
-    { MP1000_FIO_BASE,	MP1000_FIO_START,	MP1000_FIO_SIZE, MT_DEVICE },
-    { MP1000_LIO_BASE,	MP1000_LIO_START,	MP1000_LIO_SIZE, MT_DEVICE },
-    { MP1000_NIO_BASE,	MP1000_NIO_START,	MP1000_NIO_SIZE, MT_DEVICE },
-    { MP1000_IDE_BASE,	MP1000_IDE_START,	MP1000_IDE_SIZE, MT_DEVICE },
-    { MP1000_DSP_BASE,	MP1000_DSP_START,	MP1000_DSP_SIZE, MT_DEVICE }
-};
-
-void __init mp1000_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
-}
diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c
deleted file mode 100644
index b22d0bebb85..00000000000
--- a/arch/arm/mach-clps711x/mp1000-seprom.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*`
- * mp1000-seprom.c
- *
- *  This file contains the Serial EEPROM code for the MP1000 board
- *
- *  Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/arch/mp1000-seprom.h>
-
-/* If SepromInit() can initialize and checksum the seprom successfully, */
-/* then it will point seprom_data_ptr at the shadow copy.  */
-
-static eeprom_struct seprom_data;			/* shadow copy of seprom content */
-
-eeprom_struct *seprom_data_ptr = 0;		/* 0 => not initialized */
-
-/*
- * Port D Bit 5 is Chip Select for EEPROM
- * Port E Bit 0 is Input, Data out from EEPROM
- * Port E Bit 1 is Output, Data in to EEPROM
- * Port E Bit 2 is Output, CLK to EEPROM
- */
-
-static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
-static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
-
-#define NO_OF_SHORTS	64	// Device is 64 x 16 bits
-#define ENABLE_RW	0
-#define DISABLE_RW	1
-
-static inline void toggle_seprom_clock(void)
-{
-	*port_e_ptr |= HwPortESepromCLK;
-	*port_e_ptr &= ~(HwPortESepromCLK);
-}
-
-static inline void select_eeprom(void)
-{
-	*port_d_ptr |= HwPortDEECS;
-	*port_e_ptr &= ~(HwPortESepromCLK);
-}
-
-static inline void deselect_eeprom(void)
-{
-	*port_d_ptr &= ~(HwPortDEECS);
-	*port_e_ptr &= ~(HwPortESepromDIn);
-}
-
-/*
- * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
- *                    and returns 0 if seprom is not initialized or
- *                    has a checksum error.
- */
-
-eeprom_struct* get_seprom_ptr(void)
-{
-	return seprom_data_ptr;
-}
-
-unsigned char* get_eeprom_mac_address(void)
-{
-	return seprom_data_ptr->variant.eprom_struct.mac_Address;
-}
-
-/*
- * ReadSProm, Physically reads data from the Serial PROM
- */
-static void read_sprom(short address, int length, eeprom_struct *buffer)
-{
-	short data = COMMAND_READ | (address & 0x3F);
-	short bit;
-	int i;
-
-	select_eeprom();
-
-	// Clock in 9 bits of the command
-	for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
-		if (data & bit)
-			*port_e_ptr |= HwPortESepromDIn;
-		else
-			*port_e_ptr &= ~(HwPortESepromDIn);
-
-		toggle_seprom_clock();
-	}
-
-	//
-	// Now read one or more shorts of data from the Seprom
-	//
-	while (length-- > 0) {
-		data = 0;
-
-		// Read 16 bits at a time
-		for (i = 0; i < 16; i++) {
-			data <<= 1;
-			toggle_seprom_clock();
-			data |= *port_e_ptr & HwPortESepromDOut;
-
-		}
-
-		buffer->variant.eprom_short_data[address++] = data;
-	}
-
-	deselect_eeprom();
-
-	return;
-}
-
-
-
-/*
- * ReadSerialPROM
- *
- * Input: Pointer to array of 64 x 16 Bits
- *
- * Output: if no problem reading data is filled in
- */
-static void read_serial_prom(eeprom_struct *data)
-{
-	read_sprom(0, 64, data);
-}
-
-
-//
-// Compute Serial EEPROM checksum
-//
-// Input: Pointer to struct with Eprom data
-//
-// Output: The computed Eprom checksum
-//
-static short compute_seprom_checksum(eeprom_struct *data)
-{
-	short checksum = 0;
-	int i;
-
-	for (i = 0; i < 126; i++) {
-		checksum += (short)data->variant.eprom_byte_data[i];
-	}
-
-	return((short)(0x5555 - (checksum & 0xFFFF)));
-}
-
-//
-// Make sure the data port bits for the SEPROM are correctly initialised
-//
-
-void __init seprom_init(void)
-{
-	short checksum;
-
-	// Init Port D
-	*(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
-	*(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
-
-	// Init Port E
-	*(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
-	*(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
-
-	//
-	// Make sure that EEPROM struct size never exceeds 128 bytes
-	//
-	if (sizeof(eeprom_struct) > 128) {
-		panic("Serial PROM struct size > 128, aborting read\n");
-	}
-
-	read_serial_prom(&seprom_data);
-
-	checksum = compute_seprom_checksum(&seprom_data);
-
-	if (checksum != seprom_data.variant.eprom_short_data[63]) {
-		panic("Serial EEPROM checksum failed\n");
-	}
-
-	seprom_data_ptr = &seprom_data;
-}
-
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 6a67e8f585b..87ef368384f 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -408,11 +408,7 @@ static struct uart_port clps711x_ports[UART_NR] = {
 	{
 		.iobase		= SYSCON1,
 		.irq		= IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
-#ifdef CONFIG_MP1000_90MHZ
-		.uartclk	= 4515840,
-#else
 		.uartclk	= 3686400,
-#endif
 		.fifosize	= 16,
 		.ops		= &clps711x_pops,
 		.line		= 0,
@@ -421,11 +417,7 @@ static struct uart_port clps711x_ports[UART_NR] = {
 	{
 		.iobase		= SYSCON2,
 		.irq		= IRQ_UTXINT2, /* IRQ_URXINT2 */
-#ifdef CONFIG_MP1000_90MHZ
-		.uartclk	= 4515840,
-#else
 		.uartclk	= 3686400,
-#endif
 		.fifosize	= 16,
 		.ops		= &clps711x_pops,
 		.line		= 1,
@@ -559,7 +551,6 @@ console_initcall(clps711xuart_console_init);
 static struct uart_driver clps711x_reg = {
 	.driver_name		= "ttyCL",
 	.dev_name		= "ttyCL",
-	.devfs_name		= "ttyCL",
 	.major			= SERIAL_CLPS711X_MAJOR,
 	.minor			= SERIAL_CLPS711X_MINOR,
 	.nr			= UART_NR,
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
index f864c367c93..1386871e1a5 100644
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ b/include/asm-arm/arch-clps711x/hardware.h
@@ -235,121 +235,4 @@
 #define CEIVA_PB0_BLK_BTN	(1<<0)
 #endif // #if defined (CONFIG_ARCH_CEIVA)
 
-#if defined (CONFIG_MACH_MP1000)
-/* NOR FLASH */
-#define MP1000_NIO_BASE		0xf9000000	/* virtual */
-#define MP1000_NIO_START	CS0_PHYS_BASE	/* physical */
-#define MP1000_NIO_SIZE		0x00400000
-
-/* DSP Interface */
-#define MP1000_DSP_BASE		0xfa000000	/* virtual */
-#define MP1000_DSP_START	CS1_PHYS_BASE	/* physical */
-#define MP1000_DSP_SIZE		0x00100000
-
-/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
-#define MP1000_LIO_BASE		0xfb000000	/* virtual */
-#define MP1000_LIO_START	CS2_PHYS_BASE	/* physical */
-#define MP1000_LIO_SIZE		0x00100000
-
-/* NAND FLASH */
-#define MP1000_FIO_BASE		0xfc000000	/* virtual */
-#define MP1000_FIO_START	CS3_PHYS_BASE	/* physical */
-#define MP1000_FIO_SIZE		0x00800000
-
-/* Ethernet */
-#define MP1000_EIO_BASE		0xfd000000	/* virtual 	*/
-#define MP1000_EIO_START	CS4_PHYS_BASE	/* physical 	*/
-#define MP1000_EIO_SIZE		0x00100000
-
-#define	MP1000_LCD_OFFSET	0x00000000	/* LCD offset in CS2 */
-#define	MP1000_DDD_OFFSET	0x00001000	/* DAA/DAI/DSP sft reset offst*/
-#define	MP1000_RTC_OFFSET	0x00002000	/* RTC offset in CS2 */
-#define	MP1000_DAA_OFFSET	0x00003000	/* DAA RW reg offset in CS2 */
-
-/* IDE */
-#define MP1000_IDE_BASE		0xfe000000      /* virtual */
-#define MP1000_IDE_START	CS5_PHYS_BASE      /* physical */
-#define MP1000_IDE_SIZE		0x00100000      /* actually it's only 0x1000 */
-
-#define IRQ_HARDDISK IRQ_EINT2
-
-/*
- * IDE registers definition
- */
-
-#define IDE_CONTROL_BASE		(MP1000_IDE_BASE + 0x1000)
-#define IDE_BASE_OFF			(MP1000_IDE_BASE)
-
-#define IDE_WRITE_DEVICE_DATA		(IDE_BASE_OFF + 0x0)
-#define IDE_FEATURES_REGISTER		(IDE_BASE_OFF + 0x2)
-#define IDE_SECTOR_COUNT_REGISTER	(IDE_BASE_OFF + 0x4)
-#define IDE_SECTOR_NUMBER_REGISTER	(IDE_BASE_OFF + 0x6)
-#define IDE_CYLINDER_LOW_REGISTER	(IDE_BASE_OFF + 0x8)
-#define IDE_CYLINDER_HIGH_REGISTER	(IDE_BASE_OFF + 0xa)
-#define IDE_DEVICE_HEAD_REGISTER	(IDE_BASE_OFF + 0xc)
-#define IDE_COMMAND_DATA_REGISTER	(IDE_BASE_OFF + 0xe)
-#define IDE_DEVICE_CONTROL_REGISTER	(IDE_CONTROL_BASE + 0xc)
-
-#define IDE_IRQ                      IRQ_EINT2
-
-
-#define RTC_PORT(x)	(MP1000_LIO_BASE+0x2000 + (x*2))
-#define RTC_ALWAYS_BCD	0
-
-/*
-// Definitions of the bit fields in the HwPortA register for the
-// MP1000 board.
-*/
-#define HwPortAKeyboardRow1                     0x00000001
-#define HwPortAKeyboardRow2                     0x00000002
-#define HwPortAKeyboardRow3                     0x00000004
-#define HwPortAKeyboardRow4                     0x00000008
-#define HwPortAKeyboardRow5                     0x00000010
-#define HwPortAKeyboardRow6                     0x00000020
-#define HwPortALCDEnable                        0x00000040
-#define HwPortAOffhook	                        0x00000080
-
-/*
-// Definitions of the bit fields in the HwPortB register for the
-// MP1000 board.
-*/
-#define HwPortBL3Mode                           0x00000001
-#define HwPortBL3Clk                            0x00000002
-#define HwPortBSClk                             0x00000001
-#define HwPortBSData                            0x00000002
-#define HwPortBL3Data                           0x00000004
-#define HwPortBMute                             0x00000008
-#define HwPortBQD0                              0x00000010
-#define HwPortBQD1                              0x00000020
-#define HwPortBQD2                              0x00000040
-#define HwPortBQD3                              0x00000080
-
-/*
-// Definitions of the bit fields in the HwPortD register for the
-// MP1000 board.
-*/
-#define HwPortDLED1                             0x00000001
-#define HwPortDLED2                             0x00000002
-#define HwPortDLED3                             0x00000004
-#define HwPortDLED4                             0x00000008
-#define HwPortDLED5                             0x00000010
-#define HwPortDEECS                             0x00000020
-#define HwPortBRTS                              0x00000040
-#define HwPortBRI                               0x00000080
-
-
-/*
-// Definitions of the bit fields in the HwPortE register for the
-// MP1000 board.
-*/
-
-#define HwPortECLE                              0x00000001
-#define HwPortESepromDOut                       0x00000001
-#define HwPortEALE                              0x00000002
-#define HwPortESepromDIn                        0x00000002
-#define HwPortENANDCS                           0x00000004
-#define HwPortESepromCLK                        0x00000004
-
-#endif // #if defined (CONFIG_MACH_MP1000)
-
 #endif
diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h
deleted file mode 100644
index 3e5566cf966..00000000000
--- a/include/asm-arm/arch-clps711x/mp1000-seprom.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef MP1000_SEPROM_H
-#define MP1000_SEPROM_H
-
-/*
- * mp1000-seprom.h
- *
- *
- *  This file contains the Serial EEPROM definitions for the MP1000 board
- *
- *  Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#define COMMAND_ERASE		(0x1C0)
-#define COMMAND_ERASE_ALL	(0x120)
-#define COMMAND_WRITE_DISABLE	(0x100)
-#define COMMAND_WRITE_ENABLE	(0x130)
-#define COMMAND_READ		(0x180)
-#define COMMAND_WRITE		(0x140)
-#define COMMAND_WRITE_ALL	(0x110)
-
-//
-// Serial EEPROM data format
-//
-
-#define PACKED __attribute__ ((packed))
-
-typedef struct _EEPROM {
-	union {
-		unsigned char eprom_byte_data[128];
-		unsigned short eprom_short_data[64];
-		struct {
-			unsigned char version PACKED;	// EEPROM Version "1" for now
-			unsigned char box_id PACKED; 	// Box ID (Standalone, SOHO, embedded, etc)
-			unsigned char major_hw_version PACKED;	// Major Hardware version (Hex)
-			unsigned char minor_hw_version PACKED;	// Minor Hardware Version (Hex)
-			unsigned char mfg_id[3] PACKED;	// Manufacturer ID (3 character Alphabetic)
-			unsigned char mfg_serial_number[10] PACKED;	// Manufacturer Serial number
-			unsigned char mfg_date[3] PACKED;	// Date of Mfg (Formatted YY:MM:DD)
-			unsigned char country PACKED;	// Country of deployment
-			unsigned char mac_Address[6] PACKED;	// MAC Address
-			unsigned char oem_string[20] PACKED;	// OEM ID string
-			unsigned short feature_bits1 PACKED;	// Feature Bits 1
-			unsigned short feature_bits2 PACKED;	// Feature Bits 2
-			unsigned char filler[75] PACKED;		// Unused/Undefined	“0” initialized
-			unsigned short checksum PACKED;		// byte accumulated short checksum
-		} eprom_struct;
-	} variant;
-}  eeprom_struct;
-
-/* These settings must be mutually exclusive */
-#define	FEATURE_BITS1_DRAMSIZE_16MEG	0x0001  /* 0 signifies 4 MEG system */
-#define	FEATURE_BITS1_DRAMSIZE_8MEG	0x0002  /* 1 in bit 1 = 8MEG system */
-#define	FEATURE_BITS1_DRAMSIZE_64MEG	0x0004  /* 1 in bit 2 = 64MEG system */
-
-#define FEATURE_BITS1_CPUIS90MEG     0x0010
-
-extern void seprom_init(void);
-extern eeprom_struct* get_seprom_ptr(void);
-extern unsigned char* get_eeprom_mac_address(void);
-
-#endif /* MP1000_SEPROM_H */
-