summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDmitry Baryshkov <dbaryshkov@gmail.com>2007-12-06 18:18:03 -0800
committerGreg Kroah-Hartman <gregkh@suse.de>2008-02-01 14:34:57 -0800
commitd4a8d46d9129fbb26b4c2d3143b1b0975a9b4ae4 (patch)
treec8f3df6259f2a2cbcffe559f29fc065c8adcc856
parent26e109b0a90b5ef7b025e44a969836ab9a598ffc (diff)
USB: gadget: pxa2xx_udc supports inverted vbus
Some boards (like e.g. Tosa) invert the VBUS-detection signal: it's low when a host is supplying VBUS, and high otherwise. Allow specifying whether gpio_vbus value is inverted. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c9
-rw-r--r--include/asm-arm/mach/udc_pxa2xx.h2
2 files changed, 9 insertions, 2 deletions
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 4abf9d26d61..8bd9ce26bd9 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -127,8 +127,10 @@ static int is_vbus_present(void)
{
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
- if (mach->gpio_vbus)
- return gpio_get_value(mach->gpio_vbus);
+ if (mach->gpio_vbus) {
+ int value = gpio_get_value(mach->gpio_vbus);
+ return mach->gpio_vbus_inverted ? !value : value;
+ }
if (mach->udc_is_connected)
return mach->udc_is_connected();
return 1;
@@ -1398,6 +1400,9 @@ static irqreturn_t udc_vbus_irq(int irq, void *_dev)
struct pxa2xx_udc *dev = _dev;
int vbus = gpio_get_value(dev->mach->gpio_vbus);
+ if (dev->mach->gpio_vbus_inverted)
+ vbus = !vbus;
+
pxa2xx_udc_vbus_session(&dev->gadget, vbus);
return IRQ_HANDLED;
}
diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
index ff0a95715a0..f191e147ea9 100644
--- a/include/asm-arm/mach/udc_pxa2xx.h
+++ b/include/asm-arm/mach/udc_pxa2xx.h
@@ -19,7 +19,9 @@ struct pxa2xx_udc_mach_info {
* with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
* VBUS IRQ and omit the methods above. Store the GPIO number
* here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
+ * Note that sometimes the signals go through inverters...
*/
+ bool gpio_vbus_inverted;
u16 gpio_vbus; /* high == vbus present */
u16 gpio_pullup; /* high == pullup activated */
};