summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAlan Cox <alan@linux.intel.com>2010-09-28 13:19:38 +0100
committerJeff Garzik <jgarzik@redhat.com>2010-10-21 20:21:05 -0400
commit60039a5295b3d82a48fe132c699987d2e1408675 (patch)
tree38009cc6be6c876dfa0cd1752bd4c82b7d5d0e96
parentb34e90429ce8a23546b6b927d4e151df4c113644 (diff)
ata: Intel IDE-R support
Intel IDE-R devices are part of the Intel AMT management setup. They don't have any special configuration registers or settings so the ata_generic driver will support them fully. Rather than add a huge table of IDs for each chipset and keep sending in new ones this patch autodetects them. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r--drivers/ata/ata_generic.c54
1 files changed, 53 insertions, 1 deletions
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index cc5f7726bde..6981f7680a0 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -35,6 +35,7 @@
enum {
ATA_GEN_CLASS_MATCH = (1 << 0),
ATA_GEN_FORCE_DMA = (1 << 1),
+ ATA_GEN_INTEL_IDER = (1 << 2),
};
/**
@@ -109,6 +110,49 @@ static struct ata_port_operations generic_port_ops = {
static int all_generic_ide; /* Set to claim all devices */
/**
+ * is_intel_ider - identify intel IDE-R devices
+ * @dev: PCI device
+ *
+ * Distinguish Intel IDE-R controller devices from other Intel IDE
+ * devices. IDE-R devices have no timing registers and are in
+ * most respects virtual. They should be driven by the ata_generic
+ * driver.
+ *
+ * IDE-R devices have PCI offset 0xF8.L as zero, later Intel ATA has
+ * it non zero. All Intel ATA has 0x40 writable (timing), but it is
+ * not writable on IDE-R devices (this is guaranteed).
+ */
+
+static int is_intel_ider(struct pci_dev *dev)
+{
+ /* For Intel IDE the value at 0xF8 is only zero on IDE-R
+ interfaces */
+ u32 r;
+ u16 t;
+
+ /* Check the manufacturing ID, it will be zero for IDE-R */
+ pci_read_config_dword(dev, 0xF8, &r);
+ /* Not IDE-R: punt so that ata_(old)piix gets it */
+ if (r != 0)
+ return 0;
+ /* 0xF8 will also be zero on some early Intel IDE devices
+ but they will have a sane timing register */
+ pci_read_config_word(dev, 0x40, &t);
+ if (t != 0)
+ return 0;
+ /* Finally check if the timing register is writable so that
+ we eliminate any early devices hot-docked in a docking
+ station */
+ pci_write_config_word(dev, 0x40, 1);
+ pci_read_config_word(dev, 0x40, &t);
+ if (t) {
+ pci_write_config_word(dev, 0x40, 0);
+ return 0;
+ }
+ return 1;
+}
+
+/**
* ata_generic_init - attach generic IDE
* @dev: PCI device found
* @id: match entry
@@ -134,6 +178,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0)
return -ENODEV;
+ if (id->driver_data & ATA_GEN_INTEL_IDER)
+ if (!is_intel_ider(dev))
+ return -ENODEV;
+
/* Devices that need care */
if (dev->vendor == PCI_VENDOR_ID_UMC &&
dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
@@ -186,7 +234,11 @@ static struct pci_device_id ata_generic[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), },
-#endif
+#endif
+ /* Intel, IDE class device */
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL,
+ .driver_data = ATA_GEN_INTEL_IDER },
/* Must come last. If you add entries adjust this table appropriately */
{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL),
.driver_data = ATA_GEN_CLASS_MATCH },