Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A first set of bug fixes that didn't make it for the merge window, and
  two Kconfig cleanups that still make sense at this point.

  Unfortunately, one of the two cleanups caused an unintended change in
  the original version, so we had to revert one part of it and do some
  more testing to ensure the rest is really fine.  There was also a
  last-minute rebase of the patches to remove another bad commit"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: use menuconfig for sub-arch menus
  ARM: multi_v7_defconfig: re-enable SDHCI drivers
  ARM: EXYNOS: Fix compilation warning
  ARM: exynos: move sysram info to exynos.c
  ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board
  ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board
  ARM: exynos: cleanup kconfig option display
  misc: vexpress: fix error handling vexpress_syscfg_regmap_init()
  ARM: Remove ARCH_HAS_CPUFREQ config option
  ARM: integrator: fix section mismatch problem
  ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size
  ARM: samsung: make SAMSUNG_DMADEV optional
  remoteproc: da8xx: don't select CMA on no-MMU
  bus/arm-cci: add dependency on OF && CPU_V7
  ARM: keystone requires ARM_PATCH_PHYS_VIRT
  ARM: omap2: fix am43xx dependency on l2x0 cache

44 files changed, 123 insertions, 158 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 87b63fde06d..245058b3b0e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -175,13 +175,6 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
-config ARCH_HAS_CPUFREQ
-	bool
-	help
-	  Internal node to signify that the ARCH has CPUFREQ support
-	  and that the relevant menu configurations are displayed for
-	  it.
-
 config ARCH_HAS_BANDGAP
 	bool
 
@@ -318,7 +311,6 @@ config ARCH_MULTIPLATFORM
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
-	select ARCH_HAS_CPUFREQ
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
@@ -538,7 +530,6 @@ config ARCH_DOVE
 
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
@@ -637,7 +628,6 @@ config ARCH_LPC32XX
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
-	select ARCH_HAS_CPUFREQ
 	select ARCH_MTD_XIP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
@@ -707,7 +697,6 @@ config ARCH_RPC
 
 config ARCH_SA1100
 	bool "SA1100-based"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_MTD_XIP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
@@ -725,7 +714,6 @@ config ARCH_SA1100
 
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ATAGS
 	select CLKDEV_LOOKUP
@@ -746,7 +734,6 @@ config ARCH_S3C24XX
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
@@ -809,7 +796,6 @@ config ARCH_S5PC100
 
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
 	select ATAGS
@@ -845,7 +831,6 @@ config ARCH_DAVINCI
 config ARCH_OMAP1
 	bool "TI OMAP1"
 	depends on MMU
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
@@ -1009,8 +994,6 @@ source "arch/arm/mach-rockchip/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
 
-source "arch/arm/plat-samsung/Kconfig"
-
 source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/mach-spear/Kconfig"
@@ -1028,6 +1011,7 @@ source "arch/arm/mach-s5pc100/Kconfig"
 source "arch/arm/mach-s5pv210/Kconfig"
 
 source "arch/arm/mach-exynos/Kconfig"
+source "arch/arm/plat-samsung/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 
@@ -2109,9 +2093,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if ARCH_HAS_CPUFREQ
 source "drivers/cpufreq/Kconfig"
-endif
 
 source "drivers/cpuidle/Kconfig"
 
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 772fec2d26c..1e2919d43d7 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -91,6 +91,8 @@
 				marvell,nand-keep-config;
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
 
 				partition@0 {
 					label = "U-Boot";
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index ff9637dd8d0..5bae4731828 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -98,6 +98,8 @@
 				marvell,nand-keep-config;
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
 
 				partition@0 {
 					label = "U-Boot";
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index e5c6a0492ca..4e5a59ee150 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -25,7 +25,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
 	};
 
 	soc {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e2d62048e19..17d9462b9fb 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -300,6 +300,7 @@ CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ARASAN=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_DOVE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 59066cf0271..536a137863c 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -32,6 +32,7 @@ CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
+CONFIG_CACHE_L2X0=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_SMP=y
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 9bc6db1c134..41c839167e8 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,10 +1,9 @@
-config ARCH_BCM
+menuconfig ARCH_BCM
 	bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
 	help
 	  This enables support for Broadcom ARM based SoC chips
 
-menu "Broadcom SoC Selection"
-	depends on ARCH_BCM
+if ARCH_BCM
 
 config ARCH_BCM_MOBILE
 	bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
@@ -88,4 +87,4 @@ config ARCH_BCM_5301X
 	  different SoC or with the older BCM47XX and BCM53XX based
 	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
 
-endmenu
+endif
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 101e0f35673..2631cfc5ab0 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_BERLIN
+menuconfig ARCH_BERLIN
 	bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
@@ -9,8 +9,6 @@ config ARCH_BERLIN
 
 if ARCH_BERLIN
 
-menu "Marvell Berlin SoC variants"
-
 config MACH_BERLIN_BG2
 	bool "Marvell Armada 1500 (BG2)"
 	select CACHE_L2X0
@@ -30,6 +28,4 @@ config MACH_BERLIN_BG2Q
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL_BERLIN_BG2Q
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 66838f42037..3c22a1990ec 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,12 +1,11 @@
-config ARCH_CNS3XXX
+menuconfig ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
 	select ARM_GIC
 	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
-menu "CNS3XXX platform type"
-	depends on ARCH_CNS3XXX
+if ARCH_CNS3XXX
 
 config MACH_CNS3420VB
 	bool "Support for CNS3420 Validation Board"
@@ -17,4 +16,4 @@ config MACH_CNS3420VB
 	  This is a platform with an on-board ARM11 MPCore and has support
 	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
 
-endmenu
+endif
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index db18ef86659..584e8d4e289 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
 	select ARCH_DAVINCI_DA8XX
-	select ARCH_HAS_CPUFREQ
 	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index d58995c9a95..8f9b66c4ac7 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,10 +7,9 @@
 
 # Configuration options for the EXYNOS4
 
-config ARCH_EXYNOS
+menuconfig ARCH_EXYNOS
 	bool "Samsung EXYNOS" if ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
@@ -30,8 +29,6 @@ config ARCH_EXYNOS
 
 if ARCH_EXYNOS
 
-menu "SAMSUNG EXYNOS SoCs Support"
-
 config ARCH_EXYNOS3
 	bool "SAMSUNG EXYNOS3"
 	select ARM_CPU_SUSPEND if PM
@@ -118,8 +115,6 @@ config SOC_EXYNOS5800
 	default y
 	depends on SOC_EXYNOS5420
 
-endmenu
-
 config EXYNOS5420_MCPM
 	bool "Exynos5420 Multi-Cluster PM support"
 	depends on MCPM && SOC_EXYNOS5420
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 16617bdb37a..1ee91763fa7 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -118,6 +118,7 @@ extern void __iomem *sysram_ns_base_addr;
 extern void __iomem *sysram_base_addr;
 void exynos_init_io(void);
 void exynos_restart(enum reboot_mode mode, const char *cmd);
+void exynos_sysram_init(void);
 void exynos_cpuidle_init(void);
 void exynos_cpufreq_init(void);
 void exynos_init_late(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 90aab4d75d0..f38cf7c110c 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -184,6 +184,28 @@ void __init exynos_cpufreq_init(void)
 	platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
 }
 
+void __iomem *sysram_base_addr;
+void __iomem *sysram_ns_base_addr;
+
+void __init exynos_sysram_init(void)
+{
+	struct device_node *node;
+
+	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+		if (!of_device_is_available(node))
+			continue;
+		sysram_base_addr = of_iomap(node, 0);
+		break;
+	}
+
+	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
+		if (!of_device_is_available(node))
+			continue;
+		sysram_ns_base_addr = of_iomap(node, 0);
+		break;
+	}
+}
+
 void __init exynos_init_late(void)
 {
 	if (of_machine_is_compatible("samsung,exynos5440"))
@@ -198,7 +220,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
 					int depth, void *data)
 {
 	struct map_desc iodesc;
-	__be32 *reg;
+	const __be32 *reg;
 	int len;
 
 	if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
@@ -271,6 +293,13 @@ static void __init exynos_dt_machine_init(void)
 		}
 	}
 
+	/*
+	 * This is called from smp_prepare_cpus if we've built for SMP, but
+	 * we still need to set it up for PM and firmware ops if not.
+	 */
+	if (!IS_ENABLED(SMP))
+		exynos_sysram_init();
+
 	exynos_cpuidle_init();
 	exynos_cpufreq_init();
 
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index ec02422e849..1c8d31e3952 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -32,28 +32,6 @@
 
 extern void exynos4_secondary_startup(void);
 
-void __iomem *sysram_base_addr;
-void __iomem *sysram_ns_base_addr;
-
-static void __init exynos_smp_prepare_sysram(void)
-{
-	struct device_node *node;
-
-	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
-		if (!of_device_is_available(node))
-			continue;
-		sysram_base_addr = of_iomap(node, 0);
-		break;
-	}
-
-	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
-		if (!of_device_is_available(node))
-			continue;
-		sysram_ns_base_addr = of_iomap(node, 0);
-		break;
-	}
-}
-
 static inline void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
@@ -234,11 +212,11 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
+	exynos_sysram_init();
+
 	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
 		scu_enable(scu_base_addr());
 
-	exynos_smp_prepare_sysram();
-
 	/*
 	 * Write the address of secondary startup into the
 	 * system-wide flags register. The boot monitor waits
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 830b76e7025..a5960e2ac09 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,7 +1,6 @@
 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
 	select ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8d42eab76d5..28fa2fa49e5 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,5 @@
-config ARCH_MXC
+menuconfig ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
@@ -13,8 +12,7 @@ config ARCH_MXC
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
-menu "Freescale i.MX support"
-	depends on ARCH_MXC
+if ARCH_MXC
 
 config MXC_TZIC
 	bool
@@ -99,7 +97,6 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
@@ -124,7 +121,6 @@ config SOC_IMX35
 
 config SOC_IMX5
 	bool
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_MXC_IOMUX_V3
 	select MXC_TZIC
@@ -786,4 +782,4 @@ endif
 
 source "arch/arm/mach-imx/devices/Kconfig"
 
-endmenu
+endif
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index ba43321001d..64f8e2564a3 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -28,7 +28,7 @@ config ARCH_CINTEGRATOR
 	bool
 
 config INTEGRATOR_IMPD1
-	tristate "Include support for Integrator/IM-PD1"
+	bool "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 0e870ea818c..3ce880729cf 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -308,7 +308,12 @@ static struct impd1_device impd1_devs[] = {
  */
 #define IMPD1_VALID_IRQS 0x00000bffU
 
-static int __init impd1_probe(struct lm_device *dev)
+/*
+ * As this module is bool, it is OK to have this as __init_refok() - no
+ * probe calls will be done after the initial system bootup, as devices
+ * are discovered as part of the machine startup.
+ */
+static int __init_refok impd1_probe(struct lm_device *dev)
 {
 	struct impd1_module *impd1;
 	int irq_base;
@@ -397,6 +402,11 @@ static void impd1_remove(struct lm_device *dev)
 static struct lm_driver impd1_driver = {
 	.drv = {
 		.name	= "impd1",
+		/*
+		 * As we're dropping the probe() function, suppress driver
+		 * binding from sysfs.
+		 */
+		.suppress_bind_attrs = true,
 	},
 	.probe		= impd1_probe,
 	.remove		= impd1_remove,
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index f50bc936cb8..98a156afaa9 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -1,6 +1,7 @@
 config ARCH_KEYSTONE
 	bool "Texas Instruments Keystone Devices"
 	depends on ARCH_MULTI_V7
+	depends on ARM_PATCH_PHYS_VIRT
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
 	select CLKSRC_MMIO
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 82a4ba8578a..f49328c39be 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MOXART
+menuconfig ARCH_MOXART
 	bool "MOXA ART SoC" if ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 6090b9eb00c..4a7c250c9a3 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_MVEBU
+menuconfig ARCH_MVEBU
 	bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
@@ -13,8 +13,6 @@ config ARCH_MVEBU
 
 if ARCH_MVEBU
 
-menu "Marvell EBU SoC variants"
-
 config MACH_MVEBU_V7
 	bool
 	select ARMADA_370_XP_TIMER
@@ -84,7 +82,6 @@ config MACH_DOVE
 
 config MACH_KIRKWOOD
 	bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select KIRKWOOD_CLK
@@ -97,6 +94,4 @@ config MACH_KIRKWOOD
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Kirkwood device tree.
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 486d301f43f..3c61096c862 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_NOMADIK
+menuconfig ARCH_NOMADIK
 	bool "ST-Ericsson Nomadik"
 	depends on ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
@@ -15,7 +15,6 @@ config ARCH_NOMADIK
 	  Support for the Nomadik platform by ST-Ericsson
 
 if ARCH_NOMADIK
-menu "Nomadik boards"
 
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
@@ -24,7 +23,6 @@ config MACH_NOMADIK_8815NHK
 	select I2C_ALGOBIT
 	select I2C_NOMADIK
 
-endmenu
 endif
 
 config NOMADIK_8815
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0ba482638eb..062505345c9 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,3 +1,6 @@
+menu "TI OMAP/AM/DM/DRA Family"
+	depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
+
 config ARCH_OMAP
 	bool
 
@@ -28,7 +31,6 @@ config ARCH_OMAP4
 	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_720789
 	select ARM_GIC
-	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select OMAP_INTERCONNECT
@@ -80,7 +82,6 @@ config SOC_DRA7XX
 config ARCH_OMAP2PLUS
 	bool
 	select ARCH_HAS_BANDGAP
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
@@ -343,3 +344,5 @@ config OMAP4_ERRATA_I688
 endmenu
 
 endif
+
+endmenu
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index ff029737c8f..a373d508799 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -91,7 +91,14 @@ extern void omap3_sync32k_timer_init(void);
 extern void omap3_secure_sync32k_timer_init(void);
 extern void omap3_gptimer_timer_init(void);
 extern void omap4_local_timer_init(void);
+#ifdef CONFIG_CACHE_L2X0
 int omap_l2_cache_init(void);
+#else
+static inline int omap_l2_cache_init(void)
+{
+	return 0;
+}
+#endif
 extern void omap5_realtime_timer_init(void);
 
 void omap2420_init_early(void);
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index e4e505f52ba..042f693ef42 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_SIRF
+menuconfig ARCH_SIRF
 	bool "CSR SiRF" if ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
@@ -11,7 +11,7 @@ config ARCH_SIRF
 
 if ARCH_SIRF
 
-menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
+comment "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
 
 config ARCH_ATLAS6
 	bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
@@ -37,8 +37,6 @@ config ARCH_MARCO
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
 
-endmenu
-
 config SIRF_IRQ
 	bool
 
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index fd2b99dceb8..ee5697ba05b 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_QCOM
+menuconfig ARCH_QCOM
 	bool "Qualcomm Support" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
@@ -11,8 +11,6 @@ config ARCH_QCOM
 
 if ARCH_QCOM
 
-menu "Qualcomm SoC Selection"
-
 config ARCH_MSM8X60
 	bool "Enable support for MSM8X60"
 	select CLKSRC_QCOM
@@ -25,8 +23,6 @@ config ARCH_MSM8974
 	bool "Enable support for MSM8974"
 	select HAVE_ARM_ARCH_TIMER
 
-endmenu
-
 config QCOM_SCM
 	bool
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 04284de7aca..ad5316ae524 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -117,7 +117,7 @@ config S3C24XX_SETUP_TS
 	  Compile in platform device definition for Samsung TouchScreen.
 
 config S3C24XX_DMA
-	bool "S3C2410 DMA support"
+	bool "S3C2410 DMA support (deprecated)"
 	select S3C_DMA
 	help
 	  S3C2410 DMA support. This is needed for drivers like sound which
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 3136d86b0d6..26ca2427e53 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -18,9 +18,9 @@ config CPU_S3C6410
 	  Enable S3C6410 CPU support
 
 config S3C64XX_PL080
-	bool "S3C64XX DMA using generic PL08x driver"
+	def_bool DMADEVICES
+	select ARM_AMBA
 	select AMBA_PL08X
-	select SAMSUNG_DMADEV
 
 config S3C64XX_SETUP_SDHCI
 	bool
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index bb2111b3751..26003e23796 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,16 +9,18 @@ if ARCH_S5P64X0
 
 config CPU_S5P6440
 	bool
+	select ARM_AMBA
+	select PL330_DMA if DMADEVICES
 	select S5P_SLEEP if PM
-	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
+	select ARM_AMBA
+	select PL330_DMA if DMADEVICES
 	select S5P_SLEEP if PM
-	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6450 CPU support
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 15170be97a7..c5e3a969b06 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -9,8 +9,9 @@ if ARCH_S5PC100
 
 config CPU_S5PC100
 	bool
+	select ARM_AMBA
+	select PL330_DMA if DMADEVICES
 	select S5P_EXT_INT
-	select SAMSUNG_DMADEV
 	help
 	  Enable S5PC100 CPU support
 
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 8c3abe52175..f60f2862856 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,10 +11,11 @@ if ARCH_S5PV210
 
 config CPU_S5PV210
 	bool
+	select ARM_AMBA
+	select PL330_DMA if DMADEVICES
 	select S5P_EXT_INT
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
-	select SAMSUNG_DMADEV
 	help
 	  Enable S5PV210 CPU support
 
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index dbd954e61aa..798073057e5 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,7 +1,7 @@
 config ARCH_SHMOBILE
 	bool
 
-config ARCH_SHMOBILE_MULTI
+menuconfig ARCH_SHMOBILE_MULTI
 	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
 	depends on MMU
 	select ARCH_SHMOBILE
@@ -15,7 +15,7 @@ config ARCH_SHMOBILE_MULTI
 
 if ARCH_SHMOBILE_MULTI
 
-comment "Renesas ARM SoCs System Type"
+#comment "Renesas ARM SoCs System Type"
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
@@ -85,7 +85,6 @@ config ARCH_R8A73A4
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_IRQC
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
@@ -264,7 +263,6 @@ config MACH_KOELSCH
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 0786249b283..90df2022276 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -14,7 +14,6 @@ if PLAT_SPEAR
 config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx"
 	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
-	select ARCH_HAS_CPUFREQ
 	select ARM_GIC
 	select GPIO_SPEAR_SPICS
 	select HAVE_ARM_SCU if SMP
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index abf9ee9bbc3..7e33e9d2c42 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,5 +1,5 @@
 menuconfig ARCH_STI
-	bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
+	bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select PINCTRL
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index e16999e5b73..095399618ca 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,6 +1,5 @@
-config ARCH_TEGRA
+menuconfig ARCH_TEGRA
 	bool "NVIDIA Tegra" if ARCH_MULTI_V7
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_GIC
@@ -16,8 +15,7 @@ config ARCH_TEGRA
 	help
 	  This enables support for NVIDIA Tegra based systems.
 
-menu "NVIDIA Tegra options"
-	depends on ARCH_TEGRA
+if ARCH_TEGRA
 
 config ARCH_TEGRA_2x_SOC
 	bool "Enable support for Tegra20 family"
@@ -69,4 +67,4 @@ config TEGRA_AHB
 	  which controls AHB bus master arbitration and some
 	  performance parameters(priority, prefech size).
 
-endmenu
+endif
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index e3a96d7302e..bc51a71394a 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_U300
+menuconfig ARCH_U300
 	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
@@ -16,8 +16,6 @@ config ARCH_U300
 
 if ARCH_U300
 
-menu "ST-Ericsson AB U300/U335 Platform"
-
 config MACH_U300
 	depends on ARCH_U300
 	bool "U300"
@@ -43,6 +41,4 @@ config MACH_U300_SPIDUMMY
 		you don't need it. Selecting this will activate the
 		SPI framework and ARM PL022 support.
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index b41a42da150..5be7c4583a9 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,9 +1,8 @@
-config ARCH_U8500
+menuconfig ARCH_U8500
 	bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
 	depends on MMU
 	select AB8500_CORE
 	select ABX500_CORE
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_754322
@@ -34,8 +33,6 @@ config UX500_SOC_DB8500
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 
-menu "Ux500 target platform (boards)"
-
 config MACH_MOP500
 	bool "U8500 Development platform, MOP500 versions"
 	select I2C
@@ -68,8 +65,6 @@ config UX500_AUTO_PLATFORM
 	  a working kernel. If everything else is disabled, this
 	  automatically enables MACH_MOP500.
 
-endmenu
-
 config UX500_DEBUG_UART
 	int "Ux500 UART to use for low-level debug"
 	default 2
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 90249cfc37b..99c1f151c40 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_VEXPRESS
+menuconfig ARCH_VEXPRESS
 	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
@@ -37,8 +37,7 @@ config ARCH_VEXPRESS
 	  platforms. The traditional (ATAGs) boot method is not usable on
 	  these boards with this option.
 
-menu "Versatile Express platform type"
-	depends on ARCH_VEXPRESS
+if ARCH_VEXPRESS
 
 config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
 	bool "Enable A5 and A9 only errata work-arounds"
@@ -65,7 +64,6 @@ config ARCH_VEXPRESS_DCSCB
 
 config ARCH_VEXPRESS_SPC
 	bool "Versatile Express Serial Power Controller (SPC)"
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select PM_OPP
 	help
@@ -83,4 +81,4 @@ config ARCH_VEXPRESS_TC2_PM
 	  Support for CPU and cluster power management on Versatile Express
 	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
 
-endmenu
+endif
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 08f56a41cb5..aaaa24fe4d7 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -1,6 +1,5 @@
 config ARCH_VT8500
 	bool
-	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select VT8500_TIMER
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 573e0db1d0f..0c164f81e72 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,6 +1,5 @@
 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
-	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 243dfcb2ca0..301b892d97d 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -35,27 +35,15 @@ config SAMSUNG_PM
 	  Base platform power management code for samsung code
 
 if PLAT_SAMSUNG
+menu "Samsung Common options"
 
 # boot configurations
 
 comment "Boot options"
 
-config S3C_BOOT_ERROR_RESET
-	bool "S3C Reboot on decompression error"
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
-       bool "Force UART FIFO on during boot process"
-       default y
-       help
-         Say Y here to force the UART FIFOs on during the kernel
-	 uncompressor
-
-
 config S3C_LOWLEVEL_UART_PORT
 	int "S3C UART to use for low-level messages"
+	depends on ARCH_S3C64XX
 	default 0
 	help
 	  Choice of which UART port to use for the low-level messages,
@@ -407,17 +395,16 @@ config SAMSUNG_PM_GPIO
 	  Include legacy GPIO power management code for platforms not using
 	  pinctrl-samsung driver.
 
-endif
-
 config SAMSUNG_DMADEV
-	bool
-	select ARM_AMBA
+	bool "Use legacy Samsung DMA abstraction"
+	depends on CPU_S5PV210 || CPU_S5PC100 || ARCH_S5P64X0 || ARCH_S3C64XX
 	select DMADEVICES
-	select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
-					CPU_S5P6450 || CPU_S5P6440)
+	default y
 	help
 	  Use DMA device engine for PL330 DMAC.
 
+endif
+
 config S5P_DEV_MFC
 	bool
 	help
@@ -503,4 +490,5 @@ config DEBUG_S3C_UART
 	default "2" if DEBUG_S3C_UART2
 	default "3" if DEBUG_S3C_UART3
 
+endmenu
 endif
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index a118ec1650f..1f37d9870e7 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -45,7 +45,7 @@ config OMAP_INTERCONNECT
 
 config ARM_CCI
 	bool "ARM CCI driver support"
-	depends on ARM
+	depends on ARM && OF && CPU_V7
 	help
 	  Driver supporting the CCI cache coherent interconnect for ARM
 	  platforms.
diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
index 73068e50e56..3250fc1df0a 100644
--- a/drivers/misc/vexpress-syscfg.c
+++ b/drivers/misc/vexpress-syscfg.c
@@ -199,7 +199,7 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
 	func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
 			GFP_KERNEL);
 	if (!func)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	func->syscfg = syscfg;
 	func->num_templates = num;
@@ -231,10 +231,14 @@ static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
 	func->regmap = regmap_init(dev, NULL, func,
 			&vexpress_syscfg_regmap_config);
 
-	if (IS_ERR(func->regmap))
+	if (IS_ERR(func->regmap)) {
+		void *err = func->regmap;
+
 		kfree(func);
-	else
-		list_add(&func->list, &syscfg->funcs);
+		return err;
+	}
+
+	list_add(&func->list, &syscfg->funcs);
 
 	return func->regmap;
 }
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index ce1743d0b67..5e343bab945 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -44,7 +44,7 @@ config STE_MODEM_RPROC
 config DA8XX_REMOTEPROC
 	tristate "DA8xx/OMAP-L13x remoteproc support"
 	depends on ARCH_DAVINCI_DA8XX
-	select CMA
+	select CMA if MMU
 	select REMOTEPROC
 	select RPMSG
 	help