Merge tag 'tty-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg Kroah-Hartman:
 "Here are some small bugfixes, and one revert, of serial driver issues
  that have been reported"

* tag 'tty-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly"
  serial: samsung: enable clock before clearing pending interrupts during init
  serial/imx: disable hardware flow control at startup

3 files changed, 22 insertions, 7 deletions

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 46528d57be7..86c00b1c558 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2755,7 +2755,7 @@ static void __init serial8250_isa_init_ports(void)
 	if (nr_uarts > UART_NR)
 		nr_uarts = UART_NR;
 
-	for (i = 0; i < UART_NR; i++) {
+	for (i = 0; i < nr_uarts; i++) {
 		struct uart_8250_port *up = &serial8250_ports[i];
 		struct uart_port *port = &up->port;
 
@@ -2916,7 +2916,7 @@ static int __init serial8250_console_setup(struct console *co, char *options)
 	 * if so, search for the first available port that does have
 	 * console support.
 	 */
-	if (co->index >= UART_NR)
+	if (co->index >= nr_uarts)
 		co->index = 0;
 	port = &serial8250_ports[co->index].port;
 	if (!port->iobase && !port->membase)
@@ -2957,7 +2957,7 @@ int serial8250_find_port(struct uart_port *p)
 	int line;
 	struct uart_port *port;
 
-	for (line = 0; line < UART_NR; line++) {
+	for (line = 0; line < nr_uarts; line++) {
 		port = &serial8250_ports[line].port;
 		if (uart_match_port(p, port))
 			return line;
@@ -3110,7 +3110,7 @@ static int serial8250_remove(struct platform_device *dev)
 {
 	int i;
 
-	for (i = 0; i < UART_NR; i++) {
+	for (i = 0; i < nr_uarts; i++) {
 		struct uart_8250_port *up = &serial8250_ports[i];
 
 		if (up->port.dev == &dev->dev)
@@ -3178,7 +3178,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
 	/*
 	 * First, find a port entry which matches.
 	 */
-	for (i = 0; i < UART_NR; i++)
+	for (i = 0; i < nr_uarts; i++)
 		if (uart_match_port(&serial8250_ports[i].port, port))
 			return &serial8250_ports[i];
 
@@ -3187,7 +3187,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
 	 * free entry.  We look for one which hasn't been previously
 	 * used (indicated by zero iobase).
 	 */
-	for (i = 0; i < UART_NR; i++)
+	for (i = 0; i < nr_uarts; i++)
 		if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
 		    serial8250_ports[i].port.iobase == 0)
 			return &serial8250_ports[i];
@@ -3196,7 +3196,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
 	 * That also failed.  Last resort is to find any entry which
 	 * doesn't have a real port associated with it.
 	 */
-	for (i = 0; i < UART_NR; i++)
+	for (i = 0; i < nr_uarts; i++)
 		if (serial8250_ports[i].port.type == PORT_UNKNOWN)
 			return &serial8250_ports[i];
 
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 147c9e19359..8cdfbd36589 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -761,6 +761,8 @@ static int imx_startup(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR2);
 	temp |= (UCR2_RXEN | UCR2_TXEN);
+	if (!sport->have_rtscts)
+		temp |= UCR2_IRTS;
 	writel(temp, sport->port.membase + UCR2);
 
 	if (USE_IRDA(sport)) {
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 89429410a24..0c8a9fa2be6 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1166,6 +1166,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		ourport->tx_irq = ret;
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");
+	if (IS_ERR(ourport->clk)) {
+		pr_err("%s: Controller clock not found\n",
+				dev_name(&platdev->dev));
+		return PTR_ERR(ourport->clk);
+	}
+
+	ret = clk_prepare_enable(ourport->clk);
+	if (ret) {
+		pr_err("uart: clock failed to prepare+enable: %d\n", ret);
+		clk_put(ourport->clk);
+		return ret;
+	}
 
 	/* Keep all interrupts masked and cleared */
 	if (s3c24xx_serial_has_interrupt_mask(port)) {
@@ -1180,6 +1192,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	/* reset the fifos (and setup the uart) */
 	s3c24xx_serial_resetport(port, cfg);
+	clk_disable_unprepare(ourport->clk);
 	return 0;
 }