V4L/DVB (8530): au0828: add support for new revision of HVR950Q

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

5 files changed, 30 insertions, 0 deletions

diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index 86d1c8e7b18..eedc399e8de 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -2,3 +2,4 @@
   1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
+  4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index 52b2491581a..ed9a50f189f 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -6,6 +6,7 @@ config VIDEO_AU0828
 	select VIDEO_TVEEPROM
 	select DVB_AU8522 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Auvitek's USB device.
 
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 898e12395e7..443e5900976 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -32,6 +32,9 @@ struct au0828_board au0828_boards[] = {
 	[AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
 		.name	= "Hauppauge HVR950Q",
 	},
+	[AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
+		.name	= "Hauppauge HVR950Q rev xxF8",
+	},
 	[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 		.name	= "DViCO FusionHDTV USB",
 	},
@@ -49,6 +52,7 @@ int au0828_tuner_callback(void *priv, int command, int arg)
 	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 	case AU0828_BOARD_DVICO_FUSIONHDTV7:
 		if (command == 0) {
 			/* Tuner Reset Command from xc5000 */
@@ -110,6 +114,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 		if (dev->i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xa0);
 		break;
@@ -128,6 +133,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
 	switch (dev->board) {
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 		/* GPIO's
 		 * 4 - CS5340
 		 * 5 - AU8522 Demodulator
@@ -193,6 +199,12 @@ struct usb_device_id au0828_usb_id_table [] = {
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 	{ USB_DEVICE(0x0fd9, 0x0008),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x7201),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x7211),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x7281),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 	{ },
 };
 
diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h
index e26f54a961d..c37f5fd0fa8 100644
--- a/drivers/media/video/au0828/au0828-cards.h
+++ b/drivers/media/video/au0828/au0828-cards.h
@@ -23,3 +23,4 @@
 #define AU0828_BOARD_HAUPPAUGE_HVR950Q	1
 #define AU0828_BOARD_HAUPPAUGE_HVR850 	2
 #define AU0828_BOARD_DVICO_FUSIONHDTV7	3
+#define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL	4
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index c6d47059038..584a83a94a2 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -28,6 +28,7 @@
 #include "au0828.h"
 #include "au8522.h"
 #include "xc5000.h"
+#include "mxl5007t.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -45,6 +46,11 @@ static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
 	.tuner_callback   = au0828_tuner_callback
 };
 
+static struct mxl5007t_config mxl5007t_hvr950q_config = {
+	.xtal_freq_hz = MxL_XTAL_24_MHZ,
+	.if_freq_hz = MxL_IF_6_MHZ,
+};
+
 /*-------------------------------------------------------------------*/
 static void urb_completion(struct urb *purb)
 {
@@ -342,6 +348,15 @@ int au0828_dvb_register(struct au0828_dev *dev)
 				&dev->i2c_adap,
 				&hauppauge_hvr950q_tunerconfig, dev);
 		break;
+	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+		dvb->frontend = dvb_attach(au8522_attach,
+				&hauppauge_hvr950q_config,
+				&dev->i2c_adap);
+		if (dvb->frontend != NULL)
+			dvb_attach(mxl5007t_attach, dvb->frontend,
+				   &dev->i2c_adap, 0x60,
+				   &mxl5007t_hvr950q_config);
+		break;
 	default:
 		printk(KERN_WARNING "The frontend of your DVB/ATSC card "
 		       "isn't supported yet\n");