Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Add an interface to lock/unlock an I2C bus segment
  i2c-piix4: Modify code name SB900 to Hudson-2

6 files changed, 27 insertions, 9 deletions

diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index c5b37c57055..ac540c71c7e 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD SB900
+  * AMD Hudson-2
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 737335ff2b2..e8fe7f169e2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -128,7 +128,7 @@ config I2C_PIIX4
 	    ATI SB600
 	    ATI SB700
 	    ATI SB800
-	    AMD SB900
+	    AMD Hudson-2
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index d26a972aaca..1e245e9cad3 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
 	Intel PIIX4, 440MX
 	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 	ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
-	AMD SB900
+	AMD Hudson-2
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -233,9 +233,9 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	unsigned short smba_idx = 0xcd6;
 	u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
 
-	/* SB800 SMBus does not support forcing address */
+	/* SB800 and later SMBus does not support forcing address */
 	if (force || force_addr) {
-		dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support "
+		dev_err(&PIIX4_dev->dev, "SMBus does not support "
 			"forcing address!\n");
 		return -EINVAL;
 	}
@@ -480,7 +480,7 @@ static struct pci_device_id piix4_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index cee00ad49b5..49eb91b5f50 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx)
 	efx_oword_t reg;
 
 	/* GPIO 3 and the GPIO register are shared with I2C, so block that */
-	mutex_lock(&efx->i2c_adap.bus_lock);
+	i2c_lock_adapter(&efx->i2c_adap);
 
 	/* Pull RST_N (GPIO 2) low then let it up again, setting the
 	 * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
@@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx)
 	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
 	msleep(1);
 
-	mutex_unlock(&efx->i2c_adap.bus_lock);
+	i2c_unlock_adapter(&efx->i2c_adap);
 
 	ssleep(1);
 	return 0;
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 57d41b0abce..7b40cda57a7 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -361,6 +361,24 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
 	dev_set_drvdata(&dev->dev, data);
 }
 
+/**
+ * i2c_lock_adapter - Prevent access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static inline void i2c_lock_adapter(struct i2c_adapter *adapter)
+{
+	mutex_lock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_unlock_adapter - Reauthorize access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static inline void i2c_unlock_adapter(struct i2c_adapter *adapter)
+{
+	mutex_unlock(&adapter->bus_lock);
+}
+
 /*flags for the client struct: */
 #define I2C_CLIENT_PEC	0x04		/* Use Packet Error Checking */
 #define I2C_CLIENT_TEN	0x10		/* we have a ten bit chip address */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index b0f0f3851cd..9ceb392cb98 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -543,7 +543,7 @@
 #define PCI_DEVICE_ID_AMD_8131_BRIDGE	0x7450
 #define PCI_DEVICE_ID_AMD_8131_APIC	0x7451
 #define PCI_DEVICE_ID_AMD_8132_BRIDGE	0x7458
-#define PCI_DEVICE_ID_AMD_SB900_SMBUS	0x780b
+#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS	0x780b
 #define PCI_DEVICE_ID_AMD_CS5535_IDE    0x208F
 #define PCI_DEVICE_ID_AMD_CS5536_ISA    0x2090
 #define PCI_DEVICE_ID_AMD_CS5536_FLASH  0x2091