Merge master.kernel.org:/home/rmk/linux-2.6-serial

30 files changed, 82 insertions, 572 deletions

diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index e9c0178cd20..ac7eabbf662 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -107,8 +107,8 @@ hardware.
 	indicate that the signal is permanently active.  If RI is
 	not available, the signal should not be indicated as active.
 
-	Locking: none.
-	Interrupts: caller dependent.
+	Locking: port->lock taken.
+	Interrupts: locally disabled.
 	This call must not sleep
 
   stop_tx(port,tty_stop)
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 872085dea8a..6efaa9293ee 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -506,7 +506,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index d28ebfa1070..30fc03ed0cf 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -662,7 +662,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 1700d7aec68..46c9511f322 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -514,7 +514,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index b27980161c3..67aca6ccc9b 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -661,7 +661,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index ebd6301aa59..fdae21c503d 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -517,7 +517,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=13
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 34e75bc8f4c..9224fc3184e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -105,7 +105,7 @@ static struct old_serial_port old_serial_port[] = {
 	SERIAL_PORT_DFNS /* defined in asm/serial.h */
 };
 
-#define UART_NR	(ARRAY_SIZE(old_serial_port) + CONFIG_SERIAL_8250_NR_UARTS)
+#define UART_NR	CONFIG_SERIAL_8250_NR_UARTS
 
 #ifdef CONFIG_SERIAL_8250_RSA
 
@@ -993,21 +993,24 @@ static void autoconfig_irq(struct uart_8250_port *up)
 	up->port.irq = (irq > 0) ? irq : 0;
 }
 
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+	if (p->ier & UART_IER_THRI) {
+		p->ier &= ~UART_IER_THRI;
+		serial_out(p, UART_IER, p->ier);
+	}
+}
+
 static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 
-	if (up->ier & UART_IER_THRI) {
-		up->ier &= ~UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
+	__stop_tx(up);
 
 	/*
-	 * We only do this from uart_stop - if we run out of
-	 * characters to send, we don't want to prevent the
-	 * FIFO from emptying.
+	 * We really want to stop the transmitter from sending.
 	 */
-	if (up->port.type == PORT_16C950 && tty_stop) {
+	if (up->port.type == PORT_16C950) {
 		up->acr |= UART_ACR_TXDIS;
 		serial_icr_write(up, UART_ACR, up->acr);
 	}
@@ -1031,10 +1034,11 @@ static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start)
 				transmit_chars(up);
 		}
 	}
+
 	/*
-	 * We only do this from uart_start
+	 * Re-enable the transmitter if we disabled it.
 	 */
-	if (tty_start && up->port.type == PORT_16C950) {
+	if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
 		up->acr &= ~UART_ACR_TXDIS;
 		serial_icr_write(up, UART_ACR, up->acr);
 	}
@@ -1155,7 +1159,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up)
 		return;
 	}
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-		serial8250_stop_tx(&up->port, 0);
+		__stop_tx(up);
 		return;
 	}
 
@@ -1174,7 +1178,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up)
 	DEBUG_INTR("THRE...");
 
 	if (uart_circ_empty(xmit))
-		serial8250_stop_tx(&up->port, 0);
+		__stop_tx(up);
 }
 
 static _INLINE_ void check_modem_status(struct uart_8250_port *up)
@@ -1376,13 +1380,10 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
-	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	status = serial_in(up, UART_MSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e879bce160d..e0d0a470ddf 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -86,7 +86,7 @@ config SERIAL_8250_ACPI
 	  namespace, say Y here.  If unsure, say N.
 
 config SERIAL_8250_NR_UARTS
-	int "Maximum number of non-legacy 8250/16550 serial ports"
+	int "Maximum number of 8250/16550 serial ports"
 	depends on SERIAL_8250
 	default "4"
 	help
diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c
index 5400dc2c087..6104aeef124 100644
--- a/drivers/serial/au1x00_uart.c
+++ b/drivers/serial/au1x00_uart.c
@@ -556,13 +556,10 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
-	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	status = serial_in(up, UART_MSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 3ea46c069f6..ea5bf4d4daa 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -518,27 +518,28 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id, struct pt_regs *re
 static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port)
 {
 	struct zilog_channel *channel;
-	unsigned long flags;
 	unsigned char status;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	channel = ZILOG_CHANNEL_FROM_PORT(port);
 	status = readb(&channel->control);
 	ZSDELAY();
 
-	spin_unlock_irqrestore(&port->lock, flags);
-
 	return status;
 }
 
 /* The port lock is not held.  */
 static unsigned int ip22zilog_tx_empty(struct uart_port *port)
 {
+	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	status = ip22zilog_read_channel_status(port);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	if (status & Tx_BUF_EMP)
 		ret = TIOCSER_TEMT;
 	else
@@ -547,7 +548,7 @@ static unsigned int ip22zilog_tx_empty(struct uart_port *port)
 	return ret;
 }
 
-/* The port lock is not held.  */
+/* The port lock is held and interrupts are disabled.  */
 static unsigned int ip22zilog_get_mctrl(struct uart_port *port)
 {
 	unsigned char status;
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index a2a64331800..e43276c6a95 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -1058,12 +1058,9 @@ mpsc_get_mctrl(struct uart_port *port)
 {
 	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
 	u32 mflags, status;
-	ulong iflags;
 
-	spin_lock_irqsave(&pi->port.lock, iflags);
 	status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m :
 		readl(pi->mpsc_base + MPSC_CHR_10);
-	spin_unlock_irqrestore(&pi->port.lock, iflags);
 
 	mflags = 0;
 	if (status & 0x1)
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 85abd8a045e..1c9f7161712 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -604,7 +604,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
 /* 
  * Get Modem Control bits (only the input ones, the core will
  * or that with a cached value of the control ones)
- * The port lock is not held.
+ * The port lock is held and interrupts are disabled.
  */
 static unsigned int pmz_get_mctrl(struct uart_port *port)
 {
@@ -615,7 +615,7 @@ static unsigned int pmz_get_mctrl(struct uart_port *port)
 	if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
 		return 0;
 
-	status = pmz_peek_status(to_pmz(port));
+	status = read_zsreg(uap, R0);
 
 	ret = 0;
 	if (status & DCD)
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 08b08d6ae90..461c81c9320 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -274,14 +274,11 @@ static unsigned int serial_pxa_tx_empty(struct uart_port *port)
 static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
 {
 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-	spin_lock_irqsave(&up->port.lock, flags);
 	status = serial_in(up, UART_MSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 36b1ae083fb..139863a787f 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -182,6 +182,13 @@ static int uart_startup(struct uart_state *state, int init_hw)
 				uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
 		}
 
+		if (info->flags & UIF_CTS_FLOW) {
+			spin_lock_irq(&port->lock);
+			if (!(port->ops->get_mctrl(port) & TIOCM_CTS))
+				info->tty->hw_stopped = 1;
+			spin_unlock_irq(&port->lock);
+		}
+
 		info->flags |= UIF_INITIALIZED;
 
 		clear_bit(TTY_IO_ERROR, &info->tty->flags);
@@ -828,7 +835,10 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 	if ((!file || !tty_hung_up_p(file)) &&
 	    !(tty->flags & (1 << TTY_IO_ERROR))) {
 		result = port->mctrl;
+
+		spin_lock_irq(&port->lock);
 		result |= port->ops->get_mctrl(port);
+		spin_unlock_irq(&port->lock);
 	}
 	up(&state->sem);
 
@@ -1131,6 +1141,16 @@ static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios
 		spin_unlock_irqrestore(&state->port->lock, flags);
 	}
 
+	/* Handle turning on CRTSCTS */
+	if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
+		spin_lock_irqsave(&state->port->lock, flags);
+		if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) {
+			tty->hw_stopped = 1;
+			state->port->ops->stop_tx(state->port, 0);
+		}
+		spin_unlock_irqrestore(&state->port->lock, flags);
+	}
+
 #if 0
 	/*
 	 * No need to wake up processes in open wait, since they
@@ -1369,6 +1389,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 	DECLARE_WAITQUEUE(wait, current);
 	struct uart_info *info = state->info;
 	struct uart_port *port = state->port;
+	unsigned int mctrl;
 
 	info->blocked_open++;
 	state->count--;
@@ -1416,7 +1437,10 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		 * and wait for the carrier to indicate that the
 		 * modem is ready for us.
 		 */
-		if (port->ops->get_mctrl(port) & TIOCM_CAR)
+		spin_lock_irq(&port->lock);
+		mctrl = port->ops->get_mctrl(port);
+		spin_unlock_irq(&port->lock);
+		if (mctrl & TIOCM_CAR)
 			break;
 
 		up(&state->sem);
@@ -1618,7 +1642,9 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
 
 	if(capable(CAP_SYS_ADMIN))
 	{
+		spin_lock_irq(&port->lock);
 		status = port->ops->get_mctrl(port);
+		spin_unlock_irq(&port->lock);
 
 		ret += sprintf(buf + ret, " tx:%d rx:%d",
 				port->icount.tx, port->icount.rx);
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 3f1051a4a13..d085030df70 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -442,13 +442,10 @@ static unsigned int serial_txx9_tx_empty(struct uart_port *port)
 static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
 {
 	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
-	unsigned long flags;
 	unsigned int ret;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	ret =  ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS)
 		| ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	return ret;
 }
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 10e2990a40d..8d198880756 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -426,18 +426,15 @@ static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		sunsab_tx_idle(up);
 }
 
-/* port->lock is not held.  */
+/* port->lock is held by caller and interrupts are disabled.  */
 static unsigned int sunsab_get_mctrl(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
-	unsigned long flags;
 	unsigned char val;
 	unsigned int result;
 
 	result = 0;
 
-	spin_lock_irqsave(&up->port.lock, flags);
-
 	val = readb(&up->regs->r.pvr);
 	result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
 
@@ -447,8 +444,6 @@ static unsigned int sunsab_get_mctrl(struct uart_port *port)
 	val = readb(&up->regs->r.star);
 	result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
 
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
 	return result;
 }
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index ddc97c905e1..d57a3553aea 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -572,13 +572,10 @@ static unsigned int sunsu_tx_empty(struct uart_port *port)
 static unsigned int sunsu_get_mctrl(struct uart_port *port)
 {
 	struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
-	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
-	spin_lock_irqsave(&up->port.lock, flags);
 	status = serial_in(up, UART_MSR);
-	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	ret = 0;
 	if (status & UART_MSR_DCD)
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 8e65206d3d7..bff42a7b89d 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -610,27 +610,28 @@ static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *reg
 static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
 {
 	struct zilog_channel __iomem *channel;
-	unsigned long flags;
 	unsigned char status;
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	channel = ZILOG_CHANNEL_FROM_PORT(port);
 	status = sbus_readb(&channel->control);
 	ZSDELAY();
 
-	spin_unlock_irqrestore(&port->lock, flags);
-
 	return status;
 }
 
 /* The port lock is not held.  */
 static unsigned int sunzilog_tx_empty(struct uart_port *port)
 {
+	unsigned long flags;
 	unsigned char status;
 	unsigned int ret;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	status = sunzilog_read_channel_status(port);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	if (status & Tx_BUF_EMP)
 		ret = TIOCSER_TEMT;
 	else
@@ -639,7 +640,7 @@ static unsigned int sunzilog_tx_empty(struct uart_port *port)
 	return ret;
 }
 
-/* The port lock is not held.  */
+/* The port lock is held and interrupts are disabled.  */
 static unsigned int sunzilog_get_mctrl(struct uart_port *port)
 {
 	unsigned char status;
diff --git a/include/asm-alpha/serial.h b/include/asm-alpha/serial.h
index 7b2d9ee95a4..7e4b2987d45 100644
--- a/include/asm-alpha/serial.h
+++ b/include/asm-alpha/serial.h
@@ -22,54 +22,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#endif
-	
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS
diff --git a/include/asm-arm26/serial.h b/include/asm-arm26/serial.h
index 21e1df31f08..5fc747d1b50 100644
--- a/include/asm-arm26/serial.h
+++ b/include/asm-arm26/serial.h
@@ -30,34 +30,16 @@
 #if defined(CONFIG_ARCH_A5K)
      /* UART CLK        PORT  IRQ     FLAGS        */
 
-#define STD_SERIAL_PORT_DEFNS                                           \
+#define SERIAL_PORT_DFNS                                                \
         { 0, BASE_BAUD, 0x3F8, 10, STD_COM_FLAGS },     /* ttyS0 */     \
         { 0, BASE_BAUD, 0x2F8, 10, STD_COM_FLAGS },     /* ttyS1 */
 
 #else
 
-#define STD_SERIAL_PORT_DEFNS                                           \
+#define SERIAL_PORT_DFNS                                                \
         { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS0 */     \
         { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS1 */
 
 #endif
 
-#define EXTRA_SERIAL_PORT_DEFNS \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS2 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS3 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS4 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS5 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS6 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS7 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS8 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS9 */     \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS10 */    \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS11 */    \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS12 */    \
-        { 0, BASE_BAUD, 0    ,  0, STD_COM_FLAGS },     /* ttyS13 */
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS
-
 #endif
diff --git a/include/asm-i386/serial.h b/include/asm-i386/serial.h
index 21ddecc77c7..e1ecfccb743 100644
--- a/include/asm-i386/serial.h
+++ b/include/asm-i386/serial.h
@@ -22,109 +22,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#endif
-
-#define MCA_COM_FLAGS	(STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#ifdef CONFIG_MCA
-#define MCA_SERIAL_PORT_DFNS			\
-	{ 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
-#else
-#define MCA_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS		\
-	HUB6_SERIAL_PORT_DFNS		\
-	MCA_SERIAL_PORT_DFNS
-
diff --git a/include/asm-m68k/serial.h b/include/asm-m68k/serial.h
index 9f5bcdc105f..3fe29f8b019 100644
--- a/include/asm-m68k/serial.h
+++ b/include/asm-m68k/serial.h
@@ -26,54 +26,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#endif
-
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS },	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 8a70ff58f76..4eed8e2acdc 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -29,32 +29,6 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#define RS_TABLE_SIZE	64
-#else
-#define RS_TABLE_SIZE
-#endif
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
 #ifdef CONFIG_MACH_JAZZ
 #include <asm/jazz.h>
 
@@ -240,66 +214,10 @@
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },			/* ttyS14 (spare) */ \
-	{ 0, BASE_BAUD, 0x000, 0, 0 },			/* ttyS15 (spare) */ \
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else /* CONFIG_SERIAL_MANY_PORTS */
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif /* CONFIG_SERIAL_MANY_PORTS */
-
 #else /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
 #define STD_SERIAL_PORT_DEFNS
-#define EXTRA_SERIAL_PORT_DEFNS
 #endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
 
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
 #ifdef CONFIG_MOMENCO_JAGUAR_ATX
 /* Ordinary NS16552 duart with a 20MHz crystal.  */
 #define JAGUAR_ATX_UART_CLK	20000000
@@ -427,8 +345,6 @@
 	COBALT_SERIAL_PORT_DEFNS			\
 	DDB5477_SERIAL_PORT_DEFNS			\
 	EV96100_SERIAL_PORT_DEFNS			\
-	EXTRA_SERIAL_PORT_DEFNS				\
-	HUB6_SERIAL_PORT_DFNS				\
 	IP32_SERIAL_PORT_DEFNS                          \
 	ITE_SERIAL_PORT_DEFNS           		\
 	IVR_SERIAL_PORT_DEFNS           		\
diff --git a/include/asm-parisc/serial.h b/include/asm-parisc/serial.h
index 239c5dcab7e..82fd820d684 100644
--- a/include/asm-parisc/serial.h
+++ b/include/asm-parisc/serial.h
@@ -19,18 +19,4 @@
  * A500 w/ PCI serial cards: 5 + 4 * card ~= 17
  */
  
-#define STD_SERIAL_PORT_DEFNS			\
-	{ 0, },		/* ttyS0 */	\
-	{ 0, },		/* ttyS1 */	\
-	{ 0, },		/* ttyS2 */	\
-	{ 0, },		/* ttyS3 */	\
-	{ 0, },		/* ttyS4 */	\
-	{ 0, },		/* ttyS5 */	\
-	{ 0, },		/* ttyS6 */	\
-	{ 0, },		/* ttyS7 */	\
-	{ 0, },		/* ttyS8 */
-
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS
-
+#define SERIAL_PORT_DFNS
diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h
index fa9cbb67ce3..8f994f9f885 100644
--- a/include/asm-ppc/pc_serial.h
+++ b/include/asm-ppc/pc_serial.h
@@ -35,93 +35,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#endif
-	
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS		\
-	HUB6_SERIAL_PORT_DFNS
diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h
index 540f1220592..7233af42f75 100644
--- a/include/asm-sh/bigsur/serial.h
+++ b/include/asm-sh/bigsur/serial.h
@@ -14,13 +14,10 @@
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
 
 
-#define STD_SERIAL_PORT_DEFNS                   \
+#define SERIAL_PORT_DFNS                   \
         /* UART CLK   PORT IRQ     FLAGS        */                      \
         { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ 
 
-
-#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
-
 /* XXX: This should be moved ino irq.h */
 #define irq_cannonicalize(x) (x)
 
diff --git a/include/asm-sh/ec3104/serial.h b/include/asm-sh/ec3104/serial.h
index f8eb16312ed..cfe4d78ec1e 100644
--- a/include/asm-sh/ec3104/serial.h
+++ b/include/asm-sh/ec3104/serial.h
@@ -10,13 +10,11 @@
  * it's got the keyboard controller behind it so we can't really use it
  * (without moving the keyboard driver to userspace, which doesn't sound
  * like a very good idea) */
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x11C00, EC3104_IRQBASE+7, STD_COM_FLAGS }, /* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x12000, EC3104_IRQBASE+8, STD_COM_FLAGS }, /* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x12400, EC3104_IRQBASE+9, STD_COM_FLAGS }, /* ttyS2 */
 
-#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
-
 /* XXX: This should be moved ino irq.h */
 #define irq_cannonicalize(x) (x)
diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h
index 5474dbdbaa8..f51e232d5cd 100644
--- a/include/asm-sh/serial.h
+++ b/include/asm-sh/serial.h
@@ -29,20 +29,18 @@
 #ifdef CONFIG_HD64465
 #include <asm/hd64465.h>
 
-#define STD_SERIAL_PORT_DEFNS                   \
+#define SERIAL_PORT_DFNS                   \
         /* UART CLK   PORT IRQ     FLAGS        */                      \
         { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
 
 #else
 
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }	/* ttyS1 */
 
 #endif
 
-#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
-
 #endif
 #endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh64/serial.h b/include/asm-sh64/serial.h
index 8e39b4e90c7..29c9be15112 100644
--- a/include/asm-sh64/serial.h
+++ b/include/asm-sh64/serial.h
@@ -20,13 +20,11 @@
 
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
 
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }	/* ttyS1 */
 
-#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
-
 /* XXX: This should be moved ino irq.h */
 #define irq_cannonicalize(x) (x)
 
diff --git a/include/asm-x86_64/serial.h b/include/asm-x86_64/serial.h
index dbab232044c..dc752eafa68 100644
--- a/include/asm-x86_64/serial.h
+++ b/include/asm-x86_64/serial.h
@@ -22,109 +22,9 @@
 #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
 #endif
 
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#endif
-
-#define MCA_COM_FLAGS	(STD_COM_FLAGS|ASYNC_BOOT_ONLYMCA)
-
-/*
- * The following define the access methods for the HUB6 card. All
- * access is through two ports for all 24 possible chips. The card is
- * selected through the high 2 bits, the port on that card with the
- * "middle" 3 bits, and the register on that port with the bottom
- * 3 bits.
- *
- * While the access port and interrupt is configurable, the default
- * port locations are 0x302 for the port control register, and 0x303
- * for the data read/write register. Normally, the interrupt is at irq3
- * but can be anything from 3 to 7 inclusive. Note that using 3 will
- * require disabling com2.
- */
-
-#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
-
-#define STD_SERIAL_PORT_DEFNS			\
+#define SERIAL_PORT_DFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
 	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
 	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
 	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
 	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
-
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define EXTRA_SERIAL_PORT_DEFNS			\
-	{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, 	/* ttyS4 */	\
-	{ 0, BASE_BAUD, 0x1A8, 9, FOURPORT_FLAGS },	/* ttyS5 */	\
-	{ 0, BASE_BAUD, 0x1B0, 9, FOURPORT_FLAGS },	/* ttyS6 */	\
-	{ 0, BASE_BAUD, 0x1B8, 9, FOURPORT_FLAGS },	/* ttyS7 */	\
-	{ 0, BASE_BAUD, 0x2A0, 5, FOURPORT_FLAGS },	/* ttyS8 */	\
-	{ 0, BASE_BAUD, 0x2A8, 5, FOURPORT_FLAGS },	/* ttyS9 */	\
-	{ 0, BASE_BAUD, 0x2B0, 5, FOURPORT_FLAGS },	/* ttyS10 */	\
-	{ 0, BASE_BAUD, 0x2B8, 5, FOURPORT_FLAGS },	/* ttyS11 */	\
-	{ 0, BASE_BAUD, 0x330, 4, ACCENT_FLAGS },	/* ttyS12 */	\
-	{ 0, BASE_BAUD, 0x338, 4, ACCENT_FLAGS },	/* ttyS13 */	\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS14 (spare) */		\
-	{ 0, BASE_BAUD, 0x000, 0, 0 },	/* ttyS15 (spare) */		\
-	{ 0, BASE_BAUD, 0x100, 12, BOCA_FLAGS },	/* ttyS16 */	\
-	{ 0, BASE_BAUD, 0x108, 12, BOCA_FLAGS },	/* ttyS17 */	\
-	{ 0, BASE_BAUD, 0x110, 12, BOCA_FLAGS },	/* ttyS18 */	\
-	{ 0, BASE_BAUD, 0x118, 12, BOCA_FLAGS },	/* ttyS19 */	\
-	{ 0, BASE_BAUD, 0x120, 12, BOCA_FLAGS },	/* ttyS20 */	\
-	{ 0, BASE_BAUD, 0x128, 12, BOCA_FLAGS },	/* ttyS21 */	\
-	{ 0, BASE_BAUD, 0x130, 12, BOCA_FLAGS },	/* ttyS22 */	\
-	{ 0, BASE_BAUD, 0x138, 12, BOCA_FLAGS },	/* ttyS23 */	\
-	{ 0, BASE_BAUD, 0x140, 12, BOCA_FLAGS },	/* ttyS24 */	\
-	{ 0, BASE_BAUD, 0x148, 12, BOCA_FLAGS },	/* ttyS25 */	\
-	{ 0, BASE_BAUD, 0x150, 12, BOCA_FLAGS },	/* ttyS26 */	\
-	{ 0, BASE_BAUD, 0x158, 12, BOCA_FLAGS },	/* ttyS27 */	\
-	{ 0, BASE_BAUD, 0x160, 12, BOCA_FLAGS },	/* ttyS28 */	\
-	{ 0, BASE_BAUD, 0x168, 12, BOCA_FLAGS },	/* ttyS29 */	\
-	{ 0, BASE_BAUD, 0x170, 12, BOCA_FLAGS },	/* ttyS30 */	\
-	{ 0, BASE_BAUD, 0x178, 12, BOCA_FLAGS },	/* ttyS31 */
-#else
-#define EXTRA_SERIAL_PORT_DEFNS
-#endif
-
-/* You can have up to four HUB6's in the system, but I've only
- * included two cards here for a total of twelve ports.
- */
-#if (defined(CONFIG_HUB6) && defined(CONFIG_SERIAL_MANY_PORTS))
-#define HUB6_SERIAL_PORT_DFNS		\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,0) },  /* ttyS32 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,1) },  /* ttyS33 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,2) },  /* ttyS34 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,3) },  /* ttyS35 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,4) },  /* ttyS36 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(0,5) },  /* ttyS37 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,0) },  /* ttyS38 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,1) },  /* ttyS39 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,2) },  /* ttyS40 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,3) },  /* ttyS41 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,4) },  /* ttyS42 */	\
-	{ 0, BASE_BAUD, 0x302, 3, HUB6_FLAGS, C_P(1,5) },  /* ttyS43 */
-#else
-#define HUB6_SERIAL_PORT_DFNS
-#endif
-
-#ifdef CONFIG_MCA
-#define MCA_SERIAL_PORT_DFNS			\
-	{ 0, BASE_BAUD, 0x3220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x3228, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x4220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x4228, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x5220, 3, MCA_COM_FLAGS },	\
-	{ 0, BASE_BAUD, 0x5228, 3, MCA_COM_FLAGS },
-#else
-#define MCA_SERIAL_PORT_DFNS
-#endif
-
-#define SERIAL_PORT_DFNS		\
-	STD_SERIAL_PORT_DEFNS		\
-	EXTRA_SERIAL_PORT_DEFNS		\
-	HUB6_SERIAL_PORT_DFNS		\
-	MCA_SERIAL_PORT_DFNS
-