libata/IDE: remove combined mode quirk

Both old-IDE and libata should be able handle all controllers and
devices found using normal resource reservation methods.

This eliminates the awful, low-performing split-driver configuration
where old-IDE drove the PATA portion of a PCI device, in PIO-only mode,
and libata drove the SATA portion of the /same/ PCI device, in DMA mode.
Typically vendors would ship SATA hard drive / PATA optical
configuration, which would lend itself to slow (PIO-only) CD-ROM
performance.

For Intel users running in combined mode, it is now wholly dependent on
your driver choice (potentially link order, if you compile both drivers
in) whether old-IDE or libata will drive your hardware.

In either case, you will get full performance from both SATA and PATA
ports now, without having to pass a kernel command line parameter.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

8 files changed, 6 insertions, 173 deletions

diff --git a/arch/i386/defconfig b/arch/i386/defconfig
index f4efd66e1ee..c96911c37ae 100644
--- a/arch/i386/defconfig
+++ b/arch/i386/defconfig
@@ -692,7 +692,6 @@ CONFIG_SATA_SIL=y
 CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_INTEL_COMBINED=y
 CONFIG_SATA_ACPI=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 782906b644d..eb2f9a3d515 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -435,7 +435,6 @@ CONFIG_SCSI_SATA_SIL=m
 # CONFIG_SCSI_SATA_ULI is not set
 CONFIG_SCSI_SATA_VIA=m
 # CONFIG_SCSI_SATA_VITESSE is not set
-CONFIG_SCSI_SATA_INTEL_COMBINED=y
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 7a1e251e333..b26378815b9 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -631,7 +631,6 @@ CONFIG_SATA_SIL=y
 CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_INTEL_COMBINED=y
 CONFIG_SATA_ACPI=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index c679bba4789..365c306c7cf 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -156,11 +156,6 @@ config SATA_INIC162X
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
-config SATA_INTEL_COMBINED
-	bool
-	depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
-	default y
-
 config SATA_ACPI
 	bool
 	depends on ACPI && PCI
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 066689c5e50..0a194660fd2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -779,40 +779,16 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		/* Deal with combined mode hack. This side of the logic all
 		   goes away once the combined mode hack is killed in 2.6.21 */
 		if (!devm_request_region(dev, ATA_PRIMARY_CMD, 8, "libata")) {
-			struct resource *conflict, res;
-			res.start = ATA_PRIMARY_CMD;
-			res.end = ATA_PRIMARY_CMD + 8 - 1;
-			conflict = ____request_resource(&ioport_resource, &res);
-			while (conflict->child)
-				conflict = ____request_resource(conflict, &res);
-			if (!strcmp(conflict->name, "libata"))
-				legacy_mode |= ATA_PORT_PRIMARY;
-			else {
-				pcim_pin_device(pdev);
-				printk(KERN_WARNING "ata: 0x%0X IDE port busy\n" \
-						    "ata: conflict with %s\n",
-						    ATA_PRIMARY_CMD,
-						    conflict->name);
-			}
+			pcim_pin_device(pdev);
+			printk(KERN_WARNING "ata: 0x%0X IDE port busy\n",
+					    ATA_PRIMARY_CMD);
 		} else
 			legacy_mode |= ATA_PORT_PRIMARY;
 
 		if (!devm_request_region(dev, ATA_SECONDARY_CMD, 8, "libata")) {
-			struct resource *conflict, res;
-			res.start = ATA_SECONDARY_CMD;
-			res.end = ATA_SECONDARY_CMD + 8 - 1;
-			conflict = ____request_resource(&ioport_resource, &res);
-			while (conflict->child)
-				conflict = ____request_resource(conflict, &res);
-			if (!strcmp(conflict->name, "libata"))
-				legacy_mode |= ATA_PORT_SECONDARY;
-			else {
-				pcim_pin_device(pdev);
-				printk(KERN_WARNING "ata: 0x%X IDE port busy\n" \
-						    "ata: conflict with %s\n",
-						    ATA_SECONDARY_CMD,
-						    conflict->name);
-			}
+			pcim_pin_device(pdev);
+			printk(KERN_WARNING "ata: 0x%X IDE port busy\n",
+					    ATA_SECONDARY_CMD);
 		} else
 			legacy_mode |= ATA_PORT_SECONDARY;
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 65d6f23ead4..3411483240c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1303,119 +1303,6 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_EESSC,	quirk_alder_ioapic );
 #endif
 
-enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 };
-/* Defaults to combined */
-static enum ide_combined_type combined_mode;
-
-static int __init combined_setup(char *str)
-{
-	if (!strncmp(str, "ide", 3))
-		combined_mode = IDE;
-	else if (!strncmp(str, "libata", 6))
-		combined_mode = LIBATA;
-	else /* "combined" or anything else defaults to old behavior */
-		combined_mode = COMBINED;
-
-	return 1;
-}
-__setup("combined_mode=", combined_setup);
-
-#ifdef CONFIG_SATA_INTEL_COMBINED
-static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
-{
-	u8 prog, comb, tmp;
-	int ich = 0;
-
-	/*
-	 * Narrow down to Intel SATA PCI devices.
-	 */
-	switch (pdev->device) {
-	/* PCI ids taken from drivers/scsi/ata_piix.c */
-	case 0x24d1:
-	case 0x24df:
-	case 0x25a3:
-	case 0x25b0:
-		ich = 5;
-		break;
-	case 0x2651:
-	case 0x2652:
-	case 0x2653:
-	case 0x2680:	/* ESB2 */
-		ich = 6;
-		break;
-	case 0x27c0:
-	case 0x27c4:
-		ich = 7;
-		break;
-	case 0x2828:	/* ICH8M */
-		ich = 8;
-		break;
-	default:
-		/* we do not handle this PCI device */
-		return;
-	}
-
-	/*
-	 * Read combined mode register.
-	 */
-	pci_read_config_byte(pdev, 0x90, &tmp);	/* combined mode reg */
-
-	if (ich == 5) {
-		tmp &= 0x6;  /* interesting bits 2:1, PATA primary/secondary */
-		if (tmp == 0x4)		/* bits 10x */
-			comb = (1 << 0);	/* SATA port 0, PATA port 1 */
-		else if (tmp == 0x6)	/* bits 11x */
-			comb = (1 << 2);	/* PATA port 0, SATA port 1 */
-		else
-			return;			/* not in combined mode */
-	} else {
-		WARN_ON((ich != 6) && (ich != 7) && (ich != 8));
-		tmp &= 0x3;  /* interesting bits 1:0 */
-		if (tmp & (1 << 0))
-			comb = (1 << 2);	/* PATA port 0, SATA port 1 */
-		else if (tmp & (1 << 1))
-			comb = (1 << 0);	/* SATA port 0, PATA port 1 */
-		else
-			return;			/* not in combined mode */
-	}
-
-	/*
-	 * Read programming interface register.
-	 * (Tells us if it's legacy or native mode)
-	 */
-	pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
-
-	/* if SATA port is in native mode, we're ok. */
-	if (prog & comb)
-		return;
-
-	/* Don't reserve any so the IDE driver can get them (but only if
-	 * combined_mode=ide).
-	 */
-	if (combined_mode == IDE)
-		return;
-
-	/* Grab them both for libata if combined_mode=libata. */
-	if (combined_mode == LIBATA) {
-		request_region(0x1f0, 8, "libata");	/* port 0 */
-		request_region(0x170, 8, "libata");	/* port 1 */
-		return;
-	}
-
-	/* SATA port is in legacy mode.  Reserve port so that
-	 * IDE driver does not attempt to use it.  If request_region
-	 * fails, it will be obvious at boot time, so we don't bother
-	 * checking return values.
-	 */
-	if (comb == (1 << 0))
-		request_region(0x1f0, 8, "libata");	/* port 0 */
-	else
-		request_region(0x170, 8, "libata");	/* port 1 */
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    PCI_ANY_ID,	  quirk_intel_ide_combined );
-#endif /* CONFIG_SATA_INTEL_COMBINED */
-
-
 int pcie_mch_quirk;
 EXPORT_SYMBOL(pcie_mch_quirk);
 
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 6859a3b1408..71ea9231924 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -99,7 +99,6 @@ extern struct resource ioport_resource;
 extern struct resource iomem_resource;
 
 extern int request_resource(struct resource *root, struct resource *new);
-extern struct resource * ____request_resource(struct resource *root, struct resource *new);
 extern int release_resource(struct resource *new);
 extern int insert_resource(struct resource *parent, struct resource *new);
 extern int allocate_resource(struct resource *root, struct resource *new,
diff --git a/kernel/resource.c b/kernel/resource.c
index bdb55a33f96..9bd14fd3e6d 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -213,27 +213,6 @@ int request_resource(struct resource *root, struct resource *new)
 EXPORT_SYMBOL(request_resource);
 
 /**
- * ____request_resource - reserve a resource, with resource conflict returned
- * @root: root resource descriptor
- * @new: resource descriptor desired by caller
- *
- * Returns:
- * On success, NULL is returned.
- * On error, a pointer to the conflicting resource is returned.
- */
-struct resource *____request_resource(struct resource *root, struct resource *new)
-{
-	struct resource *conflict;
-
-	write_lock(&resource_lock);
-	conflict = __request_resource(root, new);
-	write_unlock(&resource_lock);
-	return conflict;
-}
-
-EXPORT_SYMBOL(____request_resource);
-
-/**
  * release_resource - release a previously reserved resource
  * @old: resource pointer
  */