Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)
  regulator: Voltage count for AB3100
  mfd: Convert WM8350 to use request_threaded_irq()
  mfd: Update MAINTAINERS patterns for WM831x
  mfd: Fix twl4030-power warnings
  regulator: AB3100 support
  rtc: AB3100 RTC support
  mfd: Fix ab3100-otp build failure
  mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board
  mfd: Print warning for twl4030 out-of-order script loading
  mfd: Add support for TWL4030/5030 dynamic power switching
  mfd: AB3100 OTP readout
  regulator: Add Freescale MC13783 driver
  mfd: Add Freescale MC13783 driver
  mfd: AB3100 disable irq nosync
  mfd: AB3100 alter default setting
  mfd: AB3100 propagate error
  mfd: AB3100 accessor function cleanups
  rtc: Add support for RTCs on Wolfson WM831x devices
  regulator: get pcap data from the parent device
  input: PCAP2 misc input driver
  ...

65 files changed, 12770 insertions, 119 deletions

diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x
new file mode 100644
index 00000000000..24f47d8f6a4
--- /dev/null
+++ b/Documentation/hwmon/wm831x
@@ -0,0 +1,37 @@
+Kernel driver wm831x-hwmon
+==========================
+
+Supported chips:
+  * Wolfson Microelectronics WM831x PMICs
+    Prefix: 'wm831x'
+    Datasheet:
+	http://www.wolfsonmicro.com/products/WM8310
+	http://www.wolfsonmicro.com/products/WM8311
+	http://www.wolfsonmicro.com/products/WM8312
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM831x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system.  Currently the driver provides
+reporting of all the input values but does not provide any alarms.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC.  Voltages in milivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 12 bit ADC.  Chip and battery temperatures
+are available.  The chip temperature is calculated as:
+
+	Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+thermistor component.
diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350
new file mode 100644
index 00000000000..98f923bd2e9
--- /dev/null
+++ b/Documentation/hwmon/wm8350
@@ -0,0 +1,26 @@
+Kernel driver wm8350-hwmon
+==========================
+
+Supported chips:
+  * Wolfson Microelectronics WM835x PMICs
+    Prefix: 'wm8350'
+    Datasheet:
+	http://www.wolfsonmicro.com/products/WM8350
+	http://www.wolfsonmicro.com/products/WM8351
+	http://www.wolfsonmicro.com/products/WM8352
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM835x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system.  Currently the driver provides
+simple access to these major supplies.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC.  For the internal supplies the ADC
+is referenced to the system VRTC.
diff --git a/MAINTAINERS b/MAINTAINERS
index e2b9486fd1a..bd3f026dbe6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5683,6 +5683,26 @@ S:	Supported
 F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
+WOLFSON MICROELECTRONICS PMIC DRIVERS
+P:	Mark Brown
+M:	broonie@opensource.wolfsonmicro.com
+L:	linux-kernel@vger.kernel.org
+T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
+W:	http://opensource.wolfsonmicro.com/node/8
+S:	Supported
+F:	drivers/leds/leds-wm83*.c
+F:	drivers/mfd/wm8*.c
+F:	drivers/power/wm83*.c
+F:	drivers/rtc/rtc-wm83*.c
+F:	drivers/regulator/wm8*.c
+F:	drivers/video/backlight/wm83*_bl.c
+F:	drivers/watchdog/wm83*_wdt.c
+F:	include/linux/mfd/wm831x/
+F:	include/linux/mfd/wm8350/
+F:	include/linux/mfd/wm8400/
+F:	sound/soc/codecs/wm8350.c
+F:	sound/soc/codecs/wm8400.c
+
 X.25 NETWORK LAYER
 M:	Henner Eisen <eis@baty.hanse.de>
 L:	linux-x25@vger.kernel.org
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 56d931a425f..e70baa79901 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
  *
  * Copyright (C) 2008-2009 Nokia
  *
@@ -282,7 +282,124 @@ static struct twl4030_usb_data rx51_usb_data = {
 	.usb_mode		= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_platform_data rx51_twldata = {
+static struct twl4030_ins sleep_on_seq[] __initdata = {
+/*
+ * Turn off VDD1 and VDD2.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
+/*
+ * And also turn off the OMAP3 PLLs and the sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
+};
+
+static struct twl4030_script sleep_on_script __initdata = {
+	.script = sleep_on_seq,
+	.size   = ARRAY_SIZE(sleep_on_seq),
+	.flags  = TWL4030_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_seq[] __initdata = {
+/*
+ * Reenable the OMAP3 PLLs.
+ * Wakeup VDD1 and VDD2.
+ * Reenable sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_script __initdata = {
+	.script	= wakeup_seq,
+	.size	= ARRAY_SIZE(wakeup_seq),
+	.flags	= TWL4030_WAKEUP12_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_p3_seq[] __initdata = {
+/*
+ * Wakeup VDD1 (dummy to be able to insert a delay)
+ * Enable CLKEN
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_p3_script __initdata = {
+	.script	= wakeup_p3_seq,
+	.size	= ARRAY_SIZE(wakeup_p3_seq),
+	.flags	= TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins wrst_seq[] __initdata = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
+		0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
+	{MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script wrst_script __initdata = {
+	.script = wrst_seq,
+	.size   = ARRAY_SIZE(wrst_seq),
+	.flags  = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_scripts[] __initdata = {
+	/* wakeup12 script should be loaded before sleep script, otherwise a
+	   board might hit retention before loading of wakeup script is
+	   completed. This can cause boot failures depending on timing issues.
+	*/
+	&wakeup_script,
+	&sleep_on_script,
+	&wakeup_p3_script,
+	&wrst_script,
+};
+
+static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
+	{ .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
+		.type2 = 1 },
+	{ 0, 0},
+};
+
+static struct twl4030_power_data rx51_t2scripts_data __initdata = {
+	.scripts        = twl4030_scripts,
+	.num = ARRAY_SIZE(twl4030_scripts),
+	.resource_config = twl4030_rconfig,
+};
+
+
+
+static struct twl4030_platform_data rx51_twldata __initdata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
 
@@ -291,6 +408,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
 	.usb			= &rx51_usb_data,
+	.power			= &rx51_t2scripts_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 96dda81c922..6b4c484a699 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -155,6 +155,13 @@ config GPIO_TWL4030
 	  Say yes here to access the GPIO signals of various multi-function
 	  power management chips from Texas Instruments.
 
+config GPIO_WM831X
+	tristate "WM831x GPIOs"
+	depends on MFD_WM831X
+	help
+	  Say yes here to access the GPIO signals of WM831x power management
+	  chips from Wolfson Microelectronics.
+
 comment "PCI GPIO expanders:"
 
 config GPIO_BT8XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9244c6fcd8b..ea7c745f26a 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio.o
 obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
 obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
+obj-$(CONFIG_GPIO_WM831X)	+= wm831x-gpio.o
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
new file mode 100644
index 00000000000..f9c09a54ec7
--- /dev/null
+++ b/drivers/gpio/wm831x-gpio.c
@@ -0,0 +1,252 @@
+/*
+ * wm831x-gpio.c  --  gpiolib support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#define WM831X_GPIO_MAX 16
+
+struct wm831x_gpio {
+	struct wm831x *wm831x;
+	struct gpio_chip gpio_chip;
+};
+
+static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct wm831x_gpio, gpio_chip);
+}
+
+static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+			       WM831X_GPN_DIR | WM831X_GPN_TRI,
+			       WM831X_GPN_DIR);
+}
+
+static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+	if (ret < 0)
+		return ret;
+
+	if (ret & 1 << offset)
+		return 1;
+	else
+		return 0;
+}
+
+static int wm831x_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+			       WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
+}
+
+static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+	wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
+			value << offset);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+	struct wm831x *wm831x = wm831x_gpio->wm831x;
+	int i;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		int gpio = i + chip->base;
+		int reg;
+		const char *label, *pull, *powerdomain;
+
+		/* We report the GPIO even if it's not requested since
+		 * we're also reporting things like alternate
+		 * functions which apply even when the GPIO is not in
+		 * use as a GPIO.
+		 */
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			label = "Unrequested";
+
+		seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
+
+		reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
+		if (reg < 0) {
+			dev_err(wm831x->dev,
+				"GPIO control %d read failed: %d\n",
+				gpio, reg);
+			seq_printf(s, "\n");
+			continue;
+		}
+
+		switch (reg & WM831X_GPN_PULL_MASK) {
+		case WM831X_GPIO_PULL_NONE:
+			pull = "nopull";
+			break;
+		case WM831X_GPIO_PULL_DOWN:
+			pull = "pulldown";
+			break;
+		case WM831X_GPIO_PULL_UP:
+			pull = "pullup";
+		default:
+			pull = "INVALID PULL";
+			break;
+		}
+
+		switch (i + 1) {
+		case 1 ... 3:
+		case 7 ... 9:
+			if (reg & WM831X_GPN_PWR_DOM)
+				powerdomain = "VPMIC";
+			else
+				powerdomain = "DBVDD";
+			break;
+
+		case 4 ... 6:
+		case 10 ... 12:
+			if (reg & WM831X_GPN_PWR_DOM)
+				powerdomain = "SYSVDD";
+			else
+				powerdomain = "DBVDD";
+			break;
+
+		case 13 ... 16:
+			powerdomain = "TPVDD";
+			break;
+
+		default:
+			BUG();
+			break;
+		}
+
+		seq_printf(s, " %s %s %s %s%s\n"
+			   "                                  %s%s (0x%4x)\n",
+			   reg & WM831X_GPN_DIR ? "in" : "out",
+			   wm831x_gpio_get(chip, i) ? "high" : "low",
+			   pull,
+			   powerdomain,
+			   reg & WM831X_GPN_POL ? " inverted" : "",
+			   reg & WM831X_GPN_OD ? "open-drain" : "CMOS",
+			   reg & WM831X_GPN_TRI ? " tristated" : "",
+			   reg);
+	}
+}
+#else
+#define wm831x_gpio_dbg_show NULL
+#endif
+
+static struct gpio_chip template_chip = {
+	.label			= "wm831x",
+	.owner			= THIS_MODULE,
+	.direction_input	= wm831x_gpio_direction_in,
+	.get			= wm831x_gpio_get,
+	.direction_output	= wm831x_gpio_direction_out,
+	.set			= wm831x_gpio_set,
+	.dbg_show		= wm831x_gpio_dbg_show,
+	.can_sleep		= 1,
+};
+
+static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	struct wm831x_gpio *wm831x_gpio;
+	int ret;
+
+	wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL);
+	if (wm831x_gpio == NULL)
+		return -ENOMEM;
+
+	wm831x_gpio->wm831x = wm831x;
+	wm831x_gpio->gpio_chip = template_chip;
+	wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX;
+	wm831x_gpio->gpio_chip.dev = &pdev->dev;
+	if (pdata && pdata->gpio_base)
+		wm831x_gpio->gpio_chip.base = pdata->gpio_base;
+	else
+		wm831x_gpio->gpio_chip.base = -1;
+
+	ret = gpiochip_add(&wm831x_gpio->gpio_chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+			ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, wm831x_gpio);
+
+	return ret;
+
+err:
+	kfree(wm831x_gpio);
+	return ret;
+}
+
+static int __devexit wm831x_gpio_remove(struct platform_device *pdev)
+{
+	struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = gpiochip_remove(&wm831x_gpio->gpio_chip);
+	if (ret == 0)
+		kfree(wm831x_gpio);
+
+	return ret;
+}
+
+static struct platform_driver wm831x_gpio_driver = {
+	.driver.name	= "wm831x-gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= wm831x_gpio_probe,
+	.remove		= __devexit_p(wm831x_gpio_remove),
+};
+
+static int __init wm831x_gpio_init(void)
+{
+	return platform_driver_register(&wm831x_gpio_driver);
+}
+subsys_initcall(wm831x_gpio_init);
+
+static void __exit wm831x_gpio_exit(void)
+{
+	platform_driver_unregister(&wm831x_gpio_driver);
+}
+module_exit(wm831x_gpio_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-gpio");
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 461abb1e273..ed7711d11ae 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -946,6 +946,27 @@ config SENSORS_W83627EHF
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83627ehf.
 
+config SENSORS_WM831X
+	tristate "WM831x PMICs"
+	depends on MFD_WM831X
+	help
+	  If you say yes here you get support for the hardware
+	  monitoring functionality of the Wolfson Microelectronics
+	  WM831x series of PMICs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called wm831x-hwmon.
+
+config SENSORS_WM8350
+	tristate "Wolfson Microelectronics WM835x"
+	depends on MFD_WM8350
+	help
+	  If you say yes here you get support for the hardware
+	  monitoring features of the WM835x series of PMICs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called wm8350-hwmon.
+
 config SENSORS_ULTRA45
 	tristate "Sun Ultra45 PIC16F747"
 	depends on SPARC64
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 2e547881bc0..bcf73a9bb61 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -93,6 +93,8 @@ obj-$(CONFIG_SENSORS_VT8231)	+= vt8231.o
 obj-$(CONFIG_SENSORS_W83627EHF)	+= w83627ehf.o
 obj-$(CONFIG_SENSORS_W83L785TS)	+= w83l785ts.o
 obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
+obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
+obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
 
 ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
new file mode 100644
index 00000000000..c16e9e74c35
--- /dev/null
+++ b/drivers/hwmon/wm831x-hwmon.c
@@ -0,0 +1,226 @@
+/*
+ * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC
+ *                                hardware monitoring features.
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+
+struct wm831x_hwmon {
+	struct wm831x *wm831x;
+	struct device *classdev;
+};
+
+static ssize_t show_name(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "wm831x\n");
+}
+
+static const char *input_names[] = {
+	[WM831X_AUX_SYSVDD]    = "SYSVDD",
+	[WM831X_AUX_USB]       = "USB",
+	[WM831X_AUX_BKUP_BATT] = "Backup battery",
+	[WM831X_AUX_BATT]      = "Battery",
+	[WM831X_AUX_WALL]      = "WALL",
+	[WM831X_AUX_CHIP_TEMP] = "PMIC",
+	[WM831X_AUX_BATT_TEMP] = "Battery",
+};
+
+
+static ssize_t show_voltage(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+	int channel = to_sensor_dev_attr(attr)->index;
+	int ret;
+
+	ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
+}
+
+static ssize_t show_chip_temp(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+	int channel = to_sensor_dev_attr(attr)->index;
+	int ret;
+
+	ret = wm831x_auxadc_read(hwmon->wm831x, channel);
+	if (ret < 0)
+		return ret;
+
+	/* Degrees celsius = (512.18-ret) / 1.0983 */
+	ret = 512180 - (ret * 1000);
+	ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	int channel = to_sensor_dev_attr(attr)->index;
+
+	return sprintf(buf, "%s\n", input_names[channel]);
+}
+
+#define WM831X_VOLTAGE(id, name) \
+	static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
+				  NULL, name)
+
+#define WM831X_NAMED_VOLTAGE(id, name) \
+	WM831X_VOLTAGE(id, name); \
+	static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label,	\
+				  NULL, name)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+WM831X_VOLTAGE(0, WM831X_AUX_AUX1);
+WM831X_VOLTAGE(1, WM831X_AUX_AUX2);
+WM831X_VOLTAGE(2, WM831X_AUX_AUX3);
+WM831X_VOLTAGE(3, WM831X_AUX_AUX4);
+
+WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD);
+WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB);
+WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT);
+WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL);
+WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL,
+			  WM831X_AUX_CHIP_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+			  WM831X_AUX_CHIP_TEMP);
+/* Report as a voltage since conversion depends on external components
+ * and that's what the ABI wants. */
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_voltage, NULL,
+			  WM831X_AUX_BATT_TEMP);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
+			  WM831X_AUX_BATT_TEMP);
+
+static struct attribute *wm831x_attributes[] = {
+	&dev_attr_name.attr,
+
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_label.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_label.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in6_label.dev_attr.attr,
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in7_label.dev_attr.attr,
+	&sensor_dev_attr_in8_input.dev_attr.attr,
+	&sensor_dev_attr_in8_label.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_label.dev_attr.attr,
+
+	NULL
+};
+
+static const struct attribute_group wm831x_attr_group = {
+	.attrs	= wm831x_attributes,
+};
+
+static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_hwmon *hwmon;
+	int ret;
+
+	hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	hwmon->wm831x = wm831x;
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group);
+	if (ret)
+		goto err;
+
+	hwmon->classdev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(hwmon->classdev)) {
+		ret = PTR_ERR(hwmon->classdev);
+		goto err_sysfs;
+	}
+
+	platform_set_drvdata(pdev, hwmon);
+
+	return 0;
+
+err_sysfs:
+	sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+err:
+	kfree(hwmon);
+	return ret;
+}
+
+static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
+{
+	struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(hwmon->classdev);
+	sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+	platform_set_drvdata(pdev, NULL);
+	kfree(hwmon);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_hwmon_driver = {
+	.probe = wm831x_hwmon_probe,
+	.remove = __devexit_p(wm831x_hwmon_remove),
+	.driver = {
+		.name = "wm831x-hwmon",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init wm831x_hwmon_init(void)
+{
+	return platform_driver_register(&wm831x_hwmon_driver);
+}
+module_init(wm831x_hwmon_init);
+
+static void __exit wm831x_hwmon_exit(void)
+{
+	platform_driver_unregister(&wm831x_hwmon_driver);
+}
+module_exit(wm831x_hwmon_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-hwmon");
diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c
new file mode 100644
index 00000000000..13290595ca8
--- /dev/null
+++ b/drivers/hwmon/wm8350-hwmon.c
@@ -0,0 +1,151 @@
+/*
+ * drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC
+ *                                  hardware monitoring features.
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/comparator.h>
+
+static ssize_t show_name(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "wm8350\n");
+}
+
+static const char *input_names[] = {
+	[WM8350_AUXADC_USB]  = "USB",
+	[WM8350_AUXADC_LINE] = "Line",
+	[WM8350_AUXADC_BATT] = "Battery",
+};
+
+
+static ssize_t show_voltage(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	int channel = to_sensor_dev_attr(attr)->index;
+	int val;
+
+	val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF;
+	val = DIV_ROUND_CLOSEST(val, 1000);
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	int channel = to_sensor_dev_attr(attr)->index;
+
+	return sprintf(buf, "%s\n", input_names[channel]);
+}
+
+#define WM8350_NAMED_VOLTAGE(id, name) \
+	static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
+				  NULL, name);		\
+	static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label,	\
+				  NULL, name)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB);
+WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT);
+WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE);
+
+static struct attribute *wm8350_attributes[] = {
+	&dev_attr_name.attr,
+
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_label.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_label.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_label.dev_attr.attr,
+
+	NULL,
+};
+
+static const struct attribute_group wm8350_attr_group = {
+	.attrs	= wm8350_attributes,
+};
+
+static int __devinit wm8350_hwmon_probe(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group);
+	if (ret)
+		goto err;
+
+	wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(wm8350->hwmon.classdev)) {
+		ret = PTR_ERR(wm8350->hwmon.classdev);
+		goto err_group;
+	}
+
+	return 0;
+
+err_group:
+	sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
+err:
+	return ret;
+}
+
+static int __devexit wm8350_hwmon_remove(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(wm8350->hwmon.classdev);
+	sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
+
+	return 0;
+}
+
+static struct platform_driver wm8350_hwmon_driver = {
+	.probe = wm8350_hwmon_probe,
+	.remove = __devexit_p(wm8350_hwmon_remove),
+	.driver = {
+		.name = "wm8350-hwmon",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init wm8350_hwmon_init(void)
+{
+	return platform_driver_register(&wm8350_hwmon_driver);
+}
+module_init(wm8350_hwmon_init);
+
+static void __exit wm8350_hwmon_exit(void)
+{
+	platform_driver_unregister(&wm8350_hwmon_driver);
+}
+module_exit(wm8350_hwmon_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM8350 Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-hwmon");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index cbe21bc96b5..1a50be379cb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -279,4 +279,24 @@ config INPUT_BFIN_ROTARY
 	  To compile this driver as a module, choose M here: the
 	  module will be called bfin-rotary.
 
+config INPUT_WM831X_ON
+	tristate "WM831X ON pin"
+	depends on MFD_WM831X
+	help
+	  Support the ON pin of WM831X PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called wm831x_on.
+
+config INPUT_PCAP
+	tristate "Motorola EZX PCAP misc input events"
+	depends on EZX_PCAP
+	help
+	  Say Y here if you want to use Power key and Headphone button
+	  on Motorola EZX phones.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcap_keys.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 79c1e9a5ea3..bf4db626c31 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
+obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
@@ -26,4 +27,6 @@ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
+
diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c
new file mode 100644
index 00000000000..7ea969347ca
--- /dev/null
+++ b/drivers/input/misc/pcap_keys.c
@@ -0,0 +1,144 @@
+/*
+ *  Input driver for PCAP events:
+ *   * Power key
+ *   * Headphone button
+ *
+ *  Copyright (c) 2008,2009 Ilya Petrov <ilya.muromec@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/ezx-pcap.h>
+
+struct pcap_keys {
+	struct pcap_chip *pcap;
+	struct input_dev *input;
+};
+
+/* PCAP2 interrupts us on keypress */
+static irqreturn_t pcap_keys_handler(int irq, void *_pcap_keys)
+{
+	struct pcap_keys *pcap_keys = _pcap_keys;
+	int pirq = irq_to_pcap(pcap_keys->pcap, irq);
+	u32 pstat;
+
+	ezx_pcap_read(pcap_keys->pcap, PCAP_REG_PSTAT, &pstat);
+	pstat &= 1 << pirq;
+
+	switch (pirq) {
+	case PCAP_IRQ_ONOFF:
+		input_report_key(pcap_keys->input, KEY_POWER, !pstat);
+		break;
+	case PCAP_IRQ_MIC:
+		input_report_key(pcap_keys->input, KEY_HP, !pstat);
+		break;
+	}
+
+	input_sync(pcap_keys->input);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit pcap_keys_probe(struct platform_device *pdev)
+{
+	int err = -ENOMEM;
+	struct pcap_keys *pcap_keys;
+	struct input_dev *input_dev;
+
+	pcap_keys = kmalloc(sizeof(struct pcap_keys), GFP_KERNEL);
+	if (!pcap_keys)
+		return err;
+
+	pcap_keys->pcap = dev_get_drvdata(pdev->dev.parent);
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		goto fail;
+
+	pcap_keys->input = input_dev;
+
+	platform_set_drvdata(pdev, pcap_keys);
+	input_dev->name = pdev->name;
+	input_dev->phys = "pcap-keys/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(KEY_POWER, input_dev->keybit);
+	__set_bit(KEY_HP, input_dev->keybit);
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto fail_allocate;
+
+	err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF),
+			pcap_keys_handler, 0, "Power key", pcap_keys);
+	if (err)
+		goto fail_register;
+
+	err = request_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC),
+			pcap_keys_handler, 0, "Headphone button", pcap_keys);
+	if (err)
+		goto fail_pwrkey;
+
+	return 0;
+
+fail_pwrkey:
+	free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys);
+fail_register:
+	input_unregister_device(input_dev);
+	goto fail;
+fail_allocate:
+	input_free_device(input_dev);
+fail:
+	kfree(pcap_keys);
+	return err;
+}
+
+static int __devexit pcap_keys_remove(struct platform_device *pdev)
+{
+	struct pcap_keys *pcap_keys = platform_get_drvdata(pdev);
+
+	free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_ONOFF), pcap_keys);
+	free_irq(pcap_to_irq(pcap_keys->pcap, PCAP_IRQ_MIC), pcap_keys);
+
+	input_unregister_device(pcap_keys->input);
+	kfree(pcap_keys);
+
+	return 0;
+}
+
+static struct platform_driver pcap_keys_device_driver = {
+	.probe		= pcap_keys_probe,
+	.remove		= __devexit_p(pcap_keys_remove),
+	.driver		= {
+		.name	= "pcap-keys",
+		.owner	= THIS_MODULE,
+	}
+};
+
+static int __init pcap_keys_init(void)
+{
+	return platform_driver_register(&pcap_keys_device_driver);
+};
+
+static void __exit pcap_keys_exit(void)
+{
+	platform_driver_unregister(&pcap_keys_device_driver);
+};
+
+module_init(pcap_keys_init);
+module_exit(pcap_keys_exit);
+
+MODULE_DESCRIPTION("Motorola PCAP2 input events driver");
+MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcap_keys");
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
new file mode 100644
index 00000000000..ba4f5dd7c60
--- /dev/null
+++ b/drivers/input/misc/wm831x-on.c
@@ -0,0 +1,163 @@
+/**
+ * wm831x-on.c - WM831X ON pin driver
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/wm831x/core.h>
+
+struct wm831x_on {
+	struct input_dev *dev;
+	struct delayed_work work;
+	struct wm831x *wm831x;
+};
+
+/*
+ * The chip gives us an interrupt when the ON pin is asserted but we
+ * then need to poll to see when the pin is deasserted.
+ */
+static void wm831x_poll_on(struct work_struct *work)
+{
+	struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on,
+						   work.work);
+	struct wm831x *wm831x = wm831x_on->wm831x;
+	int poll, ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL);
+	if (ret >= 0) {
+		poll = !(ret & WM831X_ON_PIN_STS);
+
+		input_report_key(wm831x_on->dev, KEY_POWER, poll);
+		input_sync(wm831x_on->dev);
+	} else {
+		dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret);
+		poll = 1;
+	}
+
+	if (poll)
+		schedule_delayed_work(&wm831x_on->work, 100);
+}
+
+static irqreturn_t wm831x_on_irq(int irq, void *data)
+{
+	struct wm831x_on *wm831x_on = data;
+
+	schedule_delayed_work(&wm831x_on->work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit wm831x_on_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_on *wm831x_on;
+	int irq = platform_get_irq(pdev, 0);
+	int ret;
+
+	wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL);
+	if (!wm831x_on) {
+		dev_err(&pdev->dev, "Can't allocate data\n");
+		return -ENOMEM;
+	}
+
+	wm831x_on->wm831x = wm831x;
+	INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on);
+
+	wm831x_on->dev = input_allocate_device();
+	if (!wm831x_on->dev) {
+		dev_err(&pdev->dev, "Can't allocate input dev\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY);
+	wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+	wm831x_on->dev->name = "wm831x_on";
+	wm831x_on->dev->phys = "wm831x_on/input0";
+	wm831x_on->dev->dev.parent = &pdev->dev;
+
+	ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
+				 IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
+		goto err_input_dev;
+	}
+	ret = input_register_device(wm831x_on->dev);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret);
+		goto err_irq;
+	}
+
+	platform_set_drvdata(pdev, wm831x_on);
+
+	return 0;
+
+err_irq:
+	wm831x_free_irq(wm831x, irq, NULL);
+err_input_dev:
+	input_free_device(wm831x_on->dev);
+err:
+	kfree(wm831x_on);
+	return ret;
+}
+
+static int __devexit wm831x_on_remove(struct platform_device *pdev)
+{
+	struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
+	cancel_delayed_work_sync(&wm831x_on->work);
+	input_unregister_device(wm831x_on->dev);
+	kfree(wm831x_on);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_on_driver = {
+	.probe		= wm831x_on_probe,
+	.remove		= __devexit_p(wm831x_on_remove),
+	.driver		= {
+		.name	= "wm831x-on",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init wm831x_on_init(void)
+{
+	return platform_driver_register(&wm831x_on_driver);
+}
+module_init(wm831x_on_init);
+
+static void __exit wm831x_on_exit(void)
+{
+	platform_driver_unregister(&wm831x_on_driver);
+}
+module_exit(wm831x_on_exit);
+
+MODULE_ALIAS("platform:wm831x-on");
+MODULE_DESCRIPTION("WM831x ON pin");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 87a1ae63bcc..ab02d72afbf 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -510,4 +510,13 @@ config TOUCHSCREEN_W90X900
 	  To compile this driver as a module, choose M here: the
 	  module will be called w90p910_ts.
 
+config TOUCHSCREEN_PCAP
+	tristate "Motorola PCAP touchscreen"
+	depends on EZX_PCAP
+	help
+	  Say Y here if you have a Motorola EZX telephone and
+	  want to enable support for the built-in touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcap_ts.
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 3e1c5e0b952..4599bf7ad81 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -40,3 +40,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c
new file mode 100644
index 00000000000..67fcd33595d
--- /dev/null
+++ b/drivers/input/touchscreen/pcap_ts.c
@@ -0,0 +1,271 @@
+/*
+ * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform.
+ *
+ *  Copyright (C) 2006 Harald Welte <laforge@openezx.org>
+ *  Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/pm.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/ezx-pcap.h>
+
+struct pcap_ts {
+	struct pcap_chip *pcap;
+	struct input_dev *input;
+	struct delayed_work work;
+	u16 x, y;
+	u16 pressure;
+	u8 read_state;
+};
+
+#define SAMPLE_DELAY	20 /* msecs */
+
+#define X_AXIS_MIN	0
+#define X_AXIS_MAX	1023
+#define Y_AXIS_MAX	X_AXIS_MAX
+#define Y_AXIS_MIN	X_AXIS_MIN
+#define PRESSURE_MAX	X_AXIS_MAX
+#define PRESSURE_MIN	X_AXIS_MIN
+
+static void pcap_ts_read_xy(void *data, u16 res[2])
+{
+	struct pcap_ts *pcap_ts = data;
+
+	switch (pcap_ts->read_state) {
+	case PCAP_ADC_TS_M_PRESSURE:
+		/* pressure reading is unreliable */
+		if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX)
+			pcap_ts->pressure = res[0];
+		pcap_ts->read_state = PCAP_ADC_TS_M_XY;
+		schedule_delayed_work(&pcap_ts->work, 0);
+		break;
+	case PCAP_ADC_TS_M_XY:
+		pcap_ts->y = res[0];
+		pcap_ts->x = res[1];
+		if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX ||
+		    pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) {
+			/* pen has been released */
+			input_report_abs(pcap_ts->input, ABS_PRESSURE, 0);
+			input_report_key(pcap_ts->input, BTN_TOUCH, 0);
+
+			pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+			schedule_delayed_work(&pcap_ts->work, 0);
+		} else {
+			/* pen is touching the screen */
+			input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x);
+			input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y);
+			input_report_key(pcap_ts->input, BTN_TOUCH, 1);
+			input_report_abs(pcap_ts->input, ABS_PRESSURE,
+						pcap_ts->pressure);
+
+			/* switch back to pressure read mode */
+			pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+			schedule_delayed_work(&pcap_ts->work,
+					msecs_to_jiffies(SAMPLE_DELAY));
+		}
+		input_sync(pcap_ts->input);
+		break;
+	default:
+		dev_warn(&pcap_ts->input->dev,
+				"pcap_ts: Warning, unhandled read_state %d\n",
+				pcap_ts->read_state);
+		break;
+	}
+}
+
+static void pcap_ts_work(struct work_struct *work)
+{
+	struct delayed_work *dw = container_of(work, struct delayed_work, work);
+	struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work);
+	u8 ch[2];
+
+	pcap_set_ts_bits(pcap_ts->pcap,
+			pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+	if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY)
+		return;
+
+	/* start adc conversion */
+	ch[0] = PCAP_ADC_CH_TS_X1;
+	ch[1] = PCAP_ADC_CH_TS_Y1;
+	pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch,
+						pcap_ts_read_xy, pcap_ts);
+}
+
+static irqreturn_t pcap_ts_event_touch(int pirq, void *data)
+{
+	struct pcap_ts *pcap_ts = data;
+
+	if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) {
+		pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+		schedule_delayed_work(&pcap_ts->work, 0);
+	}
+	return IRQ_HANDLED;
+}
+
+static int pcap_ts_open(struct input_dev *dev)
+{
+	struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+	schedule_delayed_work(&pcap_ts->work, 0);
+
+	return 0;
+}
+
+static void pcap_ts_close(struct input_dev *dev)
+{
+	struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&pcap_ts->work);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+}
+
+static int __devinit pcap_ts_probe(struct platform_device *pdev)
+{
+	struct input_dev *input_dev;
+	struct pcap_ts *pcap_ts;
+	int err = -ENOMEM;
+
+	pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL);
+	if (!pcap_ts)
+		return err;
+
+	pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent);
+	platform_set_drvdata(pdev, pcap_ts);
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		goto fail;
+
+	INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+	pcap_ts->input = input_dev;
+	input_set_drvdata(input_dev, pcap_ts);
+
+	input_dev->name = "pcap-touchscreen";
+	input_dev->phys = "pcap_ts/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0002;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = pcap_ts_open;
+	input_dev->close = pcap_ts_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN,
+			     PRESSURE_MAX, 0, 0);
+
+	err = input_register_device(pcap_ts->input);
+	if (err)
+		goto fail_allocate;
+
+	err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS),
+			pcap_ts_event_touch, 0, "Touch Screen", pcap_ts);
+	if (err)
+		goto fail_register;
+
+	return 0;
+
+fail_register:
+	input_unregister_device(input_dev);
+	goto fail;
+fail_allocate:
+	input_free_device(input_dev);
+fail:
+	kfree(pcap_ts);
+
+	return err;
+}
+
+static int __devexit pcap_ts_remove(struct platform_device *pdev)
+{
+	struct pcap_ts *pcap_ts = platform_get_drvdata(pdev);
+
+	free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts);
+	cancel_delayed_work_sync(&pcap_ts->work);
+
+	input_unregister_device(pcap_ts->input);
+
+	kfree(pcap_ts);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcap_ts_suspend(struct device *dev)
+{
+	struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+	pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR);
+	return 0;
+}
+
+static int pcap_ts_resume(struct device *dev)
+{
+	struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+	return 0;
+}
+
+static struct dev_pm_ops pcap_ts_pm_ops = {
+	.suspend	= pcap_ts_suspend,
+	.resume		= pcap_ts_resume,
+};
+#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops)
+#else
+#define PCAP_TS_PM_OPS NULL
+#endif
+
+static struct platform_driver pcap_ts_driver = {
+	.probe		= pcap_ts_probe,
+	.remove		= __devexit_p(pcap_ts_remove),
+	.driver		= {
+		.name	= "pcap-ts",
+		.owner	= THIS_MODULE,
+		.pm	= PCAP_TS_PM_OPS,
+	},
+};
+
+static int __init pcap_ts_init(void)
+{
+	return platform_driver_register(&pcap_ts_driver);
+}
+
+static void __exit pcap_ts_exit(void)
+{
+	platform_driver_unregister(&pcap_ts_driver);
+}
+
+module_init(pcap_ts_init);
+module_exit(pcap_ts_exit);
+
+MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
+MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcap_ts");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 491ac0f800d..570be139f9d 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -108,6 +108,19 @@ config TWL4030_CORE
 	  high speed USB OTG transceiver, an audio codec (on most
 	  versions) and many other features.
 
+config TWL4030_POWER
+	bool "Support power resources on TWL4030 family chips"
+	depends on TWL4030_CORE && ARM
+	help
+	  Say yes here if you want to use the power resources on the
+	  TWL4030 family chips.  Most of these resources are regulators,
+	  which have a separate driver; some are control signals, such
+	  as clock request handshaking.
+
+	  This driver uses board-specific data to initialize the resources
+	  and load scripts controling which resources are switched off/on
+	  or reset when a sleep, wakeup or warm reset event occurs.
+
 config MFD_TMIO
 	bool
 	default n
@@ -157,6 +170,16 @@ config MFD_WM8400
 	  the device, additional drivers must be enabled in order to use
 	  the functionality of the device.
 
+config MFD_WM831X
+	tristate "Support Wolfson Microelectronics WM831x PMICs"
+	select MFD_CORE
+	depends on I2C
+	help
+	  Support for the Wolfson Microelecronics WM831x PMICs.  This
+	  driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_WM8350
 	tristate
 
@@ -228,6 +251,16 @@ config MFD_PCF50633
 	  facilities, and registers devices for the various functions
 	  so that function-specific drivers can bind to them.
 
+config MFD_MC13783
+	tristate "Support Freescale MC13783"
+	depends on SPI_MASTER
+	select MFD_CORE
+	help
+	  Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
+	  This driver provides common support for accessing  the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config PCF50633_ADC
 	tristate "Support for NXP PCF50633 ADC"
 	depends on MFD_PCF50633
@@ -256,6 +289,15 @@ config AB3100_CORE
 	  LEDs, vibrator, system power and temperature, power management
 	  and ALSA sound.
 
+config AB3100_OTP
+	tristate "ST-Ericsson AB3100 OTP functions"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
+	  programmable memory) support. This exposes a sysfs file to read
+	  out OTP values.
+
 config EZX_PCAP
 	bool "PCAP Support"
 	depends on GENERIC_HARDIRQS && SPI_MASTER
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 6f8a9a1af20..f3b277b90d4 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
 
 obj-$(CONFIG_MFD_WM8400)	+= wm8400-core.o
+wm831x-objs			:= wm831x-core.o wm831x-irq.o wm831x-otp.o
+obj-$(CONFIG_MFD_WM831X)	+= wm831x.o
 wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
@@ -23,6 +25,9 @@ obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_MENELAUS)		+= menelaus.o
 
 obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
+obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
+
+obj-$(CONFIG_MFD_MC13783)	+= mc13783-core.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
@@ -44,3 +49,4 @@ obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
 obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
+obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 13e7d7bfe85..c533f86ff5e 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -14,7 +14,6 @@
 #include <linux/platform_device.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
-#include <linux/workqueue.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>
@@ -77,7 +76,7 @@ u8 ab3100_get_chip_type(struct ab3100 *ab3100)
 }
 EXPORT_SYMBOL(ab3100_get_chip_type);
 
-int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
+int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval)
 {
 	u8 regandval[2] = {reg, regval};
 	int err;
@@ -107,9 +106,10 @@ int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
 		err = 0;
 	}
 	mutex_unlock(&ab3100->access_mutex);
-	return 0;
+	return err;
 }
-EXPORT_SYMBOL(ab3100_set_register);
+EXPORT_SYMBOL(ab3100_set_register_interruptible);
+
 
 /*
  * The test registers exist at an I2C bus address up one
@@ -118,7 +118,7 @@ EXPORT_SYMBOL(ab3100_set_register);
  * anyway. It's currently only used from this file so declare
  * it static and do not export.
  */
-static int ab3100_set_test_register(struct ab3100 *ab3100,
+static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
 				    u8 reg, u8 regval)
 {
 	u8 regandval[2] = {reg, regval};
@@ -148,7 +148,8 @@ static int ab3100_set_test_register(struct ab3100 *ab3100,
 	return err;
 }
 
-int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
+
+int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval)
 {
 	int err;
 
@@ -202,9 +203,10 @@ int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_get_register);
+EXPORT_SYMBOL(ab3100_get_register_interruptible);
 
-int ab3100_get_register_page(struct ab3100 *ab3100,
+
+int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
 			     u8 first_reg, u8 *regvals, u8 numregs)
 {
 	int err;
@@ -258,9 +260,10 @@ int ab3100_get_register_page(struct ab3100 *ab3100,
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_get_register_page);
+EXPORT_SYMBOL(ab3100_get_register_page_interruptible);
+
 
-int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
 				 u8 reg, u8 andmask, u8 ormask)
 {
 	u8 regandval[2] = {reg, 0};
@@ -328,7 +331,8 @@ int ab3100_mask_and_set_register(struct ab3100 *ab3100,
 	mutex_unlock(&ab3100->access_mutex);
 	return err;
 }
-EXPORT_SYMBOL(ab3100_mask_and_set_register);
+EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible);
+
 
 /*
  * Register a simple callback for handling any AB3100 events.
@@ -371,7 +375,7 @@ static void ab3100_work(struct work_struct *work)
 	u32 fatevent;
 	int err;
 
-	err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
+	err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
 				       event_regs, 3);
 	if (err)
 		goto err_event_wq;
@@ -417,7 +421,7 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data)
 	 * stuff and we will re-enable the interrupts once th
 	 * worker has finished.
 	 */
-	disable_irq(ab3100->i2c_client->irq);
+	disable_irq_nosync(irq);
 	schedule_work(&ab3100->work);
 	return IRQ_HANDLED;
 }
@@ -435,7 +439,7 @@ static int ab3100_registers_print(struct seq_file *s, void *p)
 	seq_printf(s, "AB3100 registers:\n");
 
 	for (reg = 0; reg < 0xff; reg++) {
-		ab3100_get_register(ab3100, reg, &value);
+		ab3100_get_register_interruptible(ab3100, reg, &value);
 		seq_printf(s, "[0x%x]:  0x%x\n", reg, value);
 	}
 	return 0;
@@ -465,14 +469,14 @@ static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int ab3100_get_set_reg(struct file *file,
-			      const char __user *user_buf,
-			      size_t count, loff_t *ppos)
+static ssize_t ab3100_get_set_reg(struct file *file,
+				  const char __user *user_buf,
+				  size_t count, loff_t *ppos)
 {
 	struct ab3100_get_set_reg_priv *priv = file->private_data;
 	struct ab3100 *ab3100 = priv->ab3100;
 	char buf[32];
-	int buf_size;
+	ssize_t buf_size;
 	int regp;
 	unsigned long user_reg;
 	int err;
@@ -515,7 +519,7 @@ static int ab3100_get_set_reg(struct file *file,
 		u8 reg = (u8) user_reg;
 		u8 regvalue;
 
-		ab3100_get_register(ab3100, reg, &regvalue);
+		ab3100_get_register_interruptible(ab3100, reg, &regvalue);
 
 		dev_info(ab3100->dev,
 			 "debug read AB3100 reg[0x%02x]: 0x%02x\n",
@@ -547,8 +551,8 @@ static int ab3100_get_set_reg(struct file *file,
 			return -EINVAL;
 
 		value = (u8) user_value;
-		ab3100_set_register(ab3100, reg, value);
-		ab3100_get_register(ab3100, reg, &regvalue);
+		ab3100_set_register_interruptible(ab3100, reg, value);
+		ab3100_get_register_interruptible(ab3100, reg, &regvalue);
 
 		dev_info(ab3100->dev,
 			 "debug write reg[0x%02x] with 0x%02x, "
@@ -662,7 +666,7 @@ ab3100_init_settings[] = {
 		.setting = 0x01
 	}, {
 		.abreg = AB3100_IMRB1,
-		.setting = 0xFF
+		.setting = 0xBF
 	}, {
 		.abreg = AB3100_IMRB2,
 		.setting = 0xFF
@@ -696,7 +700,7 @@ static int __init ab3100_setup(struct ab3100 *ab3100)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
-		err = ab3100_set_register(ab3100,
+		err = ab3100_set_register_interruptible(ab3100,
 					  ab3100_init_settings[i].abreg,
 					  ab3100_init_settings[i].setting);
 		if (err)
@@ -705,14 +709,14 @@ static int __init ab3100_setup(struct ab3100 *ab3100)
 
 	/*
 	 * Special trick to make the AB3100 use the 32kHz clock (RTC)
-	 * bit 3 in test registe 0x02 is a special, undocumented test
+	 * bit 3 in test register 0x02 is a special, undocumented test
 	 * register bit that only exist in AB3100 P1E
 	 */
 	if (ab3100->chip_id == 0xc4) {
 		dev_warn(ab3100->dev,
 			 "AB3100 P1E variant detected, "
 			 "forcing chip to 32KHz\n");
-		err = ab3100_set_test_register(ab3100, 0x02, 0x08);
+		err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08);
 	}
 
  exit_no_setup:
@@ -833,6 +837,8 @@ static int __init ab3100_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct ab3100 *ab3100;
+	struct ab3100_platform_data *ab3100_plf_data =
+		client->dev.platform_data;
 	int err;
 	int i;
 
@@ -852,8 +858,8 @@ static int __init ab3100_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, ab3100);
 
 	/* Read chip ID register */
-	err = ab3100_get_register(ab3100, AB3100_CID,
-				  &ab3100->chip_id);
+	err = ab3100_get_register_interruptible(ab3100, AB3100_CID,
+						&ab3100->chip_id);
 	if (err) {
 		dev_err(&client->dev,
 			"could not communicate with the AB3100 analog "
@@ -916,6 +922,8 @@ static int __init ab3100_probe(struct i2c_client *client,
 	for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
 		ab3100_platform_devs[i]->dev.parent =
 			&client->dev;
+		ab3100_platform_devs[i]->dev.platform_data =
+			ab3100_plf_data;
 		platform_set_drvdata(ab3100_platform_devs[i], ab3100);
 	}
 
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
new file mode 100644
index 00000000000..0499b2031a2
--- /dev/null
+++ b/drivers/mfd/ab3100-otp.c
@@ -0,0 +1,268 @@
+/*
+ * drivers/mfd/ab3100_otp.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Driver to read out OTP from the AB3100 Mixed-signal circuit
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/debugfs.h>
+
+/* The OTP registers */
+#define AB3100_OTP0		0xb0
+#define AB3100_OTP1		0xb1
+#define AB3100_OTP2		0xb2
+#define AB3100_OTP3		0xb3
+#define AB3100_OTP4		0xb4
+#define AB3100_OTP5		0xb5
+#define AB3100_OTP6		0xb6
+#define AB3100_OTP7		0xb7
+#define AB3100_OTPP		0xbf
+
+/**
+ * struct ab3100_otp
+ * @dev containing device
+ * @ab3100 a pointer to the parent ab3100 device struct
+ * @locked whether the OTP is locked, after locking, no more bits
+ *       can be changed but before locking it is still possible
+ *       to change bits from 1->0.
+ * @freq clocking frequency for the OTP, this frequency is either
+ *       32768Hz or 1MHz/30
+ * @paf product activation flag, indicates whether this is a real
+ *       product (paf true) or a lab board etc (paf false)
+ * @imeich if this is set it is possible to override the
+ *       IMEI number found in the tac, fac and svn fields with
+ *       (secured) software
+ * @cid customer ID
+ * @tac type allocation code of the IMEI
+ * @fac final assembly code of the IMEI
+ * @svn software version number of the IMEI
+ * @debugfs a debugfs file used when dumping to file
+ */
+struct ab3100_otp {
+	struct device *dev;
+	struct ab3100 *ab3100;
+	bool locked;
+	u32 freq;
+	bool paf;
+	bool imeich;
+	u16 cid:14;
+	u32 tac:20;
+	u8 fac;
+	u32 svn:20;
+	struct dentry *debugfs;
+};
+
+static int __init ab3100_otp_read(struct ab3100_otp *otp)
+{
+	struct ab3100 *ab = otp->ab3100;
+	u8 otpval[8];
+	u8 otpp;
+	int err;
+
+	err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp);
+	if (err) {
+		dev_err(otp->dev, "unable to read OTPP register\n");
+		return err;
+	}
+
+	err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0,
+						     otpval, 8);
+	if (err) {
+		dev_err(otp->dev, "unable to read OTP register page\n");
+		return err;
+	}
+
+	/* Cache OTP properties, they never change by nature */
+	otp->locked = (otpp & 0x80);
+	otp->freq = (otpp & 0x40) ? 32768 : 34100;
+	otp->paf = (otpval[1] & 0x80);
+	otp->imeich = (otpval[1] & 0x40);
+	otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff;
+	otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2];
+	otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4);
+	otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4);
+	return 0;
+}
+
+/*
+ * This is a simple debugfs human-readable file that dumps out
+ * the contents of the OTP.
+ */
+#ifdef CONFIG_DEBUGFS
+static int show_otp(struct seq_file *s, void *v)
+{
+	struct ab3100_otp *otp = s->private;
+	int err;
+
+	seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED");
+	seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq);
+	seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET");
+	seq_printf(s, "IMEI is %s\n", otp->imeich ?
+		   "CHANGEABLE" : "NOT CHANGEABLE");
+	seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid);
+	seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn);
+	return 0;
+}
+
+static int ab3100_otp_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab3100_otp_show, inode->i_private);
+}
+
+static const struct file_operations ab3100_otp_operations = {
+	.open		= ab3100_otp_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init ab3100_otp_init_debugfs(struct device *dev,
+					  struct ab3100_otp *otp)
+{
+	otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO,
+					   NULL, otp,
+					   &ab3100_otp_operations);
+	if (!otp->debugfs) {
+		dev_err(dev, "AB3100 debugfs OTP file registration failed!\n");
+		return err;
+	}
+}
+
+static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
+{
+	debugfs_remove_file(otp->debugfs);
+}
+#else
+/* Compile this out if debugfs not selected */
+static inline int __init ab3100_otp_init_debugfs(struct device *dev,
+						 struct ab3100_otp *otp)
+{
+	return 0;
+}
+
+static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
+{
+}
+#endif
+
+#define SHOW_AB3100_ATTR(name) \
+static ssize_t ab3100_otp_##name##_show(struct device *dev, \
+			       struct device_attribute *attr, \
+			       char *buf) \
+{\
+	struct ab3100_otp *otp = dev_get_drvdata(dev); \
+	return sprintf(buf, "%u\n", otp->name); \
+}
+
+SHOW_AB3100_ATTR(locked)
+SHOW_AB3100_ATTR(freq)
+SHOW_AB3100_ATTR(paf)
+SHOW_AB3100_ATTR(imeich)
+SHOW_AB3100_ATTR(cid)
+SHOW_AB3100_ATTR(fac)
+SHOW_AB3100_ATTR(tac)
+SHOW_AB3100_ATTR(svn)
+
+static struct device_attribute ab3100_otp_attrs[] = {
+	__ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL),
+	__ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL),
+	__ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL),
+	__ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL),
+	__ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL),
+	__ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL),
+	__ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL),
+	__ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL),
+};
+
+static int __init ab3100_otp_probe(struct platform_device *pdev)
+{
+	struct ab3100_otp *otp;
+	int err = 0;
+	int i;
+
+	otp = kzalloc(sizeof(struct ab3100_otp), GFP_KERNEL);
+	if (!otp) {
+		dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");
+		return -ENOMEM;
+	}
+	otp->dev = &pdev->dev;
+
+	/* Replace platform data coming in with a local struct */
+	otp->ab3100 = platform_get_drvdata(pdev);
+	platform_set_drvdata(pdev, otp);
+
+	err = ab3100_otp_read(otp);
+	if (err)
+		return err;
+
+	dev_info(&pdev->dev, "AB3100 OTP readout registered\n");
+
+	/* sysfs entries */
+	for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) {
+		err = device_create_file(&pdev->dev,
+					 &ab3100_otp_attrs[i]);
+		if (err)
+			goto out_no_sysfs;
+	}
+
+	/* debugfs entries */
+	err = ab3100_otp_init_debugfs(&pdev->dev, otp);
+	if (err)
+		goto out_no_debugfs;
+
+	return 0;
+
+out_no_sysfs:
+	for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
+		device_remove_file(&pdev->dev,
+				   &ab3100_otp_attrs[i]);
+out_no_debugfs:
+	kfree(otp);
+	return err;
+}
+
+static int __exit ab3100_otp_remove(struct platform_device *pdev)
+{
+	struct ab3100_otp *otp = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
+		device_remove_file(&pdev->dev,
+				   &ab3100_otp_attrs[i]);
+	ab3100_otp_exit_debugfs(otp);
+	kfree(otp);
+	return 0;
+}
+
+static struct platform_driver ab3100_otp_driver = {
+	.driver = {
+		.name = "ab3100-otp",
+		.owner = THIS_MODULE,
+	},
+	.remove	 = __exit_p(ab3100_otp_remove),
+};
+
+static int __init ab3100_otp_init(void)
+{
+	return platform_driver_probe(&ab3100_otp_driver,
+				     ab3100_otp_probe);
+}
+
+static void __exit ab3100_otp_exit(void)
+{
+	platform_driver_unregister(&ab3100_otp_driver);
+}
+
+module_init(ab3100_otp_init);
+module_exit(ab3100_otp_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 OTP Readout Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 5b6e58a3ba4..3d4a861976c 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -107,8 +107,16 @@ static const u8 msp_gpios[] = {
 	MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
 	MSP_GPIO(4, SWITCH1),
 	/* switches on MMC/SD sockets */
-	MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC),	/* mmc0 WP, nCD */
-	MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC),	/* mmc1 WP, nCD */
+	/*
+	 * Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be
+	 * checked for card detection. However on the EVM bit 1 and 3 gives
+	 * this status, for 0 and 1 instance respectively. The pdf also
+	 * suggests that Bit 1 and 3 should be checked for write protection.
+	 * However on the EVM bit 2 and 4 gives this status,for 0 and 1
+	 * instance respectively.
+	 */
+	MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC),	/* mmc0 WP, nCD */
+	MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC),	/* mmc1 WP, nCD */
 };
 
 #define MSP_GPIO_REG(offset)	(msp_gpios[(offset)] >> 3)
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index c1de4afa89a..016be4938e4 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/mfd/ezx-pcap.h>
 #include <linux/spi/spi.h>
+#include <linux/gpio.h>
 
 #define PCAP_ADC_MAXQ		8
 struct pcap_adc_request {
@@ -106,11 +107,35 @@ int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value)
 }
 EXPORT_SYMBOL_GPL(ezx_pcap_read);
 
+int ezx_pcap_set_bits(struct pcap_chip *pcap, u8 reg_num, u32 mask, u32 val)
+{
+	int ret;
+	u32 tmp = PCAP_REGISTER_READ_OP_BIT |
+		(reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
+
+	mutex_lock(&pcap->io_mutex);
+	ret = ezx_pcap_putget(pcap, &tmp);
+	if (ret)
+		goto out_unlock;
+
+	tmp &= (PCAP_REGISTER_VALUE_MASK & ~mask);
+	tmp |= (val & mask) | PCAP_REGISTER_WRITE_OP_BIT |
+		(reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
+
+	ret = ezx_pcap_putget(pcap, &tmp);
+out_unlock:
+	mutex_unlock(&pcap->io_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ezx_pcap_set_bits);
+
 /* IRQ */
-static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq)
+int irq_to_pcap(struct pcap_chip *pcap, int irq)
 {
-	return 1 << (irq - pcap->irq_base);
+	return irq - pcap->irq_base;
 }
+EXPORT_SYMBOL_GPL(irq_to_pcap);
 
 int pcap_to_irq(struct pcap_chip *pcap, int irq)
 {
@@ -122,7 +147,7 @@ static void pcap_mask_irq(unsigned int irq)
 {
 	struct pcap_chip *pcap = get_irq_chip_data(irq);
 
-	pcap->msr |= irq2pcap(pcap, irq);
+	pcap->msr |= 1 << irq_to_pcap(pcap, irq);
 	queue_work(pcap->workqueue, &pcap->msr_work);
 }
 
@@ -130,7 +155,7 @@ static void pcap_unmask_irq(unsigned int irq)
 {
 	struct pcap_chip *pcap = get_irq_chip_data(irq);
 
-	pcap->msr &= ~irq2pcap(pcap, irq);
+	pcap->msr &= ~(1 << irq_to_pcap(pcap, irq));
 	queue_work(pcap->workqueue, &pcap->msr_work);
 }
 
@@ -154,34 +179,38 @@ static void pcap_isr_work(struct work_struct *work)
 	u32 msr, isr, int_sel, service;
 	int irq;
 
-	ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
-	ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
+	do {
+		ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
+		ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
 
-	/* We cant service/ack irqs that are assigned to port 2 */
-	if (!(pdata->config & PCAP_SECOND_PORT)) {
-		ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
-		isr &= ~int_sel;
-	}
-	ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
+		/* We cant service/ack irqs that are assigned to port 2 */
+		if (!(pdata->config & PCAP_SECOND_PORT)) {
+			ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
+			isr &= ~int_sel;
+		}
 
-	local_irq_disable();
-	service = isr & ~msr;
+		ezx_pcap_write(pcap, PCAP_REG_MSR, isr | msr);
+		ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
 
-	for (irq = pcap->irq_base; service; service >>= 1, irq++) {
-		if (service & 1) {
-			struct irq_desc *desc = irq_to_desc(irq);
+		local_irq_disable();
+		service = isr & ~msr;
+		for (irq = pcap->irq_base; service; service >>= 1, irq++) {
+			if (service & 1) {
+				struct irq_desc *desc = irq_to_desc(irq);
 
-			if (WARN(!desc, KERN_WARNING
-					"Invalid PCAP IRQ %d\n", irq))
-				break;
+				if (WARN(!desc, KERN_WARNING
+						"Invalid PCAP IRQ %d\n", irq))
+					break;
 
-			if (desc->status & IRQ_DISABLED)
-				note_interrupt(irq, desc, IRQ_NONE);
-			else
-				desc->handle_irq(irq, desc);
+				if (desc->status & IRQ_DISABLED)
+					note_interrupt(irq, desc, IRQ_NONE);
+				else
+					desc->handle_irq(irq, desc);
+			}
 		}
-	}
-	local_irq_enable();
+		local_irq_enable();
+		ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr);
+	} while (gpio_get_value(irq_to_gpio(pcap->spi->irq)));
 }
 
 static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -194,6 +223,19 @@ static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
 }
 
 /* ADC */
+void pcap_set_ts_bits(struct pcap_chip *pcap, u32 bits)
+{
+	u32 tmp;
+
+	mutex_lock(&pcap->adc_mutex);
+	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
+	tmp &= ~(PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
+	tmp |= bits & (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
+	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+	mutex_unlock(&pcap->adc_mutex);
+}
+EXPORT_SYMBOL_GPL(pcap_set_ts_bits);
+
 static void pcap_disable_adc(struct pcap_chip *pcap)
 {
 	u32 tmp;
@@ -216,15 +258,16 @@ static void pcap_adc_trigger(struct pcap_chip *pcap)
 		mutex_unlock(&pcap->adc_mutex);
 		return;
 	}
-	mutex_unlock(&pcap->adc_mutex);
-
-	/* start conversion on requested bank */
-	tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
+	/* start conversion on requested bank, save TS_M bits */
+	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
+	tmp &= (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR);
+	tmp |= pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
 
 	if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1)
 		tmp |= PCAP_ADC_AD_SEL1;
 
 	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+	mutex_unlock(&pcap->adc_mutex);
 	ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC);
 }
 
@@ -499,7 +542,7 @@ static void __exit ezx_pcap_exit(void)
 	spi_unregister_driver(&ezxpcap_driver);
 }
 
-module_init(ezx_pcap_init);
+subsys_initcall(ezx_pcap_init);
 module_exit(ezx_pcap_exit);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c
new file mode 100644
index 00000000000..e354d2912ef
--- /dev/null
+++ b/drivers/mfd/mc13783-core.c
@@ -0,0 +1,427 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This code is in parts based on wm8350-core.c and pcf50633-core.c
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/mfd/mc13783-private.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/spi/spi.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+
+#define MC13783_MAX_REG_NUM	0x3f
+#define MC13783_FRAME_MASK	0x00ffffff
+#define MC13783_MAX_REG_NUM	0x3f
+#define MC13783_REG_NUM_SHIFT	0x19
+#define MC13783_WRITE_BIT_SHIFT	31
+
+static inline int spi_rw(struct spi_device *spi, u8 * buf, size_t len)
+{
+	struct spi_transfer t = {
+		.tx_buf = (const void *)buf,
+		.rx_buf = buf,
+		.len = len,
+		.cs_change = 0,
+		.delay_usecs = 0,
+	};
+	struct spi_message m;
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+	if (spi_sync(spi, &m) != 0 || m.status != 0)
+		return -EINVAL;
+	return len - m.actual_length;
+}
+
+static int mc13783_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val)
+{
+	unsigned int frame = 0;
+	int ret = 0;
+
+	if (reg_num > MC13783_MAX_REG_NUM)
+		return -EINVAL;
+
+	frame |= reg_num << MC13783_REG_NUM_SHIFT;
+
+	ret = spi_rw(mc13783->spi_device, (u8 *)&frame, 4);
+
+	*reg_val = frame & MC13783_FRAME_MASK;
+
+	return ret;
+}
+
+static int mc13783_write(struct mc13783 *mc13783, int reg_num, u32 reg_val)
+{
+	unsigned int frame = 0;
+
+	if (reg_num > MC13783_MAX_REG_NUM)
+		return -EINVAL;
+
+	frame |= (1 << MC13783_WRITE_BIT_SHIFT);
+	frame |= reg_num << MC13783_REG_NUM_SHIFT;
+	frame |= reg_val & MC13783_FRAME_MASK;
+
+	return spi_rw(mc13783->spi_device, (u8 *)&frame, 4);
+}
+
+int mc13783_reg_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val)
+{
+	int ret;
+
+	mutex_lock(&mc13783->io_lock);
+	ret = mc13783_read(mc13783, reg_num, reg_val);
+	mutex_unlock(&mc13783->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mc13783_reg_read);
+
+int mc13783_reg_write(struct mc13783 *mc13783, int reg_num, u32 reg_val)
+{
+	int ret;
+
+	mutex_lock(&mc13783->io_lock);
+	ret = mc13783_write(mc13783, reg_num, reg_val);
+	mutex_unlock(&mc13783->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mc13783_reg_write);
+
+/**
+ * mc13783_set_bits - Bitmask write
+ *
+ * @mc13783: Pointer to mc13783 control structure
+ * @reg:    Register to access
+ * @mask:   Mask of bits to change
+ * @val:    Value to set for masked bits
+ */
+int mc13783_set_bits(struct mc13783 *mc13783, int reg, u32 mask, u32 val)
+{
+	u32 tmp;
+	int ret;
+
+	mutex_lock(&mc13783->io_lock);
+
+	ret = mc13783_read(mc13783, reg, &tmp);
+	tmp = (tmp & ~mask) | val;
+	if (ret == 0)
+		ret = mc13783_write(mc13783, reg, tmp);
+
+	mutex_unlock(&mc13783->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mc13783_set_bits);
+
+int mc13783_register_irq(struct mc13783 *mc13783, int irq,
+		void (*handler) (int, void *), void *data)
+{
+	if (irq < 0 || irq > MC13783_NUM_IRQ || !handler)
+		return -EINVAL;
+
+	if (WARN_ON(mc13783->irq_handler[irq].handler))
+		return -EBUSY;
+
+	mutex_lock(&mc13783->io_lock);
+	mc13783->irq_handler[irq].handler = handler;
+	mc13783->irq_handler[irq].data = data;
+	mutex_unlock(&mc13783->io_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mc13783_register_irq);
+
+int mc13783_free_irq(struct mc13783 *mc13783, int irq)
+{
+	if (irq < 0 || irq > MC13783_NUM_IRQ)
+		return -EINVAL;
+
+	mutex_lock(&mc13783->io_lock);
+	mc13783->irq_handler[irq].handler = NULL;
+	mutex_unlock(&mc13783->io_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mc13783_free_irq);
+
+static void mc13783_irq_work(struct work_struct *work)
+{
+	struct mc13783 *mc13783 = container_of(work, struct mc13783, work);
+	int i;
+	unsigned int adc_sts;
+
+	/* check if the adc has finished any completion */
+	mc13783_reg_read(mc13783, MC13783_REG_INTERRUPT_STATUS_0, &adc_sts);
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0,
+			adc_sts & MC13783_INT_STAT_ADCDONEI);
+
+	if (adc_sts & MC13783_INT_STAT_ADCDONEI)
+		complete_all(&mc13783->adc_done);
+
+	for (i = 0; i < MC13783_NUM_IRQ; i++)
+		if (mc13783->irq_handler[i].handler)
+			mc13783->irq_handler[i].handler(i,
+					mc13783->irq_handler[i].data);
+	enable_irq(mc13783->irq);
+}
+
+static irqreturn_t mc13783_interrupt(int irq, void *dev_id)
+{
+	struct mc13783 *mc13783 = dev_id;
+
+	disable_irq_nosync(irq);
+
+	schedule_work(&mc13783->work);
+	return IRQ_HANDLED;
+}
+
+/* set adc to ts interrupt mode, which generates touchscreen wakeup interrupt */
+static inline void mc13783_adc_set_ts_irq_mode(struct mc13783 *mc13783)
+{
+	unsigned int reg_adc0, reg_adc1;
+
+	reg_adc0 = MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE
+			| MC13783_ADC0_TSMOD0;
+	reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN;
+
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0);
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1);
+}
+
+int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
+		unsigned int channel, unsigned int *sample)
+{
+	unsigned int reg_adc0, reg_adc1;
+	int i;
+
+	mutex_lock(&mc13783->adc_conv_lock);
+
+	/* set up auto incrementing anyway to make quick read */
+	reg_adc0 =  MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
+	/* enable the adc, ignore external triggering and set ASC to trigger
+	 * conversion */
+	reg_adc1 =  MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN
+		| MC13783_ADC1_ASC;
+
+	/* setup channel number */
+	if (channel > 7)
+		reg_adc1 |= MC13783_ADC1_ADSEL;
+
+	switch (mode) {
+	case MC13783_ADC_MODE_TS:
+		/* enables touch screen reference mode and set touchscreen mode
+		 * to position mode */
+		reg_adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE
+			| MC13783_ADC0_TSMOD0 | MC13783_ADC0_TSMOD1;
+		reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+		break;
+	case MC13783_ADC_MODE_SINGLE_CHAN:
+		reg_adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT;
+		reg_adc1 |= MC13783_ADC1_RAND;
+		break;
+	case MC13783_ADC_MODE_MULT_CHAN:
+		reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0);
+	mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1);
+
+	wait_for_completion_interruptible(&mc13783->adc_done);
+
+	for (i = 0; i < 4; i++)
+		mc13783_reg_read(mc13783, MC13783_REG_ADC_2, &sample[i]);
+
+	if (mc13783->ts_active)
+		mc13783_adc_set_ts_irq_mode(mc13783);
+
+	mutex_unlock(&mc13783->adc_conv_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion);
+
+void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status)
+{
+	mc13783->ts_active = status;
+}
+EXPORT_SYMBOL_GPL(mc13783_adc_set_ts_status);
+
+static int mc13783_check_revision(struct mc13783 *mc13783)
+{
+	u32 rev_id, rev1, rev2, finid, icid;
+
+	mc13783_read(mc13783, MC13783_REG_REVISION, &rev_id);
+
+	rev1 = (rev_id & 0x018) >> 3;
+	rev2 = (rev_id & 0x007);
+	icid = (rev_id & 0x01C0) >> 6;
+	finid = (rev_id & 0x01E00) >> 9;
+
+	/* Ver 0.2 is actually 3.2a.  Report as 3.2 */
+	if ((rev1 == 0) && (rev2 == 2))
+		rev1 = 3;
+
+	if (rev1 == 0 || icid != 2) {
+		dev_err(mc13783->dev, "No MC13783 detected.\n");
+		return -ENODEV;
+	}
+
+	mc13783->revision = ((rev1 * 10) + rev2);
+	dev_info(mc13783->dev, "MC13783 Rev %d.%d FinVer %x detected\n", rev1,
+	       rev2, finid);
+
+	return 0;
+}
+
+/*
+ * Register a client device.  This is non-fatal since there is no need to
+ * fail the entire device init due to a single platform device failing.
+ */
+static void mc13783_client_dev_register(struct mc13783 *mc13783,
+				       const char *name)
+{
+	struct mfd_cell cell = {};
+
+	cell.name = name;
+
+	mfd_add_devices(mc13783->dev, -1, &cell, 1, NULL, 0);
+}
+
+static int __devinit mc13783_probe(struct spi_device *spi)
+{
+	struct mc13783 *mc13783;
+	struct mc13783_platform_data *pdata = spi->dev.platform_data;
+	int ret;
+
+	mc13783 = kzalloc(sizeof(struct mc13783), GFP_KERNEL);
+	if (!mc13783)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, mc13783);
+	spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
+	spi->bits_per_word = 32;
+	spi_setup(spi);
+
+	mc13783->spi_device = spi;
+	mc13783->dev = &spi->dev;
+	mc13783->irq = spi->irq;
+
+	INIT_WORK(&mc13783->work, mc13783_irq_work);
+	mutex_init(&mc13783->io_lock);
+	mutex_init(&mc13783->adc_conv_lock);
+	init_completion(&mc13783->adc_done);
+
+	if (pdata) {
+		mc13783->flags = pdata->flags;
+		mc13783->regulators = pdata->regulators;
+		mc13783->num_regulators = pdata->num_regulators;
+	}
+
+	if (mc13783_check_revision(mc13783)) {
+		ret = -ENODEV;
+		goto err_out;
+	}
+
+	/* clear and mask all interrupts */
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, 0x00ffffff);
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_0, 0x00ffffff);
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_1, 0x00ffffff);
+	mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_1, 0x00ffffff);
+
+	/* unmask adcdone interrupts */
+	mc13783_set_bits(mc13783, MC13783_REG_INTERRUPT_MASK_0,
+			MC13783_INT_MASK_ADCDONEM, 0);
+
+	ret = request_irq(mc13783->irq, mc13783_interrupt,
+			IRQF_DISABLED | IRQF_TRIGGER_HIGH, "mc13783",
+			mc13783);
+	if (ret)
+		goto err_out;
+
+	if (mc13783->flags & MC13783_USE_CODEC)
+		mc13783_client_dev_register(mc13783, "mc13783-codec");
+	if (mc13783->flags & MC13783_USE_ADC)
+		mc13783_client_dev_register(mc13783, "mc13783-adc");
+	if (mc13783->flags & MC13783_USE_RTC)
+		mc13783_client_dev_register(mc13783, "mc13783-rtc");
+	if (mc13783->flags & MC13783_USE_REGULATOR)
+		mc13783_client_dev_register(mc13783, "mc13783-regulator");
+	if (mc13783->flags & MC13783_USE_TOUCHSCREEN)
+		mc13783_client_dev_register(mc13783, "mc13783-ts");
+
+	return 0;
+
+err_out:
+	kfree(mc13783);
+	return ret;
+}
+
+static int __devexit mc13783_remove(struct spi_device *spi)
+{
+	struct mc13783 *mc13783;
+
+	mc13783 = dev_get_drvdata(&spi->dev);
+
+	free_irq(mc13783->irq, mc13783);
+
+	mfd_remove_devices(&spi->dev);
+
+	return 0;
+}
+
+static struct spi_driver pmic_driver = {
+	.driver = {
+		   .name = "mc13783",
+		   .bus = &spi_bus_type,
+		   .owner = THIS_MODULE,
+	},
+	.probe = mc13783_probe,
+	.remove = __devexit_p(mc13783_remove),
+};
+
+static int __init pmic_init(void)
+{
+	return spi_register_driver(&pmic_driver);
+}
+subsys_initcall(pmic_init);
+
+static void __exit pmic_exit(void)
+{
+	spi_unregister_driver(&pmic_driver);
+}
+module_exit(pmic_exit);
+
+MODULE_DESCRIPTION("Core/Protocol driver for Freescale MC13783 PMIC");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 54ddf3772e0..ae15e495e20 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -25,7 +25,7 @@ static int mfd_add_device(struct device *parent, int id,
 	int ret = -ENOMEM;
 	int r;
 
-	pdev = platform_device_alloc(cell->name, id);
+	pdev = platform_device_alloc(cell->name, id + cell->id);
 	if (!pdev)
 		goto fail_alloc;
 
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index c2d05becfa9..3d31e97d6a4 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -73,15 +73,10 @@ static void trigger_next_adc_job_if_any(struct pcf50633 *pcf)
 	struct pcf50633_adc *adc = __to_adc(pcf);
 	int head;
 
-	mutex_lock(&adc->queue_mutex);
-
 	head = adc->queue_head;
 
-	if (!adc->queue[head]) {
-		mutex_unlock(&adc->queue_mutex);
+	if (!adc->queue[head])
 		return;
-	}
-	mutex_unlock(&adc->queue_mutex);
 
 	adc_setup(pcf, adc->queue[head]->mux, adc->queue[head]->avg);
 }
@@ -99,16 +94,17 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
 
 	if (adc->queue[tail]) {
 		mutex_unlock(&adc->queue_mutex);
+		dev_err(pcf->dev, "ADC queue is full, dropping request\n");
 		return -EBUSY;
 	}
 
 	adc->queue[tail] = req;
+	if (head == tail)
+		trigger_next_adc_job_if_any(pcf);
 	adc->queue_tail = (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
 
 	mutex_unlock(&adc->queue_mutex);
 
-	trigger_next_adc_job_if_any(pcf);
-
 	return 0;
 }
 
@@ -124,6 +120,7 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
 int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
 {
 	struct pcf50633_adc_request *req;
+	int err;
 
 	/* req is freed when the result is ready, in interrupt handler */
 	req = kzalloc(sizeof(*req), GFP_KERNEL);
@@ -136,9 +133,13 @@ int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
 	req->callback_param = req;
 
 	init_completion(&req->completion);
-	adc_enqueue_request(pcf, req);
+	err = adc_enqueue_request(pcf, req);
+	if (err)
+		return err;
+
 	wait_for_completion(&req->completion);
 
+	/* FIXME by this time req might be already freed */
 	return req->result;
 }
 EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read);
@@ -159,9 +160,7 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
 	req->callback = callback;
 	req->callback_param = callback_param;
 
-	adc_enqueue_request(pcf, req);
-
-	return 0;
+	return adc_enqueue_request(pcf, req);
 }
 EXPORT_SYMBOL_GPL(pcf50633_adc_async_read);
 
@@ -184,7 +183,7 @@ static void pcf50633_adc_irq(int irq, void *data)
 	struct pcf50633_adc *adc = data;
 	struct pcf50633 *pcf = adc->pcf;
 	struct pcf50633_adc_request *req;
-	int head;
+	int head, res;
 
 	mutex_lock(&adc->queue_mutex);
 	head = adc->queue_head;
@@ -199,12 +198,13 @@ static void pcf50633_adc_irq(int irq, void *data)
 	adc->queue_head = (head + 1) &
 				      (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
 
+	res = adc_result(pcf);
+	trigger_next_adc_job_if_any(pcf);
+
 	mutex_unlock(&adc->queue_mutex);
 
-	req->callback(pcf, req->callback_param, adc_result(pcf));
+	req->callback(pcf, req->callback_param, res);
 	kfree(req);
-
-	trigger_next_adc_job_if_any(pcf);
 }
 
 static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 8d3c38bf971..d26d7747175 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -444,7 +444,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data)
 
 	get_device(pcf->dev);
 	disable_irq_nosync(pcf->irq);
-	schedule_work(&pcf->irq_work);
+	queue_work(pcf->work_queue, &pcf->irq_work);
 
 	return IRQ_HANDLED;
 }
@@ -575,6 +575,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	pcf->dev = &client->dev;
 	pcf->i2c_client = client;
 	pcf->irq = client->irq;
+	pcf->work_queue = create_singlethread_workqueue("pcf50633");
 
 	INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
 
@@ -651,6 +652,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
 	return 0;
 
 err:
+	destroy_workqueue(pcf->work_queue);
 	kfree(pcf);
 	return ret;
 }
@@ -661,6 +663,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client)
 	int i;
 
 	free_irq(pcf->irq, pcf);
+	destroy_workqueue(pcf->work_queue);
 
 	platform_device_unregister(pcf->input_pdev);
 	platform_device_unregister(pcf->rtc_pdev);
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index ca54996ffd0..e424cf6d8e9 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -89,6 +89,12 @@
 #define twl_has_madc()	false
 #endif
 
+#ifdef CONFIG_TWL4030_POWER
+#define twl_has_power()        true
+#else
+#define twl_has_power()        false
+#endif
+
 #if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
 #define twl_has_rtc()	true
 #else
@@ -115,6 +121,12 @@
 
 #define TWL4030_NUM_SLAVES		4
 
+#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
+	|| defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE)
+#define twl_has_pwrbutton()	true
+#else
+#define twl_has_pwrbutton()	false
+#endif
 
 /* Base Address defns for twl4030_map[] */
 
@@ -538,6 +550,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 	}
 
+	if (twl_has_pwrbutton()) {
+		child = add_child(1, "twl4030_pwrbutton",
+				NULL, 0, true, pdata->irq_base + 8 + 0, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
 	if (twl_has_regulator()) {
 		/*
 		child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
@@ -788,6 +807,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	/* setup clock framework */
 	clocks_init(&client->dev);
 
+	/* load power event scripts */
+	if (twl_has_power() && pdata->power)
+		twl4030_power_init(pdata->power);
+
 	/* Maybe init the T2 Interrupt subsystem */
 	if (client->irq
 			&& pdata->irq_base
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 7d430835655..fb194fe244c 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -424,7 +424,7 @@ static void twl4030_sih_do_edge(struct work_struct *work)
 	/* see what work we have */
 	spin_lock_irq(&sih_agent_lock);
 	edge_change = agent->edge_change;
-	agent->edge_change = 0;;
+	agent->edge_change = 0;
 	sih = edge_change ? agent->sih : NULL;
 	spin_unlock_irq(&sih_agent_lock);
 	if (!sih)
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
new file mode 100644
index 00000000000..d423e0c4176
--- /dev/null
+++ b/drivers/mfd/twl4030-power.c
@@ -0,0 +1,472 @@
+/*
+ * linux/drivers/i2c/chips/twl4030-power.c
+ *
+ * Handle TWL4030 Power initialization
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2006 Texas Instruments, Inc
+ *
+ * Written by 	Kalle Jokiniemi
+ *		Peter De Schrijver <peter.de-schrijver@nokia.com>
+ * Several fixes by Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+static u8 twl4030_start_script_address = 0x2b;
+
+#define PWR_P1_SW_EVENTS	0x10
+#define PWR_DEVOFF	(1<<0)
+
+#define PHY_TO_OFF_PM_MASTER(p)		(p - 0x36)
+#define PHY_TO_OFF_PM_RECEIVER(p)	(p - 0x5b)
+
+/* resource - hfclk */
+#define R_HFCLKOUT_DEV_GRP 	PHY_TO_OFF_PM_RECEIVER(0xe6)
+
+/* PM events */
+#define R_P1_SW_EVENTS		PHY_TO_OFF_PM_MASTER(0x46)
+#define R_P2_SW_EVENTS		PHY_TO_OFF_PM_MASTER(0x47)
+#define R_P3_SW_EVENTS		PHY_TO_OFF_PM_MASTER(0x48)
+#define R_CFG_P1_TRANSITION	PHY_TO_OFF_PM_MASTER(0x36)
+#define R_CFG_P2_TRANSITION	PHY_TO_OFF_PM_MASTER(0x37)
+#define R_CFG_P3_TRANSITION	PHY_TO_OFF_PM_MASTER(0x38)
+
+#define LVL_WAKEUP	0x08
+
+#define ENABLE_WARMRESET (1<<4)
+
+#define END_OF_SCRIPT		0x3f
+
+#define R_SEQ_ADD_A2S		PHY_TO_OFF_PM_MASTER(0x55)
+#define R_SEQ_ADD_S2A12		PHY_TO_OFF_PM_MASTER(0x56)
+#define	R_SEQ_ADD_S2A3		PHY_TO_OFF_PM_MASTER(0x57)
+#define	R_SEQ_ADD_WARM		PHY_TO_OFF_PM_MASTER(0x58)
+#define R_MEMORY_ADDRESS	PHY_TO_OFF_PM_MASTER(0x59)
+#define R_MEMORY_DATA		PHY_TO_OFF_PM_MASTER(0x5a)
+
+#define R_PROTECT_KEY		0x0E
+#define R_KEY_1			0xC0
+#define R_KEY_2			0x0C
+
+/* resource configuration registers */
+
+#define DEVGROUP_OFFSET		0
+#define TYPE_OFFSET		1
+
+/* Bit positions */
+#define DEVGROUP_SHIFT		5
+#define DEVGROUP_MASK		(7 << DEVGROUP_SHIFT)
+#define TYPE_SHIFT		0
+#define TYPE_MASK		(7 << TYPE_SHIFT)
+#define TYPE2_SHIFT		3
+#define TYPE2_MASK		(3 << TYPE2_SHIFT)
+
+static u8 res_config_addrs[] = {
+	[RES_VAUX1]	= 0x17,
+	[RES_VAUX2]	= 0x1b,
+	[RES_VAUX3]	= 0x1f,
+	[RES_VAUX4]	= 0x23,
+	[RES_VMMC1]	= 0x27,
+	[RES_VMMC2]	= 0x2b,
+	[RES_VPLL1]	= 0x2f,
+	[RES_VPLL2]	= 0x33,
+	[RES_VSIM]	= 0x37,
+	[RES_VDAC]	= 0x3b,
+	[RES_VINTANA1]	= 0x3f,
+	[RES_VINTANA2]	= 0x43,
+	[RES_VINTDIG]	= 0x47,
+	[RES_VIO]	= 0x4b,
+	[RES_VDD1]	= 0x55,
+	[RES_VDD2]	= 0x63,
+	[RES_VUSB_1V5]	= 0x71,
+	[RES_VUSB_1V8]	= 0x74,
+	[RES_VUSB_3V1]	= 0x77,
+	[RES_VUSBCP]	= 0x7a,
+	[RES_REGEN]	= 0x7f,
+	[RES_NRES_PWRON] = 0x82,
+	[RES_CLKEN]	= 0x85,
+	[RES_SYSEN]	= 0x88,
+	[RES_HFCLKOUT]	= 0x8b,
+	[RES_32KCLKOUT]	= 0x8e,
+	[RES_RESET]	= 0x91,
+	[RES_Main_Ref]	= 0x94,
+};
+
+static int __init twl4030_write_script_byte(u8 address, u8 byte)
+{
+	int err;
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_MEMORY_ADDRESS);
+	if (err)
+		goto out;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
+				R_MEMORY_DATA);
+out:
+	return err;
+}
+
+static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+					   u8 delay, u8 next)
+{
+	int err;
+
+	address *= 4;
+	err = twl4030_write_script_byte(address++, pmb_message >> 8);
+	if (err)
+		goto out;
+	err = twl4030_write_script_byte(address++, pmb_message & 0xff);
+	if (err)
+		goto out;
+	err = twl4030_write_script_byte(address++, delay);
+	if (err)
+		goto out;
+	err = twl4030_write_script_byte(address++, next);
+out:
+	return err;
+}
+
+static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+				       int len)
+{
+	int err;
+
+	for (; len; len--, address++, script++) {
+		if (len == 1) {
+			err = twl4030_write_script_ins(address,
+						script->pmb_message,
+						script->delay,
+						END_OF_SCRIPT);
+			if (err)
+				break;
+		} else {
+			err = twl4030_write_script_ins(address,
+						script->pmb_message,
+						script->delay,
+						address + 1);
+			if (err)
+				break;
+		}
+	}
+	return err;
+}
+
+static int __init twl4030_config_wakeup3_sequence(u8 address)
+{
+	int err;
+	u8 data;
+
+	/* Set SLEEP to ACTIVE SEQ address for P3 */
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_SEQ_ADD_S2A3);
+	if (err)
+		goto out;
+
+	/* P3 LVL_WAKEUP should be on LEVEL */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+				R_P3_SW_EVENTS);
+	if (err)
+		goto out;
+	data |= LVL_WAKEUP;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+				R_P3_SW_EVENTS);
+out:
+	if (err)
+		pr_err("TWL4030 wakeup sequence for P3 config error\n");
+	return err;
+}
+
+static int __init twl4030_config_wakeup12_sequence(u8 address)
+{
+	int err = 0;
+	u8 data;
+
+	/* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_SEQ_ADD_S2A12);
+	if (err)
+		goto out;
+
+	/* P1/P2 LVL_WAKEUP should be on LEVEL */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+				R_P1_SW_EVENTS);
+	if (err)
+		goto out;
+
+	data |= LVL_WAKEUP;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+				R_P1_SW_EVENTS);
+	if (err)
+		goto out;
+
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+				R_P2_SW_EVENTS);
+	if (err)
+		goto out;
+
+	data |= LVL_WAKEUP;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data,
+				R_P2_SW_EVENTS);
+	if (err)
+		goto out;
+
+	if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) {
+		/* Disabling AC charger effect on sleep-active transitions */
+		err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+					R_CFG_P1_TRANSITION);
+		if (err)
+			goto out;
+		data &= ~(1<<1);
+		err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
+					R_CFG_P1_TRANSITION);
+		if (err)
+			goto out;
+	}
+
+out:
+	if (err)
+		pr_err("TWL4030 wakeup sequence for P1 and P2" \
+			"config error\n");
+	return err;
+}
+
+static int __init twl4030_config_sleep_sequence(u8 address)
+{
+	int err;
+
+	/* Set ACTIVE to SLEEP SEQ address in T2 memory*/
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_SEQ_ADD_A2S);
+
+	if (err)
+		pr_err("TWL4030 sleep sequence config error\n");
+
+	return err;
+}
+
+static int __init twl4030_config_warmreset_sequence(u8 address)
+{
+	int err;
+	u8 rd_data;
+
+	/* Set WARM RESET SEQ address for P1 */
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+				R_SEQ_ADD_WARM);
+	if (err)
+		goto out;
+
+	/* P1/P2/P3 enable WARMRESET */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+				R_P1_SW_EVENTS);
+	if (err)
+		goto out;
+
+	rd_data |= ENABLE_WARMRESET;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+				R_P1_SW_EVENTS);
+	if (err)
+		goto out;
+
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+				R_P2_SW_EVENTS);
+	if (err)
+		goto out;
+
+	rd_data |= ENABLE_WARMRESET;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+				R_P2_SW_EVENTS);
+	if (err)
+		goto out;
+
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+				R_P3_SW_EVENTS);
+	if (err)
+		goto out;
+
+	rd_data |= ENABLE_WARMRESET;
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+				R_P3_SW_EVENTS);
+out:
+	if (err)
+		pr_err("TWL4030 warmreset seq config error\n");
+	return err;
+}
+
+static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+{
+	int rconfig_addr;
+	int err;
+	u8 type;
+	u8 grp;
+
+	if (rconfig->resource > TOTAL_RESOURCES) {
+		pr_err("TWL4030 Resource %d does not exist\n",
+			rconfig->resource);
+		return -EINVAL;
+	}
+
+	rconfig_addr = res_config_addrs[rconfig->resource];
+
+	/* Set resource group */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp,
+				rconfig_addr + DEVGROUP_OFFSET);
+	if (err) {
+		pr_err("TWL4030 Resource %d group could not be read\n",
+			rconfig->resource);
+		return err;
+	}
+
+	if (rconfig->devgroup >= 0) {
+		grp &= ~DEVGROUP_MASK;
+		grp |= rconfig->devgroup << DEVGROUP_SHIFT;
+		err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+					grp, rconfig_addr + DEVGROUP_OFFSET);
+		if (err < 0) {
+			pr_err("TWL4030 failed to program devgroup\n");
+			return err;
+		}
+	}
+
+	/* Set resource types */
+	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
+				rconfig_addr + TYPE_OFFSET);
+	if (err < 0) {
+		pr_err("TWL4030 Resource %d type could not be read\n",
+			rconfig->resource);
+		return err;
+	}
+
+	if (rconfig->type >= 0) {
+		type &= ~TYPE_MASK;
+		type |= rconfig->type << TYPE_SHIFT;
+	}
+
+	if (rconfig->type2 >= 0) {
+		type &= ~TYPE2_MASK;
+		type |= rconfig->type2 << TYPE2_SHIFT;
+	}
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+				type, rconfig_addr + TYPE_OFFSET);
+	if (err < 0) {
+		pr_err("TWL4030 failed to program resource type\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int __init load_twl4030_script(struct twl4030_script *tscript,
+	       u8 address)
+{
+	int err;
+	static int order;
+
+	/* Make sure the script isn't going beyond last valid address (0x3f) */
+	if ((address + tscript->size) > END_OF_SCRIPT) {
+		pr_err("TWL4030 scripts too big error\n");
+		return -EINVAL;
+	}
+
+	err = twl4030_write_script(address, tscript->script, tscript->size);
+	if (err)
+		goto out;
+
+	if (tscript->flags & TWL4030_WRST_SCRIPT) {
+		err = twl4030_config_warmreset_sequence(address);
+		if (err)
+			goto out;
+	}
+	if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) {
+		err = twl4030_config_wakeup12_sequence(address);
+		if (err)
+			goto out;
+		order = 1;
+	}
+	if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) {
+		err = twl4030_config_wakeup3_sequence(address);
+		if (err)
+			goto out;
+	}
+	if (tscript->flags & TWL4030_SLEEP_SCRIPT)
+		if (order)
+			pr_warning("TWL4030: Bad order of scripts (sleep "\
+					"script before wakeup) Leads to boot"\
+					"failure on some boards\n");
+		err = twl4030_config_sleep_sequence(address);
+out:
+	return err;
+}
+
+void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
+{
+	int err = 0;
+	int i;
+	struct twl4030_resconfig *resconfig;
+	u8 address = twl4030_start_script_address;
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1,
+				R_PROTECT_KEY);
+	if (err)
+		goto unlock;
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2,
+				R_PROTECT_KEY);
+	if (err)
+		goto unlock;
+
+	for (i = 0; i < twl4030_scripts->num; i++) {
+		err = load_twl4030_script(twl4030_scripts->scripts[i], address);
+		if (err)
+			goto load;
+		address += twl4030_scripts->scripts[i]->size;
+	}
+
+	resconfig = twl4030_scripts->resource_config;
+	if (resconfig) {
+		while (resconfig->resource) {
+			err = twl4030_configure_resource(resconfig);
+			if (err)
+				goto resource;
+			resconfig++;
+
+		}
+	}
+
+	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
+	if (err)
+		pr_err("TWL4030 Unable to relock registers\n");
+	return;
+
+unlock:
+	if (err)
+		pr_err("TWL4030 Unable to unlock registers\n");
+	return;
+load:
+	if (err)
+		pr_err("TWL4030 failed to load scripts\n");
+	return;
+resource:
+	if (err)
+		pr_err("TWL4030 failed to configure resource\n");
+	return;
+}
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
new file mode 100644
index 00000000000..49b7885c270
--- /dev/null
+++ b/drivers/mfd/wm831x-core.c
@@ -0,0 +1,1549 @@
+/*
+ * wm831x-core.c  --  Device access for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/otp.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+/* Current settings - values are 2*2^(reg_val/4) microamps.  These are
+ * exported since they are used by multiple drivers.
+ */
+int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = {
+	2,
+	2,
+	3,
+	3,
+	4,
+	5,
+	6,
+	7,
+	8,
+	10,
+	11,
+	13,
+	16,
+	19,
+	23,
+	27,
+	32,
+	38,
+	45,
+	54,
+	64,
+	76,
+	91,
+	108,
+	128,
+	152,
+	181,
+	215,
+	256,
+	304,
+	362,
+	431,
+	512,
+	609,
+	724,
+	861,
+	1024,
+	1218,
+	1448,
+	1722,
+	2048,
+	2435,
+	2896,
+	3444,
+	4096,
+	4871,
+	5793,
+	6889,
+	8192,
+	9742,
+	11585,
+	13777,
+	16384,
+	19484,
+	23170,
+	27554,
+};
+EXPORT_SYMBOL_GPL(wm831x_isinkv_values);
+
+enum wm831x_parent {
+	WM8310 = 0,
+	WM8311 = 1,
+	WM8312 = 2,
+};
+
+static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
+{
+	if (!wm831x->locked)
+		return 0;
+
+	switch (reg) {
+	case WM831X_WATCHDOG:
+	case WM831X_DC4_CONTROL:
+	case WM831X_ON_PIN_CONTROL:
+	case WM831X_BACKUP_CHARGER_CONTROL:
+	case WM831X_CHARGER_CONTROL_1:
+	case WM831X_CHARGER_CONTROL_2:
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+/**
+ * wm831x_reg_unlock: Unlock user keyed registers
+ *
+ * The WM831x has a user key preventing writes to particularly
+ * critical registers.  This function locks those registers,
+ * allowing writes to them.
+ */
+void wm831x_reg_lock(struct wm831x *wm831x)
+{
+	int ret;
+
+	ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0);
+	if (ret == 0) {
+		dev_vdbg(wm831x->dev, "Registers locked\n");
+
+		mutex_lock(&wm831x->io_lock);
+		WARN_ON(wm831x->locked);
+		wm831x->locked = 1;
+		mutex_unlock(&wm831x->io_lock);
+	} else {
+		dev_err(wm831x->dev, "Failed to lock registers: %d\n", ret);
+	}
+
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_lock);
+
+/**
+ * wm831x_reg_unlock: Unlock user keyed registers
+ *
+ * The WM831x has a user key preventing writes to particularly
+ * critical registers.  This function locks those registers,
+ * preventing spurious writes.
+ */
+int wm831x_reg_unlock(struct wm831x *wm831x)
+{
+	int ret;
+
+	/* 0x9716 is the value required to unlock the registers */
+	ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0x9716);
+	if (ret == 0) {
+		dev_vdbg(wm831x->dev, "Registers unlocked\n");
+
+		mutex_lock(&wm831x->io_lock);
+		WARN_ON(!wm831x->locked);
+		wm831x->locked = 0;
+		mutex_unlock(&wm831x->io_lock);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_unlock);
+
+static int wm831x_read(struct wm831x *wm831x, unsigned short reg,
+		       int bytes, void *dest)
+{
+	int ret, i;
+	u16 *buf = dest;
+
+	BUG_ON(bytes % 2);
+	BUG_ON(bytes <= 0);
+
+	ret = wm831x->read_dev(wm831x, reg, bytes, dest);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < bytes / 2; i++) {
+		buf[i] = be16_to_cpu(buf[i]);
+
+		dev_vdbg(wm831x->dev, "Read %04x from R%d(0x%x)\n",
+			 buf[i], reg + i, reg + i);
+	}
+
+	return 0;
+}
+
+/**
+ * wm831x_reg_read: Read a single WM831x register.
+ *
+ * @wm831x: Device to read from.
+ * @reg: Register to read.
+ */
+int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg)
+{
+	unsigned short val;
+	int ret;
+
+	mutex_lock(&wm831x->io_lock);
+
+	ret = wm831x_read(wm831x, reg, 2, &val);
+
+	mutex_unlock(&wm831x->io_lock);
+
+	if (ret < 0)
+		return ret;
+	else
+		return val;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_read);
+
+/**
+ * wm831x_bulk_read: Read multiple WM831x registers
+ *
+ * @wm831x: Device to read from
+ * @reg: First register
+ * @count: Number of registers
+ * @buf: Buffer to fill.
+ */
+int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
+		     int count, u16 *buf)
+{
+	int ret;
+
+	mutex_lock(&wm831x->io_lock);
+
+	ret = wm831x_read(wm831x, reg, count * 2, buf);
+
+	mutex_unlock(&wm831x->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_bulk_read);
+
+static int wm831x_write(struct wm831x *wm831x, unsigned short reg,
+			int bytes, void *src)
+{
+	u16 *buf = src;
+	int i;
+
+	BUG_ON(bytes % 2);
+	BUG_ON(bytes <= 0);
+
+	for (i = 0; i < bytes / 2; i++) {
+		if (wm831x_reg_locked(wm831x, reg))
+			return -EPERM;
+
+		dev_vdbg(wm831x->dev, "Write %04x to R%d(0x%x)\n",
+			 buf[i], reg + i, reg + i);
+
+		buf[i] = cpu_to_be16(buf[i]);
+	}
+
+	return wm831x->write_dev(wm831x, reg, bytes, src);
+}
+
+/**
+ * wm831x_reg_write: Write a single WM831x register.
+ *
+ * @wm831x: Device to write to.
+ * @reg: Register to write to.
+ * @val: Value to write.
+ */
+int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
+		     unsigned short val)
+{
+	int ret;
+
+	mutex_lock(&wm831x->io_lock);
+
+	ret = wm831x_write(wm831x, reg, 2, &val);
+
+	mutex_unlock(&wm831x->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_write);
+
+/**
+ * wm831x_set_bits: Set the value of a bitfield in a WM831x register
+ *
+ * @wm831x: Device to write to.
+ * @reg: Register to write to.
+ * @mask: Mask of bits to set.
+ * @val: Value to set (unshifted)
+ */
+int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
+		    unsigned short mask, unsigned short val)
+{
+	int ret;
+	u16 r;
+
+	mutex_lock(&wm831x->io_lock);
+
+	ret = wm831x_read(wm831x, reg, 2, &r);
+	if (ret < 0)
+		goto out;
+
+	r &= ~mask;
+	r |= val;
+
+	ret = wm831x_write(wm831x, reg, 2, &r);
+
+out:
+	mutex_unlock(&wm831x->io_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_set_bits);
+
+/**
+ * wm831x_auxadc_read: Read a value from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+	int tries = 10;
+	int ret, src;
+
+	mutex_lock(&wm831x->auxadc_lock);
+
+	ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+			      WM831X_AUX_ENA, WM831X_AUX_ENA);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
+		goto out;
+	}
+
+	/* We force a single source at present */
+	src = input;
+	ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
+			       1 << src);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
+		goto out;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+			      WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
+		goto disable;
+	}
+
+	do {
+		msleep(1);
+
+		ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
+		if (ret < 0)
+			ret = WM831X_AUX_CVT_ENA;
+	} while ((ret & WM831X_AUX_CVT_ENA) && --tries);
+
+	if (ret & WM831X_AUX_CVT_ENA) {
+		dev_err(wm831x->dev, "Timed out reading AUXADC\n");
+		ret = -EBUSY;
+		goto disable;
+	}
+
+	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret);
+	} else {
+		src = ((ret & WM831X_AUX_DATA_SRC_MASK)
+		       >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
+
+		if (src == 14)
+			src = WM831X_AUX_CAL;
+
+		if (src != input) {
+			dev_err(wm831x->dev, "Data from source %d not %d\n",
+				src, input);
+			ret = -EINVAL;
+		} else {
+			ret &= WM831X_AUX_DATA_MASK;
+		}
+	}
+
+disable:
+	wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
+out:
+	mutex_unlock(&wm831x->auxadc_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
+
+/**
+ * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+	int ret;
+
+	ret = wm831x_auxadc_read(wm831x, input);
+	if (ret < 0)
+		return ret;
+
+	ret *= 1465;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
+
+static struct resource wm831x_dcdc1_resources[] = {
+	{
+		.start = WM831X_DC1_CONTROL_1,
+		.end   = WM831X_DC1_DVS_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC1,
+		.end   = WM831X_IRQ_UV_DC1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "HC",
+		.start = WM831X_IRQ_HC_DC1,
+		.end   = WM831X_IRQ_HC_DC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+
+static struct resource wm831x_dcdc2_resources[] = {
+	{
+		.start = WM831X_DC2_CONTROL_1,
+		.end   = WM831X_DC2_DVS_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC2,
+		.end   = WM831X_IRQ_UV_DC2,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "HC",
+		.start = WM831X_IRQ_HC_DC2,
+		.end   = WM831X_IRQ_HC_DC2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_dcdc3_resources[] = {
+	{
+		.start = WM831X_DC3_CONTROL_1,
+		.end   = WM831X_DC3_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC3,
+		.end   = WM831X_IRQ_UV_DC3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_dcdc4_resources[] = {
+	{
+		.start = WM831X_DC4_CONTROL,
+		.end   = WM831X_DC4_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_DC4,
+		.end   = WM831X_IRQ_UV_DC4,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_gpio_resources[] = {
+	{
+		.start = WM831X_IRQ_GPIO_1,
+		.end   = WM831X_IRQ_GPIO_16,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_isink1_resources[] = {
+	{
+		.start = WM831X_CURRENT_SINK_1,
+		.end   = WM831X_CURRENT_SINK_1,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.start = WM831X_IRQ_CS1,
+		.end   = WM831X_IRQ_CS1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_isink2_resources[] = {
+	{
+		.start = WM831X_CURRENT_SINK_2,
+		.end   = WM831X_CURRENT_SINK_2,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.start = WM831X_IRQ_CS2,
+		.end   = WM831X_IRQ_CS2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo1_resources[] = {
+	{
+		.start = WM831X_LDO1_CONTROL,
+		.end   = WM831X_LDO1_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO1,
+		.end   = WM831X_IRQ_UV_LDO1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo2_resources[] = {
+	{
+		.start = WM831X_LDO2_CONTROL,
+		.end   = WM831X_LDO2_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO2,
+		.end   = WM831X_IRQ_UV_LDO2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo3_resources[] = {
+	{
+		.start = WM831X_LDO3_CONTROL,
+		.end   = WM831X_LDO3_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO3,
+		.end   = WM831X_IRQ_UV_LDO3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo4_resources[] = {
+	{
+		.start = WM831X_LDO4_CONTROL,
+		.end   = WM831X_LDO4_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO4,
+		.end   = WM831X_IRQ_UV_LDO4,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo5_resources[] = {
+	{
+		.start = WM831X_LDO5_CONTROL,
+		.end   = WM831X_LDO5_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO5,
+		.end   = WM831X_IRQ_UV_LDO5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo6_resources[] = {
+	{
+		.start = WM831X_LDO6_CONTROL,
+		.end   = WM831X_LDO6_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO6,
+		.end   = WM831X_IRQ_UV_LDO6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo7_resources[] = {
+	{
+		.start = WM831X_LDO7_CONTROL,
+		.end   = WM831X_LDO7_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO7,
+		.end   = WM831X_IRQ_UV_LDO7,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo8_resources[] = {
+	{
+		.start = WM831X_LDO8_CONTROL,
+		.end   = WM831X_LDO8_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO8,
+		.end   = WM831X_IRQ_UV_LDO8,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo9_resources[] = {
+	{
+		.start = WM831X_LDO9_CONTROL,
+		.end   = WM831X_LDO9_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO9,
+		.end   = WM831X_IRQ_UV_LDO9,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo10_resources[] = {
+	{
+		.start = WM831X_LDO10_CONTROL,
+		.end   = WM831X_LDO10_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		.name  = "UV",
+		.start = WM831X_IRQ_UV_LDO10,
+		.end   = WM831X_IRQ_UV_LDO10,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_ldo11_resources[] = {
+	{
+		.start = WM831X_LDO11_ON_CONTROL,
+		.end   = WM831X_LDO11_SLEEP_CONTROL,
+		.flags = IORESOURCE_IO,
+	},
+};
+
+static struct resource wm831x_on_resources[] = {
+	{
+		.start = WM831X_IRQ_ON,
+		.end   = WM831X_IRQ_ON,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+
+static struct resource wm831x_power_resources[] = {
+	{
+		.name = "SYSLO",
+		.start = WM831X_IRQ_PPM_SYSLO,
+		.end   = WM831X_IRQ_PPM_SYSLO,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "PWR SRC",
+		.start = WM831X_IRQ_PPM_PWR_SRC,
+		.end   = WM831X_IRQ_PPM_PWR_SRC,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "USB CURR",
+		.start = WM831X_IRQ_PPM_USB_CURR,
+		.end   = WM831X_IRQ_PPM_USB_CURR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "BATT HOT",
+		.start = WM831X_IRQ_CHG_BATT_HOT,
+		.end   = WM831X_IRQ_CHG_BATT_HOT,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "BATT COLD",
+		.start = WM831X_IRQ_CHG_BATT_COLD,
+		.end   = WM831X_IRQ_CHG_BATT_COLD,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "BATT FAIL",
+		.start = WM831X_IRQ_CHG_BATT_FAIL,
+		.end   = WM831X_IRQ_CHG_BATT_FAIL,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "OV",
+		.start = WM831X_IRQ_CHG_OV,
+		.end   = WM831X_IRQ_CHG_OV,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "END",
+		.start = WM831X_IRQ_CHG_END,
+		.end   = WM831X_IRQ_CHG_END,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "TO",
+		.start = WM831X_IRQ_CHG_TO,
+		.end   = WM831X_IRQ_CHG_TO,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "MODE",
+		.start = WM831X_IRQ_CHG_MODE,
+		.end   = WM831X_IRQ_CHG_MODE,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "START",
+		.start = WM831X_IRQ_CHG_START,
+		.end   = WM831X_IRQ_CHG_START,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_rtc_resources[] = {
+	{
+		.name = "PER",
+		.start = WM831X_IRQ_RTC_PER,
+		.end   = WM831X_IRQ_RTC_PER,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "ALM",
+		.start = WM831X_IRQ_RTC_ALM,
+		.end   = WM831X_IRQ_RTC_ALM,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_status1_resources[] = {
+	{
+		.start = WM831X_STATUS_LED_1,
+		.end   = WM831X_STATUS_LED_1,
+		.flags = IORESOURCE_IO,
+	},
+};
+
+static struct resource wm831x_status2_resources[] = {
+	{
+		.start = WM831X_STATUS_LED_2,
+		.end   = WM831X_STATUS_LED_2,
+		.flags = IORESOURCE_IO,
+	},
+};
+
+static struct resource wm831x_touch_resources[] = {
+	{
+		.name = "TCHPD",
+		.start = WM831X_IRQ_TCHPD,
+		.end   = WM831X_IRQ_TCHPD,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "TCHDATA",
+		.start = WM831X_IRQ_TCHDATA,
+		.end   = WM831X_IRQ_TCHDATA,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm831x_wdt_resources[] = {
+	{
+		.start = WM831X_IRQ_WDOG_TO,
+		.end   = WM831X_IRQ_WDOG_TO,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell wm8310_devs[] = {
+	{
+		.name = "wm831x-buckv",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+		.resources = wm831x_dcdc1_resources,
+	},
+	{
+		.name = "wm831x-buckv",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+		.resources = wm831x_dcdc2_resources,
+	},
+	{
+		.name = "wm831x-buckp",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+		.resources = wm831x_dcdc3_resources,
+	},
+	{
+		.name = "wm831x-boostp",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+		.resources = wm831x_dcdc4_resources,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 1,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 2,
+	},
+	{
+		.name = "wm831x-gpio",
+		.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+		.resources = wm831x_gpio_resources,
+	},
+	{
+		.name = "wm831x-hwmon",
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+		.resources = wm831x_isink1_resources,
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+		.resources = wm831x_isink2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+		.resources = wm831x_ldo1_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+		.resources = wm831x_ldo2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+		.resources = wm831x_ldo3_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+		.resources = wm831x_ldo4_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 5,
+		.num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+		.resources = wm831x_ldo5_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 6,
+		.num_resources = ARRAY_SIZE(wm831x_ldo6_resources),
+		.resources = wm831x_ldo6_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 7,
+		.num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+		.resources = wm831x_ldo7_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 8,
+		.num_resources = ARRAY_SIZE(wm831x_ldo8_resources),
+		.resources = wm831x_ldo8_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 9,
+		.num_resources = ARRAY_SIZE(wm831x_ldo9_resources),
+		.resources = wm831x_ldo9_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 10,
+		.num_resources = ARRAY_SIZE(wm831x_ldo10_resources),
+		.resources = wm831x_ldo10_resources,
+	},
+	{
+		.name = "wm831x-alive-ldo",
+		.id = 11,
+		.num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+		.resources = wm831x_ldo11_resources,
+	},
+	{
+		.name = "wm831x-on",
+		.num_resources = ARRAY_SIZE(wm831x_on_resources),
+		.resources = wm831x_on_resources,
+	},
+	{
+		.name = "wm831x-power",
+		.num_resources = ARRAY_SIZE(wm831x_power_resources),
+		.resources = wm831x_power_resources,
+	},
+	{
+		.name = "wm831x-rtc",
+		.num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+		.resources = wm831x_rtc_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_status1_resources),
+		.resources = wm831x_status1_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_status2_resources),
+		.resources = wm831x_status2_resources,
+	},
+	{
+		.name = "wm831x-watchdog",
+		.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+		.resources = wm831x_wdt_resources,
+	},
+};
+
+static struct mfd_cell wm8311_devs[] = {
+	{
+		.name = "wm831x-buckv",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+		.resources = wm831x_dcdc1_resources,
+	},
+	{
+		.name = "wm831x-buckv",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+		.resources = wm831x_dcdc2_resources,
+	},
+	{
+		.name = "wm831x-buckp",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+		.resources = wm831x_dcdc3_resources,
+	},
+	{
+		.name = "wm831x-boostp",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+		.resources = wm831x_dcdc4_resources,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 1,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 2,
+	},
+	{
+		.name = "wm831x-gpio",
+		.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+		.resources = wm831x_gpio_resources,
+	},
+	{
+		.name = "wm831x-hwmon",
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+		.resources = wm831x_isink1_resources,
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+		.resources = wm831x_isink2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+		.resources = wm831x_ldo1_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+		.resources = wm831x_ldo2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+		.resources = wm831x_ldo3_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+		.resources = wm831x_ldo4_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 5,
+		.num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+		.resources = wm831x_ldo5_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 7,
+		.num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+		.resources = wm831x_ldo7_resources,
+	},
+	{
+		.name = "wm831x-alive-ldo",
+		.id = 11,
+		.num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+		.resources = wm831x_ldo11_resources,
+	},
+	{
+		.name = "wm831x-on",
+		.num_resources = ARRAY_SIZE(wm831x_on_resources),
+		.resources = wm831x_on_resources,
+	},
+	{
+		.name = "wm831x-power",
+		.num_resources = ARRAY_SIZE(wm831x_power_resources),
+		.resources = wm831x_power_resources,
+	},
+	{
+		.name = "wm831x-rtc",
+		.num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+		.resources = wm831x_rtc_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_status1_resources),
+		.resources = wm831x_status1_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_status2_resources),
+		.resources = wm831x_status2_resources,
+	},
+	{
+		.name = "wm831x-touch",
+		.num_resources = ARRAY_SIZE(wm831x_touch_resources),
+		.resources = wm831x_touch_resources,
+	},
+	{
+		.name = "wm831x-watchdog",
+		.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+		.resources = wm831x_wdt_resources,
+	},
+};
+
+static struct mfd_cell wm8312_devs[] = {
+	{
+		.name = "wm831x-buckv",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+		.resources = wm831x_dcdc1_resources,
+	},
+	{
+		.name = "wm831x-buckv",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+		.resources = wm831x_dcdc2_resources,
+	},
+	{
+		.name = "wm831x-buckp",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+		.resources = wm831x_dcdc3_resources,
+	},
+	{
+		.name = "wm831x-boostp",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+		.resources = wm831x_dcdc4_resources,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 1,
+	},
+	{
+		.name = "wm831x-epe",
+		.id = 2,
+	},
+	{
+		.name = "wm831x-gpio",
+		.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+		.resources = wm831x_gpio_resources,
+	},
+	{
+		.name = "wm831x-hwmon",
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+		.resources = wm831x_isink1_resources,
+	},
+	{
+		.name = "wm831x-isink",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+		.resources = wm831x_isink2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+		.resources = wm831x_ldo1_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+		.resources = wm831x_ldo2_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 3,
+		.num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+		.resources = wm831x_ldo3_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 4,
+		.num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+		.resources = wm831x_ldo4_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 5,
+		.num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+		.resources = wm831x_ldo5_resources,
+	},
+	{
+		.name = "wm831x-ldo",
+		.id = 6,
+		.num_resources = ARRAY_SIZE(wm831x_ldo6_resources),
+		.resources = wm831x_ldo6_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 7,
+		.num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+		.resources = wm831x_ldo7_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 8,
+		.num_resources = ARRAY_SIZE(wm831x_ldo8_resources),
+		.resources = wm831x_ldo8_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 9,
+		.num_resources = ARRAY_SIZE(wm831x_ldo9_resources),
+		.resources = wm831x_ldo9_resources,
+	},
+	{
+		.name = "wm831x-aldo",
+		.id = 10,
+		.num_resources = ARRAY_SIZE(wm831x_ldo10_resources),
+		.resources = wm831x_ldo10_resources,
+	},
+	{
+		.name = "wm831x-alive-ldo",
+		.id = 11,
+		.num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+		.resources = wm831x_ldo11_resources,
+	},
+	{
+		.name = "wm831x-on",
+		.num_resources = ARRAY_SIZE(wm831x_on_resources),
+		.resources = wm831x_on_resources,
+	},
+	{
+		.name = "wm831x-power",
+		.num_resources = ARRAY_SIZE(wm831x_power_resources),
+		.resources = wm831x_power_resources,
+	},
+	{
+		.name = "wm831x-rtc",
+		.num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+		.resources = wm831x_rtc_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 1,
+		.num_resources = ARRAY_SIZE(wm831x_status1_resources),
+		.resources = wm831x_status1_resources,
+	},
+	{
+		.name = "wm831x-status",
+		.id = 2,
+		.num_resources = ARRAY_SIZE(wm831x_status2_resources),
+		.resources = wm831x_status2_resources,
+	},
+	{
+		.name = "wm831x-touch",
+		.num_resources = ARRAY_SIZE(wm831x_touch_resources),
+		.resources = wm831x_touch_resources,
+	},
+	{
+		.name = "wm831x-watchdog",
+		.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+		.resources = wm831x_wdt_resources,
+	},
+};
+
+static struct mfd_cell backlight_devs[] = {
+	{
+		.name = "wm831x-backlight",
+	},
+};
+
+/*
+ * Instantiate the generic non-control parts of the device.
+ */
+static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
+{
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int rev;
+	enum wm831x_parent parent;
+	int ret;
+
+	mutex_init(&wm831x->io_lock);
+	mutex_init(&wm831x->key_lock);
+	mutex_init(&wm831x->auxadc_lock);
+	dev_set_drvdata(wm831x->dev, wm831x);
+
+	ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret);
+		goto err;
+	}
+	if (ret != 0x6204) {
+		dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = wm831x_reg_read(wm831x, WM831X_REVISION);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read revision: %d\n", ret);
+		goto err;
+	}
+	rev = (ret & WM831X_PARENT_REV_MASK) >> WM831X_PARENT_REV_SHIFT;
+
+	ret = wm831x_reg_read(wm831x, WM831X_RESET_ID);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read device ID: %d\n", ret);
+		goto err;
+	}
+
+	switch (ret) {
+	case 0x8310:
+		parent = WM8310;
+		switch (rev) {
+		case 0:
+			dev_info(wm831x->dev, "WM8310 revision %c\n",
+				 'A' + rev);
+			break;
+		}
+		break;
+
+	case 0x8311:
+		parent = WM8311;
+		switch (rev) {
+		case 0:
+			dev_info(wm831x->dev, "WM8311 revision %c\n",
+				 'A' + rev);
+			break;
+		}
+		break;
+
+	case 0x8312:
+		parent = WM8312;
+		switch (rev) {
+		case 0:
+			dev_info(wm831x->dev, "WM8312 revision %c\n",
+				 'A' + rev);
+			break;
+		}
+		break;
+
+	case 0:
+		/* Some engineering samples do not have the ID set,
+		 * rely on the device being registered correctly.
+		 * This will need revisiting for future devices with
+		 * multiple dies.
+		 */
+		parent = id;
+		switch (rev) {
+		case 0:
+			dev_info(wm831x->dev, "WM831%d ES revision %c\n",
+				 parent, 'A' + rev);
+			break;
+		}
+		break;
+
+	default:
+		dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* This will need revisiting in future but is OK for all
+	 * current parts.
+	 */
+	if (parent != id)
+		dev_warn(wm831x->dev, "Device was registered as a WM831%lu\n",
+			 id);
+
+	/* Bootstrap the user key */
+	ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read security key: %d\n", ret);
+		goto err;
+	}
+	if (ret != 0) {
+		dev_warn(wm831x->dev, "Security key had non-zero value %x\n",
+			 ret);
+		wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0);
+	}
+	wm831x->locked = 1;
+
+	if (pdata && pdata->pre_init) {
+		ret = pdata->pre_init(wm831x);
+		if (ret != 0) {
+			dev_err(wm831x->dev, "pre_init() failed: %d\n", ret);
+			goto err;
+		}
+	}
+
+	ret = wm831x_irq_init(wm831x, irq);
+	if (ret != 0)
+		goto err;
+
+	/* The core device is up, instantiate the subdevices. */
+	switch (parent) {
+	case WM8310:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8310_devs, ARRAY_SIZE(wm8310_devs),
+				      NULL, 0);
+		break;
+
+	case WM8311:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8311_devs, ARRAY_SIZE(wm8311_devs),
+				      NULL, 0);
+		break;
+
+	case WM8312:
+		ret = mfd_add_devices(wm831x->dev, -1,
+				      wm8312_devs, ARRAY_SIZE(wm8312_devs),
+				      NULL, 0);
+		break;
+
+	default:
+		/* If this happens the bus probe function is buggy */
+		BUG();
+	}
+
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to add children\n");
+		goto err_irq;
+	}
+
+	if (pdata && pdata->backlight) {
+		/* Treat errors as non-critical */
+		ret = mfd_add_devices(wm831x->dev, -1, backlight_devs,
+				      ARRAY_SIZE(backlight_devs), NULL, 0);
+		if (ret < 0)
+			dev_err(wm831x->dev, "Failed to add backlight: %d\n",
+				ret);
+	}
+
+	wm831x_otp_init(wm831x);
+
+	if (pdata && pdata->post_init) {
+		ret = pdata->post_init(wm831x);
+		if (ret != 0) {
+			dev_err(wm831x->dev, "post_init() failed: %d\n", ret);
+			goto err_irq;
+		}
+	}
+
+	return 0;
+
+err_irq:
+	wm831x_irq_exit(wm831x);
+err:
+	mfd_remove_devices(wm831x->dev);
+	kfree(wm831x);
+	return ret;
+}
+
+static void wm831x_device_exit(struct wm831x *wm831x)
+{
+	wm831x_otp_exit(wm831x);
+	mfd_remove_devices(wm831x->dev);
+	wm831x_irq_exit(wm831x);
+	kfree(wm831x);
+}
+
+static int wm831x_i2c_read_device(struct wm831x *wm831x, unsigned short reg,
+				  int bytes, void *dest)
+{
+	struct i2c_client *i2c = wm831x->control_data;
+	int ret;
+	u16 r = cpu_to_be16(reg);
+
+	ret = i2c_master_send(i2c, (unsigned char *)&r, 2);
+	if (ret < 0)
+		return ret;
+	if (ret != 2)
+		return -EIO;
+
+	ret = i2c_master_recv(i2c, dest, bytes);
+	if (ret < 0)
+		return ret;
+	if (ret != bytes)
+		return -EIO;
+	return 0;
+}
+
+/* Currently we allocate the write buffer on the stack; this is OK for
+ * small writes - if we need to do large writes this will need to be
+ * revised.
+ */
+static int wm831x_i2c_write_device(struct wm831x *wm831x, unsigned short reg,
+				   int bytes, void *src)
+{
+	struct i2c_client *i2c = wm831x->control_data;
+	unsigned char msg[bytes + 2];
+	int ret;
+
+	reg = cpu_to_be16(reg);
+	memcpy(&msg[0], &reg, 2);
+	memcpy(&msg[2], src, bytes);
+
+	ret = i2c_master_send(i2c, msg, bytes + 2);
+	if (ret < 0)
+		return ret;
+	if (ret < bytes + 2)
+		return -EIO;
+
+	return 0;
+}
+
+static int wm831x_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct wm831x *wm831x;
+
+	wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL);
+	if (wm831x == NULL) {
+		kfree(i2c);
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(i2c, wm831x);
+	wm831x->dev = &i2c->dev;
+	wm831x->control_data = i2c;
+	wm831x->read_dev = wm831x_i2c_read_device;
+	wm831x->write_dev = wm831x_i2c_write_device;
+
+	return wm831x_device_init(wm831x, id->driver_data, i2c->irq);
+}
+
+static int wm831x_i2c_remove(struct i2c_client *i2c)
+{
+	struct wm831x *wm831x = i2c_get_clientdata(i2c);
+
+	wm831x_device_exit(wm831x);
+
+	return 0;
+}
+
+static const struct i2c_device_id wm831x_i2c_id[] = {
+	{ "wm8310", WM8310 },
+	{ "wm8311", WM8311 },
+	{ "wm8312", WM8312 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
+
+
+static struct i2c_driver wm831x_i2c_driver = {
+	.driver = {
+		   .name = "wm831x",
+		   .owner = THIS_MODULE,
+	},
+	.probe = wm831x_i2c_probe,
+	.remove = wm831x_i2c_remove,
+	.id_table = wm831x_i2c_id,
+};
+
+static int __init wm831x_i2c_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&wm831x_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register wm831x I2C driver: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(wm831x_i2c_init);
+
+static void __exit wm831x_i2c_exit(void)
+{
+	i2c_del_driver(&wm831x_i2c_driver);
+}
+module_exit(wm831x_i2c_exit);
+
+MODULE_DESCRIPTION("I2C support for the WM831X AudioPlus PMIC");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown");
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
new file mode 100644
index 00000000000..d3015dfb913
--- /dev/null
+++ b/drivers/mfd/wm831x-irq.c
@@ -0,0 +1,559 @@
+/*
+ * wm831x-irq.c  --  Interrupt controller support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+
+#include <linux/delay.h>
+
+/*
+ * Since generic IRQs don't currently support interrupt controllers on
+ * interrupt driven buses we don't use genirq but instead provide an
+ * interface that looks very much like the standard ones.  This leads
+ * to some bodges, including storing interrupt handler information in
+ * the static irq_data table we use to look up the data for individual
+ * interrupts, but hopefully won't last too long.
+ */
+
+struct wm831x_irq_data {
+	int primary;
+	int reg;
+	int mask;
+	irq_handler_t handler;
+	void *handler_data;
+};
+
+static struct wm831x_irq_data wm831x_irqs[] = {
+	[WM831X_IRQ_TEMP_THW] = {
+		.primary = WM831X_TEMP_INT,
+		.reg = 1,
+		.mask = WM831X_TEMP_THW_EINT,
+	},
+	[WM831X_IRQ_GPIO_1] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP1_EINT,
+	},
+	[WM831X_IRQ_GPIO_2] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP2_EINT,
+	},
+	[WM831X_IRQ_GPIO_3] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP3_EINT,
+	},
+	[WM831X_IRQ_GPIO_4] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP4_EINT,
+	},
+	[WM831X_IRQ_GPIO_5] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP5_EINT,
+	},
+	[WM831X_IRQ_GPIO_6] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP6_EINT,
+	},
+	[WM831X_IRQ_GPIO_7] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP7_EINT,
+	},
+	[WM831X_IRQ_GPIO_8] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP8_EINT,
+	},
+	[WM831X_IRQ_GPIO_9] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP9_EINT,
+	},
+	[WM831X_IRQ_GPIO_10] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP10_EINT,
+	},
+	[WM831X_IRQ_GPIO_11] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP11_EINT,
+	},
+	[WM831X_IRQ_GPIO_12] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP12_EINT,
+	},
+	[WM831X_IRQ_GPIO_13] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP13_EINT,
+	},
+	[WM831X_IRQ_GPIO_14] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP14_EINT,
+	},
+	[WM831X_IRQ_GPIO_15] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP15_EINT,
+	},
+	[WM831X_IRQ_GPIO_16] = {
+		.primary = WM831X_GP_INT,
+		.reg = 5,
+		.mask = WM831X_GP16_EINT,
+	},
+	[WM831X_IRQ_ON] = {
+		.primary = WM831X_ON_PIN_INT,
+		.reg = 1,
+		.mask = WM831X_ON_PIN_EINT,
+	},
+	[WM831X_IRQ_PPM_SYSLO] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_SYSLO_EINT,
+	},
+	[WM831X_IRQ_PPM_PWR_SRC] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_PWR_SRC_EINT,
+	},
+	[WM831X_IRQ_PPM_USB_CURR] = {
+		.primary = WM831X_PPM_INT,
+		.reg = 1,
+		.mask = WM831X_PPM_USB_CURR_EINT,
+	},
+	[WM831X_IRQ_WDOG_TO] = {
+		.primary = WM831X_WDOG_INT,
+		.reg = 1,
+		.mask = WM831X_WDOG_TO_EINT,
+	},
+	[WM831X_IRQ_RTC_PER] = {
+		.primary = WM831X_RTC_INT,
+		.reg = 1,
+		.mask = WM831X_RTC_PER_EINT,
+	},
+	[WM831X_IRQ_RTC_ALM] = {
+		.primary = WM831X_RTC_INT,
+		.reg = 1,
+		.mask = WM831X_RTC_ALM_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_HOT] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_HOT_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_COLD] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_COLD_EINT,
+	},
+	[WM831X_IRQ_CHG_BATT_FAIL] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_BATT_FAIL_EINT,
+	},
+	[WM831X_IRQ_CHG_OV] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_OV_EINT,
+	},
+	[WM831X_IRQ_CHG_END] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_END_EINT,
+	},
+	[WM831X_IRQ_CHG_TO] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_TO_EINT,
+	},
+	[WM831X_IRQ_CHG_MODE] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_MODE_EINT,
+	},
+	[WM831X_IRQ_CHG_START] = {
+		.primary = WM831X_CHG_INT,
+		.reg = 2,
+		.mask = WM831X_CHG_START_EINT,
+	},
+	[WM831X_IRQ_TCHDATA] = {
+		.primary = WM831X_TCHDATA_INT,
+		.reg = 1,
+		.mask = WM831X_TCHDATA_EINT,
+	},
+	[WM831X_IRQ_TCHPD] = {
+		.primary = WM831X_TCHPD_INT,
+		.reg = 1,
+		.mask = WM831X_TCHPD_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DATA] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DATA_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP1] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP1_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP2] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP2_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP3] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP3_EINT,
+	},
+	[WM831X_IRQ_AUXADC_DCOMP4] = {
+		.primary = WM831X_AUXADC_INT,
+		.reg = 1,
+		.mask = WM831X_AUXADC_DCOMP4_EINT,
+	},
+	[WM831X_IRQ_CS1] = {
+		.primary = WM831X_CS_INT,
+		.reg = 2,
+		.mask = WM831X_CS1_EINT,
+	},
+	[WM831X_IRQ_CS2] = {
+		.primary = WM831X_CS_INT,
+		.reg = 2,
+		.mask = WM831X_CS2_EINT,
+	},
+	[WM831X_IRQ_HC_DC1] = {
+		.primary = WM831X_HC_INT,
+		.reg = 4,
+		.mask = WM831X_HC_DC1_EINT,
+	},
+	[WM831X_IRQ_HC_DC2] = {
+		.primary = WM831X_HC_INT,
+		.reg = 4,
+		.mask = WM831X_HC_DC2_EINT,
+	},
+	[WM831X_IRQ_UV_LDO1] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO1_EINT,
+	},
+	[WM831X_IRQ_UV_LDO2] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO2_EINT,
+	},
+	[WM831X_IRQ_UV_LDO3] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO3_EINT,
+	},
+	[WM831X_IRQ_UV_LDO4] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO4_EINT,
+	},
+	[WM831X_IRQ_UV_LDO5] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO5_EINT,
+	},
+	[WM831X_IRQ_UV_LDO6] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO6_EINT,
+	},
+	[WM831X_IRQ_UV_LDO7] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO7_EINT,
+	},
+	[WM831X_IRQ_UV_LDO8] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO8_EINT,
+	},
+	[WM831X_IRQ_UV_LDO9] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO9_EINT,
+	},
+	[WM831X_IRQ_UV_LDO10] = {
+		.primary = WM831X_UV_INT,
+		.reg = 3,
+		.mask = WM831X_UV_LDO10_EINT,
+	},
+	[WM831X_IRQ_UV_DC1] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC1_EINT,
+	},
+	[WM831X_IRQ_UV_DC2] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC2_EINT,
+	},
+	[WM831X_IRQ_UV_DC3] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC3_EINT,
+	},
+	[WM831X_IRQ_UV_DC4] = {
+		.primary = WM831X_UV_INT,
+		.reg = 4,
+		.mask = WM831X_UV_DC4_EINT,
+	},
+};
+
+static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
+{
+	return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
+}
+
+static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
+{
+	return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
+}
+
+static void __wm831x_enable_irq(struct wm831x *wm831x, int irq)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask;
+	wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
+			 wm831x->irq_masks[irq_data->reg - 1]);
+}
+
+void wm831x_enable_irq(struct wm831x *wm831x, int irq)
+{
+	mutex_lock(&wm831x->irq_lock);
+	__wm831x_enable_irq(wm831x, irq);
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_enable_irq);
+
+static void __wm831x_disable_irq(struct wm831x *wm831x, int irq)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask;
+	wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
+			 wm831x->irq_masks[irq_data->reg - 1]);
+}
+
+void wm831x_disable_irq(struct wm831x *wm831x, int irq)
+{
+	mutex_lock(&wm831x->irq_lock);
+	__wm831x_disable_irq(wm831x, irq);
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_disable_irq);
+
+int wm831x_request_irq(struct wm831x *wm831x,
+		       unsigned int irq, irq_handler_t handler,
+		       unsigned long flags, const char *name,
+		       void *dev)
+{
+	int ret = 0;
+
+	if (irq < 0 || irq >= WM831X_NUM_IRQS)
+		return -EINVAL;
+
+	mutex_lock(&wm831x->irq_lock);
+
+	if (wm831x_irqs[irq].handler) {
+		dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	wm831x_irqs[irq].handler = handler;
+	wm831x_irqs[irq].handler_data = dev;
+
+	__wm831x_enable_irq(wm831x, irq);
+
+out:
+	mutex_unlock(&wm831x->irq_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_request_irq);
+
+void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data)
+{
+	if (irq < 0 || irq >= WM831X_NUM_IRQS)
+		return;
+
+	mutex_lock(&wm831x->irq_lock);
+
+	wm831x_irqs[irq].handler = NULL;
+	wm831x_irqs[irq].handler_data = NULL;
+
+	__wm831x_disable_irq(wm831x, irq);
+
+	mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_free_irq);
+
+
+static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status)
+{
+	struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+	if (irq_data->handler) {
+		irq_data->handler(irq, irq_data->handler_data);
+		wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data),
+				 irq_data->mask);
+	} else {
+		dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq);
+		__wm831x_disable_irq(wm831x, irq);
+	}
+}
+
+/* Main interrupt handling occurs in a workqueue since we need
+ * interrupts enabled to interact with the chip. */
+static void wm831x_irq_worker(struct work_struct *work)
+{
+	struct wm831x *wm831x = container_of(work, struct wm831x, irq_work);
+	unsigned int i;
+	int primary;
+	int status_regs[5];
+	int read[5] = { 0 };
+	int *status;
+
+	primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
+	if (primary < 0) {
+		dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
+			primary);
+		goto out;
+	}
+
+	mutex_lock(&wm831x->irq_lock);
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
+		int offset = wm831x_irqs[i].reg - 1;
+
+		if (!(primary & wm831x_irqs[i].primary))
+			continue;
+
+		status = &status_regs[offset];
+
+		/* Hopefully there should only be one register to read
+		 * each time otherwise we ought to do a block read. */
+		if (!read[offset]) {
+			*status = wm831x_reg_read(wm831x,
+				     irq_data_to_status_reg(&wm831x_irqs[i]));
+			if (*status < 0) {
+				dev_err(wm831x->dev,
+					"Failed to read IRQ status: %d\n",
+					*status);
+				goto out_lock;
+			}
+
+			/* Mask out the disabled IRQs */
+			*status &= ~wm831x->irq_masks[offset];
+			read[offset] = 1;
+		}
+
+		if (*status & wm831x_irqs[i].mask)
+			wm831x_handle_irq(wm831x, i, *status);
+	}
+
+out_lock:
+	mutex_unlock(&wm831x->irq_lock);
+out:
+	enable_irq(wm831x->irq);
+}
+
+
+static irqreturn_t wm831x_cpu_irq(int irq, void *data)
+{
+	struct wm831x *wm831x = data;
+
+	/* Shut the interrupt to the CPU up and schedule the actual
+	 * handler; we can't check that the IRQ is asserted. */
+	disable_irq_nosync(irq);
+
+	queue_work(wm831x->irq_wq, &wm831x->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+int wm831x_irq_init(struct wm831x *wm831x, int irq)
+{
+	int i, ret;
+
+	if (!irq) {
+		dev_warn(wm831x->dev,
+			 "No interrupt specified - functionality limited\n");
+		return 0;
+	}
+
+
+	wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq");
+	if (!wm831x->irq_wq) {
+		dev_err(wm831x->dev, "Failed to allocate IRQ worker\n");
+		return -ESRCH;
+	}
+
+	wm831x->irq = irq;
+	mutex_init(&wm831x->irq_lock);
+	INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
+
+	/* Mask the individual interrupt sources */
+	for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) {
+		wm831x->irq_masks[i] = 0xffff;
+		wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
+				 0xffff);
+	}
+
+	/* Enable top level interrupts, we mask at secondary level */
+	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
+
+	/* We're good to go.  We set IRQF_SHARED since there's a
+	 * chance the driver will interoperate with another driver but
+	 * the need to disable the IRQ while handing via I2C/SPI means
+	 * that this may break and performance will be impacted.  If
+	 * this does happen it's a hardware design issue and the only
+	 * other alternative would be polling.
+	 */
+	ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED,
+			  "wm831x", wm831x);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
+			irq, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+void wm831x_irq_exit(struct wm831x *wm831x)
+{
+	if (wm831x->irq)
+		free_irq(wm831x->irq, wm831x);
+}
diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c
new file mode 100644
index 00000000000..f742745ff35
--- /dev/null
+++ b/drivers/mfd/wm831x-otp.c
@@ -0,0 +1,83 @@
+/*
+ * wm831x-otp.c  --  OTP for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/otp.h>
+
+/* In bytes */
+#define WM831X_UNIQUE_ID_LEN 16
+
+/* Read the unique ID from the chip into id */
+static int wm831x_unique_id_read(struct wm831x *wm831x, char *id)
+{
+	int i, val;
+
+	for (i = 0; i < WM831X_UNIQUE_ID_LEN / 2; i++) {
+		val = wm831x_reg_read(wm831x, WM831X_UNIQUE_ID_1 + i);
+		if (val < 0)
+			return val;
+
+		id[i * 2]       = (val >> 8) & 0xff;
+		id[(i * 2) + 1] = val & 0xff;
+	}
+
+	return 0;
+}
+
+static ssize_t wm831x_unique_id_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct wm831x *wm831x = dev_get_drvdata(dev);
+	int i, rval;
+	char id[WM831X_UNIQUE_ID_LEN];
+	ssize_t ret = 0;
+
+	rval = wm831x_unique_id_read(wm831x, id);
+	if (rval < 0)
+		return 0;
+
+	for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++)
+		ret += sprintf(&buf[ret], "%02x", buf[i]);
+
+	ret += sprintf(&buf[ret], "\n");
+
+	return ret;
+}
+
+static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL);
+
+int wm831x_otp_init(struct wm831x *wm831x)
+{
+	int ret;
+
+	ret = device_create_file(wm831x->dev, &dev_attr_unique_id);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Unique ID attribute not created: %d\n",
+			ret);
+
+	return ret;
+}
+
+void wm831x_otp_exit(struct wm831x *wm831x)
+{
+	device_remove_file(wm831x->dev, &dev_attr_unique_id);
+}
+
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index fe24079387c..ba27c9dc1ad 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -353,15 +353,15 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq)
 }
 
 /*
- * wm8350_irq_worker actually handles the interrupts.  Since all
+ * This is a threaded IRQ handler so can access I2C/SPI.  Since all
  * interrupts are clear on read the IRQ line will be reasserted and
  * the physical IRQ will be handled again if another interrupt is
  * asserted while we run - in the normal course of events this is a
  * rare occurrence so we save I2C/SPI reads.
  */
-static void wm8350_irq_worker(struct work_struct *work)
+static irqreturn_t wm8350_irq(int irq, void *data)
 {
-	struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work);
+	struct wm8350 *wm8350 = data;
 	u16 level_one, status1, status2, comp;
 
 	/* TODO: Use block reads to improve performance? */
@@ -552,16 +552,6 @@ static void wm8350_irq_worker(struct work_struct *work)
 		}
 	}
 
-	enable_irq(wm8350->chip_irq);
-}
-
-static irqreturn_t wm8350_irq(int irq, void *data)
-{
-	struct wm8350 *wm8350 = data;
-
-	disable_irq_nosync(irq);
-	schedule_work(&wm8350->irq_work);
-
 	return IRQ_HANDLED;
 }
 
@@ -1428,9 +1418,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 
 	mutex_init(&wm8350->auxadc_mutex);
 	mutex_init(&wm8350->irq_mutex);
-	INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
 	if (irq) {
-		int flags = 0;
+		int flags = IRQF_ONESHOT;
 
 		if (pdata && pdata->irq_high) {
 			flags |= IRQF_TRIGGER_HIGH;
@@ -1444,8 +1433,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 					  WM8350_IRQ_POL);
 		}
 
-		ret = request_irq(irq, wm8350_irq, flags,
-				  "wm8350", wm8350);
+		ret = request_threaded_irq(irq, NULL, wm8350_irq, flags,
+					   "wm8350", wm8350);
 		if (ret != 0) {
 			dev_err(wm8350->dev, "Failed to request IRQ: %d\n",
 				ret);
@@ -1472,6 +1461,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 				   &(wm8350->codec.pdev));
 	wm8350_client_dev_register(wm8350, "wm8350-gpio",
 				   &(wm8350->gpio.pdev));
+	wm8350_client_dev_register(wm8350, "wm8350-hwmon",
+				   &(wm8350->hwmon.pdev));
 	wm8350_client_dev_register(wm8350, "wm8350-power",
 				   &(wm8350->power.pdev));
 	wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
@@ -1498,11 +1489,11 @@ void wm8350_device_exit(struct wm8350 *wm8350)
 	platform_device_unregister(wm8350->wdt.pdev);
 	platform_device_unregister(wm8350->rtc.pdev);
 	platform_device_unregister(wm8350->power.pdev);
+	platform_device_unregister(wm8350->hwmon.pdev);
 	platform_device_unregister(wm8350->gpio.pdev);
 	platform_device_unregister(wm8350->codec.pdev);
 
 	free_irq(wm8350->chip_irq, wm8350);
-	flush_work(&wm8350->irq_work);
 	kfree(wm8350->reg_cache);
 }
 EXPORT_SYMBOL_GPL(wm8350_device_exit);
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f4317798e47..2dc42bbf6fe 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -82,6 +82,13 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_WM831X
+	tristate "Wolfson Microelcronics WM831x PMIC regulators"
+	depends on MFD_WM831X
+	help
+	  Support the voltage and current regulators of the WM831x series
+	  of PMIC devices.
+
 config REGULATOR_WM8350
 	tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
 	depends on MFD_WM8350
@@ -117,4 +124,28 @@ config REGULATOR_LP3971
 	 Say Y here to support the voltage regulators and convertors
 	 on National Semiconductors LP3971 PMIC
 
+config REGULATOR_PCAP
+	tristate "PCAP2 regulator driver"
+	depends on EZX_PCAP
+	help
+	 This driver provides support for the voltage regulators of the
+	 PCAP2 PMIC.
+
+config REGULATOR_MC13783
+	tristate "Support regulators on Freescale MC13783 PMIC"
+	depends on MFD_MC13783
+	help
+	  Say y here to support the regulators found on the Freescale MC13783
+	  PMIC.
+
+config REGULATOR_AB3100
+	tristate "ST-Ericsson AB3100 Regulator functions"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	 These regulators correspond to functionality in the
+	 AB3100 analog baseband dealing with power regulators
+	 for the system.
+
 endif
+
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4d762c4cccf..768b3316d6e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -12,9 +12,15 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
+obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o
+obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
new file mode 100644
index 00000000000..49aeee823a2
--- /dev/null
+++ b/drivers/regulator/ab3100.c
@@ -0,0 +1,700 @@
+/*
+ * drivers/regulator/ab3100.c
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level control of the AB3100 IC Low Dropout (LDO)
+ * regulators, external regulator and buck converter
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/ab3100.h>
+
+/* LDO registers and some handy masking definitions for AB3100 */
+#define AB3100_LDO_A		0x40
+#define AB3100_LDO_C		0x41
+#define AB3100_LDO_D		0x42
+#define AB3100_LDO_E		0x43
+#define AB3100_LDO_E_SLEEP	0x44
+#define AB3100_LDO_F		0x45
+#define AB3100_LDO_G		0x46
+#define AB3100_LDO_H		0x47
+#define AB3100_LDO_H_SLEEP_MODE	0
+#define AB3100_LDO_H_SLEEP_EN	2
+#define AB3100_LDO_ON		4
+#define AB3100_LDO_H_VSEL_AC	5
+#define AB3100_LDO_K		0x48
+#define AB3100_LDO_EXT		0x49
+#define AB3100_BUCK		0x4A
+#define AB3100_BUCK_SLEEP	0x4B
+#define AB3100_REG_ON_MASK	0x10
+
+/**
+ * struct ab3100_regulator
+ * A struct passed around the individual regulator functions
+ * @platform_device: platform device holding this regulator
+ * @ab3100: handle to the AB3100 parent chip
+ * @plfdata: AB3100 platform data passed in at probe time
+ * @regreg: regulator register number in the AB3100
+ * @fixed_voltage: a fixed voltage for this regulator, if this
+ *          0 the voltages array is used instead.
+ * @typ_voltages: an array of available typical voltages for
+ *          this regulator
+ * @voltages_len: length of the array of available voltages
+ */
+struct ab3100_regulator {
+	struct regulator_dev *rdev;
+	struct ab3100 *ab3100;
+	struct ab3100_platform_data *plfdata;
+	u8 regreg;
+	int fixed_voltage;
+	int const *typ_voltages;
+	u8 voltages_len;
+};
+
+/* The order in which registers are initialized */
+static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
+	AB3100_LDO_A,
+	AB3100_LDO_C,
+	AB3100_LDO_E,
+	AB3100_LDO_E_SLEEP,
+	AB3100_LDO_F,
+	AB3100_LDO_G,
+	AB3100_LDO_H,
+	AB3100_LDO_K,
+	AB3100_LDO_EXT,
+	AB3100_BUCK,
+	AB3100_BUCK_SLEEP,
+	AB3100_LDO_D,
+};
+
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+
+static const int const ldo_e_buck_typ_voltages[] = {
+	1800000,
+	1400000,
+	1300000,
+	1200000,
+	1100000,
+	1050000,
+	900000,
+};
+
+static const int const ldo_f_typ_voltages[] = {
+	1800000,
+	1400000,
+	1300000,
+	1200000,
+	1100000,
+	1050000,
+	2500000,
+	2650000,
+};
+
+static const int const ldo_g_typ_voltages[] = {
+	2850000,
+	2750000,
+	1800000,
+	1500000,
+};
+
+static const int const ldo_h_typ_voltages[] = {
+	2750000,
+	1800000,
+	1500000,
+	1200000,
+};
+
+static const int const ldo_k_typ_voltages[] = {
+	2750000,
+	1800000,
+};
+
+
+/* The regulator devices */
+static struct ab3100_regulator
+ab3100_regulators[AB3100_NUM_REGULATORS] = {
+	{
+		.regreg = AB3100_LDO_A,
+		.fixed_voltage = LDO_A_VOLTAGE,
+	},
+	{
+		.regreg = AB3100_LDO_C,
+		.fixed_voltage = LDO_C_VOLTAGE,
+	},
+	{
+		.regreg = AB3100_LDO_D,
+		.fixed_voltage = LDO_D_VOLTAGE,
+	},
+	{
+		.regreg = AB3100_LDO_E,
+		.typ_voltages = ldo_e_buck_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_F,
+		.typ_voltages = ldo_f_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_f_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_G,
+		.typ_voltages = ldo_g_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_g_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_H,
+		.typ_voltages = ldo_h_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_h_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_K,
+		.typ_voltages = ldo_k_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_k_typ_voltages),
+	},
+	{
+		.regreg = AB3100_LDO_EXT,
+		/* No voltages for the external regulator */
+	},
+	{
+		.regreg = AB3100_BUCK,
+		.typ_voltages = ldo_e_buck_typ_voltages,
+		.voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+	},
+};
+
+/*
+ * General functions for enable, disable and is_enabled used for
+ * LDO: A,C,E,F,G,H,K,EXT and BUCK
+ */
+static int ab3100_enable_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	int err;
+	u8 regval;
+
+	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+						&regval);
+	if (err) {
+		dev_warn(&reg->dev, "failed to get regid %d value\n",
+			 abreg->regreg);
+		return err;
+	}
+
+	/* The regulator is already on, no reason to go further */
+	if (regval & AB3100_REG_ON_MASK)
+		return 0;
+
+	regval |= AB3100_REG_ON_MASK;
+
+	err = ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg,
+						regval);
+	if (err) {
+		dev_warn(&reg->dev, "failed to set regid %d value\n",
+			 abreg->regreg);
+		return err;
+	}
+
+	/* Per-regulator power on delay from spec */
+	switch (abreg->regreg) {
+	case AB3100_LDO_A: /* Fallthrough */
+	case AB3100_LDO_C: /* Fallthrough */
+	case AB3100_LDO_D: /* Fallthrough */
+	case AB3100_LDO_E: /* Fallthrough */
+	case AB3100_LDO_H: /* Fallthrough */
+	case AB3100_LDO_K:
+		udelay(200);
+		break;
+	case AB3100_LDO_F:
+		udelay(600);
+		break;
+	case AB3100_LDO_G:
+		udelay(400);
+		break;
+	case AB3100_BUCK:
+		mdelay(1);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ab3100_disable_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	int err;
+	u8 regval;
+
+	/*
+	 * LDO D is a special regulator. When it is disabled, the entire
+	 * system is shut down. So this is handled specially.
+	 */
+	if (abreg->regreg == AB3100_LDO_D) {
+		int i;
+
+		dev_info(&reg->dev, "disabling LDO D - shut down system\n");
+		/*
+		 * Set regulators to default values, ignore any errors,
+		 * we're going DOWN
+		 */
+		for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
+			(void) ab3100_set_register_interruptible(abreg->ab3100,
+					ab3100_reg_init_order[i],
+					abreg->plfdata->reg_initvals[i]);
+		}
+
+		/* Setting LDO D to 0x00 cuts the power to the SoC */
+		return ab3100_set_register_interruptible(abreg->ab3100,
+							 AB3100_LDO_D, 0x00U);
+
+	}
+
+	/*
+	 * All other regulators are handled here
+	 */
+	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+						&regval);
+	if (err) {
+		dev_err(&reg->dev, "unable to get register 0x%x\n",
+			abreg->regreg);
+		return err;
+	}
+	regval &= ~AB3100_REG_ON_MASK;
+	return ab3100_set_register_interruptible(abreg->ab3100, abreg->regreg,
+						 regval);
+}
+
+static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	u8 regval;
+	int err;
+
+	err = ab3100_get_register_interruptible(abreg->ab3100, abreg->regreg,
+						&regval);
+	if (err) {
+		dev_err(&reg->dev, "unable to get register 0x%x\n",
+			abreg->regreg);
+		return err;
+	}
+
+	return regval & AB3100_REG_ON_MASK;
+}
+
+static int ab3100_list_voltage_regulator(struct regulator_dev *reg,
+					 unsigned selector)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+
+	if (selector > abreg->voltages_len)
+		return -EINVAL;
+	return abreg->typ_voltages[selector];
+}
+
+static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	u8 regval;
+	int err;
+
+	/* Return the voltage for fixed regulators immediately */
+	if (abreg->fixed_voltage)
+		return abreg->fixed_voltage;
+
+	/*
+	 * For variable types, read out setting and index into
+	 * supplied voltage list.
+	 */
+	err = ab3100_get_register_interruptible(abreg->ab3100,
+						abreg->regreg, &regval);
+	if (err) {
+		dev_warn(&reg->dev,
+			 "failed to get regulator value in register %02x\n",
+			 abreg->regreg);
+		return err;
+	}
+
+	/* The 3 highest bits index voltages */
+	regval &= 0xE0;
+	regval >>= 5;
+
+	if (regval > abreg->voltages_len) {
+		dev_err(&reg->dev,
+			"regulator register %02x contains an illegal voltage setting\n",
+			abreg->regreg);
+		return -EINVAL;
+	}
+
+	return abreg->typ_voltages[regval];
+}
+
+static int ab3100_get_best_voltage_index(struct regulator_dev *reg,
+				   int min_uV, int max_uV)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	int i;
+	int bestmatch;
+	int bestindex;
+
+	/*
+	 * Locate the minimum voltage fitting the criteria on
+	 * this regulator. The switchable voltages are not
+	 * in strict falling order so we need to check them
+	 * all for the best match.
+	 */
+	bestmatch = INT_MAX;
+	bestindex = -1;
+	for (i = 0; i < abreg->voltages_len; i++) {
+		if (abreg->typ_voltages[i] <= max_uV &&
+		    abreg->typ_voltages[i] >= min_uV &&
+		    abreg->typ_voltages[i] < bestmatch) {
+			bestmatch = abreg->typ_voltages[i];
+			bestindex = i;
+		}
+	}
+
+	if (bestindex < 0) {
+		dev_warn(&reg->dev, "requested %d<=x<=%d uV, out of range!\n",
+			 min_uV, max_uV);
+		return -EINVAL;
+	}
+	return bestindex;
+}
+
+static int ab3100_set_voltage_regulator(struct regulator_dev *reg,
+					int min_uV, int max_uV)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	u8 regval;
+	int err;
+	int bestindex;
+
+	bestindex = ab3100_get_best_voltage_index(reg, min_uV, max_uV);
+	if (bestindex < 0)
+		return bestindex;
+
+	err = ab3100_get_register_interruptible(abreg->ab3100,
+						abreg->regreg, &regval);
+	if (err) {
+		dev_warn(&reg->dev,
+			 "failed to get regulator register %02x\n",
+			 abreg->regreg);
+		return err;
+	}
+
+	/* The highest three bits control the variable regulators */
+	regval &= ~0xE0;
+	regval |= (bestindex << 5);
+
+	err = ab3100_set_register_interruptible(abreg->ab3100,
+						abreg->regreg, regval);
+	if (err)
+		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
+			abreg->regreg);
+
+	return err;
+}
+
+static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
+						int uV)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+	u8 regval;
+	int err;
+	int bestindex;
+	u8 targetreg;
+
+	if (abreg->regreg == AB3100_LDO_E)
+		targetreg = AB3100_LDO_E_SLEEP;
+	else if (abreg->regreg == AB3100_BUCK)
+		targetreg = AB3100_BUCK_SLEEP;
+	else
+		return -EINVAL;
+
+	/* LDO E and BUCK have special suspend voltages you can set */
+	bestindex = ab3100_get_best_voltage_index(reg, uV, uV);
+
+	err = ab3100_get_register_interruptible(abreg->ab3100,
+						targetreg, &regval);
+	if (err) {
+		dev_warn(&reg->dev,
+			 "failed to get regulator register %02x\n",
+			 targetreg);
+		return err;
+	}
+
+	/* The highest three bits control the variable regulators */
+	regval &= ~0xE0;
+	regval |= (bestindex << 5);
+
+	err = ab3100_set_register_interruptible(abreg->ab3100,
+						targetreg, regval);
+	if (err)
+		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
+			abreg->regreg);
+
+	return err;
+}
+
+/*
+ * The external regulator can just define a fixed voltage.
+ */
+static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
+{
+	struct ab3100_regulator *abreg = reg->reg_data;
+
+	return abreg->plfdata->external_voltage;
+}
+
+static struct regulator_ops regulator_ops_fixed = {
+	.enable      = ab3100_enable_regulator,
+	.disable     = ab3100_disable_regulator,
+	.is_enabled  = ab3100_is_enabled_regulator,
+	.get_voltage = ab3100_get_voltage_regulator,
+};
+
+static struct regulator_ops regulator_ops_variable = {
+	.enable      = ab3100_enable_regulator,
+	.disable     = ab3100_disable_regulator,
+	.is_enabled  = ab3100_is_enabled_regulator,
+	.get_voltage = ab3100_get_voltage_regulator,
+	.set_voltage = ab3100_set_voltage_regulator,
+	.list_voltage = ab3100_list_voltage_regulator,
+};
+
+static struct regulator_ops regulator_ops_variable_sleepable = {
+	.enable      = ab3100_enable_regulator,
+	.disable     = ab3100_disable_regulator,
+	.is_enabled  = ab3100_is_enabled_regulator,
+	.get_voltage = ab3100_get_voltage_regulator,
+	.set_voltage = ab3100_set_voltage_regulator,
+	.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
+	.list_voltage = ab3100_list_voltage_regulator,
+};
+
+/*
+ * LDO EXT is an external regulator so it is really
+ * not possible to set any voltage locally here, AB3100
+ * is an on/off switch plain an simple. The external
+ * voltage is defined in the board set-up if any.
+ */
+static struct regulator_ops regulator_ops_external = {
+	.enable      = ab3100_enable_regulator,
+	.disable     = ab3100_disable_regulator,
+	.is_enabled  = ab3100_is_enabled_regulator,
+	.get_voltage = ab3100_get_voltage_regulator_external,
+};
+
+static struct regulator_desc
+ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
+	{
+		.name = "LDO_A",
+		.id   = AB3100_LDO_A,
+		.ops  = &regulator_ops_fixed,
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_C",
+		.id   = AB3100_LDO_C,
+		.ops  = &regulator_ops_fixed,
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_D",
+		.id   = AB3100_LDO_D,
+		.ops  = &regulator_ops_fixed,
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_E",
+		.id   = AB3100_LDO_E,
+		.ops  = &regulator_ops_variable_sleepable,
+		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_F",
+		.id   = AB3100_LDO_F,
+		.ops  = &regulator_ops_variable,
+		.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_G",
+		.id   = AB3100_LDO_G,
+		.ops  = &regulator_ops_variable,
+		.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_H",
+		.id   = AB3100_LDO_H,
+		.ops  = &regulator_ops_variable,
+		.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_K",
+		.id   = AB3100_LDO_K,
+		.ops  = &regulator_ops_variable,
+		.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "LDO_EXT",
+		.id   = AB3100_LDO_EXT,
+		.ops  = &regulator_ops_external,
+		.type = REGULATOR_VOLTAGE,
+	},
+	{
+		.name = "BUCK",
+		.id   = AB3100_BUCK,
+		.ops  = &regulator_ops_variable_sleepable,
+		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+		.type = REGULATOR_VOLTAGE,
+	},
+};
+
+/*
+ * NOTE: the following functions are regulators pluralis - it is the
+ * binding to the AB3100 core driver and the parent platform device
+ * for all the different regulators.
+ */
+
+static int __init ab3100_regulators_probe(struct platform_device *pdev)
+{
+	struct ab3100_platform_data *plfdata = pdev->dev.platform_data;
+	struct ab3100 *ab3100 = platform_get_drvdata(pdev);
+	int err = 0;
+	u8 data;
+	int i;
+
+	/* Check chip state */
+	err = ab3100_get_register_interruptible(ab3100,
+						AB3100_LDO_D, &data);
+	if (err) {
+		dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
+		return err;
+	}
+	if (data & 0x10)
+		dev_notice(&pdev->dev,
+			   "chip is already in active mode (Warm start)\n");
+	else
+		dev_notice(&pdev->dev,
+			   "chip is in inactive mode (Cold start)\n");
+
+	/* Set up regulators */
+	for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
+		err = ab3100_set_register_interruptible(ab3100,
+					ab3100_reg_init_order[i],
+					plfdata->reg_initvals[i]);
+		if (err) {
+			dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
+				err);
+			return err;
+		}
+	}
+
+	if (err) {
+		dev_err(&pdev->dev,
+			"LDO D regulator initialization failed with error %d\n",
+			err);
+		return err;
+	}
+
+	/* Register the regulators */
+	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
+		struct ab3100_regulator *reg = &ab3100_regulators[i];
+		struct regulator_dev *rdev;
+
+		/*
+		 * Initialize per-regulator struct.
+		 * Inherit platform data, this comes down from the
+		 * i2c boarddata, from the machine. So if you want to
+		 * see what it looks like for a certain machine, go
+		 * into the machine I2C setup.
+		 */
+		reg->ab3100 = ab3100;
+		reg->plfdata = plfdata;
+
+		/*
+		 * Register the regulator, pass around
+		 * the ab3100_regulator struct
+		 */
+		rdev = regulator_register(&ab3100_regulator_desc[i],
+					  &pdev->dev,
+					  &plfdata->reg_constraints[i],
+					  reg);
+
+		if (IS_ERR(rdev)) {
+			err = PTR_ERR(rdev);
+			dev_err(&pdev->dev,
+				"%s: failed to register regulator %s err %d\n",
+				__func__, ab3100_regulator_desc[i].name,
+				err);
+			i--;
+			/* remove the already registered regulators */
+			while (i > 0) {
+				regulator_unregister(ab3100_regulators[i].rdev);
+				i--;
+			}
+			return err;
+		}
+
+		/* Then set a pointer back to the registered regulator */
+		reg->rdev = rdev;
+	}
+
+	return 0;
+}
+
+static int __exit ab3100_regulators_remove(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
+		struct ab3100_regulator *reg = &ab3100_regulators[i];
+
+		regulator_unregister(reg->rdev);
+	}
+	return 0;
+}
+
+static struct platform_driver ab3100_regulators_driver = {
+	.driver = {
+		.name  = "ab3100-regulators",
+		.owner = THIS_MODULE,
+	},
+	.probe = ab3100_regulators_probe,
+	.remove = __exit_p(ab3100_regulators_remove),
+};
+
+static __init int ab3100_regulators_init(void)
+{
+	return platform_driver_register(&ab3100_regulators_driver);
+}
+
+static __exit void ab3100_regulators_exit(void)
+{
+	platform_driver_register(&ab3100_regulators_driver);
+}
+
+subsys_initcall(ab3100_regulators_init);
+module_exit(ab3100_regulators_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 Regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ab3100-regulators");
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 98c3a74e994..91ba9bfaa70 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1864,6 +1864,30 @@ int regulator_notifier_call_chain(struct regulator_dev *rdev,
 }
 EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
 
+/**
+ * regulator_mode_to_status - convert a regulator mode into a status
+ *
+ * @mode: Mode to convert
+ *
+ * Convert a regulator mode into a status.
+ */
+int regulator_mode_to_status(unsigned int mode)
+{
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		return REGULATOR_STATUS_FAST;
+	case REGULATOR_MODE_NORMAL:
+		return REGULATOR_STATUS_NORMAL;
+	case REGULATOR_MODE_IDLE:
+		return REGULATOR_STATUS_IDLE;
+	case REGULATOR_STATUS_STANDBY:
+		return REGULATOR_STATUS_STANDBY;
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(regulator_mode_to_status);
+
 /*
  * To avoid cluttering sysfs (and memory) with useless state, only
  * create attributes that can be meaningfully displayed.
diff --git a/drivers/regulator/mc13783.c b/drivers/regulator/mc13783.c
new file mode 100644
index 00000000000..710211f6744
--- /dev/null
+++ b/drivers/regulator/mc13783.c
@@ -0,0 +1,410 @@
+/*
+ * Regulator Driver for Freescale MC13783 PMIC
+ *
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/mc13783-private.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/driver.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+struct mc13783_regulator {
+	struct regulator_desc desc;
+	int reg;
+	int enable_bit;
+};
+
+static struct regulator_ops mc13783_regulator_ops;
+
+static struct mc13783_regulator mc13783_regulators[] = {
+	[MC13783_SW_SW3] = {
+		.desc = {
+			.name	= "SW_SW3",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_SW_SW3,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_SWITCHERS_5,
+		.enable_bit = MC13783_SWCTRL_SW3_EN,
+	},
+	[MC13783_SW_PLL] = {
+		.desc = {
+			.name	= "SW_PLL",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_SW_PLL,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_SWITCHERS_4,
+		.enable_bit = MC13783_SWCTRL_PLL_EN,
+	},
+	[MC13783_REGU_VAUDIO] = {
+		.desc = {
+			.name	= "REGU_VAUDIO",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VAUDIO,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VAUDIO_EN,
+	},
+	[MC13783_REGU_VIOHI] = {
+		.desc = {
+			.name	= "REGU_VIOHI",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VIOHI,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VIOHI_EN,
+	},
+	[MC13783_REGU_VIOLO] = {
+		.desc = {
+			.name	= "REGU_VIOLO",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VIOLO,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VIOLO_EN,
+	},
+	[MC13783_REGU_VDIG] = {
+		.desc = {
+			.name	= "REGU_VDIG",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VDIG,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VDIG_EN,
+	},
+	[MC13783_REGU_VGEN] = {
+		.desc = {
+			.name	= "REGU_VGEN",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VGEN,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VGEN_EN,
+	},
+	[MC13783_REGU_VRFDIG] = {
+		.desc = {
+			.name	= "REGU_VRFDIG",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRFDIG,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VRFDIG_EN,
+	},
+	[MC13783_REGU_VRFREF] = {
+		.desc = {
+			.name	= "REGU_VRFREF",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRFREF,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VRFREF_EN,
+	},
+	[MC13783_REGU_VRFCP] = {
+		.desc = {
+			.name	= "REGU_VRFCP",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRFCP,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_0,
+		.enable_bit = MC13783_REGCTRL_VRFCP_EN,
+	},
+	[MC13783_REGU_VSIM] = {
+		.desc = {
+			.name	= "REGU_VSIM",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VSIM,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VSIM_EN,
+	},
+	[MC13783_REGU_VESIM] = {
+		.desc = {
+			.name	= "REGU_VESIM",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VESIM,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VESIM_EN,
+	},
+	[MC13783_REGU_VCAM] = {
+		.desc = {
+			.name	= "REGU_VCAM",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VCAM,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VCAM_EN,
+	},
+	[MC13783_REGU_VRFBG] = {
+		.desc = {
+			.name	= "REGU_VRFBG",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRFBG,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VRFBG_EN,
+	},
+	[MC13783_REGU_VVIB] = {
+		.desc = {
+			.name	= "REGU_VVIB",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VVIB,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VVIB_EN,
+	},
+	[MC13783_REGU_VRF1] = {
+		.desc = {
+			.name	= "REGU_VRF1",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRF1,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VRF1_EN,
+	},
+	[MC13783_REGU_VRF2] = {
+		.desc = {
+			.name	= "REGU_VRF2",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VRF2,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VRF2_EN,
+	},
+	[MC13783_REGU_VMMC1] = {
+		.desc = {
+			.name	= "REGU_VMMC1",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VMMC1,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VMMC1_EN,
+	},
+	[MC13783_REGU_VMMC2] = {
+		.desc = {
+			.name	= "REGU_VMMC2",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_VMMC2,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_REGULATOR_MODE_1,
+		.enable_bit = MC13783_REGCTRL_VMMC2_EN,
+	},
+	[MC13783_REGU_GPO1] = {
+		.desc = {
+			.name	= "REGU_GPO1",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_GPO1,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_POWER_MISCELLANEOUS,
+		.enable_bit = MC13783_REGCTRL_GPO1_EN,
+	},
+	[MC13783_REGU_GPO2] = {
+		.desc = {
+			.name	= "REGU_GPO2",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_GPO2,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_POWER_MISCELLANEOUS,
+		.enable_bit = MC13783_REGCTRL_GPO2_EN,
+	},
+	[MC13783_REGU_GPO3] = {
+		.desc = {
+			.name	= "REGU_GPO3",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_GPO3,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_POWER_MISCELLANEOUS,
+		.enable_bit = MC13783_REGCTRL_GPO3_EN,
+	},
+	[MC13783_REGU_GPO4] = {
+		.desc = {
+			.name	= "REGU_GPO4",
+			.ops	= &mc13783_regulator_ops,
+			.type	= REGULATOR_VOLTAGE,
+			.id	= MC13783_REGU_GPO4,
+			.owner	= THIS_MODULE,
+		},
+		.reg = MC13783_REG_POWER_MISCELLANEOUS,
+		.enable_bit = MC13783_REGCTRL_GPO4_EN,
+	},
+};
+
+struct mc13783_priv {
+	struct regulator_desc desc[ARRAY_SIZE(mc13783_regulators)];
+	struct mc13783 *mc13783;
+	struct regulator_dev *regulators[0];
+};
+
+static int mc13783_enable(struct regulator_dev *rdev)
+{
+	struct mc13783_priv *priv = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
+
+	return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg,
+			mc13783_regulators[id].enable_bit,
+			mc13783_regulators[id].enable_bit);
+}
+
+static int mc13783_disable(struct regulator_dev *rdev)
+{
+	struct mc13783_priv *priv = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
+
+	return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg,
+			mc13783_regulators[id].enable_bit, 0);
+}
+
+static int mc13783_is_enabled(struct regulator_dev *rdev)
+{
+	struct mc13783_priv *priv = rdev_get_drvdata(rdev);
+	int ret, id = rdev_get_id(rdev);
+	unsigned int val;
+
+	ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val);
+	if (ret)
+		return ret;
+
+	return (val & mc13783_regulators[id].enable_bit) != 0;
+}
+
+static struct regulator_ops mc13783_regulator_ops = {
+	.enable		= mc13783_enable,
+	.disable	= mc13783_disable,
+	.is_enabled	= mc13783_is_enabled,
+};
+
+static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
+{
+	struct mc13783_priv *priv;
+	struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent);
+	struct mc13783_regulator_init_data *init_data;
+	int i, ret;
+
+	dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id);
+
+	priv = kzalloc(sizeof(*priv) + mc13783->num_regulators * sizeof(void *),
+			GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->mc13783 = mc13783;
+
+	for (i = 0; i < mc13783->num_regulators; i++) {
+		init_data = &mc13783->regulators[i];
+		priv->regulators[i] = regulator_register(
+				&mc13783_regulators[init_data->id].desc,
+				&pdev->dev, init_data->init_data, priv);
+
+		if (IS_ERR(priv->regulators[i])) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				mc13783_regulators[i].desc.name);
+			ret = PTR_ERR(priv->regulators[i]);
+			goto err;
+		}
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+err:
+	while (--i >= 0)
+		regulator_unregister(priv->regulators[i]);
+
+	kfree(priv);
+
+	return ret;
+}
+
+static int __devexit mc13783_regulator_remove(struct platform_device *pdev)
+{
+	struct mc13783_priv *priv = platform_get_drvdata(pdev);
+	struct mc13783 *mc13783 = priv->mc13783;
+	int i;
+
+	for (i = 0; i < mc13783->num_regulators; i++)
+		regulator_unregister(priv->regulators[i]);
+
+	return 0;
+}
+
+static struct platform_driver mc13783_regulator_driver = {
+	.driver	= {
+		.name	= "mc13783-regulator",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __devexit_p(mc13783_regulator_remove),
+};
+
+static int __init mc13783_regulator_init(void)
+{
+	return platform_driver_probe(&mc13783_regulator_driver,
+			mc13783_regulator_probe);
+}
+subsys_initcall(mc13783_regulator_init);
+
+static void __exit mc13783_regulator_exit(void)
+{
+	platform_driver_unregister(&mc13783_regulator_driver);
+}
+module_exit(mc13783_regulator_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de");
+MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC");
+MODULE_ALIAS("platform:mc13783-regulator");
diff --git a/drivers/regulator/pcap-regulator.c b/drivers/regulator/pcap-regulator.c
new file mode 100644
index 00000000000..33d7d899e03
--- /dev/null
+++ b/drivers/regulator/pcap-regulator.c
@@ -0,0 +1,318 @@
+/*
+ * PCAP2 Regulator Driver
+ *
+ * Copyright (c) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/ezx-pcap.h>
+
+static const u16 V1_table[] = {
+	2775, 1275, 1600, 1725, 1825, 1925, 2075, 2275,
+};
+
+static const u16 V2_table[] = {
+	2500, 2775,
+};
+
+static const u16 V3_table[] = {
+	1075, 1275, 1550, 1725, 1876, 1950, 2075, 2275,
+};
+
+static const u16 V4_table[] = {
+	1275, 1550, 1725, 1875, 1950, 2075, 2275, 2775,
+};
+
+static const u16 V5_table[] = {
+	1875, 2275, 2475, 2775,
+};
+
+static const u16 V6_table[] = {
+	2475, 2775,
+};
+
+static const u16 V7_table[] = {
+	1875, 2775,
+};
+
+#define V8_table V4_table
+
+static const u16 V9_table[] = {
+	1575, 1875, 2475, 2775,
+};
+
+static const u16 V10_table[] = {
+	5000,
+};
+
+static const u16 VAUX1_table[] = {
+	1875, 2475, 2775, 3000,
+};
+
+#define VAUX2_table VAUX1_table
+
+static const u16 VAUX3_table[] = {
+	1200, 1200, 1200, 1200, 1400, 1600, 1800, 2000,
+	2200, 2400, 2600, 2800, 3000, 3200, 3400, 3600,
+};
+
+static const u16 VAUX4_table[] = {
+	1800, 1800, 3000, 5000,
+};
+
+static const u16 VSIM_table[] = {
+	1875, 3000,
+};
+
+static const u16 VSIM2_table[] = {
+	1875,
+};
+
+static const u16 VVIB_table[] = {
+	1300, 1800, 2000, 3000,
+};
+
+static const u16 SW1_table[] = {
+	900, 950, 1000, 1050, 1100, 1150, 1200, 1250,
+	1300, 1350, 1400, 1450, 1500, 1600, 1875, 2250,
+};
+
+#define SW2_table SW1_table
+
+static const u16 SW3_table[] = {
+	4000, 4500, 5000, 5500,
+};
+
+struct pcap_regulator {
+	const u8 reg;
+	const u8 en;
+	const u8 index;
+	const u8 stby;
+	const u8 lowpwr;
+	const u8 n_voltages;
+	const u16 *voltage_table;
+};
+
+#define NA 0xff
+
+#define VREG_INFO(_vreg, _reg, _en, _index, _stby, _lowpwr)		\
+	[_vreg]	= {							\
+		.reg		= _reg,					\
+		.en		= _en,					\
+		.index		= _index,				\
+		.stby		= _stby,				\
+		.lowpwr		= _lowpwr,				\
+		.n_voltages	= ARRAY_SIZE(_vreg##_table),		\
+		.voltage_table	= _vreg##_table,			\
+	}
+
+static struct pcap_regulator vreg_table[] = {
+	VREG_INFO(V1,    PCAP_REG_VREG1,   1,  2,  18, 0),
+	VREG_INFO(V2,    PCAP_REG_VREG1,   5,  6,  19, 22),
+	VREG_INFO(V3,    PCAP_REG_VREG1,   7,  8,  20, 23),
+	VREG_INFO(V4,    PCAP_REG_VREG1,   11, 12, 21, 24),
+	/* V5 STBY and LOWPWR are on PCAP_REG_VREG2 */
+	VREG_INFO(V5,    PCAP_REG_VREG1,   15, 16, 12, 19),
+
+	VREG_INFO(V6,    PCAP_REG_VREG2,   1,  2,  14, 20),
+	VREG_INFO(V7,    PCAP_REG_VREG2,   3,  4,  15, 21),
+	VREG_INFO(V8,    PCAP_REG_VREG2,   5,  6,  16, 22),
+	VREG_INFO(V9,    PCAP_REG_VREG2,   9,  10, 17, 23),
+	VREG_INFO(V10,   PCAP_REG_VREG2,   10, NA, 18, 24),
+
+	VREG_INFO(VAUX1, PCAP_REG_AUXVREG, 1,  2,  22, 23),
+	/* VAUX2 ... VSIM2 STBY and LOWPWR are on PCAP_REG_LOWPWR */
+	VREG_INFO(VAUX2, PCAP_REG_AUXVREG, 4,  5,  0,  1),
+	VREG_INFO(VAUX3, PCAP_REG_AUXVREG, 7,  8,  2,  3),
+	VREG_INFO(VAUX4, PCAP_REG_AUXVREG, 12, 13, 4,  5),
+	VREG_INFO(VSIM,  PCAP_REG_AUXVREG, 17, 18, NA, 6),
+	VREG_INFO(VSIM2, PCAP_REG_AUXVREG, 16, NA, NA, 7),
+	VREG_INFO(VVIB,  PCAP_REG_AUXVREG, 19, 20, NA, NA),
+
+	VREG_INFO(SW1,   PCAP_REG_SWCTRL,  1,  2,  NA, NA),
+	VREG_INFO(SW2,   PCAP_REG_SWCTRL,  6,  7,  NA, NA),
+	/* SW3 STBY is on PCAP_REG_AUXVREG */
+	VREG_INFO(SW3,   PCAP_REG_SWCTRL,  11, 12, 24, NA),
+
+	/* SWxS used to control SWx voltage on standby */
+/*	VREG_INFO(SW1S,  PCAP_REG_LOWPWR,  NA, 12, NA, NA),
+	VREG_INFO(SW2S,  PCAP_REG_LOWPWR,  NA, 20, NA, NA), */
+};
+
+static int pcap_regulator_set_voltage(struct regulator_dev *rdev,
+						int min_uV, int max_uV)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+	int uV;
+	u8 i;
+
+	/* the regulator doesn't support voltage switching */
+	if (vreg->n_voltages == 1)
+		return -EINVAL;
+
+	for (i = 0; i < vreg->n_voltages; i++) {
+		/* For V1 the first is not the best match */
+		if (i == 0 && rdev_get_id(rdev) == V1)
+			i = 1;
+		else if (i + 1 == vreg->n_voltages && rdev_get_id(rdev) == V1)
+			i = 0;
+
+		uV = vreg->voltage_table[i] * 1000;
+		if (min_uV <= uV && uV <= max_uV)
+			return ezx_pcap_set_bits(pcap, vreg->reg,
+					(vreg->n_voltages - 1) << vreg->index,
+					i << vreg->index);
+
+		if (i == 0 && rdev_get_id(rdev) == V1)
+			i = vreg->n_voltages - 1;
+	}
+
+	/* the requested voltage range is not supported by this regulator */
+	return -EINVAL;
+}
+
+static int pcap_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+	u32 tmp;
+	int mV;
+
+	if (vreg->n_voltages == 1)
+		return vreg->voltage_table[0] * 1000;
+
+	ezx_pcap_read(pcap, vreg->reg, &tmp);
+	tmp = ((tmp >> vreg->index) & (vreg->n_voltages - 1));
+	mV = vreg->voltage_table[tmp];
+
+	return mV * 1000;
+}
+
+static int pcap_regulator_enable(struct regulator_dev *rdev)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+
+	if (vreg->en == NA)
+		return -EINVAL;
+
+	return ezx_pcap_set_bits(pcap, vreg->reg, 1 << vreg->en, 1 << vreg->en);
+}
+
+static int pcap_regulator_disable(struct regulator_dev *rdev)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+
+	if (vreg->en == NA)
+		return -EINVAL;
+
+	return ezx_pcap_set_bits(pcap, vreg->reg, 1 << vreg->en, 0);
+}
+
+static int pcap_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+	void *pcap = rdev_get_drvdata(rdev);
+	u32 tmp;
+
+	if (vreg->en == NA)
+		return -EINVAL;
+
+	ezx_pcap_read(pcap, vreg->reg, &tmp);
+	return (tmp >> vreg->en) & 1;
+}
+
+static int pcap_regulator_list_voltage(struct regulator_dev *rdev,
+							unsigned int index)
+{
+	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
+
+	return vreg->voltage_table[index] * 1000;
+}
+
+static struct regulator_ops pcap_regulator_ops = {
+	.list_voltage	= pcap_regulator_list_voltage,
+	.set_voltage	= pcap_regulator_set_voltage,
+	.get_voltage	= pcap_regulator_get_voltage,
+	.enable		= pcap_regulator_enable,
+	.disable	= pcap_regulator_disable,
+	.is_enabled	= pcap_regulator_is_enabled,
+};
+
+#define VREG(_vreg)						\
+	[_vreg]	= {						\
+		.name		= #_vreg,			\
+		.id		= _vreg,			\
+		.n_voltages	= ARRAY_SIZE(_vreg##_table),	\
+		.ops		= &pcap_regulator_ops,		\
+		.type		= REGULATOR_VOLTAGE,		\
+		.owner		= THIS_MODULE,			\
+	}
+
+static struct regulator_desc pcap_regulators[] = {
+	VREG(V1), VREG(V2), VREG(V3), VREG(V4), VREG(V5), VREG(V6), VREG(V7),
+	VREG(V8), VREG(V9), VREG(V10), VREG(VAUX1), VREG(VAUX2), VREG(VAUX3),
+	VREG(VAUX4), VREG(VSIM), VREG(VSIM2), VREG(VVIB), VREG(SW1), VREG(SW2),
+};
+
+static int __devinit pcap_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev;
+	void *pcap = dev_get_drvdata(pdev->dev.parent);
+
+	rdev = regulator_register(&pcap_regulators[pdev->id], &pdev->dev,
+				pdev->dev.platform_data, pcap);
+	if (IS_ERR(rdev))
+		return PTR_ERR(rdev);
+
+	platform_set_drvdata(pdev, rdev);
+
+	return 0;
+}
+
+static int __devexit pcap_regulator_remove(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+	regulator_unregister(rdev);
+
+	return 0;
+}
+
+static struct platform_driver pcap_regulator_driver = {
+	.driver = {
+		.name = "pcap-regulator",
+	},
+	.probe = pcap_regulator_probe,
+	.remove = __devexit_p(pcap_regulator_remove),
+};
+
+static int __init pcap_regulator_init(void)
+{
+	return platform_driver_register(&pcap_regulator_driver);
+}
+
+static void __exit pcap_regulator_exit(void)
+{
+	platform_driver_unregister(&pcap_regulator_driver);
+}
+
+subsys_initcall(pcap_regulator_init);
+module_exit(pcap_regulator_exit);
+
+MODULE_AUTHOR("Daniel Ribeiro <drwyrm@gmail.com>");
+MODULE_DESCRIPTION("PCAP2 Regulator Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
new file mode 100644
index 00000000000..2eefc1a0cf0
--- /dev/null
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -0,0 +1,862 @@
+/*
+ * wm831x-dcdc.c  --  DC-DC buck convertor driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_BUCKV_MAX_SELECTOR 0x68
+#define WM831X_BUCKP_MAX_SELECTOR 0x66
+
+#define WM831X_DCDC_MODE_FAST    0
+#define WM831X_DCDC_MODE_NORMAL  1
+#define WM831X_DCDC_MODE_IDLE    2
+#define WM831X_DCDC_MODE_STANDBY 3
+
+#define WM831X_DCDC_MAX_NAME 6
+
+/* Register offsets in control block */
+#define WM831X_DCDC_CONTROL_1     0
+#define WM831X_DCDC_CONTROL_2     1
+#define WM831X_DCDC_ON_CONFIG     2
+#define WM831X_DCDC_SLEEP_CONTROL 3
+
+/*
+ * Shared
+ */
+
+struct wm831x_dcdc {
+	char name[WM831X_DCDC_MAX_NAME];
+	struct regulator_desc desc;
+	int base;
+	struct wm831x *wm831x;
+	struct regulator_dev *regulator;
+};
+
+static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int reg;
+
+	reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE);
+	if (reg < 0)
+		return reg;
+
+	if (reg & mask)
+		return 1;
+	else
+		return 0;
+}
+
+static int wm831x_dcdc_enable(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+
+	return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask);
+}
+
+static int wm831x_dcdc_disable(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+
+	return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0);
+}
+
+static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev)
+
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	int val;
+
+	val = wm831x_reg_read(wm831x, reg);
+	if (val < 0)
+		return val;
+
+	val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT;
+
+	switch (val) {
+	case WM831X_DCDC_MODE_FAST:
+		return REGULATOR_MODE_FAST;
+	case WM831X_DCDC_MODE_NORMAL:
+		return REGULATOR_MODE_NORMAL;
+	case WM831X_DCDC_MODE_STANDBY:
+		return REGULATOR_MODE_STANDBY;
+	case WM831X_DCDC_MODE_IDLE:
+		return REGULATOR_MODE_IDLE;
+	default:
+		BUG();
+	}
+}
+
+static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg,
+				    unsigned int mode)
+{
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = WM831X_DCDC_MODE_FAST;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = WM831X_DCDC_MODE_NORMAL;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = WM831X_DCDC_MODE_STANDBY;
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = WM831X_DCDC_MODE_IDLE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK,
+			       val << WM831X_DC1_ON_MODE_SHIFT);
+}
+
+static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+	return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
+}
+
+static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+	return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
+}
+
+static int wm831x_dcdc_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int ret;
+
+	/* First, check for errors */
+	ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & (1 << rdev_get_id(rdev))) {
+		dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+			rdev_get_id(rdev) + 1);
+		return REGULATOR_STATUS_ERROR;
+	}
+
+	/* DCDC1 and DCDC2 can additionally detect high voltage/current */
+	if (rdev_get_id(rdev) < 2) {
+		if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) {
+			dev_dbg(wm831x->dev, "DCDC%d over voltage\n",
+				rdev_get_id(rdev) + 1);
+			return REGULATOR_STATUS_ERROR;
+		}
+
+		if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) {
+			dev_dbg(wm831x->dev, "DCDC%d over current\n",
+				rdev_get_id(rdev) + 1);
+			return REGULATOR_STATUS_ERROR;
+		}
+	}
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+	if (ret < 0)
+		return ret;
+	if (!(ret & (1 << rdev_get_id(rdev))))
+		return REGULATOR_STATUS_OFF;
+
+	/* TODO: When we handle hardware control modes so we can report the
+	 * current mode. */
+	return REGULATOR_STATUS_ON;
+}
+
+static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data)
+{
+	struct wm831x_dcdc *dcdc = data;
+
+	regulator_notifier_call_chain(dcdc->regulator,
+				      REGULATOR_EVENT_UNDER_VOLTAGE,
+				      NULL);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
+{
+	struct wm831x_dcdc *dcdc = data;
+
+	regulator_notifier_call_chain(dcdc->regulator,
+				      REGULATOR_EVENT_OVER_CURRENT,
+				      NULL);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * BUCKV specifics
+ */
+
+static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
+				      unsigned selector)
+{
+	if (selector <= 0x8)
+		return 600000;
+	if (selector <= WM831X_BUCKV_MAX_SELECTOR)
+		return 600000 + ((selector - 0x8) * 12500);
+	return -EINVAL;
+}
+
+static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
+					 int min_uV, int max_uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 vsel;
+
+	if (min_uV < 600000)
+		vsel = 0;
+	else if (min_uV <= 1800000)
+		vsel = ((min_uV - 600000) / 12500) + 8;
+	else
+		return -EINVAL;
+
+	if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+	return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
+					     int uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+	return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	int val;
+
+	val = wm831x_reg_read(wm831x, reg);
+	if (val < 0)
+		return val;
+
+	return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK);
+}
+
+/* Current limit options */
+static u16 wm831x_dcdc_ilim[] = {
+	125, 250, 375, 500, 625, 750, 875, 1000
+};
+
+static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
+					   int min_uA, int max_uA)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) {
+		if (max_uA <= wm831x_dcdc_ilim[i])
+			break;
+	}
+	if (i == ARRAY_SIZE(wm831x_dcdc_ilim))
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i);
+}
+
+static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+	int val;
+
+	val = wm831x_reg_read(wm831x, reg);
+	if (val < 0)
+		return val;
+
+	return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK];
+}
+
+static struct regulator_ops wm831x_buckv_ops = {
+	.set_voltage = wm831x_buckv_set_voltage,
+	.get_voltage = wm831x_buckv_get_voltage,
+	.list_voltage = wm831x_buckv_list_voltage,
+	.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
+	.set_current_limit = wm831x_buckv_set_current_limit,
+	.get_current_limit = wm831x_buckv_get_current_limit,
+
+	.is_enabled = wm831x_dcdc_is_enabled,
+	.enable = wm831x_dcdc_enable,
+	.disable = wm831x_dcdc_disable,
+	.get_status = wm831x_dcdc_get_status,
+	.get_mode = wm831x_dcdc_get_mode,
+	.set_mode = wm831x_dcdc_set_mode,
+	.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
+};
+
+static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+	struct wm831x_dcdc *dcdc;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+	if (pdata == NULL || pdata->dcdc[id] == NULL)
+		return -ENODEV;
+
+	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+	if (dcdc == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dcdc->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	dcdc->base = res->start;
+
+	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+	dcdc->desc.name = dcdc->name;
+	dcdc->desc.id = id;
+	dcdc->desc.type = REGULATOR_VOLTAGE;
+	dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
+	dcdc->desc.ops = &wm831x_buckv_ops;
+	dcdc->desc.owner = THIS_MODULE;
+
+	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+					     pdata->dcdc[id], dcdc);
+	if (IS_ERR(dcdc->regulator)) {
+		ret = PTR_ERR(dcdc->regulator);
+		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+				 IRQF_TRIGGER_RISING, dcdc->name,
+				 dcdc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	irq = platform_get_irq_byname(pdev, "HC");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq,
+				 IRQF_TRIGGER_RISING, dcdc->name,
+				 dcdc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
+			irq, ret);
+		goto err_uv;
+	}
+
+	platform_set_drvdata(pdev, dcdc);
+
+	return 0;
+
+err_uv:
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+err_regulator:
+	regulator_unregister(dcdc->regulator);
+err:
+	kfree(dcdc);
+	return ret;
+}
+
+static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
+{
+	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	regulator_unregister(dcdc->regulator);
+	kfree(dcdc);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_buckv_driver = {
+	.probe = wm831x_buckv_probe,
+	.remove = __devexit_p(wm831x_buckv_remove),
+	.driver		= {
+		.name	= "wm831x-buckv",
+	},
+};
+
+/*
+ * BUCKP specifics
+ */
+
+static int wm831x_buckp_list_voltage(struct regulator_dev *rdev,
+				      unsigned selector)
+{
+	if (selector <= WM831X_BUCKP_MAX_SELECTOR)
+		return 850000 + (selector * 25000);
+	else
+		return -EINVAL;
+}
+
+static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg,
+					int min_uV, int max_uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 vsel;
+
+	if (min_uV <= 34000000)
+		vsel = (min_uV - 850000) / 25000;
+	else
+		return -EINVAL;
+
+	if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_buckp_set_voltage(struct regulator_dev *rdev,
+				    int min_uV, int max_uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+	return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
+					    int uV)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+	return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	int val;
+
+	val = wm831x_reg_read(wm831x, reg);
+	if (val < 0)
+		return val;
+
+	return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK);
+}
+
+static struct regulator_ops wm831x_buckp_ops = {
+	.set_voltage = wm831x_buckp_set_voltage,
+	.get_voltage = wm831x_buckp_get_voltage,
+	.list_voltage = wm831x_buckp_list_voltage,
+	.set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
+
+	.is_enabled = wm831x_dcdc_is_enabled,
+	.enable = wm831x_dcdc_enable,
+	.disable = wm831x_dcdc_disable,
+	.get_status = wm831x_dcdc_get_status,
+	.get_mode = wm831x_dcdc_get_mode,
+	.set_mode = wm831x_dcdc_set_mode,
+	.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
+};
+
+static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+	struct wm831x_dcdc *dcdc;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+	if (pdata == NULL || pdata->dcdc[id] == NULL)
+		return -ENODEV;
+
+	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+	if (dcdc == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dcdc->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	dcdc->base = res->start;
+
+	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+	dcdc->desc.name = dcdc->name;
+	dcdc->desc.id = id;
+	dcdc->desc.type = REGULATOR_VOLTAGE;
+	dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1;
+	dcdc->desc.ops = &wm831x_buckp_ops;
+	dcdc->desc.owner = THIS_MODULE;
+
+	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+					     pdata->dcdc[id], dcdc);
+	if (IS_ERR(dcdc->regulator)) {
+		ret = PTR_ERR(dcdc->regulator);
+		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+				 IRQF_TRIGGER_RISING, dcdc->name,
+				 dcdc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, dcdc);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(dcdc->regulator);
+err:
+	kfree(dcdc);
+	return ret;
+}
+
+static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
+{
+	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	regulator_unregister(dcdc->regulator);
+	kfree(dcdc);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_buckp_driver = {
+	.probe = wm831x_buckp_probe,
+	.remove = __devexit_p(wm831x_buckp_remove),
+	.driver		= {
+		.name	= "wm831x-buckp",
+	},
+};
+
+/*
+ * DCDC boost convertors
+ */
+
+static int wm831x_boostp_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+	int ret;
+
+	/* First, check for errors */
+	ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & (1 << rdev_get_id(rdev))) {
+		dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+			rdev_get_id(rdev) + 1);
+		return REGULATOR_STATUS_ERROR;
+	}
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+	if (ret < 0)
+		return ret;
+	if (ret & (1 << rdev_get_id(rdev)))
+		return REGULATOR_STATUS_ON;
+	else
+		return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_boostp_ops = {
+	.get_status = wm831x_boostp_get_status,
+
+	.is_enabled = wm831x_dcdc_is_enabled,
+	.enable = wm831x_dcdc_enable,
+	.disable = wm831x_dcdc_disable,
+};
+
+static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+	struct wm831x_dcdc *dcdc;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+	if (pdata == NULL || pdata->dcdc[id] == NULL)
+		return -ENODEV;
+
+	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+	if (dcdc == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dcdc->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	dcdc->base = res->start;
+
+	snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+	dcdc->desc.name = dcdc->name;
+	dcdc->desc.id = id;
+	dcdc->desc.type = REGULATOR_VOLTAGE;
+	dcdc->desc.ops = &wm831x_boostp_ops;
+	dcdc->desc.owner = THIS_MODULE;
+
+	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+					     pdata->dcdc[id], dcdc);
+	if (IS_ERR(dcdc->regulator)) {
+		ret = PTR_ERR(dcdc->regulator);
+		dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+				 IRQF_TRIGGER_RISING, dcdc->name,
+				 dcdc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, dcdc);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(dcdc->regulator);
+err:
+	kfree(dcdc);
+	return ret;
+}
+
+static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
+{
+	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = dcdc->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+	regulator_unregister(dcdc->regulator);
+	kfree(dcdc);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_boostp_driver = {
+	.probe = wm831x_boostp_probe,
+	.remove = __devexit_p(wm831x_boostp_remove),
+	.driver		= {
+		.name	= "wm831x-boostp",
+	},
+};
+
+/*
+ * External Power Enable
+ *
+ * These aren't actually DCDCs but look like them in hardware so share
+ * code.
+ */
+
+#define WM831X_EPE_BASE 6
+
+static struct regulator_ops wm831x_epe_ops = {
+	.is_enabled = wm831x_dcdc_is_enabled,
+	.enable = wm831x_dcdc_enable,
+	.disable = wm831x_dcdc_disable,
+	.get_status = wm831x_dcdc_get_status,
+};
+
+static __devinit int wm831x_epe_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->epe);
+	struct wm831x_dcdc *dcdc;
+	int ret;
+
+	dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1);
+
+	if (pdata == NULL || pdata->epe[id] == NULL)
+		return -ENODEV;
+
+	dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+	if (dcdc == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dcdc->wm831x = wm831x;
+
+	/* For current parts this is correct; probably need to revisit
+	 * in future.
+	 */
+	snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1);
+	dcdc->desc.name = dcdc->name;
+	dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */
+	dcdc->desc.ops = &wm831x_epe_ops;
+	dcdc->desc.type = REGULATOR_VOLTAGE;
+	dcdc->desc.owner = THIS_MODULE;
+
+	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+					     pdata->epe[id], dcdc);
+	if (IS_ERR(dcdc->regulator)) {
+		ret = PTR_ERR(dcdc->regulator);
+		dev_err(wm831x->dev, "Failed to register EPE%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, dcdc);
+
+	return 0;
+
+err:
+	kfree(dcdc);
+	return ret;
+}
+
+static __devexit int wm831x_epe_remove(struct platform_device *pdev)
+{
+	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+
+	regulator_unregister(dcdc->regulator);
+	kfree(dcdc);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_epe_driver = {
+	.probe = wm831x_epe_probe,
+	.remove = __devexit_p(wm831x_epe_remove),
+	.driver		= {
+		.name	= "wm831x-epe",
+	},
+};
+
+static int __init wm831x_dcdc_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&wm831x_buckv_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x BUCKV driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_buckp_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_boostp_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x BOOST driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_epe_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x EPE driver: %d\n", ret);
+
+	return 0;
+}
+subsys_initcall(wm831x_dcdc_init);
+
+static void __exit wm831x_dcdc_exit(void)
+{
+	platform_driver_unregister(&wm831x_epe_driver);
+	platform_driver_unregister(&wm831x_boostp_driver);
+	platform_driver_unregister(&wm831x_buckp_driver);
+	platform_driver_unregister(&wm831x_buckv_driver);
+}
+module_exit(wm831x_dcdc_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x DC-DC convertor driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-buckv");
+MODULE_ALIAS("platform:wm831x-buckp");
diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
new file mode 100644
index 00000000000..1d8d9879d3a
--- /dev/null
+++ b/drivers/regulator/wm831x-isink.c
@@ -0,0 +1,260 @@
+/*
+ * wm831x-isink.c  --  Current sink driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_ISINK_MAX_NAME 7
+
+struct wm831x_isink {
+	char name[WM831X_ISINK_MAX_NAME];
+	struct regulator_desc desc;
+	int reg;
+	struct wm831x *wm831x;
+	struct regulator_dev *regulator;
+};
+
+static int wm831x_isink_enable(struct regulator_dev *rdev)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret;
+
+	/* We have a two stage enable: first start the ISINK... */
+	ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA,
+			      WM831X_CS1_ENA);
+	if (ret != 0)
+		return ret;
+
+	/* ...then enable drive */
+	ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE,
+			      WM831X_CS1_DRIVE);
+	if (ret != 0)
+		wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+
+	return ret;
+
+}
+
+static int wm831x_isink_disable(struct regulator_dev *rdev)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret;
+
+	ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+
+}
+
+static int wm831x_isink_is_enabled(struct regulator_dev *rdev)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, isink->reg);
+	if (ret < 0)
+		return ret;
+
+	if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) ==
+	    (WM831X_CS1_ENA | WM831X_CS1_DRIVE))
+		return 1;
+	else
+		return 0;
+}
+
+static int wm831x_isink_set_current(struct regulator_dev *rdev,
+				    int min_uA, int max_uA)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) {
+		int val = wm831x_isinkv_values[i];
+		if (min_uA >= val && val <= max_uA) {
+			ret = wm831x_set_bits(wm831x, isink->reg,
+					      WM831X_CS1_ISEL_MASK, i);
+			return ret;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int wm831x_isink_get_current(struct regulator_dev *rdev)
+{
+	struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = isink->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, isink->reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= WM831X_CS1_ISEL_MASK;
+	if (ret > WM831X_ISINK_MAX_ISEL)
+		ret = WM831X_ISINK_MAX_ISEL;
+
+	return wm831x_isinkv_values[ret];
+}
+
+static struct regulator_ops wm831x_isink_ops = {
+	.is_enabled = wm831x_isink_is_enabled,
+	.enable = wm831x_isink_enable,
+	.disable = wm831x_isink_disable,
+	.set_current_limit = wm831x_isink_set_current,
+	.get_current_limit = wm831x_isink_get_current,
+};
+
+static irqreturn_t wm831x_isink_irq(int irq, void *data)
+{
+	struct wm831x_isink *isink = data;
+
+	regulator_notifier_call_chain(isink->regulator,
+				      REGULATOR_EVENT_OVER_CURRENT,
+				      NULL);
+
+	return IRQ_HANDLED;
+}
+
+
+static __devinit int wm831x_isink_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	struct wm831x_isink *isink;
+	int id = pdev->id % ARRAY_SIZE(pdata->isink);
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1);
+
+	if (pdata == NULL || pdata->isink[id] == NULL)
+		return -ENODEV;
+
+	isink = kzalloc(sizeof(struct wm831x_isink), GFP_KERNEL);
+	if (isink == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	isink->reg = res->start;
+
+	/* For current parts this is correct; probably need to revisit
+	 * in future.
+	 */
+	snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1);
+	isink->desc.name = isink->name;
+	isink->desc.id = id;
+	isink->desc.ops = &wm831x_isink_ops;
+	isink->desc.type = REGULATOR_CURRENT;
+	isink->desc.owner = THIS_MODULE;
+
+	isink->regulator = regulator_register(&isink->desc, &pdev->dev,
+					     pdata->isink[id], isink);
+	if (IS_ERR(isink->regulator)) {
+		ret = PTR_ERR(isink->regulator);
+		dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	ret = wm831x_request_irq(wm831x, irq, wm831x_isink_irq,
+				 IRQF_TRIGGER_RISING, isink->name,
+				 isink);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, isink);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(isink->regulator);
+err:
+	kfree(isink);
+	return ret;
+}
+
+static __devexit int wm831x_isink_remove(struct platform_device *pdev)
+{
+	struct wm831x_isink *isink = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = isink->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink);
+
+	regulator_unregister(isink->regulator);
+	kfree(isink);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_isink_driver = {
+	.probe = wm831x_isink_probe,
+	.remove = __devexit_p(wm831x_isink_remove),
+	.driver		= {
+		.name	= "wm831x-isink",
+	},
+};
+
+static int __init wm831x_isink_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&wm831x_isink_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x ISINK driver: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(wm831x_isink_init);
+
+static void __exit wm831x_isink_exit(void)
+{
+	platform_driver_unregister(&wm831x_isink_driver);
+}
+module_exit(wm831x_isink_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x current sink driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-isink");
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
new file mode 100644
index 00000000000..bb61aede480
--- /dev/null
+++ b/drivers/regulator/wm831x-ldo.c
@@ -0,0 +1,852 @@
+/*
+ * wm831x-ldo.c  --  LDO driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_LDO_MAX_NAME 6
+
+#define WM831X_LDO_CONTROL       0
+#define WM831X_LDO_ON_CONTROL    1
+#define WM831X_LDO_SLEEP_CONTROL 2
+
+#define WM831X_ALIVE_LDO_ON_CONTROL    0
+#define WM831X_ALIVE_LDO_SLEEP_CONTROL 1
+
+struct wm831x_ldo {
+	char name[WM831X_LDO_MAX_NAME];
+	struct regulator_desc desc;
+	int base;
+	struct wm831x *wm831x;
+	struct regulator_dev *regulator;
+};
+
+/*
+ * Shared
+ */
+
+static int wm831x_ldo_is_enabled(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int reg;
+
+	reg = wm831x_reg_read(wm831x, WM831X_LDO_ENABLE);
+	if (reg < 0)
+		return reg;
+
+	if (reg & mask)
+		return 1;
+	else
+		return 0;
+}
+
+static int wm831x_ldo_enable(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+
+	return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, mask);
+}
+
+static int wm831x_ldo_disable(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+
+	return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, 0);
+}
+
+static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
+{
+	struct wm831x_ldo *ldo = data;
+
+	regulator_notifier_call_chain(ldo->regulator,
+				      REGULATOR_EVENT_UNDER_VOLTAGE,
+				      NULL);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * General purpose LDOs
+ */
+
+#define WM831X_GP_LDO_SELECTOR_LOW 0xe
+#define WM831X_GP_LDO_MAX_SELECTOR 0x1f
+
+static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
+				      unsigned int selector)
+{
+	/* 0.9-1.6V in 50mV steps */
+	if (selector <= WM831X_GP_LDO_SELECTOR_LOW)
+		return 900000 + (selector * 50000);
+	/* 1.7-3.3V in 50mV steps */
+	if (selector <= WM831X_GP_LDO_MAX_SELECTOR)
+		return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW)
+				  * 100000);
+	return -EINVAL;
+}
+
+static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
+					 int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int vsel, ret;
+
+	if (min_uV < 900000)
+		vsel = 0;
+	else if (min_uV < 1700000)
+		vsel = ((min_uV - 900000) / 50000);
+	else
+		vsel = ((min_uV - 1700000) / 100000)
+			+ WM831X_GP_LDO_SELECTOR_LOW + 1;
+
+	ret = wm831x_gp_ldo_list_voltage(rdev, vsel);
+	if (ret < 0)
+		return ret;
+	if (ret < min_uV || ret > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+
+	return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
+					     int uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+	return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= WM831X_LDO1_ON_VSEL_MASK;
+
+	return wm831x_gp_ldo_list_voltage(rdev, ret);
+}
+
+static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	unsigned int ret;
+
+	ret = wm831x_reg_read(wm831x, on_reg);
+	if (ret < 0)
+		return 0;
+
+	if (!(ret & WM831X_LDO1_ON_MODE))
+		return REGULATOR_MODE_NORMAL;
+
+	ret = wm831x_reg_read(wm831x, ctrl_reg);
+	if (ret < 0)
+		return 0;
+
+	if (ret & WM831X_LDO1_LP_MODE)
+		return REGULATOR_MODE_STANDBY;
+	else
+		return REGULATOR_MODE_IDLE;
+}
+
+static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev,
+				  unsigned int mode)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	int ret;
+
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		ret = wm831x_set_bits(wm831x, on_reg,
+				      WM831X_LDO1_ON_MODE, 0);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case REGULATOR_MODE_IDLE:
+		ret = wm831x_set_bits(wm831x, ctrl_reg,
+				      WM831X_LDO1_LP_MODE,
+				      WM831X_LDO1_LP_MODE);
+		if (ret < 0)
+			return ret;
+
+		ret = wm831x_set_bits(wm831x, on_reg,
+				      WM831X_LDO1_ON_MODE,
+				      WM831X_LDO1_ON_MODE);
+		if (ret < 0)
+			return ret;
+
+	case REGULATOR_MODE_STANDBY:
+		ret = wm831x_set_bits(wm831x, ctrl_reg,
+				      WM831X_LDO1_LP_MODE, 0);
+		if (ret < 0)
+			return ret;
+
+		ret = wm831x_set_bits(wm831x, on_reg,
+				      WM831X_LDO1_ON_MODE,
+				      WM831X_LDO1_ON_MODE);
+		if (ret < 0)
+			return ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int ret;
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+	if (ret < 0)
+		return ret;
+	if (!(ret & mask))
+		return REGULATOR_STATUS_OFF;
+
+	/* Is it reporting under voltage? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+	if (ret & mask)
+		return REGULATOR_STATUS_ERROR;
+
+	ret = wm831x_gp_ldo_get_mode(rdev);
+	if (ret < 0)
+		return ret;
+	else
+		return regulator_mode_to_status(ret);
+}
+
+static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
+						   int input_uV,
+						   int output_uV, int load_uA)
+{
+	if (load_uA < 20000)
+		return REGULATOR_MODE_STANDBY;
+	if (load_uA < 50000)
+		return REGULATOR_MODE_IDLE;
+	return REGULATOR_MODE_NORMAL;
+}
+
+
+static struct regulator_ops wm831x_gp_ldo_ops = {
+	.list_voltage = wm831x_gp_ldo_list_voltage,
+	.get_voltage = wm831x_gp_ldo_get_voltage,
+	.set_voltage = wm831x_gp_ldo_set_voltage,
+	.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
+	.get_mode = wm831x_gp_ldo_get_mode,
+	.set_mode = wm831x_gp_ldo_set_mode,
+	.get_status = wm831x_gp_ldo_get_status,
+	.get_optimum_mode = wm831x_gp_ldo_get_optimum_mode,
+
+	.is_enabled = wm831x_ldo_is_enabled,
+	.enable = wm831x_ldo_enable,
+	.disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+	struct wm831x_ldo *ldo;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+	if (pdata == NULL || pdata->ldo[id] == NULL)
+		return -ENODEV;
+
+	ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+	if (ldo == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	ldo->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	ldo->base = res->start;
+
+	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+	ldo->desc.name = ldo->name;
+	ldo->desc.id = id;
+	ldo->desc.type = REGULATOR_VOLTAGE;
+	ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1;
+	ldo->desc.ops = &wm831x_gp_ldo_ops;
+	ldo->desc.owner = THIS_MODULE;
+
+	ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+					     pdata->ldo[id], ldo);
+	if (IS_ERR(ldo->regulator)) {
+		ret = PTR_ERR(ldo->regulator);
+		dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
+				 IRQF_TRIGGER_RISING, ldo->name,
+				 ldo);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(ldo->regulator);
+err:
+	kfree(ldo);
+	return ret;
+}
+
+static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
+{
+	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = ldo->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+	regulator_unregister(ldo->regulator);
+	kfree(ldo);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_gp_ldo_driver = {
+	.probe = wm831x_gp_ldo_probe,
+	.remove = __devexit_p(wm831x_gp_ldo_remove),
+	.driver		= {
+		.name	= "wm831x-ldo",
+	},
+};
+
+/*
+ * Analogue LDOs
+ */
+
+
+#define WM831X_ALDO_SELECTOR_LOW 0xc
+#define WM831X_ALDO_MAX_SELECTOR 0x1f
+
+static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
+				      unsigned int selector)
+{
+	/* 1-1.6V in 50mV steps */
+	if (selector <= WM831X_ALDO_SELECTOR_LOW)
+		return 1000000 + (selector * 50000);
+	/* 1.7-3.5V in 50mV steps */
+	if (selector <= WM831X_ALDO_MAX_SELECTOR)
+		return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW)
+				  * 100000);
+	return -EINVAL;
+}
+
+static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
+					 int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int vsel, ret;
+
+	if (min_uV < 1000000)
+		vsel = 0;
+	else if (min_uV < 1700000)
+		vsel = ((min_uV - 1000000) / 50000);
+	else
+		vsel = ((min_uV - 1700000) / 100000)
+			+ WM831X_ALDO_SELECTOR_LOW + 1;
+
+	ret = wm831x_aldo_list_voltage(rdev, vsel);
+	if (ret < 0)
+		return ret;
+	if (ret < min_uV || ret > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_aldo_set_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+
+	return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
+					     int uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+	return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_aldo_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= WM831X_LDO7_ON_VSEL_MASK;
+
+	return wm831x_aldo_list_voltage(rdev, ret);
+}
+
+static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	unsigned int ret;
+
+	ret = wm831x_reg_read(wm831x, on_reg);
+	if (ret < 0)
+		return 0;
+
+	if (ret & WM831X_LDO7_ON_MODE)
+		return REGULATOR_MODE_IDLE;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int wm831x_aldo_set_mode(struct regulator_dev *rdev,
+				  unsigned int mode)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+	int ret;
+
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		ret = wm831x_set_bits(wm831x, on_reg,
+				      WM831X_LDO7_ON_MODE, 0);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case REGULATOR_MODE_IDLE:
+		ret = wm831x_set_bits(wm831x, ctrl_reg,
+				      WM831X_LDO7_ON_MODE,
+				      WM831X_LDO7_ON_MODE);
+		if (ret < 0)
+			return ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wm831x_aldo_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int ret;
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+	if (ret < 0)
+		return ret;
+	if (!(ret & mask))
+		return REGULATOR_STATUS_OFF;
+
+	/* Is it reporting under voltage? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+	if (ret & mask)
+		return REGULATOR_STATUS_ERROR;
+
+	ret = wm831x_aldo_get_mode(rdev);
+	if (ret < 0)
+		return ret;
+	else
+		return regulator_mode_to_status(ret);
+}
+
+static struct regulator_ops wm831x_aldo_ops = {
+	.list_voltage = wm831x_aldo_list_voltage,
+	.get_voltage = wm831x_aldo_get_voltage,
+	.set_voltage = wm831x_aldo_set_voltage,
+	.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
+	.get_mode = wm831x_aldo_get_mode,
+	.set_mode = wm831x_aldo_set_mode,
+	.get_status = wm831x_aldo_get_status,
+
+	.is_enabled = wm831x_ldo_is_enabled,
+	.enable = wm831x_ldo_enable,
+	.disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+	struct wm831x_ldo *ldo;
+	struct resource *res;
+	int ret, irq;
+
+	dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+	if (pdata == NULL || pdata->ldo[id] == NULL)
+		return -ENODEV;
+
+	ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+	if (ldo == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	ldo->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	ldo->base = res->start;
+
+	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+	ldo->desc.name = ldo->name;
+	ldo->desc.id = id;
+	ldo->desc.type = REGULATOR_VOLTAGE;
+	ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1;
+	ldo->desc.ops = &wm831x_aldo_ops;
+	ldo->desc.owner = THIS_MODULE;
+
+	ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+					     pdata->ldo[id], ldo);
+	if (IS_ERR(ldo->regulator)) {
+		ret = PTR_ERR(ldo->regulator);
+		dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "UV");
+	ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
+				 IRQF_TRIGGER_RISING, ldo->name,
+				 ldo);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+			irq, ret);
+		goto err_regulator;
+	}
+
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(ldo->regulator);
+err:
+	kfree(ldo);
+	return ret;
+}
+
+static __devexit int wm831x_aldo_remove(struct platform_device *pdev)
+{
+	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = ldo->wm831x;
+
+	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+	regulator_unregister(ldo->regulator);
+	kfree(ldo);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_aldo_driver = {
+	.probe = wm831x_aldo_probe,
+	.remove = __devexit_p(wm831x_aldo_remove),
+	.driver		= {
+		.name	= "wm831x-aldo",
+	},
+};
+
+/*
+ * Alive LDO
+ */
+
+#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf
+
+static int wm831x_alive_ldo_list_voltage(struct regulator_dev *rdev,
+				      unsigned int selector)
+{
+	/* 0.8-1.55V in 50mV steps */
+	if (selector <= WM831X_ALIVE_LDO_MAX_SELECTOR)
+		return 800000 + (selector * 50000);
+	return -EINVAL;
+}
+
+static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev,
+					    int reg,
+					    int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int vsel, ret;
+
+	vsel = (min_uV - 800000) / 50000;
+
+	ret = wm831x_alive_ldo_list_voltage(rdev, vsel);
+	if (ret < 0)
+		return ret;
+	if (ret < min_uV || ret > max_uV)
+		return -EINVAL;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev,
+				     int min_uV, int max_uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
+
+	return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
+					     int uV)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
+
+	return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= WM831X_LDO11_ON_VSEL_MASK;
+
+	return wm831x_alive_ldo_list_voltage(rdev, ret);
+}
+
+static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
+{
+	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = ldo->wm831x;
+	int mask = 1 << rdev_get_id(rdev);
+	int ret;
+
+	/* Is the regulator on? */
+	ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+	if (ret < 0)
+		return ret;
+	if (ret & mask)
+		return REGULATOR_STATUS_ON;
+	else
+		return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_alive_ldo_ops = {
+	.list_voltage = wm831x_alive_ldo_list_voltage,
+	.get_voltage = wm831x_alive_ldo_get_voltage,
+	.set_voltage = wm831x_alive_ldo_set_voltage,
+	.set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
+	.get_status = wm831x_alive_ldo_get_status,
+
+	.is_enabled = wm831x_ldo_is_enabled,
+	.enable = wm831x_ldo_enable,
+	.disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+	int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+	struct wm831x_ldo *ldo;
+	struct resource *res;
+	int ret;
+
+	dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+	if (pdata == NULL || pdata->ldo[id] == NULL)
+		return -ENODEV;
+
+	ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+	if (ldo == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	ldo->wm831x = wm831x;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	ldo->base = res->start;
+
+	snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+	ldo->desc.name = ldo->name;
+	ldo->desc.id = id;
+	ldo->desc.type = REGULATOR_VOLTAGE;
+	ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1;
+	ldo->desc.ops = &wm831x_alive_ldo_ops;
+	ldo->desc.owner = THIS_MODULE;
+
+	ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+					     pdata->ldo[id], ldo);
+	if (IS_ERR(ldo->regulator)) {
+		ret = PTR_ERR(ldo->regulator);
+		dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+			id + 1, ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, ldo);
+
+	return 0;
+
+err:
+	kfree(ldo);
+	return ret;
+}
+
+static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev)
+{
+	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+
+	regulator_unregister(ldo->regulator);
+	kfree(ldo);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_alive_ldo_driver = {
+	.probe = wm831x_alive_ldo_probe,
+	.remove = __devexit_p(wm831x_alive_ldo_remove),
+	.driver		= {
+		.name	= "wm831x-alive-ldo",
+	},
+};
+
+static int __init wm831x_ldo_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&wm831x_gp_ldo_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x GP LDO driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_aldo_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x ALDO driver: %d\n", ret);
+
+	ret = platform_driver_register(&wm831x_alive_ldo_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM831x alive LDO driver: %d\n",
+		       ret);
+
+	return 0;
+}
+subsys_initcall(wm831x_ldo_init);
+
+static void __exit wm831x_ldo_exit(void)
+{
+	platform_driver_unregister(&wm831x_alive_ldo_driver);
+	platform_driver_unregister(&wm831x_aldo_driver);
+	platform_driver_unregister(&wm831x_gp_ldo_driver);
+}
+module_exit(wm831x_ldo_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x LDO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-ldo");
+MODULE_ALIAS("platform:wm831x-aldo");
+MODULE_ALIAS("platform:wm831x-aliveldo");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 81adbdbd504..73771b09fbd 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -518,6 +518,16 @@ config RTC_DRV_V3020
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-v3020.
 
+config RTC_DRV_WM831X
+	tristate "Wolfson Microelectronics WM831x RTC"
+	depends on MFD_WM831X
+	help
+	  If you say yes here you will get support for the RTC subsystem
+	  of the Wolfson Microelectronics WM831X series PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-wm831x".
+
 config RTC_DRV_WM8350
 	tristate "Wolfson Microelectronics WM8350 RTC"
 	depends on MFD_WM8350
@@ -535,6 +545,15 @@ config RTC_DRV_PCF50633
 	  If you say yes here you get support for the RTC subsystem of the
 	  NXP PCF50633 used in embedded systems.
 
+config RTC_DRV_AB3100
+	tristate "ST-Ericsson AB3100 RTC"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	  Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
+	  support. This chip contains a battery- and capacitor-backed RTC.
+
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_OMAP
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 3c0f2b2ac92..5e152ffe505 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -17,6 +17,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
 
 # Keep the list ordered.
 
+obj-$(CONFIG_RTC_DRV_AB3100)	+= rtc-ab3100.o
 obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
 obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
 obj-$(CONFIG_RTC_DRV_AT91SAM9)	+= rtc-at91sam9.o
@@ -74,6 +75,7 @@ obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl4030.o
 obj-$(CONFIG_RTC_DRV_TX4939)	+= rtc-tx4939.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
+obj-$(CONFIG_RTC_DRV_WM831X)	+= rtc-wm831x.o
 obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
 obj-$(CONFIG_RTC_DRV_PCF50633)	+= rtc-pcf50633.o
diff --git a/drivers/rtc/rtc-ab3100.c b/drivers/rtc/rtc-ab3100.c
new file mode 100644
index 00000000000..4704aac2b5a
--- /dev/null
+++ b/drivers/rtc/rtc-ab3100.c
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * RTC clock driver for the AB3100 Analog Baseband Chip
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/mfd/ab3100.h>
+
+/* Clock rate in Hz */
+#define AB3100_RTC_CLOCK_RATE	32768
+
+/*
+ * The AB3100 RTC registers. These are the same for
+ * AB3000 and AB3100.
+ * Control register:
+ * Bit 0: RTC Monitor cleared=0, active=1, if you set it
+ *        to 1 it remains active until RTC power is lost.
+ * Bit 1: 32 kHz Oscillator, 0 = on, 1 = bypass
+ * Bit 2: Alarm on, 0 = off, 1 = on
+ * Bit 3: 32 kHz buffer disabling, 0 = enabled, 1 = disabled
+ */
+#define AB3100_RTC		0x53
+/* default setting, buffer disabled, alarm on */
+#define RTC_SETTING		0x30
+/* Alarm when AL0-AL3 == TI0-TI3  */
+#define AB3100_AL0		0x56
+#define AB3100_AL1		0x57
+#define AB3100_AL2		0x58
+#define AB3100_AL3		0x59
+/* This 48-bit register that counts up at 32768 Hz */
+#define AB3100_TI0		0x5a
+#define AB3100_TI1		0x5b
+#define AB3100_TI2		0x5c
+#define AB3100_TI3		0x5d
+#define AB3100_TI4		0x5e
+#define AB3100_TI5		0x5f
+
+/*
+ * RTC clock functions and device struct declaration
+ */
+static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+	u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2,
+		     AB3100_TI3, AB3100_TI4, AB3100_TI5};
+	unsigned char buf[6];
+	u64 fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2;
+	int err = 0;
+	int i;
+
+	buf[0] = (fat_time) & 0xFF;
+	buf[1] = (fat_time >> 8) & 0xFF;
+	buf[2] = (fat_time >> 16) & 0xFF;
+	buf[3] = (fat_time >> 24) & 0xFF;
+	buf[4] = (fat_time >> 32) & 0xFF;
+	buf[5] = (fat_time >> 40) & 0xFF;
+
+	for (i = 0; i < 6; i++) {
+		err = ab3100_set_register_interruptible(ab3100_data,
+							regs[i], buf[i]);
+		if (err)
+			return err;
+	}
+
+	/* Set the flag to mark that the clock is now set */
+	return ab3100_mask_and_set_register_interruptible(ab3100_data,
+							  AB3100_RTC,
+							  0xFE, 0x01);
+
+}
+
+static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+	unsigned long time;
+	u8 rtcval;
+	int err;
+
+	err = ab3100_get_register_interruptible(ab3100_data,
+						AB3100_RTC, &rtcval);
+	if (err)
+		return err;
+
+	if (!(rtcval & 0x01)) {
+		dev_info(dev, "clock not set (lost power)");
+		return -EINVAL;
+	} else {
+		u64 fat_time;
+		u8 buf[6];
+
+		/* Read out time registers */
+		err = ab3100_get_register_page_interruptible(ab3100_data,
+							     AB3100_TI0,
+							     buf, 6);
+		if (err != 0)
+			return err;
+
+		fat_time = ((u64) buf[5] << 40) | ((u64) buf[4] << 32) |
+			((u64) buf[3] << 24) | ((u64) buf[2] << 16) |
+			((u64) buf[1] << 8) | (u64) buf[0];
+		time = (unsigned long) (fat_time /
+					(u64) (AB3100_RTC_CLOCK_RATE * 2));
+	}
+
+	rtc_time_to_tm(time, tm);
+
+	return rtc_valid_tm(tm);
+}
+
+static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+	unsigned long time;
+	u64 fat_time;
+	u8 buf[6];
+	u8 rtcval;
+	int err;
+
+	/* Figure out if alarm is enabled or not */
+	err = ab3100_get_register_interruptible(ab3100_data,
+						AB3100_RTC, &rtcval);
+	if (err)
+		return err;
+	if (rtcval & 0x04)
+		alarm->enabled = 1;
+	else
+		alarm->enabled = 0;
+	/* No idea how this could be represented */
+	alarm->pending = 0;
+	/* Read out alarm registers, only 4 bytes */
+	err = ab3100_get_register_page_interruptible(ab3100_data,
+						     AB3100_AL0, buf, 4);
+	if (err)
+		return err;
+	fat_time = ((u64) buf[3] << 40) | ((u64) buf[2] << 32) |
+		((u64) buf[1] << 24) | ((u64) buf[0] << 16);
+	time = (unsigned long) (fat_time / (u64) (AB3100_RTC_CLOCK_RATE * 2));
+
+	rtc_time_to_tm(time, &alarm->time);
+
+	return rtc_valid_tm(&alarm->time);
+}
+
+static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+	u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3};
+	unsigned char buf[4];
+	unsigned long secs;
+	u64 fat_time;
+	int err;
+	int i;
+
+	rtc_tm_to_time(&alarm->time, &secs);
+	fat_time = (u64) secs * AB3100_RTC_CLOCK_RATE * 2;
+	buf[0] = (fat_time >> 16) & 0xFF;
+	buf[1] = (fat_time >> 24) & 0xFF;
+	buf[2] = (fat_time >> 32) & 0xFF;
+	buf[3] = (fat_time >> 40) & 0xFF;
+
+	/* Set the alarm */
+	for (i = 0; i < 4; i++) {
+		err = ab3100_set_register_interruptible(ab3100_data,
+							regs[i], buf[i]);
+		if (err)
+			return err;
+	}
+	/* Then enable the alarm */
+	return ab3100_mask_and_set_register_interruptible(ab3100_data,
+							  AB3100_RTC, ~(1 << 2),
+							  alarm->enabled << 2);
+}
+
+static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ab3100 *ab3100_data = dev_get_drvdata(dev);
+
+	/*
+	 * It's not possible to enable/disable the alarm IRQ for this RTC.
+	 * It does not actually trigger any IRQ: instead its only function is
+	 * to power up the system, if it wasn't on. This will manifest as
+	 * a "power up cause" in the AB3100 power driver (battery charging etc)
+	 * and need to be handled there instead.
+	 */
+	if (enabled)
+		return ab3100_mask_and_set_register_interruptible(ab3100_data,
+						    AB3100_RTC, ~(1 << 2),
+						    1 << 2);
+	else
+		return ab3100_mask_and_set_register_interruptible(ab3100_data,
+						    AB3100_RTC, ~(1 << 2),
+						    0);
+}
+
+static const struct rtc_class_ops ab3100_rtc_ops = {
+	.read_time	= ab3100_rtc_read_time,
+	.set_mmss	= ab3100_rtc_set_mmss,
+	.read_alarm	= ab3100_rtc_read_alarm,
+	.set_alarm	= ab3100_rtc_set_alarm,
+	.alarm_irq_enable = ab3100_rtc_irq_enable,
+};
+
+static int __init ab3100_rtc_probe(struct platform_device *pdev)
+{
+	int err;
+	u8 regval;
+	struct rtc_device *rtc;
+	struct ab3100 *ab3100_data = platform_get_drvdata(pdev);
+
+	/* The first RTC register needs special treatment */
+	err = ab3100_get_register_interruptible(ab3100_data,
+						AB3100_RTC, &regval);
+	if (err) {
+		dev_err(&pdev->dev, "unable to read RTC register\n");
+		return -ENODEV;
+	}
+
+	if ((regval & 0xFE) != RTC_SETTING) {
+		dev_warn(&pdev->dev, "not default value in RTC reg 0x%x\n",
+			 regval);
+	}
+
+	if ((regval & 1) == 0) {
+		/*
+		 * Set bit to detect power loss.
+		 * This bit remains until RTC power is lost.
+		 */
+		regval = 1 | RTC_SETTING;
+		err = ab3100_set_register_interruptible(ab3100_data,
+							AB3100_RTC, regval);
+		/* Ignore any error on this write */
+	}
+
+	rtc = rtc_device_register("ab3100-rtc", &pdev->dev, &ab3100_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		err = PTR_ERR(rtc);
+		return err;
+	}
+
+	return 0;
+}
+
+static int __exit ab3100_rtc_remove(struct platform_device *pdev)
+{
+	struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+	rtc_device_unregister(rtc);
+	return 0;
+}
+
+static struct platform_driver ab3100_rtc_driver = {
+	.driver = {
+		.name = "ab3100-rtc",
+		.owner = THIS_MODULE,
+	},
+	.remove	 = __exit_p(ab3100_rtc_remove),
+};
+
+static int __init ab3100_rtc_init(void)
+{
+	return platform_driver_probe(&ab3100_rtc_driver,
+				     ab3100_rtc_probe);
+}
+
+static void __exit ab3100_rtc_exit(void)
+{
+	platform_driver_unregister(&ab3100_rtc_driver);
+}
+
+module_init(ab3100_rtc_init);
+module_exit(ab3100_rtc_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 RTC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c
new file mode 100644
index 00000000000..79795cdf6ed
--- /dev/null
+++ b/drivers/rtc/rtc-wm831x.c
@@ -0,0 +1,523 @@
+/*
+ *	Real Time Clock driver for Wolfson Microelectronics WM831x
+ *
+ *	Copyright (C) 2009 Wolfson Microelectronics PLC.
+ *
+ *  Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+
+/*
+ * R16416 (0x4020) - RTC Write Counter
+ */
+#define WM831X_RTC_WR_CNT_MASK                  0xFFFF  /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_SHIFT                      0  /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_WIDTH                     16  /* RTC_WR_CNT - [15:0] */
+
+/*
+ * R16417 (0x4021) - RTC Time 1
+ */
+#define WM831X_RTC_TIME_MASK                    0xFFFF  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT                        0  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH                       16  /* RTC_TIME - [15:0] */
+
+/*
+ * R16418 (0x4022) - RTC Time 2
+ */
+#define WM831X_RTC_TIME_MASK                    0xFFFF  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT                        0  /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH                       16  /* RTC_TIME - [15:0] */
+
+/*
+ * R16419 (0x4023) - RTC Alarm 1
+ */
+#define WM831X_RTC_ALM_MASK                     0xFFFF  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT                         0  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH                        16  /* RTC_ALM - [15:0] */
+
+/*
+ * R16420 (0x4024) - RTC Alarm 2
+ */
+#define WM831X_RTC_ALM_MASK                     0xFFFF  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT                         0  /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH                        16  /* RTC_ALM - [15:0] */
+
+/*
+ * R16421 (0x4025) - RTC Control
+ */
+#define WM831X_RTC_VALID                        0x8000  /* RTC_VALID */
+#define WM831X_RTC_VALID_MASK                   0x8000  /* RTC_VALID */
+#define WM831X_RTC_VALID_SHIFT                      15  /* RTC_VALID */
+#define WM831X_RTC_VALID_WIDTH                       1  /* RTC_VALID */
+#define WM831X_RTC_SYNC_BUSY                    0x4000  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_MASK               0x4000  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_SHIFT                  14  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_WIDTH                   1  /* RTC_SYNC_BUSY */
+#define WM831X_RTC_ALM_ENA                      0x0400  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_MASK                 0x0400  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_SHIFT                    10  /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_WIDTH                     1  /* RTC_ALM_ENA */
+#define WM831X_RTC_PINT_FREQ_MASK               0x0070  /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_SHIFT                   4  /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_WIDTH                   3  /* RTC_PINT_FREQ - [6:4] */
+
+/*
+ * R16422 (0x4026) - RTC Trim
+ */
+#define WM831X_RTC_TRIM_MASK                    0x03FF  /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_SHIFT                        0  /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_WIDTH                       10  /* RTC_TRIM - [9:0] */
+
+#define WM831X_SET_TIME_RETRIES	5
+#define WM831X_GET_TIME_RETRIES	5
+
+struct wm831x_rtc {
+	struct wm831x *wm831x;
+	struct rtc_device *rtc;
+	unsigned int alarm_enabled:1;
+};
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm831x_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	u16 time1[2], time2[2];
+	int ret;
+	int count = 0;
+
+	/* Has the RTC been programmed? */
+	ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read RTC control: %d\n", ret);
+		return ret;
+	}
+	if (!(ret & WM831X_RTC_VALID)) {
+		dev_dbg(dev, "RTC not yet configured\n");
+		return -EINVAL;
+	}
+
+	/* Read twice to make sure we don't read a corrupt, partially
+	 * incremented, value.
+	 */
+	do {
+		ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+				       2, time1);
+		if (ret != 0)
+			continue;
+
+		ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+				       2, time2);
+		if (ret != 0)
+			continue;
+
+		if (memcmp(time1, time2, sizeof(time1)) == 0) {
+			u32 time = (time1[0] << 16) | time1[1];
+
+			rtc_time_to_tm(time, tm);
+			return rtc_valid_tm(tm);
+		}
+
+	} while (++count < WM831X_GET_TIME_RETRIES);
+
+	dev_err(dev, "Timed out reading current time\n");
+
+	return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm831x_rtc_set_mmss(struct device *dev, unsigned long time)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	struct rtc_time new_tm;
+	unsigned long new_time;
+	int ret;
+	int count = 0;
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_1,
+			       (time >> 16) & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write TIME_1: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_2, time & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write TIME_2: %d\n", ret);
+		return ret;
+	}
+
+	/* Wait for the update to complete - should happen first time
+	 * round but be conservative.
+	 */
+	do {
+		msleep(1);
+
+		ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+		if (ret < 0)
+			ret = WM831X_RTC_SYNC_BUSY;
+	} while (!(ret & WM831X_RTC_SYNC_BUSY) &&
+		 ++count < WM831X_SET_TIME_RETRIES);
+
+	if (ret & WM831X_RTC_SYNC_BUSY) {
+		dev_err(dev, "Timed out writing RTC update\n");
+		return -EIO;
+	}
+
+	/* Check that the update was accepted; security features may
+	 * have caused the update to be ignored.
+	 */
+	ret = wm831x_rtc_readtime(dev, &new_tm);
+	if (ret < 0)
+		return ret;
+
+	ret = rtc_tm_to_time(&new_tm, &new_time);
+	if (ret < 0) {
+		dev_err(dev, "Failed to convert time: %d\n", ret);
+		return ret;
+	}
+
+	/* Allow a second of change in case of tick */
+	if (new_time - time > 1) {
+		dev_err(dev, "RTC update not permitted by hardware\n");
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm831x_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	int ret;
+	u16 data[2];
+	u32 time;
+
+	ret = wm831x_bulk_read(wm831x_rtc->wm831x, WM831X_RTC_ALARM_1,
+			       2, data);
+	if (ret != 0) {
+		dev_err(dev, "Failed to read alarm time: %d\n", ret);
+		return ret;
+	}
+
+	time = (data[0] << 16) | data[1];
+
+	rtc_time_to_tm(time, &alrm->time);
+
+	ret = wm831x_reg_read(wm831x_rtc->wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read RTC control: %d\n", ret);
+		return ret;
+	}
+
+	if (ret & WM831X_RTC_ALM_ENA)
+		alrm->enabled = 1;
+	else
+		alrm->enabled = 0;
+
+	return 0;
+}
+
+static int wm831x_rtc_stop_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+	wm831x_rtc->alarm_enabled = 0;
+
+	return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			       WM831X_RTC_ALM_ENA, 0);
+}
+
+static int wm831x_rtc_start_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+	wm831x_rtc->alarm_enabled = 1;
+
+	return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			       WM831X_RTC_ALM_ENA, WM831X_RTC_ALM_ENA);
+}
+
+static int wm831x_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	struct wm831x *wm831x = wm831x_rtc->wm831x;
+	int ret;
+	unsigned long time;
+
+	ret = rtc_tm_to_time(&alrm->time, &time);
+	if (ret < 0) {
+		dev_err(dev, "Failed to convert time: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_rtc_stop_alarm(wm831x_rtc);
+	if (ret < 0) {
+		dev_err(dev, "Failed to stop alarm: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_1,
+			       (time >> 16) & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write ALARM_1: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_2, time & 0xffff);
+	if (ret < 0) {
+		dev_err(dev, "Failed to write ALARM_2: %d\n", ret);
+		return ret;
+	}
+
+	if (alrm->enabled) {
+		ret = wm831x_rtc_start_alarm(wm831x_rtc);
+		if (ret < 0) {
+			dev_err(dev, "Failed to start alarm: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int wm831x_rtc_alarm_irq_enable(struct device *dev,
+				       unsigned int enabled)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+
+	if (enabled)
+		return wm831x_rtc_start_alarm(wm831x_rtc);
+	else
+		return wm831x_rtc_stop_alarm(wm831x_rtc);
+}
+
+static int wm831x_rtc_update_irq_enable(struct device *dev,
+					unsigned int enabled)
+{
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+	int val;
+
+	if (enabled)
+		val = 1 << WM831X_RTC_PINT_FREQ_SHIFT;
+	else
+		val = 0;
+
+	return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			       WM831X_RTC_PINT_FREQ_MASK, val);
+}
+
+static irqreturn_t wm831x_alm_irq(int irq, void *data)
+{
+	struct wm831x_rtc *wm831x_rtc = data;
+
+	rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_per_irq(int irq, void *data)
+{
+	struct wm831x_rtc *wm831x_rtc = data;
+
+	rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_UF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops wm831x_rtc_ops = {
+	.read_time = wm831x_rtc_readtime,
+	.set_mmss = wm831x_rtc_set_mmss,
+	.read_alarm = wm831x_rtc_readalarm,
+	.set_alarm = wm831x_rtc_setalarm,
+	.alarm_irq_enable = wm831x_rtc_alarm_irq_enable,
+	.update_irq_enable = wm831x_rtc_update_irq_enable,
+};
+
+#ifdef CONFIG_PM
+/* Turn off the alarm if it should not be a wake source. */
+static int wm831x_rtc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret, enable;
+
+	if (wm831x_rtc->alarm_enabled && device_may_wakeup(&pdev->dev))
+		enable = WM831X_RTC_ALM_ENA;
+	else
+		enable = 0;
+
+	ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			      WM831X_RTC_ALM_ENA, enable);
+	if (ret != 0)
+		dev_err(&pdev->dev, "Failed to update RTC alarm: %d\n", ret);
+
+	return 0;
+}
+
+/* Enable the alarm if it should be enabled (in case it was disabled to
+ * prevent use as a wake source).
+ */
+static int wm831x_rtc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (wm831x_rtc->alarm_enabled) {
+		ret = wm831x_rtc_start_alarm(wm831x_rtc);
+		if (ret != 0)
+			dev_err(&pdev->dev,
+				"Failed to restart RTC alarm: %d\n", ret);
+	}
+
+	return 0;
+}
+
+/* Unconditionally disable the alarm */
+static int wm831x_rtc_freeze(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+			      WM831X_RTC_ALM_ENA, 0);
+	if (ret != 0)
+		dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", ret);
+
+	return 0;
+}
+#else
+#define wm831x_rtc_suspend NULL
+#define wm831x_rtc_resume NULL
+#define wm831x_rtc_freeze NULL
+#endif
+
+static int wm831x_rtc_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_rtc *wm831x_rtc;
+	int per_irq = platform_get_irq_byname(pdev, "PER");
+	int alm_irq = platform_get_irq_byname(pdev, "ALM");
+	int ret = 0;
+
+	wm831x_rtc = kzalloc(sizeof(*wm831x_rtc), GFP_KERNEL);
+	if (wm831x_rtc == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wm831x_rtc);
+	wm831x_rtc->wm831x = wm831x;
+
+	ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret);
+		goto err;
+	}
+	if (ret & WM831X_RTC_ALM_ENA)
+		wm831x_rtc->alarm_enabled = 1;
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	wm831x_rtc->rtc = rtc_device_register("wm831x", &pdev->dev,
+					      &wm831x_rtc_ops, THIS_MODULE);
+	if (IS_ERR(wm831x_rtc->rtc)) {
+		ret = PTR_ERR(wm831x_rtc->rtc);
+		goto err;
+	}
+
+	ret = wm831x_request_irq(wm831x, per_irq, wm831x_per_irq,
+				 IRQF_TRIGGER_RISING, "wm831x_rtc_per",
+				 wm831x_rtc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request periodic IRQ %d: %d\n",
+			per_irq, ret);
+	}
+
+	ret = wm831x_request_irq(wm831x, alm_irq, wm831x_alm_irq,
+				 IRQF_TRIGGER_RISING, "wm831x_rtc_alm",
+				 wm831x_rtc);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+			alm_irq, ret);
+	}
+
+	return 0;
+
+err:
+	kfree(wm831x_rtc);
+	return ret;
+}
+
+static int __devexit wm831x_rtc_remove(struct platform_device *pdev)
+{
+	struct wm831x_rtc *wm831x_rtc = platform_get_drvdata(pdev);
+	int per_irq = platform_get_irq_byname(pdev, "PER");
+	int alm_irq = platform_get_irq_byname(pdev, "ALM");
+
+	wm831x_free_irq(wm831x_rtc->wm831x, alm_irq, wm831x_rtc);
+	wm831x_free_irq(wm831x_rtc->wm831x, per_irq, wm831x_rtc);
+	rtc_device_unregister(wm831x_rtc->rtc);
+	kfree(wm831x_rtc);
+
+	return 0;
+}
+
+static struct dev_pm_ops wm831x_rtc_pm_ops = {
+	.suspend = wm831x_rtc_suspend,
+	.resume = wm831x_rtc_resume,
+
+	.freeze = wm831x_rtc_freeze,
+	.thaw = wm831x_rtc_resume,
+	.restore = wm831x_rtc_resume,
+
+	.poweroff = wm831x_rtc_suspend,
+};
+
+static struct platform_driver wm831x_rtc_driver = {
+	.probe = wm831x_rtc_probe,
+	.remove = __devexit_p(wm831x_rtc_remove),
+	.driver = {
+		.name = "wm831x-rtc",
+		.pm = &wm831x_rtc_pm_ops,
+	},
+};
+
+static int __init wm831x_rtc_init(void)
+{
+	return platform_driver_register(&wm831x_rtc_driver);
+}
+module_init(wm831x_rtc_init);
+
+static void __exit wm831x_rtc_exit(void)
+{
+	platform_driver_unregister(&wm831x_rtc_driver);
+}
+module_exit(wm831x_rtc_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM831x series PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-rtc");
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 3fd21d7cb6b..2d02dfd7076 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -223,19 +223,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 
 /* Power bus message definitions */
 
-#define DEV_GRP_NULL		0x0
-#define DEV_GRP_P1		0x1
-#define DEV_GRP_P2		0x2
-#define DEV_GRP_P3		0x4
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus.  See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
 
-#define RES_GRP_RES		0x0
-#define RES_GRP_PP		0x1
-#define RES_GRP_RC		0x2
+/* Processor groups */
+#define DEV_GRP_NULL		0x0
+#define DEV_GRP_P1		0x1	/* P1: all OMAP devices */
+#define DEV_GRP_P2		0x2	/* P2: all Modem devices */
+#define DEV_GRP_P3		0x4	/* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES		0x0	/* Reserved */
+#define RES_GRP_PP		0x1	/* Power providers */
+#define RES_GRP_RC		0x2	/* Reset and control */
 #define RES_GRP_PP_RC		0x3
-#define RES_GRP_PR		0x4
+#define RES_GRP_PR		0x4	/* Power references */
 #define RES_GRP_PP_PR		0x5
 #define RES_GRP_RC_PR		0x6
-#define RES_GRP_ALL		0x7
+#define RES_GRP_ALL		0x7	/* All resource groups */
 
 #define RES_TYPE2_R0		0x0
 
@@ -246,6 +255,41 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 #define RES_STATE_SLEEP		0x8
 #define RES_STATE_OFF		0x0
 
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1               1
+#define RES_VAUX2               2
+#define RES_VAUX3               3
+#define RES_VAUX4               4
+#define RES_VMMC1               5
+#define RES_VMMC2               6
+#define RES_VPLL1               7
+#define RES_VPLL2               8
+#define RES_VSIM                9
+#define RES_VDAC                10
+#define RES_VINTANA1            11
+#define RES_VINTANA2            12
+#define RES_VINTDIG             13
+#define RES_VIO                 14
+#define RES_VDD1                15
+#define RES_VDD2                16
+#define RES_VUSB_1V5            17
+#define RES_VUSB_1V8            18
+#define RES_VUSB_3V1            19
+#define RES_VUSBCP              20
+#define RES_REGEN               21
+/* Reset and control */
+#define RES_NRES_PWRON          22
+#define RES_CLKEN               23
+#define RES_SYSEN               24
+#define RES_HFCLKOUT            25
+#define RES_32KCLKOUT           26
+#define RES_RESET               27
+/* Power Reference */
+#define RES_Main_Ref            28
+
+#define TOTAL_RESOURCES		28
 /*
  * Power Bus Message Format ... these can be sent individually by Linux,
  * but are usually part of downloaded scripts that are run when various
@@ -327,6 +371,36 @@ struct twl4030_usb_data {
 	enum twl4030_usb_mode	usb_mode;
 };
 
+struct twl4030_ins {
+	u16 pmb_message;
+	u8 delay;
+};
+
+struct twl4030_script {
+	struct twl4030_ins *script;
+	unsigned size;
+	u8 flags;
+#define TWL4030_WRST_SCRIPT	(1<<0)
+#define TWL4030_WAKEUP12_SCRIPT	(1<<1)
+#define TWL4030_WAKEUP3_SCRIPT	(1<<2)
+#define TWL4030_SLEEP_SCRIPT	(1<<3)
+};
+
+struct twl4030_resconfig {
+	u8 resource;
+	u8 devgroup;	/* Processor group that Power resource belongs to */
+	u8 type;	/* Power resource addressed, 6 / broadcast message */
+	u8 type2;	/* Power resource addressed, 3 / broadcast message */
+};
+
+struct twl4030_power_data {
+	struct twl4030_script **scripts;
+	unsigned num;
+	struct twl4030_resconfig *resource_config;
+};
+
+extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
+
 struct twl4030_platform_data {
 	unsigned				irq_base, irq_end;
 	struct twl4030_bci_platform_data	*bci;
@@ -334,6 +408,7 @@ struct twl4030_platform_data {
 	struct twl4030_madc_platform_data	*madc;
 	struct twl4030_keypad_data		*keypad;
 	struct twl4030_usb_data			*usb;
+	struct twl4030_power_data		*power;
 
 	/* LDO regulators */
 	struct regulator_init_data		*vdac;
@@ -364,7 +439,6 @@ int twl4030_sih_setup(int module);
 #define TWL4030_VAUX3_DEV_GRP		0x1F
 #define TWL4030_VAUX3_DEDICATED		0x22
 
-
 #if defined(CONFIG_TWL4030_BCI_BATTERY) || \
 	defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
 	extern int twl4030charger_usb_en(int enable);
diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h
index 7a3f316e384..e9aa4c9d749 100644
--- a/include/linux/mfd/ab3100.h
+++ b/include/linux/mfd/ab3100.h
@@ -6,6 +6,8 @@
  */
 
 #include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/regulator/machine.h>
 
 #ifndef MFD_AB3100_H
 #define MFD_AB3100_H
@@ -56,6 +58,14 @@
 #define AB3100_STR_BATT_REMOVAL				(0x40)
 #define AB3100_STR_VBUS					(0x80)
 
+/*
+ * AB3100 contains 8 regulators, one external regulator controller
+ * and a buck converter, further the LDO E and buck converter can
+ * have separate settings if they are in sleep mode, this is
+ * modeled as a separate regulator.
+ */
+#define AB3100_NUM_REGULATORS				10
+
 /**
  * struct ab3100
  * @access_mutex: lock out concurrent accesses to the AB3100 registers
@@ -86,11 +96,30 @@ struct ab3100 {
 	bool startup_events_read;
 };
 
-int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval);
-int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval);
-int ab3100_get_register_page(struct ab3100 *ab3100,
+/**
+ * struct ab3100_platform_data
+ * Data supplied to initialize board connections to the AB3100
+ * @reg_constraints: regulator constraints for target board
+ *     the order of these constraints are: LDO A, C, D, E,
+ *     F, G, H, K, EXT and BUCK.
+ * @reg_initvals: initial values for the regulator registers
+ *     plus two sleep settings for LDO E and the BUCK converter.
+ *     exactly AB3100_NUM_REGULATORS+2 values must be sent in.
+ *     Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK,
+ *     BUCK sleep, LDO D. (LDO D need to be initialized last.)
+ * @external_voltage: voltage level of the external regulator.
+ */
+struct ab3100_platform_data {
+	struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS];
+	u8 reg_initvals[AB3100_NUM_REGULATORS+2];
+	int external_voltage;
+};
+
+int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval);
+int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval);
+int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
 			     u8 first_reg, u8 *regvals, u8 numregs);
-int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
 				 u8 reg, u8 andmask, u8 ormask);
 u8 ab3100_get_chip_type(struct ab3100 *ab3100);
 int ab3100_event_register(struct ab3100 *ab3100,
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 49ef857cdb2..11d740b8831 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -23,6 +23,7 @@
  */
 struct mfd_cell {
 	const char		*name;
+	int			id;
 
 	int			(*enable)(struct platform_device *dev);
 	int			(*disable)(struct platform_device *dev);
diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h
index c12c3c0932b..e5124ceea76 100644
--- a/include/linux/mfd/ezx-pcap.h
+++ b/include/linux/mfd/ezx-pcap.h
@@ -25,9 +25,12 @@ struct pcap_chip;
 
 int ezx_pcap_write(struct pcap_chip *, u8, u32);
 int ezx_pcap_read(struct pcap_chip *, u8, u32 *);
+int ezx_pcap_set_bits(struct pcap_chip *, u8, u32, u32);
 int pcap_to_irq(struct pcap_chip *, int);
+int irq_to_pcap(struct pcap_chip *, int);
 int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *);
 int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
+void pcap_set_ts_bits(struct pcap_chip *, u32);
 
 #define PCAP_SECOND_PORT	1
 #define PCAP_CS_AH		2
@@ -224,7 +227,6 @@ int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
 #define PCAP_LED1		1
 #define PCAP_BL0		2
 #define PCAP_BL1		3
-#define PCAP_VIB		4
 #define PCAP_LED_3MA		0
 #define PCAP_LED_4MA		1
 #define PCAP_LED_5MA		2
@@ -243,9 +245,6 @@ int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
 #define PCAP_LED0_C_SHIFT	15
 #define PCAP_LED1_C_SHIFT	17
 #define PCAP_BL1_SHIFT		20
-#define PCAP_VIB_MASK		0x3
-#define PCAP_VIB_SHIFT		20
-#define PCAP_VIB_EN		(1 << 19)
 
 /* RTC */
 #define PCAP_RTC_DAY_MASK	0x3fff
diff --git a/include/linux/mfd/mc13783-private.h b/include/linux/mfd/mc13783-private.h
new file mode 100644
index 00000000000..47e698cb0f1
--- /dev/null
+++ b/include/linux/mfd/mc13783-private.h
@@ -0,0 +1,396 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_MFD_MC13783_PRIV_H
+#define __LINUX_MFD_MC13783_PRIV_H
+
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+
+struct mc13783_irq {
+	void (*handler)(int, void *);
+	void *data;
+};
+
+#define MC13783_NUM_IRQ		2
+#define MC13783_IRQ_TS		0
+#define MC13783_IRQ_REGULATOR	1
+
+#define MC13783_ADC_MODE_TS		1
+#define MC13783_ADC_MODE_SINGLE_CHAN	2
+#define MC13783_ADC_MODE_MULT_CHAN	3
+
+struct mc13783 {
+	int revision;
+	struct device *dev;
+	struct spi_device *spi_device;
+
+	int (*read_dev)(void *data, char reg, int count, u32 *dst);
+	int (*write_dev)(void *data, char reg, int count, const u32 *src);
+
+	struct mutex io_lock;
+	void *io_data;
+	int irq;
+	unsigned int flags;
+
+	struct mc13783_irq irq_handler[MC13783_NUM_IRQ];
+	struct work_struct work;
+	struct completion adc_done;
+	unsigned int ts_active;
+	struct mutex adc_conv_lock;
+
+	struct mc13783_regulator_init_data *regulators;
+	int num_regulators;
+};
+
+int mc13783_reg_read(struct mc13783 *, int reg_num, u32 *);
+int mc13783_reg_write(struct mc13783 *, int, u32);
+int mc13783_set_bits(struct mc13783 *, int, u32, u32);
+int mc13783_free_irq(struct mc13783 *mc13783, int irq);
+int mc13783_register_irq(struct mc13783 *mc13783, int irq,
+		void (*handler) (int, void *), void *data);
+
+#define MC13783_REG_INTERRUPT_STATUS_0		 0
+#define MC13783_REG_INTERRUPT_MASK_0		 1
+#define MC13783_REG_INTERRUPT_SENSE_0		 2
+#define MC13783_REG_INTERRUPT_STATUS_1		 3
+#define MC13783_REG_INTERRUPT_MASK_1		 4
+#define MC13783_REG_INTERRUPT_SENSE_1		 5
+#define MC13783_REG_POWER_UP_MODE_SENSE		 6
+#define MC13783_REG_REVISION			 7
+#define MC13783_REG_SEMAPHORE			 8
+#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9
+#define MC13783_REG_ARBITRATION_SWITCHERS	10
+#define MC13783_REG_ARBITRATION_REGULATORS_0	11
+#define MC13783_REG_ARBITRATION_REGULATORS_1	12
+#define MC13783_REG_POWER_CONTROL_0		13
+#define MC13783_REG_POWER_CONTROL_1		14
+#define MC13783_REG_POWER_CONTROL_2		15
+#define MC13783_REG_REGEN_ASSIGNMENT		16
+#define MC13783_REG_CONTROL_SPARE		17
+#define MC13783_REG_MEMORY_A			18
+#define MC13783_REG_MEMORY_B			19
+#define MC13783_REG_RTC_TIME			20
+#define MC13783_REG_RTC_ALARM			21
+#define MC13783_REG_RTC_DAY			22
+#define MC13783_REG_RTC_DAY_ALARM		23
+#define MC13783_REG_SWITCHERS_0			24
+#define MC13783_REG_SWITCHERS_1			25
+#define MC13783_REG_SWITCHERS_2			26
+#define MC13783_REG_SWITCHERS_3			27
+#define MC13783_REG_SWITCHERS_4			28
+#define MC13783_REG_SWITCHERS_5			29
+#define MC13783_REG_REGULATOR_SETTING_0		30
+#define MC13783_REG_REGULATOR_SETTING_1		31
+#define MC13783_REG_REGULATOR_MODE_0		32
+#define MC13783_REG_REGULATOR_MODE_1		33
+#define MC13783_REG_POWER_MISCELLANEOUS		34
+#define MC13783_REG_POWER_SPARE			35
+#define MC13783_REG_AUDIO_RX_0			36
+#define MC13783_REG_AUDIO_RX_1			37
+#define MC13783_REG_AUDIO_TX			38
+#define MC13783_REG_AUDIO_SSI_NETWORK		39
+#define MC13783_REG_AUDIO_CODEC			40
+#define MC13783_REG_AUDIO_STEREO_DAC		41
+#define MC13783_REG_AUDIO_SPARE			42
+#define MC13783_REG_ADC_0			43
+#define MC13783_REG_ADC_1			44
+#define MC13783_REG_ADC_2			45
+#define MC13783_REG_ADC_3			46
+#define MC13783_REG_ADC_4			47
+#define MC13783_REG_CHARGER			48
+#define MC13783_REG_USB				49
+#define MC13783_REG_CHARGE_USB_SPARE		50
+#define MC13783_REG_LED_CONTROL_0		51
+#define MC13783_REG_LED_CONTROL_1		52
+#define MC13783_REG_LED_CONTROL_2		53
+#define MC13783_REG_LED_CONTROL_3		54
+#define MC13783_REG_LED_CONTROL_4		55
+#define MC13783_REG_LED_CONTROL_5		56
+#define MC13783_REG_SPARE			57
+#define MC13783_REG_TRIM_0			58
+#define MC13783_REG_TRIM_1			59
+#define MC13783_REG_TEST_0			60
+#define MC13783_REG_TEST_1			61
+#define MC13783_REG_TEST_2			62
+#define MC13783_REG_TEST_3			63
+#define MC13783_REG_NB				64
+
+
+/*
+ * Interrupt Status
+ */
+#define MC13783_INT_STAT_ADCDONEI	(1 << 0)
+#define MC13783_INT_STAT_ADCBISDONEI	(1 << 1)
+#define MC13783_INT_STAT_TSI		(1 << 2)
+#define MC13783_INT_STAT_WHIGHI		(1 << 3)
+#define MC13783_INT_STAT_WLOWI		(1 << 4)
+#define MC13783_INT_STAT_CHGDETI	(1 << 6)
+#define MC13783_INT_STAT_CHGOVI		(1 << 7)
+#define MC13783_INT_STAT_CHGREVI	(1 << 8)
+#define MC13783_INT_STAT_CHGSHORTI	(1 << 9)
+#define MC13783_INT_STAT_CCCVI		(1 << 10)
+#define MC13783_INT_STAT_CHGCURRI	(1 << 11)
+#define MC13783_INT_STAT_BPONI		(1 << 12)
+#define MC13783_INT_STAT_LOBATLI	(1 << 13)
+#define MC13783_INT_STAT_LOBATHI	(1 << 14)
+#define MC13783_INT_STAT_UDPI		(1 << 15)
+#define MC13783_INT_STAT_USBI		(1 << 16)
+#define MC13783_INT_STAT_IDI		(1 << 19)
+#define MC13783_INT_STAT_Unused		(1 << 20)
+#define MC13783_INT_STAT_SE1I		(1 << 21)
+#define MC13783_INT_STAT_CKDETI		(1 << 22)
+#define MC13783_INT_STAT_UDMI		(1 << 23)
+
+/*
+ * Interrupt Mask
+ */
+#define MC13783_INT_MASK_ADCDONEM	(1 << 0)
+#define MC13783_INT_MASK_ADCBISDONEM	(1 << 1)
+#define MC13783_INT_MASK_TSM		(1 << 2)
+#define MC13783_INT_MASK_WHIGHM		(1 << 3)
+#define MC13783_INT_MASK_WLOWM		(1 << 4)
+#define MC13783_INT_MASK_CHGDETM	(1 << 6)
+#define MC13783_INT_MASK_CHGOVM		(1 << 7)
+#define MC13783_INT_MASK_CHGREVM	(1 << 8)
+#define MC13783_INT_MASK_CHGSHORTM	(1 << 9)
+#define MC13783_INT_MASK_CCCVM		(1 << 10)
+#define MC13783_INT_MASK_CHGCURRM	(1 << 11)
+#define MC13783_INT_MASK_BPONM		(1 << 12)
+#define MC13783_INT_MASK_LOBATLM	(1 << 13)
+#define MC13783_INT_MASK_LOBATHM	(1 << 14)
+#define MC13783_INT_MASK_UDPM		(1 << 15)
+#define MC13783_INT_MASK_USBM		(1 << 16)
+#define MC13783_INT_MASK_IDM		(1 << 19)
+#define MC13783_INT_MASK_SE1M		(1 << 21)
+#define MC13783_INT_MASK_CKDETM		(1 << 22)
+
+/*
+ * Reg Regulator Mode 0
+ */
+#define MC13783_REGCTRL_VAUDIO_EN	(1 << 0)
+#define MC13783_REGCTRL_VAUDIO_STBY	(1 << 1)
+#define MC13783_REGCTRL_VAUDIO_MODE	(1 << 2)
+#define MC13783_REGCTRL_VIOHI_EN	(1 << 3)
+#define MC13783_REGCTRL_VIOHI_STBY	(1 << 4)
+#define MC13783_REGCTRL_VIOHI_MODE	(1 << 5)
+#define MC13783_REGCTRL_VIOLO_EN	(1 << 6)
+#define MC13783_REGCTRL_VIOLO_STBY 	(1 << 7)
+#define MC13783_REGCTRL_VIOLO_MODE	(1 << 8)
+#define MC13783_REGCTRL_VDIG_EN		(1 << 9)
+#define MC13783_REGCTRL_VDIG_STBY	(1 << 10)
+#define MC13783_REGCTRL_VDIG_MODE	(1 << 11)
+#define MC13783_REGCTRL_VGEN_EN		(1 << 12)
+#define MC13783_REGCTRL_VGEN_STBY	(1 << 13)
+#define MC13783_REGCTRL_VGEN_MODE	(1 << 14)
+#define MC13783_REGCTRL_VRFDIG_EN	(1 << 15)
+#define MC13783_REGCTRL_VRFDIG_STBY	(1 << 16)
+#define MC13783_REGCTRL_VRFDIG_MODE	(1 << 17)
+#define MC13783_REGCTRL_VRFREF_EN	(1 << 18)
+#define MC13783_REGCTRL_VRFREF_STBY	(1 << 19)
+#define MC13783_REGCTRL_VRFREF_MODE	(1 << 20)
+#define MC13783_REGCTRL_VRFCP_EN	(1 << 21)
+#define MC13783_REGCTRL_VRFCP_STBY	(1 << 22)
+#define MC13783_REGCTRL_VRFCP_MODE	(1 << 23)
+
+/*
+ * Reg Regulator Mode 1
+ */
+#define MC13783_REGCTRL_VSIM_EN		(1 << 0)
+#define MC13783_REGCTRL_VSIM_STBY	(1 << 1)
+#define MC13783_REGCTRL_VSIM_MODE	(1 << 2)
+#define MC13783_REGCTRL_VESIM_EN	(1 << 3)
+#define MC13783_REGCTRL_VESIM_STBY	(1 << 4)
+#define MC13783_REGCTRL_VESIM_MODE	(1 << 5)
+#define MC13783_REGCTRL_VCAM_EN		(1 << 6)
+#define MC13783_REGCTRL_VCAM_STBY	(1 << 7)
+#define MC13783_REGCTRL_VCAM_MODE	(1 << 8)
+#define	MC13783_REGCTRL_VRFBG_EN	(1 << 9)
+#define MC13783_REGCTRL_VRFBG_STBY	(1 << 10)
+#define MC13783_REGCTRL_VVIB_EN		(1 << 11)
+#define MC13783_REGCTRL_VRF1_EN		(1 << 12)
+#define MC13783_REGCTRL_VRF1_STBY	(1 << 13)
+#define MC13783_REGCTRL_VRF1_MODE	(1 << 14)
+#define MC13783_REGCTRL_VRF2_EN		(1 << 15)
+#define MC13783_REGCTRL_VRF2_STBY	(1 << 16)
+#define MC13783_REGCTRL_VRF2_MODE	(1 << 17)
+#define MC13783_REGCTRL_VMMC1_EN	(1 << 18)
+#define MC13783_REGCTRL_VMMC1_STBY	(1 << 19)
+#define MC13783_REGCTRL_VMMC1_MODE	(1 << 20)
+#define MC13783_REGCTRL_VMMC2_EN	(1 << 21)
+#define MC13783_REGCTRL_VMMC2_STBY	(1 << 22)
+#define MC13783_REGCTRL_VMMC2_MODE	(1 << 23)
+
+/*
+ * Reg Regulator Misc.
+ */
+#define MC13783_REGCTRL_GPO1_EN		(1 << 6)
+#define MC13783_REGCTRL_GPO2_EN		(1 << 8)
+#define MC13783_REGCTRL_GPO3_EN		(1 << 10)
+#define MC13783_REGCTRL_GPO4_EN		(1 << 12)
+#define MC13783_REGCTRL_VIBPINCTRL	(1 << 14)
+
+/*
+ * Reg Switcher 4
+ */
+#define MC13783_SWCTRL_SW1A_MODE	(1 << 0)
+#define MC13783_SWCTRL_SW1A_STBY_MODE	(1 << 2)
+#define MC13783_SWCTRL_SW1A_DVS_SPEED	(1 << 6)
+#define MC13783_SWCTRL_SW1A_PANIC_MODE	(1 << 8)
+#define MC13783_SWCTRL_SW1A_SOFTSTART	(1 << 9)
+#define MC13783_SWCTRL_SW1B_MODE	(1 << 10)
+#define MC13783_SWCTRL_SW1B_STBY_MODE	(1 << 12)
+#define MC13783_SWCTRL_SW1B_DVS_SPEED	(1 << 14)
+#define MC13783_SWCTRL_SW1B_PANIC_MODE	(1 << 16)
+#define MC13783_SWCTRL_SW1B_SOFTSTART	(1 << 17)
+#define MC13783_SWCTRL_PLL_EN		(1 << 18)
+#define MC13783_SWCTRL_PLL_FACTOR	(1 << 19)
+
+/*
+ * Reg Switcher 5
+ */
+#define MC13783_SWCTRL_SW2A_MODE	(1 << 0)
+#define MC13783_SWCTRL_SW2A_STBY_MODE	(1 << 2)
+#define MC13783_SWCTRL_SW2A_DVS_SPEED	(1 << 6)
+#define MC13783_SWCTRL_SW2A_PANIC_MODE	(1 << 8)
+#define MC13783_SWCTRL_SW2A_SOFTSTART	(1 << 9)
+#define MC13783_SWCTRL_SW2B_MODE	(1 << 10)
+#define MC13783_SWCTRL_SW2B_STBY_MODE	(1 << 12)
+#define MC13783_SWCTRL_SW2B_DVS_SPEED	(1 << 14)
+#define MC13783_SWCTRL_SW2B_PANIC_MODE	(1 << 16)
+#define MC13783_SWCTRL_SW2B_SOFTSTART	(1 << 17)
+#define MC13783_SWSET_SW3		(1 << 18)
+#define MC13783_SWCTRL_SW3_EN		(1 << 20)
+#define MC13783_SWCTRL_SW3_STBY		(1 << 21)
+#define MC13783_SWCTRL_SW3_MODE		(1 << 22)
+
+/*
+ * ADC/Touch
+ */
+#define MC13783_ADC0_LICELLCON		(1 << 0)
+#define MC13783_ADC0_CHRGICON		(1 << 1)
+#define MC13783_ADC0_BATICON		(1 << 2)
+#define MC13783_ADC0_RTHEN 		(1 << 3)
+#define MC13783_ADC0_DTHEN		(1 << 4)
+#define MC13783_ADC0_UIDEN		(1 << 5)
+#define MC13783_ADC0_ADOUTEN 		(1 << 6)
+#define MC13783_ADC0_ADOUTPER		(1 << 7)
+#define MC13783_ADC0_ADREFEN		(1 << 10)
+#define MC13783_ADC0_ADREFMODE		(1 << 11)
+#define MC13783_ADC0_TSMOD0		(1 << 12)
+#define MC13783_ADC0_TSMOD1		(1 << 13)
+#define MC13783_ADC0_TSMOD2		(1 << 14)
+#define MC13783_ADC0_CHRGRAWDIV		(1 << 15)
+#define MC13783_ADC0_ADINC1		(1 << 16)
+#define MC13783_ADC0_ADINC2		(1 << 17)
+#define MC13783_ADC0_WCOMP		(1 << 18)
+#define MC13783_ADC0_ADCBIS0		(1 << 23)
+
+#define MC13783_ADC1_ADEN		(1 << 0)
+#define MC13783_ADC1_RAND		(1 << 1)
+#define MC13783_ADC1_ADSEL		(1 << 3)
+#define MC13783_ADC1_TRIGMASK		(1 << 4)
+#define MC13783_ADC1_ADA10		(1 << 5)
+#define MC13783_ADC1_ADA11		(1 << 6)
+#define MC13783_ADC1_ADA12		(1 << 7)
+#define MC13783_ADC1_ADA20		(1 << 8)
+#define MC13783_ADC1_ADA21		(1 << 9)
+#define MC13783_ADC1_ADA22		(1 << 10)
+#define MC13783_ADC1_ATO0		(1 << 11)
+#define MC13783_ADC1_ATO1		(1 << 12)
+#define MC13783_ADC1_ATO2		(1 << 13)
+#define MC13783_ADC1_ATO3		(1 << 14)
+#define MC13783_ADC1_ATO4		(1 << 15)
+#define MC13783_ADC1_ATO5		(1 << 16)
+#define MC13783_ADC1_ATO6		(1 << 17)
+#define MC13783_ADC1_ATO7		(1 << 18)
+#define MC13783_ADC1_ATOX		(1 << 19)
+#define MC13783_ADC1_ASC		(1 << 20)
+#define MC13783_ADC1_ADTRIGIGN		(1 << 21)
+#define MC13783_ADC1_ADONESHOT		(1 << 22)
+#define MC13783_ADC1_ADCBIS1		(1 << 23)
+
+#define MC13783_ADC1_CHAN0_SHIFT	5
+#define MC13783_ADC1_CHAN1_SHIFT	8
+
+#define MC13783_ADC2_ADD10		(1 << 2)
+#define MC13783_ADC2_ADD11		(1 << 3)
+#define MC13783_ADC2_ADD12		(1 << 4)
+#define MC13783_ADC2_ADD13		(1 << 5)
+#define MC13783_ADC2_ADD14		(1 << 6)
+#define MC13783_ADC2_ADD15		(1 << 7)
+#define MC13783_ADC2_ADD16		(1 << 8)
+#define MC13783_ADC2_ADD17		(1 << 9)
+#define MC13783_ADC2_ADD18		(1 << 10)
+#define MC13783_ADC2_ADD19		(1 << 11)
+#define MC13783_ADC2_ADD20		(1 << 14)
+#define MC13783_ADC2_ADD21		(1 << 15)
+#define MC13783_ADC2_ADD22		(1 << 16)
+#define MC13783_ADC2_ADD23		(1 << 17)
+#define MC13783_ADC2_ADD24		(1 << 18)
+#define MC13783_ADC2_ADD25		(1 << 19)
+#define MC13783_ADC2_ADD26		(1 << 20)
+#define MC13783_ADC2_ADD27		(1 << 21)
+#define MC13783_ADC2_ADD28		(1 << 22)
+#define MC13783_ADC2_ADD29		(1 << 23)
+
+#define MC13783_ADC3_WHIGH0		(1 << 0)
+#define MC13783_ADC3_WHIGH1		(1 << 1)
+#define MC13783_ADC3_WHIGH2		(1 << 2)
+#define MC13783_ADC3_WHIGH3		(1 << 3)
+#define MC13783_ADC3_WHIGH4		(1 << 4)
+#define MC13783_ADC3_WHIGH5		(1 << 5)
+#define MC13783_ADC3_ICID0		(1 << 6)
+#define MC13783_ADC3_ICID1		(1 << 7)
+#define MC13783_ADC3_ICID2		(1 << 8)
+#define MC13783_ADC3_WLOW0		(1 << 9)
+#define MC13783_ADC3_WLOW1		(1 << 10)
+#define MC13783_ADC3_WLOW2		(1 << 11)
+#define MC13783_ADC3_WLOW3		(1 << 12)
+#define MC13783_ADC3_WLOW4		(1 << 13)
+#define MC13783_ADC3_WLOW5		(1 << 14)
+#define MC13783_ADC3_ADCBIS2		(1 << 23)
+
+#define MC13783_ADC4_ADDBIS10		(1 << 2)
+#define MC13783_ADC4_ADDBIS11		(1 << 3)
+#define MC13783_ADC4_ADDBIS12		(1 << 4)
+#define MC13783_ADC4_ADDBIS13		(1 << 5)
+#define MC13783_ADC4_ADDBIS14		(1 << 6)
+#define MC13783_ADC4_ADDBIS15		(1 << 7)
+#define MC13783_ADC4_ADDBIS16		(1 << 8)
+#define MC13783_ADC4_ADDBIS17		(1 << 9)
+#define MC13783_ADC4_ADDBIS18		(1 << 10)
+#define MC13783_ADC4_ADDBIS19		(1 << 11)
+#define MC13783_ADC4_ADDBIS20		(1 << 14)
+#define MC13783_ADC4_ADDBIS21		(1 << 15)
+#define MC13783_ADC4_ADDBIS22		(1 << 16)
+#define MC13783_ADC4_ADDBIS23		(1 << 17)
+#define MC13783_ADC4_ADDBIS24		(1 << 18)
+#define MC13783_ADC4_ADDBIS25		(1 << 19)
+#define MC13783_ADC4_ADDBIS26		(1 << 20)
+#define MC13783_ADC4_ADDBIS27		(1 << 21)
+#define MC13783_ADC4_ADDBIS28		(1 << 22)
+#define MC13783_ADC4_ADDBIS29		(1 << 23)
+
+#endif /* __LINUX_MFD_MC13783_PRIV_H */
+
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
new file mode 100644
index 00000000000..b3a2a724357
--- /dev/null
+++ b/include/linux/mfd/mc13783.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __INCLUDE_LINUX_MFD_MC13783_H
+#define __INCLUDE_LINUX_MFD_MC13783_H
+
+struct mc13783;
+struct regulator_init_data;
+
+struct mc13783_regulator_init_data {
+	int id;
+	struct regulator_init_data *init_data;
+};
+
+struct mc13783_platform_data {
+	struct mc13783_regulator_init_data *regulators;
+	int num_regulators;
+	unsigned int flags;
+};
+
+/* mc13783_platform_data flags */
+#define MC13783_USE_TOUCHSCREEN (1 << 0)
+#define MC13783_USE_CODEC	(1 << 1)
+#define MC13783_USE_ADC		(1 << 2)
+#define MC13783_USE_RTC		(1 << 3)
+#define MC13783_USE_REGULATOR	(1 << 4)
+
+int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
+		unsigned int channel, unsigned int *sample);
+
+void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status);
+
+#define	MC13783_SW_SW1A		0
+#define	MC13783_SW_SW1B		1
+#define	MC13783_SW_SW2A		2
+#define	MC13783_SW_SW2B		3
+#define	MC13783_SW_SW3		4
+#define	MC13783_SW_PLL		5
+#define	MC13783_REGU_VAUDIO	6
+#define	MC13783_REGU_VIOHI	7
+#define	MC13783_REGU_VIOLO	8
+#define	MC13783_REGU_VDIG	9
+#define	MC13783_REGU_VGEN	10
+#define	MC13783_REGU_VRFDIG	11
+#define	MC13783_REGU_VRFREF	12
+#define	MC13783_REGU_VRFCP	13
+#define	MC13783_REGU_VSIM	14
+#define	MC13783_REGU_VESIM	15
+#define	MC13783_REGU_VCAM	16
+#define	MC13783_REGU_VRFBG	17
+#define	MC13783_REGU_VVIB	18
+#define	MC13783_REGU_VRF1	19
+#define	MC13783_REGU_VRF2	20
+#define	MC13783_REGU_VMMC1	21
+#define	MC13783_REGU_VMMC2	22
+#define	MC13783_REGU_GPO1	23
+#define	MC13783_REGU_GPO2	24
+#define	MC13783_REGU_GPO3	25
+#define	MC13783_REGU_GPO4	26
+#define	MC13783_REGU_V1		27
+#define	MC13783_REGU_V2		28
+#define	MC13783_REGU_V3		29
+#define	MC13783_REGU_V4		30
+
+#endif /* __INCLUDE_LINUX_MFD_MC13783_H */
+
diff --git a/include/linux/mfd/pcf50633/adc.h b/include/linux/mfd/pcf50633/adc.h
index 56669b4183a..b35e62801ff 100644
--- a/include/linux/mfd/pcf50633/adc.h
+++ b/include/linux/mfd/pcf50633/adc.h
@@ -25,7 +25,8 @@
 #define PCF50633_REG_ADCS3		0x57
 
 #define PCF50633_ADCC1_ADCSTART		0x01
-#define PCF50633_ADCC1_RES_10BIT	0x02
+#define PCF50633_ADCC1_RES_8BIT		0x02
+#define PCF50633_ADCC1_RES_10BIT	0x00
 #define PCF50633_ADCC1_AVERAGE_NO	0x00
 #define PCF50633_ADCC1_AVERAGE_4	0x04
 #define PCF50633_ADCC1_AVERAGE_8	0x08
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index c8f51c3c0a7..9aba7b779fb 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -136,6 +136,7 @@ struct pcf50633 {
 	int irq;
 	struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
 	struct work_struct irq_work;
+	struct workqueue_struct *work_queue;
 	struct mutex lock;
 
 	u8 mask_regs[5];
diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h
new file mode 100644
index 00000000000..b132067e9e9
--- /dev/null
+++ b/include/linux/mfd/wm831x/auxadc.h
@@ -0,0 +1,216 @@
+/*
+ * include/linux/mfd/wm831x/auxadc.h -- Auxiliary ADC interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_AUXADC_H__
+#define __MFD_WM831X_AUXADC_H__
+
+/*
+ * R16429 (0x402D) - AuxADC Data
+ */
+#define WM831X_AUX_DATA_SRC_MASK                0xF000  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_SRC_SHIFT                   12  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_SRC_WIDTH                    4  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_MASK                    0x0FFF  /* AUX_DATA - [11:0] */
+#define WM831X_AUX_DATA_SHIFT                        0  /* AUX_DATA - [11:0] */
+#define WM831X_AUX_DATA_WIDTH                       12  /* AUX_DATA - [11:0] */
+
+/*
+ * R16430 (0x402E) - AuxADC Control
+ */
+#define WM831X_AUX_ENA                          0x8000  /* AUX_ENA */
+#define WM831X_AUX_ENA_MASK                     0x8000  /* AUX_ENA */
+#define WM831X_AUX_ENA_SHIFT                        15  /* AUX_ENA */
+#define WM831X_AUX_ENA_WIDTH                         1  /* AUX_ENA */
+#define WM831X_AUX_CVT_ENA                      0x4000  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_MASK                 0x4000  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_SHIFT                    14  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_WIDTH                     1  /* AUX_CVT_ENA */
+#define WM831X_AUX_SLPENA                       0x1000  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_MASK                  0x1000  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_SHIFT                     12  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_WIDTH                      1  /* AUX_SLPENA */
+#define WM831X_AUX_FRC_ENA                      0x0800  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_MASK                 0x0800  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_SHIFT                    11  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_WIDTH                     1  /* AUX_FRC_ENA */
+#define WM831X_AUX_RATE_MASK                    0x003F  /* AUX_RATE - [5:0] */
+#define WM831X_AUX_RATE_SHIFT                        0  /* AUX_RATE - [5:0] */
+#define WM831X_AUX_RATE_WIDTH                        6  /* AUX_RATE - [5:0] */
+
+/*
+ * R16431 (0x402F) - AuxADC Source
+ */
+#define WM831X_AUX_CAL_SEL                      0x8000  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_MASK                 0x8000  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_SHIFT                    15  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_WIDTH                     1  /* AUX_CAL_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL                0x0400  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_MASK           0x0400  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_SHIFT              10  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_WIDTH               1  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_WALL_SEL                     0x0200  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_MASK                0x0200  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_SHIFT                    9  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_WIDTH                    1  /* AUX_WALL_SEL */
+#define WM831X_AUX_BATT_SEL                     0x0100  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_MASK                0x0100  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_SHIFT                    8  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_WIDTH                    1  /* AUX_BATT_SEL */
+#define WM831X_AUX_USB_SEL                      0x0080  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_MASK                 0x0080  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_SHIFT                     7  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_WIDTH                     1  /* AUX_USB_SEL */
+#define WM831X_AUX_SYSVDD_SEL                   0x0040  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_MASK              0x0040  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_SHIFT                  6  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_WIDTH                  1  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL                0x0020  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_MASK           0x0020  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_SHIFT               5  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_WIDTH               1  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL                0x0010  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_MASK           0x0010  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_SHIFT               4  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_WIDTH               1  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_AUX4_SEL                     0x0008  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_MASK                0x0008  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_SHIFT                    3  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_WIDTH                    1  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX3_SEL                     0x0004  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_MASK                0x0004  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_SHIFT                    2  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_WIDTH                    1  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX2_SEL                     0x0002  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_MASK                0x0002  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_SHIFT                    1  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_WIDTH                    1  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX1_SEL                     0x0001  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_MASK                0x0001  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_SHIFT                    0  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_WIDTH                    1  /* AUX_AUX1_SEL */
+
+/*
+ * R16432 (0x4030) - Comparator Control
+ */
+#define WM831X_DCOMP4_STS                       0x0800  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_MASK                  0x0800  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_SHIFT                     11  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_WIDTH                      1  /* DCOMP4_STS */
+#define WM831X_DCOMP3_STS                       0x0400  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_MASK                  0x0400  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_SHIFT                     10  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_WIDTH                      1  /* DCOMP3_STS */
+#define WM831X_DCOMP2_STS                       0x0200  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_MASK                  0x0200  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_SHIFT                      9  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_WIDTH                      1  /* DCOMP2_STS */
+#define WM831X_DCOMP1_STS                       0x0100  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_MASK                  0x0100  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_SHIFT                      8  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_WIDTH                      1  /* DCOMP1_STS */
+#define WM831X_DCMP4_ENA                        0x0008  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_MASK                   0x0008  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_SHIFT                       3  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_WIDTH                       1  /* DCMP4_ENA */
+#define WM831X_DCMP3_ENA                        0x0004  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_MASK                   0x0004  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_SHIFT                       2  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_WIDTH                       1  /* DCMP3_ENA */
+#define WM831X_DCMP2_ENA                        0x0002  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_MASK                   0x0002  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_SHIFT                       1  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_WIDTH                       1  /* DCMP2_ENA */
+#define WM831X_DCMP1_ENA                        0x0001  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_MASK                   0x0001  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_SHIFT                       0  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_WIDTH                       1  /* DCMP1_ENA */
+
+/*
+ * R16433 (0x4031) - Comparator 1
+ */
+#define WM831X_DCMP1_SRC_MASK                   0xE000  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_SRC_SHIFT                      13  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_SRC_WIDTH                       3  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_GT                         0x1000  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_MASK                    0x1000  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_SHIFT                       12  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_WIDTH                        1  /* DCMP1_GT */
+#define WM831X_DCMP1_THR_MASK                   0x0FFF  /* DCMP1_THR - [11:0] */
+#define WM831X_DCMP1_THR_SHIFT                       0  /* DCMP1_THR - [11:0] */
+#define WM831X_DCMP1_THR_WIDTH                      12  /* DCMP1_THR - [11:0] */
+
+/*
+ * R16434 (0x4032) - Comparator 2
+ */
+#define WM831X_DCMP2_SRC_MASK                   0xE000  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_SRC_SHIFT                      13  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_SRC_WIDTH                       3  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_GT                         0x1000  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_MASK                    0x1000  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_SHIFT                       12  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_WIDTH                        1  /* DCMP2_GT */
+#define WM831X_DCMP2_THR_MASK                   0x0FFF  /* DCMP2_THR - [11:0] */
+#define WM831X_DCMP2_THR_SHIFT                       0  /* DCMP2_THR - [11:0] */
+#define WM831X_DCMP2_THR_WIDTH                      12  /* DCMP2_THR - [11:0] */
+
+/*
+ * R16435 (0x4033) - Comparator 3
+ */
+#define WM831X_DCMP3_SRC_MASK                   0xE000  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_SRC_SHIFT                      13  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_SRC_WIDTH                       3  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_GT                         0x1000  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_MASK                    0x1000  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_SHIFT                       12  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_WIDTH                        1  /* DCMP3_GT */
+#define WM831X_DCMP3_THR_MASK                   0x0FFF  /* DCMP3_THR - [11:0] */
+#define WM831X_DCMP3_THR_SHIFT                       0  /* DCMP3_THR - [11:0] */
+#define WM831X_DCMP3_THR_WIDTH                      12  /* DCMP3_THR - [11:0] */
+
+/*
+ * R16436 (0x4034) - Comparator 4
+ */
+#define WM831X_DCMP4_SRC_MASK                   0xE000  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_SRC_SHIFT                      13  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_SRC_WIDTH                       3  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_GT                         0x1000  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_MASK                    0x1000  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_SHIFT                       12  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_WIDTH                        1  /* DCMP4_GT */
+#define WM831X_DCMP4_THR_MASK                   0x0FFF  /* DCMP4_THR - [11:0] */
+#define WM831X_DCMP4_THR_SHIFT                       0  /* DCMP4_THR - [11:0] */
+#define WM831X_DCMP4_THR_WIDTH                      12  /* DCMP4_THR - [11:0] */
+
+#define WM831X_AUX_CAL_FACTOR  0xfff
+#define WM831X_AUX_CAL_NOMINAL 0x222
+
+enum wm831x_auxadc {
+	WM831X_AUX_CAL = 15,
+	WM831X_AUX_BKUP_BATT = 10,
+	WM831X_AUX_WALL = 9,
+	WM831X_AUX_BATT = 8,
+	WM831X_AUX_USB = 7,
+	WM831X_AUX_SYSVDD = 6,
+	WM831X_AUX_BATT_TEMP = 5,
+	WM831X_AUX_CHIP_TEMP = 4,
+	WM831X_AUX_AUX4 = 3,
+	WM831X_AUX_AUX3 = 2,
+	WM831X_AUX_AUX2 = 1,
+	WM831X_AUX_AUX1 = 0,
+};
+
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input);
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input);
+
+#endif
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
new file mode 100644
index 00000000000..91eb493bf14
--- /dev/null
+++ b/include/linux/mfd/wm831x/core.h
@@ -0,0 +1,289 @@
+/*
+ * include/linux/mfd/wm831x/core.h -- Core interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_CORE_H__
+#define __MFD_WM831X_CORE_H__
+
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+
+/*
+ * Register values.
+ */
+#define WM831X_RESET_ID                         0x00
+#define WM831X_REVISION                         0x01
+#define WM831X_PARENT_ID                        0x4000
+#define WM831X_SYSVDD_CONTROL                   0x4001
+#define WM831X_THERMAL_MONITORING               0x4002
+#define WM831X_POWER_STATE                      0x4003
+#define WM831X_WATCHDOG                         0x4004
+#define WM831X_ON_PIN_CONTROL                   0x4005
+#define WM831X_RESET_CONTROL                    0x4006
+#define WM831X_CONTROL_INTERFACE                0x4007
+#define WM831X_SECURITY_KEY                     0x4008
+#define WM831X_SOFTWARE_SCRATCH                 0x4009
+#define WM831X_OTP_CONTROL                      0x400A
+#define WM831X_GPIO_LEVEL                       0x400C
+#define WM831X_SYSTEM_STATUS                    0x400D
+#define WM831X_ON_SOURCE                        0x400E
+#define WM831X_OFF_SOURCE                       0x400F
+#define WM831X_SYSTEM_INTERRUPTS                0x4010
+#define WM831X_INTERRUPT_STATUS_1               0x4011
+#define WM831X_INTERRUPT_STATUS_2               0x4012
+#define WM831X_INTERRUPT_STATUS_3               0x4013
+#define WM831X_INTERRUPT_STATUS_4               0x4014
+#define WM831X_INTERRUPT_STATUS_5               0x4015
+#define WM831X_IRQ_CONFIG                       0x4017
+#define WM831X_SYSTEM_INTERRUPTS_MASK           0x4018
+#define WM831X_INTERRUPT_STATUS_1_MASK          0x4019
+#define WM831X_INTERRUPT_STATUS_2_MASK          0x401A
+#define WM831X_INTERRUPT_STATUS_3_MASK          0x401B
+#define WM831X_INTERRUPT_STATUS_4_MASK          0x401C
+#define WM831X_INTERRUPT_STATUS_5_MASK          0x401D
+#define WM831X_RTC_WRITE_COUNTER                0x4020
+#define WM831X_RTC_TIME_1                       0x4021
+#define WM831X_RTC_TIME_2                       0x4022
+#define WM831X_RTC_ALARM_1                      0x4023
+#define WM831X_RTC_ALARM_2                      0x4024
+#define WM831X_RTC_CONTROL                      0x4025
+#define WM831X_RTC_TRIM                         0x4026
+#define WM831X_TOUCH_CONTROL_1                  0x4028
+#define WM831X_TOUCH_CONTROL_2                  0x4029
+#define WM831X_TOUCH_DATA_X                     0x402A
+#define WM831X_TOUCH_DATA_Y                     0x402B
+#define WM831X_TOUCH_DATA_Z                     0x402C
+#define WM831X_AUXADC_DATA                      0x402D
+#define WM831X_AUXADC_CONTROL                   0x402E
+#define WM831X_AUXADC_SOURCE                    0x402F
+#define WM831X_COMPARATOR_CONTROL               0x4030
+#define WM831X_COMPARATOR_1                     0x4031
+#define WM831X_COMPARATOR_2                     0x4032
+#define WM831X_COMPARATOR_3                     0x4033
+#define WM831X_COMPARATOR_4                     0x4034
+#define WM831X_GPIO1_CONTROL                    0x4038
+#define WM831X_GPIO2_CONTROL                    0x4039
+#define WM831X_GPIO3_CONTROL                    0x403A
+#define WM831X_GPIO4_CONTROL                    0x403B
+#define WM831X_GPIO5_CONTROL                    0x403C
+#define WM831X_GPIO6_CONTROL                    0x403D
+#define WM831X_GPIO7_CONTROL                    0x403E
+#define WM831X_GPIO8_CONTROL                    0x403F
+#define WM831X_GPIO9_CONTROL                    0x4040
+#define WM831X_GPIO10_CONTROL                   0x4041
+#define WM831X_GPIO11_CONTROL                   0x4042
+#define WM831X_GPIO12_CONTROL                   0x4043
+#define WM831X_GPIO13_CONTROL                   0x4044
+#define WM831X_GPIO14_CONTROL                   0x4045
+#define WM831X_GPIO15_CONTROL                   0x4046
+#define WM831X_GPIO16_CONTROL                   0x4047
+#define WM831X_CHARGER_CONTROL_1                0x4048
+#define WM831X_CHARGER_CONTROL_2                0x4049
+#define WM831X_CHARGER_STATUS                   0x404A
+#define WM831X_BACKUP_CHARGER_CONTROL           0x404B
+#define WM831X_STATUS_LED_1                     0x404C
+#define WM831X_STATUS_LED_2                     0x404D
+#define WM831X_CURRENT_SINK_1                   0x404E
+#define WM831X_CURRENT_SINK_2                   0x404F
+#define WM831X_DCDC_ENABLE                      0x4050
+#define WM831X_LDO_ENABLE                       0x4051
+#define WM831X_DCDC_STATUS                      0x4052
+#define WM831X_LDO_STATUS                       0x4053
+#define WM831X_DCDC_UV_STATUS                   0x4054
+#define WM831X_LDO_UV_STATUS                    0x4055
+#define WM831X_DC1_CONTROL_1                    0x4056
+#define WM831X_DC1_CONTROL_2                    0x4057
+#define WM831X_DC1_ON_CONFIG                    0x4058
+#define WM831X_DC1_SLEEP_CONTROL                0x4059
+#define WM831X_DC1_DVS_CONTROL                  0x405A
+#define WM831X_DC2_CONTROL_1                    0x405B
+#define WM831X_DC2_CONTROL_2                    0x405C
+#define WM831X_DC2_ON_CONFIG                    0x405D
+#define WM831X_DC2_SLEEP_CONTROL                0x405E
+#define WM831X_DC2_DVS_CONTROL                  0x405F
+#define WM831X_DC3_CONTROL_1                    0x4060
+#define WM831X_DC3_CONTROL_2                    0x4061
+#define WM831X_DC3_ON_CONFIG                    0x4062
+#define WM831X_DC3_SLEEP_CONTROL                0x4063
+#define WM831X_DC4_CONTROL                      0x4064
+#define WM831X_DC4_SLEEP_CONTROL                0x4065
+#define WM831X_EPE1_CONTROL                     0x4066
+#define WM831X_EPE2_CONTROL                     0x4067
+#define WM831X_LDO1_CONTROL                     0x4068
+#define WM831X_LDO1_ON_CONTROL                  0x4069
+#define WM831X_LDO1_SLEEP_CONTROL               0x406A
+#define WM831X_LDO2_CONTROL                     0x406B
+#define WM831X_LDO2_ON_CONTROL                  0x406C
+#define WM831X_LDO2_SLEEP_CONTROL               0x406D
+#define WM831X_LDO3_CONTROL                     0x406E
+#define WM831X_LDO3_ON_CONTROL                  0x406F
+#define WM831X_LDO3_SLEEP_CONTROL               0x4070
+#define WM831X_LDO4_CONTROL                     0x4071
+#define WM831X_LDO4_ON_CONTROL                  0x4072
+#define WM831X_LDO4_SLEEP_CONTROL               0x4073
+#define WM831X_LDO5_CONTROL                     0x4074
+#define WM831X_LDO5_ON_CONTROL                  0x4075
+#define WM831X_LDO5_SLEEP_CONTROL               0x4076
+#define WM831X_LDO6_CONTROL                     0x4077
+#define WM831X_LDO6_ON_CONTROL                  0x4078
+#define WM831X_LDO6_SLEEP_CONTROL               0x4079
+#define WM831X_LDO7_CONTROL                     0x407A
+#define WM831X_LDO7_ON_CONTROL                  0x407B
+#define WM831X_LDO7_SLEEP_CONTROL               0x407C
+#define WM831X_LDO8_CONTROL                     0x407D
+#define WM831X_LDO8_ON_CONTROL                  0x407E
+#define WM831X_LDO8_SLEEP_CONTROL               0x407F
+#define WM831X_LDO9_CONTROL                     0x4080
+#define WM831X_LDO9_ON_CONTROL                  0x4081
+#define WM831X_LDO9_SLEEP_CONTROL               0x4082
+#define WM831X_LDO10_CONTROL                    0x4083
+#define WM831X_LDO10_ON_CONTROL                 0x4084
+#define WM831X_LDO10_SLEEP_CONTROL              0x4085
+#define WM831X_LDO11_ON_CONTROL                 0x4087
+#define WM831X_LDO11_SLEEP_CONTROL              0x4088
+#define WM831X_POWER_GOOD_SOURCE_1              0x408E
+#define WM831X_POWER_GOOD_SOURCE_2              0x408F
+#define WM831X_CLOCK_CONTROL_1                  0x4090
+#define WM831X_CLOCK_CONTROL_2                  0x4091
+#define WM831X_FLL_CONTROL_1                    0x4092
+#define WM831X_FLL_CONTROL_2                    0x4093
+#define WM831X_FLL_CONTROL_3                    0x4094
+#define WM831X_FLL_CONTROL_4                    0x4095
+#define WM831X_FLL_CONTROL_5                    0x4096
+#define WM831X_UNIQUE_ID_1                      0x7800
+#define WM831X_UNIQUE_ID_2                      0x7801
+#define WM831X_UNIQUE_ID_3                      0x7802
+#define WM831X_UNIQUE_ID_4                      0x7803
+#define WM831X_UNIQUE_ID_5                      0x7804
+#define WM831X_UNIQUE_ID_6                      0x7805
+#define WM831X_UNIQUE_ID_7                      0x7806
+#define WM831X_UNIQUE_ID_8                      0x7807
+#define WM831X_FACTORY_OTP_ID                   0x7808
+#define WM831X_FACTORY_OTP_1                    0x7809
+#define WM831X_FACTORY_OTP_2                    0x780A
+#define WM831X_FACTORY_OTP_3                    0x780B
+#define WM831X_FACTORY_OTP_4                    0x780C
+#define WM831X_FACTORY_OTP_5                    0x780D
+#define WM831X_CUSTOMER_OTP_ID                  0x7810
+#define WM831X_DC1_OTP_CONTROL                  0x7811
+#define WM831X_DC2_OTP_CONTROL                  0x7812
+#define WM831X_DC3_OTP_CONTROL                  0x7813
+#define WM831X_LDO1_2_OTP_CONTROL               0x7814
+#define WM831X_LDO3_4_OTP_CONTROL               0x7815
+#define WM831X_LDO5_6_OTP_CONTROL               0x7816
+#define WM831X_LDO7_8_OTP_CONTROL               0x7817
+#define WM831X_LDO9_10_OTP_CONTROL              0x7818
+#define WM831X_LDO11_EPE_CONTROL                0x7819
+#define WM831X_GPIO1_OTP_CONTROL                0x781A
+#define WM831X_GPIO2_OTP_CONTROL                0x781B
+#define WM831X_GPIO3_OTP_CONTROL                0x781C
+#define WM831X_GPIO4_OTP_CONTROL                0x781D
+#define WM831X_GPIO5_OTP_CONTROL                0x781E
+#define WM831X_GPIO6_OTP_CONTROL                0x781F
+#define WM831X_DBE_CHECK_DATA                   0x7827
+
+/*
+ * R0 (0x00) - Reset ID
+ */
+#define WM831X_CHIP_ID_MASK                     0xFFFF  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_SHIFT                         0  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_WIDTH                        16  /* CHIP_ID - [15:0] */
+
+/*
+ * R1 (0x01) - Revision
+ */
+#define WM831X_PARENT_REV_MASK                  0xFF00  /* PARENT_REV - [15:8] */
+#define WM831X_PARENT_REV_SHIFT                      8  /* PARENT_REV - [15:8] */
+#define WM831X_PARENT_REV_WIDTH                      8  /* PARENT_REV - [15:8] */
+#define WM831X_CHILD_REV_MASK                   0x00FF  /* CHILD_REV - [7:0] */
+#define WM831X_CHILD_REV_SHIFT                       0  /* CHILD_REV - [7:0] */
+#define WM831X_CHILD_REV_WIDTH                       8  /* CHILD_REV - [7:0] */
+
+/*
+ * R16384 (0x4000) - Parent ID
+ */
+#define WM831X_PARENT_ID_MASK                   0xFFFF  /* PARENT_ID - [15:0] */
+#define WM831X_PARENT_ID_SHIFT                       0  /* PARENT_ID - [15:0] */
+#define WM831X_PARENT_ID_WIDTH                      16  /* PARENT_ID - [15:0] */
+
+/*
+ * R16389 (0x4005) - ON Pin Control
+ */
+#define WM831X_ON_PIN_SECACT_MASK               0x0300  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_SHIFT                   8  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_WIDTH                   2  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_PRIMACT_MASK              0x0030  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_SHIFT                  4  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_WIDTH                  2  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_STS                       0x0008  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_MASK                  0x0008  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_SHIFT                      3  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_WIDTH                      1  /* ON_PIN_STS */
+#define WM831X_ON_PIN_TO_MASK                   0x0003  /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_SHIFT                       0  /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_WIDTH                       2  /* ON_PIN_TO - [1:0] */
+
+struct regulator_dev;
+
+struct wm831x {
+	struct mutex io_lock;
+
+	struct device *dev;
+	int (*read_dev)(struct wm831x *wm831x, unsigned short reg,
+			int bytes, void *dest);
+	int (*write_dev)(struct wm831x *wm831x, unsigned short reg,
+			 int bytes, void *src);
+
+	void *control_data;
+
+	int irq;  /* Our chip IRQ */
+	struct mutex irq_lock;
+	struct workqueue_struct *irq_wq;
+	struct work_struct irq_work;
+	unsigned int irq_base;
+	int irq_masks[5];
+
+	struct mutex auxadc_lock;
+
+	/* The WM831x has a security key blocking access to certain
+	 * registers.  The mutex is taken by the accessors for locking
+	 * and unlocking the security key, locked is used to fail
+	 * writes if the lock is held.
+	 */
+	struct mutex key_lock;
+	unsigned int locked:1;
+};
+
+/* Device I/O API */
+int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg);
+int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
+		 unsigned short val);
+void wm831x_reg_lock(struct wm831x *wm831x);
+int wm831x_reg_unlock(struct wm831x *wm831x);
+int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
+		    unsigned short mask, unsigned short val);
+int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
+		     int count, u16 *buf);
+
+int wm831x_irq_init(struct wm831x *wm831x, int irq);
+void wm831x_irq_exit(struct wm831x *wm831x);
+
+int __must_check wm831x_request_irq(struct wm831x *wm831x,
+				    unsigned int irq, irq_handler_t handler,
+				    unsigned long flags, const char *name,
+				    void *dev);
+void wm831x_free_irq(struct wm831x *wm831x, unsigned int, void *);
+void wm831x_disable_irq(struct wm831x *wm831x, int irq);
+void wm831x_enable_irq(struct wm831x *wm831x, int irq);
+
+#endif
diff --git a/include/linux/mfd/wm831x/gpio.h b/include/linux/mfd/wm831x/gpio.h
new file mode 100644
index 00000000000..2835614af0e
--- /dev/null
+++ b/include/linux/mfd/wm831x/gpio.h
@@ -0,0 +1,55 @@
+/*
+ * include/linux/mfd/wm831x/gpio.h -- GPIO for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_GPIO_H__
+#define __MFD_WM831X_GPIO_H__
+
+/*
+ * R16440-16455 (0x4038-0x4047) - GPIOx Control
+ */
+#define WM831X_GPN_DIR                          0x8000  /* GPN_DIR */
+#define WM831X_GPN_DIR_MASK                     0x8000  /* GPN_DIR */
+#define WM831X_GPN_DIR_SHIFT                        15  /* GPN_DIR */
+#define WM831X_GPN_DIR_WIDTH                         1  /* GPN_DIR */
+#define WM831X_GPN_PULL_MASK                    0x6000  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_PULL_SHIFT                       13  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_PULL_WIDTH                        2  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_INT_MODE                     0x1000  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_MASK                0x1000  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_SHIFT                   12  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_WIDTH                    1  /* GPN_INT_MODE */
+#define WM831X_GPN_PWR_DOM                      0x0800  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_MASK                 0x0800  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_SHIFT                    11  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_WIDTH                     1  /* GPN_PWR_DOM */
+#define WM831X_GPN_POL                          0x0400  /* GPN_POL */
+#define WM831X_GPN_POL_MASK                     0x0400  /* GPN_POL */
+#define WM831X_GPN_POL_SHIFT                        10  /* GPN_POL */
+#define WM831X_GPN_POL_WIDTH                         1  /* GPN_POL */
+#define WM831X_GPN_OD                           0x0200  /* GPN_OD */
+#define WM831X_GPN_OD_MASK                      0x0200  /* GPN_OD */
+#define WM831X_GPN_OD_SHIFT                          9  /* GPN_OD */
+#define WM831X_GPN_OD_WIDTH                          1  /* GPN_OD */
+#define WM831X_GPN_TRI                          0x0080  /* GPN_TRI */
+#define WM831X_GPN_TRI_MASK                     0x0080  /* GPN_TRI */
+#define WM831X_GPN_TRI_SHIFT                         7  /* GPN_TRI */
+#define WM831X_GPN_TRI_WIDTH                         1  /* GPN_TRI */
+#define WM831X_GPN_FN_MASK                      0x000F  /* GPN_FN - [3:0] */
+#define WM831X_GPN_FN_SHIFT                          0  /* GPN_FN - [3:0] */
+#define WM831X_GPN_FN_WIDTH                          4  /* GPN_FN - [3:0] */
+
+#define WM831X_GPIO_PULL_NONE (0 << WM831X_GPN_PULL_SHIFT)
+#define WM831X_GPIO_PULL_DOWN (1 << WM831X_GPN_PULL_SHIFT)
+#define WM831X_GPIO_PULL_UP   (2 << WM831X_GPN_PULL_SHIFT)
+#endif
diff --git a/include/linux/mfd/wm831x/irq.h b/include/linux/mfd/wm831x/irq.h
new file mode 100644
index 00000000000..3a8c97656fd
--- /dev/null
+++ b/include/linux/mfd/wm831x/irq.h
@@ -0,0 +1,764 @@
+/*
+ * include/linux/mfd/wm831x/irq.h -- Interrupt controller for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_IRQ_H__
+#define __MFD_WM831X_IRQ_H__
+
+/* Interrupt number assignments within Linux */
+#define WM831X_IRQ_TEMP_THW 0
+#define WM831X_IRQ_GPIO_1   1
+#define WM831X_IRQ_GPIO_2   2
+#define WM831X_IRQ_GPIO_3   3
+#define WM831X_IRQ_GPIO_4   4
+#define WM831X_IRQ_GPIO_5   5
+#define WM831X_IRQ_GPIO_6   6
+#define WM831X_IRQ_GPIO_7   7
+#define WM831X_IRQ_GPIO_8   8
+#define WM831X_IRQ_GPIO_9   9
+#define WM831X_IRQ_GPIO_10  10
+#define WM831X_IRQ_GPIO_11  11
+#define WM831X_IRQ_GPIO_12  12
+#define WM831X_IRQ_GPIO_13  13
+#define WM831X_IRQ_GPIO_14  14
+#define WM831X_IRQ_GPIO_15  15
+#define WM831X_IRQ_GPIO_16  16
+#define WM831X_IRQ_ON           17
+#define WM831X_IRQ_PPM_SYSLO    18
+#define WM831X_IRQ_PPM_PWR_SRC  19
+#define WM831X_IRQ_PPM_USB_CURR 20
+#define WM831X_IRQ_WDOG_TO      21
+#define WM831X_IRQ_RTC_PER      22
+#define WM831X_IRQ_RTC_ALM      23
+#define WM831X_IRQ_CHG_BATT_HOT  24
+#define WM831X_IRQ_CHG_BATT_COLD 25
+#define WM831X_IRQ_CHG_BATT_FAIL 26
+#define WM831X_IRQ_CHG_OV        27
+#define WM831X_IRQ_CHG_END       29
+#define WM831X_IRQ_CHG_TO        30
+#define WM831X_IRQ_CHG_MODE      31
+#define WM831X_IRQ_CHG_START     32
+#define WM831X_IRQ_TCHDATA       33
+#define WM831X_IRQ_TCHPD         34
+#define WM831X_IRQ_AUXADC_DATA   35
+#define WM831X_IRQ_AUXADC_DCOMP1 36
+#define WM831X_IRQ_AUXADC_DCOMP2 37
+#define WM831X_IRQ_AUXADC_DCOMP3 38
+#define WM831X_IRQ_AUXADC_DCOMP4 39
+#define WM831X_IRQ_CS1           40
+#define WM831X_IRQ_CS2           41
+#define WM831X_IRQ_HC_DC1        42
+#define WM831X_IRQ_HC_DC2        43
+#define WM831X_IRQ_UV_LDO1       44
+#define WM831X_IRQ_UV_LDO2       45
+#define WM831X_IRQ_UV_LDO3       46
+#define WM831X_IRQ_UV_LDO4       47
+#define WM831X_IRQ_UV_LDO5       48
+#define WM831X_IRQ_UV_LDO6       49
+#define WM831X_IRQ_UV_LDO7       50
+#define WM831X_IRQ_UV_LDO8       51
+#define WM831X_IRQ_UV_LDO9       52
+#define WM831X_IRQ_UV_LDO10      53
+#define WM831X_IRQ_UV_DC1        54
+#define WM831X_IRQ_UV_DC2        55
+#define WM831X_IRQ_UV_DC3        56
+#define WM831X_IRQ_UV_DC4        57
+
+#define WM831X_NUM_IRQS     58
+
+/*
+ * R16400 (0x4010) - System Interrupts
+ */
+#define WM831X_PS_INT                           0x8000  /* PS_INT */
+#define WM831X_PS_INT_MASK                      0x8000  /* PS_INT */
+#define WM831X_PS_INT_SHIFT                         15  /* PS_INT */
+#define WM831X_PS_INT_WIDTH                          1  /* PS_INT */
+#define WM831X_TEMP_INT                         0x4000  /* TEMP_INT */
+#define WM831X_TEMP_INT_MASK                    0x4000  /* TEMP_INT */
+#define WM831X_TEMP_INT_SHIFT                       14  /* TEMP_INT */
+#define WM831X_TEMP_INT_WIDTH                        1  /* TEMP_INT */
+#define WM831X_GP_INT                           0x2000  /* GP_INT */
+#define WM831X_GP_INT_MASK                      0x2000  /* GP_INT */
+#define WM831X_GP_INT_SHIFT                         13  /* GP_INT */
+#define WM831X_GP_INT_WIDTH                          1  /* GP_INT */
+#define WM831X_ON_PIN_INT                       0x1000  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_MASK                  0x1000  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_SHIFT                     12  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_WIDTH                      1  /* ON_PIN_INT */
+#define WM831X_WDOG_INT                         0x0800  /* WDOG_INT */
+#define WM831X_WDOG_INT_MASK                    0x0800  /* WDOG_INT */
+#define WM831X_WDOG_INT_SHIFT                       11  /* WDOG_INT */
+#define WM831X_WDOG_INT_WIDTH                        1  /* WDOG_INT */
+#define WM831X_TCHDATA_INT                      0x0400  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_MASK                 0x0400  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_SHIFT                    10  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_WIDTH                     1  /* TCHDATA_INT */
+#define WM831X_TCHPD_INT                        0x0200  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_MASK                   0x0200  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_SHIFT                       9  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_WIDTH                       1  /* TCHPD_INT */
+#define WM831X_AUXADC_INT                       0x0100  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_MASK                  0x0100  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_SHIFT                      8  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_WIDTH                      1  /* AUXADC_INT */
+#define WM831X_PPM_INT                          0x0080  /* PPM_INT */
+#define WM831X_PPM_INT_MASK                     0x0080  /* PPM_INT */
+#define WM831X_PPM_INT_SHIFT                         7  /* PPM_INT */
+#define WM831X_PPM_INT_WIDTH                         1  /* PPM_INT */
+#define WM831X_CS_INT                           0x0040  /* CS_INT */
+#define WM831X_CS_INT_MASK                      0x0040  /* CS_INT */
+#define WM831X_CS_INT_SHIFT                          6  /* CS_INT */
+#define WM831X_CS_INT_WIDTH                          1  /* CS_INT */
+#define WM831X_RTC_INT                          0x0020  /* RTC_INT */
+#define WM831X_RTC_INT_MASK                     0x0020  /* RTC_INT */
+#define WM831X_RTC_INT_SHIFT                         5  /* RTC_INT */
+#define WM831X_RTC_INT_WIDTH                         1  /* RTC_INT */
+#define WM831X_OTP_INT                          0x0010  /* OTP_INT */
+#define WM831X_OTP_INT_MASK                     0x0010  /* OTP_INT */
+#define WM831X_OTP_INT_SHIFT                         4  /* OTP_INT */
+#define WM831X_OTP_INT_WIDTH                         1  /* OTP_INT */
+#define WM831X_CHILD_INT                        0x0008  /* CHILD_INT */
+#define WM831X_CHILD_INT_MASK                   0x0008  /* CHILD_INT */
+#define WM831X_CHILD_INT_SHIFT                       3  /* CHILD_INT */
+#define WM831X_CHILD_INT_WIDTH                       1  /* CHILD_INT */
+#define WM831X_CHG_INT                          0x0004  /* CHG_INT */
+#define WM831X_CHG_INT_MASK                     0x0004  /* CHG_INT */
+#define WM831X_CHG_INT_SHIFT                         2  /* CHG_INT */
+#define WM831X_CHG_INT_WIDTH                         1  /* CHG_INT */
+#define WM831X_HC_INT                           0x0002  /* HC_INT */
+#define WM831X_HC_INT_MASK                      0x0002  /* HC_INT */
+#define WM831X_HC_INT_SHIFT                          1  /* HC_INT */
+#define WM831X_HC_INT_WIDTH                          1  /* HC_INT */
+#define WM831X_UV_INT                           0x0001  /* UV_INT */
+#define WM831X_UV_INT_MASK                      0x0001  /* UV_INT */
+#define WM831X_UV_INT_SHIFT                          0  /* UV_INT */
+#define WM831X_UV_INT_WIDTH                          1  /* UV_INT */
+
+/*
+ * R16401 (0x4011) - Interrupt Status 1
+ */
+#define WM831X_PPM_SYSLO_EINT                   0x8000  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_MASK              0x8000  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_SHIFT                 15  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_WIDTH                  1  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_PWR_SRC_EINT                 0x4000  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_MASK            0x4000  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_SHIFT               14  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_WIDTH                1  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_USB_CURR_EINT                0x2000  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_MASK           0x2000  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_SHIFT              13  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_WIDTH               1  /* PPM_USB_CURR_EINT */
+#define WM831X_ON_PIN_EINT                      0x1000  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_MASK                 0x1000  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_SHIFT                    12  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_WIDTH                     1  /* ON_PIN_EINT */
+#define WM831X_WDOG_TO_EINT                     0x0800  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_MASK                0x0800  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_SHIFT                   11  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_WIDTH                    1  /* WDOG_TO_EINT */
+#define WM831X_TCHDATA_EINT                     0x0400  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_MASK                0x0400  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_SHIFT                   10  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_WIDTH                    1  /* TCHDATA_EINT */
+#define WM831X_TCHPD_EINT                       0x0200  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_MASK                  0x0200  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_SHIFT                      9  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_WIDTH                      1  /* TCHPD_EINT */
+#define WM831X_AUXADC_DATA_EINT                 0x0100  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_MASK            0x0100  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_SHIFT                8  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_WIDTH                1  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT               0x0080  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_MASK          0x0080  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_SHIFT              7  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_WIDTH              1  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT               0x0040  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_MASK          0x0040  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_SHIFT              6  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_WIDTH              1  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT               0x0020  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_MASK          0x0020  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_SHIFT              5  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_WIDTH              1  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT               0x0010  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_MASK          0x0010  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_SHIFT              4  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_WIDTH              1  /* AUXADC_DCOMP1_EINT */
+#define WM831X_RTC_PER_EINT                     0x0008  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_MASK                0x0008  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_SHIFT                    3  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_WIDTH                    1  /* RTC_PER_EINT */
+#define WM831X_RTC_ALM_EINT                     0x0004  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_MASK                0x0004  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_SHIFT                    2  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_WIDTH                    1  /* RTC_ALM_EINT */
+#define WM831X_TEMP_THW_EINT                    0x0002  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_MASK               0x0002  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_SHIFT                   1  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_WIDTH                   1  /* TEMP_THW_EINT */
+
+/*
+ * R16402 (0x4012) - Interrupt Status 2
+ */
+#define WM831X_CHG_BATT_HOT_EINT                0x8000  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_MASK           0x8000  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_SHIFT              15  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_WIDTH               1  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_COLD_EINT               0x4000  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_MASK          0x4000  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_SHIFT             14  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_WIDTH              1  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT               0x2000  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_MASK          0x2000  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_SHIFT             13  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_WIDTH              1  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_OV_EINT                      0x1000  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_MASK                 0x1000  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_SHIFT                    12  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_WIDTH                     1  /* CHG_OV_EINT */
+#define WM831X_CHG_END_EINT                     0x0800  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_MASK                0x0800  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_SHIFT                   11  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_WIDTH                    1  /* CHG_END_EINT */
+#define WM831X_CHG_TO_EINT                      0x0400  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_MASK                 0x0400  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_SHIFT                    10  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_WIDTH                     1  /* CHG_TO_EINT */
+#define WM831X_CHG_MODE_EINT                    0x0200  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_MASK               0x0200  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_SHIFT                   9  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_WIDTH                   1  /* CHG_MODE_EINT */
+#define WM831X_CHG_START_EINT                   0x0100  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_MASK              0x0100  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_SHIFT                  8  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_WIDTH                  1  /* CHG_START_EINT */
+#define WM831X_CS2_EINT                         0x0080  /* CS2_EINT */
+#define WM831X_CS2_EINT_MASK                    0x0080  /* CS2_EINT */
+#define WM831X_CS2_EINT_SHIFT                        7  /* CS2_EINT */
+#define WM831X_CS2_EINT_WIDTH                        1  /* CS2_EINT */
+#define WM831X_CS1_EINT                         0x0040  /* CS1_EINT */
+#define WM831X_CS1_EINT_MASK                    0x0040  /* CS1_EINT */
+#define WM831X_CS1_EINT_SHIFT                        6  /* CS1_EINT */
+#define WM831X_CS1_EINT_WIDTH                        1  /* CS1_EINT */
+#define WM831X_OTP_CMD_END_EINT                 0x0020  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_MASK            0x0020  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_SHIFT                5  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_WIDTH                1  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_ERR_EINT                     0x0010  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_MASK                0x0010  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_SHIFT                    4  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_WIDTH                    1  /* OTP_ERR_EINT */
+#define WM831X_PS_POR_EINT                      0x0004  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_MASK                 0x0004  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_SHIFT                     2  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_WIDTH                     1  /* PS_POR_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT                0x0002  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_MASK           0x0002  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_SHIFT               1  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_WIDTH               1  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_ON_WAKE_EINT                  0x0001  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_MASK             0x0001  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_SHIFT                 0  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_WIDTH                 1  /* PS_ON_WAKE_EINT */
+
+/*
+ * R16403 (0x4013) - Interrupt Status 3
+ */
+#define WM831X_UV_LDO10_EINT                    0x0200  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_MASK               0x0200  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_SHIFT                   9  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_WIDTH                   1  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO9_EINT                     0x0100  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_MASK                0x0100  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_SHIFT                    8  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_WIDTH                    1  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO8_EINT                     0x0080  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_MASK                0x0080  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_SHIFT                    7  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_WIDTH                    1  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO7_EINT                     0x0040  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_MASK                0x0040  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_SHIFT                    6  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_WIDTH                    1  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO6_EINT                     0x0020  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_MASK                0x0020  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_SHIFT                    5  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_WIDTH                    1  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO5_EINT                     0x0010  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_MASK                0x0010  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_SHIFT                    4  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_WIDTH                    1  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO4_EINT                     0x0008  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_MASK                0x0008  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_SHIFT                    3  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_WIDTH                    1  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO3_EINT                     0x0004  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_MASK                0x0004  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_SHIFT                    2  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_WIDTH                    1  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO2_EINT                     0x0002  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_MASK                0x0002  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_SHIFT                    1  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_WIDTH                    1  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO1_EINT                     0x0001  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_MASK                0x0001  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_SHIFT                    0  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_WIDTH                    1  /* UV_LDO1_EINT */
+
+/*
+ * R16404 (0x4014) - Interrupt Status 4
+ */
+#define WM831X_HC_DC2_EINT                      0x0200  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_MASK                 0x0200  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_SHIFT                     9  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_WIDTH                     1  /* HC_DC2_EINT */
+#define WM831X_HC_DC1_EINT                      0x0100  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_MASK                 0x0100  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_SHIFT                     8  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_WIDTH                     1  /* HC_DC1_EINT */
+#define WM831X_UV_DC4_EINT                      0x0008  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_MASK                 0x0008  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_SHIFT                     3  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_WIDTH                     1  /* UV_DC4_EINT */
+#define WM831X_UV_DC3_EINT                      0x0004  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_MASK                 0x0004  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_SHIFT                     2  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_WIDTH                     1  /* UV_DC3_EINT */
+#define WM831X_UV_DC2_EINT                      0x0002  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_MASK                 0x0002  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_SHIFT                     1  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_WIDTH                     1  /* UV_DC2_EINT */
+#define WM831X_UV_DC1_EINT                      0x0001  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_MASK                 0x0001  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_SHIFT                     0  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_WIDTH                     1  /* UV_DC1_EINT */
+
+/*
+ * R16405 (0x4015) - Interrupt Status 5
+ */
+#define WM831X_GP16_EINT                        0x8000  /* GP16_EINT */
+#define WM831X_GP16_EINT_MASK                   0x8000  /* GP16_EINT */
+#define WM831X_GP16_EINT_SHIFT                      15  /* GP16_EINT */
+#define WM831X_GP16_EINT_WIDTH                       1  /* GP16_EINT */
+#define WM831X_GP15_EINT                        0x4000  /* GP15_EINT */
+#define WM831X_GP15_EINT_MASK                   0x4000  /* GP15_EINT */
+#define WM831X_GP15_EINT_SHIFT                      14  /* GP15_EINT */
+#define WM831X_GP15_EINT_WIDTH                       1  /* GP15_EINT */
+#define WM831X_GP14_EINT                        0x2000  /* GP14_EINT */
+#define WM831X_GP14_EINT_MASK                   0x2000  /* GP14_EINT */
+#define WM831X_GP14_EINT_SHIFT                      13  /* GP14_EINT */
+#define WM831X_GP14_EINT_WIDTH                       1  /* GP14_EINT */
+#define WM831X_GP13_EINT                        0x1000  /* GP13_EINT */
+#define WM831X_GP13_EINT_MASK                   0x1000  /* GP13_EINT */
+#define WM831X_GP13_EINT_SHIFT                      12  /* GP13_EINT */
+#define WM831X_GP13_EINT_WIDTH                       1  /* GP13_EINT */
+#define WM831X_GP12_EINT                        0x0800  /* GP12_EINT */
+#define WM831X_GP12_EINT_MASK                   0x0800  /* GP12_EINT */
+#define WM831X_GP12_EINT_SHIFT                      11  /* GP12_EINT */
+#define WM831X_GP12_EINT_WIDTH                       1  /* GP12_EINT */
+#define WM831X_GP11_EINT                        0x0400  /* GP11_EINT */
+#define WM831X_GP11_EINT_MASK                   0x0400  /* GP11_EINT */
+#define WM831X_GP11_EINT_SHIFT                      10  /* GP11_EINT */
+#define WM831X_GP11_EINT_WIDTH                       1  /* GP11_EINT */
+#define WM831X_GP10_EINT                        0x0200  /* GP10_EINT */
+#define WM831X_GP10_EINT_MASK                   0x0200  /* GP10_EINT */
+#define WM831X_GP10_EINT_SHIFT                       9  /* GP10_EINT */
+#define WM831X_GP10_EINT_WIDTH                       1  /* GP10_EINT */
+#define WM831X_GP9_EINT                         0x0100  /* GP9_EINT */
+#define WM831X_GP9_EINT_MASK                    0x0100  /* GP9_EINT */
+#define WM831X_GP9_EINT_SHIFT                        8  /* GP9_EINT */
+#define WM831X_GP9_EINT_WIDTH                        1  /* GP9_EINT */
+#define WM831X_GP8_EINT                         0x0080  /* GP8_EINT */
+#define WM831X_GP8_EINT_MASK                    0x0080  /* GP8_EINT */
+#define WM831X_GP8_EINT_SHIFT                        7  /* GP8_EINT */
+#define WM831X_GP8_EINT_WIDTH                        1  /* GP8_EINT */
+#define WM831X_GP7_EINT                         0x0040  /* GP7_EINT */
+#define WM831X_GP7_EINT_MASK                    0x0040  /* GP7_EINT */
+#define WM831X_GP7_EINT_SHIFT                        6  /* GP7_EINT */
+#define WM831X_GP7_EINT_WIDTH                        1  /* GP7_EINT */
+#define WM831X_GP6_EINT                         0x0020  /* GP6_EINT */
+#define WM831X_GP6_EINT_MASK                    0x0020  /* GP6_EINT */
+#define WM831X_GP6_EINT_SHIFT                        5  /* GP6_EINT */
+#define WM831X_GP6_EINT_WIDTH                        1  /* GP6_EINT */
+#define WM831X_GP5_EINT                         0x0010  /* GP5_EINT */
+#define WM831X_GP5_EINT_MASK                    0x0010  /* GP5_EINT */
+#define WM831X_GP5_EINT_SHIFT                        4  /* GP5_EINT */
+#define WM831X_GP5_EINT_WIDTH                        1  /* GP5_EINT */
+#define WM831X_GP4_EINT                         0x0008  /* GP4_EINT */
+#define WM831X_GP4_EINT_MASK                    0x0008  /* GP4_EINT */
+#define WM831X_GP4_EINT_SHIFT                        3  /* GP4_EINT */
+#define WM831X_GP4_EINT_WIDTH                        1  /* GP4_EINT */
+#define WM831X_GP3_EINT                         0x0004  /* GP3_EINT */
+#define WM831X_GP3_EINT_MASK                    0x0004  /* GP3_EINT */
+#define WM831X_GP3_EINT_SHIFT                        2  /* GP3_EINT */
+#define WM831X_GP3_EINT_WIDTH                        1  /* GP3_EINT */
+#define WM831X_GP2_EINT                         0x0002  /* GP2_EINT */
+#define WM831X_GP2_EINT_MASK                    0x0002  /* GP2_EINT */
+#define WM831X_GP2_EINT_SHIFT                        1  /* GP2_EINT */
+#define WM831X_GP2_EINT_WIDTH                        1  /* GP2_EINT */
+#define WM831X_GP1_EINT                         0x0001  /* GP1_EINT */
+#define WM831X_GP1_EINT_MASK                    0x0001  /* GP1_EINT */
+#define WM831X_GP1_EINT_SHIFT                        0  /* GP1_EINT */
+#define WM831X_GP1_EINT_WIDTH                        1  /* GP1_EINT */
+
+/*
+ * R16407 (0x4017) - IRQ Config
+ */
+#define WM831X_IRQ_OD                           0x0002  /* IRQ_OD */
+#define WM831X_IRQ_OD_MASK                      0x0002  /* IRQ_OD */
+#define WM831X_IRQ_OD_SHIFT                          1  /* IRQ_OD */
+#define WM831X_IRQ_OD_WIDTH                          1  /* IRQ_OD */
+#define WM831X_IM_IRQ                           0x0001  /* IM_IRQ */
+#define WM831X_IM_IRQ_MASK                      0x0001  /* IM_IRQ */
+#define WM831X_IM_IRQ_SHIFT                          0  /* IM_IRQ */
+#define WM831X_IM_IRQ_WIDTH                          1  /* IM_IRQ */
+
+/*
+ * R16408 (0x4018) - System Interrupts Mask
+ */
+#define WM831X_IM_PS_INT                        0x8000  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_MASK                   0x8000  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_SHIFT                      15  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_WIDTH                       1  /* IM_PS_INT */
+#define WM831X_IM_TEMP_INT                      0x4000  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_MASK                 0x4000  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_SHIFT                    14  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_WIDTH                     1  /* IM_TEMP_INT */
+#define WM831X_IM_GP_INT                        0x2000  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_MASK                   0x2000  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_SHIFT                      13  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_WIDTH                       1  /* IM_GP_INT */
+#define WM831X_IM_ON_PIN_INT                    0x1000  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_MASK               0x1000  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_SHIFT                  12  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_WIDTH                   1  /* IM_ON_PIN_INT */
+#define WM831X_IM_WDOG_INT                      0x0800  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_MASK                 0x0800  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_SHIFT                    11  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_WIDTH                     1  /* IM_WDOG_INT */
+#define WM831X_IM_TCHDATA_INT                   0x0400  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_MASK              0x0400  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_SHIFT                 10  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_WIDTH                  1  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHPD_INT                     0x0200  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_MASK                0x0200  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_SHIFT                    9  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_WIDTH                    1  /* IM_TCHPD_INT */
+#define WM831X_IM_AUXADC_INT                    0x0100  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_MASK               0x0100  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_SHIFT                   8  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_WIDTH                   1  /* IM_AUXADC_INT */
+#define WM831X_IM_PPM_INT                       0x0080  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_MASK                  0x0080  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_SHIFT                      7  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_WIDTH                      1  /* IM_PPM_INT */
+#define WM831X_IM_CS_INT                        0x0040  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_MASK                   0x0040  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_SHIFT                       6  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_WIDTH                       1  /* IM_CS_INT */
+#define WM831X_IM_RTC_INT                       0x0020  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_MASK                  0x0020  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_SHIFT                      5  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_WIDTH                      1  /* IM_RTC_INT */
+#define WM831X_IM_OTP_INT                       0x0010  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_MASK                  0x0010  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_SHIFT                      4  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_WIDTH                      1  /* IM_OTP_INT */
+#define WM831X_IM_CHILD_INT                     0x0008  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_MASK                0x0008  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_SHIFT                    3  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_WIDTH                    1  /* IM_CHILD_INT */
+#define WM831X_IM_CHG_INT                       0x0004  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_MASK                  0x0004  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_SHIFT                      2  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_WIDTH                      1  /* IM_CHG_INT */
+#define WM831X_IM_HC_INT                        0x0002  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_MASK                   0x0002  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_SHIFT                       1  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_WIDTH                       1  /* IM_HC_INT */
+#define WM831X_IM_UV_INT                        0x0001  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_MASK                   0x0001  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_SHIFT                       0  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_WIDTH                       1  /* IM_UV_INT */
+
+/*
+ * R16409 (0x4019) - Interrupt Status 1 Mask
+ */
+#define WM831X_IM_PPM_SYSLO_EINT                0x8000  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_MASK           0x8000  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_SHIFT              15  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_WIDTH               1  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT              0x4000  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_MASK         0x4000  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_SHIFT            14  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_WIDTH             1  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT             0x2000  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_MASK        0x2000  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_SHIFT           13  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_WIDTH            1  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_ON_PIN_EINT                   0x1000  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_MASK              0x1000  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_SHIFT                 12  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_WIDTH                  1  /* IM_ON_PIN_EINT */
+#define WM831X_IM_WDOG_TO_EINT                  0x0800  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_MASK             0x0800  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_SHIFT                11  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_WIDTH                 1  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_TCHDATA_EINT                  0x0400  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_MASK             0x0400  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_SHIFT                10  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_WIDTH                 1  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHPD_EINT                    0x0200  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_MASK               0x0200  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_SHIFT                   9  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_WIDTH                   1  /* IM_TCHPD_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT              0x0100  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_MASK         0x0100  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_SHIFT             8  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_WIDTH             1  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT            0x0080  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_MASK       0x0080  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_SHIFT           7  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_WIDTH           1  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT            0x0040  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_MASK       0x0040  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_SHIFT           6  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_WIDTH           1  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT            0x0020  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_MASK       0x0020  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_SHIFT           5  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_WIDTH           1  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT            0x0010  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_MASK       0x0010  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_SHIFT           4  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_WIDTH           1  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_RTC_PER_EINT                  0x0008  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_MASK             0x0008  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_SHIFT                 3  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_WIDTH                 1  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_ALM_EINT                  0x0004  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_MASK             0x0004  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_SHIFT                 2  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_WIDTH                 1  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_TEMP_THW_EINT                 0x0002  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_MASK            0x0002  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_SHIFT                1  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_WIDTH                1  /* IM_TEMP_THW_EINT */
+
+/*
+ * R16410 (0x401A) - Interrupt Status 2 Mask
+ */
+#define WM831X_IM_CHG_BATT_HOT_EINT             0x8000  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_MASK        0x8000  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_SHIFT           15  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_WIDTH            1  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT            0x4000  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_MASK       0x4000  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_SHIFT          14  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_WIDTH           1  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT            0x2000  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_MASK       0x2000  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_SHIFT          13  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_WIDTH           1  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_OV_EINT                   0x1000  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_MASK              0x1000  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_SHIFT                 12  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_WIDTH                  1  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_END_EINT                  0x0800  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_MASK             0x0800  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_SHIFT                11  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_WIDTH                 1  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_TO_EINT                   0x0400  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_MASK              0x0400  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_SHIFT                 10  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_WIDTH                  1  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_MODE_EINT                 0x0200  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_MASK            0x0200  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_SHIFT                9  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_WIDTH                1  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_START_EINT                0x0100  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_MASK           0x0100  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_SHIFT               8  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_WIDTH               1  /* IM_CHG_START_EINT */
+#define WM831X_IM_CS2_EINT                      0x0080  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_MASK                 0x0080  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_SHIFT                     7  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_WIDTH                     1  /* IM_CS2_EINT */
+#define WM831X_IM_CS1_EINT                      0x0040  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_MASK                 0x0040  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_SHIFT                     6  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_WIDTH                     1  /* IM_CS1_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT              0x0020  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_MASK         0x0020  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_SHIFT             5  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_WIDTH             1  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_ERR_EINT                  0x0010  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_MASK             0x0010  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_SHIFT                 4  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_WIDTH                 1  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_PS_POR_EINT                   0x0004  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_MASK              0x0004  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_SHIFT                  2  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_WIDTH                  1  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT             0x0002  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_MASK        0x0002  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_SHIFT            1  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_WIDTH            1  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT               0x0001  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_MASK          0x0001  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_SHIFT              0  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_WIDTH              1  /* IM_PS_ON_WAKE_EINT */
+
+/*
+ * R16411 (0x401B) - Interrupt Status 3 Mask
+ */
+#define WM831X_IM_UV_LDO10_EINT                 0x0200  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_MASK            0x0200  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_SHIFT                9  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_WIDTH                1  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO9_EINT                  0x0100  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_MASK             0x0100  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_SHIFT                 8  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_WIDTH                 1  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO8_EINT                  0x0080  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_MASK             0x0080  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_SHIFT                 7  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_WIDTH                 1  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO7_EINT                  0x0040  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_MASK             0x0040  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_SHIFT                 6  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_WIDTH                 1  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO6_EINT                  0x0020  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_MASK             0x0020  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_SHIFT                 5  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_WIDTH                 1  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO5_EINT                  0x0010  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_MASK             0x0010  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_SHIFT                 4  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_WIDTH                 1  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO4_EINT                  0x0008  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_MASK             0x0008  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_SHIFT                 3  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_WIDTH                 1  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO3_EINT                  0x0004  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_MASK             0x0004  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_SHIFT                 2  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_WIDTH                 1  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO2_EINT                  0x0002  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_MASK             0x0002  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_SHIFT                 1  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_WIDTH                 1  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO1_EINT                  0x0001  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_MASK             0x0001  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_SHIFT                 0  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_WIDTH                 1  /* IM_UV_LDO1_EINT */
+
+/*
+ * R16412 (0x401C) - Interrupt Status 4 Mask
+ */
+#define WM831X_IM_HC_DC2_EINT                   0x0200  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_MASK              0x0200  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_SHIFT                  9  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_WIDTH                  1  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC1_EINT                   0x0100  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_MASK              0x0100  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_SHIFT                  8  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_WIDTH                  1  /* IM_HC_DC1_EINT */
+#define WM831X_IM_UV_DC4_EINT                   0x0008  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_MASK              0x0008  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_SHIFT                  3  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_WIDTH                  1  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC3_EINT                   0x0004  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_MASK              0x0004  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_SHIFT                  2  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_WIDTH                  1  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC2_EINT                   0x0002  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_MASK              0x0002  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_SHIFT                  1  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_WIDTH                  1  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC1_EINT                   0x0001  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_MASK              0x0001  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_SHIFT                  0  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_WIDTH                  1  /* IM_UV_DC1_EINT */
+
+/*
+ * R16413 (0x401D) - Interrupt Status 5 Mask
+ */
+#define WM831X_IM_GP16_EINT                     0x8000  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_MASK                0x8000  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_SHIFT                   15  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_WIDTH                    1  /* IM_GP16_EINT */
+#define WM831X_IM_GP15_EINT                     0x4000  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_MASK                0x4000  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_SHIFT                   14  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_WIDTH                    1  /* IM_GP15_EINT */
+#define WM831X_IM_GP14_EINT                     0x2000  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_MASK                0x2000  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_SHIFT                   13  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_WIDTH                    1  /* IM_GP14_EINT */
+#define WM831X_IM_GP13_EINT                     0x1000  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_MASK                0x1000  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_SHIFT                   12  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_WIDTH                    1  /* IM_GP13_EINT */
+#define WM831X_IM_GP12_EINT                     0x0800  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_MASK                0x0800  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_SHIFT                   11  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_WIDTH                    1  /* IM_GP12_EINT */
+#define WM831X_IM_GP11_EINT                     0x0400  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_MASK                0x0400  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_SHIFT                   10  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_WIDTH                    1  /* IM_GP11_EINT */
+#define WM831X_IM_GP10_EINT                     0x0200  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_MASK                0x0200  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_SHIFT                    9  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_WIDTH                    1  /* IM_GP10_EINT */
+#define WM831X_IM_GP9_EINT                      0x0100  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_MASK                 0x0100  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_SHIFT                     8  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_WIDTH                     1  /* IM_GP9_EINT */
+#define WM831X_IM_GP8_EINT                      0x0080  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_MASK                 0x0080  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_SHIFT                     7  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_WIDTH                     1  /* IM_GP8_EINT */
+#define WM831X_IM_GP7_EINT                      0x0040  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_MASK                 0x0040  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_SHIFT                     6  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_WIDTH                     1  /* IM_GP7_EINT */
+#define WM831X_IM_GP6_EINT                      0x0020  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_MASK                 0x0020  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_SHIFT                     5  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_WIDTH                     1  /* IM_GP6_EINT */
+#define WM831X_IM_GP5_EINT                      0x0010  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_MASK                 0x0010  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_SHIFT                     4  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_WIDTH                     1  /* IM_GP5_EINT */
+#define WM831X_IM_GP4_EINT                      0x0008  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_MASK                 0x0008  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_SHIFT                     3  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_WIDTH                     1  /* IM_GP4_EINT */
+#define WM831X_IM_GP3_EINT                      0x0004  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_MASK                 0x0004  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_SHIFT                     2  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_WIDTH                     1  /* IM_GP3_EINT */
+#define WM831X_IM_GP2_EINT                      0x0002  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_MASK                 0x0002  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_SHIFT                     1  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_WIDTH                     1  /* IM_GP2_EINT */
+#define WM831X_IM_GP1_EINT                      0x0001  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_MASK                 0x0001  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_SHIFT                     0  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_WIDTH                     1  /* IM_GP1_EINT */
+
+
+#endif
diff --git a/include/linux/mfd/wm831x/otp.h b/include/linux/mfd/wm831x/otp.h
new file mode 100644
index 00000000000..ce1f81a39bf
--- /dev/null
+++ b/include/linux/mfd/wm831x/otp.h
@@ -0,0 +1,162 @@
+/*
+ * include/linux/mfd/wm831x/otp.h -- OTP interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_OTP_H__
+#define __MFD_WM831X_OTP_H__
+
+int wm831x_otp_init(struct wm831x *wm831x);
+void wm831x_otp_exit(struct wm831x *wm831x);
+
+/*
+ * R30720 (0x7800) - Unique ID 1
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30721 (0x7801) - Unique ID 2
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30722 (0x7802) - Unique ID 3
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30723 (0x7803) - Unique ID 4
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30724 (0x7804) - Unique ID 5
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30725 (0x7805) - Unique ID 6
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30726 (0x7806) - Unique ID 7
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30727 (0x7807) - Unique ID 8
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30728 (0x7808) - Factory OTP ID
+ */
+#define WM831X_OTP_FACT_ID_MASK                 0xFFFE  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_ID_SHIFT                     1  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_ID_WIDTH                    15  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_FINAL                   0x0001  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_MASK              0x0001  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_SHIFT                  0  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_WIDTH                  1  /* OTP_FACT_FINAL */
+
+/*
+ * R30729 (0x7809) - Factory OTP 1
+ */
+#define WM831X_DC3_TRIM_MASK                    0xF000  /* DC3_TRIM - [15:12] */
+#define WM831X_DC3_TRIM_SHIFT                       12  /* DC3_TRIM - [15:12] */
+#define WM831X_DC3_TRIM_WIDTH                        4  /* DC3_TRIM - [15:12] */
+#define WM831X_DC2_TRIM_MASK                    0x0FC0  /* DC2_TRIM - [11:6] */
+#define WM831X_DC2_TRIM_SHIFT                        6  /* DC2_TRIM - [11:6] */
+#define WM831X_DC2_TRIM_WIDTH                        6  /* DC2_TRIM - [11:6] */
+#define WM831X_DC1_TRIM_MASK                    0x003F  /* DC1_TRIM - [5:0] */
+#define WM831X_DC1_TRIM_SHIFT                        0  /* DC1_TRIM - [5:0] */
+#define WM831X_DC1_TRIM_WIDTH                        6  /* DC1_TRIM - [5:0] */
+
+/*
+ * R30730 (0x780A) - Factory OTP 2
+ */
+#define WM831X_CHIP_ID_MASK                     0xFFFF  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_SHIFT                         0  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_WIDTH                        16  /* CHIP_ID - [15:0] */
+
+/*
+ * R30731 (0x780B) - Factory OTP 3
+ */
+#define WM831X_OSC_TRIM_MASK                    0x0780  /* OSC_TRIM - [10:7] */
+#define WM831X_OSC_TRIM_SHIFT                        7  /* OSC_TRIM - [10:7] */
+#define WM831X_OSC_TRIM_WIDTH                        4  /* OSC_TRIM - [10:7] */
+#define WM831X_BG_TRIM_MASK                     0x0078  /* BG_TRIM - [6:3] */
+#define WM831X_BG_TRIM_SHIFT                         3  /* BG_TRIM - [6:3] */
+#define WM831X_BG_TRIM_WIDTH                         4  /* BG_TRIM - [6:3] */
+#define WM831X_LPBG_TRIM_MASK                   0x0007  /* LPBG_TRIM - [2:0] */
+#define WM831X_LPBG_TRIM_SHIFT                       0  /* LPBG_TRIM - [2:0] */
+#define WM831X_LPBG_TRIM_WIDTH                       3  /* LPBG_TRIM - [2:0] */
+
+/*
+ * R30732 (0x780C) - Factory OTP 4
+ */
+#define WM831X_CHILD_I2C_ADDR_MASK              0x00FE  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CHILD_I2C_ADDR_SHIFT                  1  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CHILD_I2C_ADDR_WIDTH                  7  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CH_AW                            0x0001  /* CH_AW */
+#define WM831X_CH_AW_MASK                       0x0001  /* CH_AW */
+#define WM831X_CH_AW_SHIFT                           0  /* CH_AW */
+#define WM831X_CH_AW_WIDTH                           1  /* CH_AW */
+
+/*
+ * R30733 (0x780D) - Factory OTP 5
+ */
+#define WM831X_CHARGE_TRIM_MASK                 0x003F  /* CHARGE_TRIM - [5:0] */
+#define WM831X_CHARGE_TRIM_SHIFT                     0  /* CHARGE_TRIM - [5:0] */
+#define WM831X_CHARGE_TRIM_WIDTH                     6  /* CHARGE_TRIM - [5:0] */
+
+/*
+ * R30736 (0x7810) - Customer OTP ID
+ */
+#define WM831X_OTP_AUTO_PROG                    0x8000  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_MASK               0x8000  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_SHIFT                  15  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_WIDTH                   1  /* OTP_AUTO_PROG */
+#define WM831X_OTP_CUST_ID_MASK                 0x7FFE  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_ID_SHIFT                     1  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_ID_WIDTH                    14  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_FINAL                   0x0001  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_MASK              0x0001  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_SHIFT                  0  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_WIDTH                  1  /* OTP_CUST_FINAL */
+
+/*
+ * R30759 (0x7827) - DBE CHECK DATA
+ */
+#define WM831X_DBE_VALID_DATA_MASK              0xFFFF  /* DBE_VALID_DATA - [15:0] */
+#define WM831X_DBE_VALID_DATA_SHIFT                  0  /* DBE_VALID_DATA - [15:0] */
+#define WM831X_DBE_VALID_DATA_WIDTH                 16  /* DBE_VALID_DATA - [15:0] */
+
+
+#endif
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
new file mode 100644
index 00000000000..90d820260aa
--- /dev/null
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -0,0 +1,113 @@
+/*
+ * include/linux/mfd/wm831x/pdata.h -- Platform data for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_PDATA_H__
+#define __MFD_WM831X_PDATA_H__
+
+struct wm831x;
+struct regulator_init_data;
+
+struct wm831x_backlight_pdata {
+	int isink;     /** ISINK to use, 1 or 2 */
+	int max_uA;    /** Maximum current to allow */
+};
+
+struct wm831x_backup_pdata {
+	int charger_enable;
+	int no_constant_voltage;  /** Disable constant voltage charging */
+	int vlim;   /** Voltage limit in milivolts */
+	int ilim;   /** Current limit in microamps */
+};
+
+struct wm831x_battery_pdata {
+	int enable;         /** Enable charging */
+	int fast_enable;    /** Enable fast charging */
+	int off_mask;       /** Mask OFF while charging */
+	int trickle_ilim;   /** Trickle charge current limit, in mA */
+	int vsel;           /** Target voltage, in mV */
+	int eoc_iterm;      /** End of trickle charge current, in mA */
+	int fast_ilim;      /** Fast charge current limit, in mA */
+	int timeout;        /** Charge cycle timeout, in minutes */
+};
+
+/* Sources for status LED configuration.  Values are register values
+ * plus 1 to allow for a zero default for preserve.
+ */
+enum wm831x_status_src {
+	WM831X_STATUS_PRESERVE = 0,  /* Keep the current hardware setting */
+	WM831X_STATUS_OTP = 1,
+	WM831X_STATUS_POWER = 2,
+	WM831X_STATUS_CHARGER = 3,
+	WM831X_STATUS_MANUAL = 4,
+};
+
+struct wm831x_status_pdata {
+	enum wm831x_status_src default_src;
+	const char *name;
+	const char *default_trigger;
+};
+
+struct wm831x_touch_pdata {
+	int fivewire;          /** 1 for five wire mode, 0 for 4 wire */
+	int isel;              /** Current for pen down (uA) */
+	int rpu;               /** Pen down sensitivity resistor divider */
+	int pressure;          /** Report pressure (boolean) */
+	int data_irq;          /** Touch data ready IRQ */
+};
+
+enum wm831x_watchdog_action {
+	WM831X_WDOG_NONE = 0,
+	WM831X_WDOG_INTERRUPT = 1,
+	WM831X_WDOG_RESET = 2,
+	WM831X_WDOG_WAKE = 3,
+};
+
+struct wm831x_watchdog_pdata {
+	enum wm831x_watchdog_action primary, secondary;
+	int update_gpio;
+	unsigned int software:1;
+};
+
+#define WM831X_MAX_STATUS 2
+#define WM831X_MAX_DCDC   4
+#define WM831X_MAX_EPE    2
+#define WM831X_MAX_LDO    11
+#define WM831X_MAX_ISINK  2
+
+struct wm831x_pdata {
+	/** Called before subdevices are set up */
+	int (*pre_init)(struct wm831x *wm831x);
+	/** Called after subdevices are set up */
+	int (*post_init)(struct wm831x *wm831x);
+
+	int gpio_base;
+	struct wm831x_backlight_pdata *backlight;
+	struct wm831x_backup_pdata *backup;
+	struct wm831x_battery_pdata *battery;
+	struct wm831x_touch_pdata *touch;
+	struct wm831x_watchdog_pdata *watchdog;
+
+	/** LED1 = 0 and so on */
+	struct wm831x_status_pdata *status[WM831X_MAX_STATUS];
+	/** DCDC1 = 0 and so on */
+	struct regulator_init_data *dcdc[WM831X_MAX_DCDC];
+	/** EPE1 = 0 and so on */
+	struct regulator_init_data *epe[WM831X_MAX_EPE];
+	/** LDO1 = 0 and so on */
+	struct regulator_init_data *ldo[WM831X_MAX_LDO];
+	/** ISINK1 = 0 and so on*/
+	struct regulator_init_data *isink[WM831X_MAX_ISINK];
+};
+
+#endif
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
new file mode 100644
index 00000000000..f95466343fb
--- /dev/null
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -0,0 +1,1218 @@
+/*
+ * linux/mfd/wm831x/regulator.h -- Regulator definitons for wm831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_REGULATOR_H__
+#define __MFD_WM831X_REGULATOR_H__
+
+/*
+ * R16462 (0x404E) - Current Sink 1
+ */
+#define WM831X_CS1_ENA                          0x8000  /* CS1_ENA */
+#define WM831X_CS1_ENA_MASK                     0x8000  /* CS1_ENA */
+#define WM831X_CS1_ENA_SHIFT                        15  /* CS1_ENA */
+#define WM831X_CS1_ENA_WIDTH                         1  /* CS1_ENA */
+#define WM831X_CS1_DRIVE                        0x4000  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_MASK                   0x4000  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_SHIFT                      14  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_WIDTH                       1  /* CS1_DRIVE */
+#define WM831X_CS1_SLPENA                       0x1000  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_MASK                  0x1000  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_SHIFT                     12  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_WIDTH                      1  /* CS1_SLPENA */
+#define WM831X_CS1_OFF_RAMP_MASK                0x0C00  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_SHIFT                   10  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_WIDTH                    2  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_ON_RAMP_MASK                 0x0300  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_SHIFT                     8  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_WIDTH                     2  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ISEL_MASK                    0x003F  /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_SHIFT                        0  /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_WIDTH                        6  /* CS1_ISEL - [5:0] */
+
+/*
+ * R16463 (0x404F) - Current Sink 2
+ */
+#define WM831X_CS2_ENA                          0x8000  /* CS2_ENA */
+#define WM831X_CS2_ENA_MASK                     0x8000  /* CS2_ENA */
+#define WM831X_CS2_ENA_SHIFT                        15  /* CS2_ENA */
+#define WM831X_CS2_ENA_WIDTH                         1  /* CS2_ENA */
+#define WM831X_CS2_DRIVE                        0x4000  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_MASK                   0x4000  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_SHIFT                      14  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_WIDTH                       1  /* CS2_DRIVE */
+#define WM831X_CS2_SLPENA                       0x1000  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_MASK                  0x1000  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_SHIFT                     12  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_WIDTH                      1  /* CS2_SLPENA */
+#define WM831X_CS2_OFF_RAMP_MASK                0x0C00  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_SHIFT                   10  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_WIDTH                    2  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_ON_RAMP_MASK                 0x0300  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_SHIFT                     8  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_WIDTH                     2  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ISEL_MASK                    0x003F  /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_SHIFT                        0  /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_WIDTH                        6  /* CS2_ISEL - [5:0] */
+
+/*
+ * R16464 (0x4050) - DCDC Enable
+ */
+#define WM831X_EPE2_ENA                         0x0080  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_MASK                    0x0080  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_SHIFT                        7  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_WIDTH                        1  /* EPE2_ENA */
+#define WM831X_EPE1_ENA                         0x0040  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_MASK                    0x0040  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_SHIFT                        6  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_WIDTH                        1  /* EPE1_ENA */
+#define WM831X_DC4_ENA                          0x0008  /* DC4_ENA */
+#define WM831X_DC4_ENA_MASK                     0x0008  /* DC4_ENA */
+#define WM831X_DC4_ENA_SHIFT                         3  /* DC4_ENA */
+#define WM831X_DC4_ENA_WIDTH                         1  /* DC4_ENA */
+#define WM831X_DC3_ENA                          0x0004  /* DC3_ENA */
+#define WM831X_DC3_ENA_MASK                     0x0004  /* DC3_ENA */
+#define WM831X_DC3_ENA_SHIFT                         2  /* DC3_ENA */
+#define WM831X_DC3_ENA_WIDTH                         1  /* DC3_ENA */
+#define WM831X_DC2_ENA                          0x0002  /* DC2_ENA */
+#define WM831X_DC2_ENA_MASK                     0x0002  /* DC2_ENA */
+#define WM831X_DC2_ENA_SHIFT                         1  /* DC2_ENA */
+#define WM831X_DC2_ENA_WIDTH                         1  /* DC2_ENA */
+#define WM831X_DC1_ENA                          0x0001  /* DC1_ENA */
+#define WM831X_DC1_ENA_MASK                     0x0001  /* DC1_ENA */
+#define WM831X_DC1_ENA_SHIFT                         0  /* DC1_ENA */
+#define WM831X_DC1_ENA_WIDTH                         1  /* DC1_ENA */
+
+/*
+ * R16465 (0x4051) - LDO Enable
+ */
+#define WM831X_LDO11_ENA                        0x0400  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_MASK                   0x0400  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_SHIFT                      10  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_WIDTH                       1  /* LDO11_ENA */
+#define WM831X_LDO10_ENA                        0x0200  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_MASK                   0x0200  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_SHIFT                       9  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_WIDTH                       1  /* LDO10_ENA */
+#define WM831X_LDO9_ENA                         0x0100  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_MASK                    0x0100  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_SHIFT                        8  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_WIDTH                        1  /* LDO9_ENA */
+#define WM831X_LDO8_ENA                         0x0080  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_MASK                    0x0080  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_SHIFT                        7  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_WIDTH                        1  /* LDO8_ENA */
+#define WM831X_LDO7_ENA                         0x0040  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_MASK                    0x0040  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_SHIFT                        6  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_WIDTH                        1  /* LDO7_ENA */
+#define WM831X_LDO6_ENA                         0x0020  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_MASK                    0x0020  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_SHIFT                        5  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_WIDTH                        1  /* LDO6_ENA */
+#define WM831X_LDO5_ENA                         0x0010  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_MASK                    0x0010  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_SHIFT                        4  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_WIDTH                        1  /* LDO5_ENA */
+#define WM831X_LDO4_ENA                         0x0008  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_MASK                    0x0008  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_SHIFT                        3  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_WIDTH                        1  /* LDO4_ENA */
+#define WM831X_LDO3_ENA                         0x0004  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_MASK                    0x0004  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_SHIFT                        2  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_WIDTH                        1  /* LDO3_ENA */
+#define WM831X_LDO2_ENA                         0x0002  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_MASK                    0x0002  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_SHIFT                        1  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_WIDTH                        1  /* LDO2_ENA */
+#define WM831X_LDO1_ENA                         0x0001  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_MASK                    0x0001  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_SHIFT                        0  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
+
+/*
+ * R16466 (0x4052) - DCDC Status
+ */
+#define WM831X_EPE2_STS                         0x0080  /* EPE2_STS */
+#define WM831X_EPE2_STS_MASK                    0x0080  /* EPE2_STS */
+#define WM831X_EPE2_STS_SHIFT                        7  /* EPE2_STS */
+#define WM831X_EPE2_STS_WIDTH                        1  /* EPE2_STS */
+#define WM831X_EPE1_STS                         0x0040  /* EPE1_STS */
+#define WM831X_EPE1_STS_MASK                    0x0040  /* EPE1_STS */
+#define WM831X_EPE1_STS_SHIFT                        6  /* EPE1_STS */
+#define WM831X_EPE1_STS_WIDTH                        1  /* EPE1_STS */
+#define WM831X_DC4_STS                          0x0008  /* DC4_STS */
+#define WM831X_DC4_STS_MASK                     0x0008  /* DC4_STS */
+#define WM831X_DC4_STS_SHIFT                         3  /* DC4_STS */
+#define WM831X_DC4_STS_WIDTH                         1  /* DC4_STS */
+#define WM831X_DC3_STS                          0x0004  /* DC3_STS */
+#define WM831X_DC3_STS_MASK                     0x0004  /* DC3_STS */
+#define WM831X_DC3_STS_SHIFT                         2  /* DC3_STS */
+#define WM831X_DC3_STS_WIDTH                         1  /* DC3_STS */
+#define WM831X_DC2_STS                          0x0002  /* DC2_STS */
+#define WM831X_DC2_STS_MASK                     0x0002  /* DC2_STS */
+#define WM831X_DC2_STS_SHIFT                         1  /* DC2_STS */
+#define WM831X_DC2_STS_WIDTH                         1  /* DC2_STS */
+#define WM831X_DC1_STS                          0x0001  /* DC1_STS */
+#define WM831X_DC1_STS_MASK                     0x0001  /* DC1_STS */
+#define WM831X_DC1_STS_SHIFT                         0  /* DC1_STS */
+#define WM831X_DC1_STS_WIDTH                         1  /* DC1_STS */
+
+/*
+ * R16467 (0x4053) - LDO Status
+ */
+#define WM831X_LDO11_STS                        0x0400  /* LDO11_STS */
+#define WM831X_LDO11_STS_MASK                   0x0400  /* LDO11_STS */
+#define WM831X_LDO11_STS_SHIFT                      10  /* LDO11_STS */
+#define WM831X_LDO11_STS_WIDTH                       1  /* LDO11_STS */
+#define WM831X_LDO10_STS                        0x0200  /* LDO10_STS */
+#define WM831X_LDO10_STS_MASK                   0x0200  /* LDO10_STS */
+#define WM831X_LDO10_STS_SHIFT                       9  /* LDO10_STS */
+#define WM831X_LDO10_STS_WIDTH                       1  /* LDO10_STS */
+#define WM831X_LDO9_STS                         0x0100  /* LDO9_STS */
+#define WM831X_LDO9_STS_MASK                    0x0100  /* LDO9_STS */
+#define WM831X_LDO9_STS_SHIFT                        8  /* LDO9_STS */
+#define WM831X_LDO9_STS_WIDTH                        1  /* LDO9_STS */
+#define WM831X_LDO8_STS                         0x0080  /* LDO8_STS */
+#define WM831X_LDO8_STS_MASK                    0x0080  /* LDO8_STS */
+#define WM831X_LDO8_STS_SHIFT                        7  /* LDO8_STS */
+#define WM831X_LDO8_STS_WIDTH                        1  /* LDO8_STS */
+#define WM831X_LDO7_STS                         0x0040  /* LDO7_STS */
+#define WM831X_LDO7_STS_MASK                    0x0040  /* LDO7_STS */
+#define WM831X_LDO7_STS_SHIFT                        6  /* LDO7_STS */
+#define WM831X_LDO7_STS_WIDTH                        1  /* LDO7_STS */
+#define WM831X_LDO6_STS                         0x0020  /* LDO6_STS */
+#define WM831X_LDO6_STS_MASK                    0x0020  /* LDO6_STS */
+#define WM831X_LDO6_STS_SHIFT                        5  /* LDO6_STS */
+#define WM831X_LDO6_STS_WIDTH                        1  /* LDO6_STS */
+#define WM831X_LDO5_STS                         0x0010  /* LDO5_STS */
+#define WM831X_LDO5_STS_MASK                    0x0010  /* LDO5_STS */
+#define WM831X_LDO5_STS_SHIFT                        4  /* LDO5_STS */
+#define WM831X_LDO5_STS_WIDTH                        1  /* LDO5_STS */
+#define WM831X_LDO4_STS                         0x0008  /* LDO4_STS */
+#define WM831X_LDO4_STS_MASK                    0x0008  /* LDO4_STS */
+#define WM831X_LDO4_STS_SHIFT                        3  /* LDO4_STS */
+#define WM831X_LDO4_STS_WIDTH                        1  /* LDO4_STS */
+#define WM831X_LDO3_STS                         0x0004  /* LDO3_STS */
+#define WM831X_LDO3_STS_MASK                    0x0004  /* LDO3_STS */
+#define WM831X_LDO3_STS_SHIFT                        2  /* LDO3_STS */
+#define WM831X_LDO3_STS_WIDTH                        1  /* LDO3_STS */
+#define WM831X_LDO2_STS                         0x0002  /* LDO2_STS */
+#define WM831X_LDO2_STS_MASK                    0x0002  /* LDO2_STS */
+#define WM831X_LDO2_STS_SHIFT                        1  /* LDO2_STS */
+#define WM831X_LDO2_STS_WIDTH                        1  /* LDO2_STS */
+#define WM831X_LDO1_STS                         0x0001  /* LDO1_STS */
+#define WM831X_LDO1_STS_MASK                    0x0001  /* LDO1_STS */
+#define WM831X_LDO1_STS_SHIFT                        0  /* LDO1_STS */
+#define WM831X_LDO1_STS_WIDTH                        1  /* LDO1_STS */
+
+/*
+ * R16468 (0x4054) - DCDC UV Status
+ */
+#define WM831X_DC2_OV_STS                       0x2000  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_MASK                  0x2000  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_SHIFT                     13  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_WIDTH                      1  /* DC2_OV_STS */
+#define WM831X_DC1_OV_STS                       0x1000  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_MASK                  0x1000  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_SHIFT                     12  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_WIDTH                      1  /* DC1_OV_STS */
+#define WM831X_DC2_HC_STS                       0x0200  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_MASK                  0x0200  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_SHIFT                      9  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_WIDTH                      1  /* DC2_HC_STS */
+#define WM831X_DC1_HC_STS                       0x0100  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_MASK                  0x0100  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_SHIFT                      8  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_WIDTH                      1  /* DC1_HC_STS */
+#define WM831X_DC4_UV_STS                       0x0008  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_MASK                  0x0008  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_SHIFT                      3  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_WIDTH                      1  /* DC4_UV_STS */
+#define WM831X_DC3_UV_STS                       0x0004  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_MASK                  0x0004  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_SHIFT                      2  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_WIDTH                      1  /* DC3_UV_STS */
+#define WM831X_DC2_UV_STS                       0x0002  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_MASK                  0x0002  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_SHIFT                      1  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_WIDTH                      1  /* DC2_UV_STS */
+#define WM831X_DC1_UV_STS                       0x0001  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_MASK                  0x0001  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_SHIFT                      0  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_WIDTH                      1  /* DC1_UV_STS */
+
+/*
+ * R16469 (0x4055) - LDO UV Status
+ */
+#define WM831X_INTLDO_UV_STS                    0x8000  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_MASK               0x8000  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_SHIFT                  15  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_WIDTH                   1  /* INTLDO_UV_STS */
+#define WM831X_LDO10_UV_STS                     0x0200  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_MASK                0x0200  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_SHIFT                    9  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_WIDTH                    1  /* LDO10_UV_STS */
+#define WM831X_LDO9_UV_STS                      0x0100  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_MASK                 0x0100  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_SHIFT                     8  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_WIDTH                     1  /* LDO9_UV_STS */
+#define WM831X_LDO8_UV_STS                      0x0080  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_MASK                 0x0080  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_SHIFT                     7  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_WIDTH                     1  /* LDO8_UV_STS */
+#define WM831X_LDO7_UV_STS                      0x0040  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_MASK                 0x0040  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_SHIFT                     6  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_WIDTH                     1  /* LDO7_UV_STS */
+#define WM831X_LDO6_UV_STS                      0x0020  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_MASK                 0x0020  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_SHIFT                     5  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_WIDTH                     1  /* LDO6_UV_STS */
+#define WM831X_LDO5_UV_STS                      0x0010  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_MASK                 0x0010  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_SHIFT                     4  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_WIDTH                     1  /* LDO5_UV_STS */
+#define WM831X_LDO4_UV_STS                      0x0008  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_MASK                 0x0008  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_SHIFT                     3  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_WIDTH                     1  /* LDO4_UV_STS */
+#define WM831X_LDO3_UV_STS                      0x0004  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_MASK                 0x0004  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_SHIFT                     2  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_WIDTH                     1  /* LDO3_UV_STS */
+#define WM831X_LDO2_UV_STS                      0x0002  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_MASK                 0x0002  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_SHIFT                     1  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_WIDTH                     1  /* LDO2_UV_STS */
+#define WM831X_LDO1_UV_STS                      0x0001  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_MASK                 0x0001  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_SHIFT                     0  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_WIDTH                     1  /* LDO1_UV_STS */
+
+/*
+ * R16470 (0x4056) - DC1 Control 1
+ */
+#define WM831X_DC1_RATE_MASK                    0xC000  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_SHIFT                       14  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_WIDTH                        2  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_PHASE                        0x1000  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_MASK                   0x1000  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_SHIFT                      12  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_WIDTH                       1  /* DC1_PHASE */
+#define WM831X_DC1_FREQ_MASK                    0x0300  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_SHIFT                        8  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_WIDTH                        2  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FLT                          0x0080  /* DC1_FLT */
+#define WM831X_DC1_FLT_MASK                     0x0080  /* DC1_FLT */
+#define WM831X_DC1_FLT_SHIFT                         7  /* DC1_FLT */
+#define WM831X_DC1_FLT_WIDTH                         1  /* DC1_FLT */
+#define WM831X_DC1_SOFT_START_MASK              0x0030  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_SHIFT                  4  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_WIDTH                  2  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_CAP_MASK                     0x0003  /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_SHIFT                         0  /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_WIDTH                         2  /* DC1_CAP - [1:0] */
+
+/*
+ * R16471 (0x4057) - DC1 Control 2
+ */
+#define WM831X_DC1_ERR_ACT_MASK                 0xC000  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_SHIFT                    14  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_WIDTH                     2  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_HWC_SRC_MASK                 0x1800  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_SHIFT                    11  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_WIDTH                     2  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_VSEL                     0x0400  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_MASK                0x0400  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_SHIFT                   10  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_WIDTH                    1  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_MODE_MASK                0x0300  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_SHIFT                    8  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_WIDTH                    2  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HC_THR_MASK                  0x0070  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_SHIFT                      4  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_WIDTH                      3  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_IND_ENA                   0x0001  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_MASK              0x0001  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_SHIFT                  0  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_WIDTH                  1  /* DC1_HC_IND_ENA */
+
+/*
+ * R16472 (0x4058) - DC1 ON Config
+ */
+#define WM831X_DC1_ON_SLOT_MASK                 0xE000  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_SHIFT                    13  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_WIDTH                     3  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_MODE_MASK                 0x0300  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_SHIFT                     8  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_WIDTH                     2  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_VSEL_MASK                 0x007F  /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_SHIFT                     0  /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_WIDTH                     7  /* DC1_ON_VSEL - [6:0] */
+
+/*
+ * R16473 (0x4059) - DC1 SLEEP Control
+ */
+#define WM831X_DC1_SLP_SLOT_MASK                0xE000  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_SHIFT                   13  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_WIDTH                    3  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_MODE_MASK                0x0300  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_SHIFT                    8  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_WIDTH                    2  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_VSEL_MASK                0x007F  /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_SHIFT                    0  /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_WIDTH                    7  /* DC1_SLP_VSEL - [6:0] */
+
+/*
+ * R16474 (0x405A) - DC1 DVS Control
+ */
+#define WM831X_DC1_DVS_SRC_MASK                 0x1800  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_SHIFT                    11  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_WIDTH                     2  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_VSEL_MASK                0x007F  /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_SHIFT                    0  /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_WIDTH                    7  /* DC1_DVS_VSEL - [6:0] */
+
+/*
+ * R16475 (0x405B) - DC2 Control 1
+ */
+#define WM831X_DC2_RATE_MASK                    0xC000  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_SHIFT                       14  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_WIDTH                        2  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_PHASE                        0x1000  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_MASK                   0x1000  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_SHIFT                      12  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_WIDTH                       1  /* DC2_PHASE */
+#define WM831X_DC2_FREQ_MASK                    0x0300  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_SHIFT                        8  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_WIDTH                        2  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FLT                          0x0080  /* DC2_FLT */
+#define WM831X_DC2_FLT_MASK                     0x0080  /* DC2_FLT */
+#define WM831X_DC2_FLT_SHIFT                         7  /* DC2_FLT */
+#define WM831X_DC2_FLT_WIDTH                         1  /* DC2_FLT */
+#define WM831X_DC2_SOFT_START_MASK              0x0030  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_SHIFT                  4  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_WIDTH                  2  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_CAP_MASK                     0x0003  /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_SHIFT                         0  /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_WIDTH                         2  /* DC2_CAP - [1:0] */
+
+/*
+ * R16476 (0x405C) - DC2 Control 2
+ */
+#define WM831X_DC2_ERR_ACT_MASK                 0xC000  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_SHIFT                    14  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_WIDTH                     2  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_HWC_SRC_MASK                 0x1800  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_SHIFT                    11  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_WIDTH                     2  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_VSEL                     0x0400  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_MASK                0x0400  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_SHIFT                   10  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_WIDTH                    1  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_MODE_MASK                0x0300  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_SHIFT                    8  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_WIDTH                    2  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HC_THR_MASK                  0x0070  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_SHIFT                      4  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_WIDTH                      3  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_IND_ENA                   0x0001  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_MASK              0x0001  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_SHIFT                  0  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_WIDTH                  1  /* DC2_HC_IND_ENA */
+
+/*
+ * R16477 (0x405D) - DC2 ON Config
+ */
+#define WM831X_DC2_ON_SLOT_MASK                 0xE000  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_SHIFT                    13  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_WIDTH                     3  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_MODE_MASK                 0x0300  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_SHIFT                     8  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_WIDTH                     2  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_VSEL_MASK                 0x007F  /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_SHIFT                     0  /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_WIDTH                     7  /* DC2_ON_VSEL - [6:0] */
+
+/*
+ * R16478 (0x405E) - DC2 SLEEP Control
+ */
+#define WM831X_DC2_SLP_SLOT_MASK                0xE000  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_SHIFT                   13  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_WIDTH                    3  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_MODE_MASK                0x0300  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_SHIFT                    8  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_WIDTH                    2  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_VSEL_MASK                0x007F  /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_SHIFT                    0  /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_WIDTH                    7  /* DC2_SLP_VSEL - [6:0] */
+
+/*
+ * R16479 (0x405F) - DC2 DVS Control
+ */
+#define WM831X_DC2_DVS_SRC_MASK                 0x1800  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_SHIFT                    11  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_WIDTH                     2  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_VSEL_MASK                0x007F  /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_SHIFT                    0  /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_WIDTH                    7  /* DC2_DVS_VSEL - [6:0] */
+
+/*
+ * R16480 (0x4060) - DC3 Control 1
+ */
+#define WM831X_DC3_PHASE                        0x1000  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_MASK                   0x1000  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_SHIFT                      12  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_WIDTH                       1  /* DC3_PHASE */
+#define WM831X_DC3_FLT                          0x0080  /* DC3_FLT */
+#define WM831X_DC3_FLT_MASK                     0x0080  /* DC3_FLT */
+#define WM831X_DC3_FLT_SHIFT                         7  /* DC3_FLT */
+#define WM831X_DC3_FLT_WIDTH                         1  /* DC3_FLT */
+#define WM831X_DC3_SOFT_START_MASK              0x0030  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_SHIFT                  4  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_WIDTH                  2  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_STNBY_LIM_MASK               0x000C  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_SHIFT                   2  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_WIDTH                   2  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_CAP_MASK                     0x0003  /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_SHIFT                         0  /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_WIDTH                         2  /* DC3_CAP - [1:0] */
+
+/*
+ * R16481 (0x4061) - DC3 Control 2
+ */
+#define WM831X_DC3_ERR_ACT_MASK                 0xC000  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_SHIFT                    14  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_WIDTH                     2  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_HWC_SRC_MASK                 0x1800  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_SHIFT                    11  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_WIDTH                     2  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_VSEL                     0x0400  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_MASK                0x0400  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_SHIFT                   10  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_WIDTH                    1  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_MODE_MASK                0x0300  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_SHIFT                    8  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_WIDTH                    2  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_OVP                          0x0080  /* DC3_OVP */
+#define WM831X_DC3_OVP_MASK                     0x0080  /* DC3_OVP */
+#define WM831X_DC3_OVP_SHIFT                         7  /* DC3_OVP */
+#define WM831X_DC3_OVP_WIDTH                         1  /* DC3_OVP */
+
+/*
+ * R16482 (0x4062) - DC3 ON Config
+ */
+#define WM831X_DC3_ON_SLOT_MASK                 0xE000  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_SHIFT                    13  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_WIDTH                     3  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_MODE_MASK                 0x0300  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_SHIFT                     8  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_WIDTH                     2  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_VSEL_MASK                 0x007F  /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_SHIFT                     0  /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_WIDTH                     7  /* DC3_ON_VSEL - [6:0] */
+
+/*
+ * R16483 (0x4063) - DC3 SLEEP Control
+ */
+#define WM831X_DC3_SLP_SLOT_MASK                0xE000  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_SHIFT                   13  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_WIDTH                    3  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_MODE_MASK                0x0300  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_SHIFT                    8  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_WIDTH                    2  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_VSEL_MASK                0x007F  /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_SHIFT                    0  /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_WIDTH                    7  /* DC3_SLP_VSEL - [6:0] */
+
+/*
+ * R16484 (0x4064) - DC4 Control
+ */
+#define WM831X_DC4_ERR_ACT_MASK                 0xC000  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_SHIFT                    14  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_WIDTH                     2  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_HWC_SRC_MASK                 0x1800  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_SHIFT                    11  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_WIDTH                     2  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_MODE                     0x0100  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_MASK                0x0100  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_SHIFT                    8  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_WIDTH                    1  /* DC4_HWC_MODE */
+#define WM831X_DC4_RANGE_MASK                   0x000C  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_SHIFT                       2  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_WIDTH                       2  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_FBSRC                        0x0001  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_MASK                   0x0001  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_SHIFT                       0  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_WIDTH                       1  /* DC4_FBSRC */
+
+/*
+ * R16485 (0x4065) - DC4 SLEEP Control
+ */
+#define WM831X_DC4_SLPENA                       0x0100  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_MASK                  0x0100  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_SHIFT                      8  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_WIDTH                      1  /* DC4_SLPENA */
+
+/*
+ * R16488 (0x4068) - LDO1 Control
+ */
+#define WM831X_LDO1_ERR_ACT_MASK                0xC000  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_SHIFT                   14  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_WIDTH                    2  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_HWC_SRC_MASK                0x1800  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_SHIFT                   11  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_WIDTH                    2  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_VSEL                    0x0400  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_MASK               0x0400  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_SHIFT                  10  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_WIDTH                   1  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_MODE_MASK               0x0300  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_SHIFT                   8  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_WIDTH                   2  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_FLT                         0x0080  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_MASK                    0x0080  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_SHIFT                        7  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_WIDTH                        1  /* LDO1_FLT */
+#define WM831X_LDO1_SWI                         0x0040  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_MASK                    0x0040  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_SHIFT                        6  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_WIDTH                        1  /* LDO1_SWI */
+#define WM831X_LDO1_LP_MODE                     0x0001  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_MASK                0x0001  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_SHIFT                    0  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_WIDTH                    1  /* LDO1_LP_MODE */
+
+/*
+ * R16489 (0x4069) - LDO1 ON Control
+ */
+#define WM831X_LDO1_ON_SLOT_MASK                0xE000  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_SHIFT                   13  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_WIDTH                    3  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_MODE                     0x0100  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_MASK                0x0100  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_SHIFT                    8  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_WIDTH                    1  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_VSEL_MASK                0x001F  /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_SHIFT                    0  /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_WIDTH                    5  /* LDO1_ON_VSEL - [4:0] */
+
+/*
+ * R16490 (0x406A) - LDO1 SLEEP Control
+ */
+#define WM831X_LDO1_SLP_SLOT_MASK               0xE000  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_SHIFT                  13  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_WIDTH                   3  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_MODE                    0x0100  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_MASK               0x0100  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_SHIFT                   8  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_WIDTH                   1  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_VSEL_MASK               0x001F  /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_SHIFT                   0  /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_WIDTH                   5  /* LDO1_SLP_VSEL - [4:0] */
+
+/*
+ * R16491 (0x406B) - LDO2 Control
+ */
+#define WM831X_LDO2_ERR_ACT_MASK                0xC000  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_SHIFT                   14  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_WIDTH                    2  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_HWC_SRC_MASK                0x1800  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_SHIFT                   11  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_WIDTH                    2  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_VSEL                    0x0400  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_MASK               0x0400  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_SHIFT                  10  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_WIDTH                   1  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_MODE_MASK               0x0300  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_SHIFT                   8  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_WIDTH                   2  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_FLT                         0x0080  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_MASK                    0x0080  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_SHIFT                        7  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_WIDTH                        1  /* LDO2_FLT */
+#define WM831X_LDO2_SWI                         0x0040  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_MASK                    0x0040  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_SHIFT                        6  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_WIDTH                        1  /* LDO2_SWI */
+#define WM831X_LDO2_LP_MODE                     0x0001  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_MASK                0x0001  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_SHIFT                    0  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_WIDTH                    1  /* LDO2_LP_MODE */
+
+/*
+ * R16492 (0x406C) - LDO2 ON Control
+ */
+#define WM831X_LDO2_ON_SLOT_MASK                0xE000  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_SHIFT                   13  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_WIDTH                    3  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_MODE                     0x0100  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_MASK                0x0100  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_SHIFT                    8  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_WIDTH                    1  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_VSEL_MASK                0x001F  /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_SHIFT                    0  /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_WIDTH                    5  /* LDO2_ON_VSEL - [4:0] */
+
+/*
+ * R16493 (0x406D) - LDO2 SLEEP Control
+ */
+#define WM831X_LDO2_SLP_SLOT_MASK               0xE000  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_SHIFT                  13  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_WIDTH                   3  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_MODE                    0x0100  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_MASK               0x0100  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_SHIFT                   8  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_WIDTH                   1  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_VSEL_MASK               0x001F  /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_SHIFT                   0  /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_WIDTH                   5  /* LDO2_SLP_VSEL - [4:0] */
+
+/*
+ * R16494 (0x406E) - LDO3 Control
+ */
+#define WM831X_LDO3_ERR_ACT_MASK                0xC000  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_SHIFT                   14  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_WIDTH                    2  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_HWC_SRC_MASK                0x1800  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_SHIFT                   11  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_WIDTH                    2  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_VSEL                    0x0400  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_MASK               0x0400  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_SHIFT                  10  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_WIDTH                   1  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_MODE_MASK               0x0300  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_SHIFT                   8  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_WIDTH                   2  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_FLT                         0x0080  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_MASK                    0x0080  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_SHIFT                        7  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_WIDTH                        1  /* LDO3_FLT */
+#define WM831X_LDO3_SWI                         0x0040  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_MASK                    0x0040  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_SHIFT                        6  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_WIDTH                        1  /* LDO3_SWI */
+#define WM831X_LDO3_LP_MODE                     0x0001  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_MASK                0x0001  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_SHIFT                    0  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_WIDTH                    1  /* LDO3_LP_MODE */
+
+/*
+ * R16495 (0x406F) - LDO3 ON Control
+ */
+#define WM831X_LDO3_ON_SLOT_MASK                0xE000  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_SHIFT                   13  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_WIDTH                    3  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_MODE                     0x0100  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_MASK                0x0100  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_SHIFT                    8  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_WIDTH                    1  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_VSEL_MASK                0x001F  /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_SHIFT                    0  /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_WIDTH                    5  /* LDO3_ON_VSEL - [4:0] */
+
+/*
+ * R16496 (0x4070) - LDO3 SLEEP Control
+ */
+#define WM831X_LDO3_SLP_SLOT_MASK               0xE000  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_SHIFT                  13  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_WIDTH                   3  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_MODE                    0x0100  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_MASK               0x0100  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_SHIFT                   8  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_WIDTH                   1  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_VSEL_MASK               0x001F  /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_SHIFT                   0  /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_WIDTH                   5  /* LDO3_SLP_VSEL - [4:0] */
+
+/*
+ * R16497 (0x4071) - LDO4 Control
+ */
+#define WM831X_LDO4_ERR_ACT_MASK                0xC000  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_SHIFT                   14  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_WIDTH                    2  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_HWC_SRC_MASK                0x1800  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_SHIFT                   11  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_WIDTH                    2  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_VSEL                    0x0400  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_MASK               0x0400  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_SHIFT                  10  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_WIDTH                   1  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_MODE_MASK               0x0300  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_SHIFT                   8  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_WIDTH                   2  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_FLT                         0x0080  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_MASK                    0x0080  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_SHIFT                        7  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_WIDTH                        1  /* LDO4_FLT */
+#define WM831X_LDO4_SWI                         0x0040  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_MASK                    0x0040  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_SHIFT                        6  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_WIDTH                        1  /* LDO4_SWI */
+#define WM831X_LDO4_LP_MODE                     0x0001  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_MASK                0x0001  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_SHIFT                    0  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_WIDTH                    1  /* LDO4_LP_MODE */
+
+/*
+ * R16498 (0x4072) - LDO4 ON Control
+ */
+#define WM831X_LDO4_ON_SLOT_MASK                0xE000  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_SHIFT                   13  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_WIDTH                    3  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_MODE                     0x0100  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_MASK                0x0100  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_SHIFT                    8  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_WIDTH                    1  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_VSEL_MASK                0x001F  /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_SHIFT                    0  /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_WIDTH                    5  /* LDO4_ON_VSEL - [4:0] */
+
+/*
+ * R16499 (0x4073) - LDO4 SLEEP Control
+ */
+#define WM831X_LDO4_SLP_SLOT_MASK               0xE000  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_SHIFT                  13  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_WIDTH                   3  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_MODE                    0x0100  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_MASK               0x0100  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_SHIFT                   8  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_WIDTH                   1  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_VSEL_MASK               0x001F  /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_SHIFT                   0  /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_WIDTH                   5  /* LDO4_SLP_VSEL - [4:0] */
+
+/*
+ * R16500 (0x4074) - LDO5 Control
+ */
+#define WM831X_LDO5_ERR_ACT_MASK                0xC000  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_SHIFT                   14  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_WIDTH                    2  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_HWC_SRC_MASK                0x1800  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_SHIFT                   11  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_WIDTH                    2  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_VSEL                    0x0400  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_MASK               0x0400  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_SHIFT                  10  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_WIDTH                   1  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_MODE_MASK               0x0300  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_SHIFT                   8  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_WIDTH                   2  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_FLT                         0x0080  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_MASK                    0x0080  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_SHIFT                        7  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_WIDTH                        1  /* LDO5_FLT */
+#define WM831X_LDO5_SWI                         0x0040  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_MASK                    0x0040  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_SHIFT                        6  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_WIDTH                        1  /* LDO5_SWI */
+#define WM831X_LDO5_LP_MODE                     0x0001  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_MASK                0x0001  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_SHIFT                    0  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_WIDTH                    1  /* LDO5_LP_MODE */
+
+/*
+ * R16501 (0x4075) - LDO5 ON Control
+ */
+#define WM831X_LDO5_ON_SLOT_MASK                0xE000  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_SHIFT                   13  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_WIDTH                    3  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_MODE                     0x0100  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_MASK                0x0100  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_SHIFT                    8  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_WIDTH                    1  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_VSEL_MASK                0x001F  /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_SHIFT                    0  /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_WIDTH                    5  /* LDO5_ON_VSEL - [4:0] */
+
+/*
+ * R16502 (0x4076) - LDO5 SLEEP Control
+ */
+#define WM831X_LDO5_SLP_SLOT_MASK               0xE000  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_SHIFT                  13  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_WIDTH                   3  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_MODE                    0x0100  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_MASK               0x0100  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_SHIFT                   8  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_WIDTH                   1  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_VSEL_MASK               0x001F  /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_SHIFT                   0  /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_WIDTH                   5  /* LDO5_SLP_VSEL - [4:0] */
+
+/*
+ * R16503 (0x4077) - LDO6 Control
+ */
+#define WM831X_LDO6_ERR_ACT_MASK                0xC000  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_SHIFT                   14  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_WIDTH                    2  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_HWC_SRC_MASK                0x1800  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_SHIFT                   11  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_WIDTH                    2  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_VSEL                    0x0400  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_MASK               0x0400  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_SHIFT                  10  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_WIDTH                   1  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_MODE_MASK               0x0300  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_SHIFT                   8  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_WIDTH                   2  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_FLT                         0x0080  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_MASK                    0x0080  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_SHIFT                        7  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_WIDTH                        1  /* LDO6_FLT */
+#define WM831X_LDO6_SWI                         0x0040  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_MASK                    0x0040  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_SHIFT                        6  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_WIDTH                        1  /* LDO6_SWI */
+#define WM831X_LDO6_LP_MODE                     0x0001  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_MASK                0x0001  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_SHIFT                    0  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_WIDTH                    1  /* LDO6_LP_MODE */
+
+/*
+ * R16504 (0x4078) - LDO6 ON Control
+ */
+#define WM831X_LDO6_ON_SLOT_MASK                0xE000  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_SHIFT                   13  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_WIDTH                    3  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_MODE                     0x0100  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_MASK                0x0100  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_SHIFT                    8  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_WIDTH                    1  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_VSEL_MASK                0x001F  /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_SHIFT                    0  /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_WIDTH                    5  /* LDO6_ON_VSEL - [4:0] */
+
+/*
+ * R16505 (0x4079) - LDO6 SLEEP Control
+ */
+#define WM831X_LDO6_SLP_SLOT_MASK               0xE000  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_SHIFT                  13  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_WIDTH                   3  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_MODE                    0x0100  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_MASK               0x0100  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_SHIFT                   8  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_WIDTH                   1  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_VSEL_MASK               0x001F  /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_SHIFT                   0  /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_WIDTH                   5  /* LDO6_SLP_VSEL - [4:0] */
+
+/*
+ * R16506 (0x407A) - LDO7 Control
+ */
+#define WM831X_LDO7_ERR_ACT_MASK                0xC000  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_SHIFT                   14  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_WIDTH                    2  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_HWC_SRC_MASK                0x1800  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_SHIFT                   11  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_WIDTH                    2  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_VSEL                    0x0400  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_MASK               0x0400  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_SHIFT                  10  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_WIDTH                   1  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_MODE_MASK               0x0300  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_SHIFT                   8  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_WIDTH                   2  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_FLT                         0x0080  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_MASK                    0x0080  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_SHIFT                        7  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_WIDTH                        1  /* LDO7_FLT */
+#define WM831X_LDO7_SWI                         0x0040  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_MASK                    0x0040  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_SHIFT                        6  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_WIDTH                        1  /* LDO7_SWI */
+
+/*
+ * R16507 (0x407B) - LDO7 ON Control
+ */
+#define WM831X_LDO7_ON_SLOT_MASK                0xE000  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_SHIFT                   13  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_WIDTH                    3  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_MODE                     0x0100  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_MASK                0x0100  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_SHIFT                    8  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_WIDTH                    1  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_VSEL_MASK                0x001F  /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_SHIFT                    0  /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_WIDTH                    5  /* LDO7_ON_VSEL - [4:0] */
+
+/*
+ * R16508 (0x407C) - LDO7 SLEEP Control
+ */
+#define WM831X_LDO7_SLP_SLOT_MASK               0xE000  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_SHIFT                  13  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_WIDTH                   3  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_MODE                    0x0100  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_MASK               0x0100  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_SHIFT                   8  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_WIDTH                   1  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_VSEL_MASK               0x001F  /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_SHIFT                   0  /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_WIDTH                   5  /* LDO7_SLP_VSEL - [4:0] */
+
+/*
+ * R16509 (0x407D) - LDO8 Control
+ */
+#define WM831X_LDO8_ERR_ACT_MASK                0xC000  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_SHIFT                   14  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_WIDTH                    2  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_HWC_SRC_MASK                0x1800  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_SHIFT                   11  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_WIDTH                    2  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_VSEL                    0x0400  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_MASK               0x0400  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_SHIFT                  10  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_WIDTH                   1  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_MODE_MASK               0x0300  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_SHIFT                   8  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_WIDTH                   2  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_FLT                         0x0080  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_MASK                    0x0080  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_SHIFT                        7  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_WIDTH                        1  /* LDO8_FLT */
+#define WM831X_LDO8_SWI                         0x0040  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_MASK                    0x0040  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_SHIFT                        6  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_WIDTH                        1  /* LDO8_SWI */
+
+/*
+ * R16510 (0x407E) - LDO8 ON Control
+ */
+#define WM831X_LDO8_ON_SLOT_MASK                0xE000  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_SHIFT                   13  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_WIDTH                    3  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_MODE                     0x0100  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_MASK                0x0100  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_SHIFT                    8  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_WIDTH                    1  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_VSEL_MASK                0x001F  /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_SHIFT                    0  /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_WIDTH                    5  /* LDO8_ON_VSEL - [4:0] */
+
+/*
+ * R16511 (0x407F) - LDO8 SLEEP Control
+ */
+#define WM831X_LDO8_SLP_SLOT_MASK               0xE000  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_SHIFT                  13  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_WIDTH                   3  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_MODE                    0x0100  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_MASK               0x0100  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_SHIFT                   8  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_WIDTH                   1  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_VSEL_MASK               0x001F  /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_SHIFT                   0  /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_WIDTH                   5  /* LDO8_SLP_VSEL - [4:0] */
+
+/*
+ * R16512 (0x4080) - LDO9 Control
+ */
+#define WM831X_LDO9_ERR_ACT_MASK                0xC000  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_SHIFT                   14  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_WIDTH                    2  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_HWC_SRC_MASK                0x1800  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_SHIFT                   11  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_WIDTH                    2  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_VSEL                    0x0400  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_MASK               0x0400  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_SHIFT                  10  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_WIDTH                   1  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_MODE_MASK               0x0300  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_SHIFT                   8  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_WIDTH                   2  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_FLT                         0x0080  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_MASK                    0x0080  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_SHIFT                        7  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_WIDTH                        1  /* LDO9_FLT */
+#define WM831X_LDO9_SWI                         0x0040  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_MASK                    0x0040  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_SHIFT                        6  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_WIDTH                        1  /* LDO9_SWI */
+
+/*
+ * R16513 (0x4081) - LDO9 ON Control
+ */
+#define WM831X_LDO9_ON_SLOT_MASK                0xE000  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_SHIFT                   13  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_WIDTH                    3  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_MODE                     0x0100  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_MASK                0x0100  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_SHIFT                    8  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_WIDTH                    1  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_VSEL_MASK                0x001F  /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_SHIFT                    0  /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_WIDTH                    5  /* LDO9_ON_VSEL - [4:0] */
+
+/*
+ * R16514 (0x4082) - LDO9 SLEEP Control
+ */
+#define WM831X_LDO9_SLP_SLOT_MASK               0xE000  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_SHIFT                  13  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_WIDTH                   3  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_MODE                    0x0100  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_MASK               0x0100  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_SHIFT                   8  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_WIDTH                   1  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_VSEL_MASK               0x001F  /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_SHIFT                   0  /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_WIDTH                   5  /* LDO9_SLP_VSEL - [4:0] */
+
+/*
+ * R16515 (0x4083) - LDO10 Control
+ */
+#define WM831X_LDO10_ERR_ACT_MASK               0xC000  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_SHIFT                  14  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_WIDTH                   2  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_HWC_SRC_MASK               0x1800  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_SHIFT                  11  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_WIDTH                   2  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_VSEL                   0x0400  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_MASK              0x0400  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_SHIFT                 10  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_WIDTH                  1  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_MODE_MASK              0x0300  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_SHIFT                  8  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_WIDTH                  2  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_FLT                        0x0080  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_MASK                   0x0080  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_SHIFT                       7  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_WIDTH                       1  /* LDO10_FLT */
+#define WM831X_LDO10_SWI                        0x0040  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_MASK                   0x0040  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_SHIFT                       6  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_WIDTH                       1  /* LDO10_SWI */
+
+/*
+ * R16516 (0x4084) - LDO10 ON Control
+ */
+#define WM831X_LDO10_ON_SLOT_MASK               0xE000  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_SHIFT                  13  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_WIDTH                   3  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_MODE                    0x0100  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_MASK               0x0100  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_SHIFT                   8  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_WIDTH                   1  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_VSEL_MASK               0x001F  /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_SHIFT                   0  /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_WIDTH                   5  /* LDO10_ON_VSEL - [4:0] */
+
+/*
+ * R16517 (0x4085) - LDO10 SLEEP Control
+ */
+#define WM831X_LDO10_SLP_SLOT_MASK              0xE000  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_SHIFT                 13  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_WIDTH                  3  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_MODE                   0x0100  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_MASK              0x0100  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_SHIFT                  8  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_WIDTH                  1  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_VSEL_MASK              0x001F  /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_SHIFT                  0  /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_WIDTH                  5  /* LDO10_SLP_VSEL - [4:0] */
+
+/*
+ * R16519 (0x4087) - LDO11 ON Control
+ */
+#define WM831X_LDO11_ON_SLOT_MASK               0xE000  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_SHIFT                  13  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_WIDTH                   3  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_OFFENA                     0x1000  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_MASK                0x1000  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_SHIFT                   12  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_WIDTH                    1  /* LDO11_OFFENA */
+#define WM831X_LDO11_VSEL_SRC                   0x0080  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_MASK              0x0080  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_SHIFT                  7  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_WIDTH                  1  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_ON_VSEL_MASK               0x000F  /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_SHIFT                   0  /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_WIDTH                   4  /* LDO11_ON_VSEL - [3:0] */
+
+/*
+ * R16520 (0x4088) - LDO11 SLEEP Control
+ */
+#define WM831X_LDO11_SLP_SLOT_MASK              0xE000  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_SHIFT                 13  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_WIDTH                  3  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_VSEL_MASK              0x000F  /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_SHIFT                  0  /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_WIDTH                  4  /* LDO11_SLP_VSEL - [3:0] */
+
+/*
+ * R16526 (0x408E) - Power Good Source 1
+ */
+#define WM831X_DC4_OK                           0x0008  /* DC4_OK */
+#define WM831X_DC4_OK_MASK                      0x0008  /* DC4_OK */
+#define WM831X_DC4_OK_SHIFT                          3  /* DC4_OK */
+#define WM831X_DC4_OK_WIDTH                          1  /* DC4_OK */
+#define WM831X_DC3_OK                           0x0004  /* DC3_OK */
+#define WM831X_DC3_OK_MASK                      0x0004  /* DC3_OK */
+#define WM831X_DC3_OK_SHIFT                          2  /* DC3_OK */
+#define WM831X_DC3_OK_WIDTH                          1  /* DC3_OK */
+#define WM831X_DC2_OK                           0x0002  /* DC2_OK */
+#define WM831X_DC2_OK_MASK                      0x0002  /* DC2_OK */
+#define WM831X_DC2_OK_SHIFT                          1  /* DC2_OK */
+#define WM831X_DC2_OK_WIDTH                          1  /* DC2_OK */
+#define WM831X_DC1_OK                           0x0001  /* DC1_OK */
+#define WM831X_DC1_OK_MASK                      0x0001  /* DC1_OK */
+#define WM831X_DC1_OK_SHIFT                          0  /* DC1_OK */
+#define WM831X_DC1_OK_WIDTH                          1  /* DC1_OK */
+
+/*
+ * R16527 (0x408F) - Power Good Source 2
+ */
+#define WM831X_LDO10_OK                         0x0200  /* LDO10_OK */
+#define WM831X_LDO10_OK_MASK                    0x0200  /* LDO10_OK */
+#define WM831X_LDO10_OK_SHIFT                        9  /* LDO10_OK */
+#define WM831X_LDO10_OK_WIDTH                        1  /* LDO10_OK */
+#define WM831X_LDO9_OK                          0x0100  /* LDO9_OK */
+#define WM831X_LDO9_OK_MASK                     0x0100  /* LDO9_OK */
+#define WM831X_LDO9_OK_SHIFT                         8  /* LDO9_OK */
+#define WM831X_LDO9_OK_WIDTH                         1  /* LDO9_OK */
+#define WM831X_LDO8_OK                          0x0080  /* LDO8_OK */
+#define WM831X_LDO8_OK_MASK                     0x0080  /* LDO8_OK */
+#define WM831X_LDO8_OK_SHIFT                         7  /* LDO8_OK */
+#define WM831X_LDO8_OK_WIDTH                         1  /* LDO8_OK */
+#define WM831X_LDO7_OK                          0x0040  /* LDO7_OK */
+#define WM831X_LDO7_OK_MASK                     0x0040  /* LDO7_OK */
+#define WM831X_LDO7_OK_SHIFT                         6  /* LDO7_OK */
+#define WM831X_LDO7_OK_WIDTH                         1  /* LDO7_OK */
+#define WM831X_LDO6_OK                          0x0020  /* LDO6_OK */
+#define WM831X_LDO6_OK_MASK                     0x0020  /* LDO6_OK */
+#define WM831X_LDO6_OK_SHIFT                         5  /* LDO6_OK */
+#define WM831X_LDO6_OK_WIDTH                         1  /* LDO6_OK */
+#define WM831X_LDO5_OK                          0x0010  /* LDO5_OK */
+#define WM831X_LDO5_OK_MASK                     0x0010  /* LDO5_OK */
+#define WM831X_LDO5_OK_SHIFT                         4  /* LDO5_OK */
+#define WM831X_LDO5_OK_WIDTH                         1  /* LDO5_OK */
+#define WM831X_LDO4_OK                          0x0008  /* LDO4_OK */
+#define WM831X_LDO4_OK_MASK                     0x0008  /* LDO4_OK */
+#define WM831X_LDO4_OK_SHIFT                         3  /* LDO4_OK */
+#define WM831X_LDO4_OK_WIDTH                         1  /* LDO4_OK */
+#define WM831X_LDO3_OK                          0x0004  /* LDO3_OK */
+#define WM831X_LDO3_OK_MASK                     0x0004  /* LDO3_OK */
+#define WM831X_LDO3_OK_SHIFT                         2  /* LDO3_OK */
+#define WM831X_LDO3_OK_WIDTH                         1  /* LDO3_OK */
+#define WM831X_LDO2_OK                          0x0002  /* LDO2_OK */
+#define WM831X_LDO2_OK_MASK                     0x0002  /* LDO2_OK */
+#define WM831X_LDO2_OK_SHIFT                         1  /* LDO2_OK */
+#define WM831X_LDO2_OK_WIDTH                         1  /* LDO2_OK */
+#define WM831X_LDO1_OK                          0x0001  /* LDO1_OK */
+#define WM831X_LDO1_OK_MASK                     0x0001  /* LDO1_OK */
+#define WM831X_LDO1_OK_SHIFT                         0  /* LDO1_OK */
+#define WM831X_LDO1_OK_WIDTH                         1  /* LDO1_OK */
+
+#define WM831X_ISINK_MAX_ISEL 56
+extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
+
+#endif
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 42cca672f34..1d595de6a05 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -605,6 +605,11 @@ struct wm8350_irq {
 	void *data;
 };
 
+struct wm8350_hwmon {
+	struct platform_device *pdev;
+	struct device *classdev;
+};
+
 struct wm8350 {
 	struct device *dev;
 
@@ -621,7 +626,6 @@ struct wm8350 {
 	struct mutex auxadc_mutex;
 
 	/* Interrupt handling */
-	struct work_struct irq_work;
 	struct mutex irq_mutex; /* IRQ table mutex */
 	struct wm8350_irq irq[WM8350_NUM_IRQ];
 	int chip_irq;
@@ -629,6 +633,7 @@ struct wm8350 {
 	/* Client devices */
 	struct wm8350_codec codec;
 	struct wm8350_gpio gpio;
+	struct wm8350_hwmon hwmon;
 	struct wm8350_pmic pmic;
 	struct wm8350_power power;
 	struct wm8350_rtc rtc;
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 225f733e753..ce1be708ca1 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -193,6 +193,8 @@ void *rdev_get_drvdata(struct regulator_dev *rdev);
 struct device *rdev_get_dev(struct regulator_dev *rdev);
 int rdev_get_id(struct regulator_dev *rdev);
 
+int regulator_mode_to_status(unsigned int);
+
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
 
 #endif