diff options
| author | Anton Vorontsov <avorontsov@ru.mvista.com> | 2007-08-23 15:36:00 +0400 |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2007-09-14 08:54:13 -0500 |
| commit | 8237bf080e9ef6adc3f2adce26060722685bbb15 (patch) | |
| tree | f06c0e3e8479312b731c1e771daa33a128b6cd1b | |
| parent | 26f6cb999366a71b8e318bceaf8fafc1ffecae40 (diff) | |
[POWERPC] MPC832x_RDB: Update dts to use SPI1 in QE, register mmc_spi stub
Enabled using SPI controller on the MPC832x RDB board. We currently use
a modalias of "spidev" as a place holder (replace with "mmc_spie") until
the mmc_spi driver support is merged in.
This gets us the ability to test SPI until then.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| -rw-r--r-- | arch/powerpc/boot/dts/mpc832x_rdb.dts | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/mpc832x_rdb.c | 46 |
2 files changed, 47 insertions, 1 deletions
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index cdc4a94e9c2..388c8a7012e 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -175,7 +175,7 @@ reg = <4c0 40>; interrupts = <2>; interrupt-parent = <&qeic>; - mode = "cpu"; + mode = "cpu-qe"; }; spi@500 { diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index e6c1760f36e..24a790c79ec 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -15,6 +15,7 @@ */ #include <linux/pci.h> +#include <linux/spi/spi.h> #include <asm/of_platform.h> #include <asm/time.h> @@ -22,6 +23,7 @@ #include <asm/udbg.h> #include <asm/qe.h> #include <asm/qe_ic.h> +#include <sysdev/fsl_soc.h> #include "mpc83xx.h" @@ -32,6 +34,50 @@ #define DBG(fmt...) #endif +static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity) +{ + pr_debug("%s %d %d\n", __func__, cs, polarity); + par_io_data_set(3, 13, polarity); +} + +static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity) +{ + pr_debug("%s %d %d\n", __func__, cs, polarity); + par_io_data_set(3, 13, !polarity); +} + +static struct spi_board_info mpc832x_spi_boardinfo = { + .bus_num = 0x4c0, + .chip_select = 0, + .max_speed_hz = 50000000, + /* + * XXX: This is spidev (spi in userspace) stub, should + * be replaced by "mmc_spi" when mmc_spi will hit mainline. + */ + .modalias = "spidev", +}; + +static int __init mpc832x_spi_init(void) +{ + if (!machine_is(mpc832x_rdb)) + return 0; + + par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */ + par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */ + par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */ + par_io_config_pin(3, 3, 2, 0, 1, 0); /* SPI1 SEL, I */ + + par_io_config_pin(3, 13, 1, 0, 0, 0); /* !SD_CS, O */ + par_io_config_pin(3, 14, 2, 0, 0, 0); /* SD_INSERT, I */ + par_io_config_pin(3, 15, 2, 0, 0, 0); /* SD_PROTECT,I */ + + return fsl_spi_init(&mpc832x_spi_boardinfo, 1, + mpc83xx_spi_activate_cs, + mpc83xx_spi_deactivate_cs); +} + +device_initcall(mpc832x_spi_init); + /* ************************************************************************ * * Setup the architecture |