Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: thinkpad-acpi: bump up version to 0.16
  ACPI: thinkpad-acpi: revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED option
  ACPI: fix CONFIG_NET=n acpi_bus_generate_netlink_event build failure
  msi-laptop: replace ',' with ';'
  ACPI: (more) delete CONFIG_ACPI_PROCFS_SLEEP (again)

7 files changed, 172 insertions, 103 deletions

diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index eb2f5986e1e..60953d6c919 100644
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.15
-                           July 1st, 2007
+                            Version 0.16
+                          August 2nd, 2007
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -161,20 +161,22 @@ system.  Enabling the hotkey functionality of thinkpad-acpi signals the
 firmware that such a driver is present, and modifies how the ThinkPad
 firmware will behave in many situations.
 
+The driver enables the hot key feature automatically when loaded.  The
+feature can later be disabled and enabled back at runtime.  The driver
+will also restore the hot key feature to its previous state and mask
+when it is unloaded.
+
 When the hotkey feature is enabled and the hot key mask is set (see
-below), the various hot keys either generate ACPI events in the
-following format:
+below), the driver will report HKEY events in the following format:
 
 	ibm/hotkey HKEY 00000080 0000xxxx
 
-or events over the input layer.  The input layer support accepts the
-standard IOCTLs to remap the keycodes assigned to each hotkey.
+Some of these events refer to hot key presses, but not all.
 
-When the input device is open, the driver will suppress any ACPI hot key
-events that get translated into a meaningful input layer event, in order
-to avoid sending duplicate events to userspace.  Hot keys that are
-mapped to KEY_RESERVED in the keymap are not translated, and will always
-generate an ACPI ibm/hotkey HKEY event, and no input layer events.
+The driver will generate events over the input layer for hot keys and
+radio switches, and over the ACPI netlink layer for other events.  The
+input layer support accepts the standard IOCTLs to remap the keycodes
+assigned to each hot key.
 
 The hot key bit mask allows some control over which hot keys generate
 events.  If a key is "masked" (bit set to 0 in the mask), the firmware
@@ -256,6 +258,20 @@ sysfs notes:
 		disabled" postition, and 1 if the switch is in the
 		"radios enabled" position.
 
+	hotkey_report_mode:
+		Returns the state of the procfs ACPI event report mode
+		filter for hot keys.  If it is set to 1 (the default),
+		all hot key presses are reported both through the input
+		layer and also as ACPI events through procfs (but not
+		through netlink).  If it is set to 2, hot key presses
+		are reported only through the input layer.
+
+		This attribute is read-only in kernels 2.6.23 or later,
+		and read-write on earlier kernels.
+
+		May return -EPERM (write access locked out by module
+		parameter) or -EACCES (read-only).
+
 input layer notes:
 
 A Hot key is mapped to a single input layer EV_KEY event, possibly
@@ -393,21 +409,63 @@ unknown by the driver if the ThinkPad firmware triggered these events on
 hot key press or release, but the firmware will do it for either one, not
 both.
 
-If a key is mapped to KEY_RESERVED, it generates no input events at all,
-and it may generate a legacy thinkpad-acpi ACPI hotkey event.
-
+If a key is mapped to KEY_RESERVED, it generates no input events at all.
 If a key is mapped to KEY_UNKNOWN, it generates an input event that
-includes an scan code, and it may also generate a legacy thinkpad-acpi
-ACPI hotkey event.
-
-If a key is mapped to anything else, it will only generate legacy
-thinkpad-acpi ACPI hotkey events if nobody has opened the input device.
+includes an scan code.  If a key is mapped to anything else, it will
+generate input device EV_KEY events.
 
 Non hot-key ACPI HKEY event map:
 0x5001		Lid closed
 0x5002		Lid opened
 0x7000		Radio Switch may have changed state
 
+The above events are not propagated by the driver, except for legacy
+compatibility purposes when hotkey_report_mode is set to 1.
+
+Compatibility notes:
+
+ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
+supported the input layer, and sent events over the procfs ACPI event
+interface.
+
+To avoid sending duplicate events over the input layer and the ACPI
+event interface, thinkpad-acpi 0.16 implements a module parameter
+(hotkey_report_mode), and also a sysfs device attribute with the same
+name.
+
+Make no mistake here: userspace is expected to switch to using the input
+layer interface of thinkpad-acpi, together with the ACPI netlink event
+interface in kernels 2.6.23 and later, or with the ACPI procfs event
+interface in kernels 2.6.22 and earlier.
+
+If no hotkey_report_mode module parameter is specified (or it is set to
+zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22
+and earlier, also allows one to change the hotkey_report_mode through
+sysfs.  In kernels 2.6.23 and later, where the netlink ACPI event
+interface is available, hotkey_report_mode cannot be changed through
+sysfs (it is read-only).
+
+If the hotkey_report_mode module parameter is set to 1 or 2, it cannot
+be changed later through sysfs (any writes will return -EPERM to signal
+that hotkey_report_mode was locked.  On 2.6.23 and later, where
+hotkey_report_mode cannot be changed at all, writes will return -EACES).
+
+hotkey_report_mode set to 1 makes the driver export through the procfs
+ACPI event interface all hot key presses (which are *also* sent to the
+input layer).  This is a legacy compatibility behaviour, and it is also
+the default mode of operation for the driver.
+
+hotkey_report_mode set to 2 makes the driver filter out the hot key
+presses from the procfs ACPI event interface, so these events will only
+be sent through the input layer.  Userspace that has been updated to use
+the thinkpad-acpi input layer interface should set hotkey_report_mode to
+2.
+
+Hot key press events are never sent to the ACPI netlink event interface.
+Really up-to-date userspace under kernel 2.6.23 and later is to use the
+netlink interface and the input layer interface, and don't bother at all
+with hotkey_report_mode.
+
 
 Bluetooth
 ---------
diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c
index a2b9304596c..5c95863f8fa 100644
--- a/drivers/acpi/event.c
+++ b/drivers/acpi/event.c
@@ -240,7 +240,7 @@ int acpi_bus_generate_netlink_event(const char *device_class,
 	return 0;
 }
 
-EXPORT_SYMBOL(acpi_generate_netlink_event);
+EXPORT_SYMBOL(acpi_bus_generate_netlink_event);
 
 static int acpi_event_genetlink_init(void)
 {
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 66b62b0d360..3839efd5eae 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -23,7 +23,7 @@
  */
 
 ACPI_MODULE_NAME("sleep")
-#ifdef	CONFIG_ACPI_PROCFS_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset)
 {
 	int i;
@@ -76,7 +76,7 @@ acpi_system_write_sleep(struct file *file,
       Done:
 	return error ? error : count;
 }
-#endif				/* CONFIG_ACPI_PROCFS_SLEEP */
+#endif				/* CONFIG_ACPI_PROCFS */
 
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86)
 /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
@@ -471,7 +471,7 @@ static const struct file_operations acpi_system_wakeup_device_fops = {
 	.release = single_release,
 };
 
-#ifdef	CONFIG_ACPI_PROCFS_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 static const struct file_operations acpi_system_sleep_fops = {
 	.open = acpi_system_sleep_open_fs,
 	.read = seq_read,
@@ -479,7 +479,7 @@ static const struct file_operations acpi_system_sleep_fops = {
 	.llseek = seq_lseek,
 	.release = single_release,
 };
-#endif				/* CONFIG_ACPI_PROCFS_SLEEP */
+#endif				/* CONFIG_ACPI_PROCFS */
 
 #ifdef	HAVE_ACPI_LEGACY_ALARM
 static const struct file_operations acpi_system_alarm_fops = {
@@ -506,7 +506,7 @@ static int __init acpi_sleep_proc_init(void)
 	if (acpi_disabled)
 		return 0;
 
-#ifdef	CONFIG_ACPI_PROCFS_SLEEP
+#ifdef	CONFIG_ACPI_PROCFS
 	/* 'sleep' [R/W] */
 	entry =
 	    create_proc_entry("sleep", S_IFREG | S_IRUGO | S_IWUSR,
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a26655881e6..73e248fb2ff 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -202,25 +202,5 @@ config THINKPAD_ACPI_BAY
 
 	  If you are not sure, say Y here.
 
-config THINKPAD_ACPI_INPUT_ENABLED
-	bool "Enable input layer support by default"
-	depends on THINKPAD_ACPI
-	default n
-	---help---
-	  This option enables thinkpad-acpi hot key handling over the input
-	  layer at driver load time.  When it is unset, the driver does not
-	  enable hot key handling by default, and also starts up with a mostly
-	  empty keymap.
-
-	  This option should be enabled if you have a new enough HAL or other
-	  userspace support that properly handles the thinkpad-acpi event
-	  device.  It auto-tunes the hot key support to those reported by the
-	  firmware and enables it automatically.
-
-	  If unsure, say N here to retain the old behaviour of ibm-acpi, and
-	  thinkpad-acpi up to kernel 2.6.21: userspace will have to enable and
-	  set up the thinkpad-acpi hot key handling using the sysfs interace
-	  after loading the driver.
-
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c
index 932a415197b..349be934db7 100644
--- a/drivers/misc/msi-laptop.c
+++ b/drivers/misc/msi-laptop.c
@@ -353,7 +353,7 @@ static int __init msi_init(void)
 	if (IS_ERR(msibl_device))
 		return PTR_ERR(msibl_device);
 
-	msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1,
+	msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1;
 
 	ret = platform_driver_register(&msipf_driver);
 	if (ret)
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index bb8956d0c10..0222bbaf7b7 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -21,7 +21,7 @@
  *  02110-1301, USA.
  */
 
-#define IBM_VERSION "0.15"
+#define IBM_VERSION "0.16"
 #define TPACPI_SYSFS_VERSION 0x010000
 
 /*
@@ -906,9 +906,26 @@ static ssize_t hotkey_radio_sw_show(struct device *dev,
 static struct device_attribute dev_attr_hotkey_radio_sw =
 	__ATTR(hotkey_radio_sw, S_IRUGO, hotkey_radio_sw_show, NULL);
 
+/* sysfs hotkey report_mode -------------------------------------------- */
+static ssize_t hotkey_report_mode_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+		(hotkey_report_mode != 0) ? hotkey_report_mode : 1);
+}
+
+static struct device_attribute dev_attr_hotkey_report_mode =
+	__ATTR(hotkey_report_mode, S_IRUGO, hotkey_report_mode_show, NULL);
+
 /* --------------------------------------------------------------------- */
 
-static struct attribute *hotkey_mask_attributes[] = {
+static struct attribute *hotkey_attributes[] __initdata = {
+	&dev_attr_hotkey_enable.attr,
+	&dev_attr_hotkey_report_mode.attr,
+};
+
+static struct attribute *hotkey_mask_attributes[] __initdata = {
 	&dev_attr_hotkey_mask.attr,
 	&dev_attr_hotkey_bios_enabled.attr,
 	&dev_attr_hotkey_bios_mask.attr,
@@ -987,11 +1004,12 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		str_supported(tp_features.hotkey));
 
 	if (tp_features.hotkey) {
-		hotkey_dev_attributes = create_attr_set(7, NULL);
+		hotkey_dev_attributes = create_attr_set(8, NULL);
 		if (!hotkey_dev_attributes)
 			return -ENOMEM;
-		res = add_to_attr_set(hotkey_dev_attributes,
-				&dev_attr_hotkey_enable.attr);
+		res = add_many_to_attr_set(hotkey_dev_attributes,
+				hotkey_attributes,
+				ARRAY_SIZE(hotkey_attributes));
 		if (res)
 			return res;
 
@@ -1055,11 +1073,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 				TPACPI_HOTKEY_MAP_SIZE);
 		}
 
-#ifndef CONFIG_THINKPAD_ACPI_INPUT_ENABLED
-		for (i = 0; i < 12; i++)
-			hotkey_keycode_map[i] = KEY_UNKNOWN;
-#endif /* ! CONFIG_THINKPAD_ACPI_INPUT_ENABLED */
-
 		set_bit(EV_KEY, tpacpi_inputdev->evbit);
 		set_bit(EV_MSC, tpacpi_inputdev->evbit);
 		set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
@@ -1081,14 +1094,17 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 			set_bit(SW_RADIO, tpacpi_inputdev->swbit);
 		}
 
-#ifdef CONFIG_THINKPAD_ACPI_INPUT_ENABLED
 		dbg_printk(TPACPI_DBG_INIT,
 				"enabling hot key handling\n");
 		res = hotkey_set(1, (hotkey_all_mask & ~hotkey_reserved_mask)
 					| hotkey_orig_mask);
 		if (res)
 			return res;
-#endif /* CONFIG_THINKPAD_ACPI_INPUT_ENABLED */
+
+		dbg_printk(TPACPI_DBG_INIT,
+				"legacy hot key reporting over procfs %s\n",
+				(hotkey_report_mode < 2) ?
+					"enabled" : "disabled");
 	}
 
 	return (tp_features.hotkey)? 0 : 1;
@@ -1142,58 +1158,65 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 {
 	u32 hkey;
 	unsigned int keycode, scancode;
-	int sendacpi = 1;
+	int send_acpi_ev = 0;
 
 	if (event == 0x80 && acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) {
-		if (tpacpi_inputdev->users > 0) {
-			switch (hkey >> 12) {
-			case 1:
-				/* 0x1000-0x1FFF: key presses */
-				scancode = hkey & 0xfff;
-				if (scancode > 0 && scancode < 0x21) {
-					scancode--;
-					keycode = hotkey_keycode_map[scancode];
-					tpacpi_input_send_key(scancode, keycode);
-					sendacpi = (keycode == KEY_RESERVED
-						|| keycode == KEY_UNKNOWN);
-				} else {
-					printk(IBM_ERR
-					       "hotkey 0x%04x out of range for keyboard map\n",
-					       hkey);
-				}
-				break;
-			case 5:
-				/* 0x5000-0x5FFF: LID */
-				/* we don't handle it through this path, just
-				 * eat up known LID events */
-				if (hkey != 0x5001 && hkey != 0x5002) {
-					printk(IBM_ERR
-						"unknown LID-related hotkey event: 0x%04x\n",
-						hkey);
-				}
+		switch (hkey >> 12) {
+		case 1:
+			/* 0x1000-0x1FFF: key presses */
+			scancode = hkey & 0xfff;
+			if (scancode > 0 && scancode < 0x21) {
+				scancode--;
+				keycode = hotkey_keycode_map[scancode];
+				tpacpi_input_send_key(scancode, keycode);
+			} else {
+				printk(IBM_ERR
+				       "hotkey 0x%04x out of range for keyboard map\n",
+				       hkey);
+				send_acpi_ev = 1;
+			}
+			break;
+		case 5:
+			/* 0x5000-0x5FFF: LID */
+			/* we don't handle it through this path, just
+			 * eat up known LID events */
+			if (hkey != 0x5001 && hkey != 0x5002) {
+				printk(IBM_ERR
+					"unknown LID-related hotkey event: 0x%04x\n",
+					hkey);
+				send_acpi_ev = 1;
+			}
+			break;
+		case 7:
+			/* 0x7000-0x7FFF: misc */
+			if (tp_features.hotkey_wlsw && hkey == 0x7000) {
+				tpacpi_input_send_radiosw();
 				break;
-			case 7:
-				/* 0x7000-0x7FFF: misc */
-				if (tp_features.hotkey_wlsw && hkey == 0x7000) {
-						tpacpi_input_send_radiosw();
-						sendacpi = 0;
-					break;
-				}
-				/* fallthrough to default */
-			default:
-				/* case 2: dock-related */
-				/*	0x2305 - T43 waking up due to bay lever eject while aslept */
-				/* case 3: ultra-bay related. maybe bay in dock? */
-				/*	0x3003 - T43 after wake up by bay lever eject (0x2305) */
-				printk(IBM_NOTICE "unhandled hotkey event 0x%04x\n", hkey);
 			}
+			/* fallthrough to default */
+		default:
+			/* case 2: dock-related */
+			/*	0x2305 - T43 waking up due to bay lever eject while aslept */
+			/* case 3: ultra-bay related. maybe bay in dock? */
+			/*	0x3003 - T43 after wake up by bay lever eject (0x2305) */
+			printk(IBM_NOTICE "unhandled HKEY event 0x%04x\n", hkey);
+			send_acpi_ev = 1;
 		}
-
-		if (sendacpi)
-			acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey);
 	} else {
 		printk(IBM_ERR "unknown hotkey notification event %d\n", event);
-		acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
+		hkey = 0;
+		send_acpi_ev = 1;
+	}
+
+	/* Legacy events */
+	if (send_acpi_ev || hotkey_report_mode < 2)
+		acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey);
+
+	/* netlink events */
+	if (send_acpi_ev) {
+		acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
+						ibm->acpi->device->dev.bus_id,
+						event, hkey);
 	}
 }
 
@@ -4623,6 +4646,9 @@ module_param_named(fan_control, fan_control_allowed, bool, 0);
 static int brightness_mode;
 module_param_named(brightness_mode, brightness_mode, int, 0);
 
+static unsigned int hotkey_report_mode;
+module_param(hotkey_report_mode, uint, 0);
+
 #define IBM_PARAM(feature) \
 	module_param_call(feature, set_ibm_param, NULL, NULL, 0)
 
@@ -4648,6 +4674,10 @@ static int __init thinkpad_acpi_module_init(void)
 {
 	int ret, i;
 
+	/* Parameter checking */
+	if (hotkey_report_mode > 2)
+		return -EINVAL;
+
 	/* Driver-level probe */
 
 	get_thinkpad_model_data(&thinkpad_id);
diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h
index eee8809a50d..082a1cbc16c 100644
--- a/drivers/misc/thinkpad_acpi.h
+++ b/drivers/misc/thinkpad_acpi.h
@@ -181,6 +181,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv);
 static int experimental;
 static u32 dbg_level;
 static int force_load;
+static unsigned int hotkey_report_mode;
 
 static int thinkpad_acpi_module_init(void);
 static void thinkpad_acpi_module_exit(void);