Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4117/1: S3C2412: Fix writel() usage in selection code
  [ARM] 4111/1: Allow VFP to work with thread migration on SMP
  [ARM] 4112/1: Only ioremap to supersections if DOMAIN_IO is zero
  [ARM] 4106/1: S3C2410: typo fixes in register definitions
  [ARM] 4102/1: Allow for PHYS_OFFSET on any valid 2MiB address
  [ARM] Fix AMBA serial drivers for non-first serial ports
  [ARM] 4100/1: iop3xx: fix cpu mask for iop333
  [ARM] Update mach-types
  [ARM] Fix show_mem() for discontigmem
  [ARM] 4096/1: S3C24XX: change return code form s3c2410_gpio_getcfg()
  [ARM] 4095/1: S3C24XX: Fix GPIO set for Bank A
  [ARM] 4092/1: i.MX/MX1 CPU Frequency scaling latency definition
  [ARM] 4089/1: AT91: GPIO wake IRQ cleanup
  [ARM] 4088/1: AT91: Unbalanced IRQ in serial driver suspend/resume
  [ARM] 4087/1: AT91: CPU reset for SAM9x processors
  [ARM] 4086/1: AT91: Whitespace cleanup
  [ARM] 4085/1: AT91: Header fixes.
  [ARM] 4084/1: Remove CONFIG_DEBUG_WAITQ

34 files changed, 187 insertions, 96 deletions

diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 79049206dfa..46b0c734aeb 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -923,7 +923,6 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 784ad7c0186..fcd8fa091e9 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -1079,7 +1079,6 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index d994561816a..cf495a3084b 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -22,6 +22,10 @@
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
+#if (PHYS_OFFSET & 0x001fffff)
+#error "PHYS_OFFSET must be at an even 2MiB boundary!"
+#endif
+
 #define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
 #define KERNEL_RAM_PADDR	(PHYS_OFFSET + TEXT_OFFSET)
 
@@ -251,7 +255,8 @@ __create_page_tables:
 	 * Then map first 1MB of ram in case it contains our boot params.
 	 */
 	add	r0, r4, #PAGE_OFFSET >> 18
-	orr	r6, r7, #PHYS_OFFSET
+	orr	r6, r7, #(PHYS_OFFSET & 0xff000000)
+	orr	r6, r6, #(PHYS_OFFSET & 0x00e00000)
 	str	r6, [r0]
 
 #ifdef CONFIG_XIP_KERNEL
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_devices.c b/arch/arm/mach-at91rm9200/at91rm9200_devices.c
index 4641b99db0e..57fac7203fe 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200_devices.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200_devices.c
@@ -272,7 +272,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PC12, 0);	/* NCS6/CFCE2 */
 
 	/* nWAIT is _not_ a default setting */
-	at91_set_A_periph(AT91_PIN_PC6, 1);	/*  nWAIT */
+	at91_set_A_periph(AT91_PIN_PC6, 1);	/* nWAIT */
 
 	cf_data = *data;
 	platform_device_register(&at91rm9200_cf_device);
diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91rm9200/at91sam9260.c
index 203f073a53e..b14871adc30 100644
--- a/arch/arm/mach-at91rm9200/at91sam9260.c
+++ b/arch/arm/mach-at91rm9200/at91sam9260.c
@@ -16,6 +16,7 @@
 #include <asm/mach/map.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -212,7 +213,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = {
 
 static void at91sam9260_reset(void)
 {
-#warning "Implement CPU reset"
+	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91rm9200/at91sam9261.c
index 5a82f35da2e..d242bb885c6 100644
--- a/arch/arm/mach-at91rm9200/at91sam9261.c
+++ b/arch/arm/mach-at91rm9200/at91sam9261.c
@@ -16,6 +16,7 @@
 #include <asm/mach/map.h>
 #include <asm/arch/at91sam9261.h>
 #include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -207,7 +208,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = {
 
 static void at91sam9261_reset(void)
 {
-#warning "Implement CPU reset"
+	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 3f188508c39..af22659c8a2 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -20,7 +20,6 @@
 #include <asm/io.h>
 #include <asm/hardware.h>
 #include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
 
 #include "generic.h"
@@ -224,17 +223,17 @@ static u32 backups[MAX_GPIO_BANKS];
 static int gpio_irq_set_wake(unsigned pin, unsigned state)
 {
 	unsigned	mask = pin_to_mask(pin);
+	unsigned	bank = (pin - PIN_BASE) / 32;
 
-	pin -= PIN_BASE;
-	pin /= 32;
-
-	if (unlikely(pin >= MAX_GPIO_BANKS))
+	if (unlikely(bank >= MAX_GPIO_BANKS))
 		return -EINVAL;
 
 	if (state)
-		wakeups[pin] |= mask;
+		wakeups[bank] |= mask;
 	else
-		wakeups[pin] &= ~mask;
+		wakeups[bank] &= ~mask;
+
+	set_irq_wake(gpio[bank].id, state);
 
 	return 0;
 }
@@ -246,29 +245,15 @@ void at91_gpio_suspend(void)
 	for (i = 0; i < gpio_banks; i++) {
 		u32 pio = gpio[i].offset;
 
-		/*
-		 * Note: drivers should have disabled GPIO interrupts that
-		 * aren't supposed to be wakeup sources.
-		 * But that is not much good on ARM.....  disable_irq() does
-		 * not update the hardware immediately, so the hardware mask
-		 * (IMR) has the wrong value (not current, too much is
-		 * permitted).
-		 *
-		 * Our workaround is to disable all non-wakeup IRQs ...
-		 * which is exactly what correct drivers asked for in the
-		 * first place!
-		 */
 		backups[i] = at91_sys_read(pio + PIO_IMR);
 		at91_sys_write(pio + PIO_IDR, backups[i]);
 		at91_sys_write(pio + PIO_IER, wakeups[i]);
 
-		if (!wakeups[i]) {
-			disable_irq_wake(gpio[i].id);
-			at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id);
-		} else {
-			enable_irq_wake(gpio[i].id);
+		if (!wakeups[i])
+			clk_disable(gpio[i].clock);
+		else {
 #ifdef CONFIG_PM_DEBUG
-			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
+			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
 #endif
 		}
 	}
@@ -281,9 +266,11 @@ void at91_gpio_resume(void)
 	for (i = 0; i < gpio_banks; i++) {
 		u32 pio = gpio[i].offset;
 
+		if (!wakeups[i])
+			clk_enable(gpio[i].clock);
+
 		at91_sys_write(pio + PIO_IDR, wakeups[i]);
 		at91_sys_write(pio + PIO_IER, backups[i]);
-		at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id);
 	}
 }
 
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index ac5f9989566..4f66e90db74 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -184,6 +184,17 @@ static int imx_set_target(struct cpufreq_policy *policy,
 	long sysclk;
 	unsigned int bclk_div = 1;
 
+	/*
+	 * Some governors do not respects CPU and policy lower limits
+	 * which leads to bad things (division by zero etc), ensure
+	 * that such things do not happen.
+	 */
+	if(target_freq < policy->cpuinfo.min_freq)
+		target_freq = policy->cpuinfo.min_freq;
+
+	if(target_freq < policy->min)
+		target_freq = policy->min;
+
 	freq = target_freq * 1000;
 
 	pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
@@ -258,7 +269,8 @@ static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
 	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->cpuinfo.min_freq = 8000;
 	policy->cpuinfo.max_freq = 200000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	 /* Manual states, that PLL stabilizes in two CLK32 periods */
+	policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index ba346546150..f6fb215bb48 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -57,6 +57,7 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
 	case S3C2410_GPIO_SFN2:
 	case S3C2410_GPIO_SFN3:
 		if (pin < S3C2410_GPIO_BANKB) {
+			function -= 1;
 			function &= 1;
 			function <<= S3C2410_GPIO_OFFSET(pin);
 		} else {
@@ -83,15 +84,18 @@ EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
 unsigned int s3c2410_gpio_getcfg(unsigned int pin)
 {
 	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long mask;
+	unsigned long val = __raw_readl(base);
 
 	if (pin < S3C2410_GPIO_BANKB) {
-		mask = 1 << S3C2410_GPIO_OFFSET(pin);
+		val >>= S3C2410_GPIO_OFFSET(pin);
+		val &= 1;
+		val += 1;
 	} else {
-		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
+		val >>= S3C2410_GPIO_OFFSET(pin)*2;
+		val &= 3;
 	}
 
-	return __raw_readl(base) & mask;
+	return val | S3C2410_GPIO_INPUT;
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getcfg);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 00834097eb8..ebf294dd31d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -451,15 +451,14 @@ static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
 		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
 
 	pinstate = s3c2410_gpio_getcfg(pin);
-	pinstate >>= S3C2410_GPIO_OFFSET(pin)*2;
 
 	if (!irqstate) {
-		if (pinstate == 0x02)
+		if (pinstate == S3C2410_GPIO_IRQ)
 			DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
 	} else {
-		if (pinstate == 0x02) {
+		if (pinstate == S3C2410_GPIO_IRQ) {
 			DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
-			s3c2410_gpio_cfgpin(pin, 0x00);
+			s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
 		}
 	}
 }
diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c
index fe71a8fdb87..138f726ac6b 100644
--- a/arch/arm/mach-s3c2410/s3c2412-dma.c
+++ b/arch/arm/mach-s3c2410/s3c2412-dma.c
@@ -133,8 +133,8 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
 			       struct s3c24xx_dma_map *map)
 {
-	writel(chan->regs + S3C2412_DMA_DMAREQSEL,
-	       map->channels[0] | S3C2412_DMAREQSEL_HW);
+	writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
+	       chan->regs + S3C2412_DMA_DMAREQSEL);
 }
 
 static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b5814b4b6f3..7760193e74c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -52,15 +52,18 @@ void show_mem(void)
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 
 	for_each_online_node(node) {
+		pg_data_t *n = NODE_DATA(node);
+		struct page *map = n->node_mem_map - n->node_start_pfn;
+
 		for_each_nodebank (i,mi,node) {
 			unsigned int pfn1, pfn2;
 			struct page *page, *end;
 
-			pfn1 = mi->bank[i].start >> PAGE_SHIFT;
-			pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT;
+			pfn1 = __phys_to_pfn(mi->bank[i].start);
+			pfn2 = __phys_to_pfn(mi->bank[i].size + mi->bank[i].start);
 
-			page = NODE_MEM_MAP(node) + pfn1;
-			end  = NODE_MEM_MAP(node) + pfn2;
+			page = map + pfn1;
+			end  = map + pfn2;
 
 			do {
 				total++;
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 251685fe73a..0ac615c0f79 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -300,7 +300,8 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
  	addr = (unsigned long)area->addr;
 
 #ifndef CONFIG_SMP
-	if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
+	if (DOMAIN_IO == 0 &&
+	    (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
 	       cpu_is_xsc3()) &&
 	       !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
 		area->flags |= VM_ARM_SECTION_MAPPING;
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 490e11b3423..d29fe927ee9 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -708,7 +708,7 @@ __8032x_proc_info:
 	.type	__8033x_proc_info,#object
 __8033x_proc_info:
 	.long	0x69054010
-	.long	0xffffff30
+	.long	0xfffffd30
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_BUFFERABLE | \
 		PMD_SECT_CACHEABLE | \
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8bcb838e544..bd78058b717 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Dec 7 17:19:20 2006
+# Last update: Tue Jan 16 16:52:56 2007
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1219,3 +1219,26 @@ zevio_1020		MACH_ZEVIO_1020		ZEVIO_1020		1207
 hitrack			MACH_HITRACK		HITRACK			1208
 syme1			MACH_SYME1		SYME1			1209
 syhl1			MACH_SYHL1		SYHL1			1210
+empca400		MACH_EMPCA400		EMPCA400		1211
+em7210			MACH_EM7210		EM7210			1212
+htchermes		MACH_HTCHERMES		HTCHERMES		1213
+eti_c1			MACH_ETI_C1		ETI_C1			1214
+mach_dep2410		MACH_MACH_DEP2410	MACH_DEP2410		1215
+ac100			MACH_AC100		AC100			1216
+sneetch			MACH_SNEETCH		SNEETCH			1217
+studentmate		MACH_STUDENTMATE	STUDENTMATE		1218
+zir2410			MACH_ZIR2410		ZIR2410			1219
+zir2413			MACH_ZIR2413		ZIR2413			1220
+dlonip3			MACH_DLONIP3		DLONIP3			1221
+instream		MACH_INSTREAM		INSTREAM		1222
+ambarella		MACH_AMBARELLA		AMBARELLA		1223
+nevis			MACH_NEVIS		NEVIS			1224
+htc_trinity		MACH_HTC_TRINITY	HTC_TRINITY		1225
+ql202b			MACH_QL202B		QL202B			1226
+vpac270			MACH_VPAC270		VPAC270			1227
+rd129			MACH_RD129		RD129			1228
+htcwizard		MACH_HTCWIZARD		HTCWIZARD		1229
+xscale_treo680		MACH_XSCALE_TREO680	XSCALE_TREO680		1230
+tecon_tmezon		MACH_TECON_TMEZON	TECON_TMEZON		1231
+zylonite		MACH_ZYLONITE		ZYLONITE		1233
+gene1270		MACH_GENE1270		GENE1270		1234
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 7b595547c1c..ca2a5ad19ea 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -25,6 +25,7 @@
 do_vfp:
 	enable_irq
  	ldr	r4, .LCvfp
+	ldr	r11, [r10, #TI_CPU]	@ CPU number
 	add	r10, r10, #TI_VFPSTATE	@ r10 = workspace
 	ldr	pc, [r4]		@ call VFP entry point
 
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index f2797896e6d..54a2ad6d9ca 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -370,3 +370,7 @@ struct op {
 	u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);
 	u32 flags;
 };
+
+#ifdef CONFIG_SMP
+extern void vfp_save_state(void *location, u32 fpexc);
+#endif
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index e51e6679c40..d4b7b229631 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -65,6 +65,7 @@
 @  r2  = faulted PC+4
 @  r9  = successful return
 @  r10 = vfp_state union
+@  r11 = CPU number
 @  lr  = failure return
 
 	.globl	vfp_support_entry
@@ -79,7 +80,7 @@ vfp_support_entry:
 	DBGSTR1 "enable %x", r10
 	ldr	r3, last_VFP_context_address
 	orr	r1, r1, #FPEXC_ENABLE	@ user FPEXC has the enable bit set
-	ldr	r4, [r3]		@ last_VFP_context pointer
+	ldr	r4, [r3, r11, lsl #2]	@ last_VFP_context pointer
 	bic	r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled
 	cmp	r4, r10
 	beq	check_for_exception	@ we are returning to the same
@@ -91,7 +92,9 @@ vfp_support_entry:
 					@ exceptions, so we can get at the
 					@ rest of it
 
+#ifndef CONFIG_SMP
 	@ Save out the current registers to the old thread state
+	@ No need for SMP since this is not done lazily
 
 	DBGSTR1	"save old state %p", r4
 	cmp	r4, #0
@@ -105,10 +108,11 @@ vfp_support_entry:
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
 					@ and point r4 at the word at the
 					@ start of the register dump
+#endif
 
 no_old_VFP_process:
 	DBGSTR1	"load state %p", r10
-	str	r10, [r3]		@ update the last_VFP_context pointer
+	str	r10, [r3, r11, lsl #2]	@ update the last_VFP_context pointer
 					@ Load the saved state back into the VFP
 	VFPFLDMIA r10	 		@ reload the working registers while
 					@ FPEXC is in a safe state
@@ -162,6 +166,24 @@ process_exception:
 					@ required. If not, the user code will
 					@ retry the faulted instruction
 
+#ifdef CONFIG_SMP
+	.globl	vfp_save_state
+	.type	vfp_save_state, %function
+vfp_save_state:
+	@ Save the current VFP state
+	@ r0 - save location
+	@ r1 - FPEXC
+	DBGSTR1	"save VFP state %p", r0
+	VFPFMRX	r2, FPSCR		@ current status
+	VFPFMRX	r3, FPINST		@ FPINST (always there, rev0 onwards)
+	tst	r1, #FPEXC_FPV2		@ is there an FPINST2 to read?
+	VFPFMRX	r12, FPINST2, NE	@ FPINST2 if needed - avoids reading
+					@ nonexistant reg on rev0
+	VFPFSTMIA r0 			@ save the working registers
+	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
+	mov	pc, lr
+#endif
+
 last_VFP_context_address:
 	.word	last_VFP_context
 
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 490d9d18a7d..f1e5951dc72 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -28,7 +28,7 @@ void vfp_testing_entry(void);
 void vfp_support_entry(void);
 
 void (*vfp_vector)(void) = vfp_testing_entry;
-union vfp_state *last_VFP_context;
+union vfp_state *last_VFP_context[NR_CPUS];
 
 /*
  * Dual-use variable.
@@ -41,13 +41,35 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 {
 	struct thread_info *thread = v;
 	union vfp_state *vfp;
+	__u32 cpu = thread->cpu;
 
 	if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
+		u32 fpexc = fmrx(FPEXC);
+
+#ifdef CONFIG_SMP
+		/*
+		 * On SMP, if VFP is enabled, save the old state in
+		 * case the thread migrates to a different CPU. The
+		 * restoring is done lazily.
+		 */
+		if ((fpexc & FPEXC_ENABLE) && last_VFP_context[cpu]) {
+			vfp_save_state(last_VFP_context[cpu], fpexc);
+			last_VFP_context[cpu]->hard.cpu = cpu;
+		}
+		/*
+		 * Thread migration, just force the reloading of the
+		 * state on the new CPU in case the VFP registers
+		 * contain stale data.
+		 */
+		if (thread->vfpstate.hard.cpu != cpu)
+			last_VFP_context[cpu] = NULL;
+#endif
+
 		/*
 		 * Always disable VFP so we can lazily save/restore the
 		 * old state.
 		 */
-		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
+		fmxr(FPEXC, fpexc & ~FPEXC_ENABLE);
 		return NOTIFY_DONE;
 	}
 
@@ -68,8 +90,8 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 	}
 
 	/* flush and release case: Per-thread VFP cleanup. */
-	if (last_VFP_context == vfp)
-		last_VFP_context = NULL;
+	if (last_VFP_context[cpu] == vfp)
+		last_VFP_context[cpu] = NULL;
 
 	return NOTIFY_DONE;
 }
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 61db6973755..f69bd097166 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -589,6 +589,8 @@ static int __init pl010_console_setup(struct console *co, char *options)
 	 */
 	if (co->index >= UART_NR)
 		co->index = 0;
+	if (!amba_ports[co->index])
+		return -ENODEV;
 	port = &amba_ports[co->index]->port;
 
 	if (options)
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 9a3b374b2a0..44639e71372 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -661,6 +661,8 @@ static int __init pl011_console_setup(struct console *co, char *options)
 	if (co->index >= UART_NR)
 		co->index = 0;
 	uap = amba_ports[co->index];
+	if (!uap)
+		return -ENODEV;
 
 	uap->port.uartclk = clk_get_rate(uap->clk);
 
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index ed7f7209ea5..881f886b91c 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -689,9 +689,9 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct
 	struct atmel_uart_data *data = pdev->dev.platform_data;
 
 	port->iotype	= UPIO_MEM;
-	port->flags     = UPF_BOOT_AUTOCONF;
+	port->flags	= UPF_BOOT_AUTOCONF;
 	port->ops	= &atmel_pops;
-	port->fifosize  = 1;
+	port->fifosize	= 1;
 	port->line	= pdev->id;
 	port->dev	= &pdev->dev;
 
@@ -890,7 +890,6 @@ static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state
 	if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
 		enable_irq_wake(port->irq);
 	else {
-		disable_irq_wake(port->irq);
 		uart_suspend_port(&atmel_uart, port);
 		atmel_port->suspended = 1;
 	}
@@ -907,6 +906,8 @@ static int atmel_serial_resume(struct platform_device *pdev)
 		uart_resume_port(&atmel_uart, port);
 		atmel_port->suspended = 0;
 	}
+	else
+		disable_irq_wake(port->irq);
 
 	return 0;
 }
diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h
index fe1763b2a6d..11b44360e10 100644
--- a/drivers/serial/atmel_serial.h
+++ b/drivers/serial/atmel_serial.h
@@ -106,7 +106,7 @@
 #define ATMEL_US_CSR		0x14			/* Channel Status Register */
 #define ATMEL_US_RHR		0x18			/* Receiver Holding Register */
 #define ATMEL_US_THR		0x1c			/* Transmitter Holding Register */
-#define 	ATMEL_US_SYNH		(1 << 15)		/* Transmit/Receive Sync [SAM9 only] */
+#define		ATMEL_US_SYNH		(1 << 15)		/* Transmit/Receive Sync [AT91SAM9261 only] */
 
 #define ATMEL_US_BRGR		0x20			/* Baud Rate Generator Register */
 #define		ATMEL_US_CD		(0xffff << 0)		/* Clock Divider */
diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h
index fddf256a98d..5c564ede5c5 100644
--- a/include/asm-arm/arch-at91rm9200/at91_ecc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_ecc.h
@@ -14,7 +14,7 @@
 #define AT91_ECC_H
 
 #define AT91_ECC_CR		(AT91_ECC + 0x00)	/* Control register */
-#define		AT91_ECC_RST		(1 << 0) 		/* Reset parity */
+#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
 
 #define AT91_ECC_MR		(AT91_ECC + 0x04)	/* Mode register */
 #define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
@@ -23,16 +23,16 @@
 #define			AT91_ECC_PAGESIZE_2112		(2)
 #define			AT91_ECC_PAGESIZE_4224		(3)
 
-#define AT91_ECC_SR		(AT91_ECC + 0x08) 	/* Status register */
+#define AT91_ECC_SR		(AT91_ECC + 0x08)	/* Status register */
 #define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
 #define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
 #define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
 
-#define AT91_ECC_PR		(AT91_ECC + 0x0c) 	/* Parity register */
+#define AT91_ECC_PR		(AT91_ECC + 0x0c)	/* Parity register */
 #define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
 #define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
 
-#define AT91_ECC_NPR		(AT91_ECC + 0x10) 	/* NParity register */
+#define AT91_ECC_NPR		(AT91_ECC + 0x10)	/* NParity register */
 #define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
 
 #endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h
index de8c3da74a0..c3b489d09b6 100644
--- a/include/asm-arm/arch-at91rm9200/at91_pmc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_pmc.h
@@ -61,7 +61,7 @@
 #define			AT91_PMC_CSS_PLLA		(2 << 0)
 #define			AT91_PMC_CSS_PLLB		(3 << 0)
 #define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
-#define 		AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_1			(0 << 2)
 #define			AT91_PMC_PRES_2			(1 << 2)
 #define			AT91_PMC_PRES_4			(2 << 2)
 #define			AT91_PMC_PRES_8			(3 << 2)
diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h
index ccdc52da973..237d3c40b31 100644
--- a/include/asm-arm/arch-at91rm9200/at91_rstc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_rstc.h
@@ -17,7 +17,7 @@
 #define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
 #define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
 #define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT01_RSTC_KEY		(0xff << 24)		/* KEY Password */
+#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
 
 #define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
 #define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h
index 6e5065d5626..095fe088310 100644
--- a/include/asm-arm/arch-at91rm9200/at91_rtc.h
+++ b/include/asm-arm/arch-at91rm9200/at91_rtc.h
@@ -21,21 +21,21 @@
 #define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
 #define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
 #define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
-#define 		AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
-#define 		AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
-#define 		AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
+#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
 #define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
-#define 		AT91_RTC_CALEVSEL_WEEK		(0 << 16)
-#define 		AT91_RTC_CALEVSEL_MONTH		(1 << 16)
-#define 		AT91_RTC_CALEVSEL_YEAR		(2 << 16)
+#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
+#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
+#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
 
 #define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
-#define 	AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
 
 #define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
 #define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
 #define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
-#define		AT91_RTC_HOUR 		(0x3f << 16)		/* Current Hour */
+#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
 #define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
 
 #define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h
index 4d51177efdd..c569b6a21a4 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h
@@ -274,7 +274,7 @@
 #define AT91_PD19_TPK7		(1 << 19)	/* B: ETM Trace Packet Port 7 */
 #define AT91_PD20_NPCS3		(1 << 20)	/* A: SPI Peripheral Chip Select 3 */
 #define AT91_PD20_TPK8		(1 << 20)	/* B: ETM Trace Packet Port 8 */
-#define AT91_PD21_RTS0		(1 << 21)  	/* A: USART Ready To Send 0 */
+#define AT91_PD21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
 #define AT91_PD21_TPK9		(1 << 21)	/* B: ETM Trace Packet Port 9 */
 #define AT91_PD22_RTS1		(1 << 22)	/* A: USART Ready To Send 1 */
 #define AT91_PD22_TPK10		(1 << 22)	/* B: ETM Trace Packet Port 10 */
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
index 746d973705b..78f6b4917b8 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+++ b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
@@ -58,7 +58,7 @@
 #define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
 
 #define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	 /* Chip Select 1 Assignment */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
 #define			AT91_MATRIX_CS1A_SMC		(0 << 1)
 #define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
 #define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
index 270a5dcdf1c..ec88efabbe6 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
@@ -15,7 +15,7 @@
 
 #define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
 #define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT01_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
 
 #define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
 #define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
@@ -43,8 +43,8 @@
 
 #define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
 #define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define 		AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define 		AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
 #define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
 #define			AT91_MATRIX_CS3A_SMC		(0 << 3)
 #define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
index 7d94968b5d5..972e7531c7f 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
@@ -33,14 +33,14 @@
 #define			AT91_SDRAMC_NC_9	(1 << 0)
 #define			AT91_SDRAMC_NC_10	(2 << 0)
 #define			AT91_SDRAMC_NC_11	(3 << 0)
-#define 	AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
 #define			AT91_SDRAMC_NR_11	(0 << 2)
 #define			AT91_SDRAMC_NR_12	(1 << 2)
 #define			AT91_SDRAMC_NR_13	(2 << 2)
-#define 	AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
 #define			AT91_SDRAMC_NB_2	(0 << 4)
-#define 		AT91_SDRAMC_NB_4	(1 << 4)
-#define 	AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
 #define			AT91_SDRAMC_CAS_1	(1 << 5)
 #define			AT91_SDRAMC_CAS_2	(2 << 5)
 #define			AT91_SDRAMC_CAS_3	(3 << 5)
@@ -110,10 +110,10 @@
 #define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
 #define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
 #define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  5)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 5)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 5)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 5)
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
 #define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
 #define			AT91_SMC_BAT_SELECT		(0 << 8)
 #define			AT91_SMC_BAT_WRITE		(1 << 8)
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index b2893e32a23..eae91694edc 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -52,10 +52,10 @@
 /* general configuration options */
 
 #define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)
+#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
 #define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
 #define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
-#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* not available on A */
+#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
 #define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
 
 /* register address for the GPIO registers.
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
index 375dca50364..e4d82341f7b 100644
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ b/include/asm-arm/arch-s3c2410/regs-mem.h
@@ -133,10 +133,10 @@
 #define S3C2410_BANKCON_SDRAM		(0x3 << 15)
 
 /* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trdc1      (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trdc2      (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trdc3      (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trdc4      (0x03 << 4)
+#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
 
 /* CAS pulse width */
 #define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
@@ -153,9 +153,9 @@
 #define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
 
 /* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trdc2		(0x00 << 2)
-#define S3C2410_BANKCON_Trdc3		(0x01 << 2)
-#define S3C2410_BANKCON_Trdc4		(0x02 << 2)
+#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
+#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
+#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
 
 /* control column address select */
 #define S3C2410_BANKCON_SCANb8		(0x00 << 0)
diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h
index 6af4e6bd129..f31cda5a55e 100644
--- a/include/asm-arm/fpstate.h
+++ b/include/asm-arm/fpstate.h
@@ -35,6 +35,9 @@ struct vfp_hard_struct {
 	 */
 	__u32 fpinst;
 	__u32 fpinst2;
+#ifdef CONFIG_SMP
+	__u32 cpu;
+#endif
 };
 
 union vfp_state {