Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (90 commits) jffs2: Fix long-standing bug with symlink garbage collection. mtd: OneNAND: Fix test of unsigned in onenand_otp_walk() mtd: cfi_cmdset_0002, fix lock imbalance Revert "mtd: move mxcnd_remove to .exit.text" mtd: m25p80: add support for Macronix MX25L4005A kmsg_dump: fix build for CONFIG_PRINTK=n mtd: nandsim: add support for 4KiB pages mtd: mtdoops: refactor as a kmsg_dumper mtd: mtdoops: make record size configurable mtd: mtdoops: limit the maximum mtd partition size mtd: mtdoops: keep track of used/unused pages in an array mtd: mtdoops: several minor cleanups core: Add kernel message dumper to call on oopses and panics mtd: add ARM pismo support mtd: pxa3xx_nand: Fix PIO data transfer mtd: nand: fix multi-chip suspend problem mtd: add support for switching old SST chips into QRY mode mtd: fix M29W800D dev_id and uaddr mtd: don't use PF_MEMALLOC mtd: Add bad block table overrides to Davinci NAND driver ... Fixed up conflicts (mostly trivial) in drivers/mtd/devices/m25p80.c drivers/mtd/maps/pcmciamtd.c drivers/mtd/nand/pxa3xx_nand.c kernel/printk.c
author: Linus Torvalds <torvalds@linux-foundation.org> 2009-12-16 10:23:43 -0800
committer: Linus Torvalds <torvalds@linux-foundation.org> 2009-12-16 10:23:43 -0800
commit: 60d9aa758c00f20ade0cb1951f6a934f628dd2d7 (patch)
tree: e3bdfa4ec0d3f9a29a822810b8b9188c7d613cbd
parent: b2adf0cbec4cf0934c63f48f893e0cebde380d0c (diff)
parent: 2e16cfca6e17ae37ae21feca080a6f2eca9087dc (diff)
61 files changed, 3606 insertions, 1736 deletions
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index fbe6fa02c88..53dd2a9eecf 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -70,9 +70,19 @@ static struct ctl_table bcmring_sysctl_reboot[] = {
 	{}
 };
 
+static struct resource nand_resource[] = {
+	[0] = {
+		.start = MM_ADDR_IO_NAND,
+		.end = MM_ADDR_IO_NAND + 0x1000 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
 static struct platform_device nand_device = {
 	.name = "bcm-nand",
 	.id = -1,
+	.resource = nand_resource,
+	.num_resources	= ARRAY_SIZE(nand_resource),
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h
new file mode 100644
index 00000000000..387376ffb56
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h
@@ -0,0 +1,66 @@
+/*****************************************************************************
+* Copyright 2001 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  REG_NAND.h
+*
+*  PURPOSE:
+*
+*     This file contains definitions for the nand registers:
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(__ASM_ARCH_REG_NAND_H)
+#define __ASM_ARCH_REG_NAND_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/reg.h>
+#include <mach/reg_umi.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+#define HW_NAND_BASE       MM_IO_BASE_NAND	/* NAND Flash */
+
+/* DMA accesses by the bootstrap need hard nonvirtual addresses */
+#define REG_NAND_CMD            __REG16(HW_NAND_BASE + 0)
+#define REG_NAND_ADDR           __REG16(HW_NAND_BASE + 4)
+
+#define REG_NAND_PHYS_DATA16   (HW_NAND_BASE + 8)
+#define REG_NAND_PHYS_DATA8    (HW_NAND_BASE + 8)
+#define REG_NAND_DATA16         __REG16(REG_NAND_PHYS_DATA16)
+#define REG_NAND_DATA8          __REG8(REG_NAND_PHYS_DATA8)
+
+/* use appropriate offset to make sure it start at the 1K boundary */
+#define REG_NAND_PHYS_DATA_DMA   (HW_NAND_BASE + 0x400)
+#define REG_NAND_DATA_DMA         __REG32(REG_NAND_PHYS_DATA_DMA)
+
+/* Linux DMA requires physical address of the data register */
+#define REG_NAND_DATA16_PADDR    HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16)
+#define REG_NAND_DATA8_PADDR     HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8)
+#define REG_NAND_DATA_PADDR      HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA)
+
+#define NAND_BUS_16BIT()        (0)
+#define NAND_BUS_8BIT()         (!NAND_BUS_16BIT())
+
+/* Register offsets */
+#define REG_NAND_CMD_OFFSET     (0)
+#define REG_NAND_ADDR_OFFSET    (4)
+#define REG_NAND_DATA8_OFFSET   (8)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h
new file mode 100644
index 00000000000..06a355481ea
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h
@@ -0,0 +1,237 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  REG_UMI.h
+*
+*  PURPOSE:
+*
+*     This file contains definitions for the nand registers:
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(__ASM_ARCH_REG_UMI_H)
+#define __ASM_ARCH_REG_UMI_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* Unified Memory Interface Ctrl Register */
+#define HW_UMI_BASE       MM_IO_BASE_UMI
+
+/* Flash bank 0 timing and control register */
+#define REG_UMI_FLASH0_TCR         __REG32(HW_UMI_BASE  + 0x00)
+/* Flash bank 1 timing and control register */
+#define REG_UMI_FLASH1_TCR         __REG32(HW_UMI_BASE  + 0x04)
+/* Flash bank 2 timing and control register */
+#define REG_UMI_FLASH2_TCR         __REG32(HW_UMI_BASE  + 0x08)
+/* MMD interface and control register */
+#define REG_UMI_MMD_ICR            __REG32(HW_UMI_BASE  + 0x0c)
+/* NAND timing and control register */
+#define REG_UMI_NAND_TCR           __REG32(HW_UMI_BASE  + 0x18)
+/* NAND ready/chip select register */
+#define REG_UMI_NAND_RCSR          __REG32(HW_UMI_BASE  + 0x1c)
+/* NAND ECC control & status register */
+#define REG_UMI_NAND_ECC_CSR       __REG32(HW_UMI_BASE  + 0x20)
+/* NAND ECC data register XXB2B1B0 */
+#define REG_UMI_NAND_ECC_DATA      __REG32(HW_UMI_BASE  + 0x24)
+/* BCH ECC Parameter N */
+#define REG_UMI_BCH_N              __REG32(HW_UMI_BASE  + 0x40)
+/* BCH ECC Parameter T */
+#define REG_UMI_BCH_K              __REG32(HW_UMI_BASE  + 0x44)
+/* BCH ECC Parameter K */
+#define REG_UMI_BCH_T              __REG32(HW_UMI_BASE  + 0x48)
+/* BCH ECC Contro Status */
+#define REG_UMI_BCH_CTRL_STATUS    __REG32(HW_UMI_BASE  + 0x4C)
+/* BCH WR ECC 31:0 */
+#define REG_UMI_BCH_WR_ECC_0       __REG32(HW_UMI_BASE  + 0x50)
+/* BCH WR ECC 63:32 */
+#define REG_UMI_BCH_WR_ECC_1       __REG32(HW_UMI_BASE  + 0x54)
+/* BCH WR ECC 95:64 */
+#define REG_UMI_BCH_WR_ECC_2       __REG32(HW_UMI_BASE  + 0x58)
+/* BCH WR ECC 127:96 */
+#define REG_UMI_BCH_WR_ECC_3       __REG32(HW_UMI_BASE  + 0x5c)
+/* BCH WR ECC 155:128 */
+#define REG_UMI_BCH_WR_ECC_4       __REG32(HW_UMI_BASE  + 0x60)
+/* BCH Read Error Location 1,0 */
+#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE  + 0x64)
+/* BCH Read Error Location 3,2 */
+#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE  + 0x68)
+/* BCH Read Error Location 5,4 */
+#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE  + 0x6c)
+/* BCH Read Error Location 7,6 */
+#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE  + 0x70)
+/* BCH Read Error Location 9,8 */
+#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE  + 0x74)
+/* BCH Read Error Location 11,10 */
+#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE  + 0x78)
+
+/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */
+/* Enable wait pin during burst write or read */
+#define REG_UMI_TCR_WAITEN              0x80000000
+/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */
+#define REG_UMI_TCR_LOWFREQ             0x40000000
+/* 1=synch write, 0=async write */
+#define REG_UMI_TCR_MEMTYPE_SYNCWRITE   0x20000000
+/* 1=synch read, 0=async read */
+#define REG_UMI_TCR_MEMTYPE_SYNCREAD    0x10000000
+/* 1=page mode read, 0=normal mode read */
+#define REG_UMI_TCR_MEMTYPE_PAGEREAD    0x08000000
+/* page size/burst size (wrap only) */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK   0x07000000
+/* 4 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_4      0x00000000
+/* 8 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_8      0x01000000
+/* 16 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_16     0x02000000
+/* 32 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_32     0x03000000
+/* 64 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_64     0x04000000
+/* 128 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_128    0x05000000
+/* 256 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_256    0x06000000
+/* 512 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_512    0x07000000
+/* Page read access cycle / Burst write latency (n+2 / n+1) */
+#define REG_UMI_TCR_TPRC_TWLC_MASK      0x00f80000
+/* Bus turnaround cycle (n) */
+#define REG_UMI_TCR_TBTA_MASK           0x00070000
+/* Write pulse width cycle (n+1) */
+#define REG_UMI_TCR_TWP_MASK            0x0000f800
+/* Write recovery cycle (n+1) */
+#define REG_UMI_TCR_TWR_MASK            0x00000600
+/* Write address setup cycle (n+1) */
+#define REG_UMI_TCR_TAS_MASK            0x00000180
+/* Output enable delay cycle (n) */
+#define REG_UMI_TCR_TOE_MASK            0x00000060
+/* Read access cycle / Burst read latency (n+2 / n+1) */
+#define REG_UMI_TCR_TRC_TLC_MASK        0x0000001f
+
+/* REG_UMI_MMD_ICR bits */
+/* Flash write protection pin control */
+#define REG_UMI_MMD_ICR_FLASH_WP            0x8000
+/* Extend hold time for sram0, sram1 csn (39 MHz operation) */
+#define REG_UMI_MMD_ICR_XHCS                0x4000
+/* Enable SDRAM 2 interface control */
+#define REG_UMI_MMD_ICR_SDRAM2EN            0x2000
+/* Enable merge of flash banks 0/1 to 512 MBit bank */
+#define REG_UMI_MMD_ICR_INST512             0x1000
+/* Enable merge of flash banks 1/2 to 512 MBit bank */
+#define REG_UMI_MMD_ICR_DATA512             0x0800
+/* Enable SDRAM interface control */
+#define REG_UMI_MMD_ICR_SDRAMEN             0x0400
+/* Polarity of busy state of Burst Wait Signal */
+#define REG_UMI_MMD_ICR_WAITPOL             0x0200
+/* Enable burst clock stopped when not accessing external burst flash/sram */
+#define REG_UMI_MMD_ICR_BCLKSTOP            0x0100
+/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */
+#define REG_UMI_MMD_ICR_PERI1EN             0x0080
+/* Enable the peri2_csn to replace sdram_csn */
+#define REG_UMI_MMD_ICR_PERI2EN             0x0040
+/* Enable the peri3_csn to replace sdram2_csn */
+#define REG_UMI_MMD_ICR_PERI3EN             0x0020
+/* Enable sram bank1 for H/W controlled MRS */
+#define REG_UMI_MMD_ICR_MRSB1               0x0010
+/* Enable sram bank0 for H/W controlled MRS */
+#define REG_UMI_MMD_ICR_MRSB0               0x0008
+/* Polarity for assert3ed state of H/W controlled MRS */
+#define REG_UMI_MMD_ICR_MRSPOL              0x0004
+/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */
+/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */
+#define REG_UMI_MMD_ICR_MRSMODE             0x0002
+/* MRS state for S/W controlled mode */
+#define REG_UMI_MMD_ICR_MRSSTATE            0x0001
+
+/* REG_UMI_NAND_TCR bits */
+/* Enable software to control CS */
+#define REG_UMI_NAND_TCR_CS_SWCTRL          0x80000000
+/* 16-bit nand wordsize if set */
+#define REG_UMI_NAND_TCR_WORD16             0x40000000
+/* Bus turnaround cycle (n) */
+#define REG_UMI_NAND_TCR_TBTA_MASK          0x00070000
+/* Write pulse width cycle (n+1) */
+#define REG_UMI_NAND_TCR_TWP_MASK           0x0000f800
+/* Write recovery cycle (n+1) */
+#define REG_UMI_NAND_TCR_TWR_MASK           0x00000600
+/* Write address setup cycle (n+1) */
+#define REG_UMI_NAND_TCR_TAS_MASK           0x00000180
+/* Output enable delay cycle (n) */
+#define REG_UMI_NAND_TCR_TOE_MASK           0x00000060
+/* Read access cycle (n+2) */
+#define REG_UMI_NAND_TCR_TRC_TLC_MASK       0x0000001f
+
+/* REG_UMI_NAND_RCSR bits */
+/* Status: Ready=1, Busy=0 */
+#define REG_UMI_NAND_RCSR_RDY               0x02
+/* Keep CS asserted during operation */
+#define REG_UMI_NAND_RCSR_CS_ASSERTED       0x01
+
+/* REG_UMI_NAND_ECC_CSR bits */
+/* Interrupt status - read-only */
+#define REG_UMI_NAND_ECC_CSR_NANDINT        0x80000000
+/* Read: Status of ECC done, Write: clear ECC interrupt */
+#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW     0x00800000
+/* Read: Status of R/B, Write: clear R/B interrupt */
+#define REG_UMI_NAND_ECC_CSR_RBINT_RAW      0x00400000
+/* 1 = Enable ECC Interrupt */
+#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE  0x00008000
+/* 1 = Assert interrupt at rising edge of R/B_ */
+#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE   0x00004000
+/* Calculate ECC by 0=512 bytes, 1=256 bytes */
+#define REG_UMI_NAND_ECC_CSR_256BYTE        0x00000080
+/* Enable ECC in hardware */
+#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE     0x00000001
+
+/* REG_UMI_BCH_CTRL_STATUS bits */
+/* Shift to Indicate Number of correctable errors detected */
+#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20
+/* Indicate Number of correctable errors detected */
+#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000
+/* Indicate Errors detected during read but uncorrectable */
+#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR    0x00080000
+/* Indicate Errors detected during read and are correctable */
+#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR      0x00040000
+/* Flag indicates BCH's ECC status of read process are valid */
+#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID  0x00020000
+/* Flag indicates BCH's ECC status of write process are valid */
+#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID  0x00010000
+/* Pause ECC calculation */
+#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010
+/* Enable Interrupt */
+#define REG_UMI_BCH_CTRL_STATUS_INT_EN        0x00000004
+/* Enable ECC during read */
+#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN     0x00000002
+/* Enable ECC during write */
+#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN     0x00000001
+/* Mask for location */
+#define REG_UMI_BCH_ERR_LOC_MASK              0x00001FFF
+/* location within a byte */
+#define REG_UMI_BCH_ERR_LOC_BYTE              0x00000007
+/* location within a word */
+#define REG_UMI_BCH_ERR_LOC_WORD              0x00000018
+/* location within a page (512 byte) */
+#define REG_UMI_BCH_ERR_LOC_PAGE              0x00001FE0
+#define REG_UMI_BCH_ERR_LOC_ADDR(index)     (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
index b520c4b5678..b2ad8090bd1 100644
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ b/arch/arm/mach-davinci/include/mach/nand.h
@@ -79,6 +79,10 @@ struct davinci_nand_pdata {		/* platform_data */
 
 	/* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
 	unsigned		options;
+
+	/* Main and mirror bbt descriptor overrides */
+	struct nand_bbt_descr	*bbt_td;
+	struct nand_bbt_descr	*bbt_md;
 };
 
 #endif	/* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 116394484e7..9438bf6613a 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
+#include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <asm/sizes.h>
@@ -149,7 +150,7 @@ static struct mtd_partition nhk8815_onenand_partitions[] = {
 	}
 };
 
-static struct flash_platform_data nhk8815_onenand_data = {
+static struct onenand_platform_data nhk8815_onenand_data = {
 	.parts		= nhk8815_onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
 };
@@ -163,7 +164,7 @@ static struct resource nhk8815_onenand_resource[] = {
 };
 
 static struct platform_device nhk8815_onenand_device = {
-	.name		= "onenand",
+	.name		= "onenand-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &nhk8815_onenand_data,
@@ -174,10 +175,10 @@ static struct platform_device nhk8815_onenand_device = {
 
 static void __init nhk8815_onenand_init(void)
 {
-#ifdef CONFIG_ONENAND
+#ifdef CONFIG_MTD_ONENAND
        /* Set up SMCS0 for OneNand */
-       writel(0x000030db, FSMC_BCR0);
-       writel(0x02100551, FSMC_BTR0);
+	writel(0x000030db, FSMC_BCR(0));
+	writel(0x02100551, FSMC_BTR(0));
 #endif
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 2b972df22d1..5d2d21d414e 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -22,6 +22,7 @@
 
 struct mxc_nand_platform_data {
 	int width;	/* data bus width in bytes */
-	int hw_ecc;	/* 0 if supress hardware ECC */
+	int hw_ecc:1;	/* 0 if supress hardware ECC */
+	int flash_bbt:1; /* set to 1 to use a flash based bbt */
 };
 #endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 06598597841..226147b7e02 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -17,6 +17,7 @@
  *			Setting this flag will allow the kernel to
  *			look for it at boot time and also skip the NAND
  *			scan.
+ * @options:		Default value to set into 'struct nand_chip' options.
  * @nr_chips:		Number of chips in this set
  * @nr_partitions:	Number of partitions pointed to by @partitions
  * @name:		Name of set (optional)
@@ -31,6 +32,7 @@ struct s3c2410_nand_set {
 	unsigned int		disable_ecc:1;
 	unsigned int		flash_bbt:1;
 
+	unsigned int		options;
 	int			nr_chips;
 	int			nr_partitions;
 	char			*name;
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index e7563a9872d..5fbf29e1e64 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -43,15 +43,17 @@
 // debugging, turns off buffer write mode if set to 1
 #define FORCE_WORD_WRITE 0
 
-#define MANUFACTURER_INTEL	0x0089
+/* Intel chips */
 #define I82802AB	0x00ad
 #define I82802AC	0x00ac
 #define PF38F4476	0x881c
-#define MANUFACTURER_ST         0x0020
+/* STMicroelectronics chips */
 #define M50LPW080       0x002F
 #define M50FLW080A	0x0080
 #define M50FLW080B	0x0081
+/* Atmel chips */
 #define AT49BV640D	0x02de
+#define AT49BV640DT	0x02db
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -199,6 +201,16 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
 	cfi->cfiq->BufWriteTimeoutMax = 0;
 }
 
+static void fixup_at49bv640dx_lock(struct mtd_info *mtd, void *param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
+
+	cfip->FeatureSupport |= (1 << 5);
+	mtd->flags |= MTD_POWERUP_LOCK;
+}
+
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
 static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
@@ -283,6 +295,8 @@ static void fixup_unlock_powerup_lock(struct mtd_info *mtd, void *param)
 
 static struct cfi_fixup cfi_fixup_table[] = {
 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+	{ CFI_MFR_ATMEL, AT49BV640D, fixup_at49bv640dx_lock, NULL },
+	{ CFI_MFR_ATMEL, AT49BV640DT, fixup_at49bv640dx_lock, NULL },
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
 #endif
@@ -294,16 +308,16 @@ static struct cfi_fixup cfi_fixup_table[] = {
 #endif
 	{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct, NULL },
 	{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb, NULL },
-	{ MANUFACTURER_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock, NULL, },
+	{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock, NULL, },
 	{ 0, 0, NULL, NULL }
 };
 
 static struct cfi_fixup jedec_fixup_table[] = {
-	{ MANUFACTURER_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
-	{ MANUFACTURER_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
-	{ MANUFACTURER_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
-	{ MANUFACTURER_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
-	{ MANUFACTURER_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
+	{ CFI_MFR_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
 	{ 0, 0, NULL, NULL }
 };
 static struct cfi_fixup fixup_table[] = {
@@ -319,7 +333,7 @@ static struct cfi_fixup fixup_table[] = {
 static void cfi_fixup_major_minor(struct cfi_private *cfi,
 						struct cfi_pri_intelext *extp)
 {
-	if (cfi->mfr == MANUFACTURER_INTEL &&
+	if (cfi->mfr == CFI_MFR_INTEL &&
 			cfi->id == PF38F4476 && extp->MinorVersion == '3')
 		extp->MinorVersion = '1';
 }
@@ -2235,7 +2249,7 @@ static int cfi_intelext_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
 
 	/* Some chips have OTP located in the _top_ partition only.
 	   For example: Intel 28F256L18T (T means top-parameter device) */
-	if (cfi->mfr == MANUFACTURER_INTEL) {
+	if (cfi->mfr == CFI_MFR_INTEL) {
 		switch (cfi->id) {
 		case 0x880b:
 		case 0x880c:
@@ -2564,6 +2578,7 @@ static int cfi_intelext_reset(struct mtd_info *mtd)
 		if (!ret) {
 			map_write(map, CMD(0xff), chip->start);
 			chip->state = FL_SHUTDOWN;
+			put_chip(map, chip, chip->start);
 		}
 		spin_unlock(chip->mutex);
 	}
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 94bb61e1904..f3600e8d538 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -490,10 +490,6 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 	}
 #endif
 
-	/* FIXME: erase-suspend-program is broken.  See
-	   http://lists.infradead.org/pipermail/linux-mtd/2003-December/009001.html */
-	printk(KERN_NOTICE "cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.\n");
-
 	__module_get(THIS_MODULE);
 	return mtd;
 
@@ -573,7 +569,6 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 
 			if (time_after(jiffies, timeo)) {
 				printk(KERN_ERR "Waiting for chip to be ready timed out.\n");
-				spin_unlock(chip->mutex);
 				return -EIO;
 			}
 			spin_unlock(chip->mutex);
@@ -589,15 +584,9 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		return 0;
 
 	case FL_ERASING:
-		if (mode == FL_WRITING) /* FIXME: Erase-suspend-program appears broken. */
-			goto sleep;
-
-		if (!(   mode == FL_READY
-		      || mode == FL_POINT
-		      || !cfip
-		      || (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))
-		      || (mode == FL_WRITING && (cfip->EraseSuspend & 0x1)
-		    )))
+		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
+		    !(mode == FL_READY || mode == FL_POINT ||
+		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
 			goto sleep;
 
 		/* We could check to see if we're trying to access the sector
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index c5a84fda541..ca584d0380b 100755
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -71,6 +71,13 @@ int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
 	cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
 	if (cfi_qry_present(map, base, cfi))
 		return 1;
+	/* some old SST chips, e.g. 39VF160x/39VF320x */
+	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
+	cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
+	if (cfi_qry_present(map, base, cfi))
+		return 1;
 	/* QRY not found */
 	return 0;
 }
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 736a3be265f..1bec5e1ce6a 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -142,8 +142,8 @@
 
 /* ST - www.st.com */
 #define M29F800AB	0x0058
-#define M29W800DT	0x00D7
-#define M29W800DB	0x005B
+#define M29W800DT	0x22D7
+#define M29W800DB	0x225B
 #define M29W400DT	0x00EE
 #define M29W400DB	0x00EF
 #define M29W160DT	0x22C4
@@ -1575,7 +1575,7 @@ static const struct amd_flash_info jedec_table[] = {
 		.dev_id		= M29W800DT,
 		.name		= "ST M29W800DT",
 		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
 		.dev_size	= SIZE_1MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 4,
@@ -1590,7 +1590,7 @@ static const struct amd_flash_info jedec_table[] = {
 		.dev_id		= M29W800DB,
 		.name		= "ST M29W800DB",
 		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
 		.dev_size	= SIZE_1MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 4,
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 4c19269de91..f3f4768d6e1 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -22,6 +22,7 @@
 #include <linux/mutex.h>
 #include <linux/math64.h>
 #include <linux/sched.h>
+#include <linux/mod_devicetable.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -29,9 +30,6 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-
-#define FLASH_PAGESIZE		256
-
 /* Flash opcodes. */
 #define	OPCODE_WREN		0x06	/* Write enable */
 #define	OPCODE_RDSR		0x05	/* Read status register */
@@ -61,7 +59,7 @@
 
 /* Define max times to check status register before we give up. */
 #define	MAX_READY_WAIT_JIFFIES	(40 * HZ)	/* M25P16 specs 40s max chip erase */
-#define	CMD_SIZE		4
+#define	MAX_CMD_SIZE		4
 
 #ifdef CONFIG_M25PXX_USE_FAST_READ
 #define OPCODE_READ 	OPCODE_FAST_READ
@@ -78,8 +76,10 @@ struct m25p {
 	struct mutex		lock;
 	struct mtd_info		mtd;
 	unsigned		partitioned:1;
+	u16			page_size;
+	u16			addr_width;
 	u8			erase_opcode;
-	u8			command[CMD_SIZE + FAST_READ_DUMMY_BYTE];
+	u8			*command;
 };
 
 static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
@@ -198,6 +198,19 @@ static int erase_chip(struct m25p *flash)
 	return 0;
 }
 
+static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd)
+{
+	/* opcode is in cmd[0] */
+	cmd[1] = addr >> (flash->addr_width * 8 -  8);
+	cmd[2] = addr >> (flash->addr_width * 8 - 16);
+	cmd[3] = addr >> (flash->addr_width * 8 - 24);
+}
+
+static int m25p_cmdsz(struct m25p *flash)
+{
+	return 1 + flash->addr_width;
+}
+
 /*
  * Erase one sector of flash memory at offset ``offset'' which is any
  * address within the sector which should be erased.
@@ -219,11 +232,9 @@ static int erase_sector(struct m25p *flash, u32 offset)
 
 	/* Set up command buffer. */
 	flash->command[0] = flash->erase_opcode;
-	flash->command[1] = offset >> 16;
-	flash->command[2] = offset >> 8;
-	flash->command[3] = offset;
+	m25p_addr2cmd(flash, offset, flash->command);
 
-	spi_write(flash->spi, flash->command, CMD_SIZE);
+	spi_write(flash->spi, flash->command, m25p_cmdsz(flash));
 
 	return 0;
 }
@@ -325,7 +336,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 	 * Should add 1 byte DUMMY_BYTE.
 	 */
 	t[0].tx_buf = flash->command;
-	t[0].len = CMD_SIZE + FAST_READ_DUMMY_BYTE;
+	t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
 	spi_message_add_tail(&t[0], &m);
 
 	t[1].rx_buf = buf;
@@ -352,13 +363,11 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 
 	/* Set up the write data buffer. */
 	flash->command[0] = OPCODE_READ;
-	flash->command[1] = from >> 16;
-	flash->command[2] = from >> 8;
-	flash->command[3] = from;
+	m25p_addr2cmd(flash, from, flash->command);
 
 	spi_sync(flash->spi, &m);
 
-	*retlen = m.actual_length - CMD_SIZE - FAST_READ_DUMMY_BYTE;
+	*retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
 
 	mutex_unlock(&flash->lock);
 
@@ -396,7 +405,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 	memset(t, 0, (sizeof t));
 
 	t[0].tx_buf = flash->command;
-	t[0].len = CMD_SIZE;
+	t[0].len = m25p_cmdsz(flash);
 	spi_message_add_tail(&t[0], &m);
 
 	t[1].tx_buf = buf;
@@ -414,41 +423,36 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 	/* Set up the opcode in the write buffer. */
 	flash->command[0] = OPCODE_PP;
-	flash->command[1] = to >> 16;
-	flash->command[2] = to >> 8;
-	flash->command[3] = to;
+	m25p_addr2cmd(flash, to, flash->command);
 
-	/* what page do we start with? */
-	page_offset = to % FLASH_PAGESIZE;
+	page_offset = to & (flash->page_size - 1);
 
 	/* do all the bytes fit onto one page? */
-	if (page_offset + len <= FLASH_PAGESIZE) {
+	if (page_offset + len <= flash->page_size) {
 		t[1].len = len;
 
 		spi_sync(flash->spi, &m);
 
-		*retlen = m.actual_length - CMD_SIZE;
+		*retlen = m.actual_length - m25p_cmdsz(flash);
 	} else {
 		u32 i;
 
 		/* the size of data remaining on the first page */
-		page_size = FLASH_PAGESIZE - page_offset;
+		page_size = flash->page_size - page_offset;
 
 		t[1].len = page_size;
 		spi_sync(flash->spi, &m);
 
-		*retlen = m.actual_length - CMD_SIZE;
+		*retlen = m.actual_length - m25p_cmdsz(flash);
 
-		/* write everything in PAGESIZE chunks */
+		/* write everything in flash->page_size chunks */
 		for (i = page_size; i < len; i += page_size) {
 			page_size = len - i;
-			if (page_size > FLASH_PAGESIZE)
-				page_size = FLASH_PAGESIZE;
+			if (page_size > flash->page_size)
+				page_size = flash->page_size;
 
 			/* write the next page to flash */
-			flash->command[1] = (to + i) >> 16;
-			flash->command[2] = (to + i) >> 8;
-			flash->command[3] = (to + i);
+			m25p_addr2cmd(flash, to + i, flash->command);
 
 			t[1].tx_buf = buf + i;
 			t[1].len = page_size;
@@ -460,7 +464,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 			spi_sync(flash->spi, &m);
 
 			if (retlen)
-				*retlen += m.actual_length - CMD_SIZE;
+				*retlen += m.actual_length - m25p_cmdsz(flash);
 		}
 	}
 
@@ -492,7 +496,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	memset(t, 0, (sizeof t));
 
 	t[0].tx_buf = flash->command;
-	t[0].len = CMD_SIZE;
+	t[0].len = m25p_cmdsz(flash);
 	spi_message_add_tail(&t[0], &m);
 
 	t[1].tx_buf = buf;
@@ -511,9 +515,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	/* Start write from odd address. */
 	if (actual) {
 		flash->command[0] = OPCODE_BP;
-		flash->command[1] = to >> 16;
-		flash->command[2] = to >> 8;
-		flash->command[3] = to;
+		m25p_addr2cmd(flash, to, flash->command);
 
 		/* write one byte. */
 		t[1].len = 1;
@@ -521,17 +523,15 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 		ret = wait_till_ready(flash);
 		if (ret)
 			goto time_out;
-		*retlen += m.actual_length - CMD_SIZE;
+		*retlen += m.actual_length - m25p_cmdsz(flash);
 	}
 	to += actual;
 
 	flash->command[0] = OPCODE_AAI_WP;
-	flash->command[1] = to >> 16;
-	flash->command[2] = to >> 8;
-	flash->command[3] = to;
+	m25p_addr2cmd(flash, to, flash->command);
 
 	/* Write out most of the data here. */
-	cmd_sz = CMD_SIZE;
+	cmd_sz = m25p_cmdsz(flash);
 	for (; actual < len - 1; actual += 2) {
 		t[0].len = cmd_sz;
 		/* write two bytes. */
@@ -555,10 +555,8 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	if (actual != len) {
 		write_enable(flash);
 		flash->command[0] = OPCODE_BP;
-		flash->command[1] = to >> 16;
-		flash->command[2] = to >> 8;
-		flash->command[3] = to;
-		t[0].len = CMD_SIZE;
+		m25p_addr2cmd(flash, to, flash->command);
+		t[0].len = m25p_cmdsz(flash);
 		t[1].len = 1;
 		t[1].tx_buf = buf + actual;
 
@@ -566,7 +564,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 		ret = wait_till_ready(flash);
 		if (ret)
 			goto time_out;
-		*retlen += m.actual_length - CMD_SIZE;
+		*retlen += m.actual_length - m25p_cmdsz(flash);
 		write_disable(flash);
 	}
 
@@ -582,8 +580,6 @@ time_out:
  */
 
 struct flash_info {
-	char		*name;
-
 	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
 	 * a high byte of zero plus three data bytes: the manufacturer id,
 	 * then a two byte device id.
@@ -597,87 +593,119 @@ struct flash_info {
 	unsigned	sector_size;
 	u16		n_sectors;
 
+	u16		page_size;
+	u16		addr_width;
+
 	u16		flags;
 #define	SECT_4K		0x01		/* OPCODE_BE_4K works uniformly */
+#define	M25P_NO_ERASE	0x02		/* No erase command needed */
 };
 
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+	((kernel_ulong_t)&(struct flash_info) {				\
+		.jedec_id = (_jedec_id),				\
+		.ext_id = (_ext_id),					\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = 256,					\
+		.addr_width = 3,					\
+		.flags = (_flags),					\
+	})
+
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width)	\
+	((kernel_ulong_t)&(struct flash_info) {				\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = (_page_size),				\
+		.addr_width = (_addr_width),				\
+		.flags = M25P_NO_ERASE,					\
+	})
 
 /* NOTE: double check command sets and memory organization when you add
  * more flash chips.  This current list focusses on newer chips, which
  * have been converging on command sets which including JEDEC ID.
  */
-static struct flash_info __devinitdata m25p_data [] = {
-
+static const struct spi_device_id m25p_ids[] = {
 	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-	{ "at25fs010",  0x1f6601, 0, 32 * 1024, 4, SECT_4K, },
-	{ "at25fs040",  0x1f6604, 0, 64 * 1024, 8, SECT_4K, },
+	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
+	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
 
-	{ "at25df041a", 0x1f4401, 0, 64 * 1024, 8, SECT_4K, },
-	{ "at25df641",  0x1f4800, 0, 64 * 1024, 128, SECT_4K, },
+	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
+	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
 
-	{ "at26f004",   0x1f0400, 0, 64 * 1024, 8, SECT_4K, },
-	{ "at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K, },
-	{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
-	{ "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
+	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
+	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
+	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
+	{ "at26df321",  INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
 
 	/* Macronix */
-	{ "mx25l3205d", 0xc22016, 0, 64 * 1024, 64, },
-	{ "mx25l6405d", 0xc22017, 0, 64 * 1024, 128, },
-	{ "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, },
-	{ "mx25l12855e", 0xc22618, 0, 64 * 1024, 256, },
+	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, 0) },
+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
 
 	/* Spansion -- single (large) sector size only, at least
 	 * for the chips listed here (without boot sectors).
 	 */
-	{ "s25sl004a", 0x010212, 0, 64 * 1024, 8, },
-	{ "s25sl008a", 0x010213, 0, 64 * 1024, 16, },
-	{ "s25sl016a", 0x010214, 0, 64 * 1024, 32, },
-	{ "s25sl032a", 0x010215, 0, 64 * 1024, 64, },
-	{ "s25sl064a", 0x010216, 0, 64 * 1024, 128, },
-	{ "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
-	{ "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, },
-	{ "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, },
-	{ "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, },
+	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
+	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
+	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
+	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
+	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
+	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
+	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
+	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, 0) },
+	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, 0) },
 
 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
-	{ "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, },
-	{ "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, },
-	{ "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, },
-	{ "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, },
-	{ "sst25wf512",  0xbf2501, 0, 64 * 1024, 1, SECT_4K, },
-	{ "sst25wf010",  0xbf2502, 0, 64 * 1024, 2, SECT_4K, },
-	{ "sst25wf020",  0xbf2503, 0, 64 * 1024, 4, SECT_4K, },
-	{ "sst25wf040",  0xbf2504, 0, 64 * 1024, 8, SECT_4K, },
+	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K) },
+	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K) },
+	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K) },
+	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K) },
+	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K) },
+	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K) },
+	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K) },
+	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K) },
 
 	/* ST Microelectronics -- newer production may have feature updates */
-	{ "m25p05",  0x202010,  0, 32 * 1024, 2, },
-	{ "m25p10",  0x202011,  0, 32 * 1024, 4, },
-	{ "m25p20",  0x202012,  0, 64 * 1024, 4, },
-	{ "m25p40",  0x202013,  0, 64 * 1024, 8, },
-	{ "m25p80",         0,  0, 64 * 1024, 16, },
-	{ "m25p16",  0x202015,  0, 64 * 1024, 32, },
-	{ "m25p32",  0x202016,  0, 64 * 1024, 64, },
-	{ "m25p64",  0x202017,  0, 64 * 1024, 128, },
-	{ "m25p128", 0x202018, 0, 256 * 1024, 64, },
-
-	{ "m45pe10", 0x204011,  0, 64 * 1024, 2, },
-	{ "m45pe80", 0x204014,  0, 64 * 1024, 16, },
-	{ "m45pe16", 0x204015,  0, 64 * 1024, 32, },
-
-	{ "m25pe80", 0x208014,  0, 64 * 1024, 16, },
-	{ "m25pe16", 0x208015,  0, 64 * 1024, 32, SECT_4K, },
+	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
+	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
+	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
+	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
+	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
+	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
+	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
+	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
+	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
+
+	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
+	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
+	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
+
+	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
+	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
 
 	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-	{ "w25x10", 0xef3011, 0, 64 * 1024, 2, SECT_4K, },
-	{ "w25x20", 0xef3012, 0, 64 * 1024, 4, SECT_4K, },
-	{ "w25x40", 0xef3013, 0, 64 * 1024, 8, SECT_4K, },
-	{ "w25x80", 0xef3014, 0, 64 * 1024, 16, SECT_4K, },
-	{ "w25x16", 0xef3015, 0, 64 * 1024, 32, SECT_4K, },
-	{ "w25x32", 0xef3016, 0, 64 * 1024, 64, SECT_4K, },
-	{ "w25x64", 0xef3017, 0, 64 * 1024, 128, SECT_4K, },
+	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
+	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
+	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
+	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
+	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
+	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+
+	/* Catalyst / On Semiconductor -- non-JEDEC */
+	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1) },
+	{ "cat25c03", CAT25_INFO(  32, 8, 16, 2) },
+	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2) },
+	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2) },
+	{ "cat25128", CAT25_INFO(2048, 8, 64, 2) },
+	{ },
 };
+MODULE_DEVICE_TABLE(spi, m25p_ids);
 
-static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
 {
 	int			tmp;
 	u8			code = OPCODE_RDID;
@@ -702,18 +730,24 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 	jedec = jedec << 8;
 	jedec |= id[2];
 
+	/*
+	 * Some chips (like Numonyx M25P80) have JEDEC and non-JEDEC variants,
+	 * which depend on technology process. Officially RDID command doesn't
+	 * exist for non-JEDEC chips, but for compatibility they return ID 0.
+	 */
+	if (jedec == 0)
+		return NULL;
+
 	ext_jedec = id[3] << 8 | id[4];
 
-	for (tmp = 0, info = m25p_data;
-			tmp < ARRAY_SIZE(m25p_data);
-			tmp++, info++) {
+	for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
+		info = (void *)m25p_ids[tmp].driver_data;
 		if (info->jedec_id == jedec) {
 			if (info->ext_id != 0 && info->ext_id != ext_jedec)
 				continue;
-			return info;
+			return &m25p_ids[tmp];
 		}
 	}
-	dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
 	return NULL;
 }
 
@@ -725,6 +759,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
  */
 static int __devinit m25p_probe(struct spi_device *spi)
 {
+	const struct spi_device_id	*id = spi_get_device_id(spi);
 	struct flash_platform_data	*data;
 	struct m25p			*flash;
 	struct flash_info		*info;
@@ -737,50 +772,65 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	 */
 	data = spi->dev.platform_data;
 	if (data && data->type) {
-		for (i = 0, info = m25p_data;
-				i < ARRAY_SIZE(m25p_data);
-				i++, info++) {
-			if (strcmp(data->type, info->name) == 0)
-				break;
-		}
+		const struct spi_device_id *plat_id;
 
-		/* unrecognized chip? */
-		if (i == ARRAY_SIZE(m25p_data)) {
-			DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n",
-					dev_name(&spi->dev), data->type);
-			info = NULL;
-
-		/* recognized; is that chip really what's there? */
-		} else if (info->jedec_id) {
-			struct flash_info	*chip = jedec_probe(spi);
-
-			if (!chip || chip != info) {
-				dev_warn(&spi->dev, "found %s, expected %s\n",
-						chip ? chip->name : "UNKNOWN",
-						info->name);
-				info = NULL;
-			}
+		for (i = 0; i < ARRAY_SIZE(m25p_ids) - 1; i++) {
+			plat_id = &m25p_ids[i];
+			if (strcmp(data->type, plat_id->name))
+				continue;
+			break;
 		}
-	} else
-		info = jedec_probe(spi);
 
-	if (!info)
-		return -ENODEV;
+		if (plat_id)
+			id = plat_id;
+		else
+			dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
+	}
+
+	info = (void *)id->driver_data;
+
+	if (info->jedec_id) {
+		const struct spi_device_id *jid;
+
+		jid = jedec_probe(spi);
+		if (!jid) {
+			dev_info(&spi->dev, "non-JEDEC variant of %s\n",
+				 id->name);
+		} else if (jid != id) {
+			/*
+			 * JEDEC knows better, so overwrite platform ID. We
+			 * can't trust partitions any longer, but we'll let
+			 * mtd apply them anyway, since some partitions may be
+			 * marked read-only, and we don't want to lose that
+			 * information, even if it's not 100% accurate.
+			 */
+			dev_warn(&spi->dev, "found %s, expected %s\n",
+				 jid->name, id->name);
+			id = jid;
+			info = (void *)jid->driver_data;
+		}
+	}
 
 	flash = kzalloc(sizeof *flash, GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;
+	flash->command = kmalloc(MAX_CMD_SIZE + FAST_READ_DUMMY_BYTE, GFP_KERNEL);
+	if (!flash->command) {
+		kfree(flash);
+		return -ENOMEM;
+	}
 
 	flash->spi = spi;
 	mutex_init(&flash->lock);
 	dev_set_drvdata(&spi->dev, flash);
 
 	/*
-	 * Atmel serial flash tend to power up
-	 * with the software protection bits set
+	 * Atmel and SST serial flash tend to power
+	 * up with the software protection bits set
 	 */
 
-	if (info->jedec_id >> 16 == 0x1f) {
+	if (info->jedec_id >> 16 == 0x1f ||
+	    info->jedec_id >> 16 == 0xbf) {
 		write_enable(flash);
 		write_sr(flash, 0);
 	}
@@ -812,9 +862,14 @@ static int __devinit m25p_probe(struct spi_device *spi)
 		flash->mtd.erasesize = info->sector_size;
 	}
 
+	if (info->flags & M25P_NO_ERASE)
+		flash->mtd.flags |= MTD_NO_ERASE;
+
 	flash->mtd.dev.parent = &spi->dev;
+	flash->page_size = info->page_size;
+	flash->addr_width = info->addr_width;
 
-	dev_info(&spi->dev, "%s (%lld Kbytes)\n", info->name,
+	dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
 			(long long)flash->mtd.size >> 10);
 
 	DEBUG(MTD_DEBUG_LEVEL2,
@@ -888,8 +943,10 @@ static int __devexit m25p_remove(struct spi_device *spi)
 		status = del_mtd_partitions(&flash->mtd);
 	else
 		status = del_mtd_device(&flash->mtd);
-	if (status == 0)
+	if (status == 0) {
+		kfree(flash->command);
 		kfree(flash);
+	}
 	return 0;
 }
 
@@ -900,6 +957,7 @@ static struct spi_driver m25p80_driver = {
 		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
+	.id_table	= m25p_ids,
 	.probe	= m25p_probe,
 	.remove	= __devexit_p(m25p_remove),
 
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 93e3627be74..19817404ce7 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -636,6 +636,7 @@ add_dataflash_otp(struct spi_device *spi, char *name,
 	struct mtd_info			*device;
 	struct flash_platform_data	*pdata = spi->dev.platform_data;
 	char				*otp_tag = "";
+	int				err = 0;
 
 	priv = kzalloc(sizeof *priv, GFP_KERNEL);
 	if (!priv)
@@ -693,13 +694,23 @@ add_dataflash_otp(struct spi_device *spi, char *name,
 
 		if (nr_parts > 0) {
 			priv->partitioned = 1;
-			return add_mtd_partitions(device, parts, nr_parts);
+			err = add_mtd_partitions(device, parts, nr_parts);
+			goto out;
 		}
 	} else if (pdata && pdata->nr_parts)
 		dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
 				pdata->nr_parts, device->name);
 
-	return add_mtd_device(device) == 1 ? -ENODEV : 0;
+	if (add_mtd_device(device) == 1)
+		err = -ENODEV;
+
+out:
+	if (!err)
+		return 0;
+
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(priv);
+	return err;
 }
 
 static inline int __devinit
@@ -932,8 +943,10 @@ static int __devexit dataflash_remove(struct spi_device *spi)
 		status = del_mtd_partitions(&flash->mtd);
 	else
 		status = del_mtd_device(&flash->mtd);
-	if (status == 0)
+	if (status == 0) {
+		dev_set_drvdata(&spi->dev, NULL);
 		kfree(flash);
+	}
 	return status;
 }
 
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 847e214ade5..4c364d44ad5 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -359,12 +359,6 @@ config MTD_SA1100
 	  the SA1100 and SA1110, including the Assabet and the Compaq iPAQ.
 	  If you have such a board, say 'Y'.
 
-config MTD_IPAQ
-	tristate "CFI Flash device mapped on Compaq/HP iPAQ"
-	depends on IPAQ_HANDHELD && MTD_CFI
-	help
-	  This provides a driver for the on-board flash of the iPAQ.
-
 config MTD_DC21285
 	tristate "CFI Flash device mapped on DC21285 Footbridge"
 	depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index ae2f6dbe43c..ce315214ff2 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -24,12 +24,12 @@ obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o
 obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
+obj-$(CONFIG_MTD_PISMO)		+= pismo.o
 obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
 obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
 obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
 obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
 obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
-obj-$(CONFIG_MTD_IPAQ)		+= ipaq-flash.o
 obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
 obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o
 obj-$(CONFIG_MTD_NETSC520)	+= netsc520.o
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
deleted file mode 100644
index 76708e796b7..00000000000
--- a/drivers/mtd/maps/ipaq-flash.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based)
- *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
- * (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
- * (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/system.h>
-#include <asm/errno.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#ifdef CONFIG_MTD_CONCAT
-#include <linux/mtd/concat.h>
-#endif
-
-#include <mach/hardware.h>
-#include <mach/h3600.h>
-#include <asm/io.h>
-
-
-#ifndef CONFIG_IPAQ_HANDHELD
-#error This is for iPAQ Handhelds only
-#endif
-#ifdef CONFIG_SA1100_JORNADA56X
-
-static void jornada56x_set_vpp(struct map_info *map, int vpp)
-{
-	if (vpp)
-		GPSR = GPIO_GPIO26;
-	else
-		GPCR = GPIO_GPIO26;
-	GPDR |= GPIO_GPIO26;
-}
-
-#endif
-
-#ifdef CONFIG_SA1100_JORNADA720
-
-static void jornada720_set_vpp(struct map_info *map, int vpp)
-{
-	if (vpp)
-		PPSR |= 0x80;
-	else
-		PPSR &= ~0x80;
-	PPDR |= 0x80;
-}
-
-#endif
-
-#define MAX_IPAQ_CS 2		/* Number of CS we are going to test */
-
-#define IPAQ_MAP_INIT(X) \
-	{ \
-		name:		"IPAQ flash " X, \
-	}
-
-
-static struct map_info ipaq_map[MAX_IPAQ_CS] = {
-	IPAQ_MAP_INIT("bank 1"),
-	IPAQ_MAP_INIT("bank 2")
-};
-
-static struct mtd_info *my_sub_mtd[MAX_IPAQ_CS] = {
-	NULL,
-	NULL
-};
-
-/*
- * Here are partition information for all known IPAQ-based devices.
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size which
- * is not necessarily the actual flash size.  It must be no more than
- * the value specified in the "struct map_desc *_io_desc" mapping
- * definition for the corresponding machine.
- *
- * Please keep these in alphabetical order, and formatted as per existing
- * entries.  Thanks.
- */
-
-#ifdef CONFIG_IPAQ_HANDHELD
-static unsigned long h3xxx_max_flash_size = 0x04000000;
-static struct mtd_partition h3xxx_partitions[] = {
-	{
-		name:		"H3XXX boot firmware",
-#ifndef CONFIG_LAB
-		size:		0x00040000,
-#else
-		size:		0x00080000,
-#endif
-		offset:		0,
-#ifndef CONFIG_LAB
-		mask_flags:	MTD_WRITEABLE,  /* force read-only */
-#endif
-	},
-	{
-		name:		"H3XXX root jffs2",
-#ifndef CONFIG_LAB
-		size:		0x2000000 - 2*0x40000, /* Warning, this is fixed later */
-		offset:		0x00040000,
-#else
-		size:		0x2000000 - 0x40000 - 0x80000, /* Warning, this is fixed later */
-		offset:		0x00080000,
-#endif
-	},
-	{
-		name:		"asset",
-		size:		0x40000,
-		offset:		0x2000000 - 0x40000, /* Warning, this is fixed later */
-		mask_flags:	MTD_WRITEABLE,  /* force read-only */
-	}
-};
-
-#ifndef CONFIG_MTD_CONCAT
-static struct mtd_partition h3xxx_partitions_bank2[] = {
-	/* this is used only on 2 CS machines when concat is not present */
-	{
-		name:		"second H3XXX root jffs2",
-		size:		0x1000000 - 0x40000, /* Warning, this is fixed later */
-		offset:		0x00000000,
-	},
-	{
-		name:		"second asset",
-		size:		0x40000,
-		offset:		0x1000000 - 0x40000, /* Warning, this is fixed later */
-		mask_flags:	MTD_WRITEABLE,  /* force read-only */
-	}
-};
-#endif
-
-static DEFINE_SPINLOCK(ipaq_vpp_lock);
-
-static void h3xxx_set_vpp(struct map_info *map, int vpp)
-{
-	static int nest = 0;
-
-	spin_lock(&ipaq_vpp_lock);
-	if (vpp)
-		nest++;
-	else
-		nest--;
-	if (nest)
-		assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 1);
-	else
-		assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 0);
-	spin_unlock(&ipaq_vpp_lock);
-}
-
-#endif
-
-#if defined(CONFIG_SA1100_JORNADA56X) || defined(CONFIG_SA1100_JORNADA720)
-static unsigned long jornada_max_flash_size = 0x02000000;
-static struct mtd_partition jornada_partitions[] = {
-	{
-		name:		"Jornada boot firmware",
-		size:		0x00040000,
-		offset:		0,
-		mask_flags:	MTD_WRITEABLE,  /* force read-only */
-	}, {
-		name:		"Jornada root jffs2",
-		size:		MTDPART_SIZ_FULL,
-		offset:		0x00040000,
-	}
-};
-#endif
-
-
-static struct mtd_partition *parsed_parts;
-static struct mtd_info *mymtd;
-
-static unsigned long cs_phys[] = {
-#ifdef CONFIG_ARCH_SA1100
-	SA1100_CS0_PHYS,
-	SA1100_CS1_PHYS,
-	SA1100_CS2_PHYS,
-	SA1100_CS3_PHYS,
-	SA1100_CS4_PHYS,
-	SA1100_CS5_PHYS,
-#else
-	PXA_CS0_PHYS,
-	PXA_CS1_PHYS,
-	PXA_CS2_PHYS,
-	PXA_CS3_PHYS,
-	PXA_CS4_PHYS,
-	PXA_CS5_PHYS,
-#endif
-};
-
-static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-static int __init h1900_special_case(void);
-
-static int __init ipaq_mtd_init(void)
-{
-	struct mtd_partition *parts = NULL;
-	int nb_parts = 0;
-	int parsed_nr_parts = 0;
-	const char *part_type;
-	int i; /* used when we have >1 flash chips */
-	unsigned long tot_flashsize = 0; /* used when we have >1 flash chips */
-
-	/* Default flash bankwidth */
-	// ipaq_map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
-
-	if (machine_is_h1900())
-	{
-		/* For our intents, the h1900 is not a real iPAQ, so we special-case it. */
-		return h1900_special_case();
-	}
-
-	if (machine_is_h3100() || machine_is_h1900())
-		for(i=0; i<MAX_IPAQ_CS; i++)
-			ipaq_map[i].bankwidth = 2;
-	else
-		for(i=0; i<MAX_IPAQ_CS; i++)
-			ipaq_map[i].bankwidth = 4;
-
-	/*
-	 * Static partition definition selection
-	 */
-	part_type = "static";
-
-	simple_map_init(&ipaq_map[0]);
-	simple_map_init(&ipaq_map[1]);
-
-#ifdef CONFIG_IPAQ_HANDHELD
-	if (machine_is_ipaq()) {
-		parts = h3xxx_partitions;
-		nb_parts = ARRAY_SIZE(h3xxx_partitions);
-		for(i=0; i<MAX_IPAQ_CS; i++) {
-			ipaq_map[i].size = h3xxx_max_flash_size;
-			ipaq_map[i].set_vpp = h3xxx_set_vpp;
-			ipaq_map[i].phys = cs_phys[i];
-			ipaq_map[i].virt = ioremap(cs_phys[i], 0x04000000);
-			if (machine_is_h3100 () || machine_is_h1900())
-				ipaq_map[i].bankwidth = 2;
-		}
-		if (machine_is_h3600()) {
-			/* No asset partition here */
-			h3xxx_partitions[1].size += 0x40000;
-			nb_parts--;
-		}
-	}
-#endif
-#ifdef CONFIG_ARCH_H5400
-	if (machine_is_h5400()) {
-		ipaq_map[0].size = 0x02000000;
-		ipaq_map[1].size = 0x02000000;
-		ipaq_map[1].phys = 0x02000000;
-		ipaq_map[1].virt = ipaq_map[0].virt + 0x02000000;
-	}
-#endif
-#ifdef CONFIG_ARCH_H1900
-	if (machine_is_h1900()) {
-		ipaq_map[0].size = 0x00400000;
-		ipaq_map[1].size = 0x02000000;
-		ipaq_map[1].phys = 0x00080000;
-		ipaq_map[1].virt = ipaq_map[0].virt + 0x00080000;
-	}
-#endif
-
-#ifdef CONFIG_SA1100_JORNADA56X
-	if (machine_is_jornada56x()) {
-		parts = jornada_partitions;
-		nb_parts = ARRAY_SIZE(jornada_partitions);
-		ipaq_map[0].size = jornada_max_flash_size;
-		ipaq_map[0].set_vpp = jornada56x_set_vpp;
-		ipaq_map[0].virt = (__u32)ioremap(0x0, 0x04000000);
-	}
-#endif
-#ifdef CONFIG_SA1100_JORNADA720
-	if (machine_is_jornada720()) {
-		parts = jornada_partitions;
-		nb_parts = ARRAY_SIZE(jornada_partitions);
-		ipaq_map[0].size = jornada_max_flash_size;
-		ipaq_map[0].set_vpp = jornada720_set_vpp;
-	}
-#endif
-
-
-	if (machine_is_ipaq()) { /* for iPAQs only */
-		for(i=0; i<MAX_IPAQ_CS; i++) {
-			printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with CFI.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt);
-			my_sub_mtd[i] = do_map_probe("cfi_probe", &ipaq_map[i]);
-			if (!my_sub_mtd[i]) {
-				printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt);
-				my_sub_mtd[i] = do_map_probe("jedec_probe", &ipaq_map[i]);
-			}
-			if (!my_sub_mtd[i]) {
-				printk(KERN_NOTICE "iPAQ flash: failed to find flash.\n");
-				if (i)
-					break;
-				else
-					return -ENXIO;
-			} else
-				printk(KERN_NOTICE "iPAQ flash: found %d bytes\n", my_sub_mtd[i]->size);
-
-			/* do we really need this debugging? --joshua 20030703 */
-			// printk("my_sub_mtd[%d]=%p\n", i, my_sub_mtd[i]);
-			my_sub_mtd[i]->owner = THIS_MODULE;
-			tot_flashsize += my_sub_mtd[i]->size;
-		}
-#ifdef CONFIG_MTD_CONCAT
-		/* fix the asset location */
-#	ifdef CONFIG_LAB
-		h3xxx_partitions[1].size = tot_flashsize - 0x40000 - 0x80000 /* extra big boot block */;
-#	else
-		h3xxx_partitions[1].size = tot_flashsize - 2 * 0x40000;
-#	endif
-		h3xxx_partitions[2].offset = tot_flashsize - 0x40000;
-		/* and concat the devices */
-		mymtd = mtd_concat_create(&my_sub_mtd[0], i,
-					  "ipaq");
-		if (!mymtd) {
-			printk("Cannot create iPAQ concat device\n");
-			return -ENXIO;
-		}
-#else
-		mymtd = my_sub_mtd[0];
-
-		/*
-		 *In the very near future, command line partition parsing
-		 * will use the device name as 'mtd-id' instead of a value
-		 * passed to the parse_cmdline_partitions() routine. Since
-		 * the bootldr says 'ipaq', make sure it continues to work.
-		 */
-		mymtd->name = "ipaq";
-
-		if ((machine_is_h3600())) {
-#	ifdef CONFIG_LAB
-			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x80000;
-#	else
-			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000;
-#	endif
-			nb_parts = 2;
-		} else {
-#	ifdef CONFIG_LAB
-			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000 - 0x80000; /* extra big boot block */
-#	else
-			h3xxx_partitions[1].size = my_sub_mtd[0]->size - 2*0x40000;
-#	endif
-			h3xxx_partitions[2].offset = my_sub_mtd[0]->size - 0x40000;
-		}
-
-		if (my_sub_mtd[1]) {
-#	ifdef CONFIG_LAB
-			h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x80000;
-#	else
-			h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x40000;
-#	endif
-			h3xxx_partitions_bank2[1].offset = my_sub_mtd[1]->size - 0x40000;
-		}
-#endif
-	}
-	else {
-		/*
-		 * Now let's probe for the actual flash.  Do it here since
-		 * specific machine settings might have been set above.
-		 */
-		printk(KERN_NOTICE "IPAQ flash: probing %d-bit flash bus, window=%lx\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
-		mymtd = do_map_probe("cfi_probe", &ipaq_map[0]);
-		if (!mymtd)
-			return -ENXIO;
-		mymtd->owner = THIS_MODULE;
-	}
-
-
-	/*
-	 * Dynamic partition selection stuff (might override the static ones)
-	 */
-
-	 i = parse_mtd_partitions(mymtd, part_probes, &parsed_parts, 0);
-
-	 if (i > 0) {
-		 nb_parts = parsed_nr_parts = i;
-		 parts = parsed_parts;
-		 part_type = "dynamic";
-	 }
-
-	 if (!parts) {
-		 printk(KERN_NOTICE "IPAQ flash: no partition info available, registering whole flash at once\n");
-		 add_mtd_device(mymtd);
-#ifndef CONFIG_MTD_CONCAT
-		 if (my_sub_mtd[1])
-			 add_mtd_device(my_sub_mtd[1]);
-#endif
-	 } else {
-		 printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-		 add_mtd_partitions(mymtd, parts, nb_parts);
-#ifndef CONFIG_MTD_CONCAT
-		 if (my_sub_mtd[1])
-			 add_mtd_partitions(my_sub_mtd[1], h3xxx_partitions_bank2, ARRAY_SIZE(h3xxx_partitions_bank2));
-#endif
-	 }
-
-	 return 0;
-}
-
-static void __exit ipaq_mtd_cleanup(void)
-{
-	int i;
-
-	if (mymtd) {
-		del_mtd_partitions(mymtd);
-#ifndef CONFIG_MTD_CONCAT
-		if (my_sub_mtd[1])
-			del_mtd_partitions(my_sub_mtd[1]);
-#endif
-		map_destroy(mymtd);
-#ifdef CONFIG_MTD_CONCAT
-		for(i=0; i<MAX_IPAQ_CS; i++)
-#else
-			for(i=1; i<MAX_IPAQ_CS; i++)
-#endif
-			{
-				if (my_sub_mtd[i])
-					map_destroy(my_sub_mtd[i]);
-			}
-		kfree(parsed_parts);
-	}
-}
-
-static int __init h1900_special_case(void)
-{
-	/* The iPAQ h1900 is a special case - it has weird ROM. */
-	simple_map_init(&ipaq_map[0]);
-	ipaq_map[0].size = 0x80000;
-	ipaq_map[0].set_vpp = h3xxx_set_vpp;
-	ipaq_map[0].phys = 0x0;
-	ipaq_map[0].virt = ioremap(0x0, 0x04000000);
-	ipaq_map[0].bankwidth = 2;
-
-	printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
-	mymtd = do_map_probe("jedec_probe", &ipaq_map[0]);
-	if (!mymtd)
-		return -ENODEV;
-	add_mtd_device(mymtd);
-	printk(KERN_NOTICE "iPAQ flash: registered h1910 flash\n");
-
-	return 0;
-}
-
-module_init(ipaq_mtd_init);
-module_exit(ipaq_mtd_cleanup);
-
-MODULE_AUTHOR("Jamey Hicks");
-MODULE_DESCRIPTION("IPAQ CFI map driver");
-MODULE_LICENSE("MIT");
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 7214b876feb..7b051529741 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -210,7 +210,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	 * not attempt to do a direct access on us.
 	 */
 	info->map.phys = NO_XIP;
-	info->map.size = dev->resource->end - dev->resource->start + 1;
+	info->map.size = resource_size(dev->resource);
 
 	/*
 	 * We only support 16-bit accesses for now. If and when
@@ -224,7 +224,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	info->map.copy_from = ixp4xx_copy_from,
 
 	info->res = request_mem_region(dev->resource->start,
-			dev->resource->end - dev->resource->start + 1,
+			resource_size(dev->resource),
 			"IXP4XXFlash");
 	if (!info->res) {
 		printk(KERN_ERR "IXP4XXFlash: Could not reserve memory region\n");
@@ -233,7 +233,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	}
 
 	info->map.virt = ioremap(dev->resource->start,
-				 dev->resource->end - dev->resource->start + 1);
+				 resource_size(dev->resource));
 	if (!info->map.virt) {
 		printk(KERN_ERR "IXP4XXFlash: Failed to ioremap region\n");
 		err = -EIO;
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 380648e9051..d9603f7f965 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -48,23 +48,22 @@ static int physmap_flash_remove(struct platform_device *dev)
 
 	if (info->cmtd) {
 #ifdef CONFIG_MTD_PARTITIONS
-		if (info->nr_parts || physmap_data->nr_parts)
+		if (info->nr_parts || physmap_data->nr_parts) {
 			del_mtd_partitions(info->cmtd);
-		else
+
+			if (info->nr_parts)
+				kfree(info->parts);
+		} else {
 			del_mtd_device(info->cmtd);
+		}
 #else
 		del_mtd_device(info->cmtd);
 #endif
-	}
-#ifdef CONFIG_MTD_PARTITIONS
-	if (info->nr_parts)
-		kfree(info->parts);
-#endif
-
 #ifdef CONFIG_MTD_CONCAT
-	if (info->cmtd != info->mtd[0])
-		mtd_concat_destroy(info->cmtd);
+		if (info->cmtd != info->mtd[0])
+			mtd_concat_destroy(info->cmtd);
 #endif
+	}
 
 	for (i = 0; i < MAX_RESOURCES; i++) {
 		if (info->mtd[i] != NULL)
@@ -130,7 +129,7 @@ static int physmap_flash_probe(struct platform_device *dev)
 						 info->map[i].size);
 		if (info->map[i].virt == NULL) {
 			dev_err(&dev->dev, "Failed to ioremap flash region\n");
-			err = EIO;
+			err = -EIO;
 			goto err_out;
 		}
 
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index d7a47574d21..f3af87e08ec 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -248,7 +248,7 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla
 		plat->exit();
 }
 
-static struct sa_info *__init
+static struct sa_info *__devinit
 sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat)
 {
 	struct sa_info *info;
diff --git a/drivers/mtd/maps/vmu-flash.c b/drivers/mtd/maps/vmu-flash.c
index 1f73297e777..82afad0ddd7 100644
--- a/drivers/mtd/maps/vmu-flash.c
+++ b/drivers/mtd/maps/vmu-flash.c
@@ -612,16 +612,15 @@ static int __devinit vmu_connect(struct maple_device *mdev)
 
 	test_flash_data = be32_to_cpu(mdev->devinfo.function);
 	/* Need to count how many bits are set - to find out which
-	 * function_data element has details of the memory card:
-	 * using Brian Kernighan's/Peter Wegner's method */
-	for (c = 0; test_flash_data; c++)
-		test_flash_data &= test_flash_data - 1;
+	 * function_data element has details of the memory card
+	 */
+	c = hweight_long(test_flash_data);
 
 	basic_flash_data = be32_to_cpu(mdev->devinfo.function_data[c - 1]);
 
 	card = kmalloc(sizeof(struct memcard), GFP_KERNEL);
 	if (!card) {
-		error = ENOMEM;
+		error = -ENOMEM;
 		goto fail_nomem;
 	}
 
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 64e2b379a35..c82e09bbc5f 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -84,9 +84,6 @@ static int mtd_blktrans_thread(void *arg)
 	struct request_queue *rq = tr->blkcore_priv->rq;
 	struct request *req = NULL;
 
-	/* we might get involved when memory gets low, so use PF_MEMALLOC */
-	current->flags |= PF_MEMALLOC;
-
 	spin_lock_irq(rq->queue_lock);
 
 	while (!kthread_should_stop()) {
@@ -381,7 +378,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	tr->blkcore_priv->thread = kthread_run(mtd_blktrans_thread, tr,
 			"%sd", tr->name);
 	if (IS_ERR(tr->blkcore_priv->thread)) {
-		int ret = PTR_ERR(tr->blkcore_priv->thread);
+		ret = PTR_ERR(tr->blkcore_priv->thread);
 		blk_cleanup_queue(tr->blkcore_priv->rq);
 		unregister_blkdev(tr->major, tr->name);
 		kfree(tr->blkcore_priv);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 467a4f177bf..c356c0a30c3 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -447,7 +447,7 @@ struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
 		for (i=0; i< MAX_MTD_DEVICES; i++)
 			if (mtd_table[i] == mtd)
 				ret = mtd_table[i];
-	} else if (num < MAX_MTD_DEVICES) {
+	} else if (num >= 0 && num < MAX_MTD_DEVICES) {
 		ret = mtd_table[num];
 		if (mtd && mtd != ret)
 			ret = NULL;
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index 1060337c06d..a714ec48276 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -29,14 +29,34 @@
 #include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
-#include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
+#include <linux/kmsg_dump.h>
+
+/* Maximum MTD partition size */
+#define MTDOOPS_MAX_MTD_SIZE (8 * 1024 * 1024)
 
 #define MTDOOPS_KERNMSG_MAGIC 0x5d005d00
-#define OOPS_PAGE_SIZE 4096
+#define MTDOOPS_HEADER_SIZE   8
+
+static unsigned long record_size = 4096;
+module_param(record_size, ulong, 0400);
+MODULE_PARM_DESC(record_size,
+		"record size for MTD OOPS pages in bytes (default 4096)");
+
+static char mtddev[80];
+module_param_string(mtddev, mtddev, 80, 0400);
+MODULE_PARM_DESC(mtddev,
+		"name or index number of the MTD device to use");
+
+static int dump_oops = 1;
+module_param(dump_oops, int, 0600);
+MODULE_PARM_DESC(dump_oops,
+		"set to 1 to dump oopses, 0 to only dump panics (default 1)");
 
 static struct mtdoops_context {
+	struct kmsg_dumper dump;
+
 	int mtd_index;
 	struct work_struct work_erase;
 	struct work_struct work_write;
@@ -44,28 +64,43 @@ static struct mtdoops_context {
 	int oops_pages;
 	int nextpage;
 	int nextcount;
-	char *name;
+	unsigned long *oops_page_used;
 
 	void *oops_buf;
-
-	/* writecount and disabling ready are spin lock protected */
-	spinlock_t writecount_lock;
-	int ready;
-	int writecount;
 } oops_cxt;
 
+static void mark_page_used(struct mtdoops_context *cxt, int page)
+{
+	set_bit(page, cxt->oops_page_used);
+}
+
+static void mark_page_unused(struct mtdoops_context *cxt, int page)
+{
+	clear_bit(page, cxt->oops_page_used);
+}
+
+static int page_is_used(struct mtdoops_context *cxt, int page)
+{
+	return test_bit(page, cxt->oops_page_used);
+}
+
 static void mtdoops_erase_callback(struct erase_info *done)
 {
 	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
 	wake_up(wait_q);
 }
 
-static int mtdoops_erase_block(struct mtd_info *mtd, int offset)
+static int mtdoops_erase_block(struct mtdoops_context *cxt, int offset)
 {
+	struct mtd_info *mtd = cxt->mtd;
+	u32 start_page_offset = mtd_div_by_eb(offset, mtd) * mtd->erasesize;
+	u32 start_page = start_page_offset / record_size;
+	u32 erase_pages = mtd->erasesize / record_size;
 	struct erase_info erase;
 	DECLARE_WAITQUEUE(wait, current);
 	wait_queue_head_t wait_q;
 	int ret;
+	int page;
 
 	init_waitqueue_head(&wait_q);
 	erase.mtd = mtd;
@@ -81,25 +116,24 @@ static int mtdoops_erase_block(struct mtd_info *mtd, int offset)
 	if (ret) {
 		set_current_state(TASK_RUNNING);
 		remove_wait_queue(&wait_q, &wait);
-		printk (KERN_WARNING "mtdoops: erase of region [0x%llx, 0x%llx] "
-				     "on \"%s\" failed\n",
-			(unsigned long long)erase.addr, (unsigned long long)erase.len, mtd->name);
+		printk(KERN_WARNING "mtdoops: erase of region [0x%llx, 0x%llx] on \"%s\" failed\n",
+		       (unsigned long long)erase.addr,
+		       (unsigned long long)erase.len, mtddev);
 		return ret;
 	}
 
 	schedule();  /* Wait for erase to finish. */
 	remove_wait_queue(&wait_q, &wait);
 
+	/* Mark pages as unused */
+	for (page = start_page; page < start_page + erase_pages; page++)
+		mark_page_unused(cxt, page);
+
 	return 0;
 }
 
 static void mtdoops_inc_counter(struct mtdoops_context *cxt)
 {
-	struct mtd_info *mtd = cxt->mtd;
-	size_t retlen;
-	u32 count;
-	int ret;
-
 	cxt->nextpage++;
 	if (cxt->nextpage >= cxt->oops_pages)
 		cxt->nextpage = 0;
@@ -107,25 +141,13 @@ static void mtdoops_inc_counter(struct mtdoops_context *cxt)
 	if (cxt->nextcount == 0xffffffff)
 		cxt->nextcount = 0;
 
-	ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4,
-			&retlen, (u_char *) &count);
-	if ((retlen != 4) || ((ret < 0) && (ret != -EUCLEAN))) {
-		printk(KERN_ERR "mtdoops: Read failure at %d (%td of 4 read)"
-				", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE,
-				retlen, ret);
+	if (page_is_used(cxt, cxt->nextpage)) {
 		schedule_work(&cxt->work_erase);
 		return;
 	}
 
-	/* See if we need to erase the next block */
-	if (count != 0xffffffff) {
-		schedule_work(&cxt->work_erase);
-		return;
-	}
-
-	printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n",
-			cxt->nextpage, cxt->nextcount);
-	cxt->ready = 1;
+	printk(KERN_DEBUG "mtdoops: ready %d, %d (no erase)\n",
+	       cxt->nextpage, cxt->nextcount);
 }
 
 /* Scheduled work - when we can't proceed without erasing a block */
@@ -140,47 +162,47 @@ static void mtdoops_workfunc_erase(struct work_struct *work)
 	if (!mtd)
 		return;
 
-	mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize;
+	mod = (cxt->nextpage * record_size) % mtd->erasesize;
 	if (mod != 0) {
-		cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE);
+		cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / record_size);
 		if (cxt->nextpage >= cxt->oops_pages)
 			cxt->nextpage = 0;
 	}
 
 	while (mtd->block_isbad) {
-		ret = mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+		ret = mtd->block_isbad(mtd, cxt->nextpage * record_size);
 		if (!ret)
 			break;
 		if (ret < 0) {
-			printk(KERN_ERR "mtdoops: block_isbad failed, aborting.\n");
+			printk(KERN_ERR "mtdoops: block_isbad failed, aborting\n");
 			return;
 		}
 badblock:
-		printk(KERN_WARNING "mtdoops: Bad block at %08x\n",
-				cxt->nextpage * OOPS_PAGE_SIZE);
+		printk(KERN_WARNING "mtdoops: bad block at %08lx\n",
+		       cxt->nextpage * record_size);
 		i++;
-		cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE);
+		cxt->nextpage = cxt->nextpage + (mtd->erasesize / record_size);
 		if (cxt->nextpage >= cxt->oops_pages)
 			cxt->nextpage = 0;
-		if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) {
-			printk(KERN_ERR "mtdoops: All blocks bad!\n");
+		if (i == cxt->oops_pages / (mtd->erasesize / record_size)) {
+			printk(KERN_ERR "mtdoops: all blocks bad!\n");
 			return;
 		}
 	}
 
 	for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
-		ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+		ret = mtdoops_erase_block(cxt, cxt->nextpage * record_size);
 
 	if (ret >= 0) {
-		printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount);
-		cxt->ready = 1;
+		printk(KERN_DEBUG "mtdoops: ready %d, %d\n",
+		       cxt->nextpage, cxt->nextcount);
 		return;
 	}
 
-	if (mtd->block_markbad && (ret == -EIO)) {
-		ret = mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+	if (mtd->block_markbad && ret == -EIO) {
+		ret = mtd->block_markbad(mtd, cxt->nextpage * record_size);
 		if (ret < 0) {
-			printk(KERN_ERR "mtdoops: block_markbad failed, aborting.\n");
+			printk(KERN_ERR "mtdoops: block_markbad failed, aborting\n");
 			return;
 		}
 	}
@@ -191,36 +213,37 @@ static void mtdoops_write(struct mtdoops_context *cxt, int panic)
 {
 	struct mtd_info *mtd = cxt->mtd;
 	size_t retlen;
+	u32 *hdr;
 	int ret;
 
-	if (cxt->writecount < OOPS_PAGE_SIZE)
-		memset(cxt->oops_buf + cxt->writecount, 0xff,
-					OOPS_PAGE_SIZE - cxt->writecount);
+	/* Add mtdoops header to the buffer */
+	hdr = cxt->oops_buf;
+	hdr[0] = cxt->nextcount;
+	hdr[1] = MTDOOPS_KERNMSG_MAGIC;
 
 	if (panic)
-		ret = mtd->panic_write(mtd, cxt->nextpage * OOPS_PAGE_SIZE,
-					OOPS_PAGE_SIZE, &retlen, cxt->oops_buf);
+		ret = mtd->panic_write(mtd, cxt->nextpage * record_size,
+					record_size, &retlen, cxt->oops_buf);
 	else
-		ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE,
-					OOPS_PAGE_SIZE, &retlen, cxt->oops_buf);
-
-	cxt->writecount = 0;
+		ret = mtd->write(mtd, cxt->nextpage * record_size,
+					record_size, &retlen, cxt->oops_buf);
 
-	if ((retlen != OOPS_PAGE_SIZE) || (ret < 0))
-		printk(KERN_ERR "mtdoops: Write failure at %d (%td of %d written), err %d.\n",
-			cxt->nextpage * OOPS_PAGE_SIZE, retlen,	OOPS_PAGE_SIZE, ret);
+	if (retlen != record_size || ret < 0)
+		printk(KERN_ERR "mtdoops: write failure at %ld (%td of %ld written), error %d\n",
+		       cxt->nextpage * record_size, retlen, record_size, ret);
+	mark_page_used(cxt, cxt->nextpage);
+	memset(cxt->oops_buf, 0xff, record_size);
 
 	mtdoops_inc_counter(cxt);
 }
 
-
 static void mtdoops_workfunc_write(struct work_struct *work)
 {
 	struct mtdoops_context *cxt =
 			container_of(work, struct mtdoops_context, work_write);
 
 	mtdoops_write(cxt, 0);
-}					
+}
 
 static void find_next_position(struct mtdoops_context *cxt)
 {
@@ -230,28 +253,33 @@ static void find_next_position(struct mtdoops_context *cxt)
 	size_t retlen;
 
 	for (page = 0; page < cxt->oops_pages; page++) {
-		ret = mtd->read(mtd, page * OOPS_PAGE_SIZE, 8, &retlen, (u_char *) &count[0]);
-		if ((retlen != 8) || ((ret < 0) && (ret != -EUCLEAN))) {
-			printk(KERN_ERR "mtdoops: Read failure at %d (%td of 8 read)"
-				", err %d.\n", page * OOPS_PAGE_SIZE, retlen, ret);
+		/* Assume the page is used */
+		mark_page_used(cxt, page);
+		ret = mtd->read(mtd, page * record_size, MTDOOPS_HEADER_SIZE,
+				&retlen, (u_char *) &count[0]);
+		if (retlen != MTDOOPS_HEADER_SIZE ||
+				(ret < 0 && ret != -EUCLEAN)) {
+			printk(KERN_ERR "mtdoops: read failure at %ld (%td of %d read), err %d\n",
+			       page * record_size, retlen,
+			       MTDOOPS_HEADER_SIZE, ret);
 			continue;
 		}
 
-		if (count[1] != MTDOOPS_KERNMSG_MAGIC)
-			continue;
+		if (count[0] == 0xffffffff && count[1] == 0xffffffff)
+			mark_page_unused(cxt, page);
 		if (count[0] == 0xffffffff)
 			continue;
 		if (maxcount == 0xffffffff) {
 			maxcount = count[0];
 			maxpos = page;
-		} else if ((count[0] < 0x40000000) && (maxcount > 0xc0000000)) {
+		} else if (count[0] < 0x40000000 && maxcount > 0xc0000000) {
 			maxcount = count[0];
 			maxpos = page;
-		} else if ((count[0] > maxcount) && (count[0] < 0xc0000000)) {
+		} else if (count[0] > maxcount && count[0] < 0xc0000000) {
 			maxcount = count[0];
 			maxpos = page;
-		} else if ((count[0] > maxcount) && (count[0] > 0xc0000000)
-					&& (maxcount > 0x80000000)) {
+		} else if (count[0] > maxcount && count[0] > 0xc0000000
+					&& maxcount > 0x80000000) {
 			maxcount = count[0];
 			maxpos = page;
 		}
@@ -269,187 +297,170 @@ static void find_next_position(struct mtdoops_context *cxt)
 	mtdoops_inc_counter(cxt);
 }
 
-
-static void mtdoops_notify_add(struct mtd_info *mtd)
+static void mtdoops_do_dump(struct kmsg_dumper *dumper,
+		enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
+		const char *s2, unsigned long l2)
 {
-	struct mtdoops_context *cxt = &oops_cxt;
+	struct mtdoops_context *cxt = container_of(dumper,
+			struct mtdoops_context, dump);
+	unsigned long s1_start, s2_start;
+	unsigned long l1_cpy, l2_cpy;
+	char *dst;
+
+	/* Only dump oopses if dump_oops is set */
+	if (reason == KMSG_DUMP_OOPS && !dump_oops)
+		return;
 
-	if (cxt->name && !strcmp(mtd->name, cxt->name))
-		cxt->mtd_index = mtd->index;
+	dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */
+	l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE);
+	l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy);
 
-	if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
-		return;
+	s2_start = l2 - l2_cpy;
+	s1_start = l1 - l1_cpy;
 
-	if (mtd->size < (mtd->erasesize * 2)) {
-		printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n",
-				mtd->index);
-		return;
-	}
+	memcpy(dst, s1 + s1_start, l1_cpy);
+	memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
 
-	if (mtd->erasesize < OOPS_PAGE_SIZE) {
-		printk(KERN_ERR "Eraseblock size of MTD partition %d too small\n",
-				mtd->index);
+	/* Panics must be written immediately */
+	if (reason == KMSG_DUMP_PANIC) {
+		if (!cxt->mtd->panic_write)
+			printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n");
+		else
+			mtdoops_write(cxt, 1);
 		return;
 	}
 
-	cxt->mtd = mtd;
-	if (mtd->size > INT_MAX)
-		cxt->oops_pages = INT_MAX / OOPS_PAGE_SIZE;
-	else
-		cxt->oops_pages = (int)mtd->size / OOPS_PAGE_SIZE;
-
-	find_next_position(cxt);
-
-	printk(KERN_INFO "mtdoops: Attached to MTD device %d\n", mtd->index);
+	/* For other cases, schedule work to write it "nicely" */
+	schedule_work(&cxt->work_write);
 }
 
-static void mtdoops_notify_remove(struct mtd_info *mtd)
+static void mtdoops_notify_add(struct mtd_info *mtd)
 {
 	struct mtdoops_context *cxt = &oops_cxt;
+	u64 mtdoops_pages = div_u64(mtd->size, record_size);
+	int err;
 
-	if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
-		return;
-
-	cxt->mtd = NULL;
-	flush_scheduled_work();
-}
-
-static void mtdoops_console_sync(void)
-{
-	struct mtdoops_context *cxt = &oops_cxt;
-	struct mtd_info *mtd = cxt->mtd;
-	unsigned long flags;
+	if (!strcmp(mtd->name, mtddev))
+		cxt->mtd_index = mtd->index;
 
-	if (!cxt->ready || !mtd || cxt->writecount == 0)
+	if (mtd->index != cxt->mtd_index || cxt->mtd_index < 0)
 		return;
 
-	/* 
-	 *  Once ready is 0 and we've held the lock no further writes to the 
-	 *  buffer will happen
-	 */
-	spin_lock_irqsave(&cxt->writecount_lock, flags);
-	if (!cxt->ready) {
-		spin_unlock_irqrestore(&cxt->writecount_lock, flags);
+	if (mtd->size < mtd->erasesize * 2) {
+		printk(KERN_ERR "mtdoops: MTD partition %d not big enough for mtdoops\n",
+		       mtd->index);
 		return;
 	}
-	cxt->ready = 0;
-	spin_unlock_irqrestore(&cxt->writecount_lock, flags);
-
-	if (mtd->panic_write && in_interrupt())
-		/* Interrupt context, we're going to panic so try and log */
-		mtdoops_write(cxt, 1);
-	else
-		schedule_work(&cxt->work_write);
-}
-
-static void
-mtdoops_console_write(struct console *co, const char *s, unsigned int count)
-{
-	struct mtdoops_context *cxt = co->data;
-	struct mtd_info *mtd = cxt->mtd;
-	unsigned long flags;
-
-	if (!oops_in_progress) {
-		mtdoops_console_sync();
+	if (mtd->erasesize < record_size) {
+		printk(KERN_ERR "mtdoops: eraseblock size of MTD partition %d too small\n",
+		       mtd->index);
 		return;
 	}
-
-	if (!cxt->ready || !mtd)
+	if (mtd->size > MTDOOPS_MAX_MTD_SIZE) {
+		printk(KERN_ERR "mtdoops: mtd%d is too large (limit is %d MiB)\n",
+		       mtd->index, MTDOOPS_MAX_MTD_SIZE / 1024 / 1024);
 		return;
+	}
 
-	/* Locking on writecount ensures sequential writes to the buffer */
-	spin_lock_irqsave(&cxt->writecount_lock, flags);
-
-	/* Check ready status didn't change whilst waiting for the lock */
-	if (!cxt->ready) {
-		spin_unlock_irqrestore(&cxt->writecount_lock, flags);
+	/* oops_page_used is a bit field */
+	cxt->oops_page_used = vmalloc(DIV_ROUND_UP(mtdoops_pages,
+			BITS_PER_LONG));
+	if (!cxt->oops_page_used) {
+		printk(KERN_ERR "mtdoops: could not allocate page array\n");
 		return;
 	}
 
-	if (cxt->writecount == 0) {
-		u32 *stamp = cxt->oops_buf;
-		*stamp++ = cxt->nextcount;
-		*stamp = MTDOOPS_KERNMSG_MAGIC;
-		cxt->writecount = 8;
+	cxt->dump.dump = mtdoops_do_dump;
+	err = kmsg_dump_register(&cxt->dump);
+	if (err) {
+		printk(KERN_ERR "mtdoops: registering kmsg dumper failed, error %d\n", err);
+		vfree(cxt->oops_page_used);
+		cxt->oops_page_used = NULL;
+		return;
 	}
 
-	if ((count + cxt->writecount) > OOPS_PAGE_SIZE)
-		count = OOPS_PAGE_SIZE - cxt->writecount;
-
-	memcpy(cxt->oops_buf + cxt->writecount, s, count);
-	cxt->writecount += count;
-
-	spin_unlock_irqrestore(&cxt->writecount_lock, flags);
-
-	if (cxt->writecount == OOPS_PAGE_SIZE)
-		mtdoops_console_sync();
+	cxt->mtd = mtd;
+	cxt->oops_pages = (int)mtd->size / record_size;
+	find_next_position(cxt);
+	printk(KERN_INFO "mtdoops: Attached to MTD device %d\n", mtd->index);
 }
 
-static int __init mtdoops_console_setup(struct console *co, char *options)
+static void mtdoops_notify_remove(struct mtd_info *mtd)
 {
-	struct mtdoops_context *cxt = co->data;
+	struct mtdoops_context *cxt = &oops_cxt;
 
-	if (cxt->mtd_index != -1 || cxt->name)
-		return -EBUSY;
-	if (options) {
-		cxt->name = kstrdup(options, GFP_KERNEL);
-		return 0;
-	}
-	if (co->index == -1)
-		return -EINVAL;
+	if (mtd->index != cxt->mtd_index || cxt->mtd_index < 0)
+		return;
 
-	cxt->mtd_index = co->index;
-	return 0;
+	if (kmsg_dump_unregister(&cxt->dump) < 0)
+		printk(KERN_WARNING "mtdoops: could not unregister kmsg_dumper\n");
+
+	cxt->mtd = NULL;
+	flush_scheduled_work();
 }
 
+
 static struct mtd_notifier mtdoops_notifier = {
 	.add	= mtdoops_notify_add,
 	.remove	= mtdoops_notify_remove,
 };
 
-static struct console mtdoops_console = {
-	.name		= "ttyMTD",
-	.write		= mtdoops_console_write,
-	.setup		= mtdoops_console_setup,
-	.unblank	= mtdoops_console_sync,
-	.index		= -1,
-	.data		= &oops_cxt,
-};
-
-static int __init mtdoops_console_init(void)
+static int __init mtdoops_init(void)
 {
 	struct mtdoops_context *cxt = &oops_cxt;
+	int mtd_index;
+	char *endp;
 
+	if (strlen(mtddev) == 0) {
+		printk(KERN_ERR "mtdoops: mtd device (mtddev=name/number) must be supplied\n");
+		return -EINVAL;
+	}
+	if ((record_size & 4095) != 0) {
+		printk(KERN_ERR "mtdoops: record_size must be a multiple of 4096\n");
+		return -EINVAL;
+	}
+	if (record_size < 4096) {
+		printk(KERN_ERR "mtdoops: record_size must be over 4096 bytes\n");
+		return -EINVAL;
+	}
+
+	/* Setup the MTD device to use */
 	cxt->mtd_index = -1;
-	cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE);
-	spin_lock_init(&cxt->writecount_lock);
+	mtd_index = simple_strtoul(mtddev, &endp, 0);
+	if (*endp == '\0')
+		cxt->mtd_index = mtd_index;
+	if (cxt->mtd_index > MAX_MTD_DEVICES) {
+		printk(KERN_ERR "mtdoops: invalid mtd device number (%u) given\n",
+				mtd_index);
+		return -EINVAL;
+	}
 
+	cxt->oops_buf = vmalloc(record_size);
 	if (!cxt->oops_buf) {
-		printk(KERN_ERR "Failed to allocate mtdoops buffer workspace\n");
+		printk(KERN_ERR "mtdoops: failed to allocate buffer workspace\n");
 		return -ENOMEM;
 	}
+	memset(cxt->oops_buf, 0xff, record_size);
 
 	INIT_WORK(&cxt->work_erase, mtdoops_workfunc_erase);
 	INIT_WORK(&cxt->work_write, mtdoops_workfunc_write);
 
-	register_console(&mtdoops_console);
 	register_mtd_user(&mtdoops_notifier);
 	return 0;
 }
 
-static void __exit mtdoops_console_exit(void)
+static void __exit mtdoops_exit(void)
 {
 	struct mtdoops_context *cxt = &oops_cxt;
 
 	unregister_mtd_user(&mtdoops_notifier);
-	unregister_console(&mtdoops_console);
-	kfree(cxt->name);
 	vfree(cxt->oops_buf);
+	vfree(cxt->oops_page_used);
 }
 
 
-subsys_initcall(mtdoops_console_init);
-module_exit(mtdoops_console_exit);
+module_init(mtdoops_init);
+module_exit(mtdoops_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 0e35e1aefd2..7678538344f 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -201,6 +201,22 @@ config MTD_NAND_S3C2410_CLKSTOP
 	  when the is NAND chip selected or released, but will save
 	  approximately 5mA of power when there is nothing happening.
 
+config MTD_NAND_BCM_UMI
+	tristate "NAND Flash support for BCM Reference Boards"
+	depends on ARCH_BCMRING && MTD_NAND
+	help
+	  This enables the NAND flash controller on the BCM UMI block.
+
+	  No board specfic support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_BCM_UMI_HWCS
+	bool "BCM UMI NAND Hardware CS"
+	depends on MTD_NAND_BCM_UMI
+	help
+	  Enable the use of the BCM UMI block's internal CS using NAND.
+	  This should only be used if you know the external NAND CS can toggle.
+
 config MTD_NAND_DISKONCHIP
 	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 6950d3dabf1..460a1f39a8d 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -42,5 +42,6 @@ obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
 obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
 obj-$(CONFIG_MTD_NAND_W90P910)		+= w90p910_nand.o
 obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
+obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
index 6d9649159a1..2d6773281fd 100644
--- a/drivers/mtd/nand/alauda.c
+++ b/drivers/mtd/nand/alauda.c
@@ -372,15 +372,6 @@ static int alauda_read_oob(struct mtd_info *mtd, loff_t from, void *oob)
 	return __alauda_read_page(mtd, from, ignore_buf, oob);
 }
 
-static int popcount8(u8 c)
-{
-	int ret = 0;
-
-	for ( ; c; c>>=1)
-		ret += c & 1;
-	return ret;
-}
-
 static int alauda_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	u8 oob[16];
@@ -391,7 +382,7 @@ static int alauda_isbad(struct mtd_info *mtd, loff_t ofs)
 		return err;
 
 	/* A block is marked bad if two or more bits are zero */
-	return popcount8(oob[5]) >= 7 ? 0 : 1;
+	return hweight8(oob[5]) >= 7 ? 0 : 1;
 }
 
 static int alauda_bounce_read(struct mtd_info *mtd, loff_t from, size_t len,
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index f8e9975c86e..524e6c9e067 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -192,7 +192,6 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct atmel_nand_host *host = nand_chip->priv;
-	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
 	unsigned int ecc_value;
 
 	/* get the first 2 ECC bytes */
@@ -464,7 +463,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	if (host->board->det_pin) {
 		if (gpio_get_value(host->board->det_pin)) {
 			printk(KERN_INFO "No SmartMedia card inserted.\n");
-			res = ENXIO;
+			res = -ENXIO;
 			goto err_no_card;
 		}
 	}
@@ -535,7 +534,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	if ((!partitions) || (num_partitions == 0)) {
 		printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n");
-		res = ENXIO;
+		res = -ENXIO;
 		goto err_no_partitions;
 	}
 
diff --git a/drivers/mtd/nand/bcm_umi_bch.c b/drivers/mtd/nand/bcm_umi_bch.c
new file mode 100644
index 00000000000..a930666d068
--- /dev/null
+++ b/drivers/mtd/nand/bcm_umi_bch.c
@@ -0,0 +1,213 @@
+/*****************************************************************************
+* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include "nand_bcm_umi.h"
+
+/* ---- External Variable Declarations ----------------------------------- */
+/* ---- External Function Prototypes ------------------------------------- */
+/* ---- Public Variables ------------------------------------------------- */
+/* ---- Private Constants and Types -------------------------------------- */
+
+/* ---- Private Function Prototypes -------------------------------------- */
+static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
+	struct nand_chip *chip, uint8_t *buf, int page);
+static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
+	struct nand_chip *chip, const uint8_t *buf);
+
+/* ---- Private Variables ------------------------------------------------ */
+
+/*
+** nand_hw_eccoob
+** New oob placement block for use with hardware ecc generation.
+*/
+static struct nand_ecclayout nand_hw_eccoob_512 = {
+	/* Reserve 5 for BI indicator */
+	.oobfree = {
+#if (NAND_ECC_NUM_BYTES > 3)
+		    {.offset = 0, .length = 2}
+#else
+		    {.offset = 0, .length = 5},
+		    {.offset = 6, .length = 7}
+#endif
+		    }
+};
+
+/*
+** We treat the OOB for a 2K page as if it were 4 512 byte oobs,
+** except the BI is at byte 0.
+*/
+static struct nand_ecclayout nand_hw_eccoob_2048 = {
+	/* Reserve 0 as BI indicator */
+	.oobfree = {
+#if (NAND_ECC_NUM_BYTES > 10)
+		    {.offset = 1, .length = 2},
+#elif (NAND_ECC_NUM_BYTES > 7)
+		    {.offset = 1, .length = 5},
+		    {.offset = 16, .length = 6},
+		    {.offset = 32, .length = 6},
+		    {.offset = 48, .length = 6}
+#else
+		    {.offset = 1, .length = 8},
+		    {.offset = 16, .length = 9},
+		    {.offset = 32, .length = 9},
+		    {.offset = 48, .length = 9}
+#endif
+		    }
+};
+
+/* We treat the OOB for a 4K page as if it were 8 512 byte oobs,
+ * except the BI is at byte 0. */
+static struct nand_ecclayout nand_hw_eccoob_4096 = {
+	/* Reserve 0 as BI indicator */
+	.oobfree = {
+#if (NAND_ECC_NUM_BYTES > 10)
+		    {.offset = 1, .length = 2},
+		    {.offset = 16, .length = 3},
+		    {.offset = 32, .length = 3},
+		    {.offset = 48, .length = 3},
+		    {.offset = 64, .length = 3},
+		    {.offset = 80, .length = 3},
+		    {.offset = 96, .length = 3},
+		    {.offset = 112, .length = 3}
+#else
+		    {.offset = 1, .length = 5},
+		    {.offset = 16, .length = 6},
+		    {.offset = 32, .length = 6},
+		    {.offset = 48, .length = 6},
+		    {.offset = 64, .length = 6},
+		    {.offset = 80, .length = 6},
+		    {.offset = 96, .length = 6},
+		    {.offset = 112, .length = 6}
+#endif
+		    }
+};
+
+/* ---- Private Functions ------------------------------------------------ */
+/* ==== Public Functions ================================================= */
+
+/****************************************************************************
+*
+*  bcm_umi_bch_read_page_hwecc - hardware ecc based page read function
+*  @mtd:	mtd info structure
+*  @chip:	nand chip info structure
+*  @buf:	buffer to store read data
+*
+***************************************************************************/
+static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd,
+				       struct nand_chip *chip, uint8_t * buf,
+						 int page)
+{
+	int sectorIdx = 0;
+	int eccsize = chip->ecc.size;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *datap = buf;
+	uint8_t eccCalc[NAND_ECC_NUM_BYTES];
+	int sectorOobSize = mtd->oobsize / eccsteps;
+	int stat;
+
+	for (sectorIdx = 0; sectorIdx < eccsteps;
+			sectorIdx++, datap += eccsize) {
+		if (sectorIdx > 0) {
+			/* Seek to page location within sector */
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, sectorIdx * eccsize,
+				      -1);
+		}
+
+		/* Enable hardware ECC before reading the buf */
+		nand_bcm_umi_bch_enable_read_hwecc();
+
+		/* Read in data */
+		bcm_umi_nand_read_buf(mtd, datap, eccsize);
+
+		/* Pause hardware ECC after reading the buf */
+		nand_bcm_umi_bch_pause_read_ecc_calc();
+
+		/* Read the OOB ECC */
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+			      mtd->writesize + sectorIdx * sectorOobSize, -1);
+		nand_bcm_umi_bch_read_oobEcc(mtd->writesize, eccCalc,
+					     NAND_ECC_NUM_BYTES,
+					     chip->oob_poi +
+					     sectorIdx * sectorOobSize);
+
+		/* Correct any ECC detected errors */
+		stat =
+		    nand_bcm_umi_bch_correct_page(datap, eccCalc,
+						  NAND_ECC_NUM_BYTES);
+
+		/* Update Stats */
+		if (stat < 0) {
+#if defined(NAND_BCM_UMI_DEBUG)
+			printk(KERN_WARNING "%s uncorr_err sectorIdx=%d\n",
+			       __func__, sectorIdx);
+			printk(KERN_WARNING
+			       "%s data %02x %02x %02x %02x "
+					 "%02x %02x %02x %02x\n",
+			       __func__, datap[0], datap[1], datap[2], datap[3],
+			       datap[4], datap[5], datap[6], datap[7]);
+			printk(KERN_WARNING
+			       "%s ecc  %02x %02x %02x %02x "
+					 "%02x %02x %02x %02x %02x %02x "
+					 "%02x %02x %02x\n",
+			       __func__, eccCalc[0], eccCalc[1], eccCalc[2],
+			       eccCalc[3], eccCalc[4], eccCalc[5], eccCalc[6],
+			       eccCalc[7], eccCalc[8], eccCalc[9], eccCalc[10],
+			       eccCalc[11], eccCalc[12]);
+			BUG();
+#endif
+			mtd->ecc_stats.failed++;
+		} else {
+#if defined(NAND_BCM_UMI_DEBUG)
+			if (stat > 0) {
+				printk(KERN_INFO
+				       "%s %d correctable_errors detected\n",
+				       __func__, stat);
+			}
+#endif
+			mtd->ecc_stats.corrected += stat;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************
+*
+*  bcm_umi_bch_write_page_hwecc - hardware ecc based page write function
+*  @mtd:	mtd info structure
+*  @chip:	nand chip info structure
+*  @buf:	data buffer
+*
+***************************************************************************/
+static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd,
+	struct nand_chip *chip, const uint8_t *buf)
+{
+	int sectorIdx = 0;
+	int eccsize = chip->ecc.size;
+	int eccsteps = chip->ecc.steps;
+	const uint8_t *datap = buf;
+	uint8_t *oobp = chip->oob_poi;
+	int sectorOobSize = mtd->oobsize / eccsteps;
+
+	for (sectorIdx = 0; sectorIdx < eccsteps;
+	     sectorIdx++, datap += eccsize, oobp += sectorOobSize) {
+		/* Enable hardware ECC before writing the buf */
+		nand_bcm_umi_bch_enable_write_hwecc();
+		bcm_umi_nand_write_buf(mtd, datap, eccsize);
+		nand_bcm_umi_bch_write_oobEcc(mtd->writesize, oobp,
+					      NAND_ECC_NUM_BYTES);
+	}
+
+	bcm_umi_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
new file mode 100644
index 00000000000..087bcd745bb
--- /dev/null
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -0,0 +1,581 @@
+/*****************************************************************************
+* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+#include <asm/system.h>
+
+#include <mach/reg_nand.h>
+#include <mach/reg_umi.h>
+
+#include "nand_bcm_umi.h"
+
+#include <mach/memory_settings.h>
+
+#define USE_DMA 1
+#include <mach/dma.h>
+#include <linux/dma-mapping.h>
+#include <linux/completion.h>
+
+/* ---- External Variable Declarations ----------------------------------- */
+/* ---- External Function Prototypes ------------------------------------- */
+/* ---- Public Variables ------------------------------------------------- */
+/* ---- Private Constants and Types -------------------------------------- */
+static const __devinitconst char gBanner[] = KERN_INFO \
+	"BCM UMI MTD NAND Driver: 1.00\n";
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+#if NAND_ECC_BCH
+static uint8_t scan_ff_pattern[] = { 0xff };
+
+static struct nand_bbt_descr largepage_bbt = {
+	.options = 0,
+	.offs = 0,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+#endif
+
+/*
+** Preallocate a buffer to avoid having to do this every dma operation.
+** This is the size of the preallocated coherent DMA buffer.
+*/
+#if USE_DMA
+#define DMA_MIN_BUFLEN	512
+#define DMA_MAX_BUFLEN	PAGE_SIZE
+#define USE_DIRECT_IO(len)	(((len) < DMA_MIN_BUFLEN) || \
+	((len) > DMA_MAX_BUFLEN))
+
+/*
+ * The current NAND data space goes from 0x80001900 to 0x80001FFF,
+ * which is only 0x700 = 1792 bytes long. This is too small for 2K, 4K page
+ * size NAND flash. Need to break the DMA down to multiple 1Ks.
+ *
+ * Need to make sure REG_NAND_DATA_PADDR + DMA_MAX_LEN < 0x80002000
+ */
+#define DMA_MAX_LEN             1024
+
+#else /* !USE_DMA */
+#define DMA_MIN_BUFLEN          0
+#define DMA_MAX_BUFLEN          0
+#define USE_DIRECT_IO(len)      1
+#endif
+/* ---- Private Function Prototypes -------------------------------------- */
+static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len);
+static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf,
+				   int len);
+
+/* ---- Private Variables ------------------------------------------------ */
+static struct mtd_info *board_mtd;
+static void __iomem *bcm_umi_io_base;
+static void *virtPtr;
+static dma_addr_t physPtr;
+static struct completion nand_comp;
+
+/* ---- Private Functions ------------------------------------------------ */
+#if NAND_ECC_BCH
+#include "bcm_umi_bch.c"
+#else
+#include "bcm_umi_hamming.c"
+#endif
+
+#if USE_DMA
+
+/* Handler called when the DMA finishes. */
+static void nand_dma_handler(DMA_Device_t dev, int reason, void *userData)
+{
+	complete(&nand_comp);
+}
+
+static int nand_dma_init(void)
+{
+	int rc;
+
+	rc = dma_set_device_handler(DMA_DEVICE_NAND_MEM_TO_MEM,
+		nand_dma_handler, NULL);
+	if (rc != 0) {
+		printk(KERN_ERR "dma_set_device_handler failed: %d\n", rc);
+		return rc;
+	}
+
+	virtPtr =
+	    dma_alloc_coherent(NULL, DMA_MAX_BUFLEN, &physPtr, GFP_KERNEL);
+	if (virtPtr == NULL) {
+		printk(KERN_ERR "NAND - Failed to allocate memory for DMA buffer\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void nand_dma_term(void)
+{
+	if (virtPtr != NULL)
+		dma_free_coherent(NULL, DMA_MAX_BUFLEN, virtPtr, physPtr);
+}
+
+static void nand_dma_read(void *buf, int len)
+{
+	int offset = 0;
+	int tmp_len = 0;
+	int len_left = len;
+	DMA_Handle_t hndl;
+
+	if (virtPtr == NULL)
+		panic("nand_dma_read: virtPtr == NULL\n");
+
+	if ((void *)physPtr == NULL)
+		panic("nand_dma_read: physPtr == NULL\n");
+
+	hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM);
+	if (hndl < 0) {
+		printk(KERN_ERR
+		       "nand_dma_read: unable to allocate dma channel: %d\n",
+		       (int)hndl);
+		panic("\n");
+	}
+
+	while (len_left > 0) {
+		if (len_left > DMA_MAX_LEN) {
+			tmp_len = DMA_MAX_LEN;
+			len_left -= DMA_MAX_LEN;
+		} else {
+			tmp_len = len_left;
+			len_left = 0;
+		}
+
+		init_completion(&nand_comp);
+		dma_transfer_mem_to_mem(hndl, REG_NAND_DATA_PADDR,
+					physPtr + offset, tmp_len);
+		wait_for_completion(&nand_comp);
+
+		offset += tmp_len;
+	}
+
+	dma_free_channel(hndl);
+
+	if (buf != NULL)
+		memcpy(buf, virtPtr, len);
+}
+
+static void nand_dma_write(const void *buf, int len)
+{
+	int offset = 0;
+	int tmp_len = 0;
+	int len_left = len;
+	DMA_Handle_t hndl;
+
+	if (buf == NULL)
+		panic("nand_dma_write: buf == NULL\n");
+
+	if (virtPtr == NULL)
+		panic("nand_dma_write: virtPtr == NULL\n");
+
+	if ((void *)physPtr == NULL)
+		panic("nand_dma_write: physPtr == NULL\n");
+
+	memcpy(virtPtr, buf, len);
+
+
+	hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM);
+	if (hndl < 0) {
+		printk(KERN_ERR
+		       "nand_dma_write: unable to allocate dma channel: %d\n",
+		       (int)hndl);
+		panic("\n");
+	}
+
+	while (len_left > 0) {
+		if (len_left > DMA_MAX_LEN) {
+			tmp_len = DMA_MAX_LEN;
+			len_left -= DMA_MAX_LEN;
+		} else {
+			tmp_len = len_left;
+			len_left = 0;
+		}
+
+		init_completion(&nand_comp);
+		dma_transfer_mem_to_mem(hndl, physPtr + offset,
+					REG_NAND_DATA_PADDR, tmp_len);
+		wait_for_completion(&nand_comp);
+
+		offset += tmp_len;
+	}
+
+	dma_free_channel(hndl);
+}
+
+#endif
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return nand_bcm_umi_dev_ready();
+}
+
+/****************************************************************************
+*
+*  bcm_umi_nand_inithw
+*
+*   This routine does the necessary hardware (board-specific)
+*   initializations.  This includes setting up the timings, etc.
+*
+***************************************************************************/
+int bcm_umi_nand_inithw(void)
+{
+	/* Configure nand timing parameters */
+	REG_UMI_NAND_TCR &= ~0x7ffff;
+	REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR;
+
+#if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS)
+	/* enable software control of CS */
+	REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL;
+#endif
+
+	/* keep NAND chip select asserted */
+	REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED;
+
+	REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16;
+	/* enable writes to flash */
+	REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP;
+
+	writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET);
+	nand_bcm_umi_wait_till_ready();
+
+#if NAND_ECC_BCH
+	nand_bcm_umi_bch_config_ecc(NAND_ECC_NUM_BYTES);
+#endif
+
+	return 0;
+}
+
+/* Used to turn latch the proper register for access. */
+static void bcm_umi_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+				   unsigned int ctrl)
+{
+	/* send command to hardware */
+	struct nand_chip *chip = mtd->priv;
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_CLE) {
+			chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_CMD_OFFSET;
+			goto CMD;
+		}
+		if (ctrl & NAND_ALE) {
+			chip->IO_ADDR_W =
+			    bcm_umi_io_base + REG_NAND_ADDR_OFFSET;
+			goto CMD;
+		}
+		chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
+	}
+
+CMD:
+	/* Send command to chip directly */
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf,
+				   int len)
+{
+	if (USE_DIRECT_IO(len)) {
+		/* Do it the old way if the buffer is small or too large.
+		 * Probably quicker than starting and checking dma. */
+		int i;
+		struct nand_chip *this = mtd->priv;
+
+		for (i = 0; i < len; i++)
+			writeb(buf[i], this->IO_ADDR_W);
+	}
+#if USE_DMA
+	else
+		nand_dma_write(buf, len);
+#endif
+}
+
+static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len)
+{
+	if (USE_DIRECT_IO(len)) {
+		int i;
+		struct nand_chip *this = mtd->priv;
+
+		for (i = 0; i < len; i++)
+			buf[i] = readb(this->IO_ADDR_R);
+	}
+#if USE_DMA
+	else
+		nand_dma_read(buf, len);
+#endif
+}
+
+static uint8_t readbackbuf[NAND_MAX_PAGESIZE];
+static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf,
+				   int len)
+{
+	/*
+	 * Try to readback page with ECC correction. This is necessary
+	 * for MLC parts which may have permanently stuck bits.
+	 */
+	struct nand_chip *chip = mtd->priv;
+	int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0);
+	if (ret < 0)
+		return -EFAULT;
+	else {
+		if (memcmp(readbackbuf, buf, len) == 0)
+			return 0;
+
+		return -EFAULT;
+	}
+	return 0;
+}
+
+static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
+{
+	struct nand_chip *this;
+	struct resource *r;
+	int err = 0;
+
+	printk(gBanner);
+
+	/* Allocate memory for MTD device structure and private data */
+	board_mtd =
+	    kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip),
+		    GFP_KERNEL);
+	if (!board_mtd) {
+		printk(KERN_WARNING
+		       "Unable to allocate NAND MTD device structure.\n");
+		return -ENOMEM;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!r)
+		return -ENXIO;
+
+	/* map physical adress */
+	bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1);
+
+	if (!bcm_umi_io_base) {
+		printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n");
+		kfree(board_mtd);
+		return -EIO;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *)(&board_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *)board_mtd, 0, sizeof(struct mtd_info));
+	memset((char *)this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	board_mtd->priv = this;
+
+	/* Initialize the NAND hardware.  */
+	if (bcm_umi_nand_inithw() < 0) {
+		printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n");
+		iounmap(bcm_umi_io_base);
+		kfree(board_mtd);
+		return -EIO;
+	}
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
+	this->IO_ADDR_R = bcm_umi_io_base + REG_NAND_DATA8_OFFSET;
+
+	/* Set command delay time, see datasheet for correct value */
+	this->chip_delay = 0;
+	/* Assign the device ready function, if available */
+	this->dev_ready = nand_dev_ready;
+	this->options = 0;
+
+	this->write_buf = bcm_umi_nand_write_buf;
+	this->read_buf = bcm_umi_nand_read_buf;
+	this->verify_buf = bcm_umi_nand_verify_buf;
+
+	this->cmd_ctrl = bcm_umi_nand_hwcontrol;
+	this->ecc.mode = NAND_ECC_HW;
+	this->ecc.size = 512;
+	this->ecc.bytes = NAND_ECC_NUM_BYTES;
+#if NAND_ECC_BCH
+	this->ecc.read_page = bcm_umi_bch_read_page_hwecc;
+	this->ecc.write_page = bcm_umi_bch_write_page_hwecc;
+#else
+	this->ecc.correct = nand_correct_data512;
+	this->ecc.calculate = bcm_umi_hamming_get_hw_ecc;
+	this->ecc.hwctl = bcm_umi_hamming_enable_hwecc;
+#endif
+
+#if USE_DMA
+	err = nand_dma_init();
+	if (err != 0)
+		return err;
+#endif
+
+	/* Figure out the size of the device that we have.
+	 * We need to do this to figure out which ECC
+	 * layout we'll be using.
+	 */
+
+	err = nand_scan_ident(board_mtd, 1);
+	if (err) {
+		printk(KERN_ERR "nand_scan failed: %d\n", err);
+		iounmap(bcm_umi_io_base);
+		kfree(board_mtd);
+		return err;
+	}
+
+	/* Now that we know the nand size, we can setup the ECC layout */
+
+	switch (board_mtd->writesize) {	/* writesize is the pagesize */
+	case 4096:
+		this->ecc.layout = &nand_hw_eccoob_4096;
+		break;
+	case 2048:
+		this->ecc.layout = &nand_hw_eccoob_2048;
+		break;
+	case 512:
+		this->ecc.layout = &nand_hw_eccoob_512;
+		break;
+	default:
+		{
+			printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n",
+					 board_mtd->writesize);
+			return -EINVAL;
+		}
+	}
+
+#if NAND_ECC_BCH
+	if (board_mtd->writesize > 512) {
+		if (this->options & NAND_USE_FLASH_BBT)
+			largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
+		this->badblock_pattern = &largepage_bbt;
+	}
+#endif
+
+	/* Now finish off the scan, now that ecc.layout has been initialized. */
+
+	err = nand_scan_tail(board_mtd);
+	if (err) {
+		printk(KERN_ERR "nand_scan failed: %d\n", err);
+		iounmap(bcm_umi_io_base);
+		kfree(board_mtd);
+		return err;
+	}
+
+	/* Register the partitions */
+	{
+		int nr_partitions;
+		struct mtd_partition *partition_info;
+
+		board_mtd->name = "bcm_umi-nand";
+		nr_partitions =
+		    parse_mtd_partitions(board_mtd, part_probes,
+					 &partition_info, 0);
+
+		if (nr_partitions <= 0) {
+			printk(KERN_ERR "BCM UMI NAND: Too few partitions - %d\n",
+			       nr_partitions);
+			iounmap(bcm_umi_io_base);
+			kfree(board_mtd);
+			return -EIO;
+		}
+		add_mtd_partitions(board_mtd, partition_info, nr_partitions);
+	}
+
+	/* Return happy */
+	return 0;
+}
+
+static int bcm_umi_nand_remove(struct platform_device *pdev)
+{
+#if USE_DMA
+	nand_dma_term();
+#endif
+
+	/* Release resources, unregister device */
+	nand_release(board_mtd);
+
+	/* unmap physical adress */
+	iounmap(bcm_umi_io_base);
+
+	/* Free the MTD device structure */
+	kfree(board_mtd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bcm_umi_nand_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	printk(KERN_ERR "MTD NAND suspend is being called\n");
+	return 0;
+}
+
+static int bcm_umi_nand_resume(struct platform_device *pdev)
+{
+	printk(KERN_ERR "MTD NAND resume is being called\n");
+	return 0;
+}
+#else
+#define bcm_umi_nand_suspend   NULL
+#define bcm_umi_nand_resume    NULL
+#endif
+
+static struct platform_driver nand_driver = {
+	.driver = {
+		   .name = "bcm-nand",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = bcm_umi_nand_probe,
+	.remove = bcm_umi_nand_remove,
+	.suspend = bcm_umi_nand_suspend,
+	.resume = bcm_umi_nand_resume,
+};
+
+static int __init nand_init(void)
+{
+	return platform_driver_register(&nand_driver);
+}
+
+static void __exit nand_exit(void)
+{
+	platform_driver_unregister(&nand_driver);
+}
+
+module_init(nand_init);
+module_exit(nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("BCM UMI MTD NAND driver");
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index f13f5b9afaf..fe3eba87de4 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -591,6 +591,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 
 	/* options such as NAND_USE_FLASH_BBT or 16-bit widths */
 	info->chip.options	= pdata->options;
+	info->chip.bbt_td	= pdata->bbt_td;
+	info->chip.bbt_md	= pdata->bbt_md;
 
 	info->ioaddr		= (uint32_t __force) vaddr;
 
@@ -599,7 +601,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->mask_chipsel	= pdata->mask_chipsel;
 
 	/* use nandboot-capable ALE/CLE masks by default */
-	info->mask_ale		= pdata->mask_cle ? : MASK_ALE;
+	info->mask_ale		= pdata->mask_ale ? : MASK_ALE;
 	info->mask_cle		= pdata->mask_cle ? : MASK_CLE;
 
 	/* Set address of hardware control function */
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
index 72446fb48d4..af6a6a5399e 100644
--- a/drivers/mtd/nand/excite_nandflash.c
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -128,7 +128,7 @@ static int excite_nand_devready(struct mtd_info *mtd)
  * The binding to the mtd and all allocated
  * resources are released.
  */
-static int __exit excite_nand_remove(struct platform_device *dev)
+static int __devexit excite_nand_remove(struct platform_device *dev)
 {
 	struct excite_nand_drvdata * const this = platform_get_drvdata(dev);
 
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index ddd37d2554e..ae30fb6eed9 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -237,12 +237,15 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 
 	ctrl->use_mdr = 0;
 
-	dev_vdbg(ctrl->dev,
-	         "fsl_elbc_run_command: stat=%08x mdr=%08x fmr=%08x\n",
-	         ctrl->status, ctrl->mdr, in_be32(&lbc->fmr));
+	if (ctrl->status != LTESR_CC) {
+		dev_info(ctrl->dev,
+		         "command failed: fir %x fcr %x status %x mdr %x\n",
+		         in_be32(&lbc->fir), in_be32(&lbc->fcr),
+		         ctrl->status, ctrl->mdr);
+		return -EIO;
+	}
 
-	/* returns 0 on success otherwise non-zero) */
-	return ctrl->status == LTESR_CC ? 0 : -EIO;
+	return 0;
 }
 
 static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
@@ -253,17 +256,17 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
 
 	if (priv->page_size) {
 		out_be32(&lbc->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
 		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
-		         (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+		         (FIR_OP_CM1 << FIR_OP3_SHIFT) |
 		         (FIR_OP_RBW << FIR_OP4_SHIFT));
 
 		out_be32(&lbc->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
 		                    (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
 	} else {
 		out_be32(&lbc->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
 		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
 		         (FIR_OP_RBW << FIR_OP3_SHIFT));
@@ -332,7 +335,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 	case NAND_CMD_READID:
 		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
 
-		out_be32(&lbc->fir, (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		                    (FIR_OP_UA  << FIR_OP1_SHIFT) |
 		                    (FIR_OP_RBW << FIR_OP2_SHIFT));
 		out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
@@ -359,16 +362,20 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		dev_vdbg(ctrl->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
 
 		out_be32(&lbc->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+		         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 		         (FIR_OP_PA  << FIR_OP1_SHIFT) |
-		         (FIR_OP_CM1 << FIR_OP2_SHIFT));
+		         (FIR_OP_CM2 << FIR_OP2_SHIFT) |
+		         (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+		         (FIR_OP_RS  << FIR_OP4_SHIFT));
 
 		out_be32(&lbc->fcr,
 		         (NAND_CMD_ERASE1 << FCR_CMD0_SHIFT) |
-		         (NAND_CMD_ERASE2 << FCR_CMD1_SHIFT));
+		         (NAND_CMD_STATUS << FCR_CMD1_SHIFT) |
+		         (NAND_CMD_ERASE2 << FCR_CMD2_SHIFT));
 
 		out_be32(&lbc->fbcr, 0);
 		ctrl->read_bytes = 0;
+		ctrl->use_mdr = 1;
 
 		fsl_elbc_run_command(mtd);
 		return;
@@ -383,40 +390,41 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
 		ctrl->column = column;
 		ctrl->oob = 0;
+		ctrl->use_mdr = 1;
 
-		if (priv->page_size) {
-			fcr = (NAND_CMD_SEQIN << FCR_CMD0_SHIFT) |
-			      (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT);
+		fcr = (NAND_CMD_STATUS   << FCR_CMD1_SHIFT) |
+		      (NAND_CMD_SEQIN    << FCR_CMD2_SHIFT) |
+		      (NAND_CMD_PAGEPROG << FCR_CMD3_SHIFT);
 
+		if (priv->page_size) {
 			out_be32(&lbc->fir,
-			         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			         (FIR_OP_CM2 << FIR_OP0_SHIFT) |
 			         (FIR_OP_CA  << FIR_OP1_SHIFT) |
 			         (FIR_OP_PA  << FIR_OP2_SHIFT) |
 			         (FIR_OP_WB  << FIR_OP3_SHIFT) |
-			         (FIR_OP_CW1 << FIR_OP4_SHIFT));
+			         (FIR_OP_CM3 << FIR_OP4_SHIFT) |
+			         (FIR_OP_CW1 << FIR_OP5_SHIFT) |
+			         (FIR_OP_RS  << FIR_OP6_SHIFT));
 		} else {
-			fcr = (NAND_CMD_PAGEPROG << FCR_CMD1_SHIFT) |
-			      (NAND_CMD_SEQIN << FCR_CMD2_SHIFT);
-
 			out_be32(&lbc->fir,
-			         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			         (FIR_OP_CM0 << FIR_OP0_SHIFT) |
 			         (FIR_OP_CM2 << FIR_OP1_SHIFT) |
 			         (FIR_OP_CA  << FIR_OP2_SHIFT) |
 			         (FIR_OP_PA  << FIR_OP3_SHIFT) |
 			         (FIR_OP_WB  << FIR_OP4_SHIFT) |
-			         (FIR_OP_CW1 << FIR_OP5_SHIFT));
+			         (FIR_OP_CM3 << FIR_OP5_SHIFT) |
+			         (FIR_OP_CW1 << FIR_OP6_SHIFT) |
+			         (FIR_OP_RS  << FIR_OP7_SHIFT));
 
 			if (column >= mtd->writesize) {
 				/* OOB area --> READOOB */
 				column -= mtd->writesize;
 				fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
 				ctrl->oob = 1;
-			} else if (column < 256) {
+			} else {
+				WARN_ON(column != 0);
 				/* First 256 bytes --> READ0 */
 				fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
-			} else {
-				/* Second 256 bytes --> READ1 */
-				fcr |= NAND_CMD_READ1 << FCR_CMD0_SHIFT;
 			}
 		}
 
@@ -628,22 +636,6 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
 	struct fsl_elbc_mtd *priv = chip->priv;
 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
-
-	if (ctrl->status != LTESR_CC)
-		return NAND_STATUS_FAIL;
-
-	/* Use READ_STATUS command, but wait for the device to be ready */
-	ctrl->use_mdr = 0;
-	out_be32(&lbc->fir,
-	         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
-	         (FIR_OP_RBW << FIR_OP1_SHIFT));
-	out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
-	out_be32(&lbc->fbcr, 1);
-	set_addr(mtd, 0, 0, 0);
-	ctrl->read_bytes = 1;
-
-	fsl_elbc_run_command(mtd);
 
 	if (ctrl->status != LTESR_CC)
 		return NAND_STATUS_FAIL;
@@ -651,8 +643,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	/* The chip always seems to report that it is
 	 * write-protected, even when it is not.
 	 */
-	setbits8(ctrl->addr, NAND_STATUS_WP);
-	return fsl_elbc_read_byte(mtd);
+	return (ctrl->mdr & 0xff) | NAND_STATUS_WP;
 }
 
 static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
@@ -946,6 +937,13 @@ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
 {
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 
+	/*
+	 * NAND transactions can tie up the bus for a long time, so set the
+	 * bus timeout to max by clearing LBCR[BMT] (highest base counter
+	 * value) and setting LBCR[BMTPS] to the highest prescaler value.
+	 */
+	clrsetbits_be32(&lbc->lbcr, LBCR_BMT, 15);
+
 	/* clear event registers */
 	setbits32(&lbc->ltesr, LTESR_NAND_MASK);
 	out_be32(&lbc->lteatr, 0);
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index d120cd8d726..071a60cb420 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -112,7 +112,7 @@ static void fun_select_chip(struct mtd_info *mtd, int mchip_nr)
 
 	if (mchip_nr == -1) {
 		chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
-	} else if (mchip_nr >= 0) {
+	} else if (mchip_nr >= 0 && mchip_nr < NAND_MAX_CHIPS) {
 		fun->mchip_number = mchip_nr;
 		chip->IO_ADDR_R = fun->io_base + fun->mchip_offsets[mchip_nr];
 		chip->IO_ADDR_W = chip->IO_ADDR_R;
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 65b26d5a5c0..45dec5770da 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -33,9 +33,13 @@
 
 #include <asm/mach/flash.h>
 #include <mach/mxc_nand.h>
+#include <mach/hardware.h>
 
 #define DRIVER_NAME "mxc_nand"
 
+#define nfc_is_v21()		(cpu_is_mx25() || cpu_is_mx35())
+#define nfc_is_v1()		(cpu_is_mx31() || cpu_is_mx27())
+
 /* Addresses for NFC registers */
 #define NFC_BUF_SIZE		0xE00
 #define NFC_BUF_ADDR		0xE04
@@ -46,24 +50,14 @@
 #define NFC_RSLTMAIN_AREA	0xE0E
 #define NFC_RSLTSPARE_AREA	0xE10
 #define NFC_WRPROT		0xE12
-#define NFC_UNLOCKSTART_BLKADDR	0xE14
-#define NFC_UNLOCKEND_BLKADDR	0xE16
+#define NFC_V1_UNLOCKSTART_BLKADDR	0xe14
+#define NFC_V1_UNLOCKEND_BLKADDR	0xe16
+#define NFC_V21_UNLOCKSTART_BLKADDR	0xe20
+#define NFC_V21_UNLOCKEND_BLKADDR	0xe22
 #define NFC_NF_WRPRST		0xE18
 #define NFC_CONFIG1		0xE1A
 #define NFC_CONFIG2		0xE1C
 
-/* Addresses for NFC RAM BUFFER Main area 0 */
-#define MAIN_AREA0		0x000
-#define MAIN_AREA1		0x200
-#define MAIN_AREA2		0x400
-#define MAIN_AREA3		0x600
-
-/* Addresses for NFC SPARE BUFFER Spare area 0 */
-#define SPARE_AREA0		0x800
-#define SPARE_AREA1		0x810
-#define SPARE_AREA2		0x820
-#define SPARE_AREA3		0x830
-
 /* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
  * for Command operation */
 #define NFC_CMD            0x1
@@ -106,48 +100,66 @@ struct mxc_nand_host {
 	struct mtd_partition	*parts;
 	struct device		*dev;
 
+	void			*spare0;
+	void			*main_area0;
+	void			*main_area1;
+
+	void __iomem		*base;
 	void __iomem		*regs;
-	int			spare_only;
 	int			status_request;
-	int			pagesize_2k;
-	uint16_t		col_addr;
 	struct clk		*clk;
 	int			clk_act;
 	int			irq;
 
 	wait_queue_head_t	irq_waitq;
-};
-
-/* Define delays in microsec for NAND device operations */
-#define TROP_US_DELAY   2000
-/* Macros to get byte and bit positions of ECC */
-#define COLPOS(x)  ((x) >> 3)
-#define BITPOS(x) ((x) & 0xf)
 
-/* Define single bit Error positions in Main & Spare area */
-#define MAIN_SINGLEBIT_ERROR 0x4
-#define SPARE_SINGLEBIT_ERROR 0x1
-
-/* OOB placement block for use with hardware ecc generation */
-static struct nand_ecclayout nand_hw_eccoob_8 = {
-	.eccbytes = 5,
-	.eccpos = {6, 7, 8, 9, 10},
-	.oobfree = {{0, 5}, {11, 5}, }
+	uint8_t			*data_buf;
+	unsigned int		buf_start;
+	int			spare_len;
 };
 
-static struct nand_ecclayout nand_hw_eccoob_16 = {
+/* OOB placement block for use with hardware ecc generation */
+static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
 	.eccbytes = 5,
 	.eccpos = {6, 7, 8, 9, 10},
-	.oobfree = {{0, 5}, {11, 5}, }
+	.oobfree = {{0, 5}, {12, 4}, }
 };
 
-static struct nand_ecclayout nand_hw_eccoob_64 = {
+static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
 	.eccbytes = 20,
 	.eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
 		   38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
 	.oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
 };
 
+/* OOB description for 512 byte pages with 16 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
+	.eccbytes = 1 * 9,
+	.eccpos = {
+		 7,  8,  9, 10, 11, 12, 13, 14, 15
+	},
+	.oobfree = {
+		{.offset = 0, .length = 5}
+	}
+};
+
+/* OOB description for 2048 byte pages with 64 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
+	.eccbytes = 4 * 9,
+	.eccpos = {
+		 7,  8,  9, 10, 11, 12, 13, 14, 15,
+		23, 24, 25, 26, 27, 28, 29, 30, 31,
+		39, 40, 41, 42, 43, 44, 45, 46, 47,
+		55, 56, 57, 58, 59, 60, 61, 62, 63
+	},
+	.oobfree = {
+		{.offset = 2, .length = 4},
+		{.offset = 16, .length = 7},
+		{.offset = 32, .length = 7},
+		{.offset = 48, .length = 7}
+	}
+};
+
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
 #endif
@@ -170,10 +182,10 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
 /* This function polls the NANDFC to wait for the basic operation to
  * complete by checking the INT bit of config2 register.
  */
-static void wait_op_done(struct mxc_nand_host *host, int max_retries,
-				uint16_t param, int useirq)
+static void wait_op_done(struct mxc_nand_host *host, int useirq)
 {
 	uint32_t tmp;
+	int max_retries = 2000;
 
 	if (useirq) {
 		if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
@@ -200,8 +212,8 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
 			udelay(1);
 		}
 		if (max_retries < 0)
-			DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
-			      __func__, param);
+			DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
+			      __func__);
 	}
 }
 
@@ -215,7 +227,7 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 	writew(NFC_CMD, host->regs + NFC_CONFIG2);
 
 	/* Wait for operation to complete */
-	wait_op_done(host, TROP_US_DELAY, cmd, useirq);
+	wait_op_done(host, useirq);
 }
 
 /* This function sends an address (or partial address) to the
@@ -229,82 +241,47 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
 	writew(NFC_ADDR, host->regs + NFC_CONFIG2);
 
 	/* Wait for operation to complete */
-	wait_op_done(host, TROP_US_DELAY, addr, islast);
+	wait_op_done(host, islast);
 }
 
-/* This function requests the NANDFC to initate the transfer
- * of data currently in the NANDFC RAM buffer to the NAND device. */
-static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
-			int spare_only)
+static void send_page(struct mtd_info *mtd, unsigned int ops)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
-
-	/* NANDFC buffer 0 is used for page read/write */
-	writew(buf_id, host->regs + NFC_BUF_ADDR);
-
-	/* Configure spare or page+spare access */
-	if (!host->pagesize_2k) {
-		uint16_t config1 = readw(host->regs + NFC_CONFIG1);
-		if (spare_only)
-			config1 |= NFC_SP_EN;
-		else
-			config1 &= ~(NFC_SP_EN);
-		writew(config1, host->regs + NFC_CONFIG1);
-	}
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	int bufs, i;
 
-	writew(NFC_INPUT, host->regs + NFC_CONFIG2);
+	if (nfc_is_v1() && mtd->writesize > 512)
+		bufs = 4;
+	else
+		bufs = 1;
 
-	/* Wait for operation to complete */
-	wait_op_done(host, TROP_US_DELAY, spare_only, true);
-}
+	for (i = 0; i < bufs; i++) {
 
-/* Requests NANDFC to initated the transfer of data from the
- * NAND device into in the NANDFC ram buffer. */
-static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
-		int spare_only)
-{
-	DEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
+		/* NANDFC buffer 0 is used for page read/write */
+		writew(i, host->regs + NFC_BUF_ADDR);
 
-	/* NANDFC buffer 0 is used for page read/write */
-	writew(buf_id, host->regs + NFC_BUF_ADDR);
+		writew(ops, host->regs + NFC_CONFIG2);
 
-	/* Configure spare or page+spare access */
-	if (!host->pagesize_2k) {
-		uint32_t config1 = readw(host->regs + NFC_CONFIG1);
-		if (spare_only)
-			config1 |= NFC_SP_EN;
-		else
-			config1 &= ~NFC_SP_EN;
-		writew(config1, host->regs + NFC_CONFIG1);
+		/* Wait for operation to complete */
+		wait_op_done(host, true);
 	}
-
-	writew(NFC_OUTPUT, host->regs + NFC_CONFIG2);
-
-	/* Wait for operation to complete */
-	wait_op_done(host, TROP_US_DELAY, spare_only, true);
 }
 
 /* Request the NANDFC to perform a read of the NAND device ID. */
 static void send_read_id(struct mxc_nand_host *host)
 {
 	struct nand_chip *this = &host->nand;
-	uint16_t tmp;
 
 	/* NANDFC buffer 0 is used for device ID output */
 	writew(0x0, host->regs + NFC_BUF_ADDR);
 
-	/* Read ID into main buffer */
-	tmp = readw(host->regs + NFC_CONFIG1);
-	tmp &= ~NFC_SP_EN;
-	writew(tmp, host->regs + NFC_CONFIG1);
-
 	writew(NFC_ID, host->regs + NFC_CONFIG2);
 
 	/* Wait for operation to complete */
-	wait_op_done(host, TROP_US_DELAY, 0, true);
+	wait_op_done(host, true);
 
 	if (this->options & NAND_BUSWIDTH_16) {
-		void __iomem *main_buf = host->regs + MAIN_AREA0;
+		void __iomem *main_buf = host->main_area0;
 		/* compress the ID info */
 		writeb(readb(main_buf + 2), main_buf + 1);
 		writeb(readb(main_buf + 4), main_buf + 2);
@@ -312,15 +289,16 @@ static void send_read_id(struct mxc_nand_host *host)
 		writeb(readb(main_buf + 8), main_buf + 4);
 		writeb(readb(main_buf + 10), main_buf + 5);
 	}
+	memcpy(host->data_buf, host->main_area0, 16);
 }
 
 /* This function requests the NANDFC to perform a read of the
  * NAND device status and returns the current status. */
 static uint16_t get_dev_status(struct mxc_nand_host *host)
 {
-	void __iomem *main_buf = host->regs + MAIN_AREA1;
+	void __iomem *main_buf = host->main_area1;
 	uint32_t store;
-	uint16_t ret, tmp;
+	uint16_t ret;
 	/* Issue status request to NAND device */
 
 	/* store the main area1 first word, later do recovery */
@@ -329,15 +307,10 @@ static uint16_t get_dev_status(struct mxc_nand_host *host)
 	 * corruption of read/write buffer on status requests. */
 	writew(1, host->regs + NFC_BUF_ADDR);
 
-	/* Read status into main buffer */
-	tmp = readw(host->regs + NFC_CONFIG1);
-	tmp &= ~NFC_SP_EN;
-	writew(tmp, host->regs + NFC_CONFIG1);
-
 	writew(NFC_STATUS, host->regs + NFC_CONFIG2);
 
 	/* Wait for operation to complete */
-	wait_op_done(host, TROP_US_DELAY, 0, true);
+	wait_op_done(host, true);
 
 	/* Status is placed in first word of main buffer */
 	/* get status, then recovery area 1 data */
@@ -397,32 +370,14 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
-	uint8_t ret = 0;
-	uint16_t col, rd_word;
-	uint16_t __iomem *main_buf = host->regs + MAIN_AREA0;
-	uint16_t __iomem *spare_buf = host->regs + SPARE_AREA0;
+	uint8_t ret;
 
 	/* Check for status request */
 	if (host->status_request)
 		return get_dev_status(host) & 0xFF;
 
-	/* Get column for 16-bit access */
-	col = host->col_addr >> 1;
-
-	/* If we are accessing the spare region */
-	if (host->spare_only)
-		rd_word = readw(&spare_buf[col]);
-	else
-		rd_word = readw(&main_buf[col]);
-
-	/* Pick upper/lower byte of word from RAM buffer */
-	if (host->col_addr & 0x1)
-		ret = (rd_word >> 8) & 0xFF;
-	else
-		ret = rd_word & 0xFF;
-
-	/* Update saved column address */
-	host->col_addr++;
+	ret = *(uint8_t *)(host->data_buf + host->buf_start);
+	host->buf_start++;
 
 	return ret;
 }
@@ -431,33 +386,10 @@ static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
-	uint16_t col, rd_word, ret;
-	uint16_t __iomem *p;
-
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "mxc_nand_read_word(col = %d)\n", host->col_addr);
-
-	col = host->col_addr;
-	/* Adjust saved column address */
-	if (col < mtd->writesize && host->spare_only)
-		col += mtd->writesize;
+	uint16_t ret;
 
-	if (col < mtd->writesize)
-		p = (host->regs + MAIN_AREA0) + (col >> 1);
-	else
-		p = (host->regs + SPARE_AREA0) + ((col - mtd->writesize) >> 1);
-
-	if (col & 1) {
-		rd_word = readw(p);
-		ret = (rd_word >> 8) & 0xff;
-		rd_word = readw(&p[1]);
-		ret |= (rd_word << 8) & 0xff00;
-
-	} else
-		ret = readw(p);
-
-	/* Update saved column address */
-	host->col_addr = col + 2;
+	ret = *(uint16_t *)(host->data_buf + host->buf_start);
+	host->buf_start += 2;
 
 	return ret;
 }
@@ -470,94 +402,14 @@ static void mxc_nand_write_buf(struct mtd_info *mtd,
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
-	int n, col, i = 0;
-
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr,
-	      len);
-
-	col = host->col_addr;
+	u16 col = host->buf_start;
+	int n = mtd->oobsize + mtd->writesize - col;
 
-	/* Adjust saved column address */
-	if (col < mtd->writesize && host->spare_only)
-		col += mtd->writesize;
+	n = min(n, len);
 
-	n = mtd->writesize + mtd->oobsize - col;
-	n = min(len, n);
-
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n);
-
-	while (n) {
-		void __iomem *p;
-
-		if (col < mtd->writesize)
-			p = host->regs + MAIN_AREA0 + (col & ~3);
-		else
-			p = host->regs + SPARE_AREA0 -
-						mtd->writesize + (col & ~3);
-
-		DEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__,
-		      __LINE__, p);
-
-		if (((col | (int)&buf[i]) & 3) || n < 16) {
-			uint32_t data = 0;
-
-			if (col & 3 || n < 4)
-				data = readl(p);
-
-			switch (col & 3) {
-			case 0:
-				if (n) {
-					data = (data & 0xffffff00) |
-					    (buf[i++] << 0);
-					n--;
-					col++;
-				}
-			case 1:
-				if (n) {
-					data = (data & 0xffff00ff) |
-					    (buf[i++] << 8);
-					n--;
-					col++;
-				}
-			case 2:
-				if (n) {
-					data = (data & 0xff00ffff) |
-					    (buf[i++] << 16);
-					n--;
-					col++;
-				}
-			case 3:
-				if (n) {
-					data = (data & 0x00ffffff) |
-					    (buf[i++] << 24);
-					n--;
-					col++;
-				}
-			}
-
-			writel(data, p);
-		} else {
-			int m = mtd->writesize - col;
+	memcpy(host->data_buf + col, buf, n);
 
-			if (col >= mtd->writesize)
-				m += mtd->oobsize;
-
-			m = min(n, m) & ~3;
-
-			DEBUG(MTD_DEBUG_LEVEL3,
-			      "%s:%d: n = %d, m = %d, i = %d, col = %d\n",
-			      __func__,  __LINE__, n, m, i, col);
-
-			memcpy(p, &buf[i], m);
-			col += m;
-			i += m;
-			n -= m;
-		}
-	}
-	/* Update saved column address */
-	host->col_addr = col;
+	host->buf_start += n;
 }
 
 /* Read the data buffer from the NAND Flash. To read the data from NAND
@@ -568,75 +420,14 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
-	int n, col, i = 0;
-
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len);
-
-	col = host->col_addr;
+	u16 col = host->buf_start;
+	int n = mtd->oobsize + mtd->writesize - col;
 
-	/* Adjust saved column address */
-	if (col < mtd->writesize && host->spare_only)
-		col += mtd->writesize;
+	n = min(n, len);
 
-	n = mtd->writesize + mtd->oobsize - col;
-	n = min(len, n);
-
-	while (n) {
-		void __iomem *p;
-
-		if (col < mtd->writesize)
-			p = host->regs + MAIN_AREA0 + (col & ~3);
-		else
-			p = host->regs + SPARE_AREA0 -
-					mtd->writesize + (col & ~3);
-
-		if (((col | (int)&buf[i]) & 3) || n < 16) {
-			uint32_t data;
-
-			data = readl(p);
-			switch (col & 3) {
-			case 0:
-				if (n) {
-					buf[i++] = (uint8_t) (data);
-					n--;
-					col++;
-				}
-			case 1:
-				if (n) {
-					buf[i++] = (uint8_t) (data >> 8);
-					n--;
-					col++;
-				}
-			case 2:
-				if (n) {
-					buf[i++] = (uint8_t) (data >> 16);
-					n--;
-					col++;
-				}
-			case 3:
-				if (n) {
-					buf[i++] = (uint8_t) (data >> 24);
-					n--;
-					col++;
-				}
-			}
-		} else {
-			int m = mtd->writesize - col;
-
-			if (col >= mtd->writesize)
-				m += mtd->oobsize;
-
-			m = min(n, m) & ~3;
-			memcpy(&buf[i], p, m);
-			col += m;
-			i += m;
-			n -= m;
-		}
-	}
-	/* Update saved column address */
-	host->col_addr = col;
+	memcpy(buf, host->data_buf + col, len);
 
+	host->buf_start += len;
 }
 
 /* Used by the upper layer to verify the data in NAND Flash
@@ -654,23 +445,6 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
 
-#ifdef CONFIG_MTD_NAND_MXC_FORCE_CE
-	if (chip > 0) {
-		DEBUG(MTD_DEBUG_LEVEL0,
-		      "ERROR:  Illegal chip select (chip = %d)\n", chip);
-		return;
-	}
-
-	if (chip == -1) {
-		writew(readw(host->regs + NFC_CONFIG1) & ~NFC_CE,
-				host->regs + NFC_CONFIG1);
-		return;
-	}
-
-	writew(readw(host->regs + NFC_CONFIG1) | NFC_CE,
-			host->regs + NFC_CONFIG1);
-#endif
-
 	switch (chip) {
 	case -1:
 		/* Disable the NFC clock */
@@ -692,94 +466,40 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
 	}
 }
 
-/* Used by the upper layer to write command to NAND Flash for
- * different operations to be carried out on NAND Flash */
-static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
-				int column, int page_addr)
+/*
+ * Function to transfer data to/from spare area.
+ */
+static void copy_spare(struct mtd_info *mtd, bool bfrom)
 {
-	struct nand_chip *nand_chip = mtd->priv;
-	struct mxc_nand_host *host = nand_chip->priv;
-	int useirq = true;
-
-	DEBUG(MTD_DEBUG_LEVEL3,
-	      "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
-	      command, column, page_addr);
-
-	/* Reset command state information */
-	host->status_request = false;
-
-	/* Command pre-processing step */
-	switch (command) {
-
-	case NAND_CMD_STATUS:
-		host->col_addr = 0;
-		host->status_request = true;
-		break;
-
-	case NAND_CMD_READ0:
-		host->col_addr = column;
-		host->spare_only = false;
-		useirq = false;
-		break;
-
-	case NAND_CMD_READOOB:
-		host->col_addr = column;
-		host->spare_only = true;
-		useirq = false;
-		if (host->pagesize_2k)
-			command = NAND_CMD_READ0; /* only READ0 is valid */
-		break;
-
-	case NAND_CMD_SEQIN:
-		if (column >= mtd->writesize) {
-			/*
-			 * FIXME: before send SEQIN command for write OOB,
-			 * We must read one page out.
-			 * For K9F1GXX has no READ1 command to set current HW
-			 * pointer to spare area, we must write the whole page
-			 * including OOB together.
-			 */
-			if (host->pagesize_2k)
-				/* call ourself to read a page */
-				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
-						page_addr);
-
-			host->col_addr = column - mtd->writesize;
-			host->spare_only = true;
-
-			/* Set program pointer to spare region */
-			if (!host->pagesize_2k)
-				send_cmd(host, NAND_CMD_READOOB, false);
-		} else {
-			host->spare_only = false;
-			host->col_addr = column;
-
-			/* Set program pointer to page start */
-			if (!host->pagesize_2k)
-				send_cmd(host, NAND_CMD_READ0, false);
-		}
-		useirq = false;
-		break;
-
-	case NAND_CMD_PAGEPROG:
-		send_prog_page(host, 0, host->spare_only);
-
-		if (host->pagesize_2k) {
-			/* data in 4 areas datas */
-			send_prog_page(host, 1, host->spare_only);
-			send_prog_page(host, 2, host->spare_only);
-			send_prog_page(host, 3, host->spare_only);
-		}
-
-		break;
+	struct nand_chip *this = mtd->priv;
+	struct mxc_nand_host *host = this->priv;
+	u16 i, j;
+	u16 n = mtd->writesize >> 9;
+	u8 *d = host->data_buf + mtd->writesize;
+	u8 *s = host->spare0;
+	u16 t = host->spare_len;
+
+	j = (mtd->oobsize / n >> 1) << 1;
+
+	if (bfrom) {
+		for (i = 0; i < n - 1; i++)
+			memcpy(d + i * j, s + i * t, j);
+
+		/* the last section */
+		memcpy(d + i * j, s + i * t, mtd->oobsize - i * j);
+	} else {
+		for (i = 0; i < n - 1; i++)
+			memcpy(&s[i * t], &d[i * j], j);
 
-	case NAND_CMD_ERASE1:
-		useirq = false;
-		break;
+		/* the last section */
+		memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j);
 	}
+}
 
-	/* Write out the command to the device. */
-	send_cmd(host, command, useirq);
+static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
 
 	/* Write out column address, if necessary */
 	if (column != -1) {
@@ -791,7 +511,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		 * the full page.
 		 */
 		send_addr(host, 0, page_addr == -1);
-		if (host->pagesize_2k)
+		if (mtd->writesize > 512)
 			/* another col addr cycle for 2k page */
 			send_addr(host, 0, false);
 	}
@@ -801,7 +521,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		/* paddr_0 - p_addr_7 */
 		send_addr(host, (page_addr & 0xff), false);
 
-		if (host->pagesize_2k) {
+		if (mtd->writesize > 512) {
 			if (mtd->size >= 0x10000000) {
 				/* paddr_8 - paddr_15 */
 				send_addr(host, (page_addr >> 8) & 0xff, false);
@@ -820,52 +540,136 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 				send_addr(host, (page_addr >> 8) & 0xff, true);
 		}
 	}
+}
+
+/* Used by the upper layer to write command to NAND Flash for
+ * different operations to be carried out on NAND Flash */
+static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+				int column, int page_addr)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+
+	DEBUG(MTD_DEBUG_LEVEL3,
+	      "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+	      command, column, page_addr);
+
+	/* Reset command state information */
+	host->status_request = false;
 
-	/* Command post-processing step */
+	/* Command pre-processing step */
 	switch (command) {
 
-	case NAND_CMD_RESET:
+	case NAND_CMD_STATUS:
+		host->buf_start = 0;
+		host->status_request = true;
+
+		send_cmd(host, command, true);
+		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
-	case NAND_CMD_READOOB:
 	case NAND_CMD_READ0:
-		if (host->pagesize_2k) {
-			/* send read confirm command */
+	case NAND_CMD_READOOB:
+		if (command == NAND_CMD_READ0)
+			host->buf_start = column;
+		else
+			host->buf_start = column + mtd->writesize;
+
+		if (mtd->writesize > 512)
+			command = NAND_CMD_READ0; /* only READ0 is valid */
+
+		send_cmd(host, command, false);
+		mxc_do_addr_cycle(mtd, column, page_addr);
+
+		if (mtd->writesize > 512)
 			send_cmd(host, NAND_CMD_READSTART, true);
-			/* read for each AREA */
-			send_read_page(host, 0, host->spare_only);
-			send_read_page(host, 1, host->spare_only);
-			send_read_page(host, 2, host->spare_only);
-			send_read_page(host, 3, host->spare_only);
-		} else
-			send_read_page(host, 0, host->spare_only);
+
+		send_page(mtd, NFC_OUTPUT);
+
+		memcpy(host->data_buf, host->main_area0, mtd->writesize);
+		copy_spare(mtd, true);
 		break;
 
-	case NAND_CMD_READID:
-		host->col_addr = 0;
-		send_read_id(host);
+	case NAND_CMD_SEQIN:
+		if (column >= mtd->writesize) {
+			/*
+			 * FIXME: before send SEQIN command for write OOB,
+			 * We must read one page out.
+			 * For K9F1GXX has no READ1 command to set current HW
+			 * pointer to spare area, we must write the whole page
+			 * including OOB together.
+			 */
+			if (mtd->writesize > 512)
+				/* call ourself to read a page */
+				mxc_nand_command(mtd, NAND_CMD_READ0, 0,
+						page_addr);
+
+			host->buf_start = column;
+
+			/* Set program pointer to spare region */
+			if (mtd->writesize == 512)
+				send_cmd(host, NAND_CMD_READOOB, false);
+		} else {
+			host->buf_start = column;
+
+			/* Set program pointer to page start */
+			if (mtd->writesize == 512)
+				send_cmd(host, NAND_CMD_READ0, false);
+		}
+
+		send_cmd(host, command, false);
+		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_PAGEPROG:
+		memcpy(host->main_area0, host->data_buf, mtd->writesize);
+		copy_spare(mtd, false);
+		send_page(mtd, NFC_INPUT);
+		send_cmd(host, command, true);
+		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
-	case NAND_CMD_STATUS:
+	case NAND_CMD_READID:
+		send_cmd(host, command, true);
+		mxc_do_addr_cycle(mtd, column, page_addr);
+		send_read_id(host);
+		host->buf_start = column;
 		break;
 
+	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
+		send_cmd(host, command, false);
+		mxc_do_addr_cycle(mtd, column, page_addr);
+
 		break;
 	}
 }
 
-/* Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks. */
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+/*
+ * The generic flash bbt decriptors overlap with our ecc
+ * hardware, so define some i.MX specific ones.
+ */
+static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+	    | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs = 0,
+	.len = 4,
+	.veroffs = 4,
+	.maxblocks = 4,
+	.pattern = bbt_pattern,
+};
 
-static struct nand_bbt_descr smallpage_memorybased = {
-	.options = NAND_BBT_SCAN2NDPAGE,
-	.offs = 5,
-	.len = 1,
-	.pattern = scan_ff_pattern
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+	    | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs = 0,
+	.len = 4,
+	.veroffs = 4,
+	.maxblocks = 4,
+	.pattern = mirror_pattern,
 };
 
 static int __init mxcnd_probe(struct platform_device *pdev)
@@ -877,12 +681,16 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	struct resource *res;
 	uint16_t tmp;
 	int err = 0, nr_parts = 0;
+	struct nand_ecclayout *oob_smallpage, *oob_largepage;
 
 	/* Allocate memory for MTD device structure and private data */
-	host = kzalloc(sizeof(struct mxc_nand_host), GFP_KERNEL);
+	host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE +
+			NAND_MAX_OOBSIZE, GFP_KERNEL);
 	if (!host)
 		return -ENOMEM;
 
+	host->data_buf = (uint8_t *)(host + 1);
+
 	host->dev = &pdev->dev;
 	/* structures must be linked */
 	this = &host->nand;
@@ -890,7 +698,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	mtd->priv = this;
 	mtd->owner = THIS_MODULE;
 	mtd->dev.parent = &pdev->dev;
-	mtd->name = "mxc_nand";
+	mtd->name = DRIVER_NAME;
 
 	/* 50 us command delay time */
 	this->chip_delay = 5;
@@ -920,62 +728,93 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		goto eres;
 	}
 
-	host->regs = ioremap(res->start, res->end - res->start + 1);
-	if (!host->regs) {
+	host->base = ioremap(res->start, resource_size(res));
+	if (!host->base) {
 		err = -ENOMEM;
 		goto eres;
 	}
 
+	host->main_area0 = host->base;
+	host->main_area1 = host->base + 0x200;
+
+	if (nfc_is_v21()) {
+		host->regs = host->base + 0x1000;
+		host->spare0 = host->base + 0x1000;
+		host->spare_len = 64;
+		oob_smallpage = &nandv2_hw_eccoob_smallpage;
+		oob_largepage = &nandv2_hw_eccoob_largepage;
+	} else if (nfc_is_v1()) {
+		host->regs = host->base;
+		host->spare0 = host->base + 0x800;
+		host->spare_len = 16;
+		oob_smallpage = &nandv1_hw_eccoob_smallpage;
+		oob_largepage = &nandv1_hw_eccoob_largepage;
+	} else
+		BUG();
+
+	/* disable interrupt and spare enable */
 	tmp = readw(host->regs + NFC_CONFIG1);
 	tmp |= NFC_INT_MSK;
+	tmp &= ~NFC_SP_EN;
 	writew(tmp, host->regs + NFC_CONFIG1);
 
 	init_waitqueue_head(&host->irq_waitq);
 
 	host->irq = platform_get_irq(pdev, 0);
 
-	err = request_irq(host->irq, mxc_nfc_irq, 0, "mxc_nd", host);
+	err = request_irq(host->irq, mxc_nfc_irq, 0, DRIVER_NAME, host);
 	if (err)
 		goto eirq;
 
+	/* Reset NAND */
+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* preset operation */
+	/* Unlock the internal RAM Buffer */
+	writew(0x2, host->regs + NFC_CONFIG);
+
+	/* Blocks to be unlocked */
+	if (nfc_is_v21()) {
+		writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
+	        writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
+		this->ecc.bytes = 9;
+	} else if (nfc_is_v1()) {
+		writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
+	        writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
+		this->ecc.bytes = 3;
+	} else
+		BUG();
+
+	/* Unlock Block Command for given address range */
+	writew(0x4, host->regs + NFC_WRPROT);
+
+	this->ecc.size = 512;
+	this->ecc.layout = oob_smallpage;
+
 	if (pdata->hw_ecc) {
 		this->ecc.calculate = mxc_nand_calculate_ecc;
 		this->ecc.hwctl = mxc_nand_enable_hwecc;
 		this->ecc.correct = mxc_nand_correct_data;
 		this->ecc.mode = NAND_ECC_HW;
-		this->ecc.size = 512;
-		this->ecc.bytes = 3;
 		tmp = readw(host->regs + NFC_CONFIG1);
 		tmp |= NFC_ECC_EN;
 		writew(tmp, host->regs + NFC_CONFIG1);
 	} else {
-		this->ecc.size = 512;
-		this->ecc.bytes = 3;
-		this->ecc.layout = &nand_hw_eccoob_8;
 		this->ecc.mode = NAND_ECC_SOFT;
 		tmp = readw(host->regs + NFC_CONFIG1);
 		tmp &= ~NFC_ECC_EN;
 		writew(tmp, host->regs + NFC_CONFIG1);
 	}
 
-	/* Reset NAND */
-	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-
-	/* preset operation */
-	/* Unlock the internal RAM Buffer */
-	writew(0x2, host->regs + NFC_CONFIG);
-
-	/* Blocks to be unlocked */
-	writew(0x0, host->regs + NFC_UNLOCKSTART_BLKADDR);
-	writew(0x4000, host->regs + NFC_UNLOCKEND_BLKADDR);
-
-	/* Unlock Block Command for given address range */
-	writew(0x4, host->regs + NFC_WRPROT);
-
 	/* NAND bus width determines access funtions used by upper layer */
-	if (pdata->width == 2) {
+	if (pdata->width == 2)
 		this->options |= NAND_BUSWIDTH_16;
-		this->ecc.layout = &nand_hw_eccoob_16;
+
+	if (pdata->flash_bbt) {
+		this->bbt_td = &bbt_main_descr;
+		this->bbt_md = &bbt_mirror_descr;
+		/* update flash based bbt */
+		this->options |= NAND_USE_FLASH_BBT;
 	}
 
 	/* first scan to find the device and get the page size */
@@ -984,38 +823,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		goto escan;
 	}
 
-	if (mtd->writesize == 2048) {
-		host->pagesize_2k = 1;
-		this->badblock_pattern = &smallpage_memorybased;
-	}
-
-	if (this->ecc.mode == NAND_ECC_HW) {
-		switch (mtd->oobsize) {
-		case 8:
-			this->ecc.layout = &nand_hw_eccoob_8;
-			break;
-		case 16:
-			this->ecc.layout = &nand_hw_eccoob_16;
-			break;
-		case 64:
-			this->ecc.layout = &nand_hw_eccoob_64;
-			break;
-		default:
-			/* page size not handled by HW ECC */
-			/* switching back to soft ECC */
-			this->ecc.size = 512;
-			this->ecc.bytes = 3;
-			this->ecc.layout = &nand_hw_eccoob_8;
-			this->ecc.mode = NAND_ECC_SOFT;
-			this->ecc.calculate = NULL;
-			this->ecc.correct = NULL;
-			this->ecc.hwctl = NULL;
-			tmp = readw(host->regs + NFC_CONFIG1);
-			tmp &= ~NFC_ECC_EN;
-			writew(tmp, host->regs + NFC_CONFIG1);
-			break;
-		}
-	}
+	if (mtd->writesize == 2048)
+		this->ecc.layout = oob_largepage;
 
 	/* second phase scan */
 	if (nand_scan_tail(mtd)) {
@@ -1043,7 +852,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 escan:
 	free_irq(host->irq, host);
 eirq:
-	iounmap(host->regs);
+	iounmap(host->base);
 eres:
 	clk_put(host->clk);
 eclk:
@@ -1062,7 +871,7 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
 
 	nand_release(&host->mtd);
 	free_irq(host->irq, host);
-	iounmap(host->regs);
+	iounmap(host->base);
 	kfree(host);
 
 	return 0;
@@ -1113,7 +922,7 @@ static struct platform_driver mxcnd_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
 		   },
-	.remove = __exit_p(mxcnd_remove),
+	.remove = __devexit_p(mxcnd_remove),
 	.suspend = mxcnd_suspend,
 	.resume = mxcnd_resume,
 };
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 2957cc70da3..8f2958fe214 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -428,6 +428,28 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
 	return nand_isbad_bbt(mtd, ofs, allowbbt);
 }
 
+/**
+ * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @mtd:	MTD device structure
+ * @timeo:	Timeout
+ *
+ * Helper function for nand_wait_ready used when needing to wait in interrupt
+ * context.
+ */
+static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+	struct nand_chip *chip = mtd->priv;
+	int i;
+
+	/* Wait for the device to get ready */
+	for (i = 0; i < timeo; i++) {
+		if (chip->dev_ready(mtd))
+			break;
+		touch_softlockup_watchdog();
+		mdelay(1);
+	}
+}
+
 /*
  * Wait for the ready pin, after a command
  * The timeout is catched later.
@@ -437,6 +459,10 @@ void nand_wait_ready(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	unsigned long timeo = jiffies + 2;
 
+	/* 400ms timeout */
+	if (in_interrupt() || oops_in_progress)
+		return panic_nand_wait_ready(mtd, 400);
+
 	led_trigger_event(nand_led_trigger, LED_FULL);
 	/* wait until command is processed or timeout occures */
 	do {
@@ -672,6 +698,22 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 }
 
 /**
+ * panic_nand_get_device - [GENERIC] Get chip for selected access
+ * @chip:	the nand chip descriptor
+ * @mtd:	MTD device structure
+ * @new_state:	the state which is requested
+ *
+ * Used when in panic, no locks are taken.
+ */
+static void panic_nand_get_device(struct nand_chip *chip,
+		      struct mtd_info *mtd, int new_state)
+{
+	/* Hardware controller shared among independend devices */
+	chip->controller->active = chip;
+	chip->state = new_state;
+}
+
+/**
  * nand_get_device - [GENERIC] Get chip for selected access
  * @chip:	the nand chip descriptor
  * @mtd:	MTD device structure
@@ -698,8 +740,14 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
 		return 0;
 	}
 	if (new_state == FL_PM_SUSPENDED) {
-		spin_unlock(lock);
-		return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
+		if (chip->controller->active->state == FL_PM_SUSPENDED) {
+			chip->state = FL_PM_SUSPENDED;
+			spin_unlock(lock);
+			return 0;
+		} else {
+			spin_unlock(lock);
+			return -EAGAIN;
+		}
 	}
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(wq, &wait);
@@ -710,6 +758,32 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
 }
 
 /**
+ * panic_nand_wait - [GENERIC]  wait until the command is done
+ * @mtd:	MTD device structure
+ * @chip:	NAND chip structure
+ * @timeo:	Timeout
+ *
+ * Wait for command done. This is a helper function for nand_wait used when
+ * we are in interrupt context. May happen when in panic and trying to write
+ * an oops trough mtdoops.
+ */
+static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
+			    unsigned long timeo)
+{
+	int i;
+	for (i = 0; i < timeo; i++) {
+		if (chip->dev_ready) {
+			if (chip->dev_ready(mtd))
+				break;
+		} else {
+			if (chip->read_byte(mtd) & NAND_STATUS_READY)
+				break;
+		}
+		mdelay(1);
+        }
+}
+
+/**
  * nand_wait - [DEFAULT]  wait until the command is done
  * @mtd:	MTD device structure
  * @chip:	NAND chip structure
@@ -740,15 +814,19 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	else
 		chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 
-	while (time_before(jiffies, timeo)) {
-		if (chip->dev_ready) {
-			if (chip->dev_ready(mtd))
-				break;
-		} else {
-			if (chip->read_byte(mtd) & NAND_STATUS_READY)
-				break;
+	if (in_interrupt() || oops_in_progress)
+		panic_nand_wait(mtd, chip, timeo);
+	else {
+		while (time_before(jiffies, timeo)) {
+			if (chip->dev_ready) {
+				if (chip->dev_ready(mtd))
+					break;
+			} else {
+				if (chip->read_byte(mtd) & NAND_STATUS_READY)
+					break;
+			}
+			cond_resched();
 		}
-		cond_resched();
 	}
 	led_trigger_event(nand_led_trigger, LED_OFF);
 
@@ -1949,6 +2027,45 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 }
 
 /**
+ * panic_nand_write - [MTD Interface] NAND write with ECC
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @len:	number of bytes to write
+ * @retlen:	pointer to variable to store the number of written bytes
+ * @buf:	the data to write
+ *
+ * NAND write with ECC. Used when performing writes in interrupt context, this
+ * may for example be called by mtdoops when writing an oops while in panic.
+ */
+static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+			    size_t *retlen, const uint8_t *buf)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	/* Do not allow reads past end of device */
+	if ((to + len) > mtd->size)
+		return -EINVAL;
+	if (!len)
+		return 0;
+
+	/* Wait for the device to get ready.  */
+	panic_nand_wait(mtd, chip, 400);
+
+	/* Grab the device.  */
+	panic_nand_get_device(chip, mtd, FL_WRITING);
+
+	chip->ops.len = len;
+	chip->ops.datbuf = (uint8_t *)buf;
+	chip->ops.oobbuf = NULL;
+
+	ret = nand_do_write_ops(mtd, to, &chip->ops);
+
+	*retlen = chip->ops.retlen;
+	return ret;
+}
+
+/**
  * nand_write - [MTD Interface] NAND write with ECC
  * @mtd:	MTD device structure
  * @to:		offset to write to
@@ -2645,7 +2762,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
 	type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id);
 
 	if (IS_ERR(type)) {
-		printk(KERN_WARNING "No NAND device found!!!\n");
+		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
+			printk(KERN_WARNING "No NAND device found.\n");
 		chip->select_chip(mtd, -1);
 		return PTR_ERR(type);
 	}
@@ -2877,6 +2995,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->unpoint = NULL;
 	mtd->read = nand_read;
 	mtd->write = nand_write;
+	mtd->panic_write = panic_nand_write;
 	mtd->read_oob = nand_read_oob;
 	mtd->write_oob = nand_write_oob;
 	mtd->sync = nand_sync;
diff --git a/drivers/mtd/nand/nand_bcm_umi.c b/drivers/mtd/nand/nand_bcm_umi.c
new file mode 100644
index 00000000000..46a6bc9c4b7
--- /dev/null
+++ b/drivers/mtd/nand/nand_bcm_umi.c
@@ -0,0 +1,149 @@
+/*****************************************************************************
+* Copyright 2004 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/reg_umi.h>
+#include "nand_bcm_umi.h"
+#ifdef BOOT0_BUILD
+#include <uart.h>
+#endif
+
+/* ---- External Variable Declarations ----------------------------------- */
+/* ---- External Function Prototypes ------------------------------------- */
+/* ---- Public Variables ------------------------------------------------- */
+/* ---- Private Constants and Types -------------------------------------- */
+/* ---- Private Function Prototypes -------------------------------------- */
+/* ---- Private Variables ------------------------------------------------ */
+/* ---- Private Functions ------------------------------------------------ */
+
+#if NAND_ECC_BCH
+/****************************************************************************
+*  nand_bch_ecc_flip_bit - Routine to flip an errored bit
+*
+*  PURPOSE:
+*     This is a helper routine that flips the bit (0 -> 1 or 1 -> 0) of the
+*     errored bit specified
+*
+*  PARAMETERS:
+*     datap - Container that holds the 512 byte data
+*     errorLocation - Location of the bit that needs to be flipped
+*
+*  RETURNS:
+*     None
+****************************************************************************/
+static void nand_bcm_umi_bch_ecc_flip_bit(uint8_t *datap, int errorLocation)
+{
+	int locWithinAByte = (errorLocation & REG_UMI_BCH_ERR_LOC_BYTE) >> 0;
+	int locWithinAWord = (errorLocation & REG_UMI_BCH_ERR_LOC_WORD) >> 3;
+	int locWithinAPage = (errorLocation & REG_UMI_BCH_ERR_LOC_PAGE) >> 5;
+
+	uint8_t errorByte = 0;
+	uint8_t byteMask = 1 << locWithinAByte;
+
+	/* BCH uses big endian, need to change the location
+	 * bits to little endian */
+	locWithinAWord = 3 - locWithinAWord;
+
+	errorByte = datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord];
+
+#ifdef BOOT0_BUILD
+	puthexs("\nECC Correct Offset: ",
+		locWithinAPage * sizeof(uint32_t) + locWithinAWord);
+	puthexs(" errorByte:", errorByte);
+	puthex8(" Bit: ", locWithinAByte);
+#endif
+
+	if (errorByte & byteMask) {
+		/* bit needs to be cleared */
+		errorByte &= ~byteMask;
+	} else {
+		/* bit needs to be set */
+		errorByte |= byteMask;
+	}
+
+	/* write back the value with the fixed bit */
+	datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord] = errorByte;
+}
+
+/****************************************************************************
+*  nand_correct_page_bch - Routine to correct bit errors when reading NAND
+*
+*  PURPOSE:
+*     This routine reads the BCH registers to determine if there are any bit
+*     errors during the read of the last 512 bytes of data + ECC bytes.  If
+*     errors exists, the routine fixes it.
+*
+*  PARAMETERS:
+*     datap - Container that holds the 512 byte data
+*
+*  RETURNS:
+*     0 or greater = Number of errors corrected
+*                    (No errors are found or errors have been fixed)
+*    -1 = Error(s) cannot be fixed
+****************************************************************************/
+int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData,
+				  int numEccBytes)
+{
+	int numErrors;
+	int errorLocation;
+	int idx;
+	uint32_t regValue;
+
+	/* wait for read ECC to be valid */
+	regValue = nand_bcm_umi_bch_poll_read_ecc_calc();
+
+	/*
+	 * read the control status register to determine if there
+	 * are error'ed bits
+	 * see if errors are correctible
+	 */
+	if ((regValue & REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR) > 0) {
+		int i;
+
+		for (i = 0; i < numEccBytes; i++) {
+			if (readEccData[i] != 0xff) {
+				/* errors cannot be fixed, return -1 */
+				return -1;
+			}
+		}
+		/* If ECC is unprogrammed then we can't correct,
+		 * assume everything OK */
+		return 0;
+	}
+
+	if ((regValue & REG_UMI_BCH_CTRL_STATUS_CORR_ERR) == 0) {
+		/* no errors */
+		return 0;
+	}
+
+	/*
+	 * Fix errored bits by doing the following:
+	 * 1. Read the number of errors in the control and status register
+	 * 2. Read the error location registers that corresponds to the number
+	 *    of errors reported
+	 * 3. Invert the bit in the data
+	 */
+	numErrors = (regValue & REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR) >> 20;
+
+	for (idx = 0; idx < numErrors; idx++) {
+		errorLocation =
+		    REG_UMI_BCH_ERR_LOC_ADDR(idx) & REG_UMI_BCH_ERR_LOC_MASK;
+
+		/* Flip bit */
+		nand_bcm_umi_bch_ecc_flip_bit(datap, errorLocation);
+	}
+	/* Errors corrected */
+	return numErrors;
+}
+#endif
diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h
new file mode 100644
index 00000000000..7cec2cd9785
--- /dev/null
+++ b/drivers/mtd/nand/nand_bcm_umi.h
@@ -0,0 +1,358 @@
+/*****************************************************************************
+* Copyright 2003 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#ifndef NAND_BCM_UMI_H
+#define NAND_BCM_UMI_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/reg_umi.h>
+#include <mach/reg_nand.h>
+#include <cfg_global.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+#if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING)
+#define NAND_ECC_BCH (CFG_GLOBAL_CHIP_REV > 0xA0)
+#else
+#define NAND_ECC_BCH 0
+#endif
+
+#define CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES	13
+
+#if NAND_ECC_BCH
+#ifdef BOOT0_BUILD
+#define NAND_ECC_NUM_BYTES 13
+#else
+#define NAND_ECC_NUM_BYTES CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES
+#endif
+#else
+#define NAND_ECC_NUM_BYTES 3
+#endif
+
+#define NAND_DATA_ACCESS_SIZE 512
+
+/* ---- Variable Externs ------------------------------------------ */
+/* ---- Function Prototypes --------------------------------------- */
+int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData,
+				  int numEccBytes);
+
+/* Check in device is ready */
+static inline int nand_bcm_umi_dev_ready(void)
+{
+	return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY;
+}
+
+/* Wait until device is ready */
+static inline void nand_bcm_umi_wait_till_ready(void)
+{
+	while (nand_bcm_umi_dev_ready() == 0)
+		;
+}
+
+/* Enable Hamming ECC */
+static inline void nand_bcm_umi_hamming_enable_hwecc(void)
+{
+	/* disable and reset ECC, 512 byte page */
+	REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
+		REG_UMI_NAND_ECC_CSR_256BYTE);
+	/* enable ECC */
+	REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE;
+}
+
+#if NAND_ECC_BCH
+/* BCH ECC specifics */
+#define ECC_BITS_PER_CORRECTABLE_BIT 13
+
+/* Enable BCH Read ECC */
+static inline void nand_bcm_umi_bch_enable_read_hwecc(void)
+{
+	/* disable and reset ECC */
+	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
+	/* Turn on ECC */
+	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
+}
+
+/* Enable BCH Write ECC */
+static inline void nand_bcm_umi_bch_enable_write_hwecc(void)
+{
+	/* disable and reset ECC */
+	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID;
+	/* Turn on ECC */
+	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN;
+}
+
+/* Config number of BCH ECC bytes */
+static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes)
+{
+	uint32_t nValue;
+	uint32_t tValue;
+	uint32_t kValue;
+	uint32_t numBits = numEccBytes * 8;
+
+	/* disable and reset ECC */
+	REG_UMI_BCH_CTRL_STATUS =
+	    REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
+	    REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
+
+	/* Every correctible bit requires 13 ECC bits */
+	tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT);
+
+	/* Total data in number of bits for generating and computing BCH ECC */
+	nValue = (NAND_DATA_ACCESS_SIZE + numEccBytes) * 8;
+
+	/* K parameter is used internally.  K = N - (T * 13) */
+	kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT);
+
+	/* Write the settings */
+	REG_UMI_BCH_N = nValue;
+	REG_UMI_BCH_T = tValue;
+	REG_UMI_BCH_K = kValue;
+}
+
+/* Pause during ECC read calculation to skip bytes in OOB */
+static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void)
+{
+	REG_UMI_BCH_CTRL_STATUS =
+	    REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN |
+	    REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC;
+}
+
+/* Resume during ECC read calculation after skipping bytes in OOB */
+static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void)
+{
+	REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
+}
+
+/* Poll read ECC calc to check when hardware completes */
+static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void)
+{
+	uint32_t regVal;
+
+	do {
+		/* wait for ECC to be valid */
+		regVal = REG_UMI_BCH_CTRL_STATUS;
+	} while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0);
+
+	return regVal;
+}
+
+/* Poll write ECC calc to check when hardware completes */
+static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void)
+{
+	/* wait for ECC to be valid */
+	while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
+	       == 0)
+		;
+}
+
+/* Read the OOB and ECC, for kernel write OOB to a buffer */
+#if defined(__KERNEL__) && !defined(STANDALONE)
+static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
+	uint8_t *eccCalc, int numEccBytes, uint8_t *oobp)
+#else
+static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
+	uint8_t *eccCalc, int numEccBytes)
+#endif
+{
+	int eccPos = 0;
+	int numToRead = 16;	/* There are 16 bytes per sector in the OOB */
+
+	/* ECC is already paused when this function is called */
+
+	if (pageSize == NAND_DATA_ACCESS_SIZE) {
+		while (numToRead > numEccBytes) {
+			/* skip free oob region */
+#if defined(__KERNEL__) && !defined(STANDALONE)
+			*oobp++ = REG_NAND_DATA8;
+#else
+			REG_NAND_DATA8;
+#endif
+			numToRead--;
+		}
+
+		/* read ECC bytes before BI */
+		nand_bcm_umi_bch_resume_read_ecc_calc();
+
+		while (numToRead > 11) {
+#if defined(__KERNEL__) && !defined(STANDALONE)
+			*oobp = REG_NAND_DATA8;
+			eccCalc[eccPos++] = *oobp;
+			oobp++;
+#else
+			eccCalc[eccPos++] = REG_NAND_DATA8;
+#endif
+		}
+
+		nand_bcm_umi_bch_pause_read_ecc_calc();
+
+		if (numToRead == 11) {
+			/* read BI */
+#if defined(__KERNEL__) && !defined(STANDALONE)
+			*oobp++ = REG_NAND_DATA8;
+#else
+			REG_NAND_DATA8;
+#endif
+			numToRead--;
+		}
+
+		/* read ECC bytes */
+		nand_bcm_umi_bch_resume_read_ecc_calc();
+		while (numToRead) {
+#if defined(__KERNEL__) && !defined(STANDALONE)
+			*oobp = REG_NAND_DATA8;
+			eccCalc[eccPos++] = *oobp;
+			oobp++;
+#else
+			eccCalc[eccPos++] = REG_NAND_DATA8;
+#endif
+			numToRead--;
+		}
+	} else {
+		/* skip BI */
+#if defined(__KERNEL__) && !defined(STANDALONE)
+		*oobp++ = REG_NAND_DATA8;
+#else
+		REG_NAND_DATA8;
+#endif
+		numToRead--;
+
+		while (numToRead > numEccBytes) {
+			/* skip free oob region */
+#if defined(__KERNEL__) && !defined(STANDALONE)
+			*oobp++ = REG_NAND_DATA8;
+#else
+			REG_NAND_DATA8;
+#endif
+			numToRead--;
+		}
+
+		/* read ECC bytes */
+		nand_bcm_umi_bch_resume_read_ecc_calc();
+		while (numToRead) {
+#if defined(__KERNEL__) && !defined(STANDALONE)
+			*oobp = REG_NAND_DATA8;
+			eccCalc[eccPos++] = *oobp;
+			oobp++;
+#else
+			eccCalc[eccPos++] = REG_NAND_DATA8;
+#endif
+			numToRead--;
+		}
+	}
+}
+
+/* Helper function to write ECC */
+static inline void NAND_BCM_UMI_ECC_WRITE(int numEccBytes, int eccBytePos,
+					  uint8_t *oobp, uint8_t eccVal)
+{
+	if (eccBytePos <= numEccBytes)
+		*oobp = eccVal;
+}
+
+/* Write OOB with ECC */
+static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
+						 uint8_t *oobp, int numEccBytes)
+{
+	uint32_t eccVal = 0xffffffff;
+
+	/* wait for write ECC to be valid */
+	nand_bcm_umi_bch_poll_write_ecc_calc();
+
+	/*
+	 ** Get the hardware ecc from the 32-bit result registers.
+	 ** Read after 512 byte accesses. Format B3B2B1B0
+	 ** where B3 = ecc3, etc.
+	 */
+
+	if (pageSize == NAND_DATA_ACCESS_SIZE) {
+		/* Now fill in the ECC bytes */
+		if (numEccBytes >= 13)
+			eccVal = REG_UMI_BCH_WR_ECC_3;
+
+		/* Usually we skip CM in oob[0,1] */
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0],
+			(eccVal >> 16) & 0xff);
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[1],
+			(eccVal >> 8) & 0xff);
+
+		/* Write ECC in oob[2,3,4] */
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[2],
+			eccVal & 0xff);	/* ECC 12 */
+
+		if (numEccBytes >= 9)
+			eccVal = REG_UMI_BCH_WR_ECC_2;
+
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3],
+			(eccVal >> 24) & 0xff);	/* ECC11 */
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[4],
+			(eccVal >> 16) & 0xff);	/* ECC10 */
+
+		/* Always Skip BI in oob[5] */
+	} else {
+		/* Always Skip BI in oob[0] */
+
+		/* Now fill in the ECC bytes */
+		if (numEccBytes >= 13)
+			eccVal = REG_UMI_BCH_WR_ECC_3;
+
+		/* Usually skip CM in oob[1,2] */
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1],
+			(eccVal >> 16) & 0xff);
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[2],
+			(eccVal >> 8) & 0xff);
+
+		/* Write ECC in oob[3-15] */
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[3],
+			eccVal & 0xff);	/* ECC12 */
+
+		if (numEccBytes >= 9)
+			eccVal = REG_UMI_BCH_WR_ECC_2;
+
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4],
+			(eccVal >> 24) & 0xff);	/* ECC11 */
+		NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[5],
+			(eccVal >> 16) & 0xff);	/* ECC10 */
+	}
+
+	/* Fill in the remainder of ECC locations */
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 10, &oobp[6],
+		(eccVal >> 8) & 0xff);	/* ECC9 */
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 9, &oobp[7],
+		eccVal & 0xff);	/* ECC8 */
+
+	if (numEccBytes >= 5)
+		eccVal = REG_UMI_BCH_WR_ECC_1;
+
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8],
+		(eccVal >> 24) & 0xff);	/* ECC7 */
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 7, &oobp[9],
+		(eccVal >> 16) & 0xff);	/* ECC6 */
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 6, &oobp[10],
+		(eccVal >> 8) & 0xff);	/* ECC5 */
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 5, &oobp[11],
+		eccVal & 0xff);	/* ECC4 */
+
+	if (numEccBytes >= 1)
+		eccVal = REG_UMI_BCH_WR_ECC_0;
+
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12],
+		(eccVal >> 24) & 0xff);	/* ECC3 */
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 3, &oobp[13],
+		(eccVal >> 16) & 0xff);	/* ECC2 */
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 2, &oobp[14],
+		(eccVal >> 8) & 0xff);	/* ECC1 */
+	NAND_BCM_UMI_ECC_WRITE(numEccBytes, 1, &oobp[15],
+		eccVal & 0xff);	/* ECC0 */
+}
+#endif
+
+#endif /* NAND_BCM_UMI_H */
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 92320a64327..271b8e735e8 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -150,20 +150,19 @@ static const char addressbits[256] = {
 };
 
 /**
- * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
+ * __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
  *			 block
- * @mtd:	MTD block structure
  * @buf:	input buffer with raw data
+ * @eccsize:	data bytes per ecc step (256 or 512)
  * @code:	output buffer with ECC
  */
-int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
 		       unsigned char *code)
 {
 	int i;
 	const uint32_t *bp = (uint32_t *)buf;
 	/* 256 or 512 bytes/ecc  */
-	const uint32_t eccsize_mult =
-			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
+	const uint32_t eccsize_mult = eccsize >> 8;
 	uint32_t cur;		/* current value in buffer */
 	/* rp0..rp15..rp17 are the various accumulated parities (per byte) */
 	uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
@@ -412,6 +411,22 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
 		    (invparity[par & 0x55] << 2) |
 		    (invparity[rp17] << 1) |
 		    (invparity[rp16] << 0);
+}
+EXPORT_SYMBOL(__nand_calculate_ecc);
+
+/**
+ * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
+ *			 block
+ * @mtd:	MTD block structure
+ * @buf:	input buffer with raw data
+ * @code:	output buffer with ECC
+ */
+int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+		       unsigned char *code)
+{
+	__nand_calculate_ecc(buf,
+			((struct nand_chip *)mtd->priv)->ecc.size, code);
+
 	return 0;
 }
 EXPORT_SYMBOL(nand_calculate_ecc);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index cd0711b83ac..7281000fef2 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -161,7 +161,7 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of memory");
 
 /* The largest possible page size */
-#define NS_LARGEST_PAGE_SIZE	2048
+#define NS_LARGEST_PAGE_SIZE	4096
 
 /* The prefix for simulator output */
 #define NS_OUTPUT_PREFIX "[nandsim]"
@@ -259,7 +259,8 @@ MODULE_PARM_DESC(cache_file,     "File to use to cache nand pages instead of mem
 #define OPT_SMARTMEDIA   0x00000010 /* SmartMedia technology chips */
 #define OPT_AUTOINCR     0x00000020 /* page number auto inctimentation is possible */
 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
-#define OPT_LARGEPAGE    (OPT_PAGE2048) /* 2048-byte page chips */
+#define OPT_PAGE4096     0x00000080 /* 4096-byte page chips */
+#define OPT_LARGEPAGE    (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
 #define OPT_SMALLPAGE    (OPT_PAGE256  | OPT_PAGE512)  /* 256 and 512-byte page chips */
 
 /* Remove action bits ftom state */
@@ -588,6 +589,8 @@ static int init_nandsim(struct mtd_info *mtd)
 			ns->options |= OPT_PAGE512_8BIT;
 	} else if (ns->geom.pgsz == 2048) {
 		ns->options |= OPT_PAGE2048;
+	} else if (ns->geom.pgsz == 4096) {
+		ns->options |= OPT_PAGE4096;
 	} else {
 		NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz);
 		return -EIO;
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 4e16c6f5bdd..8d467315f02 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -34,7 +34,12 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 {
 	struct platform_nand_data *pdata = pdev->dev.platform_data;
 	struct plat_nand_data *data;
-	int res = 0;
+	struct resource *res;
+	int err = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
 
 	/* Allocate memory for the device structure (and zero it) */
 	data = kzalloc(sizeof(struct plat_nand_data), GFP_KERNEL);
@@ -43,12 +48,18 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	data->io_base = ioremap(pdev->resource[0].start,
-				pdev->resource[0].end - pdev->resource[0].start + 1);
+	if (!request_mem_region(res->start, resource_size(res),
+				dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		err = -EBUSY;
+		goto out_free;
+	}
+
+	data->io_base = ioremap(res->start, resource_size(res));
 	if (data->io_base == NULL) {
 		dev_err(&pdev->dev, "ioremap failed\n");
-		kfree(data);
-		return -EIO;
+		err = -EIO;
+		goto out_release_io;
 	}
 
 	data->chip.priv = &data;
@@ -74,24 +85,24 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 
 	/* Handle any platform specific setup */
 	if (pdata->ctrl.probe) {
-		res = pdata->ctrl.probe(pdev);
-		if (res)
+		err = pdata->ctrl.probe(pdev);
+		if (err)
 			goto out;
 	}
 
 	/* Scan to find existance of the device */
 	if (nand_scan(&data->mtd, 1)) {
-		res = -ENXIO;
+		err = -ENXIO;
 		goto out;
 	}
 
 #ifdef CONFIG_MTD_PARTITIONS
 	if (pdata->chip.part_probe_types) {
-		res = parse_mtd_partitions(&data->mtd,
+		err = parse_mtd_partitions(&data->mtd,
 					pdata->chip.part_probe_types,
 					&data->parts, 0);
-		if (res > 0) {
-			add_mtd_partitions(&data->mtd, data->parts, res);
+		if (err > 0) {
+			add_mtd_partitions(&data->mtd, data->parts, err);
 			return 0;
 		}
 	}
@@ -99,14 +110,14 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 		pdata->chip.set_parts(data->mtd.size, &pdata->chip);
 	if (pdata->chip.partitions) {
 		data->parts = pdata->chip.partitions;
-		res = add_mtd_partitions(&data->mtd, data->parts,
+		err = add_mtd_partitions(&data->mtd, data->parts,
 			pdata->chip.nr_partitions);
 	} else
 #endif
-	res = add_mtd_device(&data->mtd);
+	err = add_mtd_device(&data->mtd);
 
-	if (!res)
-		return res;
+	if (!err)
+		return err;
 
 	nand_release(&data->mtd);
 out:
@@ -114,8 +125,11 @@ out:
 		pdata->ctrl.remove(pdev);
 	platform_set_drvdata(pdev, NULL);
 	iounmap(data->io_base);
+out_release_io:
+	release_mem_region(res->start, resource_size(res));
+out_free:
 	kfree(data);
-	return res;
+	return err;
 }
 
 /*
@@ -125,6 +139,9 @@ static int __devexit plat_nand_remove(struct platform_device *pdev)
 {
 	struct plat_nand_data *data = platform_get_drvdata(pdev);
 	struct platform_nand_data *pdata = pdev->dev.platform_data;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	nand_release(&data->mtd);
 #ifdef CONFIG_MTD_PARTITIONS
@@ -134,6 +151,7 @@ static int __devexit plat_nand_remove(struct platform_device *pdev)
 	if (pdata->ctrl.remove)
 		pdata->ctrl.remove(pdev);
 	iounmap(data->io_base);
+	release_mem_region(res->start, resource_size(res));
 	kfree(data);
 
 	return 0;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 68b5b3a486a..fa6e9c7fe51 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -774,7 +774,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	chip->select_chip  = s3c2410_nand_select_chip;
 	chip->chip_delay   = 50;
 	chip->priv	   = nmtd;
-	chip->options	   = 0;
+	chip->options	   = set->options;
 	chip->controller   = &info->controller;
 
 	switch (info->cpu_type) {
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 73af8324d0d..863513c3b69 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -429,11 +429,10 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev)
 		chip = mtd->priv;
 		txx9_priv = chip->priv;
 
+		nand_release(mtd);
 #ifdef CONFIG_MTD_PARTITIONS
-		del_mtd_partitions(mtd);
 		kfree(drvdata->parts[i]);
 #endif
-		del_mtd_device(mtd);
 		kfree(txx9_priv->mtdname);
 		kfree(txx9_priv);
 	}
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 86c4f6dcdc6..75f38b95811 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -112,10 +112,24 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 	unsigned long timeout;
 	u32 syscfg;
 
-	if (state == FL_RESETING) {
-		int i;
+	if (state == FL_RESETING || state == FL_PREPARING_ERASE ||
+	    state == FL_VERIFYING_ERASE) {
+		int i = 21;
+		unsigned int intr_flags = ONENAND_INT_MASTER;
+
+		switch (state) {
+		case FL_RESETING:
+			intr_flags |= ONENAND_INT_RESET;
+			break;
+		case FL_PREPARING_ERASE:
+			intr_flags |= ONENAND_INT_ERASE;
+			break;
+		case FL_VERIFYING_ERASE:
+			i = 101;
+			break;
+		}
 
-		for (i = 0; i < 20; i++) {
+		while (--i) {
 			udelay(1);
 			intr = read_reg(c, ONENAND_REG_INTERRUPT);
 			if (intr & ONENAND_INT_MASTER)
@@ -126,7 +140,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 			wait_err("controller error", state, ctrl, intr);
 			return -EIO;
 		}
-		if (!(intr & ONENAND_INT_RESET)) {
+		if ((intr & intr_flags) != intr_flags) {
 			wait_err("timeout", state, ctrl, intr);
 			return -EIO;
 		}
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index ff66e4330aa..f63b1db3ffb 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1,17 +1,19 @@
 /*
  *  linux/drivers/mtd/onenand/onenand_base.c
  *
- *  Copyright (C) 2005-2007 Samsung Electronics
+ *  Copyright © 2005-2009 Samsung Electronics
+ *  Copyright © 2007 Nokia Corporation
+ *
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
  *  Credits:
  *	Adrian Hunter <ext-adrian.hunter@nokia.com>:
  *	auto-placement support, read-while load support, various fixes
- *	Copyright (C) Nokia Corporation, 2007
  *
  *	Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
  *	Flex-OneNAND support
- *	Copyright (C) Samsung Electronics, 2008
+ *	Amul Kumar Saha <amul.saha at samsung.com>
+ *	OTP support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -32,6 +34,13 @@
 
 #include <asm/io.h>
 
+/*
+ * Multiblock erase if number of blocks to erase is 2 or more.
+ * Maximum number of blocks for simultaneous erase is 64.
+ */
+#define MB_ERASE_MIN_BLK_COUNT 2
+#define MB_ERASE_MAX_BLK_COUNT 64
+
 /* Default Flex-OneNAND boundary and lock respectively */
 static int flex_bdry[MAX_DIES * 2] = { -1, 0, -1, 0 };
 
@@ -43,6 +52,18 @@ MODULE_PARM_DESC(flex_bdry,	"SLC Boundary information for Flex-OneNAND"
 				"    : 0->Set boundary in unlocked status"
 				"    : 1->Set boundary in locked status");
 
+/* Default OneNAND/Flex-OneNAND OTP options*/
+static int otp;
+
+module_param(otp, int, 0400);
+MODULE_PARM_DESC(otp,	"Corresponding behaviour of OneNAND in OTP"
+			"Syntax : otp=LOCK_TYPE"
+			"LOCK_TYPE : Keys issued, for specific OTP Lock type"
+			"	   : 0 -> Default (No Blocks Locked)"
+			"	   : 1 -> OTP Block lock"
+			"	   : 2 -> 1st Block lock"
+			"	   : 3 -> BOTH OTP Block and 1st Block lock");
+
 /**
  *  onenand_oob_128 - oob info for Flex-Onenand with 4KB page
  *  For now, we expose only 64 out of 80 ecc bytes
@@ -339,6 +360,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 		break;
 
 	case ONENAND_CMD_ERASE:
+	case ONENAND_CMD_MULTIBLOCK_ERASE:
+	case ONENAND_CMD_ERASE_VERIFY:
 	case ONENAND_CMD_BUFFERRAM:
 	case ONENAND_CMD_OTP_ACCESS:
 		block = onenand_block(this, addr);
@@ -483,7 +506,7 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 		if (interrupt & flags)
 			break;
 
-		if (state != FL_READING)
+		if (state != FL_READING && state != FL_PREPARING_ERASE)
 			cond_resched();
 	}
 	/* To get correct interrupt status in timeout case */
@@ -500,25 +523,40 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 		int ecc = onenand_read_ecc(this);
 		if (ecc) {
 			if (ecc & ONENAND_ECC_2BIT_ALL) {
-				printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
+				printk(KERN_ERR "%s: ECC error = 0x%04x\n",
+					__func__, ecc);
 				mtd->ecc_stats.failed++;
 				return -EBADMSG;
 			} else if (ecc & ONENAND_ECC_1BIT_ALL) {
-				printk(KERN_DEBUG "onenand_wait: correctable ECC error = 0x%04x\n", ecc);
+				printk(KERN_DEBUG "%s: correctable ECC error = 0x%04x\n",
+					__func__, ecc);
 				mtd->ecc_stats.corrected++;
 			}
 		}
 	} else if (state == FL_READING) {
-		printk(KERN_ERR "onenand_wait: read timeout! ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+		printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n",
+			__func__, ctrl, interrupt);
+		return -EIO;
+	}
+
+	if (state == FL_PREPARING_ERASE && !(interrupt & ONENAND_INT_ERASE)) {
+		printk(KERN_ERR "%s: mb erase timeout! ctrl=0x%04x intr=0x%04x\n",
+		       __func__, ctrl, interrupt);
+		return -EIO;
+	}
+
+	if (!(interrupt & ONENAND_INT_MASTER)) {
+		printk(KERN_ERR "%s: timeout! ctrl=0x%04x intr=0x%04x\n",
+		       __func__, ctrl, interrupt);
 		return -EIO;
 	}
 
 	/* If there's controller error, it's a real error */
 	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n",
-			ctrl);
+		printk(KERN_ERR "%s: controller error = 0x%04x\n",
+			__func__, ctrl);
 		if (ctrl & ONENAND_CTRL_LOCK)
-			printk(KERN_ERR "onenand_wait: it's locked error.\n");
+			printk(KERN_ERR "%s: it's locked error.\n", __func__);
 		return -EIO;
 	}
 
@@ -1015,7 +1053,8 @@ static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
 	/* We are attempting to reread, so decrement stats.failed
 	 * which was incremented by onenand_wait due to read failure
 	 */
-	printk(KERN_INFO "onenand_recover_lsb: Attempting to recover from uncorrectable read\n");
+	printk(KERN_INFO "%s: Attempting to recover from uncorrectable read\n",
+		__func__);
 	mtd->ecc_stats.failed--;
 
 	/* Issue the LSB page recovery command */
@@ -1046,7 +1085,8 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 	int ret = 0;
 	int writesize = this->writesize;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_mlc_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
+	      __func__, (unsigned int) from, (int) len);
 
 	if (ops->mode == MTD_OOB_AUTO)
 		oobsize = this->ecclayout->oobavail;
@@ -1057,7 +1097,8 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 
 	/* Do not allow reads past end of device */
 	if (from + len > mtd->size) {
-		printk(KERN_ERR "onenand_mlc_read_ops_nolock: Attempt read beyond end of device\n");
+		printk(KERN_ERR "%s: Attempt read beyond end of device\n",
+			__func__);
 		ops->retlen = 0;
 		ops->oobretlen = 0;
 		return -EINVAL;
@@ -1146,7 +1187,8 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 	int ret = 0, boundary = 0;
 	int writesize = this->writesize;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ops_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
+			__func__, (unsigned int) from, (int) len);
 
 	if (ops->mode == MTD_OOB_AUTO)
 		oobsize = this->ecclayout->oobavail;
@@ -1157,7 +1199,8 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
 
 	/* Do not allow reads past end of device */
 	if ((from + len) > mtd->size) {
-		printk(KERN_ERR "onenand_read_ops_nolock: Attempt read beyond end of device\n");
+		printk(KERN_ERR "%s: Attempt read beyond end of device\n",
+			__func__);
 		ops->retlen = 0;
 		ops->oobretlen = 0;
 		return -EINVAL;
@@ -1275,7 +1318,8 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 
 	from += ops->ooboffs;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob_nolock: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
+		__func__, (unsigned int) from, (int) len);
 
 	/* Initialize return length value */
 	ops->oobretlen = 0;
@@ -1288,7 +1332,8 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 	column = from & (mtd->oobsize - 1);
 
 	if (unlikely(column >= oobsize)) {
-		printk(KERN_ERR "onenand_read_oob_nolock: Attempted to start read outside oob\n");
+		printk(KERN_ERR "%s: Attempted to start read outside oob\n",
+			__func__);
 		return -EINVAL;
 	}
 
@@ -1296,7 +1341,8 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 	if (unlikely(from >= mtd->size ||
 		     column + len > ((mtd->size >> this->page_shift) -
 				     (from >> this->page_shift)) * oobsize)) {
-		printk(KERN_ERR "onenand_read_oob_nolock: Attempted to read beyond end of device\n");
+		printk(KERN_ERR "%s: Attempted to read beyond end of device\n",
+			__func__);
 		return -EINVAL;
 	}
 
@@ -1319,7 +1365,8 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
 			ret = onenand_recover_lsb(mtd, from, ret);
 
 		if (ret && ret != -EBADMSG) {
-			printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
+			printk(KERN_ERR "%s: read failed = 0x%x\n",
+				__func__, ret);
 			break;
 		}
 
@@ -1450,20 +1497,21 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
 	if (interrupt & ONENAND_INT_READ) {
 		int ecc = onenand_read_ecc(this);
 		if (ecc & ONENAND_ECC_2BIT_ALL) {
-			printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
-				", controller error 0x%04x\n", ecc, ctrl);
+			printk(KERN_WARNING "%s: ecc error = 0x%04x, "
+				"controller error 0x%04x\n",
+				__func__, ecc, ctrl);
 			return ONENAND_BBT_READ_ECC_ERROR;
 		}
 	} else {
-		printk(KERN_ERR "onenand_bbt_wait: read timeout!"
-			"ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+		printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n",
+			__func__, ctrl, interrupt);
 		return ONENAND_BBT_READ_FATAL_ERROR;
 	}
 
 	/* Initial bad block case: 0x2400 or 0x0400 */
 	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_DEBUG "onenand_bbt_wait: "
-			"controller error = 0x%04x\n", ctrl);
+		printk(KERN_DEBUG "%s: controller error = 0x%04x\n",
+			__func__, ctrl);
 		return ONENAND_BBT_READ_ERROR;
 	}
 
@@ -1487,14 +1535,16 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
 	size_t len = ops->ooblen;
 	u_char *buf = ops->oobbuf;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", (unsigned int) from, len);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %zi\n",
+		__func__, (unsigned int) from, len);
 
 	/* Initialize return value */
 	ops->oobretlen = 0;
 
 	/* Do not allow reads past end of device */
 	if (unlikely((from + len) > mtd->size)) {
-		printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n");
+		printk(KERN_ERR "%s: Attempt read beyond end of device\n",
+			__func__);
 		return ONENAND_BBT_READ_FATAL_ERROR;
 	}
 
@@ -1661,21 +1711,23 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
 	/* Wait for any existing operation to clear */
 	onenand_panic_wait(mtd);
 
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_panic_write: to = 0x%08x, len = %i\n",
-	      (unsigned int) to, (int) len);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+		__func__, (unsigned int) to, (int) len);
 
 	/* Initialize retlen, in case of early exit */
 	*retlen = 0;
 
 	/* Do not allow writes past end of device */
 	if (unlikely((to + len) > mtd->size)) {
-		printk(KERN_ERR "onenand_panic_write: Attempt write to past end of device\n");
+		printk(KERN_ERR "%s: Attempt write to past end of device\n",
+			__func__);
 		return -EINVAL;
 	}
 
 	/* Reject writes, which are not page aligned */
         if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
-                printk(KERN_ERR "onenand_panic_write: Attempt to write not page aligned data\n");
+		printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
+			__func__);
                 return -EINVAL;
         }
 
@@ -1711,7 +1763,7 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
 		}
 
 		if (ret) {
-			printk(KERN_ERR "onenand_panic_write: write failed %d\n", ret);
+			printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
 			break;
 		}
 
@@ -1792,7 +1844,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 	u_char *oobbuf;
 	int ret = 0;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ops_nolock: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+		__func__, (unsigned int) to, (int) len);
 
 	/* Initialize retlen, in case of early exit */
 	ops->retlen = 0;
@@ -1800,13 +1853,15 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 
 	/* Do not allow writes past end of device */
 	if (unlikely((to + len) > mtd->size)) {
-		printk(KERN_ERR "onenand_write_ops_nolock: Attempt write to past end of device\n");
+		printk(KERN_ERR "%s: Attempt write to past end of device\n",
+			__func__);
 		return -EINVAL;
 	}
 
 	/* Reject writes, which are not page aligned */
         if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
-                printk(KERN_ERR "onenand_write_ops_nolock: Attempt to write not page aligned data\n");
+		printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
+			__func__);
                 return -EINVAL;
         }
 
@@ -1879,7 +1934,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 			onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
 			if (ret) {
 				written -= prevlen;
-				printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
+				printk(KERN_ERR "%s: write failed %d\n",
+					__func__, ret);
 				break;
 			}
 
@@ -1887,7 +1943,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 				/* Only check verify write turn on */
 				ret = onenand_verify(mtd, buf - len, to - len, len);
 				if (ret)
-					printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
+					printk(KERN_ERR "%s: verify failed %d\n",
+						__func__, ret);
 				break;
 			}
 
@@ -1905,14 +1962,16 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 			/* In partial page write we don't update bufferram */
 			onenand_update_bufferram(mtd, to, !ret && !subpage);
 			if (ret) {
-				printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
+				printk(KERN_ERR "%s: write failed %d\n",
+					__func__, ret);
 				break;
 			}
 
 			/* Only check verify write turn on */
 			ret = onenand_verify(mtd, buf, to, thislen);
 			if (ret) {
-				printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
+				printk(KERN_ERR "%s: verify failed %d\n",
+					__func__, ret);
 				break;
 			}
 
@@ -1968,7 +2027,8 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 
 	to += ops->ooboffs;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob_nolock: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+		__func__, (unsigned int) to, (int) len);
 
 	/* Initialize retlen, in case of early exit */
 	ops->oobretlen = 0;
@@ -1981,14 +2041,15 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 	column = to & (mtd->oobsize - 1);
 
 	if (unlikely(column >= oobsize)) {
-		printk(KERN_ERR "onenand_write_oob_nolock: Attempted to start write outside oob\n");
+		printk(KERN_ERR "%s: Attempted to start write outside oob\n",
+			__func__);
 		return -EINVAL;
 	}
 
 	/* For compatibility with NAND: Do not allow write past end of page */
 	if (unlikely(column + len > oobsize)) {
-		printk(KERN_ERR "onenand_write_oob_nolock: "
-		      "Attempt to write past end of page\n");
+		printk(KERN_ERR "%s: Attempt to write past end of page\n",
+			__func__);
 		return -EINVAL;
 	}
 
@@ -1996,7 +2057,8 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 	if (unlikely(to >= mtd->size ||
 		     column + len > ((mtd->size >> this->page_shift) -
 				     (to >> this->page_shift)) * oobsize)) {
-		printk(KERN_ERR "onenand_write_oob_nolock: Attempted to write past end of device\n");
+		printk(KERN_ERR "%s: Attempted to write past end of device\n",
+		       __func__);
 		return -EINVAL;
 	}
 
@@ -2038,13 +2100,14 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
 
 		ret = this->wait(mtd, FL_WRITING);
 		if (ret) {
-			printk(KERN_ERR "onenand_write_oob_nolock: write failed %d\n", ret);
+			printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
 			break;
 		}
 
 		ret = onenand_verify_oob(mtd, oobbuf, to);
 		if (ret) {
-			printk(KERN_ERR "onenand_write_oob_nolock: verify failed %d\n", ret);
+			printk(KERN_ERR "%s: verify failed %d\n",
+				__func__, ret);
 			break;
 		}
 
@@ -2140,78 +2203,186 @@ static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allo
 	return bbm->isbad_bbt(mtd, ofs, allowbbt);
 }
 
+
+static int onenand_multiblock_erase_verify(struct mtd_info *mtd,
+					   struct erase_info *instr)
+{
+	struct onenand_chip *this = mtd->priv;
+	loff_t addr = instr->addr;
+	int len = instr->len;
+	unsigned int block_size = (1 << this->erase_shift);
+	int ret = 0;
+
+	while (len) {
+		this->command(mtd, ONENAND_CMD_ERASE_VERIFY, addr, block_size);
+		ret = this->wait(mtd, FL_VERIFYING_ERASE);
+		if (ret) {
+			printk(KERN_ERR "%s: Failed verify, block %d\n",
+			       __func__, onenand_block(this, addr));
+			instr->state = MTD_ERASE_FAILED;
+			instr->fail_addr = addr;
+			return -1;
+		}
+		len -= block_size;
+		addr += block_size;
+	}
+	return 0;
+}
+
 /**
- * onenand_erase - [MTD Interface] erase block(s)
+ * onenand_multiblock_erase - [Internal] erase block(s) using multiblock erase
  * @param mtd		MTD device structure
  * @param instr		erase instruction
+ * @param region	erase region
  *
- * Erase one ore more blocks
+ * Erase one or more blocks up to 64 block at a time
  */
-static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
+static int onenand_multiblock_erase(struct mtd_info *mtd,
+				    struct erase_info *instr,
+				    unsigned int block_size)
 {
 	struct onenand_chip *this = mtd->priv;
-	unsigned int block_size;
 	loff_t addr = instr->addr;
-	loff_t len = instr->len;
-	int ret = 0, i;
-	struct mtd_erase_region_info *region = NULL;
-	loff_t region_end = 0;
+	int len = instr->len;
+	int eb_count = 0;
+	int ret = 0;
+	int bdry_block = 0;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%012llx, len = %llu\n", (unsigned long long) instr->addr, (unsigned long long) instr->len);
+	instr->state = MTD_ERASING;
 
-	/* Do not allow erase past end of device */
-	if (unlikely((len + addr) > mtd->size)) {
-		printk(KERN_ERR "onenand_erase: Erase past end of device\n");
-		return -EINVAL;
+	if (ONENAND_IS_DDP(this)) {
+		loff_t bdry_addr = this->chipsize >> 1;
+		if (addr < bdry_addr && (addr + len) > bdry_addr)
+			bdry_block = bdry_addr >> this->erase_shift;
 	}
 
-	if (FLEXONENAND(this)) {
-		/* Find the eraseregion of this address */
-		i = flexonenand_region(mtd, addr);
-		region = &mtd->eraseregions[i];
+	/* Pre-check bbs */
+	while (len) {
+		/* Check if we have a bad block, we do not erase bad blocks */
+		if (onenand_block_isbad_nolock(mtd, addr, 0)) {
+			printk(KERN_WARNING "%s: attempt to erase a bad block "
+			       "at addr 0x%012llx\n",
+			       __func__, (unsigned long long) addr);
+			instr->state = MTD_ERASE_FAILED;
+			return -EIO;
+		}
+		len -= block_size;
+		addr += block_size;
+	}
 
-		block_size = region->erasesize;
-		region_end = region->offset + region->erasesize * region->numblocks;
+	len = instr->len;
+	addr = instr->addr;
 
-		/* Start address within region must align on block boundary.
-		 * Erase region's start offset is always block start address.
-		 */
-		if (unlikely((addr - region->offset) & (block_size - 1))) {
-			printk(KERN_ERR "onenand_erase: Unaligned address\n");
-			return -EINVAL;
+	/* loop over 64 eb batches */
+	while (len) {
+		struct erase_info verify_instr = *instr;
+		int max_eb_count = MB_ERASE_MAX_BLK_COUNT;
+
+		verify_instr.addr = addr;
+		verify_instr.len = 0;
+
+		/* do not cross chip boundary */
+		if (bdry_block) {
+			int this_block = (addr >> this->erase_shift);
+
+			if (this_block < bdry_block) {
+				max_eb_count = min(max_eb_count,
+						   (bdry_block - this_block));
+			}
 		}
-	} else {
-		block_size = 1 << this->erase_shift;
 
-		/* Start address must align on block boundary */
-		if (unlikely(addr & (block_size - 1))) {
-			printk(KERN_ERR "onenand_erase: Unaligned address\n");
-			return -EINVAL;
+		eb_count = 0;
+
+		while (len > block_size && eb_count < (max_eb_count - 1)) {
+			this->command(mtd, ONENAND_CMD_MULTIBLOCK_ERASE,
+				      addr, block_size);
+			onenand_invalidate_bufferram(mtd, addr, block_size);
+
+			ret = this->wait(mtd, FL_PREPARING_ERASE);
+			if (ret) {
+				printk(KERN_ERR "%s: Failed multiblock erase, "
+				       "block %d\n", __func__,
+				       onenand_block(this, addr));
+				instr->state = MTD_ERASE_FAILED;
+				instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
+				return -EIO;
+			}
+
+			len -= block_size;
+			addr += block_size;
+			eb_count++;
+		}
+
+		/* last block of 64-eb series */
+		cond_resched();
+		this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
+		onenand_invalidate_bufferram(mtd, addr, block_size);
+
+		ret = this->wait(mtd, FL_ERASING);
+		/* Check if it is write protected */
+		if (ret) {
+			printk(KERN_ERR "%s: Failed erase, block %d\n",
+			       __func__, onenand_block(this, addr));
+			instr->state = MTD_ERASE_FAILED;
+			instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
+			return -EIO;
+		}
+
+		len -= block_size;
+		addr += block_size;
+		eb_count++;
+
+		/* verify */
+		verify_instr.len = eb_count * block_size;
+		if (onenand_multiblock_erase_verify(mtd, &verify_instr)) {
+			instr->state = verify_instr.state;
+			instr->fail_addr = verify_instr.fail_addr;
+			return -EIO;
 		}
-	}
 
-	/* Length must align on block boundary */
-	if (unlikely(len & (block_size - 1))) {
-		printk(KERN_ERR "onenand_erase: Length not block aligned\n");
-		return -EINVAL;
 	}
+	return 0;
+}
 
-	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
 
-	/* Grab the lock and see if the device is available */
-	onenand_get_device(mtd, FL_ERASING);
+/**
+ * onenand_block_by_block_erase - [Internal] erase block(s) using regular erase
+ * @param mtd		MTD device structure
+ * @param instr		erase instruction
+ * @param region	erase region
+ * @param block_size	erase block size
+ *
+ * Erase one or more blocks one block at a time
+ */
+static int onenand_block_by_block_erase(struct mtd_info *mtd,
+					struct erase_info *instr,
+					struct mtd_erase_region_info *region,
+					unsigned int block_size)
+{
+	struct onenand_chip *this = mtd->priv;
+	loff_t addr = instr->addr;
+	int len = instr->len;
+	loff_t region_end = 0;
+	int ret = 0;
+
+	if (region) {
+		/* region is set for Flex-OneNAND */
+		region_end = region->offset + region->erasesize * region->numblocks;
+	}
 
-	/* Loop through the blocks */
 	instr->state = MTD_ERASING;
 
+	/* Loop through the blocks */
 	while (len) {
 		cond_resched();
 
 		/* Check if we have a bad block, we do not erase bad blocks */
 		if (onenand_block_isbad_nolock(mtd, addr, 0)) {
-			printk (KERN_WARNING "onenand_erase: attempt to erase a bad block at addr 0x%012llx\n", (unsigned long long) addr);
+			printk(KERN_WARNING "%s: attempt to erase a bad block "
+					"at addr 0x%012llx\n",
+					__func__, (unsigned long long) addr);
 			instr->state = MTD_ERASE_FAILED;
-			goto erase_exit;
+			return -EIO;
 		}
 
 		this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
@@ -2221,11 +2392,11 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 		ret = this->wait(mtd, FL_ERASING);
 		/* Check, if it is write protected */
 		if (ret) {
-			printk(KERN_ERR "onenand_erase: Failed erase, block %d\n",
-						 onenand_block(this, addr));
+			printk(KERN_ERR "%s: Failed erase, block %d\n",
+				__func__, onenand_block(this, addr));
 			instr->state = MTD_ERASE_FAILED;
 			instr->fail_addr = addr;
-			goto erase_exit;
+			return -EIO;
 		}
 
 		len -= block_size;
@@ -2241,25 +2412,88 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 			if (len & (block_size - 1)) {
 				/* FIXME: This should be handled at MTD partitioning level. */
-				printk(KERN_ERR "onenand_erase: Unaligned address\n");
-				goto erase_exit;
+				printk(KERN_ERR "%s: Unaligned address\n",
+					__func__);
+				return -EIO;
 			}
 		}
+	}
+	return 0;
+}
+
+/**
+ * onenand_erase - [MTD Interface] erase block(s)
+ * @param mtd		MTD device structure
+ * @param instr		erase instruction
+ *
+ * Erase one or more blocks
+ */
+static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int block_size;
+	loff_t addr = instr->addr;
+	loff_t len = instr->len;
+	int ret = 0;
+	struct mtd_erase_region_info *region = NULL;
+	loff_t region_offset = 0;
+
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: start=0x%012llx, len=%llu\n", __func__,
+	      (unsigned long long) instr->addr, (unsigned long long) instr->len);
+
+	/* Do not allow erase past end of device */
+	if (unlikely((len + addr) > mtd->size)) {
+		printk(KERN_ERR "%s: Erase past end of device\n", __func__);
+		return -EINVAL;
+	}
+
+	if (FLEXONENAND(this)) {
+		/* Find the eraseregion of this address */
+		int i = flexonenand_region(mtd, addr);
+
+		region = &mtd->eraseregions[i];
+		block_size = region->erasesize;
+
+		/* Start address within region must align on block boundary.
+		 * Erase region's start offset is always block start address.
+		 */
+		region_offset = region->offset;
+	} else
+		block_size = 1 << this->erase_shift;
+
+	/* Start address must align on block boundary */
+	if (unlikely((addr - region_offset) & (block_size - 1))) {
+		printk(KERN_ERR "%s: Unaligned address\n", __func__);
+		return -EINVAL;
+	}
 
+	/* Length must align on block boundary */
+	if (unlikely(len & (block_size - 1))) {
+		printk(KERN_ERR "%s: Length not block aligned\n", __func__);
+		return -EINVAL;
 	}
 
-	instr->state = MTD_ERASE_DONE;
+	instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
 
-erase_exit:
+	/* Grab the lock and see if the device is available */
+	onenand_get_device(mtd, FL_ERASING);
 
-	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
+	if (region || instr->len < MB_ERASE_MIN_BLK_COUNT * block_size) {
+		/* region is set for Flex-OneNAND (no mb erase) */
+		ret = onenand_block_by_block_erase(mtd, instr,
+						   region, block_size);
+	} else {
+		ret = onenand_multiblock_erase(mtd, instr, block_size);
+	}
 
 	/* Deselect and wake up anyone waiting on the device */
 	onenand_release_device(mtd);
 
 	/* Do call back function */
-	if (!ret)
+	if (!ret) {
+		instr->state = MTD_ERASE_DONE;
 		mtd_erase_callback(instr);
+	}
 
 	return ret;
 }
@@ -2272,7 +2506,7 @@ erase_exit:
  */
 static void onenand_sync(struct mtd_info *mtd)
 {
-	DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n");
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_SYNCING);
@@ -2406,7 +2640,8 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
 		/* Check lock status */
 		status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
 		if (!(status & wp_status_mask))
-			printk(KERN_ERR "wp status = 0x%x\n", status);
+			printk(KERN_ERR "%s: wp status = 0x%x\n",
+				__func__, status);
 
 		return 0;
 	}
@@ -2435,7 +2670,8 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
 		/* Check lock status */
 		status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
 		if (!(status & wp_status_mask))
-			printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
+			printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n",
+				__func__, block, status);
 	}
 
 	return 0;
@@ -2502,7 +2738,8 @@ static int onenand_check_lock_status(struct onenand_chip *this)
 		/* Check lock status */
 		status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
 		if (!(status & ONENAND_WP_US)) {
-			printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
+			printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n",
+				__func__, block, status);
 			return 0;
 		}
 	}
@@ -2557,6 +2794,208 @@ static void onenand_unlock_all(struct mtd_info *mtd)
 
 #ifdef CONFIG_MTD_ONENAND_OTP
 
+/**
+ * onenand_otp_command - Send OTP specific command to OneNAND device
+ * @param mtd	 MTD device structure
+ * @param cmd	 the command to be sent
+ * @param addr	 offset to read from or write to
+ * @param len	 number of bytes to read or write
+ */
+static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr,
+				size_t len)
+{
+	struct onenand_chip *this = mtd->priv;
+	int value, block, page;
+
+	/* Address translation */
+	switch (cmd) {
+	case ONENAND_CMD_OTP_ACCESS:
+		block = (int) (addr >> this->erase_shift);
+		page = -1;
+		break;
+
+	default:
+		block = (int) (addr >> this->erase_shift);
+		page = (int) (addr >> this->page_shift);
+
+		if (ONENAND_IS_2PLANE(this)) {
+			/* Make the even block number */
+			block &= ~1;
+			/* Is it the odd plane? */
+			if (addr & this->writesize)
+				block++;
+			page >>= 1;
+		}
+		page &= this->page_mask;
+		break;
+	}
+
+	if (block != -1) {
+		/* Write 'DFS, FBA' of Flash */
+		value = onenand_block_address(this, block);
+		this->write_word(value, this->base +
+				ONENAND_REG_START_ADDRESS1);
+	}
+
+	if (page != -1) {
+		/* Now we use page size operation */
+		int sectors = 4, count = 4;
+		int dataram;
+
+		switch (cmd) {
+		default:
+			if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
+				cmd = ONENAND_CMD_2X_PROG;
+			dataram = ONENAND_CURRENT_BUFFERRAM(this);
+			break;
+		}
+
+		/* Write 'FPA, FSA' of Flash */
+		value = onenand_page_address(page, sectors);
+		this->write_word(value, this->base +
+				ONENAND_REG_START_ADDRESS8);
+
+		/* Write 'BSA, BSC' of DataRAM */
+		value = onenand_buffer_address(dataram, sectors, count);
+		this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
+	}
+
+	/* Interrupt clear */
+	this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
+
+	/* Write command */
+	this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
+
+	return 0;
+}
+
+/**
+ * onenand_otp_write_oob_nolock - [Internal] OneNAND write out-of-band, specific to OTP
+ * @param mtd		MTD device structure
+ * @param to		offset to write to
+ * @param len		number of bytes to write
+ * @param retlen	pointer to variable to store the number of written bytes
+ * @param buf		the data to write
+ *
+ * OneNAND write out-of-band only for OTP
+ */
+static int onenand_otp_write_oob_nolock(struct mtd_info *mtd, loff_t to,
+				    struct mtd_oob_ops *ops)
+{
+	struct onenand_chip *this = mtd->priv;
+	int column, ret = 0, oobsize;
+	int written = 0;
+	u_char *oobbuf;
+	size_t len = ops->ooblen;
+	const u_char *buf = ops->oobbuf;
+	int block, value, status;
+
+	to += ops->ooboffs;
+
+	/* Initialize retlen, in case of early exit */
+	ops->oobretlen = 0;
+
+	oobsize = mtd->oobsize;
+
+	column = to & (mtd->oobsize - 1);
+
+	oobbuf = this->oob_buf;
+
+	/* Loop until all data write */
+	while (written < len) {
+		int thislen = min_t(int, oobsize, len - written);
+
+		cond_resched();
+
+		block = (int) (to >> this->erase_shift);
+		/*
+		 * Write 'DFS, FBA' of Flash
+		 * Add: F100h DQ=DFS, FBA
+		 */
+
+		value = onenand_block_address(this, block);
+		this->write_word(value, this->base +
+				ONENAND_REG_START_ADDRESS1);
+
+		/*
+		 * Select DataRAM for DDP
+		 * Add: F101h DQ=DBS
+		 */
+
+		value = onenand_bufferram_address(this, block);
+		this->write_word(value, this->base +
+				ONENAND_REG_START_ADDRESS2);
+		ONENAND_SET_NEXT_BUFFERRAM(this);
+
+		/*
+		 * Enter OTP access mode
+		 */
+		this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
+		this->wait(mtd, FL_OTPING);
+
+		/* We send data to spare ram with oobsize
+		 * to prevent byte access */
+		memcpy(oobbuf + column, buf, thislen);
+
+		/*
+		 * Write Data into DataRAM
+		 * Add: 8th Word
+		 * in sector0/spare/page0
+		 * DQ=XXFCh
+		 */
+		this->write_bufferram(mtd, ONENAND_SPARERAM,
+					oobbuf, 0, mtd->oobsize);
+
+		onenand_otp_command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
+		onenand_update_bufferram(mtd, to, 0);
+		if (ONENAND_IS_2PLANE(this)) {
+			ONENAND_SET_BUFFERRAM1(this);
+			onenand_update_bufferram(mtd, to + this->writesize, 0);
+		}
+
+		ret = this->wait(mtd, FL_WRITING);
+		if (ret) {
+			printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
+			break;
+		}
+
+		/* Exit OTP access mode */
+		this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+		this->wait(mtd, FL_RESETING);
+
+		status = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+		status &= 0x60;
+
+		if (status == 0x60) {
+			printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
+			printk(KERN_DEBUG "1st Block\tLOCKED\n");
+			printk(KERN_DEBUG "OTP Block\tLOCKED\n");
+		} else if (status == 0x20) {
+			printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
+			printk(KERN_DEBUG "1st Block\tLOCKED\n");
+			printk(KERN_DEBUG "OTP Block\tUN-LOCKED\n");
+		} else if (status == 0x40) {
+			printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
+			printk(KERN_DEBUG "1st Block\tUN-LOCKED\n");
+			printk(KERN_DEBUG "OTP Block\tLOCKED\n");
+		} else {
+			printk(KERN_DEBUG "Reboot to check\n");
+		}
+
+		written += thislen;
+		if (written == len)
+			break;
+
+		to += mtd->writesize;
+		buf += thislen;
+		column = 0;
+	}
+
+	ops->oobretlen = written;
+
+	return ret;
+}
+
 /* Internal OTP operation */
 typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
 		size_t *retlen, u_char *buf);
@@ -2659,11 +3098,11 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
 	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Enter OTP access mode */
-	this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
-	this->wait(mtd, FL_OTPING);
-
 	if (FLEXONENAND(this)) {
+
+		/* Enter OTP access mode */
+		this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
+		this->wait(mtd, FL_OTPING);
 		/*
 		 * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
 		 * main area of page 49.
@@ -2674,19 +3113,19 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
 		ops.oobbuf = NULL;
 		ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops);
 		*retlen = ops.retlen;
+
+		/* Exit OTP access mode */
+		this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+		this->wait(mtd, FL_RESETING);
 	} else {
 		ops.mode = MTD_OOB_PLACE;
 		ops.ooblen = len;
 		ops.oobbuf = buf;
 		ops.ooboffs = 0;
-		ret = onenand_write_oob_nolock(mtd, from, &ops);
+		ret = onenand_otp_write_oob_nolock(mtd, from, &ops);
 		*retlen = ops.oobretlen;
 	}
 
-	/* Exit OTP access mode */
-	this->command(mtd, ONENAND_CMD_RESET, 0, 0);
-	this->wait(mtd, FL_RESETING);
-
 	return ret;
 }
 
@@ -2717,16 +3156,21 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
 	if (density < ONENAND_DEVICE_DENSITY_512Mb)
 		otp_pages = 20;
 	else
-		otp_pages = 10;
+		otp_pages = 50;
 
 	if (mode == MTD_OTP_FACTORY) {
 		from += mtd->writesize * otp_pages;
-		otp_pages = 64 - otp_pages;
+		otp_pages = ONENAND_PAGES_PER_BLOCK - otp_pages;
 	}
 
 	/* Check User/Factory boundary */
-	if (((mtd->writesize * otp_pages) - (from + len)) < 0)
-		return 0;
+	if (mode == MTD_OTP_USER) {
+		if (mtd->writesize * otp_pages < from + len)
+			return 0;
+	} else {
+		if (mtd->writesize * otp_pages <  len)
+			return 0;
+	}
 
 	onenand_get_device(mtd, FL_OTPING);
 	while (len > 0 && otp_pages > 0) {
@@ -2749,13 +3193,12 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
 			*retlen += sizeof(struct otp_info);
 		} else {
 			size_t tmp_retlen;
-			int size = len;
 
 			ret = action(mtd, from, len, &tmp_retlen, buf);
 
-			buf += size;
-			len -= size;
-			*retlen += size;
+			buf += tmp_retlen;
+			len -= tmp_retlen;
+			*retlen += tmp_retlen;
 
 			if (ret)
 				break;
@@ -2868,21 +3311,11 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 	u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf;
 	size_t retlen;
 	int ret;
+	unsigned int otp_lock_offset = ONENAND_OTP_LOCK_OFFSET;
 
 	memset(buf, 0xff, FLEXONENAND(this) ? this->writesize
 						 : mtd->oobsize);
 	/*
-	 * Note: OTP lock operation
-	 *       OTP block : 0xXXFC
-	 *       1st block : 0xXXF3 (If chip support)
-	 *       Both      : 0xXXF0 (If chip support)
-	 */
-	if (FLEXONENAND(this))
-		buf[FLEXONENAND_OTP_LOCK_OFFSET] = 0xFC;
-	else
-		buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
-
-	/*
 	 * Write lock mark to 8th word of sector0 of page0 of the spare0.
 	 * We write 16 bytes spare area instead of 2 bytes.
 	 * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
@@ -2892,10 +3325,30 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 	from = 0;
 	len = FLEXONENAND(this) ? mtd->writesize : 16;
 
+	/*
+	 * Note: OTP lock operation
+	 *       OTP block : 0xXXFC			XX 1111 1100
+	 *       1st block : 0xXXF3 (If chip support)	XX 1111 0011
+	 *       Both      : 0xXXF0 (If chip support)	XX 1111 0000
+	 */
+	if (FLEXONENAND(this))
+		otp_lock_offset = FLEXONENAND_OTP_LOCK_OFFSET;
+
+	/* ONENAND_OTP_AREA | ONENAND_OTP_BLOCK0 | ONENAND_OTP_AREA_BLOCK0 */
+	if (otp == 1)
+		buf[otp_lock_offset] = 0xFC;
+	else if (otp == 2)
+		buf[otp_lock_offset] = 0xF3;
+	else if (otp == 3)
+		buf[otp_lock_offset] = 0xF0;
+	else if (otp != 0)
+		printk(KERN_DEBUG "[OneNAND] Invalid option selected for OTP\n");
+
 	ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER);
 
 	return ret ? : retlen;
 }
+
 #endif	/* CONFIG_MTD_ONENAND_OTP */
 
 /**
@@ -3172,7 +3625,8 @@ static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int
 				break;
 
 		if (i != mtd->oobsize) {
-			printk(KERN_WARNING "Block %d not erased.\n", block);
+			printk(KERN_WARNING "%s: Block %d not erased.\n",
+				__func__, block);
 			return 1;
 		}
 	}
@@ -3204,8 +3658,8 @@ int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 	blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
 
 	if (boundary >= blksperdie) {
-		printk(KERN_ERR "flexonenand_set_boundary: Invalid boundary value. "
-				"Boundary not changed.\n");
+		printk(KERN_ERR "%s: Invalid boundary value. "
+				"Boundary not changed.\n", __func__);
 		return -EINVAL;
 	}
 
@@ -3214,7 +3668,8 @@ int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 	new = boundary + (die * this->density_mask);
 	ret = flexonenand_check_blocks_erased(mtd, min(old, new) + 1, max(old, new));
 	if (ret) {
-		printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n");
+		printk(KERN_ERR "%s: Please erase blocks "
+				"before boundary change\n", __func__);
 		return ret;
 	}
 
@@ -3227,12 +3682,12 @@ int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 
 	thisboundary = this->read_word(this->base + ONENAND_DATARAM);
 	if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
-		printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n");
+		printk(KERN_ERR "%s: boundary locked\n", __func__);
 		ret = 1;
 		goto out;
 	}
 
-	printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n",
+	printk(KERN_INFO "Changing die %d boundary: %d%s\n",
 			die, boundary, lock ? "(Locked)" : "(Unlocked)");
 
 	addr = die ? this->diesize[0] : 0;
@@ -3243,7 +3698,8 @@ int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 	this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
 	ret = this->wait(mtd, FL_ERASING);
 	if (ret) {
-		printk(KERN_ERR "flexonenand_set_boundary: Failed PI erase for Die %d\n", die);
+		printk(KERN_ERR "%s: Failed PI erase for Die %d\n",
+		       __func__, die);
 		goto out;
 	}
 
@@ -3251,7 +3707,8 @@ int flexonenand_set_boundary(struct mtd_info *mtd, int die,
 	this->command(mtd, ONENAND_CMD_PROG, addr, 0);
 	ret = this->wait(mtd, FL_WRITING);
 	if (ret) {
-		printk(KERN_ERR "flexonenand_set_boundary: Failed PI write for Die %d\n", die);
+		printk(KERN_ERR "%s: Failed PI write for Die %d\n",
+			__func__, die);
 		goto out;
 	}
 
@@ -3408,8 +3865,8 @@ static void onenand_resume(struct mtd_info *mtd)
 	if (this->state == FL_PM_SUSPENDED)
 		onenand_release_device(mtd);
 	else
-		printk(KERN_ERR "resume() called for the chip which is not"
-				"in suspended state\n");
+		printk(KERN_ERR "%s: resume() called for the chip which is not "
+				"in suspended state\n", __func__);
 }
 
 /**
@@ -3464,7 +3921,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (!this->page_buf) {
 		this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
 		if (!this->page_buf) {
-			printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n");
+			printk(KERN_ERR "%s: Can't allocate page_buf\n",
+				__func__);
 			return -ENOMEM;
 		}
 		this->options |= ONENAND_PAGEBUF_ALLOC;
@@ -3472,7 +3930,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (!this->oob_buf) {
 		this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 		if (!this->oob_buf) {
-			printk(KERN_ERR "onenand_scan(): Can't allocate oob_buf\n");
+			printk(KERN_ERR "%s: Can't allocate oob_buf\n",
+				__func__);
 			if (this->options & ONENAND_PAGEBUF_ALLOC) {
 				this->options &= ~ONENAND_PAGEBUF_ALLOC;
 				kfree(this->page_buf);
@@ -3505,8 +3964,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 		break;
 
 	default:
-		printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n",
-			mtd->oobsize);
+		printk(KERN_WARNING "%s: No OOB scheme defined for oobsize %d\n",
+			__func__, mtd->oobsize);
 		mtd->subpage_sft = 0;
 		/* To prevent kernel oops */
 		this->ecclayout = &onenand_oob_32;
diff --git a/drivers/mtd/tests/Makefile b/drivers/mtd/tests/Makefile
index c1d50133500..b44dcab940d 100644
--- a/drivers/mtd/tests/Makefile
+++ b/drivers/mtd/tests/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_MTD_TESTS) += mtd_speedtest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_stresstest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_subpagetest.o
 obj-$(CONFIG_MTD_TESTS) += mtd_torturetest.o
+obj-$(CONFIG_MTD_TESTS) += mtd_nandecctest.o
diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c
new file mode 100644
index 00000000000..c1f31051784
--- /dev/null
+++ b/drivers/mtd/tests/mtd_nandecctest.c
@@ -0,0 +1,87 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/mtd/nand_ecc.h>
+
+#if defined(CONFIG_MTD_NAND) || defined(CONFIG_MTD_NAND_MODULE)
+
+static void inject_single_bit_error(void *data, size_t size)
+{
+	unsigned long offset = random32() % (size * BITS_PER_BYTE);
+
+	__change_bit(offset, data);
+}
+
+static unsigned char data[512];
+static unsigned char error_data[512];
+
+static int nand_ecc_test(const size_t size)
+{
+	unsigned char code[3];
+	unsigned char error_code[3];
+	char testname[30];
+
+	BUG_ON(sizeof(data) < size);
+
+	sprintf(testname, "nand-ecc-%zu", size);
+
+	get_random_bytes(data, size);
+
+	memcpy(error_data, data, size);
+	inject_single_bit_error(error_data, size);
+
+	__nand_calculate_ecc(data, size, code);
+	__nand_calculate_ecc(error_data, size, error_code);
+	__nand_correct_data(error_data, code, error_code, size);
+
+	if (!memcmp(data, error_data, size)) {
+		printk(KERN_INFO "mtd_nandecctest: ok - %s\n", testname);
+		return 0;
+	}
+
+	printk(KERN_ERR "mtd_nandecctest: not ok - %s\n", testname);
+
+	printk(KERN_DEBUG "hexdump of data:\n");
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 4,
+			data, size, false);
+	printk(KERN_DEBUG "hexdump of error data:\n");
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 4,
+			error_data, size, false);
+
+	return -1;
+}
+
+#else
+
+static int nand_ecc_test(const size_t size)
+{
+	return 0;
+}
+
+#endif
+
+static int __init ecc_test_init(void)
+{
+	srandom32(jiffies);
+
+	nand_ecc_test(256);
+	nand_ecc_test(512);
+
+	return 0;
+}
+
+static void __exit ecc_test_exit(void)
+{
+}
+
+module_init(ecc_test_init);
+module_exit(ecc_test_exit);
+
+MODULE_DESCRIPTION("NAND ECC function test module");
+MODULE_AUTHOR("Akinobu Mita");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c
index 5553cd4eab2..5813920e79a 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/mtd_oobtest.c
@@ -343,7 +343,6 @@ static int scan_for_bad_eraseblocks(void)
 		printk(PRINT_PREF "error: cannot allocate memory\n");
 		return -ENOMEM;
 	}
-	memset(bbt, 0 , ebcnt);
 
 	printk(PRINT_PREF "scanning for bad eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
@@ -392,7 +391,6 @@ static int __init mtd_oobtest_init(void)
 	       mtd->writesize, ebcnt, pgcnt, mtd->oobsize);
 
 	err = -ENOMEM;
-	mtd->erasesize = mtd->erasesize;
 	readbuf = kmalloc(mtd->erasesize, GFP_KERNEL);
 	if (!readbuf) {
 		printk(PRINT_PREF "error: cannot allocate memory\n");
@@ -476,18 +474,10 @@ static int __init mtd_oobtest_init(void)
 	use_len_max = mtd->ecclayout->oobavail;
 	vary_offset = 1;
 	simple_srand(5);
-	printk(PRINT_PREF "writing OOBs of whole device\n");
-	for (i = 0; i < ebcnt; ++i) {
-		if (bbt[i])
-			continue;
-		err = write_eraseblock(i);
-		if (err)
-			goto out;
-		if (i % 256 == 0)
-			printk(PRINT_PREF "written up to eraseblock %u\n", i);
-		cond_resched();
-	}
-	printk(PRINT_PREF "written %u eraseblocks\n", i);
+
+	err = write_whole_device();
+	if (err)
+		goto out;
 
 	/* Check all eraseblocks */
 	use_offset = 0;
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 103cac480fe..ce17cbe918c 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -523,6 +523,7 @@ static int __init mtd_pagetest_init(void)
 	do_div(tmp, mtd->erasesize);
 	ebcnt = tmp;
 	pgcnt = mtd->erasesize / mtd->writesize;
+	pgsize = mtd->writesize;
 
 	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
 	       "page size %u, count of eraseblocks %u, pages per "
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index 090c556ffed..3b6f2fa12cf 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -700,7 +700,8 @@ static int jffs2_garbage_collect_metadata(struct jffs2_sb_info *c, struct jffs2_
 	struct jffs2_raw_inode ri;
 	struct jffs2_node_frag *last_frag;
 	union jffs2_device_node dev;
-	char *mdata = NULL, mdatalen = 0;
+	char *mdata = NULL;
+	int mdatalen = 0;
 	uint32_t alloclen, ilen;
 	int ret;
 
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 378991cfe40..e22de8397b7 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -1284,7 +1284,7 @@ static int jffs2_do_read_inode_internal(struct jffs2_sb_info *c,
 				f->target = NULL;
 				mutex_unlock(&f->sem);
 				jffs2_do_clear_inode(c, f);
-				return -ret;
+				return ret;
 			}
 
 			f->target[je32_to_cpu(latest_node->csize)] = '\0';
diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c
index 6caf1e1ee26..800171dca53 100644
--- a/fs/jffs2/summary.c
+++ b/fs/jffs2/summary.c
@@ -23,7 +23,7 @@
 
 int jffs2_sum_init(struct jffs2_sb_info *c)
 {
-	uint32_t sum_size = max_t(uint32_t, c->sector_size, MAX_SUMMARY_SIZE);
+	uint32_t sum_size = min_t(uint32_t, c->sector_size, MAX_SUMMARY_SIZE);
 
 	c->summary = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
 
diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h
new file mode 100644
index 00000000000..e32aa268efa
--- /dev/null
+++ b/include/linux/kmsg_dump.h
@@ -0,0 +1,60 @@
+/*
+ * linux/include/kmsg_dump.h
+ *
+ * Copyright (C) 2009 Net Insight AB
+ *
+ * Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#ifndef _LINUX_KMSG_DUMP_H
+#define _LINUX_KMSG_DUMP_H
+
+#include <linux/list.h>
+
+enum kmsg_dump_reason {
+	KMSG_DUMP_OOPS,
+	KMSG_DUMP_PANIC,
+};
+
+/**
+ * struct kmsg_dumper - kernel crash message dumper structure
+ * @dump:	The callback which gets called on crashes. The buffer is passed
+ * 		as two sections, where s1 (length l1) contains the older
+ * 		messages and s2 (length l2) contains the newer.
+ * @list:	Entry in the dumper list (private)
+ * @registered:	Flag that specifies if this is already registered
+ */
+struct kmsg_dumper {
+	void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
+			const char *s1, unsigned long l1,
+			const char *s2, unsigned long l2);
+	struct list_head list;
+	int registered;
+};
+
+#ifdef CONFIG_PRINTK
+void kmsg_dump(enum kmsg_dump_reason reason);
+
+int kmsg_dump_register(struct kmsg_dumper *dumper);
+
+int kmsg_dump_unregister(struct kmsg_dumper *dumper);
+#else
+static inline void kmsg_dump(enum kmsg_dump_reason reason)
+{
+}
+
+static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
+{
+	return -EINVAL;
+}
+
+static inline int kmsg_dump_unregister(struct kmsg_dumper *dumper)
+{
+	return -EINVAL;
+}
+#endif
+
+#endif /* _LINUX_KMSG_DUMP_H */
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index fff8c53e543..9c3757c5759 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -19,22 +19,21 @@
 
 /**
  * struct nand_bbt_descr - bad block table descriptor
- * @options:		options for this descriptor
- * @pages:		the page(s) where we find the bbt, used with
- * 			option BBT_ABSPAGE when bbt is searched,
- * 			then we store the found bbts pages here.
- *			Its an array and supports up to 8 chips now
- * @offs:		offset of the pattern in the oob area of the page
- * @veroffs:		offset of the bbt version counter in the oob area of the page
- * @version:		version read from the bbt page during scan
- * @len:		length of the pattern, if 0 no pattern check is performed
- * @maxblocks:		maximum number of blocks to search for a bbt. This
- *			number of blocks is reserved at the end of the device
- *			where the tables are written.
- * @reserved_block_code: if non-0, this pattern denotes a reserved
- *			(rather than bad) block in the stored bbt
- * @pattern:		pattern to identify bad block table or factory marked
- *			good / bad blocks, can be NULL, if len = 0
+ * @options:	options for this descriptor
+ * @pages:	the page(s) where we find the bbt, used with option BBT_ABSPAGE
+ *		when bbt is searched, then we store the found bbts pages here.
+ *		Its an array and supports up to 8 chips now
+ * @offs:	offset of the pattern in the oob area of the page
+ * @veroffs:	offset of the bbt version counter in the oob are of the page
+ * @version:	version read from the bbt page during scan
+ * @len:	length of the pattern, if 0 no pattern check is performed
+ * @maxblocks:	maximum number of blocks to search for a bbt. This number of
+ *		blocks is reserved at the end of the device where the tables are
+ *		written.
+ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
+ *              bad) block in the stored bbt
+ * @pattern:	pattern to identify bad block table or factory marked good /
+ *		bad blocks, can be NULL, if len = 0
  *
  * Descriptor for the bad block table marker and the descriptor for the
  * pattern which identifies good and bad blocks. The assumption is made
@@ -90,7 +89,9 @@ struct nand_bbt_descr {
 /*
  * Constants for oob configuration
  */
-#define ONENAND_BADBLOCK_POS	0
+#define NAND_SMALL_BADBLOCK_POS		5
+#define NAND_LARGE_BADBLOCK_POS		0
+#define ONENAND_BADBLOCK_POS		0
 
 /*
  * Bad block scanning errors
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 88d3d8fbf9f..df89f427523 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -518,10 +518,11 @@ struct cfi_fixup {
 #define CFI_MFR_ANY 0xffff
 #define CFI_ID_ANY  0xffff
 
-#define CFI_MFR_AMD 0x0001
-#define CFI_MFR_ATMEL 0x001F
-#define CFI_MFR_SAMSUNG 0x00EC
-#define CFI_MFR_ST  0x0020 	/* STMicroelectronics */
+#define CFI_MFR_AMD	0x0001
+#define CFI_MFR_INTEL	0x0089
+#define CFI_MFR_ATMEL	0x001F
+#define CFI_MFR_SAMSUNG	0x00EC
+#define CFI_MFR_ST	0x0020 /* STMicroelectronics */
 
 void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups);
 
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index d4f38c5fd44..d0bf422ae37 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -38,6 +38,15 @@ typedef enum {
 	FL_XIP_WHILE_ERASING,
 	FL_XIP_WHILE_WRITING,
 	FL_SHUTDOWN,
+	/* These 2 come from nand_state_t, which has been unified here */
+	FL_READING,
+	FL_CACHEDPRG,
+	/* These 4 come from onenand_state_t, which has been unified here */
+	FL_RESETING,
+	FL_OTPING,
+	FL_PREPARING_ERASE,
+	FL_VERIFYING_ERASE,
+
 	FL_UNKNOWN
 } flstate_t;
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7a232a9bdd6..ccab9dfc521 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -21,6 +21,8 @@
 #include <linux/wait.h>
 #include <linux/spinlock.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/bbm.h>
 
 struct mtd_info;
 /* Scan and identify a NAND device */
@@ -168,7 +170,6 @@ typedef enum {
 /* Chip does not allow subpage writes */
 #define NAND_NO_SUBPAGE_WRITE	0x00000200
 
-
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS \
 	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
@@ -194,6 +195,9 @@ typedef enum {
 /* This option is defined if the board driver allocates its own buffers
    (e.g. because it needs them DMA-coherent */
 #define NAND_OWN_BUFFERS	0x00040000
+/* Chip may not exist, so silence any errors in scan */
+#define NAND_SCAN_SILENT_NODEV	0x00080000
+
 /* Options set by nand scan */
 /* Nand scan has allocated controller struct */
 #define NAND_CONTROLLER_ALLOC	0x80000000
@@ -202,20 +206,6 @@ typedef enum {
 #define NAND_CI_CHIPNR_MSK	0x03
 #define NAND_CI_CELLTYPE_MSK	0x0C
 
-/*
- * nand_state_t - chip states
- * Enumeration for NAND flash chip state
- */
-typedef enum {
-	FL_READY,
-	FL_READING,
-	FL_WRITING,
-	FL_ERASING,
-	FL_SYNCING,
-	FL_CACHEDPRG,
-	FL_PM_SUSPENDED,
-} nand_state_t;
-
 /* Keep gcc happy */
 struct nand_chip;
 
@@ -402,7 +392,7 @@ struct nand_chip {
 	uint8_t		cellinfo;
 	int		badblockpos;
 
-	nand_state_t	state;
+	flstate_t	state;
 
 	uint8_t		*oob_poi;
 	struct nand_hw_control  *controller;
@@ -470,75 +460,6 @@ struct nand_manufacturers {
 extern struct nand_flash_dev nand_flash_ids[];
 extern struct nand_manufacturers nand_manuf_ids[];
 
-/**
- * struct nand_bbt_descr - bad block table descriptor
- * @options:	options for this descriptor
- * @pages:	the page(s) where we find the bbt, used with option BBT_ABSPAGE
- *		when bbt is searched, then we store the found bbts pages here.
- *		Its an array and supports up to 8 chips now
- * @offs:	offset of the pattern in the oob area of the page
- * @veroffs:	offset of the bbt version counter in the oob are of the page
- * @version:	version read from the bbt page during scan
- * @len:	length of the pattern, if 0 no pattern check is performed
- * @maxblocks:	maximum number of blocks to search for a bbt. This number of
- *		blocks is reserved at the end of the device where the tables are
- *		written.
- * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
- *              bad) block in the stored bbt
- * @pattern:	pattern to identify bad block table or factory marked good /
- *		bad blocks, can be NULL, if len = 0
- *
- * Descriptor for the bad block table marker and the descriptor for the
- * pattern which identifies good and bad blocks. The assumption is made
- * that the pattern and the version count are always located in the oob area
- * of the first block.
- */
-struct nand_bbt_descr {
-	int	options;
-	int	pages[NAND_MAX_CHIPS];
-	int	offs;
-	int	veroffs;
-	uint8_t	version[NAND_MAX_CHIPS];
-	int	len;
-	int	maxblocks;
-	int	reserved_block_code;
-	uint8_t	*pattern;
-};
-
-/* Options for the bad block table descriptors */
-
-/* The number of bits used per block in the bbt on the device */
-#define NAND_BBT_NRBITS_MSK	0x0000000F
-#define NAND_BBT_1BIT		0x00000001
-#define NAND_BBT_2BIT		0x00000002
-#define NAND_BBT_4BIT		0x00000004
-#define NAND_BBT_8BIT		0x00000008
-/* The bad block table is in the last good block of the device */
-#define	NAND_BBT_LASTBLOCK	0x00000010
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_ABSPAGE	0x00000020
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_SEARCH		0x00000040
-/* bbt is stored per chip on multichip devices */
-#define NAND_BBT_PERCHIP	0x00000080
-/* bbt has a version counter at offset veroffs */
-#define NAND_BBT_VERSION	0x00000100
-/* Create a bbt if none axists */
-#define NAND_BBT_CREATE		0x00000200
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000400
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00000800
-/* Write bbt if neccecary */
-#define NAND_BBT_WRITE		0x00001000
-/* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT	0x00002000
-/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE	0x00004000
-
-/* The maximum number of blocks to scan for a bbt */
-#define NAND_BBT_SCAN_MAXBLOCKS	4
-
 extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
 extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
 extern int nand_default_bbt(struct mtd_info *mtd);
@@ -548,12 +469,6 @@ extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
 			size_t * retlen, uint8_t * buf);
 
-/*
-* Constants for oob configuration
-*/
-#define NAND_SMALL_BADBLOCK_POS		5
-#define NAND_LARGE_BADBLOCK_POS		0
-
 /**
  * struct platform_nand_chip - chip level device structure
  * @nr_chips:		max. number of chips to scan for
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 052ea8ca243..41bc013571d 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -16,7 +16,13 @@
 struct mtd_info;
 
 /*
- * Calculate 3 byte ECC code for 256 byte block
+ * Calculate 3 byte ECC code for eccsize byte block
+ */
+void __nand_calculate_ecc(const u_char *dat, unsigned int eccsize,
+				u_char *ecc_code);
+
+/*
+ * Calculate 3 byte ECC code for 256/512 byte block
  */
 int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
 
@@ -27,7 +33,7 @@ int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc,
 			unsigned int eccsize);
 
 /*
- * Detect and correct a 1 bit error for 256 byte block
+ * Detect and correct a 1 bit error for 256/512 byte block
  */
 int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
 
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 4e49f335067..5509eb06b32 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -1,7 +1,7 @@
 /*
  *  linux/include/linux/mtd/onenand.h
  *
- *  Copyright (C) 2005-2007 Samsung Electronics
+ *  Copyright © 2005-2009 Samsung Electronics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,6 +14,7 @@
 
 #include <linux/spinlock.h>
 #include <linux/completion.h>
+#include <linux/mtd/flashchip.h>
 #include <linux/mtd/onenand_regs.h>
 #include <linux/mtd/bbm.h>
 
@@ -25,22 +26,6 @@ extern int onenand_scan(struct mtd_info *mtd, int max_chips);
 /* Free resources held by the OneNAND device */
 extern void onenand_release(struct mtd_info *mtd);
 
-/*
- * onenand_state_t - chip states
- * Enumeration for OneNAND flash chip state
- */
-typedef enum {
-	FL_READY,
-	FL_READING,
-	FL_WRITING,
-	FL_ERASING,
-	FL_SYNCING,
-	FL_LOCKING,
-	FL_RESETING,
-	FL_OTPING,
-	FL_PM_SUSPENDED,
-} onenand_state_t;
-
 /**
  * struct onenand_bufferram - OneNAND BufferRAM Data
  * @blockpage:		block & page address in BufferRAM
@@ -137,7 +122,7 @@ struct onenand_chip {
 
 	spinlock_t		chip_lock;
 	wait_queue_head_t	wq;
-	onenand_state_t		state;
+	flstate_t		state;
 	unsigned char		*page_buf;
 	unsigned char		*oob_buf;
 
@@ -152,6 +137,8 @@ struct onenand_chip {
 /*
  * Helper macros
  */
+#define ONENAND_PAGES_PER_BLOCK        (1<<6)
+
 #define ONENAND_CURRENT_BUFFERRAM(this)		(this->bufferram_index)
 #define ONENAND_NEXT_BUFFERRAM(this)		(this->bufferram_index ^ 1)
 #define ONENAND_SET_NEXT_BUFFERRAM(this)	(this->bufferram_index ^= 1)
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index acadbf53a69..cd6f3b43119 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -131,6 +131,8 @@
 #define ONENAND_CMD_LOCK_TIGHT		(0x2C)
 #define ONENAND_CMD_UNLOCK_ALL		(0x27)
 #define ONENAND_CMD_ERASE		(0x94)
+#define ONENAND_CMD_MULTIBLOCK_ERASE	(0x95)
+#define ONENAND_CMD_ERASE_VERIFY	(0x71)
 #define ONENAND_CMD_RESET		(0xF0)
 #define ONENAND_CMD_OTP_ACCESS		(0x65)
 #define ONENAND_CMD_READID		(0x90)
diff --git a/kernel/panic.c b/kernel/panic.c
index 96b45d0b4ba..5827f7b9725 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -10,6 +10,7 @@
  */
 #include <linux/debug_locks.h>
 #include <linux/interrupt.h>
+#include <linux/kmsg_dump.h>
 #include <linux/kallsyms.h>
 #include <linux/notifier.h>
 #include <linux/module.h>
@@ -74,6 +75,7 @@ NORET_TYPE void panic(const char * fmt, ...)
 	dump_stack();
 #endif
 
+	kmsg_dump(KMSG_DUMP_PANIC);
 	/*
 	 * If we have crashed and we have a crash kernel loaded let it handle
 	 * everything else.
@@ -339,6 +341,7 @@ void oops_exit(void)
 {
 	do_oops_enter_exit();
 	print_oops_end_marker();
+	kmsg_dump(KMSG_DUMP_OOPS);
 }
 
 #ifdef WANT_WARN_ON_SLOWPATH
diff --git a/kernel/printk.c b/kernel/printk.c
index b5ac4d99c66..1ded8e7dd19 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -34,6 +34,7 @@
 #include <linux/syscalls.h>
 #include <linux/kexec.h>
 #include <linux/ratelimit.h>
+#include <linux/kmsg_dump.h>
 
 #include <asm/uaccess.h>
 
@@ -1405,4 +1406,122 @@ bool printk_timed_ratelimit(unsigned long *caller_jiffies,
 	return false;
 }
 EXPORT_SYMBOL(printk_timed_ratelimit);
+
+static DEFINE_SPINLOCK(dump_list_lock);
+static LIST_HEAD(dump_list);
+
+/**
+ * kmsg_dump_register - register a kernel log dumper.
+ * @dump: pointer to the kmsg_dumper structure
+ *
+ * Adds a kernel log dumper to the system. The dump callback in the
+ * structure will be called when the kernel oopses or panics and must be
+ * set. Returns zero on success and %-EINVAL or %-EBUSY otherwise.
+ */
+int kmsg_dump_register(struct kmsg_dumper *dumper)
+{
+	unsigned long flags;
+	int err = -EBUSY;
+
+	/* The dump callback needs to be set */
+	if (!dumper->dump)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dump_list_lock, flags);
+	/* Don't allow registering multiple times */
+	if (!dumper->registered) {
+		dumper->registered = 1;
+		list_add_tail(&dumper->list, &dump_list);
+		err = 0;
+	}
+	spin_unlock_irqrestore(&dump_list_lock, flags);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_register);
+
+/**
+ * kmsg_dump_unregister - unregister a kmsg dumper.
+ * @dump: pointer to the kmsg_dumper structure
+ *
+ * Removes a dump device from the system. Returns zero on success and
+ * %-EINVAL otherwise.
+ */
+int kmsg_dump_unregister(struct kmsg_dumper *dumper)
+{
+	unsigned long flags;
+	int err = -EINVAL;
+
+	spin_lock_irqsave(&dump_list_lock, flags);
+	if (dumper->registered) {
+		dumper->registered = 0;
+		list_del(&dumper->list);
+		err = 0;
+	}
+	spin_unlock_irqrestore(&dump_list_lock, flags);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_unregister);
+
+static const char const *kmsg_reasons[] = {
+	[KMSG_DUMP_OOPS]	= "oops",
+	[KMSG_DUMP_PANIC]	= "panic",
+};
+
+static const char *kmsg_to_str(enum kmsg_dump_reason reason)
+{
+	if (reason >= ARRAY_SIZE(kmsg_reasons) || reason < 0)
+		return "unknown";
+
+	return kmsg_reasons[reason];
+}
+
+/**
+ * kmsg_dump - dump kernel log to kernel message dumpers.
+ * @reason: the reason (oops, panic etc) for dumping
+ *
+ * Iterate through each of the dump devices and call the oops/panic
+ * callbacks with the log buffer.
+ */
+void kmsg_dump(enum kmsg_dump_reason reason)
+{
+	unsigned long end;
+	unsigned chars;
+	struct kmsg_dumper *dumper;
+	const char *s1, *s2;
+	unsigned long l1, l2;
+	unsigned long flags;
+
+	/* Theoretically, the log could move on after we do this, but
+	   there's not a lot we can do about that. The new messages
+	   will overwrite the start of what we dump. */
+	spin_lock_irqsave(&logbuf_lock, flags);
+	end = log_end & LOG_BUF_MASK;
+	chars = logged_chars;
+	spin_unlock_irqrestore(&logbuf_lock, flags);
+
+	if (logged_chars > end) {
+		s1 = log_buf + log_buf_len - logged_chars + end;
+		l1 = logged_chars - end;
+
+		s2 = log_buf;
+		l2 = end;
+	} else {
+		s1 = "";
+		l1 = 0;
+
+		s2 = log_buf + end - logged_chars;
+		l2 = logged_chars;
+	}
+
+	if (!spin_trylock_irqsave(&dump_list_lock, flags)) {
+		printk(KERN_ERR "dump_kmsg: dump list lock is held during %s, skipping dump\n",
+				kmsg_to_str(reason));
+		return;
+	}
+	list_for_each_entry(dumper, &dump_list, list)
+		dumper->dump(dumper, reason, s1, l1, s2, l2);
+	spin_unlock_irqrestore(&dump_list_lock, flags);
+}
 #endif
author	Linus Torvalds <torvalds@linux-foundation.org>	2009-12-16 10:23:43 -0800
committer	Linus Torvalds <torvalds@linux-foundation.org>	2009-12-16 10:23:43 -0800
commit	60d9aa758c00f20ade0cb1951f6a934f628dd2d7 (patch)
tree	e3bdfa4ec0d3f9a29a822810b8b9188c7d613cbd
parent	b2adf0cbec4cf0934c63f48f893e0cebde380d0c (diff)
parent	2e16cfca6e17ae37ae21feca080a6f2eca9087dc (diff)