avr32: Allow reserving multiple pins at once

at32_reserve_pin now takes an u32 bitmask rather than a single pin.
This allows to reserve multiple pins at once.

Remove (undocumented) SDCS (pin PE26) from reservation in board
setup code.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

6 files changed, 20 insertions, 58 deletions

diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 5c5cdf3b464..11e7800c163 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -287,23 +287,7 @@ static int __init atstk1002_init(void)
 	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
 	 * SDRAM-specific pins so that nobody messes with them.
 	 */
-	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
-	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
-	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
-	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
-	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
-	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
-	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
-	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
-	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
-	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
-	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
-	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
-	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
-	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
-	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
-	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
-	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
 
 #ifdef CONFIG_BOARD_ATSTK1006
 	smc_set_timing(&nand_config, &nand_timing);
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index 134b566630b..ac31666613a 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -131,23 +131,7 @@ static int __init atstk1003_init(void)
 	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
 	 * SDRAM-specific pins so that nobody messes with them.
 	 */
-	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
-	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
-	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
-	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
-	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
-	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
-	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
-	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
-	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
-	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
-	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
-	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
-	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
-	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
-	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
-	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
-	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
 
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index ff8235a30ec..006a04e8bef 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -307,23 +307,7 @@ static int __init favr32_init(void)
 	 * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific
 	 * pins so that nobody messes with them.
 	 */
-	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
-	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
-	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
-	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
-	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
-	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
-	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
-	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
-	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
-	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
-	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
-	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
-	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
-	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
-	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
-	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
-	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+	at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL);
 
 	at32_select_gpio(GPIO_PIN_PB(3), 0);	/* IRQ from ADS7843 */
 
diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
index a77d372f6f3..5c4c971eed8 100644
--- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
@@ -211,4 +211,7 @@
 
 #define ATMEL_LCDC_ALT_15BIT	(ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA)
 
+/* Bitmask for all EBI data (D16..D31) pins on port E */
+#define ATMEL_EBI_PE_DATA_ALL  (0x0000FFFF)
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
index 21c79373b53..4873024e3b9 100644
--- a/arch/avr32/mach-at32ap/include/mach/portmux.h
+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
@@ -25,6 +25,6 @@ void at32_select_periph(unsigned int port, unsigned int pin,
 			unsigned int periph, unsigned long flags);
 void at32_select_gpio(unsigned int pin, unsigned long flags);
 void at32_deselect_pin(unsigned int pin);
-void at32_reserve_pin(unsigned int pin);
+void at32_reserve_pin(unsigned int port, u32 pin_mask);
 
 #endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index ed81a8bcb22..09a274c9d0b 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -167,22 +167,29 @@ void at32_deselect_pin(unsigned int pin)
 }
 
 /* Reserve a pin, preventing anyone else from changing its configuration. */
-void __init at32_reserve_pin(unsigned int pin)
+void __init at32_reserve_pin(unsigned int port, u32 pin_mask)
 {
 	struct pio_device *pio;
-	unsigned int pin_index = pin & 0x1f;
 
-	pio = gpio_to_pio(pin);
+	/* assign and verify pio */
+	pio = gpio_to_pio(port);
 	if (unlikely(!pio)) {
-		printk("pio: invalid pin %u\n", pin);
+		printk(KERN_WARNING "pio: invalid port %u\n", port);
 		goto fail;
 	}
 
-	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
-		printk("%s: pin %u is busy\n", pio->name, pin_index);
+	/* Test if any of the requested pins is already muxed */
+	spin_lock(&pio_lock);
+	if (unlikely(pio->pinmux_mask & pin_mask)) {
+		printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n",
+		       pio->name, pin_mask, pio->pinmux_mask & pin_mask);
+		spin_unlock(&pio_lock);
 		goto fail;
 	}
 
+	/* Reserve pins */
+	pio->pinmux_mask |= pin_mask;
+	spin_unlock(&pio_lock);
 	return;
 
 fail: