Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux

* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S5PV210: serial: Fix section mismatch warning
  ARM: s3c2410_defconfig: Add new machines
  ARM: s3c6400_defconfig: Add framebuffer and basic LCD
  ARM: s3c6400_defconfig: Add RTC driver support
  ARM: s3c6400_defconfig: Enable USB host side
  ARM: s3c6400_defconfig: Add SPI driver
  ARM: s3c6400_defconfig: Update compiled machines
  ARM: S5P: Regoster clk_xusbxti clock for hsotg driver
  ARM: S3C64XX: Add USB OTG HCLK to the list of clocks
  ARM: SAMSUNG: gpio-cfg.h: update documentation
  ARM: SAMSUNG: Documentation: add documentation on GPIO code
  ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()
  ARM: S3C24XX: Documentation: add section on gpiolib changes
  ARM: S3C24XX: Documentation: update GPIO documentation
  ARM: S3C24XX: Documentation: update documentation overview
  ARM: SAMSUNG: Documentation: update directory layout
  ARM: SAMSUNG: Documentation: update the list of SoCs supported

10 files changed, 594 insertions, 40 deletions

diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 2af2cf39915..816d6071669 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -12,6 +12,8 @@ Introduction
   of the s3c2410 GPIO system, please read the Samsung provided
   data-sheet/users manual to find out the complete list.
 
+  See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
+
 
 GPIOLIB
 -------
@@ -24,8 +26,60 @@ GPIOLIB
   listed below will be removed (they may be marked as __deprecated
   in the near future).
 
-  - s3c2410_gpio_getpin
-  - s3c2410_gpio_setpin
+  The following functions now either have a s3c_ specific variant
+  or are merged into gpiolib. See the definitions in
+  arch/arm/plat-samsung/include/plat/gpio-cfg.h:
+
+  s3c2410_gpio_setpin()		gpio_set_value() or gpio_direction_output()
+  s3c2410_gpio_getpin()		gpio_get_value() or gpio_direction_input()
+  s3c2410_gpio_getirq()		gpio_to_irq()
+  s3c2410_gpio_cfgpin()		s3c_gpio_cfgpin()
+  s3c2410_gpio_getcfg()		s3c_gpio_getcfg()
+  s3c2410_gpio_pullup()		s3c_gpio_setpull()
+
+
+GPIOLIB conversion
+------------------
+
+If you need to convert your board or driver to use gpiolib from the exiting
+s3c2410 api, then here are some notes on the process.
+
+1) If your board is exclusively using an GPIO, say to control peripheral
+   power, then it will require to claim the gpio with gpio_request() before
+   it can use it.
+
+   It is recommended to check the return value, with at least WARN_ON()
+   during initialisation.
+
+2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
+   as they have the same arguments, and can either take the pin specific
+   values, or the more generic special-function-number arguments.
+
+3) s3c2410_gpio_pullup() changs have the problem that whilst the 
+   s3c2410_gpio_pullup(x, 1) can be easily translated to the
+   s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
+   are not so easy.
+
+   The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
+   of some of the devices, a pull-down) and as such the new API distinguishes
+   between the UP and DOWN case. There is currently no 'just turn on' setting
+   which may be required if this becomes a problem.
+
+4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
+   does not implicitly configure the relevant gpio to output. The gpio
+   direction should be changed before using gpio_set_value().
+
+5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
+   has been set to input. It is currently unknown what the behaviour is
+   when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
+   would return the value the pin is supposed to be outputting).
+
+6) s3c2410_gpio_getirq() should be directly replacable with the
+   gpio_to_irq() call.
+
+The s3c2410_gpio and gpio_ calls have always operated on the same gpio
+numberspace, so there is no problem with converting the gpio numbering
+between the calls.
 
 
 Headers
@@ -54,6 +108,11 @@ PIN Numbers
   eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
+  With the conversion to gpiolib, there is no longer a direct conversion
+  from gpio pin number to register base address as in earlier kernels. This
+  is due to the number space required for newer SoCs where the later
+  GPIOs are not contiguous.
+
 
 Configuring a pin
 -----------------
@@ -71,6 +130,8 @@ Configuring a pin
    which would turn GPA(0) into the lowest Address line A0, and set
    GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
+   The s3c_gpio_cfgpin() call is a functional replacement for this call.
+
 
 Reading the current configuration
 ---------------------------------
@@ -82,6 +143,9 @@ Reading the current configuration
   The return value will be from the same set of values which can be
   passed to s3c2410_gpio_cfgpin().
 
+  The s3c_gpio_getcfg() call should be a functional replacement for
+  this call.
+
 
 Configuring a pull-up resistor
 ------------------------------
@@ -95,6 +159,10 @@ Configuring a pull-up resistor
   Where the to value is zero to set the pull-up off, and 1 to enable
   the specified pull-up. Any other values are currently undefined.
 
+  The s3c_gpio_setpull() offers similar functionality, but with the
+  ability to encode whether the pull is up or down. Currently there
+  is no 'just on' state, so up or down must be selected.
+
 
 Getting the state of a PIN
 --------------------------
@@ -106,6 +174,9 @@ Getting the state of a PIN
   This will return either zero or non-zero. Do not count on this
   function returning 1 if the pin is set.
 
+  This call is now implemented by the relevant gpiolib calls, convert
+  your board or driver to use gpiolib.
+
 
 Setting the state of a PIN
 --------------------------
@@ -117,6 +188,9 @@ Setting the state of a PIN
   Which sets the given pin to the value. Use 0 to write 0, and 1 to
   set the output to 1.
 
+  This call is now implemented by the relevant gpiolib calls, convert
+  your board or driver to use gpiolib.
+
 
 Getting the IRQ number associated with a PIN
 --------------------------------------------
@@ -128,6 +202,9 @@ Getting the IRQ number associated with a PIN
 
   Note, not all pins have an IRQ.
 
+  This call is now implemented by the relevant gpiolib calls, convert
+  your board or driver to use gpiolib.
+
 
 Authour
 -------
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 081892df4fd..c12bfc1a00c 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,10 +8,16 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
+  S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
+  are supported.
 
   Support for the S3C2400 and S3C24A0 series are in progress.
 
+  The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
+  included under the arch/arm/mach-s3c2416 directory. Note, whilst core
+  support for these SoCs is in, work on some of the extra peripherals
+  and extra interrupts is still ongoing.
+
 
 Configuration
 -------------
@@ -209,6 +215,13 @@ GPIO
   Newer kernels carry GPIOLIB, and support is being moved towards
   this with some of the older support in line to be removed.
 
+  As of v2.6.34, the move towards using gpiolib support is almost
+  complete, and very little of the old calls are left.
+
+  See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
+  support and Documentation/arm/Samsung/GPIO.txt for the core Samsung
+  implementation.
+
 
 Clock Management
 ----------------
diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt
new file mode 100644
index 00000000000..05850c62abe
--- /dev/null
+++ b/Documentation/arm/Samsung/GPIO.txt
@@ -0,0 +1,42 @@
+		Samsung GPIO implementation
+		===========================
+
+Introduction
+------------
+
+This outlines the Samsung GPIO implementation and the architecture
+specfic calls provided alongisde the drivers/gpio core.
+
+
+S3C24XX (Legacy)
+----------------
+
+See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
+about these devices. Their implementation is being brought into line
+with the core samsung implementation described in this document.
+
+
+GPIOLIB integration
+-------------------
+
+The gpio implementation uses gpiolib as much as possible, only providing
+specific calls for the items that require Samsung specific handling, such
+as pin special-function or pull resistor control.
+
+GPIO numbering is synchronised between the Samsung and gpiolib system.
+
+
+PIN configuration
+-----------------
+
+Pin configuration is specific to the Samsung architecutre, with each SoC
+registering the necessary information for the core gpio configuration
+implementation to configure pins as necessary.
+
+The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
+driver or machine to change gpio configuration.
+
+See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
+on these functions.
+
+
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
index 7cced1fea9c..c3094ea51aa 100644
--- a/Documentation/arm/Samsung/Overview.txt
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -13,9 +13,10 @@ Introduction
 
   - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
   - S3C64XX: S3C6400 and S3C6410
-  - S5PC6440
-
-  S5PC100 and S5PC110 support is currently being merged
+  - S5P6440
+  - S5P6442
+  - S5PC100
+  - S5PC110 / S5PV210
 
 
 S3C24XX Systems
@@ -35,7 +36,10 @@ Configuration
   unifying all the SoCs into one kernel.
 
   s5p6440_defconfig - S5P6440 specific default configuration
+  s5p6442_defconfig - S5P6442 specific default configuration
   s5pc100_defconfig - S5PC100 specific default configuration
+  s5pc110_defconfig - S5PC110 specific default configuration
+  s5pv210_defconfig - S5PV210 specific default configuration
 
 
 Layout
@@ -50,18 +54,27 @@ Layout
   specific information. It contains the base clock, GPIO and device definitions
   to get the system running.
 
-  plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
-  involved in other builds this will be phased out once the relevant code is
-  moved elsewhere.
-
   plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
 
-  plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
+  plat-s5p is for s5p specific builds, and contains common support for the
+  S5P specific systems. Not all S5Ps use all the features in this directory
+  due to differences in the hardware.
+
+
+Layout changes
+--------------
+
+  The old plat-s3c and plat-s5pc1xx directories have been removed, with
+  support moved to either plat-samsung or plat-s5p as necessary. These moves
+  where to simplify the include and dependency issues involved with having
+  so many different platform directories.
 
-  plat-s5p is for s5p specific builds, more to be added.
+  It was decided to remove plat-s5pc1xx as some of the support was already
+  in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
+  the only user was the S5PC100. The S5PC100 specific items where moved to
+  arch/arm/mach-s5pc100.
 
 
-  [ to finish ]
 
 
 Port Contributors
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 43af89c027d..44cea2ddd22 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.34
-# Wed May 26 19:04:29 2010
+# Fri May 28 19:15:48 2010
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -250,12 +250,15 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_SAMSUNG_CLKSRC=y
 CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
 CONFIG_S3C_GPIO_PULL_UP=y
 CONFIG_SAMSUNG_GPIO_EXTRA=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_ADC=y
 CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
 CONFIG_S3C_DEV_HWMON=y
+CONFIG_S3C_DEV_FB=y
 CONFIG_S3C_DEV_USB_HOST=y
 CONFIG_S3C_DEV_WDT=y
 CONFIG_S3C_DEV_NAND=y
@@ -322,11 +325,13 @@ CONFIG_MACH_SMDK2413=y
 CONFIG_MACH_S3C2413=y
 CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
+CONFIG_CPU_S3C2416=y
+CONFIG_S3C2416_DMA=y
 
 #
 # S3C2416 Machines
 #
-# CONFIG_MACH_SMDK2416 is not set
+CONFIG_MACH_SMDK2416=y
 CONFIG_CPU_S3C2440=y
 CONFIG_CPU_S3C2442=y
 CONFIG_CPU_S3C244X=y
@@ -338,9 +343,9 @@ CONFIG_S3C2440_DMA=y
 # S3C2440 and S3C2442 Machines
 #
 CONFIG_MACH_ANUBIS=y
-# CONFIG_MACH_NEO1973_GTA02 is not set
+CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_OSIRIS=y
-# CONFIG_MACH_OSIRIS_DVS is not set
+CONFIG_MACH_OSIRIS_DVS=m
 CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
@@ -348,7 +353,7 @@ CONFIG_SMDK2440_CPU2440=y
 CONFIG_SMDK2440_CPU2442=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_MACH_MINI2440=y
-# CONFIG_MACH_RX1950 is not set
+CONFIG_MACH_RX1950=y
 CONFIG_CPU_S3C2443=y
 CONFIG_S3C2443_DMA=y
 
@@ -1302,6 +1307,7 @@ CONFIG_INPUT_POWERMATE=m
 CONFIG_INPUT_YEALINK=m
 CONFIG_INPUT_CM109=m
 CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_PCF50633_PMU is not set
 # CONFIG_INPUT_PCF8574 is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 
@@ -1490,7 +1496,16 @@ CONFIG_GPIOLIB=y
 # AC97 GPIO expanders:
 #
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_CHARGER_PCF50633 is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -1607,7 +1622,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_I2CPLD is not set
 # CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+CONFIG_TPS65010=m
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
@@ -1620,8 +1635,10 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
+CONFIG_MFD_PCF50633=y
 # CONFIG_MFD_MC13783 is not set
+# CONFIG_PCF50633_ADC is not set
+CONFIG_PCF50633_GPIO=y
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_AB4500_CORE is not set
@@ -1737,6 +1754,7 @@ CONFIG_SND_S3C24XX_SOC_I2S=y
 CONFIG_SND_S3C_I2SV2_SOC=m
 CONFIG_SND_S3C2412_SOC_I2S=m
 CONFIG_SND_S3C_SOC_AC97=m
+# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set
 CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
 CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
 CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
@@ -2045,6 +2063,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_PCF50633 is not set
 
 #
 # on-CPU RTC drivers
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 7d8b4cf3858..2b642386f03 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.34
-# Wed May 26 19:04:30 2010
+# Fri May 28 19:05:39 2010
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
@@ -253,12 +254,15 @@ CONFIG_S3C_GPIO_TRACK=y
 # CONFIG_S3C_ADC is not set
 CONFIG_S3C_DEV_HSMMC=y
 CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_HSMMC2=y
+CONFIG_S3C_DEV_HWMON=y
 CONFIG_S3C_DEV_I2C1=y
 CONFIG_S3C_DEV_FB=y
 CONFIG_S3C_DEV_USB_HOST=y
 CONFIG_S3C_DEV_USB_HSOTG=y
 CONFIG_S3C_DEV_WDT=y
 CONFIG_S3C_DEV_NAND=y
+CONFIG_S3C_DEV_RTC=y
 CONFIG_SAMSUNG_DEV_ADC=y
 CONFIG_SAMSUNG_DEV_TS=y
 CONFIG_S3C_DMA=y
@@ -271,6 +275,7 @@ CONFIG_S3C_DMA=y
 # CONFIG_SAMSUNG_PM_CHECK is not set
 CONFIG_SAMSUNG_WAKEMASK=y
 CONFIG_PLAT_S3C64XX=y
+CONFIG_CPU_S3C6400=y
 CONFIG_CPU_S3C6410=y
 CONFIG_S3C64XX_DMA=y
 CONFIG_S3C64XX_SETUP_SDHCI=y
@@ -278,17 +283,18 @@ CONFIG_S3C64XX_SETUP_I2C0=y
 CONFIG_S3C64XX_SETUP_I2C1=y
 CONFIG_S3C64XX_SETUP_FB_24BPP=y
 CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
-# CONFIG_MACH_SMDK6400 is not set
-# CONFIG_MACH_ANW6410 is not set
+CONFIG_MACH_SMDK6400=y
+CONFIG_MACH_ANW6410=y
 CONFIG_MACH_SMDK6410=y
 CONFIG_SMDK6410_SD_CH0=y
 # CONFIG_SMDK6410_SD_CH1 is not set
 # CONFIG_SMDK6410_WM1190_EV1 is not set
 # CONFIG_SMDK6410_WM1192_EV1 is not set
-# CONFIG_MACH_NCP is not set
-# CONFIG_MACH_HMT is not set
-# CONFIG_MACH_SMARTQ5 is not set
-# CONFIG_MACH_SMARTQ7 is not set
+CONFIG_MACH_NCP=y
+CONFIG_MACH_HMT=y
+CONFIG_MACH_SMARTQ=y
+CONFIG_MACH_SMARTQ5=y
+CONFIG_MACH_SMARTQ7=y
 
 #
 # Processor Type
@@ -475,6 +481,9 @@ CONFIG_MTD_CFI_I2=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -501,6 +510,7 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -521,6 +531,7 @@ CONFIG_BLK_DEV_LOOP=y
 #
 # DRBD disabled because PROC_FS, INET or CONNECTOR not selected
 #
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -534,12 +545,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ISL29003 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
 # EEPROM support
 #
 CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
@@ -654,6 +667,7 @@ CONFIG_SERIAL_SAMSUNG_UARTS=4
 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_S3C6400=y
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_TIMBERDALE is not set
@@ -694,6 +708,7 @@ CONFIG_I2C_S3C2410=y
 #
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Other I2C/SMBus bus drivers
@@ -703,7 +718,24 @@ CONFIG_I2C_S3C2410=y
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_S3C64XX=m
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 
 #
 # PPS support
@@ -735,6 +767,9 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
 
 #
 # AC97 GPIO expanders:
@@ -750,6 +785,7 @@ CONFIG_HWMON=y
 #
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -771,6 +807,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
@@ -785,6 +822,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -796,6 +834,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
 # CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
@@ -809,6 +848,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
@@ -845,7 +885,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -854,8 +897,47 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C=y
+# CONFIG_FB_S3C_DEBUG_REGWRITE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_PWM=y
 
 #
 # Display device support
@@ -867,6 +949,8 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
 CONFIG_SOUND_OSS_CORE_PRECLAIM=y
@@ -895,6 +979,11 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_S3C24XX_SOC=m
@@ -909,29 +998,197 @@ CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
 # CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EGALAX is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
-# Enable Host or Gadget support to see Inventra options
+# Miscellaneous USB options
 #
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
 # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -951,11 +1208,77 @@ CONFIG_MMC_SDHCI=y
 # CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_SDHCI_S3C=y
 # CONFIG_MMC_SDHCI_S3C_DMA is not set
+# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
@@ -1052,7 +1375,46 @@ CONFIG_ROMFS_ON_BLOCK=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 
 #
 # Kernel hacking
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 7a4138beb66..fbd85a9b7bb 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -259,6 +259,12 @@ static struct clk init_clocks[] = {
 		.enable		= s3c64xx_hclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
 	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_USB,
+	}, {
 		.name		= "timers",
 		.id		= -1,
 		.parent		= &clk_p,
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 24a931fd8d3..b5e255265f2 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -148,6 +148,7 @@ static struct clk *s5p_clks[] __initdata = {
 	&clk_fout_vpll,
 	&clk_arm,
 	&clk_vpll,
+	&clk_xusbxti,
 };
 
 void __init s5p_register_clocks(unsigned long xtal_freq)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 34efdd2b032..db4112c6f2b 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -43,6 +43,11 @@ struct s3c_gpio_chip;
  * layouts. Provide an point to vector control routine and provide any
  * per-bank configuration information that other systems such as the
  * external interrupt code will need.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
  */
 struct s3c_gpio_cfg {
 	unsigned int	cfg_eint;
@@ -70,11 +75,25 @@ struct s3c_gpio_cfg {
 /**
  * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
  * @pin pin The pin number to configure.
- * @pin to The configuration for the pin's function.
+ * @to to The configuration for the pin's function.
  *
  * Configure which function is actually connected to the external
  * pin, such as an gpio input, output or some form of special function
  * connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ *	for (gpio = start; gpio < end; gpio++)
+ *		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
  */
 extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
 
@@ -108,6 +127,8 @@ extern unsigned s3c_gpio_getcfg(unsigned int pin);
  * This function sets the state of the pull-{up,down} resistor for the
  * specified pin. It will return 0 if successfull, or a negative error
  * code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
 */
 extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
 
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
index 8dc03837617..4a789e5361a 100644
--- a/drivers/serial/s5pv210.c
+++ b/drivers/serial/s5pv210.c
@@ -119,7 +119,7 @@ static int s5p_serial_probe(struct platform_device *pdev)
 	return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
 }
 
-static struct platform_driver s5p_serial_drv = {
+static struct platform_driver s5p_serial_driver = {
 	.probe		= s5p_serial_probe,
 	.remove		= __devexit_p(s3c24xx_serial_remove),
 	.driver		= {
@@ -130,19 +130,19 @@ static struct platform_driver s5p_serial_drv = {
 
 static int __init s5pv210_serial_console_init(void)
 {
-	return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+	return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf);
 }
 
 console_initcall(s5pv210_serial_console_init);
 
 static int __init s5p_serial_init(void)
 {
-	return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+	return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
 }
 
 static void __exit s5p_serial_exit(void)
 {
-	platform_driver_unregister(&s5p_serial_drv);
+	platform_driver_unregister(&s5p_serial_driver);
 }
 
 module_init(s5p_serial_init);