[PATCH] driver model wakeup flags

This is a refresh of an earlier patch to add "wakeup" support to the
PM core model.  This provides per-device bus-neutral control of the
use of wakeup events.

  * "struct device_pm_info" has two bits that are initialized as
    part of setting up the enclosing struct device:
      - "can_wakeup", reflecting hardware capabilities
      - "may_wakeup", the policy setting (when CONFIG_PM)

  * There's a writeable sysfs "wakeup" file, with one of two values:
      - "enabled", when the policy is to allow wakeup
      - "disabled", when the policy is not to allow it
      - "" if the device can't currently issue wakeups

By default, wakeup is enabled on all devices that support it.  If its
driver doesn't support it ... treat it as a bug.  :)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 99 insertions, 1 deletions

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 6ab73f5c799..31109193e2c 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -225,6 +225,7 @@ void device_initialize(struct device *dev)
 		   klist_children_put);
 	INIT_LIST_HEAD(&dev->dma_pools);
 	init_MUTEX(&dev->sem);
+	device_init_wakeup(dev, 0);
 }
 
 /**
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 8d04fb435c1..89c57875f3e 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -48,8 +48,81 @@ static ssize_t state_store(struct device * dev, struct device_attribute *attr, c
 static DEVICE_ATTR(state, 0644, state_show, state_store);
 
 
+/*
+ *	wakeup - Report/change current wakeup option for device
+ *
+ *	Some devices support "wakeup" events, which are hardware signals
+ *	used to activate devices from suspended or low power states.  Such
+ *	devices have one of three values for the sysfs power/wakeup file:
+ *
+ *	 + "enabled\n" to issue the events;
+ *	 + "disabled\n" not to do so; or
+ *	 + "\n" for temporary or permanent inability to issue wakeup.
+ *
+ *	(For example, unconfigured USB devices can't issue wakeups.)
+ *
+ *	Familiar examples of devices that can issue wakeup events include
+ *	keyboards and mice (both PS2 and USB styles), power buttons, modems,
+ *	"Wake-On-LAN" Ethernet links, GPIO lines, and more.  Some events
+ *	will wake the entire system from a suspend state; others may just
+ *	wake up the device (if the system as a whole is already active).
+ *	Some wakeup events use normal IRQ lines; other use special out
+ *	of band signaling.
+ *
+ *	It is the responsibility of device drivers to enable (or disable)
+ *	wakeup signaling as part of changing device power states, respecting
+ *	the policy choices provided through the driver model.
+ *
+ *	Devices may not be able to generate wakeup events from all power
+ *	states.  Also, the events may be ignored in some configurations;
+ *	for example, they might need help from other devices that aren't
+ *	active, or which may have wakeup disabled.  Some drivers rely on
+ *	wakeup events internally (unless they are disabled), keeping
+ *	their hardware in low power modes whenever they're unused.  This
+ *	saves runtime power, without requiring system-wide sleep states.
+ */
+
+static const char enabled[] = "enabled";
+static const char disabled[] = "disabled";
+
+static ssize_t
+wake_show(struct device * dev, struct device_attribute *attr, char * buf)
+{
+	return sprintf(buf, "%s\n", device_can_wakeup(dev)
+		? (device_may_wakeup(dev) ? enabled : disabled)
+		: "");
+}
+
+static ssize_t
+wake_store(struct device * dev, struct device_attribute *attr,
+	const char * buf, size_t n)
+{
+	char *cp;
+	int len = n;
+
+	if (!device_can_wakeup(dev))
+		return -EINVAL;
+
+	cp = memchr(buf, '\n', n);
+	if (cp)
+		len = cp - buf;
+	if (len == sizeof enabled - 1
+			&& strncmp(buf, enabled, sizeof enabled - 1) == 0)
+		device_set_wakeup_enable(dev, 1);
+	else if (len == sizeof disabled - 1
+			&& strncmp(buf, disabled, sizeof disabled - 1) == 0)
+		device_set_wakeup_enable(dev, 0);
+	else
+		return -EINVAL;
+	return n;
+}
+
+static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
+
+
 static struct attribute * power_attrs[] = {
 	&dev_attr_state.attr,
+	&dev_attr_wakeup.attr,
 	NULL,
 };
 static struct attribute_group pm_attr_group = {
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 5cfb07648ec..7897cf500c5 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -219,7 +219,9 @@ typedef struct pm_message {
 
 struct dev_pm_info {
 	pm_message_t		power_state;
+	unsigned		can_wakeup:1;
 #ifdef	CONFIG_PM
+	unsigned		should_wakeup:1;
 	pm_message_t		prev_state;
 	void			* saved_state;
 	atomic_t		pm_users;
@@ -236,13 +238,35 @@ extern void device_resume(void);
 
 #ifdef CONFIG_PM
 extern int device_suspend(pm_message_t state);
-#else
+
+#define device_set_wakeup_enable(dev,val) \
+	((dev)->power.should_wakeup = !!(val))
+#define device_may_wakeup(dev) \
+	(device_can_wakeup(dev) && (dev)->power.should_wakeup)
+
+#else /* !CONFIG_PM */
+
 static inline int device_suspend(pm_message_t state)
 {
 	return 0;
 }
+
+#define device_set_wakeup_enable(dev,val)	do{}while(0)
+#define device_may_wakeup(dev)			(0)
+
 #endif
 
+/* changes to device_may_wakeup take effect on the next pm state change.
+ * by default, devices should wakeup if they can.
+ */
+#define device_can_wakeup(dev) \
+	((dev)->power.can_wakeup)
+#define device_init_wakeup(dev,val) \
+	do { \
+		device_can_wakeup(dev) = !!(val); \
+		device_set_wakeup_enable(dev,val); \
+	} while(0)
+
 #endif /* __KERNEL__ */
 
 #endif /* _LINUX_PM_H */