[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()

1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common
   information of the designated SSP port.

2. remove those IRQ/memory request code, ssp_request() has done that for
   the driver

3. the SPI platform device is thus made psuedo, no resource (memory/IRQ)
   has to be defined, all will be retreived by ssp_request()

4. introduce ssp_get_clk_div() to handle controller difference in clock
   divisor setting

5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to
   handle the different SSP clock frequency between different processors

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 53 insertions, 127 deletions

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1d3112dc629..ebb73f13348 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -206,30 +206,13 @@ static struct resource smc91x_resources[] = {
  * (to J5) and poking board registers (as done below).  Else it's only useful
  * for the temperature sensors.
  */
-static struct resource pxa_ssp_resources[] = {
-	[0] = {
-		.start	= __PREG(SSCR0_P(1)),
-		.end	= __PREG(SSCR0_P(1)) + 0x14,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP,
-		.end	= IRQ_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.ssp_type	= PXA25x_SSP,
-	.clock_enable	= CKEN_SSP,
 	.num_chipselect	= 0,
 };
 
 static struct platform_device pxa_ssp = {
 	.name		= "pxa2xx-spi",
 	.id		= 1,
-	.resource	= pxa_ssp_resources,
-	.num_resources	= ARRAY_SIZE(pxa_ssp_resources),
 	.dev = {
 		.platform_data	= &pxa_ssp_master_info,
 	},
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index abf05048c63..aaaea81e412 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -153,6 +153,7 @@ config SPI_OMAP24XX
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
 	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+	select PXA_SSP
 	help
 	  This enables using a PXA2xx SSP port as a SPI master controller.
 	  The driver can be configured to use any SSP port and additional
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 0ac0f65f69a..eb817b8eb02 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -27,6 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -37,6 +38,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/regs-ssp.h>
+#include <asm/arch/ssp.h>
 #include <asm/arch/pxa2xx_spi.h>
 
 MODULE_AUTHOR("Stephen Street");
@@ -81,6 +83,9 @@ struct driver_data {
 	/* Driver model hookup */
 	struct platform_device *pdev;
 
+	/* SSP Info */
+	struct ssp_device *ssp;
+
 	/* SPI framework hookup */
 	enum pxa_ssp_type ssp_type;
 	struct spi_master *master;
@@ -779,6 +784,16 @@ int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi,
 	return retval;
 }
 
+static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
+{
+	unsigned long ssp_clk = clk_get_rate(ssp->clk);
+
+	if (ssp->type == PXA25x_SSP)
+		return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
+	else
+		return ((ssp_clk / rate - 1) & 0xfff) << 8;
+}
+
 static void pump_transfers(unsigned long data)
 {
 	struct driver_data *drv_data = (struct driver_data *)data;
@@ -786,6 +801,7 @@ static void pump_transfers(unsigned long data)
 	struct spi_transfer *transfer = NULL;
 	struct spi_transfer *previous = NULL;
 	struct chip_data *chip = NULL;
+	struct ssp_device *ssp = drv_data->ssp;
 	void *reg = drv_data->ioaddr;
 	u32 clk_div = 0;
 	u8 bits = 0;
@@ -867,12 +883,7 @@ static void pump_transfers(unsigned long data)
 		if (transfer->bits_per_word)
 			bits = transfer->bits_per_word;
 
-		if (reg == SSP1_VIRT)
-			clk_div = SSP1_SerClkDiv(speed);
-		else if (reg == SSP2_VIRT)
-			clk_div = SSP2_SerClkDiv(speed);
-		else if (reg == SSP3_VIRT)
-			clk_div = SSP3_SerClkDiv(speed);
+		clk_div = ssp_get_clk_div(ssp, speed);
 
 		if (bits <= 8) {
 			drv_data->n_bytes = 1;
@@ -1075,6 +1086,7 @@ static int setup(struct spi_device *spi)
 	struct pxa2xx_spi_chip *chip_info = NULL;
 	struct chip_data *chip;
 	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	struct ssp_device *ssp = drv_data->ssp;
 	unsigned int clk_div;
 
 	if (!spi->bits_per_word)
@@ -1158,18 +1170,7 @@ static int setup(struct spi_device *spi)
 		}
 	}
 
-	if (drv_data->ioaddr == SSP1_VIRT)
-		clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
-	else if (drv_data->ioaddr == SSP2_VIRT)
-		clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
-	else if (drv_data->ioaddr == SSP3_VIRT)
-		clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
-	else
-	{
-		dev_err(&spi->dev, "failed setup: unknown IO address=0x%p\n",
-			drv_data->ioaddr);
-		return -ENODEV;
-	}
+	clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
 	chip->speed_hz = spi->max_speed_hz;
 
 	chip->cr0 = clk_div
@@ -1184,15 +1185,15 @@ static int setup(struct spi_device *spi)
 
 	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
 	if (drv_data->ssp_type != PXA25x_SSP)
-		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+		dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
 				spi->bits_per_word,
-				(CLOCK_SPEED_HZ)
+				clk_get_rate(ssp->clk)
 					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
 				spi->mode & 0x3);
 	else
-		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+		dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n",
 				spi->bits_per_word,
-				(CLOCK_SPEED_HZ/2)
+				clk_get_rate(ssp->clk)
 					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
 				spi->mode & 0x3);
 
@@ -1324,14 +1325,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 	struct pxa2xx_spi_master *platform_info;
 	struct spi_master *master;
 	struct driver_data *drv_data = 0;
-	struct resource *memory_resource;
-	int irq;
+	struct ssp_device *ssp;
 	int status = 0;
 
 	platform_info = dev->platform_data;
 
-	if (platform_info->ssp_type == SSP_UNDEFINED) {
-		dev_err(&pdev->dev, "undefined SSP\n");
+	ssp = ssp_request(pdev->id, pdev->name);
+	if (ssp == NULL) {
+		dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
 		return -ENODEV;
 	}
 
@@ -1339,12 +1340,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 	master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
 	if (!master) {
 		dev_err(&pdev->dev, "can not alloc spi_master\n");
+		ssp_free(ssp);
 		return -ENOMEM;
 	}
 	drv_data = spi_master_get_devdata(master);
 	drv_data->master = master;
 	drv_data->master_info = platform_info;
 	drv_data->pdev = pdev;
+	drv_data->ssp = ssp;
 
 	master->bus_num = pdev->id;
 	master->num_chipselect = platform_info->num_chipselect;
@@ -1352,21 +1355,13 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 	master->setup = setup;
 	master->transfer = transfer;
 
-	drv_data->ssp_type = platform_info->ssp_type;
+	drv_data->ssp_type = ssp->type;
 	drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
 						sizeof(struct driver_data)), 8);
 
-	/* Setup register addresses */
-	memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!memory_resource) {
-		dev_err(&pdev->dev, "memory resources not defined\n");
-		status = -ENODEV;
-		goto out_error_master_alloc;
-	}
-
-	drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
-	drv_data->ssdr_physical = memory_resource->start + 0x00000010;
-	if (platform_info->ssp_type == PXA25x_SSP) {
+	drv_data->ioaddr = ssp->mmio_base;
+	drv_data->ssdr_physical = ssp->phys_base + SSDR;
+	if (ssp->type == PXA25x_SSP) {
 		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
 		drv_data->dma_cr1 = 0;
 		drv_data->clear_sr = SSSR_ROR;
@@ -1378,15 +1373,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 		drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
 	}
 
-	/* Attach to IRQ */
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "irq resource not defined\n");
-		status = -ENODEV;
-		goto out_error_master_alloc;
-	}
-
-	status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
+	status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data);
 	if (status < 0) {
 		dev_err(&pdev->dev, "can not get IRQ\n");
 		goto out_error_master_alloc;
@@ -1419,29 +1406,12 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 			goto out_error_dma_alloc;
 		}
 
-		if (drv_data->ioaddr == SSP1_VIRT) {
-				DRCMRRXSSDR = DRCMR_MAPVLD
-						| drv_data->rx_channel;
-				DRCMRTXSSDR = DRCMR_MAPVLD
-						| drv_data->tx_channel;
-		} else if (drv_data->ioaddr == SSP2_VIRT) {
-				DRCMRRXSS2DR = DRCMR_MAPVLD
-						| drv_data->rx_channel;
-				DRCMRTXSS2DR = DRCMR_MAPVLD
-						| drv_data->tx_channel;
-		} else if (drv_data->ioaddr == SSP3_VIRT) {
-				DRCMRRXSS3DR = DRCMR_MAPVLD
-						| drv_data->rx_channel;
-				DRCMRTXSS3DR = DRCMR_MAPVLD
-						| drv_data->tx_channel;
-		} else {
-			dev_err(dev, "bad SSP type\n");
-			goto out_error_dma_alloc;
-		}
+		DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
+		DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
 	}
 
 	/* Enable SOC clock */
-	pxa_set_cken(platform_info->clock_enable, 1);
+	clk_enable(ssp->clk);
 
 	/* Load default SSP configuration */
 	write_SSCR0(0, drv_data->ioaddr);
@@ -1480,7 +1450,7 @@ out_error_queue_alloc:
 	destroy_queue(drv_data);
 
 out_error_clock_enabled:
-	pxa_set_cken(platform_info->clock_enable, 0);
+	clk_disable(ssp->clk);
 
 out_error_dma_alloc:
 	if (drv_data->tx_channel != -1)
@@ -1489,17 +1459,18 @@ out_error_dma_alloc:
 		pxa_free_dma(drv_data->rx_channel);
 
 out_error_irq_alloc:
-	free_irq(irq, drv_data);
+	free_irq(ssp->irq, drv_data);
 
 out_error_master_alloc:
 	spi_master_put(master);
+	ssp_free(ssp);
 	return status;
 }
 
 static int pxa2xx_spi_remove(struct platform_device *pdev)
 {
 	struct driver_data *drv_data = platform_get_drvdata(pdev);
-	int irq;
+	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
 	if (!drv_data)
@@ -1521,28 +1492,21 @@ static int pxa2xx_spi_remove(struct platform_device *pdev)
 
 	/* Disable the SSP at the peripheral and SOC level */
 	write_SSCR0(0, drv_data->ioaddr);
-	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+	clk_disable(ssp->clk);
 
 	/* Release DMA */
 	if (drv_data->master_info->enable_dma) {
-		if (drv_data->ioaddr == SSP1_VIRT) {
-			DRCMRRXSSDR = 0;
-			DRCMRTXSSDR = 0;
-		} else if (drv_data->ioaddr == SSP2_VIRT) {
-			DRCMRRXSS2DR = 0;
-			DRCMRTXSS2DR = 0;
-		} else if (drv_data->ioaddr == SSP3_VIRT) {
-			DRCMRRXSS3DR = 0;
-			DRCMRTXSS3DR = 0;
-		}
+		DRCMR(ssp->drcmr_rx) = 0;
+		DRCMR(ssp->drcmr_tx) = 0;
 		pxa_free_dma(drv_data->tx_channel);
 		pxa_free_dma(drv_data->rx_channel);
 	}
 
 	/* Release IRQ */
-	irq = platform_get_irq(pdev, 0);
-	if (irq >= 0)
-		free_irq(irq, drv_data);
+	free_irq(ssp->irq, drv_data);
+
+	/* Release SSP */
+	ssp_free(ssp);
 
 	/* Disconnect from the SPI framework */
 	spi_unregister_master(drv_data->master);
@@ -1577,6 +1541,7 @@ static int suspend_devices(struct device *dev, void *pm_message)
 static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
 	/* Check all childern for current power state */
@@ -1589,7 +1554,7 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
 	if (status != 0)
 		return status;
 	write_SSCR0(0, drv_data->ioaddr);
-	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+	clk_disable(ssp->clk);
 
 	return 0;
 }
@@ -1597,10 +1562,11 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
 static int pxa2xx_spi_resume(struct platform_device *pdev)
 {
 	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
 	/* Enable the SSP clock */
-	pxa_set_cken(drv_data->master_info->clock_enable, 1);
+	clk_disable(ssp->clk);
 
 	/* Start the queue running */
 	status = start_queue(drv_data);
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h
index acc7ec7a84a..3459fb26ce9 100644
--- a/include/asm-arm/arch-pxa/pxa2xx_spi.h
+++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h
@@ -22,32 +22,8 @@
 #define PXA2XX_CS_ASSERT (0x01)
 #define PXA2XX_CS_DEASSERT (0x02)
 
-#if defined(CONFIG_PXA25x)
-#define CLOCK_SPEED_HZ 3686400
-#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00)
-#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#elif defined(CONFIG_PXA27x)
-#define CLOCK_SPEED_HZ 13000000
-#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#endif
-
-#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1)))))
-#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2)))))
-#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3)))))
-
-enum pxa_ssp_type {
-	SSP_UNDEFINED = 0,
-	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
-	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
-	PXA27x_SSP,
-};
-
 /* device.platform_data for SSP controller devices */
 struct pxa2xx_spi_master {
-	enum pxa_ssp_type ssp_type;
 	u32 clock_enable;
 	u16 num_chipselect;
 	u8 enable_dma;