diff options
author | Linus Torvalds <torvalds@woody.osdl.org> | 2006-12-11 12:22:58 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.osdl.org> | 2006-12-11 12:22:58 -0800 |
commit | 116140b7f5c9182c86a4e419f81684209357aea7 (patch) | |
tree | 596e6d1a3121c022afd1bf29637b6bc6bb06d086 | |
parent | 8d610dd52dd1da696e199e4b4545f33a2a5de5c6 (diff) | |
parent | 8af905b4a403ce74b8d907b50bccc453a58834bc (diff) |
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
[PATCH] smc91x: Kill off excessive versatile hooks.
[PATCH] myri10ge: update driver version to 1.1.0
[PATCH] myri10ge: fix big_bytes in case of vlan frames
[PATCH] myri10ge: Full vlan frame in small_bytes
[PATCH] myri10ge: drop contiguous skb routines
[PATCH] myri10ge: switch to page-based skb
[PATCH] myri10ge: add page-based skb routines
[PATCH] myri10ge: indentation cleanups
[PATCH] chelsio: working NAPI
[PATCH] MACB: Use __raw register access
[PATCH] MACB: Use struct delayed_work instead of struct work_struct
[PATCH] ucc_geth: Initialize mdio_lock.
[PATCH] ucc_geth: compilation error fixes
-rw-r--r-- | drivers/net/Kconfig | 8 | ||||
-rw-r--r-- | drivers/net/chelsio/cxgb2.c | 23 | ||||
-rw-r--r-- | drivers/net/chelsio/sge.c | 115 | ||||
-rw-r--r-- | drivers/net/chelsio/sge.h | 4 | ||||
-rw-r--r-- | drivers/net/macb.c | 8 | ||||
-rw-r--r-- | drivers/net/macb.h | 6 | ||||
-rw-r--r-- | drivers/net/myri10ge/myri10ge.c | 498 | ||||
-rw-r--r-- | drivers/net/smc91x.h | 90 | ||||
-rw-r--r-- | drivers/net/ucc_geth.c | 12 |
9 files changed, 334 insertions, 430 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9de0eed6755..8aa8dd02b91 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2384,6 +2384,14 @@ config CHELSIO_T1_1G Enables support for Chelsio's gigabit Ethernet PCI cards. If you are using only 10G cards say 'N' here. +config CHELSIO_T1_NAPI + bool "Use Rx Polling (NAPI)" + depends on CHELSIO_T1 + default y + help + NAPI is a driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. + config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c index de48eadddbc..fd5d821f3f2 100644 --- a/drivers/net/chelsio/cxgb2.c +++ b/drivers/net/chelsio/cxgb2.c @@ -220,9 +220,8 @@ static int cxgb_up(struct adapter *adapter) t1_interrupts_clear(adapter); - adapter->params.has_msi = !disable_msi && pci_enable_msi(adapter->pdev) == 0; - err = request_irq(adapter->pdev->irq, - t1_select_intr_handler(adapter), + adapter->params.has_msi = !disable_msi && !pci_enable_msi(adapter->pdev); + err = request_irq(adapter->pdev->irq, t1_interrupt, adapter->params.has_msi ? 0 : IRQF_SHARED, adapter->name, adapter); if (err) { @@ -764,18 +763,7 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { struct adapter *adapter = dev->priv; - /* - * If RX coalescing is requested we use NAPI, otherwise interrupts. - * This choice can be made only when all ports and the TOE are off. - */ - if (adapter->open_device_map == 0) - adapter->params.sge.polling = c->use_adaptive_rx_coalesce; - - if (adapter->params.sge.polling) { - adapter->params.sge.rx_coalesce_usecs = 0; - } else { - adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; - } + adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); @@ -944,7 +932,7 @@ static void t1_netpoll(struct net_device *dev) struct adapter *adapter = dev->priv; local_irq_save(flags); - t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter); + t1_interrupt(adapter->pdev->irq, adapter); local_irq_restore(flags); } #endif @@ -1165,7 +1153,10 @@ static int __devinit init_one(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER netdev->poll_controller = t1_netpoll; #endif +#ifdef CONFIG_CHELSIO_T1_NAPI netdev->weight = 64; + netdev->poll = t1_poll; +#endif SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); } diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 0ca8d876e16..659cb2252e4 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1413,16 +1413,20 @@ static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len) if (unlikely(adapter->vlan_grp && p->vlan_valid)) { st->vlan_xtract++; - if (adapter->params.sge.polling) +#ifdef CONFIG_CHELSIO_T1_NAPI vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, ntohs(p->vlan)); - else +#else vlan_hwaccel_rx(skb, adapter->vlan_grp, ntohs(p->vlan)); - } else if (adapter->params.sge.polling) +#endif + } else { +#ifdef CONFIG_CHELSIO_T1_NAPI netif_receive_skb(skb); - else +#else netif_rx(skb); +#endif + } return 0; } @@ -1572,6 +1576,7 @@ static int process_responses(struct adapter *adapter, int budget) return budget; } +#ifdef CONFIG_CHELSIO_T1_NAPI /* * A simpler version of process_responses() that handles only pure (i.e., * non data-carrying) responses. Such respones are too light-weight to justify @@ -1619,92 +1624,76 @@ static int process_pure_responses(struct adapter *adapter, struct respQ_e *e) * or protection from interrupts as data interrupts are off at this point and * other adapter interrupts do not interfere. */ -static int t1_poll(struct net_device *dev, int *budget) +int t1_poll(struct net_device *dev, int *budget) { struct adapter *adapter = dev->priv; int effective_budget = min(*budget, dev->quota); - int work_done = process_responses(adapter, effective_budget); + *budget -= work_done; dev->quota -= work_done; if (work_done >= effective_budget) return 1; + spin_lock_irq(&adapter->async_lock); __netif_rx_complete(dev); - - /* - * Because we don't atomically flush the following write it is - * possible that in very rare cases it can reach the device in a way - * that races with a new response being written plus an error interrupt - * causing the NAPI interrupt handler below to return unhandled status - * to the OS. To protect against this would require flushing the write - * and doing both the write and the flush with interrupts off. Way too - * expensive and unjustifiable given the rarity of the race. - */ writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING); - return 0; -} + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + spin_unlock_irq(&adapter->async_lock); -/* - * Returns true if the device is already scheduled for polling. - */ -static inline int napi_is_scheduled(struct net_device *dev) -{ - return test_bit(__LINK_STATE_RX_SCHED, &dev->state); + return 0; } /* * NAPI version of the main interrupt handler. */ -static irqreturn_t t1_interrupt_napi(int irq, void *data) +irqreturn_t t1_interrupt(int irq, void *data) { - int handled; struct adapter *adapter = data; + struct net_device *dev = adapter->sge->netdev; struct sge *sge = adapter->sge; - struct respQ *q = &adapter->sge->respQ; + u32 cause; + int handled = 0; - /* - * Clear the SGE_DATA interrupt first thing. Normally the NAPI - * handler has control of the response queue and the interrupt handler - * can look at the queue reliably only once it knows NAPI is off. - * We can't wait that long to clear the SGE_DATA interrupt because we - * could race with t1_poll rearming the SGE interrupt, so we need to - * clear the interrupt speculatively and really early on. - */ - writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + cause = readl(adapter->regs + A_PL_CAUSE); + if (cause == 0 || cause == ~0) + return IRQ_NONE; spin_lock(&adapter->async_lock); - if (!napi_is_scheduled(sge->netdev)) { + if (cause & F_PL_INTR_SGE_DATA) { + struct respQ *q = &adapter->sge->respQ; struct respQ_e *e = &q->entries[q->cidx]; - if (e->GenerationBit == q->genbit) { - if (e->DataValid || - process_pure_responses(adapter, e)) { - if (likely(__netif_rx_schedule_prep(sge->netdev))) - __netif_rx_schedule(sge->netdev); - else if (net_ratelimit()) - printk(KERN_INFO - "NAPI schedule failure!\n"); - } else - writel(q->cidx, adapter->regs + A_SG_SLEEPING); - - handled = 1; - goto unlock; - } else - writel(q->cidx, adapter->regs + A_SG_SLEEPING); - } else if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) { - printk(KERN_ERR "data interrupt while NAPI running\n"); - } - - handled = t1_slow_intr_handler(adapter); + handled = 1; + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + if (e->GenerationBit == q->genbit && + __netif_rx_schedule_prep(dev)) { + if (e->DataValid || process_pure_responses(adapter, e)) { + /* mask off data IRQ */ + writel(adapter->slow_intr_mask, + adapter->regs + A_PL_ENABLE); + __netif_rx_schedule(sge->netdev); + goto unlock; + } + /* no data, no NAPI needed */ + netif_poll_enable(dev); + + } + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + } else + handled = t1_slow_intr_handler(adapter); + if (!handled) sge->stats.unhandled_irqs++; - unlock: +unlock: spin_unlock(&adapter->async_lock); return IRQ_RETVAL(handled != 0); } +#else /* * Main interrupt handler, optimized assuming that we took a 'DATA' * interrupt. @@ -1720,7 +1709,7 @@ static irqreturn_t t1_interrupt_napi(int irq, void *data) * 5. If we took an interrupt, but no valid respQ descriptors was found we * let the slow_intr_handler run and do error handling. */ -static irqreturn_t t1_interrupt(int irq, void *cookie) +irqreturn_t t1_interrupt(int irq, void *cookie) { int work_done; struct respQ_e *e; @@ -1752,11 +1741,7 @@ static irqreturn_t t1_interrupt(int irq, void *cookie) spin_unlock(&adapter->async_lock); return IRQ_RETVAL(work_done != 0); } - -irq_handler_t t1_select_intr_handler(adapter_t *adapter) -{ - return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt; -} +#endif /* * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. @@ -2033,7 +2018,6 @@ static void sge_tx_reclaim_cb(unsigned long data) */ int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) { - sge->netdev->poll = t1_poll; sge->fixed_intrtimer = p->rx_coalesce_usecs * core_ticks_per_usec(sge->adapter); writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER); @@ -2234,7 +2218,6 @@ struct sge * __devinit t1_sge_create(struct adapter *adapter, p->coalesce_enable = 0; p->sample_interval_usecs = 0; - p->polling = 0; return sge; nomem_port: diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h index 7ceb0117d03..d132a0ef2a2 100644 --- a/drivers/net/chelsio/sge.h +++ b/drivers/net/chelsio/sge.h @@ -76,7 +76,9 @@ struct sge *t1_sge_create(struct adapter *, struct sge_params *); int t1_sge_configure(struct sge *, struct sge_params *); int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); void t1_sge_destroy(struct sge *); -irq_handler_t t1_select_intr_handler(adapter_t *adapter); +irqreturn_t t1_interrupt(int irq, void *cookie); +int t1_poll(struct net_device *, int *); + int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); void t1_set_vlan_accel(struct adapter *adapter, int on_off); void t1_sge_start(struct sge *); diff --git a/drivers/net/macb.c b/drivers/net/macb.c index bd0ce98c939..25b559b5d5e 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -264,12 +264,12 @@ static void macb_update_stats(struct macb *bp) WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4); for(; p < end; p++, reg++) - *p += readl(reg); + *p += __raw_readl(reg); } -static void macb_periodic_task(void *arg) +static void macb_periodic_task(struct work_struct *work) { - struct macb *bp = arg; + struct macb *bp = container_of(work, struct macb, periodic_task.work); macb_update_stats(bp); macb_check_media(bp, 1, 0); @@ -1088,7 +1088,7 @@ static int __devinit macb_probe(struct platform_device *pdev) dev->base_addr = regs->start; - INIT_WORK(&bp->periodic_task, macb_periodic_task, bp); + INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task); mutex_init(&bp->mdio_mutex); init_completion(&bp->mdio_complete); diff --git a/drivers/net/macb.h b/drivers/net/macb.h index 8c253db6988..27bf0ae0f0b 100644 --- a/drivers/net/macb.h +++ b/drivers/net/macb.h @@ -250,9 +250,9 @@ /* Register access macros */ #define macb_readl(port,reg) \ - readl((port)->regs + MACB_##reg) + __raw_readl((port)->regs + MACB_##reg) #define macb_writel(port,reg,value) \ - writel((value), (port)->regs + MACB_##reg) + __raw_writel((value), (port)->regs + MACB_##reg) struct dma_desc { u32 addr; @@ -377,7 +377,7 @@ struct macb { unsigned int rx_pending, tx_pending; - struct work_struct periodic_task; + struct delayed_work periodic_task; struct mutex mdio_mutex; struct completion mdio_complete; diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 81f127a78af..94ac168be59 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -71,7 +71,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.0.0" +#define MYRI10GE_VERSION_STR "1.1.0" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -92,8 +92,13 @@ MODULE_LICENSE("Dual BSD/GPL"); #define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff) #define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff +#define MYRI10GE_ALLOC_ORDER 0 +#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE) +#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1) + struct myri10ge_rx_buffer_state { - struct sk_buff *skb; + struct page *page; + int page_offset; DECLARE_PCI_UNMAP_ADDR(bus) DECLARE_PCI_UNMAP_LEN(len) }; @@ -116,9 +121,14 @@ struct myri10ge_rx_buf { u8 __iomem *wc_fifo; /* w/c rx dma addr fifo address */ struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */ struct myri10ge_rx_buffer_state *info; + struct page *page; + dma_addr_t bus; + int page_offset; int cnt; + int fill_cnt; int alloc_fail; int mask; /* number of rx slots -1 */ + int watchdog_needed; }; struct myri10ge_tx_buf { @@ -150,6 +160,7 @@ struct myri10ge_priv { struct myri10ge_rx_buf rx_big; struct myri10ge_rx_done rx_done; int small_bytes; + int big_bytes; struct net_device *dev; struct net_device_stats stats; u8 __iomem *sram; @@ -238,11 +249,6 @@ module_param(myri10ge_force_firmware, int, S_IRUGO); MODULE_PARM_DESC(myri10ge_force_firmware, "Force firmware to assume aligned completions\n"); -static int myri10ge_skb_cross_4k = 0; -module_param(myri10ge_skb_cross_4k, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(myri10ge_skb_cross_4k, - "Can a small skb cross a 4KB boundary?\n"); - static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN; module_param(myri10ge_initial_mtu, int, S_IRUGO); MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU\n"); @@ -266,6 +272,10 @@ static int myri10ge_debug = -1; /* defaults above */ module_param(myri10ge_debug, int, 0); MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)"); +static int myri10ge_fill_thresh = 256; +module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n"); + #define MYRI10GE_FW_OFFSET 1024*1024 #define MYRI10GE_HIGHPART_TO_U32(X) \ (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0) @@ -273,9 +283,9 @@ MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)"); #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8) -static inline void put_be32(__be32 val, __be32 __iomem *p) +static inline void put_be32(__be32 val, __be32 __iomem * p) { - __raw_writel((__force __u32)val, (__force void __iomem *)p); + __raw_writel((__force __u32) val, (__force void __iomem *)p); } static int @@ -804,194 +814,179 @@ myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst, mb(); } -/* - * Set of routines to get a new receive buffer. Any buffer which - * crosses a 4KB boundary must start on a 4KB boundary due to PCIe - * wdma restrictions. We also try to align any smaller allocation to - * at least a 16 byte boundary for efficiency. We assume the linux - * memory allocator works by powers of 2, and will not return memory - * smaller than 2KB which crosses a 4KB boundary. If it does, we fall - * back to allocating 2x as much space as required. - * - * We intend to replace large (>4KB) skb allocations by using - * pages directly and building a fraglist in the near future. - */ - -static inline struct sk_buff *myri10ge_alloc_big(struct net_device *dev, - int bytes) -{ - struct sk_buff *skb; - unsigned long data, roundup; - - skb = netdev_alloc_skb(dev, bytes + 4096 + MXGEFW_PAD); - if (skb == NULL) - return NULL; - - /* Correct skb->truesize so that socket buffer - * accounting is not confused the rounding we must - * do to satisfy alignment constraints. - */ - skb->truesize -= 4096; - - data = (unsigned long)(skb->data); - roundup = (-data) & (4095); - skb_reserve(skb, roundup); - return skb; -} - -/* Allocate 2x as much space as required and use whichever portion - * does not cross a 4KB boundary */ -static inline struct sk_buff *myri10ge_alloc_small_safe(struct net_device *dev, - unsigned int bytes) +static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum) { - struct sk_buff *skb; - unsigned long data, boundary; - - skb = netdev_alloc_skb(dev, 2 * (bytes + MXGEFW_PAD) - 1); - if (unlikely(skb == NULL)) - return NULL; - - /* Correct skb->truesize so that socket buffer - * accounting is not confused the rounding we must - * do to satisfy alignment constraints. - */ - skb->truesize -= bytes + MXGEFW_PAD; - - data = (unsigned long)(skb->data); - boundary = (data + 4095UL) & ~4095UL; - if ((boundary - data) >= (bytes + MXGEFW_PAD)) - return skb; + struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data); - skb_reserve(skb, boundary - data); - return skb; + if ((skb->protocol == htons(ETH_P_8021Q)) && + (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) || + vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) { + skb->csum = hw_csum; + skb->ip_summed = CHECKSUM_COMPLETE; + } } -/* Allocate just enough space, and verify that the allocated - * space does not cross a 4KB boundary */ -static inline struct sk_buff *myri10ge_alloc_small(struct net_device *dev, - int bytes) +static inline void +myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va, + struct skb_frag_struct *rx_frags, int len, int hlen) { - struct sk_buff *skb; - unsigned long roundup, data, end; - - skb = netdev_alloc_skb(dev, bytes + 16 + MXGEFW_PAD); - if (unlikely(skb == NULL)) - return NULL; - - /* Round allocated buffer to 16 byte boundary */ - data = (unsigned long)(skb->data); - roundup = (-data) & 15UL; - skb_reserve(skb, roundup); - /* Verify that the data buffer does not cross a page boundary */ - data = (unsigned long)(skb->data); - end = data + bytes + MXGEFW_PAD - 1; - if (unlikely(((end >> 12) != (data >> 12)) && (data & 4095UL))) { - printk(KERN_NOTICE - "myri10ge_alloc_small: small skb crossed 4KB boundary\n"); - myri10ge_skb_cross_4k = 1; - dev_kfree_skb_any(skb); - skb = myri10ge_alloc_small_safe(dev, bytes); - } - return skb; + struct skb_frag_struct *skb_frags; + + skb->len = skb->data_len = len; + skb->truesize = len + sizeof(struct sk_buff); + /* attach the page(s) */ + + skb_frags = skb_shinfo(skb)->frags; + while (len > 0) { + memcpy(skb_frags, rx_frags, sizeof(*skb_frags)); + len -= rx_frags->size; + skb_frags++; + rx_frags++; + skb_shinfo(skb)->nr_frags++; + } + + /* pskb_may_pull is not available in irq context, but + * skb_pull() (for ether_pad and eth_type_trans()) requires + * the beginning of the packet in skb_headlen(), move it + * manually */ + memcpy(skb->data, va, hlen); + skb_shinfo(skb)->frags[0].page_offset += hlen; + skb_shinfo(skb)->frags[0].size -= hlen; + skb->data_len -= hlen; + skb->tail += hlen; + skb_pull(skb, MXGEFW_PAD); } -static inline int -myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct myri10ge_priv *mgp, - int bytes, int idx) +static void +myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx, + int bytes, int watchdog) { - struct net_device *dev = mgp->dev; - struct pci_dev *pdev = mgp->pdev; - struct sk_buff *skb; - dma_addr_t bus; - int len, retval = 0; + struct page *page; + int idx; - bytes += VLAN_HLEN; /* account for 802.1q vlan tag */ + if (unlikely(rx->watchdog_needed && !watchdog)) + return; - if ((bytes + MXGEFW_PAD) > (4096 - 16) /* linux overhead */ ) - skb = myri10ge_alloc_big(dev, bytes); - else if (myri10ge_skb_cross_4k) - skb = myri10ge_alloc_small_safe(dev, bytes); - else - skb = myri10ge_alloc_small(dev, bytes); + /* try to refill entire ring */ + while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) { + idx = rx->fill_cnt & rx->mask; - if (unlikely(skb == NULL)) { - rx->alloc_fail++; - retval = -ENOBUFS; - goto done; - } - - /* set len so that it only covers the area we - * need mapped for DMA */ - len = bytes + MXGEFW_PAD; - - bus = pci_map_single(pdev, skb->data, len, PCI_DMA_FROMDEVICE); - rx->info[idx].skb = skb; - pci_unmap_addr_set(&rx->info[idx], bus, bus); - pci_unmap_len_set(&rx->info[idx], len, len); - rx->shadow[idx].addr_low = htonl(MYRI10GE_LOWPART_TO_U32(bus)); - rx->shadow[idx].addr_high = htonl(MYRI10GE_HIGHPART_TO_U32(bus)); - -done: - /* copy 8 descriptors (64-bytes) to the mcp at a time */ - if ((idx & 7) == 7) { - if (rx->wc_fifo == NULL) - myri10ge_submit_8rx(&rx->lanai[idx - 7], - &rx->shadow[idx - 7]); - else { - mb(); - myri10ge_pio_copy(rx->wc_fifo, - &rx->shadow[idx - 7], 64); + if ((bytes < MYRI10GE_ALLOC_SIZE / 2) && + (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE)) { + /* we can use part of previous page */ + get_page(rx->page); + } else { + /* we need a new page */ + page = + alloc_pages(GFP_ATOMIC | __GFP_COMP, + MYRI10GE_ALLOC_ORDER); + if (unlikely(page == NULL)) { + if (rx->fill_cnt - rx->cnt < 16) + rx->watchdog_needed = 1; + return; + } + rx->page = page; + rx->page_offset = 0; + rx->bus = pci_map_page(mgp->pdev, page, 0, + MYRI10GE_ALLOC_SIZE, + PCI_DMA_FROMDEVICE); + } + rx->info[idx].page = rx->page; + rx->info[idx].page_offset = rx->page_offset; + /* note that this is the address of the start of the + * page */ + pci_unmap_addr_set(&rx->info[idx], bus, rx->bus); + rx->shadow[idx].addr_low = + htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset); + rx->shadow[idx].addr_high = + htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus)); + + /* start next packet on a cacheline boundary */ + rx->page_offset += SKB_DATA_ALIGN(bytes); + rx->fill_cnt++; + + /* copy 8 descriptors to the firmware at a time */ + if ((idx & 7) == 7) { + if (rx->wc_fifo == NULL) + myri10ge_submit_8rx(&rx->lanai[idx - 7], + &rx->shadow[idx - 7]); + else { + mb(); + myri10ge_pio_copy(rx->wc_fifo, + &rx->shadow[idx - 7], 64); + } } } - return retval; } -static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum) +static inline void +myri10ge_unmap_rx_page(struct pci_dev *pdev, + struct myri10ge_rx_buffer_state *info, int bytes) { - struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data); - - if ((skb->protocol == htons(ETH_P_8021Q)) && - (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) || - vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) { - skb->csum = hw_csum; - skb->ip_summed = CHECKSUM_COMPLETE; + /* unmap the recvd page if we're the only or last user of it */ + if (bytes >= MYRI10GE_ALLOC_SIZE / 2 || + (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) { + pci_unmap_page(pdev, (pci_unmap_addr(info, bus) + & ~(MYRI10GE_ALLOC_SIZE - 1)), + MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE); } } -static inline unsigned long +#define MYRI10GE_HLEN 64 /* The number of bytes to copy from a + * page into an skb */ + +static inline int myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx, int bytes, int len, __wsum csum) { - dma_addr_t bus; struct sk_buff *skb; - int idx, unmap_len; + struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME]; + int i, idx, hlen, remainder; + struct pci_dev *pdev = mgp->pdev; + struct net_device *dev = mgp->dev; + u8 *va; + len += MXGEFW_PAD; idx = rx->cnt & rx->mask; - rx->cnt++; + va = page_address(rx->info[idx].page) + rx->info[idx].page_offset; + prefetch(va); + /* Fill skb_frag_struct(s) with data from our receive */ + for (i = 0, remainder = len; remainder > 0; i++) { + myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes); + rx_frags[i].page = rx->info[idx].page; + rx_frags[i].page_offset = rx->info[idx].page_offset; + if (remainder < MYRI10GE_ALLOC_SIZE) + rx_frags[i].size = remainder; + else + rx_frags[i].size = MYRI10GE_ALLOC_SIZE; + rx->cnt++; + idx = rx->cnt & rx->mask; + remainder -= MYRI10GE_ALLOC_SIZE; + } + + hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN; - /* save a pointer to the received skb */ - skb = rx->info[idx].skb; - bus = pci_unmap_addr(&rx->info[idx], bus); - unmap_len = pci_unmap_len(&rx->info[idx], len); + /* allocate an skb to attach the page(s) to. */ - /* try to replace the received skb */ - if (myri10ge_getbuf(rx, mgp, bytes, idx)) { - /* drop the frame -- the old skbuf is re-cycled */ - mgp->stats.rx_dropped += 1; + skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16); + if (unlikely(skb == NULL)) { + mgp->stats.rx_dropped++; + do { + i--; + put_page(rx_frags[i].page); + } while (i != 0); return 0; } - /* unmap the recvd skb */ - pci_unmap_single(mgp->pdev, bus, unmap_len, PCI_DMA_FROMDEVICE); - - /* mcp implicitly skips 1st bytes so that packet is properly - * aligned */ - skb_reserve(skb, MXGEFW_PAD); - - /* set the length of the frame */ - skb_put(skb, len); + /* Attach the pages to the skb, and trim off any padding */ + myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen); + if (skb_shinfo(skb)->frags[0].size <= 0) { + put_page(skb_shinfo(skb)->frags[0].page); + skb_shinfo(skb)->nr_frags = 0; + } + skb->protocol = eth_type_trans(skb, dev); + skb->dev = dev; - skb->protocol = eth_type_trans(skb, mgp->dev); if (mgp->csum_flag) { if ((skb->protocol == htons(ETH_P_IP)) || (skb->protocol == htons(ETH_P_IPV6))) { @@ -1000,9 +995,8 @@ myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx, } else myri10ge_vlan_ip_csum(skb, csum); } - netif_receive_skb(skb); - mgp->dev->last_rx = jiffies; + dev->last_rx = jiffies; return 1; } @@ -1079,7 +1073,7 @@ static inline void myri10ge_clean_rx_done(struct myri10ge_priv *mgp, int *limit) length, checksum); else rx_ok = myri10ge_rx_done(mgp, &mgp->rx_big, - mgp->dev->mtu + ETH_HLEN, + mgp->big_bytes, length, checksum); rx_packets += rx_ok; rx_bytes += rx_ok * (unsigned long)length; @@ -1094,6 +1088,14 @@ static inline void myri10ge_clean_rx_done(struct myri10ge_priv *mgp, int *limit) rx_done->cnt = cnt; mgp->stats.rx_packets += rx_packets; mgp->stats.rx_bytes += rx_bytes; + + /* restock receive rings if needed */ + if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt < myri10ge_fill_thresh) + myri10ge_alloc_rx_pages(mgp, &mgp->rx_small, + mgp->small_bytes + MXGEFW_PAD, 0); + if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt < myri10ge_fill_thresh) + myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0); + } static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp) @@ -1484,56 +1486,48 @@ static int myri10ge_allocate_rings(struct net_device *dev) goto abort_with_rx_small_info; /* Fill the receive rings */ + mgp->rx_big.cnt = 0; + mgp->rx_small.cnt = 0; + mgp->rx_big.fill_cnt = 0; + mgp->rx_small.fill_cnt = 0; + mgp->rx_small.page_offset = MYRI10GE_ALLOC_SIZE; + mgp->rx_big.page_offset = MYRI10GE_ALLOC_SIZE; + mgp->rx_small.watchdog_needed = 0; + mgp->rx_big.watchdog_needed = 0; + myri10ge_alloc_rx_pages(mgp, &mgp->rx_small, + mgp->small_bytes + MXGEFW_PAD, 0); - for (i = 0; i <= mgp->rx_small.mask; i++) { - status = myri10ge_getbuf(&mgp->rx_small, mgp, - mgp->small_bytes, i); - if (status) { - printk(KERN_ERR - "myri10ge: %s: alloced only %d small bufs\n", - dev->name, i); - goto abort_with_rx_small_ring; - } + if (mgp->rx_small.fill_cnt < mgp->rx_small.mask + 1) { + printk(KERN_ERR "myri10ge: %s: alloced only %d small bufs\n", + dev->name, mgp->rx_small.fill_cnt); + goto abort_with_rx_small_ring; } - for (i = 0; i <= mgp->rx_big.mask; i++) { - status = - myri10ge_getbuf(&mgp->rx_big, mgp, dev->mtu + ETH_HLEN, i); - if (status) { - printk(KERN_ERR - "myri10ge: %s: alloced only %d big bufs\n", - dev->name, i); - goto abort_with_rx_big_ring; - } + myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0); + if (mgp->rx_big.fill_cnt < mgp->rx_big.mask + 1) { + printk(KERN_ERR "myri10ge: %s: alloced only %d big bufs\n", + dev->name, mgp->rx_big.fill_cnt); + goto abort_with_rx_big_ring; } return 0; abort_with_rx_big_ring: - for (i = 0; i <= mgp->rx_big.mask; i++) { - if (mgp->rx_big.info[i].skb != NULL) - dev_kfree_skb_any(mgp->rx_big.info[i].skb); - if (pci_unmap_len(&mgp->rx_big.info[i], len)) - pci_unmap_single(mgp->pdev, - pci_unmap_addr(&mgp->rx_big.info[i], - bus), - pci_unmap_len(&mgp->rx_big.info[i], - len), - PCI_DMA_FROMDEVICE); + for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) { + int idx = i & mgp->rx_big.mask; + myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx], + mgp->big_bytes); + put_page(mgp->rx_big.info[idx].page); } abort_with_rx_small_ring: - for (i = 0; i <= mgp->rx_small.mask; i++) { - if (mgp->rx_small.info[i].skb != NULL) - dev_kfree_skb_any(mgp->rx_small.info[i].skb); - if (pci_unmap_len(&mgp->rx_small.info[i], len)) - pci_unmap_single(mgp->pdev, - pci_unmap_addr(&mgp->rx_small.info[i], - bus), - pci_unmap_len(&mgp->rx_small.info[i], - len), - PCI_DMA_FROMDEVICE); + for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) { + int idx = i & mgp->rx_small.mask; + myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx], + mgp->small_bytes + MXGEFW_PAD); + put_page(mgp->rx_small.info[idx].page); } + kfree(mgp->rx_big.info); abort_with_rx_small_info: @@ -1566,30 +1560,24 @@ static void myri10ge_free_rings(struct net_device *dev) mgp = netdev_priv(dev); - for (i = 0; i <= mgp->rx_big.mask; i++) { - if (mgp->rx_big.info[i].skb != NULL) - dev_kfree_skb_any(mgp->rx_big.info[i].skb); - if (pci_unmap_len(&mgp->rx_big.info[i], len)) - pci_unmap_single(mgp->pdev, - pci_unmap_addr(&mgp->rx_big.info[i], - bus), - pci_unmap_len(&mgp->rx_big.info[i], - len), - PCI_DMA_FROMDEVICE); - } - - for (i = 0; i <= mgp->rx_small.mask; i++) { - if (mgp->rx_small.info[i].skb != NULL) - dev_kfree_skb_any(mgp->rx_small.info[i].skb); - if (pci_unmap_len(&mgp->rx_small.info[i], len)) - pci_unmap_single(mgp->pdev, - pci_unmap_addr(&mgp->rx_small.info[i], - bus), - pci_unmap_len(&mgp->rx_small.info[i], - len), - PCI_DMA_FROMDEVICE); + for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) { + idx = i & mgp->rx_big.mask; + if (i == mgp->rx_big.fill_cnt - 1) + mgp->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE; + myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx], + mgp->big_bytes); + put_page(mgp->rx_big.info[idx].page); } + for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) { + idx = i & mgp->rx_small.mask; + if (i == mgp->rx_small.fill_cnt - 1) + mgp->rx_small.info[idx].page_offset = + MYRI10GE_ALLOC_SIZE; + myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx], + mgp->small_bytes + MXGEFW_PAD); + put_page(mgp->rx_small.info[idx].page); + } tx = &mgp->tx; while (tx->done != tx->req) { idx = tx->done & tx->mask; @@ -1657,19 +1645,18 @@ static int myri10ge_open(struct net_device *dev) */ if (dev->mtu <= ETH_DATA_LEN) - mgp->small_bytes = 128; /* enough for a TCP header */ + /* enough for a TCP header */ + mgp->small_bytes = (128 > SMP_CACHE_BYTES) + ? (128 - MXGEFW_PAD) + : (SMP_CACHE_BYTES - MXGEFW_PAD); else - mgp->small_bytes = ETH_FRAME_LEN; /* enough for an ETH_DATA_LEN frame */ + /* enough for a vlan encapsulated ETH_DATA_LEN frame */ + mgp->small_bytes = VLAN_ETH_FRAME_LEN; /* Override the small buffer size? */ if (myri10ge_small_bytes > 0) mgp->small_bytes = myri10ge_small_bytes; - /* If the user sets an obscenely small MTU, adjust the small - * bytes down to nearly nothing */ - if (mgp->small_bytes >= (dev->mtu + ETH_HLEN)) - mgp->small_bytes = 64; - /* get the lanai pointers to the send and receive rings */ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET, &cmd, 0); @@ -1705,17 +1692,23 @@ static int myri10ge_open(struct net_device *dev) mgp->rx_big.wc_fifo = NULL; } - status = myri10ge_allocate_rings(dev); - if (status != 0) - goto abort_with_nothing; - /* Firmware needs the big buff size as a power of 2. Lie and * tell him the buffer is larger, because we only use 1 * buffer/pkt, and the mtu will prevent overruns. */ - big_pow2 = dev->mtu + ETH_HLEN + MXGEFW_PAD; - while ((big_pow2 & (big_pow2 - 1)) != 0) - big_pow2++; + big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD; + if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) { + while ((big_pow2 & (big_pow2 - 1)) != 0) + big_pow2++; + mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD; + } else { + big_pow2 = MYRI10GE_ALLOC_SIZE; + mgp->big_bytes = big_pow2; + } + + status = myri10ge_allocate_rings(dev); + if (status != 0) + goto abort_with_nothing; /* now give firmware buffers sizes, and MTU */ cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN; @@ -2206,7 +2199,7 @@ static void myri10ge_set_multicast_list(struct net_device *dev) struct myri10ge_cmd cmd; struct myri10ge_priv *mgp; struct dev_mc_list *mc_list; - __be32 data[2] = {0, 0}; + __be32 data[2] = { 0, 0 }; int err; mgp = netdev_priv(dev); @@ -2625,7 +2618,7 @@ static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp) static void myri10ge_watchdog(struct work_struct *work) { struct myri10ge_priv *mgp = - container_of(work, struct myri10ge_priv, watchdog_work); + container_of(work, struct myri10ge_priv, watchdog_work); u32 reboot; int status; u16 cmd, vendor; @@ -2698,6 +2691,21 @@ static void myri10ge_watchdog_timer(unsigned long arg) struct myri10ge_priv *mgp; mgp = (struct myri10ge_priv *)arg; + + if (mgp->rx_small.watchdog_needed) { + myri10ge_alloc_rx_pages(mgp, &mgp->rx_small, + mgp->small_bytes + MXGEFW_PAD, 1); + if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt >= + myri10ge_fill_thresh) + mgp->rx_small.watchdog_needed = 0; + } + if (mgp->rx_big.watchdog_needed) { + myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 1); + if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt >= + myri10ge_fill_thresh) + mgp->rx_big.watchdog_needed = 0; + } + if (mgp->tx.req != mgp->tx.done && mgp->tx.done == mgp->watchdog_tx_done && mgp->watchdog_tx_req != mgp->watchdog_tx_done) diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 9367c574477..d2767e6584a 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -362,96 +362,6 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_IRQ_FLAGS (0) -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) - -#define SMC_IRQ_FLAGS (0) - -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) - -#define SMC_IRQ_FLAGS (0) - -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) - -#define SMC_IRQ_FLAGS (0) - -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) - -#define SMC_IRQ_FLAGS (0) - -#elif defined(CONFIG_ARCH_VERSATILE) - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 1 -#define SMC_NOWAIT 1 - -#define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) -#define SMC_inl(a, r) readl((a) + (r)) -#define SMC_outb(v, a, r) writeb(v, (a) + (r)) -#define SMC_outw(v, a, r) writew(v, (a) + (r)) -#define SMC_outl(v, a, r) writel(v, (a) + (r)) -#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) -#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) - -#define SMC_IRQ_FLAGS (0) - #else #define SMC_CAN_USE_8BIT 1 diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 1f05511fa39..8243150f5b0 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -194,9 +194,9 @@ static void enqueue(struct list_head *node, struct list_head *lh) { unsigned long flags; - spin_lock_irqsave(ugeth_lock, flags); + spin_lock_irqsave(&ugeth_lock, flags); list_add_tail(node, lh); - spin_unlock_irqrestore(ugeth_lock, flags); + spin_unlock_irqrestore(&ugeth_lock, flags); } #endif /* CONFIG_UGETH_FILTERING */ @@ -204,14 +204,14 @@ static struct list_head *dequeue(struct list_head *lh) { unsigned long flags; - spin_lock_irqsave(ugeth_lock, flags); + spin_lock_irqsave(&ugeth_lock, flags); if (!list_empty(lh)) { struct list_head *node = lh->next; list_del(node); - spin_unlock_irqrestore(ugeth_lock, flags); + spin_unlock_irqrestore(&ugeth_lock, flags); return node; } else { - spin_unlock_irqrestore(ugeth_lock, flags); + spin_unlock_irqrestore(&ugeth_lock, flags); return NULL; } } @@ -1852,6 +1852,8 @@ static int init_phy(struct net_device *dev) mii_info->mdio_read = &read_phy_reg; mii_info->mdio_write = &write_phy_reg; + spin_lock_init(&mii_info->mdio_lock); + ugeth->mii_info = mii_info; spin_lock_irq(&ugeth->lock); |