Clear the exclusive monitor when returning from an exception

The patch adds a CLREX or dummy STREX to the exception return path. This
is needed because several atomic/locking operations use a pair of
LDREX/STREXEQ and the EQ condition may not always be satisfied. This
would leave the exclusive monitor status set and may cause problems with
atomic/locking operations in the interrupted code.

With this patch, the atomic_set() operation can be a simple STR
instruction (on SMP systems, the global exclusive monitor is cleared by
STR anyway). Clearing the exclusive monitor during context switch is no
longer needed as this is handled by the exception return path anyway.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jamie Lokier <jamie@shareable.org>

3 files changed, 21 insertions, 26 deletions

diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 9ed2377fe8e..d0daeab2234 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -19,31 +19,21 @@
 
 #ifdef __KERNEL__
 
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
 #define atomic_read(v)	((v)->counter)
+#define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
 
 /*
  * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
  * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.  Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
+ * to ensure that the update happens.
  */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic_set\n"
-"1:	ldrex	%0, [%1]\n"
-"	strex	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
 static inline void atomic_add(int i, atomic_t *v)
 {
 	unsigned long tmp;
@@ -163,8 +153,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long flags;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3d727a8a23b..a332bc7225b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -734,13 +734,6 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_32v6K
-	clrex
-#else
-	strex	r5, r4, [ip]			@ Clear exclusive monitor
-#endif
-#endif
 #if defined(CONFIG_HAS_TLS_REG)
 	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
 #elif !defined(CONFIG_TLS_REG_EMUL)
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index a4eaf4f920c..e17e3c30d95 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -76,13 +76,25 @@
 #ifndef CONFIG_THUMB2_KERNEL
 	.macro	svc_exit, rpsr
 	msr	spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#elif defined (CONFIG_CPU_V6)
+	ldr	r0, [sp]
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#endif
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
+#elif defined (CONFIG_CPU_V6)
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+#endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
 	.else
@@ -98,6 +110,7 @@
 	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
+	clrex					@ clear the exclusive monitor
 	ldr	r0, [sp, #S_SP]			@ top of the stack
 	ldr	r1, [sp, #S_PC]			@ return address
 	tst	r0, #4				@ orig stack 8-byte aligned?
@@ -110,6 +123,7 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
+	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr