diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-02-03 07:58:57 +1100 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-02-03 07:58:57 +1100 |
| commit | 9135f1901ee6449dfe338adf6e40e9c2025b8150 (patch) | |
| tree | 05e1ab38563a93cf0df8c05d21062b85b14f8491 | |
| parent | 124d3b7041f9a0ca7c43a6293e1cae4576c32fd5 (diff) | |
| parent | d59823fa44f7d9babf586b3c705db314aa0f9822 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits)
ide-tape: remove idetape_config_t typedef
ide-tape: remove mtio.h related comments
ide-tape: make function name more accurate
ide-tape: remove unused sense packet commands.
ide-tape: use generic byteorder macros
ide-tape: remove EXPERIMENTAL driver status
ide-tape: use generic scsi commands
ide-tape: remove struct idetape_block_size_page_t
ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t
ide-tape: remove struct idetape_parameter_block_descriptor_t
ide-tape: remove struct idetape_medium_partition_page_t
ide-tape: remove struct idetape_data_compression_page_t
ide-tape: remove struct idetape_inquiry_result_t
ide-tape: remove struct idetape_capabilities_page_t
ide-tape: remove IDETAPE_DEBUG_BUGS
ide-tape: remove IDETAPE_DEBUG_INFO
ide-tape: dump gcw fields on error in idetape_identify_device()
ide-tape: remove struct idetape_mode_parameter_header_t
ide-tape: remove struct idetape_request_sense_result_t
ide-tape: remove dead code
...
77 files changed, 1989 insertions, 2849 deletions
diff --git a/Documentation/ide/ChangeLog.ide-tape.1995-2002 b/Documentation/ide/ChangeLog.ide-tape.1995-2002 new file mode 100644 index 00000000000..877fac8770b --- /dev/null +++ b/Documentation/ide/ChangeLog.ide-tape.1995-2002 @@ -0,0 +1,257 @@ +/* + * Ver 0.1 Nov 1 95 Pre-working code :-) + * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure + * was successful ! (Using tar cvf ... on the block + * device interface). + * A longer backup resulted in major swapping, bad + * overall Linux performance and eventually failed as + * we received non serial read-ahead requests from the + * buffer cache. + * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the + * character device interface. Linux's responsiveness + * and performance doesn't seem to be much affected + * from the background backup procedure. + * Some general mtio.h magnetic tape operations are + * now supported by our character device. As a result, + * popular tape utilities are starting to work with + * ide tapes :-) + * The following configurations were tested: + * 1. An IDE ATAPI TAPE shares the same interface + * and irq with an IDE ATAPI CDROM. + * 2. An IDE ATAPI TAPE shares the same interface + * and irq with a normal IDE disk. + * Both configurations seemed to work just fine ! + * However, to be on the safe side, it is meanwhile + * recommended to give the IDE TAPE its own interface + * and irq. + * The one thing which needs to be done here is to + * add a "request postpone" feature to ide.c, + * so that we won't have to wait for the tape to finish + * performing a long media access (DSC) request (such + * as a rewind) before we can access the other device + * on the same interface. This effect doesn't disturb + * normal operation most of the time because read/write + * requests are relatively fast, and once we are + * performing one tape r/w request, a lot of requests + * from the other device can be queued and ide.c will + * service all of them after this single tape request. + * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree. + * On each read / write request, we now ask the drive + * if we can transfer a constant number of bytes + * (a parameter of the drive) only to its buffers, + * without causing actual media access. If we can't, + * we just wait until we can by polling the DSC bit. + * This ensures that while we are not transferring + * more bytes than the constant referred to above, the + * interrupt latency will not become too high and + * we won't cause an interrupt timeout, as happened + * occasionally in the previous version. + * While polling for DSC, the current request is + * postponed and ide.c is free to handle requests from + * the other device. This is handled transparently to + * ide.c. The hwgroup locking method which was used + * in the previous version was removed. + * Use of new general features which are provided by + * ide.c for use with atapi devices. + * (Programming done by Mark Lord) + * Few potential bug fixes (Again, suggested by Mark) + * Single character device data transfers are now + * not limited in size, as they were before. + * We are asking the tape about its recommended + * transfer unit and send a larger data transfer + * as several transfers of the above size. + * For best results, use an integral number of this + * basic unit (which is shown during driver + * initialization). I will soon add an ioctl to get + * this important parameter. + * Our data transfer buffer is allocated on startup, + * rather than before each data transfer. This should + * ensure that we will indeed have a data buffer. + * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape + * shared an interface with another device. + * (poll_for_dsc was a complete mess). + * Removed some old (non-active) code which had + * to do with supporting buffer cache originated + * requests. + * The block device interface can now be opened, so + * that general ide driver features like the unmask + * interrupts flag can be selected with an ioctl. + * This is the only use of the block device interface. + * New fast pipelined operation mode (currently only on + * writes). When using the pipelined mode, the + * throughput can potentially reach the maximum + * tape supported throughput, regardless of the + * user backup program. On my tape drive, it sometimes + * boosted performance by a factor of 2. Pipelined + * mode is enabled by default, but since it has a few + * downfalls as well, you may want to disable it. + * A short explanation of the pipelined operation mode + * is available below. + * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition. + * Added pipeline read mode. As a result, restores + * are now as fast as backups. + * Optimized shared interface behavior. The new behavior + * typically results in better IDE bus efficiency and + * higher tape throughput. + * Pre-calculation of the expected read/write request + * service time, based on the tape's parameters. In + * the pipelined operation mode, this allows us to + * adjust our polling frequency to a much lower value, + * and thus to dramatically reduce our load on Linux, + * without any decrease in performance. + * Implemented additional mtio.h operations. + * The recommended user block size is returned by + * the MTIOCGET ioctl. + * Additional minor changes. + * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the + * use of some block sizes during a restore procedure. + * The character device interface will now present a + * continuous view of the media - any mix of block sizes + * during a backup/restore procedure is supported. The + * driver will buffer the requests internally and + * convert them to the tape's recommended transfer + * unit, making performance almost independent of the + * chosen user block size. + * Some improvements in error recovery. + * By cooperating with ide-dma.c, bus mastering DMA can + * now sometimes be used with IDE tape drives as well. + * Bus mastering DMA has the potential to dramatically + * reduce the CPU's overhead when accessing the device, + * and can be enabled by using hdparm -d1 on the tape's + * block device interface. For more info, read the + * comments in ide-dma.c. + * Ver 1.4 Mar 13 96 Fixed serialize support. + * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85. + * Fixed pipelined read mode inefficiency. + * Fixed nasty null dereferencing bug. + * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver. + * Fixed end of media bug. + * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model. + * Ver 1.8 Sep 26 96 Attempt to find a better balance between good + * interactive response and high system throughput. + * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather + * than requiring an explicit FSF command. + * Abort pending requests at end of media. + * MTTELL was sometimes returning incorrect results. + * Return the real block size in the MTIOCGET ioctl. + * Some error recovery bug fixes. + * Ver 1.10 Nov 5 96 Major reorganization. + * Reduced CPU overhead a bit by eliminating internal + * bounce buffers. + * Added module support. + * Added multiple tape drives support. + * Added partition support. + * Rewrote DSC handling. + * Some portability fixes. + * Removed ide-tape.h. + * Additional minor changes. + * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling. + * Use ide_stall_queue() for DSC overlap. + * Use the maximum speed rather than the current speed + * to compute the request service time. + * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data + * corruption, which could occur if the total number + * of bytes written to the tape was not an integral + * number of tape blocks. + * Add support for INTERRUPT DRQ devices. + * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB + * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives. + * Replace cli()/sti() with hwgroup spinlocks. + * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup + * spinlock with private per-tape spinlock. + * Ver 1.16 Sep 1 99 Add OnStream tape support. + * Abort read pipeline on EOD. + * Wait for the tape to become ready in case it returns + * "in the process of becoming ready" on open(). + * Fix zero padding of the last written block in + * case the tape block size is larger than PAGE_SIZE. + * Decrease the default disconnection time to tn. + * Ver 1.16e Oct 3 99 Minor fixes. + * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen, + * niessen@iae.nl / arnold.niessen@philips.com + * GO-1) Undefined code in idetape_read_position + * according to Gadi's email + * AJN-1) Minor fix asc == 11 should be asc == 0x11 + * in idetape_issue_packet_command (did effect + * debugging output only) + * AJN-2) Added more debugging output, and + * added ide-tape: where missing. I would also + * like to add tape->name where possible + * AJN-3) Added different debug_level's + * via /proc/ide/hdc/settings + * "debug_level" determines amount of debugging output; + * can be changed using /proc/ide/hdx/settings + * 0 : almost no debugging output + * 1 : 0+output errors only + * 2 : 1+output all sensekey/asc + * 3 : 2+follow all chrdev related procedures + * 4 : 3+follow all procedures + * 5 : 4+include pc_stack rq_stack info + * 6 : 5+USE_COUNT updates + * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail + * from 5 to 10 minutes + * AJN-5) Changed maximum number of blocks to skip when + * reading tapes with multiple consecutive write + * errors from 100 to 1000 in idetape_get_logical_blk + * Proposed changes to code: + * 1) output "logical_blk_num" via /proc + * 2) output "current_operation" via /proc + * 3) Either solve or document the fact that `mt rewind' is + * required after reading from /dev/nhtx to be + * able to rmmod the idetape module; + * Also, sometimes an application finishes but the + * device remains `busy' for some time. Same cause ? + * Proposed changes to release-notes: + * 4) write a simple `quickstart' section in the + * release notes; I volunteer if you don't want to + * 5) include a pointer to video4linux in the doc + * to stimulate video applications + * 6) release notes lines 331 and 362: explain what happens + * if the application data rate is higher than 1100 KB/s; + * similar approach to lower-than-500 kB/s ? + * 7) 6.6 Comparison; wouldn't it be better to allow different + * strategies for read and write ? + * Wouldn't it be better to control the tape buffer + * contents instead of the bandwidth ? + * 8) line 536: replace will by would (if I understand + * this section correctly, a hypothetical and unwanted situation + * is being described) + * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames. + * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl + * - Add idetape_onstream_mode_sense_tape_parameter_page + * function to get tape capacity in frames: tape->capacity. + * - Add support for DI-50 drives( or any DI- drive). + * - 'workaround' for read error/blank block around block 3000. + * - Implement Early warning for end of media for Onstream. + * - Cosmetic code changes for readability. + * - Idetape_position_tape should not use SKIP bit during + * Onstream read recovery. + * - Add capacity, logical_blk_num and first/last_frame_position + * to /proc/ide/hd?/settings. + * - Module use count was gone in the Linux 2.4 driver. + * Ver 1.17a Apr 2001 Willem Riede osst@riede.org + * - Get drive's actual block size from mode sense block descriptor + * - Limit size of pipeline + * Ver 1.17b Oct 2002 Alan Stern <stern@rowland.harvard.edu> + * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used + * it in the code! + * Actually removed aborted stages in idetape_abort_pipeline + * instead of just changing the command code. + * Made the transfer byte count for Request Sense equal to the + * actual length of the data transfer. + * Changed handling of partial data transfers: they do not + * cause DMA errors. + * Moved initiation of DMA transfers to the correct place. + * Removed reference to unallocated memory. + * Made __idetape_discard_read_pipeline return the number of + * sectors skipped, not the number of stages. + * Replaced errant kfree() calls with __idetape_kfree_stage(). + * Fixed off-by-one error in testing the pipeline length. + * Fixed handling of filemarks in the read pipeline. + * Small code optimization for MTBSF and MTBSFM ioctls. + * Don't try to unlock the door during device close if is + * already unlocked! + * Cosmetic fixes to miscellaneous debugging output messages. + * Set the minimum /proc/ide/hd?/settings values for "pipeline", + * "pipeline_min", and "pipeline_max" to 1. + */ diff --git a/Documentation/ide/ide-tape.txt b/Documentation/ide/ide-tape.txt new file mode 100644 index 00000000000..658f271a373 --- /dev/null +++ b/Documentation/ide/ide-tape.txt @@ -0,0 +1,146 @@ +/* + * IDE ATAPI streaming tape driver. + * + * This driver is a part of the Linux ide driver. + * + * The driver, in co-operation with ide.c, basically traverses the + * request-list for the block device interface. The character device + * interface, on the other hand, creates new requests, adds them + * to the request-list of the block device, and waits for their completion. + * + * Pipelined operation mode is now supported on both reads and writes. + * + * The block device major and minor numbers are determined from the + * tape's relative position in the ide interfaces, as explained in ide.c. + * + * The character device interface consists of the following devices: + * + * ht0 major 37, minor 0 first IDE tape, rewind on close. + * ht1 major 37, minor 1 second IDE tape, rewind on close. + * ... + * nht0 major 37, minor 128 first IDE tape, no rewind on close. + * nht1 major 37, minor 129 second IDE tape, no rewind on close. + * ... + * + * The general magnetic tape commands compatible interface, as defined by + * include/linux/mtio.h, is accessible through the character device. + * + * General ide driver configuration options, such as the interrupt-unmask + * flag, can be configured by issuing an ioctl to the block device interface, + * as any other ide device. + * + * Our own ide-tape ioctl's can be issued to either the block device or + * the character device interface. + * + * Maximal throughput with minimal bus load will usually be achieved in the + * following scenario: + * + * 1. ide-tape is operating in the pipelined operation mode. + * 2. No buffering is performed by the user backup program. + * + * Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. + * + * Here are some words from the first releases of hd.c, which are quoted + * in ide.c and apply here as well: + * + * | Special care is recommended. Have Fun! + * + * + * An overview of the pipelined operation mode. + * + * In the pipelined write mode, we will usually just add requests to our + * pipeline and return immediately, before we even start to service them. The + * user program will then have enough time to prepare the next request while + * we are still busy servicing previous requests. In the pipelined read mode, + * the situation is similar - we add read-ahead requests into the pipeline, + * before the user even requested them. + * + * The pipeline can be viewed as a "safety net" which will be activated when + * the system load is high and prevents the user backup program from keeping up + * with the current tape speed. At this point, the pipeline will get + * shorter and shorter but the tape will still be streaming at the same speed. + * Assuming we have enough pipeline stages, the system load will hopefully + * decrease before the pipeline is completely empty, and the backup program + * will be able to "catch up" and refill the pipeline again. + * + * When using the pipelined mode, it would be best to disable any type of + * buffering done by the user program, as ide-tape already provides all the + * benefits in the kernel, where it can be done in a more efficient way. + * As we will usually not block the user program on a request, the most + * efficient user code will then be a simple read-write-read-... cycle. + * Any additional logic will usually just slow down the backup process. + * + * Using the pipelined mode, I get a constant over 400 KBps throughput, + * which seems to be the maximum throughput supported by my tape. + * + * However, there are some downfalls: + * + * 1. We use memory (for data buffers) in proportional to the number + * of pipeline stages (each stage is about 26 KB with my tape). + * 2. In the pipelined write mode, we cheat and postpone error codes + * to the user task. In read mode, the actual tape position + * will be a bit further than the last requested block. + * + * Concerning (1): + * + * 1. We allocate stages dynamically only when we need them. When + * we don't need them, we don't consume additional memory. In + * case we can't allocate stages, we just manage without them + * (at the expense of decreased throughput) so when Linux is + * tight in memory, we will not pose additional difficulties. + * + * 2. The maximum number of stages (which is, in fact, the maximum + * amount of memory) which we allocate is limited by the compile + * time parameter IDETAPE_MAX_PIPELINE_STAGES. + * + * 3. The maximum number of stages is a controlled parameter - We + * don't start from the user defined maximum number of stages + * but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we + * will not even allocate this amount of stages if the user + * program can't handle the speed). We then implement a feedback + * loop which checks if the pipeline is empty, and if it is, we + * increase the maximum number of stages as necessary until we + * reach the optimum value which just manages to keep the tape + * busy with minimum allocated memory or until we reach + * IDETAPE_MAX_PIPELINE_STAGES. + * + * Concerning (2): + * + * In pipelined write mode, ide-tape can not return accurate error codes + * to the user program since we usually just add the request to the + * pipeline without waiting for it to be serviced. In case an error + * occurs, I will report it on the next user request. + * + * In the pipelined read mode, subsequent read requests or forward + * filemark spacing will perform correctly, as we preserve all blocks + * and filemarks which we encountered during our excess read-ahead. + * + * For accurate tape positioning and error reporting, disabling + * pipelined mode might be the best option. + * + * You can enable/disable/tune the pipelined operation mode by adjusting + * the compile time parameters below. + * + * + * Possible improvements. + * + * 1. Support for the ATAPI overlap protocol. + * + * In order to maximize bus throughput, we currently use the DSC + * overlap method which enables ide.c to service requests from the + * other device while the tape is busy executing a command. The + * DSC overlap method involves polling the tape's status register + * for the DSC bit, and servicing the other device while the tape + * isn't ready. + * + * In the current QIC development standard (December 1995), + * it is recommended that new tape drives will *in addition* + * implement the ATAPI overlap protocol, which is used for the + * same purpose - efficient use of the IDE bus, but is interrupt + * driven and thus has much less CPU overhead. + * + * ATAPI overlap is likely to be supported in most new ATAPI + * devices, including new ATAPI cdroms, and thus provides us + * a method by which we can achieve higher throughput when + * sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. + */ diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e42a465f571..45b26ed351c 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -216,8 +216,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS memory, though. config BLK_DEV_IDETAPE - tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Include IDE/ATAPI TAPE support" help If you have an IDE tape drive using the ATAPI protocol, say Y. ATAPI is a newer protocol used by IDE tape and CD-ROM drives, diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 037300fa284..0e7574c0ee6 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -28,8 +28,10 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq, ide_hwif_t **hwif) { + ide_hwif_t *hwif; hw_regs_t hw; int i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; memset(&hw, 0, sizeof(hw)); @@ -44,8 +46,24 @@ bastide_register(unsigned int base, unsigned int aux, int irq, hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); hw.irq = irq; - ide_register_hw(&hw, NULL, hwif); + hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif == NULL) + goto out; + i = hwif->index; + + if (hwif->present) + ide_unregister(i, 0, 0); + else if (!hwif->hold) + ide_init_port_data(hwif, i); + + ide_init_port_hw(hwif, &hw); + hwif->quirkproc = NULL; + + idx[0] = i; + + ide_device_add(idx, NULL); +out: return 0; } diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 8d2cc47a362..fb00f3827ec 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -377,9 +377,6 @@ static void icside_dma_lost_irq(ide_drive_t *drive) static void icside_dma_init(ide_hwif_t *hwif) { - hwif->mwdma_mask = 7; /* MW0..2 */ - hwif->swdma_mask = 7; /* SW0..2 */ - hwif->dmatable_cpu = NULL; hwif->dmatable_dma = 0; hwif->set_dma_mode = icside_set_dma_mode; @@ -459,11 +456,19 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } +static const struct ide_port_info icside_v6_port_info __initdata = { + .host_flags = IDE_HFLAG_SERIALIZE | + IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_NO_AUTOTUNE, + .mwdma_mask = ATA_MWDMA2, + .swdma_mask = ATA_SWDMA2, +}; + static int __init icside_register_v6(struct icside_state *state, struct expansion_card *ec) { @@ -472,6 +477,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) unsigned int sel = 0; int ret; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + struct ide_port_info d = icside_v6_port_info; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); if (!ioc_base) { @@ -521,30 +527,25 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->hwif[1] = mate; hwif->maskproc = icside_maskproc; - hwif->channel = 0; hwif->hwif_data = state; - hwif->mate = mate; - hwif->serialized = 1; hwif->config_data = (unsigned long)ioc_base; hwif->select_data = sel; mate->maskproc = icside_maskproc; - mate->channel = 1; mate->hwif_data = state; - mate->mate = hwif; - mate->serialized = 1; mate->config_data = (unsigned long)ioc_base; mate->select_data = sel | 1; if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { icside_dma_init(hwif); icside_dma_init(mate); - } + } else + d.mwdma_mask = d.swdma_mask = 0; idx[0] = hwif->index; idx[1] = mate->index; - ide_device_add(idx); + ide_device_add(idx, &d); return 0; diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 60f2497542c..43a70e91363 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -39,7 +39,7 @@ static int __init ide_arm_init(void) ide_init_port_hw(hwif, &hw); idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); } return 0; diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index c8b6581e624..efba00d2fc3 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -58,7 +58,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); ecard_set_drvdata(ec, hwif); goto out; @@ -76,7 +76,7 @@ static void __devexit rapide_remove(struct expansion_card *ec) ecard_set_drvdata(ec, NULL); - ide_unregister(hwif->index); + ide_unregister(hwif->index, 0, 0); ecard_release_resources(ec); } diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 0640a38ff12..00587a8c2ba 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -753,6 +753,15 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed) cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); } +static const struct ide_port_info cris_port_info __initdata = { + .chipset = ide_etrax100, + .host_flags = IDE_HFLAG_NO_ATAPI_DMA | + IDE_HFLAG_NO_DMA, /* no SFF-style DMA */ + .pio_mask = ATA_PIO4, + .udma_mask = cris_ultra_mask, + .mwdma_mask = ATA_MWDMA2, +}; + static int __init init_e100_ide(void) { hw_regs_t hw; @@ -780,7 +789,6 @@ static int __init init_e100_ide(void) ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); hwif->mmio = 1; - hwif->chipset = ide_etrax100; hwif->set_pio_mode = &cris_set_pio_mode; hwif->set_dma_mode = &cris_set_dma_mode; hwif->ata_input_data = &cris_ide_input_data; @@ -799,12 +807,6 @@ static int __init init_e100_ide(void) hwif->INB = &cris_ide_inb; hwif->INW = &cris_ide_inw; hwif->cbl = ATA_CBL_PATA40; - hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - hwif->pio_mask = ATA_PIO4, - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - hwif->ultra_mask = cris_ultra_mask; - hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */ idx[h] = hwif->index; } @@ -820,7 +822,7 @@ static int __init init_e100_ide(void) cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD); cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0); - ide_device_add(idx); + ide_device_add(idx, &cris_port_info); return 0; } @@ -1032,11 +1034,7 @@ static int cris_dma_setup(ide_drive_t *drive) static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command) { - /* set the irq handler which will finish the request when DMA is done */ - ide_set_handler(drive, &cris_dma_intr, WAIT_CMD, NULL); - - /* issue cmd to drive */ - cris_ide_outb(command, IDE_COMMAND_REG); + ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL); } static void cris_dma_start(ide_drive_t *drive) diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 02432958dfe..520aec07570 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -114,7 +114,7 @@ static int __init h8300_ide_init(void) idx[0] = index; - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 68bc6184478..25aaeae1e83 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -39,7 +39,6 @@ struct GTM_buffer { }; struct ide_acpi_drive_link { - ide_drive_t *drive; acpi_handle obj_handle; u8 idbuff[512]; }; @@ -280,16 +279,6 @@ static int do_drive_get_GTF(ide_drive_t *drive, port = hwif->channel ? drive->dn - 2: drive->dn; - if (!drive->acpidata) { - if (port == 0) { - drive->acpidata = &hwif->acpidata->master; - hwif->acpidata->master.drive = drive; - } else { - drive->acpidata = &hwif->acpidata->slave; - hwif->acpidata->slave.drive = drive; - } - } - DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n", hwif->name, dev->bus_id, port, hwif->channel); @@ -494,7 +483,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive) return ret; } -EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs); /** * ide_acpi_get_timing - get the channel (controller) timings @@ -580,7 +568,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) kfree(output.pointer); } -EXPORT_SYMBOL_GPL(ide_acpi_get_timing); /** * ide_acpi_push_timing - set the channel (controller) timings @@ -634,7 +621,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif) } DEBPRINT("_STM status: %d\n", status); } -EXPORT_SYMBOL_GPL(ide_acpi_push_timing); /** * ide_acpi_set_state - set the channel power state @@ -688,11 +674,6 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) */ void ide_acpi_init(ide_hwif_t *hwif) { - int unit; - int err; - struct ide_acpi_drive_link *master; - struct ide_acpi_drive_link *slave; - ide_acpi_blacklist(); hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL); @@ -704,40 +685,38 @@ void ide_acpi_init(ide_hwif_t *hwif) DEBPRINT("no ACPI object for %s found\n", hwif->name); kfree(hwif->acpidata); hwif->acpidata = NULL; - return; } +} + +void ide_acpi_port_init_devices(ide_hwif_t *hwif) +{ + ide_drive_t *drive; + int i, err; + + if (hwif->acpidata == NULL) + return; /* * The ACPI spec mandates that we send information * for both drives, regardless whether they are connected * or not. */ - hwif->acpidata->master.drive = &hwif->drives[0]; hwif->drives[0].acpidata = &hwif->acpidata->master; - master = &hwif->acpidata->master; - - hwif->acpidata->slave.drive = &hwif->drives[1]; hwif->drives[1].acpidata = &hwif->acpidata->slave; - slave = &hwif->acpidata->slave; - /* * Send IDENTIFY for each drive */ - if (master->drive->present) { - err = taskfile_lib_get_identify(master->drive, master->idbuff); - if (err) { - DEBPRINT("identify device %s failed (%d)\n", - master->drive->name, err); - } - } + for (i = 0; i < MAX_DRIVES; i++) { + drive = &hwif->drives[i]; + + if (!drive->present) + continue; - if (slave->drive->present) { - err = taskfile_lib_get_identify(slave->drive, slave->idbuff); - if (err) { + err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff); + if (err) DEBPRINT("identify device %s failed (%d)\n", - slave->drive->name, err); - } + drive->name, err); } if (ide_noacpionboot) { @@ -753,13 +732,11 @@ void ide_acpi_init(ide_hwif_t *hwif) ide_acpi_get_timing(hwif); ide_acpi_push_timing(hwif); - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; + for (i = 0; i < MAX_DRIVES; i++) { + drive = &hwif->drives[i]; - if (drive->present) { + if (drive->present) /* Execute ACPI startup code */ ide_acpi_exec_tfs(drive); - } } } -EXPORT_SYMBOL_GPL(ide_acpi_init); diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 23074e84472..ee4d458e2bb 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -604,8 +604,6 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, * Block read functions. */ -typedef void (xfer_func_t)(ide_drive_t *, void *, u32); - static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) { while (len > 0) { diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 7beaf1e9be1..3cf59f2c392 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -819,6 +819,26 @@ int ide_set_dma(ide_drive_t *drive) return 0; } +void ide_check_dma_crc(ide_drive_t *drive) +{ + u8 mode; + + ide_dma_off_quietly(drive); + drive->crc_count = 0; + mode = drive->current_speed; + /* + * Don't try non Ultra-DMA modes without iCRC's. Force the + * device to PIO and make the user enable SWDMA/MWDMA modes. + */ + if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7) + mode--; + else + mode = XFER_PIO_4; + ide_set_xfer_rate(drive, mode); + if (drive->current_speed >= XFER_SW_DMA_0) + ide_dma_on(drive); +} + #ifdef CONFIG_BLK_DEV_IDEDMA_PCI void ide_dma_lost_irq (ide_drive_t *drive) { diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3512637ae8d..f8fe6ee128f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -4,11 +4,6 @@ * Copyright (C) 1996-1999 Gadi Oxman <gadio@netvision.net.il> * Copyright (C) 2000-2002 Paul Bristow <paul@paulbristow.net> * Copyright (C) 2005 Bartlomiej Zolnierkiewicz - */ - -/* - * The driver currently doesn't have any fancy features, just the bare - * minimum read/write support. * * This driver supports the following IDE floppy drives: * @@ -20,7 +15,7 @@ * Documentation/ide/ChangeLog.ide-floppy.1996-2002 */ -#define IDEFLOPPY_VERSION "0.99.newide" +#define IDEFLOPPY_VERSION "1.00" #include <linux/module.h> #include <linux/types.h> @@ -42,179 +37,91 @@ #include <scsi/scsi_ioctl.h> #include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/io.h> +#include <linux/irq.h> +#include <linux/uaccess.h> +#include <linux/io.h> #include <asm/unaligned.h> -/* - * The following are used to debug the driver. - */ +/* define to see debug info */ #define IDEFLOPPY_DEBUG_LOG 0 -#define IDEFLOPPY_DEBUG_INFO 0 -#define IDEFLOPPY_DEBUG_BUGS 1 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ -#define IDEFLOPPY_DEBUG( fmt, args... ) +#define IDEFLOPPY_DEBUG(fmt, args...) #if IDEFLOPPY_DEBUG_LOG -#define debug_log printk +#define debug_log(fmt, args...) \ + printk(KERN_INFO "ide-floppy: " fmt, ## args) #else -#define debug_log(fmt, args... ) do {} while(0) +#define debug_log(fmt, args...) do {} while (0) #endif -/* - * Some drives require a longer irq timeout. - */ +/* Some drives require a longer irq timeout. */ #define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD) /* - * After each failed packet command we issue a request sense command - * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times. + * After each failed packet command we issue a request sense command and retry + * the packet command IDEFLOPPY_MAX_PC_RETRIES times. */ #define IDEFLOPPY_MAX_PC_RETRIES 3 /* - * With each packet command, we allocate a buffer of - * IDEFLOPPY_PC_BUFFER_SIZE bytes. + * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE + * bytes. */ #define IDEFLOPPY_PC_BUFFER_SIZE 256 /* - * In various places in the driver, we need to allocate storage - * for packet commands and requests, which will remain valid while - * we leave the driver to wait for an interrupt or a timeout event. + * In various places in the driver, we need to allocate storage for packet + * commands and requests, which will remain valid while we leave the driver to + * wait for an interrupt or a timeout event. */ #define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES) -/* - * Our view of a packet command. - */ typedef struct idefloppy_packet_command_s { u8 c[12]; /* Actual packet bytes */ - int retries; /* On each retry, we increment retries */ + int retries; /* On each retry, we increment + retries */ int error; /* Error code */ int request_transfer; /* Bytes to transfer */ int actually_transferred; /* Bytes actually transferred */ int buffer_size; /* Size of our data buffer */ - int b_count; /* Missing/Available data on the current buffer */ + int b_count; /* Missing/Available data on + the current buffer */ struct request *rq; /* The corresponding request */ u8 *buffer; /* Data buffer */ - u8 *current_position; /* Pointer into the above buffer */ - void (*callback) (ide_drive_t *); /* Called when this packet command is completed */ + u8 *current_position; /* Pointer into above buffer */ + void (*callback) (ide_drive_t *); /* Called when this packet + command is completed */ u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */ - unsigned long flags; /* Status/Action bit flags: long for set_bit */ + unsigned long flags; /* Status/Action bit flags: long + for set_bit */ } idefloppy_pc_t; -/* - * Packet command flag bits. - */ -#define PC_ABORT 0 /* Set when an error is considered normal - We won't retry */ -#define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */ -#define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */ -#define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */ -#define PC_WRITING 5 /* Data direction */ - -#define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */ - -/* - * Removable Block Access Capabilities Page - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x1b */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; /* Should be 0 */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; /* Should be 0 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned page_code :6; /* Page code - Should be 0x1b */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 page_length; /* Page Length - Should be 0xa */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved2 :6; - unsigned srfp :1; /* Supports reporting progress of format */ - unsigned sflp :1; /* System floppy type device */ - unsigned tlun :3; /* Total logical units supported by the device */ - unsigned reserved3 :3; - unsigned sml :1; /* Single / Multiple lun supported */ - unsigned ncd :1; /* Non cd optical device */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned sflp :1; /* System floppy type device */ - unsigned srfp :1; /* Supports reporting progress of format */ - unsigned reserved2 :6; - unsigned ncd :1; /* Non cd optical device */ - unsigned sml :1; /* Single / Multiple lun supported */ - unsigned reserved3 :3; - unsigned tlun :3; /* Total logical units supported by the device */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 reserved[8]; -} idefloppy_capabilities_page_t; - -/* - * Flexible disk page. - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x5 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; /* The device is capable of saving the page */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; /* The device is capable of saving the page */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned page_code :6; /* Page code - Should be 0x5 */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 page_length; /* Page Length - Should be 0x1e */ - u16 transfer_rate; /* In kilobits per second */ - u8 heads, sectors; /* Number of heads, Number of sectors per track */ - u16 sector_size; /* Byes per sector */ - u16 cyls; /* Number of cylinders */ - u8 reserved10[10]; - u8 motor_delay; /* Motor off delay */ - u8 reserved21[7]; - u16 rpm; /* Rotations per minute */ - u8 reserved30[2]; -} idefloppy_flexible_disk_page_t; - -/* - * Format capacity - */ -typedef struct { - u8 reserved[3]; - u8 length; /* Length of the following descriptors in bytes */ -} idefloppy_capacity_header_t; - -typedef struct { - u32 blocks; /* Number of blocks */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned dc :2; /* Descriptor Code */ - unsigned reserved :6; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved :6; - unsigned dc :2; /* Descriptor Code */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 length_msb; /* Block Length (MSB)*/ - u16 length; /* Block Length */ -} idefloppy_capacity_descriptor_t; +/* Packet command flag bits. */ +enum { + /* 1 when we prefer to use DMA if possible */ + PC_FLAG_DMA_RECOMMENDED = (1 << 0), + /* 1 while DMA in progress */ + PC_FLAG_DMA_IN_PROGRESS = (1 << 1), + /* 1 when encountered problem during DMA */ + PC_FLAG_DMA_ERROR = (1 << 2), + /* Data direction */ + PC_FLAG_WRITING = (1 << 3), + /* Suppress error reporting */ + PC_FLAG_SUPPRESS_ERROR = (1 << 4), +}; +/* format capacities descriptor codes */ #define CAPACITY_INVALID 0x00 #define CAPACITY_UNFORMATTED 0x01 #define CAPACITY_CURRENT 0x02 #define CAPACITY_NO_CARTRIDGE 0x03 /* - * Most of our global data which we need to save even as we leave the - * driver due to an interrupt or a timer event is stored in a variable - * of type idefloppy_floppy_t, defined below. + * Most of our global data which we need to save even as we leave the driver + * due to an interrupt or a timer event is stored in a variable of type + * idefloppy_floppy_t, defined below. */ typedef struct ide_floppy_obj { ide_drive_t *drive; @@ -235,23 +142,19 @@ typedef struct ide_floppy_obj { /* We implement a circular array */ int rq_stack_index; - /* - * Last error information - */ + /* Last error information */ u8 sense_key, asc, ascq; /* delay this long before sending packet command */ u8 ticks; int progress_indication; - /* - * Device information - */ + /* Device information */ /* Current format */ int blocks, block_size, bs_factor; - /* Last format capacity */ - idefloppy_capacity_descriptor_t capacity; + /* Last format capacity descriptor */ + u8 cap_desc[8]; /* Copy of the flexible disk page */ - idefloppy_flexible_disk_page_t flexible_disk_page; + u8 flexible_disk_page[32]; /* Write protect */ int wp; /* Supports format progress report */ @@ -262,64 +165,40 @@ typedef struct ide_floppy_obj { #define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ -/* - * Floppy flag bits values. - */ -#define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */ -#define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */ -#define IDEFLOPPY_USE_READ12 2 /* Use READ12/WRITE12 or READ10/WRITE10 */ -#define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */ -#define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */ -#define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */ - -/* - * ATAPI floppy drive packet commands - */ -#define IDEFLOPPY_FORMAT_UNIT_CMD 0x04 -#define IDEFLOPPY_INQUIRY_CMD 0x12 -#define IDEFLOPPY_MODE_SELECT_CMD 0x55 -#define IDEFLOPPY_MODE_SENSE_CMD 0x5a -#define IDEFLOPPY_READ10_CMD 0x28 -#define IDEFLOPPY_READ12_CMD 0xa8 -#define IDEFLOPPY_READ_CAPACITY_CMD 0x23 -#define IDEFLOPPY_REQUEST_SENSE_CMD 0x03 -#define IDEFLOPPY_PREVENT_REMOVAL_CMD 0x1e -#define IDEFLOPPY_SEEK_CMD 0x2b -#define IDEFLOPPY_START_STOP_CMD 0x1b -#define IDEFLOPPY_TEST_UNIT_READY_CMD 0x00 -#define IDEFLOPPY_VERIFY_CMD 0x2f -#define IDEFLOPPY_WRITE10_CMD 0x2a -#define IDEFLOPPY_WRITE12_CMD 0xaa -#define IDEFLOPPY_WRITE_VERIFY_CMD 0x2e +/* Floppy flag bits values. */ +enum { + /* DRQ interrupt device */ + IDEFLOPPY_FLAG_DRQ_INTERRUPT = (1 << 0), + /* Media may have changed */ + IDEFLOPPY_FLAG_MEDIA_CHANGED = (1 << 1), + /* Format in progress */ + IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS = (1 << 2), + /* Avoid commands not supported in Clik drive */ + IDEFLOPPY_FLAG_CLIK_DRIVE = (1 << 3), + /* Requires BH algorithm for packets */ + IDEFLOPPY_FLAG_ZIP_DRIVE = (1 << 4), +}; -/* - * Defines for the mode sense command - */ +/* Defines for the MODE SENSE command */ #define MODE_SENSE_CURRENT 0x00 #define MODE_SENSE_CHANGEABLE 0x01 -#define MODE_SENSE_DEFAULT 0x02 +#define MODE_SENSE_DEFAULT 0x02 #define MODE_SENSE_SAVED 0x03 -/* - * IOCTLs used in low-level formatting. - */ - +/* IOCTLs used in low-level formatting. */ #define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600 #define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601 #define IDEFLOPPY_IOCTL_FORMAT_START 0x4602 #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603 -/* - * Error codes which are returned in rq->errors to the higher part - * of the driver. - */ +/* Error code returned in rq->errors to the higher part of the driver. */ #define IDEFLOPPY_ERROR_GENERAL 101 /* - * The following is used to format the general configuration word of - * the ATAPI IDENTIFY DEVICE command. + * The following is used to format the general configuration word of the + * ATAPI IDENTIFY DEVICE command. */ -struct idefloppy_id_gcw { +struct idefloppy_id_gcw { #if defined(__LITTLE_ENDIAN_BITFIELD) unsigned packet_size :2; /* Packet Size */ unsigned reserved234 :3; /* Reserved */ @@ -342,103 +221,12 @@ struct idefloppy_id_gcw { }; /* - * INQUIRY packet command - Data Format - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned device_type :5; /* Peripheral Device Type */ - unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */ - unsigned reserved1_6t0 :7; /* Reserved */ - unsigned rmb :1; /* Removable Medium Bit */ - unsigned ansi_version :3; /* ANSI Version */ - unsigned ecma_version :3; /* ECMA Version */ - unsigned iso_version :2; /* ISO Version */ - unsigned response_format :4; /* Response Data Format */ - unsigned reserved3_45 :2; /* Reserved */ - unsigned reserved3_6 :1; /* TrmIOP - Reserved */ - unsigned reserved3_7 :1; /* AENC - Reserved */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */ - unsigned device_type :5; /* Peripheral Device Type */ - unsigned rmb :1; /* Removable Medium Bit */ - unsigned reserved1_6t0 :7; /* Reserved */ - unsigned iso_version :2; /* ISO Version */ - unsigned ecma_version :3; /* ECMA Version */ - unsigned ansi_version :3; /* ANSI Version */ - unsigned reserved3_7 :1; /* AENC - Reserved */ - unsigned reserved3_6 :1; /* TrmIOP - Reserved */ - unsigned reserved3_45 :2; /* Reserved */ - unsigned response_format :4; /* Response Data Format */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 additional_length; /* Additional Length (total_length-4) */ - u8 rsv5, rsv6, rsv7; /* Reserved */ - u8 vendor_id[8]; /* Vendor Identification */ - u8 product_id[16]; /* Product Identification */ - u8 revision_level[4]; /* Revision Level */ - u8 vendor_specific[20]; /* Vendor Specific - Optional */ - u8 reserved56t95[40]; /* Reserved - Optional */ - /* Additional information may be returned */ -} idefloppy_inquiry_result_t; - -/* - * REQUEST SENSE packet command result - Data Format. - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned error_code :7; /* Current error (0x70) */ - unsigned valid :1; /* The information field conforms to SFF-8070i */ - u8 reserved1 :8; /* Reserved */ - unsigned sense_key :4; /* Sense Key */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned reserved2_67 :2; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned valid :1; /* The information field conforms to SFF-8070i */ - unsigned error_code :7; /* Current error (0x70) */ - u8 reserved1 :8; /* Reserved */ - unsigned reserved2_67 :2; - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned sense_key :4; /* Sense Key */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u32 information __attribute__ ((packed)); - u8 asl; /* Additional sense length (n-7) */ - u32 command_specific; /* Additional command specific information */ - u8 asc; /* Additional Sense Code */ - u8 ascq; /* Additional Sense Code Qualifier */ - u8 replaceable_unit_code; /* Field Replaceable Unit Code */ - u8 sksv[3]; - u8 pad[2]; /* Padding to 20 bytes */ -} idefloppy_request_sense_result_t; - -/* - * Pages of the SELECT SENSE / MODE SENSE packet commands. + * Pages of the SELECT SENSE / MODE SENSE packet commands. + * See SFF-8070i spec. */ #define IDEFLOPPY_CAPABILITIES_PAGE 0x1b #define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05 -/* - * Mode Parameter Header for the MODE SENSE packet command - */ -typedef struct { - u16 mode_data_length; /* Length of the following data transfer */ - u8 medium_type; /* Medium Type */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved3 :7; - unsigned wp :1; /* Write protect */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned wp :1; /* Write protect */ - unsigned reserved3 :7; -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 reserved[4]; -} idefloppy_mode_parameter_header_t; - static DEFINE_MUTEX(idefloppy_ref_mutex); #define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref) @@ -458,39 +246,35 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk) return floppy; } -static void ide_floppy_release(struct kref *); +static void idefloppy_cleanup_obj(struct kref *); static void ide_floppy_put(struct ide_floppy_obj *floppy) { mutex_lock(&idefloppy_ref_mutex); - kref_put(&floppy->kref, ide_floppy_release); + kref_put(&floppy->kref, idefloppy_cleanup_obj); mutex_unlock(&idefloppy_ref_mutex); } /* - * Too bad. The drive wants to send us data which we are not ready to accept. - * Just throw it away. + * Too bad. The drive wants to send us data which we are not ready to accept. + * Just throw it away. */ -static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount) +static void idefloppy_discard_data(ide_drive_t *drive, unsigned int bcount) { while (bcount--) (void) HWIF(drive)->INB(IDE_DATA_REG); } -#if IDEFLOPPY_DEBUG_BUGS -static void idefloppy_write_zeros (ide_drive_t *drive, unsigned int bcount) +static void idefloppy_write_zeros(ide_drive_t *drive, unsigned int bcount) { while (bcount--) HWIF(drive)->OUTB(0, IDE_DATA_REG); } -#endif /* IDEFLOPPY_DEBUG_BUGS */ /* - * idefloppy_do_end_request is used to finish servicing a request. - * - * For read/write requests, we will call ide_end_request to pass to the - * next buffer. + * Used to finish servicing a request. For read/write requests, we will call + * ide_end_request to pass to the next buffer. */ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) { @@ -498,12 +282,12 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) struct request *rq = HWGROUP(drive)->rq; int error; - debug_log(KERN_INFO "Reached idefloppy_end_request\n"); + debug_log("Reached %s\n", __func__); switch (uptodate) { - case 0: error = IDEFLOPPY_ERROR_GENERAL; break; - case 1: error = 0; break; - default: error = uptodate; + case 0: error = IDEFLOPPY_ERROR_GENERAL; break; + case 1: error = 0; break; + default: error = uptodate; } if (error) floppy->failed_pc = NULL; @@ -521,39 +305,8 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) return 0; } -static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount) -{ - struct request *rq = pc->rq; - struct bio_vec *bvec; - struct req_iterator iter; - unsigned long flags; - char *data; - int count, done = 0; - - rq_for_each_segment(bvec, rq, iter) { - if (!bcount) - break; - - count = min(bvec->bv_len, bcount); - - data = bvec_kmap_irq(bvec, &flags); - drive->hwif->atapi_input_bytes(drive, data, count); - bvec_kunmap_irq(data, &flags); - - bcount -= count; - pc->b_count += count; - done += count; - } - - idefloppy_do_end_request(drive, 1, done >> 9); - - if (bcount) { - printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers, bcount == %d\n", drive->name, bcount); - idefloppy_discard_data(drive, bcount); - } -} - -static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount) +static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc, + unsigned int bcount, int direction) { struct request *rq = pc->rq; struct req_iterator iter; @@ -569,7 +322,10 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un count = min(bvec->bv_len, bcount); data = bvec_kmap_irq(bvec, &flags); - drive->hwif->atapi_output_bytes(drive, data, count); + if (direction) + drive->hwif->atapi_output_bytes(drive, data, count); + else + drive->hwif->atapi_input_bytes(drive, data, count); bvec_kunmap_irq(data, &flags); bcount -= count; @@ -579,15 +335,18 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un idefloppy_do_end_request(drive, 1, done >> 9); -#if IDEFLOPPY_DEBUG_BUGS if (bcount) { - printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount); - idefloppy_write_zeros(drive, bcount); + printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n", + drive->name, __func__, bcount); + if (direction) + idefloppy_write_zeros(drive, bcount); + else + idefloppy_discard_data(drive, bcount); + } -#endif } -static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc) +static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc) { struct request *rq = pc->rq; struct bio *bio = rq->bio; @@ -597,11 +356,12 @@ static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc) } /* - * idefloppy_queue_pc_head generates a new packet command request in front - * of the request queue, before the current request, so that it will be - * processed immediately, on the next pass through the driver. + * Generate a new packet command request in front of the request queue, before + * the current request so that it will be processed immediately, on the next + * pass through the driver. */ -static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq) +static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc, + struct request *rq) { struct ide_floppy_obj *floppy = drive->driver_data; @@ -612,16 +372,16 @@ static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struc (void) ide_do_drive_cmd(drive, rq, ide_preempt); } -static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive) +static idefloppy_pc_t *idefloppy_next_pc_storage(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK) - floppy->pc_stack_index=0; + floppy->pc_stack_index = 0; return (&floppy->pc_stack[floppy->pc_stack_index++]); } -static struct request *idefloppy_next_rq_storage (ide_drive_t *drive) +static struct request *idefloppy_next_rq_storage(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -630,60 +390,53 @@ static struct request *idefloppy_next_rq_storage (ide_drive_t *drive) return (&floppy->rq_stack[floppy->rq_stack_index++]); } -/* - * idefloppy_analyze_error is called on each failed packet command retry - * to analyze the request sense. - */ -static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_result_t *result) +static void idefloppy_request_sense_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; + u8 *buf = floppy->pc->buffer; - floppy->sense_key = result->sense_key; - floppy->asc = result->asc; - floppy->ascq = result->ascq; - floppy->progress_indication = result->sksv[0] & 0x80 ? - (u16)get_unaligned((u16 *)(result->sksv+1)):0x10000; - if (floppy->failed_pc) - debug_log(KERN_INFO "ide-floppy: pc = %x, sense key = %x, " - "asc = %x, ascq = %x\n", floppy->failed_pc->c[0], - result->sense_key, result->asc, result->ascq); - else - debug_log(KERN_INFO "ide-floppy: sense key = %x, asc = %x, " - "ascq = %x\n", result->sense_key, - result->asc, result->ascq); -} - -static void idefloppy_request_sense_callback (ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; + debug_log("Reached %s\n", __func__); - debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__); - if (!floppy->pc->error) { - idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer); + floppy->sense_key = buf[2] & 0x0F; + floppy->asc = buf[12]; + floppy->ascq = buf[13]; + floppy->progress_indication = buf[15] & 0x80 ? + (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; + + if (floppy->failed_pc) + debug_log("pc = %x, sense key = %x, asc = %x," + " ascq = %x\n", + floppy->failed_pc->c[0], + floppy->sense_key, + floppy->asc, + floppy->ascq); + else + debug_log("sense key = %x, asc = %x, ascq = %x\n", + floppy->sense_key, + floppy->asc, + floppy->ascq); + + idefloppy_do_end_request(drive, 1, 0); } else { - printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting request!\n"); + printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting" + " request!\n"); idefloppy_do_end_request(drive, 0, 0); } } -/* - * General packet command callback function. - */ -static void idefloppy_pc_callback (ide_drive_t *drive) +/* General packet command callback function. */ +static void idefloppy_pc_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - - debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__); + + debug_log("Reached %s\n", __func__); idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0); } -/* - * idefloppy_init_pc initializes a packet command. - */ -static void idefloppy_init_pc (idefloppy_pc_t *pc) +static void idefloppy_init_pc(idefloppy_pc_t *pc) { memset(pc->c, 0, 12); pc->retries = 0; @@ -694,21 +447,20 @@ static void idefloppy_init_pc (idefloppy_pc_t *pc) pc->callback = &idefloppy_pc_callback; } -static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc) +static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc) { - idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_REQUEST_SENSE_CMD; + idefloppy_init_pc(pc); + pc->c[0] = GPCMD_REQUEST_SENSE; pc->c[4] = 255; pc->request_transfer = 18; pc->callback = &idefloppy_request_sense_callback; } /* - * idefloppy_retry_pc is called when an error was detected during the - * last packet command. We queue a request sense packet command in - * the head of the request list. + * Called when an error was detected during the last packet command. We queue a + * request sense packet command in the head of the request list. */ -static void idefloppy_retry_pc (ide_drive_t *drive) +static void idefloppy_retry_pc(ide_drive_t *drive) { idefloppy_pc_t *pc; struct request *rq; @@ -720,49 +472,50 @@ static void idefloppy_retry_pc (ide_drive_t *drive) idefloppy_queue_pc_head(drive, pc, rq); } -/* - * idefloppy_pc_intr is the usual interrupt handler which will be called - * during a packet command. - */ +/* The usual interrupt handler called during a packet command. */ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; idefloppy_pc_t *pc = floppy->pc; struct request *rq = pc->rq; + xfer_func_t *xferfunc; unsigned int temp; + int dma_error = 0; u16 bcount; u8 stat, ireason; - debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n", - __FUNCTION__); + debug_log("Reached %s interrupt handler\n", __func__); - if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { - if (HWIF(drive)->ide_dma_end(drive)) { - set_bit(PC_DMA_ERROR, &pc->flags); + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + dma_error = hwif->ide_dma_end(drive); + if (dma_error) { + printk(KERN_ERR "%s: DMA %s error\n", drive->name, + rq_data_dir(rq) ? "write" : "read"); + pc->flags |= PC_FLAG_DMA_ERROR; } else { pc->actually_transferred = pc->request_transfer; idefloppy_update_buffers(drive, pc); } - debug_log(KERN_INFO "ide-floppy: DMA finished\n"); + debug_log("DMA finished\n"); } /* Clear the interrupt */ stat = drive->hwif->INB(IDE_STATUS_REG); - if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ - debug_log(KERN_INFO "Packet command completed, %d bytes " - "transferred\n", pc->actually_transferred); - clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); + /* No more interrupts */ + if ((stat & DRQ_STAT) == 0) { + debug_log("Packet command completed, %d bytes transferred\n", + pc->actually_transferred); + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); - if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { /* Error detected */ - debug_log(KERN_INFO "ide-floppy: %s: I/O error\n", - drive->name); + debug_log("%s: I/O error\n", drive->name); rq->errors++; - if (pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD) { + if (pc->c[0] == GPCMD_REQUEST_SENSE) { printk(KERN_ERR "ide-floppy: I/O error in " "request sense command\n"); return ide_do_reset(drive); @@ -780,7 +533,8 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) return ide_stopped; } - if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; printk(KERN_ERR "ide-floppy: The floppy wants to issue " "more interrupts in DMA mode\n"); ide_dma_off(drive); @@ -794,10 +548,10 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) ireason = hwif->INB(IDE_IREASON_REG); if (ireason & CD) { - printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n"); + printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__); return ide_do_reset(drive); } - if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { + if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ printk(KERN_ERR "ide-floppy: We wanted to %s, ", (ireason & IO) ? "Write" : "Read"); @@ -805,7 +559,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } - if (!test_bit(PC_WRITING, &pc->flags)) { + if (!(pc->flags & PC_FLAG_WRITING)) { /* Reading - Check that we have enough space */ temp = pc->actually_transferred + bcount; if (temp > pc->request_transfer) { @@ -814,39 +568,34 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) "to send us more data than expected " "- discarding data\n"); idefloppy_discard_data(drive, bcount); - BUG_ON(HWGROUP(drive)->handler != NULL); + ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); return ide_started; } - debug_log(KERN_NOTICE "ide-floppy: The floppy wants to " - "send us more data than expected - " - "allowing transfer\n"); + debug_log("The floppy wants to send us more data than" + " expected - allowing transfer\n"); } } - if (test_bit(PC_WRITING, &pc->flags)) { - if (pc->buffer != NULL) - /* Write the current buffer */ - hwif->atapi_output_bytes(drive, pc->current_position, - bcount); - else - idefloppy_output_buffers(drive, pc, bcount); - } else { - if (pc->buffer != NULL) - /* Read the current buffer */ - hwif->atapi_input_bytes(drive, pc->current_position, - bcount); - else - idefloppy_input_buffers(drive, pc, bcount); - } + if (pc->flags & PC_FLAG_WRITING) + xferfunc = hwif->atapi_output_bytes; + else + xferfunc = hwif->atapi_input_bytes; + + if (pc->buffer) + xferfunc(drive, pc->current_position, bcount); + else + ide_floppy_io_buffers(drive, pc, bcount, + !!(pc->flags & PC_FLAG_WRITING)); + /* Update the current position */ pc->actually_transferred += bcount; pc->current_position += bcount; - BUG_ON(HWGROUP(drive)->handler != NULL); - ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* And set the interrupt handler again */ + /* And set the interrupt handler again */ + ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); return ide_started; } @@ -855,7 +604,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) * It fails at high speeds on the Iomega ZIP drive, so there's a slower version * for that drive below. The algorithm is chosen based on drive type */ -static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) +static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) { ide_startstop_t startstop; idefloppy_floppy_t *floppy = drive->driver_data; @@ -872,7 +621,7 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) "issuing a packet command\n"); return ide_do_reset(drive); } - BUG_ON(HWGROUP(drive)->handler != NULL); + /* Set the interrupt routine */ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* Send the actual packet */ @@ -882,18 +631,16 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) /* - * What we have here is a classic case of a top half / bottom half - * interrupt service routine. In interrupt mode, the device sends - * an interrupt to signal it's ready to receive a packet. However, - * we need to delay about 2-3 ticks before issuing the packet or we - * gets in trouble. + * What we have here is a classic case of a top half / bottom half interrupt + * service routine. In interrupt mode, the device sends an interrupt to signal + * that it is ready to receive a packet. However, we need to delay about 2-3 + * ticks before issuing the packet or we gets in trouble. * - * So, follow carefully. transfer_pc1 is called as an interrupt (or - * directly). In either case, when the device says it's ready for a - * packet, we schedule the packet transfer to occur about 2-3 ticks - * later in transfer_pc2. + * So, follow carefully. transfer_pc1 is called as an interrupt (or directly). + * In either case, when the device says it's ready for a packet, we schedule + * the packet transfer to occur about 2-3 ticks later in transfer_pc2. */ -static int idefloppy_transfer_pc2 (ide_drive_t *drive) +static int idefloppy_transfer_pc2(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -903,7 +650,7 @@ static int idefloppy_transfer_pc2 (ide_drive_t *drive) return IDEFLOPPY_WAIT_CMD; } -static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) +static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_startstop_t startstop; @@ -920,7 +667,7 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) "while issuing a packet command\n"); return ide_do_reset(drive); } - /* + /* * The following delay solves a problem with ATAPI Zip 100 drives * where the Busy flag was apparently being deasserted before the * unit was ready to receive data. This was happening on a @@ -928,32 +675,30 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) * 40 and 50msec work well. idefloppy_pc_intr will not be actually * used until after the packet is moved in about 50 msec. */ - BUG_ON(HWGROUP(drive)->handler != NULL); - ide_set_handler(drive, - &idefloppy_pc_intr, /* service routine for packet command */ - floppy->ticks, /* wait this long before "failing" */ - &idefloppy_transfer_pc2); /* fail == transfer_pc2 */ + + ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks, + &idefloppy_transfer_pc2); return ide_started; } -/** - * idefloppy_should_report_error() - * - * Supresses error messages resulting from Medium not present - */ -static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy) +static void ide_floppy_report_error(idefloppy_floppy_t *floppy, + idefloppy_pc_t *pc) { + /* supress error messages resulting from Medium not present */ if (floppy->sense_key == 0x02 && floppy->asc == 0x3a && floppy->ascq == 0x00) - return 0; - return 1; + return; + + printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, " + "asc = %2x, ascq = %2x\n", + floppy->drive->name, pc->c[0], floppy->sense_key, + floppy->asc, floppy->ascq); + } -/* - * Issue a packet command - */ -static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc) +static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, + idefloppy_pc_t *pc) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; @@ -962,36 +707,23 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p u8 dma; if (floppy->failed_pc == NULL && - pc->c[0] != IDEFLOPPY_REQUEST_SENSE_CMD) + pc->c[0] != GPCMD_REQUEST_SENSE) floppy->failed_pc = pc; /* Set the current packet command */ floppy->pc = pc; - if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES || - test_bit(PC_ABORT, &pc->flags)) { - /* - * We will "abort" retrying a packet command in case - * a legitimate error code was received. - */ - if (!test_bit(PC_ABORT, &pc->flags)) { - if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) { - if (idefloppy_should_report_error(floppy)) - printk(KERN_ERR "ide-floppy: %s: I/O error, " - "pc = %2x, key = %2x, " - "asc = %2x, ascq = %2x\n", - drive->name, pc->c[0], - floppy->sense_key, - floppy->asc, floppy->ascq); - } - /* Giving up */ - pc->error = IDEFLOPPY_ERROR_GENERAL; - } + if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { + if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) + ide_floppy_report_error(floppy, pc); + /* Giving up */ + pc->error = IDEFLOPPY_ERROR_GENERAL; + floppy->failed_pc = NULL; pc->callback(drive); return ide_stopped; } - debug_log(KERN_INFO "Retry number - %d\n",pc->retries); + debug_log("Retry number - %d\n", pc->retries); pc->retries++; /* We haven't transferred any data yet */ @@ -999,24 +731,26 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p pc->current_position = pc->buffer; bcount = min(pc->request_transfer, 63 * 1024); - if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) + if (pc->flags & PC_FLAG_DMA_ERROR) { + pc->flags &= ~PC_FLAG_DMA_ERROR; ide_dma_off(drive); - + } dma = 0; - if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) + if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) dma = !hwif->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | IDE_TFLAG_OUT_DEVICE, bcount, dma); - if (dma) { /* Begin DMA, if necessary */ - set_bit(PC_DMA_IN_PROGRESS, &pc->flags); + if (dma) { + /* Begin DMA, if necessary */ + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; hwif->dma_start(drive); } /* Can we transfer the packet when we get the interrupt or wait? */ - if (test_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags)) { + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { /* wait */ pkt_xfer_routine = &idefloppy_transfer_pc1; } else { @@ -1024,7 +758,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p pkt_xfer_routine = &idefloppy_transfer_pc; } - if (test_bit (IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) { + if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ ide_execute_command(drive, WIN_PACKETCMD, pkt_xfer_routine, @@ -1038,38 +772,37 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p } } -static void idefloppy_rw_callback (ide_drive_t *drive) +static void idefloppy_rw_callback(ide_drive_t *drive) { - debug_log(KERN_INFO "ide-floppy: Reached idefloppy_rw_callback\n"); + debug_log("Reached %s\n", __func__); idefloppy_do_end_request(drive, 1, 0); return; } -static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent) +static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent) { - debug_log(KERN_INFO "ide-floppy: creating prevent removal command, " - "prevent = %d\n", prevent); + debug_log("creating prevent removal command, prevent = %d\n", prevent); idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_PREVENT_REMOVAL_CMD; + pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; pc->c[4] = prevent; } -static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc) +static void idefloppy_create_read_capacity_cmd(idefloppy_pc_t *pc) { idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_READ_CAPACITY_CMD; + pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; pc->c[7] = 255; pc->c[8] = 255; pc->request_transfer = 255; } -static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, +static void idefloppy_create_format_unit_cmd(idefloppy_pc_t *pc, int b, int l, int flags) { idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_FORMAT_UNIT_CMD; + pc->c[0] = GPCMD_FORMAT_UNIT; pc->c[1] = 0x17; memset(pc->buffer, 0, 12); @@ -1080,83 +813,79 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, pc->buffer[1] ^= 0x20; /* ... turn off DCRT bit */ pc->buffer[3] = 8; - put_unaligned(htonl(b), (unsigned int *)(&pc->buffer[4])); - put_unaligned(htonl(l), (unsigned int *)(&pc->buffer[8])); - pc->buffer_size=12; - set_bit(PC_WRITING, &pc->flags); + put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4])); + put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8])); + pc->buffer_size = 12; + pc->flags |= PC_FLAG_WRITING; } -/* - * A mode sense command is used to "sense" floppy parameters. - */ -static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type) +/* A mode sense command is used to "sense" floppy parameters. */ +static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code, + u8 type) { - u16 length = sizeof(idefloppy_mode_parameter_header_t); - + u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ + idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_MODE_SENSE_CMD; + pc->c[0] = GPCMD_MODE_SENSE_10; pc->c[1] = 0; pc->c[2] = page_code + (type << 6); switch (page_code) { - case IDEFLOPPY_CAPABILITIES_PAGE: - length += 12; - break; - case IDEFLOPPY_FLEXIBLE_DISK_PAGE: - length += 32; - break; - default: - printk(KERN_ERR "ide-floppy: unsupported page code " + case IDEFLOPPY_CAPABILITIES_PAGE: + length += 12; + break; + case IDEFLOPPY_FLEXIBLE_DISK_PAGE: + length += 32; + break; + default: + printk(KERN_ERR "ide-floppy: unsupported page code " "in create_mode_sense_cmd\n"); } - put_unaligned(htons(length), (u16 *) &pc->c[7]); + put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); pc->request_transfer = length; } -static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start) +static void idefloppy_create_start_stop_cmd(idefloppy_pc_t *pc, int start) { idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_START_STOP_CMD; + pc->c[0] = GPCMD_START_STOP_UNIT; pc->c[4] = start; } static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc) { idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_TEST_UNIT_READY_CMD; + pc->c[0] = GPCMD_TEST_UNIT_READY; } -static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector) +static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, + idefloppy_pc_t *pc, struct request *rq, + unsigned long sector) { int block = sector / floppy->bs_factor; int blocks = rq->nr_sectors / floppy->bs_factor; int cmd = rq_data_dir(rq); - debug_log("create_rw1%d_cmd: block == %d, blocks == %d\n", - 2 * test_bit (IDEFLOPPY_USE_READ12, &floppy->flags), + debug_log("create_rw10_cmd: block == %d, blocks == %d\n", block, blocks); idefloppy_init_pc(pc); - if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) { - pc->c[0] = cmd == READ ? IDEFLOPPY_READ12_CMD : IDEFLOPPY_WRITE12_CMD; - put_unaligned(htonl(blocks), (unsigned int *) &pc->c[6]); - } else { - pc->c[0] = cmd == READ ? IDEFLOPPY_READ10_CMD : IDEFLOPPY_WRITE10_CMD; - put_unaligned(htons(blocks), (unsigned short *) &pc->c[7]); - } - put_unaligned(htonl(block), (unsigned int *) &pc->c[2]); + pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; + put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); + put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); + pc->callback = &idefloppy_rw_callback; pc->rq = rq; pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; if (rq->cmd_flags & REQ_RW) - set_bit(PC_WRITING, &pc->flags); + pc->flags |= PC_FLAG_WRITING; pc->buffer = NULL; pc->request_transfer = pc->buffer_size = blocks * floppy->block_size; - set_bit(PC_DMA_RECOMMENDED, &pc->flags); + pc->flags |= PC_FLAG_DMA_RECOMMENDED; } -static void -idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq) +static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, + idefloppy_pc_t *pc, struct request *rq) { idefloppy_init_pc(pc); pc->callback = &idefloppy_rw_callback; @@ -1164,11 +893,10 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req pc->rq = rq; pc->b_count = rq->data_len; if (rq->data_len && rq_data_dir(rq) == WRITE) - set_bit(PC_WRITING, &pc->flags); + pc->flags |= PC_FLAG_WRITING; pc->buffer = rq->data; if (rq->bio) - set_bit(PC_DMA_RECOMMENDED, &pc->flags); - + pc->flags |= PC_FLAG_DMA_RECOMMENDED; /* * possibly problematic, doesn't look like ide-floppy correctly * handled scattered requests if dma fails... @@ -1176,30 +904,23 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req pc->request_transfer = pc->buffer_size = rq->data_len; } -/* - * idefloppy_do_request is our request handling function. - */ -static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s) +static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, + struct request *rq, sector_t block_s) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t *pc; unsigned long block = (unsigned long)block_s; - debug_log(KERN_INFO "dev: %s, flags: %lx, errors: %d\n", + debug_log("dev: %s, cmd_type: %x, errors: %d\n", rq->rq_disk ? rq->rq_disk->disk_name : "?", - rq->flags, rq->errors); - debug_log(KERN_INFO "sector: %ld, nr_sectors: %ld, " + rq->cmd_type, rq->errors); + debug_log("sector: %ld, nr_sectors: %ld, " "current_nr_sectors: %d\n", (long)rq->sector, rq->nr_sectors, rq->current_nr_sectors); if (rq->errors >= ERROR_MAX) { - if (floppy->failed_pc != NULL) { - if (idefloppy_should_report_error(floppy)) - printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x," - " key = %2x, asc = %2x, ascq = %2x\n", - drive->name, floppy->failed_pc->c[0], - floppy->sense_key, floppy->asc, floppy->ascq); - } + if (floppy->failed_pc) + ide_floppy_report_error(floppy, floppy->failed_pc); else printk(KERN_ERR "ide-floppy: %s: I/O error\n", drive->name); @@ -1209,8 +930,8 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request if (blk_fs_request(rq)) { if (((long)rq->sector % floppy->bs_factor) || (rq->nr_sectors % floppy->bs_factor)) { - printk("%s: unsupported r/w request size\n", - drive->name); + printk(KERN_ERR "%s: unsupported r/w request size\n", + drive->name); idefloppy_do_end_request(drive, 0, 0); return ide_stopped; } @@ -1233,15 +954,15 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request } /* - * idefloppy_queue_pc_tail adds a special packet command request to the - * tail of the request queue, and waits for it to be serviced. + * Add a special packet command request to the tail of the request queue, + * and wait for it to be serviced. */ -static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc) +static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc) { struct ide_floppy_obj *floppy = drive->driver_data; struct request rq; - ide_init_drive_cmd (&rq); + ide_init_drive_cmd(&rq); rq.buffer = (char *) pc; rq.cmd_type = REQ_TYPE_SPECIAL; rq.rq_disk = floppy->disk; @@ -1250,88 +971,90 @@ static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc) } /* - * Look at the flexible disk page parameters. We will ignore the CHS - * capacity parameters and use the LBA parameters instead. + * Look at the flexible disk page parameters. We ignore the CHS capacity + * parameters and use the LBA parameters instead. */ -static int idefloppy_get_flexible_disk_page (ide_drive_t *drive) +static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t pc; - idefloppy_mode_parameter_header_t *header; - idefloppy_flexible_disk_page_t *page; + u8 *page; int capacity, lba_capacity; + u16 transfer_rate, sector_size, cyls, rpm; + u8 heads, sectors; + + idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, + MODE_SENSE_CURRENT); - idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, MODE_SENSE_CURRENT); - if (idefloppy_queue_pc_tail(drive,&pc)) { - printk(KERN_ERR "ide-floppy: Can't get flexible disk " - "page parameters\n"); + if (idefloppy_queue_pc_tail(drive, &pc)) { + printk(KERN_ERR "ide-floppy: Can't get flexible disk page" + " parameters\n"); return 1; } - header = (idefloppy_mode_parameter_header_t *) pc.buffer; - floppy->wp = header->wp; + floppy->wp = !!(pc.buffer[3] & 0x80); set_disk_ro(floppy->disk, floppy->wp); - page = (idefloppy_flexible_disk_page_t *) (header + 1); - - page->transfer_rate = ntohs(page->transfer_rate); - page->sector_size = ntohs(page->sector_size); - page->cyls = ntohs(page->cyls); - page->rpm = ntohs(page->rpm); - capacity = page->cyls * page->heads * page->sectors * page->sector_size; - if (memcmp (page, &floppy->flexible_disk_page, sizeof (idefloppy_flexible_disk_page_t))) + page = &pc.buffer[8]; + + transfer_rate = be16_to_cpu(*(u16 *)&pc.buffer[8 + 2]); + sector_size = be16_to_cpu(*(u16 *)&pc.buffer[8 + 6]); + cyls = be16_to_cpu(*(u16 *)&pc.buffer[8 + 8]); + rpm = be16_to_cpu(*(u16 *)&pc.buffer[8 + 28]); + heads = pc.buffer[8 + 4]; + sectors = pc.buffer[8 + 5]; + + capacity = cyls * heads * sectors * sector_size; + + if (memcmp(page, &floppy->flexible_disk_page, 32)) printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, " "%d sector size, %d rpm\n", - drive->name, capacity / 1024, page->cyls, - page->heads, page->sectors, - page->transfer_rate / 8, page->sector_size, page->rpm); - - floppy->flexible_disk_page = *page; - drive->bios_cyl = page->cyls; - drive->bios_head = page->heads; - drive->bios_sect = page->sectors; + drive->name, capacity / 1024, cyls, heads, + sectors, transfer_rate / 8, sector_size, rpm); + + memcpy(&floppy->flexible_disk_page, page, 32); + drive->bios_cyl = cyls; + drive->bios_head = heads; + drive->bios_sect = sectors; lba_capacity = floppy->blocks * floppy->block_size; + if (capacity < lba_capacity) { printk(KERN_NOTICE "%s: The disk reports a capacity of %d " "bytes, but the drive only handles %d\n", drive->name, lba_capacity, capacity); - floppy->blocks = floppy->block_size ? capacity / floppy->block_size : 0; + floppy->blocks = floppy->block_size ? + capacity / floppy->block_size : 0; } return 0; } -static int idefloppy_get_capability_page(ide_drive_t *drive) +static int idefloppy_get_sfrp_bit(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t pc; - idefloppy_mode_parameter_header_t *header; - idefloppy_capabilities_page_t *page; floppy->srfp = 0; idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE, MODE_SENSE_CURRENT); - set_bit(PC_SUPPRESS_ERROR, &pc.flags); - if (idefloppy_queue_pc_tail(drive,&pc)) { + pc.flags |= PC_FLAG_SUPPRESS_ERROR; + if (idefloppy_queue_pc_tail(drive, &pc)) return 1; - } - header = (idefloppy_mode_parameter_header_t *) pc.buffer; - page= (idefloppy_capabilities_page_t *)(header+1); - floppy->srfp = page->srfp; + floppy->srfp = pc.buffer[8 + 2] & 0x40; return (0); } /* - * Determine if a media is present in the floppy drive, and if so, - * its LBA capacity. + * Determine if a media is present in the floppy drive, and if so, its LBA + * capacity. */ -static int idefloppy_get_capacity (ide_drive_t *drive) +static int ide_floppy_get_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t pc; - idefloppy_capacity_header_t *header; - idefloppy_capacity_descriptor_t *descriptor; - int i, descriptors, rc = 1, blocks, length; - + u8 *cap_desc; + u8 header_len, desc_cnt; + int i, rc = 1, blocks, length; + drive->bios_cyl = 0; drive->bios_head = drive->bios_sect = 0; floppy->blocks = 0; @@ -1343,44 +1066,55 @@ static int idefloppy_get_capacity (ide_drive_t *drive) printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); return 1; } - header = (idefloppy_capacity_header_t *) pc.buffer; - descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t); - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); + header_len = pc.buffer[3]; + cap_desc = &pc.buffer[4]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ + + for (i = 0; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; + + blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]); - for (i = 0; i < descriptors; i++, descriptor++) { - blocks = descriptor->blocks = ntohl(descriptor->blocks); - length = descriptor->length = ntohs(descriptor->length); + debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", + i, blocks * length / 1024, blocks, length); - if (!i) - { - switch (descriptor->dc) { + if (i) + continue; + /* + * the code below is valid only for the 1st descriptor, ie i=0 + */ + + switch (pc.buffer[desc_start + 4] & 0x03) { /* Clik! drive returns this instead of CAPACITY_CURRENT */ case CAPACITY_UNFORMATTED: - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) - /* + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) + /* * If it is not a clik drive, break out * (maintains previous driver behaviour) */ break; case CAPACITY_CURRENT: /* Normal Zip/LS-120 disks */ - if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t))) + if (memcmp(cap_desc, &floppy->cap_desc, 8)) printk(KERN_INFO "%s: %dkB, %d blocks, %d " "sector size\n", drive->name, blocks * length / 1024, blocks, length); - floppy->capacity = *descriptor; + memcpy(&floppy->cap_desc, cap_desc, 8); + if (!length || length % 512) { printk(KERN_NOTICE "%s: %d bytes block size " "not supported\n", drive->name, length); } else { - floppy->blocks = blocks; - floppy->block_size = length; - if ((floppy->bs_factor = length / 512) != 1) - printk(KERN_NOTICE "%s: warning: non " + floppy->blocks = blocks; + floppy->block_size = length; + floppy->bs_factor = length / 512; + if (floppy->bs_factor != 1) + printk(KERN_NOTICE "%s: warning: non " "512 bytes block size not " "fully supported\n", drive->name); - rc = 0; + rc = 0; } break; case CAPACITY_NO_CARTRIDGE: @@ -1395,54 +1129,42 @@ static int idefloppy_get_capacity (ide_drive_t *drive) "in drive\n", drive->name); break; } - } - if (!i) { - debug_log( "Descriptor 0 Code: %d\n", - descriptor->dc); - } - debug_log( "Descriptor %d: %dkB, %d blocks, %d " - "sector size\n", i, blocks * length / 1024, blocks, - length); + debug_log("Descriptor 0 Code: %d\n", + pc.buffer[desc_start + 4] & 0x03); } /* Clik! disk does not support get_flexible_disk_page */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { - (void) idefloppy_get_flexible_disk_page(drive); - } + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) + (void) ide_floppy_get_flexible_disk_page(drive); set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); return rc; } /* -** Obtain the list of formattable capacities. -** Very similar to idefloppy_get_capacity, except that we push the capacity -** descriptors to userland, instead of our own structures. -** -** Userland gives us the following structure: -** -** struct idefloppy_format_capacities { -** int nformats; -** struct { -** int nblocks; -** int blocksize; -** } formats[]; -** } ; -** -** userland initializes nformats to the number of allocated formats[] -** records. On exit we set nformats to the number of records we've -** actually initialized. -** -*/ - -static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) + * Obtain the list of formattable capacities. + * Very similar to ide_floppy_get_capacity, except that we push the capacity + * descriptors to userland, instead of our own structures. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_capacities { + * int nformats; + * struct { + * int nblocks; + * int blocksize; + * } formats[]; + * }; + * + * userland initializes nformats to the number of allocated formats[] records. + * On exit we set nformats to the number of records we've actually initialized. + */ + +static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) { - idefloppy_pc_t pc; - idefloppy_capacity_header_t *header; - idefloppy_capacity_descriptor_t *descriptor; - int i, descriptors, blocks, length; - int u_array_size; - int u_index; + idefloppy_pc_t pc; + u8 header_len, desc_cnt; + int i, blocks, length, u_array_size, u_index; int __user *argp; if (get_user(u_array_size, arg)) @@ -1454,30 +1176,27 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) idefloppy_create_read_capacity_cmd(&pc); if (idefloppy_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); - return (-EIO); - } - header = (idefloppy_capacity_header_t *) pc.buffer; - descriptors = header->length / - sizeof(idefloppy_capacity_descriptor_t); - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); + return (-EIO); + } + header_len = pc.buffer[3]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ u_index = 0; argp = arg + 1; /* - ** We always skip the first capacity descriptor. That's the - ** current capacity. We are interested in the remaining descriptors, - ** the formattable capacities. - */ + * We always skip the first capacity descriptor. That's the current + * capacity. We are interested in the remaining descriptors, the + * formattable capacities. + */ + for (i = 1; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; - for (i=0; i<descriptors; i++, descriptor++) { if (u_index >= u_array_size) break; /* User-supplied buffer too small */ - if (i == 0) - continue; /* Skip the first descriptor */ - blocks = ntohl(descriptor->blocks); - length = ntohs(descriptor->length); + blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]); if (put_user(blocks, argp)) return(-EFAULT); @@ -1496,53 +1215,14 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) } /* -** Send ATAPI_FORMAT_UNIT to the drive. -** -** Userland gives us the following structure: -** -** struct idefloppy_format_command { -** int nblocks; -** int blocksize; -** int flags; -** } ; -** -** flags is a bitmask, currently, the only defined flag is: -** -** 0x01 - verify media after format. -*/ - -static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg) -{ - int blocks; - int length; - int flags; - idefloppy_pc_t pc; - - if (get_user(blocks, arg) || - get_user(length, arg+1) || - get_user(flags, arg+2)) { - return (-EFAULT); - } - - /* Get the SFRP bit */ - (void) idefloppy_get_capability_page(drive); - idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); - if (idefloppy_queue_pc_tail(drive, &pc)) { - return (-EIO); - } - - return (0); -} - -/* -** Get ATAPI_FORMAT_UNIT progress indication. -** -** Userland gives a pointer to an int. The int is set to a progress -** indicator 0-65536, with 65536=100%. -** -** If the drive does not support format progress indication, we just check -** the dsc bit, and return either 0 or 65536. -*/ + * Get ATAPI_FORMAT_UNIT progress indication. + * + * Userland gives a pointer to an int. The int is set to a progress + * indicator 0-65536, with 65536=100%. + * + * If the drive does not support format progress indication, we just check + * the dsc bit, and return either 0 or 65536. + */ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) { @@ -1552,17 +1232,15 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) if (floppy->srfp) { idefloppy_create_request_sense_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) { + if (idefloppy_queue_pc_tail(drive, &pc)) return (-EIO); - } if (floppy->sense_key == 2 && floppy->asc == 4 && - floppy->ascq == 4) { + floppy->ascq == 4) progress_indication = floppy->progress_indication; - } - /* Else assume format_unit has finished, and we're - ** at 0x10000 */ + + /* Else assume format_unit has finished, and we're at 0x10000 */ } else { unsigned long flags; u8 stat; @@ -1579,10 +1257,7 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) return (0); } -/* - * Return the current floppy capacity. - */ -static sector_t idefloppy_capacity (ide_drive_t *drive) +static sector_t idefloppy_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; unsigned long capacity = floppy->blocks * floppy->bs_factor; @@ -1591,15 +1266,12 @@ static sector_t idefloppy_capacity (ide_drive_t *drive) } /* - * idefloppy_identify_device checks if we can support a drive, - * based on the ATAPI IDENTIFY command results. + * Check whether we can support a drive, based on the ATAPI IDENTIFY command + * results. */ -static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) +static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id) { struct idefloppy_id_gcw gcw; -#if IDEFLOPPY_DEBUG_INFO - char buffer[80]; -#endif /* IDEFLOPPY_DEBUG_INFO */ *((u16 *) &gcw) = id->config; @@ -1608,54 +1280,23 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) if ((gcw.device_type == 5) && !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP")) - gcw.device_type = 0; + gcw.device_type = 0; #endif -#if IDEFLOPPY_DEBUG_INFO - printk(KERN_INFO "Dumping ATAPI Identify Device floppy parameters\n"); - switch (gcw.protocol) { - case 0: case 1: sprintf(buffer, "ATA");break; - case 2: sprintf(buffer, "ATAPI");break; - case 3: sprintf(buffer, "Reserved (Unknown to ide-floppy)");break; - } - printk(KERN_INFO "Protocol Type: %s\n", buffer); - switch (gcw.device_type) { - case 0: sprintf(buffer, "Direct-access Device");break; - case 1: sprintf(buffer, "Streaming Tape Device");break; - case 2: case 3: case 4: sprintf (buffer, "Reserved");break; - case 5: sprintf(buffer, "CD-ROM Device");break; - case 6: sprintf(buffer, "Reserved"); - case 7: sprintf(buffer, "Optical memory Device");break; - case 0x1f: sprintf(buffer, "Unknown or no Device type");break; - default: sprintf(buffer, "Reserved"); - } - printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer); - printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No"); - switch (gcw.drq_type) { - case 0: sprintf(buffer, "Microprocessor DRQ");break; - case 1: sprintf(buffer, "Interrupt DRQ");break; - case 2: sprintf(buffer, "Accelerated DRQ");break; - case 3: sprintf(buffer, "Reserved");break; - } - printk(KERN_INFO "Command Packet DRQ Type: %s\n", buffer); - switch (gcw.packet_size) { - case 0: sprintf(buffer, "12 bytes");break; - case 1: sprintf(buffer, "16 bytes");break; - default: sprintf(buffer, "Reserved");break; - } - printk(KERN_INFO "Command Packet Size: %s\n", buffer); -#endif /* IDEFLOPPY_DEBUG_INFO */ - if (gcw.protocol != 2) - printk(KERN_ERR "ide-floppy: Protocol is not ATAPI\n"); + printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n", + gcw.protocol); else if (gcw.device_type != 0) - printk(KERN_ERR "ide-floppy: Device type is not set to floppy\n"); + printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set " + "to floppy\n", gcw.device_type); else if (!gcw.removable) printk(KERN_ERR "ide-floppy: The removable flag is not set\n"); else if (gcw.drq_type == 3) { - printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type); + printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not " + "supported\n", gcw.drq_type); } else if (gcw.packet_size != 0) { - printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n"); + printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 " + "bytes long\n", gcw.packet_size); } else return 1; return 0; @@ -1666,59 +1307,53 @@ static void idefloppy_add_settings(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; -/* - * drive setting name read/write data type min max mul_factor div_factor data pointer set function - */ - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); - ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL); + ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, + &drive->bios_cyl, NULL); + ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, + &drive->bios_head, NULL); + ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, + &drive->bios_sect, NULL); + ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, + &floppy->ticks, NULL); } #else static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } #endif -/* - * Driver initialization. - */ -static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) +static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) { struct idefloppy_id_gcw gcw; *((u16 *) &gcw) = drive->id->config; floppy->pc = floppy->pc_stack; if (gcw.drq_type == 1) - set_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT; /* - * We used to check revisions here. At this point however - * I'm giving up. Just assume they are all broken, its easier. + * We used to check revisions here. At this point however I'm giving up. + * Just assume they are all broken, its easier. * - * The actual reason for the workarounds was likely - * a driver bug after all rather than a firmware bug, - * and the workaround below used to hide it. It should - * be fixed as of version 1.9, but to be on the safe side - * we'll leave the limitation below for the 2.2.x tree. + * The actual reason for the workarounds was likely a driver bug after + * all rather than a firmware bug, and the workaround below used to hide + * it. It should be fixed as of version 1.9, but to be on the safe side + * we'll leave the limitation below for the 2.2.x tree. */ - if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) { - set_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE; /* This value will be visible in the /proc/ide/hdx/settings */ floppy->ticks = IDEFLOPPY_TICKS_DELAY; blk_queue_max_sectors(drive->queue, 64); } /* - * Guess what? The IOMEGA Clik! drive also needs the - * above fix. It makes nasty clicking noises without - * it, so please don't remove this. - */ + * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes + * nasty clicking noises without it, so please don't remove this. + */ if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) { blk_queue_max_sectors(drive->queue, 64); - set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE; } - - (void) idefloppy_get_capacity(drive); + (void) ide_floppy_get_capacity(drive); idefloppy_add_settings(drive); } @@ -1734,7 +1369,7 @@ static void ide_floppy_remove(ide_drive_t *drive) ide_floppy_put(floppy); } -static void ide_floppy_release(struct kref *kref) +static void idefloppy_cleanup_obj(struct kref *kref) { struct ide_floppy_obj *floppy = to_ide_floppy(kref); ide_drive_t *drive = floppy->drive; @@ -1747,19 +1382,19 @@ static void ide_floppy_release(struct kref *kref) } #ifdef CONFIG_IDE_PROC_FS -static int proc_idefloppy_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, + int count, int *eof, void *data) { ide_drive_t*drive = (ide_drive_t *)data; int len; - len = sprintf(page,"%llu\n", (long long)idefloppy_capacity(drive)); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive)); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static ide_proc_entry_t idefloppy_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, + { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, + { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, { NULL, 0, NULL, NULL } }; #endif /* CONFIG_IDE_PROC_FS */ @@ -1794,9 +1429,10 @@ static int idefloppy_open(struct inode *inode, struct file *filp) idefloppy_pc_t pc; int ret = 0; - debug_log(KERN_INFO "Reached idefloppy_open\n"); + debug_log("Reached %s\n", __func__); - if (!(floppy = ide_floppy_get(disk))) + floppy = ide_floppy_get(disk); + if (!floppy) return -ENXIO; drive = floppy->drive; @@ -1804,7 +1440,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp) floppy->openers++; if (floppy->openers == 1) { - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; /* Just in case */ idefloppy_create_test_unit_ready_cmd(&pc); @@ -1813,13 +1449,13 @@ static int idefloppy_open(struct inode *inode, struct file *filp) (void) idefloppy_queue_pc_tail(drive, &pc); } - if (idefloppy_get_capacity (drive) + if (ide_floppy_get_capacity(drive) && (filp->f_flags & O_NDELAY) == 0 /* - ** Allow O_NDELAY to open a drive without a disk, or with - ** an unreadable disk, so that we can get the format - ** capacity of the drive or begin the format - Sam - */ + * Allow O_NDELAY to open a drive without a disk, or with an + * unreadable disk, so that we can get the format capacity + * of the drive or begin the format - Sam + */ ) { ret = -EIO; goto out_put_floppy; @@ -1829,14 +1465,14 @@ static int idefloppy_open(struct inode *inode, struct file *filp) ret = -EROFS; goto out_put_floppy; } - set_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_MEDIA_CHANGED; /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { idefloppy_create_prevent_cmd(&pc, 1); (void) idefloppy_queue_pc_tail(drive, &pc); } check_disk_change(inode->i_bdev); - } else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) { + } else if (floppy->flags & IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS) { ret = -EBUSY; goto out_put_floppy; } @@ -1854,17 +1490,17 @@ static int idefloppy_release(struct inode *inode, struct file *filp) struct ide_floppy_obj *floppy = ide_floppy_g(disk); ide_drive_t *drive = floppy->drive; idefloppy_pc_t pc; - - debug_log(KERN_INFO "Reached idefloppy_release\n"); + + debug_log("Reached %s\n", __func__); if (floppy->openers == 1) { /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { idefloppy_create_prevent_cmd(&pc, 0); (void) idefloppy_queue_pc_tail(drive, &pc); } - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; } floppy->openers--; @@ -1885,64 +1521,105 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } +static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, + unsigned long arg, unsigned int cmd) +{ + if (floppy->openers > 1) + return -EBUSY; + + /* The IOMEGA Clik! Drive doesn't support this command - + * no room for an eject mechanism */ + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { + int prevent = arg ? 1 : 0; + + if (cmd == CDROMEJECT) + prevent = 0; + + idefloppy_create_prevent_cmd(pc, prevent); + (void) idefloppy_queue_pc_tail(floppy->drive, pc); + } + + if (cmd == CDROMEJECT) { + idefloppy_create_start_stop_cmd(pc, 2); + (void) idefloppy_queue_pc_tail(floppy->drive, pc); + } + + return 0; +} + +static int ide_floppy_format_unit(idefloppy_floppy_t *floppy, + int __user *arg) +{ + int blocks, length, flags, err = 0; + idefloppy_pc_t pc; + + if (floppy->openers > 1) { + /* Don't format if someone is using the disk */ + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; + return -EBUSY; + } + + floppy->flags |= IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; + + /* + * Send ATAPI_FORMAT_UNIT to the drive. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_command { + * int nblocks; + * int blocksize; + * int flags; + * } ; + * + * flags is a bitmask, currently, the only defined flag is: + * + * 0x01 - verify media after format. + */ + if (get_user(blocks, arg) || + get_user(length, arg+1) || + get_user(flags, arg+2)) { + err = -EFAULT; + goto out; + } + + (void) idefloppy_get_sfrp_bit(floppy->drive); + idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); + + if (idefloppy_queue_pc_tail(floppy->drive, &pc)) + err = -EIO; + +out: + if (err) + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; + return err; +} + + static int idefloppy_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct block_device *bdev = inode->i_bdev; struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); ide_drive_t *drive = floppy->drive; + idefloppy_pc_t pc; void __user *argp = (void __user *)arg; int err; - int prevent = (arg) ? 1 : 0; - idefloppy_pc_t pc; switch (cmd) { case CDROMEJECT: - prevent = 0; /* fall through */ case CDROM_LOCKDOOR: - if (floppy->openers > 1) - return -EBUSY; - - /* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { - idefloppy_create_prevent_cmd(&pc, prevent); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - if (cmd == CDROMEJECT) { - idefloppy_create_start_stop_cmd(&pc, 2); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - return 0; + return ide_floppy_lockdoor(floppy, &pc, arg, cmd); case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: return 0; case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: - return idefloppy_get_format_capacities(drive, argp); + return ide_floppy_get_format_capacities(drive, argp); case IDEFLOPPY_IOCTL_FORMAT_START: - if (!(file->f_mode & 2)) return -EPERM; - if (floppy->openers > 1) { - /* Don't format if someone is using the disk */ - - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, - &floppy->flags); - return -EBUSY; - } - - set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); - - err = idefloppy_begin_format(drive, argp); - if (err) - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); - return err; - /* - ** Note, the bit will be cleared when the device is - ** closed. This is the cleanest way to handle the - ** situation where the drive does not support - ** format progress reporting. - */ + return ide_floppy_format_unit(floppy, (int __user *)arg); case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS: return idefloppy_get_format_progress(drive, argp); } @@ -1967,13 +1644,16 @@ static int idefloppy_media_changed(struct gendisk *disk) { struct ide_floppy_obj *floppy = ide_floppy_g(disk); ide_drive_t *drive = floppy->drive; + int ret; /* do not scan partitions twice if this is a removable device */ if (drive->attach) { drive->attach = 0; return 0; } - return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags); + ret = !!(floppy->flags & IDEFLOPPY_FLAG_MEDIA_CHANGED); + floppy->flags &= ~IDEFLOPPY_FLAG_MEDIA_CHANGED; + return ret; } static int idefloppy_revalidate_disk(struct gendisk *disk) @@ -2004,16 +1684,20 @@ static int ide_floppy_probe(ide_drive_t *drive) goto failed; if (drive->media != ide_floppy) goto failed; - if (!idefloppy_identify_device (drive, drive->id)) { - printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name); + if (!idefloppy_identify_device(drive, drive->id)) { + printk(KERN_ERR "ide-floppy: %s: not supported by this version" + " of ide-floppy\n", drive->name); goto failed; } if (drive->scsi) { - printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name); + printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi" + " emulation.\n", drive->name); goto failed; } - if ((floppy = kzalloc(sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) { - printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name); + floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL); + if (!floppy) { + printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy" + " structure\n", drive->name); goto failed; } @@ -2035,7 +1719,7 @@ static int ide_floppy_probe(ide_drive_t *drive) drive->driver_data = floppy; - idefloppy_setup (drive, floppy); + idefloppy_setup(drive, floppy); g->minors = 1 << PARTN_BITS; g->driverfs_dev = &drive->gendev; @@ -2051,9 +1735,7 @@ failed: return -ENODEV; } -MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); - -static void __exit idefloppy_exit (void) +static void __exit idefloppy_exit(void) { driver_unregister(&idefloppy_driver.gen_driver); } @@ -2068,3 +1750,5 @@ MODULE_ALIAS("ide:*m-floppy*"); module_init(idefloppy_init); module_exit(idefloppy_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); + diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index bb30c29f6ec..be469dbbe8f 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -23,7 +23,7 @@ static int __init ide_generic_init(void) for (i = 0; i < MAX_HWIFS; i++) idx[i] = ide_hwifs[i].present ? 0xff : i; - ide_device_add_all(idx); + ide_device_add_all(idx, NULL); if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) ide_release_lock(); /* for atari only */ diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 16b1f6e1278..a95178f5e1b 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -163,8 +163,6 @@ void SELECT_DRIVE (ide_drive_t *drive) HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG); } -EXPORT_SYMBOL(SELECT_DRIVE); - void SELECT_MASK (ide_drive_t *drive, int mask) { if (HWIF(drive)->maskproc) @@ -614,66 +612,6 @@ no_80w: return 0; } -int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) -{ - if (args->tf.command == WIN_SETFEATURES && - args->tf.nsect > XFER_UDMA_2 && - args->tf.feature == SETFEATURES_XFER) { - if (eighty_ninty_three(drive) == 0) { - printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " - "be set\n", drive->name); - return 1; - } - } - - return 0; -} - -/* - * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER. - * 1 : Safe to update drive->id DMA registers. - * 0 : OOPs not allowed. - */ -int set_transfer (ide_drive_t *drive, ide_task_t *args) -{ - if (args->tf.command == WIN_SETFEATURES && - args->tf.nsect >= XFER_SW_DMA_0 && - args->tf.feature == SETFEATURES_XFER && - (drive->id->dma_ultra || - drive->id->dma_mword || - drive->id->dma_1word)) - return 1; - - return 0; -} - -#ifdef CONFIG_BLK_DEV_IDEDMA -static u8 ide_auto_reduce_xfer (ide_drive_t *drive) -{ - if (!drive->crc_count) - return drive->current_speed; - drive->crc_count = 0; - - switch(drive->current_speed) { - case XFER_UDMA_7: return XFER_UDMA_6; - case XFER_UDMA_6: return XFER_UDMA_5; - case XFER_UDMA_5: return XFER_UDMA_4; - case XFER_UDMA_4: return XFER_UDMA_3; - case XFER_UDMA_3: return XFER_UDMA_2; - case XFER_UDMA_2: return XFER_UDMA_1; - case XFER_UDMA_1: return XFER_UDMA_0; - /* - * OOPS we do not goto non Ultra DMA modes - * without iCRC's available we force - * the system to PIO and make the user - * invoke the ATA-1 ATA-2 DMA modes. - */ - case XFER_UDMA_0: - default: return XFER_PIO_4; - } -} -#endif /* CONFIG_BLK_DEV_IDEDMA */ - int ide_driveid_update(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; @@ -882,22 +820,17 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, unsigned long flags; ide_hwgroup_t *hwgroup = HWGROUP(drive); ide_hwif_t *hwif = HWIF(drive); - + spin_lock_irqsave(&ide_lock, flags); - BUG_ON(hwgroup->handler); - hwgroup->handler = handler; - hwgroup->expiry = expiry; - hwgroup->timer.expires = jiffies + timeout; - hwgroup->req_gen_timer = hwgroup->req_gen; - add_timer(&hwgroup->timer); + __ide_set_handler(drive, handler, timeout, expiry); hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG); - /* Drive takes 400nS to respond, we must avoid the IRQ being - serviced before that. - - FIXME: we could skip this delay with care on non shared - devices - */ + /* + * Drive takes 400nS to respond, we must avoid the IRQ being + * serviced before that. + * + * FIXME: we could skip this delay with care on non shared devices + */ ndelay(400); spin_unlock_irqrestore(&ide_lock, flags); } @@ -1005,19 +938,6 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) return ide_stopped; } -static void check_dma_crc(ide_drive_t *drive) -{ -#ifdef CONFIG_BLK_DEV_IDEDMA - if (drive->crc_count) { - ide_dma_off_quietly(drive); - ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive)); - if (drive->current_speed >= XFER_SW_DMA_0) - ide_dma_on(drive); - } else - ide_dma_off(drive); -#endif -} - static void ide_disk_pre_reset(ide_drive_t *drive) { int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1; @@ -1039,17 +959,20 @@ static void pre_reset(ide_drive_t *drive) else drive->post_reset = 1; + if (drive->using_dma) { + if (drive->crc_count) + ide_check_dma_crc(drive); + else + ide_dma_off(drive); + } + if (!drive->keep_settings) { - if (drive->using_dma) { - check_dma_crc(drive); - } else { + if (!drive->using_dma) { drive->unmask = 0; drive->io_32bit = 0; } return; } - if (drive->using_dma) - check_dma_crc(drive); if (HWIF(drive)->pre_reset != NULL) HWIF(drive)->pre_reset(drive); diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 4bda5cf2be3..b163b2e5221 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -49,7 +49,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); pnp_set_drvdata(dev,hwif); - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } @@ -60,9 +60,10 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id static void idepnp_remove(struct pnp_dev * dev) { ide_hwif_t *hwif = pnp_get_drvdata(dev); - if (hwif) { - ide_unregister(hwif->index); - } else + + if (hwif) + ide_unregister(hwif->index, 0, 0); + else printk(KERN_ERR "idepnp: Unable to remove device, please report.\n"); } diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 98a8af44bf6..9c07bdb68d1 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -423,8 +423,9 @@ static int ide_busy_sleep(ide_hwif_t *hwif) static int do_probe (ide_drive_t *drive, u8 cmd) { - int rc; ide_hwif_t *hwif = HWIF(drive); + int rc; + u8 stat; if (drive->present) { /* avoid waiting for inappropriate probes */ @@ -461,15 +462,17 @@ static int do_probe (ide_drive_t *drive, u8 cmd) /* failed: try again */ rc = try_to_identify(drive,cmd); } - if (hwif->INB(IDE_STATUS_REG) == (BUSY_STAT|READY_STAT)) + + stat = hwif->INB(IDE_STATUS_REG); + + if (stat == (BUSY_STAT | READY_STAT)) return 4; if ((rc == 1 && cmd == WIN_PIDENTIFY) && ((drive->autotune == IDE_TUNE_DEFAULT) || (drive->autotune == IDE_TUNE_AUTO))) { - printk("%s: no response (status = 0x%02x), " - "resetting drive\n", drive->name, - hwif->INB(IDE_STATUS_REG)); + printk(KERN_ERR "%s: no response (status = 0x%02x), " + "resetting drive\n", drive->name, stat); msleep(50); hwif->OUTB(drive->select.all, IDE_SELECT_REG); msleep(50); @@ -477,11 +480,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd) (void)ide_busy_sleep(hwif); rc = try_to_identify(drive, cmd); } + + /* ensure drive IRQ is clear */ + stat = hwif->INB(IDE_STATUS_REG); + if (rc == 1) - printk("%s: no response (status = 0x%02x)\n", - drive->name, hwif->INB(IDE_STATUS_REG)); - /* ensure drive irq is clear */ - (void) hwif->INB(IDE_STATUS_REG); + printk(KERN_ERR "%s: no response (status = 0x%02x)\n", + drive->name, stat); } else { /* not present or maybe ATAPI */ rc = 3; @@ -502,6 +507,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) static void enable_nest (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); + u8 stat; printk("%s: enabling %s -- ", hwif->name, drive->id->model); SELECT_DRIVE(drive); @@ -515,11 +521,12 @@ static void enable_nest (ide_drive_t *drive) msleep(50); - if (!OK_STAT((hwif->INB(IDE_STATUS_REG)), 0, BAD_STAT)) { - printk("failed (status = 0x%02x)\n", hwif->INB(IDE_STATUS_REG)); - } else { - printk("success\n"); - } + stat = hwif->INB(IDE_STATUS_REG); + + if (!OK_STAT(stat, 0, BAD_STAT)) + printk(KERN_CONT "failed (status = 0x%02x)\n", stat); + else + printk(KERN_CONT "success\n"); /* if !(success||timed-out) */ if (do_probe(drive, WIN_IDENTIFY) >= 2) { @@ -822,7 +829,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; - if (hwif->no_io_32bit) + if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) drive->no_io_32bit = 1; else drive->no_io_32bit = drive->id->dword_io ? 1 : 0; @@ -881,13 +888,6 @@ static int ide_init_queue(ide_drive_t *drive) q->queuedata = drive; blk_queue_segment_boundary(q, 0xffff); - if (!hwif->rqsize) { - if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) || - (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA)) - hwif->rqsize = 256; - else - hwif->rqsize = 65536; - } if (hwif->rqsize < max_sectors) max_sectors = hwif->rqsize; blk_queue_max_sectors(q, max_sectors); @@ -918,6 +918,48 @@ static int ide_init_queue(ide_drive_t *drive) return 0; } +static void ide_add_drive_to_hwgroup(ide_drive_t *drive) +{ + ide_hwgroup_t *hwgroup = drive->hwif->hwgroup; + + spin_lock_irq(&ide_lock); + if (!hwgroup->drive) { + /* first drive for hwgroup. */ + drive->next = drive; + hwgroup->drive = drive; + hwgroup->hwif = HWIF(hwgroup->drive); + } else { + drive->next = hwgroup->drive->next; + hwgroup->drive->next = drive; + } + spin_unlock_irq(&ide_lock); +} + +/* + * For any present drive: + * - allocate the block device queue + * - link drive into the hwgroup + */ +static void ide_port_setup_devices(ide_hwif_t *hwif) +{ + int i; + + for (i = 0; i < MAX_DRIVES; i++) { + ide_drive_t *drive = &hwif->drives[i]; + + if (!drive->present) + continue; + + if (ide_init_queue(drive)) { + printk(KERN_ERR "ide: failed to init %s\n", + drive->name); + continue; + } + + ide_add_drive_to_hwgroup(drive); + } +} + /* * This routine sets up the irq for an ide interface, and creates a new * hwgroup for the irq/hwif if none was previously assigned. @@ -1019,30 +1061,12 @@ static int init_irq (ide_hwif_t *hwif) goto out_unlink; } - /* - * For any present drive: - * - allocate the block device queue - * - link drive into the hwgroup - */ - for (index = 0; index < MAX_DRIVES; ++index) { - ide_drive_t *drive = &hwif->drives[index]; - if (!drive->present) - continue; - if (ide_init_queue(drive)) { - printk(KERN_ERR "ide: failed to init %s\n",drive->name); - continue; - } - spin_lock_irq(&ide_lock); - if (!hwgroup->drive) { - /* first drive for hwgroup. */ - drive->next = drive; - hwgroup->drive = drive; - hwgroup->hwif = HWIF(hwgroup->drive); - } else { - drive->next = hwgroup->drive->next; - hwgroup->drive->next = drive; - } - spin_unlock_irq(&ide_lock); + if (!hwif->rqsize) { + if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) || + (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA)) + hwif->rqsize = 256; + else + hwif->rqsize = 65536; } #if !defined(__mc68000__) && !defined(CONFIG_APUS) @@ -1058,6 +1082,9 @@ static int init_irq (ide_hwif_t *hwif) printk(" (%sed with %s)", hwif->sharing_irq ? "shar" : "serializ", match->name); printk("\n"); + + ide_port_setup_devices(hwif); + mutex_unlock(&ide_cfg_mtx); return 0; out_unlink: @@ -1182,30 +1209,6 @@ static void drive_release_dev (struct device *dev) complete(&drive->gendev_rel_comp); } -/* - * init_gendisk() (as opposed to ide_geninit) is called for each major device, - * after probing for drives, to allocate partition tables and other data - * structures needed for the routines in genhd.c. ide_geninit() gets called - * somewhat later, during the partition check. - */ -static void init_gendisk (ide_hwif_t *hwif) -{ - unsigned int unit; - - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t * drive = &hwif->drives[unit]; - ide_add_generic_settings(drive); - snprintf(drive->gendev.bus_id,BUS_ID_SIZE,"%u.%u", - hwif->index,unit); - drive->gendev.parent = &hwif->gendev; - drive->gendev.bus = &ide_bus_type; - drive->gendev.driver_data = drive; - drive->gendev.release = drive_release_dev; - } - blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, - THIS_MODULE, ata_probe, ata_lock, hwif); -} - static int hwif_init(ide_hwif_t *hwif) { int old_irq; @@ -1262,8 +1265,8 @@ static int hwif_init(ide_hwif_t *hwif) hwif->name, hwif->irq); done: - init_gendisk(hwif); - ide_acpi_init(hwif); + blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, + THIS_MODULE, ata_probe, ata_lock, hwif); return 1; out: @@ -1277,24 +1280,119 @@ static void hwif_register_devices(ide_hwif_t *hwif) for (i = 0; i < MAX_DRIVES; i++) { ide_drive_t *drive = &hwif->drives[i]; + struct device *dev = &drive->gendev; + int ret; - if (drive->present) { - int ret = device_register(&drive->gendev); + if (!drive->present) + continue; - if (ret < 0) - printk(KERN_WARNING "IDE: %s: " - "device_register error: %d\n", - __FUNCTION__, ret); - } + ide_add_generic_settings(drive); + + snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i); + dev->parent = &hwif->gendev; + dev->bus = &ide_bus_type; + dev->driver_data = drive; + dev->release = drive_release_dev; + + ret = device_register(dev); + if (ret < 0) + printk(KERN_WARNING "IDE: %s: device_register error: " + "%d\n", __func__, ret); + } +} + +static void ide_port_init_devices(ide_hwif_t *hwif) +{ + int i; + + for (i = 0; i < MAX_DRIVES; i++) { + ide_drive_t *drive = &hwif->drives[i]; + + if (hwif->host_flags & IDE_HFLAG_IO_32BIT) + drive->io_32bit = 1; + if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS) + drive->unmask = 1; + if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) + drive->no_unmask = 1; + if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) + drive->autotune = 1; + } + + if (hwif->port_init_devs) + hwif->port_init_devs(hwif); +} + +static void ide_init_port(ide_hwif_t *hwif, unsigned int port, + const struct ide_port_info *d) +{ + if (d->chipset != ide_etrax100) + hwif->channel = port; + + if (d->chipset) + hwif->chipset = d->chipset; + + if (d->init_iops) + d->init_iops(hwif); + + if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) + ide_hwif_setup_dma(hwif, d); + + if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || + (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) + hwif->irq = port ? 15 : 14; + + hwif->host_flags = d->host_flags; + hwif->pio_mask = d->pio_mask; + + if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) + hwif->mate->serialized = hwif->serialized = 1; + + hwif->swdma_mask = d->swdma_mask; + hwif->mwdma_mask = d->mwdma_mask; + hwif->ultra_mask = d->udma_mask; + + /* reset DMA masks only for SFF-style DMA controllers */ + if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0) + hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0; + + if (d->host_flags & IDE_HFLAG_RQSIZE_256) + hwif->rqsize = 256; + + /* call chipset specific routine for each enabled port */ + if (d->init_hwif) + d->init_hwif(hwif); + + if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) { + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = hwif->cable_detect(hwif); } } -int ide_device_add_all(u8 *idx) +int ide_device_add_all(u8 *idx, const struct ide_port_info *d) { - ide_hwif_t *hwif; + ide_hwif_t *hwif, *mate = NULL; int i, rc = 0; for (i = 0; i < MAX_HWIFS; i++) { + if (d == NULL || idx[i] == 0xff) { + mate = NULL; + continue; + } + + hwif = &ide_hwifs[idx[i]]; + + if (d->chipset != ide_etrax100 && (i & 1) && mate) { + hwif->mate = mate; + mate->mate = hwif; + } + + mate = (i & 1) ? NULL : hwif; + + ide_init_port(hwif, i & 1, d); + ide_port_init_devices(hwif); + } + + for (i = 0; i < MAX_HWIFS; i++) { if (idx[i] == 0xff) continue; @@ -1337,6 +1435,9 @@ int ide_device_add_all(u8 *idx) rc = -1; continue; } + + ide_acpi_init(hwif); + ide_acpi_port_init_devices(hwif); } for (i = 0; i < MAX_HWIFS; i++) { @@ -1354,15 +1455,22 @@ int ide_device_add_all(u8 *idx) } for (i = 0; i < MAX_HWIFS; i++) { - if (idx[i] != 0xff) - ide_proc_register_port(&ide_hwifs[idx[i]]); + if (idx[i] == 0xff) + continue; + + hwif = &ide_hwifs[idx[i]]; + + if (hwif->present) { + ide_proc_register_port(hwif); + ide_proc_port_register_devices(hwif); + } } return rc; } EXPORT_SYMBOL_GPL(ide_device_add_all); -int ide_device_add(u8 idx[4]) +int ide_device_add(u8 idx[4], const struct ide_port_info *d) { u8 idx_all[MAX_HWIFS]; int i; @@ -1370,6 +1478,6 @@ int ide_device_add(u8 idx[4]) for (i = 0; i < MAX_HWIFS; i++) idx_all[i] = (i < 4) ? idx[i] : 0xff; - return ide_device_add_all(idx_all); + return ide_device_add_all(idx_all, d); } EXPORT_SYMBOL_GPL(ide_device_add); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 00c249cba23..975c0ff0f43 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -739,7 +739,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) EXPORT_SYMBOL(ide_proc_unregister_driver); -static void create_proc_ide_drives(ide_hwif_t *hwif) +void ide_proc_port_register_devices(ide_hwif_t *hwif) { int d; struct proc_dir_entry *ent; @@ -793,9 +793,6 @@ static ide_proc_entry_t hwif_entries[] = { void ide_proc_register_port(ide_hwif_t *hwif) { - if (!hwif->present) - return; - if (!hwif->proc) { hwif->proc = proc_mkdir(hwif->name, proc_ide_root); @@ -804,8 +801,6 @@ void ide_proc_register_port(ide_hwif_t *hwif) ide_add_proc_entries(hwif->proc, hwif_entries, hwif); } - - create_proc_ide_drives(hwif); } #ifdef CONFIG_BLK_DEV_IDEPCI diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 5aef63acf1e..bf40d8c824a 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1,424 +1,18 @@ /* + * IDE ATAPI streaming tape driver. + * * Copyright (C) 1995-1999 Gadi Oxman <gadio@netvision.net.il> * Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz * - * $Header$ - * * This driver was constructed as a student project in the software laboratory * of the faculty of electrical engineering in the Technion - Israel's * Institute Of Technology, with the guide of Avner Lottem and Dr. Ilana David. * * It is hereby placed under the terms of the GNU general public license. * (See linux/COPYING). - */ - -/* - * IDE ATAPI streaming tape driver. - * - * This driver is a part of the Linux ide driver and works in co-operation - * with linux/drivers/block/ide.c. - * - * The driver, in co-operation with ide.c, basically traverses the - * request-list for the block device interface. The character device - * interface, on the other hand, creates new requests, adds them - * to the request-list of the block device, and waits for their completion. - * - * Pipelined operation mode is now supported on both reads and writes. - * - * The block device major and minor numbers are determined from the - * tape's relative position in the ide interfaces, as explained in ide.c. - * - * The character device interface consists of the following devices: - * - * ht0 major 37, minor 0 first IDE tape, rewind on close. - * ht1 major 37, minor 1 second IDE tape, rewind on close. - * ... - * nht0 major 37, minor 128 first IDE tape, no rewind on close. - * nht1 major 37, minor 129 second IDE tape, no rewind on close. - * ... - * - * Run linux/scripts/MAKEDEV.ide to create the above entries. - * - * The general magnetic tape commands compatible interface, as defined by - * include/linux/mtio.h, is accessible through the character device. - * - * General ide driver configuration options, such as the interrupt-unmask - * flag, can be configured by issuing an ioctl to the block device interface, - * as any other ide device. - * - * Our own ide-tape ioctl's can be issued to either the block device or - * the character device interface. - * - * Maximal throughput with minimal bus load will usually be achieved in the - * following scenario: - * - * 1. ide-tape is operating in the pipelined operation mode. - * 2. No buffering is performed by the user backup program. - * - * Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. - * - * Ver 0.1 Nov 1 95 Pre-working code :-) - * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure - * was successful ! (Using tar cvf ... on the block - * device interface). - * A longer backup resulted in major swapping, bad - * overall Linux performance and eventually failed as - * we received non serial read-ahead requests from the - * buffer cache. - * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the - * character device interface. Linux's responsiveness - * and performance doesn't seem to be much affected - * from the background backup procedure. - * Some general mtio.h magnetic tape operations are - * now supported by our character device. As a result, - * popular tape utilities are starting to work with - * ide tapes :-) - * The following configurations were tested: - * 1. An IDE ATAPI TAPE shares the same interface - * and irq with an IDE ATAPI CDROM. - * 2. An IDE ATAPI TAPE shares the same interface - * and irq with a normal IDE disk. - * Both configurations seemed to work just fine ! - * However, to be on the safe side, it is meanwhile - * recommended to give the IDE TAPE its own interface - * and irq. - * The one thing which needs to be done here is to - * add a "request postpone" feature to ide.c, - * so that we won't have to wait for the tape to finish - * performing a long media access (DSC) request (such - * as a rewind) before we can access the other device - * on the same interface. This effect doesn't disturb - * normal operation most of the time because read/write - * requests are relatively fast, and once we are - * performing one tape r/w request, a lot of requests - * from the other device can be queued and ide.c will - * service all of them after this single tape request. - * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree. - * On each read / write request, we now ask the drive - * if we can transfer a constant number of bytes - * (a parameter of the drive) only to its buffers, - * without causing actual media access. If we can't, - * we just wait until we can by polling the DSC bit. - * This ensures that while we are not transferring - * more bytes than the constant referred to above, the - * interrupt latency will not become too high and - * we won't cause an interrupt timeout, as happened - * occasionally in the previous version. - * While polling for DSC, the current request is - * postponed and ide.c is free to handle requests from - * the other device. This is handled transparently to - * ide.c. The hwgroup locking method which was used - * in the previous version was removed. - * Use of new general features which are provided by - * ide.c for use with atapi devices. - * (Programming done by Mark Lord) - * Few potential bug fixes (Again, suggested by Mark) - * Single character device data transfers are now - * not limited in size, as they were before. - * We are asking the tape about its recommended - * transfer unit and send a larger data transfer - * as several transfers of the above size. - * For best results, use an integral number of this - * basic unit (which is shown during driver - * initialization). I will soon add an ioctl to get - * this important parameter. - * Our data transfer buffer is allocated on startup, - * rather than before each data transfer. This should - * ensure that we will indeed have a data buffer. - * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape - * shared an interface with another device. - * (poll_for_dsc was a complete mess). - * Removed some old (non-active) code which had - * to do with supporting buffer cache originated - * requests. - * The block device interface can now be opened, so - * that general ide driver features like the unmask - * interrupts flag can be selected with an ioctl. - * This is the only use of the block device interface. - * New fast pipelined operation mode (currently only on - * writes). When using the pipelined mode, the - * throughput can potentially reach the maximum - * tape supported throughput, regardless of the - * user backup program. On my tape drive, it sometimes - * boosted performance by a factor of 2. Pipelined - * mode is enabled by default, but since it has a few - * downfalls as well, you may want to disable it. - * A short explanation of the pipelined operation mode - * is available below. - * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition. - * Added pipeline read mode. As a result, restores - * are now as fast as backups. - * Optimized shared interface behavior. The new behavior - * typically results in better IDE bus efficiency and - * higher tape throughput. - * Pre-calculation of the expected read/write request - * service time, based on the tape's parameters. In - * the pipelined operation mode, this allows us to - * adjust our polling frequency to a much lower value, - * and thus to dramatically reduce our load on Linux, - * without any decrease in performance. - * Implemented additional mtio.h operations. - * The recommended user block size is returned by - * the MTIOCGET ioctl. - * Additional minor changes. - * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the - * use of some block sizes during a restore procedure. - * The character device interface will now present a - * continuous view of the media - any mix of block sizes - * during a backup/restore procedure is supported. The - * driver will buffer the requests internally and - * convert them to the tape's recommended transfer - * unit, making performance almost independent of the - * chosen user block size. - * Some improvements in error recovery. - * By cooperating with ide-dma.c, bus mastering DMA can - * now sometimes be used with IDE tape drives as well. - * Bus mastering DMA has the potential to dramatically - * reduce the CPU's overhead when accessing the device, - * and can be enabled by using hdparm -d1 on the tape's - * block device interface. For more info, read the - * comments in ide-dma.c. - * Ver 1.4 Mar 13 96 Fixed serialize support. - * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85. - * Fixed pipelined read mode inefficiency. - * Fixed nasty null dereferencing bug. - * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver. - * Fixed end of media bug. - * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model. - * Ver 1.8 Sep 26 96 Attempt to find a better balance between good - * interactive response and high system throughput. - * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather - * than requiring an explicit FSF command. - * Abort pending requests at end of media. - * MTTELL was sometimes returning incorrect results. - * Return the real block size in the MTIOCGET ioctl. - * Some error recovery bug fixes. - * Ver 1.10 Nov 5 96 Major reorganization. - * Reduced CPU overhead a bit by eliminating internal - * bounce buffers. - * Added module support. - * Added multiple tape drives support. - * Added partition support. - * Rewrote DSC handling. - * Some portability fixes. - * Removed ide-tape.h. - * Additional minor changes. - * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling. - * Use ide_stall_queue() for DSC overlap. - * Use the maximum speed rather than the current speed - * to compute the request service time. - * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data - * corruption, which could occur if the total number - * of bytes written to the tape was not an integral - * number of tape blocks. - * Add support for INTERRUPT DRQ devices. - * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB - * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives. - * Replace cli()/sti() with hwgroup spinlocks. - * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup - * spinlock with private per-tape spinlock. - * Ver 1.16 Sep 1 99 Add OnStream tape support. - * Abort read pipeline on EOD. - * Wait for the tape to become ready in case it returns - * "in the process of becoming ready" on open(). - * Fix zero padding of the last written block in - * case the tape block size is larger than PAGE_SIZE. - * Decrease the default disconnection time to tn. - * Ver 1.16e Oct 3 99 Minor fixes. - * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen, - * niessen@iae.nl / arnold.niessen@philips.com - * GO-1) Undefined code in idetape_read_position - * according to Gadi's email - * AJN-1) Minor fix asc == 11 should be asc == 0x11 - * in idetape_issue_packet_command (did effect - * debugging output only) - * AJN-2) Added more debugging output, and - * added ide-tape: where missing. I would also - * like to add tape->name where possible - * AJN-3) Added different debug_level's - * via /proc/ide/hdc/settings - * "debug_level" determines amount of debugging output; - * can be changed using /proc/ide/hdx/settings - * 0 : almost no debugging output - * 1 : 0+output errors only - * 2 : 1+output all sensekey/asc - * 3 : 2+follow all chrdev related procedures - * 4 : 3+follow all procedures - * 5 : 4+include pc_stack rq_stack info - * 6 : 5+USE_COUNT updates - * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail - * from 5 to 10 minutes - * AJN-5) Changed maximum number of blocks to skip when - * reading tapes with multiple consecutive write - * errors from 100 to 1000 in idetape_get_logical_blk - * Proposed changes to code: - * 1) output "logical_blk_num" via /proc - * 2) output "current_operation" via /proc - * 3) Either solve or document the fact that `mt rewind' is - * required after reading from /dev/nhtx to be - * able to rmmod the idetape module; - * Also, sometimes an application finishes but the - * device remains `busy' for some time. Same cause ? - * Proposed changes to release-notes: - * 4) write a simple `quickstart' section in the - * release notes; I volunteer if you don't want to - * 5) include a pointer to video4linux in the doc - * to stimulate video applications - * 6) release notes lines 331 and 362: explain what happens - * if the application data rate is higher than 1100 KB/s; - * similar approach to lower-than-500 kB/s ? - * 7) 6.6 Comparison; wouldn't it be better to allow different - * strategies for read and write ? - * Wouldn't it be better to control the tape buffer - * contents instead of the bandwidth ? - * 8) line 536: replace will by would (if I understand - * this section correctly, a hypothetical and unwanted situation - * is being described) - * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames. - * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl - * - Add idetape_onstream_mode_sense_tape_parameter_page - * function to get tape capacity in frames: tape->capacity. - * - Add support for DI-50 drives( or any DI- drive). - * - 'workaround' for read error/blank block around block 3000. - * - Implement Early warning for end of media for Onstream. - * - Cosmetic code changes for readability. - * - Idetape_position_tape should not use SKIP bit during - * Onstream read recovery. - * - Add capacity, logical_blk_num and first/last_frame_position - * to /proc/ide/hd?/settings. - * - Module use count was gone in the Linux 2.4 driver. - * Ver 1.17a Apr 2001 Willem Riede osst@riede.org - * - Get drive's actual block size from mode sense block descriptor - * - Limit size of pipeline - * Ver 1.17b Oct 2002 Alan Stern <stern@rowland.harvard.edu> - * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used - * it in the code! - * Actually removed aborted stages in idetape_abort_pipeline - * instead of just changing the command code. - * Made the transfer byte count for Request Sense equal to the - * actual length of the data transfer. - * Changed handling of partial data transfers: they do not - * cause DMA errors. - * Moved initiation of DMA transfers to the correct place. - * Removed reference to unallocated memory. - * Made __idetape_discard_read_pipeline return the number of - * sectors skipped, not the number of stages. - * Replaced errant kfree() calls with __idetape_kfree_stage(). - * Fixed off-by-one error in testing the pipeline length. - * Fixed handling of filemarks in the read pipeline. - * Small code optimization for MTBSF and MTBSFM ioctls. - * Don't try to unlock the door during device close if is - * already unlocked! - * Cosmetic fixes to miscellaneous debugging output messages. - * Set the minimum /proc/ide/hd?/settings values for "pipeline", - * "pipeline_min", and "pipeline_max" to 1. - * - * Here are some words from the first releases of hd.c, which are quoted - * in ide.c and apply here as well: - * - * | Special care is recommended. Have Fun! * - */ - -/* - * An overview of the pipelined operation mode. - * - * In the pipelined write mode, we will usually just add requests to our - * pipeline and return immediately, before we even start to service them. The - * user program will then have enough time to prepare the next request while - * we are still busy servicing previous requests. In the pipelined read mode, - * the situation is similar - we add read-ahead requests into the pipeline, - * before the user even requested them. - * - * The pipeline can be viewed as a "safety net" which will be activated when - * the system load is high and prevents the user backup program from keeping up - * with the current tape speed. At this point, the pipeline will get - * shorter and shorter but the tape will still be streaming at the same speed. - * Assuming we have enough pipeline stages, the system load will hopefully - * decrease before the pipeline is completely empty, and the backup program - * will be able to "catch up" and refill the pipeline again. - * - * When using the pipelined mode, it would be best to disable any type of - * buffering done by the user program, as ide-tape already provides all the - * benefits in the kernel, where it can be done in a more efficient way. - * As we will usually not block the user program on a request, the most - * efficient user code will then be a simple read-write-read-... cycle. - * Any additional logic will usually just slow down the backup process. - * - * Using the pipelined mode, I get a constant over 400 KBps throughput, - * which seems to be the maximum throughput supported by my tape. - * - * However, there are some downfalls: - * - * 1. We use memory (for data buffers) in proportional to the number - * of pipeline stages (each stage is about 26 KB with my tape). - * 2. In the pipelined write mode, we cheat and postpone error codes - * to the user task. In read mode, the actual tape position - * will be a bit further than the last requested block. - * - * Concerning (1): - * - * 1. We allocate stages dynamically only when we need them. When - * we don't need them, we don't consume additional memory. In - * case we can't allocate stages, we just manage without them - * (at the expense of decreased throughput) so when Linux is - * tight in memory, we will not pose additional difficulties. - * - * 2. The maximum number of stages (which is, in fact, the maximum - * amount of memory) which we allocate is limited by the compile - * time parameter IDETAPE_MAX_PIPELINE_STAGES. - * - * 3. The maximum number of stages is a controlled parameter - We - * don't start from the user defined maximum number of stages - * but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we - * will not even allocate this amount of stages if the user - * program can't handle the speed). We then implement a feedback - * loop which checks if the pipeline is empty, and if it is, we - * increase the maximum number of stages as necessary until we - * reach the optimum value which just manages to keep the tape - * busy with minimum allocated memory or until we reach - * IDETAPE_MAX_PIPELINE_STAGES. - * - * Concerning (2): - * - * In pipelined write mode, ide-tape can not return accurate error codes - * to the user program since we usually just add the request to the - * pipeline without waiting for it to be serviced. In case an error - * occurs, I will report it on the next user request. - * - * In the pipelined read mode, subsequent read requests or forward - * filemark spacing will perform correctly, as we preserve all blocks - * and filemarks which we encountered during our excess read-ahead. - * - * For accurate tape positioning and error reporting, disabling - * pipelined mode might be the best option. - * - * You can enable/disable/tune the pipelined operation mode by adjusting - * the compile time parameters below. - */ - -/* - * Possible improvements. - * - * 1. Support for the ATAPI overlap protocol. - * - * In order to maximize bus throughput, we currently use the DSC - * overlap method which enables ide.c to service requests from the - * other device while the tape is busy executing a command. The - * DSC overlap method involves polling the tape's status register - * for the DSC bit, and servicing the other device while the tape - * isn't ready. - * - * In the current QIC development standard (December 1995), - * it is recommended that new tape drives will *in addition* - * implement the ATAPI overlap protocol, which is used for the - * same purpose - efficient use of the IDE bus, but is interrupt - * driven and thus has much less CPU overhead. - * - * ATAPI overlap is likely to be supported in most new ATAPI - * devices, including new ATAPI cdroms, and thus provides us - * a method by which we can achieve higher throughput when - * sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. + * For a historical changelog see + * Documentation/ide/ChangeLog.ide-tape.1995-2002 */ #define IDETAPE_VERSION "1.19" @@ -442,49 +36,13 @@ #include <linux/completion.h> #include <linux/bitops.h> #include <linux/mutex.h> +#include <scsi/scsi.h> #include <asm/byteorder.h> #include <asm/irq.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/unaligned.h> - -/* - * partition - */ -typedef struct os_partition_s { - __u8 partition_num; - __u8 par_desc_ver; - __u16 wrt_pass_cntr; - __u32 first_frame_addr; - __u32 last_frame_addr; - __u32 eod_frame_addr; -} os_partition_t; - -/* - * DAT entry - */ -typedef struct os_dat_entry_s { - __u32 blk_sz; - __u16 blk_cnt; - __u8 flags; - __u8 reserved; -} os_dat_entry_t; - -/* - * DAT - */ -#define OS_DAT_FLAGS_DATA (0xc) -#define OS_DAT_FLAGS_MARK (0x1) - -typedef struct os_dat_s { - __u8 dat_sz; - __u8 reserved1; - __u8 entry_cnt; - __u8 reserved3; - os_dat_entry_t dat_list[16]; -} os_dat_t; - #include <linux/mtio.h> /**************************** Tunable parameters *****************************/ @@ -512,10 +70,7 @@ typedef struct os_dat_s { /* * The following are used to debug the driver: * - * Setting IDETAPE_DEBUG_INFO to 1 will report device capabilities. * Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control. - * Setting IDETAPE_DEBUG_BUGS to 1 will enable self-sanity checks in - * some places. * * Setting them to 0 will restore normal operation mode: * @@ -527,9 +82,7 @@ typedef struct os_dat_s { * is verified to be stable enough. This will make it much more * esthetic. */ -#define IDETAPE_DEBUG_INFO 0 #define IDETAPE_DEBUG_LOG 0 -#define IDETAPE_DEBUG_BUGS 1 /* * After each failed packet command we issue a request sense command @@ -671,65 +224,6 @@ typedef struct idetape_packet_command_s { #define PC_WRITING 5 /* - * Capabilities and Mechanical Status Page - */ -typedef struct { - unsigned page_code :6; /* Page code - Should be 0x2a */ - __u8 reserved0_6 :1; - __u8 ps :1; /* parameters saveable */ - __u8 page_length; /* Page Length - Should be 0x12 */ - __u8 reserved2, reserved3; - unsigned ro :1; /* Read Only Mode */ - unsigned reserved4_1234 :4; - unsigned sprev :1; /* Supports SPACE in the reverse direction */ - unsigned reserved4_67 :2; - unsigned reserved5_012 :3; - unsigned efmt :1; /* Supports ERASE command initiated formatting */ - unsigned reserved5_4 :1; - unsigned qfa :1; /* Supports the QFA two partition formats */ - unsigned reserved5_67 :2; - unsigned lock :1; /* Supports locking the volume */ - unsigned locked :1; /* The volume is locked */ - unsigned prevent :1; /* The device defaults in the prevent state after power up */ - unsigned eject :1; /* The device can eject the volume */ - __u8 disconnect :1; /* The device can break request > ctl */ - __u8 reserved6_5 :1; - unsigned ecc :1; /* Supports error correction */ - unsigned cmprs :1; /* Supports data compression */ - unsigned reserved7_0 :1; - unsigned blk512 :1; /* Supports 512 bytes block size */ - unsigned blk1024 :1; /* Supports 1024 bytes block size */ - unsigned reserved7_3_6 :4; - unsigned blk32768 :1; /* slowb - the device restricts the byte count for PIO */ - /* transfers for slow buffer memory ??? */ - /* Also 32768 block size in some cases */ - __u16 max_speed; /* Maximum speed supported in KBps */ - __u8 reserved10, reserved11; - __u16 ctl; /* Continuous Transfer Limit in blocks */ - __u16 speed; /* Current Speed, in KBps */ - __u16 buffer_size; /* Buffer Size, in 512 bytes */ - __u8 reserved18, reserved19; -} idetape_capabilities_page_t; - -/* - * Block Size Page - */ -typedef struct { - unsigned page_code :6; /* Page code - Should be 0x30 */ - unsigned reserved1_6 :1; - unsigned ps :1; - __u8 page_length; /* Page Length - Should be 2 */ - __u8 reserved2; - unsigned play32 :1; - unsigned play32_5 :1; - unsigned reserved2_23 :2; - unsigned record32 :1; - unsigned record32_5 :1; - unsigned reserved2_6 :1; - unsigned one :1; -} idetape_block_size_page_t; - -/* * A pipeline stage. */ typedef struct idetape_stage_s { @@ -739,32 +233,6 @@ typedef struct idetape_stage_s { } idetape_stage_t; /* - * REQUEST SENSE packet command result - Data Format. - */ -typedef struct { - unsigned error_code :7; /* Current of deferred errors */ - unsigned valid :1; /* The information field conforms to QIC-157C */ - __u8 reserved1 :8; /* Segment Number - Reserved */ - unsigned sense_key :4; /* Sense Key */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned eom :1; /* End Of Medium */ - unsigned filemark :1; /* Filemark */ - __u32 information __attribute__ ((packed)); - __u8 asl; /* Additional sense length (n-7) */ - __u32 command_specific; /* Additional command specific information */ - __u8 asc; /* Additional Sense Code */ - __u8 ascq; /* Additional Sense Code Qualifier */ - __u8 replaceable_unit_code; /* Field Replaceable Unit Code */ - unsigned sk_specific1 :7; /* Sense Key Specific */ - unsigned sksv :1; /* Sense Key Specific information is valid */ - __u8 sk_specific2; /* Sense Key Specific */ - __u8 sk_specific3; /* Sense Key Specific */ - __u8 pad[2]; /* Padding to 20 bytes */ -} idetape_request_sense_result_t; - - -/* * Most of our global data which we need to save even as we leave the * driver due to an interrupt or a timer event is stored in a variable * of type idetape_tape_t, defined below. @@ -854,8 +322,9 @@ typedef struct ide_tape_obj { /* Usually 512 or 1024 bytes */ unsigned short tape_block_size; int user_bs_factor; + /* Copy of the tape's Capabilities and Mechanical Page */ - idetape_capabilities_page_t capabilities; + u8 caps[20]; /* * Active data transfer request parameters. @@ -918,9 +387,6 @@ typedef struct ide_tape_obj { int avg_size; int avg_speed; - /* last sense information */ - idetape_request_sense_result_t sense; - char vendor_id[10]; char product_id[18]; char firmware_revision[6]; @@ -1052,27 +518,6 @@ static void ide_tape_put(struct ide_tape_obj *tape) #define IDETAPE_MEDIUM_PRESENT 9 /* - * Supported ATAPI tape drives packet commands - */ -#define IDETAPE_TEST_UNIT_READY_CMD 0x00 -#define IDETAPE_REWIND_CMD 0x01 -#define IDETAPE_REQUEST_SENSE_CMD 0x03 -#define IDETAPE_READ_CMD 0x08 -#define IDETAPE_WRITE_CMD 0x0a -#define IDETAPE_WRITE_FILEMARK_CMD 0x10 -#define IDETAPE_SPACE_CMD 0x11 -#define IDETAPE_INQUIRY_CMD 0x12 -#define IDETAPE_ERASE_CMD 0x19 -#define IDETAPE_MODE_SENSE_CMD 0x1a -#define IDETAPE_MODE_SELECT_CMD 0x15 -#define IDETAPE_LOAD_UNLOAD_CMD 0x1b -#define IDETAPE_PREVENT_CMD 0x1e -#define IDETAPE_LOCATE_CMD 0x2b -#define IDETAPE_READ_POSITION_CMD 0x34 -#define IDETAPE_READ_BUFFER_CMD 0x3c -#define IDETAPE_SET_SPEED_CMD 0xbb - -/* * Some defines for the READ BUFFER command */ #define IDETAPE_RETRIEVE_FAULTY_BLOCK 6 @@ -1129,31 +574,6 @@ struct idetape_id_gcw { }; /* - * INQUIRY packet command - Data Format (From Table 6-8 of QIC-157C) - */ -typedef struct { - unsigned device_type :5; /* Peripheral Device Type */ - unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */ - unsigned reserved1_6t0 :7; /* Reserved */ - unsigned rmb :1; /* Removable Medium Bit */ - unsigned ansi_version :3; /* ANSI Version */ - unsigned ecma_version :3; /* ECMA Version */ - unsigned iso_version :2; /* ISO Version */ - unsigned response_format :4; /* Response Data Format */ - unsigned reserved3_45 :2; /* Reserved */ - unsigned reserved3_6 :1; /* TrmIOP - Reserved */ - unsigned reserved3_7 :1; /* AENC - Reserved */ - __u8 additional_length; /* Additional Length (total_length-4) */ - __u8 rsv5, rsv6, rsv7; /* Reserved */ - __u8 vendor_id[8]; /* Vendor Identification */ - __u8 product_id[16]; /* Product Identification */ - __u8 revision_level[4]; /* Revision Level */ - __u8 vendor_specific[20]; /* Vendor Specific - Optional */ - __u8 reserved56t95[40]; /* Reserved - Optional */ - /* Additional information may be returned */ -} idetape_inquiry_result_t; - -/* * READ POSITION packet command - Data Format (From Table 6-57) */ typedef struct { @@ -1171,100 +591,9 @@ typedef struct { u32 bytes_in_buffer; /* Bytes In Buffer (Optional) */ } idetape_read_position_result_t; -/* - * Follows structures which are related to the SELECT SENSE / MODE SENSE - * packet commands. Those packet commands are still not supported - * by ide-tape. - */ +/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ #define IDETAPE_BLOCK_DESCRIPTOR 0 #define IDETAPE_CAPABILITIES_PAGE 0x2a -#define IDETAPE_PARAMTR_PAGE 0x2b /* Onstream DI-x0 only */ -#define IDETAPE_BLOCK_SIZE_PAGE 0x30 -#define IDETAPE_BUFFER_FILLING_PAGE 0x33 - -/* - * Mode Parameter Header for the MODE SENSE packet command - */ -typedef struct { - __u8 mode_data_length; /* Length of the following data transfer */ - __u8 medium_type; /* Medium Type */ - __u8 dsp; /* Device Specific Parameter */ - __u8 bdl; /* Block Descriptor Length */ -#if 0 - /* data transfer page */ - __u8 page_code :6; - __u8 reserved0_6 :1; - __u8 ps :1; /* parameters saveable */ - __u8 page_length; /* page Length == 0x02 */ - __u8 reserved2; - __u8 read32k :1; /* 32k blk size (data only) */ - __u8 read32k5 :1; /* 32.5k blk size (data&AUX) */ - __u8 reserved3_23 :2; - __u8 write32k :1; /* 32k blk size (data only) */ - __u8 write32k5 :1; /* 32.5k blk size (data&AUX) */ - __u8 reserved3_6 :1; - __u8 streaming :1; /* streaming mode enable */ -#endif -} idetape_mode_parameter_header_t; - -/* - * Mode Parameter Block Descriptor the MODE SENSE packet command - * - * Support for block descriptors is optional. - */ -typedef struct { - __u8 density_code; /* Medium density code */ - __u8 blocks[3]; /* Number of blocks */ - __u8 reserved4; /* Reserved */ - __u8 length[3]; /* Block Length */ -} idetape_parameter_block_descriptor_t; - -/* - * The Data Compression Page, as returned by the MODE SENSE packet command. - */ -typedef struct { - unsigned page_code :6; /* Page Code - Should be 0xf */ - unsigned reserved0 :1; /* Reserved */ - unsigned ps :1; - __u8 page_length; /* Page Length - Should be 14 */ - unsigned reserved2 :6; /* Reserved */ - unsigned dcc :1; /* Data Compression Capable */ - unsigned dce :1; /* Data Compression Enable */ - unsigned reserved3 :5; /* Reserved */ - unsigned red :2; /* Report Exception on Decompression */ - unsigned dde :1; /* Data Decompression Enable */ - __u32 ca; /* Compression Algorithm */ - __u32 da; /* Decompression Algorithm */ - __u8 reserved[4]; /* Reserved */ -} idetape_data_compression_page_t; - -/* - * The Medium Partition Page, as returned by the MODE SENSE packet command. - */ -typedef struct { - unsigned page_code :6; /* Page Code - Should be 0x11 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; - __u8 page_length; /* Page Length - Should be 6 */ - __u8 map; /* Maximum Additional Partitions - Should be 0 */ - __u8 apd; /* Additional Partitions Defined - Should be 0 */ - unsigned reserved4_012 :3; /* Reserved */ - unsigned psum :2; /* Should be 0 */ - unsigned idp :1; /* Should be 0 */ - unsigned sdp :1; /* Should be 0 */ - unsigned fdp :1; /* Fixed Data Partitions */ - __u8 mfr; /* Medium Format Recognition */ - __u8 reserved[2]; /* Reserved */ -} idetape_medium_partition_page_t; - -/* - * Run time configurable parameters. - */ -typedef struct { - int dsc_rw_frequency; - int dsc_media_access_frequency; - int nr_stages; -} idetape_config_t; /* * The variables below are used for the character device interface. @@ -1309,14 +638,12 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne int count; while (bcount) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_input_buffers\n"); idetape_discard_data(drive, bcount); return; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count); bcount -= count; @@ -1336,13 +663,11 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign int count; while (bcount) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_output_buffers\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min((unsigned int)pc->b_count, (unsigned int)bcount); HWIF(drive)->atapi_output_bytes(drive, pc->b_data, count); bcount -= count; @@ -1367,13 +692,11 @@ static void idetape_update_buffers (idetape_pc_t *pc) if (test_bit(PC_WRITING, &pc->flags)) return; while (bcount) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_update_buffers\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min((unsigned int)bh->b_size, (unsigned int)bcount); atomic_set(&bh->b_count, count); if (atomic_read(&bh->b_count) == bh->b_size) @@ -1446,36 +769,34 @@ static void idetape_init_pc (idetape_pc_t *pc) } /* - * idetape_analyze_error is called on each failed packet command retry - * to analyze the request sense. We currently do not utilize this - * information. + * called on each failed packet command retry to analyze the request sense. We + * currently do not utilize this information. */ -static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_result_t *result) +static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = tape->failed_pc; - tape->sense = *result; - tape->sense_key = result->sense_key; - tape->asc = result->asc; - tape->ascq = result->ascq; + tape->sense_key = sense[2] & 0xF; + tape->asc = sense[12]; + tape->ascq = sense[13]; #if IDETAPE_DEBUG_LOG /* - * Without debugging, we only log an error if we decided to - * give up retrying. + * Without debugging, we only log an error if we decided to give up + * retrying. */ if (tape->debug_level >= 1) printk(KERN_INFO "ide-tape: pc = %x, sense key = %x, " "asc = %x, ascq = %x\n", - pc->c[0], result->sense_key, - result->asc, result->ascq); + pc->c[0], tape->sense_key, + tape->asc, tape->ascq); #endif /* IDETAPE_DEBUG_LOG */ - /* - * Correct pc->actually_transferred by asking the tape. - */ + /* Correct pc->actually_transferred by asking the tape. */ if (test_bit(PC_DMA_ERROR, &pc->flags)) { - pc->actually_transferred = pc->request_transfer - tape->tape_block_size * ntohl(get_unaligned(&result->information)); + pc->actually_transferred = pc->request_transfer - + tape->tape_block_size * + be32_to_cpu(get_unaligned((u32 *)&sense[3])); idetape_update_buffers(pc); } @@ -1484,29 +805,29 @@ static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_res * with sense key=5, asc=0x22, ascq=0, let it slide. Some drives * (i.e. Seagate STT3401A Travan) don't support 0-length read/writes. */ - if ((pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD) - && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) { /* length==0 */ - if (result->sense_key == 5) { + if ((pc->c[0] == READ_6 || pc->c[0] == WRITE_6) + /* length == 0 */ + && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) { + if (tape->sense_key == 5) { /* don't report an error, everything's ok */ pc->error = 0; /* don't retry read/write */ set_bit(PC_ABORT, &pc->flags); } } - if (pc->c[0] == IDETAPE_READ_CMD && result->filemark) { + if (pc->c[0] == READ_6 && (sense[2] & 0x80)) { pc->error = IDETAPE_ERROR_FILEMARK; set_bit(PC_ABORT, &pc->flags); } - if (pc->c[0] == IDETAPE_WRITE_CMD) { - if (result->eom || - (result->sense_key == 0xd && result->asc == 0x0 && - result->ascq == 0x2)) { + if (pc->c[0] == WRITE_6) { + if ((sense[2] & 0x40) || (tape->sense_key == 0xd + && tape->asc == 0x0 && tape->ascq == 0x2)) { pc->error = IDETAPE_ERROR_EOD; set_bit(PC_ABORT, &pc->flags); } } - if (pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD) { - if (result->sense_key == 8) { + if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) { + if (tape->sense_key == 8) { pc->error = IDETAPE_ERROR_EOD; set_bit(PC_ABORT, &pc->flags); } @@ -1516,10 +837,7 @@ static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_res } } -/* - * idetape_active_next_stage will declare the next stage as "active". - */ -static void idetape_active_next_stage (ide_drive_t *drive) +static void idetape_activate_next_stage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *stage = tape->next_stage; @@ -1529,12 +847,10 @@ static void idetape_active_next_stage (ide_drive_t *drive) if (tape->debug_level >= 4) printk(KERN_INFO "ide-tape: Reached idetape_active_next_stage\n"); #endif /* IDETAPE_DEBUG_LOG */ -#if IDETAPE_DEBUG_BUGS if (stage == NULL) { printk(KERN_ERR "ide-tape: bug: Trying to activate a non existing stage\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ rq->rq_disk = tape->disk; rq->buffer = NULL; @@ -1609,28 +925,24 @@ static void idetape_remove_stage_head (ide_drive_t *drive) if (tape->debug_level >= 4) printk(KERN_INFO "ide-tape: Reached idetape_remove_stage_head\n"); #endif /* IDETAPE_DEBUG_LOG */ -#if IDETAPE_DEBUG_BUGS if (tape->first_stage == NULL) { printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n"); - return; + return; } if (tape->active_stage == tape->first_stage) { printk(KERN_ERR "ide-tape: bug: Trying to free our active pipeline stage\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ stage = tape->first_stage; tape->first_stage = stage->next; idetape_kfree_stage(tape, stage); tape->nr_stages--; if (tape->first_stage == NULL) { tape->last_stage = NULL; -#if IDETAPE_DEBUG_BUGS if (tape->next_stage != NULL) printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n"); if (tape->nr_stages) printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n"); -#endif /* IDETAPE_DEBUG_BUGS */ } } @@ -1716,7 +1028,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) } } if (tape->next_stage != NULL) { - idetape_active_next_stage(drive); + idetape_activate_next_stage(drive); /* * Insert the next request into the request queue. @@ -1748,7 +1060,7 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive) printk(KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n"); #endif /* IDETAPE_DEBUG_LOG */ if (!tape->pc->error) { - idetape_analyze_error(drive, (idetape_request_sense_result_t *) tape->pc->buffer); + idetape_analyze_error(drive, tape->pc->buffer); idetape_end_request(drive, 1, 0); } else { printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n"); @@ -1760,7 +1072,7 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive) static void idetape_create_request_sense_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_REQUEST_SENSE_CMD; + pc->c[0] = REQUEST_SENSE; pc->c[4] = 20; pc->request_transfer = 20; pc->callback = &idetape_request_sense_callback; @@ -1913,15 +1225,14 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) local_irq_enable(); #if SIMULATE_ERRORS - if ((pc->c[0] == IDETAPE_WRITE_CMD || - pc->c[0] == IDETAPE_READ_CMD) && + if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) && (++error_sim_count % 100) == 0) { printk(KERN_INFO "ide-tape: %s: simulating error\n", tape->name); stat |= ERR_STAT; } #endif - if ((stat & ERR_STAT) && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) + if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) stat &= ~ERR_STAT; if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { /* Error detected */ @@ -1930,7 +1241,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) printk(KERN_INFO "ide-tape: %s: I/O error\n", tape->name); #endif /* IDETAPE_DEBUG_LOG */ - if (pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) { + if (pc->c[0] == REQUEST_SENSE) { printk(KERN_ERR "ide-tape: I/O error in request sense command\n"); return ide_do_reset(drive); } @@ -2118,15 +1429,13 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape int dma_ok = 0; u16 bcount; -#if IDETAPE_DEBUG_BUGS - if (tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD && - pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) { + if (tape->pc->c[0] == REQUEST_SENSE && + pc->c[0] == REQUEST_SENSE) { printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " "Two request sense in serial were issued\n"); } -#endif /* IDETAPE_DEBUG_BUGS */ - if (tape->failed_pc == NULL && pc->c[0] != IDETAPE_REQUEST_SENSE_CMD) + if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) tape->failed_pc = pc; /* Set the current packet command */ tape->pc = pc; @@ -2139,7 +1448,7 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape * filemark, or end of the media, for example). */ if (!test_bit(PC_ABORT, &pc->flags)) { - if (!(pc->c[0] == IDETAPE_TEST_UNIT_READY_CMD && + if (!(pc->c[0] == TEST_UNIT_READY && tape->sense_key == 2 && tape->asc == 4 && (tape->ascq == 1 || tape->ascq == 8))) { printk(KERN_ERR "ide-tape: %s: I/O error, " @@ -2181,8 +1490,8 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape if (dma_ok) /* Will begin DMA later */ set_bit(PC_DMA_IN_PROGRESS, &pc->flags); if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) { - ide_set_handler(drive, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL); - hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, + IDETAPE_WAIT_CMD, NULL); return ide_started; } else { hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); @@ -2212,7 +1521,7 @@ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive) static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_MODE_SENSE_CMD; + pc->c[0] = MODE_SENSE; if (page_code != IDETAPE_BLOCK_DESCRIPTOR) pc->c[1] = 8; /* DBD = 1 - Don't return block descriptors */ pc->c[2] = page_code; @@ -2293,7 +1602,7 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive) if (stat & SEEK_STAT) { if (stat & ERR_STAT) { /* Error detected */ - if (pc->c[0] != IDETAPE_TEST_UNIT_READY_CMD) + if (pc->c[0] != TEST_UNIT_READY) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ @@ -2350,8 +1659,8 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_READ_CMD; - put_unaligned(htonl(length), (unsigned int *) &pc->c[1]); + pc->c[0] = READ_6; + put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->callback = &idetape_rw_callback; pc->bh = bh; @@ -2368,7 +1677,7 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p struct idetape_bh *p = bh; idetape_init_pc(pc); - pc->c[0] = IDETAPE_READ_BUFFER_CMD; + pc->c[0] = READ_BUFFER; pc->c[1] = IDETAPE_RETRIEVE_FAULTY_BLOCK; pc->c[7] = size >> 8; pc->c[8] = size & 0xff; @@ -2386,8 +1695,8 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_WRITE_CMD; - put_unaligned(htonl(length), (unsigned int *) &pc->c[1]); + pc->c[0] = WRITE_6; + put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->callback = &idetape_rw_callback; set_bit(PC_WRITING, &pc->flags); @@ -2412,12 +1721,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, u8 stat; #if IDETAPE_DEBUG_LOG -#if 0 - if (tape->debug_level >= 5) - printk(KERN_INFO "ide-tape: %d, " - "dev: %s, cmd: %ld, errors: %d\n", - rq->rq_disk->disk_name, rq->cmd[0], rq->errors); -#endif if (tape->debug_level >= 2) printk(KERN_INFO "ide-tape: sector: %ld, " "nr_sectors: %ld, current_nr_sectors: %d\n", @@ -2438,10 +1741,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, * Retry a failed packet command */ if (tape->failed_pc != NULL && - tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) { + tape->pc->c[0] == REQUEST_SENSE) { return idetape_issue_packet_command(drive, tape->failed_pc); } -#if IDETAPE_DEBUG_BUGS if (postponed_rq != NULL) if (rq != postponed_rq) { printk(KERN_ERR "ide-tape: ide-tape.c bug - " @@ -2449,7 +1751,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, idetape_end_request(drive, 0, 0); return ide_stopped; } -#endif /* IDETAPE_DEBUG_BUGS */ tape->postponed_rq = NULL; @@ -2636,13 +1937,11 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t * int ret = 0; while (n) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_copy_stage_from_user\n"); return 1; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n); if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count)) ret = 1; @@ -2666,13 +1965,11 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i int ret = 0; while (n) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_copy_stage_to_user\n"); return 1; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min(tape->b_count, n); if (copy_to_user(buf, tape->b_data, count)) ret = 1; @@ -2752,12 +2049,10 @@ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq) DECLARE_COMPLETION_ONSTACK(wait); idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_BUGS if (rq == NULL || !blk_special_request(rq)) { printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ rq->end_io_data = &wait; rq->end_io = blk_end_sync_rq; spin_unlock_irq(&tape->spinlock); @@ -2817,7 +2112,7 @@ static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive) static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_WRITE_FILEMARK_CMD; + pc->c[0] = WRITE_FILEMARKS; pc->c[4] = write_filemark; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -2826,7 +2121,7 @@ static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_TEST_UNIT_READY_CMD; + pc->c[0] = TEST_UNIT_READY; pc->callback = &idetape_pc_callback; } @@ -2864,7 +2159,7 @@ static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc) static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_LOAD_UNLOAD_CMD; + pc->c[0] = START_STOP; pc->c[4] = cmd; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -2921,7 +2216,7 @@ static int idetape_flush_tape_buffers (ide_drive_t *drive) static void idetape_create_read_position_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_READ_POSITION_CMD; + pc->c[0] = READ_POSITION; pc->request_transfer = 20; pc->callback = &idetape_read_position_callback; } @@ -2947,9 +2242,9 @@ static int idetape_read_position (ide_drive_t *drive) static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_LOCATE_CMD; + pc->c[0] = POSITION_TO_ELEMENT; pc->c[1] = 2; - put_unaligned(htonl(block), (unsigned int *) &pc->c[3]); + put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]); pc->c[8] = partition; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -2959,11 +2254,12 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int { idetape_tape_t *tape = drive->driver_data; - if (!tape->capabilities.lock) + /* device supports locking according to capabilities page */ + if (!(tape->caps[6] & 0x01)) return 0; idetape_init_pc(pc); - pc->c[0] = IDETAPE_PREVENT_CMD; + pc->c[0] = ALLOW_MEDIUM_REMOVAL; pc->c[4] = prevent; pc->callback = &idetape_pc_callback; return 1; @@ -3072,12 +2368,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct if (tape->debug_level >= 2) printk(KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd); #endif /* IDETAPE_DEBUG_LOG */ -#if IDETAPE_DEBUG_BUGS if (idetape_pipeline_active(tape)) { printk(KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n"); return (0); } -#endif /* IDETAPE_DEBUG_BUGS */ idetape_init_rq(&rq, cmd); rq.rq_disk = tape->disk; @@ -3108,7 +2402,7 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive) return; if (!idetape_pipeline_active(tape)) { set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); - idetape_active_next_stage(drive); + idetape_activate_next_stage(drive); (void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end); } } @@ -3116,7 +2410,7 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive) static void idetape_create_inquiry_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_INQUIRY_CMD; + pc->c[0] = INQUIRY; pc->c[4] = pc->request_transfer = 254; pc->callback = &idetape_pc_callback; } @@ -3124,28 +2418,15 @@ static void idetape_create_inquiry_cmd (idetape_pc_t *pc) static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_REWIND_CMD; + pc->c[0] = REZERO_UNIT; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; } -#if 0 -static void idetape_create_mode_select_cmd (idetape_pc_t *pc, int length) -{ - idetape_init_pc(pc); - set_bit(PC_WRITING, &pc->flags); - pc->c[0] = IDETAPE_MODE_SELECT_CMD; - pc->c[1] = 0x10; - put_unaligned(htons(length), (unsigned short *) &pc->c[3]); - pc->request_transfer = 255; - pc->callback = &idetape_pc_callback; -} -#endif - static void idetape_create_erase_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_ERASE_CMD; + pc->c[0] = ERASE; pc->c[1] = 1; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -3154,8 +2435,8 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc) static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_SPACE_CMD; - put_unaligned(htonl(count), (unsigned int *) &pc->c[1]); + pc->c[0] = SPACE; + put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]); pc->c[1] = cmd; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -3275,8 +2556,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; int blocks, min; struct idetape_bh *bh; - -#if IDETAPE_DEBUG_BUGS + if (tape->chrdev_direction != idetape_direction_write) { printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n"); return; @@ -3285,7 +2565,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n"); tape->merge_stage_size = tape->stage_size; } -#endif /* IDETAPE_DEBUG_BUGS */ if (tape->merge_stage_size) { blocks = tape->merge_stage_size / tape->tape_block_size; if (tape->merge_stage_size % tape->tape_block_size) { @@ -3330,7 +2609,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) * can be totally different on the next backup). */ tape->max_stages = tape->min_pipeline; -#if IDETAPE_DEBUG_BUGS if (tape->first_stage != NULL || tape->next_stage != NULL || tape->last_stage != NULL || @@ -3341,7 +2619,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) tape->first_stage, tape->next_stage, tape->last_stage, tape->nr_stages); } -#endif /* IDETAPE_DEBUG_BUGS */ } static void idetape_restart_speed_control (ide_drive_t *drive) @@ -3364,7 +2641,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) idetape_stage_t *new_stage; struct request rq; int bytes_read; - int blocks = tape->capabilities.ctl; + u16 blocks = *(u16 *)&tape->caps[12]; /* Initialize read operation */ if (tape->chrdev_direction != idetape_direction_read) { @@ -3372,12 +2649,10 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) idetape_empty_write_pipeline(drive); idetape_flush_tape_buffers(drive); } -#if IDETAPE_DEBUG_BUGS if (tape->merge_stage || tape->merge_stage_size) { printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n"); tape->merge_stage_size = 0; } -#endif /* IDETAPE_DEBUG_BUGS */ if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) return -ENOMEM; tape->chrdev_direction = idetape_direction_read; @@ -3478,12 +2753,10 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) tape->pipeline_head++; calculate_speeds(drive); } -#if IDETAPE_DEBUG_BUGS if (bytes_read > blocks * tape->tape_block_size) { printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n"); bytes_read = blocks * tape->tape_block_size; } -#endif /* IDETAPE_DEBUG_BUGS */ return (bytes_read); } @@ -3567,16 +2840,21 @@ static int idetape_rewind_tape (ide_drive_t *drive) static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg) { idetape_tape_t *tape = drive->driver_data; - idetape_config_t config; void __user *argp = (void __user *)arg; + struct idetape_config { + int dsc_rw_frequency; + int dsc_media_access_frequency; + int nr_stages; + } config; + #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 4) printk(KERN_INFO "ide-tape: Reached idetape_blkdev_ioctl\n"); #endif /* IDETAPE_DEBUG_LOG */ switch (cmd) { case 0x0340: - if (copy_from_user(&config, argp, sizeof (idetape_config_t))) + if (copy_from_user(&config, argp, sizeof(config))) return -EFAULT; tape->best_dsc_rw_frequency = config.dsc_rw_frequency; tape->max_stages = config.nr_stages; @@ -3584,7 +2862,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l case 0x0350: config.dsc_rw_frequency = (int) tape->best_dsc_rw_frequency; config.nr_stages = tape->max_stages; - if (copy_to_user(argp, &config, sizeof (idetape_config_t))) + if (copy_to_user(argp, &config, sizeof(config))) return -EFAULT; break; default: @@ -3608,11 +2886,12 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c idetape_pc_t pc; unsigned long flags; int retval,count=0; + int sprev = !!(tape->caps[4] & 0x20); if (mt_count == 0) return 0; if (MTBSF == mt_op || MTBSFM == mt_op) { - if (!tape->capabilities.sprev) + if (!sprev) return -EIO; mt_count = - mt_count; } @@ -3666,7 +2945,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c return (idetape_queue_pc_tail(drive, &pc)); case MTFSFM: case MTBSFM: - if (!tape->capabilities.sprev) + if (!sprev) return (-EIO); retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count); if (retval) return (retval); @@ -3703,6 +2982,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, ide_drive_t *drive = tape->drive; ssize_t bytes_read,temp, actually_read = 0, rc; ssize_t ret = 0; + u16 ctl = *(u16 *)&tape->caps[12]; #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 3) @@ -3728,7 +3008,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, count -= actually_read; } while (count >= tape->stage_size) { - bytes_read = idetape_add_chrdev_read_request(drive, tape->capabilities.ctl); + bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read)) @@ -3738,7 +3018,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, actually_read += bytes_read; } if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, tape->capabilities.ctl); + bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); @@ -3767,6 +3047,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, ide_drive_t *drive = tape->drive; ssize_t actually_written = 0; ssize_t ret = 0; + u16 ctl = *(u16 *)&tape->caps[12]; /* The drive is write protected. */ if (tape->write_prot) @@ -3782,13 +3063,11 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (tape->chrdev_direction != idetape_direction_write) { if (tape->chrdev_direction == idetape_direction_read) idetape_discard_read_pipeline(drive, 1); -#if IDETAPE_DEBUG_BUGS if (tape->merge_stage || tape->merge_stage_size) { printk(KERN_ERR "ide-tape: merge_stage_size " "should be 0 now\n"); tape->merge_stage_size = 0; } -#endif /* IDETAPE_DEBUG_BUGS */ if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) return -ENOMEM; tape->chrdev_direction = idetape_direction_write; @@ -3816,12 +3095,10 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (tape->restart_speed_control_req) idetape_restart_speed_control(drive); if (tape->merge_stage_size) { -#if IDETAPE_DEBUG_BUGS if (tape->merge_stage_size >= tape->stage_size) { printk(KERN_ERR "ide-tape: bug: merge buffer too big\n"); tape->merge_stage_size = 0; } -#endif /* IDETAPE_DEBUG_BUGS */ actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count); if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written)) ret = -EFAULT; @@ -3832,7 +3109,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (tape->merge_stage_size == tape->stage_size) { ssize_t retval; tape->merge_stage_size = 0; - retval = idetape_add_chrdev_write_request(drive, tape->capabilities.ctl); + retval = idetape_add_chrdev_write_request(drive, ctl); if (retval <= 0) return (retval); } @@ -3843,7 +3120,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, ret = -EFAULT; buf += tape->stage_size; count -= tape->stage_size; - retval = idetape_add_chrdev_write_request(drive, tape->capabilities.ctl); + retval = idetape_add_chrdev_write_request(drive, ctl); actually_written += tape->stage_size; if (retval <= 0) return (retval); @@ -3871,69 +3148,20 @@ static int idetape_write_filemark (ide_drive_t *drive) } /* - * idetape_mtioctop is called from idetape_chrdev_ioctl when - * the general mtio MTIOCTOP ioctl is requested. - * - * We currently support the following mtio.h operations: + * Called from idetape_chrdev_ioctl when the general mtio MTIOCTOP ioctl is + * requested. * - * MTFSF - Space over mt_count filemarks in the positive direction. - * The tape is positioned after the last spaced filemark. + * Note: MTBSF and MTBSFM are not supported when the tape doesn't support + * spacing over filemarks in the reverse direction. In this case, MTFSFM is also + * usually not supported (it is supported in the rare case in which we crossed + * the filemark during our read-ahead pipelined operation mode). * - * MTFSFM - Same as MTFSF, but the tape is positioned before the - * last filemark. + * The following commands are currently not supported: * - * MTBSF - Steps background over mt_count filemarks, tape is - * positioned before the last filemark. - * - * MTBSFM - Like MTBSF, only tape is positioned after the last filemark. - * - * Note: - * - * MTBSF and MTBSFM are not supported when the tape doesn't - * support spacing over filemarks in the reverse direction. - * In this case, MTFSFM is also usually not supported (it is - * supported in the rare case in which we crossed the filemark - * during our read-ahead pipelined operation mode). - * - * MTWEOF - Writes mt_count filemarks. Tape is positioned after - * the last written filemark. - * - * MTREW - Rewinds tape. - * - * MTLOAD - Loads the tape. - * - * MTOFFL - Puts the tape drive "Offline": Rewinds the tape and - * MTUNLOAD prevents further access until the media is replaced. - * - * MTNOP - Flushes tape buffers. - * - * MTRETEN - Retension media. This typically consists of one end - * to end pass on the media. - * - * MTEOM - Moves to the end of recorded data. - * - * MTERASE - Erases tape. - * - * MTSETBLK - Sets the user block size to mt_count bytes. If - * mt_count is 0, we will attempt to autodetect - * the block size. - * - * MTSEEK - Positions the tape in a specific block number, where - * each block is assumed to contain which user_block_size - * bytes. - * - * MTSETPART - Switches to another tape partition. - * - * MTLOCK - Locks the tape door. - * - * MTUNLOCK - Unlocks the tape door. - * - * The following commands are currently not supported: - * - * MTFSS, MTBSS, MTWSM, MTSETDENSITY, - * MTSETDRVBUFFER, MT_ST_BOOLEANS, MT_ST_WRITE_THRESHOLD. + * MTFSS, MTBSS, MTWSM, MTSETDENSITY, MTSETDRVBUFFER, MT_ST_BOOLEANS, + * MT_ST_WRITE_THRESHOLD. */ -static int idetape_mtioctop (ide_drive_t *drive,short mt_op,int mt_count) +static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; @@ -4048,29 +3276,12 @@ static int idetape_mtioctop (ide_drive_t *drive,short mt_op,int mt_count) } /* - * Our character device ioctls. - * - * General mtio.h magnetic io commands are supported here, and not in - * the corresponding block interface. - * - * The following ioctls are supported: - * - * MTIOCTOP - Refer to idetape_mtioctop for detailed description. - * - * MTIOCGET - The mt_dsreg field in the returned mtget structure - * will be set to (user block size in bytes << - * MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK. - * - * The mt_blkno is set to the current user block number. - * The other mtget fields are not supported. - * - * MTIOCPOS - The current tape "block position" is returned. We - * assume that each block contains user_block_size - * bytes. - * - * Our own ide-tape ioctls are supported on both interfaces. + * Our character device ioctls. General mtio.h magnetic io commands are + * supported here, and not in the corresponding block interface. Our own + * ide-tape ioctls are supported on both interfaces. */ -static int idetape_chrdev_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { struct ide_tape_obj *tape = ide_tape_f(file); ide_drive_t *drive = tape->drive; @@ -4124,7 +3335,30 @@ static int idetape_chrdev_ioctl (struct inode *inode, struct file *file, unsigne } } -static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive); +/* + * Do a mode sense page 0 with block descriptor and if it succeeds set the tape + * block size with the reported value. + */ +static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) +{ + idetape_tape_t *tape = drive->driver_data; + idetape_pc_t pc; + + idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); + if (idetape_queue_pc_tail(drive, &pc)) { + printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); + if (tape->tape_block_size == 0) { + printk(KERN_WARNING "ide-tape: Cannot deal with zero " + "block size, assuming 32k\n"); + tape->tape_block_size = 32768; + } + return; + } + tape->tape_block_size = (pc.buffer[4 + 5] << 16) + + (pc.buffer[4 + 6] << 8) + + pc.buffer[4 + 7]; + tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; +} /* * Our character device open function. @@ -4178,7 +3412,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); /* Read block size and write protect status from drive. */ - idetape_get_blocksize_from_block_descriptor(drive); + ide_tape_get_bsize_from_bdesc(drive); /* Set write protect flag if device is opened as read-only. */ if ((filp->f_flags & O_ACCMODE) == O_RDONLY) @@ -4296,190 +3530,100 @@ static int idetape_identify_device (ide_drive_t *drive) *((unsigned short *) &gcw) = id->config; -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Dumping ATAPI Identify Device tape parameters\n"); - printk(KERN_INFO "ide-tape: Protocol Type: "); - switch (gcw.protocol) { - case 0: case 1: printk("ATA\n");break; - case 2: printk("ATAPI\n");break; - case 3: printk("Reserved (Unknown to ide-tape)\n");break; - } - printk(KERN_INFO "ide-tape: Device Type: %x - ",gcw.device_type); - switch (gcw.device_type) { - case 0: printk("Direct-access Device\n");break; - case 1: printk("Streaming Tape Device\n");break; - case 2: case 3: case 4: printk("Reserved\n");break; - case 5: printk("CD-ROM Device\n");break; - case 6: printk("Reserved\n"); - case 7: printk("Optical memory Device\n");break; - case 0x1f: printk("Unknown or no Device type\n");break; - default: printk("Reserved\n"); - } - printk(KERN_INFO "ide-tape: Removable: %s",gcw.removable ? "Yes\n":"No\n"); - printk(KERN_INFO "ide-tape: Command Packet DRQ Type: "); - switch (gcw.drq_type) { - case 0: printk("Microprocessor DRQ\n");break; - case 1: printk("Interrupt DRQ\n");break; - case 2: printk("Accelerated DRQ\n");break; - case 3: printk("Reserved\n");break; - } - printk(KERN_INFO "ide-tape: Command Packet Size: "); - switch (gcw.packet_size) { - case 0: printk("12 bytes\n");break; - case 1: printk("16 bytes\n");break; - default: printk("Reserved\n");break; - } -#endif /* IDETAPE_DEBUG_INFO */ - /* Check that we can support this device */ - if (gcw.protocol !=2 ) - printk(KERN_ERR "ide-tape: Protocol is not ATAPI\n"); + if (gcw.protocol != 2) + printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n", + gcw.protocol); else if (gcw.device_type != 1) - printk(KERN_ERR "ide-tape: Device type is not set to tape\n"); + printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set " + "to tape\n", gcw.device_type); else if (!gcw.removable) printk(KERN_ERR "ide-tape: The removable flag is not set\n"); else if (gcw.packet_size != 0) { - printk(KERN_ERR "ide-tape: Packet size is not 12 bytes long\n"); - if (gcw.packet_size == 1) - printk(KERN_ERR "ide-tape: Sorry, padding to 16 bytes is still not supported\n"); + printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 " + "bytes long\n", gcw.packet_size); } else return 1; return 0; } -/* - * Use INQUIRY to get the firmware revision - */ -static void idetape_get_inquiry_results (ide_drive_t *drive) +static void idetape_get_inquiry_results(ide_drive_t *drive) { char *r; idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; - idetape_inquiry_result_t *inquiry; - + idetape_create_inquiry_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", tape->name); + printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", + tape->name); return; } - inquiry = (idetape_inquiry_result_t *) pc.buffer; - memcpy(tape->vendor_id, inquiry->vendor_id, 8); - memcpy(tape->product_id, inquiry->product_id, 16); - memcpy(tape->firmware_revision, inquiry->revision_level, 4); + memcpy(tape->vendor_id, &pc.buffer[8], 8); + memcpy(tape->product_id, &pc.buffer[16], 16); + memcpy(tape->firmware_revision, &pc.buffer[32], 4); + ide_fixstring(tape->vendor_id, 10, 0); ide_fixstring(tape->product_id, 18, 0); ide_fixstring(tape->firmware_revision, 6, 0); r = tape->firmware_revision; if (*(r + 1) == '.') - tape->firmware_revision_num = (*r - '0') * 100 + (*(r + 2) - '0') * 10 + *(r + 3) - '0'; - printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", drive->name, tape->name, tape->vendor_id, tape->product_id, tape->firmware_revision); + tape->firmware_revision_num = (*r - '0') * 100 + + (*(r + 2) - '0') * 10 + *(r + 3) - '0'; + printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", + drive->name, tape->name, tape->vendor_id, + tape->product_id, tape->firmware_revision); } /* - * idetape_get_mode_sense_results asks the tape about its various - * parameters. In particular, we will adjust our data transfer buffer - * size to the recommended value as returned by the tape. + * Ask the tape about its various parameters. In particular, we will adjust our + * data transfer buffer size to the recommended value as returned by the tape. */ static void idetape_get_mode_sense_results (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; - idetape_mode_parameter_header_t *header; - idetape_capabilities_page_t *capabilities; - + u8 *caps; + u8 speed, max_speed; + idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE); if (idetape_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming some default values\n"); + printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming" + " some default values\n"); tape->tape_block_size = 512; - tape->capabilities.ctl = 52; - tape->capabilities.speed = 450; - tape->capabilities.buffer_size = 6 * 52; + put_unaligned(52, (u16 *)&tape->caps[12]); + put_unaligned(540, (u16 *)&tape->caps[14]); + put_unaligned(6*52, (u16 *)&tape->caps[16]); return; } - header = (idetape_mode_parameter_header_t *) pc.buffer; - capabilities = (idetape_capabilities_page_t *) (pc.buffer + sizeof(idetape_mode_parameter_header_t) + header->bdl); + caps = pc.buffer + 4 + pc.buffer[3]; - capabilities->max_speed = ntohs(capabilities->max_speed); - capabilities->ctl = ntohs(capabilities->ctl); - capabilities->speed = ntohs(capabilities->speed); - capabilities->buffer_size = ntohs(capabilities->buffer_size); + /* convert to host order and save for later use */ + speed = be16_to_cpu(*(u16 *)&caps[14]); + max_speed = be16_to_cpu(*(u16 *)&caps[8]); - if (!capabilities->speed) { - printk(KERN_INFO "ide-tape: %s: overriding capabilities->speed (assuming 650KB/sec)\n", drive->name); - capabilities->speed = 650; + put_unaligned(max_speed, (u16 *)&caps[8]); + put_unaligned(be16_to_cpu(*(u16 *)&caps[12]), (u16 *)&caps[12]); + put_unaligned(speed, (u16 *)&caps[14]); + put_unaligned(be16_to_cpu(*(u16 *)&caps[16]), (u16 *)&caps[16]); + + if (!speed) { + printk(KERN_INFO "ide-tape: %s: invalid tape speed " + "(assuming 650KB/sec)\n", drive->name); + put_unaligned(650, (u16 *)&caps[14]); } - if (!capabilities->max_speed) { - printk(KERN_INFO "ide-tape: %s: overriding capabilities->max_speed (assuming 650KB/sec)\n", drive->name); - capabilities->max_speed = 650; + if (!max_speed) { + printk(KERN_INFO "ide-tape: %s: invalid max_speed " + "(assuming 650KB/sec)\n", drive->name); + put_unaligned(650, (u16 *)&caps[8]); } - tape->capabilities = *capabilities; /* Save us a copy */ - if (capabilities->blk512) + memcpy(&tape->caps, caps, 20); + if (caps[7] & 0x02) tape->tape_block_size = 512; - else if (capabilities->blk1024) + else if (caps[7] & 0x04) tape->tape_block_size = 1024; - -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Dumping the results of the MODE SENSE packet command\n"); - printk(KERN_INFO "ide-tape: Mode Parameter Header:\n"); - printk(KERN_INFO "ide-tape: Mode Data Length - %d\n",header->mode_data_length); - printk(KERN_INFO "ide-tape: Medium Type - %d\n",header->medium_type); - printk(KERN_INFO "ide-tape: Device Specific Parameter - %d\n",header->dsp); - printk(KERN_INFO "ide-tape: Block Descriptor Length - %d\n",header->bdl); - - printk(KERN_INFO "ide-tape: Capabilities and Mechanical Status Page:\n"); - printk(KERN_INFO "ide-tape: Page code - %d\n",capabilities->page_code); - printk(KERN_INFO "ide-tape: Page length - %d\n",capabilities->page_length); - printk(KERN_INFO "ide-tape: Read only - %s\n",capabilities->ro ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports reverse space - %s\n",capabilities->sprev ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports erase initiated formatting - %s\n",capabilities->efmt ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports QFA two Partition format - %s\n",capabilities->qfa ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports locking the medium - %s\n",capabilities->lock ? "Yes":"No"); - printk(KERN_INFO "ide-tape: The volume is currently locked - %s\n",capabilities->locked ? "Yes":"No"); - printk(KERN_INFO "ide-tape: The device defaults in the prevent state - %s\n",capabilities->prevent ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports ejecting the medium - %s\n",capabilities->eject ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports error correction - %s\n",capabilities->ecc ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports data compression - %s\n",capabilities->cmprs ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 512 bytes block size - %s\n",capabilities->blk512 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 1024 bytes block size - %s\n",capabilities->blk1024 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 32768 bytes block size / Restricted byte count for PIO transfers - %s\n",capabilities->blk32768 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Maximum supported speed in KBps - %d\n",capabilities->max_speed); - printk(KERN_INFO "ide-tape: Continuous transfer limits in blocks - %d\n",capabilities->ctl); - printk(KERN_INFO "ide-tape: Current speed in KBps - %d\n",capabilities->speed); - printk(KERN_INFO "ide-tape: Buffer size - %d\n",capabilities->buffer_size*512); -#endif /* IDETAPE_DEBUG_INFO */ -} - -/* - * ide_get_blocksize_from_block_descriptor does a mode sense page 0 with block descriptor - * and if it succeeds sets the tape block size with the reported value - */ -static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive) -{ - - idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; - idetape_mode_parameter_header_t *header; - idetape_parameter_block_descriptor_t *block_descrp; - - idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); - if (idetape_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); - if (tape->tape_block_size == 0) { - printk(KERN_WARNING "ide-tape: Cannot deal with zero block size, assume 32k\n"); - tape->tape_block_size = 32768; - } - return; - } - header = (idetape_mode_parameter_header_t *) pc.buffer; - block_descrp = (idetape_parameter_block_descriptor_t *) (pc.buffer + sizeof(idetape_mode_parameter_header_t)); - tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2]; - tape->drv_write_prot = (header->dsp & 0x80) >> 7; - -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size); -#endif /* IDETAPE_DEBUG_INFO */ } #ifdef CONFIG_IDE_PROC_FS @@ -4490,13 +3634,15 @@ static void idetape_add_settings (ide_drive_t *drive) /* * drive setting name read/write data type min max mul_factor div_factor data pointer set function */ - ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, &tape->capabilities.buffer_size, NULL); + ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, + 1, 2, (u16 *)&tape->caps[16], NULL); ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL); ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL); ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL); - ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, &tape->capabilities.speed, NULL); + ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, + 1, 1, (u16 *)&tape->caps[14], NULL); ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL); ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_frequency, NULL); ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); @@ -4528,6 +3674,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) struct idetape_id_gcw gcw; int stage_size; struct sysinfo si; + u16 *ctl = (u16 *)&tape->caps[12]; spin_lock_init(&tape->spinlock); drive->dsc_overlap = 1; @@ -4555,13 +3702,13 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) idetape_get_inquiry_results(drive); idetape_get_mode_sense_results(drive); - idetape_get_blocksize_from_block_descriptor(drive); + ide_tape_get_bsize_from_bdesc(drive); tape->user_bs_factor = 1; - tape->stage_size = tape->capabilities.ctl * tape->tape_block_size; + tape->stage_size = *ctl * tape->tape_block_size; while (tape->stage_size > 0xffff) { printk(KERN_NOTICE "ide-tape: decreasing stage size\n"); - tape->capabilities.ctl /= 2; - tape->stage_size = tape->capabilities.ctl * tape->tape_block_size; + *ctl /= 2; + tape->stage_size = *ctl * tape->tape_block_size; } stage_size = tape->stage_size; tape->pages_per_stage = stage_size / PAGE_SIZE; @@ -4570,11 +3717,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->excess_bh_size = PAGE_SIZE - stage_size % PAGE_SIZE; } - /* - * Select the "best" DSC read/write polling frequency - * and pipeline size. - */ - speed = max(tape->capabilities.speed, tape->capabilities.max_speed); + /* Select the "best" DSC read/write polling freq and pipeline size. */ + speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); tape->max_stages = speed * 1000 * 10 / tape->stage_size; @@ -4591,7 +3735,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1; t1 = (tape->stage_size * HZ) / (speed * 1000); - tmid = (tape->capabilities.buffer_size * 32 * HZ) / (speed * 125); + tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125); tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000); if (tape->max_stages) @@ -4606,8 +3750,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->best_dsc_rw_frequency = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN); printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " "%dkB pipeline, %lums tDSC%s\n", - drive->name, tape->name, tape->capabilities.speed, - (tape->capabilities.buffer_size * 512) / tape->stage_size, + drive->name, tape->name, *(u16 *)&tape->caps[14], + (*(u16 *)&tape->caps[16] * 512) / tape->stage_size, tape->stage_size / 1024, tape->max_stages * tape->stage_size / 1024, tape->best_dsc_rw_frequency * 1000 / HZ, diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 16a9a581d08..4e1da1c78cb 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -755,6 +755,7 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) u8 args[4], xfer_rate = 0; ide_task_t tfargs; struct ide_taskfile *tf = &tfargs.tf; + struct hd_driveid *id = drive->id; if (NULL == (void *) arg) { struct request rq; @@ -792,10 +793,16 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) return -ENOMEM; } - if (set_transfer(drive, &tfargs)) { + if (tf->command == WIN_SETFEATURES && + tf->feature == SETFEATURES_XFER && + tf->nsect >= XFER_SW_DMA_0 && + (id->dma_ultra || id->dma_mword || id->dma_1word)) { xfer_rate = args[1]; - if (ide_ata66_check(drive, &tfargs)) + if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) { + printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " + "be set\n", drive->name); goto abort; + } } err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index ab9ca2b5b66..ac613600161 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -499,6 +499,8 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) /** * ide_unregister - free an IDE interface * @index: index of interface (will change soon to a pointer) + * @init_default: init default hwif flag + * @restore: restore hwif flag * * Perform the final unregister of an IDE interface. At the moment * we don't refcount interfaces so this will also get split up. @@ -518,7 +520,7 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) * This is raving bonkers. */ -void ide_unregister(unsigned int index) +void ide_unregister(unsigned int index, int init_default, int restore) { ide_drive_t *drive; ide_hwif_t *hwif, *g; @@ -602,9 +604,12 @@ void ide_unregister(unsigned int index) /* restore hwif data to pristine status */ ide_init_port_data(hwif, index); - init_hwif_default(hwif, index); - ide_hwif_restore(hwif, &tmp_hwif); + if (init_default) + init_hwif_default(hwif, index); + + if (restore) + ide_hwif_restore(hwif, &tmp_hwif); abort: spin_unlock_irq(&ide_lock); @@ -678,6 +683,31 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) } EXPORT_SYMBOL_GPL(ide_init_port_hw); +ide_hwif_t *ide_deprecated_find_port(unsigned long base) +{ + ide_hwif_t *hwif; + int i; + + for (i = 0; i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->io_ports[IDE_DATA_OFFSET] == base) + goto found; + } + + for (i = 0; i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->hold) + continue; + if (!hwif->present && hwif->mate == NULL) + goto found; + } + + hwif = NULL; +found: + return hwif; +} +EXPORT_SYMBOL_GPL(ide_deprecated_find_port); + /** * ide_register_hw - register IDE interface * @hw: hardware registers @@ -697,38 +727,26 @@ int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; do { - for (index = 0; index < MAX_HWIFS; ++index) { - hwif = &ide_hwifs[index]; - if (hwif->io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET]) - goto found; - } - for (index = 0; index < MAX_HWIFS; ++index) { - hwif = &ide_hwifs[index]; - if (hwif->hold) - continue; - if (!hwif->present && hwif->mate == NULL) - goto found; - } + hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]); + index = hwif->index; + if (hwif) + goto found; for (index = 0; index < MAX_HWIFS; index++) - ide_unregister(index); + ide_unregister(index, 1, 1); } while (retry--); return -1; found: if (hwif->present) - ide_unregister(index); - else if (!hwif->hold) { + ide_unregister(index, 0, 1); + else if (!hwif->hold) ide_init_port_data(hwif, index); - init_hwif_default(hwif, index); - } - if (hwif->present) - return -1; ide_init_port_hw(hwif, hw); hwif->quirkproc = quirkproc; idx[0] = index; - ide_device_add(idx); + ide_device_add(idx, NULL); if (hwifp) *hwifp = hwif; @@ -791,10 +809,6 @@ int set_io_32bit(ide_drive_t *drive, int arg) return -EBUSY; drive->io_32bit = arg; -#ifdef CONFIG_BLK_DEV_DTC2278 - if (HWIF(drive)->chipset == ide_dtc2278) - HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg; -#endif /* CONFIG_BLK_DEV_DTC2278 */ spin_unlock_irq(&ide_lock); @@ -1021,11 +1035,8 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device case HDIO_GET_NICE: return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP | drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP | - drive->nice0 << IDE_NICE_0 | - drive->nice1 << IDE_NICE_1 | - drive->nice2 << IDE_NICE_2, + drive->nice1 << IDE_NICE_1, (long __user *) arg); - #ifdef CONFIG_IDE_TASK_IOCTL case HDIO_DRIVE_TASKFILE: if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) @@ -1066,7 +1077,7 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device case HDIO_UNREGISTER_HWIF: if (!capable(CAP_SYS_RAWIO)) return -EACCES; /* (arg > MAX_HWIFS) checked in function */ - ide_unregister(arg); + ide_unregister(arg, 1, 1); return 0; case HDIO_SET_NICE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -1711,7 +1722,7 @@ void __exit cleanup_module (void) int index; for (index = 0; index < MAX_HWIFS; ++index) - ide_unregister(index); + ide_unregister(index, 0, 0); proc_ide_destroy(); diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index e3ea2096804..d4d1a6bea59 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -191,9 +191,14 @@ static int __init initRegisters (void) { return t; } +static const struct ide_port_info ali14xx_port_info = { + .chipset = ide_ali14xx, + .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, + .pio_mask = ATA_PIO4, +}; + static int __init ali14xx_probe(void) { - ide_hwif_t *hwif, *mate; static u8 idx[4] = { 0, 1, 0xff, 0xff }; printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n", @@ -205,21 +210,10 @@ static int __init ali14xx_probe(void) return 1; } - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - - hwif->chipset = ide_ali14xx; - hwif->pio_mask = ATA_PIO4; - hwif->set_pio_mode = &ali14xx_set_pio_mode; - hwif->mate = mate; - - mate->chipset = ide_ali14xx; - mate->pio_mask = ATA_PIO4; - mate->set_pio_mode = &ali14xx_set_pio_mode; - mate->mate = hwif; - mate->channel = 1; + ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode; + ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode; - ide_device_add(idx); + ide_device_add(idx, &ali14xx_port_info); return 0; } diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index dd3d198ade4..8bdb79da17e 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -232,7 +232,7 @@ fail_base2: } } - ide_device_add(idx); + ide_device_add(idx, NULL); } return 0; diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 611c9705a3a..73396f70f2b 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -84,14 +84,20 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) /* Actually we do - there is a data sheet available for the Winbond but does anyone actually care */ } - - /* - * 32bit I/O has to be enabled for *both* drives at the same time. - */ - drive->io_32bit = 1; - HWIF(drive)->drives[!drive->select.b.unit].io_32bit = 1; } +static const struct ide_port_info dtc2278_port_info __initdata = { + .chipset = ide_dtc2278, + .host_flags = IDE_HFLAG_SERIALIZE | + IDE_HFLAG_NO_UNMASK_IRQS | + IDE_HFLAG_IO_32BIT | + /* disallow ->io_32bit changes */ + IDE_HFLAG_NO_IO_32BIT | + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE, + .pio_mask = ATA_PIO4, +}; + static int __init dtc2278_probe(void) { unsigned long flags; @@ -122,23 +128,9 @@ static int __init dtc2278_probe(void) #endif local_irq_restore(flags); - hwif->serialized = 1; - hwif->chipset = ide_dtc2278; - hwif->pio_mask = ATA_PIO4; hwif->set_pio_mode = &dtc2278_set_pio_mode; - hwif->drives[0].no_unmask = 1; - hwif->drives[1].no_unmask = 1; - hwif->mate = mate; - - mate->serialized = 1; - mate->chipset = ide_dtc2278; - mate->pio_mask = ATA_PIO4; - mate->drives[0].no_unmask = 1; - mate->drives[1].no_unmask = 1; - mate->mate = hwif; - mate->channel = 1; - - ide_device_add(idx); + + ide_device_add(idx, &dtc2278_port_info); return 0; } diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index c9bd6bfb1f3..85b69a82825 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -83,7 +83,7 @@ static int __init falconide_init(void) ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - ide_device_add(idx); + ide_device_add(idx, NULL); } } diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index f67c51a2c84..fc29ce75aff 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -186,7 +186,7 @@ found: release_mem_region(res_start, res_n); } - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 57bc15cddca..02d12c74764 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -300,16 +300,36 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) #endif } +static void __init ht6560b_port_init_devs(ide_hwif_t *hwif) +{ + /* Setting default configurations for drives. */ + int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT; + + if (hwif->channel) + t |= (HT_SECONDARY_IF << 8); + + hwif->drives[0].drive_data = t; + hwif->drives[1].drive_data = t; +} + int probe_ht6560b = 0; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); +static const struct ide_port_info ht6560b_port_info __initdata = { + .chipset = ide_ht6560b, + .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */ + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE | + IDE_HFLAG_ABUSE_PREFETCH, + .pio_mask = ATA_PIO5, +}; + static int __init ht6560b_init(void) { ide_hwif_t *hwif, *mate; static u8 idx[4] = { 0, 1, 0xff, 0xff }; - int t; if (probe_ht6560b == 0) return -ENODEV; @@ -328,36 +348,16 @@ static int __init ht6560b_init(void) goto release_region; } - hwif->chipset = ide_ht6560b; hwif->selectproc = &ht6560b_selectproc; - hwif->host_flags = IDE_HFLAG_ABUSE_PREFETCH; - hwif->pio_mask = ATA_PIO5; hwif->set_pio_mode = &ht6560b_set_pio_mode; - hwif->serialized = 1; /* is this needed? */ - hwif->mate = mate; - mate->chipset = ide_ht6560b; mate->selectproc = &ht6560b_selectproc; - mate->host_flags = IDE_HFLAG_ABUSE_PREFETCH; - mate->pio_mask = ATA_PIO5; mate->set_pio_mode = &ht6560b_set_pio_mode; - mate->serialized = 1; /* is this needed? */ - mate->mate = hwif; - mate->channel = 1; - - /* - * Setting default configurations for drives - */ - t = (HT_CONFIG_DEFAULT << 8); - t |= HT_TIMING_DEFAULT; - hwif->drives[0].drive_data = t; - hwif->drives[1].drive_data = t; - t |= (HT_SECONDARY_IF << 8); - mate->drives[0].drive_data = t; - mate->drives[1].drive_data = t; + hwif->port_init_devs = ht6560b_port_init_devs; + mate->port_init_devs = ht6560b_port_init_devs; - ide_device_add(idx); + ide_device_add(idx, &ht6560b_port_info); return 0; diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 3bd29676ef6..15ccf6944ae 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -145,13 +145,36 @@ static void ide_detach(struct pcmcia_device *link) static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) { + ide_hwif_t *hwif; hw_regs_t hw; + int i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + memset(&hw, 0, sizeof(hw)); - ide_init_hwif_ports(&hw, io, ctl, NULL); + ide_std_init_ports(&hw, io, ctl); hw.irq = irq; hw.chipset = ide_pci; hw.dev = &handle->dev; - return ide_register_hw(&hw, &ide_undecoded_slave, NULL); + + hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif == NULL) + return -1; + + i = hwif->index; + + if (hwif->present) + ide_unregister(i, 0, 0); + else if (!hwif->hold) + ide_init_port_data(hwif, i); + + ide_init_port_hw(hwif, &hw); + hwif->quirkproc = &ide_undecoded_slave; + + idx[0] = i; + + ide_device_add(idx, NULL); + + return hwif->present ? i : -1; } /*====================================================================== @@ -337,7 +360,7 @@ void ide_release(struct pcmcia_device *link) if (info->ndev) { /* FIXME: if this fails we need to queue the cleanup somehow -- need to investigate the required PCMCIA magic */ - ide_unregister(info->hd); + ide_unregister(info->hd, 0, 0); } info->ndev = 0; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 7c3231a21d1..26c82ce602d 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -108,7 +108,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); platform_set_drvdata(pdev, hwif); @@ -122,7 +122,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev) { ide_hwif_t *hwif = pdev->dev.driver_data; - ide_unregister(hwif->index); + ide_unregister(hwif->index, 0, 0); return 0; } diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index c54d07ff64f..06df8df857a 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -123,19 +123,9 @@ static int __init macide_init(void) ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - if (macintosh_config->ide_type == MAC_IDE_BABOON && - macintosh_config->ident == MAC_MODEL_PB190) { - /* Fix breakage in ide-disk.c: drive capacity */ - /* is not initialized for drives without a */ - /* hardware ID, and we can't get that without */ - /* probing the drive which freezes a 190. */ - ide_drive_t *drive = &hwif->drives[0]; - drive->capacity64 = drive->cyl*drive->head*drive->sect; - } - hwif->mmio = 1; - ide_device_add(idx); + ide_device_add(idx, NULL); } return 0; diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index a9c6b0609c5..2f0b34d892a 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -154,7 +154,7 @@ static int __init q40ide_init(void) } } - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 37534bb483a..bba29df5f21 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -305,18 +305,33 @@ static int __init qd_testreg(int port) * called to setup an ata channel : adjusts attributes & links for tuning */ -static void __init qd_setup(ide_hwif_t *hwif, int base, int config, - unsigned int data0, unsigned int data1) +static void __init qd_setup(ide_hwif_t *hwif, int base, int config) { - hwif->chipset = ide_qd65xx; - hwif->channel = hwif->index; hwif->select_data = base; hwif->config_data = config; - hwif->drives[0].drive_data = data0; - hwif->drives[1].drive_data = data1; - hwif->drives[0].io_32bit = - hwif->drives[1].io_32bit = 1; - hwif->pio_mask = ATA_PIO4; +} + +static void __init qd6500_port_init_devs(ide_hwif_t *hwif) +{ + u8 base = hwif->select_data, config = QD_CONFIG(hwif); + + hwif->drives[0].drive_data = QD6500_DEF_DATA; + hwif->drives[1].drive_data = QD6500_DEF_DATA; +} + +static void __init qd6580_port_init_devs(ide_hwif_t *hwif) +{ + u16 t1, t2; + u8 base = hwif->select_data, config = QD_CONFIG(hwif); + + if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) { + t1 = QD6580_DEF_DATA; + t2 = QD6580_DEF_DATA2; + } else + t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; + + hwif->drives[0].drive_data = t1; + hwif->drives[1].drive_data = t2; } /* @@ -356,6 +371,14 @@ static void __exit qd_unsetup(ide_hwif_t *hwif) } */ +static const struct ide_port_info qd65xx_port_info __initdata = { + .chipset = ide_qd65xx, + .host_flags = IDE_HFLAG_IO_32BIT | + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE, + .pio_mask = ATA_PIO4, +}; + /* * qd_probe: * @@ -393,13 +416,14 @@ static int __init qd_probe(int base) return 1; } - qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA); + qd_setup(hwif, base, config); + hwif->port_init_devs = qd6500_port_init_devs; hwif->set_pio_mode = &qd6500_set_pio_mode; - idx[0] = unit; + idx[unit] = unit; - ide_device_add(idx); + ide_device_add(idx, &qd65xx_port_info); return 1; } @@ -426,14 +450,15 @@ static int __init qd_probe(int base) hwif = &ide_hwifs[unit]; printk(KERN_INFO "%s: qd6580: single IDE board\n", hwif->name); - qd_setup(hwif, base, config | (control << 8), - QD6580_DEF_DATA, QD6580_DEF_DATA2); + qd_setup(hwif, base, config | (control << 8)); + + hwif->port_init_devs = qd6580_port_init_devs; hwif->set_pio_mode = &qd6580_set_pio_mode; - idx[0] = unit; + idx[unit] = unit; - ide_device_add(idx); + ide_device_add(idx, &qd65xx_port_info); outb(QD_DEF_CONTR, QD_CONTROL_PORT); @@ -447,20 +472,20 @@ static int __init qd_probe(int base) printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n", hwif->name, mate->name); - qd_setup(hwif, base, config | (control << 8), - QD6580_DEF_DATA, QD6580_DEF_DATA); + qd_setup(hwif, base, config | (control << 8)); + hwif->port_init_devs = qd6580_port_init_devs; hwif->set_pio_mode = &qd6580_set_pio_mode; - qd_setup(mate, base, config | (control << 8), - QD6580_DEF_DATA2, QD6580_DEF_DATA2); + qd_setup(mate, base, config | (control << 8)); + mate->port_init_devs = qd6580_port_init_devs; mate->set_pio_mode = &qd6580_set_pio_mode; idx[0] = 0; idx[1] = 1; - ide_device_add(idx); + ide_device_add(idx, &qd65xx_port_info); outb(QD_DEF_CONTR, QD_CONTROL_PORT); diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index 26f38ce5877..5696ba02600 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -120,9 +120,14 @@ static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&ide_lock, flags); } +static const struct ide_port_info umc8672_port_info __initdata = { + .chipset = ide_umc8672, + .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, + .pio_mask = ATA_PIO4, +}; + static int __init umc8672_probe(void) { - ide_hwif_t *hwif, *mate; unsigned long flags; static u8 idx[4] = { 0, 1, 0xff, 0xff }; @@ -143,21 +148,10 @@ static int __init umc8672_probe(void) umc_set_speeds (current_speeds); local_irq_restore(flags); - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - - hwif->chipset = ide_umc8672; - hwif->pio_mask = ATA_PIO4; - hwif->set_pio_mode = &umc_set_pio_mode; - hwif->mate = mate; - - mate->chipset = ide_umc8672; - mate->pio_mask = ATA_PIO4; - mate->set_pio_mode = &umc_set_pio_mode; - mate->mate = hwif; - mate->channel = 1; + ide_hwifs[0].set_pio_mode = &umc_set_pio_mode; + ide_hwifs[1].set_pio_mode = &umc_set_pio_mode; - ide_device_add(idx); + ide_device_add(idx, &umc8672_port_info); return 0; } diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index cd42b30a7a3..0f4bf5d7283 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -548,6 +548,17 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); } +static const struct ide_port_info au1xxx_port_info = { + .host_flags = IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_NO_IO_32BIT | + IDE_HFLAG_UNMASK_IRQS, + .pio_mask = ATA_PIO4, +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + .mwdma_mask = ATA_MWDMA2, +#endif +}; + static int au_ide_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -606,21 +617,6 @@ static int au_ide_probe(struct device *dev) hwif->dev = dev; - hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */ - hwif->swdma_mask = 0x00; -#else - hwif->mwdma_mask = 0x0; - hwif->swdma_mask = 0x0; -#endif - - hwif->pio_mask = ATA_PIO4; - hwif->host_flags = IDE_HFLAG_POST_SET_MODE; - - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - /* hold should be on in all cases */ hwif->hold = 1; @@ -651,16 +647,9 @@ static int au_ide_probe(struct device *dev) hwif->ide_dma_test_irq = &auide_dma_test_irq; hwif->dma_lost_irq = &auide_dma_lost_irq; #endif - hwif->channel = 0; hwif->select_data = 0; /* no chipset-specific code */ hwif->config_data = 0; /* no chipset-specific code */ - hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ - hwif->drives[1].autotune = 1; - - hwif->drives[0].no_io_32bit = 1; - hwif->drives[1].no_io_32bit = 1; - auide_hwif.hwif = hwif; hwif->hwif_data = &auide_hwif; @@ -671,7 +660,7 @@ static int au_ide_probe(struct device *dev) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, &au1xxx_port_info); dev_set_drvdata(dev, hwif); @@ -688,7 +677,7 @@ static int au_ide_remove(struct device *dev) ide_hwif_t *hwif = dev_get_drvdata(dev); _auide_hwif *ahwif = &auide_hwif; - ide_unregister(hwif->index); + ide_unregister(hwif->index, 0, 0); iounmap((void *)ahwif->regbase); diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 8b3959dfa2b..956259fc09b 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -129,7 +129,7 @@ static int __devinit swarm_ide_probe(struct device *dev) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); dev_set_drvdata(dev, hwif); diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 824df78c701..cfb3265bc1a 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -7,7 +7,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -166,6 +165,16 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch return dev->irq; } +static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01; + + pci_read_config_byte(dev, 0x49, &ata66); + + return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -174,21 +183,10 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) hwif->set_dma_mode = &aec6210_set_mode; - else + else { hwif->set_dma_mode = &aec6260_set_mode; - if (hwif->dma_base == 0) - return; - - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) { - u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01; - - pci_read_config_byte(dev, 0x49, &ata66); - - hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; + hwif->cable_detect = atp86x_cable_detect; } } diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 130cc6e784e..b3b6f514ce2 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -31,7 +31,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -666,13 +665,12 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) hwif->set_dma_mode = &ali_set_dma_mode; hwif->udma_filter = &ali_udma_filter; + hwif->cable_detect = ata66_ali15x3; + if (hwif->dma_base == 0) return; hwif->dma_setup = &ali15x3_dma_setup; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_ali15x3(hwif); } /** diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 8c52bc9eaa5..2ef890ce809 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -17,12 +17,9 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> -#include <asm/io.h> #include "ide-timing.h" @@ -199,6 +196,14 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, return dev->irq; } +static u8 __devinit amd_cable_detect(ide_hwif_t *hwif) +{ + if ((amd_80w >> hwif->channel) & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -209,15 +214,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) hwif->set_pio_mode = &amd_set_pio_mode; hwif->set_dma_mode = &amd_set_drive; - if (!hwif->dma_base) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) { - if ((amd_80w >> hwif->channel) & 1) - hwif->cbl = ATA_CBL_PATA80; - else - hwif->cbl = ATA_CBL_PATA40; - } + hwif->cable_detect = amd_cable_detect; } #define IDE_HFLAGS_AMD \ diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index b56274af178..7e037c880cb 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -6,15 +6,11 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/ioport.h> #include <linux/pci.h> #include <linux/hdreg.h> #include <linux/ide.h> -#include <linux/delay.h> #include <linux/init.h> -#include <asm/io.h> - #define ATIIXP_IDE_PIO_TIMING 0x40 #define ATIIXP_IDE_MDMA_TIMING 0x44 #define ATIIXP_IDE_PIO_CONTROL 0x48 @@ -121,6 +117,19 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) spin_unlock_irqrestore(&atiixp_lock, flags); } +static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *pdev = to_pci_dev(hwif->dev); + u8 udma_mode = 0, ch = hwif->channel; + + pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); + + if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + /** * init_hwif_atiixp - fill in the hwif for the ATIIXP * @hwif: IDE interface @@ -131,21 +140,10 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) { - struct pci_dev *pdev = to_pci_dev(hwif->dev); - u8 udma_mode = 0, ch = hwif->channel; - hwif->set_pio_mode = &atiixp_set_pio_mode; hwif->set_dma_mode = &atiixp_set_dma_mode; - if (!hwif->dma_base) - return; - - pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); - - if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) - hwif->cbl = ATA_CBL_PATA80; - else - hwif->cbl = ATA_CBL_PATA40; + hwif->cable_detect = atiixp_cable_detect; } static const struct ide_port_info atiixp_pci_info[] __devinitdata = { diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index 7240c20b959..bd24dad3cfc 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -103,10 +103,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -703,6 +699,18 @@ static int pci_conf2(void) return 0; } +static const struct ide_port_info cmd640_port_info __initdata = { + .chipset = ide_cmd640, + .host_flags = IDE_HFLAG_SERIALIZE | + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE | + IDE_HFLAG_ABUSE_PREFETCH | + IDE_HFLAG_ABUSE_FAST_DEVSEL, +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + .pio_mask = ATA_PIO5, +#endif +}; + /* * Probe for a cmd640 chipset, and initialize it if found. */ @@ -760,11 +768,7 @@ static int __init cmd640x_init(void) setup_device_ptrs (); printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n", cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr); - cmd_hwif0->chipset = ide_cmd640; #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH | - IDE_HFLAG_ABUSE_FAST_DEVSEL; - cmd_hwif0->pio_mask = ATA_PIO5; cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ @@ -815,23 +819,14 @@ static int __init cmd640x_init(void) * Initialize data for secondary cmd640 port, if enabled */ if (second_port_cmd640) { - cmd_hwif0->serialized = 1; - cmd_hwif1->serialized = 1; - cmd_hwif1->chipset = ide_cmd640; - cmd_hwif0->mate = cmd_hwif1; - cmd_hwif1->mate = cmd_hwif0; - cmd_hwif1->channel = 1; #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH | - IDE_HFLAG_ABUSE_FAST_DEVSEL; - cmd_hwif1->pio_mask = ATA_PIO5; cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ idx[1] = cmd_hwif1->index; } printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, - cmd_hwif0->serialized ? "" : "not ", port2); + second_port_cmd640 ? "" : "not ", port2); /* * Establish initial timings/prefetch for all drives. @@ -876,7 +871,7 @@ static int __init cmd640x_init(void) cmd640_dump_regs(); #endif - ide_device_add(idx); + ide_device_add(idx, &cmd640_port_info); return 1; } diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 04aa9e59670..edabe6299ef 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -393,6 +392,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) hwif->set_pio_mode = &cmd64x_set_pio_mode; hwif->set_dma_mode = &cmd64x_set_dma_mode; + hwif->cable_detect = ata66_cmd64x; + if (!hwif->dma_base) return; @@ -411,9 +412,6 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5) hwif->ultra_mask = 0x00; - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_cmd64x(hwif); - switch (dev->device) { case PCI_DEVICE_ID_CMD_648: case PCI_DEVICE_ID_CMD_649: diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index eb68a9ad0c9..0be1a824102 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -35,22 +35,12 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> - -#include <linux/interrupt.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/dma-mapping.h> -#include <asm/io.h> -#include <asm/irq.h> - struct pio_clocks { int address; @@ -180,7 +170,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic ide_pci_setup_ports(dev, d, 14, &idx[0]); - ide_device_add(idx); + ide_device_add(idx, d); return 0; } diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 765aac397ce..941a1344820 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -15,18 +15,12 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> -#include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> + #include <asm/io.h> -#include <asm/irq.h> /* * Here are the standard PIO mode 0-4 timings for each "format". diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 66433aa53f5..d7b5ea992e9 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -155,8 +155,9 @@ static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) cs5535_set_speed(drive, XFER_PIO_0 + pio); } -static u8 __devinit cs5535_cable_detect(struct pci_dev *dev) +static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif) { + struct pci_dev *dev = to_pci_dev(hwif->dev); u8 bit; /* if a 80 wire cable was detected */ @@ -175,15 +176,10 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev) */ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - hwif->set_pio_mode = &cs5535_set_pio_mode; hwif->set_dma_mode = &cs5535_set_dma_mode; - if (hwif->dma_base == 0) - return; - - hwif->cbl = cs5535_cable_detect(dev); + hwif->cable_detect = cs5535_cable_detect; } static const struct ide_port_info cs5535_chipset __devinitdata = { diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 50100ac8770..724cbacf4e5 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -45,7 +45,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/ide.h> #include <linux/init.h> diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 27e47fc9710..3f9cd64c26a 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -16,15 +16,14 @@ * License. See the file COPYING in the main directory of this archive for * more details. */ -#include <linux/autoconf.h> + #include <linux/types.h> #include <linux/module.h> -#include <linux/mm.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> #include <linux/pci.h> + #include <asm/io.h> /* @@ -52,6 +51,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_hwif_t *hwif = NULL; ide_drive_t *drive; int i, rc; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; rc = pci_enable_device(dev); if (rc) { @@ -78,12 +78,27 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) hw.irq = dev->irq; hw.chipset = ide_pci; /* this enables IRQ sharing */ - rc = ide_register_hw(&hw, &ide_undecoded_slave, &hwif); - if (rc < 0) { - printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc); - pci_disable_device(dev); - return -ENODEV; - } + hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif == NULL) + goto out_disable; + + i = hwif->index; + + if (hwif->present) + ide_unregister(i, 0, 0); + else if (!hwif->hold) + ide_init_port_data(hwif, i); + + ide_init_port_hw(hwif, &hw); + hwif->quirkproc = &ide_undecoded_slave; + + idx[0] = i; + + ide_device_add(idx, NULL); + + if (!hwif->present) + goto out_disable; + pci_set_drvdata(dev, hwif); hwif->dev = &dev->dev; drive = &hwif->drives[0]; @@ -92,6 +107,11 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) drive->unmask = 1; } return 0; + +out_disable: + printk(KERN_ERR "delkin_cb: no IDE devices found\n"); + pci_disable_device(dev); + return -ENODEV; } static void @@ -100,7 +120,8 @@ delkin_cb_remove (struct pci_dev *dev) ide_hwif_t *hwif = pci_get_drvdata(dev); if (hwif) - ide_unregister(hwif->index); + ide_unregister(hwif->index, 0, 0); + pci_disable_device(dev); } diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 59ebe84f105..9262a9174b4 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -22,18 +22,11 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> -#include <asm/io.h> - static int ide_generic_all; /* Set to claim all devices */ /* diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index 25dbb814822..9f01da46b01 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -26,20 +26,13 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> -#include <asm/io.h> -#include <asm/irq.h> - #define HPT343_DEBUG_DRIVE_INFO 0 static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 5623cad569d..d0f7bb8b8ad 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -121,12 +121,8 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> #include <linux/blkdev.h> #include <linux/hdreg.h> - #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> @@ -134,7 +130,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/irq.h> /* various tuning parameters */ #define HPT_RESET_STATE_ENGINE @@ -1279,12 +1274,55 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha return dev->irq; } +static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + struct hpt_info *info = pci_get_drvdata(dev); + u8 chip_type = info->chip_type; + u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; + + /* + * The HPT37x uses the CBLID pins as outputs for MA15/MA16 + * address lines to access an external EEPROM. To read valid + * cable detect state the pins must be enabled as inputs. + */ + if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { + /* + * HPT374 PCI function 1 + * - set bit 15 of reg 0x52 to enable TCBLID as input + * - set bit 15 of reg 0x56 to enable FCBLID as input + */ + u8 mcr_addr = hwif->select_data + 2; + u16 mcr; + + pci_read_config_word(dev, mcr_addr, &mcr); + pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); + /* now read cable id register */ + pci_read_config_byte(dev, 0x5a, &scr1); + pci_write_config_word(dev, mcr_addr, mcr); + } else if (chip_type >= HPT370) { + /* + * HPT370/372 and 374 pcifn 0 + * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs + */ + u8 scr2 = 0; + + pci_read_config_byte(dev, 0x5b, &scr2); + pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); + /* now read cable id register */ + pci_read_config_byte(dev, 0x5a, &scr1); + pci_write_config_byte(dev, 0x5b, scr2); + } else + pci_read_config_byte(dev, 0x5a, &scr1); + + return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct hpt_info *info = pci_get_drvdata(dev); int serialize = HPT_SERIALIZE_IO; - u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; u8 chip_type = info->chip_type; u8 new_mcr, old_mcr = 0; @@ -1301,6 +1339,8 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->udma_filter = &hpt3xx_udma_filter; hwif->mdma_filter = &hpt3xx_mdma_filter; + hwif->cable_detect = hpt3xx_cable_detect; + /* * HPT3xxN chips have some complications: * @@ -1346,43 +1386,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) if (hwif->dma_base == 0) return; - /* - * The HPT37x uses the CBLID pins as outputs for MA15/MA16 - * address lines to access an external EEPROM. To read valid - * cable detect state the pins must be enabled as inputs. - */ - if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { - /* - * HPT374 PCI function 1 - * - set bit 15 of reg 0x52 to enable TCBLID as input - * - set bit 15 of reg 0x56 to enable FCBLID as input - */ - u8 mcr_addr = hwif->select_data + 2; - u16 mcr; - - pci_read_config_word (dev, mcr_addr, &mcr); - pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); - /* now read cable id register */ - pci_read_config_byte (dev, 0x5a, &scr1); - pci_write_config_word(dev, mcr_addr, mcr); - } else if (chip_type >= HPT370) { - /* - * HPT370/372 and 374 pcifn 0 - * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs - */ - u8 scr2 = 0; - - pci_read_config_byte (dev, 0x5b, &scr2); - pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); - /* now read cable id register */ - pci_read_config_byte (dev, 0x5a, &scr1); - pci_write_config_byte(dev, 0x5b, scr2); - } else - pci_read_config_byte (dev, 0x5a, &scr1); - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; - if (chip_type >= HPT374) { hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; hwif->ide_dma_end = &hpt374_ide_dma_end; diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index df74e588a53..e3427eaab43 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -10,13 +10,10 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> -#include <asm/io.h> - /** * it8213_set_pio_mode - set host controller for PIO mode * @drive: drive @@ -143,6 +140,16 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) } } +static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 reg42h = 0; + + pci_read_config_byte(dev, 0x42, ®42h); + + return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + /** * init_hwif_it8213 - set up hwif structs * @hwif: interface to set up @@ -152,19 +159,10 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) static void __devinit init_hwif_it8213(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 reg42h = 0; - hwif->set_dma_mode = &it8213_set_dma_mode; hwif->set_pio_mode = &it8213_set_pio_mode; - if (!hwif->dma_base) - return; - - pci_read_config_byte(dev, 0x42, ®42h); - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; + hwif->cable_detect = it8213_cable_detect; } diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 938d35f35c8..1597f0cc1bf 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -63,13 +63,10 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> -#include <asm/io.h> - struct it821x_dev { unsigned int smart:1, /* Are we in smart raid mode */ @@ -579,14 +576,13 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) } else hwif->host_flags |= IDE_HFLAG_NO_SET_MODE; + hwif->cable_detect = ata66_it821x; + if (hwif->dma_base == 0) return; hwif->ultra_mask = ATA_UDMA6; hwif->mwdma_mask = ATA_MWDMA2; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_it821x(hwif); } static void __devinit it8212_disable_raid(struct pci_dev *dev) diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index 8b40f6479c5..a56bcb4f22f 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -8,13 +8,10 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> -#include <asm/io.h> - typedef enum { PORT_PATA0 = 0, PORT_PATA1 = 1, @@ -111,11 +108,7 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) hwif->set_pio_mode = &jmicron_set_pio_mode; hwif->set_dma_mode = &jmicron_set_dma_mode; - if (hwif->dma_base == 0) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_jmicron(hwif); + hwif->cable_detect = ata66_jmicron; } static const struct ide_port_info jmicron_chipset __devinitdata = { diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index fc9eee9ccac..bf0d3b2931f 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -10,11 +10,7 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> #include <linux/interrupt.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/pci.h> #include <linux/delay.h> diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 0ce92d32303..46e8748f507 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -87,11 +87,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/pci.h> #include <linux/hdreg.h> #include <linux/ide.h> @@ -320,14 +315,18 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&opti621_lock, flags); } +static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) +{ + hwif->drives[0].drive_data = PIO_DONT_KNOW; + hwif->drives[1].drive_data = PIO_DONT_KNOW; +} + /* * init_hwif_opti621() is called once for each hwif found at boot. */ static void __devinit init_hwif_opti621 (ide_hwif_t *hwif) { - hwif->drives[0].drive_data = PIO_DONT_KNOW; - hwif->drives[1].drive_data = PIO_DONT_KNOW; - + hwif->port_init_devs = opti621_port_init_devs; hwif->set_pio_mode = &opti621_set_pio_mode; } diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index bb29db03540..1c8cb7797a4 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -19,18 +19,12 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> -#include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/irq.h> #ifdef CONFIG_PPC_PMAC #include <asm/prom.h> @@ -197,7 +191,7 @@ static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) } } -static u8 pdcnew_cable_detect(ide_hwif_t *hwif) +static u8 __devinit pdcnew_cable_detect(ide_hwif_t *hwif) { if (get_indexed_reg(hwif, 0x0b) & 0x04) return ATA_CBL_PATA40; @@ -456,11 +450,7 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->quirkproc = &pdcnew_quirkproc; hwif->resetproc = &pdcnew_reset; - if (hwif->dma_base == 0) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = pdcnew_cable_detect(hwif); + hwif->cable_detect = pdcnew_cable_detect; } static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 31a1308414a..da432979038 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -32,18 +32,13 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> #include <linux/blkdev.h> #include <linux/hdreg.h> -#include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/irq.h> #define PDC202XX_DEBUG_DRIVE_INFO 0 @@ -140,10 +135,10 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) pdc202xx_set_mode(drive, XFER_PIO_0 + pio); } -static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif) +static u8 __devinit pdc2026x_old_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10); + u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10); pci_read_config_word(dev, 0x50, &CIS); @@ -311,9 +306,12 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) hwif->quirkproc = &pdc202xx_quirkproc; - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) + if (dev->device != PCI_DEVICE_ID_PROMISE_20246) { hwif->resetproc = &pdc202xx_reset; + hwif->cable_detect = pdc2026x_old_cable_detect; + } + if (hwif->dma_base == 0) return; @@ -321,9 +319,6 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) hwif->dma_timeout = &pdc202xx_dma_timeout; if (dev->device != PCI_DEVICE_ID_PROMISE_20246) { - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = pdc202xx_old_cable_detect(hwif); - hwif->dma_start = &pdc202xx_old_ide_dma_start; hwif->ide_dma_end = &pdc202xx_old_ide_dma_end; } diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index c1a6b68337d..decef0f4767 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -47,11 +47,9 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/ioport.h> #include <linux/pci.h> #include <linux/hdreg.h> #include <linux/ide.h> -#include <linux/delay.h> #include <linux/init.h> #include <asm/io.h> @@ -290,14 +288,11 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) hwif->set_pio_mode = &piix_set_pio_mode; hwif->set_dma_mode = &piix_set_dma_mode; + hwif->cable_detect = piix_cable_detect; + if (!hwif->dma_base) return; - if (hwif->ultra_mask & 0x78) { - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = piix_cable_detect(hwif); - } - if (no_piix_dma) hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0; } diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c index 7ed6625819d..51676612f78 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/pci/rz1000.c @@ -16,18 +16,11 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/init.h> -#include <asm/io.h> - static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -40,8 +33,7 @@ static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif) } else { if (hwif->mate) hwif->mate->serialized = hwif->serialized = 1; - hwif->drives[0].no_unmask = 1; - hwif->drives[1].no_unmask = 1; + hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS; printk(KERN_INFO "%s: serialized, disabled unmasking " "(buggy RZ1000/RZ1001)\n", hwif->name); } diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index af499a60eb3..561aa47c772 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -14,19 +14,13 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> -#include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> #include <linux/pm.h> + #include <asm/io.h> -#include <asm/irq.h> #define SC1200_REV_A 0x00 #define SC1200_REV_B1 0x01 diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 7694969b02c..238e3e181e8 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -644,6 +644,11 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif) init_mmio_iops_scc(hwif); } +static u8 __devinit scc_cable_detect(ide_hwif_t *hwif) +{ + return ATA_CBL_PATA80; +} + /** * init_hwif_scc - set up hwif * @hwif: interface to set up @@ -678,8 +683,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) else hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ - /* we support 80c cable only. */ - hwif->cbl = ATA_CBL_PATA80; + hwif->cable_detect = scc_cable_detect; } #define DECLARE_SCC_DEV(name_str) \ @@ -732,7 +736,7 @@ static void __devexit scc_remove(struct pci_dev *dev) hwif->dmatable_cpu = NULL; } - ide_unregister(hwif->index); + ide_unregister(hwif->index, 0, 0); hwif->chipset = ide_unknown; iounmap((void*)ports->dma); diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index f495253b7d4..c11880b0709 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -31,12 +31,10 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/ioport.h> #include <linux/pci.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> -#include <linux/delay.h> #include <asm/io.h> @@ -346,13 +344,8 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) hwif->set_dma_mode = &svwks_set_dma_mode; hwif->udma_filter = &svwks_udma_filter; - if (!hwif->dma_base) - return; - - if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_svwks(hwif); - } + if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) + hwif->cable_detect = ata66_svwks; } #define IDE_HFLAGS_SVWKS \ diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 85902074b1f..054626497be 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -25,8 +25,6 @@ #include <linux/hdreg.h> #include <linux/init.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/ioport.h> #include <linux/blkdev.h> #include <linux/scatterlist.h> @@ -555,7 +553,6 @@ static void __devinit ide_init_sgiioc4(ide_hwif_t * hwif) { hwif->mmio = 1; - hwif->pio_mask = 0x00; hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */ hwif->set_dma_mode = &sgiioc4_set_dma_mode; hwif->selectproc = NULL;/* Use the default routine to select drive */ @@ -572,8 +569,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif) if (hwif->dma_base == 0) return; - hwif->mwdma_mask = ATA_MWDMA2_ONLY; - hwif->dma_host_set = &sgiioc4_dma_host_set; hwif->dma_setup = &sgiioc4_ide_dma_setup; hwif->dma_start = &sgiioc4_ide_dma_start; @@ -583,6 +578,13 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->dma_timeout = &ide_dma_timeout; } +static const struct ide_port_info sgiioc4_port_info __devinitdata = { + .chipset = ide_pci, + .host_flags = IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_NO_AUTOTUNE, + .mwdma_mask = ATA_MWDMA2_ONLY, +}; + static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev) { @@ -593,6 +595,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) int h; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw; + struct ide_port_info d = sgiioc4_port_info; /* * Find an empty HWIF; if none available, return -ENOMEM. @@ -641,7 +644,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) ide_init_port_hw(hwif, &hw); hwif->dev = &dev->dev; - hwif->channel = 0; /* Single Channel chip */ /* The IOC4 uses MMIO rather than Port IO. */ default_hwif_mmiops(hwif); @@ -649,15 +651,17 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) /* Initializing chipset IRQ Registers */ writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4)); - if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) + if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) { printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n", hwif->name, DRV_NAME); + d.mwdma_mask = 0; + } ide_init_sgiioc4(hwif); idx[0] = hwif->index; - if (ide_device_add(idx)) + if (ide_device_add(idx, &d)) return -EIO; return 0; diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 4877bc8cd59..ef5b39fa042 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -39,7 +39,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/init.h> @@ -332,15 +331,18 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long addr = siimage_selreg(hwif, 0x1); + void __iomem *sata_error_addr + = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET]; - if (SATA_ERROR_REG) { + if (sata_error_addr) { unsigned long base = (unsigned long)hwif->hwif_data; - u32 ext_stat = readl((void __iomem *)(base + 0x10)); u8 watchdog = 0; + if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) { - u32 sata_error = readl((void __iomem *)SATA_ERROR_REG); - writel(sata_error, (void __iomem *)SATA_ERROR_REG); + u32 sata_error = readl(sata_error_addr); + + writel(sata_error, sata_error_addr); watchdog = (sata_error & 0x00680000) ? 1 : 0; printk(KERN_WARNING "%s: sata_error = 0x%08x, " "watchdog = %d, %s\n", @@ -419,13 +421,17 @@ static int sil_sata_busproc(ide_drive_t * drive, int state) static int sil_sata_reset_poll(ide_drive_t *drive) { - if (SATA_STATUS_REG) { - ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *hwif = drive->hwif; + void __iomem *sata_status_addr + = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET]; - /* SATA_STATUS_REG is valid only when in MMIO mode */ - if ((readl((void __iomem *)SATA_STATUS_REG) & 0x03) != 0x03) { + if (sata_status_addr) { + /* SATA Status is available only when in MMIO mode */ + u32 sata_stat = readl(sata_status_addr); + + if ((sata_stat & 0x03) != 0x03) { printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", - hwif->name, readl((void __iomem *)SATA_STATUS_REG)); + hwif->name, sata_stat); HWGROUP(drive)->polling = 0; return ide_started; } @@ -827,15 +833,14 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) } else hwif->udma_filter = &sil_pata_udma_filter; + hwif->cable_detect = ata66_siimage; + if (hwif->dma_base == 0) return; if (sata) hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_siimage(hwif); - if (hwif->mmio) { hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq; } else { diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 2a461de22aa..512bb4c1fd5 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -47,20 +47,11 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> - -#include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> -#include <asm/irq.h> - #include "ide-timing.h" /* registers layout and init values are chipset family dependant */ @@ -565,13 +556,12 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) if (chipset_family >= ATA_133) hwif->udma_filter = sis5513_ata133_udma_filter; + hwif->cable_detect = ata66_sis5513; + if (hwif->dma_base == 0) return; hwif->ultra_mask = udma_rates[chipset_family]; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_sis5513(hwif); } static const struct ide_port_info sis5513_chipset __devinitdata = { diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index da13a1298ad..ee261ae15b6 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -17,17 +17,11 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/dma.h> #undef DEBUG diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index a6cf810c469..65f4c2ffaa5 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -10,15 +10,11 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/ioport.h> #include <linux/pci.h> #include <linux/hdreg.h> #include <linux/ide.h> -#include <linux/delay.h> #include <linux/init.h> -#include <asm/io.h> - static DEFINE_SPINLOCK(slc90e66_lock); static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) @@ -118,23 +114,23 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) } } -static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif) +static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 reg47 = 0; - u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */ - - hwif->set_pio_mode = &slc90e66_set_pio_mode; - hwif->set_dma_mode = &slc90e66_set_dma_mode; + u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02; pci_read_config_byte(dev, 0x47, ®47); - if (hwif->dma_base == 0) - return; + /* bit[0(1)]: 0:80, 1:40 */ + return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + +static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif) +{ + hwif->set_pio_mode = &slc90e66_set_pio_mode; + hwif->set_dma_mode = &slc90e66_set_dma_mode; - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - /* bit[0(1)]: 0:80, 1:40 */ - hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; + hwif->cable_detect = slc90e66_cable_detect; } static const struct ide_port_info slc90e66_chipset __devinitdata = { diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index 9fbbb4f2dd5..2ef2ed2f2b3 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -160,6 +160,19 @@ static int tc86c001_busproc(ide_drive_t *drive, int state) return 0; } +static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long sc_base = pci_resource_start(dev, 5); + u16 scr1 = inw(sc_base + 0x00); + + /* + * System Control 1 Register bit 13 (PDIAGN): + * 0=80-pin cable, 1=40-pin cable + */ + return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -183,6 +196,8 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) hwif->busproc = &tc86c001_busproc; + hwif->cable_detect = tc86c001_cable_detect; + if (!hwif->dma_base) return; @@ -196,15 +211,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) hwif->rqsize = 0xffff; hwif->dma_start = &tc86c001_dma_start; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) { - /* - * System Control 1 Register bit 13 (PDIAGN): - * 0=80-pin cable, 1=40-pin cable - */ - scr1 = inw(sc_base + 0x00); - hwif->cbl = (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; - } } static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev, diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index 852b7269373..a67d02a3f96 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -28,11 +28,6 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/pci.h> #include <linux/ide.h> diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index d9ebb698953..de750f7a43e 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -131,14 +131,12 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/mm.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/init.h> #include <linux/hdreg.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/ide.h> #include <asm/io.h> @@ -179,10 +177,7 @@ static void trm290_selectproc (ide_drive_t *drive) static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command) { - BUG_ON(HWGROUP(drive)->handler != NULL); /* paranoia check */ - ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL); - /* issue cmd to drive */ - outb(command, IDE_COMMAND_REG); + ide_execute_command(drive, command, &ide_dma_intr, WAIT_CMD, NULL); } static int trm290_dma_setup(ide_drive_t *drive) diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 24cb9047fb4..f3f79f80581 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -26,15 +26,11 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/ide.h> #include <linux/dmi.h> -#include <asm/io.h> - #ifdef CONFIG_PPC_CHRP #include <asm/processor.h> #endif @@ -424,11 +420,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) hwif->set_pio_mode = &via_set_pio_mode; hwif->set_dma_mode = &via_set_drive; - if (!hwif->dma_base) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = via82cxxx_cable_detect(hwif); + hwif->cable_detect = via82cxxx_cable_detect; } static const struct ide_port_info via82cxxx_chipset __devinitdata = { diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 45c1d55e60d..06190b1c4ec 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -848,7 +848,7 @@ static int __init mpc8xx_ide_probe(void) #endif #endif - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 23112ef68f6..12ac3bfb4f9 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -412,7 +412,7 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time) */ #define IDE_WAKEUP_DELAY (1*HZ) -static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif); +static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif); static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); @@ -1003,6 +1003,17 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static const struct ide_port_info pmac_port_info = { + .chipset = ide_pmac, + .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | + IDE_HFLAG_PIO_NO_DOWNGRADE | + IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_UNMASK_IRQS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, +}; + /* * Setup, register & probe an IDE channel driven by this driver, this is * called by one of the 2 probe functions (macio or PCI). Note that a channel @@ -1016,23 +1027,28 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) struct device_node *np = pmif->node; const int *bidp; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + struct ide_port_info d = pmac_port_info; pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; - if (of_device_is_compatible(np, "shasta-ata")) + if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; - else if (of_device_is_compatible(np, "kauai-ata")) + d.udma_mask = ATA_UDMA6; + } else if (of_device_is_compatible(np, "kauai-ata")) { pmif->kind = controller_un_ata6; - else if (of_device_is_compatible(np, "K2-UATA")) + d.udma_mask = ATA_UDMA5; + } else if (of_device_is_compatible(np, "K2-UATA")) { pmif->kind = controller_k2_ata6; - else if (of_device_is_compatible(np, "keylargo-ata")) { - if (strcmp(np->name, "ata-4") == 0) + d.udma_mask = ATA_UDMA5; + } else if (of_device_is_compatible(np, "keylargo-ata")) { + if (strcmp(np->name, "ata-4") == 0) { pmif->kind = controller_kl_ata4; - else + d.udma_mask = ATA_UDMA4; + } else pmif->kind = controller_kl_ata3; - } else if (of_device_is_compatible(np, "heathrow-ata")) + } else if (of_device_is_compatible(np, "heathrow-ata")) { pmif->kind = controller_heathrow; - else { + } else { pmif->kind = controller_ohare; pmif->broken_dma = 1; } @@ -1101,19 +1117,10 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) /* Tell common code _not_ to mess with resources */ hwif->mmio = 1; hwif->hwif_data = pmif; - hw->chipset = ide_pmac; ide_init_port_hw(hwif, hw); hwif->noprobe = pmif->mediabay; hwif->hold = pmif->mediabay; hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - hwif->drives[0].autotune = IDE_TUNE_AUTO; - hwif->drives[1].autotune = IDE_TUNE_AUTO; - hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | - IDE_HFLAG_PIO_NO_DOWNGRADE | - IDE_HFLAG_POST_SET_MODE; - hwif->pio_mask = ATA_PIO4; hwif->set_pio_mode = pmac_ide_set_pio_mode; if (pmif->kind == controller_un_ata6 || pmif->kind == controller_k2_ata6 @@ -1133,14 +1140,16 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) #endif /* CONFIG_PMAC_MEDIABAY */ #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (pmif->cable_80 == 0) + d.udma_mask &= ATA_UDMA2; /* has a DBDMA controller channel */ - if (pmif->dma_regs) - pmac_ide_setup_dma(pmif, hwif); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0) +#endif + d.udma_mask = d.mwdma_mask = 0; idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, &d); return 0; } @@ -1721,8 +1730,7 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive) * Allocate the data structures needed for using DMA with an interface * and fill the proper list of functions pointers */ -static void __devinit -pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) +static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -1730,7 +1738,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) * DMA routines ... */ if (dev == NULL) - return; + return -ENODEV; /* * Allocate space for the DBDMA commands. * The +2 is +1 for the stop command and +1 to allow for @@ -1743,7 +1751,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) if (pmif->dma_table_cpu == NULL) { printk(KERN_ERR "%s: unable to allocate DMA command list\n", hwif->name); - return; + return -ENOMEM; } hwif->sg_max_nents = MAX_DCMDS; @@ -1757,29 +1765,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->dma_timeout = &ide_dma_timeout; hwif->dma_lost_irq = &pmac_ide_dma_lost_irq; - switch(pmif->kind) { - case controller_sh_ata6: - hwif->ultra_mask = pmif->cable_80 ? 0x7f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - case controller_un_ata6: - case controller_k2_ata6: - hwif->ultra_mask = pmif->cable_80 ? 0x3f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - case controller_kl_ata4: - hwif->ultra_mask = pmif->cable_80 ? 0x1f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - default: - hwif->ultra_mask = 0x00; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - } + return 0; } #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 05db429a7da..634e3f6a960 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -339,7 +339,8 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * ide_hwif_configure - configure an IDE interface * @dev: PCI device holding interface * @d: IDE port info - * @mate: Paired interface if any + * @port: port number + * @irq: PCI IRQ * * Perform the initial set up for the hardware interface structure. This * is done per interface port rather than per PCI device. There may be @@ -348,7 +349,9 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * Returns the new hardware interface structure, or NULL on a failure */ -static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *mate, int port, int irq) +static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, + const struct ide_port_info *d, + unsigned int port, int irq) { unsigned long ctl = 0, base = 0; ide_hwif_t *hwif; @@ -394,29 +397,24 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port hwif->dev = &dev->dev; hwif->cds = d; - hwif->channel = port; - if (mate) { - hwif->mate = mate; - mate->mate = hwif; - } return hwif; } +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI /** * ide_hwif_setup_dma - configure DMA interface - * @dev: PCI device - * @d: IDE port info * @hwif: IDE interface + * @d: IDE port info * * Set up the DMA base for the interface. Enable the master bits as * necessary and attempt to bring the device DMA into a ready to use * state */ -static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *hwif) +void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { -#ifdef CONFIG_BLK_DEV_IDEDMA_PCI + struct pci_dev *dev = to_pci_dev(hwif->dev); u16 pcicmd; pci_read_config_word(dev, PCI_COMMAND, &pcicmd); @@ -448,8 +446,8 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info * "(BIOS)\n", hwif->name, d->name); } } -#endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/ } +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_setup_pci_controller - set up IDE PCI @@ -511,7 +509,7 @@ out: void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; - ide_hwif_t *hwif, *mate = NULL; + ide_hwif_t *hwif; u8 tmp; /* @@ -527,56 +525,11 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int continue; /* port not enabled */ } - if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL) + hwif = ide_hwif_configure(dev, d, port, pciirq); + if (hwif == NULL) continue; *(idx + port) = hwif->index; - - if (d->init_iops) - d->init_iops(hwif); - - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) - ide_hwif_setup_dma(dev, d, hwif); - - if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || - (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) - hwif->irq = port ? 15 : 14; - - hwif->host_flags = d->host_flags; - hwif->pio_mask = d->pio_mask; - - if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) - hwif->mate->serialized = hwif->serialized = 1; - - if (d->host_flags & IDE_HFLAG_IO_32BIT) { - hwif->drives[0].io_32bit = 1; - hwif->drives[1].io_32bit = 1; - } - - if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) { - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - } - - if (hwif->dma_base) { - hwif->swdma_mask = d->swdma_mask; - hwif->mwdma_mask = d->mwdma_mask; - hwif->ultra_mask = d->udma_mask; - } - - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - - if (d->host_flags & IDE_HFLAG_RQSIZE_256) - hwif->rqsize = 256; - - if (d->init_hwif) - /* Call chipset-specific routine - * for each enabled hwif - */ - d->init_hwif(hwif); - - mate = hwif; } } @@ -658,7 +611,7 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) ret = do_ide_setup_pci_device(dev, d, &idx[0], 1); if (ret >= 0) - ide_device_add(idx); + ide_device_add(idx, d); return ret; } @@ -682,7 +635,7 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, goto out; } - ide_device_add(idx); + ide_device_add(idx, d); out: return ret; } diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 18dde2a2720..de9ebbfbf12 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -595,7 +595,7 @@ static void media_bay_step(int i) if (bay->cd_index >= 0) { printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i, bay->cd_index); - ide_unregister(bay->cd_index); + ide_unregister(bay->cd_index, 1, 1); bay->cd_index = -1; } if (bay->cd_retry) { diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 5ed00069846..6c4f0f08178 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -588,19 +588,14 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) hwif->sg_mapped = 0; } - SELECT_DRIVE(drive); - ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma); if (dma) set_bit(PC_DMA_OK, &pc->flags); if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { - BUG_ON(HWGROUP(drive)->handler != NULL); - ide_set_handler(drive, &idescsi_transfer_pc, - get_timeout(pc), idescsi_expiry); - /* Issue the packet command */ - HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, + get_timeout(pc), idescsi_expiry); return ide_started; } else { /* Issue the packet command */ diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index ff43f8d6b5b..3882013d29e 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -706,8 +706,10 @@ struct hd_driveid { */ #define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */ #define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */ -#define IDE_NICE_0 (2) /* when sure that it won't affect us */ #define IDE_NICE_1 (3) /* when probably won't affect us much */ +#ifndef __KERNEL__ +#define IDE_NICE_0 (2) /* when sure that it won't affect us */ #define IDE_NICE_2 (4) /* when we know it's on our expense */ +#endif #endif /* _LINUX_HDREG_H */ diff --git a/include/linux/ide.h b/include/linux/ide.h index ec10b2a3bb6..367c17084a2 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -112,18 +112,12 @@ typedef unsigned char byte; /* used everywhere */ #define SATA_NR_PORTS (3) /* 16 possible ?? */ #define SATA_STATUS_OFFSET (0) -#define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET]) #define SATA_ERROR_OFFSET (1) -#define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET]) #define SATA_CONTROL_OFFSET (2) -#define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET]) #define SATA_MISC_OFFSET (0) -#define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET]) #define SATA_PHY_OFFSET (1) -#define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET]) #define SATA_IEN_OFFSET (2) -#define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET]) /* * Our Physical Region Descriptor (PRD) table should be large enough @@ -196,6 +190,7 @@ typedef struct hw_regs_s { } hw_regs_t; struct hwif_s * ide_find_port(unsigned long); +struct hwif_s *ide_deprecated_find_port(unsigned long); void ide_init_port_data(struct hwif_s *, unsigned int); void ide_init_port_hw(struct hwif_s *, hw_regs_t *); @@ -406,8 +401,6 @@ typedef struct ide_drive_s { unsigned no_unmask : 1; /* disallow setting unmask bit */ unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */ unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */ - unsigned nice0 : 1; /* give obvious excess bandwidth */ - unsigned nice2 : 1; /* give a share in our own bandwidth */ unsigned doorlocking : 1; /* for removable only: door lock/unlock works */ unsigned nodma : 1; /* disallow DMA */ unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */ @@ -487,7 +480,6 @@ typedef struct hwif_s { u8 major; /* our major number */ u8 index; /* 0 for ide0; 1 for ide1; ... */ u8 channel; /* for dual-port chips: 0=primary, 1=secondary */ - u8 straight8; /* Alan's straight 8 check */ u8 bus_state; /* power state of the IDE bus */ u32 host_flags; @@ -513,6 +505,8 @@ typedef struct hwif_s { #if 0 ide_hwif_ops_t *hwifops; #else + /* host specific initialization of devices on a port */ + void (*port_init_devs)(struct hwif_s *); /* routine to program host for PIO mode */ void (*set_pio_mode)(ide_drive_t *, const u8); /* routine to program host for DMA mode */ @@ -535,6 +529,8 @@ typedef struct hwif_s { u8 (*mdma_filter)(ide_drive_t *); u8 (*udma_filter)(ide_drive_t *); + u8 (*cable_detect)(struct hwif_s *); + void (*ata_input_data)(ide_drive_t *, void *, u32); void (*ata_output_data)(ide_drive_t *, void *, u32); @@ -602,10 +598,9 @@ typedef struct hwif_s { unsigned serialized : 1; /* serialized all channel operation */ unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */ unsigned reset : 1; /* reset after probe */ - unsigned auto_poll : 1; /* supports nop auto-poll */ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ - unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */ unsigned mmio : 1; /* host uses MMIO */ + unsigned straight8 : 1; /* Alan's straight 8 check */ struct device gendev; struct completion gendev_rel_comp; /* To deal with device release() */ @@ -625,6 +620,9 @@ typedef struct hwif_s { typedef ide_startstop_t (ide_handler_t)(ide_drive_t *); typedef int (ide_expiry_t)(ide_drive_t *); +/* used by ide-cd, ide-floppy, etc. */ +typedef void (xfer_func_t)(ide_drive_t *, void *, u32); + typedef struct hwgroup_s { /* irq handler, if active */ ide_startstop_t (*handler)(ide_drive_t *); @@ -708,6 +706,7 @@ typedef struct { void proc_ide_create(void); void proc_ide_destroy(void); void ide_proc_register_port(ide_hwif_t *); +void ide_proc_port_register_devices(ide_hwif_t *); void ide_proc_unregister_port(ide_hwif_t *); void ide_proc_register_driver(ide_drive_t *, ide_driver_t *); void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *); @@ -740,6 +739,7 @@ void ide_pci_create_host_proc(const char *, get_info_t *); static inline void proc_ide_create(void) { ; } static inline void proc_ide_destroy(void) { ; } static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; } +static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; } static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; } static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; } static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; } @@ -988,10 +988,8 @@ int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long); extern int system_bus_clock(void); extern int ide_driveid_update(ide_drive_t *); -extern int ide_ata66_check(ide_drive_t *, ide_task_t *); extern int ide_config_drive_speed(ide_drive_t *, u8); extern u8 eighty_ninty_three (ide_drive_t *); -extern int set_transfer(ide_drive_t *, ide_task_t *); extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *); extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout); @@ -1016,6 +1014,13 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *); void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI +void ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); +#else +static inline void ide_hwif_setup_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) { } +#endif + extern void default_hwif_iops(ide_hwif_t *); extern void default_hwif_mmiops(ide_hwif_t *); extern void default_hwif_transport(ide_hwif_t *); @@ -1052,7 +1057,7 @@ enum { IDE_HFLAG_NO_SET_MODE = (1 << 9), /* trust BIOS for programming chipset/device for DMA */ IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10), - /* host uses VDMA */ + /* host uses VDMA (tied with IDE_HFLAG_CS5520 for now) */ IDE_HFLAG_VDMA = (1 << 11), /* ATAPI DMA is unsupported */ IDE_HFLAG_NO_ATAPI_DMA = (1 << 12), @@ -1062,8 +1067,10 @@ enum { IDE_HFLAG_NO_DMA = (1 << 14), /* check if host is PCI IDE device before allowing DMA */ IDE_HFLAG_NO_AUTODMA = (1 << 15), + /* don't autotune PIO */ + IDE_HFLAG_NO_AUTOTUNE = (1 << 16), /* host is CS5510/CS5520 */ - IDE_HFLAG_CS5520 = (1 << 16), + IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA, /* no LBA48 */ IDE_HFLAG_NO_LBA48 = (1 << 17), /* no LBA48 DMA */ @@ -1089,6 +1096,10 @@ enum { IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28), /* DSC overlap is unsupported */ IDE_HFLAG_NO_DSC = (1 << 29), + /* never use 32-bit I/O ops */ + IDE_HFLAG_NO_IO_32BIT = (1 << 30), + /* never unmask IRQs */ + IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31), }; #ifdef CONFIG_BLK_DEV_OFFBOARD @@ -1144,6 +1155,7 @@ void ide_dma_off_quietly(ide_drive_t *); void ide_dma_off(ide_drive_t *); void ide_dma_on(ide_drive_t *); int ide_set_dma(ide_drive_t *); +void ide_check_dma_crc(ide_drive_t *); ide_startstop_t ide_dma_intr(ide_drive_t *); int ide_build_sglist(ide_drive_t *, struct request *); @@ -1171,6 +1183,7 @@ static inline void ide_dma_off(ide_drive_t *drive) { ; } static inline void ide_dma_on(ide_drive_t *drive) { ; } static inline void ide_dma_verbose(ide_drive_t *drive) { ; } static inline int ide_set_dma(ide_drive_t *drive) { return 1; } +static inline void ide_check_dma_crc(ide_drive_t *drive) { ; } #endif /* CONFIG_BLK_DEV_IDEDMA */ #ifndef CONFIG_BLK_DEV_IDEDMA_PCI @@ -1182,27 +1195,29 @@ extern int ide_acpi_exec_tfs(ide_drive_t *drive); extern void ide_acpi_get_timing(ide_hwif_t *hwif); extern void ide_acpi_push_timing(ide_hwif_t *hwif); extern void ide_acpi_init(ide_hwif_t *hwif); +void ide_acpi_port_init_devices(ide_hwif_t *); extern void ide_acpi_set_state(ide_hwif_t *hwif, int on); #else static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; } static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; } static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; } static inline void ide_acpi_init(ide_hwif_t *hwif) { ; } +static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; } static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {} #endif void ide_remove_port_from_hwgroup(ide_hwif_t *); extern int ide_hwif_request_regions(ide_hwif_t *hwif); extern void ide_hwif_release_regions(ide_hwif_t* hwif); -extern void ide_unregister (unsigned int index); +void ide_unregister(unsigned int, int, int); void ide_register_region(struct gendisk *); void ide_unregister_region(struct gendisk *); void ide_undecoded_slave(ide_drive_t *); -int ide_device_add_all(u8 *idx); -int ide_device_add(u8 idx[4]); +int ide_device_add_all(u8 *idx, const struct ide_port_info *); +int ide_device_add(u8 idx[4], const struct ide_port_info *); static inline void *ide_get_hwifdata (ide_hwif_t * hwif) { |