sundance: set carrier status on link change events

Check if the link is available when a changed interrupt has been received and
set the carrier status appropriately.  The code is copied nearly verbatim from
the dl2k module.  The link status could be used in more places in the driver,
but this is enough to get the carrier status reported to userspace.  Fixes
kernel bug #7487:

    http://bugzilla.kernel.org/show_bug.cgi?id=7487

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 62 insertions, 33 deletions

diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 7d5561b8241..f860ea15039 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -409,6 +409,7 @@ static int  change_mtu(struct net_device *dev, int new_mtu);
 static int  eeprom_read(void __iomem *ioaddr, int location);
 static int  mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int  mdio_wait_link(struct net_device *dev, int wait);
 static int  netdev_open(struct net_device *dev);
 static void check_duplex(struct net_device *dev);
 static void netdev_timer(unsigned long data);
@@ -785,6 +786,24 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val
 	return;
 }
 
+static int mdio_wait_link(struct net_device *dev, int wait)
+{
+	int bmsr;
+	int phy_id;
+	struct netdev_private *np;
+
+	np = netdev_priv(dev);
+	phy_id = np->phys[0];
+
+	do {
+		bmsr = mdio_read(dev, phy_id, MII_BMSR);
+		if (bmsr & 0x0004)
+			return 0;
+		mdelay(1);
+	} while (--wait > 0);
+	return -1;
+}
+
 static int netdev_open(struct net_device *dev)
 {
 	struct netdev_private *np = netdev_priv(dev);
@@ -1393,41 +1412,51 @@ static void netdev_error(struct net_device *dev, int intr_status)
 	int speed;
 
 	if (intr_status & LinkChange) {
-		if (np->an_enable) {
-			mii_advertise = mdio_read (dev, np->phys[0], MII_ADVERTISE);
-			mii_lpa= mdio_read (dev, np->phys[0], MII_LPA);
-			mii_advertise &= mii_lpa;
-			printk (KERN_INFO "%s: Link changed: ", dev->name);
-			if (mii_advertise & ADVERTISE_100FULL) {
-				np->speed = 100;
-				printk ("100Mbps, full duplex\n");
-			} else if (mii_advertise & ADVERTISE_100HALF) {
-				np->speed = 100;
-				printk ("100Mbps, half duplex\n");
-			} else if (mii_advertise & ADVERTISE_10FULL) {
-				np->speed = 10;
-				printk ("10Mbps, full duplex\n");
-			} else if (mii_advertise & ADVERTISE_10HALF) {
-				np->speed = 10;
-				printk ("10Mbps, half duplex\n");
-			} else
-				printk ("\n");
+		if (mdio_wait_link(dev, 10) == 0) {
+			printk(KERN_INFO "%s: Link up\n", dev->name);
+			if (np->an_enable) {
+				mii_advertise = mdio_read(dev, np->phys[0],
+							   MII_ADVERTISE);
+				mii_lpa = mdio_read(dev, np->phys[0], MII_LPA);
+				mii_advertise &= mii_lpa;
+				printk(KERN_INFO "%s: Link changed: ",
+					dev->name);
+				if (mii_advertise & ADVERTISE_100FULL) {
+					np->speed = 100;
+					printk("100Mbps, full duplex\n");
+				} else if (mii_advertise & ADVERTISE_100HALF) {
+					np->speed = 100;
+					printk("100Mbps, half duplex\n");
+				} else if (mii_advertise & ADVERTISE_10FULL) {
+					np->speed = 10;
+					printk("10Mbps, full duplex\n");
+				} else if (mii_advertise & ADVERTISE_10HALF) {
+					np->speed = 10;
+					printk("10Mbps, half duplex\n");
+				} else
+					printk("\n");
 
+			} else {
+				mii_ctl = mdio_read(dev, np->phys[0], MII_BMCR);
+				speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10;
+				np->speed = speed;
+				printk(KERN_INFO "%s: Link changed: %dMbps ,",
+					dev->name, speed);
+				printk("%s duplex.\n",
+					(mii_ctl & BMCR_FULLDPLX) ?
+						"full" : "half");
+			}
+			check_duplex(dev);
+			if (np->flowctrl && np->mii_if.full_duplex) {
+				iowrite16(ioread16(ioaddr + MulticastFilter1+2) | 0x0200,
+					ioaddr + MulticastFilter1+2);
+				iowrite16(ioread16(ioaddr + MACCtrl0) | EnbFlowCtrl,
+					ioaddr + MACCtrl0);
+			}
+			netif_carrier_on(dev);
 		} else {
-			mii_ctl = mdio_read (dev, np->phys[0], MII_BMCR);
-			speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10;
-			np->speed = speed;
-			printk (KERN_INFO "%s: Link changed: %dMbps ,",
-				dev->name, speed);
-			printk ("%s duplex.\n", (mii_ctl & BMCR_FULLDPLX) ?
-				"full" : "half");
-		}
-		check_duplex (dev);
-		if (np->flowctrl && np->mii_if.full_duplex) {
-			iowrite16(ioread16(ioaddr + MulticastFilter1+2) | 0x0200,
-				ioaddr + MulticastFilter1+2);
-			iowrite16(ioread16(ioaddr + MACCtrl0) | EnbFlowCtrl,
-				ioaddr + MACCtrl0);
+			printk(KERN_INFO "%s: Link down\n", dev->name);
+			netif_carrier_off(dev);
 		}
 	}
 	if (intr_status & StatsMax) {