watchdog: add timeout-sec property binding

this patchset add the timeout-sec property to the following drivers:
orion_wdt, pnx4008_wdt, s3c2410_wdt and at91sam9_wdt.

The at91sam9_wdt is tested on evk-pr3,
the other drivers are compile tested only.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

8 files changed, 31 insertions, 15 deletions

diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index 2957ebb5aa7..fcdd48f7dcf 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -7,9 +7,13 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
 Example:
 
 	watchdog@fffffd40 {
 		compatible = "atmel,at91sam9260-wdt";
 		reg = <0xfffffd40 0x10>;
+		timeout-sec = <10>;
 	};
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
index 0b2503ab0a0..5dc8d30061c 100644
--- a/Documentation/devicetree/bindings/watchdog/marvel.txt
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -5,10 +5,15 @@ Required Properties:
 - Compatibility : "marvell,orion-wdt"
 - reg		: Address of the timer registers
 
+Optional properties:
+
+- timeout-sec	: Contains the watchdog timeout in seconds
+
 Example:
 
 	wdt@20300 {
 		compatible = "marvell,orion-wdt";
 		reg = <0x20300 0x28>;
+		timeout-sec = <10>;
 		status = "okay";
 	};
diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
index 7c7f6887c79..556d06c17c9 100644
--- a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
@@ -5,9 +5,13 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
 Example:
 
 	watchdog@4003C000 {
 		compatible = "nxp,pnx4008-wdt";
 		reg = <0x4003C000 0x1000>;
+		timeout-sec = <10>;
 	};
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index ce0d8e78ed8..2aa486cc1ff 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -9,3 +9,6 @@ Required properties:
 - reg : base physical address of the controller and length of memory mapped
 	region.
 - interrupts : interrupt number to the cpu.
+
+Optional properties:
+- timeout-sec : contains the watchdog timeout in seconds.
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index 8038b20284c..be37dde4f86 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -56,7 +56,7 @@
 
 /* User land timeout */
 #define WDT_HEARTBEAT 15
-static int heartbeat = WDT_HEARTBEAT;
+static int heartbeat;
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
 	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
@@ -176,6 +176,7 @@ static const struct watchdog_ops at91_wdt_ops = {
 static struct watchdog_device at91_wdt_dev = {
 	.info =		&at91_wdt_info,
 	.ops =		&at91_wdt_ops,
+	.timeout =	WDT_HEARTBEAT,
 	.min_timeout =	1,
 	.max_timeout =	0xFFFF,
 };
@@ -194,8 +195,8 @@ static int __init at91wdt_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	at91_wdt_dev.timeout = heartbeat;
 	at91_wdt_dev.parent = &pdev->dev;
+	watchdog_init_timeout(&at91_wdt_dev, heartbeat, &pdev->dev);
 	watchdog_set_nowayout(&at91_wdt_dev, nowayout);
 
 	/* Set watchdog */
@@ -212,7 +213,7 @@ static int __init at91wdt_probe(struct platform_device *pdev)
 	mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
 
 	pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n",
-		heartbeat, nowayout);
+		at91_wdt_dev.timeout, nowayout);
 
 	return 0;
 }
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 87ed2b9886a..da577980d39 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -140,6 +140,7 @@ static const struct watchdog_ops orion_wdt_ops = {
 static struct watchdog_device orion_wdt = {
 	.info = &orion_wdt_info,
 	.ops = &orion_wdt_ops,
+	.min_timeout = 1,
 };
 
 static int orion_wdt_probe(struct platform_device *pdev)
@@ -164,12 +165,9 @@ static int orion_wdt_probe(struct platform_device *pdev)
 
 	wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
 
-	if ((heartbeat < 1) || (heartbeat > wdt_max_duration))
-		heartbeat = wdt_max_duration;
-
-	orion_wdt.timeout = heartbeat;
-	orion_wdt.min_timeout = 1;
+	orion_wdt.timeout = wdt_max_duration;
 	orion_wdt.max_timeout = wdt_max_duration;
+	watchdog_init_timeout(&orion_wdt, heartbeat, &pdev->dev);
 
 	watchdog_set_nowayout(&orion_wdt, nowayout);
 	ret = watchdog_register_device(&orion_wdt);
@@ -179,7 +177,7 @@ static int orion_wdt_probe(struct platform_device *pdev)
 	}
 
 	pr_info("Initial timeout %d sec%s\n",
-		heartbeat, nowayout ? ", nowayout" : "");
+		orion_wdt.timeout, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index de1f3fa1d78..a3684a30eb6 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -142,6 +142,7 @@ static const struct watchdog_ops pnx4008_wdt_ops = {
 static struct watchdog_device pnx4008_wdd = {
 	.info = &pnx4008_wdt_ident,
 	.ops = &pnx4008_wdt_ops,
+	.timeout = DEFAULT_HEARTBEAT,
 	.min_timeout = 1,
 	.max_timeout = MAX_HEARTBEAT,
 };
@@ -151,8 +152,7 @@ static int pnx4008_wdt_probe(struct platform_device *pdev)
 	struct resource *r;
 	int ret = 0;
 
-	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
-		heartbeat = DEFAULT_HEARTBEAT;
+	watchdog_init_timeout(&pnx4008_wdd, heartbeat, &pdev->dev);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	wdt_base = devm_ioremap_resource(&pdev->dev, r);
@@ -167,7 +167,6 @@ static int pnx4008_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		goto out;
 
-	pnx4008_wdd.timeout = heartbeat;
 	pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
 			WDIOF_CARDRESET : 0;
 	watchdog_set_nowayout(&pnx4008_wdd, nowayout);
@@ -181,7 +180,7 @@ static int pnx4008_wdt_probe(struct platform_device *pdev)
 	}
 
 	dev_info(&pdev->dev, "PNX4008 Watchdog Timer: heartbeat %d sec\n",
-			heartbeat);
+		 pnx4008_wdd.timeout);
 
 	return 0;
 
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 6419c61594f..c1a221cbeae 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -53,7 +53,7 @@
 #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME	(15)
 
 static bool nowayout	= WATCHDOG_NOWAYOUT;
-static int tmr_margin	= CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
+static int tmr_margin;
 static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
 static int soft_noboot;
 static int debug;
@@ -226,6 +226,7 @@ static struct watchdog_ops s3c2410wdt_ops = {
 static struct watchdog_device s3c2410_wdd = {
 	.info = &s3c2410_wdt_ident,
 	.ops = &s3c2410wdt_ops,
+	.timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME,
 };
 
 /* interrupt handler code */
@@ -356,7 +357,8 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	/* see if we can actually set the requested timer margin, and if
 	 * not, try the default value */
 
-	if (s3c2410wdt_set_heartbeat(&s3c2410_wdd, tmr_margin)) {
+	watchdog_init_timeout(&s3c2410_wdd, tmr_margin,  &pdev->dev);
+	if (s3c2410wdt_set_heartbeat(&s3c2410_wdd, s3c2410_wdd.timeout)) {
 		started = s3c2410wdt_set_heartbeat(&s3c2410_wdd,
 					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);