Merge tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Some fixes for v3.8.  They include a fix for the new SR-IOV sysfs
  management support, an expanded quirk for Ricoh SD card readers, a
  Stratus DMI quirk fix, and a PME polling fix."

* tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz
  PCI/PM: Do not suspend port if any subordinate device needs PME polling
  PCI: Add PCIe Link Capability link speed and width names
  PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)
  PCI: Remove spurious error for sriov_numvfs store and simplify flow

6 files changed, 63 insertions, 55 deletions

diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 1b1dda90a94..412e1286d1f 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -434,7 +434,8 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
 		.callback = set_scan_all,
 		.ident = "Stratus/NEC ftServer",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ftServer"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
 		},
 	},
 	{}
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 05b78b16d20..9c6e9bb674e 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -422,77 +422,60 @@ static ssize_t sriov_numvfs_show(struct device *dev,
 }
 
 /*
- * num_vfs > 0; number of vfs to enable
- * num_vfs = 0; disable all vfs
+ * num_vfs > 0; number of VFs to enable
+ * num_vfs = 0; disable all VFs
  *
  * Note: SRIOV spec doesn't allow partial VF
- *       disable, so its all or none.
+ *       disable, so it's all or none.
  */
 static ssize_t sriov_numvfs_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	int num_vfs_enabled = 0;
-	int num_vfs;
-	int ret = 0;
-	u16 total;
+	int ret;
+	u16 num_vfs;
 
-	if (kstrtoint(buf, 0, &num_vfs) < 0)
-		return -EINVAL;
+	ret = kstrtou16(buf, 0, &num_vfs);
+	if (ret < 0)
+		return ret;
+
+	if (num_vfs > pci_sriov_get_totalvfs(pdev))
+		return -ERANGE;
+
+	if (num_vfs == pdev->sriov->num_VFs)
+		return count;		/* no change */
 
 	/* is PF driver loaded w/callback */
 	if (!pdev->driver || !pdev->driver->sriov_configure) {
-		dev_info(&pdev->dev,
-			 "Driver doesn't support SRIOV configuration via sysfs\n");
+		dev_info(&pdev->dev, "Driver doesn't support SRIOV configuration via sysfs\n");
 		return -ENOSYS;
 	}
 
-	/* if enabling vf's ... */
-	total = pci_sriov_get_totalvfs(pdev);
-	/* Requested VFs to enable < totalvfs and none enabled already */
-	if ((num_vfs > 0) && (num_vfs <= total)) {
-		if (pdev->sriov->num_VFs == 0) {
-			num_vfs_enabled =
-				pdev->driver->sriov_configure(pdev, num_vfs);
-			if ((num_vfs_enabled >= 0) &&
-			    (num_vfs_enabled != num_vfs)) {
-				dev_warn(&pdev->dev,
-					 "Only %d VFs enabled\n",
-					 num_vfs_enabled);
-				return count;
-			} else if (num_vfs_enabled < 0)
-				/* error code from driver callback */
-				return num_vfs_enabled;
-		} else if (num_vfs == pdev->sriov->num_VFs) {
-			dev_warn(&pdev->dev,
-				 "%d VFs already enabled; no enable action taken\n",
-				 num_vfs);
-			return count;
-		} else {
-			dev_warn(&pdev->dev,
-				 "%d VFs already enabled. Disable before enabling %d VFs\n",
-				 pdev->sriov->num_VFs, num_vfs);
-			return -EINVAL;
-		}
+	if (num_vfs == 0) {
+		/* disable VFs */
+		ret = pdev->driver->sriov_configure(pdev, 0);
+		if (ret < 0)
+			return ret;
+		return count;
 	}
 
-	/* disable vfs */
-	if (num_vfs == 0) {
-		if (pdev->sriov->num_VFs != 0) {
-			ret = pdev->driver->sriov_configure(pdev, 0);
-			return ret ? ret : count;
-		} else {
-			dev_warn(&pdev->dev,
-				 "All VFs disabled; no disable action taken\n");
-			return count;
-		}
+	/* enable VFs */
+	if (pdev->sriov->num_VFs) {
+		dev_warn(&pdev->dev, "%d VFs already enabled. Disable before enabling %d VFs\n",
+			 pdev->sriov->num_VFs, num_vfs);
+		return -EBUSY;
 	}
 
-	dev_err(&pdev->dev,
-		"Invalid value for number of VFs to enable: %d\n", num_vfs);
+	ret = pdev->driver->sriov_configure(pdev, num_vfs);
+	if (ret < 0)
+		return ret;
 
-	return -EINVAL;
+	if (ret != num_vfs)
+		dev_warn(&pdev->dev, "%d VFs requested; only %d enabled\n",
+			 num_vfs, ret);
+
+	return count;
 }
 
 static struct device_attribute sriov_totalvfs_attr = __ATTR_RO(sriov_totalvfs);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index d4824cb78b4..08c243ab034 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -134,10 +134,28 @@ static int pcie_port_runtime_resume(struct device *dev)
 	return 0;
 }
 
+static int pci_dev_pme_poll(struct pci_dev *pdev, void *data)
+{
+	bool *pme_poll = data;
+
+	if (pdev->pme_poll)
+		*pme_poll = true;
+	return 0;
+}
+
 static int pcie_port_runtime_idle(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
+	bool pme_poll = false;
+
+	/*
+	 * If any subordinate device needs pme poll, we should keep
+	 * the port in D0, because we need port in D0 to poll it.
+	 */
+	pci_walk_bus(pdev->subordinate, pci_dev_pme_poll, &pme_poll);
 	/* Delay for a short while to prevent too frequent suspend/resume */
-	pm_schedule_suspend(dev, 10);
+	if (!pme_poll)
+		pm_schedule_suspend(dev, 10);
 	return -EBUSY;
 }
 #else
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 8f7a6344e79..0369fb6fc1d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2725,7 +2725,7 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 	if (PCI_FUNC(dev->devfn))
 		return;
 	/*
-	 * RICOH 0xe823 SD/MMC card reader fails to recognize
+	 * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize
 	 * certain types of SD/MMC cards. Lowering the SD base
 	 * clock frequency from 200Mhz to 50Mhz fixes this issue.
 	 *
@@ -2736,7 +2736,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 	 * 0xf9  - Key register for 0x150
 	 * 0xfc  - key register for 0xe1
 	 */
-	if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
+	if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 ||
+	    dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
 		pci_write_config_byte(dev, 0xf9, 0xfc);
 		pci_write_config_byte(dev, 0x150, 0x10);
 		pci_write_config_byte(dev, 0xf9, 0x00);
@@ -2763,6 +2764,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
 #endif /*CONFIG_MMC_RICOH_MMC*/
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 0f8447376dd..0eb65796bcb 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1568,6 +1568,7 @@
 #define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
 #define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
 #define PCI_DEVICE_ID_RICOH_R5C822	0x0822
+#define PCI_DEVICE_ID_RICOH_R5CE822	0xe822
 #define PCI_DEVICE_ID_RICOH_R5CE823	0xe823
 #define PCI_DEVICE_ID_RICOH_R5C832	0x0832
 #define PCI_DEVICE_ID_RICOH_R5C843	0x0843
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 6b7b6f1e2fd..ebfadc56d1b 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -458,6 +458,8 @@
 #define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
 #define PCI_EXP_LNKCAP		12	/* Link Capabilities */
 #define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
+#define  PCI_EXP_LNKCAP_SLS_2_5GB 0x1	/* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */
+#define  PCI_EXP_LNKCAP_SLS_5_0GB 0x2	/* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */
 #define  PCI_EXP_LNKCAP_MLW	0x000003f0 /* Maximum Link Width */
 #define  PCI_EXP_LNKCAP_ASPMS	0x00000c00 /* ASPM Support */
 #define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */