Merge tag 'nomadik-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

From Linus Walleij:

Nomadik DT and clock work:
- Lee Jones' pinctrl compat ontology patches
- A real clock driver for the Nomadik, 100% DT-based
- Device tree changes for the Nomadik clocks

* tag 'nomadik-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  pinctrl/nomadik: Standardise Pinctrl compat string for Nomadik based platforms
  ARM: nomadik: Standardise Nomadik STN8815 based Pinctrl compat string in the DTS

Conflicts:
	arch/arm/boot/dts/ste-nomadik-s8815.dts

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 1124 insertions, 42 deletions

diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt
new file mode 100644
index 00000000000..7fc09773de4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt
@@ -0,0 +1,104 @@
+ST Microelectronics Nomadik SRC System Reset and Control
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The Nomadik SRC controller is responsible of controlling chrystals,
+PLLs and clock gates.
+
+Required properties for the SRC node:
+- compatible: must be "stericsson,nomadik-src"
+- reg: must contain the SRC register base and size
+
+Optional properties for the SRC node:
+- disable-sxtalo: if present this will disable the SXTALO
+  i.e. the driver output for the slow 32kHz chrystal, if the
+  board has its own circuitry for providing this oscillator
+- disable-mxtal: if present this will disable the MXTALO,
+  i.e. the driver output for the main (~19.2 MHz) chrystal,
+  if the board has its own circuitry for providing this
+  osciallator
+
+
+PLL nodes: these nodes represent the two PLLs on the system,
+which should both have the main chrystal, represented as a
+fixed frequency clock, as parent.
+
+Required properties for the two PLL nodes:
+- compatible: must be "st,nomadik-pll-clock"
+- clock-cells: must be 0
+- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively
+- clocks: this clock will have main chrystal as parent
+
+
+HCLK nodes: these represent the clock gates on individual
+lines from the HCLK clock tree and the gate for individual
+lines from the PCLK clock tree.
+
+Requires properties for the HCLK nodes:
+- compatible: must be "st,nomadik-hclk-clock"
+- clock-cells: must be 0
+- clock-id: must be the clock ID from 0 to 63 according to
+  this table:
+
+	0:  HCLKDMA0
+	1:  HCLKSMC
+	2:  HCLKSDRAM
+	3:  HCLKDMA1
+	4:  HCLKCLCD
+	5:  PCLKIRDA
+	6:  PCLKSSP
+	7:  PCLKUART0
+	8:  PCLKSDI
+	9:  PCLKI2C0
+	10: PCLKI2C1
+	11: PCLKUART1
+	12: PCLMSP0
+	13: HCLKUSB
+	14: HCLKDIF
+	15: HCLKSAA
+	16: HCLKSVA
+	17: PCLKHSI
+	18: PCLKXTI
+	19: PCLKUART2
+	20: PCLKMSP1
+	21: PCLKMSP2
+	22: PCLKOWM
+	23: HCLKHPI
+	24: PCLKSKE
+	25: PCLKHSEM
+	26: HCLK3D
+	27: HCLKHASH
+	28: HCLKCRYP
+	29: PCLKMSHC
+	30: HCLKUSBM
+	31: HCLKRNG
+	(32, 33, 34, 35 RESERVED)
+	36: CLDCLK
+	37: IRDACLK
+	38: SSPICLK
+	39: UART0CLK
+	40: SDICLK
+	41: I2C0CLK
+	42: I2C1CLK
+	43: UART1CLK
+	44: MSPCLK0
+	45: USBCLK
+	46: DIFCLK
+	47: IPI2CCLK
+	48: IPBMCCLK
+	49: HSICLKRX
+	50: HSICLKTX
+	51: UART2CLK
+	52: MSPCLK1
+	53: MSPCLK2
+	54: OWMCLK
+	(55 RESERVED)
+	56: SKECLK
+	(57 RESERVED)
+	58: 3DCLK
+	59: PCLKMSP3
+	60: MSPCLK3
+	61: MSHCCLK
+	62: USBMCLK
+	63: RNGCCLK
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index f4dfda7db36..16c3888b7b1 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -22,6 +22,12 @@
 		};
 	};
 
+	src@101e0000 {
+		/* These chrystal drivers are not used on this board */
+		disable-sxtalo;
+		disable-mxtalo;
+	};
+
 	pinctrl {
 		/* Hog CD pins */
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 615da8798a0..a3acfa7b3dc 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -93,7 +93,7 @@
 	};
 
 	pinctrl {
-		compatible = "stericsson,nmk-pinctrl-stn8815";
+		compatible = "stericsson,stn8815-pinctrl";
 		/* Pin configurations */
 		uart0 {
 			uart0_default_mux: uart0_mux {
@@ -168,37 +168,464 @@
 	src: src@101e0000 {
 		compatible = "stericsson,nomadik-src";
 		reg = <0x101e0000 0x1000>;
-		clocks {
-			/*
-			 * Dummy clock for primecells
-			 */
-			pclk: pclk@0 {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <0>;
-			};
-			/*
-			 * The 2.4 MHz TIMCLK reference clock is active at
-			 * boot time, this is actually the MXTALCLK @19.2 MHz
-			 * divided by 8. This clock is used by the timers and
-			 * watchdog. See page 105 ff.
-			 */
-			timclk: timclk@2.4M {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <2400000>;
-			};
-			/*
-			 * At boot time, PLL2 is set to generate a set of
-			 * fixed clocks, one of them is CLK48, the 48 MHz
-			 * clock, routed to the UART, MMC/SD, I2C, IrDA,
-			 * USB and SSP blocks.
-			 */
-			clk48: clk48@48M {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <48000000>;
-			};
+		disable-sxtalo;
+		disable-mxtalo;
+
+		/*
+		 * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
+		 * that is parent of TIMCLK, PLL1 and PLL2
+		 */
+		mxtal: mxtal@19.2M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+		};
+
+		/*
+		 * The 2.4 MHz TIMCLK reference clock is active at
+		 * boot time, this is actually the MXTALCLK @19.2 MHz
+		 * divided by 8. This clock is used by the timers and
+		 * watchdog. See page 105 ff.
+		 */
+		timclk: timclk@2.4M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&mxtal>;
+		};
+
+		/* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
+		pll1: pll1@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-pll-clock";
+			pll-id = <1>;
+			clocks = <&mxtal>;
+		};
+
+		/* HCLK divides the PLL1 with 1,2,3 or 4 */
+		hclk: hclk@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-hclk-clock";
+			clocks = <&pll1>;
+		};
+		/* The PCLK domain uses HCLK right off */
+		pclk: pclk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&hclk>;
+		};
+
+		/* PLL2 is usually 864 MHz and divided into a few fixed rates */
+		pll2: pll2@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-pll-clock";
+			pll-id = <2>;
+			clocks = <&mxtal>;
+		};
+		clk216: clk216@216M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk108: clk108@108M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&clk216>;
+		};
+		clk72: clk72@72M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			/* The data sheet does not say how this is derived */
+			clock-div = <12>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk48: clk48@48M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			/* The data sheet does not say how this is derived */
+			clock-div = <18>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk27: clk27@27M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&clk108>;
+		};
+
+		/* This apparently exists as well */
+		ulpiclk: ulpiclk@60M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <60000000>;
+		};
+
+		/*
+		 * IP AMBA bus clocks, driving the bus side of the
+		 * peripheral clocking, clock gates.
+		 */
+
+		hclkdma0: hclkdma0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <0>;
+			clocks = <&hclk>;
+		};
+		hclksmc: hclksmc@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <1>;
+			clocks = <&hclk>;
+		};
+		hclksdram: hclksdram@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <2>;
+			clocks = <&hclk>;
+		};
+		hclkdma1: hclkdma1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <3>;
+			clocks = <&hclk>;
+		};
+		hclkclcd: hclkclcd@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <4>;
+			clocks = <&hclk>;
+		};
+		pclkirda: pclkirda@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <5>;
+			clocks = <&pclk>;
+		};
+		pclkssp: pclkssp@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <6>;
+			clocks = <&pclk>;
+		};
+		pclkuart0: pclkuart0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <7>;
+			clocks = <&pclk>;
+		};
+		pclksdi: pclksdi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <8>;
+			clocks = <&pclk>;
+		};
+		pclki2c0: pclki2c0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <9>;
+			clocks = <&pclk>;
+		};
+		pclki2c1: pclki2c1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <10>;
+			clocks = <&pclk>;
+		};
+		pclkuart1: pclkuart1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <11>;
+			clocks = <&pclk>;
+		};
+		pclkmsp0: pclkmsp0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <12>;
+			clocks = <&pclk>;
+		};
+		hclkusb: hclkusb@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <13>;
+			clocks = <&hclk>;
+		};
+		hclkdif: hclkdif@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <14>;
+			clocks = <&hclk>;
+		};
+		hclksaa: hclksaa@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <15>;
+			clocks = <&hclk>;
+		};
+		hclksva: hclksva@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <16>;
+			clocks = <&hclk>;
+		};
+		pclkhsi: pclkhsi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <17>;
+			clocks = <&pclk>;
+		};
+		pclkxti: pclkxti@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <18>;
+			clocks = <&pclk>;
+		};
+		pclkuart2: pclkuart2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <19>;
+			clocks = <&pclk>;
+		};
+		pclkmsp1: pclkmsp1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <20>;
+			clocks = <&pclk>;
+		};
+		pclkmsp2: pclkmsp2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <21>;
+			clocks = <&pclk>;
+		};
+		pclkowm: pclkowm@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <22>;
+			clocks = <&pclk>;
+		};
+		hclkhpi: hclkhpi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <23>;
+			clocks = <&hclk>;
+		};
+		pclkske: pclkske@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <24>;
+			clocks = <&pclk>;
+		};
+		pclkhsem: pclkhsem@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <25>;
+			clocks = <&pclk>;
+		};
+		hclk3d: hclk3d@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <26>;
+			clocks = <&hclk>;
+		};
+		hclkhash: hclkhash@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <27>;
+			clocks = <&hclk>;
+		};
+		hclkcryp: hclkcryp@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <28>;
+			clocks = <&hclk>;
+		};
+		pclkmshc: pclkmshc@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <29>;
+			clocks = <&pclk>;
+		};
+		hclkusbm: hclkusbm@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <30>;
+			clocks = <&hclk>;
+		};
+		hclkrng: hclkrng@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <31>;
+			clocks = <&hclk>;
+		};
+
+		/* IP kernel clocks */
+		clcdclk: clcdclk@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <36>;
+			clocks = <&clk72 &clk48>;
+		};
+		irdaclk: irdaclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <37>;
+			clocks = <&clk48>;
+		};
+		sspiclk: sspiclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <38>;
+			clocks = <&clk48>;
+		};
+		uart0clk: uart0clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <39>;
+			clocks = <&clk48>;
+		};
+		sdiclk: sdiclk@48M {
+			/* Also called MCCLK in some documents */
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <40>;
+			clocks = <&clk48>;
+		};
+		i2c0clk: i2c0clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <41>;
+			clocks = <&clk48>;
+		};
+		i2c1clk: i2c1clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <42>;
+			clocks = <&clk48>;
+		};
+		uart1clk: uart1clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <43>;
+			clocks = <&clk48>;
+		};
+		mspclk0: mspclk0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <44>;
+			clocks = <&clk48>;
+		};
+		usbclk: usbclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <45>;
+			clocks = <&clk48>; /* 48 MHz not ULPI */
+		};
+		difclk: difclk@72M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <46>;
+			clocks = <&clk72>;
+		};
+		ipi2cclk: ipi2cclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <47>;
+			clocks = <&clk48>; /* Guess */
+		};
+		ipbmcclk: ipbmcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <48>;
+			clocks = <&clk48>; /* Guess */
+		};
+		hsiclkrx: hsiclkrx@216M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <49>;
+			clocks = <&clk216>;
+		};
+		hsiclktx: hsiclktx@108M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <50>;
+			clocks = <&clk108>;
+		};
+		uart2clk: uart2clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <51>;
+			clocks = <&clk48>;
+		};
+		mspclk1: mspclk1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <52>;
+			clocks = <&clk48>;
+		};
+		mspclk2: mspclk2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <53>;
+			clocks = <&clk48>;
+		};
+		owmclk: owmclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <54>;
+			clocks = <&clk48>; /* Guess */
+		};
+		skeclk: skeclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <56>;
+			clocks = <&clk48>; /* Guess */
+		};
+		x3dclk: x3dclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <58>;
+			clocks = <&clk48>; /* Guess */
+		};
+		pclkmsp3: pclkmsp3@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <59>;
+			clocks = <&pclk>;
+		};
+		mspclk3: mspclk3@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <60>;
+			clocks = <&clk48>;
+		};
+		mshcclk: mshcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <61>;
+			clocks = <&clk48>; /* Guess */
+		};
+		usbmclk: usbmclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <62>;
+			/* Stated as "48 MHz not ULPI clock" */
+			clocks = <&clk48>;
+		};
+		rngcclk: rngcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <63>;
+			clocks = <&clk48>; /* Guess */
 		};
 	};
 
@@ -212,7 +639,7 @@
 			<0x41000000 0x2000>,	/* NAND Base ADDR */
 			<0x40800000 0x2000>;	/* NAND Base CMD */
 		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-		clocks = <&pclk>;
+		clocks = <&hclksmc>;
 		status = "okay";
 
 		partition@0 {
@@ -334,7 +761,7 @@
 			reg = <0x101fd000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <12>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&uart0clk>, <&pclkuart0>;
 			clock-names = "uartclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_default_mux>;
@@ -345,7 +772,7 @@
 			reg = <0x101fb000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <17>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&uart1clk>, <&pclkuart1>;
 			clock-names = "uartclk", "apb_pclk";
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart1_default_mux>;
@@ -356,7 +783,7 @@
 			reg = <0x101f2000 0x1000>;
 			interrupt-parent = <&vica>;
 			interrupts = <28>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&uart2clk>, <&pclkuart2>;
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
@@ -364,7 +791,7 @@
 		rng: rng@101b0000 {
 			compatible = "arm,primecell";
 			reg = <0x101b0000 0x1000>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&rngcclk>, <&hclkrng>;
 			clock-names = "rng", "apb_pclk";
 		};
 
@@ -380,7 +807,7 @@
 		mmcsd: sdi@101f6000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x101f6000 0x1000>;
-			clocks = <&clk48>, <&pclk>;
+			clocks = <&sdiclk>, <&pclksdi>;
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 4a1ab27ee87..6d819a37f64 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -1,21 +1,566 @@
+/*
+ * Nomadik clock implementation
+ * Copyright (C) 2013 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#define pr_fmt(fmt) "Nomadik SRC clocks: " fmt
+
+#include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk-provider.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/reboot.h>
 
 /*
  * The Nomadik clock tree is described in the STN8815A12 DB V4.2
  * reference manual for the chip, page 94 ff.
+ * Clock IDs are in the STn8815 Reference Manual table 3, page 27.
+ */
+
+#define SRC_CR			0x00U
+#define SRC_XTALCR		0x0CU
+#define SRC_XTALCR_XTALTIMEN	BIT(20)
+#define SRC_XTALCR_SXTALDIS	BIT(19)
+#define SRC_XTALCR_MXTALSTAT	BIT(2)
+#define SRC_XTALCR_MXTALEN	BIT(1)
+#define SRC_XTALCR_MXTALOVER	BIT(0)
+#define SRC_PLLCR		0x10U
+#define SRC_PLLCR_PLLTIMEN	BIT(29)
+#define SRC_PLLCR_PLL2EN	BIT(28)
+#define SRC_PLLCR_PLL1STAT	BIT(2)
+#define SRC_PLLCR_PLL1EN	BIT(1)
+#define SRC_PLLCR_PLL1OVER	BIT(0)
+#define SRC_PLLFR		0x14U
+#define SRC_PCKEN0		0x24U
+#define SRC_PCKDIS0		0x28U
+#define SRC_PCKENSR0		0x2CU
+#define SRC_PCKSR0		0x30U
+#define SRC_PCKEN1		0x34U
+#define SRC_PCKDIS1		0x38U
+#define SRC_PCKENSR1		0x3CU
+#define SRC_PCKSR1		0x40U
+
+/* Lock protecting the SRC_CR register */
+static DEFINE_SPINLOCK(src_lock);
+/* Base address of the SRC */
+static void __iomem *src_base;
+
+/**
+ * struct clk_pll1 - Nomadik PLL1 clock
+ * @hw: corresponding clock hardware entry
+ * @id: PLL instance: 1 or 2
+ */
+struct clk_pll {
+	struct clk_hw hw;
+	int id;
+};
+
+/**
+ * struct clk_src - Nomadik src clock
+ * @hw: corresponding clock hardware entry
+ * @id: the clock ID
+ * @group1: true if the clock is in group1, else it is in group0
+ * @clkbit: bit 0...31 corresponding to the clock in each clock register
+ */
+struct clk_src {
+	struct clk_hw hw;
+	int id;
+	bool group1;
+	u32 clkbit;
+};
+
+#define to_pll(_hw) container_of(_hw, struct clk_pll, hw)
+#define to_src(_hw) container_of(_hw, struct clk_src, hw)
+
+static int pll_clk_enable(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_pll(hw);
+	u32 val;
+
+	spin_lock(&src_lock);
+	val = readl(src_base + SRC_PLLCR);
+	if (pll->id == 1) {
+		if (val & SRC_PLLCR_PLL1OVER) {
+			val |= SRC_PLLCR_PLL1EN;
+			writel(val, src_base + SRC_PLLCR);
+		}
+	} else if (pll->id == 2) {
+		val |= SRC_PLLCR_PLL2EN;
+		writel(val, src_base + SRC_PLLCR);
+	}
+	spin_unlock(&src_lock);
+	return 0;
+}
+
+static void pll_clk_disable(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_pll(hw);
+	u32 val;
+
+	spin_lock(&src_lock);
+	val = readl(src_base + SRC_PLLCR);
+	if (pll->id == 1) {
+		if (val & SRC_PLLCR_PLL1OVER) {
+			val &= ~SRC_PLLCR_PLL1EN;
+			writel(val, src_base + SRC_PLLCR);
+		}
+	} else if (pll->id == 2) {
+		val &= ~SRC_PLLCR_PLL2EN;
+		writel(val, src_base + SRC_PLLCR);
+	}
+	spin_unlock(&src_lock);
+}
+
+static int pll_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_pll *pll = to_pll(hw);
+	u32 val;
+
+	val = readl(src_base + SRC_PLLCR);
+	if (pll->id == 1) {
+		if (val & SRC_PLLCR_PLL1OVER)
+			return !!(val & SRC_PLLCR_PLL1EN);
+	} else if (pll->id == 2) {
+		return !!(val & SRC_PLLCR_PLL2EN);
+	}
+	return 1;
+}
+
+static unsigned long pll_clk_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_pll(hw);
+	u32 val;
+
+	val = readl(src_base + SRC_PLLFR);
+
+	if (pll->id == 1) {
+		u8 mul;
+		u8 div;
+
+		mul = (val >> 8) & 0x3FU;
+		mul += 2;
+		div = val & 0x07U;
+		return (parent_rate * mul) >> div;
+	}
+
+	if (pll->id == 2) {
+		u8 mul;
+
+		mul = (val >> 24) & 0x3FU;
+		mul += 2;
+		return (parent_rate * mul);
+	}
+
+	/* Unknown PLL */
+	return 0;
+}
+
+
+static const struct clk_ops pll_clk_ops = {
+	.enable = pll_clk_enable,
+	.disable = pll_clk_disable,
+	.is_enabled = pll_clk_is_enabled,
+	.recalc_rate = pll_clk_recalc_rate,
+};
+
+static struct clk * __init
+pll_clk_register(struct device *dev, const char *name,
+		 const char *parent_name, u32 id)
+{
+	struct clk *clk;
+	struct clk_pll *pll;
+	struct clk_init_data init;
+
+	if (id != 1 && id != 2) {
+		pr_err("%s: the Nomadik has only PLL 1 & 2\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll) {
+		pr_err("%s: could not allocate PLL clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &pll_clk_ops;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	pll->hw.init = &init;
+	pll->id = id;
+
+	pr_debug("register PLL1 clock \"%s\"\n", name);
+
+	clk = clk_register(dev, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
+
+/*
+ * The Nomadik SRC clocks are gated, but not in the sense that
+ * you read-modify-write a register. Instead there are separate
+ * clock enable and clock disable registers. Writing a '1' bit in
+ * the enable register for a certain clock ungates that clock without
+ * affecting the other clocks. The disable register works the opposite
+ * way.
  */
 
-static const __initconst struct of_device_id cpu8815_clk_match[] = {
-	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+static int src_clk_enable(struct clk_hw *hw)
+{
+	struct clk_src *sclk = to_src(hw);
+	u32 enreg = sclk->group1 ? SRC_PCKEN1 : SRC_PCKEN0;
+	u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
+
+	writel(sclk->clkbit, src_base + enreg);
+	/* spin until enabled */
+	while (!(readl(src_base + sreg) & sclk->clkbit))
+		cpu_relax();
+	return 0;
+}
+
+static void src_clk_disable(struct clk_hw *hw)
+{
+	struct clk_src *sclk = to_src(hw);
+	u32 disreg = sclk->group1 ? SRC_PCKDIS1 : SRC_PCKDIS0;
+	u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
+
+	writel(sclk->clkbit, src_base + disreg);
+	/* spin until disabled */
+	while (readl(src_base + sreg) & sclk->clkbit)
+		cpu_relax();
+}
+
+static int src_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_src *sclk = to_src(hw);
+	u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
+	u32 val = readl(src_base + sreg);
+
+	return !!(val & sclk->clkbit);
+}
+
+static unsigned long
+src_clk_recalc_rate(struct clk_hw *hw,
+		    unsigned long parent_rate)
+{
+	return parent_rate;
+}
+
+static const struct clk_ops src_clk_ops = {
+	.enable = src_clk_enable,
+	.disable = src_clk_disable,
+	.is_enabled = src_clk_is_enabled,
+	.recalc_rate = src_clk_recalc_rate,
+};
+
+static struct clk * __init
+src_clk_register(struct device *dev, const char *name,
+		 const char *parent_name, u8 id)
+{
+	struct clk *clk;
+	struct clk_src *sclk;
+	struct clk_init_data init;
+
+	sclk = kzalloc(sizeof(*sclk), GFP_KERNEL);
+	if (!sclk) {
+		pr_err("could not allocate SRC clock %s\n",
+			name);
+		return ERR_PTR(-ENOMEM);
+	}
+	init.name = name;
+	init.ops = &src_clk_ops;
+	/* Do not force-disable the static SDRAM controller */
+	if (id == 2)
+		init.flags = CLK_IGNORE_UNUSED;
+	else
+		init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	sclk->hw.init = &init;
+	sclk->id = id;
+	sclk->group1 = (id > 31);
+	sclk->clkbit = BIT(id & 0x1f);
+
+	pr_debug("register clock \"%s\" ID: %d group: %d bits: %08x\n",
+		 name, id, sclk->group1, sclk->clkbit);
+
+	clk = clk_register(dev, &sclk->hw);
+	if (IS_ERR(clk))
+		kfree(sclk);
+
+	return clk;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static u32 src_pcksr0_boot;
+static u32 src_pcksr1_boot;
+
+static const char * const src_clk_names[] = {
+	"HCLKDMA0  ",
+	"HCLKSMC   ",
+	"HCLKSDRAM ",
+	"HCLKDMA1  ",
+	"HCLKCLCD  ",
+	"PCLKIRDA  ",
+	"PCLKSSP   ",
+	"PCLKUART0 ",
+	"PCLKSDI   ",
+	"PCLKI2C0  ",
+	"PCLKI2C1  ",
+	"PCLKUART1 ",
+	"PCLMSP0   ",
+	"HCLKUSB   ",
+	"HCLKDIF   ",
+	"HCLKSAA   ",
+	"HCLKSVA   ",
+	"PCLKHSI   ",
+	"PCLKXTI   ",
+	"PCLKUART2 ",
+	"PCLKMSP1  ",
+	"PCLKMSP2  ",
+	"PCLKOWM   ",
+	"HCLKHPI   ",
+	"PCLKSKE   ",
+	"PCLKHSEM  ",
+	"HCLK3D    ",
+	"HCLKHASH  ",
+	"HCLKCRYP  ",
+	"PCLKMSHC  ",
+	"HCLKUSBM  ",
+	"HCLKRNG   ",
+	"RESERVED  ",
+	"RESERVED  ",
+	"RESERVED  ",
+	"RESERVED  ",
+	"CLDCLK    ",
+	"IRDACLK   ",
+	"SSPICLK   ",
+	"UART0CLK  ",
+	"SDICLK    ",
+	"I2C0CLK   ",
+	"I2C1CLK   ",
+	"UART1CLK  ",
+	"MSPCLK0   ",
+	"USBCLK    ",
+	"DIFCLK    ",
+	"IPI2CCLK  ",
+	"IPBMCCLK  ",
+	"HSICLKRX  ",
+	"HSICLKTX  ",
+	"UART2CLK  ",
+	"MSPCLK1   ",
+	"MSPCLK2   ",
+	"OWMCLK    ",
+	"RESERVED  ",
+	"SKECLK    ",
+	"RESERVED  ",
+	"3DCLK     ",
+	"PCLKMSP3  ",
+	"MSPCLK3   ",
+	"MSHCCLK   ",
+	"USBMCLK   ",
+	"RNGCCLK   ",
+};
+
+static int nomadik_src_clk_show(struct seq_file *s, void *what)
+{
+	int i;
+	u32 src_pcksr0 = readl(src_base + SRC_PCKSR0);
+	u32 src_pcksr1 = readl(src_base + SRC_PCKSR1);
+	u32 src_pckensr0 = readl(src_base + SRC_PCKENSR0);
+	u32 src_pckensr1 = readl(src_base + SRC_PCKENSR1);
+
+	seq_printf(s, "Clock:      Boot:   Now:    Request: ASKED:\n");
+	for (i = 0; i < ARRAY_SIZE(src_clk_names); i++) {
+		u32 pcksrb = (i < 0x20) ? src_pcksr0_boot : src_pcksr1_boot;
+		u32 pcksr = (i < 0x20) ? src_pcksr0 : src_pcksr1;
+		u32 pckreq = (i < 0x20) ? src_pckensr0 : src_pckensr1;
+		u32 mask = BIT(i & 0x1f);
+
+		seq_printf(s, "%s  %s     %s     %s\n",
+			   src_clk_names[i],
+			   (pcksrb & mask) ? "on " : "off",
+			   (pcksr & mask) ? "on " : "off",
+			   (pckreq & mask) ? "on " : "off");
+	}
+	return 0;
+}
+
+static int nomadik_src_clk_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, nomadik_src_clk_show, NULL);
+}
+
+static const struct file_operations nomadik_src_clk_debugfs_ops = {
+	.open           = nomadik_src_clk_open,
+	.read           = seq_read,
+        .llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static int __init nomadik_src_clk_init_debugfs(void)
+{
+	src_pcksr0_boot = readl(src_base + SRC_PCKSR0);
+	src_pcksr1_boot = readl(src_base + SRC_PCKSR1);
+	debugfs_create_file("nomadik-src-clk", S_IFREG | S_IRUGO,
+			    NULL, NULL, &nomadik_src_clk_debugfs_ops);
+	return 0;
+}
+
+module_init(nomadik_src_clk_init_debugfs);
+
+#endif
+
+static void __init of_nomadik_pll_setup(struct device_node *np)
+{
+	struct clk *clk = ERR_PTR(-EINVAL);
+	const char *clk_name = np->name;
+	const char *parent_name;
+	u32 pll_id;
+
+	if (of_property_read_u32(np, "pll-id", &pll_id)) {
+		pr_err("%s: PLL \"%s\" missing pll-id property\n",
+			__func__, clk_name);
+		return;
+	}
+	parent_name = of_clk_get_parent_name(np, 0);
+	clk = pll_clk_register(NULL, clk_name, parent_name, pll_id);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static void __init of_nomadik_hclk_setup(struct device_node *np)
+{
+	struct clk *clk = ERR_PTR(-EINVAL);
+	const char *clk_name = np->name;
+	const char *parent_name;
+
+	parent_name = of_clk_get_parent_name(np, 0);
+	/*
+	 * The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4.
+	 */
+	clk = clk_register_divider(NULL, clk_name, parent_name,
+			   0, src_base + SRC_CR,
+			   13, 2,
+			   CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+			   &src_lock);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static void __init of_nomadik_src_clk_setup(struct device_node *np)
+{
+	struct clk *clk = ERR_PTR(-EINVAL);
+	const char *clk_name = np->name;
+	const char *parent_name;
+	u32 clk_id;
+
+	if (of_property_read_u32(np, "clock-id", &clk_id)) {
+		pr_err("%s: SRC clock \"%s\" missing clock-id property\n",
+			__func__, clk_name);
+		return;
+	}
+	parent_name = of_clk_get_parent_name(np, 0);
+	clk = src_clk_register(NULL, clk_name, parent_name, clk_id);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static const __initconst struct of_device_id nomadik_src_match[] = {
+	{ .compatible = "stericsson,nomadik-src" },
 	{ /* sentinel */ }
 };
 
+static const __initconst struct of_device_id nomadik_src_clk_match[] = {
+	{
+		.compatible = "fixed-clock",
+		.data = of_fixed_clk_setup,
+	},
+	{
+		.compatible = "fixed-factor-clock",
+		.data = of_fixed_factor_clk_setup,
+	},
+	{
+		.compatible = "st,nomadik-pll-clock",
+		.data = of_nomadik_pll_setup,
+	},
+	{
+		.compatible = "st,nomadik-hclk-clock",
+		.data = of_nomadik_hclk_setup,
+	},
+	{
+		.compatible = "st,nomadik-src-clock",
+		.data = of_nomadik_src_clk_setup,
+	},
+	{ /* sentinel */ }
+};
+
+static int nomadik_clk_reboot_handler(struct notifier_block *this,
+				unsigned long code,
+				void *unused)
+{
+	u32 val;
+
+	/* The main chrystal need to be enabled for reboot to work */
+	val = readl(src_base + SRC_XTALCR);
+	val &= ~SRC_XTALCR_MXTALOVER;
+	val |= SRC_XTALCR_MXTALEN;
+	pr_crit("force-enabling MXTALO\n");
+	writel(val, src_base + SRC_XTALCR);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block nomadik_clk_reboot_notifier = {
+	.notifier_call = nomadik_clk_reboot_handler,
+};
+
 void __init nomadik_clk_init(void)
 {
-	of_clk_init(cpu8815_clk_match);
+	struct device_node *np;
+	u32 val;
+
+	np = of_find_matching_node(NULL, nomadik_src_match);
+	if (!np) {
+		pr_crit("no matching node for SRC, aborting clock init\n");
+		return;
+	}
+	src_base = of_iomap(np, 0);
+	if (!src_base) {
+		pr_err("%s: must have src parent node with REGS (%s)\n",
+		       __func__, np->name);
+		return;
+	}
+	val = readl(src_base + SRC_XTALCR);
+	pr_info("SXTALO is %s\n",
+		(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
+	pr_info("MXTAL is %s\n",
+		(val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
+	if (of_property_read_bool(np, "disable-sxtalo")) {
+		/* The machine uses an external oscillator circuit */
+		val |= SRC_XTALCR_SXTALDIS;
+		pr_info("disabling SXTALO\n");
+	}
+	if (of_property_read_bool(np, "disable-mxtalo")) {
+		/* Disable this too: also run by external oscillator */
+		val |= SRC_XTALCR_MXTALOVER;
+		val &= ~SRC_XTALCR_MXTALEN;
+		pr_info("disabling MXTALO\n");
+	}
+	writel(val, src_base + SRC_XTALCR);
+	register_reboot_notifier(&nomadik_clk_reboot_notifier);
+
+	of_clk_init(nomadik_src_clk_match);
 }
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 7c44f1a57e7..8a4f9c5c0b8 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -2104,7 +2104,7 @@ static struct pinctrl_desc nmk_pinctrl_desc = {
 
 static const struct of_device_id nmk_pinctrl_match[] = {
 	{
-		.compatible = "stericsson,nmk-pinctrl-stn8815",
+		.compatible = "stericsson,stn8815-pinctrl",
 		.data = (void *)PINCTRL_NMK_STN8815,
 	},
 	{