Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] s5pv210: make needlessly global symbols static
  [CPUFREQ] exynos4210: make needlessly global symbols static
  [CPUFREQ] S3C6410: Add some lower frequencies for 800MHz base clock operation
  [CPUFREQ] S5PV210: Add reboot notifier to prevent system hang
  [CPUFREQ] S5PV210: Adjust udelay prior to voltage scaling down
  [CPUFREQ] S5PV210: Lock a mutex while changing the cpu frequency
  [CPUFREQ] S5PV210: Add pm_notifier to prevent system unstable
  [CPUFREQ] S5PV210: Add arm/int voltage control support
  [CPUFREQ] S5PV210: Add additional symantics for "relation" in cpufreq with pm
  [CPUFREQ] S3C64xx: Notify transition complete as soon as frequency changed
  [CPUFREQ] S3C6410: Support 800MHz operation in cpufreq
  [CPUFREQ] s5pv210-cpufreq.c: Add missing clk_put
  [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq
  [CPUFREQ] Remove some vi noise that escaped into the Makefile.
  [CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/
  [CPUFREQ/S3C64xx] Move S3C64xx CPUfreq driver into drivers/cpufreq
  [CPUFREQ] Handle CPUs with different capabilities in acpi-cpufreq

11 files changed, 241 insertions, 46 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1478c6171b0..83a7aa2ca57 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1895,10 +1895,6 @@ config CPU_FREQ_PXA
 	default y
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
-config CPU_FREQ_S3C64XX
-	bool "CPUfreq support for Samsung S3C64XX CPUs"
-	depends on CPU_FREQ && CPU_S3C6410
-
 config CPU_FREQ_S3C
 	bool
 	help
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 60fe5ecf359..1366995d8c2 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -15,7 +15,6 @@ obj-				:=
 obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 4657363f067..f5a7144a052 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -23,10 +23,6 @@ obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 obj-y				+= irq.o
 obj-y				+= irq-eint.o
 
-# CPU frequency scaling
-
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
-
 # DMA support
 
 obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 50907aca006..599a3c0e8f6 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -15,7 +15,6 @@ obj-				:=
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
 obj-$(CONFIG_S5PV210_PM)	+= pm.o sleep.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 
 # machine support
 
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 9fb84853d8e..e898215b88a 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -184,5 +184,10 @@ depends on X86
 source "drivers/cpufreq/Kconfig.x86"
 endmenu
 
+menu "ARM CPU frequency scaling drivers"
+depends on ARM
+source "drivers/cpufreq/Kconfig.arm"
+endmenu
+
 endif
 endmenu
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
new file mode 100644
index 00000000000..72a0044c1ba
--- /dev/null
+++ b/drivers/cpufreq/Kconfig.arm
@@ -0,0 +1,32 @@
+#
+# ARM CPU Frequency scaling drivers
+#
+
+config ARM_S3C64XX_CPUFREQ
+	bool "Samsung S3C64XX"
+	depends on CPU_S3C6410
+	default y
+	help
+	  This adds the CPUFreq driver for Samsung S3C6410 SoC.
+
+	  If in doubt, say N.
+
+config ARM_S5PV210_CPUFREQ
+	bool "Samsung S5PV210 and S5PC110"
+	depends on CPU_S5PV210
+	default y
+	help
+	  This adds the CPUFreq driver for Samsung S5PV210 and
+	  S5PC110 SoCs.
+
+	  If in doubt, say N.
+
+config ARM_EXYNOS4210_CPUFREQ
+	bool "Samsung EXYNOS4210"
+	depends on CPU_EXYNOS4210
+	default y
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4210
+	  SoC (S5PV310 or S5PC210).
+
+	  If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index e2fc2d21fa6..ab75e573c69 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
 # CPUfreq cross-arch helpers
 obj-$(CONFIG_CPU_FREQ_TABLE)		+= freq_table.o
 
-##################################################################################d
+##################################################################################
 # x86 drivers.
 # Link order matters. K8 is preferred to ACPI because of firmware bugs in early
 # K8 systems. ACPI is preferred to all other hardware-specific drivers.
@@ -37,7 +37,9 @@ obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
 obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
 obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
 
-##################################################################################d
-
+##################################################################################
 # ARM SoC drivers
 obj-$(CONFIG_UX500_SOC_DB8500)		+= db8500-cpufreq.o
+obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 596d5dd32f4..56c6c6b4eb4 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -655,7 +655,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	acpi_processor_notify_smm(THIS_MODULE);
 
 	/* Check for APERF/MPERF support in hardware */
-	if (cpu_has(c, X86_FEATURE_APERFMPERF))
+	if (boot_cpu_has(X86_FEATURE_APERFMPERF))
 		acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf;
 
 	pr_debug("CPU%u - ACPI performance management activated.\n", cpu);
diff --git a/arch/arm/mach-exynos4/cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index a1bd258f0c4..b7c3a84c4cf 100644
--- a/arch/arm/mach-exynos4/cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos4/cpufreq.c
- *
+/*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
@@ -192,17 +191,17 @@ static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = {
 	((200 << 16) | (6 << 8) | 4),
 };
 
-int exynos4_verify_speed(struct cpufreq_policy *policy)
+static int exynos4_verify_speed(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, exynos4_freq_table);
 }
 
-unsigned int exynos4_getspeed(unsigned int cpu)
+static unsigned int exynos4_getspeed(unsigned int cpu)
 {
 	return clk_get_rate(cpu_clk) / 1000;
 }
 
-void exynos4_set_clkdiv(unsigned int div_index)
+static void exynos4_set_clkdiv(unsigned int div_index)
 {
 	unsigned int tmp;
 
diff --git a/arch/arm/mach-s3c64xx/cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index 4375b97588b..b8d1d205e1e 100644
--- a/arch/arm/mach-s3c64xx/cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/cpufreq.c
- *
+/*
  * Copyright 2009 Wolfson Microelectronics plc
  *
  * S3C64xx CPUfreq Support
@@ -32,11 +31,14 @@ static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
 	[1] = { 1050000, 1150000 },
 	[2] = { 1100000, 1150000 },
 	[3] = { 1200000, 1350000 },
+	[4] = { 1300000, 1350000 },
 };
 
 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 	{ 0,  66000 },
+	{ 0, 100000 },
 	{ 0, 133000 },
+	{ 1, 200000 },
 	{ 1, 222000 },
 	{ 1, 266000 },
 	{ 2, 333000 },
@@ -44,6 +46,7 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 	{ 2, 532000 },
 	{ 2, 533000 },
 	{ 3, 667000 },
+	{ 4, 800000 },
 	{ 0, CPUFREQ_TABLE_END },
 };
 #endif
@@ -111,6 +114,8 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 		goto err;
 	}
 
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
 #ifdef CONFIG_REGULATOR
 	if (vddarm && freqs.new < freqs.old) {
 		ret = regulator_set_voltage(vddarm,
@@ -124,8 +129,6 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 	}
 #endif
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
 	pr_debug("cpufreq: Set actual frequency %lukHz\n",
 		 clk_get_rate(armclk) / 1000);
 
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 153af8b359e..a484aaea980 100644
--- a/arch/arm/mach-s5pv210/cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5pv210/cpufreq.c
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
@@ -17,6 +16,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/cpufreq.h>
+#include <linux/reboot.h>
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
@@ -25,11 +27,27 @@ static struct clk *cpu_clk;
 static struct clk *dmc0_clk;
 static struct clk *dmc1_clk;
 static struct cpufreq_freqs freqs;
+static DEFINE_MUTEX(set_freq_lock);
 
 /* APLL M,P,S values for 1G/800Mhz */
 #define APLL_VAL_1000	((1 << 31) | (125 << 16) | (3 << 8) | 1)
 #define APLL_VAL_800	((1 << 31) | (100 << 16) | (3 << 8) | 1)
 
+/* Use 800MHz when entering sleep mode */
+#define SLEEP_FREQ	(800 * 1000)
+
+/*
+ * relation has an additional symantics other than the standard of cpufreq
+ * DISALBE_FURTHER_CPUFREQ: disable further access to target
+ * ENABLE_FURTUER_CPUFREQ: enable access to target
+ */
+enum cpufreq_access {
+	DISABLE_FURTHER_CPUFREQ = 0x10,
+	ENABLE_FURTHER_CPUFREQ = 0x20,
+};
+
+static bool no_cpufreq_access;
+
 /*
  * DRAM configurations to calculate refresh counter for changing
  * frequency of memory.
@@ -66,6 +84,40 @@ static struct cpufreq_frequency_table s5pv210_freq_table[] = {
 	{0, CPUFREQ_TABLE_END},
 };
 
+static struct regulator *arm_regulator;
+static struct regulator *int_regulator;
+
+struct s5pv210_dvs_conf {
+	int arm_volt;	/* uV */
+	int int_volt;	/* uV */
+};
+
+static const int arm_volt_max = 1350000;
+static const int int_volt_max = 1250000;
+
+static struct s5pv210_dvs_conf dvs_conf[] = {
+	[L0] = {
+		.arm_volt	= 1250000,
+		.int_volt	= 1100000,
+	},
+	[L1] = {
+		.arm_volt	= 1200000,
+		.int_volt	= 1100000,
+	},
+	[L2] = {
+		.arm_volt	= 1050000,
+		.int_volt	= 1100000,
+	},
+	[L3] = {
+		.arm_volt	= 950000,
+		.int_volt	= 1100000,
+	},
+	[L4] = {
+		.arm_volt	= 950000,
+		.int_volt	= 1000000,
+	},
+};
+
 static u32 clkdiv_val[5][11] = {
 	/*
 	 * Clock divider value for following
@@ -122,7 +174,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
 	__raw_writel(tmp1, reg);
 }
 
-int s5pv210_verify_speed(struct cpufreq_policy *policy)
+static int s5pv210_verify_speed(struct cpufreq_policy *policy)
 {
 	if (policy->cpu)
 		return -EINVAL;
@@ -130,7 +182,7 @@ int s5pv210_verify_speed(struct cpufreq_policy *policy)
 	return cpufreq_frequency_table_verify(policy, s5pv210_freq_table);
 }
 
-unsigned int s5pv210_getspeed(unsigned int cpu)
+static unsigned int s5pv210_getspeed(unsigned int cpu)
 {
 	if (cpu)
 		return 0;
@@ -146,30 +198,66 @@ static int s5pv210_target(struct cpufreq_policy *policy,
 	unsigned int index, priv_index;
 	unsigned int pll_changing = 0;
 	unsigned int bus_speed_changing = 0;
+	int arm_volt, int_volt;
+	int ret = 0;
+
+	mutex_lock(&set_freq_lock);
+
+	if (relation & ENABLE_FURTHER_CPUFREQ)
+		no_cpufreq_access = false;
+
+	if (no_cpufreq_access) {
+#ifdef CONFIG_PM_VERBOSE
+		pr_err("%s:%d denied access to %s as it is disabled"
+				"temporarily\n", __FILE__, __LINE__, __func__);
+#endif
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	if (relation & DISABLE_FURTHER_CPUFREQ)
+		no_cpufreq_access = true;
+
+	relation &= ~(ENABLE_FURTHER_CPUFREQ | DISABLE_FURTHER_CPUFREQ);
 
 	freqs.old = s5pv210_getspeed(0);
 
 	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   target_freq, relation, &index))
-		return -EINVAL;
+					   target_freq, relation, &index)) {
+		ret = -EINVAL;
+		goto exit;
+	}
 
 	freqs.new = s5pv210_freq_table[index].frequency;
 	freqs.cpu = 0;
 
 	if (freqs.new == freqs.old)
-		return 0;
+		goto exit;
 
 	/* Finding current running level index */
 	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   freqs.old, relation, &priv_index))
-		return -EINVAL;
+					   freqs.old, relation, &priv_index)) {
+		ret = -EINVAL;
+		goto exit;
+	}
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	arm_volt = dvs_conf[index].arm_volt;
+	int_volt = dvs_conf[index].int_volt;
 
 	if (freqs.new > freqs.old) {
-		/* Voltage up: will be implemented */
+		ret = regulator_set_voltage(arm_regulator,
+				arm_volt, arm_volt_max);
+		if (ret)
+			goto exit;
+
+		ret = regulator_set_voltage(int_regulator,
+				int_volt, int_volt_max);
+		if (ret)
+			goto exit;
 	}
 
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
 	/* Check if there need to change PLL */
 	if ((index == L0) || (priv_index == L0))
 		pll_changing = 1;
@@ -380,15 +468,21 @@ static int s5pv210_target(struct cpufreq_policy *policy,
 		}
 	}
 
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
 	if (freqs.new < freqs.old) {
-		/* Voltage down: will be implemented */
-	}
+		regulator_set_voltage(int_regulator,
+				int_volt, int_volt_max);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+		regulator_set_voltage(arm_regulator,
+				arm_volt, arm_volt_max);
+	}
 
 	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
 
-	return 0;
+exit:
+	mutex_unlock(&set_freq_lock);
+	return ret;
 }
 
 #ifdef CONFIG_PM
@@ -416,6 +510,7 @@ static int check_mem_type(void __iomem *dmc_reg)
 static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
 {
 	unsigned long mem_type;
+	int ret;
 
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
@@ -423,19 +518,20 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
 
 	dmc0_clk = clk_get(NULL, "sclk_dmc0");
 	if (IS_ERR(dmc0_clk)) {
-		clk_put(cpu_clk);
-		return PTR_ERR(dmc0_clk);
+		ret = PTR_ERR(dmc0_clk);
+		goto out_dmc0;
 	}
 
 	dmc1_clk = clk_get(NULL, "hclk_msys");
 	if (IS_ERR(dmc1_clk)) {
-		clk_put(dmc0_clk);
-		clk_put(cpu_clk);
-		return PTR_ERR(dmc1_clk);
+		ret = PTR_ERR(dmc1_clk);
+		goto out_dmc1;
 	}
 
-	if (policy->cpu != 0)
-		return -EINVAL;
+	if (policy->cpu != 0) {
+		ret = -EINVAL;
+		goto out_dmc1;
+	}
 
 	/*
 	 * check_mem_type : This driver only support LPDDR & LPDDR2.
@@ -445,7 +541,8 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
 
 	if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
 		printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_dmc1;
 	}
 
 	/* Find current refresh counter and frequency each DMC */
@@ -462,6 +559,49 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.transition_latency = 40000;
 
 	return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
+
+out_dmc1:
+	clk_put(dmc0_clk);
+out_dmc0:
+	clk_put(cpu_clk);
+	return ret;
+}
+
+static int s5pv210_cpufreq_notifier_event(struct notifier_block *this,
+					  unsigned long event, void *ptr)
+{
+	int ret;
+
+	switch (event) {
+	case PM_SUSPEND_PREPARE:
+		ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ,
+					    DISABLE_FURTHER_CPUFREQ);
+		if (ret < 0)
+			return NOTIFY_BAD;
+
+		return NOTIFY_OK;
+	case PM_POST_RESTORE:
+	case PM_POST_SUSPEND:
+		cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ,
+				      ENABLE_FURTHER_CPUFREQ);
+
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this,
+						 unsigned long event, void *ptr)
+{
+	int ret;
+
+	ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ,
+				    DISABLE_FURTHER_CPUFREQ);
+	if (ret < 0)
+		return NOTIFY_BAD;
+
+	return NOTIFY_DONE;
 }
 
 static struct cpufreq_driver s5pv210_driver = {
@@ -477,8 +617,32 @@ static struct cpufreq_driver s5pv210_driver = {
 #endif
 };
 
+static struct notifier_block s5pv210_cpufreq_notifier = {
+	.notifier_call = s5pv210_cpufreq_notifier_event,
+};
+
+static struct notifier_block s5pv210_cpufreq_reboot_notifier = {
+	.notifier_call = s5pv210_cpufreq_reboot_notifier_event,
+};
+
 static int __init s5pv210_cpufreq_init(void)
 {
+	arm_regulator = regulator_get(NULL, "vddarm");
+	if (IS_ERR(arm_regulator)) {
+		pr_err("failed to get regulator vddarm");
+		return PTR_ERR(arm_regulator);
+	}
+
+	int_regulator = regulator_get(NULL, "vddint");
+	if (IS_ERR(int_regulator)) {
+		pr_err("failed to get regulator vddint");
+		regulator_put(arm_regulator);
+		return PTR_ERR(int_regulator);
+	}
+
+	register_pm_notifier(&s5pv210_cpufreq_notifier);
+	register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier);
+
 	return cpufreq_register_driver(&s5pv210_driver);
 }