Merge branch 'intel'

Jeff Kirsher says:

====================
This series contains updates to e1000e only.

All three patches come from Konstantin Khlebnikov to resolve power
management issues.  The first patch removes redundant and unbalanced
pci_disable_device() from the shutdown function.  The second patch
removes redundant actions from the driver and fixes the interaction
with actions in pci-bus runtime power management code.  The third
and last patch fixes some messages like 'Error reading PHY register'
and 'Hardware Erorr' and saves several seconds on reboot.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 34 insertions, 61 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 2c1813737f6..f91a8f3f9d4 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
 #include <linux/mdio.h>
+#include <linux/pm_runtime.h>
 
 #include "e1000.h"
 
@@ -2229,7 +2230,19 @@ static int e1000e_get_ts_info(struct net_device *netdev,
 	return 0;
 }
 
+static int e1000e_ethtool_begin(struct net_device *netdev)
+{
+	return pm_runtime_get_sync(netdev->dev.parent);
+}
+
+static void e1000e_ethtool_complete(struct net_device *netdev)
+{
+	pm_runtime_put_sync(netdev->dev.parent);
+}
+
 static const struct ethtool_ops e1000_ethtool_ops = {
+	.begin			= e1000e_ethtool_begin,
+	.complete		= e1000e_ethtool_complete,
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
 	.get_drvinfo		= e1000_get_drvinfo,
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a177b8b65c4..948b86ffa4f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4303,6 +4303,7 @@ static int e1000_open(struct net_device *netdev)
 	netif_start_queue(netdev);
 
 	adapter->idle_check = true;
+	hw->mac.get_link_status = true;
 	pm_runtime_put(&pdev->dev);
 
 	/* fire a link status change interrupt to start the watchdog */
@@ -4662,6 +4663,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 	    (adapter->hw.phy.media_type == e1000_media_type_copper)) {
 		int ret_val;
 
+		pm_runtime_get_sync(&adapter->pdev->dev);
 		ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
 		ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
 		ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
@@ -4672,6 +4674,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 		ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
 		if (ret_val)
 			e_warn("Error reading PHY register\n");
+		pm_runtime_put_sync(&adapter->pdev->dev);
 	} else {
 		/* Do not read PHY registers if link is not up
 		 * Set values to typical power-on defaults
@@ -5887,8 +5890,7 @@ release:
 	return retval;
 }
 
-static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
-			    bool runtime)
+static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5912,10 +5914,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	}
 	e1000e_reset_interrupt_capability(adapter);
 
-	retval = pci_save_state(pdev);
-	if (retval)
-		return retval;
-
 	status = er32(STATUS);
 	if (status & E1000_STATUS_LU)
 		wufc &= ~E1000_WUFC_LNKC;
@@ -5971,13 +5969,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
 		ew32(WUFC, 0);
 	}
 
-	*enable_wake = !!wufc;
-
-	/* make sure adapter isn't asleep if manageability is enabled */
-	if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
-	    (hw->mac.ops.check_mng_mode(hw)))
-		*enable_wake = true;
-
 	if (adapter->hw.phy.type == e1000_phy_igp_3)
 		e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
 
@@ -5986,27 +5977,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	 */
 	e1000e_release_hw_control(adapter);
 
-	pci_disable_device(pdev);
-
-	return 0;
-}
-
-static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
-{
-	if (sleep && wake) {
-		pci_prepare_to_sleep(pdev);
-		return;
-	}
-
-	pci_wake_from_d3(pdev, wake);
-	pci_set_power_state(pdev, PCI_D3hot);
-}
-
-static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
-                                    bool wake)
-{
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct e1000_adapter *adapter = netdev_priv(netdev);
+	pci_clear_master(pdev);
 
 	/* The pci-e switch on some quad port adapters will report a
 	 * correctable error when the MAC transitions from D0 to D3.  To
@@ -6021,12 +5992,13 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
 		pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
 					   (devctl & ~PCI_EXP_DEVCTL_CERE));
 
-		e1000_power_off(pdev, sleep, wake);
+		pci_save_state(pdev);
+		pci_prepare_to_sleep(pdev);
 
 		pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
-	} else {
-		e1000_power_off(pdev, sleep, wake);
 	}
+
+	return 0;
 }
 
 #ifdef CONFIG_PCIEASPM
@@ -6084,9 +6056,7 @@ static int __e1000_resume(struct pci_dev *pdev)
 	if (aspm_disable_flag)
 		e1000e_disable_aspm(pdev, aspm_disable_flag);
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	pci_save_state(pdev);
+	pci_set_master(pdev);
 
 	e1000e_set_interrupt_capability(adapter);
 	if (netif_running(netdev)) {
@@ -6152,14 +6122,8 @@ static int __e1000_resume(struct pci_dev *pdev)
 static int e1000_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	int retval;
-	bool wake;
-
-	retval = __e1000_shutdown(pdev, &wake, false);
-	if (!retval)
-		e1000_complete_shutdown(pdev, true, wake);
 
-	return retval;
+	return __e1000_shutdown(pdev, false);
 }
 
 static int e1000_resume(struct device *dev)
@@ -6182,13 +6146,10 @@ static int e1000_runtime_suspend(struct device *dev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	if (e1000e_pm_ready(adapter)) {
-		bool wake;
-
-		__e1000_shutdown(pdev, &wake, true);
-	}
+	if (!e1000e_pm_ready(adapter))
+		return 0;
 
-	return 0;
+	return __e1000_shutdown(pdev, true);
 }
 
 static int e1000_idle(struct device *dev)
@@ -6226,12 +6187,7 @@ static int e1000_runtime_resume(struct device *dev)
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
-	bool wake = false;
-
-	__e1000_shutdown(pdev, &wake, false);
-
-	if (system_state == SYSTEM_POWER_OFF)
-		e1000_complete_shutdown(pdev, false, wake);
+	__e1000_shutdown(pdev, false);
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -6352,9 +6308,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 			"Cannot re-enable PCI device after reset.\n");
 		result = PCI_ERS_RESULT_DISCONNECT;
 	} else {
-		pci_set_master(pdev);
 		pdev->state_saved = true;
 		pci_restore_state(pdev);
+		pci_set_master(pdev);
 
 		pci_enable_wake(pdev, PCI_D3hot, 0);
 		pci_enable_wake(pdev, PCI_D3cold, 0);
@@ -6783,7 +6739,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* initialize the wol settings based on the eeprom settings */
 	adapter->wol = adapter->eeprom_wol;
-	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+	/* make sure adapter isn't asleep if manageability is enabled */
+	if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
+	    (hw->mac.ops.check_mng_mode(hw)))
+		device_wakeup_enable(&pdev->dev);
 
 	/* save off EEPROM version number */
 	e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);