USB: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 files changed, 18 insertions, 18 deletions

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index fad5d916564..c5ec1a55eee 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -999,7 +999,7 @@ static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
 		bi.dwAddress = swab32(blockidx->PageAddress);
 
 		uea_dbg(INS_TO_USBDEV(sc),
-		       "sending block %u for DSP page %u size %u adress %x\n",
+		       "sending block %u for DSP page %u size %u address %x\n",
 		       blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress));
 
 		/* send block info through the IDMA pipe */
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b0f9873ce6b..bcc42136c93 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -915,7 +915,7 @@ next_desc:
 	}
 	
 	if (data_interface_num != call_interface_num)
-		dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
+		dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n");
 
 skip_normal_probe:
 
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index aecc7225a8c..f3095a90a0e 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -53,7 +53,7 @@
 #define     AT91_UDP_RXRSM	(1 <<  9)	/* USB Resume Interrupt Status */
 #define     AT91_UDP_EXTRSM	(1 << 10)	/* External Resume Interrupt Status [AT91RM9200 only] */
 #define     AT91_UDP_SOFINT	(1 << 11)	/* Start of Frame Interrupt Status */
-#define     AT91_UDP_ENDBUSRES	(1 << 12)	/* End of Bus Reset Interrpt Status */
+#define     AT91_UDP_ENDBUSRES	(1 << 12)	/* End of Bus Reset Interrupt Status */
 #define     AT91_UDP_WAKEUP	(1 << 13)	/* USB Wakeup Interrupt Status [AT91RM9200 only] */
 
 #define AT91_UDP_ICR		0x20		/* Interrupt Clear Register */
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index d59eb92a847..63e8fa3a69e 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1896,7 +1896,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 
 	spin_lock_irqsave(&udc->lock, flags);
 
-	/* ------basic driver infomation ---- */
+	/* ------basic driver information ---- */
 	t = scnprintf(next, size,
 			DRIVER_DESC "\n"
 			"%s version: %s\n"
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 7d6bef56cb0..e6d68bda428 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1028,7 +1028,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 				/* STATUS for zero length DATA stages is
 				 * always an IN ... even for IN transfers,
-				 * a wierd case which seem to stall OMAP.
+				 * a weird case which seem to stall OMAP.
 				 */
 				UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR);
 				UDC_CTRL_REG = UDC_CLR_EP;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f35795fbd89..adb0defa163 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -25,7 +25,7 @@
 
 #include "ehci-fsl.h"
 
-/* FIXME: Power Managment is un-ported so temporarily disable it */
+/* FIXME: Power Management is un-ported so temporarily disable it */
 #undef CONFIG_PM
 
 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 80d99bce2b3..dce305bd62a 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -211,7 +211,7 @@ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
  * low/fullspeed transfer can "carry over" from one uframe to the next,
  * since the TT just performs downstream transfers in sequence.
  *
- * For example two seperate 100 usec transfers can start in the same uframe,
+ * For example two separate 100 usec transfers can start in the same uframe,
  * and the second one would "carry over" 75 usecs into the next uframe.
  */
 static void
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index fe9ceb077d9..57388252b69 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -405,7 +405,7 @@
 
 struct r8a66597_pipe_info {
 	u16 pipenum;
-	u16 address;	/* R8A66597 HCD usb addres */
+	u16 address;	/* R8A66597 HCD usb address */
 	u16 epnum;
 	u16 maxpacket;
 	u16 type;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 8832a72bb1f..cb7fa0eaf3a 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -323,7 +323,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned int pipe, void *data,
 			usb_kill_urb(urb);
 			retval = -ETIMEDOUT;
 		} else {
-			/* URB completed within timout */
+			/* URB completed within timeout */
 			retval = urb->status;
 			readbytes = urb->actual_length;
 		}
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index f1b886c204c..da922dfc0dc 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1312,7 +1312,7 @@ static int ctrl_out (struct usbtest_dev *dev,
 		len += vary;
 
 		/* [real world] the "zero bytes IN" case isn't really used.
-		 * hardware can easily trip up in this wierd case, since its
+		 * hardware can easily trip up in this weird case, since its
 		 * status stage is IN, not OUT like other ep0in transfers.
 		 */
 		if (len > length)
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index a5d2e115e16..3428ccc28da 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -959,7 +959,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
  *
  *	This function will block the close until one of the following:
  *		1. Response to our Chase comes from Edgeport
- *		2. A timout of 10 seconds without activity has expired
+ *		2. A timeout of 10 seconds without activity has expired
  *		   (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
  *
  ************************************************************************/
@@ -999,7 +999,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
 				return;
 			}
 		} else {
-			// Reset timout value back to 10 seconds
+			// Reset timeout value back to 10 seconds
 			dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits);
 			loop = 10;
 		}
@@ -1014,7 +1014,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
  *	This function will block the close until one of the following:
  *		1. TX count are 0
  *		2. The edgeport has stopped
- *		3. A timout of 3 seconds without activity has expired
+ *		3. A timeout of 3 seconds without activity has expired
  *
  ************************************************************************/
 static void block_until_tx_empty (struct edgeport_port *edge_port)
@@ -1050,7 +1050,7 @@ static void block_until_tx_empty (struct edgeport_port *edge_port)
 				return;
 			}
 		} else {
-			// Reset timout value back to seconds
+			// Reset timeout value back to seconds
 			loop = 30;
 		}
 	}
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c29c9127113..869ecd374cb 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1133,7 +1133,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
  *	This function will block the close until one of the following:
  *		1. TX count are 0
  *		2. The mos7840 has stopped
- *		3. A timout of 3 seconds without activity has expired
+ *		3. A timeout of 3 seconds without activity has expired
  *
  ************************************************************************/
 static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
@@ -1161,7 +1161,7 @@ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
 			dbg("%s - TIMEOUT", __FUNCTION__);
 			return;
 		} else {
-			/* Reset timout value back to seconds */
+			/* Reset timeout value back to seconds */
 			wait = 30;
 		}
 	}
@@ -1275,7 +1275,7 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
  *
  *	This function will block the close until one of the following:
  *		1. Response to our Chase comes from mos7840
- *		2. A timout of 10 seconds without activity has expired
+ *		2. A timeout of 10 seconds without activity has expired
  *		   (1K of mos7840 data @ 2400 baud ==> 4 sec to empty)
  *
  ************************************************************************/
@@ -1304,7 +1304,7 @@ static void mos7840_block_until_chase_response(struct moschip_port
 			dbg("%s - TIMEOUT", __FUNCTION__);
 			return;
 		} else {
-			/* Reset timout value back to seconds */
+			/* Reset timeout value back to seconds */
 			wait = 10;
 		}
 	}