Merge branch 'pxa-palm' into pxa-machines

Conflicts:

	drivers/mfd/Kconfig
	drivers/pcmcia/Makefile

20 files changed, 2403 insertions, 452 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index d02ee7b6cd9..96b0137a575 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -623,6 +623,12 @@ M:	marek.vasut@gmail.com
 W:	http://hackndev.com
 S:	Maintained
 
+ARM/PALMZ72 SUPPORT
+P:     Sergey Lapin
+M:     slapin@ossfans.org
+W:     http://hackndev.com
+S:     Maintained
+
 ARM/PLEB SUPPORT
 P:	Peter Chubb
 M:	pleb@gelato.unsw.edu.au
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
new file mode 100644
index 00000000000..3245f8f33e0
--- /dev/null
+++ b/arch/arm/configs/palmz72_defconfig
@@ -0,0 +1,951 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Sun Aug 24 02:29:27 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_ARCH_PXA_PALM=y
+# CONFIG_MACH_PALMTX is not set
+CONFIG_MACH_PALMZ72=y
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PXA is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index d056e0ff781..5548abd6390 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -288,6 +288,16 @@ config MACH_PALMTX
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
 
+config MACH_PALMZ72
+	bool "Palm Zire 72"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on Palm Zire 72
+	  handheld computer.
+
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0d213ec58b1..30936e40fea 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
 obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
 obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
new file mode 100644
index 00000000000..8fd30bcecb7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -0,0 +1,67 @@
+/*
+ * GPIOs and interrupts for Palm Zire72 Handheld Computer
+ *
+ * Authors:	Alex Osborne <bobofdoom@gmail.com>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMZ72_H_
+#define _INCLUDE_PALMZ72_H_
+
+/* Power and control */
+#define GPIO_NR_PALMZ72_GPIO_RESET		1
+#define GPIO_NR_PALMZ72_POWER_DETECT		0
+
+/* SD/MMC */
+#define GPIO_NR_PALMZ72_SD_DETECT_N		14
+#define GPIO_NR_PALMZ72_SD_POWER_N		98
+#define GPIO_NR_PALMZ72_SD_RO 115
+
+/* Touchscreen */
+#define GPIO_NR_PALMZ72_WM9712_IRQ		27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMZ72_IR_DISABLE		49
+
+/* USB */
+#define GPIO_NR_PALMZ72_USB_DETECT_N		15
+#define GPIO_NR_PALMZ72_USB_POWER		95
+#define GPIO_NR_PALMZ72_USB_PULLUP		12
+
+/* LCD/Backlight */
+#define GPIO_NR_PALMZ72_BL_POWER		20
+#define GPIO_NR_PALMZ72_LCD_POWER		96
+
+/* LED */
+#define GPIO_NR_PALMZ72_LED_GREEN		88
+
+/* Bluetooth */
+#define GPIO_NR_PALMZ72_BT_POWER		17
+#define GPIO_NR_PALMZ72_BT_RESET		83
+
+/** Initial values **/
+
+/* Battery */
+#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMZ72_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
+
+/* Backlight */
+#define PALMZ72_MAX_INTENSITY		0xFE
+#define PALMZ72_DEFAULT_INTENSITY	0x7E
+#define PALMZ72_LIMIT_MASK		0x7F
+#define PALMZ72_PRESCALER		0x3F
+#define PALMZ72_PERIOD_NS		3500
+
+#endif
+
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fe924a23deb..4447711c9fc 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -25,6 +25,8 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -340,6 +342,23 @@ static struct platform_device power_supply = {
 };
 
 /******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMTX_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMTX_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmtx_lcd_modes[] = {
@@ -401,6 +420,7 @@ static void __init palmtx_init(void)
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
new file mode 100644
index 00000000000..a90b4d77a20
--- /dev/null
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -0,0 +1,480 @@
+/*
+ * Hardware definitions for Palm Zire72
+ *
+ * Authors:
+ *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
+ *	Sergey Lapin <slapin@ossfans.org>
+ *	Alex Osborne <bobofdoom@gmail.com>
+ *	Jan Herman <2hp@seznam.cz>
+ *
+ * Rewrite for mainline:
+ *	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmz72.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/pm.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmz72_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO115_GPIO,	/* SD RO */
+	GPIO98_GPIO,	/* SD power */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO49_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO15_GPIO,	/* usb detect */
+	GPIO12_GPIO,	/* usb pullup */
+	GPIO95_GPIO,	/* usb power */
+
+	/* Matrix keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO20_GPIO,	/* bl power */
+	GPIO21_GPIO,	/* LCD border switch */
+	GPIO22_GPIO,	/* LCD border color */
+	GPIO96_GPIO,	/* lcd power */
+
+	/* Misc. */
+	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
+	GPIO88_GPIO,				/* green led */
+	GPIO27_GPIO,				/* WM9712 IRQ */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmz72_mci_init(struct device *dev,
+				irq_handler_t palmz72_detect_int, void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
+			palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		goto err2;
+	}
+
+	/* SD_POWER is not actually power, but it is more like chip
+	 * select, i.e. it is inverted */
+
+	err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
+	if (err)
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+	if (err)
+		goto err4;
+	err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
+	if (err)
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
+	if (err)
+		goto err5;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMZ72_SD_RO);
+err4:
+	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void palmz72_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+	gpio_free(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static void palmz72_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	if (p_d->ocr_mask & (1 << vdd))
+		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+	else
+		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
+}
+
+static int palmz72_mci_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static struct pxamci_platform_data palmz72_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmz72_mci_power,
+	.get_ro		= palmz72_mci_ro,
+	.init 		= palmz72_mci_init,
+	.exit		= palmz72_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmz72_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmz72_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmz72_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmz72_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmz72_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmz72_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmz72_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMZ72_MAX_INTENSITY,
+	.dft_brightness	= PALMZ72_MAX_INTENSITY,
+	.pwm_period_ns	= PALMZ72_PERIOD_NS,
+	.init		= palmz72_backlight_init,
+	.notify		= palmz72_backlight_notify,
+	.exit		= palmz72_backlight_exit,
+};
+
+static struct platform_device palmz72_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmz72_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmz72_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmz72_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+}
+
+static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmz72_ficp_platform_data = {
+	.startup		= palmz72_irda_startup,
+	.shutdown		= palmz72_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= palmz72_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "palmz72:green:led",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmz72_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	}
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int palmz72_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static int palmz72_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static char *palmz72_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmz72_is_ac_online,
+	.is_usb_online   = palmz72_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmz72_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmz72_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmz72_lcd_modes[] = {
+{
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmz72_lcd_screen = {
+	.modes		= palmz72_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmz72_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&palmz72_backlight,
+	&palmz72_leds,
+	&power_supply,
+};
+
+static void __init palmz72_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+	set_pxa_fb_info(&palmz72_lcd_screen);
+	pxa_set_mci_info(&palmz72_mci_platform_data);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmz72_ficp_platform_data);
+	pxa_set_keypad_info(&palmz72_keypad_platform_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMZ72, "Palm Zire72")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmz72_init
+MACHINE_END
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 25287e80e23..6e1e8c624f9 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -220,6 +220,7 @@ config TOUCHSCREEN_ATMEL_TSADCC
 config TOUCHSCREEN_UCB1400
 	tristate "Philips UCB1400 touchscreen"
 	select AC97_BUS
+	depends on UCB1400_CORE
 	help
 	  This enables support for the Philips UCB1400 touchscreen interface.
 	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index bce018e45bc..54986627def 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -5,6 +5,10 @@
  *  Created:	September 25, 2006
  *  Copyright:	MontaVista Software, Inc.
  *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -25,124 +29,16 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
-
-#include <sound/core.h>
-#include <sound/ac97_codec.h>
-
-
-/*
- * Interesting UCB1400 AC-link registers
- */
-
-#define UCB_IE_RIS		0x5e
-#define UCB_IE_FAL		0x60
-#define UCB_IE_STATUS		0x62
-#define UCB_IE_CLEAR		0x62
-#define UCB_IE_ADC		(1 << 11)
-#define UCB_IE_TSPX		(1 << 12)
-
-#define UCB_TS_CR		0x64
-#define UCB_TS_CR_TSMX_POW	(1 << 0)
-#define UCB_TS_CR_TSPX_POW	(1 << 1)
-#define UCB_TS_CR_TSMY_POW	(1 << 2)
-#define UCB_TS_CR_TSPY_POW	(1 << 3)
-#define UCB_TS_CR_TSMX_GND	(1 << 4)
-#define UCB_TS_CR_TSPX_GND	(1 << 5)
-#define UCB_TS_CR_TSMY_GND	(1 << 6)
-#define UCB_TS_CR_TSPY_GND	(1 << 7)
-#define UCB_TS_CR_MODE_INT	(0 << 8)
-#define UCB_TS_CR_MODE_PRES	(1 << 8)
-#define UCB_TS_CR_MODE_POS	(2 << 8)
-#define UCB_TS_CR_BIAS_ENA	(1 << 11)
-#define UCB_TS_CR_TSPX_LOW	(1 << 12)
-#define UCB_TS_CR_TSMX_LOW	(1 << 13)
-
-#define UCB_ADC_CR		0x66
-#define UCB_ADC_SYNC_ENA	(1 << 0)
-#define UCB_ADC_VREFBYP_CON	(1 << 1)
-#define UCB_ADC_INP_TSPX	(0 << 2)
-#define UCB_ADC_INP_TSMX	(1 << 2)
-#define UCB_ADC_INP_TSPY	(2 << 2)
-#define UCB_ADC_INP_TSMY	(3 << 2)
-#define UCB_ADC_INP_AD0		(4 << 2)
-#define UCB_ADC_INP_AD1		(5 << 2)
-#define UCB_ADC_INP_AD2		(6 << 2)
-#define UCB_ADC_INP_AD3		(7 << 2)
-#define UCB_ADC_EXT_REF		(1 << 5)
-#define UCB_ADC_START		(1 << 7)
-#define UCB_ADC_ENA		(1 << 15)
-
-#define UCB_ADC_DATA		0x68
-#define UCB_ADC_DAT_VALID	(1 << 15)
-#define UCB_ADC_DAT_VALUE(x)	((x) & 0x3ff)
-
-#define UCB_ID			0x7e
-#define UCB_ID_1400             0x4304
-
-
-struct ucb1400 {
-	struct snd_ac97		*ac97;
-	struct input_dev	*ts_idev;
-
-	int			irq;
-
-	wait_queue_head_t	ts_wait;
-	struct task_struct	*ts_task;
-
-	unsigned int		irq_pending;	/* not bit field shared */
-	unsigned int		ts_restart:1;
-	unsigned int		adcsync:1;
-};
+#include <linux/ucb1400.h>
 
 static int adcsync;
 static int ts_delay = 55; /* us */
 static int ts_delay_pressure;	/* us */
 
-static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg)
-{
-	return ucb->ac97->bus->ops->read(ucb->ac97, reg);
-}
-
-static inline void ucb1400_reg_write(struct ucb1400 *ucb, u16 reg, u16 val)
-{
-	ucb->ac97->bus->ops->write(ucb->ac97, reg, val);
-}
-
-static inline void ucb1400_adc_enable(struct ucb1400 *ucb)
-{
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
-}
-
-static unsigned int ucb1400_adc_read(struct ucb1400 *ucb, u16 adc_channel)
-{
-	unsigned int val;
-
-	if (ucb->adcsync)
-		adc_channel |= UCB_ADC_SYNC_ENA;
-
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel | UCB_ADC_START);
-
-	for (;;) {
-		val = ucb1400_reg_read(ucb, UCB_ADC_DATA);
-		if (val & UCB_ADC_DAT_VALID)
-			break;
-		/* yield to other processes */
-		schedule_timeout_uninterruptible(1);
-	}
-
-	return UCB_ADC_DAT_VALUE(val);
-}
-
-static inline void ucb1400_adc_disable(struct ucb1400 *ucb)
-{
-	ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
-}
-
 /* Switch to interrupt mode. */
-static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
+static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
 			UCB_TS_CR_MODE_INT);
@@ -152,14 +48,14 @@ static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
  * Switch to pressure mode, and read pressure.  We don't need to wait
  * here, since both plates are being driven.
  */
-static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
 	udelay(ts_delay_pressure);
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
 }
 
 /*
@@ -168,21 +64,21 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
  * gives a faster response time.  Even so, we need to wait about 55us
  * for things to stabilise.
  */
-static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
 
 	udelay(ts_delay);
 
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
 }
 
 /*
@@ -191,63 +87,63 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
  * gives a faster response time.  Even so, we need to wait about 55us
  * for things to stabilise.
  */
-static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
 
 	udelay(ts_delay);
 
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX);
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
 }
 
 /*
  * Switch to X plate resistance mode.  Set MX to ground, PX to
  * supply.  Measure current.
  */
-static inline unsigned int ucb1400_ts_read_xres(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	return ucb1400_adc_read(ucb, 0);
+	return ucb1400_adc_read(ucb->ac97, 0, adcsync);
 }
 
 /*
  * Switch to Y plate resistance mode.  Set MY to ground, PY to
  * supply.  Measure current.
  */
-static inline unsigned int ucb1400_ts_read_yres(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	return ucb1400_adc_read(ucb, 0);
+	return ucb1400_adc_read(ucb->ac97, 0, adcsync);
 }
 
-static inline int ucb1400_ts_pen_down(struct ucb1400 *ucb)
+static inline int ucb1400_ts_pen_down(struct snd_ac97 *ac97)
 {
-	unsigned short val = ucb1400_reg_read(ucb, UCB_TS_CR);
-	return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+	unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR);
+	return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
 }
 
-static inline void ucb1400_ts_irq_enable(struct ucb1400 *ucb)
+static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
 {
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, UCB_IE_TSPX);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_TSPX);
+	ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
+	ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX);
 }
 
-static inline void ucb1400_ts_irq_disable(struct ucb1400 *ucb)
+static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
 {
-	ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
+	ucb1400_reg_write(ac97, UCB_IE_FAL, 0);
 }
 
 static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
@@ -264,25 +160,24 @@ static void ucb1400_ts_event_release(struct input_dev *idev)
 	input_sync(idev);
 }
 
-static void ucb1400_handle_pending_irq(struct ucb1400 *ucb)
+static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
 {
 	unsigned int isr;
 
-	isr = ucb1400_reg_read(ucb, UCB_IE_STATUS);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, isr);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
-	if (isr & UCB_IE_TSPX)
-		ucb1400_ts_irq_disable(ucb);
-	else
+	if (isr & UCB_IE_TSPX) {
+		ucb1400_ts_irq_disable(ucb->ac97);
+		enable_irq(ucb->irq);
+	} else
 		printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
-
-	enable_irq(ucb->irq);
 }
 
 static int ucb1400_ts_thread(void *_ucb)
 {
-	struct ucb1400 *ucb = _ucb;
+	struct ucb1400_ts *ucb = _ucb;
 	struct task_struct *tsk = current;
 	int valid = 0;
 	struct sched_param param = { .sched_priority = 1 };
@@ -301,19 +196,19 @@ static int ucb1400_ts_thread(void *_ucb)
 			ucb1400_handle_pending_irq(ucb);
 		}
 
-		ucb1400_adc_enable(ucb);
+		ucb1400_adc_enable(ucb->ac97);
 		x = ucb1400_ts_read_xpos(ucb);
 		y = ucb1400_ts_read_ypos(ucb);
 		p = ucb1400_ts_read_pressure(ucb);
-		ucb1400_adc_disable(ucb);
+		ucb1400_adc_disable(ucb->ac97);
 
 		/* Switch back to interrupt mode. */
-		ucb1400_ts_mode_int(ucb);
+		ucb1400_ts_mode_int(ucb->ac97);
 
 		msleep(10);
 
-		if (ucb1400_ts_pen_down(ucb)) {
-			ucb1400_ts_irq_enable(ucb);
+		if (ucb1400_ts_pen_down(ucb->ac97)) {
+			ucb1400_ts_irq_enable(ucb->ac97);
 
 			/*
 			 * If we spat out a valid sample set last time,
@@ -332,8 +227,8 @@ static int ucb1400_ts_thread(void *_ucb)
 		}
 
 		wait_event_freezable_timeout(ucb->ts_wait,
-			ucb->irq_pending || ucb->ts_restart || kthread_should_stop(),
-			timeout);
+			ucb->irq_pending || ucb->ts_restart ||
+			kthread_should_stop(), timeout);
 	}
 
 	/* Send the "pen off" if we are stopping with the pen still active */
@@ -356,7 +251,7 @@ static int ucb1400_ts_thread(void *_ucb)
  */
 static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
 {
-	struct ucb1400 *ucb = devid;
+	struct ucb1400_ts *ucb = devid;
 
 	if (irqnr == ucb->irq) {
 		disable_irq(ucb->irq);
@@ -369,7 +264,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
 
 static int ucb1400_ts_open(struct input_dev *idev)
 {
-	struct ucb1400 *ucb = input_get_drvdata(idev);
+	struct ucb1400_ts *ucb = input_get_drvdata(idev);
 	int ret = 0;
 
 	BUG_ON(ucb->ts_task);
@@ -385,34 +280,14 @@ static int ucb1400_ts_open(struct input_dev *idev)
 
 static void ucb1400_ts_close(struct input_dev *idev)
 {
-	struct ucb1400 *ucb = input_get_drvdata(idev);
+	struct ucb1400_ts *ucb = input_get_drvdata(idev);
 
 	if (ucb->ts_task)
 		kthread_stop(ucb->ts_task);
 
-	ucb1400_ts_irq_disable(ucb);
-	ucb1400_reg_write(ucb, UCB_TS_CR, 0);
-}
-
-#ifdef CONFIG_PM
-static int ucb1400_ts_resume(struct device *dev)
-{
-	struct ucb1400 *ucb = dev_get_drvdata(dev);
-
-	if (ucb->ts_task) {
-		/*
-		 * Restart the TS thread to ensure the
-		 * TS interrupt mode is set up again
-		 * after sleep.
-		 */
-		ucb->ts_restart = 1;
-		wake_up(&ucb->ts_wait);
-	}
-	return 0;
+	ucb1400_ts_irq_disable(ucb->ac97);
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
 }
-#else
-#define ucb1400_ts_resume NULL
-#endif
 
 #ifndef NO_IRQ
 #define NO_IRQ	0
@@ -422,25 +297,26 @@ static int ucb1400_ts_resume(struct device *dev)
  * Try to probe our interrupt, rather than relying on lots of
  * hard-coded machine dependencies.
  */
-static int ucb1400_detect_irq(struct ucb1400 *ucb)
+static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
 {
 	unsigned long mask, timeout;
 
 	mask = probe_irq_on();
 
 	/* Enable the ADC interrupt. */
-	ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
 	/* Cause an ADC interrupt. */
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
 
 	/* Wait for the conversion to complete. */
 	timeout = jiffies + HZ/2;
-	while (!(ucb1400_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VALID)) {
+	while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
+						UCB_ADC_DAT_VALID)) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
 			printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
@@ -448,13 +324,13 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
 			return -ENODEV;
 		}
 	}
-	ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
 
 	/* Disable and clear interrupt. */
-	ucb1400_reg_write(ucb, UCB_IE_RIS, 0);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
 	/* Read triggered interrupt. */
 	ucb->irq = probe_irq_off(mask);
@@ -464,36 +340,25 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
 	return 0;
 }
 
-static int ucb1400_ts_probe(struct device *dev)
+static int ucb1400_ts_probe(struct platform_device *dev)
 {
-	struct ucb1400 *ucb;
-	struct input_dev *idev;
-	int error, id, x_res, y_res;
+	int error, x_res, y_res;
+	struct ucb1400_ts *ucb = dev->dev.platform_data;
 
-	ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
-	idev = input_allocate_device();
-	if (!ucb || !idev) {
+	ucb->ts_idev = input_allocate_device();
+	if (!ucb->ts_idev) {
 		error = -ENOMEM;
-		goto err_free_devs;
+		goto err;
 	}
 
-	ucb->ts_idev = idev;
-	ucb->adcsync = adcsync;
-	ucb->ac97 = to_ac97_t(dev);
-	init_waitqueue_head(&ucb->ts_wait);
-
-	id = ucb1400_reg_read(ucb, UCB_ID);
-	if (id != UCB_ID_1400) {
-		error = -ENODEV;
-		goto err_free_devs;
-	}
-
-	error = ucb1400_detect_irq(ucb);
+	error = ucb1400_ts_detect_irq(ucb);
 	if (error) {
 		printk(KERN_ERR "UCB1400: IRQ probe failed\n");
 		goto err_free_devs;
 	}
 
+	init_waitqueue_head(&ucb->ts_wait);
+
 	error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
 				"UCB1400", ucb);
 	if (error) {
@@ -503,80 +368,101 @@ static int ucb1400_ts_probe(struct device *dev)
 	}
 	printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
 
-	input_set_drvdata(idev, ucb);
+	input_set_drvdata(ucb->ts_idev, ucb);
 
-	idev->dev.parent	= dev;
-	idev->name		= "UCB1400 touchscreen interface";
-	idev->id.vendor		= ucb1400_reg_read(ucb, AC97_VENDOR_ID1);
-	idev->id.product	= id;
-	idev->open		= ucb1400_ts_open;
-	idev->close		= ucb1400_ts_close;
-	idev->evbit[0]		= BIT_MASK(EV_ABS);
+	ucb->ts_idev->dev.parent	= &dev->dev;
+	ucb->ts_idev->name		= "UCB1400 touchscreen interface";
+	ucb->ts_idev->id.vendor		= ucb1400_reg_read(ucb->ac97,
+						AC97_VENDOR_ID1);
+	ucb->ts_idev->id.product	= ucb->id;
+	ucb->ts_idev->open		= ucb1400_ts_open;
+	ucb->ts_idev->close		= ucb1400_ts_close;
+	ucb->ts_idev->evbit[0]		= BIT_MASK(EV_ABS);
 
-	ucb1400_adc_enable(ucb);
+	ucb1400_adc_enable(ucb->ac97);
 	x_res = ucb1400_ts_read_xres(ucb);
 	y_res = ucb1400_ts_read_yres(ucb);
-	ucb1400_adc_disable(ucb);
+	ucb1400_adc_disable(ucb->ac97);
 	printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
 
-	input_set_abs_params(idev, ABS_X, 0, x_res, 0, 0);
-	input_set_abs_params(idev, ABS_Y, 0, y_res, 0, 0);
-	input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
 
-	error = input_register_device(idev);
+	error = input_register_device(ucb->ts_idev);
 	if (error)
 		goto err_free_irq;
 
-	dev_set_drvdata(dev, ucb);
 	return 0;
 
- err_free_irq:
+err_free_irq:
 	free_irq(ucb->irq, ucb);
- err_free_devs:
-	input_free_device(idev);
-	kfree(ucb);
+err_free_devs:
+	input_free_device(ucb->ts_idev);
+err:
 	return error;
+
 }
 
-static int ucb1400_ts_remove(struct device *dev)
+static int ucb1400_ts_remove(struct platform_device *dev)
 {
-	struct ucb1400 *ucb = dev_get_drvdata(dev);
+	struct ucb1400_ts *ucb = dev->dev.platform_data;
 
 	free_irq(ucb->irq, ucb);
 	input_unregister_device(ucb->ts_idev);
-	dev_set_drvdata(dev, NULL);
-	kfree(ucb);
 	return 0;
 }
 
-static struct device_driver ucb1400_ts_driver = {
-	.name		= "ucb1400_ts",
-	.owner		= THIS_MODULE,
-	.bus		= &ac97_bus_type,
-	.probe		= ucb1400_ts_probe,
-	.remove		= ucb1400_ts_remove,
-	.resume		= ucb1400_ts_resume,
+#ifdef CONFIG_PM
+static int ucb1400_ts_resume(struct platform_device *dev)
+{
+	struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+
+	if (ucb->ts_task) {
+		/*
+		 * Restart the TS thread to ensure the
+		 * TS interrupt mode is set up again
+		 * after sleep.
+		 */
+		ucb->ts_restart = 1;
+		wake_up(&ucb->ts_wait);
+	}
+	return 0;
+}
+#else
+#define ucb1400_ts_resume NULL
+#endif
+
+static struct platform_driver ucb1400_ts_driver = {
+	.probe	= ucb1400_ts_probe,
+	.remove	= ucb1400_ts_remove,
+	.resume	= ucb1400_ts_resume,
+	.driver	= {
+		.name	= "ucb1400_ts",
+	},
 };
 
 static int __init ucb1400_ts_init(void)
 {
-	return driver_register(&ucb1400_ts_driver);
+	return platform_driver_register(&ucb1400_ts_driver);
 }
 
 static void __exit ucb1400_ts_exit(void)
 {
-	driver_unregister(&ucb1400_ts_driver);
+	platform_driver_unregister(&ucb1400_ts_driver);
 }
 
 module_param(adcsync, bool, 0444);
 MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
 
 module_param(ts_delay, int, 0444);
-MODULE_PARM_DESC(ts_delay, "Delay between panel setup and position read. Default = 55us.");
+MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
+			    " position read. Default = 55us.");
 
 module_param(ts_delay_pressure, int, 0444);
 MODULE_PARM_DESC(ts_delay_pressure,
-		  "delay between panel setup and pressure read.  Default = 0us.");
+		"delay between panel setup and pressure read."
+		"  Default = 0us.");
 
 module_init(ucb1400_ts_init);
 module_exit(ucb1400_ts_exit);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 10c44d3fe01..5dba1651f9c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -50,6 +50,15 @@ config HTC_PASIC3
 	  HTC Magician devices, respectively. Actual functionality is
 	  handled by the leds-pasic3 and ds1wm drivers.
 
+config UCB1400_CORE
+	tristate "Philips UCB1400 Core driver"
+	help
+	  This enables support for the Philips UCB1400 core functions.
+	  The UCB1400 is an AC97 audio codec.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ucb1400_core.
+
 config MFD_TMIO
 	bool
 	default n
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 03ad239ecef..6abebe36441 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_MCP_UCB1200_TS)	+= ucb1x00-ts.o
 ifeq ($(CONFIG_SA1100_ASSABET),y)
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
 endif
+obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
new file mode 100644
index 00000000000..178159e264c
--- /dev/null
+++ b/drivers/mfd/ucb1400_core.c
@@ -0,0 +1,106 @@
+/*
+ * Core functions for:
+ *  Philips UCB1400 multifunction chip
+ *
+ * Based on ucb1400_ts.c:
+ *  Author:	Nicolas Pitre
+ *  Created:	September 25, 2006
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300..  Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#include <linux/module.h>
+#include <linux/ucb1400.h>
+
+static int ucb1400_core_probe(struct device *dev)
+{
+	int err;
+	struct ucb1400 *ucb;
+	struct ucb1400_ts ucb_ts;
+	struct snd_ac97 *ac97;
+
+	memset(&ucb_ts, 0, sizeof(ucb_ts));
+
+	ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
+	if (!ucb) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	dev_set_drvdata(dev, ucb);
+
+	ac97 = to_ac97_t(dev);
+
+	ucb_ts.id = ucb1400_reg_read(ac97, UCB_ID);
+	if (ucb_ts.id != UCB_ID_1400) {
+		err = -ENODEV;
+		goto err0;
+	}
+
+	/* TOUCHSCREEN */
+	ucb_ts.ac97 = ac97;
+	ucb->ucb1400_ts = platform_device_alloc("ucb1400_ts", -1);
+	if (!ucb->ucb1400_ts) {
+		err = -ENOMEM;
+		goto err0;
+	}
+	err = platform_device_add_data(ucb->ucb1400_ts, &ucb_ts,
+					sizeof(ucb_ts));
+	if (err)
+		goto err1;
+	err = platform_device_add(ucb->ucb1400_ts);
+	if (err)
+		goto err1;
+
+	return 0;
+
+err1:
+	platform_device_put(ucb->ucb1400_ts);
+err0:
+	kfree(ucb);
+err:
+	return err;
+}
+
+static int ucb1400_core_remove(struct device *dev)
+{
+	struct ucb1400 *ucb = dev_get_drvdata(dev);
+
+	platform_device_unregister(ucb->ucb1400_ts);
+	kfree(ucb);
+	return 0;
+}
+
+static struct device_driver ucb1400_core_driver = {
+	.name	= "ucb1400_core",
+	.bus	= &ac97_bus_type,
+	.probe	= ucb1400_core_probe,
+	.remove	= ucb1400_core_remove,
+};
+
+static int __init ucb1400_core_init(void)
+{
+	return driver_register(&ucb1400_core_driver);
+}
+
+static void __exit ucb1400_core_exit(void)
+{
+	driver_unregister(&ucb1400_core_driver);
+}
+
+module_init(ucb1400_core_init);
+module_exit(ucb1400_core_exit);
+
+MODULE_DESCRIPTION("Philips UCB1400 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 20c5b06790a..679ca927a62 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -73,5 +73,6 @@ pxa2xx_cs-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx_cs-$(CONFIG_PXA_SHARPSL)			+= pxa2xx_sharpsl.o
 pxa2xx_cs-$(CONFIG_MACH_ARMCORE)		+= pxa2xx_cm_x2xx.o pxa2xx_cm_x255.o pxa2xx_cm_x270.o
 pxa2xx_cs-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps.o
-pxa2xx_cs-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
+pxa2xx_cs-$(CONFIG_MACH_PALMTX)			+= pxa2xx_palmtx.o
+pxa2xx_cs-$(CONFIG_MACH_PALMLD)			+= pxa2xx_palmld.o
 
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
new file mode 100644
index 00000000000..1736c67e547
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -0,0 +1,151 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmld.c
+ *
+ * Driver for Palm LifeDrive PCMCIA
+ *
+ * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/palmld.h>
+#include "soc_common.h"
+
+static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1);
+	if (ret)
+		goto err3;
+
+	ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY");
+	if (ret)
+		goto err3;
+	ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY);
+	if (ret)
+		goto err4;
+
+	skt->irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
+	return 0;
+
+err4:
+	gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
+err3:
+	gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
+err2:
+	gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+err1:
+	return ret;
+}
+
+static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
+	gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
+	gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+}
+
+static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->detect = 1; /* always inserted */
+	state->ready  = !!gpio_get_value(GPIO_NR_PALMLD_PCMCIA_READY);
+	state->bvd1   = 1;
+	state->bvd2   = 1;
+	state->wrprot = 0;
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					const socket_state_t *state)
+{
+	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
+	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
+			!!(state->flags & SS_RESET));
+
+	return 0;
+}
+
+static void palmld_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmld_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level palmld_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 2,
+
+	.hw_init		= palmld_pcmcia_hw_init,
+	.hw_shutdown		= palmld_pcmcia_hw_shutdown,
+
+	.socket_state		= palmld_pcmcia_socket_state,
+	.configure_socket	= palmld_pcmcia_configure_socket,
+
+	.socket_init		= palmld_pcmcia_socket_init,
+	.socket_suspend		= palmld_pcmcia_socket_suspend,
+};
+
+static struct platform_device *palmld_pcmcia_device;
+
+static int __init palmld_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_palmld())
+		return -ENODEV;
+
+	palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!palmld_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops,
+					sizeof(palmld_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(palmld_pcmcia_device);
+
+	if (ret)
+		platform_device_put(palmld_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit palmld_pcmcia_exit(void)
+{
+	platform_device_unregister(palmld_pcmcia_device);
+}
+
+module_init(palmld_pcmcia_init);
+module_exit(palmld_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+	    " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9ce55850271..1982f8b4278 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -56,10 +56,10 @@ config BATTERY_TOSA
 	  Say Y to enable support for the battery on the Sharp Zaurus
 	  SL-6000 (tosa) models.
 
-config BATTERY_PALMTX
-	tristate "Palm T|X battery"
-	depends on MACH_PALMTX
+config BATTERY_WM97XX
+	bool "WM97xx generic battery driver"
+	depends on TOUCHSCREEN_WM97XX
 	help
-	  Say Y to enable support for the battery in Palm T|X.
+	  Say Y to enable support for battery measured by WM97xx aux port.
 
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 4706bf8ff45..4e20026cc45 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -21,4 +21,4 @@ obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
-obj-$(CONFIG_BATTERY_PALMTX)	+= palmtx_battery.o
+obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
\ No newline at end of file
diff --git a/drivers/power/palmtx_battery.c b/drivers/power/palmtx_battery.c
deleted file mode 100644
index 7035bfa41c6..00000000000
--- a/drivers/power/palmtx_battery.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * linux/drivers/power/palmtx_battery.c
- *
- * Battery measurement code for Palm T|X Handheld computer
- *
- * based on tosa_battery.c
- *
- * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmtx.h>
-
-static DEFINE_MUTEX(bat_lock);
-static struct work_struct bat_work;
-struct mutex work_lock;
-int bat_status = POWER_SUPPLY_STATUS_DISCHARGING;
-
-static unsigned long palmtx_read_bat(struct power_supply *bat_ps)
-{
-	return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
-				    WM97XX_AUX_ID3) * 1000 / 414;
-}
-
-static unsigned long palmtx_read_temp(struct power_supply *bat_ps)
-{
-	return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
-				    WM97XX_AUX_ID2);
-}
-
-static int palmtx_bat_get_property(struct power_supply *bat_ps,
-			    enum power_supply_property psp,
-			    union power_supply_propval *val)
-{
-	switch (psp) {
-	case POWER_SUPPLY_PROP_STATUS:
-		val->intval = bat_status;
-		break;
-	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
-		break;
-	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		val->intval = palmtx_read_bat(bat_ps);
-		break;
-	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
-	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-		val->intval = PALMTX_BAT_MAX_VOLTAGE;
-		break;
-	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-		val->intval = PALMTX_BAT_MIN_VOLTAGE;
-		break;
-	case POWER_SUPPLY_PROP_TEMP:
-		val->intval = palmtx_read_temp(bat_ps);
-		break;
-	case POWER_SUPPLY_PROP_PRESENT:
-		val->intval = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static void palmtx_bat_external_power_changed(struct power_supply *bat_ps)
-{
-	schedule_work(&bat_work);
-}
-
-static char *status_text[] = {
-	[POWER_SUPPLY_STATUS_UNKNOWN] =		"Unknown",
-	[POWER_SUPPLY_STATUS_CHARGING] =	"Charging",
-	[POWER_SUPPLY_STATUS_DISCHARGING] =	"Discharging",
-};
-
-static void palmtx_bat_update(struct power_supply *bat_ps)
-{
-	int old_status = bat_status;
-
-	mutex_lock(&work_lock);
-
-	bat_status = gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT) ?
-				    POWER_SUPPLY_STATUS_CHARGING :
-				    POWER_SUPPLY_STATUS_DISCHARGING;
-
-	if (old_status != bat_status) {
-		pr_debug("%s %s -> %s\n", bat_ps->name,
-				status_text[old_status],
-				status_text[bat_status]);
-		power_supply_changed(bat_ps);
-	}
-
-	mutex_unlock(&work_lock);
-}
-
-static enum power_supply_property palmtx_bat_main_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_TECHNOLOGY,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_VOLTAGE_MAX,
-	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-	POWER_SUPPLY_PROP_TEMP,
-	POWER_SUPPLY_PROP_PRESENT,
-};
-
-struct power_supply bat_ps = {
-	.name			= "main-battery",
-	.type			= POWER_SUPPLY_TYPE_BATTERY,
-	.properties		= palmtx_bat_main_props,
-	.num_properties		= ARRAY_SIZE(palmtx_bat_main_props),
-	.get_property		= palmtx_bat_get_property,
-	.external_power_changed = palmtx_bat_external_power_changed,
-	.use_for_apm		= 1,
-};
-
-static void palmtx_bat_work(struct work_struct *work)
-{
-	palmtx_bat_update(&bat_ps);
-}
-
-#ifdef CONFIG_PM
-static int palmtx_bat_suspend(struct platform_device *dev, pm_message_t state)
-{
-	flush_scheduled_work();
-	return 0;
-}
-
-static int palmtx_bat_resume(struct platform_device *dev)
-{
-	schedule_work(&bat_work);
-	return 0;
-}
-#else
-#define palmtx_bat_suspend NULL
-#define palmtx_bat_resume NULL
-#endif
-
-static int __devinit palmtx_bat_probe(struct platform_device *dev)
-{
-	int ret = 0;
-
-	if (!machine_is_palmtx())
-		return -ENODEV;
-
-	mutex_init(&work_lock);
-
-	INIT_WORK(&bat_work, palmtx_bat_work);
-
-	ret = power_supply_register(&dev->dev, &bat_ps);
-	if (!ret)
-		schedule_work(&bat_work);
-
-	return ret;
-}
-
-static int __devexit palmtx_bat_remove(struct platform_device *dev)
-{
-	power_supply_unregister(&bat_ps);
-	return 0;
-}
-
-static struct platform_driver palmtx_bat_driver = {
-	.driver.name	= "wm97xx-battery",
-	.driver.owner	= THIS_MODULE,
-	.probe		= palmtx_bat_probe,
-	.remove		= __devexit_p(palmtx_bat_remove),
-	.suspend	= palmtx_bat_suspend,
-	.resume		= palmtx_bat_resume,
-};
-
-static int __init palmtx_bat_init(void)
-{
-	return platform_driver_register(&palmtx_bat_driver);
-}
-
-static void __exit palmtx_bat_exit(void)
-{
-	platform_driver_unregister(&palmtx_bat_driver);
-}
-
-module_init(palmtx_bat_init);
-module_exit(palmtx_bat_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("Palm T|X battery driver");
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
new file mode 100644
index 00000000000..8bde92126d3
--- /dev/null
+++ b/drivers/power/wm97xx_battery.c
@@ -0,0 +1,272 @@
+/*
+ * linux/drivers/power/wm97xx_battery.c
+ *
+ * Battery measurement code for WM97xx
+ *
+ * based on tosa_battery.c
+ *
+ * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+
+static DEFINE_MUTEX(bat_lock);
+static struct work_struct bat_work;
+struct mutex work_lock;
+static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
+static struct wm97xx_batt_info *pdata;
+static enum power_supply_property *prop;
+
+static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
+{
+	return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+					pdata->batt_aux) * pdata->batt_mult /
+					pdata->batt_div;
+}
+
+static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
+{
+	return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+					pdata->temp_aux) * pdata->temp_mult /
+					pdata->temp_div;
+}
+
+static int wm97xx_bat_get_property(struct power_supply *bat_ps,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat_status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = pdata->batt_tech;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (pdata->batt_aux >= 0)
+			val->intval = wm97xx_read_bat(bat_ps);
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (pdata->temp_aux >= 0)
+			val->intval = wm97xx_read_temp(bat_ps);
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (pdata->max_voltage >= 0)
+			val->intval = pdata->max_voltage;
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		if (pdata->min_voltage >= 0)
+			val->intval = pdata->min_voltage;
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps)
+{
+	schedule_work(&bat_work);
+}
+
+static void wm97xx_bat_update(struct power_supply *bat_ps)
+{
+	int old_status = bat_status;
+
+	mutex_lock(&work_lock);
+
+	bat_status = (pdata->charge_gpio >= 0) ?
+			(gpio_get_value(pdata->charge_gpio) ?
+			POWER_SUPPLY_STATUS_DISCHARGING :
+			POWER_SUPPLY_STATUS_CHARGING) :
+			POWER_SUPPLY_STATUS_UNKNOWN;
+
+	if (old_status != bat_status) {
+		pr_debug("%s: %i -> %i\n", bat_ps->name, old_status,
+					bat_status);
+		power_supply_changed(bat_ps);
+	}
+
+	mutex_unlock(&work_lock);
+}
+
+static struct power_supply bat_ps = {
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property		= wm97xx_bat_get_property,
+	.external_power_changed = wm97xx_bat_external_power_changed,
+	.use_for_apm		= 1,
+};
+
+static void wm97xx_bat_work(struct work_struct *work)
+{
+	wm97xx_bat_update(&bat_ps);
+}
+
+#ifdef CONFIG_PM
+static int wm97xx_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+	flush_scheduled_work();
+	return 0;
+}
+
+static int wm97xx_bat_resume(struct platform_device *dev)
+{
+	schedule_work(&bat_work);
+	return 0;
+}
+#else
+#define wm97xx_bat_suspend NULL
+#define wm97xx_bat_resume NULL
+#endif
+
+static int __devinit wm97xx_bat_probe(struct platform_device *dev)
+{
+	int ret = 0;
+	int props = 1;	/* POWER_SUPPLY_PROP_PRESENT */
+	int i = 0;
+
+	if (dev->id != -1)
+		return -EINVAL;
+
+	mutex_init(&work_lock);
+
+	if (!pdata) {
+		dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->charge_gpio >= 0 && gpio_is_valid(pdata->charge_gpio)) {
+		ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
+		if (ret)
+			goto err;
+		ret = gpio_direction_input(pdata->charge_gpio);
+		if (ret)
+			goto err2;
+		props++;	/* POWER_SUPPLY_PROP_STATUS */
+	}
+
+	if (pdata->batt_tech >= 0)
+		props++;	/* POWER_SUPPLY_PROP_TECHNOLOGY */
+	if (pdata->temp_aux >= 0)
+		props++;	/* POWER_SUPPLY_PROP_TEMP */
+	if (pdata->batt_aux >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_NOW */
+	if (pdata->max_voltage >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MAX */
+	if (pdata->min_voltage >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MIN */
+
+	prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
+	if (!prop)
+		goto err2;
+
+	prop[i++] = POWER_SUPPLY_PROP_PRESENT;
+	if (pdata->charge_gpio >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_STATUS;
+	if (pdata->batt_tech >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
+	if (pdata->temp_aux >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_TEMP;
+	if (pdata->batt_aux >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+	if (pdata->max_voltage >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+	if (pdata->min_voltage >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+
+	INIT_WORK(&bat_work, wm97xx_bat_work);
+
+	if (!pdata->batt_name) {
+		dev_info(&dev->dev, "Please consider setting proper battery "
+				"name in platform definition file, falling "
+				"back to name \"wm97xx-batt\"\n");
+		bat_ps.name = "wm97xx-batt";
+	} else
+		bat_ps.name = pdata->batt_name;
+
+	bat_ps.properties = prop;
+	bat_ps.num_properties = props;
+
+	ret = power_supply_register(&dev->dev, &bat_ps);
+	if (!ret)
+		schedule_work(&bat_work);
+	else
+		goto err3;
+
+	return 0;
+err3:
+	kfree(prop);
+err2:
+	gpio_free(pdata->charge_gpio);
+err:
+	return ret;
+}
+
+static int __devexit wm97xx_bat_remove(struct platform_device *dev)
+{
+	if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0)
+		gpio_free(pdata->charge_gpio);
+	flush_scheduled_work();
+	power_supply_unregister(&bat_ps);
+	kfree(prop);
+	return 0;
+}
+
+static struct platform_driver wm97xx_bat_driver = {
+	.driver	= {
+		.name	= "wm97xx-battery",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm97xx_bat_probe,
+	.remove		= __devexit_p(wm97xx_bat_remove),
+	.suspend	= wm97xx_bat_suspend,
+	.resume		= wm97xx_bat_resume,
+};
+
+static int __init wm97xx_bat_init(void)
+{
+	return platform_driver_register(&wm97xx_bat_driver);
+}
+
+static void __exit wm97xx_bat_exit(void)
+{
+	platform_driver_unregister(&wm97xx_bat_driver);
+}
+
+void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
+{
+	pdata = data;
+}
+EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
+
+module_init(wm97xx_bat_init);
+module_exit(wm97xx_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("WM97xx battery driver");
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
new file mode 100644
index 00000000000..970473bf8d5
--- /dev/null
+++ b/include/linux/ucb1400.h
@@ -0,0 +1,161 @@
+/*
+ * Register definitions and functions for:
+ *  Philips UCB1400 driver
+ *
+ * Based on ucb1400_ts:
+ *  Author:	Nicolas Pitre
+ *  Created:	September 25, 2006
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300..  Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#ifndef _LINUX__UCB1400_H
+#define _LINUX__UCB1400_H
+
+#include <sound/ac97_codec.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+/*
+ * UCB1400 AC-link registers
+ */
+
+#define UCB_IO_DATA		0x5a
+#define UCB_IO_DIR		0x5c
+#define UCB_IE_RIS		0x5e
+#define UCB_IE_FAL		0x60
+#define UCB_IE_STATUS		0x62
+#define UCB_IE_CLEAR		0x62
+#define UCB_IE_ADC		(1 << 11)
+#define UCB_IE_TSPX		(1 << 12)
+
+#define UCB_TS_CR		0x64
+#define UCB_TS_CR_TSMX_POW	(1 << 0)
+#define UCB_TS_CR_TSPX_POW	(1 << 1)
+#define UCB_TS_CR_TSMY_POW	(1 << 2)
+#define UCB_TS_CR_TSPY_POW	(1 << 3)
+#define UCB_TS_CR_TSMX_GND	(1 << 4)
+#define UCB_TS_CR_TSPX_GND	(1 << 5)
+#define UCB_TS_CR_TSMY_GND	(1 << 6)
+#define UCB_TS_CR_TSPY_GND	(1 << 7)
+#define UCB_TS_CR_MODE_INT	(0 << 8)
+#define UCB_TS_CR_MODE_PRES	(1 << 8)
+#define UCB_TS_CR_MODE_POS	(2 << 8)
+#define UCB_TS_CR_BIAS_ENA	(1 << 11)
+#define UCB_TS_CR_TSPX_LOW	(1 << 12)
+#define UCB_TS_CR_TSMX_LOW	(1 << 13)
+
+#define UCB_ADC_CR		0x66
+#define UCB_ADC_SYNC_ENA	(1 << 0)
+#define UCB_ADC_VREFBYP_CON	(1 << 1)
+#define UCB_ADC_INP_TSPX	(0 << 2)
+#define UCB_ADC_INP_TSMX	(1 << 2)
+#define UCB_ADC_INP_TSPY	(2 << 2)
+#define UCB_ADC_INP_TSMY	(3 << 2)
+#define UCB_ADC_INP_AD0		(4 << 2)
+#define UCB_ADC_INP_AD1		(5 << 2)
+#define UCB_ADC_INP_AD2		(6 << 2)
+#define UCB_ADC_INP_AD3		(7 << 2)
+#define UCB_ADC_EXT_REF		(1 << 5)
+#define UCB_ADC_START		(1 << 7)
+#define UCB_ADC_ENA		(1 << 15)
+
+#define UCB_ADC_DATA		0x68
+#define UCB_ADC_DAT_VALID	(1 << 15)
+#define UCB_ADC_DAT_MASK	0x3ff
+
+#define UCB_ID			0x7e
+#define UCB_ID_1400             0x4304
+
+struct ucb1400_ts {
+	struct input_dev	*ts_idev;
+	struct task_struct	*ts_task;
+	int			id;
+	wait_queue_head_t	ts_wait;
+	unsigned int		ts_restart:1;
+	int			irq;
+	unsigned int		irq_pending;	/* not bit field shared */
+	struct snd_ac97		*ac97;
+};
+
+struct ucb1400 {
+	struct platform_device	*ucb1400_ts;
+};
+
+static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
+{
+	return ac97->bus->ops->read(ac97, reg);
+}
+
+static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val)
+{
+	ac97->bus->ops->write(ac97, reg, val);
+}
+
+static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio)
+{
+	return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio);
+}
+
+static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio,
+						u16 val)
+{
+	ucb1400_reg_write(ac97, UCB_IO_DATA, val ?
+			ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) :
+			ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio));
+}
+
+static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio)
+{
+	return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio);
+}
+
+static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio,
+						u16 dir)
+{
+	ucb1400_reg_write(ac97, UCB_IO_DIR, dir ?
+			ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) :
+			ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio));
+}
+
+static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
+{
+	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
+}
+
+static unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
+					int adcsync)
+{
+	unsigned int val;
+
+	if (adcsync)
+		adc_channel |= UCB_ADC_SYNC_ENA;
+
+	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
+	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel |
+				UCB_ADC_START);
+
+	while (!((val = ucb1400_reg_read(ac97, UCB_ADC_DATA))
+			& UCB_ADC_DAT_VALID))
+		schedule_timeout_uninterruptible(1);
+
+	return val & UCB_ADC_DAT_MASK;
+}
+
+static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
+{
+	ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
+}
+
+#endif
diff --git a/include/linux/wm97xx_batt.h b/include/linux/wm97xx_batt.h
new file mode 100644
index 00000000000..9681d1ab0e4
--- /dev/null
+++ b/include/linux/wm97xx_batt.h
@@ -0,0 +1,26 @@
+#ifndef _LINUX_WM97XX_BAT_H
+#define _LINUX_WM97XX_BAT_H
+
+#include <linux/wm97xx.h>
+
+struct wm97xx_batt_info {
+	int	batt_aux;
+	int	temp_aux;
+	int	charge_gpio;
+	int	min_voltage;
+	int	max_voltage;
+	int	batt_div;
+	int	batt_mult;
+	int	temp_div;
+	int	temp_mult;
+	int	batt_tech;
+	char	*batt_name;
+};
+
+#ifdef CONFIG_BATTERY_WM97XX
+void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
+#else
+static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
+#endif
+
+#endif