drm/i915: (re)init HPD interrupt storm statistics

When an encoder is shared on several connectors there is only
one hotplug line, thus this line needs to be shared among these
connectors.
If HPD detect only works reliably on a subset of those connectors,
we want to poll the others. Thus we need to make sure that storm
detection doesn't mess up the settings for those connectors.
Therefore we store the settings in the intel_connector struct and
restore them from there.
If nothing is set but the encoder has a hpd_pin set we assume this
connector is hotplug capable.
On init/reset we make sure the polled state of the connectors
is (re)set to the default value, the HPD interrupts are marked
enabled.

Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

7 files changed, 23 insertions, 10 deletions

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 5ac1291c585..2b4967014dc 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -596,6 +596,7 @@ static inline void hotplug_irq_storm_detect(struct drm_device *dev,
 	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
 
 	for (i = 1; i < HPD_NUM_PINS; i++) {
+
 		if (!(hpd[i] & hotplug_trigger) ||
 		    dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED)
 			continue;
@@ -3062,7 +3063,20 @@ void intel_irq_init(struct drm_device *dev)
 void intel_hpd_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+	int i;
 
+	for (i = 1; i < HPD_NUM_PINS; i++) {
+		dev_priv->hpd_stats[i].hpd_cnt = 0;
+		dev_priv->hpd_stats[i].hpd_mark = HPD_ENABLED;
+	}
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		struct intel_connector *intel_connector = to_intel_connector(connector);
+		connector->polled = intel_connector->polled;
+		if (!connector->polled && I915_HAS_HOTPLUG(dev) && intel_connector->encoder->hpd_pin > HPD_NONE)
+			connector->polled = DRM_CONNECTOR_POLL_HPD;
+	}
 	if (dev_priv->display.hpd_irq_setup)
 		dev_priv->display.hpd_irq_setup(dev);
 }
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 1ae2d7f39c6..c063b9f0dd5 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -793,10 +793,8 @@ void intel_crt_init(struct drm_device *dev)
 
 	drm_sysfs_connector_add(connector);
 
-	if (I915_HAS_HOTPLUG(dev))
-		connector->polled = DRM_CONNECTOR_POLL_HPD;
-	else
-		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+	if (!I915_HAS_HOTPLUG(dev))
+		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
 	/*
 	 * Configure the automatic hotplug detection stuff
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8845e82ec9e..89f89b72790 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2787,7 +2787,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
 	drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
 
-	connector->polled = DRM_CONNECTOR_POLL_HPD;
 	connector->interlace_allowed = true;
 	connector->doublescan_allowed = 0;
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index a124e05fb58..7b97b9a1523 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -171,6 +171,10 @@ struct intel_connector {
 
 	/* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */
 	struct edid *edid;
+
+	/* since POLL and HPD connectors may use the same HPD line keep the native
+	   state of connector->polled in case hotplug storm detection changes it */
+	u8 polled;
 };
 
 struct intel_crtc_config {
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index ee4a8da8311..89122011720 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -998,7 +998,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 			   DRM_MODE_CONNECTOR_HDMIA);
 	drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
 
-	connector->polled = DRM_CONNECTOR_POLL_HPD;
 	connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index f6a9f4a0d7f..a618a6a45a7 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2274,7 +2274,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 	connector = &intel_connector->base;
 	if (intel_sdvo_get_hotplug_support(intel_sdvo) &
 		intel_sdvo_connector->output_flag) {
-		connector->polled = DRM_CONNECTOR_POLL_HPD;
 		intel_sdvo->hotplug_active |= intel_sdvo_connector->output_flag;
 		/* Some SDVO devices have one-shot hotplug interrupts.
 		 * Ensure that they get re-enabled when an interrupt happens.
@@ -2282,7 +2281,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 		intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
 		intel_sdvo_enable_hotplug(intel_encoder);
 	} else {
-		connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
 	}
 	encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
 	connector->connector_type = DRM_MODE_CONNECTOR_DVID;
@@ -2351,7 +2350,7 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
 
 	intel_connector = &intel_sdvo_connector->base;
 	connector = &intel_connector->base;
-	connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+	intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 	encoder->encoder_type = DRM_MODE_ENCODER_DAC;
 	connector->connector_type = DRM_MODE_CONNECTOR_VGA;
 
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 66737265200..b945bc54207 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1613,7 +1613,7 @@ intel_tv_init(struct drm_device *dev)
 	 *
 	 * More recent chipsets favour HDMI rather than integrated S-Video.
 	 */
-	connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+	intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
 	drm_connector_init(dev, connector, &intel_tv_connector_funcs,
 			   DRM_MODE_CONNECTOR_SVIDEO);