diff options
author | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2011-04-23 15:28:34 +0800 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2011-07-28 15:07:28 +0000 |
commit | 92100c12ca1bc5f347ff41c1413f9db07c4d276c (patch) | |
tree | cbf4379cce962c550d32ab5dfd6d10dac7fb70db | |
parent | 21d08b9d5536ac418bbce4f419fe2b528b7ddf31 (diff) |
at91: factorize at91 interrupts init to soc
they are the same except the default priority
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
45 files changed, 61 insertions, 322 deletions
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 7ec9eeb6428..9a013704378 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -403,19 +403,8 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91cap9_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - struct at91_soc __initdata at91cap9_soc = { .map_io = at91cap9_map_io, + .default_irq_priority = at91cap9_default_irq_priority, .init = at91cap9_initialize, }; diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 489f4d90f27..d7801bed9af 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -379,19 +379,8 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91rm9200_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - struct at91_soc __initdata at91rm9200_soc = { .map_io = at91rm9200_map_io, + .default_irq_priority = at91rm9200_default_irq_priority, .init = at91rm9200_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 366c5d69393..164873fa965 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -410,19 +410,8 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9260_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - struct at91_soc __initdata at91sam9260_soc = { .map_io = at91sam9260_map_io, + .default_irq_priority = at91sam9260_default_irq_priority, .init = at91sam9260_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index a0081c081c3..7a4a673eede 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -361,19 +361,8 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9261_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - struct at91_soc __initdata at91sam9261_soc = { .map_io = at91sam9261_map_io, + .default_irq_priority = at91sam9261_default_irq_priority, .init = at91sam9261_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 49f83dffd2a..3140a13abc4 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -372,19 +372,8 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9263_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - struct at91_soc __initdata at91sam9263_soc = { .map_io = at91sam9263_map_io, + .default_irq_priority = at91sam9263_default_irq_priority, .init = at91sam9263_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 877c320fce2..f5e72da65ce 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -388,19 +388,8 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9g45_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - struct at91_soc __initdata at91sam9g45_soc = { .map_io = at91sam9g45_map_io, + .default_irq_priority = at91sam9g45_default_irq_priority, .init = at91sam9g45_initialize, }; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 8ff7720b3e4..9c87bacd10f 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -359,19 +359,8 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9rl_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - struct at91_soc __initdata at91sam9rl_soc = { .map_io = at91sam9rl_map_io, + .default_irq_priority = at91sam9rl_default_irq_priority, .init = at91sam9rl_initialize, }; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index e588a9e15e7..5aa58851eb3 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -63,11 +63,6 @@ static void __init onearm_init_early(void) at91_set_serial_console(0); } -static void __init onearm_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -99,6 +94,6 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = onearm_init_early, - .init_irq = onearm_init_irq, + .init_irq = at91_init_irq_default, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 7cd1cb2f010..b0c796d42e4 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -70,12 +70,6 @@ static void __init afeb9260_init_early(void) at91_set_serial_console(0); } -static void __init afeb9260_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -221,7 +215,7 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = afeb9260_init_early, - .init_irq = afeb9260_init_irq, + .init_irq = at91_init_irq_default, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index bdc52e641e6..d1abd5898e8 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -57,12 +57,6 @@ static void __init cam60_init_early(void) at91_set_serial_console(0); } -static void __init cam60_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host */ @@ -201,6 +195,6 @@ MACHINE_START(CAM60, "KwikByte CAM60") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = cam60_init_early, - .init_irq = cam60_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index d04a6a0f3dd..679b0b743e9 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -65,12 +65,6 @@ static void __init cap9adk_init_early(void) at91_set_serial_console(0); } -static void __init cap9adk_init_irq(void) -{ - at91cap9_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -399,6 +393,6 @@ MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = cap9adk_init_early, - .init_irq = cap9adk_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 0a92b7a7c21..c578c5d9072 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -57,11 +57,6 @@ static void __init carmeva_init_early(void) at91_set_serial_console(0); } -static void __init carmeva_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata carmeva_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -165,6 +160,6 @@ MACHINE_START(CARMEVA, "Carmeva") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = carmeva_init_early, - .init_irq = carmeva_init_irq, + .init_irq = at91_init_irq_default, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 01128f9a059..f4da8a16d5d 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -81,11 +81,6 @@ static void __init cpu9krea_init_early(void) at91_set_serial_console(0); } -static void __init cpu9krea_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* * USB Host port */ @@ -378,6 +373,6 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = cpu9krea_init_early, - .init_irq = cpu9krea_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 0692606b9fe..2d919f5a4f5 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -82,11 +82,6 @@ static void __init cpuat91_init_early(void) at91_set_serial_console(0); } -static void __init cpuat91_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata cpuat91_eth_data = { .is_rmii = 1, }; @@ -182,6 +177,6 @@ MACHINE_START(CPUAT91, "Eukrea") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = cpuat91_init_early, - .init_irq = cpuat91_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 923cccb7948..17654d5e94e 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -58,11 +58,6 @@ static void __init csb337_init_early(void) at91_set_serial_console(0); } -static void __init csb337_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, @@ -260,6 +255,6 @@ MACHINE_START(CSB337, "Cogent CSB337") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = csb337_init_early, - .init_irq = csb337_init_irq, + .init_irq = at91_init_irq_default, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 51131cad1ab..72b55674616 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -52,11 +52,6 @@ static void __init csb637_init_early(void) at91_set_serial_console(0); } -static void __init csb637_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata csb637_eth_data = { .phy_irq_pin = AT91_PIN_PC0, .is_rmii = 0, @@ -141,6 +136,6 @@ MACHINE_START(CSB637, "Cogent CSB637") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = csb637_init_early, - .init_irq = csb637_init_irq, + .init_irq = at91_init_irq_default, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 705071cbd23..01170a2766a 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -60,11 +60,6 @@ static void __init eb9200_init_early(void) at91_set_serial_console(0); } -static void __init eb9200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata eb9200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -123,6 +118,6 @@ MACHINE_START(ATEB9200, "Embest ATEB9200") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = eb9200_init_early, - .init_irq = eb9200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index a9f106a2bd2..7c0313c51f2 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -64,11 +64,6 @@ static void __init ecb_at91init_early(void) at91_set_serial_console(0); } -static void __init ecb_at91init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata ecb_at91eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, @@ -175,6 +170,6 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = ecb_at91init_early, - .init_irq = ecb_at91init_irq, + .init_irq = at91_init_irq_default, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 8639fbde966..8252c722607 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -47,11 +47,6 @@ static void __init eco920_init_early(void) at91_set_serial_console(0); } -static void __init eco920_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata eco920_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 1, @@ -137,6 +132,6 @@ MACHINE_START(ECO920, "eco920") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = eco920_init_early, - .init_irq = eco920_init_irq, + .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index f45583ed5a6..4c3f65d9c59 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -49,11 +49,6 @@ static void __init flexibity_init_early(void) at91_set_serial_console(0); } -static void __init flexibity_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* USB Host port */ static struct at91_usbh_data __initdata flexibity_usbh_data = { .ports = 2, @@ -157,6 +152,6 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = flexibity_init_early, - .init_irq = flexibity_init_irq, + .init_irq = at91_init_irq_default, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index b78442b2136..f27d1a780cf 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -101,12 +101,6 @@ static void __init foxg20_init_early(void) } -static void __init foxg20_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -269,6 +263,6 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = foxg20_init_early, - .init_irq = foxg20_init_irq, + .init_irq = at91_init_irq_default, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 6588143461f..2e95949737e 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -75,11 +75,6 @@ static void __init gsia18s_init_early(void) at91_register_uart(AT91SAM9260_ID_US4, 5, 0); } -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* * Two USB Host ports */ @@ -579,6 +574,6 @@ MACHINE_START(GSIA18S, "GS_IA18_S") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = gsia18s_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index d26b960cf9c..4a170890b3b 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -61,11 +61,6 @@ static void __init kafa_init_early(void) at91_set_serial_console(0); } -static void __init kafa_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata kafa_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, @@ -101,6 +96,6 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = kafa_init_early, - .init_irq = kafa_init_irq, + .init_irq = at91_init_irq_default, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a4d81530242..9dc8d496ead 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -69,11 +69,6 @@ static void __init kb9202_init_early(void) at91_set_serial_console(0); } -static void __init kb9202_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata kb9202_eth_data = { .phy_irq_pin = AT91_PIN_PB29, .is_rmii = 0, @@ -142,6 +137,6 @@ MACHINE_START(KB9200, "KB920x") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = kb9202_init_early, - .init_irq = kb9202_init_irq, + .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 26a4c631baf..9bc6ab32e0a 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -66,12 +66,6 @@ static void __init neocore926_init_early(void) at91_set_serial_console(0); } -static void __init neocore926_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -390,6 +384,6 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = neocore926_init_early, - .init_irq = neocore926_init_irq, + .init_irq = at91_init_irq_default, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 7651e7f9365..49e3f699b48 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -53,13 +53,6 @@ static void __init pcontrol_g20_init_early(void) at91_register_uart(AT91SAM9260_ID_US4, 3, 0); } - -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .ncs_read_setup = 16, .nrd_setup = 18, @@ -225,6 +218,6 @@ MACHINE_START(PCONTROL_G20, "PControl G20") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = pcontrol_g20_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index c7294f88abe..b7b8390e8a0 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -60,11 +60,6 @@ static void __init picotux200_init_early(void) at91_set_serial_console(0); } -static void __init picotux200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata picotux200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -126,6 +121,6 @@ MACHINE_START(PICOTUX2XX, "picotux 200") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = picotux200_init_early, - .init_irq = picotux200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 68e31a905c3..81f91103368 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -72,12 +72,6 @@ static void __init ek_init_early(void) } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -271,6 +265,6 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 97c6f211b11..6f08faadb47 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -65,11 +65,6 @@ static void __init dk_init_early(void) at91_set_serial_console(0); } -static void __init dk_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -230,6 +225,6 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = dk_init_early, - .init_irq = dk_init_irq, + .init_irq = at91_init_irq_default, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 72aa8bfbfc5..85bcccd7b9e 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -65,11 +65,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -196,6 +191,6 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 93c36bd95fd..4d3a02f1289 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -67,12 +67,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -215,6 +209,6 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 044a40cdb22..8a50c3e6718 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -70,12 +70,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -356,6 +350,6 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index d8e0aa08009..5096a0ec50c 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -69,12 +69,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9261_init_interrupts(NULL); -} - - /* * DM9000 ethernet device */ @@ -623,6 +617,6 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index d72a30cba36..ea8f185d3b9 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -68,12 +68,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -454,6 +448,6 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 98e026ad8b7..817f59d7251 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -81,12 +81,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -406,7 +400,7 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END @@ -415,6 +409,6 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 2df5d4140b1..ad234ccbf57 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -63,12 +63,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9g45_init_interrupts(NULL); -} - - /* * USB HS Host port (common to OHCI & EHCI) */ @@ -424,6 +418,6 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index defbca479c0..4f14b54b93a 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -53,12 +53,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9rl_init_interrupts(NULL); -} - - /* * USB HS Device port */ @@ -332,6 +326,6 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index c600b1491e4..25cd3ffce1e 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -55,11 +55,6 @@ static void __init snapper9260_init_early(void) at91_register_uart(AT91SAM9260_ID_US2, 3, 0); } -static void __init snapper9260_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - static struct at91_usbh_data __initdata snapper9260_usbh_data = { .ports = 2, }; @@ -181,7 +176,7 @@ MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = snapper9260_init_early, - .init_irq = snapper9260_init_irq, + .init_irq = at91_init_irq_default, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index e65efdaf9c4..936e5fd7f40 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -76,12 +76,6 @@ static void __init portuxg20_init_early(void) at91_register_uart(AT91SAM9260_ID_US5, 6, 0); } -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * NAND flash */ @@ -301,7 +295,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = portuxg20_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, MACHINE_END @@ -310,6 +304,6 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = stamp9g20evb_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index afc3b04d877..8c4c1a02c4b 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -60,12 +60,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -231,6 +225,6 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 25357e007a5..25e793782a4 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -59,12 +59,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -247,6 +241,6 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") .timer = &at91sam926x_timer, .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index e8a8ab9d4ed..95edcbd2aec 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -79,12 +79,6 @@ static void __init yl9200_init_early(void) at91_set_serial_console(0); } -static void __init yl9200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - - /* * LEDs */ @@ -601,6 +595,6 @@ MACHINE_START(YL9200, "uCdragon YL-9200") .timer = &at91rm9200_timer, .map_io = at91_map_io, .init_early = yl9200_init_early, - .init_irq = yl9200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 3e9af0df13f..ce113900258 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -19,14 +19,9 @@ extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); /* Interrupts */ -extern void __init at91rm9200_init_interrupts(unsigned int priority[]); -extern void __init at91sam9260_init_interrupts(unsigned int priority[]); -extern void __init at91sam9261_init_interrupts(unsigned int priority[]); -extern void __init at91sam9263_init_interrupts(unsigned int priority[]); -extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); -extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); +extern void __init at91_init_irq_default(void); +extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91cap9_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 096eb980521..8962d9a1a8f 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -18,6 +18,20 @@ struct at91_soc __initdata at91_boot_soc; +void __init at91_init_irq_default(void) +{ + at91_init_interrupts(at91_boot_soc.default_irq_priority); +} + +void __init at91_init_interrupts(unsigned int *priority) +{ + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} + static struct map_desc at91_io_desc __initdata = { .virtual = AT91_VA_BASE_SYS, .pfn = __phys_to_pfn(AT91_BASE_SYS), diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 6d7a18f5a48..99afa7c90d6 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -5,6 +5,7 @@ */ struct at91_soc { + unsigned int *default_irq_priority; void (*map_io)(void); void (*init)(unsigned long main_clock); }; |