diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2013-04-09 15:29:52 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2013-04-09 15:29:52 +0200 |
| commit | 92202876a3cc6b7fb0bbb52a5059e02c2c2e2186 (patch) | |
| tree | cf6968ed0327a687965dab4d2e840051bd0db721 | |
| parent | 44c0d2377539fafd1023ec7e16765b71c7f4fbce (diff) | |
| parent | e933a1a12a02f42e0013cda87bba37ccb59efc47 (diff) | |
Merge tag 'mxs-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup
From Shawn Guo <shawn.guo@linaro.org>:
The mxs cleanup for 3.10:
* Clean up timer code and move it into drivers/clocksource
* Clean up icoll code and move it into drivers/irqchip
* Clean up clock code to not include <mach/*> headers
* Clean up rtc-stmp3xxx, mxs-lradc and mxs-saif to not include <mach/*>
headers
* Clean up mach-mxs code to get it prepared for multiplatform support
* tag 'mxs-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (26 commits)
clocksource: mxs_timer: Add semicolon at end of line
ARM: mxs: remove unused headers
ARM: mxs: merge imx23 and imx28 into one machine_desc
ARM: mxs: remove common.h
ARM: mxs: move mxs_get_ocotp() into mach-mxs.c
ARM: mxs: remove mm.c
ARM: mxs: use debug_ll_io_init for low-level debug
ARM: mxs: get ocotp base address from device tree
ARM: mxs: remove system.c
ARM: mxs: get reset address from device tree
ARM: mxs: remove empty hardware.h
ASoC: mxs-saif: remove mach header inclusion
iio: mxs-lradc: remove unneeded mach header inclusion
rtc: stmp3xxx: use stmp_reset_block() instead
clk: mxs: remove the use of mach level IO accessor
clk: mxs: get base address from device tree
ARM: mxs: remove unneeded mach-types.h inclusion
ARM: mxs: move icoll driver into drivers/irqchip
ARM: mxs: call stmp_reset_block() in icoll
ARM: mxs: get icoll base address from device tree
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
26 files changed, 279 insertions, 990 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 865c25ded15..2e4386cba23 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -473,12 +473,14 @@ config ARCH_MXS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS select HAVE_CLK_PREPARE select MULTI_IRQ_HANDLER select PINCTRL select SPARSE_IRQ + select STMP_DEVICE select USE_OF help Support for Freescale MXS-based family of processors diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 56afcf41aae..ad2d79324cd 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -295,6 +295,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx23-digctl"; reg = <0x8001c000 2000>; status = "disabled"; }; @@ -321,6 +322,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -360,7 +362,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl"; + compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; @@ -426,6 +428,7 @@ compatible = "fsl,imx23-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <28 29 30 31>; + clocks = <&clks 28>; }; auart0: serial@8006c000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 7ba49662b9b..64af2381c1b 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -647,6 +647,7 @@ }; digctl@8001c000 { + compatible = "fsl,imx28-digctl"; reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; @@ -676,6 +677,7 @@ }; ocotp@8002c000 { + compatible = "fsl,ocotp"; reg = <0x8002c000 0x2000>; status = "disabled"; }; @@ -755,7 +757,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl"; + compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; @@ -838,6 +840,7 @@ compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; interrupts = <48 49 50 51>; + clocks = <&clks 26>; }; auart0: serial@8006a000 { diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 3d3c8a97306..80db7269760 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,6 +1,2 @@ -# Common support -obj-y := icoll.o ocotp.o system.o timer.o mm.o - obj-$(CONFIG_PM) += pm.o - obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h deleted file mode 100644 index be5a9c93cb2..00000000000 --- a/arch/arm/mach-mxs/include/mach/common.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_COMMON_H__ -#define __MACH_MXS_COMMON_H__ - -extern const u32 *mxs_get_ocotp(void); -extern int mxs_reset_block(void __iomem *); -extern void mxs_timer_init(void); -extern void mxs_restart(char, const char *); -extern int mxs_saif_clkmux_select(unsigned int clkmux); - -extern int mx23_clocks_init(void); -extern void mx23_map_io(void); - -extern int mx28_clocks_init(void); -extern void mx28_map_io(void); - -extern void icoll_init_irq(void); -extern void icoll_handle_irq(struct pt_regs *); - -#endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S index 90c6b7836ad..d86951551ca 100644 --- a/arch/arm/mach-mxs/include/mach/debug-macro.S +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -11,16 +11,13 @@ * */ -#include <mach/mx23.h> -#include <mach/mx28.h> - #ifdef CONFIG_DEBUG_IMX23_UART -#define UART_PADDR MX23_DUART_BASE_ADDR +#define UART_PADDR 0x80070000 #elif defined (CONFIG_DEBUG_IMX28_UART) -#define UART_PADDR MX28_DUART_BASE_ADDR +#define UART_PADDR 0x80074000 #endif -#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) +#define UART_VADDR 0xfe100000 .macro addruart, rp, rv, tmp ldr \rp, =UART_PADDR @ physical diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h deleted file mode 100644 index 17964066303..00000000000 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_DIGCTL_H__ -#define __MACH_DIGCTL_H__ - -/* MXS DIGCTL SAIF CLKMUX */ -#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 -#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 -#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 - -#define HW_DIGCTL_CTRL 0x0 -#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 -#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) -#define HW_DIGCTL_CHIPID 0x310 -#endif diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h deleted file mode 100644 index 4c0e8a64d8c..00000000000 --- a/arch/arm/mach-mxs/include/mach/hardware.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_HARDWARE_H__ -#define __MACH_MXS_HARDWARE_H__ - -#endif /* __MACH_MXS_HARDWARE_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h deleted file mode 100644 index 599094bc99d..00000000000 --- a/arch/arm/mach-mxs/include/mach/mx23.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX23_H__ -#define __MACH_MX23_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX23_OCRAM_BASE_ADDR 0x00000000 -#define MX23_OCRAM_SIZE SZ_32K - -/* - * IO - */ -#define MX23_IO_BASE_ADDR 0x80000000 -#define MX23_IO_SIZE SZ_1M - -#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000) -#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000) -#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000) -#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000) -#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000) -#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000) -#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000) -#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000) -#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000) -#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000) -#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000) -#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000) -#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000) -#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000) -#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000) -#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000) -#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000) -#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000) -#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000) -#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000) -#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000) -#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000) -#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000) -#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000) -#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000) -#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000) -#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000) -#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000) -#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000) -#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000) -#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000) -#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000) -#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000) -#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000) - -#define MX23_IO_P2V(x) MXS_IO_P2V(x) -#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x)) - -/* - * IRQ - */ -#define MX23_INT_DUART 0 -#define MX23_INT_COMMS_RX 1 -#define MX23_INT_COMMS_TX 1 -#define MX23_INT_SSP2_ERROR 2 -#define MX23_INT_VDD5V 3 -#define MX23_INT_HEADPHONE_SHORT 4 -#define MX23_INT_DAC_DMA 5 -#define MX23_INT_DAC_ERROR 6 -#define MX23_INT_ADC_DMA 7 -#define MX23_INT_ADC_ERROR 8 -#define MX23_INT_SPDIF_DMA 9 -#define MX23_INT_SAIF2_DMA 9 -#define MX23_INT_SPDIF_ERROR 10 -#define MX23_INT_SAIF1_IRQ 10 -#define MX23_INT_SAIF2_IRQ 10 -#define MX23_INT_USB_CTRL 11 -#define MX23_INT_USB_WAKEUP 12 -#define MX23_INT_GPMI_DMA 13 -#define MX23_INT_SSP1_DMA 14 -#define MX23_INT_SSP1_ERROR 15 -#define MX23_INT_GPIO0 16 -#define MX23_INT_GPIO1 17 -#define MX23_INT_GPIO2 18 -#define MX23_INT_SAIF1_DMA 19 -#define MX23_INT_SSP2_DMA 20 -#define MX23_INT_ECC8_IRQ 21 -#define MX23_INT_RTC_ALARM 22 -#define MX23_INT_AUART1_TX_DMA 23 -#define MX23_INT_AUART1 24 -#define MX23_INT_AUART1_RX_DMA 25 -#define MX23_INT_I2C_DMA 26 -#define MX23_INT_I2C_ERROR 27 -#define MX23_INT_TIMER0 28 -#define MX23_INT_TIMER1 29 -#define MX23_INT_TIMER2 30 -#define MX23_INT_TIMER3 31 -#define MX23_INT_BATT_BRNOUT 32 -#define MX23_INT_VDDD_BRNOUT 33 -#define MX23_INT_VDDIO_BRNOUT 34 -#define MX23_INT_VDD18_BRNOUT 35 -#define MX23_INT_TOUCH_DETECT 36 -#define MX23_INT_LRADC_CH0 37 -#define MX23_INT_LRADC_CH1 38 -#define MX23_INT_LRADC_CH2 39 -#define MX23_INT_LRADC_CH3 40 -#define MX23_INT_LRADC_CH4 41 -#define MX23_INT_LRADC_CH5 42 -#define MX23_INT_LRADC_CH6 43 -#define MX23_INT_LRADC_CH7 44 -#define MX23_INT_LCDIF_DMA 45 -#define MX23_INT_LCDIF_ERROR 46 -#define MX23_INT_DIGCTL_DEBUG_TRAP 47 -#define MX23_INT_RTC_1MSEC 48 -#define MX23_INT_DRI_DMA 49 -#define MX23_INT_DRI_ATTENTION 50 -#define MX23_INT_GPMI_ATTENTION 51 -#define MX23_INT_IR 52 -#define MX23_INT_DCP_VMI 53 -#define MX23_INT_DCP 54 -#define MX23_INT_BCH 56 -#define MX23_INT_PXP 57 -#define MX23_INT_AUART2_TX_DMA 58 -#define MX23_INT_AUART2 59 -#define MX23_INT_AUART2_RX_DMA 60 -#define MX23_INT_VDAC_DETECT 61 -#define MX23_INT_VDD5V_DROOP 64 -#define MX23_INT_DCDC4P2_BO 65 - -/* - * APBH DMA - */ -#define MX23_DMA_SSP1 1 -#define MX23_DMA_SSP2 2 -#define MX23_DMA_GPMI0 4 -#define MX23_DMA_GPMI1 5 -#define MX23_DMA_GPMI2 6 -#define MX23_DMA_GPMI3 7 - -/* - * APBX DMA - */ -#define MX23_DMA_ADC 0 -#define MX23_DMA_DAC 1 -#define MX23_DMA_SPDIF 2 -#define MX23_DMA_I2C 3 -#define MX23_DMA_SAIF0 4 -#define MX23_DMA_UART0_RX 6 -#define MX23_DMA_UART0_TX 7 -#define MX23_DMA_UART1_RX 8 -#define MX23_DMA_UART1_TX 9 -#define MX23_DMA_SAIF1 10 - -#endif /* __MACH_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h deleted file mode 100644 index 30c7990f3c0..00000000000 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX28_H__ -#define __MACH_MX28_H__ - -#include <mach/mxs.h> - -/* - * OCRAM - */ -#define MX28_OCRAM_BASE_ADDR 0x00000000 -#define MX28_OCRAM_SIZE SZ_128K - -/* - * IO - */ -#define MX28_IO_BASE_ADDR 0x80000000 -#define MX28_IO_SIZE SZ_1M - -#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000) -#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000) -#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000) -#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000) -#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000) -#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000) -#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000) -#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000) -#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000) -#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000) -#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000) -#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000) -#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000) -#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000) -#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000) -#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000) -#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000) -#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000) -#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000) -#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000) -#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000) -#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000) -#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200) -#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300) -#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400) -#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500) -#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700) -#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800) -#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000) -#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000) -#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000) -#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000) -#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000) -#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000) -#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000) -#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000) -#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000) -#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000) -#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000) -#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000) -#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000) -#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000) -#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000) -#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000) -#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000) -#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000) -#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000) -#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000) -#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000) -#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000) -#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000) -#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000) -#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000) - -#define MX28_IO_P2V(x) MXS_IO_P2V(x) -#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x)) - -/* - * IRQ - */ -#define MX28_INT_BATT_BRNOUT 0 -#define MX28_INT_VDDD_BRNOUT 1 -#define MX28_INT_VDDIO_BRNOUT 2 -#define MX28_INT_VDDA_BRNOUT 3 -#define MX28_INT_VDD5V_DROOP 4 -#define MX28_INT_DCDC4P2_BRNOUT 5 -#define MX28_INT_VDD5V 6 -#define MX28_INT_CAN0 8 -#define MX28_INT_CAN1 9 -#define MX28_INT_LRADC_TOUCH 10 -#define MX28_INT_HSADC 13 -#define MX28_INT_LRADC_THRESH0 14 -#define MX28_INT_LRADC_THRESH1 15 -#define MX28_INT_LRADC_CH0 16 -#define MX28_INT_LRADC_CH1 17 -#define MX28_INT_LRADC_CH2 18 -#define MX28_INT_LRADC_CH3 19 -#define MX28_INT_LRADC_CH4 20 -#define MX28_INT_LRADC_CH5 21 -#define MX28_INT_LRADC_CH6 22 -#define MX28_INT_LRADC_CH7 23 -#define MX28_INT_LRADC_BUTTON0 24 -#define MX28_INT_LRADC_BUTTON1 25 -#define MX28_INT_PERFMON 27 -#define MX28_INT_RTC_1MSEC 28 -#define MX28_INT_RTC_ALARM 29 -#define MX28_INT_COMMS 31 -#define MX28_INT_EMI_ERR 32 -#define MX28_INT_LCDIF 38 -#define MX28_INT_PXP 39 -#define MX28_INT_BCH 41 -#define MX28_INT_GPMI 42 -#define MX28_INT_SPDIF_ERROR 45 -#define MX28_INT_DUART 47 -#define MX28_INT_TIMER0 48 -#define MX28_INT_TIMER1 49 -#define MX28_INT_TIMER2 50 -#define MX28_INT_TIMER3 51 -#define MX28_INT_DCP_VMI 52 -#define MX28_INT_DCP 53 -#define MX28_INT_DCP_SECURE 54 -#define MX28_INT_SAIF1 58 -#define MX28_INT_SAIF0 59 -#define MX28_INT_SPDIF_DMA 66 -#define MX28_INT_I2C0_DMA 68 -#define MX28_INT_I2C1_DMA 69 -#define MX28_INT_AUART0_RX_DMA 70 -#define MX28_INT_AUART0_TX_DMA 71 -#define MX28_INT_AUART1_RX_DMA 72 -#define MX28_INT_AUART1_TX_DMA 73 -#define MX28_INT_AUART2_RX_DMA 74 -#define MX28_INT_AUART2_TX_DMA 75 -#define MX28_INT_AUART3_RX_DMA 76 -#define MX28_INT_AUART3_TX_DMA 77 -#define MX28_INT_AUART4_RX_DMA 78 -#define MX28_INT_AUART4_TX_DMA 79 -#define MX28_INT_SAIF0_DMA 80 -#define MX28_INT_SAIF1_DMA 81 -#define MX28_INT_SSP0_DMA 82 -#define MX28_INT_SSP1_DMA 83 -#define MX28_INT_SSP2_DMA 84 -#define MX28_INT_SSP3_DMA 85 -#define MX28_INT_LCDIF_DMA 86 -#define MX28_INT_HSADC_DMA 87 -#define MX28_INT_GPMI_DMA 88 -#define MX28_INT_DIGCTL_DEBUG_TRAP 89 -#define MX28_INT_USB1 92 -#define MX28_INT_USB0 93 -#define MX28_INT_USB1_WAKEUP 94 -#define MX28_INT_USB0_WAKEUP 95 -#define MX28_INT_SSP0_ERROR 96 -#define MX28_INT_SSP1_ERROR 97 -#define MX28_INT_SSP2_ERROR 98 -#define MX28_INT_SSP3_ERROR 99 -#define MX28_INT_ENET_SWI 100 -#define MX28_INT_ENET_MAC0 101 -#define MX28_INT_ENET_MAC1 102 -#define MX28_INT_ENET_MAC0_1588 103 -#define MX28_INT_ENET_MAC1_1588 104 -#define MX28_INT_I2C1_ERROR 110 -#define MX28_INT_I2C0_ERROR 111 -#define MX28_INT_AUART0 112 -#define MX28_INT_AUART1 113 -#define MX28_INT_AUART2 114 -#define MX28_INT_AUART3 115 -#define MX28_INT_AUART4 116 -#define MX28_INT_GPIO4 123 -#define MX28_INT_GPIO3 124 -#define MX28_INT_GPIO2 125 -#define MX28_INT_GPIO1 126 -#define MX28_INT_GPIO0 127 - -/* - * APBH DMA - */ -#define MX28_DMA_SSP0 0 -#define MX28_DMA_SSP1 1 -#define MX28_DMA_SSP2 2 -#define MX28_DMA_SSP3 3 -#define MX28_DMA_GPMI0 4 -#define MX28_DMA_GPMI1 5 -#define MX28_DMA_GPMI2 6 -#define MX28_DMA_GPMI3 7 -#define MX28_DMA_GPMI4 8 -#define MX28_DMA_GPMI5 9 -#define MX28_DMA_GPMI6 10 -#define MX28_DMA_GPMI7 11 -#define MX28_DMA_HSADC 12 -#define MX28_DMA_LCDIF 13 - -/* - * APBX DMA - */ -#define MX28_DMA_AUART4_RX 0 -#define MX28_DMA_AUART4_TX 1 -#define MX28_DMA_SPDIF_TX 2 -#define MX28_DMA_SAIF0 4 -#define MX28_DMA_SAIF1 5 -#define MX28_DMA_I2C0 6 -#define MX28_DMA_I2C1 7 -#define MX28_DMA_AUART0_RX 8 -#define MX28_DMA_AUART0_TX 9 -#define MX28_DMA_AUART1_RX 10 -#define MX28_DMA_AUART1_TX 11 -#define MX28_DMA_AUART2_RX 12 -#define MX28_DMA_AUART2_TX 13 -#define MX28_DMA_AUART3_RX 14 -#define MX28_DMA_AUART3_TX 15 - -#endif /* __MACH_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h deleted file mode 100644 index 7d4fb6d0afd..00000000000 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_H__ -#define __MACH_MXS_H__ - -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif -#include <asm/mach-types.h> -#include <mach/digctl.h> -#include <mach/hardware.h> - -/* - * IO addresses common to MXS-based - */ -#define MXS_IO_BASE_ADDR 0x80000000 -#define MXS_IO_SIZE SZ_1M - -#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000) -#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000) -#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000) -#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000) -#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000) -#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000) -#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000) -#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000) -#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000) -#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000) -#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000) -#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000) -#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000) -#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000) -#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000) -#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000) -#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000) -#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000) -#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000) -#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000) -#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000) -#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000) -#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000) -#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000) - -/* - * It maps the whole address space to [0xf4000000, 0xf50fffff]. - * - * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000 - * IO 0x80000000+0x100000 -> 0xf5000000+0x100000 - */ -#define MXS_IO_P2V(x) (0xf4000000 + \ - (((x) & 0x80000000) >> 7) + \ - (((x) & 0x000fffff))) - -#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x)) - -#define mxs_map_entry(soc, name, _type) { \ - .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ - .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ - .length = soc ## _ ## name ## _SIZE, \ - .type = _type, \ -} - -#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) - -#define MXS_SET_ADDR 0x4 -#define MXS_CLR_ADDR 0x8 -#define MXS_TOG_ADDR 0xc - -#ifndef __ASSEMBLER__ -static inline void __mxs_setl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_SET_ADDR); -} - -static inline void __mxs_clrl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_CLR_ADDR); -} - -static inline void __mxs_togl(u32 mask, void __iomem *reg) -{ - __raw_writel(mask, reg + MXS_TOG_ADDR); -} - -/* - * MXS CPU types - */ -#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) - -static inline int cpu_is_mx23(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); -} - -static inline int cpu_is_mx28(void) -{ - return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); -} -#endif - -#endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index e7b781d3788..16870bf853b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -11,22 +11,53 @@ */ #include <linux/clk.h> +#include <linux/clk/mxs.h> #include <linux/clkdev.h> +#include <linux/clocksource.h> #include <linux/can/platform/flexcan.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> +#include <linux/irqchip.h> +#include <linux/irqchip/mxs.h> #include <linux/micrel_phy.h> #include <linux/mxsfb.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/pinctrl/consumer.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/digctl.h> -#include <mach/mxs.h> +#include <asm/system_misc.h> + +/* MXS DIGCTL SAIF CLKMUX */ +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0 +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2 +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3 + +#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr)) + +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 +#define MXS_TOG_ADDR 0xc + +static inline void __mxs_setl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_SET_ADDR); +} + +static inline void __mxs_clrl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_CLR_ADDR); +} + +static inline void __mxs_togl(u32 mask, void __iomem *reg) +{ + __raw_writel(mask, reg + MXS_TOG_ADDR); +} static struct fb_videomode mx23evk_video_modes[] = { { @@ -165,14 +196,80 @@ static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { { /* sentinel */ } }; -static void __init imx23_timer_init(void) -{ - mx23_clocks_init(); -} +#define OCOTP_WORD_OFFSET 0x20 +#define OCOTP_WORD_COUNT 0x20 + +#define BM_OCOTP_CTRL_BUSY (1 << 8) +#define BM_OCOTP_CTRL_ERROR (1 << 9) +#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) -static void __init imx28_timer_init(void) +static DEFINE_MUTEX(ocotp_mutex); +static u32 ocotp_words[OCOTP_WORD_COUNT]; + +static const u32 *mxs_get_ocotp(void) { - mx28_clocks_init(); + struct device_node *np; + void __iomem *ocotp_base; + int timeout = 0x400; + size_t i; + static int once; + + if (once) + return ocotp_words; + + np = of_find_compatible_node(NULL, NULL, "fsl,ocotp"); + ocotp_base = of_iomap(np, 0); + WARN_ON(!ocotp_base); + + mutex_lock(&ocotp_mutex); + + /* + * clk_enable(hbus_clk) for ocotp can be skipped + * as it must be on when system is running. + */ + + /* try to clear ERROR bit */ + __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); + + /* check both BUSY and ERROR cleared */ + while ((__raw_readl(ocotp_base) & + (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + /* open OCOTP banks for read */ + __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + /* approximately wait 32 hclk cycles */ + udelay(1); + + /* poll BUSY bit becoming cleared */ + timeout = 0x400; + while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) + cpu_relax(); + + if (unlikely(!timeout)) + goto error_unlock; + + for (i = 0; i < OCOTP_WORD_COUNT; i++) + ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + + i * 0x10); + + /* close banks for power saving */ + __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); + + once = 1; + + mutex_unlock(&ocotp_mutex); + + return ocotp_words; + +error_unlock: + mutex_unlock(&ocotp_mutex); + pr_err("%s: timeout in reading OCOTP\n", __func__); + return NULL; } enum mac_oui { @@ -454,32 +551,62 @@ static void __init mxs_machine_init(void) imx28_evk_post_init(); } -static const char *imx23_dt_compat[] __initdata = { - "fsl,imx23", - NULL, -}; +#define MX23_CLKCTRL_RESET_OFFSET 0x120 +#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 +#define MXS_CLKCTRL_RESET_CHIP (1 << 1) + +/* + * Reset the system. It is called by machine_restart(). + */ +static void mxs_restart(char mode, const char *cmd) +{ + struct device_node *np; + void __iomem *reset_addr; + + np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl"); + reset_addr = of_iomap(np, 0); + if (!reset_addr) + goto soft; + + if (of_device_is_compatible(np, "fsl,imx23-clkctrl")) + reset_addr += MX23_CLKCTRL_RESET_OFFSET; + else + reset_addr += MX28_CLKCTRL_RESET_OFFSET; -static const char *imx28_dt_compat[] __initdata = { + /* reset the chip */ + __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr); + + pr_err("Failed to assert the chip reset\n"); + + /* Delay to allow the serial port to show the message */ + mdelay(50); + +soft: + /* We'll take a jump through zero as a poor second */ + soft_restart(0); +} + +static void __init mxs_timer_init(void) +{ + if (of_machine_is_compatible("fsl,imx23")) + mx23_clocks_init(); + else + mx28_clocks_init(); + clocksource_of_init(); +} + +static const char *mxs_dt_compat[] __initdata = { "fsl,imx28", + "fsl,imx23", NULL, }; -DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)") - .map_io = mx23_map_io, - .init_irq = icoll_init_irq, - .handle_irq = icoll_handle_irq, - .init_time = imx23_timer_init, - .init_machine = mxs_machine_init, - .dt_compat = imx23_dt_compat, - .restart = mxs_restart, -MACHINE_END - -DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") - .map_io = mx28_map_io, - .init_irq = icoll_init_irq, +DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = irqchip_init, .handle_irq = icoll_handle_irq, - .init_time = imx28_timer_init, + .init_time = mxs_timer_init, .init_machine = mxs_machine_init, - .dt_compat = imx28_dt_compat, + .dt_compat = mxs_dt_compat, .restart = mxs_restart, MACHINE_END diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c deleted file mode 100644 index e63b7d87acb..00000000000 --- a/arch/arm/mach-mxs/mm.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - * - * Create static mapping between physical to virtual memory. - */ - -#include <linux/mm.h> -#include <linux/init.h> - -#include <asm/mach/map.h> - -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/common.h> - -/* - * Define the MX23 memory map. - */ -static struct map_desc mx23_io_desc[] __initdata = { - mxs_map_entry(MX23, OCRAM, MT_DEVICE), - mxs_map_entry(MX23, IO, MT_DEVICE), -}; - -/* - * Define the MX28 memory map. - */ -static struct map_desc mx28_io_desc[] __initdata = { - mxs_map_entry(MX28, OCRAM, MT_DEVICE), - mxs_map_entry(MX28, IO, MT_DEVICE), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx23_map_io(void) -{ - iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc)); -} - -void __init mx28_map_io(void) -{ - iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc)); -} diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c deleted file mode 100644 index 1dff4670375..00000000000 --- a/arch/arm/mach-mxs/ocotp.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/mutex.h> - -#include <asm/processor.h> /* for cpu_relax() */ - -#include <mach/mxs.h> -#include <mach/common.h> - -#define OCOTP_WORD_OFFSET 0x20 -#define OCOTP_WORD_COUNT 0x20 - -#define BM_OCOTP_CTRL_BUSY (1 << 8) -#define BM_OCOTP_CTRL_ERROR (1 << 9) -#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12) - -static DEFINE_MUTEX(ocotp_mutex); -static u32 ocotp_words[OCOTP_WORD_COUNT]; - -const u32 *mxs_get_ocotp(void) -{ - void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR); - int timeout = 0x400; - size_t i; - static int once = 0; - - if (once) - return ocotp_words; - - mutex_lock(&ocotp_mutex); - - /* - * clk_enable(hbus_clk) for ocotp can be skipped - * as it must be on when system is running. - */ - - /* try to clear ERROR bit */ - __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base); - - /* check both BUSY and ERROR cleared */ - while ((__raw_readl(ocotp_base) & - (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - /* open OCOTP banks for read */ - __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - /* approximately wait 32 hclk cycles */ - udelay(1); - - /* poll BUSY bit becoming cleared */ - timeout = 0x400; - while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout) - cpu_relax(); - - if (unlikely(!timeout)) - goto error_unlock; - - for (i = 0; i < OCOTP_WORD_COUNT; i++) - ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET + - i * 0x10); - - /* close banks for power saving */ - __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base); - - once = 1; - - mutex_unlock(&ocotp_mutex); - - return ocotp_words; - -error_unlock: - mutex_unlock(&ocotp_mutex); - pr_err("%s: timeout in reading OCOTP\n", __func__); - return NULL; -} diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c deleted file mode 100644 index 30042e23bfa..00000000000 --- a/arch/arm/mach-mxs/system.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/proc-fns.h> -#include <asm/system_misc.h> - -#include <mach/mxs.h> -#include <mach/common.h> - -#define MX23_CLKCTRL_RESET_OFFSET 0x120 -#define MX28_CLKCTRL_RESET_OFFSET 0x1e0 -#define MXS_CLKCTRL_RESET_CHIP (1 << 1) - -#define MXS_MODULE_CLKGATE (1 << 30) -#define MXS_MODULE_SFTRST (1 << 31) - -static void __iomem *mxs_clkctrl_reset_addr; - -/* - * Reset the system. It is called by machine_restart(). - */ -void mxs_restart(char mode, const char *cmd) -{ - /* reset the chip */ - __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr); - - pr_err("Failed to assert the chip reset\n"); - - /* Delay to allow the serial port to show the message */ - mdelay(50); - - /* We'll take a jump through zero as a poor second */ - soft_restart(0); -} - -static int __init mxs_arch_reset_init(void) -{ - struct clk *clk; - - mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) + - (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET : - MX28_CLKCTRL_RESET_OFFSET); - - clk = clk_get_sys("rtc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - return 0; -} -core_initcall(mxs_arch_reset_init); - -/* - * Clear the bit and poll it cleared. This is usually called with - * a reset address and mask being either SFTRST(bit 31) or CLKGATE - * (bit 30). - */ -static int clear_poll_bit(void __iomem *addr, u32 mask) -{ - int timeout = 0x400; - - /* clear the bit */ - __mxs_clrl(mask, addr); - - /* - * SFTRST needs 3 GPMI clocks to settle, the reference manual - * recommends to wait 1us. - */ - udelay(1); - - /* poll the bit becoming clear */ - while ((__raw_readl(addr) & mask) && --timeout) - /* nothing */; - - return !timeout; -} - -int mxs_reset_block(void __iomem *reset_addr) -{ - int ret; - int timeout = 0x400; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear CLKGATE */ - __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr); - - /* set SFTRST to reset the block */ - __mxs_setl(MXS_MODULE_SFTRST, reset_addr); - udelay(1); - - /* poll CLKGATE becoming set */ - while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout) - /* nothing */; - if (unlikely(!timeout)) - goto error; - - /* clear and poll SFTRST */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST); - if (unlikely(ret)) - goto error; - - /* clear and poll CLKGATE */ - ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE); - if (unlikely(ret)) - goto error; - - return 0; - -error: - pr_err("%s(%p): module reset timeout\n", __func__, reset_addr); - return -ETIMEDOUT; -} -EXPORT_SYMBOL(mxs_reset_block); diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index b5c06f9766f..f6a74872f14 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -15,12 +15,15 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/of.h> -#include <mach/common.h> -#include <mach/mx23.h> +#include <linux/of_address.h> #include "clk.h" -#define DIGCTRL MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR) -#define CLKCTRL MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR) +static void __iomem *clkctrl; +static void __iomem *digctrl; + +#define CLKCTRL clkctrl +#define DIGCTRL digctrl + #define PLLCTRL0 (CLKCTRL + 0x0000) #define CPU (CLKCTRL + 0x0020) #define HBUS (CLKCTRL + 0x0030) @@ -48,10 +51,10 @@ static void __init clk_misc_init(void) u32 val; /* Gate off cpu clock in WFI for power saving */ - __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU); + writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET); /* Clear BYPASS for SAIF */ - __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ); + writel_relaxed(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ + CLR); /* SAIF has to use frac div for functional operation */ val = readl_relaxed(SAIF); @@ -62,14 +65,14 @@ static void __init clk_misc_init(void) * Source ssp clock from ref_io than ref_xtal, * as ref_xtal only provides 24 MHz as maximum. */ - __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ); + writel_relaxed(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ + CLR); /* * 480 MHz seems too high to be ssp clock source directly, * so set frac to get a 288 MHz ref_io. */ - __mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC); - __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC); + writel_relaxed(0x3f << BP_FRAC_IOFRAC, FRAC + CLR); + writel_relaxed(30 << BP_FRAC_IOFRAC, FRAC + SET); } static const char *sel_pll[] __initconst = { "pll", "ref_xtal", }; @@ -101,6 +104,14 @@ int __init mx23_clocks_init(void) struct device_node *np; u32 i; + np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl"); + digctrl = of_iomap(np, 0); + WARN_ON(!digctrl); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl"); + clkctrl = of_iomap(np, 0); + WARN_ON(!clkctrl); + clk_misc_init(); clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000); @@ -153,19 +164,12 @@ int __init mx23_clocks_init(void) return PTR_ERR(clks[i]); } - np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl"); - if (np) { - clk_data.clks = clks; - clk_data.clk_num = ARRAY_SIZE(clks); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - } - - clk_register_clkdev(clks[clk32k], NULL, "timrot"); + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); - mxs_timer_init(); - return 0; } diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index 76ce6c6d111..d0e5eed146d 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -15,11 +15,12 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/of.h> -#include <mach/common.h> -#include <mach/mx28.h> +#include <linux/of_address.h> #include "clk.h" -#define CLKCTRL MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR) +static void __iomem *clkctrl; +#define CLKCTRL clkctrl + #define PLL0CTRL0 (CLKCTRL + 0x0000) #define PLL1CTRL0 (CLKCTRL + 0x0020) #define PLL2CTRL0 (CLKCTRL + 0x0040) @@ -53,7 +54,8 @@ #define BP_FRAC0_IO1FRAC 16 #define BP_FRAC0_IO0FRAC 24 -#define DIGCTRL MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR) +static void __iomem *digctrl; +#define DIGCTRL digctrl #define BP_SAIF_CLKMUX 10 /* @@ -72,8 +74,8 @@ int mxs_saif_clkmux_select(unsigned int clkmux) if (clkmux > 0x3) return -EINVAL; - __mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL); - __mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL); + writel_relaxed(0x3 << BP_SAIF_CLKMUX, DIGCTRL + CLR); + writel_relaxed(clkmux << BP_SAIF_CLKMUX, DIGCTRL + SET); return 0; } @@ -83,13 +85,13 @@ static void __init clk_misc_init(void) u32 val; /* Gate off cpu clock in WFI for power saving */ - __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU); + writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET); /* 0 is a bad default value for a divider */ - __mxs_setl(1 << BP_ENET_DIV_TIME, ENET); + writel_relaxed(1 << BP_ENET_DIV_TIME, ENET + SET); /* Clear BYPASS for SAIF */ - __mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ); + writel_relaxed(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ + CLR); /* SAIF has to use frac div for functional operation */ val = readl_relaxed(SAIF0); @@ -109,7 +111,7 @@ static void __init clk_misc_init(void) * Source ssp clock from ref_io than ref_xtal, * as ref_xtal only provides 24 MHz as maximum. */ - __mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ); + writel_relaxed(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ + CLR); /* * 480 MHz seems too high to be ssp clock source directly, @@ -156,6 +158,14 @@ int __init mx28_clocks_init(void) struct device_node *np; u32 i; + np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl"); + digctrl = of_iomap(np, 0); + WARN_ON(!digctrl); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl"); + clkctrl = of_iomap(np, 0); + WARN_ON(!clkctrl); + clk_misc_init(); clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000); @@ -231,20 +241,14 @@ int __init mx28_clocks_init(void) return PTR_ERR(clks[i]); } - np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl"); - if (np) { - clk_data.clks = clks; - clk_data.clk_num = ARRAY_SIZE(clks); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - } + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - clk_register_clkdev(clks[xbus], NULL, "timrot"); clk_register_clkdev(clks[enet_out], NULL, "enet_out"); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); - mxs_timer_init(); - return 0; } diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 4d8283aec5b..89c5adc498b 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o +obj-$(CONFIG_ARCH_MXS) += mxs_timer.o obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o diff --git a/arch/arm/mach-mxs/timer.c b/drivers/clocksource/mxs_timer.c index 421020498a1..02af4204af8 100644 --- a/arch/arm/mach-mxs/timer.c +++ b/drivers/clocksource/mxs_timer.c @@ -26,12 +26,12 @@ #include <linux/clockchips.h> #include <linux/clk.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/stmp_device.h> #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include <mach/mxs.h> -#include <mach/common.h> /* * There are 2 versions of the timrot on Freescale MXS-based SoCs. @@ -79,25 +79,25 @@ static struct clock_event_device mxs_clockevent_device; static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; -static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR); +static void __iomem *mxs_timrot_base; static u32 timrot_major_version; static inline void timrot_irq_disable(void) { - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); } static inline void timrot_irq_enable(void) { - __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET); } static void timrot_irq_acknowledge(void) { - __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ, - mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); + __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base + + HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR); } static cycle_t timrotv1_get_cycles(struct clocksource *cs) @@ -242,19 +242,15 @@ static int __init mxs_clocksource_init(struct clk *timer_clk) return 0; } -void __init mxs_timer_init(void) +static void __init mxs_timer_init(struct device_node *np) { - struct device_node *np; struct clk *timer_clk; int irq; - np = of_find_compatible_node(NULL, NULL, "fsl,timrot"); - if (!np) { - pr_err("%s: failed find timrot node\n", __func__); - return; - } + mxs_timrot_base = of_iomap(np, 0); + WARN_ON(!mxs_timrot_base); - timer_clk = clk_get_sys("timrot", NULL); + timer_clk = of_clk_get(np, 0); if (IS_ERR(timer_clk)) { pr_err("%s: failed to get clk\n", __func__); return; @@ -265,11 +261,12 @@ void __init mxs_timer_init(void) /* * Initialize timers to a known state */ - mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); + stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL); /* get timrot version */ timrot_major_version = __raw_readl(mxs_timrot_base + - (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET : + (of_device_is_compatible(np, "fsl,imx23-timrot") ? + MX23_TIMROT_VERSION_OFFSET : MX28_TIMROT_VERSION_OFFSET)); timrot_major_version >>= BP_TIMROT_MAJOR_VERSION; @@ -304,3 +301,4 @@ void __init mxs_timer_init(void) irq = irq_of_parse_and_map(np, 0); setup_irq(irq, &mxs_timer_irq); } +CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init); diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 98e3b87bdf1..9d8f4f1c6e3 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o +obj-$(CONFIG_ARCH_MXS) += irq-mxs.o obj-$(CONFIG_METAG) += irq-metag-ext.o obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o diff --git a/arch/arm/mach-mxs/icoll.c b/drivers/irqchip/irq-mxs.c index e26eeba4659..29889bbdcc6 100644 --- a/arch/arm/mach-mxs/icoll.c +++ b/drivers/irqchip/irq-mxs.c @@ -22,10 +22,12 @@ #include <linux/irqdomain.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/stmp_device.h> #include <asm/exception.h> -#include <mach/mxs.h> -#include <mach/common.h> + +#include "irqchip.h" #define HW_ICOLL_VECTOR 0x0000 #define HW_ICOLL_LEVELACK 0x0010 @@ -38,7 +40,7 @@ #define ICOLL_NUM_IRQS 128 -static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR); +static void __iomem *icoll_base; static struct irq_domain *icoll_domain; static void icoll_ack_irq(struct irq_data *d) @@ -103,23 +105,17 @@ static struct irq_domain_ops icoll_irq_domain_ops = { static void __init icoll_of_init(struct device_node *np, struct device_node *interrupt_parent) { + icoll_base = of_iomap(np, 0); + WARN_ON(!icoll_base); + /* * Interrupt Collector reset, which initializes the priority * for each irq to level 0. */ - mxs_reset_block(icoll_base + HW_ICOLL_CTRL); + stmp_reset_block(icoll_base + HW_ICOLL_CTRL); icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS, &icoll_irq_domain_ops, NULL); WARN_ON(!icoll_domain); } - -static const struct of_device_id icoll_of_match[] __initconst = { - {.compatible = "fsl,icoll", .data = icoll_of_init}, - { /* sentinel */ } -}; - -void __init icoll_init_irq(void) -{ - of_irq_init(icoll_of_match); -} +IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init); diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c index 98f0d3c3073..67d26128bc8 100644 --- a/drivers/rtc/rtc-stmp3xxx.c +++ b/drivers/rtc/rtc-stmp3xxx.c @@ -30,8 +30,6 @@ #include <linux/stmp_device.h> #include <linux/stmp3xxx_rtc_wdt.h> -#include <mach/common.h> - #define STMP3XXX_RTC_CTRL 0x0 #define STMP3XXX_RTC_CTRL_SET 0x4 #define STMP3XXX_RTC_CTRL_CLR 0x8 @@ -271,7 +269,7 @@ static int stmp3xxx_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc_data); - mxs_reset_block(rtc_data->io); + stmp_reset_block(rtc_data->io); writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN | STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN | STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE, @@ -319,7 +317,7 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev) { struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(dev); - mxs_reset_block(rtc_data->io); + stmp_reset_block(rtc_data->io); writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN | STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN | STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE, diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 55a459b6190..0eb5b4d759e 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -36,9 +36,6 @@ #include <linux/delay.h> #include <linux/input.h> -#include <mach/mxs.h> -#include <mach/common.h> - #include <linux/iio/iio.h> #include <linux/iio/buffer.h> #include <linux/iio/trigger.h> diff --git a/include/linux/clk/mxs.h b/include/linux/clk/mxs.h new file mode 100644 index 00000000000..90c30dc3efc --- /dev/null +++ b/include/linux/clk/mxs.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_CLK_MXS_H +#define __LINUX_CLK_MXS_H + +int mx23_clocks_init(void); +int mx28_clocks_init(void); +int mxs_saif_clkmux_select(unsigned int clkmux); + +#endif diff --git a/include/linux/irqchip/mxs.h b/include/linux/irqchip/mxs.h new file mode 100644 index 00000000000..9039a538a91 --- /dev/null +++ b/include/linux/irqchip/mxs.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_IRQCHIP_MXS_H +#define __LINUX_IRQCHIP_MXS_H + +extern void icoll_handle_irq(struct pt_regs *); + +#endif diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 3a2aa1d19b9..41a6136e353 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -33,11 +33,12 @@ #include <sound/pcm_params.h> #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/mxs.h> #include "mxs-saif.h" +#define MXS_SET_ADDR 0x4 +#define MXS_CLR_ADDR 0x8 + static struct mxs_saif *mxs_saif[2]; /* |