Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang: - new drivers: Kontron PLD, Wondermedia VT - mv64xxx driver gained sun4i support and a bigger cleanup - duplicate driver 'intel-mid' removed - added generic device tree binding for sda holding time (and designware driver already uses it) - we tried to allow driver probing with only device tree and no i2c ids, but I had to revert it because of side effects. Needs some rethinking. - driver bugfixes, cleanups... * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c-designware: use div_u64 to fix link i2c: Kontron PLD i2c bus driver i2c: iop3xxx: fix build failure after waitqueue changes i2c-designware: make SDA hold time configurable i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided i2c: imx: allow autoloading on dt ids i2c: mv64xxx: Fix transfer error code i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs i2c: omap: correct usage of the interrupt enable register i2c-pxa: prepare clock before use Revert "i2c: core: make it possible to match a pure device tree driver" i2c: nomadik: allocate adapter number dynamically i2c: nomadik: support elder Nomadiks i2c: mv64xxx: Add Allwinner sun4i compatible i2c: mv64xxx: make the registers offset configurable i2c: mv64xxx: Add macros to access parts of registers i2c: vt8500: Add support for I2C bus on Wondermedia SoCs i2c: designware: fix race between subsequent xfers i2c: bfin-twi: Read and write the FIFO in loop i2c: core: make it possible to match a pure device tree driver ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2013-07-04 14:02:09 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2013-07-04 14:02:09 -0700
commit: 98f486f18d16e2214728d101ed8b6a12dce75539 (patch)
tree: 987e2fcbd6089a94a00e489cd62fec1b8b10cd02
parent: 84cbd7222b2b00dcddef3103203986b3d59c836a (diff)
parent: 97191d734f6ac028e5e6dcd574378c1544a16c0b (diff)
29 files changed, 1268 insertions, 1398 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index e42a2ee233e..7fd7fa25e9b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -10,6 +10,10 @@ Recommended properties :
 
  - clock-frequency : desired I2C bus clock frequency in Hz.
 
+Optional properties :
+ - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
+   This option is only supported in hardware blocks version 1.11a or newer.
+
 Example :
 
 	i2c@f0000 {
@@ -20,3 +24,14 @@ Example :
 		interrupts = <11>;
 		clock-frequency = <400000>;
 	};
+
+	i2c@1120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,designware-i2c";
+		reg = <0x1120000 0x1000>;
+		interrupt-parent = <&ictl>;
+		interrupts = <12 1>;
+		clock-frequency = <400000>;
+		i2c-sda-hold-time-ns = <300>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index f46d928aa73..a1ee681942c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -6,7 +6,11 @@ Required properties :
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be "marvell,mv64xxx-i2c"
  - interrupts      : The interrupt number
- - clock-frequency : Desired I2C bus clock frequency in Hz.
+
+Optional properties :
+
+ - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
+default frequency is 100kHz
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt b/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt
new file mode 100644
index 00000000000..94a425eaa6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt
@@ -0,0 +1,24 @@
+* Wondermedia I2C Controller
+
+Required properties :
+
+ - compatible : should be "wm,wm8505-i2c"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number
+ - clocks : phandle to the I2C clock source
+
+Optional properties :
+
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+	Valid values are 100000 and 400000.
+	Default to 100000 if not specified, or invalid value.
+
+Example :
+
+	i2c_0: i2c@d8280000 {
+		compatible = "wm,wm8505-i2c";
+		reg = <0xd8280000 0x1000>;
+		interrupts = <19>;
+		clocks = <&clki2c0>;
+		clock-frequency = <400000>;
+	};
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index d55b8ab2d10..d29dea0f323 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -24,6 +24,7 @@ Supported adapters:
   * Intel Lynx Point-LP (PCH)
   * Intel Avoton (SOC)
   * Intel Wellsburg (PCH)
+  * Intel Coleto Creek (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/MAINTAINERS b/MAINTAINERS
index 28ffeec53bb..50105f98cb6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1301,6 +1301,7 @@ S:	Maintained
 F:	arch/arm/mach-vt8500/
 F:	drivers/clocksource/vt8500_timer.c
 F:	drivers/gpio/gpio-vt8500.c
+F:	drivers/i2c/busses/i2c-wmt.c
 F:	drivers/mmc/host/wmt-sdmmc.c
 F:	drivers/pwm/pwm-vt8500.c
 F:	drivers/rtc/rtc-vt8500.c
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
index 0fa0d4abe79..ebc313a9f5b 100644
--- a/arch/arc/boot/dts/abilis_tb100_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -45,19 +45,19 @@
 		};
 
 		i2c0: i2c@FF120000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 		i2c1: i2c@FF121000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 		i2c2: i2c@FF122000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 		i2c3: i2c@FF123000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 		i2c4: i2c@FF124000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 
 		leds {
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
index a4d80ce283a..b204657993a 100644
--- a/arch/arc/boot/dts/abilis_tb101_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -45,19 +45,19 @@
 		};
 
 		i2c0: i2c@FF120000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 		i2c1: i2c@FF121000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 		i2c2: i2c@FF122000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 		i2c3: i2c@FF123000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 		i2c4: i2c@FF124000 {
-			sda-hold-time = <432>;
+			i2c-sda-hold-time-ns = <432>;
 		};
 
 		leds {
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 527503617ee..fdc2ab4af31 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -108,6 +108,7 @@ config I2C_I801
 	    Lynx Point-LP (PCH)
 	    Avoton (SOC)
 	    Wellsburg (PCH)
+	    Coleto Creek (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -475,16 +476,6 @@ config I2C_IMX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-imx.
 
-config I2C_INTEL_MID
-	tristate "Intel Moorestown/Medfield Platform I2C controller"
-	depends on PCI
-	help
-	  Say Y here if you have an Intel Moorestown/Medfield platform I2C
-	  controller.
-
-	  This support is also available as a module. If so, the module
-	  will be called i2c-intel-mid.
-
 config I2C_IOP3XX
 	tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
 	depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
@@ -495,6 +486,16 @@ config I2C_IOP3XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-iop3xx.
 
+config I2C_KEMPLD
+	tristate "Kontron COM I2C Controller"
+	depends on MFD_KEMPLD
+	help
+	  This enables support for the I2C bus interface on some Kontron ETX
+	  and COMexpress (ETXexpress) modules.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-kempld.
+
 config I2C_MPC
 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 	depends on PPC
@@ -508,10 +509,11 @@ config I2C_MPC
 
 config I2C_MV64XXX
 	tristate "Marvell mv64xxx I2C Controller"
-	depends on (MV64X60 || PLAT_ORION)
+	depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Marvell 64xxx line of host bridges.
+	  This driver is also used for Allwinner SoCs I2C controllers.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mv64xxx.
@@ -725,6 +727,16 @@ config I2C_VERSATILE
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-versatile.
 
+config I2C_WMT
+	tristate "Wondermedia WM8xxx SoC I2C bus support"
+	depends on ARCH_VT8500
+	help
+	  Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
+	  SoCs.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called i2c-wmt.
+
 config I2C_OCTEON
 	tristate "Cavium OCTEON I2C bus support"
 	depends on CPU_CAVIUM_OCTEON
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 8f4fc23b85b..d00997f3eb3 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -46,8 +46,8 @@ obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
-obj-$(CONFIG_I2C_INTEL_MID)	+= i2c-intel-mid.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
+obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
@@ -71,6 +71,7 @@ obj-$(CONFIG_I2C_SIRF)		+= i2c-sirf.o
 obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o
 obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
+obj-$(CONFIG_I2C_WMT)		+= i2c-wmt.o
 obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
 obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 05080c449c6..13ea1c29873 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -39,33 +39,40 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 	unsigned short mast_stat = read_MASTER_STAT(iface);
 
 	if (twi_int_status & XMTSERV) {
+		if (iface->writeNum <= 0) {
+			/* start receive immediately after complete sending in
+			 * combine mode.
+			 */
+			if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | MDIR);
+			else if (iface->manual_stop)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | STOP);
+			else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg + 1 < iface->msg_num) {
+				if (iface->pmsg[iface->cur_msg + 1].flags &
+					I2C_M_RD)
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) |
+						MDIR);
+				else
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) &
+						~MDIR);
+			}
+		}
 		/* Transmit next data */
-		if (iface->writeNum > 0) {
+		while (iface->writeNum > 0 &&
+			(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
 			SSYNC();
 			write_XMT_DATA8(iface, *(iface->transPtr++));
 			iface->writeNum--;
 		}
-		/* start receive immediately after complete sending in
-		 * combine mode.
-		 */
-		else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | MDIR);
-		else if (iface->manual_stop)
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | STOP);
-		else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
-		         iface->cur_msg + 1 < iface->msg_num) {
-			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
-				write_MASTER_CTL(iface,
-					read_MASTER_CTL(iface) | MDIR);
-			else
-				write_MASTER_CTL(iface,
-					read_MASTER_CTL(iface) & ~MDIR);
-		}
 	}
 	if (twi_int_status & RCVSERV) {
-		if (iface->readNum > 0) {
+		while (iface->readNum > 0 &&
+			(read_FIFO_STAT(iface) & RCVSTAT)) {
 			/* Receive next data */
 			*(iface->transPtr) = read_RCV_DATA8(iface);
 			if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 9e600210872..2e1f7eb55bf 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -654,7 +654,7 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
 
 	cpm->ofdev = ofdev;
 
-	dev_set_drvdata(&ofdev->dev, cpm);
+	platform_set_drvdata(ofdev, cpm);
 
 	cpm->adap = cpm_ops;
 	i2c_set_adapdata(&cpm->adap, cpm);
@@ -697,7 +697,7 @@ out_free:
 
 static int cpm_i2c_remove(struct platform_device *ofdev)
 {
-	struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);
+	struct cpm_i2c *cpm = platform_get_drvdata(ofdev);
 
 	i2c_del_adapter(&cpm->adap);
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index cf20e06a88e..fa556057d22 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -646,13 +646,6 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	struct resource *mem, *irq;
 	int r;
 
-	/* NOTE: driver uses the static register mapping */
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no mem resource?\n");
-		return -ENODEV;
-	}
-
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq) {
 		dev_err(&pdev->dev, "no irq resource?\n");
@@ -697,6 +690,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		return -ENODEV;
 	clk_prepare_enable(dev->clk);
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(dev->base)) {
 		r = PTR_ERR(dev->base);
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index c41ca6354fc..ad46616de29 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -67,9 +67,12 @@
 #define DW_IC_STATUS		0x70
 #define DW_IC_TXFLR		0x74
 #define DW_IC_RXFLR		0x78
+#define DW_IC_SDA_HOLD		0x7c
 #define DW_IC_TX_ABRT_SOURCE	0x80
 #define DW_IC_ENABLE_STATUS	0x9c
 #define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_VERSION	0xf8
+#define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
 #define DW_IC_COMP_TYPE		0xfc
 #define DW_IC_COMP_TYPE_VALUE	0x44570140
 
@@ -332,6 +335,16 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
 	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
+	/* Configure SDA Hold Time if required */
+	if (dev->sda_hold_time) {
+		reg = dw_readl(dev, DW_IC_COMP_VERSION);
+		if (reg >= DW_IC_SDA_HOLD_MIN_VERS)
+			dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+		else
+			dev_warn(dev->dev,
+				"Hardware too old to adjust SDA hold time.");
+	}
+
 	/* Configure Tx/Rx FIFO threshold levels */
 	dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
 	dw_writel(dev, 0, DW_IC_RX_TL);
@@ -580,14 +593,23 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	i2c_dw_xfer_init(dev);
 
 	/* wait for tx to complete */
-	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
+	ret = wait_for_completion_timeout(&dev->cmd_complete, HZ);
 	if (ret == 0) {
 		dev_err(dev->dev, "controller timed out\n");
+		/* i2c_dw_init implicitly disables the adapter */
 		i2c_dw_init(dev);
 		ret = -ETIMEDOUT;
 		goto done;
-	} else if (ret < 0)
-		goto done;
+	}
+
+	/*
+	 * We must disable the adapter before unlocking the &dev->lock mutex
+	 * below. Otherwise the hardware might continue generating interrupts
+	 * which in turn causes a race condition with the following transfer.
+	 * Needs some more investigation if the additional interrupts are
+	 * a hardware bug or this driver doesn't handle them correctly yet.
+	 */
+	__i2c_dw_enable(dev, false);
 
 	if (dev->msg_err) {
 		ret = dev->msg_err;
@@ -596,8 +618,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	/* no error */
 	if (likely(!dev->cmd_err)) {
-		/* Disable the adapter */
-		__i2c_dw_enable(dev, false);
 		ret = num;
 		goto done;
 	}
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index e761ad18dd6..912aa226286 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -90,6 +90,7 @@ struct dw_i2c_dev {
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
 	int			rx_outstanding;
+	u32			sda_hold_time;
 };
 
 #define ACCESS_SWAP		0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 35b70a1edf5..4c5fadabe49 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -34,6 +34,7 @@
 #include <linux/sched.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
@@ -87,13 +88,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	struct resource *mem;
 	int irq, r;
 
-	/* NOTE: driver uses the static register mapping */
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no mem resource?\n");
-		return -EINVAL;
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq resource?\n");
@@ -104,6 +98,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	if (!dev)
 		return -ENOMEM;
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(dev->base))
 		return PTR_ERR(dev->base);
@@ -121,6 +116,16 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(dev->clk);
 	clk_prepare_enable(dev->clk);
 
+	if (pdev->dev.of_node) {
+		u32 ht = 0;
+		u32 ic_clk = dev->get_clk_rate_khz(dev);
+
+		of_property_read_u32(pdev->dev.of_node,
+					"i2c-sda-hold-time-ns", &ht);
+		dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
+					     1000000);
+	}
+
 	dev->functionality =
 		I2C_FUNC_I2C |
 		I2C_FUNC_10BIT_ADDR |
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 3a6903f6391..4ebceed6bc6 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -58,6 +58,7 @@
   Wellsburg (PCH) MS    0x8d7d     32     hard     yes     yes     yes
   Wellsburg (PCH) MS    0x8d7e     32     hard     yes     yes     yes
   Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
+  Coleto Creek (PCH)    0x23b0     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -169,6 +170,7 @@
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS	0x1f3c
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS	0x23b0
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS	0x8d22
@@ -817,6 +819,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
 	{ 0, }
 };
 
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 405a2e24045..973f5168827 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -705,7 +705,7 @@ static int iic_probe(struct platform_device *ofdev)
 		return -ENOMEM;
 	}
 
-	dev_set_drvdata(&ofdev->dev, dev);
+	platform_set_drvdata(ofdev, dev);
 
 	dev->vaddr = of_iomap(np, 0);
 	if (dev->vaddr == NULL) {
@@ -782,7 +782,7 @@ error_cleanup:
  */
 static int iic_remove(struct platform_device *ofdev)
 {
-	struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev);
+	struct ibm_iic_private *dev = platform_get_drvdata(ofdev);
 
 	i2c_del_adapter(&dev->adap);
 
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 82f20c60bb7..e24279725d3 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -51,7 +51,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_i2c.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/i2c-imx.h>
 
 /** Defines ********************************************************************
@@ -148,6 +147,7 @@ static const struct of_device_id i2c_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
 
 static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
 {
@@ -493,24 +493,19 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	struct imx_i2c_struct *i2c_imx;
 	struct resource *res;
 	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
-	struct pinctrl *pinctrl;
 	void __iomem *base;
 	int irq, ret;
 	u32 bitrate;
 
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "can't get device resources\n");
-		return -ENOENT;
-	}
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "can't get irq number\n");
 		return -ENOENT;
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
@@ -535,12 +530,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
 	i2c_imx->base			= base;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		dev_err(&pdev->dev, "can't get/select pinctrl\n");
-		return PTR_ERR(pinctrl);
-	}
-
 	/* Get I2C clock */
 	i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c_imx->clk)) {
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
deleted file mode 100644
index 0fb659726ff..00000000000
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ /dev/null
@@ -1,1121 +0,0 @@
-/*
- * Support for Moorestown/Medfield I2C chip
- *
- * Copyright (c) 2009 Intel Corporation.
- * Copyright (c) 2009 Synopsys. Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License, version
- * 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT ANY
- * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/pm_runtime.h>
-#include <linux/io.h>
-
-#define DRIVER_NAME	"i2c-intel-mid"
-#define VERSION		"Version 0.5ac2"
-#define PLATFORM	"Moorestown/Medfield"
-
-/* Tables use: 0 Moorestown, 1 Medfield */
-#define NUM_PLATFORMS	2
-enum platform_enum {
-	MOORESTOWN = 0,
-	MEDFIELD = 1,
-};
-
-enum mid_i2c_status {
-	STATUS_IDLE = 0,
-	STATUS_READ_START,
-	STATUS_READ_IN_PROGRESS,
-	STATUS_READ_SUCCESS,
-	STATUS_WRITE_START,
-	STATUS_WRITE_SUCCESS,
-	STATUS_XFER_ABORT,
-	STATUS_STANDBY
-};
-
-/**
- * struct intel_mid_i2c_private	- per device I²C context
- * @adap: core i2c layer adapter information
- * @dev: device reference for power management
- * @base: register base
- * @speed: speed mode for this port
- * @complete: completion object for transaction wait
- * @abort: reason for last abort
- * @rx_buf: pointer into working receive buffer
- * @rx_buf_len: receive buffer length
- * @status: adapter state machine
- * @msg: the message we are currently processing
- * @platform: the MID device type we are part of
- * @lock: transaction serialization
- *
- * We allocate one of these per device we discover, it holds the core
- * i2c layer objects and the data we need to track privately.
- */
-struct intel_mid_i2c_private {
-	struct i2c_adapter adap;
-	struct device *dev;
-	void __iomem *base;
-	int speed;
-	struct completion complete;
-	int abort;
-	u8 *rx_buf;
-	int rx_buf_len;
-	enum mid_i2c_status status;
-	struct i2c_msg *msg;
-	enum platform_enum platform;
-	struct mutex lock;
-};
-
-#define NUM_SPEEDS		3
-
-#define ACTIVE			0
-#define STANDBY			1
-
-
-/* Control register */
-#define IC_CON			0x00
-#define SLV_DIS			(1 << 6)	/* Disable slave mode */
-#define RESTART			(1 << 5)	/* Send a Restart condition */
-#define	ADDR_10BIT		(1 << 4)	/* 10-bit addressing */
-#define	STANDARD_MODE		(1 << 1)	/* standard mode */
-#define FAST_MODE		(2 << 1)	/* fast mode */
-#define HIGH_MODE		(3 << 1)	/* high speed mode */
-#define	MASTER_EN		(1 << 0)	/* Master mode */
-
-/* Target address register */
-#define IC_TAR			0x04
-#define IC_TAR_10BIT_ADDR	(1 << 12)	/* 10-bit addressing */
-#define IC_TAR_SPECIAL		(1 << 11)	/* Perform special I2C cmd */
-#define IC_TAR_GC_OR_START	(1 << 10)	/* 0: Gerneral Call Address */
-						/* 1: START BYTE */
-/* Slave Address Register */
-#define IC_SAR			0x08		/* Not used in Master mode */
-
-/* High Speed Master Mode Code Address Register */
-#define IC_HS_MADDR		0x0c
-
-/* Rx/Tx Data Buffer and Command Register */
-#define IC_DATA_CMD		0x10
-#define IC_RD			(1 << 8)	/* 1: Read 0: Write */
-
-/* Standard Speed Clock SCL High Count Register */
-#define IC_SS_SCL_HCNT		0x14
-
-/* Standard Speed Clock SCL Low Count Register */
-#define IC_SS_SCL_LCNT		0x18
-
-/* Fast Speed Clock SCL High Count Register */
-#define IC_FS_SCL_HCNT		0x1c
-
-/* Fast Spedd Clock SCL Low Count Register */
-#define IC_FS_SCL_LCNT		0x20
-
-/* High Speed Clock SCL High Count Register */
-#define IC_HS_SCL_HCNT		0x24
-
-/* High Speed Clock SCL Low Count Register */
-#define IC_HS_SCL_LCNT		0x28
-
-/* Interrupt Status Register */
-#define IC_INTR_STAT		0x2c		/* Read only */
-#define R_GEN_CALL		(1 << 11)
-#define R_START_DET		(1 << 10)
-#define R_STOP_DET		(1 << 9)
-#define R_ACTIVITY		(1 << 8)
-#define R_RX_DONE		(1 << 7)
-#define	R_TX_ABRT		(1 << 6)
-#define R_RD_REQ		(1 << 5)
-#define R_TX_EMPTY		(1 << 4)
-#define R_TX_OVER		(1 << 3)
-#define	R_RX_FULL		(1 << 2)
-#define	R_RX_OVER		(1 << 1)
-#define R_RX_UNDER		(1 << 0)
-
-/* Interrupt Mask Register */
-#define IC_INTR_MASK		0x30		/* Read and Write */
-#define M_GEN_CALL		(1 << 11)
-#define M_START_DET		(1 << 10)
-#define M_STOP_DET		(1 << 9)
-#define M_ACTIVITY		(1 << 8)
-#define M_RX_DONE		(1 << 7)
-#define	M_TX_ABRT		(1 << 6)
-#define M_RD_REQ		(1 << 5)
-#define M_TX_EMPTY		(1 << 4)
-#define M_TX_OVER		(1 << 3)
-#define	M_RX_FULL		(1 << 2)
-#define	M_RX_OVER		(1 << 1)
-#define M_RX_UNDER		(1 << 0)
-
-/* Raw Interrupt Status Register */
-#define IC_RAW_INTR_STAT	0x34		/* Read Only */
-#define GEN_CALL		(1 << 11)	/* General call */
-#define START_DET		(1 << 10)	/* (RE)START occurred */
-#define STOP_DET		(1 << 9)	/* STOP occurred */
-#define ACTIVITY		(1 << 8)	/* Bus busy */
-#define RX_DONE			(1 << 7)	/* Not used in Master mode */
-#define	TX_ABRT			(1 << 6)	/* Transmit Abort */
-#define RD_REQ			(1 << 5)	/* Not used in Master mode */
-#define TX_EMPTY		(1 << 4)	/* TX FIFO <= threshold */
-#define TX_OVER			(1 << 3)	/* TX FIFO overflow */
-#define	RX_FULL			(1 << 2)	/* RX FIFO >= threshold */
-#define	RX_OVER			(1 << 1)	/* RX FIFO overflow */
-#define RX_UNDER		(1 << 0)	/* RX FIFO empty */
-
-/* Receive FIFO Threshold Register */
-#define IC_RX_TL		0x38
-
-/* Transmit FIFO Treshold Register */
-#define IC_TX_TL		0x3c
-
-/* Clear Combined and Individual Interrupt Register */
-#define IC_CLR_INTR		0x40
-#define CLR_INTR		(1 << 0)
-
-/* Clear RX_UNDER Interrupt Register */
-#define IC_CLR_RX_UNDER		0x44
-#define CLR_RX_UNDER		(1 << 0)
-
-/* Clear RX_OVER Interrupt Register */
-#define IC_CLR_RX_OVER		0x48
-#define CLR_RX_OVER		(1 << 0)
-
-/* Clear TX_OVER Interrupt Register */
-#define IC_CLR_TX_OVER		0x4c
-#define CLR_TX_OVER		(1 << 0)
-
-#define IC_CLR_RD_REQ		0x50
-
-/* Clear TX_ABRT Interrupt Register */
-#define IC_CLR_TX_ABRT		0x54
-#define CLR_TX_ABRT		(1 << 0)
-#define IC_CLR_RX_DONE		0x58
-
-/* Clear ACTIVITY Interrupt Register */
-#define IC_CLR_ACTIVITY		0x5c
-#define CLR_ACTIVITY		(1 << 0)
-
-/* Clear STOP_DET Interrupt Register */
-#define IC_CLR_STOP_DET		0x60
-#define CLR_STOP_DET		(1 << 0)
-
-/* Clear START_DET Interrupt Register */
-#define IC_CLR_START_DET	0x64
-#define CLR_START_DET		(1 << 0)
-
-/* Clear GEN_CALL Interrupt Register */
-#define IC_CLR_GEN_CALL		0x68
-#define CLR_GEN_CALL		(1 << 0)
-
-/* Enable Register */
-#define IC_ENABLE		0x6c
-#define ENABLE			(1 << 0)
-
-/* Status Register */
-#define IC_STATUS		0x70		/* Read Only */
-#define STAT_SLV_ACTIVITY	(1 << 6)	/* Slave not in idle */
-#define STAT_MST_ACTIVITY	(1 << 5)	/* Master not in idle */
-#define STAT_RFF		(1 << 4)	/* RX FIFO Full */
-#define STAT_RFNE		(1 << 3)	/* RX FIFO Not Empty */
-#define STAT_TFE		(1 << 2)	/* TX FIFO Empty */
-#define STAT_TFNF		(1 << 1)	/* TX FIFO Not Full */
-#define STAT_ACTIVITY		(1 << 0)	/* Activity Status */
-
-/* Transmit FIFO Level Register */
-#define IC_TXFLR		0x74		/* Read Only */
-#define TXFLR			(1 << 0)	/* TX FIFO level */
-
-/* Receive FIFO Level Register */
-#define IC_RXFLR		0x78		/* Read Only */
-#define RXFLR			(1 << 0)	/* RX FIFO level */
-
-/* Transmit Abort Source Register */
-#define IC_TX_ABRT_SOURCE	0x80
-#define ABRT_SLVRD_INTX		(1 << 15)
-#define ABRT_SLV_ARBLOST	(1 << 14)
-#define ABRT_SLVFLUSH_TXFIFO	(1 << 13)
-#define	ARB_LOST		(1 << 12)
-#define ABRT_MASTER_DIS		(1 << 11)
-#define ABRT_10B_RD_NORSTRT	(1 << 10)
-#define ABRT_SBYTE_NORSTRT	(1 << 9)
-#define ABRT_HS_NORSTRT		(1 << 8)
-#define ABRT_SBYTE_ACKDET	(1 << 7)
-#define ABRT_HS_ACKDET		(1 << 6)
-#define ABRT_GCALL_READ		(1 << 5)
-#define ABRT_GCALL_NOACK	(1 << 4)
-#define ABRT_TXDATA_NOACK	(1 << 3)
-#define ABRT_10ADDR2_NOACK	(1 << 2)
-#define ABRT_10ADDR1_NOACK	(1 << 1)
-#define ABRT_7B_ADDR_NOACK	(1 << 0)
-
-/* Enable Status Register */
-#define IC_ENABLE_STATUS	0x9c
-#define IC_EN			(1 << 0)	/* I2C in an enabled state */
-
-/* Component Parameter Register 1*/
-#define IC_COMP_PARAM_1		0xf4
-#define APB_DATA_WIDTH		(0x3 << 0)
-
-/* added by xiaolin --begin */
-#define SS_MIN_SCL_HIGH         4000
-#define SS_MIN_SCL_LOW          4700
-#define FS_MIN_SCL_HIGH         600
-#define FS_MIN_SCL_LOW          1300
-#define HS_MIN_SCL_HIGH_100PF   60
-#define HS_MIN_SCL_LOW_100PF    120
-
-#define STANDARD		0
-#define FAST			1
-#define HIGH			2
-
-#define NUM_SPEEDS		3
-
-static int speed_mode[6] = {
-	FAST,
-	FAST,
-	FAST,
-	STANDARD,
-	FAST,
-	FAST
-};
-
-static int ctl_num = 6;
-module_param_array(speed_mode, int, &ctl_num, S_IRUGO);
-MODULE_PARM_DESC(speed_mode, "Set the speed of the i2c interface (0-2)");
-
-/**
- * intel_mid_i2c_disable - Disable I2C controller
- * @adap: struct pointer to i2c_adapter
- *
- * Return Value:
- * 0		success
- * -EBUSY	if device is busy
- * -ETIMEDOUT	if i2c cannot be disabled within the given time
- *
- * I2C bus state should be checked prior to disabling the hardware. If bus is
- * not in idle state, an errno is returned. Write "0" to IC_ENABLE to disable
- * I2C controller.
- */
-static int intel_mid_i2c_disable(struct i2c_adapter *adap)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int err = 0;
-	int count = 0;
-	int ret1, ret2;
-	static const u16 delay[NUM_SPEEDS] = {100, 25, 3};
-
-	/* Set IC_ENABLE to 0 */
-	writel(0, i2c->base + IC_ENABLE);
-
-	/* Check if device is busy */
-	dev_dbg(&adap->dev, "mrst i2c disable\n");
-	while ((ret1 = readl(i2c->base + IC_ENABLE_STATUS) & 0x1)
-		|| (ret2 = readl(i2c->base + IC_STATUS) & 0x1)) {
-		udelay(delay[i2c->speed]);
-		writel(0, i2c->base + IC_ENABLE);
-		dev_dbg(&adap->dev, "i2c is busy, count is %d speed %d\n",
-			count, i2c->speed);
-		if (count++ > 10) {
-			err = -ETIMEDOUT;
-			break;
-		}
-	}
-
-	/* Clear all interrupts */
-	readl(i2c->base + IC_CLR_INTR);
-	readl(i2c->base + IC_CLR_STOP_DET);
-	readl(i2c->base + IC_CLR_START_DET);
-	readl(i2c->base + IC_CLR_ACTIVITY);
-	readl(i2c->base + IC_CLR_TX_ABRT);
-	readl(i2c->base + IC_CLR_RX_OVER);
-	readl(i2c->base + IC_CLR_RX_UNDER);
-	readl(i2c->base + IC_CLR_TX_OVER);
-	readl(i2c->base + IC_CLR_RX_DONE);
-	readl(i2c->base + IC_CLR_GEN_CALL);
-
-	/* Disable all interupts */
-	writel(0x0000, i2c->base + IC_INTR_MASK);
-
-	return err;
-}
-
-/**
- * intel_mid_i2c_hwinit - Initialize the I2C hardware registers
- * @dev: pci device struct pointer
- *
- * This function will be called in intel_mid_i2c_probe() before device
- * registration.
- *
- * Return Values:
- * 0		success
- * -EBUSY	i2c cannot be disabled
- * -ETIMEDOUT	i2c cannot be disabled
- * -EFAULT	If APB data width is not 32-bit wide
- *
- * I2C should be disabled prior to other register operation. If failed, an
- * errno is returned. Mask and Clear all interrpts, this should be done at
- * first.  Set common registers which will not be modified during normal
- * transfers, including: control register, FIFO threshold and clock freq.
- * Check APB data width at last.
- */
-static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c)
-{
-	int err;
-
-	static const u16 hcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
-		{ 0x75,  0x15, 0x07 },
-		{ 0x04c,  0x10, 0x06 }
-	};
-	static const u16 lcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
-		{ 0x7C,  0x21, 0x0E },
-		{ 0x053, 0x19, 0x0F }
-	};
-
-	/* Disable i2c first */
-	err = intel_mid_i2c_disable(&i2c->adap);
-	if (err)
-		return err;
-
-	/*
-	 * Setup clock frequency and speed mode
-	 * Enable restart condition,
-	 * enable master FSM, disable slave FSM,
-	 * use target address when initiating transfer
-	 */
-
-	writel((i2c->speed + 1) << 1 | SLV_DIS | RESTART | MASTER_EN,
-		i2c->base + IC_CON);
-	writel(hcnt[i2c->platform][i2c->speed],
-		i2c->base + (IC_SS_SCL_HCNT + (i2c->speed << 3)));
-	writel(lcnt[i2c->platform][i2c->speed],
-		i2c->base + (IC_SS_SCL_LCNT + (i2c->speed << 3)));
-
-	/* Set tranmit & receive FIFO threshold to zero */
-	writel(0x0, i2c->base + IC_RX_TL);
-	writel(0x0, i2c->base + IC_TX_TL);
-
-	return 0;
-}
-
-/**
- * intel_mid_i2c_func - Return the supported three I2C operations.
- * @adapter: i2c_adapter struct pointer
- */
-static u32 intel_mid_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
-}
-
-/**
- * intel_mid_i2c_address_neq - To check if the addresses for different i2c messages
- * are equal.
- * @p1: first i2c_msg
- * @p2: second i2c_msg
- *
- * Return Values:
- * 0	 if addresses are equal
- * 1	 if not equal
- *
- * Within a single transfer, the I2C client may need to send its address more
- * than once. So a check if the addresses match is needed.
- */
-static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
-				       const struct i2c_msg *p2)
-{
-	if (p1->addr != p2->addr)
-		return 1;
-	if ((p1->flags ^ p2->flags) & I2C_M_TEN)
-		return 1;
-	return 0;
-}
-
-/**
- * intel_mid_i2c_abort - To handle transfer abortions and print error messages.
- * @adap: i2c_adapter struct pointer
- *
- * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
- * distingushed. At present, no circumstances have been found out that
- * multiple errors would be occurred simutaneously, so we simply use the
- * register value directly.
- *
- * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
- * a few extra steps)
- */
-static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)
-{
-	/* Read about source register */
-	int abort = i2c->abort;
-	struct i2c_adapter *adap = &i2c->adap;
-
-	/* Single transfer error check:
-	 * According to databook, TX/RX FIFOs would be flushed when
-	 * the abort interrupt occurred.
-	 */
-	if (abort & ABRT_MASTER_DIS)
-		dev_err(&adap->dev,
-		"initiate master operation with master mode disabled.\n");
-	if (abort & ABRT_10B_RD_NORSTRT)
-		dev_err(&adap->dev,
-	"RESTART disabled and master sent READ cmd in 10-bit addressing.\n");
-
-	if (abort & ABRT_SBYTE_NORSTRT) {
-		dev_err(&adap->dev,
-		"RESTART disabled and user is trying to send START byte.\n");
-		writel(~ABRT_SBYTE_NORSTRT, i2c->base + IC_TX_ABRT_SOURCE);
-		writel(RESTART, i2c->base + IC_CON);
-		writel(~IC_TAR_SPECIAL, i2c->base + IC_TAR);
-	}
-
-	if (abort & ABRT_SBYTE_ACKDET)
-		dev_err(&adap->dev,
-			"START byte was not acknowledged.\n");
-	if (abort & ABRT_TXDATA_NOACK)
-		dev_dbg(&adap->dev,
-			"No acknowledgement received from slave.\n");
-	if (abort & ABRT_10ADDR2_NOACK)
-		dev_dbg(&adap->dev,
-	"The 2nd address byte of the 10-bit address was not acknowledged.\n");
-	if (abort & ABRT_10ADDR1_NOACK)
-		dev_dbg(&adap->dev,
-	"The 1st address byte of 10-bit address was not acknowledged.\n");
-	if (abort & ABRT_7B_ADDR_NOACK)
-		dev_dbg(&adap->dev,
-			"I2C slave device not acknowledged.\n");
-
-	/* Clear TX_ABRT bit */
-	readl(i2c->base + IC_CLR_TX_ABRT);
-	i2c->status = STATUS_XFER_ABORT;
-}
-
-/**
- * xfer_read - Internal function to implement master read transfer.
- * @adap: i2c_adapter struct pointer
- * @buf: buffer in i2c_msg
- * @length: number of bytes to be read
- *
- * Return Values:
- * 0		if the read transfer succeeds
- * -ETIMEDOUT	if cannot read the "raw" interrupt register
- * -EINVAL	if a transfer abort occurred
- *
- * For every byte, a "READ" command will be loaded into IC_DATA_CMD prior to
- * data transfer. The actual "read" operation will be performed if an RX_FULL
- * interrupt occurred.
- *
- * Note there may be two interrupt signals captured, one should read
- * IC_RAW_INTR_STAT to separate between errors and actual data.
- */
-static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int i = length;
-	int err;
-
-	if (length >= 256) {
-		dev_err(&adap->dev,
-			"I2C FIFO cannot support larger than 256 bytes\n");
-		return -EMSGSIZE;
-	}
-
-	INIT_COMPLETION(i2c->complete);
-
-	readl(i2c->base + IC_CLR_INTR);
-	writel(0x0044, i2c->base + IC_INTR_MASK);
-
-	i2c->status = STATUS_READ_START;
-
-	while (i--)
-		writel(IC_RD, i2c->base + IC_DATA_CMD);
-
-	i2c->status = STATUS_READ_START;
-	err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
-	if (!err) {
-		dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
-		intel_mid_i2c_hwinit(i2c);
-		return -ETIMEDOUT;
-	}
-	if (i2c->status == STATUS_READ_SUCCESS)
-		return 0;
-	else
-		return -EIO;
-}
-
-/**
- * xfer_write - Internal function to implement master write transfer.
- * @adap: i2c_adapter struct pointer
- * @buf: buffer in i2c_msg
- * @length: number of bytes to be read
- *
- * Return Values:
- * 0	if the read transfer succeeds
- * -ETIMEDOUT	if we cannot read the "raw" interrupt register
- * -EINVAL	if a transfer abort occurred
- *
- * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
- * data transfer. The actual "write" operation will be performed when the
- * RX_FULL interrupt signal occurs.
- *
- * Note there may be two interrupt signals captured, one should read
- * IC_RAW_INTR_STAT to separate between errors and actual data.
- */
-static int xfer_write(struct i2c_adapter *adap,
-		      unsigned char *buf, int length)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int i, err;
-
-	if (length >= 256) {
-		dev_err(&adap->dev,
-			"I2C FIFO cannot support larger than 256 bytes\n");
-		return -EMSGSIZE;
-	}
-
-	INIT_COMPLETION(i2c->complete);
-
-	readl(i2c->base + IC_CLR_INTR);
-	writel(0x0050, i2c->base + IC_INTR_MASK);
-
-	i2c->status = STATUS_WRITE_START;
-	for (i = 0; i < length; i++)
-		writel((u16)(*(buf + i)), i2c->base + IC_DATA_CMD);
-
-	i2c->status = STATUS_WRITE_START;
-	err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
-	if (!err) {
-		dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
-		intel_mid_i2c_hwinit(i2c);
-		return -ETIMEDOUT;
-	} else {
-		if (i2c->status == STATUS_WRITE_SUCCESS)
-			return 0;
-		else
-			return -EIO;
-	}
-}
-
-static int intel_mid_i2c_setup(struct i2c_adapter *adap,  struct i2c_msg *pmsg)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int err;
-	u32 reg;
-	u32 bit_mask;
-	u32 mode;
-
-	/* Disable device first */
-	err = intel_mid_i2c_disable(adap);
-	if (err) {
-		dev_err(&adap->dev,
-			"Cannot disable i2c controller, timeout\n");
-		return err;
-	}
-
-	mode = (1 + i2c->speed) << 1;
-	/* set the speed mode */
-	reg = readl(i2c->base + IC_CON);
-	if ((reg & 0x06) != mode) {
-		dev_dbg(&adap->dev, "set mode %d\n", i2c->speed);
-		writel((reg & ~0x6) | mode, i2c->base + IC_CON);
-	}
-
-	reg = readl(i2c->base + IC_CON);
-	/* use 7-bit addressing */
-	if (pmsg->flags & I2C_M_TEN) {
-		if ((reg & ADDR_10BIT) != ADDR_10BIT) {
-			dev_dbg(&adap->dev, "set i2c 10 bit address mode\n");
-			writel(reg | ADDR_10BIT, i2c->base + IC_CON);
-		}
-	} else {
-		if ((reg & ADDR_10BIT) != 0x0) {
-			dev_dbg(&adap->dev, "set i2c 7 bit address mode\n");
-			writel(reg & ~ADDR_10BIT, i2c->base + IC_CON);
-		}
-	}
-	/* enable restart conditions */
-	reg = readl(i2c->base + IC_CON);
-	if ((reg & RESTART) != RESTART) {
-		dev_dbg(&adap->dev, "enable restart conditions\n");
-		writel(reg | RESTART, i2c->base + IC_CON);
-	}
-
-	/* enable master FSM */
-	reg = readl(i2c->base + IC_CON);
-	dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
-	writel(reg | MASTER_EN, i2c->base + IC_CON);
-	if ((reg & SLV_DIS) != SLV_DIS) {
-		dev_dbg(&adap->dev, "enable master FSM\n");
-		writel(reg | SLV_DIS, i2c->base + IC_CON);
-		dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
-	}
-
-	/* use target address when initiating transfer */
-	reg = readl(i2c->base + IC_TAR);
-	bit_mask = IC_TAR_SPECIAL | IC_TAR_GC_OR_START;
-
-	if ((reg & bit_mask) != 0x0) {
-		dev_dbg(&adap->dev,
-	 "WR: use target address when intiating transfer, i2c_tx_target\n");
-		writel(reg & ~bit_mask, i2c->base + IC_TAR);
-	}
-
-	/* set target address to the I2C slave address */
-	dev_dbg(&adap->dev,
-		"set target address to the I2C slave address, addr is %x\n",
-			pmsg->addr);
-	writel(pmsg->addr | (pmsg->flags & I2C_M_TEN ? IC_TAR_10BIT_ADDR : 0),
-		i2c->base + IC_TAR);
-
-	/* Enable I2C controller */
-	writel(ENABLE, i2c->base + IC_ENABLE);
-
-	return 0;
-}
-
-/**
- * intel_mid_i2c_xfer - Main master transfer routine.
- * @adap: i2c_adapter struct pointer
- * @pmsg: i2c_msg struct pointer
- * @num: number of i2c_msg
- *
- * Return Values:
- * +		number of messages transferred
- * -ETIMEDOUT	If cannot disable I2C controller or read IC_STATUS
- * -EINVAL	If the address in i2c_msg is invalid
- *
- * This function will be registered in i2c-core and exposed to external
- * I2C clients.
- * 1. Disable I2C controller
- * 2. Unmask three interrupts: RX_FULL, TX_EMPTY, TX_ABRT
- * 3. Check if address in i2c_msg is valid
- * 4. Enable I2C controller
- * 5. Perform real transfer (call xfer_read or xfer_write)
- * 6. Wait until the current transfer is finished (check bus state)
- * 7. Mask and clear all interrupts
- */
-static int intel_mid_i2c_xfer(struct i2c_adapter *adap,
-			 struct i2c_msg *pmsg,
-			 int num)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int i, err = 0;
-
-	/* if number of messages equal 0*/
-	if (num == 0)
-		return 0;
-
-	pm_runtime_get(i2c->dev);
-
-	mutex_lock(&i2c->lock);
-	dev_dbg(&adap->dev, "intel_mid_i2c_xfer, process %d msg(s)\n", num);
-	dev_dbg(&adap->dev, "slave address is %x\n", pmsg->addr);
-
-
-	if (i2c->status != STATUS_IDLE) {
-		dev_err(&adap->dev, "Adapter %d in transfer/standby\n",
-								adap->nr);
-		mutex_unlock(&i2c->lock);
-		pm_runtime_put(i2c->dev);
-		return -1;
-	}
-
-
-	for (i = 1; i < num; i++) {
-		/* Message address equal? */
-		if (unlikely(intel_mid_i2c_address_neq(&pmsg[0], &pmsg[i]))) {
-			dev_err(&adap->dev, "Invalid address in msg[%d]\n", i);
-			mutex_unlock(&i2c->lock);
-			pm_runtime_put(i2c->dev);
-			return -EINVAL;
-		}
-	}
-
-	if (intel_mid_i2c_setup(adap, pmsg)) {
-		mutex_unlock(&i2c->lock);
-		pm_runtime_put(i2c->dev);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < num; i++) {
-		i2c->msg = pmsg;
-		i2c->status = STATUS_IDLE;
-		/* Read or Write */
-		if (pmsg->flags & I2C_M_RD) {
-			dev_dbg(&adap->dev, "I2C_M_RD\n");
-			err = xfer_read(adap, pmsg->buf, pmsg->len);
-		} else {
-			dev_dbg(&adap->dev, "I2C_M_WR\n");
-			err = xfer_write(adap, pmsg->buf, pmsg->len);
-		}
-		if (err < 0)
-			break;
-		dev_dbg(&adap->dev, "msg[%d] transfer complete\n", i);
-		pmsg++;		/* next message */
-	}
-
-	/* Mask interrupts */
-	writel(0x0000, i2c->base + IC_INTR_MASK);
-	/* Clear all interrupts */
-	readl(i2c->base + IC_CLR_INTR);
-
-	i2c->status = STATUS_IDLE;
-	mutex_unlock(&i2c->lock);
-	pm_runtime_put(i2c->dev);
-
-	return err;
-}
-
-static int intel_mid_i2c_runtime_suspend(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
-	struct i2c_adapter *adap = to_i2c_adapter(dev);
-	int err;
-
-	if (i2c->status != STATUS_IDLE)
-		return -1;
-
-	intel_mid_i2c_disable(adap);
-
-	err = pci_save_state(pdev);
-	if (err) {
-		dev_err(dev, "pci_save_state failed\n");
-		return err;
-	}
-
-	err = pci_set_power_state(pdev, PCI_D3hot);
-	if (err) {
-		dev_err(dev, "pci_set_power_state failed\n");
-		return err;
-	}
-	i2c->status = STATUS_STANDBY;
-
-	return 0;
-}
-
-static int intel_mid_i2c_runtime_resume(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
-	int err;
-
-	if (i2c->status != STATUS_STANDBY)
-		return 0;
-
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	err = pci_enable_device(pdev);
-	if (err) {
-		dev_err(dev, "pci_enable_device failed\n");
-		return err;
-	}
-
-	i2c->status = STATUS_IDLE;
-
-	intel_mid_i2c_hwinit(i2c);
-	return err;
-}
-
-static void i2c_isr_read(struct intel_mid_i2c_private *i2c)
-{
-	struct i2c_msg *msg = i2c->msg;
-	int rx_num;
-	u32 len;
-	u8 *buf;
-
-	if (!(msg->flags & I2C_M_RD))
-		return;
-
-	if (i2c->status != STATUS_READ_IN_PROGRESS) {
-		len = msg->len;
-		buf = msg->buf;
-	} else {
-		len = i2c->rx_buf_len;
-		buf = i2c->rx_buf;
-	}
-
-	rx_num = readl(i2c->base + IC_RXFLR);
-
-	for (; len > 0 && rx_num > 0; len--, rx_num--)
-		*buf++ = readl(i2c->base + IC_DATA_CMD);
-
-	if (len > 0) {
-		i2c->status = STATUS_READ_IN_PROGRESS;
-		i2c->rx_buf_len = len;
-		i2c->rx_buf = buf;
-	} else
-		i2c->status = STATUS_READ_SUCCESS;
-
-	return;
-}
-
-static irqreturn_t intel_mid_i2c_isr(int this_irq, void *dev)
-{
-	struct intel_mid_i2c_private *i2c = dev;
-	u32 stat = readl(i2c->base + IC_INTR_STAT);
-
-	if (!stat)
-		return IRQ_NONE;
-
-	dev_dbg(&i2c->adap.dev, "%s, stat = 0x%x\n", __func__, stat);
-	stat &= 0x54;
-
-	if (i2c->status != STATUS_WRITE_START &&
-	    i2c->status != STATUS_READ_START &&
-	    i2c->status != STATUS_READ_IN_PROGRESS)
-		goto err;
-
-	if (stat & TX_ABRT)
-		i2c->abort = readl(i2c->base + IC_TX_ABRT_SOURCE);
-
-	readl(i2c->base + IC_CLR_INTR);
-
-	if (stat & TX_ABRT) {
-		intel_mid_i2c_abort(i2c);
-		goto exit;
-	}
-
-	if (stat & RX_FULL) {
-		i2c_isr_read(i2c);
-		goto exit;
-	}
-
-	if (stat & TX_EMPTY) {
-		if (readl(i2c->base + IC_STATUS) & 0x4)
-			i2c->status = STATUS_WRITE_SUCCESS;
-	}
-
-exit:
-	if (i2c->status == STATUS_READ_SUCCESS ||
-	    i2c->status == STATUS_WRITE_SUCCESS ||
-	    i2c->status == STATUS_XFER_ABORT) {
-		/* Clear all interrupts */
-		readl(i2c->base + IC_CLR_INTR);
-		/* Mask interrupts */
-		writel(0, i2c->base + IC_INTR_MASK);
-		complete(&i2c->complete);
-	}
-err:
-	return IRQ_HANDLED;
-}
-
-static struct i2c_algorithm intel_mid_i2c_algorithm = {
-	.master_xfer	= intel_mid_i2c_xfer,
-	.functionality	= intel_mid_i2c_func,
-};
-
-
-static const struct dev_pm_ops intel_mid_i2c_pm_ops = {
-	.runtime_suspend = intel_mid_i2c_runtime_suspend,
-	.runtime_resume = intel_mid_i2c_runtime_resume,
-};
-
-/**
- * intel_mid_i2c_probe - I2C controller initialization routine
- * @dev: pci device
- * @id: device id
- *
- * Return Values:
- * 0		success
- * -ENODEV	If cannot allocate pci resource
- * -ENOMEM	If the register base remapping failed, or
- *		if kzalloc failed
- *
- * Initialization steps:
- * 1. Request for PCI resource
- * 2. Remap the start address of PCI resource to register base
- * 3. Request for device memory region
- * 4. Fill in the struct members of intel_mid_i2c_private
- * 5. Call intel_mid_i2c_hwinit() for hardware initialization
- * 6. Register I2C adapter in i2c-core
- */
-static int intel_mid_i2c_probe(struct pci_dev *dev,
-				    const struct pci_device_id *id)
-{
-	struct intel_mid_i2c_private *mrst;
-	unsigned long start, len;
-	int err, busnum;
-	void __iomem *base = NULL;
-
-	dev_dbg(&dev->dev, "Get into probe function for I2C\n");
-	err = pci_enable_device(dev);
-	if (err) {
-		dev_err(&dev->dev, "Failed to enable I2C PCI device (%d)\n",
-			err);
-		goto exit;
-	}
-
-	/* Determine the address of the I2C area */
-	start = pci_resource_start(dev, 0);
-	len = pci_resource_len(dev, 0);
-	if (!start || len == 0) {
-		dev_err(&dev->dev, "base address not set\n");
-		err = -ENODEV;
-		goto exit;
-	}
-	dev_dbg(&dev->dev, "%s i2c resource start 0x%lx, len=%ld\n",
-		PLATFORM, start, len);
-
-	err = pci_request_region(dev, 0, DRIVER_NAME);
-	if (err) {
-		dev_err(&dev->dev, "failed to request I2C region "
-			"0x%lx-0x%lx\n", start,
-			(unsigned long)pci_resource_end(dev, 0));
-		goto exit;
-	}
-
-	base = ioremap_nocache(start, len);
-	if (!base) {
-		dev_err(&dev->dev, "I/O memory remapping failed\n");
-		err = -ENOMEM;
-		goto fail0;
-	}
-
-	/* Allocate the per-device data structure, intel_mid_i2c_private */
-	mrst = kzalloc(sizeof(struct intel_mid_i2c_private), GFP_KERNEL);
-	if (mrst == NULL) {
-		dev_err(&dev->dev, "can't allocate interface\n");
-		err = -ENOMEM;
-		goto fail1;
-	}
-
-	/* Initialize struct members */
-	snprintf(mrst->adap.name, sizeof(mrst->adap.name),
-		"Intel MID I2C at %lx", start);
-	mrst->adap.owner = THIS_MODULE;
-	mrst->adap.algo = &intel_mid_i2c_algorithm;
-	mrst->adap.dev.parent = &dev->dev;
-	mrst->dev = &dev->dev;
-	mrst->base = base;
-	mrst->speed = STANDARD;
-	mrst->abort = 0;
-	mrst->rx_buf_len = 0;
-	mrst->status = STATUS_IDLE;
-
-	pci_set_drvdata(dev, mrst);
-	i2c_set_adapdata(&mrst->adap, mrst);
-
-	mrst->adap.nr = busnum = id->driver_data;
-	if (dev->device <= 0x0804)
-		mrst->platform = MOORESTOWN;
-	else
-		mrst->platform = MEDFIELD;
-
-	dev_dbg(&dev->dev, "I2C%d\n", busnum);
-
-	if (ctl_num > busnum) {
-		if (speed_mode[busnum] < 0 || speed_mode[busnum] >= NUM_SPEEDS)
-			dev_warn(&dev->dev, "invalid speed %d ignored.\n",
-							speed_mode[busnum]);
-		else
-			mrst->speed = speed_mode[busnum];
-	}
-
-	/* Initialize i2c controller */
-	err = intel_mid_i2c_hwinit(mrst);
-	if (err < 0) {
-		dev_err(&dev->dev, "I2C interface initialization failed\n");
-		goto fail2;
-	}
-
-	mutex_init(&mrst->lock);
-	init_completion(&mrst->complete);
-
-	/* Clear all interrupts */
-	readl(mrst->base + IC_CLR_INTR);
-	writel(0x0000, mrst->base + IC_INTR_MASK);
-
-	err = request_irq(dev->irq, intel_mid_i2c_isr, IRQF_SHARED,
-					mrst->adap.name, mrst);
-	if (err) {
-		dev_err(&dev->dev, "Failed to request IRQ for I2C controller: "
-			"%s", mrst->adap.name);
-		goto fail2;
-	}
-
-	/* Adapter registration */
-	err = i2c_add_numbered_adapter(&mrst->adap);
-	if (err) {
-		dev_err(&dev->dev, "Adapter %s registration failed\n",
-			mrst->adap.name);
-		goto fail3;
-	}
-
-	dev_dbg(&dev->dev, "%s I2C bus %d driver bind success.\n",
-		(mrst->platform == MOORESTOWN) ? "Moorestown" : "Medfield",
-		busnum);
-
-	pm_runtime_enable(&dev->dev);
-	return 0;
-
-fail3:
-	free_irq(dev->irq, mrst);
-fail2:
-	kfree(mrst);
-fail1:
-	iounmap(base);
-fail0:
-	pci_release_region(dev, 0);
-exit:
-	return err;
-}
-
-static void intel_mid_i2c_remove(struct pci_dev *dev)
-{
-	struct intel_mid_i2c_private *mrst = pci_get_drvdata(dev);
-	intel_mid_i2c_disable(&mrst->adap);
-	i2c_del_adapter(&mrst->adap);
-
-	free_irq(dev->irq, mrst);
-	iounmap(mrst->base);
-	kfree(mrst);
-	pci_release_region(dev, 0);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(intel_mid_i2c_ids) = {
-	/* Moorestown */
-	{ PCI_VDEVICE(INTEL, 0x0802), 0 },
-	{ PCI_VDEVICE(INTEL, 0x0803), 1 },
-	{ PCI_VDEVICE(INTEL, 0x0804), 2 },
-	/* Medfield */
-	{ PCI_VDEVICE(INTEL, 0x0817), 3,},
-	{ PCI_VDEVICE(INTEL, 0x0818), 4 },
-	{ PCI_VDEVICE(INTEL, 0x0819), 5 },
-	{ PCI_VDEVICE(INTEL, 0x082C), 0 },
-	{ PCI_VDEVICE(INTEL, 0x082D), 1 },
-	{ PCI_VDEVICE(INTEL, 0x082E), 2 },
-	{ 0,}
-};
-MODULE_DEVICE_TABLE(pci, intel_mid_i2c_ids);
-
-static struct pci_driver intel_mid_i2c_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= intel_mid_i2c_ids,
-	.probe		= intel_mid_i2c_probe,
-	.remove		= intel_mid_i2c_remove,
-};
-
-module_pci_driver(intel_mid_i2c_driver);
-
-MODULE_AUTHOR("Ba Zheng <zheng.ba@intel.com>");
-MODULE_DESCRIPTION("I2C driver for Moorestown Platform");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(VERSION);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index bc993331c69..dd24aa0424a 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -176,7 +176,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
 		interrupted = wait_event_interruptible_timeout (
 			iop3xx_adap->waitq,
 			(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
-			1 * HZ;
+			1 * HZ
 			);
 		if ((rc = iop3xx_i2c_error(sr)) < 0) {
 			*status = sr;
diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c
new file mode 100644
index 00000000000..ccec916bc3e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-kempld.c
@@ -0,0 +1,410 @@
+/*
+ * I2C bus driver for Kontron COM modules
+ *
+ * Copyright (c) 2010-2013 Kontron Europe GmbH
+ * Author: Michael Brunner <michael.brunner@kontron.com>
+ *
+ * The driver is based on the i2c-ocores driver by Peter Korsgaard.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/mfd/kempld.h>
+
+#define KEMPLD_I2C_PRELOW	0x0b
+#define KEMPLD_I2C_PREHIGH	0x0c
+#define KEMPLD_I2C_DATA		0x0e
+
+#define KEMPLD_I2C_CTRL		0x0d
+#define I2C_CTRL_IEN		0x40
+#define I2C_CTRL_EN		0x80
+
+#define KEMPLD_I2C_STAT		0x0f
+#define I2C_STAT_IF		0x01
+#define I2C_STAT_TIP		0x02
+#define I2C_STAT_ARBLOST	0x20
+#define I2C_STAT_BUSY		0x40
+#define I2C_STAT_NACK		0x80
+
+#define KEMPLD_I2C_CMD		0x0f
+#define I2C_CMD_START		0x91
+#define I2C_CMD_STOP		0x41
+#define I2C_CMD_READ		0x21
+#define I2C_CMD_WRITE		0x11
+#define I2C_CMD_READ_ACK	0x21
+#define I2C_CMD_READ_NACK	0x29
+#define I2C_CMD_IACK		0x01
+
+#define KEMPLD_I2C_FREQ_MAX	2700	/* 2.7 mHz */
+#define KEMPLD_I2C_FREQ_STD	100	/* 100 kHz */
+
+enum {
+	STATE_DONE = 0,
+	STATE_INIT,
+	STATE_ADDR,
+	STATE_ADDR10,
+	STATE_START,
+	STATE_WRITE,
+	STATE_READ,
+	STATE_ERROR,
+};
+
+struct kempld_i2c_data {
+	struct device			*dev;
+	struct kempld_device_data	*pld;
+	struct i2c_adapter		adap;
+	struct i2c_msg			*msg;
+	int				pos;
+	int				nmsgs;
+	int				state;
+	bool				was_active;
+};
+
+static unsigned int bus_frequency = KEMPLD_I2C_FREQ_STD;
+module_param(bus_frequency, uint, 0);
+MODULE_PARM_DESC(bus_frequency, "Set I2C bus frequency in kHz (default="
+				__MODULE_STRING(KEMPLD_I2C_FREQ_STD)")");
+
+static int i2c_bus = -1;
+module_param(i2c_bus, int, 0);
+MODULE_PARM_DESC(i2c_bus, "Set I2C bus number (default=-1 for dynamic assignment)");
+
+static bool i2c_gpio_mux;
+module_param(i2c_gpio_mux, bool, 0);
+MODULE_PARM_DESC(i2c_gpio_mux, "Enable I2C port on GPIO out (default=false)");
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static int kempld_i2c_process(struct kempld_i2c_data *i2c)
+{
+	struct kempld_device_data *pld = i2c->pld;
+	u8 stat = kempld_read8(pld, KEMPLD_I2C_STAT);
+	struct i2c_msg *msg = i2c->msg;
+	u8 addr;
+
+	/* Ready? */
+	if (stat & I2C_STAT_TIP)
+		return -EBUSY;
+
+	if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) {
+		/* Stop has been sent */
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK);
+		if (i2c->state == STATE_ERROR)
+			return -EIO;
+		return 0;
+	}
+
+	/* Error? */
+	if (stat & I2C_STAT_ARBLOST) {
+		i2c->state = STATE_ERROR;
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+		return -EAGAIN;
+	}
+
+	if (i2c->state == STATE_INIT) {
+		if (stat & I2C_STAT_BUSY)
+			return -EBUSY;
+
+		i2c->state = STATE_ADDR;
+	}
+
+	if (i2c->state == STATE_ADDR) {
+		/* 10 bit address? */
+		if (i2c->msg->flags & I2C_M_TEN) {
+			addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6);
+			i2c->state = STATE_ADDR10;
+		} else {
+			addr = (i2c->msg->addr << 1);
+			i2c->state = STATE_START;
+		}
+
+		/* Set read bit if necessary */
+		addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
+
+		kempld_write8(pld, KEMPLD_I2C_DATA, addr);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START);
+
+		return 0;
+	}
+
+	/* Second part of 10 bit addressing */
+	if (i2c->state == STATE_ADDR10) {
+		kempld_write8(pld, KEMPLD_I2C_DATA, i2c->msg->addr & 0xff);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE);
+
+		i2c->state = STATE_START;
+		return 0;
+	}
+
+	if (i2c->state == STATE_START || i2c->state == STATE_WRITE) {
+		i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+
+		if (stat & I2C_STAT_NACK) {
+			i2c->state = STATE_ERROR;
+			kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+			return -ENXIO;
+		}
+	} else {
+		msg->buf[i2c->pos++] = kempld_read8(pld, KEMPLD_I2C_DATA);
+	}
+
+	if (i2c->pos >= msg->len) {
+		i2c->nmsgs--;
+		i2c->msg++;
+		i2c->pos = 0;
+		msg = i2c->msg;
+
+		if (i2c->nmsgs) {
+			if (!(msg->flags & I2C_M_NOSTART)) {
+				i2c->state = STATE_ADDR;
+				return 0;
+			} else {
+				i2c->state = (msg->flags & I2C_M_RD)
+					? STATE_READ : STATE_WRITE;
+			}
+		} else {
+			i2c->state = STATE_DONE;
+			kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+			return 0;
+		}
+	}
+
+	if (i2c->state == STATE_READ) {
+		kempld_write8(pld, KEMPLD_I2C_CMD, i2c->pos == (msg->len - 1) ?
+			      I2C_CMD_READ_NACK : I2C_CMD_READ_ACK);
+	} else {
+		kempld_write8(pld, KEMPLD_I2C_DATA, msg->buf[i2c->pos++]);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE);
+	}
+
+	return 0;
+}
+
+static int kempld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+				int num)
+{
+	struct kempld_i2c_data *i2c = i2c_get_adapdata(adap);
+	struct kempld_device_data *pld = i2c->pld;
+	unsigned long timeout = jiffies + HZ;
+	int ret;
+
+	i2c->msg = msgs;
+	i2c->pos = 0;
+	i2c->nmsgs = num;
+	i2c->state = STATE_INIT;
+
+	/* Handle the transfer */
+	while (time_before(jiffies, timeout)) {
+		kempld_get_mutex(pld);
+		ret = kempld_i2c_process(i2c);
+		kempld_release_mutex(pld);
+
+		if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR)
+			return (i2c->state == STATE_DONE) ? num : ret;
+
+		if (ret == 0)
+			timeout = jiffies + HZ;
+
+		usleep_range(5, 15);
+	}
+
+	i2c->state = STATE_ERROR;
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static void kempld_i2c_device_init(struct kempld_i2c_data *i2c)
+{
+	struct kempld_device_data *pld = i2c->pld;
+	u16 prescale_corr;
+	long prescale;
+	u8 ctrl;
+	u8 stat;
+	u8 cfg;
+
+	/* Make sure the device is disabled */
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+	ctrl &= ~(I2C_CTRL_EN | I2C_CTRL_IEN);
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+
+	if (bus_frequency > KEMPLD_I2C_FREQ_MAX)
+		bus_frequency = KEMPLD_I2C_FREQ_MAX;
+
+	if (pld->info.spec_major == 1)
+		prescale = pld->pld_clock / bus_frequency * 5 - 1000;
+	else
+		prescale = pld->pld_clock / bus_frequency * 4 - 3000;
+
+	if (prescale < 0)
+		prescale = 0;
+
+	/* Round to the best matching value */
+	prescale_corr = prescale / 1000;
+	if (prescale % 1000 >= 500)
+		prescale_corr++;
+
+	kempld_write8(pld, KEMPLD_I2C_PRELOW, prescale_corr & 0xff);
+	kempld_write8(pld, KEMPLD_I2C_PREHIGH, prescale_corr >> 8);
+
+	/* Activate I2C bus output on GPIO pins */
+	cfg = kempld_read8(pld, KEMPLD_CFG);
+	if (i2c_gpio_mux)
+		cfg |= KEMPLD_CFG_GPIO_I2C_MUX;
+	else
+		cfg &= ~KEMPLD_CFG_GPIO_I2C_MUX;
+	kempld_write8(pld, KEMPLD_CFG, cfg);
+
+	/* Enable the device */
+	kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK);
+	ctrl |= I2C_CTRL_EN;
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+
+	stat = kempld_read8(pld, KEMPLD_I2C_STAT);
+	if (stat & I2C_STAT_BUSY)
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+}
+
+static u32 kempld_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm kempld_i2c_algorithm = {
+	.master_xfer	= kempld_i2c_xfer,
+	.functionality	= kempld_i2c_func,
+};
+
+static struct i2c_adapter kempld_i2c_adapter = {
+	.owner		= THIS_MODULE,
+	.name		= "i2c-kempld",
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &kempld_i2c_algorithm,
+};
+
+static int kempld_i2c_probe(struct platform_device *pdev)
+{
+	struct kempld_device_data *pld = dev_get_drvdata(pdev->dev.parent);
+	struct kempld_i2c_data *i2c;
+	int ret;
+	u8 ctrl;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->pld = pld;
+	i2c->dev = &pdev->dev;
+	i2c->adap = kempld_i2c_adapter;
+	i2c->adap.dev.parent = i2c->dev;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	platform_set_drvdata(pdev, i2c);
+
+	kempld_get_mutex(pld);
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+
+	if (ctrl & I2C_CTRL_EN)
+		i2c->was_active = true;
+
+	kempld_i2c_device_init(i2c);
+	kempld_release_mutex(pld);
+
+	/* Add I2C adapter to I2C tree */
+	if (i2c_bus >= -1)
+		i2c->adap.nr = i2c_bus;
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret)
+		return ret;
+
+	dev_info(i2c->dev, "I2C bus initialized at %dkHz\n",
+		 bus_frequency);
+
+	return 0;
+}
+
+static int kempld_i2c_remove(struct platform_device *pdev)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+	u8 ctrl;
+
+	kempld_get_mutex(pld);
+	/*
+	 * Disable I2C logic if it was not activated before the
+	 * driver loaded
+	 */
+	if (!i2c->was_active) {
+		ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+		ctrl &= ~I2C_CTRL_EN;
+		kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+	}
+	kempld_release_mutex(pld);
+
+	i2c_del_adapter(&i2c->adap);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int kempld_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+	u8 ctrl;
+
+	kempld_get_mutex(pld);
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+	ctrl &= ~I2C_CTRL_EN;
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+
+static int kempld_i2c_resume(struct platform_device *pdev)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+
+	kempld_get_mutex(pld);
+	kempld_i2c_device_init(i2c);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+#else
+#define kempld_i2c_suspend	NULL
+#define kempld_i2c_resume	NULL
+#endif
+
+static struct platform_driver kempld_i2c_driver = {
+	.driver = {
+		.name = "kempld-i2c",
+		.owner = THIS_MODULE,
+	},
+	.probe		= kempld_i2c_probe,
+	.remove		= kempld_i2c_remove,
+	.suspend	= kempld_i2c_suspend,
+	.resume		= kempld_i2c_resume,
+};
+
+module_platform_driver(kempld_i2c_driver);
+
+MODULE_DESCRIPTION("KEM PLD I2C Driver");
+MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kempld_i2c");
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 5e705ee02f4..7607dc06191 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -679,7 +679,7 @@ static int fsl_i2c_probe(struct platform_device *op)
 	}
 	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
 
-	dev_set_drvdata(&op->dev, i2c);
+	platform_set_drvdata(op, i2c);
 
 	i2c->adap = mpc_ops;
 	i2c_set_adapdata(&i2c->adap, i2c);
@@ -707,7 +707,7 @@ static int fsl_i2c_probe(struct platform_device *op)
 
 static int fsl_i2c_remove(struct platform_device *op)
 {
-	struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
+	struct mpc_i2c *i2c = platform_get_drvdata(op);
 
 	i2c_del_adapter(&i2c->adap);
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 1a3abd6a0bf..b1f42bf4096 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -19,19 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/of_i2c.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 
-/* Register defines */
-#define	MV64XXX_I2C_REG_SLAVE_ADDR			0x00
-#define	MV64XXX_I2C_REG_DATA				0x04
-#define	MV64XXX_I2C_REG_CONTROL				0x08
-#define	MV64XXX_I2C_REG_STATUS				0x0c
-#define	MV64XXX_I2C_REG_BAUD				0x0c
-#define	MV64XXX_I2C_REG_EXT_SLAVE_ADDR			0x10
-#define	MV64XXX_I2C_REG_SOFT_RESET			0x1c
+#define MV64XXX_I2C_ADDR_ADDR(val)			((val & 0x7f) << 1)
+#define MV64XXX_I2C_BAUD_DIV_N(val)			(val & 0x7)
+#define MV64XXX_I2C_BAUD_DIV_M(val)			((val & 0xf) << 3)
 
 #define	MV64XXX_I2C_REG_CONTROL_ACK			0x00000004
 #define	MV64XXX_I2C_REG_CONTROL_IFLG			0x00000008
@@ -85,15 +81,26 @@ enum {
 	MV64XXX_I2C_ACTION_SEND_STOP,
 };
 
+struct mv64xxx_i2c_regs {
+	u8	addr;
+	u8	ext_addr;
+	u8	data;
+	u8	control;
+	u8	status;
+	u8	clock;
+	u8	soft_reset;
+};
+
 struct mv64xxx_i2c_data {
+	struct i2c_msg		*msgs;
+	int			num_msgs;
 	int			irq;
 	u32			state;
 	u32			action;
 	u32			aborting;
 	u32			cntl_bits;
 	void __iomem		*reg_base;
-	u32			reg_base_p;
-	u32			reg_size;
+	struct mv64xxx_i2c_regs	reg_offsets;
 	u32			addr1;
 	u32			addr2;
 	u32			bytes_left;
@@ -112,6 +119,52 @@ struct mv64xxx_i2c_data {
 	struct i2c_adapter	adapter;
 };
 
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
+	.addr		= 0x00,
+	.ext_addr	= 0x10,
+	.data		= 0x04,
+	.control	= 0x08,
+	.status		= 0x0c,
+	.clock		= 0x0c,
+	.soft_reset	= 0x1c,
+};
+
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = {
+	.addr		= 0x00,
+	.ext_addr	= 0x04,
+	.data		= 0x08,
+	.control	= 0x0c,
+	.status		= 0x10,
+	.clock		= 0x14,
+	.soft_reset	= 0x18,
+};
+
+static void
+mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
+	struct i2c_msg *msg)
+{
+	u32	dir = 0;
+
+	drv_data->msg = msg;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = msg->len;
+	drv_data->aborting = 0;
+	drv_data->rc = 0;
+	drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
+		MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
+
+	if (msg->flags & I2C_M_RD)
+		dir = 1;
+
+	if (msg->flags & I2C_M_TEN) {
+		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
+		drv_data->addr2 = (u32)msg->addr & 0xff;
+	} else {
+		drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir;
+		drv_data->addr2 = 0;
+	}
+}
+
 /*
  *****************************************************************************
  *
@@ -124,13 +177,13 @@ struct mv64xxx_i2c_data {
 static void
 mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
 {
-	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET);
-	writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
-		drv_data->reg_base + MV64XXX_I2C_REG_BAUD);
-	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR);
-	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR);
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
+	writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
+		drv_data->reg_base + drv_data->reg_offsets.clock);
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.addr);
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
 	writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
-		drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		drv_data->reg_base + drv_data->reg_offsets.control);
 	drv_data->state = MV64XXX_I2C_STATE_IDLE;
 }
 
@@ -170,7 +223,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
 		if ((drv_data->bytes_left == 0)
 				|| (drv_data->aborting
 					&& (drv_data->byte_posn != 0))) {
-			if (drv_data->send_stop) {
+			if (drv_data->send_stop || drv_data->aborting) {
 				drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
 				drv_data->state = MV64XXX_I2C_STATE_IDLE;
 			} else {
@@ -227,7 +280,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
 		/* Doesn't seem to be a device at other end */
 		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
 		drv_data->state = MV64XXX_I2C_STATE_IDLE;
-		drv_data->rc = -ENODEV;
+		drv_data->rc = -ENXIO;
 		break;
 
 	default:
@@ -247,58 +300,71 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 {
 	switch(drv_data->action) {
 	case MV64XXX_I2C_ACTION_SEND_RESTART:
+		/* We should only get here if we have further messages */
+		BUG_ON(drv_data->num_msgs == 0);
+
 		drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
-		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
-		drv_data->block = 0;
-		wake_up(&drv_data->waitq);
+			drv_data->reg_base + drv_data->reg_offsets.control);
+
+		drv_data->msgs++;
+		drv_data->num_msgs--;
+
+		/* Setup for the next message */
+		mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+
+		/*
+		 * We're never at the start of the message here, and by this
+		 * time it's already too late to do any protocol mangling.
+		 * Thankfully, do not advertise support for that feature.
+		 */
+		drv_data->send_stop = drv_data->num_msgs == 1;
 		break;
 
 	case MV64XXX_I2C_ACTION_CONTINUE:
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_SEND_START:
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_SEND_ADDR_1:
 		writel(drv_data->addr1,
-			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			drv_data->reg_base + drv_data->reg_offsets.data);
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_SEND_ADDR_2:
 		writel(drv_data->addr2,
-			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			drv_data->reg_base + drv_data->reg_offsets.data);
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_SEND_DATA:
 		writel(drv_data->msg->buf[drv_data->byte_posn++],
-			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			drv_data->reg_base + drv_data->reg_offsets.data);
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_RCV_DATA:
 		drv_data->msg->buf[drv_data->byte_posn++] =
-			readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			readl(drv_data->reg_base + drv_data->reg_offsets.data);
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
 		drv_data->msg->buf[drv_data->byte_posn++] =
-			readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			readl(drv_data->reg_base + drv_data->reg_offsets.data);
 		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		drv_data->block = 0;
 		wake_up(&drv_data->waitq);
 		break;
@@ -313,7 +379,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 	case MV64XXX_I2C_ACTION_SEND_STOP:
 		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		drv_data->block = 0;
 		wake_up(&drv_data->waitq);
 		break;
@@ -329,9 +395,9 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
 	irqreturn_t	rc = IRQ_NONE;
 
 	spin_lock_irqsave(&drv_data->lock, flags);
-	while (readl(drv_data->reg_base + MV64XXX_I2C_REG_CONTROL) &
+	while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
 						MV64XXX_I2C_REG_CONTROL_IFLG) {
-		status = readl(drv_data->reg_base + MV64XXX_I2C_REG_STATUS);
+		status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
 		mv64xxx_i2c_fsm(drv_data, status);
 		mv64xxx_i2c_do_action(drv_data);
 		rc = IRQ_HANDLED;
@@ -349,32 +415,6 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
  *****************************************************************************
  */
 static void
-mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
-	struct i2c_msg *msg)
-{
-	u32	dir = 0;
-
-	drv_data->msg = msg;
-	drv_data->byte_posn = 0;
-	drv_data->bytes_left = msg->len;
-	drv_data->aborting = 0;
-	drv_data->rc = 0;
-	drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
-		MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
-
-	if (msg->flags & I2C_M_RD)
-		dir = 1;
-
-	if (msg->flags & I2C_M_TEN) {
-		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
-		drv_data->addr2 = (u32)msg->addr & 0xff;
-	} else {
-		drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir;
-		drv_data->addr2 = 0;
-	}
-}
-
-static void
 mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
 {
 	long		time_left;
@@ -414,36 +454,15 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
 
 static int
 mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
-				int is_first, int is_last)
+				int is_last)
 {
 	unsigned long	flags;
 
 	spin_lock_irqsave(&drv_data->lock, flags);
 	mv64xxx_i2c_prepare_for_io(drv_data, msg);
 
-	if (unlikely(msg->flags & I2C_M_NOSTART)) { /* Skip start/addr phases */
-		if (drv_data->msg->flags & I2C_M_RD) {
-			/* No action to do, wait for slave to send a byte */
-			drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
-		} else {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
-			drv_data->bytes_left--;
-		}
-	} else {
-		if (is_first) {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
-		} else {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
-		}
-	}
+	drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+	drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
 
 	drv_data->send_stop = is_last;
 	drv_data->block = 1;
@@ -471,16 +490,20 @@ static int
 mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 {
 	struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
-	int	i, rc;
+	int rc, ret = num;
 
-	for (i = 0; i < num; i++) {
-		rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[i],
-						i == 0, i + 1 == num);
-		if (rc < 0)
-			return rc;
-	}
+	BUG_ON(drv_data->msgs != NULL);
+	drv_data->msgs = msgs;
+	drv_data->num_msgs = num;
+
+	rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
+	if (rc < 0)
+		ret = rc;
+
+	drv_data->num_msgs = 0;
+	drv_data->msgs = NULL;
 
-	return num;
+	return ret;
 }
 
 static const struct i2c_algorithm mv64xxx_i2c_algo = {
@@ -495,39 +518,12 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
  *
  *****************************************************************************
  */
-static int
-mv64xxx_i2c_map_regs(struct platform_device *pd,
-	struct mv64xxx_i2c_data *drv_data)
-{
-	int size;
-	struct resource	*r = platform_get_resource(pd, IORESOURCE_MEM, 0);
-
-	if (!r)
-		return -ENODEV;
-
-	size = resource_size(r);
-
-	if (!request_mem_region(r->start, size, drv_data->adapter.name))
-		return -EBUSY;
-
-	drv_data->reg_base = ioremap(r->start, size);
-	drv_data->reg_base_p = r->start;
-	drv_data->reg_size = size;
-
-	return 0;
-}
-
-static void
-mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
-{
-	if (drv_data->reg_base) {
-		iounmap(drv_data->reg_base);
-		release_mem_region(drv_data->reg_base_p, drv_data->reg_size);
-	}
-
-	drv_data->reg_base = NULL;
-	drv_data->reg_base_p = 0;
-}
+static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
+	{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
 
 #ifdef CONFIG_OF
 static int
@@ -562,8 +558,10 @@ mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
 
 static int
 mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
-		  struct device_node *np)
+		  struct device *dev)
 {
+	const struct of_device_id *device;
+	struct device_node *np = dev->of_node;
 	u32 bus_freq, tclk;
 	int rc = 0;
 
@@ -580,7 +578,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 		goto out;
 	}
 	tclk = clk_get_rate(drv_data->clk);
-	of_property_read_u32(np, "clock-frequency", &bus_freq);
+
+	rc = of_property_read_u32(np, "clock-frequency", &bus_freq);
+	if (rc)
+		bus_freq = 100000; /* 100kHz by default */
+
 	if (!mv64xxx_find_baud_factors(bus_freq, tclk,
 				       &drv_data->freq_n, &drv_data->freq_m)) {
 		rc = -EINVAL;
@@ -592,6 +594,13 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	 * So hard code the value to 1 second.
 	 */
 	drv_data->adapter.timeout = HZ;
+
+	device = of_match_device(mv64xxx_i2c_of_match_table, dev);
+	if (!device)
+		return -ENODEV;
+
+	memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
+
 out:
 	return rc;
 #endif
@@ -599,7 +608,7 @@ out:
 #else /* CONFIG_OF */
 static int
 mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
-		  struct device_node *np)
+		  struct device *dev)
 {
 	return -ENODEV;
 }
@@ -610,19 +619,21 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 {
 	struct mv64xxx_i2c_data		*drv_data;
 	struct mv64xxx_i2c_pdata	*pdata = pd->dev.platform_data;
+	struct resource	*r;
 	int	rc;
 
 	if ((!pdata && !pd->dev.of_node))
 		return -ENODEV;
 
-	drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
+	drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data),
+				GFP_KERNEL);
 	if (!drv_data)
 		return -ENOMEM;
 
-	if (mv64xxx_i2c_map_regs(pd, drv_data)) {
-		rc = -ENODEV;
-		goto exit_kfree;
-	}
+	r = platform_get_resource(pd, IORESOURCE_MEM, 0);
+	drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
+	if (IS_ERR(drv_data->reg_base))
+		return PTR_ERR(drv_data->reg_base);
 
 	strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
 		sizeof(drv_data->adapter.name));
@@ -632,7 +643,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
-	drv_data->clk = clk_get(&pd->dev, NULL);
+	drv_data->clk = devm_clk_get(&pd->dev, NULL);
 	if (!IS_ERR(drv_data->clk)) {
 		clk_prepare(drv_data->clk);
 		clk_enable(drv_data->clk);
@@ -643,14 +654,15 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		drv_data->freq_n = pdata->freq_n;
 		drv_data->irq = platform_get_irq(pd, 0);
 		drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
+		memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
 	} else if (pd->dev.of_node) {
-		rc = mv64xxx_of_config(drv_data, pd->dev.of_node);
+		rc = mv64xxx_of_config(drv_data, &pd->dev);
 		if (rc)
-			goto exit_unmap_regs;
+			goto exit_clk;
 	}
 	if (drv_data->irq < 0) {
 		rc = -ENXIO;
-		goto exit_unmap_regs;
+		goto exit_clk;
 	}
 
 	drv_data->adapter.dev.parent = &pd->dev;
@@ -664,13 +676,13 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 
 	mv64xxx_i2c_hw_init(drv_data);
 
-	if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
-			MV64XXX_I2C_CTLR_NAME, drv_data)) {
+	rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
+			 MV64XXX_I2C_CTLR_NAME, drv_data);
+	if (rc) {
 		dev_err(&drv_data->adapter.dev,
-			"mv64xxx: Can't register intr handler irq: %d\n",
-			drv_data->irq);
-		rc = -EINVAL;
-		goto exit_unmap_regs;
+			"mv64xxx: Can't register intr handler irq%d: %d\n",
+			drv_data->irq, rc);
+		goto exit_clk;
 	} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
 		dev_err(&drv_data->adapter.dev,
 			"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
@@ -681,9 +693,9 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 
 	return 0;
 
-	exit_free_irq:
-		free_irq(drv_data->irq, drv_data);
-	exit_unmap_regs:
+exit_free_irq:
+	free_irq(drv_data->irq, drv_data);
+exit_clk:
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
 	if (!IS_ERR(drv_data->clk)) {
@@ -691,9 +703,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		clk_unprepare(drv_data->clk);
 	}
 #endif
-		mv64xxx_i2c_unmap_regs(drv_data);
-	exit_kfree:
-		kfree(drv_data);
 	return rc;
 }
 
@@ -704,7 +713,6 @@ mv64xxx_i2c_remove(struct platform_device *dev)
 
 	i2c_del_adapter(&drv_data->adapter);
 	free_irq(drv_data->irq, drv_data);
-	mv64xxx_i2c_unmap_regs(drv_data);
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
 	if (!IS_ERR(drv_data->clk)) {
@@ -712,17 +720,10 @@ mv64xxx_i2c_remove(struct platform_device *dev)
 		clk_unprepare(drv_data->clk);
 	}
 #endif
-	kfree(drv_data);
 
 	return 0;
 }
 
-static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
-	{ .compatible = "marvell,mv64xxx-i2c", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
-
 static struct platform_driver mv64xxx_i2c_driver = {
 	.probe	= mv64xxx_i2c_probe,
 	.remove	= mv64xxx_i2c_remove,
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 2039f230482..df8ff5aea5b 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -24,7 +24,6 @@
 #include <linux/platform_device.h>
 #include <linux/jiffies.h>
 #include <linux/io.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/stmp_device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -638,15 +637,10 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mxs_i2c_dev *i2c;
 	struct i2c_adapter *adap;
-	struct pinctrl *pinctrl;
 	struct resource *res;
 	resource_size_t res_size;
 	int err, irq;
 
-	pinctrl = devm_pinctrl_get_select_default(dev);
-	if (IS_ERR(pinctrl))
-		return PTR_ERR(pinctrl);
-
 	i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL);
 	if (!i2c)
 		return -ENOMEM;
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index c7e3b0c1a1c..512dfe60970 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/amba/bus.h>
-#include <linux/atomic.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
@@ -106,6 +105,16 @@
 /* maximum threshold value */
 #define MAX_I2C_FIFO_THRESHOLD	15
 
+/**
+ * struct i2c_vendor_data - per-vendor variations
+ * @has_mtdws: variant has the MTDWS bit
+ * @fifodepth: variant FIFO depth
+ */
+struct i2c_vendor_data {
+	bool has_mtdws;
+	u32 fifodepth;
+};
+
 enum i2c_status {
 	I2C_NOP,
 	I2C_ON_GOING,
@@ -138,6 +147,7 @@ struct i2c_nmk_client {
 
 /**
  * struct nmk_i2c_dev - private data structure of the controller.
+ * @vendor: vendor data for this variant.
  * @adev: parent amba device.
  * @adap: corresponding I2C adapter.
  * @irq: interrupt line for the controller.
@@ -151,6 +161,7 @@ struct i2c_nmk_client {
  * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
+	struct i2c_vendor_data		*vendor;
 	struct amba_device		*adev;
 	struct i2c_adapter		adap;
 	int				irq;
@@ -422,7 +433,7 @@ static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
 	irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF |
 			I2C_IT_MAL | I2C_IT_BERR);
 
-	if (dev->stop)
+	if (dev->stop || !dev->vendor->has_mtdws)
 		irq_mask |= I2C_IT_MTD;
 	else
 		irq_mask |= I2C_IT_MTDWS;
@@ -502,7 +513,7 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
 	 * set the MTDWS bit (Master Transaction Done Without Stop)
 	 * to start repeated start operation
 	 */
-	if (dev->stop)
+	if (dev->stop || !dev->vendor->has_mtdws)
 		irq_mask |= I2C_IT_MTD;
 	else
 		irq_mask |= I2C_IT_MTDWS;
@@ -929,8 +940,6 @@ static void nmk_i2c_of_probe(struct device_node *np,
 		pdata->sm = I2C_FREQ_MODE_FAST;
 }
 
-static atomic_t adapter_id = ATOMIC_INIT(0);
-
 static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	int ret = 0;
@@ -938,6 +947,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	struct device_node *np = adev->dev.of_node;
 	struct nmk_i2c_dev	*dev;
 	struct i2c_adapter *adap;
+	struct i2c_vendor_data *vendor = id->data;
+	u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
 
 	if (!pdata) {
 		if (np) {
@@ -954,12 +965,25 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 			pdata = &u8500_i2c;
 	}
 
+	if (pdata->tft > max_fifo_threshold) {
+		dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
+			pdata->tft, max_fifo_threshold);
+		pdata->tft = max_fifo_threshold;
+	}
+
+	if (pdata->rft > max_fifo_threshold) {
+		dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
+			pdata->rft, max_fifo_threshold);
+		pdata->rft = max_fifo_threshold;
+	}
+
 	dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
 	if (!dev) {
 		dev_err(&adev->dev, "cannot allocate memory\n");
 		ret = -ENOMEM;
 		goto err_no_mem;
 	}
+	dev->vendor = vendor;
 	dev->busy = false;
 	dev->adev = adev;
 	amba_set_drvdata(adev, dev);
@@ -999,10 +1023,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	adap->class	= I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo	= &nmk_i2c_algo;
 	adap->timeout	= msecs_to_jiffies(pdata->timeout);
-	adap->nr = atomic_read(&adapter_id);
 	snprintf(adap->name, sizeof(adap->name),
-		 "Nomadik I2C%d at %pR", adap->nr, &adev->res);
-	atomic_inc(&adapter_id);
+		 "Nomadik I2C at %pR", &adev->res);
 
 	/* fetch the controller configuration from machine */
 	dev->cfg.clk_freq = pdata->clk_freq;
@@ -1017,7 +1039,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 		 "initialize %s on virtual base %p\n",
 		 adap->name, dev->virtbase);
 
-	ret = i2c_add_numbered_adapter(adap);
+	ret = i2c_add_adapter(adap);
 	if (ret) {
 		dev_err(&adev->dev, "failed to add adapter\n");
 		goto err_add_adap;
@@ -1064,14 +1086,26 @@ static int nmk_i2c_remove(struct amba_device *adev)
 	return 0;
 }
 
+static struct i2c_vendor_data vendor_stn8815 = {
+	.has_mtdws = false,
+	.fifodepth = 16, /* Guessed from TFTR/RFTR = 7 */
+};
+
+static struct i2c_vendor_data vendor_db8500 = {
+	.has_mtdws = true,
+	.fifodepth = 32, /* Guessed from TFTR/RFTR = 15 */
+};
+
 static struct amba_id nmk_i2c_ids[] = {
 	{
 		.id	= 0x00180024,
 		.mask	= 0x00ffffff,
+		.data	= &vendor_stn8815,
 	},
 	{
 		.id	= 0x00380024,
 		.mask	= 0x00ffffff,
+		.data	= &vendor_db8500,
 	},
 	{},
 };
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e02f9e36a7b..142b694d1c6 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -180,6 +180,8 @@ enum {
 #define I2C_OMAP_ERRATA_I207		(1 << 0)
 #define I2C_OMAP_ERRATA_I462		(1 << 1)
 
+#define OMAP_I2C_IP_V2_INTERRUPTS_MASK	0x6FFF
+
 struct omap_i2c_dev {
 	spinlock_t		lock;		/* IRQ synchronization */
 	struct device		*dev;
@@ -193,6 +195,7 @@ struct omap_i2c_dev {
 						    long latency);
 	u32			speed;		/* Speed of bus in kHz */
 	u32			flags;
+	u16			scheme;
 	u16			cmd_err;
 	u8			*buf;
 	u8			*regs;
@@ -1082,14 +1085,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	int irq;
 	int r;
 	u32 rev;
-	u16 minor, major, scheme;
-
-	/* NOTE: driver uses the static register mapping */
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no mem resource?\n");
-		return -ENODEV;
-	}
+	u16 minor, major;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -1103,6 +1099,7 @@ omap_i2c_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(dev->base))
 		return PTR_ERR(dev->base);
@@ -1159,8 +1156,8 @@ omap_i2c_probe(struct platform_device *pdev)
 	 */
 	rev = __raw_readw(dev->base + 0x04);
 
-	scheme = OMAP_I2C_SCHEME(rev);
-	switch (scheme) {
+	dev->scheme = OMAP_I2C_SCHEME(rev);
+	switch (dev->scheme) {
 	case OMAP_I2C_SCHEME_0:
 		dev->regs = (u8 *)reg_map_ip_v1;
 		dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG);
@@ -1289,7 +1286,11 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 
 	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
 
-	omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+	if (_dev->scheme == OMAP_I2C_SCHEME_0)
+		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+	else
+		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR,
+				   OMAP_I2C_IP_V2_INTERRUPTS_MASK);
 
 	if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
 		omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index ea6d45d1dcd..fbafed29fb8 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1160,7 +1160,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		i2c->adap.class = plat->class;
 	}
 
-	clk_enable(i2c->clk);
+	clk_prepare_enable(i2c->clk);
 
 	if (i2c->use_pio) {
 		i2c->adap.algo = &i2c_pxa_pio_algorithm;
@@ -1202,7 +1202,7 @@ eadapt:
 	if (!i2c->use_pio)
 		free_irq(irq, i2c);
 ereqirq:
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 	iounmap(i2c->reg_base);
 eremap:
 	clk_put(i2c->clk);
@@ -1221,7 +1221,7 @@ static int i2c_pxa_remove(struct platform_device *dev)
 	if (!i2c->use_pio)
 		free_irq(i2c->irq, i2c);
 
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 	clk_put(i2c->clk);
 
 	iounmap(i2c->reg_base);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 4ba4a95b6b2..0fc58586161 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -623,12 +623,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	u32 bus_speed;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "no mmio resources\n");
-		return -ENODEV;
-	}
-
 	priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL);
 	if (!priv) {
 		dev_err(dev, "no mem for private data\n");
@@ -642,6 +636,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->io = devm_ioremap_resource(dev, res);
 	if (IS_ERR(priv->io))
 		return PTR_ERR(priv->io);
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
new file mode 100644
index 00000000000..baaa7d15b73
--- /dev/null
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -0,0 +1,479 @@
+/*
+ *  Wondermedia I2C Master Mode Driver
+ *
+ *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ *  Derived from GPLv2+ licensed source:
+ *  - Copyright (C) 2008 WonderMedia Technologies, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2, or
+ *  (at your option) any later version. as published by the Free Software
+ *  Foundation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_i2c.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+#define REG_CR		0x00
+#define REG_TCR		0x02
+#define REG_CSR		0x04
+#define REG_ISR		0x06
+#define REG_IMR		0x08
+#define REG_CDR		0x0A
+#define REG_TR		0x0C
+#define REG_MCR		0x0E
+#define REG_SLAVE_CR	0x10
+#define REG_SLAVE_SR	0x12
+#define REG_SLAVE_ISR	0x14
+#define REG_SLAVE_IMR	0x16
+#define REG_SLAVE_DR	0x18
+#define REG_SLAVE_TR	0x1A
+
+/* REG_CR Bit fields */
+#define CR_TX_NEXT_ACK		0x0000
+#define CR_ENABLE		0x0001
+#define CR_TX_NEXT_NO_ACK	0x0002
+#define CR_TX_END		0x0004
+#define CR_CPU_RDY		0x0008
+#define SLAV_MODE_SEL		0x8000
+
+/* REG_TCR Bit fields */
+#define TCR_STANDARD_MODE	0x0000
+#define TCR_MASTER_WRITE	0x0000
+#define TCR_HS_MODE		0x2000
+#define TCR_MASTER_READ		0x4000
+#define TCR_FAST_MODE		0x8000
+#define TCR_SLAVE_ADDR_MASK	0x007F
+
+/* REG_ISR Bit fields */
+#define ISR_NACK_ADDR		0x0001
+#define ISR_BYTE_END		0x0002
+#define ISR_SCL_TIMEOUT		0x0004
+#define ISR_WRITE_ALL		0x0007
+
+/* REG_IMR Bit fields */
+#define IMR_ENABLE_ALL		0x0007
+
+/* REG_CSR Bit fields */
+#define CSR_RCV_NOT_ACK		0x0001
+#define CSR_RCV_ACK_MASK	0x0001
+#define CSR_READY_MASK		0x0002
+
+/* REG_TR */
+#define SCL_TIMEOUT(x)		(((x) & 0xFF) << 8)
+#define TR_STD			0x0064
+#define TR_HS			0x0019
+
+/* REG_MCR */
+#define MCR_APB_96M		7
+#define MCR_APB_166M		12
+
+#define I2C_MODE_STANDARD	0
+#define I2C_MODE_FAST		1
+
+#define WMT_I2C_TIMEOUT		(msecs_to_jiffies(1000))
+
+struct wmt_i2c_dev {
+	struct i2c_adapter	adapter;
+	struct completion	complete;
+	struct device		*dev;
+	void __iomem		*base;
+	struct clk		*clk;
+	int			mode;
+	int			irq;
+	u16			cmd_status;
+};
+
+static int wmt_i2c_wait_bus_not_busy(struct wmt_i2c_dev *i2c_dev)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + WMT_I2C_TIMEOUT;
+	while (!(readw(i2c_dev->base + REG_CSR) & CSR_READY_MASK)) {
+		if (time_after(jiffies, timeout)) {
+			dev_warn(i2c_dev->dev, "timeout waiting for bus ready\n");
+			return -EBUSY;
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+static int wmt_check_status(struct wmt_i2c_dev *i2c_dev)
+{
+	int ret = 0;
+
+	if (i2c_dev->cmd_status & ISR_NACK_ADDR)
+		ret = -EIO;
+
+	if (i2c_dev->cmd_status & ISR_SCL_TIMEOUT)
+		ret = -ETIMEDOUT;
+
+	return ret;
+}
+
+static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+			 int last)
+{
+	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u16 val, tcr_val;
+	int ret, wait_result;
+	int xfer_len = 0;
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (pmsg->len == 0) {
+		/*
+		 * We still need to run through the while (..) once, so
+		 * start at -1 and break out early from the loop
+		 */
+		xfer_len = -1;
+		writew(0, i2c_dev->base + REG_CDR);
+	} else {
+		writew(pmsg->buf[0] & 0xFF, i2c_dev->base + REG_CDR);
+	}
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		val = readw(i2c_dev->base + REG_CR);
+		val &= ~CR_TX_END;
+		writew(val, i2c_dev->base + REG_CR);
+
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	INIT_COMPLETION(i2c_dev->complete);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		tcr_val = TCR_STANDARD_MODE;
+	else
+		tcr_val = TCR_FAST_MODE;
+
+	tcr_val |= (TCR_MASTER_WRITE | (pmsg->addr & TCR_SLAVE_ADDR_MASK));
+
+	writew(tcr_val, i2c_dev->base + REG_TCR);
+
+	if (pmsg->flags & I2C_M_NOSTART) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	while (xfer_len < pmsg->len) {
+		wait_result = wait_for_completion_timeout(&i2c_dev->complete,
+							  500 * HZ / 1000);
+
+		if (wait_result == 0)
+			return -ETIMEDOUT;
+
+		ret = wmt_check_status(i2c_dev);
+		if (ret)
+			return ret;
+
+		xfer_len++;
+
+		val = readw(i2c_dev->base + REG_CSR);
+		if ((val & CSR_RCV_ACK_MASK) == CSR_RCV_NOT_ACK) {
+			dev_dbg(i2c_dev->dev, "write RCV NACK error\n");
+			return -EIO;
+		}
+
+		if (pmsg->len == 0) {
+			val = CR_TX_END | CR_CPU_RDY | CR_ENABLE;
+			writew(val, i2c_dev->base + REG_CR);
+			break;
+		}
+
+		if (xfer_len == pmsg->len) {
+			if (last != 1)
+				writew(CR_ENABLE, i2c_dev->base + REG_CR);
+		} else {
+			writew(pmsg->buf[xfer_len] & 0xFF, i2c_dev->base +
+								REG_CDR);
+			writew(CR_CPU_RDY | CR_ENABLE, i2c_dev->base + REG_CR);
+		}
+	}
+
+	return 0;
+}
+
+static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+			int last)
+{
+	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u16 val, tcr_val;
+	int ret, wait_result;
+	u32 xfer_len = 0;
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	val = readw(i2c_dev->base + REG_CR);
+	val &= ~CR_TX_END;
+	writew(val, i2c_dev->base + REG_CR);
+
+	val = readw(i2c_dev->base + REG_CR);
+	val &= ~CR_TX_NEXT_NO_ACK;
+	writew(val, i2c_dev->base + REG_CR);
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	if (pmsg->len == 1) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_TX_NEXT_NO_ACK;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	INIT_COMPLETION(i2c_dev->complete);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		tcr_val = TCR_STANDARD_MODE;
+	else
+		tcr_val = TCR_FAST_MODE;
+
+	tcr_val |= TCR_MASTER_READ | (pmsg->addr & TCR_SLAVE_ADDR_MASK);
+
+	writew(tcr_val, i2c_dev->base + REG_TCR);
+
+	if (pmsg->flags & I2C_M_NOSTART) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	while (xfer_len < pmsg->len) {
+		wait_result = wait_for_completion_timeout(&i2c_dev->complete,
+							  500 * HZ / 1000);
+
+		if (!wait_result)
+			return -ETIMEDOUT;
+
+		ret = wmt_check_status(i2c_dev);
+		if (ret)
+			return ret;
+
+		pmsg->buf[xfer_len] = readw(i2c_dev->base + REG_CDR) >> 8;
+		xfer_len++;
+
+		if (xfer_len == pmsg->len - 1) {
+			val = readw(i2c_dev->base + REG_CR);
+			val |= (CR_TX_NEXT_NO_ACK | CR_CPU_RDY);
+			writew(val, i2c_dev->base + REG_CR);
+		} else {
+			val = readw(i2c_dev->base + REG_CR);
+			val |= CR_CPU_RDY;
+			writew(val, i2c_dev->base + REG_CR);
+		}
+	}
+
+	return 0;
+}
+
+static int wmt_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg msgs[],
+			int num)
+{
+	struct i2c_msg *pmsg;
+	int i, is_last;
+	int ret = 0;
+
+	for (i = 0; ret >= 0 && i < num; i++) {
+		is_last = ((i + 1) == num);
+
+		pmsg = &msgs[i];
+		if (pmsg->flags & I2C_M_RD)
+			ret = wmt_i2c_read(adap, pmsg, is_last);
+		else
+			ret = wmt_i2c_write(adap, pmsg, is_last);
+	}
+
+	return (ret < 0) ? ret : i;
+}
+
+static u32 wmt_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm wmt_i2c_algo = {
+	.master_xfer	= wmt_i2c_xfer,
+	.functionality	= wmt_i2c_func,
+};
+
+static irqreturn_t wmt_i2c_isr(int irq, void *data)
+{
+	struct wmt_i2c_dev *i2c_dev = data;
+
+	/* save the status and write-clear it */
+	i2c_dev->cmd_status = readw(i2c_dev->base + REG_ISR);
+	writew(i2c_dev->cmd_status, i2c_dev->base + REG_ISR);
+
+	complete(&i2c_dev->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int wmt_i2c_reset_hardware(struct wmt_i2c_dev *i2c_dev)
+{
+	int err;
+
+	err = clk_prepare_enable(i2c_dev->clk);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to enable clock\n");
+		return err;
+	}
+
+	err = clk_set_rate(i2c_dev->clk, 20000000);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to set clock = 20Mhz\n");
+		return err;
+	}
+
+	writew(0, i2c_dev->base + REG_CR);
+	writew(MCR_APB_166M, i2c_dev->base + REG_MCR);
+	writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
+	writew(IMR_ENABLE_ALL, i2c_dev->base + REG_IMR);
+	writew(CR_ENABLE, i2c_dev->base + REG_CR);
+	readw(i2c_dev->base + REG_CSR);		/* read clear */
+	writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		writew(SCL_TIMEOUT(128) | TR_STD, i2c_dev->base + REG_TR);
+	else
+		writew(SCL_TIMEOUT(128) | TR_HS, i2c_dev->base + REG_TR);
+
+	return 0;
+}
+
+static int wmt_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct wmt_i2c_dev *i2c_dev;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	int err;
+	u32 clk_rate;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev) {
+		dev_err(&pdev->dev, "device memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	i2c_dev->irq = irq_of_parse_and_map(np, 0);
+	if (!i2c_dev->irq) {
+		dev_err(&pdev->dev, "irq missing or invalid\n");
+		return -EINVAL;
+	}
+
+	i2c_dev->clk = of_clk_get(np, 0);
+	if (IS_ERR(i2c_dev->clk)) {
+		dev_err(&pdev->dev, "unable to request clock\n");
+		return PTR_ERR(i2c_dev->clk);
+	}
+
+	i2c_dev->mode = I2C_MODE_STANDARD;
+	err = of_property_read_u32(np, "clock-frequency", &clk_rate);
+	if ((!err) && (clk_rate == 400000))
+		i2c_dev->mode = I2C_MODE_FAST;
+
+	i2c_dev->dev = &pdev->dev;
+
+	err = devm_request_irq(&pdev->dev, i2c_dev->irq, wmt_i2c_isr, 0,
+							"i2c", i2c_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request irq %i\n", i2c_dev->irq);
+		return err;
+	}
+
+	adap = &i2c_dev->adapter;
+	i2c_set_adapdata(adap, i2c_dev);
+	strlcpy(adap->name, "WMT I2C adapter", sizeof(adap->name));
+	adap->owner = THIS_MODULE;
+	adap->algo = &wmt_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&i2c_dev->complete);
+
+	err = wmt_i2c_reset_hardware(i2c_dev);
+	if (err) {
+		dev_err(&pdev->dev, "error initializing hardware\n");
+		return err;
+	}
+
+	err = i2c_add_adapter(adap);
+	if (err) {
+		dev_err(&pdev->dev, "failed to add adapter\n");
+		return err;
+	}
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	of_i2c_register_devices(adap);
+
+	return 0;
+}
+
+static int wmt_i2c_remove(struct platform_device *pdev)
+{
+	struct wmt_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	/* Disable interrupts, clock and delete adapter */
+	writew(0, i2c_dev->base + REG_IMR);
+	clk_disable_unprepare(i2c_dev->clk);
+	i2c_del_adapter(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static struct of_device_id wmt_i2c_dt_ids[] = {
+	{ .compatible = "wm,wm8505-i2c" },
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver wmt_i2c_driver = {
+	.probe		= wmt_i2c_probe,
+	.remove		= wmt_i2c_remove,
+	.driver		= {
+		.name	= "wmt-i2c",
+		.owner	= THIS_MODULE,
+		.of_match_table = wmt_i2c_dt_ids,
+	},
+};
+
+module_platform_driver(wmt_i2c_driver);
+
+MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids);
author	Linus Torvalds <torvalds@linux-foundation.org>	2013-07-04 14:02:09 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2013-07-04 14:02:09 -0700
commit	98f486f18d16e2214728d101ed8b6a12dce75539 (patch)
tree	987e2fcbd6089a94a00e489cd62fec1b8b10cd02
parent	84cbd7222b2b00dcddef3103203986b3d59c836a (diff)
parent	97191d734f6ac028e5e6dcd574378c1544a16c0b (diff)