summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-02-11 11:44:25 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-02-11 11:44:25 -0800
commit5f0b1437e0708772b6fecae5900c01c3b5f9b512 (patch)
treebcd923e305345178bc162ed8560d56a3af197224
parent574009c1a895aeeb85eaab29c235d75852b09eb8 (diff)
parent81b7bbd1932a04869d4c8635a75222dfc6089f96 (diff)
Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (97 commits) [SCSI] zfcp: removed wrong comment [SCSI] zfcp: use of uninitialized variable [SCSI] zfcp: Invalid locking order [SCSI] aic79xx: use dma_get_required_mask() [SCSI] aic79xx: fix bracket mismatch in unused macro [SCSI] BusLogic: Replace 'boolean' by 'bool' [SCSI] advansys: clean up warnings [SCSI] 53c7xx: brackets fix in uncompiled code [SCSI] nsp_cs: remove old scsi code [SCSI] aic79xx: make ahd_match_scb() static [SCSI] DAC960: kmalloc->kzalloc/Casting cleanups [SCSI] scsi_kmap_atomic_sg(): check that local irqs are disabled [SCSI] Buslogic: local_irq_disable() is redundant after local_irq_save() [SCSI] aic94xx: update for v28 firmware [SCSI] scsi_error: Fix lost EH commands [SCSI] aic94xx: Add default bus reset handler [SCSI] aic94xx: Remove TMF result code munging [SCSI] libsas: Add an LU reset mechanism to the error handler [SCSI] libsas: Don't BUG when connecting two expanders via wide port [SCSI] st: fix Tape dies if wrong block size used, bug 7919 ...
-rw-r--r--Documentation/scsi/ChangeLog.megaraid16
-rw-r--r--drivers/block/DAC960.c27
-rw-r--r--drivers/message/fusion/Kconfig2
-rw-r--r--drivers/message/fusion/Makefile7
-rw-r--r--drivers/message/fusion/lsi/mpi.h7
-rw-r--r--drivers/message/fusion/lsi/mpi_cnfg.h131
-rw-r--r--drivers/message/fusion/lsi/mpi_history.txt77
-rw-r--r--drivers/message/fusion/lsi/mpi_init.h7
-rw-r--r--drivers/message/fusion/lsi/mpi_ioc.h75
-rw-r--r--drivers/message/fusion/lsi/mpi_log_sas.h284
-rw-r--r--drivers/message/fusion/lsi/mpi_sas.h9
-rw-r--r--drivers/message/fusion/mptbase.c875
-rw-r--r--drivers/message/fusion/mptbase.h47
-rw-r--r--drivers/message/fusion/mptctl.c163
-rw-r--r--drivers/message/fusion/mptctl.h2
-rw-r--r--drivers/message/fusion/mptfc.c53
-rw-r--r--drivers/message/fusion/mptlan.c1
-rw-r--r--drivers/message/fusion/mptlan.h1
-rw-r--r--drivers/message/fusion/mptsas.c718
-rw-r--r--drivers/message/fusion/mptscsih.c997
-rw-r--r--drivers/message/fusion/mptscsih.h44
-rw-r--r--drivers/message/fusion/mptspi.c527
-rw-r--r--drivers/s390/scsi/zfcp_erp.c22
-rw-r--r--drivers/s390/scsi/zfcp_ext.h2
-rw-r--r--drivers/s390/scsi/zfcp_fsf.c23
-rw-r--r--drivers/scsi/53c700.c24
-rw-r--r--drivers/scsi/53c700.h2
-rw-r--r--drivers/scsi/53c7xx.c4
-rw-r--r--drivers/scsi/BusLogic.c46
-rw-r--r--drivers/scsi/BusLogic.h300
-rw-r--r--drivers/scsi/FlashPoint.c4
-rw-r--r--drivers/scsi/Kconfig9
-rw-r--r--drivers/scsi/Makefile1
-rw-r--r--drivers/scsi/NCR_D700.c1
-rw-r--r--drivers/scsi/aacraid/Makefile2
-rw-r--r--drivers/scsi/aacraid/aachba.c602
-rw-r--r--drivers/scsi/aacraid/aacraid.h46
-rw-r--r--drivers/scsi/aacraid/comminit.c14
-rw-r--r--drivers/scsi/aacraid/commsup.c40
-rw-r--r--drivers/scsi/aacraid/linit.c17
-rw-r--r--drivers/scsi/aacraid/nark.c87
-rw-r--r--drivers/scsi/aacraid/rkt.c64
-rw-r--r--drivers/scsi/aacraid/rx.c263
-rw-r--r--drivers/scsi/aacraid/sa.c33
-rw-r--r--drivers/scsi/advansys.c7
-rw-r--r--drivers/scsi/aic7xxx/aic79xx.h3
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_core.c5
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_osm.c9
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_osm.h2
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_osm_pci.c19
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_pci.c2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_dev.c16
-rw-r--r--drivers/scsi/aic94xx/aic94xx_dump.c2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_init.c49
-rw-r--r--drivers/scsi/aic94xx/aic94xx_reg_def.h5
-rw-r--r--drivers/scsi/aic94xx/aic94xx_sas.h1
-rw-r--r--drivers/scsi/aic94xx/aic94xx_scb.c122
-rw-r--r--drivers/scsi/aic94xx/aic94xx_sds.c10
-rw-r--r--drivers/scsi/aic94xx/aic94xx_seq.c45
-rw-r--r--drivers/scsi/aic94xx/aic94xx_seq.h1
-rw-r--r--drivers/scsi/aic94xx/aic94xx_task.c9
-rw-r--r--drivers/scsi/aic94xx/aic94xx_tmf.c4
-rw-r--r--drivers/scsi/ipr.c91
-rw-r--r--drivers/scsi/ipr.h4
-rw-r--r--drivers/scsi/lasi700.c1
-rw-r--r--drivers/scsi/libsas/sas_discover.c62
-rw-r--r--drivers/scsi/libsas/sas_event.c6
-rw-r--r--drivers/scsi/libsas/sas_expander.c48
-rw-r--r--drivers/scsi/libsas/sas_init.c52
-rw-r--r--drivers/scsi/libsas/sas_internal.h9
-rw-r--r--drivers/scsi/libsas/sas_port.c14
-rw-r--r--drivers/scsi/libsas/sas_scsi_host.c290
-rw-r--r--drivers/scsi/megaraid/mbox_defs.h2
-rw-r--r--drivers/scsi/megaraid/mega_common.h122
-rw-r--r--drivers/scsi/megaraid/megaraid_ioctl.h36
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c421
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.h46
-rw-r--r--drivers/scsi/megaraid/megaraid_mm.c65
-rw-r--r--drivers/scsi/megaraid/megaraid_sas.h14
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.h66
-rw-r--r--drivers/scsi/qla2xxx/qla_attr.c68
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h38
-rw-r--r--drivers/scsi/qla2xxx/qla_gbl.h6
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c218
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c245
-rw-r--r--drivers/scsi/qla2xxx/qla_mbx.c18
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c24
-rw-r--r--drivers/scsi/qla2xxx/qla_sup.c348
-rw-r--r--drivers/scsi/qla2xxx/qla_version.h2
-rw-r--r--drivers/scsi/scsi.c21
-rw-r--r--drivers/scsi/scsi_debug.c42
-rw-r--r--drivers/scsi/scsi_error.c256
-rw-r--r--drivers/scsi/scsi_lib.c4
-rw-r--r--drivers/scsi/scsi_priv.h6
-rw-r--r--drivers/scsi/scsi_scan.c2
-rw-r--r--drivers/scsi/scsi_transport_sas.c118
-rw-r--r--drivers/scsi/scsi_transport_spi.c1
-rw-r--r--drivers/scsi/sim710.c1
-rw-r--r--drivers/scsi/sni_53c710.c159
-rw-r--r--drivers/scsi/st.c23
-rw-r--r--drivers/scsi/st.h3
-rw-r--r--include/scsi/libsas.h19
-rw-r--r--include/scsi/scsi_transport_sas.h3
-rw-r--r--include/scsi/scsi_transport_spi.h1
104 files changed, 5827 insertions, 3135 deletions
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index a056bbe67c7..37796fe45bd 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,19 @@
+Release Date : Thu Nov 16 15:32:35 EST 2006 -
+ Sumant Patro <sumant.patro@lsi.com>
+Current Version : 2.20.5.1 (scsi module), 2.20.2.6 (cmm module)
+Older Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
+
+1. Changes in Initialization to fix kdump failure.
+ Send SYNC command on loading.
+ This command clears the pending commands in the adapter
+ and re-initialize its internal RAID structure.
+ Without this change, megaraid driver either panics or fails to
+ initialize the adapter during kdump's second kernel boot
+ if there are pending commands or interrupts from other devices
+ sharing the same IRQ.
+2. Authors email-id domain name changed from lsil.com to lsi.com.
+ Also modified the MODULE_AUTHOR to megaraidlinux@lsi.com
+
Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 6ad28dfb146..7b2fa3d8f61 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -1373,8 +1373,7 @@ static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
Controller->BounceBufferLimit = DAC690_V2_PciDmaMask;
/* This is a temporary dma mapping, used only in the scope of this function */
- CommandMailbox =
- (DAC960_V2_CommandMailbox_T *)pci_alloc_consistent( PCI_Device,
+ CommandMailbox = pci_alloc_consistent(PCI_Device,
sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
if (CommandMailbox == NULL)
return false;
@@ -1879,8 +1878,8 @@ static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
if (NewLogicalDeviceInfo->LogicalDeviceState !=
DAC960_V2_LogicalDevice_Offline)
Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
- LogicalDeviceInfo = (DAC960_V2_LogicalDeviceInfo_T *)
- kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), GFP_ATOMIC);
+ LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
+ GFP_ATOMIC);
if (LogicalDeviceInfo == NULL)
return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
@@ -2113,8 +2112,8 @@ static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
break;
- PhysicalDeviceInfo = (DAC960_V2_PhysicalDeviceInfo_T *)
- kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
+ PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
+ GFP_ATOMIC);
if (PhysicalDeviceInfo == NULL)
return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
@@ -2122,8 +2121,8 @@ static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- InquiryUnitSerialNumber = (DAC960_SCSI_Inquiry_UnitSerialNumber_T *)
- kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
+ InquiryUnitSerialNumber = kmalloc(
+ sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
if (InquiryUnitSerialNumber == NULL) {
kfree(PhysicalDeviceInfo);
return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
@@ -4949,8 +4948,8 @@ static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
PhysicalDevice;
- LogicalDeviceInfo = (DAC960_V2_LogicalDeviceInfo_T *)
- kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), GFP_ATOMIC);
+ LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
+ GFP_ATOMIC);
Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
LogicalDeviceInfo;
DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
@@ -5709,14 +5708,14 @@ static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
while (NewStatusBufferLength < ByteCount)
NewStatusBufferLength *= 2;
- Controller->CombinedStatusBuffer =
- (unsigned char *) kmalloc(NewStatusBufferLength, GFP_ATOMIC);
+ Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
+ GFP_ATOMIC);
if (Controller->CombinedStatusBuffer == NULL) return false;
Controller->CombinedStatusBufferLength = NewStatusBufferLength;
return true;
}
- NewStatusBuffer = (unsigned char *)
- kmalloc(2 * Controller->CombinedStatusBufferLength, GFP_ATOMIC);
+ NewStatusBuffer = kmalloc(2 * Controller->CombinedStatusBufferLength,
+ GFP_ATOMIC);
if (NewStatusBuffer == NULL)
{
DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index ea31d847051..71037f91c22 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -66,7 +66,7 @@ config FUSION_MAX_SGE
config FUSION_CTL
tristate "Fusion MPT misc device (ioctl) driver"
- depends on FUSION_SPI || FUSION_FC
+ depends on FUSION_SPI || FUSION_FC || FUSION_SAS
---help---
The Fusion MPT misc device driver provides specialized control
of MPT adapters via system ioctl calls. Use of ioctl calls to
diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 341691390e8..6003b46c843 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -8,6 +8,9 @@
#EXTRA_CFLAGS += -DMPT_DEBUG_INIT
#EXTRA_CFLAGS += -DMPT_DEBUG_EXIT
#EXTRA_CFLAGS += -DMPT_DEBUG_FAIL
+#EXTRA_CFLAGS += -DMPT_DEBUG_DV
+#EXTRA_CFLAGS += -DMPT_DEBUG_TM
+#EXTRA_CFLAGS += -DMPT_DEBUG_REPLY
#
# driver/module specifics...
@@ -20,11 +23,7 @@
#CFLAGS_mptbase.o += -DMPT_DEBUG_RESET
#
# For mptscsih:
-#CFLAGS_mptscsih.o += -DMPT_DEBUG_DV
-#CFLAGS_mptscsih.o += -DMPT_DEBUG_NEGO
-#CFLAGS_mptscsih.o += -DMPT_DEBUG_TM
#CFLAGS_mptscsih.o += -DMPT_DEBUG_SCSI
-#CFLAGS_mptscsih.o += -DMPT_DEBUG_REPLY
#
# For mptctl:
#CFLAGS_mptctl.o += -DMPT_DEBUG_IOCTL
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index 81ad77622da..75223bf24ae 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2005 LSI Logic Corporation.
+ * Copyright (c) 2000-2006 LSI Logic Corporation.
*
*
* Name: mpi.h
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * mpi.h Version: 01.05.11
+ * mpi.h Version: 01.05.12
*
* Version History
* ---------------
@@ -77,6 +77,7 @@
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
+ * 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -107,7 +108,7 @@
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x0D)
+#define MPI_HEADER_VERSION_UNIT (0x0E)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index 47e13e360c1..0e4c8e77a81 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2005 LSI Logic Corporation.
+ * Copyright (c) 2000-2006 LSI Logic Corporation.
*
*
* Name: mpi_cnfg.h
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
- * mpi_cnfg.h Version: 01.05.12
+ * mpi_cnfg.h Version: 01.05.13
*
* Version History
* ---------------
@@ -276,6 +276,23 @@
* Added AdditionalControlFlags, MaxTargetPortConnectTime,
* ReportDeviceMissingDelay, and IODeviceMissingDelay
* fields to SAS IO Unit Page 1.
+ * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
+ * Manufacturing Page 5.
+ * Added Manufacturing pages 8 through 10.
+ * Added defines for supported metadata size bits in
+ * CapabilitiesFlags field of IOC Page 6.
+ * Added defines for metadata size bits in VolumeSettings
+ * field of RAID Volume Page 0.
+ * Added SATA Link Reset settings, Enable SATA Asynchronous
+ * Notification bit, and HideNonZeroAttachedPhyIdentifiers
+ * bit to AdditionalControlFlags field of SAS IO Unit
+ * Page 1.
+ * Added defines for Enclosure Devices Unmapped and
+ * Device Limit Exceeded bits in Status field of SAS IO
+ * Unit Page 2.
+ * Added more AccessStatus values for SAS Device Page 0.
+ * Added bit for SATA Asynchronous Notification Support in
+ * Flags field of SAS Device Page 0.
* --------------------------------------------------------------------------
*/
@@ -654,17 +671,24 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_4
#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
+#ifndef MPI_MANPAGE5_NUM_FORCEWWID
+#define MPI_MANPAGE5_NUM_FORCEWWID (1)
+#endif
+
typedef struct _CONFIG_PAGE_MANUFACTURING_5
{
CONFIG_PAGE_HEADER Header; /* 00h */
U64 BaseWWID; /* 04h */
U8 Flags; /* 0Ch */
- U8 Reserved1; /* 0Dh */
+ U8 NumForceWWID; /* 0Dh */
U16 Reserved2; /* 0Eh */
+ U32 Reserved3; /* 10h */
+ U32 Reserved4; /* 14h */
+ U64 ForceWWID[MPI_MANPAGE5_NUM_FORCEWWID]; /* 18h */
} CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5,
ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t;
-#define MPI_MANUFACTURING5_PAGEVERSION (0x01)
+#define MPI_MANUFACTURING5_PAGEVERSION (0x02)
/* defines for the Flags field */
#define MPI_MANPAGE5_TWO_WWID_PER_PHY (0x01)
@@ -740,6 +764,36 @@ typedef struct _CONFIG_PAGE_MANUFACTURING_7
#define MPI_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
+typedef struct _CONFIG_PAGE_MANUFACTURING_8
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U32 ProductSpecificInfo;/* 04h */
+} CONFIG_PAGE_MANUFACTURING_8, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_8,
+ ManufacturingPage8_t, MPI_POINTER pManufacturingPage8_t;
+
+#define MPI_MANUFACTURING8_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_9
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U32 ProductSpecificInfo;/* 04h */
+} CONFIG_PAGE_MANUFACTURING_9, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_9,
+ ManufacturingPage9_t, MPI_POINTER pManufacturingPage9_t;
+
+#define MPI_MANUFACTURING6_PAGEVERSION (0x00)
+
+
+typedef struct _CONFIG_PAGE_MANUFACTURING_10
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U32 ProductSpecificInfo;/* 04h */
+} CONFIG_PAGE_MANUFACTURING_10, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_10,
+ ManufacturingPage10_t, MPI_POINTER pManufacturingPage10_t;
+
+#define MPI_MANUFACTURING10_PAGEVERSION (0x00)
+
+
/****************************************************************************
* IO Unit Config Pages
****************************************************************************/
@@ -1080,10 +1134,14 @@ typedef struct _CONFIG_PAGE_IOC_6
} CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6,
IOCPage6_t, MPI_POINTER pIOCPage6_t;
-#define MPI_IOCPAGE6_PAGEVERSION (0x00)
+#define MPI_IOCPAGE6_PAGEVERSION (0x01)
/* IOC Page 6 Capabilities Flags */
+#define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE (0x00000006)
+#define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE (0x00000000)
+#define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE (0x00000002)
+
#define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
@@ -2160,6 +2218,11 @@ typedef struct _RAID_VOL0_SETTINGS
#define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004)
#define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008)
#define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102 (0x0020) /* obsolete */
+
+#define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE (0x00C0)
+#define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE (0x0000)
+#define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE (0x0040)
+
#define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010)
#define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000)
@@ -2203,7 +2266,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
-#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x06)
+#define MPI_RAIDVOLPAGE0_PAGEVERSION (0x07)
/* values for RAID Volume Page 0 InactiveStatus field */
#define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
@@ -2518,7 +2581,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
-#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x06)
+#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x07)
/* values for SAS IO Unit Page 1 ControlFlags */
#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
@@ -2544,7 +2607,13 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
/* values for SAS IO Unit Page 1 AdditionalControlFlags */
-#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
+#define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
+#define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT (0x0020)
+#define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
+#define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
+#define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
+#define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
+#define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
#define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
@@ -2585,9 +2654,11 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
} CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
-#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x05)
+#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x06)
/* values for SAS IO Unit Page 2 Status field */
+#define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED (0x08)
+#define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED (0x04)
#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
#define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS (0x01)
@@ -2739,24 +2810,38 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_0
} CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0,
SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t;
-#define MPI_SASDEVICE0_PAGEVERSION (0x04)
+#define MPI_SASDEVICE0_PAGEVERSION (0x05)
/* values for SAS Device Page 0 AccessStatus field */
-#define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
-#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
-#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
+#define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
+/* specific values for SATA Init failures */
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
+#define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
/* values for SAS Device Page 0 Flags field */
-#define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
-#define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
-#define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
-#define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
-#define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
-#define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
-#define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
-#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004)
-#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002)
-#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
+#define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
+#define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
+#define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
+#define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004)
+#define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002)
+#define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
/* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 582cfe7c2aa..d6b4c607453 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -3,28 +3,28 @@
MPI Header File Change History
==============================
- Copyright (c) 2000-2005 LSI Logic Corporation.
+ Copyright (c) 2000-2006 LSI Logic Corporation.
---------------------------------------
- Header Set Release Version: 01.05.13
- Header Set Release Date: 03-27-06
+ Header Set Release Version: 01.05.14
+ Header Set Release Date: 10-11-06
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
- mpi.h 01.05.11 01.05.10
- mpi_ioc.h 01.05.11 01.05.10
- mpi_cnfg.h 01.05.12 01.05.11
- mpi_init.h 01.05.07 01.05.06
- mpi_targ.h 01.05.06 01.05.05
+ mpi.h 01.05.12 01.05.11
+ mpi_ioc.h 01.05.12 01.05.11
+ mpi_cnfg.h 01.05.13 01.05.12
+ mpi_init.h 01.05.08 01.05.07
+ mpi_targ.h 01.05.06 01.05.06
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
- mpi_sas.h 01.05.03 01.05.02
+ mpi_sas.h 01.05.04 01.05.03
mpi_type.h 01.05.02 01.05.02
- mpi_history.txt 01.05.13 01.05.12
+ mpi_history.txt 01.05.14 01.05.13
* Date Version Description
@@ -94,6 +94,7 @@ mpi.h
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
+ * 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
mpi_ioc.h
@@ -182,6 +183,14 @@ mpi_ioc.h
* Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
* data structure.
* Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
+ * 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
+ * Added MaxInitiators field to PortFacts reply.
+ * Added SAS Device Status Change ReasonCode for
+ * asynchronous notificaiton.
+ * Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
+ * data structure.
+ * Added new ImageType values for FWDownload and FWUpload
+ * requests.
* --------------------------------------------------------------------------
mpi_cnfg.h
@@ -447,6 +456,23 @@ mpi_cnfg.h
* Added AdditionalControlFlags, MaxTargetPortConnectTime,
* ReportDeviceMissingDelay, and IODeviceMissingDelay
* fields to SAS IO Unit Page 1.
+ * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
+ * Manufacturing Page 5.
+ * Added Manufacturing pages 8 through 10.
+ * Added defines for supported metadata size bits in
+ * CapabilitiesFlags field of IOC Page 6.
+ * Added defines for metadata size bits in VolumeSettings
+ * field of RAID Volume Page 0.
+ * Added SATA Link Reset settings, Enable SATA Asynchronous
+ * Notification bit, and HideNonZeroAttachedPhyIdentifiers
+ * bit to AdditionalControlFlags field of SAS IO Unit
+ * Page 1.
+ * Added defines for Enclosure Devices Unmapped and
+ * Device Limit Exceeded bits in Status field of SAS IO
+ * Unit Page 2.
+ * Added more AccessStatus values for SAS Device Page 0.
+ * Added bit for SATA Asynchronous Notification Support in
+ * Flags field of SAS Device Page 0.
* --------------------------------------------------------------------------
mpi_init.h
@@ -490,6 +516,7 @@ mpi_init.h
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
+ * 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
* --------------------------------------------------------------------------
mpi_targ.h
@@ -638,6 +665,8 @@ mpi_sas.h
* and Remove Device operations to SAS IO Unit Control.
* Added DevHandle field to SAS IO Unit Control request and
* reply.
+ * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
+ * Unit Control request.
* --------------------------------------------------------------------------
mpi_type.h
@@ -653,20 +682,20 @@ mpi_type.h
mpi_history.txt Parts list history
-Filename 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
----------- -------- -------- -------- -------- --------
-mpi.h 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
-mpi_ioc.h 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
-mpi_cnfg.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
-mpi_init.h 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
-mpi_targ.h 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
-mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
-mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
-mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
-mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
-mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
-mpi_sas.h 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
-mpi_type.h 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
+Filename 01.05.13 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
+---------- -------- -------- -------- -------- -------- --------
+mpi.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
+mpi_ioc.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
+mpi_cnfg.h 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
+mpi_init.h 01.05.08 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
+mpi_targ.h 01.05.06 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
+mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
+mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
+mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_sas.h 01.05.04 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
+mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
---------- -------- -------- -------- -------- -------- --------
diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h
index c1c678989a2..ec9dff2249a 100644
--- a/drivers/message/fusion/lsi/mpi_init.h
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2005 LSI Logic Corporation.
+ * Copyright (c) 2000-2006 LSI Logic Corporation.
*
*
* Name: mpi_init.h
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
- * mpi_init.h Version: 01.05.07
+ * mpi_init.h Version: 01.05.08
*
* Version History
* ---------------
@@ -53,6 +53,7 @@
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
+ * 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
* --------------------------------------------------------------------------
*/
@@ -428,7 +429,7 @@ typedef struct _MSG_SCSI_TASK_MGMT
#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
-#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08)
+#define MPI_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
/* MsgFlags bits */
#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index 18ba407fd39..6c33e335337 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2000-2005 LSI Logic Corporation.
+ * Copyright (c) 2000-2006 LSI Logic Corporation.
*
*
* Name: mpi_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
- * mpi_ioc.h Version: 01.05.11
+ * mpi_ioc.h Version: 01.05.12
*
* Version History
* ---------------
@@ -98,6 +98,14 @@
* Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
* data structure.
* Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
+ * 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
+ * Added MaxInitiators field to PortFacts reply.
+ * Added SAS Device Status Change ReasonCode for
+ * asynchronous notificaiton.
+ * Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
+ * data structure.
+ * Added new ImageType values for FWDownload and FWUpload
+ * requests.
* --------------------------------------------------------------------------
*/
@@ -264,6 +272,7 @@ typedef struct _MSG_IOC_FACTS_REPLY
#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
#define MPI_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
#define MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL (0x0008)
+#define MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT (0x01)
#define MPI_IOCFACTS_FLAGS_REPLY_FIFO_HOST_SIGNAL (0x02)
@@ -328,7 +337,8 @@ typedef struct _MSG_PORT_FACTS_REPLY
U16 MaxPostedCmdBuffers; /* 1Ch */
U16 MaxPersistentIDs; /* 1Eh */
U16 MaxLanBuckets; /* 20h */
- U16 Reserved4; /* 22h */
+ U8 MaxInitiators; /* 22h */
+ U8 Reserved4; /* 23h */
U32 Reserved5; /* 24h */
} MSG_PORT_FACTS_REPLY, MPI_POINTER PTR_MSG_PORT_FACTS_REPLY,
PortFactsReply_t, MPI_POINTER pPortFactsReply_t;
@@ -487,6 +497,7 @@ typedef struct _MSG_EVENT_ACK_REPLY
#define MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x00000018)
#define MPI_EVENT_SAS_INIT_TABLE_OVERFLOW (0x00000019)
#define MPI_EVENT_SAS_SMP_ERROR (0x0000001A)
+#define MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE (0x0000001B)
#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021)
/* AckRequired field values */
@@ -593,6 +604,7 @@ typedef struct _EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
#define MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
+#define MPI_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
/* SCSI Event data for Queue Full event */
@@ -895,6 +907,54 @@ typedef struct _EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
MpiEventDataSasInitTableOverflow_t,
MPI_POINTER pMpiEventDataSasInitTableOverflow_t;
+/* SAS Expander Status Change Event data */
+
+typedef struct _EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE
+{
+ U8 ReasonCode; /* 00h */
+ U8 Reserved1; /* 01h */
+ U16 Reserved2; /* 02h */
+ U8 PhysicalPort; /* 04h */
+ U8 Reserved3; /* 05h */
+ U16 EnclosureHandle; /* 06h */
+ U64 SASAddress; /* 08h */
+ U32 DiscoveryStatus; /* 10h */
+ U16 DevHandle; /* 14h */
+ U16 ParentDevHandle; /* 16h */
+ U16 ExpanderChangeCount; /* 18h */
+ U16 ExpanderRouteIndexes; /* 1Ah */
+ U8 NumPhys; /* 1Ch */
+ U8 SASLevel; /* 1Dh */
+ U8 Flags; /* 1Eh */
+ U8 Reserved4; /* 1Fh */
+} EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE,
+ MPI_POINTER PTR_EVENT_DATA_SAS_EXPANDER_STATUS_CHANGE,
+ MpiEventDataSasExpanderStatusChange_t,
+ MPI_POINTER pMpiEventDataSasExpanderStatusChange_t;
+
+/* values for ReasonCode field of SAS Expander Status Change Event data */
+#define MPI_EVENT_SAS_EXP_RC_ADDED (0x00)
+#define MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING (0x01)
+
+/* values for DiscoveryStatus field of SAS Expander Status Change Event data */
+#define MPI_EVENT_SAS_EXP_DS_LOOP_DETECTED (0x00000001)
+#define MPI_EVENT_SAS_EXP_DS_UNADDRESSABLE_DEVICE (0x00000002)
+#define MPI_EVENT_SAS_EXP_DS_MULTIPLE_PORTS (0x00000004)
+#define MPI_EVENT_SAS_EXP_DS_EXPANDER_ERR (0x00000008)
+#define MPI_EVENT_SAS_EXP_DS_SMP_TIMEOUT (0x00000010)
+#define MPI_EVENT_SAS_EXP_DS_OUT_ROUTE_ENTRIES (0x00000020)
+#define MPI_EVENT_SAS_EXP_DS_INDEX_NOT_EXIST (0x00000040)
+#define MPI_EVENT_SAS_EXP_DS_SMP_FUNCTION_FAILED (0x00000080)
+#define MPI_EVENT_SAS_EXP_DS_SMP_CRC_ERROR (0x00000100)
+#define MPI_EVENT_SAS_EXP_DS_SUBTRACTIVE_LINK (0x00000200)
+#define MPI_EVENT_SAS_EXP_DS_TABLE_LINK (0x00000400)
+#define MPI_EVENT_SAS_EXP_DS_UNSUPPORTED_DEVICE (0x00000800)
+
+/* values for Flags field of SAS Expander Status Change Event data */
+#define MPI_EVENT_SAS_EXP_FLAGS_ROUTE_TABLE_CONFIG (0x02)
+#define MPI_EVENT_SAS_EXP_FLAGS_CONFIG_IN_PROGRESS (0x01)
+
+
/*****************************************************************************
*
@@ -926,6 +986,10 @@ typedef struct _MSG_FW_DOWNLOAD
#define MPI_FW_DOWNLOAD_ITYPE_BIOS (0x02)
#define MPI_FW_DOWNLOAD_ITYPE_NVDATA (0x03)
#define MPI_FW_DOWNLOAD_ITYPE_BOOTLOADER (0x04)
+#define MPI_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
+#define MPI_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
+#define MPI_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
+#define MPI_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
typedef struct _FWDownloadTCSGE
@@ -980,6 +1044,11 @@ typedef struct _MSG_FW_UPLOAD
#define MPI_FW_UPLOAD_ITYPE_NVDATA (0x03)
#define MPI_FW_UPLOAD_ITYPE_BOOTLOADER (0x04)
#define MPI_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
+#define MPI_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
+#define MPI_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
+#define MPI_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
+#define MPI_FW_UPLOAD_ITYPE_MEGARAID (0x09)
+#define MPI_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
typedef struct _FWUploadTCSGE
{
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 871ebc08b70..635bbe04513 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -1,4 +1,3 @@
-
/***************************************************************************
* *
* Copyright 2003 LSI Logic Corporation. All rights reserved. *
@@ -14,7 +13,7 @@
#define IOPI_IOCLOGINFO_H_INCLUDED
#define SAS_LOGINFO_NEXUS_LOSS 0x31170000
-#define SAS_LOGINFO_MASK 0xFFFF0000
+#define SAS_LOGINFO_MASK 0xFFFF0000
/****************************************************************************/
/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */
@@ -43,129 +42,172 @@
/****************************************************************************/
/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */
/****************************************************************************/
-#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
-#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
-#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
-
-#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
-
-#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
-
-#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
-#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
-
-#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001)
-#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002)
-#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003)
-#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
-#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
+#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
+#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
+
+#define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE (0x0003E000) /* Tried to upload from flash, but there is none */
+#define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE (0x0003E001) /* ImageType field contents were invalid */
+#define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occured while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occured while DMAing FW to host memory */
+
+#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
+
+#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
+
+#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
+#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
+
+#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001)
+#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
/****************************************************************************/
/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
/****************************************************************************/
-#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000)
-#define PL_LOG_INFO_CODE_OPEN_FAILURE_NO_DEST_TIME_OUT (0x00010001)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_BAD_DESTINATION (0x00010011)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_PROTOCOL_NOT_SUPPORTED (0x00010013)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_STP_RESOURCES_BSY (0x00010018)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_WRONG_DESTINATION (0x00010019)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_ORR_TIMEOUT (0X0001001A)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0001001B)
-#define PL_LOGINFO_CODE_OPEN_FAILURE_AWT_MAXED (0x0001001C)
-#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
-#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
-#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
-#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
-#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
-#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
-#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
-#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
-#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
-#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
-#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
-#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
-#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
-#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
-#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
-#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
-#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below */
-#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below */
-#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
-#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
-#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
-#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
-#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000)
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0000011B)
-#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */
-
-#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120)
-#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */
-#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */
-
-
-#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
-#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
-#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
-#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
-#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
-#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
-#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
-#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
-#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
-#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
-#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
-#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
-#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
-#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
-#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
-#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
-
-
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
-#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
-#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
-#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */
-#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */
-#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */
-
-#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
-#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
-#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
-#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
-#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
-#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */
-#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode */
+#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) /* see SUB_CODE_OPEN_FAIL_ below */
+
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_NO_DEST_TIME_OUT (0x00000001)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATHWAY_BLOCKED (0x00000002)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE0 (0x00000003)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE1 (0x00000004)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE0 (0x00000005)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE1 (0x00000006)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP0 (0x00000007)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP1 (0x00000008)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RETRY (0x00000009)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BREAK (0x0000000A)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0B (0x0000000B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP (0x0000000C)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D (0x0000000D)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL (0x0000000E)
+#define PL_LOGINFO_SUB CODE_OPEN_FAIL_BAD_DEST (0x00000011)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP (0x00000012)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP (0x00000013)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0 (0x00000014)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON1 (0x00000015)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON2 (0x00000016)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON3 (0x00000017)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_STP_RESOURCES_BSY (0x00000018)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_WRONG_DESTINATION (0x00000019)
+
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATH_BLOCKED (0x0000001B) /* Retry Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_AWT_MAXED (0x0000001C) /* Retry Timeout */
+
+
+
+#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
+#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
+#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
+#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
+#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
+#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
+#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
+#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
+#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
+#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
+#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
+#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
+#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
+#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
+#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
+#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE) */
+#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE)*/
+#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
+#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
+#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
+#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
+#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000)
+#define PL_LOGINFO_CODE_IO_CANCELLED_DUE_TO_R_ERR (0x00180000)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_SATA_NEG_RATE_2HI (0x00000102)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_RATE_NOT_SUPPORTED (0x00000103)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_BREAK (0x00000104)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ZONE_VIOLATION (0x00000114)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON0 (0x00000114) /* Open Reject (Zone Violation) - available on SAS-2 devices */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON1 (0x00000115)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON2 (0x00000116)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON3 (0x00000117)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATH_BLOCKED (0x0000011B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */
+
+#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120)
+#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */
+#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */
+
+
+#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
+#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */
+ /* Bit 0 is Status Bit 0: FrameXferErr */
+ /* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
+ /* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
+
+#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
+#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
+#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
+#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
+#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
+#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
+#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
+#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
+#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
+#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
+#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
+
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
+#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
+#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */
+
+#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
+#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
+#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
+#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
+#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
+#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode f/w location 1 */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_2 (0x0020010D) /* SEP doesn't support CDB opcode f/w location 2 */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_3 (0x0020010E) /* SEP doesn't support CDB opcode f/w location 3 */
/****************************************************************************/
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h
index 50b8f0a8f45..8e990a0fa7a 100644
--- a/drivers/message/fusion/lsi/mpi_sas.h
+++ b/drivers/message/fusion/lsi/mpi_sas.h
@@ -1,12 +1,12 @@
/*
- * Copyright (c) 2004 LSI Logic Corporation.
+ * Copyright (c) 2004-2006 LSI Logic Corporation.
*
*
* Name: mpi_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: August 19, 2004
*
- * mpi_sas.h Version: 01.05.03
+ * mpi_sas.h Version: 01.05.04
*
* Version History
* ---------------
@@ -21,6 +21,8 @@
* and Remove Device operations to SAS IO Unit Control.
* Added DevHandle field to SAS IO Unit Control request and
* reply.
+ * 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
+ * Unit Control request.
* --------------------------------------------------------------------------
*/
@@ -237,7 +239,8 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
-#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D)
+#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
+#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
/* values for the PrimFlags field */
#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index b3f28a03b6a..083acfd91d8 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -6,7 +6,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -82,6 +82,10 @@ static int mpt_msi_enable;
module_param(mpt_msi_enable, int, 0);
MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
+static int mpt_channel_mapping;
+module_param(mpt_channel_mapping, int, 0);
+MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
+
#ifdef MFCNT
static int mfcounter = 0;
#define PRINT_MF_COUNT 20000
@@ -173,11 +177,14 @@ static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
//int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
-static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
+#ifdef MPT_DEBUG_REPLY
+static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
+#endif
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
+static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
/* module entry point */
static int __init fusion_init (void);
@@ -319,13 +326,11 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa)
else if (ioc->bus_type == SAS)
mpt_sas_log_info(ioc, log_info);
}
- if (ioc_stat & MPI_IOCSTATUS_MASK) {
- if (ioc->bus_type == SPI &&
- cb_idx != mpt_stm_index &&
- cb_idx != mpt_lan_index)
- mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
- }
+#ifdef MPT_DEBUG_REPLY
+ if (ioc_stat & MPI_IOCSTATUS_MASK)
+ mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
+#endif
/* Check for (valid) IO callback! */
if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
@@ -911,7 +916,7 @@ mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
int
mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
{
- int r = 0;
+ int r = 0;
u8 *req_as_bytes;
int ii;
@@ -1811,6 +1816,13 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
* and we try GetLanConfigPages again...
*/
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
+
+ /*
+ * Initalize link list for inactive raid volumes.
+ */
+ init_MUTEX(&ioc->raid_data.inactive_list_mutex);
+ INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
+
if (ioc->bus_type == SAS) {
/* clear persistency table */
@@ -2017,6 +2029,8 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
}
kfree(ioc->spi_data.nvram);
+ mpt_inactive_raid_list_free(ioc);
+ kfree(ioc->raid_data.pIocPg2);
kfree(ioc->raid_data.pIocPg3);
ioc->spi_data.nvram = NULL;
ioc->raid_data.pIocPg3 = NULL;
@@ -2413,6 +2427,9 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
facts->ProductID = le16_to_cpu(facts->ProductID);
+ if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
+ ioc->ir_firmware = 1;
facts->CurrentHostMfaHighAddr =
le32_to_cpu(facts->CurrentHostMfaHighAddr);
facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
@@ -2505,6 +2522,7 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
int ii;
int req_sz;
int reply_sz;
+ int max_id;
/* IOC *must* NOT be in RESET state! */
if (ioc->last_state == MPI_IOC_STATE_RESET) {
@@ -2552,6 +2570,21 @@ GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
+ max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
+ pfacts->MaxDevices;
+ ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
+ ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
+
+ /*
+ * Place all the devices on channels
+ *
+ * (for debuging)
+ */
+ if (mpt_channel_mapping) {
+ ioc->devices_per_bus = 1;
+ ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
+ }
+
return 0;
}
@@ -2592,13 +2625,8 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n",
ioc->name, ioc->upload_fw, ioc->facts.Flags));
- if(ioc->bus_type == SAS)
- ioc_init.MaxDevices = ioc->facts.MaxDevices;
- else if(ioc->bus_type == FC)
- ioc_init.MaxDevices = MPT_MAX_FC_DEVICES;
- else
- ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES;
- ioc_init.MaxBuses = MPT_MAX_BUS;
+ ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
+ ioc_init.MaxBuses = (U8)ioc->number_of_buses;
dinitprintk((MYIOC_s_INFO_FMT "facts.MsgVersion=%x\n",
ioc->name, ioc->facts.MsgVersion));
if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
@@ -2720,9 +2748,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
/* RAID FW may take a long time to enable
*/
- if (((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
- > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) ||
- (ioc->bus_type == SAS)) {
+ if (ioc->ir_firmware || ioc->bus_type == SAS) {
rc = mpt_handshake_req_reply_wait(ioc, req_sz,
(u32*)&port_enable, reply_sz, (u16*)&reply_buf,
300 /*seconds*/, sleepFlag);
@@ -3193,6 +3219,9 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
u32 diag1val = 0;
#endif
+ /* Clear any existing interrupts */
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
drsprintk((MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
"address=%p\n", ioc->name, __FUNCTION__,
@@ -3212,7 +3241,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
" count=%d\n",
ioc->name, doorbell, count));
if (doorbell == MPI_IOC_STATE_READY) {
- return 0;
+ return 1;
}
/* wait 1 sec */
@@ -3224,9 +3253,6 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
return -1;
}
- /* Clear any existing interrupts */
- CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-
/* Use "Diagnostic reset" method! (only thing available!) */
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
@@ -3942,7 +3968,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
}
} else {
while (--cntdn) {
- mdelay (1);
+ udelay (1000);
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
break;
@@ -3994,7 +4020,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
break;
- mdelay(1);
+ udelay (1000);
count++;
}
}
@@ -4310,8 +4336,8 @@ mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
(reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
- printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d\n",
- ioc->name, disk);
+ printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
+ ioc->name, disk, volume);
} else {
printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
ioc->name, volume);
@@ -4712,7 +4738,187 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
return 0;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_inactive_raid_list_free
+ *
+ * This clears this link list.
+ *
+ * @ioc - pointer to per adapter structure
+ *
+ **/
+static void
+mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
+{
+ struct inactive_raid_component_info *component_info, *pNext;
+
+ if (list_empty(&ioc->raid_data.inactive_list))
+ return;
+
+ down(&ioc->raid_data.inactive_list_mutex);
+ list_for_each_entry_safe(component_info, pNext,
+ &ioc->raid_data.inactive_list, list) {
+ list_del(&component_info->list);
+ kfree(component_info);
+ }
+ up(&ioc->raid_data.inactive_list_mutex);
+}
+
+/**
+ * mpt_inactive_raid_volumes
+ *
+ * This sets up link list of phy_disk_nums for devices belonging in an inactive volume
+ *
+ * @ioc - pointer to per adapter structure
+ * @channel - volume channel
+ * @id - volume target id
+ *
+ *
+ **/
+static void
+mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidVolumePage0_t buffer = NULL;
+ int i;
+ RaidPhysDiskPage0_t phys_disk;
+ struct inactive_raid_component_info *component_info;
+ int handle_inactive_volumes;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
+ cfg.pageAddr = (channel << 8) + id;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!hdr.PageLength)
+ goto out;
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer)
+ goto out;
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!buffer->NumPhysDisks)
+ goto out;
+
+ handle_inactive_volumes =
+ (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
+ (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
+ buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
+ buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
+
+ if (!handle_inactive_volumes)
+ goto out;
+
+ down(&ioc->raid_data.inactive_list_mutex);
+ for (i = 0; i < buffer->NumPhysDisks; i++) {
+ if(mpt_raid_phys_disk_pg0(ioc,
+ buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
+ continue;
+
+ if ((component_info = kmalloc(sizeof (*component_info),
+ GFP_KERNEL)) == NULL)
+ continue;
+
+ component_info->volumeID = id;
+ component_info->volumeBus = channel;
+ component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
+ component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
+ component_info->d.PhysDiskID = phys_disk.PhysDiskID;
+ component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
+
+ list_add_tail(&component_info->list,
+ &ioc->raid_data.inactive_list);
+ }
+ up(&ioc->raid_data.inactive_list_mutex);
+
+ out:
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+}
+
+/**
+ * mpt_raid_phys_disk_pg0 - returns phys disk page zero
+ * @ioc: Pointer to a Adapter Structure
+ * @phys_disk_num: io unit unique phys disk num generated by the ioc
+ * @phys_disk: requested payload data returned
+ *
+ * Return:
+ * 0 on success
+ * -EFAULT if read of config page header fails or data pointer not NULL
+ * -ENOMEM if pci_alloc failed
+ **/
+int
+mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidPhysDiskPage0_t buffer = NULL;
+ int rc;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ if (!hdr.PageLength) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.pageAddr = phys_disk_num;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ rc = 0;
+ memcpy(phys_disk, buffer, sizeof(*buffer));
+ phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
+
+ out:
+
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+
+ return rc;
+}
+
/**
* mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
* @ioc: Pointer to a Adapter Strucutre
@@ -4722,21 +4928,27 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
* 0 on success
* -EFAULT if read of config page header fails or data pointer not NULL
* -ENOMEM if pci_alloc failed
- */
+ **/
int
mpt_findImVolumes(MPT_ADAPTER *ioc)
{
IOCPage2_t *pIoc2;
u8 *mem;
- ConfigPageIoc2RaidVol_t *pIocRv;
dma_addr_t ioc2_dma;
CONFIGPARMS cfg;
ConfigPageHeader_t header;
- int jj;
int rc = 0;
int iocpage2sz;
- u8 nVols, nPhys;
- u8 vid, vbus, vioc;
+ int i;
+
+ if (!ioc->ir_firmware)
+ return 0;
+
+ /* Free the old page
+ */
+ kfree(ioc->raid_data.pIocPg2);
+ ioc->raid_data.pIocPg2 = NULL;
+ mpt_inactive_raid_list_free(ioc);
/* Read IOCP2 header then the page.
*/
@@ -4764,55 +4976,23 @@ mpt_findImVolumes(MPT_ADAPTER *ioc)
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
cfg.physAddr = ioc2_dma;
if (mpt_config(ioc, &cfg) != 0)
- goto done_and_free;
+ goto out;
+
+ mem = kmalloc(iocpage2sz, GFP_KERNEL);
+ if (!mem)
+ goto out;
- if ( (mem = (u8 *)ioc->raid_data.pIocPg2) == NULL ) {
- mem = kmalloc(iocpage2sz, GFP_ATOMIC);
- if (mem) {
- ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
- } else {
- goto done_and_free;
- }
- }
memcpy(mem, (u8 *)pIoc2, iocpage2sz);
+ ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
- /* Identify RAID Volume Id's */
- nVols = pIoc2->NumActiveVolumes;
- if ( nVols == 0) {
- /* No RAID Volume.
- */
- goto done_and_free;
- } else {
- /* At least 1 RAID Volume
- */
- pIocRv = pIoc2->RaidVolume;
- ioc->raid_data.isRaid = 0;
- for (jj = 0; jj < nVols; jj++, pIocRv++) {
- vid = pIocRv->VolumeID;
- vbus = pIocRv->VolumeBus;
- vioc = pIocRv->VolumeIOC;
-
- /* find the match
- */
- if (vbus == 0) {
- ioc->raid_data.isRaid |= (1 << vid);
- } else {
- /* Error! Always bus 0
- */
- }
- }
- }
+ mpt_read_ioc_pg_3(ioc);
- /* Identify Hidden Physical Disk Id's */
- nPhys = pIoc2->NumActivePhysDisks;
- if (nPhys == 0) {
- /* No physical disks.
- */
- } else {
- mpt_read_ioc_pg_3(ioc);
- }
+ for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
+ mpt_inactive_raid_volumes(ioc,
+ pIoc2->RaidVolume[i].VolumeBus,
+ pIoc2->RaidVolume[i].VolumeID);
-done_and_free:
+ out:
pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
return rc;
@@ -4865,7 +5045,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
cfg.physAddr = ioc3_dma;
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
if (mpt_config(ioc, &cfg) == 0) {
- mem = kmalloc(iocpage3sz, GFP_ATOMIC);
+ mem = kmalloc(iocpage3sz, GFP_KERNEL);
if (mem) {
memcpy(mem, (u8 *)pIoc3, iocpage3sz);
ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
@@ -5679,8 +5859,6 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
return rc;
}
-# define EVENT_DESCR_STR_SZ 100
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static void
EventDescriptionStr(u8 event, u32 evData0, char *evStr)
@@ -5708,9 +5886,6 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
break;
case MPI_EVENT_RESCAN:
ds = "Bus Rescan Event";
- /* Ok, do we need to do anything here? As far as
- I can tell, this is when a new device gets added
- to the loop. */
break;
case MPI_EVENT_LINK_STATUS_CHANGE:
if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
@@ -5787,48 +5962,63 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
{
u8 id = (u8)(evData0);
+ u8 channel = (u8)(evData0 >> 8);
u8 ReasonCode = (u8)(evData0 >> 16);
switch (ReasonCode) {
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Added: id=%d", id);
+ "SAS Device Status Change: Added: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Deleted: id=%d", id);
+ "SAS Device Status Change: Deleted: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: SMART Data: id=%d",
- id);
+ "SAS Device Status Change: SMART Data: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: No Persistancy: id=%d", id);
+ "SAS Device Status Change: No Persistancy: "
+ "id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Unsupported Device "
+ "Discovered : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Device Reset : id=%d", id);
+ "SAS Device Status Change: Internal Device "
+ "Reset : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Task Abort : id=%d", id);
+ "SAS Device Status Change: Internal Task "
+ "Abort : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Abort Task Set : id=%d", id);
+ "SAS Device Status Change: Internal Abort "
+ "Task Set : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Clear Task Set : id=%d", id);
+ "SAS Device Status Change: Internal Clear "
+ "Task Set : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Query Task : id=%d", id);
+ "SAS Device Status Change: Internal Query "
+ "Task : id=%d channel=%d", id, channel);
break;
default:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Unknown: id=%d", id);
+ "SAS Device Status Change: Unknown: "
+ "id=%d channel=%d", id, channel);
break;
}
break;
@@ -5837,8 +6027,16 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
ds = "Bus Timer Expired";
break;
case MPI_EVENT_QUEUE_FULL:
- ds = "Queue Full";
+ {
+ u16 curr_depth = (u16)(evData0 >> 16);
+ u8 channel = (u8)(evData0 >> 8);
+ u8 id = (u8)(evData0);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "Queue Full: channel=%d id=%d depth=%d",
+ channel, id, curr_depth);
break;
+ }
case MPI_EVENT_SAS_SES:
ds = "SAS SES Event";
break;
@@ -5942,6 +6140,76 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
ds = "SAS Log Entry Added";
break;
+ case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+ {
+ u8 phy_num = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u8 port_width = (u8)(evData0 >> 16);
+ u8 primative = (u8)(evData0 >> 24);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Broadcase Primative: phy=%d port=%d "
+ "width=%d primative=0x%02x",
+ phy_num, port_num, port_width, primative);
+ break;
+ }
+
+ case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+ {
+ u8 reason = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u16 handle = le16_to_cpu(evData0 >> 16);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Initiator Device Status Change: reason=0x%02x "
+ "port=%d handle=0x%04x",
+ reason, port_num, handle);
+ break;
+ }
+
+ case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
+ {
+ u8 max_init = (u8)(evData0);
+ u8 current_init = (u8)(evData0 >> 8);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Initiator Device Table Overflow: max initiators=%02d "
+ "current initators=%02d",
+ max_init, current_init);
+ break;
+ }
+ case MPI_EVENT_SAS_SMP_ERROR:
+ {
+ u8 status = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u8 result = (u8)(evData0 >> 16);
+
+ if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d result=0x%02x",
+ port_num, result);
+ else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : CRC Error",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : Timeout",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : No Destination",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : Bad Destination",
+ port_num);
+ else
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : status=0x%02x",
+ port_num, status);
+ break;
+ }
+
/*
* MPT base "custom" events may be added here...
*/
@@ -6205,10 +6473,11 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
"Abort", /* 12h */
"IO Not Yet Executed", /* 13h */
"IO Executed", /* 14h */
- "Persistent Reservation Out Not Affiliation Owner", /* 15h */
+ "Persistent Reservation Out Not Affiliation "
+ "Owner", /* 15h */
"Open Transmit DMA Abort", /* 16h */
"IO Device Missing Delay Retry", /* 17h */
- NULL, /* 18h */
+ "IO Cancelled Due to Recieve Error", /* 18h */
NULL, /* 19h */
NULL, /* 1Ah */
NULL, /* 1Bh */
@@ -6218,6 +6487,96 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
NULL, /* 1Fh */
"Enclosure Management" /* 20h */
};
+ static char *ir_code_str[] = {
+ "Raid Action Error", /* 00h */
+ NULL, /* 00h */
+ NULL, /* 01h */
+ NULL, /* 02h */
+ NULL, /* 03h */
+ NULL, /* 04h */
+ NULL, /* 05h */
+ NULL, /* 06h */
+ NULL /* 07h */
+ };
+ static char *raid_sub_code_str[] = {
+ NULL, /* 00h */
+ "Volume Creation Failed: Data Passed too "
+ "Large", /* 01h */
+ "Volume Creation Failed: Duplicate Volumes "
+ "Attempted", /* 02h */
+ "Volume Creation Failed: Max Number "
+ "Supported Volumes Exceeded", /* 03h */
+ "Volume Creation Failed: DMA Error", /* 04h */
+ "Volume Creation Failed: Invalid Volume Type", /* 05h */
+ "Volume Creation Failed: Error Reading "
+ "MFG Page 4", /* 06h */
+ "Volume Creation Failed: Creating Internal "
+ "Structures", /* 07h */
+ NULL, /* 08h */
+ NULL, /* 09h */
+ NULL, /* 0Ah */
+ NULL, /* 0Bh */
+ NULL, /* 0Ch */
+ NULL, /* 0Dh */
+ NULL, /* 0Eh */
+ NULL, /* 0Fh */
+ "Activation failed: Already Active Volume", /* 10h */
+ "Activation failed: Unsupported Volume Type", /* 11h */
+ "Activation failed: Too Many Active Volumes", /* 12h */
+ "Activation failed: Volume ID in Use", /* 13h */
+ "Activation failed: Reported Failure", /* 14h */
+ "Activation failed: Importing a Volume", /* 15h */
+ NULL, /* 16h */
+ NULL, /* 17h */
+ NULL, /* 18h */
+ NULL, /* 19h */
+ NULL, /* 1Ah */
+ NULL, /* 1Bh */
+ NULL, /* 1Ch */
+ NULL, /* 1Dh */
+ NULL, /* 1Eh */
+ NULL, /* 1Fh */
+ "Phys Disk failed: Too Many Phys Disks", /* 20h */
+ "Phys Disk failed: Data Passed too Large", /* 21h */
+ "Phys Disk failed: DMA Error", /* 22h */
+ "Phys Disk failed: Invalid <channel:id>", /* 23h */
+ "Phys Disk failed: Creating Phys Disk Config "
+ "Page", /* 24h */
+ NULL, /* 25h */
+ NULL, /* 26h */
+ NULL, /* 27h */
+ NULL, /* 28h */
+ NULL, /* 29h */
+ NULL, /* 2Ah */
+ NULL, /* 2Bh */
+ NULL, /* 2Ch */
+ NULL, /* 2Dh */
+ NULL, /* 2Eh */
+ NULL, /* 2Fh */
+ "Compatibility Error: IR Disabled", /* 30h */
+ "Compatibility Error: Inquiry Comand Failed", /* 31h */
+ "Compatibility Error: Device not Direct Access "
+ "Device ", /* 32h */
+ "Compatibility Error: Removable Device Found", /* 33h */
+ "Compatibility Error: Device SCSI Version not "
+ "2 or Higher", /* 34h */
+ "Compatibility Error: SATA Device, 48 BIT LBA "
+ "not Supported", /* 35h */
+ "Compatibility Error: Device doesn't have "
+ "512 Byte Block Sizes", /* 36h */
+ "Compatibility Error: Volume Type Check Failed", /* 37h */
+ "Compatibility Error: Volume Type is "
+ "Unsupported by FW", /* 38h */
+ "Compatibility Error: Disk Drive too Small for "
+ "use in Volume", /* 39h */
+ "Compatibility Error: Phys Disk for Create "
+ "Volume not Found", /* 3Ah */
+ "Compatibility Error: Too Many or too Few "
+ "Disks for Volume Type", /* 3Bh */
+ "Compatibility Error: Disk stripe Sizes "
+ "Must be 64KB", /* 3Ch */
+ "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
+ };
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
@@ -6226,7 +6585,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
* @log_info: U32 LogInfo reply word from the IOC
*
* Refer to lsi/mpi_log_sas.h.
- */
+ **/
static void
mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info)
{
@@ -6240,56 +6599,165 @@ union loginfo_type {
}dw;
};
union loginfo_type sas_loginfo;
+ char *originator_desc = NULL;
char *code_desc = NULL;
+ char *sub_code_desc = NULL;
sas_loginfo.loginfo = log_info;
if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
(sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*)))
return;
- if ((sas_loginfo.dw.originator == 0 /*IOP*/) &&
- (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) {
- code_desc = iop_code_str[sas_loginfo.dw.code];
- }else if ((sas_loginfo.dw.originator == 1 /*PL*/) &&
- (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) {
- code_desc = pl_code_str[sas_loginfo.dw.code];
+
+ originator_desc = originator_str[sas_loginfo.dw.originator];
+
+ switch (sas_loginfo.dw.originator) {
+
+ case 0: /* IOP */
+ if (sas_loginfo.dw.code <
+ sizeof(iop_code_str)/sizeof(char*))
+ code_desc = iop_code_str[sas_loginfo.dw.code];
+ break;
+ case 1: /* PL */
+ if (sas_loginfo.dw.code <
+ sizeof(pl_code_str)/sizeof(char*))
+ code_desc = pl_code_str[sas_loginfo.dw.code];
+ break;
+ case 2: /* IR */
+ if (sas_loginfo.dw.code >=
+ sizeof(ir_code_str)/sizeof(char*))
+ break;
+ code_desc = ir_code_str[sas_loginfo.dw.code];
+ if (sas_loginfo.dw.subcode >=
+ sizeof(raid_sub_code_str)/sizeof(char*))
+ break;
+ if (sas_loginfo.dw.code == 0)
+ sub_code_desc =
+ raid_sub_code_str[sas_loginfo.dw.subcode];
+ break;
+ default:
+ return;
}
- if (code_desc != NULL)
+ if (sub_code_desc != NULL)
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code={%s},"
+ " SubCode={%s}\n",
+ ioc->name, log_info, originator_desc, code_desc,
+ sub_code_desc);
+ else if (code_desc != NULL)
printk(MYIOC_s_INFO_FMT
"LogInfo(0x%08x): Originator={%s}, Code={%s},"
" SubCode(0x%04x)\n",
- ioc->name,
- log_info,
- originator_str[sas_loginfo.dw.originator],
- code_desc,
+ ioc->name, log_info, originator_desc, code_desc,
sas_loginfo.dw.subcode);
else
printk(MYIOC_s_INFO_FMT
"LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
" SubCode(0x%04x)\n",
- ioc->name,
- log_info,
- originator_str[sas_loginfo.dw.originator],
- sas_loginfo.dw.code,
- sas_loginfo.dw.subcode);
+ ioc->name, log_info, originator_desc,
+ sas_loginfo.dw.code, sas_loginfo.dw.subcode);
}
+#ifdef MPT_DEBUG_REPLY
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
+ * mpt_iocstatus_info_config - IOCSTATUS information for config pages
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * ioc_status: U32 IOCStatus word from IOC
+ * @mf: Pointer to MPT request frame
+ *
+ * Refer to lsi/mpi.h.
+ **/
+static void
+mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+{
+ Config_t *pReq = (Config_t *)mf;
+ char extend_desc[EVENT_DESCR_STR_SZ];
+ char *desc = NULL;
+ u32 form;
+ u8 page_type;
+
+ if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
+ page_type = pReq->ExtPageType;
+ else
+ page_type = pReq->Header.PageType;
+
+ /*
+ * ignore invalid page messages for GET_NEXT_HANDLE
+ */
+ form = le32_to_cpu(pReq->PageAddress);
+ if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
+ if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
+ page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
+ page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
+ if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
+ MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
+ return;
+ }
+ if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
+ if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
+ MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
+ return;
+ }
+
+ snprintf(extend_desc, EVENT_DESCR_STR_SZ,
+ "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
+ page_type, pReq->Header.PageNumber, pReq->Action, form);
+
+ switch (ioc_status) {
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
+ desc = "Config Page Invalid Action";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
+ desc = "Config Page Invalid Type";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
+ desc = "Config Page Invalid Page";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
+ desc = "Config Page Invalid Data";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
+ desc = "Config Page No Defaults";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
+ desc = "Config Page Can't Commit";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n",
+ ioc->name, ioc_status, desc, extend_desc);
+}
+
+/**
+ * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @ioc_status: U32 IOCStatus word from IOC
* @mf: Pointer to MPT request frame
*
* Refer to lsi/mpi.h.
- */
+ **/
static void
-mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
{
u32 status = ioc_status & MPI_IOCSTATUS_MASK;
char *desc = NULL;
switch (status) {
+
+/****************************************************************************/
+/* Common IOCStatus values for all replies */
+/****************************************************************************/
+
case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
desc = "Invalid Function";
break;
@@ -6322,84 +6790,180 @@ mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
desc = "Invalid State";
break;
+/****************************************************************************/
+/* Config IOCStatus values */
+/****************************************************************************/
+
case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
- /* No message for Config IOCStatus values */
+ mpt_iocstatus_info_config(ioc, status, mf);
break;
+/****************************************************************************/
+/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
+/* */
+/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
+/* */
+/****************************************************************************/
+
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
- /* No message for recovered error
- desc = "SCSI Recovered Error";
- */
+ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
+ case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
+ case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
+ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
break;
- case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
- desc = "SCSI Invalid Bus";
+/****************************************************************************/
+/* SCSI Target values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
+ desc = "Target: Priority IO";
break;
- case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
- desc = "SCSI Invalid TargetID";
+ case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
+ desc = "Target: Invalid Port";
break;
- case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
- {
- SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
- U8 cdb = pScsiReq->CDB[0];
- if (cdb != 0x12) { /* Inquiry is issued for device scanning */
- desc = "SCSI Device Not There";
- }
+ case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
+ desc = "Target Invalid IO Index:";
break;
- }
- case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
- desc = "SCSI Data Overrun";
+ case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
+ desc = "Target: Aborted";
break;
- case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
- /* This error is checked in scsi_io_done(). Skip.
- desc = "SCSI Data Underrun";
- */
+ case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
+ desc = "Target: No Conn Retryable";
break;
- case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
- desc = "SCSI I/O Data Error";
+ case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
+ desc = "Target: No Connection";
break;
- case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
- desc = "SCSI Protocol Error";
+ case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
+ desc = "Target: Transfer Count Mismatch";
break;
- case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
- desc = "SCSI Task Terminated";
+ case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
+ desc = "Target: STS Data not Sent";
break;
- case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
- desc = "SCSI Residual Mismatch";
+ case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
+ desc = "Target: Data Offset Error";
break;
- case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
- desc = "SCSI Task Management Failed";
+ case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
+ desc = "Target: Too Much Write Data";
break;
- case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
- desc = "SCSI IOC Terminated";
+ case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
+ desc = "Target: IU Too Short";
break;
- case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
- desc = "SCSI Ext Terminated";
+ case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
+ desc = "Target: ACK NAK Timeout";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
+ desc = "Target: Nak Received";
+ break;
+
+/****************************************************************************/
+/* Fibre Channel Direct Access values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
+ desc = "FC: Aborted";
+ break;
+
+ case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
+ desc = "FC: RX ID Invalid";
+ break;
+
+ case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
+ desc = "FC: DID Invalid";
+ break;
+
+ case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
+ desc = "FC: Node Logged Out";
+ break;
+
+ case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
+ desc = "FC: Exchange Canceled";
+ break;
+
+/****************************************************************************/
+/* LAN values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
+ desc = "LAN: Device not Found";
+ break;
+
+ case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
+ desc = "LAN: Device Failure";
+ break;
+
+ case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
+ desc = "LAN: Transmit Error";
+ break;
+
+ case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
+ desc = "LAN: Transmit Aborted";
+ break;
+
+ case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
+ desc = "LAN: Receive Error";
+ break;
+
+ case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
+ desc = "LAN: Receive Aborted";
+ break;
+
+ case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
+ desc = "LAN: Partial Packet";
+ break;
+
+ case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
+ desc = "LAN: Canceled";
+ break;
+
+/****************************************************************************/
+/* Serial Attached SCSI values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
+ desc = "SAS: SMP Request Failed";
+ break;
+
+ case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
+ desc = "SAS: SMP Data Overrun";
break;
default:
desc = "Others";
break;
}
- if (desc != NULL)
- printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc);
+
+ if (!desc)
+ return;
+
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s\n", ioc->name, status, desc);
}
+#endif
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
EXPORT_SYMBOL(mpt_attach);
@@ -6434,6 +6998,7 @@ EXPORT_SYMBOL(mpt_findImVolumes);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
+EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index e316708f76b..e3a39272aad 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -6,7 +6,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -75,8 +75,8 @@
#define COPYRIGHT "Copyright (c) 1999-2007 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.03"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.03"
+#define MPT_LINUX_VERSION_COMMON "3.04.04"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.04"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -172,6 +172,9 @@
#define MPT_SCSI_SG_DEPTH 40
#endif
+/* debug print string length used for events and iocstatus */
+# define EVENT_DESCR_STR_SZ 100
+
#ifdef __KERNEL__ /* { */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -334,8 +337,8 @@ typedef struct _VirtTarget {
struct scsi_target *starget;
u8 tflags;
u8 ioc_id;
- u8 target_id;
- u8 bus_id;
+ u8 id;
+ u8 channel;
u8 minSyncFactor; /* 0xFF is async */
u8 maxOffset; /* 0 if async */
u8 maxWidth; /* 0 if narrow, 1 if wide */
@@ -344,13 +347,12 @@ typedef struct _VirtTarget {
u8 type; /* byte 0 of Inquiry data */
u8 deleted; /* target in process of being removed */
u32 num_luns;
- u32 luns[8]; /* Max LUNs is 256 */
} VirtTarget;
typedef struct _VirtDevice {
VirtTarget *vtarget;
u8 configured_lun;
- u32 lun;
+ int lun;
} VirtDevice;
/*
@@ -412,7 +414,7 @@ typedef struct _MPT_IOCTL {
u8 rsvd;
u8 status; /* current command status */
u8 reset; /* 1 if bus reset allowed */
- u8 target; /* target for reset */
+ u8 id; /* target for reset */
struct mutex ioctl_mutex;
} MPT_IOCTL;
@@ -483,10 +485,24 @@ typedef struct _SasCfgData {
*/
}SasCfgData;
+/*
+ * Inactive volume link list of raid component data
+ * @inactive_list
+ */
+struct inactive_raid_component_info {
+ struct list_head list;
+ u8 volumeID; /* volume target id */
+ u8 volumeBus; /* volume channel */
+ IOC_3_PHYS_DISK d; /* phys disk info */
+};
+
typedef struct _RaidCfgData {
IOCPage2_t *pIocPg2; /* table of Raid Volumes */
IOCPage3_t *pIocPg3; /* table of physical disks */
- int isRaid; /* bit field, 1 if RAID */
+ struct semaphore inactive_list_mutex;
+ struct list_head inactive_list; /* link list for physical
+ disk that belong in
+ inactive volumes */
}RaidCfgData;
typedef struct _FcCfgData {
@@ -528,6 +544,8 @@ typedef struct _MPT_ADAPTER
u32 mem_phys; /* == f4020000 (mmap) */
u32 pio_mem_phys; /* Programmed IO (downloadboot) */
int mem_size; /* mmap memory size */
+ int number_of_buses;
+ int devices_per_bus;
int alloc_total;
u32 last_state;
int active;
@@ -607,6 +625,8 @@ typedef struct _MPT_ADAPTER
u8 persist_reply_frame[MPT_DEFAULT_FRAME_SIZE]; /* persist reply */
LANPage0_t lan_cnfg_page0;
LANPage1_t lan_cnfg_page1;
+
+ u8 ir_firmware; /* =1 if IR firmware detected */
/*
* Description: errata_flag_1064
* If a PCIX read occurs within 1 or 2 cycles after the chip receives
@@ -790,12 +810,6 @@ typedef struct _mpt_sge {
#define ddvprintk(x)
#endif
-#ifdef MPT_DEBUG_NEGO
-#define dnegoprintk(x) printk x
-#else
-#define dnegoprintk(x)
-#endif
-
#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY)
#define ddvtprintk(x) printk x
#else
@@ -957,7 +971,6 @@ typedef struct _MPT_SCSI_HOST {
int port;
u32 pad0;
struct scsi_cmnd **ScsiLookup;
- VirtTarget **Targets;
MPT_LOCAL_REPLY *pLocal; /* used for internal commands */
struct timer_list timer;
/* Pool of memory for holding SCpnts before doing
@@ -981,6 +994,7 @@ typedef struct _MPT_SCSI_HOST {
int scandv_wait_done;
long last_queue_full;
u16 tm_iocstatus;
+ struct list_head target_reset_list;
} MPT_SCSI_HOST;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1046,6 +1060,7 @@ extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
+extern int mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
/*
* Public data decl's...
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 504632da434..b0b80428d11 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -5,7 +5,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -313,7 +313,7 @@ static void mptctl_timeout_expired (MPT_IOCTL *ioctl)
*/
dctlprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
ioctl->ioc->name));
- mpt_HardResetHandler(ioctl->ioc, NO_SLEEP);
+ mpt_HardResetHandler(ioctl->ioc, CAN_SLEEP);
}
return;
@@ -361,7 +361,7 @@ static int mptctl_bus_reset(MPT_IOCTL *ioctl)
ioctl->ioc->name, mf));
pScsiTm = (SCSITaskMgmt_t *) mf;
- pScsiTm->TargetID = ioctl->target;
+ pScsiTm->TargetID = ioctl->id;
pScsiTm->Bus = hd->port; /* 0 */
pScsiTm->ChainOffset = 0;
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
@@ -1159,15 +1159,12 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
struct mpt_ioctl_iocinfo *karg;
MPT_ADAPTER *ioc;
struct pci_dev *pdev;
- struct Scsi_Host *sh;
- MPT_SCSI_HOST *hd;
int iocnum;
- int numDevices = 0;
- unsigned int max_id;
- int ii;
unsigned int port;
int cim_rev;
u8 revision;
+ struct scsi_device *sdev;
+ VirtDevice *vdev;
dctlprintk((": mptctl_getiocinfo called.\n"));
/* Add of PCI INFO results in unaligned access for
@@ -1257,23 +1254,16 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
/* Get number of devices
*/
- if ((sh = ioc->sh) != NULL) {
- /* sh->max_id = maximum target ID + 1
- */
- max_id = sh->max_id - 1;
- hd = (MPT_SCSI_HOST *) sh->hostdata;
-
- /* Check all of the target structures and
- * keep a counter.
- */
- if (hd && hd->Targets) {
- for (ii = 0; ii <= max_id; ii++) {
- if (hd->Targets[ii])
- numDevices++;
- }
+ karg->numDevices = 0;
+ if (ioc->sh) {
+ shost_for_each_device(sdev, ioc->sh) {
+ vdev = sdev->hostdata;
+ if (vdev->vtarget->tflags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT)
+ continue;
+ karg->numDevices++;
}
}
- karg->numDevices = numDevices;
/* Set the BIOS and FW Version
*/
@@ -1319,21 +1309,16 @@ mptctl_gettargetinfo (unsigned long arg)
struct mpt_ioctl_targetinfo __user *uarg = (void __user *) arg;
struct mpt_ioctl_targetinfo karg;
MPT_ADAPTER *ioc;
- struct Scsi_Host *sh;
- MPT_SCSI_HOST *hd;
- VirtTarget *vdev;
+ VirtDevice *vdev;
char *pmem;
int *pdata;
- IOCPage2_t *pIoc2;
- IOCPage3_t *pIoc3;
int iocnum;
int numDevices = 0;
- unsigned int max_id;
- int id, jj, indexed_lun, lun_index;
- u32 lun;
+ int lun;
int maxWordsLeft;
int numBytes;
- u8 port, devType, bus_id;
+ u8 port;
+ struct scsi_device *sdev;
dctlprintk(("mptctl_gettargetinfo called.\n"));
if (copy_from_user(&karg, uarg, sizeof(struct mpt_ioctl_targetinfo))) {
@@ -1389,74 +1374,22 @@ mptctl_gettargetinfo (unsigned long arg)
/* Get number of devices
*/
- if ((sh = ioc->sh) != NULL) {
-
- max_id = sh->max_id - 1;
- hd = (MPT_SCSI_HOST *) sh->hostdata;
-
- /* Check all of the target structures.
- * Save the Id and increment the counter,
- * if ptr non-null.
- * sh->max_id = maximum target ID + 1
- */
- if (hd && hd->Targets) {
- mpt_findImVolumes(ioc);
- pIoc2 = ioc->raid_data.pIocPg2;
- for ( id = 0; id <= max_id; ) {
- if ( pIoc2 && pIoc2->NumActiveVolumes ) {
- if ( id == pIoc2->RaidVolume[0].VolumeID ) {
- if (maxWordsLeft <= 0) {
- printk(KERN_ERR "mptctl_gettargetinfo - "
- "buffer is full but volume is available on ioc %d\n, numDevices=%d", iocnum, numDevices);
- goto data_space_full;
- }
- if ( ( pIoc2->RaidVolume[0].Flags & MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE ) == 0 )
- devType = 0x80;
- else
- devType = 0xC0;
- bus_id = pIoc2->RaidVolume[0].VolumeBus;
- numDevices++;
- *pdata = ( (devType << 24) | (bus_id << 8) | id );
- dctlprintk((KERN_ERR "mptctl_gettargetinfo - "
- "volume ioc=%d target=%x numDevices=%d pdata=%p\n", iocnum, *pdata, numDevices, pdata));
- pdata++;
- --maxWordsLeft;
- goto next_id;
- } else {
- pIoc3 = ioc->raid_data.pIocPg3;
- for ( jj = 0; jj < pIoc3->NumPhysDisks; jj++ ) {
- if ( pIoc3->PhysDisk[jj].PhysDiskID == id )
- goto next_id;
- }
- }
- }
- if ( (vdev = hd->Targets[id]) ) {
- for (jj = 0; jj <= MPT_LAST_LUN; jj++) {
- lun_index = (jj >> 5);
- indexed_lun = (jj % 32);
- lun = (1 << indexed_lun);
- if (vdev->luns[lun_index] & lun) {
- if (maxWordsLeft <= 0) {
- printk(KERN_ERR "mptctl_gettargetinfo - "
- "buffer is full but more targets are available on ioc %d numDevices=%d\n", iocnum, numDevices);
- goto data_space_full;
- }
- bus_id = vdev->bus_id;
- numDevices++;
- *pdata = ( (jj << 16) | (bus_id << 8) | id );
- dctlprintk((KERN_ERR "mptctl_gettargetinfo - "
- "target ioc=%d target=%x numDevices=%d pdata=%p\n", iocnum, *pdata, numDevices, pdata));
- pdata++;
- --maxWordsLeft;
- }
- }
- }
-next_id:
- id++;
- }
+ if (ioc->sh){
+ shost_for_each_device(sdev, ioc->sh) {
+ if (!maxWordsLeft)
+ continue;
+ vdev = sdev->hostdata;
+ if (vdev->vtarget->tflags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT)
+ continue;
+ lun = (vdev->vtarget->raidVolume) ? 0x80 : vdev->lun;
+ *pdata = (((u8)lun << 16) + (vdev->vtarget->channel << 8) +
+ (vdev->vtarget->id ));
+ pdata++;
+ numDevices++;
+ --maxWordsLeft;
}
}
-data_space_full:
karg.numDevices = numDevices;
/* Copy part of the data from kernel memory to user memory
@@ -1821,6 +1754,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
int msgContext;
u16 req_idx;
ulong timeout;
+ struct scsi_device *sdev;
dctlprintk(("mptctl_do_mpt_command called.\n"));
bufIn.kptr = bufOut.kptr = NULL;
@@ -1902,14 +1836,13 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
case MPI_FUNCTION_SCSI_IO_REQUEST:
if (ioc->sh) {
SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
- VirtTarget *pTarget = NULL;
- MPT_SCSI_HOST *hd = NULL;
int qtag = MPI_SCSIIO_CONTROL_UNTAGGED;
int scsidir = 0;
- int target = (int) pScsiReq->TargetID;
int dataSize;
+ u32 id;
- if ((target < 0) || (target >= ioc->sh->max_id)) {
+ id = (ioc->devices_per_bus == 0) ? 256 : ioc->devices_per_bus;
+ if (pScsiReq->TargetID > id) {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"Target ID out of bounds. \n",
__FILE__, __LINE__);
@@ -1917,6 +1850,14 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
goto done_free_mem;
}
+ if (pScsiReq->Bus >= ioc->number_of_buses) {
+ printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
+ "Target Bus out of bounds. \n",
+ __FILE__, __LINE__);
+ rc = -ENODEV;
+ goto done_free_mem;
+ }
+
pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
pScsiReq->MsgFlags |= mpt_msg_flags();
@@ -1936,13 +1877,15 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
cpu_to_le32(ioc->sense_buf_low_dma
+ (req_idx * MPT_SENSE_BUFFER_ALLOC));
- if ((hd = (MPT_SCSI_HOST *) ioc->sh->hostdata)) {
- if (hd->Targets)
- pTarget = hd->Targets[target];
- }
+ shost_for_each_device(sdev, ioc->sh) {
+ struct scsi_target *starget = scsi_target(sdev);
+ VirtTarget *vtarget = starget->hostdata;
- if (pTarget &&(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES))
- qtag = MPI_SCSIIO_CONTROL_SIMPLEQ;
+ if ((pScsiReq->TargetID == vtarget->id) &&
+ (pScsiReq->Bus == vtarget->channel) &&
+ (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
+ qtag = MPI_SCSIIO_CONTROL_SIMPLEQ;
+ }
/* Have the IOCTL driver set the direction based
* on the dataOutSize (ordering issue with Sparc).
@@ -1959,7 +1902,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
pScsiReq->DataLength = cpu_to_le32(dataSize);
ioc->ioctl->reset = MPTCTL_RESET_OK;
- ioc->ioctl->target = target;
+ ioc->ioctl->id = pScsiReq->TargetID;
} else {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
@@ -2038,7 +1981,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
pScsiReq->DataLength = cpu_to_le32(dataSize);
ioc->ioctl->reset = MPTCTL_RESET_OK;
- ioc->ioctl->target = pScsiReq->TargetID;
+ ioc->ioctl->id = pScsiReq->TargetID;
} else {
printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
"SCSI driver is not loaded. \n",
diff --git a/drivers/message/fusion/mptctl.h b/drivers/message/fusion/mptctl.h
index e65a1cf5eb0..f7e72c5e47d 100644
--- a/drivers/message/fusion/mptctl.h
+++ b/drivers/message/fusion/mptctl.h
@@ -6,7 +6,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index c819c23b55b..b7d4c7265ec 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -4,7 +4,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -86,6 +86,12 @@ MODULE_PARM_DESC(mptfc_dev_loss_tmo, " Initial time the driver programs the "
" return following a device loss event."
" Default=60.");
+/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
+#define MPTFC_MAX_LUN (16895)
+static int max_lun = MPTFC_MAX_LUN;
+module_param(max_lun, int, 0);
+MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+
static int mptfcDoneCtx = -1;
static int mptfcTaskCtx = -1;
static int mptfcInternalCtx = -1; /* Used only for internal commands */
@@ -292,10 +298,9 @@ mptfc_GetFcDevPage0(MPT_ADAPTER *ioc, int ioc_port,
U32 port_id = 0xffffff;
int num_targ = 0;
int max_bus = ioc->facts.MaxBuses;
- int max_targ = ioc->facts.MaxDevices;
+ int max_targ;
- if (max_bus == 0 || max_targ == 0)
- goto out;
+ max_targ = (ioc->facts.MaxDevices == 0) ? 256 : ioc->facts.MaxDevices;
data_sz = sizeof(FCDevicePage0_t) * max_bus * max_targ;
p_p0 = p0_array = kzalloc(data_sz, GFP_KERNEL);
@@ -467,8 +472,8 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
if (ri->starget) {
vtarget = ri->starget->hostdata;
if (vtarget) {
- vtarget->target_id = pg0->CurrentTargetID;
- vtarget->bus_id = pg0->CurrentBus;
+ vtarget->id = pg0->CurrentTargetID;
+ vtarget->channel = pg0->CurrentBus;
}
}
*((struct mptfc_rport_info **)rport->dd_data) = ri;
@@ -540,8 +545,8 @@ mptfc_target_alloc(struct scsi_target *starget)
if (rport) {
ri = *((struct mptfc_rport_info **)rport->dd_data);
if (ri) { /* better be! */
- vtarget->target_id = ri->pg0.CurrentTargetID;
- vtarget->bus_id = ri->pg0.CurrentBus;
+ vtarget->id = ri->pg0.CurrentTargetID;
+ vtarget->channel = ri->pg0.CurrentBus;
ri->starget = starget;
rc = 0;
}
@@ -592,7 +597,6 @@ mptfc_slave_alloc(struct scsi_device *sdev)
if (vtarget->num_luns == 0) {
vtarget->ioc_id = hd->ioc->id;
vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
- hd->Targets[sdev->id] = vtarget;
}
vdev->vtarget = vtarget;
@@ -630,16 +634,17 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
struct mptfc_rport_info *ri;
struct fc_rport *rport = starget_to_rport(scsi_target(SCpnt->device));
int err;
+ VirtDevice *vdev = SCpnt->device->hostdata;
- err = fc_remote_port_chkready(rport);
- if (unlikely(err)) {
- SCpnt->result = err;
+ if (!vdev || !vdev->vtarget) {
+ SCpnt->result = DID_NO_CONNECT << 16;
done(SCpnt);
return 0;
}
- if (!SCpnt->device->hostdata) { /* vdev */
- SCpnt->result = DID_NO_CONNECT << 16;
+ err = fc_remote_port_chkready(rport);
+ if (unlikely(err)) {
+ SCpnt->result = err;
done(SCpnt);
return 0;
}
@@ -1143,7 +1148,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
printk(MYIOC_s_WARN_FMT
"Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
ioc->name, ioc);
- return -ENODEV;
+ return 0;
}
sh = scsi_host_alloc(&mptfc_driver_template, sizeof(MPT_SCSI_HOST));
@@ -1173,10 +1178,9 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* set 16 byte cdb's */
sh->max_cmd_len = 16;
- sh->max_id = MPT_MAX_FC_DEVICES<256 ? MPT_MAX_FC_DEVICES : 255;
+ sh->max_id = ioc->pfacts->MaxDevices;
+ sh->max_lun = max_lun;
- sh->max_lun = MPT_LAST_LUN + 1;
- sh->max_channel = 0;
sh->this_id = ioc->pfacts[0].PortSCSIID;
/* Required entry.
@@ -1230,19 +1234,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n",
ioc->name, hd->ScsiLookup));
- /* Allocate memory for the device structures.
- * A non-Null pointer at an offset
- * indicates a device exists.
- * max_id = 1 + maximum id (hosts.h)
- */
- hd->Targets = kcalloc(sh->max_id, sizeof(void *), GFP_ATOMIC);
- if (!hd->Targets) {
- error = -ENOMEM;
- goto out_mptfc_probe;
- }
-
- dprintk((KERN_INFO " vdev @ %p\n", hd->Targets));
-
/* Clear the TM flags
*/
hd->tmPending = 0;
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index 2936204d8ad..b691292ff59 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -5,6 +5,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 2000-2007 LSI Logic Corporation
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptlan.h b/drivers/message/fusion/mptlan.h
index 70ab75e7c26..fe438bf119f 100644
--- a/drivers/message/fusion/mptlan.h
+++ b/drivers/message/fusion/mptlan.h
@@ -5,6 +5,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 2000-2007 LSI Logic Corporation
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 09e9a9d9641..84b8b485e95 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -4,7 +4,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
* Copyright (c) 2005-2007 Dell
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -83,17 +83,31 @@ MODULE_PARM_DESC(mpt_pt_clear,
" Clear persistency table: enable=1 "
"(default=MPTSCSIH_PT_CLEAR=0)");
+/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
+#define MPTSAS_MAX_LUN (16895)
+static int max_lun = MPTSAS_MAX_LUN;
+module_param(max_lun, int, 0);
+MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+
static int mptsasDoneCtx = -1;
static int mptsasTaskCtx = -1;
static int mptsasInternalCtx = -1; /* Used only for internal commands */
static int mptsasMgmtCtx = -1;
+static void mptsas_hotplug_work(struct work_struct *work);
+
+struct mptsas_target_reset_event {
+ struct list_head list;
+ EVENT_DATA_SAS_DEVICE_STATUS_CHANGE sas_event_data;
+ u8 target_reset_issued;
+};
enum mptsas_hotplug_action {
MPTSAS_ADD_DEVICE,
MPTSAS_DEL_DEVICE,
MPTSAS_ADD_RAID,
MPTSAS_DEL_RAID,
+ MPTSAS_ADD_INACTIVE_VOLUME,
MPTSAS_IGNORE_EVENT,
};
@@ -102,14 +116,15 @@ struct mptsas_hotplug_event {
MPT_ADAPTER *ioc;
enum mptsas_hotplug_action event_type;
u64 sas_address;
- u32 channel;
- u32 id;
+ u8 channel;
+ u8 id;
u32 device_info;
u16 handle;
u16 parent_handle;
u8 phy_id;
- u8 phys_disk_num;
- u8 phys_disk_num_valid;
+ u8 phys_disk_num_valid; /* hrc (hidden raid component) */
+ u8 phys_disk_num; /* hrc - unique index*/
+ u8 hidden_raid_component; /* hrc - don't expose*/
};
struct mptsas_discovery_event {
@@ -134,6 +149,7 @@ struct mptsas_devinfo {
u8 port_id; /* sas physical port this device
is assoc'd with */
u8 id; /* logical target id of this device */
+ u32 phys_disk_num; /* phys disk id, for csmi-ioctls */
u8 channel; /* logical bus number of this device */
u64 sas_address; /* WWN of this device,
SATA is assigned by HBA,expander */
@@ -153,6 +169,7 @@ struct mptsas_portinfo_details{
};
struct mptsas_phyinfo {
+ u16 handle; /* unique id to address this */
u8 phy_id; /* phy index */
u8 port_id; /* firmware port identifier */
u8 negotiated_link_rate; /* nego'd link rate for this phy */
@@ -168,7 +185,6 @@ struct mptsas_phyinfo {
struct mptsas_portinfo {
struct list_head list;
- u16 handle; /* unique id to address this */
u16 num_phys; /* number of phys */
struct mptsas_phyinfo *phy_info;
};
@@ -561,22 +577,273 @@ mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
mutex_unlock(&ioc->sas_topology_mutex);
}
+/**
+ * csmisas_find_vtarget
+ *
+ * @ioc
+ * @volume_id
+ * @volume_bus
+ *
+ **/
+static VirtTarget *
+mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ struct scsi_device *sdev;
+ VirtDevice *vdev;
+ VirtTarget *vtarget = NULL;
+
+ shost_for_each_device(sdev, ioc->sh) {
+ if ((vdev = sdev->hostdata) == NULL)
+ continue;
+ if (vdev->vtarget->id == id &&
+ vdev->vtarget->channel == channel)
+ vtarget = vdev->vtarget;
+ }
+ return vtarget;
+}
+
+/**
+ * mptsas_target_reset
+ *
+ * Issues TARGET_RESET to end device using handshaking method
+ *
+ * @ioc
+ * @channel
+ * @id
+ *
+ * Returns (1) success
+ * (0) failure
+ *
+ **/
+static int
+mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ MPT_FRAME_HDR *mf;
+ SCSITaskMgmt_t *pScsiTm;
+
+ if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
+ dfailprintk((MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
+ ioc->name,__FUNCTION__, __LINE__));
+ return 0;
+ }
+
+ /* Format the Request
+ */
+ pScsiTm = (SCSITaskMgmt_t *) mf;
+ memset (pScsiTm, 0, sizeof(SCSITaskMgmt_t));
+ pScsiTm->TargetID = id;
+ pScsiTm->Bus = channel;
+ pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
+ pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+ pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
+
+ DBG_DUMP_TM_REQUEST_FRAME(mf);
+
+ if (mpt_send_handshake_request(ioc->TaskCtx, ioc,
+ sizeof(SCSITaskMgmt_t), (u32 *)mf, NO_SLEEP)) {
+ mpt_free_msg_frame(ioc, mf);
+ dfailprintk((MYIOC_s_WARN_FMT "%s, tm handshake failed @%d!!\n",
+ ioc->name,__FUNCTION__, __LINE__));
+ return 0;
+ }
+
+ return 1;
+}
+
+/**
+ * mptsas_target_reset_queue
+ *
+ * Receive request for TARGET_RESET after recieving an firmware
+ * event NOT_RESPONDING_EVENT, then put command in link list
+ * and queue if task_queue already in use.
+ *
+ * @ioc
+ * @sas_event_data
+ *
+ **/
static void
-mptsas_target_reset(MPT_ADAPTER *ioc, VirtTarget * vtarget)
+mptsas_target_reset_queue(MPT_ADAPTER *ioc,
+ EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
{
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+ VirtTarget *vtarget = NULL;
+ struct mptsas_target_reset_event *target_reset_list;
+ u8 id, channel;
- if (mptscsih_TMHandler(hd,
- MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
- vtarget->bus_id, vtarget->target_id, 0, 0, 5) < 0) {
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- printk(MYIOC_s_WARN_FMT
- "Error processing TaskMgmt id=%d TARGET_RESET\n",
- ioc->name, vtarget->target_id);
+ id = sas_event_data->TargetID;
+ channel = sas_event_data->Bus;
+
+ if (!(vtarget = mptsas_find_vtarget(ioc, channel, id)))
+ return;
+
+ vtarget->deleted = 1; /* block IO */
+
+ target_reset_list = kzalloc(sizeof(*target_reset_list),
+ GFP_ATOMIC);
+ if (!target_reset_list) {
+ dfailprintk((MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
+ ioc->name,__FUNCTION__, __LINE__));
+ return;
+ }
+
+ memcpy(&target_reset_list->sas_event_data, sas_event_data,
+ sizeof(*sas_event_data));
+ list_add_tail(&target_reset_list->list, &hd->target_reset_list);
+
+ if (hd->resetPending)
+ return;
+
+ if (mptsas_target_reset(ioc, channel, id)) {
+ target_reset_list->target_reset_issued = 1;
+ hd->resetPending = 1;
}
}
+/**
+ * mptsas_dev_reset_complete
+ *
+ * Completion for TARGET_RESET after NOT_RESPONDING_EVENT,
+ * enable work queue to finish off removing device from upper layers.
+ * then send next TARGET_RESET in the queue.
+ *
+ * @ioc
+ *
+ **/
+static void
+mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
+{
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+ struct list_head *head = &hd->target_reset_list;
+ struct mptsas_target_reset_event *target_reset_list;
+ struct mptsas_hotplug_event *ev;
+ EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
+ u8 id, channel;
+ __le64 sas_address;
+
+ if (list_empty(head))
+ return;
+
+ target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, list);
+
+ sas_event_data = &target_reset_list->sas_event_data;
+ id = sas_event_data->TargetID;
+ channel = sas_event_data->Bus;
+ hd->resetPending = 0;
+
+ /*
+ * retry target reset
+ */
+ if (!target_reset_list->target_reset_issued) {
+ if (mptsas_target_reset(ioc, channel, id)) {
+ target_reset_list->target_reset_issued = 1;
+ hd->resetPending = 1;
+ }
+ return;
+ }
+
+ /*
+ * enable work queue to remove device from upper layers
+ */
+ list_del(&target_reset_list->list);
+
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ dfailprintk((MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
+ ioc->name,__FUNCTION__, __LINE__));
+ return;
+ }
+
+ INIT_WORK(&ev->work, mptsas_hotplug_work);
+ ev->ioc = ioc;
+ ev->handle = le16_to_cpu(sas_event_data->DevHandle);
+ ev->parent_handle =
+ le16_to_cpu(sas_event_data->ParentDevHandle);
+ ev->channel = channel;
+ ev->id =id;
+ ev->phy_id = sas_event_data->PhyNum;
+ memcpy(&sas_address, &sas_event_data->SASAddress,
+ sizeof(__le64));
+ ev->sas_address = le64_to_cpu(sas_address);
+ ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo);
+ ev->event_type = MPTSAS_DEL_DEVICE;
+ schedule_work(&ev->work);
+ kfree(target_reset_list);
+
+ /*
+ * issue target reset to next device in the queue
+ */
+
+ head = &hd->target_reset_list;
+ if (list_empty(head))
+ return;
+
+ target_reset_list = list_entry(head->next, struct mptsas_target_reset_event,
+ list);
+
+ sas_event_data = &target_reset_list->sas_event_data;
+ id = sas_event_data->TargetID;
+ channel = sas_event_data->Bus;
+
+ if (mptsas_target_reset(ioc, channel, id)) {
+ target_reset_list->target_reset_issued = 1;
+ hd->resetPending = 1;
+ }
+}
+
+/**
+ * mptsas_taskmgmt_complete
+ *
+ * @ioc
+ * @mf
+ * @mr
+ *
+ **/
+static int
+mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+{
+ mptsas_dev_reset_complete(ioc);
+ return mptscsih_taskmgmt_complete(ioc, mf, mr);
+}
+
+/**
+ * mptscsih_ioc_reset
+ *
+ * @ioc
+ * @reset_phase
+ *
+ **/
+static int
+mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+ struct mptsas_target_reset_event *target_reset_list, *n;
+ int rc;
+
+ rc = mptscsih_ioc_reset(ioc, reset_phase);
+
+ if (ioc->bus_type != SAS)
+ goto out;
+
+ if (reset_phase != MPT_IOC_POST_RESET)
+ goto out;
+
+ if (!hd || !hd->ioc)
+ goto out;
+
+ if (list_empty(&hd->target_reset_list))
+ goto out;
+
+ /* flush the target_reset_list */
+ list_for_each_entry_safe(target_reset_list, n,
+ &hd->target_reset_list, list) {
+ list_del(&target_reset_list->list);
+ kfree(target_reset_list);
+ }
+
+ out:
+ return rc;
+}
+
static int
mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
u32 form, u32 form_specific)
@@ -661,8 +928,7 @@ mptsas_target_alloc(struct scsi_target *starget)
struct Scsi_Host *host = dev_to_shost(&starget->dev);
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
VirtTarget *vtarget;
- u32 target_id;
- u32 channel;
+ u8 id, channel;
struct sas_rphy *rphy;
struct mptsas_portinfo *p;
int i;
@@ -673,15 +939,19 @@ mptsas_target_alloc(struct scsi_target *starget)
vtarget->starget = starget;
vtarget->ioc_id = hd->ioc->id;
- vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
-
- target_id = starget->id;
+ vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
+ id = starget->id;
channel = 0;
- hd->Targets[target_id] = vtarget;
-
- if (starget->channel == MPTSAS_RAID_CHANNEL)
+ /*
+ * RAID volumes placed beyond the last expected port.
+ */
+ if (starget->channel == MPTSAS_RAID_CHANNEL) {
+ for (i=0; i < hd->ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
+ if (id == hd->ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID)
+ channel = hd->ioc->raid_data.pIocPg2->RaidVolume[i].VolumeBus;
goto out;
+ }
rphy = dev_to_rphy(starget->dev.parent);
mutex_lock(&hd->ioc->sas_topology_mutex);
@@ -690,18 +960,19 @@ mptsas_target_alloc(struct scsi_target *starget)
if (p->phy_info[i].attached.sas_address !=
rphy->identify.sas_address)
continue;
- target_id = p->phy_info[i].attached.id;
+ id = p->phy_info[i].attached.id;
channel = p->phy_info[i].attached.channel;
mptsas_set_starget(&p->phy_info[i], starget);
/*
* Exposing hidden raid components
*/
- if (mptscsih_is_phys_disk(hd->ioc, target_id)) {
- target_id = mptscsih_raid_id_to_num(hd,
- target_id);
+ if (mptscsih_is_phys_disk(hd->ioc, channel, id)) {
+ id = mptscsih_raid_id_to_num(hd->ioc,
+ channel, id);
vtarget->tflags |=
MPT_TARGET_FLAGS_RAID_COMPONENT;
+ p->phy_info[i].attached.phys_disk_num = id;
}
mutex_unlock(&hd->ioc->sas_topology_mutex);
goto out;
@@ -713,8 +984,8 @@ mptsas_target_alloc(struct scsi_target *starget)
return -ENXIO;
out:
- vtarget->target_id = target_id;
- vtarget->bus_id = channel;
+ vtarget->id = id;
+ vtarget->channel = channel;
starget->hostdata = vtarget;
return 0;
}
@@ -786,7 +1057,8 @@ mptsas_slave_alloc(struct scsi_device *sdev)
* Exposing hidden raid components
*/
if (mptscsih_is_phys_disk(hd->ioc,
- p->phy_info[i].attached.id))
+ p->phy_info[i].attached.channel,
+ p->phy_info[i].attached.id))
sdev->no_uld_attach = 1;
mutex_unlock(&hd->ioc->sas_topology_mutex);
goto out;
@@ -808,13 +1080,14 @@ mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
VirtDevice *vdev = SCpnt->device->hostdata;
-// scsi_print_command(SCpnt);
- if (vdev->vtarget->deleted) {
+ if (!vdev || !vdev->vtarget || vdev->vtarget->deleted) {
SCpnt->result = DID_NO_CONNECT << 16;
done(SCpnt);
return 0;
}
+// scsi_print_command(SCpnt);
+
return mptscsih_qcmd(SCpnt,done);
}
@@ -1114,9 +1387,6 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
goto out_free_consistent;
}
- if (port_info->num_phys)
- port_info->handle =
- le16_to_cpu(buffer->PhyData[0].ControllerDevHandle);
for (i = 0; i < port_info->num_phys; i++) {
mptsas_print_phy_data(&buffer->PhyData[i]);
port_info->phy_info[i].phy_id = i;
@@ -1125,6 +1395,8 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
port_info->phy_info[i].negotiated_link_rate =
buffer->PhyData[i].NegotiatedLinkRate;
port_info->phy_info[i].portinfo = port_info;
+ port_info->phy_info[i].handle =
+ le16_to_cpu(buffer->PhyData[i].ControllerDevHandle);
}
out_free_consistent:
@@ -1261,6 +1533,7 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
device_info->phy_id = buffer->PhyNum;
device_info->port_id = buffer->PhysicalPort;
device_info->id = buffer->TargetID;
+ device_info->phys_disk_num = ~0;
device_info->channel = buffer->Bus;
memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
device_info->sas_address = le64_to_cpu(sas_address);
@@ -1325,7 +1598,6 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
/* save config data */
port_info->num_phys = buffer->NumPhys;
- port_info->handle = le16_to_cpu(buffer->DevHandle);
port_info->phy_info = kcalloc(port_info->num_phys,
sizeof(*port_info->phy_info),GFP_KERNEL);
if (!port_info->phy_info) {
@@ -1333,8 +1605,11 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
goto out_free_consistent;
}
- for (i = 0; i < port_info->num_phys; i++)
+ for (i = 0; i < port_info->num_phys; i++) {
port_info->phy_info[i].portinfo = port_info;
+ port_info->phy_info[i].handle =
+ le16_to_cpu(buffer->DevHandle);
+ }
out_free_consistent:
pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
@@ -1702,7 +1977,6 @@ static int
mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
{
struct mptsas_portinfo *port_info, *hba;
- u32 handle = 0xFFFF;
int error = -ENOMEM, i;
hba = kzalloc(sizeof(*port_info), GFP_KERNEL);
@@ -1714,34 +1988,36 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
goto out_free_port_info;
mutex_lock(&ioc->sas_topology_mutex);
- ioc->handle = hba->handle;
- port_info = mptsas_find_portinfo_by_handle(ioc, hba->handle);
+ ioc->handle = hba->phy_info[0].handle;
+ port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle);
if (!port_info) {
port_info = hba;
list_add_tail(&port_info->list, &ioc->sas_topology);
} else {
- port_info->handle = hba->handle;
- for (i = 0; i < hba->num_phys; i++)
+ for (i = 0; i < hba->num_phys; i++) {
port_info->phy_info[i].negotiated_link_rate =
hba->phy_info[i].negotiated_link_rate;
+ port_info->phy_info[i].handle =
+ hba->phy_info[i].handle;
+ port_info->phy_info[i].port_id =
+ hba->phy_info[i].port_id;
+ }
kfree(hba->phy_info);
kfree(hba);
hba = NULL;
}
mutex_unlock(&ioc->sas_topology_mutex);
-
for (i = 0; i < port_info->num_phys; i++) {
mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
(MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
- (MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
+ (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ port_info->phy_info[i].handle);
port_info->phy_info[i].identify.phy_id =
- port_info->phy_info[i].phy_id;
- handle = port_info->phy_info[i].identify.handle;
-
+ port_info->phy_info[i].phy_id = i;
if (port_info->phy_info[i].attached.handle)
mptsas_sas_device_pg0(ioc,
&port_info->phy_info[i].attached,
@@ -1777,12 +2053,12 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
goto out;
error = mptsas_sas_expander_pg0(ioc, ex,
- (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
- MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
+ (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
if (error)
goto out_free_port_info;
- *handle = ex->handle;
+ *handle = ex->phy_info[0].handle;
mutex_lock(&ioc->sas_topology_mutex);
port_info = mptsas_find_portinfo_by_handle(ioc, *handle);
@@ -1790,7 +2066,12 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
port_info = ex;
list_add_tail(&port_info->list, &ioc->sas_topology);
} else {
- port_info->handle = ex->handle;
+ for (i = 0; i < ex->num_phys; i++) {
+ port_info->phy_info[i].handle =
+ ex->phy_info[i].handle;
+ port_info->phy_info[i].port_id =
+ ex->phy_info[i].port_id;
+ }
kfree(ex->phy_info);
kfree(ex);
ex = NULL;
@@ -1868,8 +2149,6 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
struct mptsas_portinfo buffer;
struct mptsas_portinfo *port_info, *n, *parent;
struct mptsas_phyinfo *phy_info;
- struct scsi_target * starget;
- VirtTarget * vtarget;
struct sas_port * port;
int i;
u64 expander_sas_address;
@@ -1884,26 +2163,8 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
if (mptsas_sas_expander_pg0(ioc, &buffer,
(MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
- MPI_SAS_EXPAND_PGAD_FORM_SHIFT), port_info->handle)) {
-
- /*
- * Issue target reset to all child end devices
- * then mark them deleted to prevent further
- * IO going to them.
- */
- phy_info = port_info->phy_info;
- for (i = 0; i < port_info->num_phys; i++, phy_info++) {
- starget = mptsas_get_starget(phy_info);
- if (!starget)
- continue;
- vtarget = starget->hostdata;
- if(vtarget->deleted)
- continue;
- vtarget->deleted = 1;
- mptsas_target_reset(ioc, vtarget);
- sas_port_delete(mptsas_get_port(phy_info));
- mptsas_port_delete(phy_info->port_details);
- }
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
+ port_info->phy_info[0].handle)) {
/*
* Obtain the port_info instance to the parent port
@@ -1972,11 +2233,13 @@ mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
/*
Reporting RAID volumes.
*/
+ if (!ioc->ir_firmware)
+ goto out;
if (!ioc->raid_data.pIocPg2)
goto out;
if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
goto out;
- for (i=0; i<ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+ for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
}
@@ -2030,12 +2293,37 @@ mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(port_info, &ioc->sas_topology, list) {
for (i = 0; i < port_info->num_phys; i++) {
+ if (!mptsas_is_end_device(
+ &port_info->phy_info[i].attached))
+ continue;
if (port_info->phy_info[i].attached.sas_address
!= sas_address)
continue;
+ phy_info = &port_info->phy_info[i];
+ break;
+ }
+ }
+ mutex_unlock(&ioc->sas_topology_mutex);
+ return phy_info;
+}
+
+static struct mptsas_phyinfo *
+mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ struct mptsas_portinfo *port_info;
+ struct mptsas_phyinfo *phy_info = NULL;
+ int i;
+
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry(port_info, &ioc->sas_topology, list) {
+ for (i = 0; i < port_info->num_phys; i++) {
if (!mptsas_is_end_device(
&port_info->phy_info[i].attached))
continue;
+ if (port_info->phy_info[i].attached.id != id)
+ continue;
+ if (port_info->phy_info[i].attached.channel != channel)
+ continue;
phy_info = &port_info->phy_info[i];
break;
}
@@ -2045,7 +2333,7 @@ mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
}
static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id)
+mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
struct mptsas_portinfo *port_info;
struct mptsas_phyinfo *phy_info = NULL;
@@ -2054,11 +2342,15 @@ mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id)
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(port_info, &ioc->sas_topology, list) {
for (i = 0; i < port_info->num_phys; i++) {
- if (port_info->phy_info[i].attached.id != id)
- continue;
if (!mptsas_is_end_device(
&port_info->phy_info[i].attached))
continue;
+ if (port_info->phy_info[i].attached.phys_disk_num == ~0)
+ continue;
+ if (port_info->phy_info[i].attached.phys_disk_num != id)
+ continue;
+ if (port_info->phy_info[i].attached.channel != channel)
+ continue;
phy_info = &port_info->phy_info[i];
break;
}
@@ -2094,6 +2386,76 @@ mptsas_reprobe_target(struct scsi_target *starget, int uld_attach)
mptsas_reprobe_lun);
}
+static void
+mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidVolumePage0_t buffer = NULL;
+ RaidPhysDiskPage0_t phys_disk;
+ int i;
+ struct mptsas_hotplug_event *ev;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
+ cfg.pageAddr = (channel << 8) + id;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!hdr.PageLength)
+ goto out;
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer)
+ goto out;
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!(buffer->VolumeStatus.Flags &
+ MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE))
+ goto out;
+
+ if (!buffer->NumPhysDisks)
+ goto out;
+
+ for (i = 0; i < buffer->NumPhysDisks; i++) {
+
+ if (mpt_raid_phys_disk_pg0(ioc,
+ buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
+ continue;
+
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ printk(KERN_WARNING "mptsas: lost hotplug event\n");
+ goto out;
+ }
+
+ INIT_WORK(&ev->work, mptsas_hotplug_work);
+ ev->ioc = ioc;
+ ev->id = phys_disk.PhysDiskID;
+ ev->channel = phys_disk.PhysDiskBus;
+ ev->phys_disk_num_valid = 1;
+ ev->phys_disk_num = phys_disk.PhysDiskNum;
+ ev->event_type = MPTSAS_ADD_DEVICE;
+ schedule_work(&ev->work);
+ }
+
+ out:
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+}
/*
* Work queue thread to handle SAS hotplug events
*/
@@ -2102,6 +2464,7 @@ mptsas_hotplug_work(struct work_struct *work)
{
struct mptsas_hotplug_event *ev =
container_of(work, struct mptsas_hotplug_event, work);
+
MPT_ADAPTER *ioc = ev->ioc;
struct mptsas_phyinfo *phy_info;
struct sas_rphy *rphy;
@@ -2114,17 +2477,43 @@ mptsas_hotplug_work(struct work_struct *work)
VirtTarget *vtarget;
VirtDevice *vdevice;
-
mutex_lock(&ioc->sas_discovery_mutex);
switch (ev->event_type) {
case MPTSAS_DEL_DEVICE:
- phy_info = mptsas_find_phyinfo_by_target(ioc, ev->id);
+ phy_info = NULL;
+ if (ev->phys_disk_num_valid) {
+ if (ev->hidden_raid_component){
+ if (mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ (ev->channel << 8) + ev->id)) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
+ break;
+ }
+ phy_info = mptsas_find_phyinfo_by_sas_address(
+ ioc, sas_device.sas_address);
+ }else
+ phy_info = mptsas_find_phyinfo_by_phys_disk_num(
+ ioc, ev->channel, ev->phys_disk_num);
+ }
+
+ if (!phy_info)
+ phy_info = mptsas_find_phyinfo_by_target(ioc,
+ ev->channel, ev->id);
/*
* Sanity checks, for non-existing phys and remote rphys.
*/
- if (!phy_info || !phy_info->port_details) {
+ if (!phy_info){
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
+ break;
+ }
+ if (!phy_info->port_details) {
dfailprintk((MYIOC_s_ERR_FMT
"%s: exit at line=%d\n", ioc->name,
__FUNCTION__, __LINE__));
@@ -2137,6 +2526,7 @@ mptsas_hotplug_work(struct work_struct *work)
__FUNCTION__, __LINE__));
break;
}
+
port = mptsas_get_port(phy_info);
if (!port) {
dfailprintk((MYIOC_s_ERR_FMT
@@ -2159,28 +2549,35 @@ mptsas_hotplug_work(struct work_struct *work)
/*
* Handling RAID components
*/
- if (ev->phys_disk_num_valid) {
- vtarget->target_id = ev->phys_disk_num;
- vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+ if (ev->phys_disk_num_valid &&
+ ev->hidden_raid_component) {
+ printk(MYIOC_s_INFO_FMT
+ "RAID Hidding: channel=%d, id=%d, "
+ "physdsk %d \n", ioc->name, ev->channel,
+ ev->id, ev->phys_disk_num);
+ vtarget->id = ev->phys_disk_num;
+ vtarget->tflags |=
+ MPT_TARGET_FLAGS_RAID_COMPONENT;
mptsas_reprobe_target(starget, 1);
- break;
+ phy_info->attached.phys_disk_num =
+ ev->phys_disk_num;
+ break;
}
-
- vtarget->deleted = 1;
- mptsas_target_reset(ioc, vtarget);
}
- if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_SSP_TARGET)
ds = "ssp";
- if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_STP_TARGET)
ds = "stp";
- if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)
ds = "sata";
printk(MYIOC_s_INFO_FMT
"removing %s device, channel %d, id %d, phy %d\n",
ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
-
#ifdef MPT_DEBUG_SAS_WIDE
dev_printk(KERN_DEBUG, &port->dev,
"delete port (%d)\n", port->port_identifier);
@@ -2198,14 +2595,14 @@ mptsas_hotplug_work(struct work_struct *work)
*/
if (mptsas_sas_device_pg0(ioc, &sas_device,
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id)) {
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ (ev->channel << 8) + ev->id)) {
dfailprintk((MYIOC_s_ERR_FMT
"%s: exit at line=%d\n", ioc->name,
__FUNCTION__, __LINE__));
break;
}
- ssleep(2);
__mptsas_discovery_work(ioc);
phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
@@ -2219,7 +2616,8 @@ mptsas_hotplug_work(struct work_struct *work)
}
starget = mptsas_get_starget(phy_info);
- if (starget) {
+ if (starget && (!ev->hidden_raid_component)){
+
vtarget = starget->hostdata;
if (!vtarget) {
@@ -2232,9 +2630,15 @@ mptsas_hotplug_work(struct work_struct *work)
* Handling RAID components
*/
if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
- vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
- vtarget->target_id = ev->id;
+ printk(MYIOC_s_INFO_FMT
+ "RAID Exposing: channel=%d, id=%d, "
+ "physdsk %d \n", ioc->name, ev->channel,
+ ev->id, ev->phys_disk_num);
+ vtarget->tflags &=
+ ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+ vtarget->id = ev->id;
mptsas_reprobe_target(starget, 0);
+ phy_info->attached.phys_disk_num = ~0;
}
break;
}
@@ -2243,8 +2647,10 @@ mptsas_hotplug_work(struct work_struct *work)
dfailprintk((MYIOC_s_ERR_FMT
"%s: exit at line=%d\n", ioc->name,
__FUNCTION__, __LINE__));
+ if (ev->channel) printk("%d\n", __LINE__);
break;
}
+
port = mptsas_get_port(phy_info);
if (!port) {
dfailprintk((MYIOC_s_ERR_FMT
@@ -2252,15 +2658,17 @@ mptsas_hotplug_work(struct work_struct *work)
__FUNCTION__, __LINE__));
break;
}
-
memcpy(&phy_info->attached, &sas_device,
sizeof(struct mptsas_devinfo));
- if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_SSP_TARGET)
ds = "ssp";
- if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_STP_TARGET)
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_STP_TARGET)
ds = "stp";
- if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)
ds = "sata";
printk(MYIOC_s_INFO_FMT
@@ -2301,19 +2709,21 @@ mptsas_hotplug_work(struct work_struct *work)
break;
case MPTSAS_DEL_RAID:
sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
- ev->id, 0);
+ ev->id, 0);
if (!sdev)
break;
printk(MYIOC_s_INFO_FMT
"removing raid volume, channel %d, id %d\n",
ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
vdevice = sdev->hostdata;
- vdevice->vtarget->deleted = 1;
- mptsas_target_reset(ioc, vdevice->vtarget);
scsi_remove_device(sdev);
scsi_device_put(sdev);
mpt_findImVolumes(ioc);
break;
+ case MPTSAS_ADD_INACTIVE_VOLUME:
+ mptsas_adding_inactive_raid_components(ioc,
+ ev->channel, ev->id);
+ break;
case MPTSAS_IGNORE_EVENT:
default:
break;
@@ -2321,7 +2731,6 @@ mptsas_hotplug_work(struct work_struct *work)
mutex_unlock(&ioc->sas_discovery_mutex);
kfree(ev);
-
}
static void
@@ -2339,8 +2748,12 @@ mptsas_send_sas_event(MPT_ADAPTER *ioc,
return;
switch (sas_event_data->ReasonCode) {
- case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
+
+ mptsas_target_reset_queue(ioc, sas_event_data);
+ break;
+
+ case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
printk(KERN_WARNING "mptsas: lost hotplug event\n");
@@ -2375,15 +2788,20 @@ mptsas_send_sas_event(MPT_ADAPTER *ioc,
mptsas_persist_clear_table);
schedule_work(&ioc->sas_persist_task);
break;
+ /*
+ * TODO, handle other events
+ */
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
- /* TODO */
+ case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
- /* TODO */
+ case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
+ case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+ case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+ case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
default:
break;
}
}
-
static void
mptsas_send_raid_event(MPT_ADAPTER *ioc,
EVENT_DATA_RAID *raid_event_data)
@@ -2404,31 +2822,36 @@ mptsas_send_raid_event(MPT_ADAPTER *ioc,
INIT_WORK(&ev->work, mptsas_hotplug_work);
ev->ioc = ioc;
ev->id = raid_event_data->VolumeID;
+ ev->channel = raid_event_data->VolumeBus;
ev->event_type = MPTSAS_IGNORE_EVENT;
switch (raid_event_data->ReasonCode) {
case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
+ ev->phys_disk_num_valid = 1;
+ ev->phys_disk_num = raid_event_data->PhysDiskNum;
ev->event_type = MPTSAS_ADD_DEVICE;
break;
case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
- ioc->raid_data.isRaid = 1;
ev->phys_disk_num_valid = 1;
ev->phys_disk_num = raid_event_data->PhysDiskNum;
+ ev->hidden_raid_component = 1;
ev->event_type = MPTSAS_DEL_DEVICE;
break;
case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
switch (state) {
case MPI_PD_STATE_ONLINE:
- ioc->raid_data.isRaid = 1;
+ case MPI_PD_STATE_NOT_COMPATIBLE:
ev->phys_disk_num_valid = 1;
ev->phys_disk_num = raid_event_data->PhysDiskNum;
+ ev->hidden_raid_component = 1;
ev->event_type = MPTSAS_ADD_DEVICE;
break;
case MPI_PD_STATE_MISSING:
- case MPI_PD_STATE_NOT_COMPATIBLE:
case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
+ ev->phys_disk_num_valid = 1;
+ ev->phys_disk_num = raid_event_data->PhysDiskNum;
ev->event_type = MPTSAS_DEL_DEVICE;
break;
default:
@@ -2485,6 +2908,35 @@ mptsas_send_discovery_event(MPT_ADAPTER *ioc,
schedule_work(&ev->work);
};
+/*
+ * mptsas_send_ir2_event - handle exposing hidden disk when
+ * an inactive raid volume is added
+ *
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @ir2_data
+ *
+ */
+static void
+mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data)
+{
+ struct mptsas_hotplug_event *ev;
+
+ if (ir2_data->ReasonCode !=
+ MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED)
+ return;
+
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev)
+ return;
+
+ INIT_WORK(&ev->work, mptsas_hotplug_work);
+ ev->ioc = ioc;
+ ev->id = ir2_data->TargetID;
+ ev->channel = ir2_data->Bus;
+ ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME;
+
+ schedule_work(&ev->work);
+};
static int
mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
@@ -2524,6 +2976,10 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
mptsas_send_discovery_event(ioc,
(EVENT_DATA_SAS_DISCOVERY *)reply->Data);
break;
+ case MPI_EVENT_IR2:
+ mptsas_send_ir2_event(ioc,
+ (PTR_MPI_EVENT_DATA_IR2)reply->Data);
+ break;
default:
rc = mptscsih_event_process(ioc, reply);
break;
@@ -2611,12 +3067,11 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* set 16 byte cdb's */
sh->max_cmd_len = 16;
- sh->max_id = ioc->pfacts->MaxDevices + 1;
+ sh->max_id = ioc->pfacts[0].PortSCSIID;
+ sh->max_lun = max_lun;
sh->transportt = mptsas_transport_template;
- sh->max_lun = MPT_LAST_LUN + 1;
- sh->max_channel = 0;
sh->this_id = ioc->pfacts[0].PortSCSIID;
/* Required entry.
@@ -2659,8 +3114,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
sh->sg_tablesize = numSGE;
}
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
hd = (MPT_SCSI_HOST *) sh->hostdata;
hd->ioc = ioc;
@@ -2676,19 +3129,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n",
ioc->name, hd->ScsiLookup));
- /* Allocate memory for the device structures.
- * A non-Null pointer at an offset
- * indicates a device exists.
- * max_id = 1 + maximum id (hosts.h)
- */
- hd->Targets = kcalloc(sh->max_id, sizeof(void *), GFP_ATOMIC);
- if (!hd->Targets) {
- error = -ENOMEM;
- goto out_mptsas_probe;
- }
-
- dprintk((KERN_INFO " vtarget @ %p\n", hd->Targets));
-
/* Clear the TM flags
*/
hd->tmPending = 0;
@@ -2713,15 +3153,17 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->sas_data.ptClear = mpt_pt_clear;
+ init_waitqueue_head(&hd->scandv_waitq);
+ hd->scandv_wait_done = 0;
+ hd->last_queue_full = 0;
+ INIT_LIST_HEAD(&hd->target_reset_list);
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+
if (ioc->sas_data.ptClear==1) {
mptbase_sas_persist_operation(
ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT);
}
- init_waitqueue_head(&hd->scandv_waitq);
- hd->scandv_wait_done = 0;
- hd->last_queue_full = 0;
-
error = scsi_add_host(sh, &ioc->pcidev->dev);
if (error) {
dprintk((KERN_ERR MYNAM
@@ -2745,7 +3187,7 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
struct mptsas_portinfo *p, *n;
int i;
- ioc->sas_discovery_ignore_events=1;
+ ioc->sas_discovery_ignore_events = 1;
sas_remove_host(ioc->sh);
mutex_lock(&ioc->sas_topology_mutex);
@@ -2800,7 +3242,7 @@ mptsas_init(void)
return -ENODEV;
mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
- mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER);
+ mptsasTaskCtx = mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
mptsasInternalCtx =
mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
@@ -2810,7 +3252,7 @@ mptsas_init(void)
": Registered for IOC event notifications\n"));
}
- if (mpt_reset_register(mptsasDoneCtx, mptscsih_ioc_reset) == 0) {
+ if (mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset) == 0) {
dprintk((KERN_INFO MYNAM
": Registered for IOC reset notifications\n"));
}
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index f0cca3ea93b..c417ae0b5fe 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -4,7 +4,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -79,43 +79,6 @@ MODULE_LICENSE("GPL");
MODULE_VERSION(my_VERSION);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-typedef struct _BIG_SENSE_BUF {
- u8 data[MPT_SENSE_BUFFER_ALLOC];
-} BIG_SENSE_BUF;
-
-#define MPT_SCANDV_GOOD (0x00000000) /* must be 0 */
-#define MPT_SCANDV_DID_RESET (0x00000001)
-#define MPT_SCANDV_SENSE (0x00000002)
-#define MPT_SCANDV_SOME_ERROR (0x00000004)
-#define MPT_SCANDV_SELECTION_TIMEOUT (0x00000008)
-#define MPT_SCANDV_ISSUE_SENSE (0x00000010)
-#define MPT_SCANDV_FALLBACK (0x00000020)
-
-#define MPT_SCANDV_MAX_RETRIES (10)
-
-#define MPT_ICFLAG_BUF_CAP 0x01 /* ReadBuffer Read Capacity format */
-#define MPT_ICFLAG_ECHO 0x02 /* ReadBuffer Echo buffer format */
-#define MPT_ICFLAG_EBOS 0x04 /* ReadBuffer Echo buffer has EBOS */
-#define MPT_ICFLAG_PHYS_DISK 0x08 /* Any SCSI IO but do Phys Disk Format */
-#define MPT_ICFLAG_TAGGED_CMD 0x10 /* Do tagged IO */
-#define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occurred with this command */
-#define MPT_ICFLAG_RESERVED 0x40 /* Reserved has been issued */
-
-typedef struct _internal_cmd {
- char *data; /* data pointer */
- dma_addr_t data_dma; /* data dma address */
- int size; /* transfer size */
- u8 cmd; /* SCSI Op Code */
- u8 bus; /* bus number */
- u8 id; /* SCSI ID (virtual) */
- u8 lun;
- u8 flags; /* Bit Field - See above */
- u8 physDiskNum; /* Phys disk number, -1 else */
- u8 rsvd2;
- u8 rsvd;
-} INTERNAL_CMD;
-
/*
* Other private/forward protos...
*/
@@ -131,14 +94,11 @@ static int mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
static int SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc);
-static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
+static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
-static void mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, struct scsi_device *sdev);
-static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *vtarget, struct scsi_device *sdev);
-static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus);
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
@@ -517,16 +477,100 @@ mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
SEPMsg = (SEPRequest_t *)mf;
SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
- SEPMsg->Bus = vtarget->bus_id;
- SEPMsg->TargetID = vtarget->target_id;
+ SEPMsg->Bus = vtarget->channel;
+ SEPMsg->TargetID = vtarget->id;
SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
SEPMsg->SlotStatus = SlotStatus;
devtverboseprintk((MYIOC_s_WARN_FMT
- "Sending SEP cmd=%x id=%d bus=%d\n",
- ioc->name, SlotStatus, SEPMsg->TargetID, SEPMsg->Bus));
+ "Sending SEP cmd=%x channel=%d id=%d\n",
+ ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
}
+#ifdef MPT_DEBUG_REPLY
+/**
+ * mptscsih_iocstatus_info_scsiio - IOCSTATUS information for SCSIIO
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @ioc_status: U32 IOCStatus word from IOC
+ * @scsi_status: U8 sam status from target
+ * @scsi_state: U8 scsi state
+ * @sc: original scsi cmnd pointer
+ * @mf: Pointer to MPT request frame
+ *
+ * Refer to lsi/mpi.h.
+ **/
+static void
+mptscsih_iocstatus_info_scsiio(MPT_ADAPTER *ioc, u32 ioc_status,
+ u8 scsi_status, u8 scsi_state, struct scsi_cmnd *sc)
+{
+ char extend_desc[EVENT_DESCR_STR_SZ];
+ char *desc = NULL;
+
+ switch (ioc_status) {
+
+ case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
+ desc = "SCSI Invalid Bus";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
+ desc = "SCSI Invalid TargetID";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ /*
+ * Inquiry is issued for device scanning
+ */
+ if (sc->cmnd[0] != 0x12)
+ desc = "SCSI Device Not There";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ desc = "SCSI Data Overrun";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ desc = "SCSI I/O Data Error";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ desc = "SCSI Protocol Error";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ desc = "SCSI Task Terminated";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
+ desc = "SCSI Residual Mismatch";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
+ desc = "SCSI Task Management Failed";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ desc = "SCSI IOC Terminated";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ desc = "SCSI Ext Terminated";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ snprintf(extend_desc, EVENT_DESCR_STR_SZ,
+ "[%d:%d:%d:%d] cmd=%02Xh, sam_status=%02Xh state=%02Xh",
+ sc->device->host->host_no,
+ sc->device->channel, sc->device->id, sc->device->lun,
+ sc->cmnd[0], scsi_status, scsi_state);
+
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n",
+ ioc->name, ioc_status, desc, extend_desc);
+}
+#endif
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptscsih_io_done - Main SCSI IO callback routine registered to
@@ -613,12 +657,14 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
u32 xfer_cnt;
u16 status;
u8 scsi_state, scsi_status;
+ u32 log_info;
status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
scsi_state = pScsiReply->SCSIState;
scsi_status = pScsiReply->SCSIStatus;
xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
sc->resid = sc->request_bufflen - xfer_cnt;
+ log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
/*
* if we get a data underrun indication, yet no data was
@@ -633,13 +679,6 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
status = MPI_IOCSTATUS_SUCCESS;
}
- dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n"
- "IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n"
- "resid=%d bufflen=%d xfer_cnt=%d\n",
- ioc->id, sc->device->id, sc->device->lun,
- status, scsi_state, scsi_status, sc->resid,
- sc->request_bufflen, xfer_cnt));
-
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
@@ -648,9 +687,10 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
*/
if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
pScsiReply->ResponseInfo) {
- printk(KERN_NOTICE "ha=%d id=%d lun=%d: "
+ printk(KERN_NOTICE "[%d:%d:%d:%d] "
"FCP_ResponseInfo=%08xh\n",
- ioc->id, sc->device->id, sc->device->lun,
+ sc->device->host->host_no, sc->device->channel,
+ sc->device->id, sc->device->lun,
le32_to_cpu(pScsiReply->ResponseInfo));
}
@@ -695,9 +735,8 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
if ( ioc->bus_type == SAS ) {
u16 ioc_status = le16_to_cpu(pScsiReply->IOCStatus);
if (ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
- u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
- log_info &=SAS_LOGINFO_MASK;
- if (log_info == SAS_LOGINFO_NEXUS_LOSS) {
+ if ((log_info & SAS_LOGINFO_MASK)
+ == SAS_LOGINFO_NEXUS_LOSS) {
sc->result = (DID_BUS_BUSY << 16);
break;
}
@@ -735,7 +774,8 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
else /* Sufficient data transfer occurred */
sc->result = (DID_OK << 16) | scsi_status;
dreplyprintk((KERN_NOTICE
- "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->device->id));
+ "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
+ sc->result, sc->device->channel, sc->device->id));
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
@@ -848,7 +888,28 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
} /* switch(status) */
- dreplyprintk((KERN_NOTICE " sc->result is %08xh\n", sc->result));
+#ifdef MPT_DEBUG_REPLY
+ if (sc->result) {
+
+ mptscsih_iocstatus_info_scsiio(ioc, status,
+ scsi_status, scsi_state, sc);
+
+ dreplyprintk(("%s: [%d:%d:%d:%d] cmd=0x%02x "
+ "result=0x%08x\n\tiocstatus=0x%04X "
+ "scsi_state=0x%02X scsi_status=0x%02X "
+ "loginfo=0x%08X\n", __FUNCTION__,
+ sc->device->host->host_no, sc->device->channel, sc->device->id,
+ sc->device->lun, sc->cmnd[0], sc->result, status,
+ scsi_state, scsi_status, log_info));
+
+ dreplyprintk(("%s: [%d:%d:%d:%d] resid=%d "
+ "bufflen=%d xfer_cnt=%d\n", __FUNCTION__,
+ sc->device->host->host_no, sc->device->channel, sc->device->id,
+ sc->device->lun, sc->resid, sc->request_bufflen,
+ xfer_cnt));
+ }
+#endif
+
} /* end of address reply case */
/* Unmap the DMA buffers, if any. */
@@ -955,9 +1016,10 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
int ii;
int max = hd->ioc->req_depth;
struct scsi_cmnd *sc;
+ struct scsi_lun lun;
- dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n",
- vdevice->vtarget->target_id, vdevice->lun, max));
+ dsprintk((KERN_INFO MYNAM ": search_running channel %d id %d lun %d max %d\n",
+ vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun, max));
for (ii=0; ii < max; ii++) {
if ((sc = hd->ScsiLookup[ii]) != NULL) {
@@ -965,10 +1027,14 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii);
if (mf == NULL)
continue;
- dsprintk(( "search_running: found (sc=%p, mf = %p) target %d, lun %d \n",
- hd->ScsiLookup[ii], mf, mf->TargetID, mf->LUN[1]));
- if ((mf->TargetID != ((u8)vdevice->vtarget->target_id)) || (mf->LUN[1] != ((u8) vdevice->lun)))
+ int_to_scsilun(vdevice->lun, &lun);
+ if ((mf->Bus != vdevice->vtarget->channel) ||
+ (mf->TargetID != vdevice->vtarget->id) ||
+ memcmp(lun.scsi_lun, mf->LUN, 8))
continue;
+ dsprintk(( "search_running: found (sc=%p, mf = %p) "
+ "channel %d id %d, lun %d \n", hd->ScsiLookup[ii],
+ mf, mf->Bus, mf->TargetID, vdevice->lun));
/* Cleanup
*/
@@ -1065,12 +1131,6 @@ mptscsih_remove(struct pci_dev *pdev)
hd->ScsiLookup = NULL;
}
- /*
- * Free pointer array.
- */
- kfree(hd->Targets);
- hd->Targets = NULL;
-
dprintk((MYIOC_s_INFO_FMT
"Free'd ScsiLookup (%d) memory\n",
hd->ioc->name, sz1));
@@ -1317,14 +1377,6 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
return SCSI_MLQUEUE_HOST_BUSY;
}
- if ((hd->ioc->bus_type == SPI) &&
- vdev->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT &&
- mptscsih_raid_id_to_num(hd, SCpnt->device->id) < 0) {
- SCpnt->result = DID_NO_CONNECT << 16;
- done(SCpnt);
- return 0;
- }
-
/*
* Put together a MPT SCSI request...
*/
@@ -1368,8 +1420,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
/* Use the above information to set up the message frame
*/
- pScsiReq->TargetID = (u8) vdev->vtarget->target_id;
- pScsiReq->Bus = vdev->vtarget->bus_id;
+ pScsiReq->TargetID = (u8) vdev->vtarget->id;
+ pScsiReq->Bus = vdev->vtarget->channel;
pScsiReq->ChainOffset = 0;
if (vdev->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
@@ -1379,14 +1431,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
pScsiReq->Reserved = 0;
pScsiReq->MsgFlags = mpt_msg_flags();
- pScsiReq->LUN[0] = 0;
- pScsiReq->LUN[1] = lun;
- pScsiReq->LUN[2] = 0;
- pScsiReq->LUN[3] = 0;
- pScsiReq->LUN[4] = 0;
- pScsiReq->LUN[5] = 0;
- pScsiReq->LUN[6] = 0;
- pScsiReq->LUN[7] = 0;
+ int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
pScsiReq->Control = cpu_to_le32(scsictl);
/*
@@ -1491,14 +1536,14 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mptscsih_TMHandler - Generic handler for SCSI Task Management.
* Fall through to mpt_HardResetHandler if: not operational, too many
* failed TM requests or handshake failure.
*
* @ioc: Pointer to MPT_ADAPTER structure
* @type: Task Management type
- * @target: Logical Target ID for reset (if appropriate)
+ * @id: Logical Target ID for reset (if appropriate)
* @lun: Logical Unit for reset (if appropriate)
* @ctx2abort: Context for the task to be aborted (if appropriate)
*
@@ -1507,28 +1552,17 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
* Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
* will be active.
*
- * Returns 0 for SUCCESS or -1 if FAILED.
- */
+ * Returns 0 for SUCCESS, or FAILED.
+ **/
int
-mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout)
+mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
{
MPT_ADAPTER *ioc;
int rc = -1;
- int doTask = 1;
u32 ioc_raw_state;
unsigned long flags;
- /* If FW is being reloaded currently, return success to
- * the calling function.
- */
- if (hd == NULL)
- return 0;
-
ioc = hd->ioc;
- if (ioc == NULL) {
- printk(KERN_ERR MYNAM " TMHandler" " NULL ioc!\n");
- return FAILED;
- }
dtmprintk((MYIOC_s_INFO_FMT "TMHandler Entered!\n", ioc->name));
// SJR - CHECKME - Can we avoid this here?
@@ -1541,8 +1575,10 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, in
spin_unlock_irqrestore(&ioc->diagLock, flags);
/* Wait a fixed amount of time for the TM pending flag to be cleared.
- * If we time out and not bus reset, then we return a FAILED status to the caller.
- * The call to mptscsih_tm_pending_wait() will set the pending flag if we are
+ * If we time out and not bus reset, then we return a FAILED status
+ * to the caller.
+ * The call to mptscsih_tm_pending_wait() will set the pending flag
+ * if we are
* successful. Otherwise, reload the FW.
*/
if (mptscsih_tm_pending_wait(hd) == FAILED) {
@@ -1552,18 +1588,16 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, in
hd->ioc->name, hd->tmPending));
return FAILED;
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
- dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target reset: "
- "Timed out waiting for last TM (%d) to complete! \n",
- hd->ioc->name, hd->tmPending));
+ dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target "
+ "reset: Timed out waiting for last TM (%d) "
+ "to complete! \n", hd->ioc->name,
+ hd->tmPending));
return FAILED;
} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
dtmprintk((KERN_INFO MYNAM ": %s: TMHandler bus reset: "
"Timed out waiting for last TM (%d) to complete! \n",
hd->ioc->name, hd->tmPending));
- if (hd->tmPending & (1 << MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS))
- return FAILED;
-
- doTask = 0;
+ return FAILED;
}
} else {
spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
@@ -1571,47 +1605,40 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, in
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
}
- /* Is operational?
- */
ioc_raw_state = mpt_GetIocState(hd->ioc, 0);
-#ifdef MPT_DEBUG_RESET
if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
printk(MYIOC_s_WARN_FMT
- "TM Handler: IOC Not operational(0x%x)!\n",
- hd->ioc->name, ioc_raw_state);
- }
-#endif
-
- if (doTask && ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL)
- && !(ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
-
- /* Isse the Task Mgmt request.
- */
- if (hd->hard_resets < -1)
- hd->hard_resets++;
- rc = mptscsih_IssueTaskMgmt(hd, type, channel, target, lun, ctx2abort, timeout);
- if (rc) {
- printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n", hd->ioc->name);
- } else {
- dtmprintk((MYIOC_s_INFO_FMT "Issue of TaskMgmt Successful!\n", hd->ioc->name));
- }
+ "TM Handler for type=%x: IOC Not operational (0x%x)!\n",
+ ioc->name, type, ioc_raw_state);
+ printk(KERN_WARNING " Issuing HardReset!!\n");
+ if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
+ printk((KERN_WARNING "TMHandler: HardReset "
+ "FAILED!!\n"));
+ return FAILED;
}
- /* Only fall through to the HRH if this is a bus reset
- */
- if ((type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) && (rc ||
- ioc->reload_fw || (ioc->alt_ioc && ioc->alt_ioc->reload_fw))) {
- dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
- hd->ioc->name));
- rc = mpt_HardResetHandler(hd->ioc, CAN_SLEEP);
+ if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
+ printk(MYIOC_s_WARN_FMT
+ "TM Handler for type=%x: ioc_state: "
+ "DOORBELL_ACTIVE (0x%x)!\n",
+ ioc->name, type, ioc_raw_state);
+ return FAILED;
}
- /*
- * Check IOCStatus from TM reply message
+ /* Isse the Task Mgmt request.
*/
- if (hd->tm_iocstatus != MPI_IOCSTATUS_SUCCESS)
- rc = FAILED;
+ if (hd->hard_resets < -1)
+ hd->hard_resets++;
+
+ rc = mptscsih_IssueTaskMgmt(hd, type, channel, id, lun,
+ ctx2abort, timeout);
+ if (rc)
+ printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n",
+ hd->ioc->name);
+ else
+ dtmprintk((MYIOC_s_INFO_FMT "Issue of TaskMgmt Successful!\n",
+ hd->ioc->name));
dtmprintk((MYIOC_s_INFO_FMT "TMHandler rc = %d!\n", hd->ioc->name, rc));
@@ -1620,11 +1647,11 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, in
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
+/**
* mptscsih_IssueTaskMgmt - Generic send Task Management function.
* @hd: Pointer to MPT_SCSI_HOST structure
* @type: Task Management type
- * @target: Logical Target ID for reset (if appropriate)
+ * @id: Logical Target ID for reset (if appropriate)
* @lun: Logical Unit for reset (if appropriate)
* @ctx2abort: Context for the task to be aborted (if appropriate)
*
@@ -1633,11 +1660,11 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, in
*
* Not all fields are meaningfull for all task types.
*
- * Returns 0 for SUCCESS, -999 for "no msg frames",
- * else other non-zero value returned.
- */
+ * Returns 0 for SUCCESS, or FAILED.
+ *
+ **/
static int
-mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout)
+mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
{
MPT_FRAME_HDR *mf;
SCSITaskMgmt_t *pScsiTm;
@@ -1657,7 +1684,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun
/* Format the Request
*/
pScsiTm = (SCSITaskMgmt_t *) mf;
- pScsiTm->TargetID = target;
+ pScsiTm->TargetID = id;
pScsiTm->Bus = channel;
pScsiTm->ChainOffset = 0;
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
@@ -1668,42 +1695,59 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun
pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
- for (ii= 0; ii < 8; ii++) {
- pScsiTm->LUN[ii] = 0;
- }
- pScsiTm->LUN[1] = lun;
+ int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
for (ii=0; ii < 7; ii++)
pScsiTm->Reserved2[ii] = 0;
pScsiTm->TaskMsgContext = ctx2abort;
- dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
- hd->ioc->name, ctx2abort, type));
+ dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) "
+ "type=%d\n", hd->ioc->name, ctx2abort, type));
DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);
if ((retval = mpt_send_handshake_request(hd->ioc->TaskCtx, hd->ioc,
- sizeof(SCSITaskMgmt_t), (u32*)pScsiTm,
- CAN_SLEEP)) != 0) {
- dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!"
- " (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
- hd->ioc, mf));
- mpt_free_msg_frame(hd->ioc, mf);
- return retval;
+ sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP)) != 0) {
+ dfailprintk((MYIOC_s_ERR_FMT "send_handshake FAILED!"
+ " (hd %p, ioc %p, mf %p, rc=%d) \n", hd->ioc->name, hd,
+ hd->ioc, mf, retval));
+ goto fail_out;
}
if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
- dfailprintk((MYIOC_s_ERR_FMT "_wait_for_completion FAILED!"
+ dfailprintk((MYIOC_s_ERR_FMT "task management request TIMED OUT!"
" (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
hd->ioc, mf));
- mpt_free_msg_frame(hd->ioc, mf);
dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
hd->ioc->name));
retval = mpt_HardResetHandler(hd->ioc, CAN_SLEEP);
+ dtmprintk((MYIOC_s_INFO_FMT "rc=%d \n",
+ hd->ioc->name, retval));
+ goto fail_out;
}
+ /*
+ * Handle success case, see if theres a non-zero ioc_status.
+ */
+ if (hd->tm_iocstatus == MPI_IOCSTATUS_SUCCESS ||
+ hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+ hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
+ retval = 0;
+ else
+ retval = FAILED;
+
return retval;
+
+ fail_out:
+
+ /*
+ * Free task managment mf, and corresponding tm flags
+ */
+ mpt_free_msg_frame(hd->ioc, mf);
+ hd->tmPending = 0;
+ hd->tmState = TM_STATE_NONE;
+ return FAILED;
}
static int
@@ -1728,7 +1772,7 @@ mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
* (linux scsi_host_template.eh_abort_handler routine)
*
* Returns SUCCESS or FAILED.
- */
+ **/
int
mptscsih_abort(struct scsi_cmnd * SCpnt)
{
@@ -1764,9 +1808,8 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
return SUCCESS;
}
- if (hd->resetPending) {
+ if (hd->resetPending)
return FAILED;
- }
if (hd->timeouts < -1)
hd->timeouts++;
@@ -1789,13 +1832,12 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
- vdev->vtarget->bus_id, vdev->vtarget->target_id, vdev->lun,
+ vdev->vtarget->channel, vdev->vtarget->id, vdev->lun,
ctx2abort, mptscsih_get_tm_timeout(hd->ioc));
if (SCPNT_TO_LOOKUP_IDX(SCpnt) == scpnt_idx &&
- SCpnt->serial_number == sn) {
+ SCpnt->serial_number == sn)
retval = FAILED;
- }
printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
hd->ioc->name,
@@ -1803,12 +1845,8 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
if (retval == 0)
return SUCCESS;
-
- if(retval != FAILED ) {
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
- return FAILED;
+ else
+ return FAILED;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1819,7 +1857,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
* (linux scsi_host_template.eh_dev_reset_handler routine)
*
* Returns SUCCESS or FAILED.
- */
+ **/
int
mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
{
@@ -1845,7 +1883,7 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
- vdev->vtarget->bus_id, vdev->vtarget->target_id,
+ vdev->vtarget->channel, vdev->vtarget->id,
0, 0, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
@@ -1854,14 +1892,11 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
if (retval == 0)
return SUCCESS;
-
- if(retval != FAILED ) {
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
- return FAILED;
+ else
+ return FAILED;
}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant
@@ -1870,7 +1905,7 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
* (linux scsi_host_template.eh_bus_reset_handler routine)
*
* Returns SUCCESS or FAILED.
- */
+ **/
int
mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
{
@@ -1896,7 +1931,7 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
vdev = SCpnt->device->hostdata;
retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
- vdev->vtarget->bus_id, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc));
+ vdev->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(hd->ioc));
printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
hd->ioc->name,
@@ -1904,12 +1939,8 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
if (retval == 0)
return SUCCESS;
-
- if(retval != FAILED ) {
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
- return FAILED;
+ else
+ return FAILED;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1992,7 +2023,6 @@ mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
/**
* mptscsih_tm_wait_for_completion - wait for completion of TM task
* @hd: Pointer to MPT host structure.
- * @timeout: timeout in seconds
*
* Returns {SUCCESS,FAILED}.
*/
@@ -2066,7 +2096,7 @@ mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
* load/init time via the mpt_register() API call.
*
* Returns 1 indicating alloc'd request frame ptr should be freed.
- */
+ **/
int
mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
{
@@ -2076,78 +2106,85 @@ mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *m
unsigned long flags;
u16 iocstatus;
u8 tmType;
+ u32 termination_count;
dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
- ioc->name, mf, mr));
- if (ioc->sh) {
- /* Depending on the thread, a timer is activated for
- * the TM request. Delete this timer on completion of TM.
- * Decrement count of outstanding TM requests.
- */
- hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
- } else {
- dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt Complete: NULL Scsi Host Ptr\n",
- ioc->name));
+ ioc->name, mf, mr));
+ if (!ioc->sh) {
+ dtmprintk((MYIOC_s_WARN_FMT
+ "TaskMgmt Complete: NULL Scsi Host Ptr\n", ioc->name));
return 1;
}
if (mr == NULL) {
- dtmprintk((MYIOC_s_WARN_FMT "ERROR! TaskMgmt Reply: NULL Request %p\n",
- ioc->name, mf));
+ dtmprintk((MYIOC_s_WARN_FMT
+ "ERROR! TaskMgmt Reply: NULL Request %p\n", ioc->name, mf));
return 1;
- } else {
- pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
- pScsiTmReq = (SCSITaskMgmt_t*)mf;
-
- /* Figure out if this was ABORT_TASK, TARGET_RESET, or BUS_RESET! */
- tmType = pScsiTmReq->TaskType;
+ }
- if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
- pScsiTmReply->ResponseCode)
- mptscsih_taskmgmt_response_code(ioc,
- pScsiTmReply->ResponseCode);
+ hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+ pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
+ pScsiTmReq = (SCSITaskMgmt_t*)mf;
+ tmType = pScsiTmReq->TaskType;
+ iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+ termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
+
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
+ pScsiTmReply->ResponseCode)
+ mptscsih_taskmgmt_response_code(ioc,
+ pScsiTmReply->ResponseCode);
+ DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply);
+
+#if defined(MPT_DEBUG_REPLY) || defined(MPT_DEBUG_TM)
+ printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
+ "iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
+ "term_cmnds=%d\n", __FUNCTION__, ioc->id, pScsiTmReply->Bus,
+ pScsiTmReply->TargetID, pScsiTmReq->TaskType,
+ le16_to_cpu(pScsiTmReply->IOCStatus),
+ le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
+ le32_to_cpu(pScsiTmReply->TerminationCount));
+#endif
+ if (!iocstatus) {
+ dtmprintk((MYIOC_s_WARN_FMT " TaskMgmt SUCCESS\n", ioc->name));
+ hd->abortSCpnt = NULL;
+ goto out;
+ }
- dtmprintk((MYIOC_s_WARN_FMT " TaskType = %d, TerminationCount=%d\n",
- ioc->name, tmType, le32_to_cpu(pScsiTmReply->TerminationCount)));
- DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply);
+ /* Error? (anything non-zero?) */
- iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
- hd->tm_iocstatus = iocstatus;
- dtmprintk((MYIOC_s_WARN_FMT " SCSI TaskMgmt (%d) IOCStatus=%04x IOCLogInfo=%08x\n",
- ioc->name, tmType, iocstatus, le32_to_cpu(pScsiTmReply->IOCLogInfo)));
- /* Error? (anything non-zero?) */
- if (iocstatus) {
+ /* clear flags and continue.
+ */
+ switch (tmType) {
- /* clear flags and continue.
- */
- if (tmType == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
- hd->abortSCpnt = NULL;
+ case MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
+ if (termination_count == 1)
+ iocstatus = MPI_IOCSTATUS_SCSI_TASK_TERMINATED;
+ hd->abortSCpnt = NULL;
+ break;
- /* If an internal command is present
- * or the TM failed - reload the FW.
- * FC FW may respond FAILED to an ABORT
- */
- if (tmType == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
- if ((hd->cmdPtr) ||
- (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED)) {
- if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0) {
- printk((KERN_WARNING
- " Firmware Reload FAILED!!\n"));
- }
- }
- }
- } else {
- dtmprintk((MYIOC_s_WARN_FMT " TaskMgmt SUCCESS\n", ioc->name));
+ case MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS:
- hd->abortSCpnt = NULL;
+ /* If an internal command is present
+ * or the TM failed - reload the FW.
+ * FC FW may respond FAILED to an ABORT
+ */
+ if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED ||
+ hd->cmdPtr)
+ if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
+ printk((KERN_WARNING " Firmware Reload FAILED!!\n"));
+ break;
- }
+ case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
+ default:
+ break;
}
+ out:
spin_lock_irqsave(&ioc->FreeQlock, flags);
hd->tmPending = 0;
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
hd->tmState = TM_STATE_NONE;
+ hd->tm_iocstatus = iocstatus;
+ spin_unlock_irqrestore(&ioc->FreeQlock, flags);
return 1;
}
@@ -2191,7 +2228,7 @@ mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
dprintk((KERN_NOTICE
": bios_param: Id=%i Lun=%i Channel=%i CHS=%i/%i/%i\n",
- sdev->id, sdev->lun,sdev->channel,(int)cylinders,heads,sectors));
+ sdev->id, sdev->lun, sdev->channel, (int)cylinders, heads, sectors));
return 0;
}
@@ -2200,115 +2237,78 @@ mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
*
*/
int
-mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
+mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
+ struct inactive_raid_component_info *component_info;
int i;
+ int rc = 0;
- if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
- return 0;
+ if (!ioc->raid_data.pIocPg3)
+ goto out;
for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
- if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
- return 1;
- }
- return 0;
-}
-EXPORT_SYMBOL(mptscsih_is_phys_disk);
-
-int
-mptscsih_raid_id_to_num(MPT_SCSI_HOST *hd, uint physdiskid)
-{
- int i;
-
- if (!hd->ioc->raid_data.isRaid || !hd->ioc->raid_data.pIocPg3)
- return -ENXIO;
-
- for (i = 0; i < hd->ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
- if (physdiskid ==
- hd->ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
- return hd->ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
+ if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
+ (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
+ rc = 1;
+ goto out;
+ }
}
- return -ENXIO;
-}
-EXPORT_SYMBOL(mptscsih_raid_id_to_num);
+ /*
+ * Check inactive list for matching phys disks
+ */
+ if (list_empty(&ioc->raid_data.inactive_list))
+ goto out;
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * OS entry point to allow host driver to alloc memory
- * for each scsi target. Called once per device the bus scan.
- * Return non-zero if allocation fails.
- */
-int
-mptscsih_target_alloc(struct scsi_target *starget)
-{
- VirtTarget *vtarget;
+ down(&ioc->raid_data.inactive_list_mutex);
+ list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
+ list) {
+ if ((component_info->d.PhysDiskID == id) &&
+ (component_info->d.PhysDiskBus == channel))
+ rc = 1;
+ }
+ up(&ioc->raid_data.inactive_list_mutex);
- vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
- if (!vtarget)
- return -ENOMEM;
- starget->hostdata = vtarget;
- vtarget->starget = starget;
- return 0;
+ out:
+ return rc;
}
+EXPORT_SYMBOL(mptscsih_is_phys_disk);
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * OS entry point to allow host driver to alloc memory
- * for each scsi device. Called once per device the bus scan.
- * Return non-zero if allocation fails.
- */
-int
-mptscsih_slave_alloc(struct scsi_device *sdev)
+u8
+mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
- struct Scsi_Host *host = sdev->host;
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
- VirtTarget *vtarget;
- VirtDevice *vdev;
- struct scsi_target *starget;
+ struct inactive_raid_component_info *component_info;
+ int i;
+ int rc = -ENXIO;
- vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
- if (!vdev) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
- hd->ioc->name, sizeof(VirtDevice));
- return -ENOMEM;
+ if (!ioc->raid_data.pIocPg3)
+ goto out;
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
+ (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
+ rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
+ goto out;
+ }
}
- vdev->lun = sdev->lun;
- sdev->hostdata = vdev;
-
- starget = scsi_target(sdev);
- vtarget = starget->hostdata;
+ /*
+ * Check inactive list for matching phys disks
+ */
+ if (list_empty(&ioc->raid_data.inactive_list))
+ goto out;
- vdev->vtarget = vtarget;
-
- if (vtarget->num_luns == 0) {
- hd->Targets[sdev->id] = vtarget;
- vtarget->ioc_id = hd->ioc->id;
- vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
- vtarget->target_id = sdev->id;
- vtarget->bus_id = sdev->channel;
- if (hd->ioc->bus_type == SPI && sdev->channel == 0 &&
- hd->ioc->raid_data.isRaid & (1 << sdev->id)) {
- vtarget->raidVolume = 1;
- ddvtprintk((KERN_INFO
- "RAID Volume @ id %d\n", sdev->id));
- }
+ down(&ioc->raid_data.inactive_list_mutex);
+ list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
+ list) {
+ if ((component_info->d.PhysDiskID == id) &&
+ (component_info->d.PhysDiskBus == channel))
+ rc = component_info->d.PhysDiskNum;
}
- vtarget->num_luns++;
- return 0;
-}
+ up(&ioc->raid_data.inactive_list_mutex);
-/*
- * OS entry point to allow for host driver to free allocated memory
- * Called if no device present or device being unloaded
- */
-void
-mptscsih_target_destroy(struct scsi_target *starget)
-{
- if (starget->hostdata)
- kfree(starget->hostdata);
- starget->hostdata = NULL;
+ out:
+ return rc;
}
+EXPORT_SYMBOL(mptscsih_raid_id_to_num);
/*
* OS entry point to allow for host driver to free allocated memory
@@ -2328,11 +2328,7 @@ mptscsih_slave_destroy(struct scsi_device *sdev)
vdevice = sdev->hostdata;
mptscsih_search_running_cmds(hd, vdevice);
- vtarget->luns[0] &= ~(1 << vdevice->lun);
vtarget->num_luns--;
- if (vtarget->num_luns == 0) {
- hd->Targets[sdev->id] = NULL;
- }
mptscsih_synchronize_cache(hd, vdevice);
kfree(vdevice);
sdev->hostdata = NULL;
@@ -2394,15 +2390,14 @@ mptscsih_slave_configure(struct scsi_device *sdev)
VirtDevice *vdevice;
struct scsi_target *starget;
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sh->hostdata;
- int indexed_lun, lun_index;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
vdevice = sdev->hostdata;
dsprintk((MYIOC_s_INFO_FMT
- "device @ %p, id=%d, LUN=%d, channel=%d\n",
- hd->ioc->name, sdev, sdev->id, sdev->lun, sdev->channel));
+ "device @ %p, channel=%d, id=%d, lun=%d\n",
+ hd->ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
if (hd->ioc->bus_type == SPI)
dsprintk((MYIOC_s_INFO_FMT
"sdtr %d wdtr %d ppr %d inq length=%d\n",
@@ -2415,11 +2410,7 @@ mptscsih_slave_configure(struct scsi_device *sdev)
goto slave_configure_exit;
}
- vdevice->configured_lun=1;
- lun_index = (vdevice->lun >> 5); /* 32 luns per lun_index */
- indexed_lun = (vdevice->lun % 32);
- vtarget->luns[lun_index] |= (1 << indexed_lun);
- mptscsih_initTarget(hd, vtarget, sdev);
+ vdevice->configured_lun = 1;
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
dsprintk((MYIOC_s_INFO_FMT
@@ -2683,285 +2674,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
- * mptscsih_initTarget - Target, LUN alloc/free functionality.
- * @hd: Pointer to MPT_SCSI_HOST structure
- * @vtarget: per target private data
- * @sdev: SCSI device
- *
- * NOTE: It's only SAFE to call this routine if data points to
- * sane & valid STANDARD INQUIRY data!
- *
- * Allocate and initialize memory for this target.
- * Save inquiry data.
- *
- */
-static void
-mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
- struct scsi_device *sdev)
-{
- dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
- hd->ioc->name, vtarget->bus_id, vtarget->target_id,
- sdev->lun, hd));
-
- /* Is LUN supported? If so, upper 2 bits will be 0
- * in first byte of inquiry data.
- */
- if (sdev->inq_periph_qual != 0)
- return;
-
- if (vtarget == NULL)
- return;
-
- vtarget->type = sdev->type;
-
- if (hd->ioc->bus_type != SPI)
- return;
-
- if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
- /* Treat all Processors as SAF-TE if
- * command line option is set */
- vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
- mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id);
- }else if ((sdev->type == TYPE_PROCESSOR) &&
- !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
- if (sdev->inquiry_len > 49 ) {
- if (sdev->inquiry[44] == 'S' &&
- sdev->inquiry[45] == 'A' &&
- sdev->inquiry[46] == 'F' &&
- sdev->inquiry[47] == '-' &&
- sdev->inquiry[48] == 'T' &&
- sdev->inquiry[49] == 'E' ) {
- vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
- mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id);
- }
- }
- }
- mptscsih_setTargetNegoParms(hd, vtarget, sdev);
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * Update the target negotiation parameters based on the
- * the Inquiry data, adapter capabilities, and NVRAM settings.
- *
- */
-static void
-mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
- struct scsi_device *sdev)
-{
- SpiCfgData *pspi_data = &hd->ioc->spi_data;
- int id = (int) target->target_id;
- int nvram;
- u8 width = MPT_NARROW;
- u8 factor = MPT_ASYNC;
- u8 offset = 0;
- u8 nfactor;
- u8 noQas = 1;
-
- target->negoFlags = pspi_data->noQas;
-
- /* noQas == 0 => device supports QAS. */
-
- if (sdev->scsi_level < SCSI_2) {
- width = 0;
- factor = MPT_ULTRA2;
- offset = pspi_data->maxSyncOffset;
- target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
- } else {
- if (scsi_device_wide(sdev)) {
- width = 1;
- }
-
- if (scsi_device_sync(sdev)) {
- factor = pspi_data->minSyncFactor;
- if (!scsi_device_dt(sdev))
- factor = MPT_ULTRA2;
- else {
- if (!scsi_device_ius(sdev) &&
- !scsi_device_qas(sdev))
- factor = MPT_ULTRA160;
- else {
- factor = MPT_ULTRA320;
- if (scsi_device_qas(sdev)) {
- ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
- noQas = 0;
- }
- if (sdev->type == TYPE_TAPE &&
- scsi_device_ius(sdev))
- target->negoFlags |= MPT_TAPE_NEGO_IDP;
- }
- }
- offset = pspi_data->maxSyncOffset;
-
- /* If RAID, never disable QAS
- * else if non RAID, do not disable
- * QAS if bit 1 is set
- * bit 1 QAS support, non-raid only
- * bit 0 IU support
- */
- if (target->raidVolume == 1) {
- noQas = 0;
- }
- } else {
- factor = MPT_ASYNC;
- offset = 0;
- }
- }
-
- if (!sdev->tagged_supported) {
- target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
- }
-
- /* Update tflags based on NVRAM settings. (SCSI only)
- */
- if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- nvram = pspi_data->nvram[id];
- nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
-
- if (width)
- width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
-
- if (offset > 0) {
- /* Ensure factor is set to the
- * maximum of: adapter, nvram, inquiry
- */
- if (nfactor) {
- if (nfactor < pspi_data->minSyncFactor )
- nfactor = pspi_data->minSyncFactor;
-
- factor = max(factor, nfactor);
- if (factor == MPT_ASYNC)
- offset = 0;
- } else {
- offset = 0;
- factor = MPT_ASYNC;
- }
- } else {
- factor = MPT_ASYNC;
- }
- }
-
- /* Make sure data is consistent
- */
- if ((!width) && (factor < MPT_ULTRA2)) {
- factor = MPT_ULTRA2;
- }
-
- /* Save the data to the target structure.
- */
- target->minSyncFactor = factor;
- target->maxOffset = offset;
- target->maxWidth = width;
-
- target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
-
- /* Disable unused features.
- */
- if (!width)
- target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
-
- if (!offset)
- target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
-
- if ( factor > MPT_ULTRA320 )
- noQas = 0;
-
- if (noQas && (pspi_data->noQas == 0)) {
- pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
- target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
-
- /* Disable QAS in a mixed configuration case
- */
-
- ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
- }
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * SCSI Config Page functionality ...
- */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_writeIOCPage4 - write IOC Page 4
- * @hd: Pointer to a SCSI Host Structure
- * @target_id: write IOC Page4 for this ID & Bus
- *
- * Return: -EAGAIN if unable to obtain a Message Frame
- * or 0 if success.
- *
- * Remark: We do not wait for a return, write pages sequentially.
- */
-static int
-mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- Config_t *pReq;
- IOCPage4_t *IOCPage4Ptr;
- MPT_FRAME_HDR *mf;
- dma_addr_t dataDma;
- u16 req_idx;
- u32 frameOffset;
- u32 flagsLength;
- int ii;
-
- /* Get a MF for this command.
- */
- if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
- ioc->name));
- return -EAGAIN;
- }
-
- /* Set the request and the data pointers.
- * Place data at end of MF.
- */
- pReq = (Config_t *)mf;
-
- req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
-
- /* Complete the request frame (same for all requests).
- */
- pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- pReq->Reserved = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_CONFIG;
- pReq->ExtPageLength = 0;
- pReq->ExtPageType = 0;
- pReq->MsgFlags = 0;
- for (ii=0; ii < 8; ii++) {
- pReq->Reserved2[ii] = 0;
- }
-
- IOCPage4Ptr = ioc->spi_data.pIocPg4;
- dataDma = ioc->spi_data.IocPg4_dma;
- ii = IOCPage4Ptr->ActiveSEP++;
- IOCPage4Ptr->SEP[ii].SEPTargetID = target_id;
- IOCPage4Ptr->SEP[ii].SEPBus = bus;
- pReq->Header = IOCPage4Ptr->Header;
- pReq->PageAddress = cpu_to_le32(target_id | (bus << 8 ));
-
- /* Add a SGE to the config request.
- */
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
- (IOCPage4Ptr->Header.PageLength + ii) * 4;
-
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
-
- dinitprintk((MYIOC_s_INFO_FMT
- "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
- ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, target_id, bus));
-
- mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
-
- return 0;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
* Bus Scan and Domain Validation functionality ...
*/
@@ -3343,7 +3055,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
} else {
pScsiReq->TargetID = io->id;
- pScsiReq->Bus = io->bus;
+ pScsiReq->Bus = io->channel;
pScsiReq->ChainOffset = 0;
pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
}
@@ -3356,9 +3068,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
pScsiReq->MsgFlags = mpt_msg_flags();
/* MsgContext set in mpt_get_msg_fram call */
- for (ii=0; ii < 8; ii++)
- pScsiReq->LUN[ii] = 0;
- pScsiReq->LUN[1] = io->lun;
+ int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
if (io->flags & MPT_ICFLAG_TAGGED_CMD)
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
@@ -3379,7 +3089,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
+ (my_idx * MPT_SENSE_BUFFER_ALLOC));
ddvprintk((MYIOC_s_INFO_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
- hd->ioc->name, cmd, io->bus, io->id, io->lun));
+ hd->ioc->name, cmd, io->channel, io->id, io->lun));
if (dir == MPI_SCSIIO_CONTROL_READ) {
mpt_add_sge((char *) &pScsiReq->SGL,
@@ -3462,9 +3172,9 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
iocmd.data_dma = -1;
iocmd.size = 0;
iocmd.rsvd = iocmd.rsvd2 = 0;
- iocmd.bus = vdevice->vtarget->bus_id;
- iocmd.id = vdevice->vtarget->target_id;
- iocmd.lun = (u8)vdevice->lun;
+ iocmd.channel = vdevice->vtarget->channel;
+ iocmd.id = vdevice->vtarget->id;
+ iocmd.lun = vdevice->lun;
if ((vdevice->vtarget->type == TYPE_DISK) &&
(vdevice->configured_lun))
@@ -3480,9 +3190,6 @@ EXPORT_SYMBOL(mptscsih_resume);
EXPORT_SYMBOL(mptscsih_proc_info);
EXPORT_SYMBOL(mptscsih_info);
EXPORT_SYMBOL(mptscsih_qcmd);
-EXPORT_SYMBOL(mptscsih_target_alloc);
-EXPORT_SYMBOL(mptscsih_slave_alloc);
-EXPORT_SYMBOL(mptscsih_target_destroy);
EXPORT_SYMBOL(mptscsih_slave_destroy);
EXPORT_SYMBOL(mptscsih_slave_configure);
EXPORT_SYMBOL(mptscsih_abort);
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 187c8af0890..843c01a6aa0 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -6,7 +6,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -53,6 +53,24 @@
* SCSI Public stuff...
*/
+#define MPT_SCANDV_GOOD (0x00000000) /* must be 0 */
+#define MPT_SCANDV_DID_RESET (0x00000001)
+#define MPT_SCANDV_SENSE (0x00000002)
+#define MPT_SCANDV_SOME_ERROR (0x00000004)
+#define MPT_SCANDV_SELECTION_TIMEOUT (0x00000008)
+#define MPT_SCANDV_ISSUE_SENSE (0x00000010)
+#define MPT_SCANDV_FALLBACK (0x00000020)
+
+#define MPT_SCANDV_MAX_RETRIES (10)
+
+#define MPT_ICFLAG_BUF_CAP 0x01 /* ReadBuffer Read Capacity format */
+#define MPT_ICFLAG_ECHO 0x02 /* ReadBuffer Echo buffer format */
+#define MPT_ICFLAG_EBOS 0x04 /* ReadBuffer Echo buffer has EBOS */
+#define MPT_ICFLAG_PHYS_DISK 0x08 /* Any SCSI IO but do Phys Disk Format */
+#define MPT_ICFLAG_TAGGED_CMD 0x10 /* Do tagged IO */
+#define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occurred with this command */
+#define MPT_ICFLAG_RESERVED 0x40 /* Reserved has been issued */
+
#define MPT_SCSI_CMD_PER_DEV_HIGH 64
#define MPT_SCSI_CMD_PER_DEV_LOW 32
@@ -69,9 +87,22 @@
#define MPTSCSIH_SAF_TE 0
#define MPTSCSIH_PT_CLEAR 0
-
#endif
+typedef struct _internal_cmd {
+ char *data; /* data pointer */
+ dma_addr_t data_dma; /* data dma address */
+ int size; /* transfer size */
+ u8 cmd; /* SCSI Op Code */
+ u8 channel; /* bus number */
+ u8 id; /* SCSI ID (virtual) */
+ int lun;
+ u8 flags; /* Bit Field - See above */
+ u8 physDiskNum; /* Phys disk number, -1 else */
+ u8 rsvd2;
+ u8 rsvd;
+} INTERNAL_CMD;
+
extern void mptscsih_remove(struct pci_dev *);
extern void mptscsih_shutdown(struct pci_dev *);
#ifdef CONFIG_PM
@@ -81,9 +112,6 @@ extern int mptscsih_resume(struct pci_dev *pdev);
extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func);
extern const char * mptscsih_info(struct Scsi_Host *SChost);
extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *));
-extern int mptscsih_target_alloc(struct scsi_target *starget);
-extern int mptscsih_slave_alloc(struct scsi_device *device);
-extern void mptscsih_target_destroy(struct scsi_target *starget);
extern void mptscsih_slave_destroy(struct scsi_device *device);
extern int mptscsih_slave_configure(struct scsi_device *device);
extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
@@ -98,6 +126,6 @@ extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pE
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
extern void mptscsih_timer_expired(unsigned long data);
-extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
-extern int mptscsih_raid_id_to_num(MPT_SCSI_HOST *hd, uint physdiskid);
-extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
+extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
+extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
+extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 203c661d2c7..c31a9e3c8a2 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -4,7 +4,7 @@
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2007 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * (mailto:mpt_linux_developer@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -65,6 +65,7 @@
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_spi.h>
+#include <scsi/scsi_dbg.h>
#include "mptbase.h"
#include "mptscsih.h"
@@ -95,25 +96,339 @@ static int mptspiDoneCtx = -1;
static int mptspiTaskCtx = -1;
static int mptspiInternalCtx = -1; /* Used only for internal commands */
+/**
+ * mptspi_setTargetNegoParms - Update the target negotiation
+ * parameters based on the the Inquiry data, adapter capabilities,
+ * and NVRAM settings
+ *
+ * @hd: Pointer to a SCSI Host Structure
+ * @vtarget: per target private data
+ * @sdev: SCSI device
+ *
+ **/
+static void
+mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
+ struct scsi_device *sdev)
+{
+ SpiCfgData *pspi_data = &hd->ioc->spi_data;
+ int id = (int) target->id;
+ int nvram;
+ u8 width = MPT_NARROW;
+ u8 factor = MPT_ASYNC;
+ u8 offset = 0;
+ u8 nfactor;
+ u8 noQas = 1;
+
+ target->negoFlags = pspi_data->noQas;
+
+ if (sdev->scsi_level < SCSI_2) {
+ width = 0;
+ factor = MPT_ULTRA2;
+ offset = pspi_data->maxSyncOffset;
+ target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
+ } else {
+ if (scsi_device_wide(sdev))
+ width = 1;
+
+ if (scsi_device_sync(sdev)) {
+ factor = pspi_data->minSyncFactor;
+ if (!scsi_device_dt(sdev))
+ factor = MPT_ULTRA2;
+ else {
+ if (!scsi_device_ius(sdev) &&
+ !scsi_device_qas(sdev))
+ factor = MPT_ULTRA160;
+ else {
+ factor = MPT_ULTRA320;
+ if (scsi_device_qas(sdev)) {
+ ddvprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
+ noQas = 0;
+ }
+ if (sdev->type == TYPE_TAPE &&
+ scsi_device_ius(sdev))
+ target->negoFlags |= MPT_TAPE_NEGO_IDP;
+ }
+ }
+ offset = pspi_data->maxSyncOffset;
+
+ /* If RAID, never disable QAS
+ * else if non RAID, do not disable
+ * QAS if bit 1 is set
+ * bit 1 QAS support, non-raid only
+ * bit 0 IU support
+ */
+ if (target->raidVolume == 1)
+ noQas = 0;
+ } else {
+ factor = MPT_ASYNC;
+ offset = 0;
+ }
+ }
+
+ if (!sdev->tagged_supported)
+ target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
+
+ /* Update tflags based on NVRAM settings. (SCSI only)
+ */
+ if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
+ nvram = pspi_data->nvram[id];
+ nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
+
+ if (width)
+ width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
+
+ if (offset > 0) {
+ /* Ensure factor is set to the
+ * maximum of: adapter, nvram, inquiry
+ */
+ if (nfactor) {
+ if (nfactor < pspi_data->minSyncFactor )
+ nfactor = pspi_data->minSyncFactor;
+
+ factor = max(factor, nfactor);
+ if (factor == MPT_ASYNC)
+ offset = 0;
+ } else {
+ offset = 0;
+ factor = MPT_ASYNC;
+ }
+ } else {
+ factor = MPT_ASYNC;
+ }
+ }
+
+ /* Make sure data is consistent
+ */
+ if ((!width) && (factor < MPT_ULTRA2))
+ factor = MPT_ULTRA2;
+
+ /* Save the data to the target structure.
+ */
+ target->minSyncFactor = factor;
+ target->maxOffset = offset;
+ target->maxWidth = width;
+
+ target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
+
+ /* Disable unused features.
+ */
+ if (!width)
+ target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
+
+ if (!offset)
+ target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
+
+ if ( factor > MPT_ULTRA320 )
+ noQas = 0;
+
+ if (noQas && (pspi_data->noQas == 0)) {
+ pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
+ target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
+
+ /* Disable QAS in a mixed configuration case
+ */
+
+ ddvprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
+ }
+}
+
+/**
+ * mptspi_writeIOCPage4 - write IOC Page 4
+ * @hd: Pointer to a SCSI Host Structure
+ * @channel:
+ * @id: write IOC Page4 for this ID & Bus
+ *
+ * Return: -EAGAIN if unable to obtain a Message Frame
+ * or 0 if success.
+ *
+ * Remark: We do not wait for a return, write pages sequentially.
+ **/
+static int
+mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id)
+{
+ MPT_ADAPTER *ioc = hd->ioc;
+ Config_t *pReq;
+ IOCPage4_t *IOCPage4Ptr;
+ MPT_FRAME_HDR *mf;
+ dma_addr_t dataDma;
+ u16 req_idx;
+ u32 frameOffset;
+ u32 flagsLength;
+ int ii;
+
+ /* Get a MF for this command.
+ */
+ if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
+ dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
+ ioc->name));
+ return -EAGAIN;
+ }
+
+ /* Set the request and the data pointers.
+ * Place data at end of MF.
+ */
+ pReq = (Config_t *)mf;
+
+ req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
+ frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
+
+ /* Complete the request frame (same for all requests).
+ */
+ pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ pReq->Reserved = 0;
+ pReq->ChainOffset = 0;
+ pReq->Function = MPI_FUNCTION_CONFIG;
+ pReq->ExtPageLength = 0;
+ pReq->ExtPageType = 0;
+ pReq->MsgFlags = 0;
+ for (ii=0; ii < 8; ii++) {
+ pReq->Reserved2[ii] = 0;
+ }
+
+ IOCPage4Ptr = ioc->spi_data.pIocPg4;
+ dataDma = ioc->spi_data.IocPg4_dma;
+ ii = IOCPage4Ptr->ActiveSEP++;
+ IOCPage4Ptr->SEP[ii].SEPTargetID = id;
+ IOCPage4Ptr->SEP[ii].SEPBus = channel;
+ pReq->Header = IOCPage4Ptr->Header;
+ pReq->PageAddress = cpu_to_le32(id | (channel << 8 ));
+
+ /* Add a SGE to the config request.
+ */
+ flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
+ (IOCPage4Ptr->Header.PageLength + ii) * 4;
+
+ mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+
+ ddvprintk((MYIOC_s_INFO_FMT
+ "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
+ ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel));
+
+ mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
+
+ return 0;
+}
+
+/**
+ * mptspi_initTarget - Target, LUN alloc/free functionality.
+ * @hd: Pointer to MPT_SCSI_HOST structure
+ * @vtarget: per target private data
+ * @sdev: SCSI device
+ *
+ * NOTE: It's only SAFE to call this routine if data points to
+ * sane & valid STANDARD INQUIRY data!
+ *
+ * Allocate and initialize memory for this target.
+ * Save inquiry data.
+ *
+ **/
+static void
+mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
+ struct scsi_device *sdev)
+{
+
+ /* Is LUN supported? If so, upper 2 bits will be 0
+ * in first byte of inquiry data.
+ */
+ if (sdev->inq_periph_qual != 0)
+ return;
+
+ if (vtarget == NULL)
+ return;
+
+ vtarget->type = sdev->type;
+
+ if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
+ /* Treat all Processors as SAF-TE if
+ * command line option is set */
+ vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
+ mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
+ }else if ((sdev->type == TYPE_PROCESSOR) &&
+ !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
+ if (sdev->inquiry_len > 49 ) {
+ if (sdev->inquiry[44] == 'S' &&
+ sdev->inquiry[45] == 'A' &&
+ sdev->inquiry[46] == 'F' &&
+ sdev->inquiry[47] == '-' &&
+ sdev->inquiry[48] == 'T' &&
+ sdev->inquiry[49] == 'E' ) {
+ vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
+ mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
+ }
+ }
+ }
+ mptspi_setTargetNegoParms(hd, vtarget, sdev);
+}
+
+/**
+ * mptspi_is_raid - Determines whether target is belonging to volume
+ * @hd: Pointer to a SCSI HOST structure
+ * @id: target device id
+ *
+ * Return:
+ * non-zero = true
+ * zero = false
+ *
+ */
+static int
+mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id)
+{
+ int i, rc = 0;
+
+ if (!hd->ioc->raid_data.pIocPg2)
+ goto out;
+
+ if (!hd->ioc->raid_data.pIocPg2->NumActiveVolumes)
+ goto out;
+ for (i=0; i < hd->ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+ if (hd->ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) {
+ rc = 1;
+ goto out;
+ }
+ }
+
+ out:
+ return rc;
+}
+
static int mptspi_target_alloc(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)shost->hostdata;
- int ret;
+ VirtTarget *vtarget;
if (hd == NULL)
return -ENODEV;
- ret = mptscsih_target_alloc(starget);
- if (ret)
- return ret;
+ vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
+ if (!vtarget)
+ return -ENOMEM;
+
+ vtarget->ioc_id = hd->ioc->id;
+ vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
+ vtarget->id = (u8)starget->id;
+ vtarget->channel = (u8)starget->channel;
+ vtarget->starget = starget;
+ starget->hostdata = vtarget;
+
+ if (starget->channel == 1) {
+ if (mptscsih_is_phys_disk(hd->ioc, 0, starget->id) == 0)
+ return 0;
+ vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+ /* The real channel for this device is zero */
+ vtarget->channel = 0;
+ /* The actual physdisknum (for RAID passthrough) */
+ vtarget->id = mptscsih_raid_id_to_num(hd->ioc, 0,
+ starget->id);
+ }
- /* if we're a device on virtual channel 1 and we're not part
- * of an array, just return here (otherwise the setup below
- * may actually affect a real physical device on channel 0 */
- if (starget->channel == 1 &&
- mptscsih_raid_id_to_num(hd, starget->id) < 0)
- return 0;
+ if (starget->channel == 0 &&
+ mptspi_is_raid(hd, starget->id)) {
+ vtarget->raidVolume = 1;
+ ddvprintk((KERN_INFO
+ "RAID Volume @ channel=%d id=%d\n", starget->channel,
+ starget->id));
+ }
if (hd->ioc->spi_data.nvram &&
hd->ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) {
@@ -132,6 +447,64 @@ static int mptspi_target_alloc(struct scsi_target *starget)
return 0;
}
+void
+mptspi_target_destroy(struct scsi_target *starget)
+{
+ if (starget->hostdata)
+ kfree(starget->hostdata);
+ starget->hostdata = NULL;
+}
+
+/**
+ * mptspi_print_write_nego - negotiation parameters debug info that is being sent
+ * @hd: Pointer to a SCSI HOST structure
+ * @starget: SCSI target
+ * @ii: negotiation parameters
+ *
+ */
+static void
+mptspi_print_write_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii)
+{
+ ddvprintk((MYIOC_s_INFO_FMT "id=%d Requested = 0x%08x"
+ " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
+ hd->ioc->name, starget->id, ii,
+ ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "",
+ ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF),
+ ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": ""));
+}
+
+/**
+ * mptspi_print_read_nego - negotiation parameters debug info that is being read
+ * @hd: Pointer to a SCSI HOST structure
+ * @starget: SCSI target
+ * @ii: negotiation parameters
+ *
+ */
+static void
+mptspi_print_read_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii)
+{
+ ddvprintk((MYIOC_s_INFO_FMT "id=%d Read = 0x%08x"
+ " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
+ hd->ioc->name, starget->id, ii,
+ ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "",
+ ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF),
+ ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "",
+ ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": ""));
+}
+
static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0)
{
@@ -147,7 +520,7 @@ static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
/* No SPI parameters for RAID devices */
if (starget->channel == 0 &&
- (hd->ioc->raid_data.isRaid & (1 << starget->id)))
+ mptspi_is_raid(hd, starget->id))
return -1;
size = ioc->spi_data.sdp0length * 4;
@@ -185,6 +558,8 @@ static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
err = 0;
memcpy(pass_pg0, pg0, size);
+ mptspi_print_read_nego(hd, starget, le32_to_cpu(pg0->NegotiatedParameters));
+
out_free:
dma_free_coherent(&ioc->pcidev->dev, size, pg0, pg0_dma);
return err;
@@ -233,7 +608,7 @@ static void mptspi_read_parameters(struct scsi_target *starget)
}
static int
-mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, int disk)
+mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
{
MpiRaidActionRequest_t *pReq;
MPT_FRAME_HDR *mf;
@@ -253,8 +628,8 @@ mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, int disk)
pReq->Reserved1 = 0;
pReq->ChainOffset = 0;
pReq->Function = MPI_FUNCTION_RAID_ACTION;
- pReq->VolumeID = disk;
- pReq->VolumeBus = 0;
+ pReq->VolumeID = id;
+ pReq->VolumeBus = channel;
pReq->PhysDiskNum = 0;
pReq->MsgFlags = 0;
pReq->Reserved2 = 0;
@@ -263,8 +638,8 @@ mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, int disk)
mpt_add_sge((char *)&pReq->ActionDataSGE,
MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
- ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action %x id %d\n",
- hd->ioc->name, action, io->id));
+ ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action=%x channel=%d id=%d\n",
+ hd->ioc->name, pReq->Action, channel, id));
hd->pLocal = NULL;
hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
@@ -292,12 +667,12 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
/* no DV on RAID devices */
if (sdev->channel == 0 &&
- (hd->ioc->raid_data.isRaid & (1 << sdev->id)))
+ mptspi_is_raid(hd, sdev->id))
return;
/* If this is a piece of a RAID, then quiesce first */
if (sdev->channel == 1 &&
- mptscsih_quiesce_raid(hd, 1, vtarget->target_id) < 0) {
+ mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) {
starget_printk(KERN_ERR, scsi_target(sdev),
"Integrated RAID quiesce failed\n");
return;
@@ -306,7 +681,7 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
spi_dv_device(sdev);
if (sdev->channel == 1 &&
- mptscsih_quiesce_raid(hd, 0, vtarget->target_id) < 0)
+ mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
starget_printk(KERN_ERR, scsi_target(sdev),
"Integrated RAID resume failed\n");
@@ -317,54 +692,89 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
static int mptspi_slave_alloc(struct scsi_device *sdev)
{
- int ret;
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
- /* gcc doesn't see that all uses of this variable occur within
- * the if() statements, so stop it from whining */
- int physdisknum = 0;
-
- if (sdev->channel == 1) {
- physdisknum = mptscsih_raid_id_to_num(hd, sdev->id);
+ VirtTarget *vtarget;
+ VirtDevice *vdev;
+ struct scsi_target *starget;
- if (physdisknum < 0)
- return physdisknum;
+ if (sdev->channel == 1 &&
+ mptscsih_is_phys_disk(hd->ioc, 0, sdev->id) == 0)
+ return -ENXIO;
+
+ vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
+ if (!vdev) {
+ printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
+ hd->ioc->name, sizeof(VirtDevice));
+ return -ENOMEM;
}
- ret = mptscsih_slave_alloc(sdev);
+ vdev->lun = sdev->lun;
+ sdev->hostdata = vdev;
- if (ret)
- return ret;
+ starget = scsi_target(sdev);
+ vtarget = starget->hostdata;
+ vdev->vtarget = vtarget;
+ vtarget->num_luns++;
- if (sdev->channel == 1) {
- VirtDevice *vdev = sdev->hostdata;
+ if (sdev->channel == 1)
sdev->no_uld_attach = 1;
- vdev->vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
- /* The real channel for this device is zero */
- vdev->vtarget->bus_id = 0;
- /* The actual physdisknum (for RAID passthrough) */
- vdev->vtarget->target_id = physdisknum;
- }
return 0;
}
static int mptspi_slave_configure(struct scsi_device *sdev)
{
- int ret = mptscsih_slave_configure(sdev);
struct _MPT_SCSI_HOST *hd =
(struct _MPT_SCSI_HOST *)sdev->host->hostdata;
+ VirtTarget *vtarget = scsi_target(sdev)->hostdata;
+ int ret = mptscsih_slave_configure(sdev);
if (ret)
return ret;
+ mptspi_initTarget(hd, vtarget, sdev);
+
+ ddvprintk((MYIOC_s_INFO_FMT "id=%d min_period=0x%02x"
+ " max_offset=0x%02x max_width=%d\n", hd->ioc->name,
+ sdev->id, spi_min_period(scsi_target(sdev)),
+ spi_max_offset(scsi_target(sdev)),
+ spi_max_width(scsi_target(sdev))));
+
if ((sdev->channel == 1 ||
- !(hd->ioc->raid_data.isRaid & (1 << sdev->id))) &&
+ !(mptspi_is_raid(hd, sdev->id))) &&
!spi_initial_dv(sdev->sdev_target))
mptspi_dv_device(hd, sdev);
return 0;
}
+static int
+mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+{
+ struct _MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata;
+ VirtDevice *vdev = SCpnt->device->hostdata;
+
+ if (!vdev || !vdev->vtarget) {
+ SCpnt->result = DID_NO_CONNECT << 16;
+ done(SCpnt);
+ return 0;
+ }
+
+ if (SCpnt->device->channel == 1 &&
+ mptscsih_is_phys_disk(hd->ioc, 0, SCpnt->device->id) == 0) {
+ SCpnt->result = DID_NO_CONNECT << 16;
+ done(SCpnt);
+ return 0;
+ }
+
+#ifdef MPT_DEBUG_DV
+ if (spi_dv_pending(scsi_target(SCpnt->device)))
+ scsi_print_command(SCpnt);
+#endif
+
+ return mptscsih_qcmd(SCpnt,done);
+}
+
static void mptspi_slave_destroy(struct scsi_device *sdev)
{
struct scsi_target *starget = scsi_target(sdev);
@@ -392,11 +802,11 @@ static struct scsi_host_template mptspi_driver_template = {
.proc_info = mptscsih_proc_info,
.name = "MPT SPI Host",
.info = mptscsih_info,
- .queuecommand = mptscsih_qcmd,
+ .queuecommand = mptspi_qcmd,
.target_alloc = mptspi_target_alloc,
.slave_alloc = mptspi_slave_alloc,
.slave_configure = mptspi_slave_configure,
- .target_destroy = mptscsih_target_destroy,
+ .target_destroy = mptspi_target_destroy,
.slave_destroy = mptspi_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
@@ -427,7 +837,7 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
/* don't allow updating nego parameters on RAID devices */
if (starget->channel == 0 &&
- (hd->ioc->raid_data.isRaid & (1 << starget->id)))
+ mptspi_is_raid(hd, starget->id))
return -1;
size = ioc->spi_data.sdp1length * 4;
@@ -460,6 +870,8 @@ static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
pg1->Header.PageNumber = hdr.PageNumber;
pg1->Header.PageType = hdr.PageType;
+ mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters));
+
if (mpt_config(ioc, &cfg)) {
starget_printk(KERN_ERR, starget, "mpt_config failed\n");
goto out_free;
@@ -672,9 +1084,9 @@ static void mpt_work_wrapper(struct work_struct *work)
if (sdev->channel != 1)
continue;
- /* The target_id is the raid PhysDiskNum, even if
+ /* The id is the raid PhysDiskNum, even if
* starget->id is the actual target address */
- if(vtarget->target_id != disk)
+ if(vtarget->id != disk)
continue;
starget_printk(KERN_INFO, vtarget->starget,
@@ -727,7 +1139,7 @@ mptspi_deny_binding(struct scsi_target *starget)
{
struct _MPT_SCSI_HOST *hd =
(struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata;
- return ((hd->ioc->raid_data.isRaid & (1 << starget->id)) &&
+ return ((mptspi_is_raid(hd, starget->id)) &&
starget->channel == 0) ? 1 : 0;
}
@@ -945,14 +1357,13 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
* max_lun = 1 + actual last lun,
* see hosts.h :o(
*/
- sh->max_id = MPT_MAX_SCSI_DEVICES;
+ sh->max_id = ioc->devices_per_bus;
sh->max_lun = MPT_LAST_LUN + 1;
/*
* If RAID Firmware Detected, setup virtual channel
*/
- if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
- > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
+ if (ioc->ir_firmware)
sh->max_channel = 1;
else
sh->max_channel = 0;
@@ -1009,20 +1420,6 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n",
ioc->name, hd->ScsiLookup));
- /* Allocate memory for the device structures.
- * A non-Null pointer at an offset
- * indicates a device exists.
- * max_id = 1 + maximum id (hosts.h)
- */
- hd->Targets = kcalloc(sh->max_id * (sh->max_channel + 1),
- sizeof(void *), GFP_ATOMIC);
- if (!hd->Targets) {
- error = -ENOMEM;
- goto out_mptspi_probe;
- }
-
- dprintk((KERN_INFO " vdev @ %p\n", hd->Targets));
-
/* Clear the TM flags
*/
hd->tmPending = 0;
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 88642dec080..421da1e7c0e 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -838,32 +838,28 @@ zfcp_erp_action_exists(struct zfcp_erp_action *erp_action)
* and does appropriate preparations (dismiss fsf request, ...)
*
* locks: called under erp_lock (disabled interrupts)
- *
- * returns: 0
*/
-static int
+static void
zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action)
{
- int retval = 0;
- struct zfcp_fsf_req *fsf_req = NULL;
struct zfcp_adapter *adapter = erp_action->adapter;
if (erp_action->fsf_req) {
/* take lock to ensure that request is not deleted meanwhile */
spin_lock(&adapter->req_list_lock);
- if ((!zfcp_reqlist_ismember(adapter,
- erp_action->fsf_req->req_id)) &&
- (fsf_req->erp_action == erp_action)) {
+ if (zfcp_reqlist_ismember(adapter,
+ erp_action->fsf_req->req_id)) {
/* fsf_req still exists */
debug_text_event(adapter->erp_dbf, 3, "a_ca_req");
- debug_event(adapter->erp_dbf, 3, &fsf_req,
+ debug_event(adapter->erp_dbf, 3, &erp_action->fsf_req,
sizeof (unsigned long));
/* dismiss fsf_req of timed out/dismissed erp_action */
if (erp_action->status & (ZFCP_STATUS_ERP_DISMISSED |
ZFCP_STATUS_ERP_TIMEDOUT)) {
debug_text_event(adapter->erp_dbf, 3,
"a_ca_disreq");
- fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED;
+ erp_action->fsf_req->status |=
+ ZFCP_STATUS_FSFREQ_DISMISSED;
}
if (erp_action->status & ZFCP_STATUS_ERP_TIMEDOUT) {
ZFCP_LOG_NORMAL("error: erp step timed out "
@@ -876,11 +872,11 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action)
* then keep it running asynchronously and don't mess
* with the association of erp_action and fsf_req.
*/
- if (fsf_req->status & (ZFCP_STATUS_FSFREQ_COMPLETED |
+ if (erp_action->fsf_req->status &
+ (ZFCP_STATUS_FSFREQ_COMPLETED |
ZFCP_STATUS_FSFREQ_DISMISSED)) {
/* forget about association between fsf_req
and erp_action */
- fsf_req->erp_action = NULL;
erp_action->fsf_req = NULL;
}
} else {
@@ -894,8 +890,6 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action)
spin_unlock(&adapter->req_list_lock);
} else
debug_text_event(adapter->erp_dbf, 3, "a_ca_noreq");
-
- return retval;
}
/**
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index cda0cc095ad..01386ac688a 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -89,7 +89,7 @@ extern int zfcp_fsf_control_file(struct zfcp_adapter *, struct zfcp_fsf_req **,
u32, u32, struct zfcp_sg_list *);
extern void zfcp_fsf_start_timer(struct zfcp_fsf_req *, unsigned long);
extern void zfcp_erp_start_timer(struct zfcp_fsf_req *);
-extern int zfcp_fsf_req_dismiss_all(struct zfcp_adapter *);
+extern void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *);
extern int zfcp_fsf_status_read(struct zfcp_adapter *, int);
extern int zfcp_fsf_req_create(struct zfcp_adapter *, u32, int, mempool_t *,
unsigned long *, struct zfcp_fsf_req **);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 4b3ae3f22e7..ef16f7ca4bb 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -176,28 +176,25 @@ static void zfcp_fsf_req_dismiss(struct zfcp_adapter *adapter,
/**
* zfcp_fsf_req_dismiss_all - dismiss all remaining fsf requests
*/
-int zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter)
+void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter)
{
struct zfcp_fsf_req *request, *tmp;
unsigned long flags;
+ LIST_HEAD(remove_queue);
unsigned int i, counter;
spin_lock_irqsave(&adapter->req_list_lock, flags);
atomic_set(&adapter->reqs_active, 0);
- for (i=0; i<REQUEST_LIST_SIZE; i++) {
- if (list_empty(&adapter->req_list[i]))
- continue;
-
- counter = 0;
- list_for_each_entry_safe(request, tmp,
- &adapter->req_list[i], list) {
- zfcp_fsf_req_dismiss(adapter, request, counter);
- counter++;
- }
- }
+ for (i=0; i<REQUEST_LIST_SIZE; i++)
+ list_splice_init(&adapter->req_list[i], &remove_queue);
+
spin_unlock_irqrestore(&adapter->req_list_lock, flags);
- return 0;
+ counter = 0;
+ list_for_each_entry_safe(request, tmp, &remove_queue, list) {
+ zfcp_fsf_req_dismiss(adapter, request, counter);
+ counter++;
+ }
}
/*
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 68103e508db..88e061d13d0 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -667,12 +667,30 @@ NCR_700_chip_setup(struct Scsi_Host *host)
__u8 min_xferp = (hostdata->chip710 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
if(hostdata->chip710) {
- __u8 burst_disable = hostdata->burst_disable
- ? BURST_DISABLE : 0;
+ __u8 burst_disable = 0;
+ __u8 burst_length = 0;
+
+ switch (hostdata->burst_length) {
+ case 1:
+ burst_length = BURST_LENGTH_1;
+ break;
+ case 2:
+ burst_length = BURST_LENGTH_2;
+ break;
+ case 4:
+ burst_length = BURST_LENGTH_4;
+ break;
+ case 8:
+ burst_length = BURST_LENGTH_8;
+ break;
+ default:
+ burst_disable = BURST_DISABLE;
+ break;
+ }
dcntl_extra = COMPAT_700_MODE;
NCR_700_writeb(dcntl_extra, host, DCNTL_REG);
- NCR_700_writeb(BURST_LENGTH_8 | hostdata->dmode_extra,
+ NCR_700_writeb(burst_length | hostdata->dmode_extra,
host, DMODE_710_REG);
NCR_700_writeb(burst_disable | (hostdata->differential ?
DIFF : 0), host, CTEST7_REG);
diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h
index f38822db421..841e1bb27d5 100644
--- a/drivers/scsi/53c700.h
+++ b/drivers/scsi/53c700.h
@@ -203,7 +203,7 @@ struct NCR_700_Host_Parameters {
__u32 force_le_on_be:1;
#endif
__u32 chip710:1; /* set if really a 710 not 700 */
- __u32 burst_disable:1; /* set to 1 to disable 710 bursting */
+ __u32 burst_length:4; /* set to 0 to disable 710 bursting */
/* NOTHING BELOW HERE NEEDS ALTERING */
__u32 fast:1; /* if we can alter the SCSI bus clock
diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
index 9c379431087..93b41f45638 100644
--- a/drivers/scsi/53c7xx.c
+++ b/drivers/scsi/53c7xx.c
@@ -4399,7 +4399,7 @@ abort_connected (struct Scsi_Host *host) {
* account the current synchronous offset)
*/
- sstat = (NCR53c8x0_read8 (SSTAT2_REG);
+ sstat = NCR53c8x0_read8 (SSTAT2_REG);
offset = OFFSET (sstat & SSTAT2_FF_MASK) >> SSTAT2_FF_SHIFT;
phase = sstat & SSTAT2_PHASE_MASK;
@@ -5422,7 +5422,7 @@ insn_to_offset (Scsi_Cmnd *cmd, u32 *insn) {
--buffers, offset += segment->length, ++segment)
#if 0
printk("scsi%d: comparing 0x%p to 0x%p\n",
- cmd->device->host->host_no, saved, page_address(segment->page+segment->offset);
+ cmd->device->host->host_no, saved, page_address(segment->page+segment->offset));
#else
;
#endif
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 3075204915c..e874b894487 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -192,7 +192,7 @@ static void BusLogic_InitializeCCBs(struct BusLogic_HostAdapter *HostAdapter, vo
BusLogic_CreateInitialCCBs allocates the initial CCBs for Host Adapter.
*/
-static boolean __init BusLogic_CreateInitialCCBs(struct BusLogic_HostAdapter *HostAdapter)
+static bool __init BusLogic_CreateInitialCCBs(struct BusLogic_HostAdapter *HostAdapter)
{
int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB);
void *BlockPointer;
@@ -238,7 +238,7 @@ static void BusLogic_DestroyCCBs(struct BusLogic_HostAdapter *HostAdapter)
multiple host adapters share the same IRQ Channel.
*/
-static void BusLogic_CreateAdditionalCCBs(struct BusLogic_HostAdapter *HostAdapter, int AdditionalCCBs, boolean SuccessMessageP)
+static void BusLogic_CreateAdditionalCCBs(struct BusLogic_HostAdapter *HostAdapter, int AdditionalCCBs, bool SuccessMessageP)
{
int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB);
int PreviouslyAllocated = HostAdapter->AllocatedCCBs;
@@ -362,10 +362,8 @@ static int BusLogic_Command(struct BusLogic_HostAdapter *HostAdapter, enum BusLo
interrupt could occur if the IRQ Channel was previously enabled by another
BusLogic Host Adapter or another driver sharing the same IRQ Channel.
*/
- if (!HostAdapter->IRQ_ChannelAcquired) {
+ if (!HostAdapter->IRQ_ChannelAcquired)
local_irq_save(ProcessorFlags);
- local_irq_disable();
- }
/*
Wait for the Host Adapter Ready bit to be set and the Command/Parameter
Register Busy bit to be reset in the Status Register.
@@ -639,9 +637,9 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
struct BusLogic_ProbeInfo *PrimaryProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount];
int NonPrimaryPCIMultiMasterIndex = BusLogic_ProbeInfoCount + 1;
int NonPrimaryPCIMultiMasterCount = 0, PCIMultiMasterCount = 0;
- boolean ForceBusDeviceScanningOrder = false;
- boolean ForceBusDeviceScanningOrderChecked = false;
- boolean StandardAddressSeen[6];
+ bool ForceBusDeviceScanningOrder = false;
+ bool ForceBusDeviceScanningOrderChecked = false;
+ bool StandardAddressSeen[6];
struct pci_dev *PCI_Device = NULL;
int i;
if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters)
@@ -1011,7 +1009,7 @@ static void __init BusLogic_InitializeProbeInfoList(struct BusLogic_HostAdapter
BusLogic_Failure prints a standardized error message, and then returns false.
*/
-static boolean BusLogic_Failure(struct BusLogic_HostAdapter *HostAdapter, char *ErrorMessage)
+static bool BusLogic_Failure(struct BusLogic_HostAdapter *HostAdapter, char *ErrorMessage)
{
BusLogic_AnnounceDriver(HostAdapter);
if (HostAdapter->HostAdapterBusType == BusLogic_PCI_Bus) {
@@ -1030,7 +1028,7 @@ static boolean BusLogic_Failure(struct BusLogic_HostAdapter *HostAdapter, char *
BusLogic_ProbeHostAdapter probes for a BusLogic Host Adapter.
*/
-static boolean __init BusLogic_ProbeHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
+static bool __init BusLogic_ProbeHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
{
union BusLogic_StatusRegister StatusRegister;
union BusLogic_InterruptRegister InterruptRegister;
@@ -1101,8 +1099,8 @@ static boolean __init BusLogic_ProbeHostAdapter(struct BusLogic_HostAdapter *Hos
SCSI Bus Reset.
*/
-static boolean BusLogic_HardwareResetHostAdapter(struct BusLogic_HostAdapter
- *HostAdapter, boolean HardReset)
+static bool BusLogic_HardwareResetHostAdapter(struct BusLogic_HostAdapter
+ *HostAdapter, bool HardReset)
{
union BusLogic_StatusRegister StatusRegister;
int TimeoutCounter;
@@ -1205,11 +1203,11 @@ static boolean BusLogic_HardwareResetHostAdapter(struct BusLogic_HostAdapter
Host Adapter.
*/
-static boolean __init BusLogic_CheckHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
+static bool __init BusLogic_CheckHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
{
struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation;
unsigned char RequestedReplyLength;
- boolean Result = true;
+ bool Result = true;
/*
FlashPoint Host Adapters do not require this protection.
*/
@@ -1239,7 +1237,7 @@ static boolean __init BusLogic_CheckHostAdapter(struct BusLogic_HostAdapter *Hos
from Host Adapter and initializes the Host Adapter structure.
*/
-static boolean __init BusLogic_ReadHostAdapterConfiguration(struct BusLogic_HostAdapter
+static bool __init BusLogic_ReadHostAdapterConfiguration(struct BusLogic_HostAdapter
*HostAdapter)
{
struct BusLogic_BoardID BoardID;
@@ -1686,14 +1684,14 @@ static boolean __init BusLogic_ReadHostAdapterConfiguration(struct BusLogic_Host
Host Adapter.
*/
-static boolean __init BusLogic_ReportHostAdapterConfiguration(struct BusLogic_HostAdapter
+static bool __init BusLogic_ReportHostAdapterConfiguration(struct BusLogic_HostAdapter
*HostAdapter)
{
unsigned short AllTargetsMask = (1 << HostAdapter->MaxTargetDevices) - 1;
unsigned short SynchronousPermitted, FastPermitted;
unsigned short UltraPermitted, WidePermitted;
unsigned short DisconnectPermitted, TaggedQueuingPermitted;
- boolean CommonSynchronousNegotiation, CommonTaggedQueueDepth;
+ bool CommonSynchronousNegotiation, CommonTaggedQueueDepth;
char SynchronousString[BusLogic_MaxTargetDevices + 1];
char WideString[BusLogic_MaxTargetDevices + 1];
char DisconnectString[BusLogic_MaxTargetDevices + 1];
@@ -1835,7 +1833,7 @@ static boolean __init BusLogic_ReportHostAdapterConfiguration(struct BusLogic_Ho
Host Adapter.
*/
-static boolean __init BusLogic_AcquireResources(struct BusLogic_HostAdapter *HostAdapter)
+static bool __init BusLogic_AcquireResources(struct BusLogic_HostAdapter *HostAdapter)
{
if (HostAdapter->IRQ_Channel == 0) {
BusLogic_Error("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n", HostAdapter);
@@ -1903,7 +1901,7 @@ static void BusLogic_ReleaseResources(struct BusLogic_HostAdapter *HostAdapter)
of the Host Adapter from its initial power on or hard reset state.
*/
-static boolean BusLogic_InitializeHostAdapter(struct BusLogic_HostAdapter
+static bool BusLogic_InitializeHostAdapter(struct BusLogic_HostAdapter
*HostAdapter)
{
struct BusLogic_ExtendedMailboxRequest ExtendedMailboxRequest;
@@ -2002,7 +2000,7 @@ static boolean BusLogic_InitializeHostAdapter(struct BusLogic_HostAdapter
through Host Adapter.
*/
-static boolean __init BusLogic_TargetDeviceInquiry(struct BusLogic_HostAdapter
+static bool __init BusLogic_TargetDeviceInquiry(struct BusLogic_HostAdapter
*HostAdapter)
{
u16 InstalledDevices;
@@ -2739,7 +2737,7 @@ static irqreturn_t BusLogic_InterruptHandler(int IRQ_Channel, void *DeviceIdenti
already have been acquired by the caller.
*/
-static boolean BusLogic_WriteOutgoingMailbox(struct BusLogic_HostAdapter
+static bool BusLogic_WriteOutgoingMailbox(struct BusLogic_HostAdapter
*HostAdapter, enum BusLogic_ActionCode ActionCode, struct BusLogic_CCB *CCB)
{
struct BusLogic_OutgoingMailbox *NextOutgoingMailbox;
@@ -3058,7 +3056,7 @@ static int BusLogic_AbortCommand(struct scsi_cmnd *Command)
currently executing SCSI Commands as having been Reset.
*/
-static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *HostAdapter, boolean HardReset)
+static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *HostAdapter, bool HardReset)
{
struct BusLogic_CCB *CCB;
int TargetID;
@@ -3309,7 +3307,7 @@ Target Requested Completed Requested Completed Requested Completed\n\
static void BusLogic_Message(enum BusLogic_MessageLevel MessageLevel, char *Format, struct BusLogic_HostAdapter *HostAdapter, ...)
{
static char Buffer[BusLogic_LineBufferSize];
- static boolean BeginningOfLine = true;
+ static bool BeginningOfLine = true;
va_list Arguments;
int Length = 0;
va_start(Arguments, HostAdapter);
@@ -3347,7 +3345,7 @@ static void BusLogic_Message(enum BusLogic_MessageLevel MessageLevel, char *Form
and updates the pointer if the keyword is recognized and false otherwise.
*/
-static boolean __init BusLogic_ParseKeyword(char **StringPointer, char *Keyword)
+static bool __init BusLogic_ParseKeyword(char **StringPointer, char *Keyword)
{
char *Pointer = *StringPointer;
while (*Keyword != '\0') {
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index cca6d45eee4..bfbfb5c3a8f 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -234,12 +234,6 @@ enum BusLogic_BIOS_DiskGeometryTranslation {
/*
- Define a Boolean data type.
-*/
-
-typedef bool boolean;
-
-/*
Define a 10^18 Statistics Byte Counter data type.
*/
@@ -269,19 +263,19 @@ struct BusLogic_ProbeInfo {
*/
struct BusLogic_ProbeOptions {
- boolean NoProbe:1; /* Bit 0 */
- boolean NoProbeISA:1; /* Bit 1 */
- boolean NoProbePCI:1; /* Bit 2 */
- boolean NoSortPCI:1; /* Bit 3 */
- boolean MultiMasterFirst:1; /* Bit 4 */
- boolean FlashPointFirst:1; /* Bit 5 */
- boolean LimitedProbeISA:1; /* Bit 6 */
- boolean Probe330:1; /* Bit 7 */
- boolean Probe334:1; /* Bit 8 */
- boolean Probe230:1; /* Bit 9 */
- boolean Probe234:1; /* Bit 10 */
- boolean Probe130:1; /* Bit 11 */
- boolean Probe134:1; /* Bit 12 */
+ bool NoProbe:1; /* Bit 0 */
+ bool NoProbeISA:1; /* Bit 1 */
+ bool NoProbePCI:1; /* Bit 2 */
+ bool NoSortPCI:1; /* Bit 3 */
+ bool MultiMasterFirst:1;/* Bit 4 */
+ bool FlashPointFirst:1; /* Bit 5 */
+ bool LimitedProbeISA:1; /* Bit 6 */
+ bool Probe330:1; /* Bit 7 */
+ bool Probe334:1; /* Bit 8 */
+ bool Probe230:1; /* Bit 9 */
+ bool Probe234:1; /* Bit 10 */
+ bool Probe130:1; /* Bit 11 */
+ bool Probe134:1; /* Bit 12 */
};
/*
@@ -289,10 +283,10 @@ struct BusLogic_ProbeOptions {
*/
struct BusLogic_GlobalOptions {
- boolean TraceProbe:1; /* Bit 0 */
- boolean TraceHardwareReset:1; /* Bit 1 */
- boolean TraceConfiguration:1; /* Bit 2 */
- boolean TraceErrors:1; /* Bit 3 */
+ bool TraceProbe:1; /* Bit 0 */
+ bool TraceHardwareReset:1; /* Bit 1 */
+ bool TraceConfiguration:1; /* Bit 2 */
+ bool TraceErrors:1; /* Bit 3 */
};
/*
@@ -300,7 +294,7 @@ struct BusLogic_GlobalOptions {
*/
struct BusLogic_LocalOptions {
- boolean InhibitTargetInquiry:1; /* Bit 0 */
+ bool InhibitTargetInquiry:1; /* Bit 0 */
};
/*
@@ -322,10 +316,10 @@ union BusLogic_ControlRegister {
unsigned char All;
struct {
unsigned char:4; /* Bits 0-3 */
- boolean SCSIBusReset:1; /* Bit 4 */
- boolean InterruptReset:1; /* Bit 5 */
- boolean SoftReset:1; /* Bit 6 */
- boolean HardReset:1; /* Bit 7 */
+ bool SCSIBusReset:1; /* Bit 4 */
+ bool InterruptReset:1; /* Bit 5 */
+ bool SoftReset:1; /* Bit 6 */
+ bool HardReset:1; /* Bit 7 */
} cr;
};
@@ -336,14 +330,14 @@ union BusLogic_ControlRegister {
union BusLogic_StatusRegister {
unsigned char All;
struct {
- boolean CommandInvalid:1; /* Bit 0 */
- boolean Reserved:1; /* Bit 1 */
- boolean DataInRegisterReady:1; /* Bit 2 */
- boolean CommandParameterRegisterBusy:1; /* Bit 3 */
- boolean HostAdapterReady:1; /* Bit 4 */
- boolean InitializationRequired:1; /* Bit 5 */
- boolean DiagnosticFailure:1; /* Bit 6 */
- boolean DiagnosticActive:1; /* Bit 7 */
+ bool CommandInvalid:1; /* Bit 0 */
+ bool Reserved:1; /* Bit 1 */
+ bool DataInRegisterReady:1; /* Bit 2 */
+ bool CommandParameterRegisterBusy:1; /* Bit 3 */
+ bool HostAdapterReady:1; /* Bit 4 */
+ bool InitializationRequired:1; /* Bit 5 */
+ bool DiagnosticFailure:1; /* Bit 6 */
+ bool DiagnosticActive:1; /* Bit 7 */
} sr;
};
@@ -354,12 +348,12 @@ union BusLogic_StatusRegister {
union BusLogic_InterruptRegister {
unsigned char All;
struct {
- boolean IncomingMailboxLoaded:1; /* Bit 0 */
- boolean OutgoingMailboxAvailable:1; /* Bit 1 */
- boolean CommandComplete:1; /* Bit 2 */
- boolean ExternalBusReset:1; /* Bit 3 */
+ bool IncomingMailboxLoaded:1; /* Bit 0 */
+ bool OutgoingMailboxAvailable:1;/* Bit 1 */
+ bool CommandComplete:1; /* Bit 2 */
+ bool ExternalBusReset:1; /* Bit 3 */
unsigned char Reserved:3; /* Bits 4-6 */
- boolean InterruptValid:1; /* Bit 7 */
+ bool InterruptValid:1; /* Bit 7 */
} ir;
};
@@ -373,7 +367,7 @@ union BusLogic_GeometryRegister {
enum BusLogic_BIOS_DiskGeometryTranslation Drive0Geometry:2; /* Bits 0-1 */
enum BusLogic_BIOS_DiskGeometryTranslation Drive1Geometry:2; /* Bits 2-3 */
unsigned char:3; /* Bits 4-6 */
- boolean ExtendedTranslationEnabled:1; /* Bit 7 */
+ bool ExtendedTranslationEnabled:1; /* Bit 7 */
} gr;
};
@@ -445,16 +439,16 @@ struct BusLogic_BoardID {
struct BusLogic_Configuration {
unsigned char:5; /* Byte 0 Bits 0-4 */
- boolean DMA_Channel5:1; /* Byte 0 Bit 5 */
- boolean DMA_Channel6:1; /* Byte 0 Bit 6 */
- boolean DMA_Channel7:1; /* Byte 0 Bit 7 */
- boolean IRQ_Channel9:1; /* Byte 1 Bit 0 */
- boolean IRQ_Channel10:1; /* Byte 1 Bit 1 */
- boolean IRQ_Channel11:1; /* Byte 1 Bit 2 */
- boolean IRQ_Channel12:1; /* Byte 1 Bit 3 */
+ bool DMA_Channel5:1; /* Byte 0 Bit 5 */
+ bool DMA_Channel6:1; /* Byte 0 Bit 6 */
+ bool DMA_Channel7:1; /* Byte 0 Bit 7 */
+ bool IRQ_Channel9:1; /* Byte 1 Bit 0 */
+ bool IRQ_Channel10:1; /* Byte 1 Bit 1 */
+ bool IRQ_Channel11:1; /* Byte 1 Bit 2 */
+ bool IRQ_Channel12:1; /* Byte 1 Bit 3 */
unsigned char:1; /* Byte 1 Bit 4 */
- boolean IRQ_Channel14:1; /* Byte 1 Bit 5 */
- boolean IRQ_Channel15:1; /* Byte 1 Bit 6 */
+ bool IRQ_Channel14:1; /* Byte 1 Bit 5 */
+ bool IRQ_Channel15:1; /* Byte 1 Bit 6 */
unsigned char:1; /* Byte 1 Bit 7 */
unsigned char HostAdapterID:4; /* Byte 2 Bits 0-3 */
unsigned char:4; /* Byte 2 Bits 4-7 */
@@ -467,12 +461,12 @@ struct BusLogic_Configuration {
struct BusLogic_SynchronousValue {
unsigned char Offset:4; /* Bits 0-3 */
unsigned char TransferPeriod:3; /* Bits 4-6 */
- boolean Synchronous:1; /* Bit 7 */
+ bool Synchronous:1; /* Bit 7 */
};
struct BusLogic_SetupInformation {
- boolean SynchronousInitiationEnabled:1; /* Byte 0 Bit 0 */
- boolean ParityCheckingEnabled:1; /* Byte 0 Bit 1 */
+ bool SynchronousInitiationEnabled:1; /* Byte 0 Bit 0 */
+ bool ParityCheckingEnabled:1; /* Byte 0 Bit 1 */
unsigned char:6; /* Byte 0 Bits 2-7 */
unsigned char BusTransferRate; /* Byte 1 */
unsigned char PreemptTimeOnBus; /* Byte 2 */
@@ -523,13 +517,13 @@ enum BusLogic_ISACompatibleIOPort {
struct BusLogic_PCIHostAdapterInformation {
enum BusLogic_ISACompatibleIOPort ISACompatibleIOPort; /* Byte 0 */
unsigned char PCIAssignedIRQChannel; /* Byte 1 */
- boolean LowByteTerminated:1; /* Byte 2 Bit 0 */
- boolean HighByteTerminated:1; /* Byte 2 Bit 1 */
+ bool LowByteTerminated:1; /* Byte 2 Bit 0 */
+ bool HighByteTerminated:1; /* Byte 2 Bit 1 */
unsigned char:2; /* Byte 2 Bits 2-3 */
- boolean JP1:1; /* Byte 2 Bit 4 */
- boolean JP2:1; /* Byte 2 Bit 5 */
- boolean JP3:1; /* Byte 2 Bit 6 */
- boolean GenericInfoValid:1; /* Byte 2 Bit 7 */
+ bool JP1:1; /* Byte 2 Bit 4 */
+ bool JP2:1; /* Byte 2 Bit 5 */
+ bool JP3:1; /* Byte 2 Bit 6 */
+ bool GenericInfoValid:1;/* Byte 2 Bit 7 */
unsigned char:8; /* Byte 3 */
};
@@ -545,17 +539,17 @@ struct BusLogic_ExtendedSetupInformation {
u32 BaseMailboxAddress; /* Bytes 5-8 */
struct {
unsigned char:2; /* Byte 9 Bits 0-1 */
- boolean FastOnEISA:1; /* Byte 9 Bit 2 */
+ bool FastOnEISA:1; /* Byte 9 Bit 2 */
unsigned char:3; /* Byte 9 Bits 3-5 */
- boolean LevelSensitiveInterrupt:1; /* Byte 9 Bit 6 */
+ bool LevelSensitiveInterrupt:1; /* Byte 9 Bit 6 */
unsigned char:1; /* Byte 9 Bit 7 */
} Misc;
unsigned char FirmwareRevision[3]; /* Bytes 10-12 */
- boolean HostWideSCSI:1; /* Byte 13 Bit 0 */
- boolean HostDifferentialSCSI:1; /* Byte 13 Bit 1 */
- boolean HostSupportsSCAM:1; /* Byte 13 Bit 2 */
- boolean HostUltraSCSI:1; /* Byte 13 Bit 3 */
- boolean HostSmartTermination:1; /* Byte 13 Bit 4 */
+ bool HostWideSCSI:1; /* Byte 13 Bit 0 */
+ bool HostDifferentialSCSI:1; /* Byte 13 Bit 1 */
+ bool HostSupportsSCAM:1; /* Byte 13 Bit 2 */
+ bool HostUltraSCSI:1; /* Byte 13 Bit 3 */
+ bool HostSmartTermination:1; /* Byte 13 Bit 4 */
unsigned char:3; /* Byte 13 Bits 5-7 */
} PACKED;
@@ -590,35 +584,35 @@ struct BusLogic_AutoSCSIData {
unsigned char InformationByteCount; /* Byte 2 */
unsigned char HostAdapterType[6]; /* Bytes 3-8 */
unsigned char:8; /* Byte 9 */
- boolean FloppyEnabled:1; /* Byte 10 Bit 0 */
- boolean FloppySecondary:1; /* Byte 10 Bit 1 */
- boolean LevelSensitiveInterrupt:1; /* Byte 10 Bit 2 */
+ bool FloppyEnabled:1; /* Byte 10 Bit 0 */
+ bool FloppySecondary:1; /* Byte 10 Bit 1 */
+ bool LevelSensitiveInterrupt:1; /* Byte 10 Bit 2 */
unsigned char:2; /* Byte 10 Bits 3-4 */
unsigned char SystemRAMAreaForBIOS:3; /* Byte 10 Bits 5-7 */
unsigned char DMA_Channel:7; /* Byte 11 Bits 0-6 */
- boolean DMA_AutoConfiguration:1; /* Byte 11 Bit 7 */
+ bool DMA_AutoConfiguration:1; /* Byte 11 Bit 7 */
unsigned char IRQ_Channel:7; /* Byte 12 Bits 0-6 */
- boolean IRQ_AutoConfiguration:1; /* Byte 12 Bit 7 */
+ bool IRQ_AutoConfiguration:1; /* Byte 12 Bit 7 */
unsigned char DMA_TransferRate; /* Byte 13 */
unsigned char SCSI_ID; /* Byte 14 */
- boolean LowByteTerminated:1; /* Byte 15 Bit 0 */
- boolean ParityCheckingEnabled:1; /* Byte 15 Bit 1 */
- boolean HighByteTerminated:1; /* Byte 15 Bit 2 */
- boolean NoisyCablingEnvironment:1; /* Byte 15 Bit 3 */
- boolean FastSynchronousNegotiation:1; /* Byte 15 Bit 4 */
- boolean BusResetEnabled:1; /* Byte 15 Bit 5 */
- boolean:1; /* Byte 15 Bit 6 */
- boolean ActiveNegationEnabled:1; /* Byte 15 Bit 7 */
+ bool LowByteTerminated:1; /* Byte 15 Bit 0 */
+ bool ParityCheckingEnabled:1; /* Byte 15 Bit 1 */
+ bool HighByteTerminated:1; /* Byte 15 Bit 2 */
+ bool NoisyCablingEnvironment:1; /* Byte 15 Bit 3 */
+ bool FastSynchronousNegotiation:1; /* Byte 15 Bit 4 */
+ bool BusResetEnabled:1; /* Byte 15 Bit 5 */
+ bool:1; /* Byte 15 Bit 6 */
+ bool ActiveNegationEnabled:1; /* Byte 15 Bit 7 */
unsigned char BusOnDelay; /* Byte 16 */
unsigned char BusOffDelay; /* Byte 17 */
- boolean HostAdapterBIOSEnabled:1; /* Byte 18 Bit 0 */
- boolean BIOSRedirectionOfINT19Enabled:1; /* Byte 18 Bit 1 */
- boolean ExtendedTranslationEnabled:1; /* Byte 18 Bit 2 */
- boolean MapRemovableAsFixedEnabled:1; /* Byte 18 Bit 3 */
- boolean:1; /* Byte 18 Bit 4 */
- boolean BIOSSupportsMoreThan2DrivesEnabled:1; /* Byte 18 Bit 5 */
- boolean BIOSInterruptModeEnabled:1; /* Byte 18 Bit 6 */
- boolean FlopticalSupportEnabled:1; /* Byte 19 Bit 7 */
+ bool HostAdapterBIOSEnabled:1; /* Byte 18 Bit 0 */
+ bool BIOSRedirectionOfINT19Enabled:1; /* Byte 18 Bit 1 */
+ bool ExtendedTranslationEnabled:1; /* Byte 18 Bit 2 */
+ bool MapRemovableAsFixedEnabled:1; /* Byte 18 Bit 3 */
+ bool:1; /* Byte 18 Bit 4 */
+ bool BIOSSupportsMoreThan2DrivesEnabled:1; /* Byte 18 Bit 5 */
+ bool BIOSInterruptModeEnabled:1; /* Byte 18 Bit 6 */
+ bool FlopticalSupportEnabled:1; /* Byte 19 Bit 7 */
unsigned short DeviceEnabled; /* Bytes 19-20 */
unsigned short WidePermitted; /* Bytes 21-22 */
unsigned short FastPermitted; /* Bytes 23-24 */
@@ -628,22 +622,22 @@ struct BusLogic_AutoSCSIData {
unsigned short IgnoreInBIOSScan; /* Bytes 31-32 */
unsigned char PCIInterruptPin:2; /* Byte 33 Bits 0-1 */
unsigned char HostAdapterIOPortAddress:2; /* Byte 33 Bits 2-3 */
- boolean StrictRoundRobinModeEnabled:1; /* Byte 33 Bit 4 */
- boolean VESABusSpeedGreaterThan33MHz:1; /* Byte 33 Bit 5 */
- boolean VESABurstWriteEnabled:1; /* Byte 33 Bit 6 */
- boolean VESABurstReadEnabled:1; /* Byte 33 Bit 7 */
+ bool StrictRoundRobinModeEnabled:1; /* Byte 33 Bit 4 */
+ bool VESABusSpeedGreaterThan33MHz:1; /* Byte 33 Bit 5 */
+ bool VESABurstWriteEnabled:1; /* Byte 33 Bit 6 */
+ bool VESABurstReadEnabled:1; /* Byte 33 Bit 7 */
unsigned short UltraPermitted; /* Bytes 34-35 */
unsigned int:32; /* Bytes 36-39 */
unsigned char:8; /* Byte 40 */
unsigned char AutoSCSIMaximumLUN; /* Byte 41 */
- boolean:1; /* Byte 42 Bit 0 */
- boolean SCAM_Dominant:1; /* Byte 42 Bit 1 */
- boolean SCAM_Enabled:1; /* Byte 42 Bit 2 */
- boolean SCAM_Level2:1; /* Byte 42 Bit 3 */
+ bool:1; /* Byte 42 Bit 0 */
+ bool SCAM_Dominant:1; /* Byte 42 Bit 1 */
+ bool SCAM_Enabled:1; /* Byte 42 Bit 2 */
+ bool SCAM_Level2:1; /* Byte 42 Bit 3 */
unsigned char:4; /* Byte 42 Bits 4-7 */
- boolean INT13ExtensionEnabled:1; /* Byte 43 Bit 0 */
- boolean:1; /* Byte 43 Bit 1 */
- boolean CDROMBootEnabled:1; /* Byte 43 Bit 2 */
+ bool INT13ExtensionEnabled:1; /* Byte 43 Bit 0 */
+ bool:1; /* Byte 43 Bit 1 */
+ bool CDROMBootEnabled:1; /* Byte 43 Bit 2 */
unsigned char:5; /* Byte 43 Bits 3-7 */
unsigned char BootTargetID:4; /* Byte 44 Bits 0-3 */
unsigned char BootChannel:4; /* Byte 44 Bits 4-7 */
@@ -852,7 +846,7 @@ struct BusLogic_CCB {
enum BusLogic_CCB_Opcode Opcode; /* Byte 0 */
unsigned char:3; /* Byte 1 Bits 0-2 */
enum BusLogic_DataDirection DataDirection:2; /* Byte 1 Bits 3-4 */
- boolean TagEnable:1; /* Byte 1 Bit 5 */
+ bool TagEnable:1; /* Byte 1 Bit 5 */
enum BusLogic_QueueTag QueueTag:2; /* Byte 1 Bits 6-7 */
unsigned char CDB_Length; /* Byte 2 */
unsigned char SenseDataLength; /* Byte 3 */
@@ -864,7 +858,7 @@ struct BusLogic_CCB {
enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 15 */
unsigned char TargetID; /* Byte 16 */
unsigned char LogicalUnit:5; /* Byte 17 Bits 0-4 */
- boolean LegacyTagEnable:1; /* Byte 17 Bit 5 */
+ bool LegacyTagEnable:1; /* Byte 17 Bit 5 */
enum BusLogic_QueueTag LegacyQueueTag:2; /* Byte 17 Bits 6-7 */
SCSI_CDB_T CDB; /* Bytes 18-29 */
unsigned char:8; /* Byte 30 */
@@ -939,13 +933,13 @@ struct BusLogic_DriverOptions {
*/
struct BusLogic_TargetFlags {
- boolean TargetExists:1;
- boolean TaggedQueuingSupported:1;
- boolean WideTransfersSupported:1;
- boolean TaggedQueuingActive:1;
- boolean WideTransfersActive:1;
- boolean CommandSuccessfulFlag:1;
- boolean TargetInfoReported:1;
+ bool TargetExists:1;
+ bool TaggedQueuingSupported:1;
+ bool WideTransfersSupported:1;
+ bool TaggedQueuingActive:1;
+ bool WideTransfersActive:1;
+ bool CommandSuccessfulFlag:1;
+ bool TargetInfoReported:1;
};
/*
@@ -992,7 +986,7 @@ typedef unsigned int FlashPoint_CardHandle_T;
struct FlashPoint_Info {
u32 BaseAddress; /* Bytes 0-3 */
- boolean Present; /* Byte 4 */
+ bool Present; /* Byte 4 */
unsigned char IRQ_Channel; /* Byte 5 */
unsigned char SCSI_ID; /* Byte 6 */
unsigned char SCSI_LUN; /* Byte 7 */
@@ -1002,15 +996,15 @@ struct FlashPoint_Info {
unsigned short UltraPermitted; /* Bytes 14-15 */
unsigned short DisconnectPermitted; /* Bytes 16-17 */
unsigned short WidePermitted; /* Bytes 18-19 */
- boolean ParityCheckingEnabled:1; /* Byte 20 Bit 0 */
- boolean HostWideSCSI:1; /* Byte 20 Bit 1 */
- boolean HostSoftReset:1; /* Byte 20 Bit 2 */
- boolean ExtendedTranslationEnabled:1; /* Byte 20 Bit 3 */
- boolean LowByteTerminated:1; /* Byte 20 Bit 4 */
- boolean HighByteTerminated:1; /* Byte 20 Bit 5 */
- boolean ReportDataUnderrun:1; /* Byte 20 Bit 6 */
- boolean SCAM_Enabled:1; /* Byte 20 Bit 7 */
- boolean SCAM_Level2:1; /* Byte 21 Bit 0 */
+ bool ParityCheckingEnabled:1; /* Byte 20 Bit 0 */
+ bool HostWideSCSI:1; /* Byte 20 Bit 1 */
+ bool HostSoftReset:1; /* Byte 20 Bit 2 */
+ bool ExtendedTranslationEnabled:1; /* Byte 20 Bit 3 */
+ bool LowByteTerminated:1; /* Byte 20 Bit 4 */
+ bool HighByteTerminated:1; /* Byte 20 Bit 5 */
+ bool ReportDataUnderrun:1; /* Byte 20 Bit 6 */
+ bool SCAM_Enabled:1; /* Byte 20 Bit 7 */
+ bool SCAM_Level2:1; /* Byte 21 Bit 0 */
unsigned char:7; /* Byte 21 Bits 1-7 */
unsigned char Family; /* Byte 22 */
unsigned char BusType; /* Byte 23 */
@@ -1044,29 +1038,29 @@ struct BusLogic_HostAdapter {
unsigned char IRQ_Channel;
unsigned char DMA_Channel;
unsigned char SCSI_ID;
- boolean IRQ_ChannelAcquired:1;
- boolean DMA_ChannelAcquired:1;
- boolean ExtendedTranslationEnabled:1;
- boolean ParityCheckingEnabled:1;
- boolean BusResetEnabled:1;
- boolean LevelSensitiveInterrupt:1;
- boolean HostWideSCSI:1;
- boolean HostDifferentialSCSI:1;
- boolean HostSupportsSCAM:1;
- boolean HostUltraSCSI:1;
- boolean ExtendedLUNSupport:1;
- boolean TerminationInfoValid:1;
- boolean LowByteTerminated:1;
- boolean HighByteTerminated:1;
- boolean BounceBuffersRequired:1;
- boolean StrictRoundRobinModeSupport:1;
- boolean SCAM_Enabled:1;
- boolean SCAM_Level2:1;
- boolean HostAdapterInitialized:1;
- boolean HostAdapterExternalReset:1;
- boolean HostAdapterInternalError:1;
- boolean ProcessCompletedCCBsActive;
- volatile boolean HostAdapterCommandCompleted;
+ bool IRQ_ChannelAcquired:1;
+ bool DMA_ChannelAcquired:1;
+ bool ExtendedTranslationEnabled:1;
+ bool ParityCheckingEnabled:1;
+ bool BusResetEnabled:1;
+ bool LevelSensitiveInterrupt:1;
+ bool HostWideSCSI:1;
+ bool HostDifferentialSCSI:1;
+ bool HostSupportsSCAM:1;
+ bool HostUltraSCSI:1;
+ bool ExtendedLUNSupport:1;
+ bool TerminationInfoValid:1;
+ bool LowByteTerminated:1;
+ bool HighByteTerminated:1;
+ bool BounceBuffersRequired:1;
+ bool StrictRoundRobinModeSupport:1;
+ bool SCAM_Enabled:1;
+ bool SCAM_Level2:1;
+ bool HostAdapterInitialized:1;
+ bool HostAdapterExternalReset:1;
+ bool HostAdapterInternalError:1;
+ bool ProcessCompletedCCBsActive;
+ volatile bool HostAdapterCommandCompleted;
unsigned short HostAdapterScatterGatherLimit;
unsigned short DriverScatterGatherLimit;
unsigned short MaxTargetDevices;
@@ -1141,25 +1135,25 @@ struct SCSI_Inquiry {
unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */
- boolean RMB:1; /* Byte 1 Bit 7 */
+ bool RMB:1; /* Byte 1 Bit 7 */
unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */
unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */
unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */
unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */
unsigned char:2; /* Byte 3 Bits 4-5 */
- boolean TrmIOP:1; /* Byte 3 Bit 6 */
- boolean AENC:1; /* Byte 3 Bit 7 */
+ bool TrmIOP:1; /* Byte 3 Bit 6 */
+ bool AENC:1; /* Byte 3 Bit 7 */
unsigned char AdditionalLength; /* Byte 4 */
unsigned char:8; /* Byte 5 */
unsigned char:8; /* Byte 6 */
- boolean SftRe:1; /* Byte 7 Bit 0 */
- boolean CmdQue:1; /* Byte 7 Bit 1 */
- boolean:1; /* Byte 7 Bit 2 */
- boolean Linked:1; /* Byte 7 Bit 3 */
- boolean Sync:1; /* Byte 7 Bit 4 */
- boolean WBus16:1; /* Byte 7 Bit 5 */
- boolean WBus32:1; /* Byte 7 Bit 6 */
- boolean RelAdr:1; /* Byte 7 Bit 7 */
+ bool SftRe:1; /* Byte 7 Bit 0 */
+ bool CmdQue:1; /* Byte 7 Bit 1 */
+ bool:1; /* Byte 7 Bit 2 */
+ bool Linked:1; /* Byte 7 Bit 3 */
+ bool Sync:1; /* Byte 7 Bit 4 */
+ bool WBus16:1; /* Byte 7 Bit 5 */
+ bool WBus32:1; /* Byte 7 Bit 6 */
+ bool RelAdr:1; /* Byte 7 Bit 7 */
unsigned char VendorIdentification[8]; /* Bytes 8-15 */
unsigned char ProductIdentification[16]; /* Bytes 16-31 */
unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */
@@ -1348,7 +1342,7 @@ static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *, char *, char **, off_t
static int BusLogic_SlaveConfigure(struct scsi_device *);
static void BusLogic_QueueCompletedCCB(struct BusLogic_CCB *);
static irqreturn_t BusLogic_InterruptHandler(int, void *);
-static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *, boolean HardReset);
+static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *, bool HardReset);
static void BusLogic_Message(enum BusLogic_MessageLevel, char *, struct BusLogic_HostAdapter *, ...);
static int __init BusLogic_Setup(char *);
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index 7c006804958..a7f916c0c9c 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -7609,7 +7609,7 @@ FlashPoint__AbortCCB(FlashPoint_CardHandle_T CardHandle,
FlashPoint_AbortCCB(CardHandle, (struct sccb *)CCB);
}
-static inline boolean
+static inline bool
FlashPoint__InterruptPending(FlashPoint_CardHandle_T CardHandle)
{
return FlashPoint_InterruptPending(CardHandle);
@@ -7640,7 +7640,7 @@ extern FlashPoint_CardHandle_T
FlashPoint_HardwareResetHostAdapter(struct FlashPoint_Info *);
extern void FlashPoint_StartCCB(FlashPoint_CardHandle_T, struct BusLogic_CCB *);
extern int FlashPoint_AbortCCB(FlashPoint_CardHandle_T, struct BusLogic_CCB *);
-extern boolean FlashPoint_InterruptPending(FlashPoint_CardHandle_T);
+extern bool FlashPoint_InterruptPending(FlashPoint_CardHandle_T);
extern int FlashPoint_HandleInterrupt(FlashPoint_CardHandle_T);
extern void FlashPoint_ReleaseHostAdapter(FlashPoint_CardHandle_T);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 7869c34a4a3..5bf3f07870b 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -973,6 +973,15 @@ config SCSI_LASI700
many PA-RISC workstations & servers. If you do not know whether you
have a Lasi chip, it is safe to say "Y" here.
+config SCSI_SNI_53C710
+ tristate "SNI RM SCSI support for 53c710"
+ depends on SNI_RM && SCSI
+ select SCSI_SPI_ATTRS
+ select 53C700_LE_ON_BE
+ help
+ This is a driver for the onboard SCSI controller found in older
+ SNI RM workstations & servers.
+
config 53C700_LE_ON_BE
bool
depends on SCSI_LASI700
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index bd7c9888f7f..79ecf4ebe6e 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -124,6 +124,7 @@ obj-$(CONFIG_JAZZ_ESP) += NCR53C9x.o jazz_esp.o
obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o
obj-$(CONFIG_SCSI_FCAL) += fcal.o
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
+obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
obj-$(CONFIG_SCSI_IPR) += ipr.o
obj-$(CONFIG_SCSI_SRP) += libsrp.o
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index 9859cd17fc5..f12864abed2 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -200,6 +200,7 @@ NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
hostdata->base = ioport_map(region, 64);
hostdata->differential = (((1<<siop) & differential) != 0);
hostdata->clock = NCR_D700_CLOCK_MHZ;
+ hostdata->burst_length = 8;
/* and register the siop */
host = NCR_700_detect(&NCR_D700_driver_template, hostdata, p->dev);
diff --git a/drivers/scsi/aacraid/Makefile b/drivers/scsi/aacraid/Makefile
index 28d133a3094..f1cca4ee541 100644
--- a/drivers/scsi/aacraid/Makefile
+++ b/drivers/scsi/aacraid/Makefile
@@ -3,6 +3,6 @@
obj-$(CONFIG_SCSI_AACRAID) := aacraid.o
aacraid-objs := linit.o aachba.o commctrl.o comminit.o commsup.o \
- dpcsup.o rx.o sa.o rkt.o
+ dpcsup.o rx.o sa.o rkt.o nark.o
EXTRA_CFLAGS := -Idrivers/scsi
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 426cd6f49f5..ddb33b06e0e 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -170,9 +170,9 @@ int acbsize = -1;
module_param(acbsize, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware.");
-int expose_physicals = 0;
+int expose_physicals = -1;
module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. 0=off, 1=on");
+MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. -1=protect 0=off, 1=on");
/**
* aac_get_config_status - check the adapter configuration
* @common: adapter to query
@@ -706,6 +706,309 @@ static void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code,
}
}
+static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
+{
+ if (lba & 0xffffffff00000000LL) {
+ int cid = scmd_id(cmd);
+ dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
+ cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
+ SAM_STAT_CHECK_CONDITION;
+ set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
+ HARDWARE_ERROR,
+ SENCODE_INTERNAL_TARGET_FAILURE,
+ ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
+ 0, 0);
+ memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
+ (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(cmd->sense_buffer))
+ ? sizeof(cmd->sense_buffer)
+ : sizeof(dev->fsa_dev[cid].sense_data));
+ cmd->scsi_done(cmd);
+ return 1;
+ }
+ return 0;
+}
+
+static int aac_bounds_64(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
+{
+ return 0;
+}
+
+static void io_callback(void *context, struct fib * fibptr);
+
+static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
+{
+ u16 fibsize;
+ struct aac_raw_io *readcmd;
+ aac_fib_init(fib);
+ readcmd = (struct aac_raw_io *) fib_data(fib);
+ readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
+ readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
+ readcmd->count = cpu_to_le32(count<<9);
+ readcmd->cid = cpu_to_le16(scmd_id(cmd));
+ readcmd->flags = cpu_to_le16(1);
+ readcmd->bpTotal = 0;
+ readcmd->bpComplete = 0;
+
+ aac_build_sgraw(cmd, &readcmd->sg);
+ fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentryraw));
+ BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ return aac_fib_send(ContainerRawIo,
+ fib,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) io_callback,
+ (void *) cmd);
+}
+
+static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
+{
+ u16 fibsize;
+ struct aac_read64 *readcmd;
+ aac_fib_init(fib);
+ readcmd = (struct aac_read64 *) fib_data(fib);
+ readcmd->command = cpu_to_le32(VM_CtHostRead64);
+ readcmd->cid = cpu_to_le16(scmd_id(cmd));
+ readcmd->sector_count = cpu_to_le16(count);
+ readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
+ readcmd->pad = 0;
+ readcmd->flags = 0;
+
+ aac_build_sg64(cmd, &readcmd->sg);
+ fibsize = sizeof(struct aac_read64) +
+ ((le32_to_cpu(readcmd->sg.count) - 1) *
+ sizeof (struct sgentry64));
+ BUG_ON (fibsize > (fib->dev->max_fib_size -
+ sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ return aac_fib_send(ContainerCommand64,
+ fib,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) io_callback,
+ (void *) cmd);
+}
+
+static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
+{
+ u16 fibsize;
+ struct aac_read *readcmd;
+ aac_fib_init(fib);
+ readcmd = (struct aac_read *) fib_data(fib);
+ readcmd->command = cpu_to_le32(VM_CtBlockRead);
+ readcmd->cid = cpu_to_le16(scmd_id(cmd));
+ readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
+ readcmd->count = cpu_to_le32(count * 512);
+
+ aac_build_sg(cmd, &readcmd->sg);
+ fibsize = sizeof(struct aac_read) +
+ ((le32_to_cpu(readcmd->sg.count) - 1) *
+ sizeof (struct sgentry));
+ BUG_ON (fibsize > (fib->dev->max_fib_size -
+ sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ return aac_fib_send(ContainerCommand,
+ fib,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) io_callback,
+ (void *) cmd);
+}
+
+static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
+{
+ u16 fibsize;
+ struct aac_raw_io *writecmd;
+ aac_fib_init(fib);
+ writecmd = (struct aac_raw_io *) fib_data(fib);
+ writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
+ writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
+ writecmd->count = cpu_to_le32(count<<9);
+ writecmd->cid = cpu_to_le16(scmd_id(cmd));
+ writecmd->flags = 0;
+ writecmd->bpTotal = 0;
+ writecmd->bpComplete = 0;
+
+ aac_build_sgraw(cmd, &writecmd->sg);
+ fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentryraw));
+ BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ return aac_fib_send(ContainerRawIo,
+ fib,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) io_callback,
+ (void *) cmd);
+}
+
+static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
+{
+ u16 fibsize;
+ struct aac_write64 *writecmd;
+ aac_fib_init(fib);
+ writecmd = (struct aac_write64 *) fib_data(fib);
+ writecmd->command = cpu_to_le32(VM_CtHostWrite64);
+ writecmd->cid = cpu_to_le16(scmd_id(cmd));
+ writecmd->sector_count = cpu_to_le16(count);
+ writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
+ writecmd->pad = 0;
+ writecmd->flags = 0;
+
+ aac_build_sg64(cmd, &writecmd->sg);
+ fibsize = sizeof(struct aac_write64) +
+ ((le32_to_cpu(writecmd->sg.count) - 1) *
+ sizeof (struct sgentry64));
+ BUG_ON (fibsize > (fib->dev->max_fib_size -
+ sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ return aac_fib_send(ContainerCommand64,
+ fib,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) io_callback,
+ (void *) cmd);
+}
+
+static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
+{
+ u16 fibsize;
+ struct aac_write *writecmd;
+ aac_fib_init(fib);
+ writecmd = (struct aac_write *) fib_data(fib);
+ writecmd->command = cpu_to_le32(VM_CtBlockWrite);
+ writecmd->cid = cpu_to_le16(scmd_id(cmd));
+ writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
+ writecmd->count = cpu_to_le32(count * 512);
+ writecmd->sg.count = cpu_to_le32(1);
+ /* ->stable is not used - it did mean which type of write */
+
+ aac_build_sg(cmd, &writecmd->sg);
+ fibsize = sizeof(struct aac_write) +
+ ((le32_to_cpu(writecmd->sg.count) - 1) *
+ sizeof (struct sgentry));
+ BUG_ON (fibsize > (fib->dev->max_fib_size -
+ sizeof(struct aac_fibhdr)));
+ /*
+ * Now send the Fib to the adapter
+ */
+ return aac_fib_send(ContainerCommand,
+ fib,
+ fibsize,
+ FsaNormal,
+ 0, 1,
+ (fib_callback) io_callback,
+ (void *) cmd);
+}
+
+static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd)
+{
+ struct aac_srb * srbcmd;
+ u32 flag;
+ u32 timeout;
+
+ aac_fib_init(fib);
+ switch(cmd->sc_data_direction){
+ case DMA_TO_DEVICE:
+ flag = SRB_DataOut;
+ break;
+ case DMA_BIDIRECTIONAL:
+ flag = SRB_DataIn | SRB_DataOut;
+ break;
+ case DMA_FROM_DEVICE:
+ flag = SRB_DataIn;
+ break;
+ case DMA_NONE:
+ default: /* shuts up some versions of gcc */
+ flag = SRB_NoDataXfer;
+ break;
+ }
+
+ srbcmd = (struct aac_srb*) fib_data(fib);
+ srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
+ srbcmd->channel = cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd)));
+ srbcmd->id = cpu_to_le32(scmd_id(cmd));
+ srbcmd->lun = cpu_to_le32(cmd->device->lun);
+ srbcmd->flags = cpu_to_le32(flag);
+ timeout = cmd->timeout_per_command/HZ;
+ if (timeout == 0)
+ timeout = 1;
+ srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds
+ srbcmd->retry_limit = 0; /* Obsolete parameter */
+ srbcmd->cdb_size = cpu_to_le32(cmd->cmd_len);
+ return srbcmd;
+}
+
+static void aac_srb_callback(void *context, struct fib * fibptr);
+
+static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)
+{
+ u16 fibsize;
+ struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
+
+ aac_build_sg64(cmd, (struct sgmap64*) &srbcmd->sg);
+ srbcmd->count = cpu_to_le32(cmd->request_bufflen);
+
+ memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
+ memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
+ /*
+ * Build Scatter/Gather list
+ */
+ fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
+ ((le32_to_cpu(srbcmd->sg.count) & 0xff) *
+ sizeof (struct sgentry64));
+ BUG_ON (fibsize > (fib->dev->max_fib_size -
+ sizeof(struct aac_fibhdr)));
+
+ /*
+ * Now send the Fib to the adapter
+ */
+ return aac_fib_send(ScsiPortCommand64, fib,
+ fibsize, FsaNormal, 0, 1,
+ (fib_callback) aac_srb_callback,
+ (void *) cmd);
+}
+
+static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd)
+{
+ u16 fibsize;
+ struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
+
+ aac_build_sg(cmd, (struct sgmap*)&srbcmd->sg);
+ srbcmd->count = cpu_to_le32(cmd->request_bufflen);
+
+ memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
+ memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
+ /*
+ * Build Scatter/Gather list
+ */
+ fibsize = sizeof (struct aac_srb) +
+ (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
+ sizeof (struct sgentry));
+ BUG_ON (fibsize > (fib->dev->max_fib_size -
+ sizeof(struct aac_fibhdr)));
+
+ /*
+ * Now send the Fib to the adapter
+ */
+ return aac_fib_send(ScsiPortCommand, fib, fibsize, FsaNormal, 0, 1,
+ (fib_callback) aac_srb_callback, (void *) cmd);
+}
+
int aac_get_adapter_info(struct aac_dev* dev)
{
struct fib* fibptr;
@@ -874,14 +1177,27 @@ int aac_get_adapter_info(struct aac_dev* dev)
}
}
/*
- * 57 scatter gather elements
+ * Deal with configuring for the individualized limits of each packet
+ * interface.
*/
- if (!(dev->raw_io_interface)) {
+ dev->a_ops.adapter_scsi = (dev->dac_support)
+ ? aac_scsi_64
+ : aac_scsi_32;
+ if (dev->raw_io_interface) {
+ dev->a_ops.adapter_bounds = (dev->raw_io_64)
+ ? aac_bounds_64
+ : aac_bounds_32;
+ dev->a_ops.adapter_read = aac_read_raw_io;
+ dev->a_ops.adapter_write = aac_write_raw_io;
+ } else {
+ dev->a_ops.adapter_bounds = aac_bounds_32;
dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size -
sizeof(struct aac_fibhdr) -
sizeof(struct aac_write) + sizeof(struct sgentry)) /
sizeof(struct sgentry);
if (dev->dac_support) {
+ dev->a_ops.adapter_read = aac_read_block64;
+ dev->a_ops.adapter_write = aac_write_block64;
/*
* 38 scatter gather elements
*/
@@ -891,6 +1207,9 @@ int aac_get_adapter_info(struct aac_dev* dev)
sizeof(struct aac_write64) +
sizeof(struct sgentry64)) /
sizeof(struct sgentry64);
+ } else {
+ dev->a_ops.adapter_read = aac_read_block;
+ dev->a_ops.adapter_write = aac_write_block;
}
dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
@@ -1004,8 +1323,6 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
u64 lba;
u32 count;
int status;
-
- u16 fibsize;
struct aac_dev *dev;
struct fib * cmd_fibcontext;
@@ -1059,23 +1376,8 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
}
dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
smp_processor_id(), (unsigned long long)lba, jiffies));
- if ((!(dev->raw_io_interface) || !(dev->raw_io_64)) &&
- (lba & 0xffffffff00000000LL)) {
- dprintk((KERN_DEBUG "aac_read: Illegal lba\n"));
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
- SAM_STAT_CHECK_CONDITION;
- set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
- HARDWARE_ERROR,
- SENCODE_INTERNAL_TARGET_FAILURE,
- ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
- 0, 0);
- memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
- (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer))
- ? sizeof(scsicmd->sense_buffer)
- : sizeof(dev->fsa_dev[cid].sense_data));
- scsicmd->scsi_done(scsicmd);
+ if (aac_adapter_bounds(dev,scsicmd,lba))
return 0;
- }
/*
* Alocate and initialize a Fib
*/
@@ -1083,85 +1385,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
return -1;
}
- aac_fib_init(cmd_fibcontext);
-
- if (dev->raw_io_interface) {
- struct aac_raw_io *readcmd;
- readcmd = (struct aac_raw_io *) fib_data(cmd_fibcontext);
- readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
- readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
- readcmd->count = cpu_to_le32(count<<9);
- readcmd->cid = cpu_to_le16(cid);
- readcmd->flags = cpu_to_le16(1);
- readcmd->bpTotal = 0;
- readcmd->bpComplete = 0;
-
- aac_build_sgraw(scsicmd, &readcmd->sg);
- fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentryraw));
- BUG_ON(fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr)));
- /*
- * Now send the Fib to the adapter
- */
- status = aac_fib_send(ContainerRawIo,
- cmd_fibcontext,
- fibsize,
- FsaNormal,
- 0, 1,
- (fib_callback) io_callback,
- (void *) scsicmd);
- } else if (dev->dac_support == 1) {
- struct aac_read64 *readcmd;
- readcmd = (struct aac_read64 *) fib_data(cmd_fibcontext);
- readcmd->command = cpu_to_le32(VM_CtHostRead64);
- readcmd->cid = cpu_to_le16(cid);
- readcmd->sector_count = cpu_to_le16(count);
- readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
- readcmd->pad = 0;
- readcmd->flags = 0;
-
- aac_build_sg64(scsicmd, &readcmd->sg);
- fibsize = sizeof(struct aac_read64) +
- ((le32_to_cpu(readcmd->sg.count) - 1) *
- sizeof (struct sgentry64));
- BUG_ON (fibsize > (dev->max_fib_size -
- sizeof(struct aac_fibhdr)));
- /*
- * Now send the Fib to the adapter
- */
- status = aac_fib_send(ContainerCommand64,
- cmd_fibcontext,
- fibsize,
- FsaNormal,
- 0, 1,
- (fib_callback) io_callback,
- (void *) scsicmd);
- } else {
- struct aac_read *readcmd;
- readcmd = (struct aac_read *) fib_data(cmd_fibcontext);
- readcmd->command = cpu_to_le32(VM_CtBlockRead);
- readcmd->cid = cpu_to_le32(cid);
- readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
- readcmd->count = cpu_to_le32(count * 512);
-
- aac_build_sg(scsicmd, &readcmd->sg);
- fibsize = sizeof(struct aac_read) +
- ((le32_to_cpu(readcmd->sg.count) - 1) *
- sizeof (struct sgentry));
- BUG_ON (fibsize > (dev->max_fib_size -
- sizeof(struct aac_fibhdr)));
- /*
- * Now send the Fib to the adapter
- */
- status = aac_fib_send(ContainerCommand,
- cmd_fibcontext,
- fibsize,
- FsaNormal,
- 0, 1,
- (fib_callback) io_callback,
- (void *) scsicmd);
- }
-
-
+ status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count);
/*
* Check that the command queued to the controller
@@ -1187,7 +1411,6 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
u64 lba;
u32 count;
int status;
- u16 fibsize;
struct aac_dev *dev;
struct fib * cmd_fibcontext;
@@ -1227,22 +1450,8 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
}
dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
smp_processor_id(), (unsigned long long)lba, jiffies));
- if ((!(dev->raw_io_interface) || !(dev->raw_io_64))
- && (lba & 0xffffffff00000000LL)) {
- dprintk((KERN_DEBUG "aac_write: Illegal lba\n"));
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
- set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
- HARDWARE_ERROR,
- SENCODE_INTERNAL_TARGET_FAILURE,
- ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0,
- 0, 0);
- memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
- (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer))
- ? sizeof(scsicmd->sense_buffer)
- : sizeof(dev->fsa_dev[cid].sense_data));
- scsicmd->scsi_done(scsicmd);
+ if (aac_adapter_bounds(dev,scsicmd,lba))
return 0;
- }
/*
* Allocate and initialize a Fib then setup a BlockWrite command
*/
@@ -1251,85 +1460,8 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
scsicmd->scsi_done(scsicmd);
return 0;
}
- aac_fib_init(cmd_fibcontext);
- if (dev->raw_io_interface) {
- struct aac_raw_io *writecmd;
- writecmd = (struct aac_raw_io *) fib_data(cmd_fibcontext);
- writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
- writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
- writecmd->count = cpu_to_le32(count<<9);
- writecmd->cid = cpu_to_le16(cid);
- writecmd->flags = 0;
- writecmd->bpTotal = 0;
- writecmd->bpComplete = 0;
-
- aac_build_sgraw(scsicmd, &writecmd->sg);
- fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentryraw));
- BUG_ON(fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr)));
- /*
- * Now send the Fib to the adapter
- */
- status = aac_fib_send(ContainerRawIo,
- cmd_fibcontext,
- fibsize,
- FsaNormal,
- 0, 1,
- (fib_callback) io_callback,
- (void *) scsicmd);
- } else if (dev->dac_support == 1) {
- struct aac_write64 *writecmd;
- writecmd = (struct aac_write64 *) fib_data(cmd_fibcontext);
- writecmd->command = cpu_to_le32(VM_CtHostWrite64);
- writecmd->cid = cpu_to_le16(cid);
- writecmd->sector_count = cpu_to_le16(count);
- writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
- writecmd->pad = 0;
- writecmd->flags = 0;
-
- aac_build_sg64(scsicmd, &writecmd->sg);
- fibsize = sizeof(struct aac_write64) +
- ((le32_to_cpu(writecmd->sg.count) - 1) *
- sizeof (struct sgentry64));
- BUG_ON (fibsize > (dev->max_fib_size -
- sizeof(struct aac_fibhdr)));
- /*
- * Now send the Fib to the adapter
- */
- status = aac_fib_send(ContainerCommand64,
- cmd_fibcontext,
- fibsize,
- FsaNormal,
- 0, 1,
- (fib_callback) io_callback,
- (void *) scsicmd);
- } else {
- struct aac_write *writecmd;
- writecmd = (struct aac_write *) fib_data(cmd_fibcontext);
- writecmd->command = cpu_to_le32(VM_CtBlockWrite);
- writecmd->cid = cpu_to_le32(cid);
- writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
- writecmd->count = cpu_to_le32(count * 512);
- writecmd->sg.count = cpu_to_le32(1);
- /* ->stable is not used - it did mean which type of write */
-
- aac_build_sg(scsicmd, &writecmd->sg);
- fibsize = sizeof(struct aac_write) +
- ((le32_to_cpu(writecmd->sg.count) - 1) *
- sizeof (struct sgentry));
- BUG_ON (fibsize > (dev->max_fib_size -
- sizeof(struct aac_fibhdr)));
- /*
- * Now send the Fib to the adapter
- */
- status = aac_fib_send(ContainerCommand,
- cmd_fibcontext,
- fibsize,
- FsaNormal,
- 0, 1,
- (fib_callback) io_callback,
- (void *) scsicmd);
- }
+ status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count);
/*
* Check that the command queued to the controller
@@ -2099,10 +2231,6 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
struct fib* cmd_fibcontext;
struct aac_dev* dev;
int status;
- struct aac_srb *srbcmd;
- u16 fibsize;
- u32 flag;
- u32 timeout;
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
if (scmd_id(scsicmd) >= dev->maximum_num_physicals ||
@@ -2112,88 +2240,14 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
return 0;
}
- switch(scsicmd->sc_data_direction){
- case DMA_TO_DEVICE:
- flag = SRB_DataOut;
- break;
- case DMA_BIDIRECTIONAL:
- flag = SRB_DataIn | SRB_DataOut;
- break;
- case DMA_FROM_DEVICE:
- flag = SRB_DataIn;
- break;
- case DMA_NONE:
- default: /* shuts up some versions of gcc */
- flag = SRB_NoDataXfer;
- break;
- }
-
-
/*
* Allocate and initialize a Fib then setup a BlockWrite command
*/
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
return -1;
}
- aac_fib_init(cmd_fibcontext);
-
- srbcmd = (struct aac_srb*) fib_data(cmd_fibcontext);
- srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
- srbcmd->channel = cpu_to_le32(aac_logical_to_phys(scmd_channel(scsicmd)));
- srbcmd->id = cpu_to_le32(scmd_id(scsicmd));
- srbcmd->lun = cpu_to_le32(scsicmd->device->lun);
- srbcmd->flags = cpu_to_le32(flag);
- timeout = scsicmd->timeout_per_command/HZ;
- if(timeout == 0){
- timeout = 1;
- }
- srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds
- srbcmd->retry_limit = 0; /* Obsolete parameter */
- srbcmd->cdb_size = cpu_to_le32(scsicmd->cmd_len);
-
- if( dev->dac_support == 1 ) {
- aac_build_sg64(scsicmd, (struct sgmap64*) &srbcmd->sg);
- srbcmd->count = cpu_to_le32(scsicmd->request_bufflen);
-
- memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
- memcpy(srbcmd->cdb, scsicmd->cmnd, scsicmd->cmd_len);
- /*
- * Build Scatter/Gather list
- */
- fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
- ((le32_to_cpu(srbcmd->sg.count) & 0xff) *
- sizeof (struct sgentry64));
- BUG_ON (fibsize > (dev->max_fib_size -
- sizeof(struct aac_fibhdr)));
+ status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
- /*
- * Now send the Fib to the adapter
- */
- status = aac_fib_send(ScsiPortCommand64, cmd_fibcontext,
- fibsize, FsaNormal, 0, 1,
- (fib_callback) aac_srb_callback,
- (void *) scsicmd);
- } else {
- aac_build_sg(scsicmd, (struct sgmap*)&srbcmd->sg);
- srbcmd->count = cpu_to_le32(scsicmd->request_bufflen);
-
- memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
- memcpy(srbcmd->cdb, scsicmd->cmnd, scsicmd->cmd_len);
- /*
- * Build Scatter/Gather list
- */
- fibsize = sizeof (struct aac_srb) +
- (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
- sizeof (struct sgentry));
- BUG_ON (fibsize > (dev->max_fib_size -
- sizeof(struct aac_fibhdr)));
-
- /*
- * Now send the Fib to the adapter
- */
- status = aac_fib_send(ScsiPortCommand, cmd_fibcontext, fibsize, FsaNormal, 0, 1,
- (fib_callback) aac_srb_callback, (void *) scsicmd);
- }
/*
* Check that the command queued to the controller
*/
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 4f8b4c53d43..39ecd0d22eb 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -5,6 +5,7 @@
#define _nblank(x) #x
#define nblank(x) _nblank(x)[0]
+#include <linux/interrupt.h>
/*------------------------------------------------------------------------------
* D E F I N E S
@@ -485,16 +486,28 @@ enum aac_log_level {
struct aac_dev;
struct fib;
+struct scsi_cmnd;
struct adapter_ops
{
+ /* Low level operations */
void (*adapter_interrupt)(struct aac_dev *dev);
void (*adapter_notify)(struct aac_dev *dev, u32 event);
void (*adapter_disable_int)(struct aac_dev *dev);
+ void (*adapter_enable_int)(struct aac_dev *dev);
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
- int (*adapter_send)(struct fib * fib);
+ /* Transport operations */
int (*adapter_ioremap)(struct aac_dev * dev, u32 size);
+ irqreturn_t (*adapter_intr)(int irq, void *dev_id);
+ /* Packet operations */
+ int (*adapter_deliver)(struct fib * fib);
+ int (*adapter_bounds)(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba);
+ int (*adapter_read)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count);
+ int (*adapter_write)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count);
+ int (*adapter_scsi)(struct fib * fib, struct scsi_cmnd * cmd);
+ /* Administrative operations */
+ int (*adapter_comm)(struct aac_dev * dev, int comm);
};
/*
@@ -1018,7 +1031,9 @@ struct aac_dev
u8 nondasd_support;
u8 dac_support;
u8 raid_scsi_mode;
- u8 new_comm_interface;
+ u8 comm_interface;
+# define AAC_COMM_PRODUCER 0
+# define AAC_COMM_MESSAGE 1
/* macro side-effects BEWARE */
# define raw_io_interface \
init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4)
@@ -1036,18 +1051,36 @@ struct aac_dev
#define aac_adapter_disable_int(dev) \
(dev)->a_ops.adapter_disable_int(dev)
+#define aac_adapter_enable_int(dev) \
+ (dev)->a_ops.adapter_enable_int(dev)
+
#define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
(dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
#define aac_adapter_check_health(dev) \
(dev)->a_ops.adapter_check_health(dev)
-#define aac_adapter_send(fib) \
- ((fib)->dev)->a_ops.adapter_send(fib)
-
#define aac_adapter_ioremap(dev, size) \
(dev)->a_ops.adapter_ioremap(dev, size)
+#define aac_adapter_deliver(fib) \
+ ((fib)->dev)->a_ops.adapter_deliver(fib)
+
+#define aac_adapter_bounds(dev,cmd,lba) \
+ dev->a_ops.adapter_bounds(dev,cmd,lba)
+
+#define aac_adapter_read(fib,cmd,lba,count) \
+ ((fib)->dev)->a_ops.adapter_read(fib,cmd,lba,count)
+
+#define aac_adapter_write(fib,cmd,lba,count) \
+ ((fib)->dev)->a_ops.adapter_write(fib,cmd,lba,count)
+
+#define aac_adapter_scsi(fib,cmd) \
+ ((fib)->dev)->a_ops.adapter_scsi(fib,cmd)
+
+#define aac_adapter_comm(dev,comm) \
+ (dev)->a_ops.adapter_comm(dev, comm)
+
#define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001)
/*
@@ -1767,7 +1800,6 @@ static inline u32 cap_to_cyls(sector_t capacity, u32 divisor)
return (u32)capacity;
}
-struct scsi_cmnd;
/* SCp.phase values */
#define AAC_OWNER_MIDLEVEL 0x101
#define AAC_OWNER_LOWLEVEL 0x102
@@ -1794,7 +1826,9 @@ int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg);
int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg);
int aac_rx_init(struct aac_dev *dev);
int aac_rkt_init(struct aac_dev *dev);
+int aac_nark_init(struct aac_dev *dev);
int aac_sa_init(struct aac_dev *dev);
+int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
unsigned int aac_response_normal(struct aac_queue * q);
unsigned int aac_command_normal(struct aac_queue * q);
unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 6d305b2f854..df67ba68602 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -95,7 +95,7 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
init->InitFlags = 0;
- if (dev->new_comm_interface) {
+ if (dev->comm_interface == AAC_COMM_MESSAGE) {
init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
}
@@ -297,21 +297,23 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
- sizeof(struct aac_fibhdr)
- sizeof(struct aac_write) + sizeof(struct sgentry))
/ sizeof(struct sgentry);
- dev->new_comm_interface = 0;
+ dev->comm_interface = AAC_COMM_PRODUCER;
dev->raw_io_64 = 0;
if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) &&
(status[0] == 0x00000001)) {
if (status[1] & AAC_OPT_NEW_COMM_64)
dev->raw_io_64 = 1;
- if (status[1] & AAC_OPT_NEW_COMM)
- dev->new_comm_interface = dev->a_ops.adapter_send != 0;
- if (dev->new_comm_interface && (status[2] > dev->base_size)) {
+ if (dev->a_ops.adapter_comm &&
+ (status[1] & AAC_OPT_NEW_COMM))
+ dev->comm_interface = AAC_COMM_MESSAGE;
+ if ((dev->comm_interface == AAC_COMM_MESSAGE) &&
+ (status[2] > dev->base_size)) {
aac_adapter_ioremap(dev, 0);
dev->base_size = status[2];
if (aac_adapter_ioremap(dev, status[2])) {
/* remap failed, go back ... */
- dev->new_comm_interface = 0;
+ dev->comm_interface = AAC_COMM_PRODUCER;
if (aac_adapter_ioremap(dev, AAC_MIN_FOOTPRINT_SIZE)) {
printk(KERN_WARNING
"aacraid: unable to map adapter.\n");
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 4893a6d06a3..1b97f60652b 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -317,7 +317,7 @@ static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entr
* success.
*/
-static int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify)
+int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify)
{
struct aac_entry * entry = NULL;
int map = 0;
@@ -387,7 +387,6 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
{
struct aac_dev * dev = fibptr->dev;
struct hw_fib * hw_fib = fibptr->hw_fib;
- struct aac_queue * q;
unsigned long flags = 0;
unsigned long qflags;
@@ -469,38 +468,10 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
if (!dev->queues)
return -EBUSY;
- q = &dev->queues->queue[AdapNormCmdQueue];
if(wait)
spin_lock_irqsave(&fibptr->event_lock, flags);
- spin_lock_irqsave(q->lock, qflags);
- if (dev->new_comm_interface) {
- unsigned long count = 10000000L; /* 50 seconds */
- q->numpending++;
- spin_unlock_irqrestore(q->lock, qflags);
- while (aac_adapter_send(fibptr) != 0) {
- if (--count == 0) {
- if (wait)
- spin_unlock_irqrestore(&fibptr->event_lock, flags);
- spin_lock_irqsave(q->lock, qflags);
- q->numpending--;
- spin_unlock_irqrestore(q->lock, qflags);
- return -ETIMEDOUT;
- }
- udelay(5);
- }
- } else {
- u32 index;
- unsigned long nointr = 0;
- aac_queue_get( dev, &index, AdapNormCmdQueue, hw_fib, 1, fibptr, &nointr);
-
- q->numpending++;
- *(q->headers.producer) = cpu_to_le32(index + 1);
- spin_unlock_irqrestore(q->lock, qflags);
- dprintk((KERN_DEBUG "aac_fib_send: inserting a queue entry at index %d.\n",index));
- if (!(nointr & aac_config.irq_mod))
- aac_adapter_notify(dev, AdapNormCmdQueue);
- }
+ aac_adapter_deliver(fibptr);
/*
* If the caller wanted us to wait for response wait now.
@@ -520,6 +491,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
while (down_trylock(&fibptr->event_wait)) {
int blink;
if (--count == 0) {
+ struct aac_queue * q = &dev->queues->queue[AdapNormCmdQueue];
spin_lock_irqsave(q->lock, qflags);
q->numpending--;
spin_unlock_irqrestore(q->lock, qflags);
@@ -659,7 +631,7 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
unsigned long qflags;
if (hw_fib->header.XferState == 0) {
- if (dev->new_comm_interface)
+ if (dev->comm_interface == AAC_COMM_MESSAGE)
kfree (hw_fib);
return 0;
}
@@ -667,7 +639,7 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
* If we plan to do anything check the structure type first.
*/
if ( hw_fib->header.StructType != FIB_MAGIC ) {
- if (dev->new_comm_interface)
+ if (dev->comm_interface == AAC_COMM_MESSAGE)
kfree (hw_fib);
return -EINVAL;
}
@@ -679,7 +651,7 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
* send the completed cdb to the adapter.
*/
if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) {
- if (dev->new_comm_interface) {
+ if (dev->comm_interface == AAC_COMM_MESSAGE) {
kfree (hw_fib);
} else {
u32 index;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index d2cf875af59..a9734e08fe2 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -157,6 +157,7 @@ static struct pci_device_id aac_pci_tbl[] = {
{ 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 58 }, /* Legend Catchall */
{ 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 59 }, /* Adaptec Catch All */
{ 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 60 }, /* Adaptec Rocket Catch All */
+ { 0x9005, 0x0288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 61 }, /* Adaptec NEMER/ARK Catch All */
{ 0,}
};
MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
@@ -230,7 +231,8 @@ static struct aac_driver_ident aac_drivers[] = {
{ aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell Catchall */
{ aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend Catchall */
{ aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec Catch All */
- { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec Rocket Catch All */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */
+ { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec NEMER/ARK Catch All */
};
/**
@@ -396,11 +398,15 @@ static int aac_slave_configure(struct scsi_device *sdev)
sdev->skip_ms_page_3f = 1;
}
if ((sdev->type == TYPE_DISK) &&
- !expose_physicals &&
(sdev_channel(sdev) != CONTAINER_CHANNEL)) {
- struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
- if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
- sdev->no_uld_attach = 1;
+ if (expose_physicals == 0)
+ return -ENXIO;
+ if (expose_physicals < 0) {
+ struct aac_dev *aac =
+ (struct aac_dev *)sdev->host->hostdata;
+ if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
+ sdev->no_uld_attach = 1;
+ }
}
if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) == CONTAINER_CHANNEL)) {
@@ -804,7 +810,6 @@ static struct scsi_host_template aac_driver_template = {
.emulated = 1,
};
-
static int __devinit aac_probe_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
diff --git a/drivers/scsi/aacraid/nark.c b/drivers/scsi/aacraid/nark.c
new file mode 100644
index 00000000000..c76b611b6af
--- /dev/null
+++ b/drivers/scsi/aacraid/nark.c
@@ -0,0 +1,87 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * nark.c
+ *
+ * Abstract: Hardware Device Interface for NEMER/ARK
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+/**
+ * aac_nark_ioremap
+ * @size: mapping resize request
+ *
+ */
+static int aac_nark_ioremap(struct aac_dev * dev, u32 size)
+{
+ if (!size) {
+ iounmap(dev->regs.rx);
+ dev->regs.rx = NULL;
+ iounmap(dev->base);
+ dev->base = NULL;
+ return 0;
+ }
+ dev->scsi_host_ptr->base = pci_resource_start(dev->pdev, 2);
+ dev->regs.rx = ioremap((u64)pci_resource_start(dev->pdev, 0) |
+ ((u64)pci_resource_start(dev->pdev, 1) << 32),
+ sizeof(struct rx_registers) - sizeof(struct rx_inbound));
+ dev->base = NULL;
+ if (dev->regs.rx == NULL)
+ return -1;
+ dev->base = ioremap(dev->scsi_host_ptr->base, size);
+ if (dev->base == NULL) {
+ iounmap(dev->regs.rx);
+ dev->regs.rx = NULL;
+ return -1;
+ }
+ dev->IndexRegs = &((struct rx_registers __iomem *)dev->base)->IndexRegs;
+ return 0;
+}
+
+/**
+ * aac_nark_init - initialize an NEMER/ARK Split Bar card
+ * @dev: device to configure
+ *
+ */
+
+int aac_nark_init(struct aac_dev * dev)
+{
+ extern int _aac_rx_init(struct aac_dev *dev);
+ extern int aac_rx_select_comm(struct aac_dev *dev, int comm);
+
+ /*
+ * Fill in the function dispatch table.
+ */
+ dev->a_ops.adapter_ioremap = aac_nark_ioremap;
+ dev->a_ops.adapter_comm = aac_rx_select_comm;
+
+ return _aac_rx_init(dev);
+}
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
index 643f23b5ded..d953c3fe998 100644
--- a/drivers/scsi/aacraid/rkt.c
+++ b/drivers/scsi/aacraid/rkt.c
@@ -34,6 +34,40 @@
#include "aacraid.h"
+#define AAC_NUM_IO_FIB_RKT (246 - AAC_NUM_MGT_FIB)
+
+/**
+ * aac_rkt_select_comm - Select communications method
+ * @dev: Adapter
+ * @comm: communications method
+ */
+
+static int aac_rkt_select_comm(struct aac_dev *dev, int comm)
+{
+ int retval;
+ extern int aac_rx_select_comm(struct aac_dev *dev, int comm);
+ retval = aac_rx_select_comm(dev, comm);
+ if (comm == AAC_COMM_MESSAGE) {
+ /*
+ * FIB Setup has already been done, but we can minimize the
+ * damage by at least ensuring the OS never issues more
+ * commands than we can handle. The Rocket adapters currently
+ * can only handle 246 commands and 8 AIFs at the same time,
+ * and in fact do notify us accordingly if we negotiate the
+ * FIB size. The problem that causes us to add this check is
+ * to ensure that we do not overdo it with the adapter when a
+ * hard coded FIB override is being utilized. This special
+ * case warrants this half baked, but convenient, check here.
+ */
+ if (dev->scsi_host_ptr->can_queue > AAC_NUM_IO_FIB_RKT) {
+ dev->init->MaxIoCommands =
+ cpu_to_le32(AAC_NUM_IO_FIB_RKT + AAC_NUM_MGT_FIB);
+ dev->scsi_host_ptr->can_queue = AAC_NUM_IO_FIB_RKT;
+ }
+ }
+ return retval;
+}
+
/**
* aac_rkt_ioremap
* @size: mapping resize request
@@ -63,39 +97,13 @@ static int aac_rkt_ioremap(struct aac_dev * dev, u32 size)
int aac_rkt_init(struct aac_dev *dev)
{
- int retval;
extern int _aac_rx_init(struct aac_dev *dev);
- extern void aac_rx_start_adapter(struct aac_dev *dev);
/*
* Fill in the function dispatch table.
*/
dev->a_ops.adapter_ioremap = aac_rkt_ioremap;
+ dev->a_ops.adapter_comm = aac_rkt_select_comm;
- retval = _aac_rx_init(dev);
- if (retval)
- return retval;
- if (dev->new_comm_interface) {
- /*
- * FIB Setup has already been done, but we can minimize the
- * damage by at least ensuring the OS never issues more
- * commands than we can handle. The Rocket adapters currently
- * can only handle 246 commands and 8 AIFs at the same time,
- * and in fact do notify us accordingly if we negotiate the
- * FIB size. The problem that causes us to add this check is
- * to ensure that we do not overdo it with the adapter when a
- * hard coded FIB override is being utilized. This special
- * case warrants this half baked, but convenient, check here.
- */
- if (dev->scsi_host_ptr->can_queue > (246 - AAC_NUM_MGT_FIB)) {
- dev->init->MaxIoCommands = cpu_to_le32(246);
- dev->scsi_host_ptr->can_queue = 246 - AAC_NUM_MGT_FIB;
- }
- }
- /*
- * Tell the adapter that all is configured, and it can start
- * accepting requests
- */
- aac_rx_start_adapter(dev);
- return 0;
+ return _aac_rx_init(dev);
}
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index dcc8b0ea7a9..c632d9354a2 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -46,60 +46,60 @@
#include "aacraid.h"
-static irqreturn_t aac_rx_intr(int irq, void *dev_id)
+static irqreturn_t aac_rx_intr_producer(int irq, void *dev_id)
{
struct aac_dev *dev = dev_id;
+ unsigned long bellbits;
+ u8 intstat = rx_readb(dev, MUnit.OISR);
- dprintk((KERN_DEBUG "aac_rx_intr(%d,%p)\n", irq, dev_id));
- if (dev->new_comm_interface) {
- u32 Index = rx_readl(dev, MUnit.OutboundQueue);
- if (Index == 0xFFFFFFFFL)
- Index = rx_readl(dev, MUnit.OutboundQueue);
- if (Index != 0xFFFFFFFFL) {
- do {
- if (aac_intr_normal(dev, Index)) {
- rx_writel(dev, MUnit.OutboundQueue, Index);
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
- }
- Index = rx_readl(dev, MUnit.OutboundQueue);
- } while (Index != 0xFFFFFFFFL);
- return IRQ_HANDLED;
+ /*
+ * Read mask and invert because drawbridge is reversed.
+ * This allows us to only service interrupts that have
+ * been enabled.
+ * Check to see if this is our interrupt. If it isn't just return
+ */
+ if (intstat & ~(dev->OIMR)) {
+ bellbits = rx_readl(dev, OutboundDoorbellReg);
+ if (bellbits & DoorBellPrintfReady) {
+ aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5]));
+ rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
+ rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
}
- } else {
- unsigned long bellbits;
- u8 intstat;
- intstat = rx_readb(dev, MUnit.OISR);
- /*
- * Read mask and invert because drawbridge is reversed.
- * This allows us to only service interrupts that have
- * been enabled.
- * Check to see if this is our interrupt. If it isn't just return
- */
- if (intstat & ~(dev->OIMR))
- {
- bellbits = rx_readl(dev, OutboundDoorbellReg);
- if (bellbits & DoorBellPrintfReady) {
- aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5]));
- rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
- rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
- }
- else if (bellbits & DoorBellAdapterNormCmdReady) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
- aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
- }
- else if (bellbits & DoorBellAdapterNormRespReady) {
- rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
- aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
- }
- else if (bellbits & DoorBellAdapterNormCmdNotFull) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
- }
- else if (bellbits & DoorBellAdapterNormRespNotFull) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
- }
- return IRQ_HANDLED;
+ else if (bellbits & DoorBellAdapterNormCmdReady) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormRespReady) {
+ rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
+ aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
}
+ else if (bellbits & DoorBellAdapterNormRespNotFull) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ }
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static irqreturn_t aac_rx_intr_message(int irq, void *dev_id)
+{
+ struct aac_dev *dev = dev_id;
+ u32 Index = rx_readl(dev, MUnit.OutboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rx_readl(dev, MUnit.OutboundQueue);
+ if (Index != 0xFFFFFFFFL) {
+ do {
+ if (aac_intr_normal(dev, Index)) {
+ rx_writel(dev, MUnit.OutboundQueue, Index);
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
+ }
+ Index = rx_readl(dev, MUnit.OutboundQueue);
+ } while (Index != 0xFFFFFFFFL);
+ return IRQ_HANDLED;
}
return IRQ_NONE;
}
@@ -115,6 +115,26 @@ static void aac_rx_disable_interrupt(struct aac_dev *dev)
}
/**
+ * aac_rx_enable_interrupt_producer - Enable interrupts
+ * @dev: Adapter
+ */
+
+static void aac_rx_enable_interrupt_producer(struct aac_dev *dev)
+{
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+}
+
+/**
+ * aac_rx_enable_interrupt_message - Enable interrupts
+ * @dev: Adapter
+ */
+
+static void aac_rx_enable_interrupt_message(struct aac_dev *dev)
+{
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+}
+
+/**
* rx_sync_cmd - send a command and wait
* @dev: Adapter
* @command: Command to execute
@@ -189,10 +209,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command,
/*
* Restore interrupt mask even though we timed out
*/
- if (dev->new_comm_interface)
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
- else
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ aac_adapter_enable_int(dev);
return -ETIMEDOUT;
}
/*
@@ -215,10 +232,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command,
/*
* Restore interrupt mask
*/
- if (dev->new_comm_interface)
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
- else
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ aac_adapter_enable_int(dev);
return 0;
}
@@ -360,35 +374,72 @@ static int aac_rx_check_health(struct aac_dev *dev)
}
/**
- * aac_rx_send
+ * aac_rx_deliver_producer
* @fib: fib to issue
*
* Will send a fib, returning 0 if successful.
*/
-static int aac_rx_send(struct fib * fib)
+static int aac_rx_deliver_producer(struct fib * fib)
{
- u64 addr = fib->hw_fib_pa;
struct aac_dev *dev = fib->dev;
- volatile void __iomem *device = dev->regs.rx;
+ struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
+ unsigned long qflags;
u32 Index;
+ unsigned long nointr = 0;
- dprintk((KERN_DEBUG "%p->aac_rx_send(%p->%llx)\n", dev, fib, addr));
- Index = rx_readl(dev, MUnit.InboundQueue);
- if (Index == 0xFFFFFFFFL)
+ spin_lock_irqsave(q->lock, qflags);
+ aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib, 1, fib, &nointr);
+
+ q->numpending++;
+ *(q->headers.producer) = cpu_to_le32(Index + 1);
+ spin_unlock_irqrestore(q->lock, qflags);
+ if (!(nointr & aac_config.irq_mod))
+ aac_adapter_notify(dev, AdapNormCmdQueue);
+
+ return 0;
+}
+
+/**
+ * aac_rx_deliver_message
+ * @fib: fib to issue
+ *
+ * Will send a fib, returning 0 if successful.
+ */
+static int aac_rx_deliver_message(struct fib * fib)
+{
+ struct aac_dev *dev = fib->dev;
+ struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
+ unsigned long qflags;
+ u32 Index;
+ u64 addr;
+ volatile void __iomem *device;
+
+ unsigned long count = 10000000L; /* 50 seconds */
+ spin_lock_irqsave(q->lock, qflags);
+ q->numpending++;
+ spin_unlock_irqrestore(q->lock, qflags);
+ for(;;) {
Index = rx_readl(dev, MUnit.InboundQueue);
- dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
- if (Index == 0xFFFFFFFFL)
- return Index;
+ if (Index == 0xFFFFFFFFL)
+ Index = rx_readl(dev, MUnit.InboundQueue);
+ if (Index != 0xFFFFFFFFL)
+ break;
+ if (--count == 0) {
+ spin_lock_irqsave(q->lock, qflags);
+ q->numpending--;
+ spin_unlock_irqrestore(q->lock, qflags);
+ return -ETIMEDOUT;
+ }
+ udelay(5);
+ }
device = dev->base + Index;
- dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
- (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
+ addr = fib->hw_fib_pa;
writel((u32)(addr & 0xffffffff), device);
device += sizeof(u32);
writel((u32)(addr >> 32), device);
device += sizeof(u32);
writel(le16_to_cpu(fib->hw_fib->header.Size), device);
rx_writel(dev, MUnit.InboundQueue, Index);
- dprintk((KERN_DEBUG "aac_rx_send - return 0\n"));
return 0;
}
@@ -430,6 +481,31 @@ static int aac_rx_restart_adapter(struct aac_dev *dev)
}
/**
+ * aac_rx_select_comm - Select communications method
+ * @dev: Adapter
+ * @comm: communications method
+ */
+
+int aac_rx_select_comm(struct aac_dev *dev, int comm)
+{
+ switch (comm) {
+ case AAC_COMM_PRODUCER:
+ dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_producer;
+ dev->a_ops.adapter_intr = aac_rx_intr_producer;
+ dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
+ break;
+ case AAC_COMM_MESSAGE:
+ dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_message;
+ dev->a_ops.adapter_intr = aac_rx_intr_message;
+ dev->a_ops.adapter_deliver = aac_rx_deliver_message;
+ break;
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+/**
* aac_rx_init - initialize an i960 based AAC card
* @dev: device to configure
*
@@ -489,40 +565,42 @@ int _aac_rx_init(struct aac_dev *dev)
}
msleep(1);
}
- if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev)<0)
- {
- printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
- goto error_iounmap;
- }
/*
- * Fill in the function dispatch table.
+ * Fill in the common function dispatch table.
*/
dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter;
dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt;
dev->a_ops.adapter_notify = aac_rx_notify_adapter;
dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
dev->a_ops.adapter_check_health = aac_rx_check_health;
- dev->a_ops.adapter_send = aac_rx_send;
/*
* First clear out all interrupts. Then enable the one's that we
* can handle.
*/
- rx_writeb(dev, MUnit.OIMR, 0xff);
+ aac_adapter_comm(dev, AAC_COMM_PRODUCER);
+ aac_adapter_disable_int(dev);
rx_writel(dev, MUnit.ODR, 0xffffffff);
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ aac_adapter_enable_int(dev);
if (aac_init_adapter(dev) == NULL)
- goto error_irq;
- if (dev->new_comm_interface)
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ goto error_iounmap;
+ aac_adapter_comm(dev, dev->comm_interface);
+ if (request_irq(dev->scsi_host_ptr->irq, dev->a_ops.adapter_intr,
+ IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) {
+ printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+ name, instance);
+ goto error_iounmap;
+ }
+ aac_adapter_enable_int(dev);
+ /*
+ * Tell the adapter that all is configured, and it can
+ * start accepting requests
+ */
+ aac_rx_start_adapter(dev);
return 0;
-error_irq:
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
- free_irq(dev->scsi_host_ptr->irq, (void *)dev);
-
error_iounmap:
return -1;
@@ -530,20 +608,11 @@ error_iounmap:
int aac_rx_init(struct aac_dev *dev)
{
- int retval;
-
/*
* Fill in the function dispatch table.
*/
dev->a_ops.adapter_ioremap = aac_rx_ioremap;
+ dev->a_ops.adapter_comm = aac_rx_select_comm;
- retval = _aac_rx_init(dev);
- if (!retval) {
- /*
- * Tell the adapter that all is configured, and it can
- * start accepting requests
- */
- aac_rx_start_adapter(dev);
- }
- return retval;
+ return _aac_rx_init(dev);
}
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index 511b0a938fb..8535db068c2 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -92,6 +92,17 @@ static void aac_sa_disable_interrupt (struct aac_dev *dev)
}
/**
+ * aac_sa_enable_interrupt - enable interrupt
+ * @dev: Which adapter to enable.
+ */
+
+static void aac_sa_enable_interrupt (struct aac_dev *dev)
+{
+ sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 |
+ DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
+}
+
+/**
* aac_sa_notify_adapter - handle adapter notification
* @dev: Adapter that notification is for
* @event: Event to notidy
@@ -347,32 +358,36 @@ int aac_sa_init(struct aac_dev *dev)
msleep(1);
}
- if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev ) < 0) {
- printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", name, instance);
- goto error_iounmap;
- }
-
/*
* Fill in the function dispatch table.
*/
dev->a_ops.adapter_interrupt = aac_sa_interrupt_adapter;
dev->a_ops.adapter_disable_int = aac_sa_disable_interrupt;
+ dev->a_ops.adapter_enable_int = aac_sa_enable_interrupt;
dev->a_ops.adapter_notify = aac_sa_notify_adapter;
dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
dev->a_ops.adapter_check_health = aac_sa_check_health;
+ dev->a_ops.adapter_intr = aac_sa_intr;
dev->a_ops.adapter_ioremap = aac_sa_ioremap;
/*
* First clear out all interrupts. Then enable the one's that
* we can handle.
*/
- sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
- sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 |
- DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
+ aac_adapter_disable_int(dev);
+ aac_adapter_enable_int(dev);
if(aac_init_adapter(dev) == NULL)
goto error_irq;
+ if (request_irq(dev->scsi_host_ptr->irq, dev->a_ops.adapter_intr,
+ IRQF_SHARED|IRQF_DISABLED,
+ "aacraid", (void *)dev ) < 0) {
+ printk(KERN_WARNING "%s%d: Interrupt unavailable.\n",
+ name, instance);
+ goto error_iounmap;
+ }
+ aac_adapter_enable_int(dev);
/*
* Tell the adapter that all is configure, and it can start
@@ -382,7 +397,7 @@ int aac_sa_init(struct aac_dev *dev)
return 0;
error_irq:
- sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
+ aac_sa_disable_interrupt(dev);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 306bec355e4..9b3303b6411 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4403,7 +4403,7 @@ advansys_detect(struct scsi_host_template *tpnt)
ASC_DBG1(1,
"advansys_detect: probing I/O port 0x%x...\n",
iop);
- if (check_region(iop, ASC_IOADR_GAP) != 0) {
+ if (!request_region(iop, ASC_IOADR_GAP, "advansys")){
printk(
"AdvanSys SCSI: specified I/O Port 0x%X is busy\n", iop);
/* Don't try this I/O port twice. */
@@ -4413,6 +4413,7 @@ advansys_detect(struct scsi_host_template *tpnt)
printk(
"AdvanSys SCSI: specified I/O Port 0x%X has no adapter\n", iop);
/* Don't try this I/O port twice. */
+ release_region(iop, ASC_IOADR_GAP);
asc_ioport[ioport] = 0;
goto ioport_try_again;
} else {
@@ -4431,6 +4432,7 @@ advansys_detect(struct scsi_host_template *tpnt)
* 'ioport' past this board.
*/
ioport++;
+ release_region(iop, ASC_IOADR_GAP);
goto ioport_try_again;
}
}
@@ -9740,13 +9742,14 @@ AscSearchIOPortAddr11(
}
for (; i < ASC_IOADR_TABLE_MAX_IX; i++) {
iop_base = _asc_def_iop_base[i];
- if (check_region(iop_base, ASC_IOADR_GAP) != 0) {
+ if (!request_region(iop_base, ASC_IOADR_GAP, "advansys")){
ASC_DBG1(1,
"AscSearchIOPortAddr11: check_region() failed I/O port 0x%x\n",
iop_base);
continue;
}
ASC_DBG1(1, "AscSearchIOPortAddr11: probing I/O port 0x%x\n", iop_base);
+ release_region(iop_base, ASC_IOADR_GAP);
if (AscFindSignature(iop_base)) {
return (iop_base);
}
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 170a4344cbb..27adbb294ac 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -1337,9 +1337,6 @@ int ahd_pci_test_register_access(struct ahd_softc *);
/************************** SCB and SCB queue management **********************/
void ahd_qinfifo_requeue_tail(struct ahd_softc *ahd,
struct scb *scb);
-int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb,
- int target, char channel, int lun,
- u_int tag, role_t role);
/****************************** Initialization ********************************/
struct ahd_softc *ahd_alloc(void *platform_arg, char *name);
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 07a86a30f67..9ddc6e4a74b 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -262,6 +262,9 @@ static void ahd_update_coalescing_values(struct ahd_softc *ahd,
u_int mincmds);
static int ahd_verify_vpd_cksum(struct vpd_config *vpd);
static int ahd_wait_seeprom(struct ahd_softc *ahd);
+static int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb,
+ int target, char channel, int lun,
+ u_int tag, role_t role);
/******************************** Private Inlines *****************************/
@@ -7256,7 +7259,7 @@ ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid)
}
/************************** SCB and SCB queue management **********************/
-int
+static int
ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target,
char channel, int lun, u_int tag, role_t role)
{
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 9bfcca5ede0..c7fe478f481 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -1126,15 +1126,6 @@ ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *templa
return 0;
}
-uint64_t
-ahd_linux_get_memsize(void)
-{
- struct sysinfo si;
-
- si_meminfo(&si);
- return ((uint64_t)si.totalram << PAGE_SHIFT);
-}
-
/*
* Place the SCSI bus into a known state by either resetting it,
* or forcing transfer negotiations on the next command to any
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h
index 3a67fc578d7..147c83c456a 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.h
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.h
@@ -496,8 +496,6 @@ ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
int ahd_linux_register_host(struct ahd_softc *,
struct scsi_host_template *);
-uint64_t ahd_linux_get_memsize(void);
-
/*************************** Pretty Printing **********************************/
struct info_str {
char *buffer;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
index 1a3ab6aa856..c62ce41f279 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm_pci.c
@@ -132,6 +132,7 @@ ahd_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct ahd_pci_identity *entry;
char *name;
int error;
+ struct device *dev = &pdev->dev;
pci = pdev;
entry = ahd_find_pci_device(pci);
@@ -161,20 +162,18 @@ ahd_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
if (sizeof(dma_addr_t) > 4) {
- uint64_t memsize;
- const uint64_t mask_39bit = 0x7FFFFFFFFFULL;
+ const u64 required_mask = dma_get_required_mask(dev);
- memsize = ahd_linux_get_memsize();
-
- if (memsize >= 0x8000000000ULL
- && pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) {
+ if (required_mask > DMA_39BIT_MASK &&
+ dma_set_mask(dev, DMA_64BIT_MASK) == 0)
ahd->flags |= AHD_64BIT_ADDRESSING;
- } else if (memsize > 0x80000000
- && pci_set_dma_mask(pdev, mask_39bit) == 0) {
+ else if (required_mask > DMA_32BIT_MASK &&
+ dma_set_mask(dev, DMA_39BIT_MASK) == 0)
ahd->flags |= AHD_39BIT_ADDRESSING;
- }
+ else
+ dma_set_mask(dev, DMA_32BIT_MASK);
} else {
- pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ dma_set_mask(dev, DMA_32BIT_MASK);
}
ahd->dev_softc = pci;
error = ahd_pci_config(ahd, entry);
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index 2cf7bb3123f..8d72bbae96a 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -88,7 +88,7 @@ ahd_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
#define SUBID_9005_LEGACYCONN_FUNC(id) ((id) & 0x20)
-#define SUBID_9005_SEEPTYPE(id) ((id) & 0x0C0) >> 6)
+#define SUBID_9005_SEEPTYPE(id) (((id) & 0x0C0) >> 6)
#define SUBID_9005_SEEPTYPE_NONE 0x0
#define SUBID_9005_SEEPTYPE_4K 0x1
diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c
index 6f8901b748f..c520e5b41fb 100644
--- a/drivers/scsi/aic94xx/aic94xx_dev.c
+++ b/drivers/scsi/aic94xx/aic94xx_dev.c
@@ -37,18 +37,14 @@
static inline int asd_get_ddb(struct asd_ha_struct *asd_ha)
{
- unsigned long flags;
int ddb, i;
- spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
ddb = FIND_FREE_DDB(asd_ha);
if (ddb >= asd_ha->hw_prof.max_ddbs) {
ddb = -ENOMEM;
- spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
goto out;
}
SET_DDB(ddb, asd_ha);
- spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4)
asd_ddbsite_write_dword(asd_ha, ddb, i, 0);
@@ -77,14 +73,10 @@ out:
static inline void asd_free_ddb(struct asd_ha_struct *asd_ha, int ddb)
{
- unsigned long flags;
-
if (!ddb || ddb >= 0xFFFF)
return;
asd_ddbsite_write_byte(asd_ha, ddb, DDB_TYPE, DDB_TYPE_UNUSED);
- spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
CLEAR_DDB(ddb, asd_ha);
- spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
}
static inline void asd_set_ddb_type(struct domain_device *dev)
@@ -320,8 +312,11 @@ out:
int asd_dev_found(struct domain_device *dev)
{
+ unsigned long flags;
int res = 0;
+ struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
switch (dev->dev_type) {
case SATA_PM:
res = asd_init_sata_pm_ddb(dev);
@@ -335,14 +330,18 @@ int asd_dev_found(struct domain_device *dev)
else
res = asd_init_initiator_ddb(dev);
}
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
+
return res;
}
void asd_dev_gone(struct domain_device *dev)
{
int ddb, sister_ddb;
+ unsigned long flags;
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
+ spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
ddb = (int) (unsigned long) dev->lldd_dev;
sister_ddb = asd_ddbsite_read_word(asd_ha, ddb, SISTER_DDB);
@@ -350,4 +349,5 @@ void asd_dev_gone(struct domain_device *dev)
asd_free_ddb(asd_ha, sister_ddb);
asd_free_ddb(asd_ha, ddb);
dev->lldd_dev = NULL;
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
}
diff --git a/drivers/scsi/aic94xx/aic94xx_dump.c b/drivers/scsi/aic94xx/aic94xx_dump.c
index e6ade5996d9..6bd8e3059d2 100644
--- a/drivers/scsi/aic94xx/aic94xx_dump.c
+++ b/drivers/scsi/aic94xx/aic94xx_dump.c
@@ -556,7 +556,7 @@ static void asd_dump_lseq_state(struct asd_ha_struct *asd_ha, int lseq)
PRINT_LMIP_word(asd_ha, lseq, Q_TGTXFR_TAIL);
PRINT_LMIP_byte(asd_ha, lseq, LINK_NUMBER);
PRINT_LMIP_byte(asd_ha, lseq, SCRATCH_FLAGS);
- PRINT_LMIP_qword(asd_ha, lseq, CONNECTION_STATE);
+ PRINT_LMIP_dword(asd_ha, lseq, CONNECTION_STATE);
PRINT_LMIP_word(asd_ha, lseq, CONCTL);
PRINT_LMIP_byte(asd_ha, lseq, CONSTAT);
PRINT_LMIP_byte(asd_ha, lseq, CONNECTION_MODES);
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index fbc82b00a41..bc7744e35ad 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -38,7 +38,7 @@
#include "aic94xx_seq.h"
/* The format is "version.release.patchlevel" */
-#define ASD_DRIVER_VERSION "1.0.2"
+#define ASD_DRIVER_VERSION "1.0.3"
static int use_msi = 0;
module_param_named(use_msi, use_msi, int, S_IRUGO);
@@ -57,6 +57,8 @@ MODULE_PARM_DESC(collector, "\n"
char sas_addr_str[2*SAS_ADDR_SIZE + 1] = "";
static struct scsi_transport_template *aic94xx_transport_template;
+static int asd_scan_finished(struct Scsi_Host *, unsigned long);
+static void asd_scan_start(struct Scsi_Host *);
static struct scsi_host_template aic94xx_sht = {
.module = THIS_MODULE,
@@ -66,6 +68,8 @@ static struct scsi_host_template aic94xx_sht = {
.target_alloc = sas_target_alloc,
.slave_configure = sas_slave_configure,
.slave_destroy = sas_slave_destroy,
+ .scan_finished = asd_scan_finished,
+ .scan_start = asd_scan_start,
.change_queue_depth = sas_change_queue_depth,
.change_queue_type = sas_change_queue_type,
.bios_param = sas_bios_param,
@@ -75,6 +79,8 @@ static struct scsi_host_template aic94xx_sht = {
.sg_tablesize = SG_ALL,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
};
static int __devinit asd_map_memio(struct asd_ha_struct *asd_ha)
@@ -234,7 +240,7 @@ static int __devinit asd_common_setup(struct asd_ha_struct *asd_ha)
}
/* Provide some sane default values. */
asd_ha->hw_prof.max_scbs = 512;
- asd_ha->hw_prof.max_ddbs = 128;
+ asd_ha->hw_prof.max_ddbs = ASD_MAX_DDBS;
asd_ha->hw_prof.num_phys = ASD_MAX_PHYS;
/* All phys are enabled, by default. */
asd_ha->hw_prof.enabled_phys = 0xFF;
@@ -526,6 +532,7 @@ static int asd_register_sas_ha(struct asd_ha_struct *asd_ha)
asd_ha->sas_ha.num_phys= ASD_MAX_PHYS;
asd_ha->sas_ha.lldd_queue_size = asd_ha->seq.can_queue;
+ asd_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num;
return sas_register_ha(&asd_ha->sas_ha);
}
@@ -671,21 +678,10 @@ static int __devinit asd_pci_probe(struct pci_dev *dev,
if (err)
goto Err_reg_sas;
- err = asd_enable_phys(asd_ha, asd_ha->hw_prof.enabled_phys);
- if (err) {
- asd_printk("coudln't enable phys, err:%d\n", err);
- goto Err_en_phys;
- }
- ASD_DPRINTK("enabled phys\n");
- /* give the phy enabling interrupt event time to come in (1s
- * is empirically about all it takes) */
- ssleep(1);
- /* Wait for discovery to finish */
- scsi_flush_work(asd_ha->sas_ha.core.shost);
+ scsi_scan_host(shost);
return 0;
-Err_en_phys:
- asd_unregister_sas_ha(asd_ha);
+
Err_reg_sas:
asd_remove_dev_attrs(asd_ha);
Err_dev_attrs:
@@ -778,6 +774,28 @@ static void __devexit asd_pci_remove(struct pci_dev *dev)
return;
}
+static void asd_scan_start(struct Scsi_Host *shost)
+{
+ struct asd_ha_struct *asd_ha;
+ int err;
+
+ asd_ha = SHOST_TO_SAS_HA(shost)->lldd_ha;
+ err = asd_enable_phys(asd_ha, asd_ha->hw_prof.enabled_phys);
+ if (err)
+ asd_printk("Couldn't enable phys, err:%d\n", err);
+}
+
+static int asd_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ /* give the phy enabling interrupt event time to come in (1s
+ * is empirically about all it takes) */
+ if (time < HZ)
+ return 0;
+ /* Wait for discovery to finish */
+ scsi_flush_work(shost);
+ return 1;
+}
+
static ssize_t asd_version_show(struct device_driver *driver, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", ASD_DRIVER_VERSION);
@@ -885,6 +903,7 @@ static void __exit aic94xx_exit(void)
asd_remove_driver_attrs(&aic94xx_pci_driver.driver);
pci_unregister_driver(&aic94xx_pci_driver);
sas_release_transport(aic94xx_transport_template);
+ asd_release_firmware();
asd_destroy_global_caches();
asd_printk("%s version %s unloaded\n", ASD_DRIVER_DESCRIPTION,
ASD_DRIVER_VERSION);
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index a11f4e6d8bd..a43e8cdf4ee 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -2226,9 +2226,10 @@
#define LmSEQ_SAS_RESET_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0074)
#define LmSEQ_LINK_RESET_RETRY_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0075)
#define LmSEQ_NUM_LINK_RESET_RETRIES(LinkNum) (LmSCRATCH(LinkNum) + 0x0076)
-#define LmSEQ_OOB_INT_ENABLES(LinkNum) (LmSCRATCH(LinkNum) + 0x007A)
+#define LmSEQ_OOB_INT_ENABLES(LinkNum) (LmSCRATCH(LinkNum) + 0x0078)
+#define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007A)
#define LmSEQ_NOTIFY_TIMER_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x007C)
-#define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007E)
+#define LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007E)
/* Mode dependent scratch page 1, mode 0 and mode 1 */
#define LmSEQ_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x0020)
diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
index 9050e93bfd5..fa7c5290257 100644
--- a/drivers/scsi/aic94xx/aic94xx_sas.h
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -34,6 +34,7 @@
* domain that this sequencer can maintain low-level connections for
* us. They are be 64 bytes.
*/
+#define ASD_MAX_DDBS 128
struct asd_ddb_ssp_smp_target_port {
u8 conn_type; /* byte 0 */
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 75ed6b0569d..8f43ff772f2 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -413,40 +413,6 @@ void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id)
}
}
-/* hard reset a phy later */
-static void do_phy_reset_later(struct work_struct *work)
-{
- struct sas_phy *sas_phy =
- container_of(work, struct sas_phy, reset_work);
- int error;
-
- ASD_DPRINTK("%s: About to hard reset phy %d\n", __FUNCTION__,
- sas_phy->identify.phy_identifier);
- /* Reset device port */
- error = sas_phy_reset(sas_phy, 1);
- if (error)
- ASD_DPRINTK("%s: Hard reset of phy %d failed (%d).\n",
- __FUNCTION__, sas_phy->identify.phy_identifier, error);
-}
-
-static void phy_reset_later(struct sas_phy *sas_phy, struct Scsi_Host *shost)
-{
- INIT_WORK(&sas_phy->reset_work, do_phy_reset_later);
- queue_work(shost->work_q, &sas_phy->reset_work);
-}
-
-/* start up the ABORT TASK tmf... */
-static void task_kill_later(struct asd_ascb *ascb)
-{
- struct asd_ha_struct *asd_ha = ascb->ha;
- struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
- struct Scsi_Host *shost = sas_ha->core.shost;
- struct sas_task *task = ascb->uldd_task;
-
- INIT_WORK(&task->abort_work, sas_task_abort);
- queue_work(shost->work_q, &task->abort_work);
-}
-
static void escb_tasklet_complete(struct asd_ascb *ascb,
struct done_list_struct *dl)
{
@@ -479,26 +445,55 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
case REQ_TASK_ABORT: {
struct asd_ascb *a, *b;
u16 tc_abort;
+ struct domain_device *failed_dev = NULL;
+
+ ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
+ __FUNCTION__, dl->status_block[3]);
+ /*
+ * Find the task that caused the abort and abort it first.
+ * The sequencer won't put anything on the done list until
+ * that happens.
+ */
tc_abort = *((u16*)(&dl->status_block[1]));
tc_abort = le16_to_cpu(tc_abort);
- ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
- __FUNCTION__, dl->status_block[3]);
+ list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) {
+ struct sas_task *task = ascb->uldd_task;
- /* Find the pending task and abort it. */
- list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list)
- if (a->tc_index == tc_abort) {
- task_kill_later(a);
+ if (task && a->tc_index == tc_abort) {
+ failed_dev = task->dev;
+ sas_task_abort(task);
break;
}
+ }
+
+ if (!failed_dev) {
+ ASD_DPRINTK("%s: Can't find task (tc=%d) to abort!\n",
+ __FUNCTION__, tc_abort);
+ goto out;
+ }
+
+ /*
+ * Now abort everything else for that device (hba?) so
+ * that the EH will wake up and do something.
+ */
+ list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) {
+ struct sas_task *task = ascb->uldd_task;
+
+ if (task &&
+ task->dev == failed_dev &&
+ a->tc_index != tc_abort)
+ sas_task_abort(task);
+ }
+
goto out;
}
case REQ_DEVICE_RESET: {
- struct Scsi_Host *shost = sas_ha->core.shost;
- struct sas_phy *dev_phy;
struct asd_ascb *a;
u16 conn_handle;
+ unsigned long flags;
+ struct sas_task *last_dev_task = NULL;
conn_handle = *((u16*)(&dl->status_block[1]));
conn_handle = le16_to_cpu(conn_handle);
@@ -506,32 +501,47 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __FUNCTION__,
dl->status_block[3]);
- /* Kill all pending tasks and reset the device */
- dev_phy = NULL;
+ /* Find the last pending task for the device... */
list_for_each_entry(a, &asd_ha->seq.pend_q, list) {
- struct sas_task *task;
- struct domain_device *dev;
u16 x;
+ struct domain_device *dev;
+ struct sas_task *task = a->uldd_task;
- task = a->uldd_task;
if (!task)
continue;
dev = task->dev;
x = (unsigned long)dev->lldd_dev;
- if (x == conn_handle) {
- dev_phy = dev->port->phy;
- task_kill_later(a);
- }
+ if (x == conn_handle)
+ last_dev_task = task;
}
- /* Reset device port */
- if (!dev_phy) {
- ASD_DPRINTK("%s: No pending commands; can't reset.\n",
- __FUNCTION__);
+ if (!last_dev_task) {
+ ASD_DPRINTK("%s: Device reset for idle device %d?\n",
+ __FUNCTION__, conn_handle);
goto out;
}
- phy_reset_later(dev_phy, shost);
+
+ /* ...and set the reset flag */
+ spin_lock_irqsave(&last_dev_task->task_state_lock, flags);
+ last_dev_task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
+ spin_unlock_irqrestore(&last_dev_task->task_state_lock, flags);
+
+ /* Kill all pending tasks for the device */
+ list_for_each_entry(a, &asd_ha->seq.pend_q, list) {
+ u16 x;
+ struct domain_device *dev;
+ struct sas_task *task = a->uldd_task;
+
+ if (!task)
+ continue;
+ dev = task->dev;
+
+ x = (unsigned long)dev->lldd_dev;
+ if (x == conn_handle)
+ sas_task_abort(task);
+ }
+
goto out;
}
case SIGNAL_NCQ_ERROR:
diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c
index e5a0ec37e95..5b0932f6147 100644
--- a/drivers/scsi/aic94xx/aic94xx_sds.c
+++ b/drivers/scsi/aic94xx/aic94xx_sds.c
@@ -427,7 +427,7 @@ struct asd_manuf_sec {
struct asd_manuf_phy_desc {
u8 state; /* low 4 bits */
-#define MS_PHY_STATE_ENABLEABLE 0
+#define MS_PHY_STATE_ENABLED 0
#define MS_PHY_STATE_REPORTED 1
#define MS_PHY_STATE_HIDDEN 2
u8 phy_id;
@@ -756,11 +756,11 @@ static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1)
*
* HIDDEN phys do not count in the total count. REPORTED phys cannot
* be enabled but are reported and counted towards the total.
- * ENEBLEABLE phys are enabled by default and count towards the total.
+ * ENABLED phys are enabled by default and count towards the total.
* The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys
* merely specifies the number of phys the host adapter decided to
* report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN,
- * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENEBLEABLE.
+ * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENABLED.
* In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2
* are actually enabled (enabled by default, max number of phys
* enableable in this case).
@@ -816,8 +816,8 @@ static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha,
asd_ha->hw_prof.enabled_phys &= ~(1 << i);
rep_phys++;
continue;
- case MS_PHY_STATE_ENABLEABLE:
- ASD_DPRINTK("ms: phy%d: ENEBLEABLE\n", i);
+ case MS_PHY_STATE_ENABLED:
+ ASD_DPRINTK("ms: phy%d: ENABLED\n", i);
asd_ha->hw_prof.enabled_phys |= (1 << i);
en_phys++;
break;
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 845112539d0..eae7a247bec 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -810,6 +810,8 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
/* No delay for the first NOTIFY to be sent to the attached target. */
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq),
ASD_NOTIFY_DOWN_COUNT);
+ asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(lseq),
+ ASD_NOTIFY_DOWN_COUNT);
/* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
for (i = 0; i < 2; i++) {
@@ -907,6 +909,16 @@ static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
for (i = 0; i < ASD_SCB_SIZE; i += 4)
asd_scbsite_write_dword(asd_ha, site_no, i, 0);
+ /* Initialize SCB Site Opcode field to invalid. */
+ asd_scbsite_write_byte(asd_ha, site_no,
+ offsetof(struct scb_header, opcode),
+ 0xFF);
+
+ /* Initialize SCB Site Flags field to mean a response
+ * frame has been received. This means inadvertent
+ * frames received to be dropped. */
+ asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
+
/* Workaround needed by SEQ to fix a SATA issue is to exclude
* certain SCB sites from the free list. */
if (!SCB_SITE_VALID(site_no))
@@ -922,16 +934,6 @@ static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
/* Q_NEXT field of the last SCB is invalidated. */
asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no);
- /* Initialize SCB Site Opcode field to invalid. */
- asd_scbsite_write_byte(asd_ha, site_no,
- offsetof(struct scb_header, opcode),
- 0xFF);
-
- /* Initialize SCB Site Flags field to mean a response
- * frame has been received. This means inadvertent
- * frames received to be dropped. */
- asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
-
first_scb_site_no = site_no;
max_scbs++;
}
@@ -1173,6 +1175,16 @@ static void asd_init_ddb_0(struct asd_ha_struct *asd_ha)
set_bit(0, asd_ha->hw_prof.ddb_bitmap);
}
+static void asd_seq_init_ddb_sites(struct asd_ha_struct *asd_ha)
+{
+ unsigned int i;
+ unsigned int ddb_site;
+
+ for (ddb_site = 0 ; ddb_site < ASD_MAX_DDBS; ddb_site++)
+ for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4)
+ asd_ddbsite_write_dword(asd_ha, ddb_site, i, 0);
+}
+
/**
* asd_seq_setup_seqs -- setup and initialize central and link sequencers
* @asd_ha: pointer to host adapter structure
@@ -1182,6 +1194,9 @@ static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha)
int lseq;
u8 lseq_mask;
+ /* Initialize DDB sites */
+ asd_seq_init_ddb_sites(asd_ha);
+
/* Initialize SCB sites. Done first to compute some values which
* the rest of the init code depends on. */
asd_init_scb_sites(asd_ha);
@@ -1232,6 +1247,13 @@ static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
return asd_seq_unpause_lseq(asd_ha, lseq);
}
+int asd_release_firmware(void)
+{
+ if (sequencer_fw)
+ release_firmware(sequencer_fw);
+ return 0;
+}
+
static int asd_request_firmware(struct asd_ha_struct *asd_ha)
{
int err, i;
@@ -1375,7 +1397,9 @@ void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
u8 phy_is_up;
u8 mask;
int i, err;
+ unsigned long flags;
+ spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
for_each_phy(phy_mask, mask, i)
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared,
@@ -1395,6 +1419,7 @@ void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
break;
}
}
+ spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags);
if (err)
asd_printk("couldn't update DDB 0:error:%d\n", err);
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.h b/drivers/scsi/aic94xx/aic94xx_seq.h
index 9e715e5496a..9437ff0ae3a 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.h
+++ b/drivers/scsi/aic94xx/aic94xx_seq.h
@@ -63,6 +63,7 @@ int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
int asd_init_seqs(struct asd_ha_struct *asd_ha);
int asd_start_seqs(struct asd_ha_struct *asd_ha);
+int asd_release_firmware(void);
void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy);
#endif
diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c
index d202ed5a670..e2ad5bed940 100644
--- a/drivers/scsi/aic94xx/aic94xx_task.c
+++ b/drivers/scsi/aic94xx/aic94xx_task.c
@@ -349,6 +349,7 @@ Again:
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
task->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((task->task_state_flags & SAS_TASK_STATE_ABORTED))) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
@@ -557,6 +558,7 @@ int asd_execute_task(struct sas_task *task, const int num,
struct sas_task *t = task;
struct asd_ascb *ascb = NULL, *a;
struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
+ unsigned long flags;
res = asd_can_queue(asd_ha, num);
if (res)
@@ -599,6 +601,10 @@ int asd_execute_task(struct sas_task *task, const int num,
}
if (res)
goto out_err_unmap;
+
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
}
list_del_init(&alist);
@@ -617,6 +623,9 @@ out_err_unmap:
if (a == b)
break;
t = a->uldd_task;
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
switch (t->task_proto) {
case SATA_PROTO:
case SAS_PROTO_STP:
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
index 61234384503..9a14a6d9727 100644
--- a/drivers/scsi/aic94xx/aic94xx_tmf.c
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -566,9 +566,7 @@ static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun,
res = TMF_RESP_FUNC_ESUPP;
break;
default:
- ASD_DPRINTK("%s: converting result 0x%x to TMF_RESP_FUNC_FAILED\n",
- __FUNCTION__, res);
- res = TMF_RESP_FUNC_FAILED;
+ /* Allow TMF response codes to propagate upwards */
break;
}
out_err:
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 821386c7b57..95045e33710 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -595,10 +595,8 @@ static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
{
int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
- if (pcix_cmd_reg == 0) {
- dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n");
- return -EIO;
- }
+ if (pcix_cmd_reg == 0)
+ return 0;
if (pci_read_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
&ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
@@ -627,10 +625,6 @@ static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
dev_err(&ioa_cfg->pdev->dev, "Failed to setup PCI-X command register\n");
return -EIO;
}
- } else {
- dev_err(&ioa_cfg->pdev->dev,
- "Failed to setup PCI-X command register\n");
- return -EIO;
}
return 0;
@@ -6314,7 +6308,6 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
int rc;
ENTER;
- pci_unblock_user_cfg_access(ioa_cfg->pdev);
rc = pci_restore_state(ioa_cfg->pdev);
if (rc != PCIBIOS_SUCCESSFUL) {
@@ -6355,6 +6348,24 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
}
/**
+ * ipr_reset_bist_done - BIST has completed on the adapter.
+ * @ipr_cmd: ipr command struct
+ *
+ * Description: Unblock config space and resume the reset process.
+ *
+ * Return value:
+ * IPR_RC_JOB_CONTINUE
+ **/
+static int ipr_reset_bist_done(struct ipr_cmnd *ipr_cmd)
+{
+ ENTER;
+ pci_unblock_user_cfg_access(ipr_cmd->ioa_cfg->pdev);
+ ipr_cmd->job_step = ipr_reset_restore_cfg_space;
+ LEAVE;
+ return IPR_RC_JOB_CONTINUE;
+}
+
+/**
* ipr_reset_start_bist - Run BIST on the adapter.
* @ipr_cmd: ipr command struct
*
@@ -6376,7 +6387,7 @@ static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
rc = IPR_RC_JOB_CONTINUE;
} else {
- ipr_cmd->job_step = ipr_reset_restore_cfg_space;
+ ipr_cmd->job_step = ipr_reset_bist_done;
ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
rc = IPR_RC_JOB_RETURN;
}
@@ -7166,9 +7177,6 @@ ipr_get_chip_cfg(const struct pci_device_id *dev_id)
{
int i;
- if (dev_id->driver_data)
- return (const struct ipr_chip_cfg_t *)dev_id->driver_data;
-
for (i = 0; i < ARRAY_SIZE(ipr_chip); i++)
if (ipr_chip[i].vendor == dev_id->vendor &&
ipr_chip[i].device == dev_id->device)
@@ -7517,62 +7525,43 @@ static void ipr_shutdown(struct pci_dev *pdev)
static struct pci_device_id ipr_pci_table[] __devinitdata = {
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5702,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5702, 0, 0, 0 },
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5703,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5703, 0, 0, 0 },
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573D,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573D, 0, 0, 0 },
{ PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573E,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573E, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571B,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571B, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572E,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572E, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0, 0 },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F, 0, 0, 0 },
{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
+ PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F, 0, 0, 0 },
{ }
};
MODULE_DEVICE_TABLE(pci, ipr_pci_table);
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 9f62a1d4d51..88f285de97b 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -37,8 +37,8 @@
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.3.0"
-#define IPR_DRIVER_DATE "(November 8, 2006)"
+#define IPR_DRIVER_VERSION "2.3.1"
+#define IPR_DRIVER_DATE "(January 23, 2007)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index f0871c3ac3d..2aae1b081fc 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -123,6 +123,7 @@ lasi700_probe(struct parisc_device *dev)
hostdata->force_le_on_be = 0;
hostdata->chip710 = 1;
hostdata->dmode_extra = DMODE_FC2;
+ hostdata->burst_length = 8;
}
host = NCR_700_detect(&lasi700_template, hostdata, &dev->dev);
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index fb7df7b7581..a65598b1e53 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -548,7 +548,7 @@ int sas_discover_sata(struct domain_device *dev)
res = sas_notify_lldd_dev_found(dev);
if (res)
- return res;
+ goto out_err2;
switch (dev->dev_type) {
case SATA_DEV:
@@ -560,11 +560,23 @@ int sas_discover_sata(struct domain_device *dev)
default:
break;
}
+ if (res)
+ goto out_err;
sas_notify_lldd_dev_gone(dev);
- if (!res) {
- sas_notify_lldd_dev_found(dev);
- }
+ res = sas_notify_lldd_dev_found(dev);
+ if (res)
+ goto out_err2;
+
+ res = sas_rphy_add(dev->rphy);
+ if (res)
+ goto out_err;
+
+ return res;
+
+out_err:
+ sas_notify_lldd_dev_gone(dev);
+out_err2:
return res;
}
@@ -580,21 +592,17 @@ int sas_discover_end_dev(struct domain_device *dev)
res = sas_notify_lldd_dev_found(dev);
if (res)
- return res;
+ goto out_err2;
res = sas_rphy_add(dev->rphy);
if (res)
goto out_err;
- /* do this to get the end device port attributes which will have
- * been scanned in sas_rphy_add */
- sas_notify_lldd_dev_gone(dev);
- sas_notify_lldd_dev_found(dev);
-
return 0;
out_err:
sas_notify_lldd_dev_gone(dev);
+out_err2:
return res;
}
@@ -649,6 +657,7 @@ void sas_unregister_domain_devices(struct asd_sas_port *port)
*/
static void sas_discover_domain(struct work_struct *work)
{
+ struct domain_device *dev;
int error = 0;
struct sas_discovery_event *ev =
container_of(work, struct sas_discovery_event, work);
@@ -658,35 +667,42 @@ static void sas_discover_domain(struct work_struct *work)
&port->disc.pending);
if (port->port_dev)
- return ;
- else {
- error = sas_get_port_device(port);
- if (error)
- return;
- }
+ return;
+
+ error = sas_get_port_device(port);
+ if (error)
+ return;
+ dev = port->port_dev;
SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
current->pid);
- switch (port->port_dev->dev_type) {
+ switch (dev->dev_type) {
case SAS_END_DEV:
- error = sas_discover_end_dev(port->port_dev);
+ error = sas_discover_end_dev(dev);
break;
case EDGE_DEV:
case FANOUT_DEV:
- error = sas_discover_root_expander(port->port_dev);
+ error = sas_discover_root_expander(dev);
break;
case SATA_DEV:
case SATA_PM:
- error = sas_discover_sata(port->port_dev);
+ error = sas_discover_sata(dev);
break;
default:
- SAS_DPRINTK("unhandled device %d\n", port->port_dev->dev_type);
+ SAS_DPRINTK("unhandled device %d\n", dev->dev_type);
break;
}
if (error) {
- kfree(port->port_dev); /* not kobject_register-ed yet */
+ sas_rphy_free(dev->rphy);
+ dev->rphy = NULL;
+
+ spin_lock(&port->dev_list_lock);
+ list_del_init(&dev->dev_list_node);
+ spin_unlock(&port->dev_list_lock);
+
+ kfree(dev); /* not kobject_register-ed yet */
port->port_dev = NULL;
}
@@ -726,7 +742,7 @@ int sas_discover_event(struct asd_sas_port *port, enum discover_event ev)
BUG_ON(ev >= DISC_NUM_EVENTS);
sas_queue_event(ev, &disc->disc_event_lock, &disc->pending,
- &disc->disc_work[ev].work, port->ha->core.shost);
+ &disc->disc_work[ev].work, port->ha);
return 0;
}
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c
index d83392ee682..9db30fb5caf 100644
--- a/drivers/scsi/libsas/sas_event.c
+++ b/drivers/scsi/libsas/sas_event.c
@@ -31,7 +31,7 @@ static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event)
BUG_ON(event >= HA_NUM_EVENTS);
sas_queue_event(event, &sas_ha->event_lock, &sas_ha->pending,
- &sas_ha->ha_events[event].work, sas_ha->core.shost);
+ &sas_ha->ha_events[event].work, sas_ha);
}
static void notify_port_event(struct asd_sas_phy *phy, enum port_event event)
@@ -41,7 +41,7 @@ static void notify_port_event(struct asd_sas_phy *phy, enum port_event event)
BUG_ON(event >= PORT_NUM_EVENTS);
sas_queue_event(event, &ha->event_lock, &phy->port_events_pending,
- &phy->port_events[event].work, ha->core.shost);
+ &phy->port_events[event].work, ha);
}
static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
@@ -51,7 +51,7 @@ static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event)
BUG_ON(event >= PHY_NUM_EVENTS);
sas_queue_event(event, &ha->event_lock, &phy->phy_events_pending,
- &phy->phy_events[event].work, ha->core.shost);
+ &phy->phy_events[event].work, ha);
}
int sas_init_events(struct sas_ha_struct *sas_ha)
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index d31e6fa466f..dc70c180e11 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -667,8 +667,9 @@ static struct domain_device *sas_ex_discover_end_dev(
return child;
out_list_del:
+ sas_rphy_free(child->rphy);
+ child->rphy = NULL;
list_del(&child->dev_list_node);
- sas_rphy_free(rphy);
out_free:
sas_port_delete(phy->port);
out_err:
@@ -677,6 +678,29 @@ static struct domain_device *sas_ex_discover_end_dev(
return NULL;
}
+/* See if this phy is part of a wide port */
+static int sas_ex_join_wide_port(struct domain_device *parent, int phy_id)
+{
+ struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
+ int i;
+
+ for (i = 0; i < parent->ex_dev.num_phys; i++) {
+ struct ex_phy *ephy = &parent->ex_dev.ex_phy[i];
+
+ if (ephy == phy)
+ continue;
+
+ if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
+ SAS_ADDR_SIZE) && ephy->port) {
+ sas_port_add_phy(ephy->port, phy->phy);
+ phy->phy_state = PHY_DEVICE_DISCOVERED;
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+
static struct domain_device *sas_ex_discover_expander(
struct domain_device *parent, int phy_id)
{
@@ -809,6 +833,13 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
return res;
}
+ res = sas_ex_join_wide_port(dev, phy_id);
+ if (!res) {
+ SAS_DPRINTK("Attaching ex phy%d to wide port %016llx\n",
+ phy_id, SAS_ADDR(ex_phy->attached_sas_addr));
+ return res;
+ }
+
switch (ex_phy->attached_dev_type) {
case SAS_END_DEV:
child = sas_ex_discover_end_dev(dev, phy_id);
@@ -1431,14 +1462,23 @@ int sas_discover_root_expander(struct domain_device *dev)
int res;
struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
- sas_rphy_add(dev->rphy);
+ res = sas_rphy_add(dev->rphy);
+ if (res)
+ goto out_err;
ex->level = dev->port->disc.max_level; /* 0 */
res = sas_discover_expander(dev);
- if (!res)
- sas_ex_bfs_disc(dev->port);
+ if (res)
+ goto out_err2;
+
+ sas_ex_bfs_disc(dev->port);
return res;
+
+out_err2:
+ sas_rphy_remove(dev->rphy);
+out_err:
+ return res;
}
/* ---------- Domain revalidation ---------- */
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index 2f0c07fc3f4..965698c8b7b 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -87,6 +87,9 @@ int sas_register_ha(struct sas_ha_struct *sas_ha)
else if (sas_ha->lldd_queue_size == -1)
sas_ha->lldd_queue_size = 128; /* Sanity */
+ sas_ha->state = SAS_HA_REGISTERED;
+ spin_lock_init(&sas_ha->state_lock);
+
error = sas_register_phys(sas_ha);
if (error) {
printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
@@ -127,12 +130,22 @@ Undo_phys:
int sas_unregister_ha(struct sas_ha_struct *sas_ha)
{
+ unsigned long flags;
+
+ /* Set the state to unregistered to avoid further
+ * events to be queued */
+ spin_lock_irqsave(&sas_ha->state_lock, flags);
+ sas_ha->state = SAS_HA_UNREGISTERED;
+ spin_unlock_irqrestore(&sas_ha->state_lock, flags);
+ scsi_flush_work(sas_ha->core.shost);
+
+ sas_unregister_ports(sas_ha);
+
if (sas_ha->lldd_max_execute_num > 1) {
sas_shutdown_queue(sas_ha);
+ sas_ha->lldd_max_execute_num = 1;
}
- sas_unregister_ports(sas_ha);
-
return 0;
}
@@ -146,6 +159,36 @@ static int sas_get_linkerrors(struct sas_phy *phy)
return sas_smp_get_phy_events(phy);
}
+int sas_phy_enable(struct sas_phy *phy, int enable)
+{
+ int ret;
+ enum phy_func command;
+
+ if (enable)
+ command = PHY_FUNC_LINK_RESET;
+ else
+ command = PHY_FUNC_DISABLE;
+
+ if (scsi_is_sas_phy_local(phy)) {
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+ struct sas_internal *i =
+ to_sas_internal(sas_ha->core.shost->transportt);
+
+ if (!enable) {
+ sas_phy_disconnected(asd_phy);
+ sas_ha->notify_phy_event(asd_phy, PHYE_LOSS_OF_SIGNAL);
+ }
+ ret = i->dft->lldd_control_phy(asd_phy, command, NULL);
+ } else {
+ struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+ struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+ ret = sas_smp_phy_control(ddev, phy->number, command, NULL);
+ }
+ return ret;
+}
+
int sas_phy_reset(struct sas_phy *phy, int hard_reset)
{
int ret;
@@ -172,8 +215,8 @@ int sas_phy_reset(struct sas_phy *phy, int hard_reset)
return ret;
}
-static int sas_set_phy_speed(struct sas_phy *phy,
- struct sas_phy_linkrates *rates)
+int sas_set_phy_speed(struct sas_phy *phy,
+ struct sas_phy_linkrates *rates)
{
int ret;
@@ -212,6 +255,7 @@ static int sas_set_phy_speed(struct sas_phy *phy,
}
static struct sas_function_template sft = {
+ .phy_enable = sas_phy_enable,
.phy_reset = sas_phy_reset,
.set_phy_speed = sas_set_phy_speed,
.get_linkerrors = sas_get_linkerrors,
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 137d7e496b6..a78638df201 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -80,7 +80,7 @@ void sas_hae_reset(struct work_struct *work);
static inline void sas_queue_event(int event, spinlock_t *lock,
unsigned long *pending,
struct work_struct *work,
- struct Scsi_Host *shost)
+ struct sas_ha_struct *sas_ha)
{
unsigned long flags;
@@ -91,7 +91,12 @@ static inline void sas_queue_event(int event, spinlock_t *lock,
}
__set_bit(event, pending);
spin_unlock_irqrestore(lock, flags);
- scsi_queue_work(shost, work);
+
+ spin_lock_irqsave(&sas_ha->state_lock, flags);
+ if (sas_ha->state != SAS_HA_UNREGISTERED) {
+ scsi_queue_work(sas_ha->core.shost, work);
+ }
+ spin_unlock_irqrestore(&sas_ha->state_lock, flags);
}
static inline void sas_begin_event(int event, spinlock_t *lock,
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index 971c37ceecb..e1e2d085c92 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -42,10 +42,11 @@ static void sas_form_port(struct asd_sas_phy *phy)
struct asd_sas_port *port = phy->port;
struct sas_internal *si =
to_sas_internal(sas_ha->core.shost->transportt);
+ unsigned long flags;
if (port) {
if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
- SAS_ADDR_SIZE) == 0)
+ SAS_ADDR_SIZE) != 0)
sas_deform_port(phy);
else {
SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
@@ -56,7 +57,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
}
/* find a port */
- spin_lock(&sas_ha->phy_port_lock);
+ spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
for (i = 0; i < sas_ha->num_phys; i++) {
port = sas_ha->sas_port[i];
spin_lock(&port->phy_list_lock);
@@ -78,7 +79,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
if (i >= sas_ha->num_phys) {
printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
__FUNCTION__);
- spin_unlock(&sas_ha->phy_port_lock);
+ spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
return;
}
@@ -105,7 +106,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
} else
port->linkrate = max(port->linkrate, phy->linkrate);
spin_unlock(&port->phy_list_lock);
- spin_unlock(&sas_ha->phy_port_lock);
+ spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
if (!port->port) {
port->port = sas_port_alloc(phy->phy->dev.parent, port->id);
@@ -137,6 +138,7 @@ void sas_deform_port(struct asd_sas_phy *phy)
struct asd_sas_port *port = phy->port;
struct sas_internal *si =
to_sas_internal(sas_ha->core.shost->transportt);
+ unsigned long flags;
if (!port)
return; /* done by a phy event */
@@ -155,7 +157,7 @@ void sas_deform_port(struct asd_sas_phy *phy)
if (si->dft->lldd_port_deformed)
si->dft->lldd_port_deformed(phy);
- spin_lock(&sas_ha->phy_port_lock);
+ spin_lock_irqsave(&sas_ha->phy_port_lock, flags);
spin_lock(&port->phy_list_lock);
list_del_init(&phy->port_phy_el);
@@ -174,7 +176,7 @@ void sas_deform_port(struct asd_sas_phy *phy)
port->phy_mask = 0;
}
spin_unlock(&port->phy_list_lock);
- spin_unlock(&sas_ha->phy_port_lock);
+ spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
return;
}
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 22672d54aa2..897a5e2c55e 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -34,6 +34,7 @@
#include <scsi/scsi_transport_sas.h>
#include "../scsi_sas_internal.h"
#include "../scsi_transport_api.h"
+#include "../scsi_priv.h"
#include <linux/err.h>
#include <linux/blkdev.h>
@@ -130,7 +131,7 @@ static enum task_attribute sas_scsi_get_task_attr(struct scsi_cmnd *cmd)
if (cmd->request && blk_rq_tagged(cmd->request)) {
if (cmd->device->ordered_tags &&
(cmd->request->cmd_flags & REQ_HARDBARRIER))
- ta = TASK_ATTR_HOQ;
+ ta = TASK_ATTR_ORDERED;
}
return ta;
}
@@ -281,6 +282,7 @@ enum task_disposition {
TASK_IS_ABORTED,
TASK_IS_AT_LU,
TASK_IS_NOT_AT_LU,
+ TASK_ABORT_FAILED,
};
static enum task_disposition sas_scsi_find_task(struct sas_task *task)
@@ -310,15 +312,6 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
spin_unlock_irqrestore(&core->task_queue_lock, flags);
}
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (task->task_state_flags & SAS_TASK_INITIATOR_ABORTED) {
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- SAS_DPRINTK("%s: task 0x%p already aborted\n",
- __FUNCTION__, task);
- return TASK_IS_ABORTED;
- }
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
for (i = 0; i < 5; i++) {
SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
res = si->dft->lldd_abort_task(task);
@@ -340,15 +333,21 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
SAS_DPRINTK("%s: querying task 0x%p\n",
__FUNCTION__, task);
res = si->dft->lldd_query_task(task);
- if (res == TMF_RESP_FUNC_SUCC) {
+ switch (res) {
+ case TMF_RESP_FUNC_SUCC:
SAS_DPRINTK("%s: task 0x%p at LU\n",
__FUNCTION__, task);
return TASK_IS_AT_LU;
- } else if (res == TMF_RESP_FUNC_COMPLETE) {
+ case TMF_RESP_FUNC_COMPLETE:
SAS_DPRINTK("%s: task 0x%p not at LU\n",
__FUNCTION__, task);
return TASK_IS_NOT_AT_LU;
- }
+ case TMF_RESP_FUNC_FAILED:
+ SAS_DPRINTK("%s: task 0x%p failed to abort\n",
+ __FUNCTION__, task);
+ return TASK_ABORT_FAILED;
+ }
+
}
}
return res;
@@ -398,35 +397,113 @@ static int sas_recover_I_T(struct domain_device *dev)
return res;
}
-void sas_scsi_recover_host(struct Scsi_Host *shost)
+/* Find the sas_phy that's attached to this device */
+struct sas_phy *find_local_sas_phy(struct domain_device *dev)
+{
+ struct domain_device *pdev = dev->parent;
+ struct ex_phy *exphy = NULL;
+ int i;
+
+ /* Directly attached device */
+ if (!pdev)
+ return dev->port->phy;
+
+ /* Otherwise look in the expander */
+ for (i = 0; i < pdev->ex_dev.num_phys; i++)
+ if (!memcmp(dev->sas_addr,
+ pdev->ex_dev.ex_phy[i].attached_sas_addr,
+ SAS_ADDR_SIZE)) {
+ exphy = &pdev->ex_dev.ex_phy[i];
+ break;
+ }
+
+ BUG_ON(!exphy);
+ return exphy->phy;
+}
+
+/* Attempt to send a LUN reset message to a device */
+int sas_eh_device_reset_handler(struct scsi_cmnd *cmd)
+{
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+ struct scsi_lun lun;
+ int res;
+
+ int_to_scsilun(cmd->device->lun, &lun);
+
+ if (!i->dft->lldd_lu_reset)
+ return FAILED;
+
+ res = i->dft->lldd_lu_reset(dev, lun.scsi_lun);
+ if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
+ return SUCCESS;
+
+ return FAILED;
+}
+
+/* Attempt to send a phy (bus) reset */
+int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd)
+{
+ struct domain_device *dev = cmd_to_domain_dev(cmd);
+ struct sas_phy *phy = find_local_sas_phy(dev);
+ int res;
+
+ res = sas_phy_reset(phy, 1);
+ if (res)
+ SAS_DPRINTK("Bus reset of %s failed 0x%x\n",
+ phy->dev.kobj.k_name,
+ res);
+ if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
+ return SUCCESS;
+
+ return FAILED;
+}
+
+/* Try to reset a device */
+static int try_to_reset_cmd_device(struct Scsi_Host *shost,
+ struct scsi_cmnd *cmd)
+{
+ int res;
+
+ if (!shost->hostt->eh_device_reset_handler)
+ goto try_bus_reset;
+
+ res = shost->hostt->eh_device_reset_handler(cmd);
+ if (res == SUCCESS)
+ return res;
+
+try_bus_reset:
+ if (shost->hostt->eh_bus_reset_handler)
+ return shost->hostt->eh_bus_reset_handler(cmd);
+
+ return FAILED;
+}
+
+static int sas_eh_handle_sas_errors(struct Scsi_Host *shost,
+ struct list_head *work_q,
+ struct list_head *done_q)
{
- struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
- unsigned long flags;
- LIST_HEAD(error_q);
struct scsi_cmnd *cmd, *n;
enum task_disposition res = TASK_IS_DONE;
- int tmf_resp;
+ int tmf_resp, need_reset;
struct sas_internal *i = to_sas_internal(shost->transportt);
+ unsigned long flags;
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
- spin_lock_irqsave(shost->host_lock, flags);
- list_splice_init(&shost->eh_cmd_q, &error_q);
- spin_unlock_irqrestore(shost->host_lock, flags);
-
- SAS_DPRINTK("Enter %s\n", __FUNCTION__);
-
- /* All tasks on this list were marked SAS_TASK_STATE_ABORTED
- * by sas_scsi_timed_out() callback.
- */
Again:
- SAS_DPRINTK("going over list...\n");
- list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+ list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
struct sas_task *task = TO_SAS_TASK(cmd);
- list_del_init(&cmd->eh_entry);
- if (!task) {
- SAS_DPRINTK("%s: taskless cmd?!\n", __FUNCTION__);
+ if (!task)
continue;
- }
+
+ list_del_init(&cmd->eh_entry);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ need_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
SAS_DPRINTK("trying to find task 0x%p\n", task);
res = sas_scsi_find_task(task);
@@ -437,11 +514,15 @@ Again:
SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
task);
task->task_done(task);
+ if (need_reset)
+ try_to_reset_cmd_device(shost, cmd);
continue;
case TASK_IS_ABORTED:
SAS_DPRINTK("%s: task 0x%p is aborted\n",
__FUNCTION__, task);
task->task_done(task);
+ if (need_reset)
+ try_to_reset_cmd_device(shost, cmd);
continue;
case TASK_IS_AT_LU:
SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
@@ -452,11 +533,14 @@ Again:
SAS_ADDR(task->dev),
cmd->device->lun);
task->task_done(task);
- sas_scsi_clear_queue_lu(&error_q, cmd);
+ if (need_reset)
+ try_to_reset_cmd_device(shost, cmd);
+ sas_scsi_clear_queue_lu(work_q, cmd);
goto Again;
}
/* fallthrough */
case TASK_IS_NOT_AT_LU:
+ case TASK_ABORT_FAILED:
SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
task);
tmf_resp = sas_recover_I_T(task->dev);
@@ -464,7 +548,9 @@ Again:
SAS_DPRINTK("I_T %016llx recovered\n",
SAS_ADDR(task->dev->sas_addr));
task->task_done(task);
- sas_scsi_clear_queue_I_T(&error_q, task->dev);
+ if (need_reset)
+ try_to_reset_cmd_device(shost, cmd);
+ sas_scsi_clear_queue_I_T(work_q, task->dev);
goto Again;
}
/* Hammer time :-) */
@@ -477,7 +563,9 @@ Again:
SAS_DPRINTK("clear nexus port:%d "
"succeeded\n", port->id);
task->task_done(task);
- sas_scsi_clear_queue_port(&error_q,
+ if (need_reset)
+ try_to_reset_cmd_device(shost, cmd);
+ sas_scsi_clear_queue_port(work_q,
port);
goto Again;
}
@@ -489,6 +577,8 @@ Again:
SAS_DPRINTK("clear nexus ha "
"succeeded\n");
task->task_done(task);
+ if (need_reset)
+ try_to_reset_cmd_device(shost, cmd);
goto out;
}
}
@@ -502,20 +592,54 @@ Again:
cmd->device->lun);
task->task_done(task);
+ if (need_reset)
+ try_to_reset_cmd_device(shost, cmd);
goto clear_q;
}
}
out:
- scsi_eh_flush_done_q(&ha->eh_done_q);
- SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
- return;
+ return list_empty(work_q);
clear_q:
SAS_DPRINTK("--- Exit %s -- clear_q\n", __FUNCTION__);
- list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
+ list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
struct sas_task *task = TO_SAS_TASK(cmd);
list_del_init(&cmd->eh_entry);
task->task_done(task);
}
+ return list_empty(work_q);
+}
+
+void sas_scsi_recover_host(struct Scsi_Host *shost)
+{
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ unsigned long flags;
+ LIST_HEAD(eh_work_q);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_splice_init(&shost->eh_cmd_q, &eh_work_q);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ SAS_DPRINTK("Enter %s\n", __FUNCTION__);
+ /*
+ * Deal with commands that still have SAS tasks (i.e. they didn't
+ * complete via the normal sas_task completion mechanism)
+ */
+ if (sas_eh_handle_sas_errors(shost, &eh_work_q, &ha->eh_done_q))
+ goto out;
+
+ /*
+ * Now deal with SCSI commands that completed ok but have a an error
+ * code (and hopefully sense data) attached. This is roughly what
+ * scsi_unjam_host does, but we skip scsi_eh_abort_cmds because any
+ * command we see here has no sas_task and is thus unknown to the HA.
+ */
+ if (!scsi_eh_get_sense(&eh_work_q, &ha->eh_done_q))
+ scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q);
+
+out:
+ scsi_eh_flush_done_q(&ha->eh_done_q);
+ SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
+ return;
}
enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
@@ -524,24 +648,30 @@ enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
unsigned long flags;
if (!task) {
- SAS_DPRINTK("command 0x%p, task 0x%p, gone: EH_HANDLED\n",
- cmd, task);
- return EH_HANDLED;
+ cmd->timeout_per_command /= 2;
+ SAS_DPRINTK("command 0x%p, task 0x%p, gone: %s\n",
+ cmd, task, (cmd->timeout_per_command ?
+ "EH_RESET_TIMER" : "EH_NOT_HANDLED"));
+ if (!cmd->timeout_per_command)
+ return EH_NOT_HANDLED;
+ return EH_RESET_TIMER;
}
spin_lock_irqsave(&task->task_state_lock, flags);
- if (task->task_state_flags & SAS_TASK_INITIATOR_ABORTED) {
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- SAS_DPRINTK("command 0x%p, task 0x%p, aborted by initiator: "
- "EH_NOT_HANDLED\n", cmd, task);
- return EH_NOT_HANDLED;
- }
+ BUG_ON(task->task_state_flags & SAS_TASK_STATE_ABORTED);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
cmd, task);
return EH_HANDLED;
}
+ if (!(task->task_state_flags & SAS_TASK_AT_INITIATOR)) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("command 0x%p, task 0x%p, not at initiator: "
+ "EH_RESET_TIMER\n",
+ cmd, task);
+ return EH_RESET_TIMER;
+ }
task->task_state_flags |= SAS_TASK_STATE_ABORTED;
spin_unlock_irqrestore(&task->task_state_lock, flags);
@@ -557,8 +687,9 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
struct domain_device *found_dev = NULL;
int i;
+ unsigned long flags;
- spin_lock(&ha->phy_port_lock);
+ spin_lock_irqsave(&ha->phy_port_lock, flags);
for (i = 0; i < ha->num_phys; i++) {
struct asd_sas_port *port = ha->sas_port[i];
struct domain_device *dev;
@@ -574,7 +705,7 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
spin_unlock(&port->dev_list_lock);
}
found:
- spin_unlock(&ha->phy_port_lock);
+ spin_unlock_irqrestore(&ha->phy_port_lock, flags);
return found_dev;
}
@@ -623,6 +754,8 @@ int sas_slave_configure(struct scsi_device *scsi_dev)
scsi_deactivate_tcq(scsi_dev, 1);
}
+ scsi_dev->allow_restart = 1;
+
return 0;
}
@@ -799,46 +932,42 @@ void sas_shutdown_queue(struct sas_ha_struct *sas_ha)
spin_unlock_irqrestore(&core->task_queue_lock, flags);
}
-static int do_sas_task_abort(struct sas_task *task)
+/*
+ * Call the LLDD task abort routine directly. This function is intended for
+ * use by upper layers that need to tell the LLDD to abort a task.
+ */
+int __sas_task_abort(struct sas_task *task)
{
- struct scsi_cmnd *sc = task->uldd_task;
struct sas_internal *si =
to_sas_internal(task->dev->port->ha->core.shost->transportt);
unsigned long flags;
int res;
spin_lock_irqsave(&task->task_state_lock, flags);
- if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
+ task->task_state_flags & SAS_TASK_STATE_DONE) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
- SAS_DPRINTK("%s: Task %p already aborted.\n", __FUNCTION__,
+ SAS_DPRINTK("%s: Task %p already finished.\n", __FUNCTION__,
task);
return 0;
}
-
- task->task_state_flags |= SAS_TASK_INITIATOR_ABORTED;
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
- task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
spin_unlock_irqrestore(&task->task_state_lock, flags);
if (!si->dft->lldd_abort_task)
return -ENODEV;
res = si->dft->lldd_abort_task(task);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
if ((task->task_state_flags & SAS_TASK_STATE_DONE) ||
(res == TMF_RESP_FUNC_COMPLETE))
{
- /* SMP commands don't have scsi_cmds(?) */
- if (!sc) {
- task->task_done(task);
- return 0;
- }
- scsi_req_abort_cmd(sc);
- scsi_schedule_eh(sc->device->host);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ task->task_done(task);
return 0;
}
- spin_lock_irqsave(&task->task_state_lock, flags);
- task->task_state_flags &= ~SAS_TASK_INITIATOR_ABORTED;
if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
spin_unlock_irqrestore(&task->task_state_lock, flags);
@@ -846,17 +975,24 @@ static int do_sas_task_abort(struct sas_task *task)
return -EAGAIN;
}
-void sas_task_abort(struct work_struct *work)
+/*
+ * Tell an upper layer that it needs to initiate an abort for a given task.
+ * This should only ever be called by an LLDD.
+ */
+void sas_task_abort(struct sas_task *task)
{
- struct sas_task *task =
- container_of(work, struct sas_task, abort_work);
- int i;
+ struct scsi_cmnd *sc = task->uldd_task;
- for (i = 0; i < 5; i++)
- if (!do_sas_task_abort(task))
+ /* Escape for libsas internal commands */
+ if (!sc) {
+ if (!del_timer(&task->timer))
return;
+ task->timer.function(task->timer.data);
+ return;
+ }
- SAS_DPRINTK("%s: Could not kill task!\n", __FUNCTION__);
+ scsi_req_abort_cmd(sc);
+ scsi_schedule_eh(sc->device->host);
}
EXPORT_SYMBOL_GPL(sas_queuecommand);
@@ -866,5 +1002,9 @@ EXPORT_SYMBOL_GPL(sas_slave_destroy);
EXPORT_SYMBOL_GPL(sas_change_queue_depth);
EXPORT_SYMBOL_GPL(sas_change_queue_type);
EXPORT_SYMBOL_GPL(sas_bios_param);
+EXPORT_SYMBOL_GPL(__sas_task_abort);
EXPORT_SYMBOL_GPL(sas_task_abort);
EXPORT_SYMBOL_GPL(sas_phy_reset);
+EXPORT_SYMBOL_GPL(sas_phy_enable);
+EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
+EXPORT_SYMBOL_GPL(sas_eh_bus_reset_handler);
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index 3052869f51f..170399ef06f 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -748,7 +748,7 @@ typedef struct {
/**
- * private_bios_data - bios private data for boot devices
+ * struct private_bios_data - bios private data for boot devices
* @geometry : bits 0-3 - BIOS geometry, 0x0001 - 1GB, 0x0010 - 2GB,
* 0x1000 - 8GB, Others values are invalid
* @unused : bits 4-7 are unused
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h
index b50e27e6602..26e1e6c5565 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -46,17 +46,17 @@
/**
* scb_t - scsi command control block
- * @param ccb : command control block for individual driver
- * @param list : list of control blocks
- * @param gp : general purpose field for LLDs
- * @param sno : all SCBs have a serial number
- * @param scp : associated scsi command
- * @param state : current state of scb
- * @param dma_dir : direction of data transfer
- * @param dma_type : transfer with sg list, buffer, or no data transfer
- * @param dev_channel : actual channel on the device
- * @param dev_target : actual target on the device
- * @param status : completion status
+ * @ccb : command control block for individual driver
+ * @list : list of control blocks
+ * @gp : general purpose field for LLDs
+ * @sno : all SCBs have a serial number
+ * @scp : associated scsi command
+ * @state : current state of scb
+ * @dma_dir : direction of data transfer
+ * @dma_type : transfer with sg list, buffer, or no data transfer
+ * @dev_channel : actual channel on the device
+ * @dev_target : actual target on the device
+ * @status : completion status
*
* This is our central data structure to issue commands the each driver.
* Driver specific data structures are maintained in the ccb field.
@@ -99,42 +99,42 @@ typedef struct {
/**
* struct adapter_t - driver's initialization structure
- * @param dpc_h : tasklet handle
- * @param pdev : pci configuration pointer for kernel
- * @param host : pointer to host structure of mid-layer
- * @param lock : synchronization lock for mid-layer and driver
- * @param quiescent : driver is quiescent for now.
- * @param outstanding_cmds : number of commands pending in the driver
- * @param kscb_list : pointer to the bulk of SCBs pointers for IO
- * @param kscb_pool : pool of free scbs for IO
- * @param kscb_pool_lock : lock for pool of free scbs
- * @param pend_list : pending commands list
- * @param pend_list_lock : exlusion lock for pending commands list
- * @param completed_list : list of completed commands
- * @param completed_list_lock : exclusion lock for list of completed commands
- * @param sglen : max sg elements supported
- * @param device_ids : to convert kernel device addr to our devices.
- * @param raid_device : raid adapter specific pointer
- * @param max_channel : maximum channel number supported - inclusive
- * @param max_target : max target supported - inclusive
- * @param max_lun : max lun supported - inclusive
- * @param unique_id : unique identifier for each adapter
- * @param irq : IRQ for this adapter
- * @param ito : internal timeout value, (-1) means no timeout
- * @param ibuf : buffer to issue internal commands
- * @param ibuf_dma_h : dma handle for the above buffer
- * @param uscb_list : SCB pointers for user cmds, common mgmt module
- * @param uscb_pool : pool of SCBs for user commands
- * @param uscb_pool_lock : exclusion lock for these SCBs
- * @param max_cmds : max outstanding commands
- * @param fw_version : firmware version
- * @param bios_version : bios version
- * @param max_cdb_sz : biggest CDB size supported.
- * @param ha : is high availability present - clustering
- * @param init_id : initiator ID, the default value should be 7
- * @param max_sectors : max sectors per request
- * @param cmd_per_lun : max outstanding commands per LUN
- * @param being_detached : set when unloading, no more mgmt calls
+ * @aram dpc_h : tasklet handle
+ * @pdev : pci configuration pointer for kernel
+ * @host : pointer to host structure of mid-layer
+ * @lock : synchronization lock for mid-layer and driver
+ * @quiescent : driver is quiescent for now.
+ * @outstanding_cmds : number of commands pending in the driver
+ * @kscb_list : pointer to the bulk of SCBs pointers for IO
+ * @kscb_pool : pool of free scbs for IO
+ * @kscb_pool_lock : lock for pool of free scbs
+ * @pend_list : pending commands list
+ * @pend_list_lock : exclusion lock for pending commands list
+ * @completed_list : list of completed commands
+ * @completed_list_lock : exclusion lock for list of completed commands
+ * @sglen : max sg elements supported
+ * @device_ids : to convert kernel device addr to our devices.
+ * @raid_device : raid adapter specific pointer
+ * @max_channel : maximum channel number supported - inclusive
+ * @max_target : max target supported - inclusive
+ * @max_lun : max lun supported - inclusive
+ * @unique_id : unique identifier for each adapter
+ * @irq : IRQ for this adapter
+ * @ito : internal timeout value, (-1) means no timeout
+ * @ibuf : buffer to issue internal commands
+ * @ibuf_dma_h : dma handle for the above buffer
+ * @uscb_list : SCB pointers for user cmds, common mgmt module
+ * @uscb_pool : pool of SCBs for user commands
+ * @uscb_pool_lock : exclusion lock for these SCBs
+ * @max_cmds : max outstanding commands
+ * @fw_version : firmware version
+ * @bios_version : bios version
+ * @max_cdb_sz : biggest CDB size supported.
+ * @ha : is high availability present - clustering
+ * @init_id : initiator ID, the default value should be 7
+ * @max_sectors : max sectors per request
+ * @cmd_per_lun : max outstanding commands per LUN
+ * @being_detached : set when unloading, no more mgmt calls
*
*
* mraid_setup_device_map() can be called anytime after the device map is
@@ -211,23 +211,23 @@ typedef struct {
#define SCP2ADAPTER(scp) (adapter_t *)SCSIHOST2ADAP(SCP2HOST(scp))
-/**
- * MRAID_GET_DEVICE_MAP - device ids
- * @param adp - Adapter's soft state
- * @param scp - mid-layer scsi command pointer
- * @param p_chan - physical channel on the controller
- * @param target - target id of the device or logical drive number
- * @param islogical - set if the command is for the logical drive
- *
- * Macro to retrieve information about device class, logical or physical and
- * the corresponding physical channel and target or logical drive number
- **/
#define MRAID_IS_LOGICAL(adp, scp) \
(SCP2CHANNEL(scp) == (adp)->max_channel) ? 1 : 0
#define MRAID_IS_LOGICAL_SDEV(adp, sdev) \
(sdev->channel == (adp)->max_channel) ? 1 : 0
+/**
+ * MRAID_GET_DEVICE_MAP - device ids
+ * @adp : adapter's soft state
+ * @scp : mid-layer scsi command pointer
+ * @p_chan : physical channel on the controller
+ * @target : target id of the device or logical drive number
+ * @islogical : set if the command is for the logical drive
+ *
+ * Macro to retrieve information about device class, logical or physical and
+ * the corresponding physical channel and target or logical drive number
+ */
#define MRAID_GET_DEVICE_MAP(adp, scp, p_chan, target, islogical) \
/* \
* Is the request coming for the virtual channel \
@@ -271,10 +271,10 @@ typedef struct {
#define ASSERT(expression)
#endif
-/*
+/**
* struct mraid_pci_blk - structure holds DMA memory block info
- * @param vaddr : virtual address to a memory block
- * @param dma_addr : DMA handle to a memory block
+ * @vaddr : virtual address to a memory block
+ * @dma_addr : DMA handle to a memory block
*
* This structure is filled up for the caller. It is the responsibilty of the
* caller to allocate this array big enough to store addresses for all
diff --git a/drivers/scsi/megaraid/megaraid_ioctl.h b/drivers/scsi/megaraid/megaraid_ioctl.h
index b8aa34202ec..706fa05a187 100644
--- a/drivers/scsi/megaraid/megaraid_ioctl.h
+++ b/drivers/scsi/megaraid/megaraid_ioctl.h
@@ -22,23 +22,23 @@
#include "mbox_defs.h"
+/*
+ * console messages debug levels
+ */
+#define CL_ANN 0 /* print unconditionally, announcements */
+#define CL_DLEVEL1 1 /* debug level 1, informative */
+#define CL_DLEVEL2 2 /* debug level 2, verbose */
+#define CL_DLEVEL3 3 /* debug level 3, very verbose */
+
/**
* con_log() - console log routine
- * @param level : indicates the severity of the message.
- * @fparam mt : format string
+ * @level : indicates the severity of the message.
+ * @fmt : format string
*
* con_log displays the error messages on the console based on the current
* debug level. Also it attaches the appropriate kernel severity level with
* the message.
- *
- *
- * consolge messages debug levels
*/
-#define CL_ANN 0 /* print unconditionally, announcements */
-#define CL_DLEVEL1 1 /* debug level 1, informative */
-#define CL_DLEVEL2 2 /* debug level 2, verbose */
-#define CL_DLEVEL3 3 /* debug level 3, very verbose */
-
#define con_log(level, fmt) if (LSI_DBGLVL >= level) printk fmt;
/*
@@ -157,14 +157,14 @@ typedef struct uioc {
/**
* struct mraid_hba_info - information about the controller
*
- * @param pci_vendor_id : PCI vendor id
- * @param pci_device_id : PCI device id
- * @param subsystem_vendor_id : PCI subsystem vendor id
- * @param subsystem_device_id : PCI subsystem device id
- * @param baseport : base port of hba memory
- * @param pci_bus : PCI bus
- * @param pci_dev_fn : PCI device/function values
- * @param irq : interrupt vector for the device
+ * @pci_vendor_id : PCI vendor id
+ * @pci_device_id : PCI device id
+ * @subsystem_vendor_id : PCI subsystem vendor id
+ * @subsystem_device_id : PCI subsystem device id
+ * @baseport : base port of hba memory
+ * @pci_bus : PCI bus
+ * @pci_dev_fn : PCI device/function values
+ * @irq : interrupt vector for the device
*
* Extended information of 256 bytes about the controller. Align on the single
* byte boundary so that 32-bit applications can be run on 64-bit platform
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 7bac86dda88..04d0b6918c6 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -10,13 +10,13 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_mbox.c
- * Version : v2.20.4.9 (Jul 16 2006)
+ * Version : v2.20.5.1 (Nov 16 2006)
*
* Authors:
- * Atul Mukker <Atul.Mukker@lsil.com>
- * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
- * Manoj Jose <Manoj.Jose@lsil.com>
- * Seokmann Ju <Seokmann.Ju@lsil.com>
+ * Atul Mukker <Atul.Mukker@lsi.com>
+ * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com>
+ * Manoj Jose <Manoj.Jose@lsi.com>
+ * Seokmann Ju
*
* List of supported controllers
*
@@ -107,6 +107,7 @@ static int megaraid_mbox_support_random_del(adapter_t *);
static int megaraid_mbox_get_max_sg(adapter_t *);
static void megaraid_mbox_enum_raid_scsi(adapter_t *);
static void megaraid_mbox_flush_cache(adapter_t *);
+static int megaraid_mbox_fire_sync_cmd(adapter_t *);
static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
static void megaraid_mbox_setup_device_map(adapter_t *);
@@ -137,7 +138,7 @@ static int wait_till_fw_empty(adapter_t *);
-MODULE_AUTHOR("sju@lsil.com");
+MODULE_AUTHOR("megaraidlinux@lsi.com");
MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGARAID_VERSION);
@@ -146,7 +147,7 @@ MODULE_VERSION(MEGARAID_VERSION);
* ### modules parameters for driver ###
*/
-/**
+/*
* Set to enable driver to expose unconfigured disk to kernel
*/
static int megaraid_expose_unconf_disks = 0;
@@ -154,7 +155,7 @@ module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0);
MODULE_PARM_DESC(unconf_disks,
"Set to expose unconfigured disks to kernel (default=0)");
-/**
+/*
* driver wait time if the adapter's mailbox is busy
*/
static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT;
@@ -162,7 +163,7 @@ module_param_named(busy_wait, max_mbox_busy_wait, int, 0);
MODULE_PARM_DESC(busy_wait,
"Max wait for mailbox in microseconds if busy (default=10)");
-/**
+/*
* number of sectors per IO command
*/
static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS;
@@ -170,7 +171,7 @@ module_param_named(max_sectors, megaraid_max_sectors, int, 0);
MODULE_PARM_DESC(max_sectors,
"Maximum number of sectors per IO command (default=128)");
-/**
+/*
* number of commands per logical unit
*/
static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN;
@@ -179,7 +180,7 @@ MODULE_PARM_DESC(cmd_per_lun,
"Maximum number of commands per logical unit (default=64)");
-/**
+/*
* Fast driver load option, skip scanning for physical devices during load.
* This would result in non-disk devices being skipped during driver load
* time. These can be later added though, using /proc/scsi/scsi
@@ -190,7 +191,7 @@ MODULE_PARM_DESC(fast_load,
"Faster loading of the driver, skips physical devices! (default=0)");
-/**
+/*
* mraid_debug level - threshold for amount of information to be displayed by
* the driver. This level can be changed through modules parameters, ioctl or
* sysfs/proc interface. By default, print the announcement messages only.
@@ -337,7 +338,7 @@ static struct device_attribute *megaraid_sdev_attrs[] = {
*
* Return value:
* actual depth set
- **/
+ */
static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
if (qdepth > MBOX_MAX_SCSI_CMDS)
@@ -369,8 +370,8 @@ static struct scsi_host_template megaraid_template_g = {
* megaraid_init - module load hook
*
* We register ourselves as hotplug enabled module and let PCI subsystem
- * discover our adaters
- **/
+ * discover our adapters.
+ */
static int __init
megaraid_init(void)
{
@@ -405,7 +406,7 @@ megaraid_init(void)
/**
* megaraid_exit - driver unload entry point
*
- * We simply unwrap the megaraid_init routine here
+ * We simply unwrap the megaraid_init routine here.
*/
static void __exit
megaraid_exit(void)
@@ -421,12 +422,12 @@ megaraid_exit(void)
/**
* megaraid_probe_one - PCI hotplug entry point
- * @param pdev : handle to this controller's PCI configuration space
- * @param id : pci device id of the class of controllers
+ * @pdev : handle to this controller's PCI configuration space
+ * @id : pci device id of the class of controllers
*
* This routine should be called whenever a new adapter is detected by the
* PCI hotplug susbsytem.
- **/
+ */
static int __devinit
megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -542,16 +543,15 @@ out_probe_one:
/**
- * megaraid_detach_one - release the framework resources and call LLD release
- * routine
- * @param pdev : handle for our PCI cofiguration space
+ * megaraid_detach_one - release framework resources and call LLD release routine
+ * @pdev : handle for our PCI cofiguration space
*
* This routine is called during driver unload. We free all the allocated
* resources and call the corresponding LLD so that it can also release all
* its resources.
*
- * This routine is also called from the PCI hotplug system
- **/
+ * This routine is also called from the PCI hotplug system.
+ */
static void
megaraid_detach_one(struct pci_dev *pdev)
{
@@ -615,9 +615,9 @@ megaraid_detach_one(struct pci_dev *pdev)
/**
* megaraid_mbox_shutdown - PCI shutdown for megaraid HBA
- * @param device : generice driver model device
+ * @pdev : generic driver model device
*
- * Shutdown notification, perform flush cache
+ * Shutdown notification, perform flush cache.
*/
static void
megaraid_mbox_shutdown(struct pci_dev *pdev)
@@ -643,10 +643,10 @@ megaraid_mbox_shutdown(struct pci_dev *pdev)
/**
* megaraid_io_attach - attach a device with the IO subsystem
- * @param adapter : controller's soft state
+ * @adapter : controller's soft state
*
- * Attach this device with the IO subsystem
- **/
+ * Attach this device with the IO subsystem.
+ */
static int
megaraid_io_attach(adapter_t *adapter)
{
@@ -695,10 +695,10 @@ megaraid_io_attach(adapter_t *adapter)
/**
* megaraid_io_detach - detach a device from the IO subsystem
- * @param adapter : controller's soft state
+ * @adapter : controller's soft state
*
- * Detach this device from the IO subsystem
- **/
+ * Detach this device from the IO subsystem.
+ */
static void
megaraid_io_detach(adapter_t *adapter)
{
@@ -722,13 +722,13 @@ megaraid_io_detach(adapter_t *adapter)
/**
* megaraid_init_mbox - initialize controller
- * @param adapter - our soft state
+ * @adapter : our soft state
*
- * . Allocate 16-byte aligned mailbox memory for firmware handshake
- * . Allocate controller's memory resources
- * . Find out all initialization data
- * . Allocate memory required for all the commands
- * . Use internal library of FW routines, build up complete soft state
+ * - Allocate 16-byte aligned mailbox memory for firmware handshake
+ * - Allocate controller's memory resources
+ * - Find out all initialization data
+ * - Allocate memory required for all the commands
+ * - Use internal library of FW routines, build up complete soft state
*/
static int __devinit
megaraid_init_mbox(adapter_t *adapter)
@@ -779,33 +779,39 @@ megaraid_init_mbox(adapter_t *adapter)
goto out_release_regions;
}
- //
- // Setup the rest of the soft state using the library of FW routines
- //
+ /* initialize the mutual exclusion lock for the mailbox */
+ spin_lock_init(&raid_dev->mailbox_lock);
- // request IRQ and register the interrupt service routine
+ /* allocate memory required for commands */
+ if (megaraid_alloc_cmd_packets(adapter) != 0)
+ goto out_iounmap;
+
+ /*
+ * Issue SYNC cmd to flush the pending cmds in the adapter
+ * and initialize its internal state
+ */
+
+ if (megaraid_mbox_fire_sync_cmd(adapter))
+ con_log(CL_ANN, ("megaraid: sync cmd failed\n"));
+
+ /*
+ * Setup the rest of the soft state using the library of
+ * FW routines
+ */
+
+ /* request IRQ and register the interrupt service routine */
if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid",
adapter)) {
con_log(CL_ANN, (KERN_WARNING
"megaraid: Couldn't register IRQ %d!\n", adapter->irq));
+ goto out_alloc_cmds;
- goto out_iounmap;
- }
-
-
- // initialize the mutual exclusion lock for the mailbox
- spin_lock_init(&raid_dev->mailbox_lock);
-
- // allocate memory required for commands
- if (megaraid_alloc_cmd_packets(adapter) != 0) {
- goto out_free_irq;
}
// Product info
- if (megaraid_mbox_product_info(adapter) != 0) {
- goto out_alloc_cmds;
- }
+ if (megaraid_mbox_product_info(adapter) != 0)
+ goto out_free_irq;
// Do we support extended CDBs
adapter->max_cdb_sz = 10;
@@ -874,9 +880,8 @@ megaraid_init_mbox(adapter_t *adapter)
* Allocate resources required to issue FW calls, when sysfs is
* accessed
*/
- if (megaraid_sysfs_alloc_resources(adapter) != 0) {
- goto out_alloc_cmds;
- }
+ if (megaraid_sysfs_alloc_resources(adapter) != 0)
+ goto out_free_irq;
// Set the DMA mask to 64-bit. All supported controllers as capable of
// DMA in this range
@@ -920,10 +925,10 @@ megaraid_init_mbox(adapter_t *adapter)
out_free_sysfs_res:
megaraid_sysfs_free_resources(adapter);
-out_alloc_cmds:
- megaraid_free_cmd_packets(adapter);
out_free_irq:
free_irq(adapter->irq, adapter);
+out_alloc_cmds:
+ megaraid_free_cmd_packets(adapter);
out_iounmap:
iounmap(raid_dev->baseaddr);
out_release_regions:
@@ -937,7 +942,7 @@ out_free_raid_dev:
/**
* megaraid_fini_mbox - undo controller initialization
- * @param adapter : our soft state
+ * @adapter : our soft state
*/
static void
megaraid_fini_mbox(adapter_t *adapter)
@@ -967,12 +972,12 @@ megaraid_fini_mbox(adapter_t *adapter)
/**
* megaraid_alloc_cmd_packets - allocate shared mailbox
- * @param adapter : soft state of the raid controller
+ * @adapter : soft state of the raid controller
*
* Allocate and align the shared mailbox. This maibox is used to issue
* all the commands. For IO based controllers, the mailbox is also regsitered
* with the FW. Allocate memory for all commands as well.
- * This is our big allocator
+ * This is our big allocator.
*/
static int
megaraid_alloc_cmd_packets(adapter_t *adapter)
@@ -1132,9 +1137,9 @@ out_free_common_mbox:
/**
* megaraid_free_cmd_packets - free memory
- * @param adapter : soft state of the raid controller
+ * @adapter : soft state of the raid controller
*
- * Release memory resources allocated for commands
+ * Release memory resources allocated for commands.
*/
static void
megaraid_free_cmd_packets(adapter_t *adapter)
@@ -1156,10 +1161,10 @@ megaraid_free_cmd_packets(adapter_t *adapter)
/**
* megaraid_mbox_setup_dma_pools - setup dma pool for command packets
- * @param adapter : HBA soft state
+ * @adapter : HBA soft state
*
- * setup the dma pools for mailbox, passthru and extended passthru structures,
- * and scatter-gather lists
+ * Setup the dma pools for mailbox, passthru and extended passthru structures,
+ * and scatter-gather lists.
*/
static int
megaraid_mbox_setup_dma_pools(adapter_t *adapter)
@@ -1252,10 +1257,10 @@ fail_setup_dma_pool:
/**
* megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets
- * @param adapter : HBA soft state
+ * @adapter : HBA soft state
*
- * teardown the dma pool for mailbox, passthru and extended passthru
- * structures, and scatter-gather lists
+ * Teardown the dma pool for mailbox, passthru and extended passthru
+ * structures, and scatter-gather lists.
*/
static void
megaraid_mbox_teardown_dma_pools(adapter_t *adapter)
@@ -1300,10 +1305,11 @@ megaraid_mbox_teardown_dma_pools(adapter_t *adapter)
/**
* megaraid_alloc_scb - detach and return a scb from the free list
* @adapter : controller's soft state
+ * @scp : pointer to the scsi command to be executed
*
- * return the scb from the head of the free list. NULL if there are none
- * available
- **/
+ * Return the scb from the head of the free list. %NULL if there are none
+ * available.
+ */
static scb_t *
megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp)
{
@@ -1337,11 +1343,11 @@ megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp)
* @adapter : controller's soft state
* @scb : scb to be freed
*
- * return the scb back to the free list of scbs. The caller must 'flush' the
+ * Return the scb back to the free list of scbs. The caller must 'flush' the
* SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc.
* NOTE NOTE: Make sure the scb is not on any list before calling this
* routine.
- **/
+ */
static inline void
megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb)
{
@@ -1362,10 +1368,10 @@ megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb)
/**
* megaraid_mbox_mksgl - make the scatter-gather list
- * @adapter - controller's soft state
- * @scb - scsi control block
+ * @adapter : controller's soft state
+ * @scb : scsi control block
*
- * prepare the scatter-gather list
+ * Prepare the scatter-gather list.
*/
static int
megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb)
@@ -1435,10 +1441,10 @@ megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb)
/**
* mbox_post_cmd - issue a mailbox command
- * @adapter - controller's soft state
- * @scb - command to be issued
+ * @adapter : controller's soft state
+ * @scb : command to be issued
*
- * post the command to the controller if mailbox is availble.
+ * Post the command to the controller if mailbox is available.
*/
static int
mbox_post_cmd(adapter_t *adapter, scb_t *scb)
@@ -1518,7 +1524,7 @@ mbox_post_cmd(adapter_t *adapter, scb_t *scb)
* Queue entry point for mailbox based controllers.
*/
static int
-megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *))
+megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
{
adapter_t *adapter;
scb_t *scb;
@@ -1548,15 +1554,15 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *))
}
/**
- * megaraid_mbox_build_cmd - transform the mid-layer scsi command to megaraid
- * firmware lingua
- * @adapter - controller's soft state
- * @scp - mid-layer scsi command pointer
- * @busy - set if request could not be completed because of lack of
+ * megaraid_mbox_build_cmd - transform the mid-layer scsi commands
+ * @adapter : controller's soft state
+ * @scp : mid-layer scsi command pointer
+ * @busy : set if request could not be completed because of lack of
* resources
*
- * convert the command issued by mid-layer to format understood by megaraid
- * firmware. We also complete certain command without sending them to firmware
+ * Transform the mid-layer scsi command to megaraid firmware lingua.
+ * Convert the command issued by mid-layer to format understood by megaraid
+ * firmware. We also complete certain commands without sending them to firmware.
*/
static scb_t *
megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
@@ -1937,9 +1943,9 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
/**
* megaraid_mbox_runpendq - execute commands queued in the pending queue
* @adapter : controller's soft state
- * @scb : SCB to be queued in the pending list
+ * @scb_q : SCB to be queued in the pending list
*
- * scan the pending list for commands which are not yet issued and try to
+ * Scan the pending list for commands which are not yet issued and try to
* post to the controller. The SCB can be a null pointer, which would indicate
* no SCB to be queue, just try to execute the ones in the pending list.
*
@@ -2012,11 +2018,11 @@ megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q)
/**
* megaraid_mbox_prepare_pthru - prepare a command for physical devices
- * @adapter - pointer to controller's soft state
- * @scb - scsi control block
- * @scp - scsi command from the mid-layer
+ * @adapter : pointer to controller's soft state
+ * @scb : scsi control block
+ * @scp : scsi command from the mid-layer
*
- * prepare a command for the scsi physical devices
+ * Prepare a command for the scsi physical devices.
*/
static void
megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb,
@@ -2060,12 +2066,12 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb,
/**
* megaraid_mbox_prepare_epthru - prepare a command for physical devices
- * @adapter - pointer to controller's soft state
- * @scb - scsi control block
- * @scp - scsi command from the mid-layer
+ * @adapter : pointer to controller's soft state
+ * @scb : scsi control block
+ * @scp : scsi command from the mid-layer
*
- * prepare a command for the scsi physical devices. This rountine prepares
- * commands for devices which can take extended CDBs (>10 bytes)
+ * Prepare a command for the scsi physical devices. This rountine prepares
+ * commands for devices which can take extended CDBs (>10 bytes).
*/
static void
megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb,
@@ -2109,9 +2115,9 @@ megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb,
/**
* megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs
- * @adapter - controller's soft state
+ * @adapter : controller's soft state
*
- * Interrupt ackrowledgement sequence for memory mapped HBAs. Find out the
+ * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the
* completed command and put them on the completed list for later processing.
*
* Returns: 1 if the interrupt is valid, 0 otherwise
@@ -2224,9 +2230,8 @@ megaraid_ack_sequence(adapter_t *adapter)
/**
* megaraid_isr - isr for memory based mailbox based controllers
- * @irq - irq
- * @devp - pointer to our soft state
- * @regs - unused
+ * @irq : irq
+ * @devp : pointer to our soft state
*
* Interrupt service routine for memory-mapped mailbox controllers.
*/
@@ -2671,7 +2676,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp)
* the FW is still live, in which case the outstanding commands counter mut go
* down to 0. If that happens, also issue the reservation reset command to
* relinquish (possible) reservations on the logical drives connected to this
- * host
+ * host.
**/
static int
megaraid_reset_handler(struct scsi_cmnd *scp)
@@ -2823,11 +2828,11 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
/**
* mbox_post_sync_cmd() - blocking command to the mailbox based controllers
- * @adapter - controller's soft state
- * @raw_mbox - the mailbox
+ * @adapter : controller's soft state
+ * @raw_mbox : the mailbox
*
* Issue a scb in synchronous and non-interrupt mode for mailbox based
- * controllers
+ * controllers.
*/
static int
mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[])
@@ -2955,12 +2960,12 @@ blocked_mailbox:
/**
* mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers
- * @adapter - controller's soft state
- * @raw_mbox - the mailbox
+ * @adapter : controller's soft state
+ * @raw_mbox : the mailbox
*
* Issue a scb in synchronous and non-interrupt mode for mailbox based
* controllers. This is a faster version of the synchronous command and
- * therefore can be called in interrupt-context as well
+ * therefore can be called in interrupt-context as well.
*/
static int
mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
@@ -3008,10 +3013,10 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
/**
* megaraid_busywait_mbox() - Wait until the controller's mailbox is available
- * @raid_dev - RAID device (HBA) soft state
+ * @raid_dev : RAID device (HBA) soft state
*
- * wait until the controller's mailbox is available to accept more commands.
- * wait for at most 1 second
+ * Wait until the controller's mailbox is available to accept more commands.
+ * Wait for at most 1 second.
*/
static int
megaraid_busywait_mbox(mraid_device_t *raid_dev)
@@ -3032,9 +3037,9 @@ megaraid_busywait_mbox(mraid_device_t *raid_dev)
/**
* megaraid_mbox_product_info - some static information about the controller
- * @adapter - our soft state
+ * @adapter : our soft state
*
- * issue commands to the controller to grab some parameters required by our
+ * Issue commands to the controller to grab some parameters required by our
* caller.
*/
static int
@@ -3157,10 +3162,10 @@ megaraid_mbox_product_info(adapter_t *adapter)
/**
* megaraid_mbox_extended_cdb - check for support for extended CDBs
- * @adapter - soft state for the controller
+ * @adapter : soft state for the controller
*
- * this routine check whether the controller in question supports extended
- * ( > 10 bytes ) CDBs
+ * This routine check whether the controller in question supports extended
+ * ( > 10 bytes ) CDBs.
*/
static int
megaraid_mbox_extended_cdb(adapter_t *adapter)
@@ -3193,8 +3198,8 @@ megaraid_mbox_extended_cdb(adapter_t *adapter)
/**
* megaraid_mbox_support_ha - Do we support clustering
- * @adapter - soft state for the controller
- * @init_id - ID of the initiator
+ * @adapter : soft state for the controller
+ * @init_id : ID of the initiator
*
* Determine if the firmware supports clustering and the ID of the initiator.
*/
@@ -3236,9 +3241,9 @@ megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id)
/**
* megaraid_mbox_support_random_del - Do we support random deletion
- * @adapter - soft state for the controller
+ * @adapter : soft state for the controller
*
- * Determine if the firmware supports random deletion
+ * Determine if the firmware supports random deletion.
* Return: 1 is operation supported, 0 otherwise
*/
static int
@@ -3271,10 +3276,10 @@ megaraid_mbox_support_random_del(adapter_t *adapter)
/**
* megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware
- * @adapter - soft state for the controller
+ * @adapter : soft state for the controller
*
* Find out the maximum number of scatter-gather elements supported by the
- * firmware
+ * firmware.
*/
static int
megaraid_mbox_get_max_sg(adapter_t *adapter)
@@ -3311,10 +3316,10 @@ megaraid_mbox_get_max_sg(adapter_t *adapter)
/**
* megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels
- * @adapter - soft state for the controller
+ * @adapter : soft state for the controller
*
- * Enumerate the RAID and SCSI channels for ROMB platoforms so that channels
- * can be exported as regular SCSI channels
+ * Enumerate the RAID and SCSI channels for ROMB platforms so that channels
+ * can be exported as regular SCSI channels.
*/
static void
megaraid_mbox_enum_raid_scsi(adapter_t *adapter)
@@ -3348,9 +3353,9 @@ megaraid_mbox_enum_raid_scsi(adapter_t *adapter)
/**
* megaraid_mbox_flush_cache - flush adapter and disks cache
- * @param adapter : soft state for the controller
+ * @adapter : soft state for the controller
*
- * Flush adapter cache followed by disks cache
+ * Flush adapter cache followed by disks cache.
*/
static void
megaraid_mbox_flush_cache(adapter_t *adapter)
@@ -3380,13 +3385,91 @@ megaraid_mbox_flush_cache(adapter_t *adapter)
/**
+ * megaraid_mbox_fire_sync_cmd - fire the sync cmd
+ * @adapter : soft state for the controller
+ *
+ * Clears the pending cmds in FW and reinits its RAID structs.
+ */
+static int
+megaraid_mbox_fire_sync_cmd(adapter_t *adapter)
+{
+ mbox_t *mbox;
+ uint8_t raw_mbox[sizeof(mbox_t)];
+ mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
+ mbox64_t *mbox64;
+ int status = 0;
+ int i;
+ uint32_t dword;
+
+ mbox = (mbox_t *)raw_mbox;
+
+ memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
+
+ raw_mbox[0] = 0xFF;
+
+ mbox64 = raid_dev->mbox64;
+ mbox = raid_dev->mbox;
+
+ /* Wait until mailbox is free */
+ if (megaraid_busywait_mbox(raid_dev) != 0) {
+ status = 1;
+ goto blocked_mailbox;
+ }
+
+ /* Copy mailbox data into host structure */
+ memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
+ mbox->cmdid = 0xFE;
+ mbox->busy = 1;
+ mbox->poll = 0;
+ mbox->ack = 0;
+ mbox->numstatus = 0;
+ mbox->status = 0;
+
+ wmb();
+ WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
+
+ /* Wait for maximum 1 min for status to post.
+ * If the Firmware SUPPORTS the ABOVE COMMAND,
+ * mbox->cmd will be set to 0
+ * else
+ * the firmware will reject the command with
+ * mbox->numstatus set to 1
+ */
+
+ i = 0;
+ status = 0;
+ while (!mbox->numstatus && mbox->cmd == 0xFF) {
+ rmb();
+ msleep(1);
+ i++;
+ if (i > 1000 * 60) {
+ status = 1;
+ break;
+ }
+ }
+ if (mbox->numstatus == 1)
+ status = 1; /*cmd not supported*/
+
+ /* Check for interrupt line */
+ dword = RDOUTDOOR(raid_dev);
+ WROUTDOOR(raid_dev, dword);
+ WRINDOOR(raid_dev,2);
+
+ return status;
+
+blocked_mailbox:
+ con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n"));
+ return status;
+}
+
+/**
* megaraid_mbox_display_scb - display SCB information, mostly debug purposes
- * @param adapter : controllers' soft state
- * @param scb : SCB to be displayed
- * @param level : debug level for console print
+ * @adapter : controller's soft state
+ * @scb : SCB to be displayed
+ * @level : debug level for console print
*
* Diplay information about the given SCB iff the current debug level is
- * verbose
+ * verbose.
*/
static void
megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
@@ -3434,7 +3517,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
* scsi addresses and megaraid scsi and logical drive addresses. We export
* scsi devices on their actual addresses, whereas the logical drives are
* exported on a virtual scsi channel.
- **/
+ */
static void
megaraid_mbox_setup_device_map(adapter_t *adapter)
{
@@ -3472,7 +3555,7 @@ megaraid_mbox_setup_device_map(adapter_t *adapter)
/**
* megaraid_cmm_register - register with the mangement module
- * @param adapter : HBA soft state
+ * @adapter : HBA soft state
*
* Register with the management module, which allows applications to issue
* ioctl calls to the drivers. This interface is used by the management module
@@ -3562,11 +3645,11 @@ megaraid_cmm_register(adapter_t *adapter)
/**
* megaraid_cmm_unregister - un-register with the mangement module
- * @param adapter : HBA soft state
+ * @adapter : HBA soft state
*
* Un-register with the management module.
* FIXME: mgmt module must return failure for unregister if it has pending
- * commands in LLD
+ * commands in LLD.
*/
static int
megaraid_cmm_unregister(adapter_t *adapter)
@@ -3579,9 +3662,9 @@ megaraid_cmm_unregister(adapter_t *adapter)
/**
* megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD
- * @param drvr_data : LLD specific data
- * @param kioc : CMM interface packet
- * @param action : command action
+ * @drvr_data : LLD specific data
+ * @kioc : CMM interface packet
+ * @action : command action
*
* This routine is invoked whenever the Common Mangement Module (CMM) has a
* command for us. The 'action' parameter specifies if this is a new command
@@ -3634,8 +3717,8 @@ megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action)
/**
* megaraid_mbox_mm_command - issues commands routed through CMM
- * @param adapter : HBA soft state
- * @param kioc : management command packet
+ * @adapter : HBA soft state
+ * @kioc : management command packet
*
* Issues commands, which are routed through the management module.
*/
@@ -3804,8 +3887,8 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
/**
* gather_hbainfo - HBA characteristics for the applications
- * @param adapter : HBA soft state
- * @param hinfo : pointer to the caller's host info strucuture
+ * @adapter : HBA soft state
+ * @hinfo : pointer to the caller's host info strucuture
*/
static int
gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo)
@@ -3839,16 +3922,15 @@ gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo)
/**
* megaraid_sysfs_alloc_resources - allocate sysfs related resources
+ * @adapter : controller's soft state
*
* Allocate packets required to issue FW calls whenever the sysfs attributes
* are read. These attributes would require up-to-date information from the
* FW. Also set up resources for mutual exclusion to share these resources and
* the wait queue.
*
- * @param adapter : controller's soft state
- *
- * @return 0 on success
- * @return -ERROR_CODE on failure
+ * Return 0 on success.
+ * Return -ERROR_CODE on failure.
*/
static int
megaraid_sysfs_alloc_resources(adapter_t *adapter)
@@ -3885,10 +3967,9 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter)
/**
* megaraid_sysfs_free_resources - free sysfs related resources
+ * @adapter : controller's soft state
*
* Free packets allocated for sysfs FW commands
- *
- * @param adapter : controller's soft state
*/
static void
megaraid_sysfs_free_resources(adapter_t *adapter)
@@ -3907,10 +3988,9 @@ megaraid_sysfs_free_resources(adapter_t *adapter)
/**
* megaraid_sysfs_get_ldmap_done - callback for get ldmap
+ * @uioc : completed packet
*
* Callback routine called in the ISR/tasklet context for get ldmap call
- *
- * @param uioc : completed packet
*/
static void
megaraid_sysfs_get_ldmap_done(uioc_t *uioc)
@@ -3926,12 +4006,11 @@ megaraid_sysfs_get_ldmap_done(uioc_t *uioc)
/**
* megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap
+ * @data : timed out packet
*
* Timeout routine to recover and return to application, in case the adapter
- * has stopped responding. A timeout of 60 seconds for this command seem like
- * a good value
- *
- * @param uioc : timed out packet
+ * has stopped responding. A timeout of 60 seconds for this command seems like
+ * a good value.
*/
static void
megaraid_sysfs_get_ldmap_timeout(unsigned long data)
@@ -3948,6 +4027,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data)
/**
* megaraid_sysfs_get_ldmap - get update logical drive map
+ * @adapter : controller's soft state
*
* This routine will be called whenever user reads the logical drive
* attributes, go get the current logical drive mapping table from the
@@ -3959,10 +4039,8 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data)
* standalone libary. For now, this should suffice since there is no other
* user of this interface.
*
- * @param adapter : controller's soft state
- *
- * @return 0 on success
- * @return -1 on failure
+ * Return 0 on success.
+ * Return -1 on failure.
*/
static int
megaraid_sysfs_get_ldmap(adapter_t *adapter)
@@ -4064,13 +4142,12 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter)
/**
* megaraid_sysfs_show_app_hndl - display application handle for this adapter
+ * @cdev : class device object representation for the host
+ * @buf : buffer to send data to
*
* Display the handle used by the applications while executing management
* tasks on the adapter. We invoke a management module API to get the adapter
* handle, since we do not interface with applications directly.
- *
- * @param cdev : class device object representation for the host
- * @param buf : buffer to send data to
*/
static ssize_t
megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf)
@@ -4087,16 +4164,18 @@ megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf)
/**
* megaraid_sysfs_show_ldnum - display the logical drive number for this device
+ * @dev : device object representation for the scsi device
+ * @attr : device attribute to show
+ * @buf : buffer to send data to
*
* Display the logical drive number for the device in question, if it a valid
- * logical drive. For physical devices, "-1" is returned
- * The logical drive number is displayed in following format
+ * logical drive. For physical devices, "-1" is returned.
+ *
+ * The logical drive number is displayed in following format:
*
* <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE>
- * <int> <int> <int> <int>
*
- * @param dev : device object representation for the scsi device
- * @param buf : buffer to send data to
+ * <int> <int> <int> <int>
*/
static ssize_t
megaraid_sysfs_show_ldnum(struct device *dev, struct device_attribute *attr, char *buf)
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 2b5a3285f79..9de803cebd4 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -21,8 +21,8 @@
#include "megaraid_ioctl.h"
-#define MEGARAID_VERSION "2.20.4.9"
-#define MEGARAID_EXT_VERSION "(Release Date: Sun Jul 16 12:27:22 EST 2006)"
+#define MEGARAID_VERSION "2.20.5.1"
+#define MEGARAID_EXT_VERSION "(Release Date: Thu Nov 16 15:32:35 EST 2006)"
/*
@@ -146,27 +146,27 @@ typedef struct {
/**
* mraid_device_t - adapter soft state structure for mailbox controllers
- * @param una_mbox64 : 64-bit mbox - unaligned
- * @param una_mbox64_dma : mbox dma addr - unaligned
- * @param mbox : 32-bit mbox - aligned
- * @param mbox64 : 64-bit mbox - aligned
- * @param mbox_dma : mbox dma addr - aligned
- * @param mailbox_lock : exclusion lock for the mailbox
- * @param baseport : base port of hba memory
- * @param baseaddr : mapped addr of hba memory
- * @param mbox_pool : pool of mailboxes
- * @param mbox_pool_handle : handle for the mailbox pool memory
- * @param epthru_pool : a pool for extended passthru commands
- * @param epthru_pool_handle : handle to the pool above
- * @param sg_pool : pool of scatter-gather lists for this driver
- * @param sg_pool_handle : handle to the pool above
- * @param ccb_list : list of our command control blocks
- * @param uccb_list : list of cmd control blocks for mgmt module
- * @param umbox64 : array of mailbox for user commands (cmm)
- * @param pdrv_state : array for state of each physical drive.
- * @param last_disp : flag used to show device scanning
- * @param hw_error : set if FW not responding
- * @param fast_load : If set, skip physical device scanning
+ * @una_mbox64 : 64-bit mbox - unaligned
+ * @una_mbox64_dma : mbox dma addr - unaligned
+ * @mbox : 32-bit mbox - aligned
+ * @mbox64 : 64-bit mbox - aligned
+ * @mbox_dma : mbox dma addr - aligned
+ * @mailbox_lock : exclusion lock for the mailbox
+ * @baseport : base port of hba memory
+ * @baseaddr : mapped addr of hba memory
+ * @mbox_pool : pool of mailboxes
+ * @mbox_pool_handle : handle for the mailbox pool memory
+ * @epthru_pool : a pool for extended passthru commands
+ * @epthru_pool_handle : handle to the pool above
+ * @sg_pool : pool of scatter-gather lists for this driver
+ * @sg_pool_handle : handle to the pool above
+ * @ccb_list : list of our command control blocks
+ * @uccb_list : list of cmd control blocks for mgmt module
+ * @umbox64 : array of mailbox for user commands (cmm)
+ * @pdrv_state : array for state of each physical drive.
+ * @last_disp : flag used to show device scanning
+ * @hw_error : set if FW not responding
+ * @fast_load : If set, skip physical device scanning
* @channel_class : channel class, RAID or SCSI
* @sysfs_sem : semaphore to serialize access to sysfs res.
* @sysfs_uioc : management packet to issue FW calls from sysfs
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index d85b9a8f1b8..c1ff20c4747 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -78,10 +78,10 @@ static struct file_operations lsi_fops = {
/**
* mraid_mm_open - open routine for char node interface
- * @inod : unused
+ * @inode : unused
* @filep : unused
*
- * allow ioctl operations by apps only if they superuser privilege
+ * Allow ioctl operations by apps only if they have superuser privilege.
*/
static int
mraid_mm_open(struct inode *inode, struct file *filep)
@@ -214,7 +214,9 @@ mraid_mm_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
/**
* mraid_mm_get_adapter - Returns corresponding adapters for the mimd packet
* @umimd : User space mimd_t ioctl packet
- * @adapter : pointer to the adapter (OUT)
+ * @rval : returned success/error status
+ *
+ * The function return value is a pointer to the located @adapter.
*/
static mraid_mmadp_t *
mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
@@ -252,11 +254,11 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
return adapter;
}
-/*
- * handle_drvrcmd - This routine checks if the opcode is a driver
- * cmd and if it is, handles it.
+/**
+ * handle_drvrcmd - Checks if the opcode is a driver cmd and if it is, handles it.
* @arg : packet sent by the user app
* @old_ioctl : mimd if 1; uioc otherwise
+ * @rval : pointer for command's returned value (not function status)
*/
static int
handle_drvrcmd(void __user *arg, uint8_t old_ioctl, int *rval)
@@ -322,8 +324,8 @@ old_packet:
/**
* mimd_to_kioc - Converter from old to new ioctl format
- *
* @umimd : user space old MIMD IOCTL
+ * @adp : adapter softstate
* @kioc : kernel space new format IOCTL
*
* Routine to convert MIMD interface IOCTL to new interface IOCTL packet. The
@@ -474,7 +476,6 @@ mimd_to_kioc(mimd_t __user *umimd, mraid_mmadp_t *adp, uioc_t *kioc)
/**
* mraid_mm_attch_buf - Attach a free dma buffer for required size
- *
* @adp : Adapter softstate
* @kioc : kioc that the buffer needs to be attached to
* @xferlen : required length for buffer
@@ -607,7 +608,6 @@ mraid_mm_alloc_kioc(mraid_mmadp_t *adp)
/**
* mraid_mm_dealloc_kioc - Return kioc to free pool
- *
* @adp : Adapter softstate
* @kioc : uioc_t node to be returned to free pool
*/
@@ -652,7 +652,6 @@ mraid_mm_dealloc_kioc(mraid_mmadp_t *adp, uioc_t *kioc)
/**
* lld_ioctl - Routine to issue ioctl to low level drvr
- *
* @adp : The adapter handle
* @kioc : The ioctl packet with kernel addresses
*/
@@ -705,7 +704,6 @@ lld_ioctl(mraid_mmadp_t *adp, uioc_t *kioc)
/**
* ioctl_done - callback from the low level driver
- *
* @kioc : completed ioctl packet
*/
static void
@@ -756,9 +754,8 @@ ioctl_done(uioc_t *kioc)
}
-/*
- * lld_timedout : callback from the expired timer
- *
+/**
+ * lld_timedout - callback from the expired timer
* @ptr : ioctl packet that timed out
*/
static void
@@ -776,8 +773,7 @@ lld_timedout(unsigned long ptr)
/**
- * kioc_to_mimd : Converter from new back to old format
- *
+ * kioc_to_mimd - Converter from new back to old format
* @kioc : Kernel space IOCTL packet (successfully issued)
* @mimd : User space MIMD packet
*/
@@ -855,7 +851,6 @@ kioc_to_mimd(uioc_t *kioc, mimd_t __user *mimd)
/**
* hinfo_to_cinfo - Convert new format hba info into old format
- *
* @hinfo : New format, more comprehensive adapter info
* @cinfo : Old format adapter info to support mimd_t apps
*/
@@ -878,10 +873,9 @@ hinfo_to_cinfo(mraid_hba_info_t *hinfo, mcontroller_t *cinfo)
}
-/*
- * mraid_mm_register_adp - Registration routine for low level drvrs
- *
- * @adp : Adapter objejct
+/**
+ * mraid_mm_register_adp - Registration routine for low level drivers
+ * @lld_adp : Adapter objejct
*/
int
mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
@@ -1007,15 +1001,14 @@ memalloc_error:
/**
* mraid_mm_adapter_app_handle - return the application handle for this adapter
+ * @unique_id : adapter unique identifier
*
- * For the given driver data, locate the adadpter in our global list and
+ * For the given driver data, locate the adapter in our global list and
* return the corresponding handle, which is also used by applications to
* uniquely identify an adapter.
*
- * @param unique_id : adapter unique identifier
- *
- * @return adapter handle if found in the list
- * @return 0 if adapter could not be located, should never happen though
+ * Return adapter handle if found in the list.
+ * Return 0 if adapter could not be located, should never happen though.
*/
uint32_t
mraid_mm_adapter_app_handle(uint32_t unique_id)
@@ -1040,7 +1033,6 @@ mraid_mm_adapter_app_handle(uint32_t unique_id)
/**
* mraid_mm_setup_dma_pools - Set up dma buffer pools per adapter
- *
* @adp : Adapter softstate
*
* We maintain a pool of dma buffers per each adapter. Each pool has one
@@ -1093,11 +1085,11 @@ dma_pool_setup_error:
}
-/*
+/**
* mraid_mm_unregister_adp - Unregister routine for low level drivers
- * Assume no outstanding ioctls to llds.
- *
* @unique_id : UID of the adpater
+ *
+ * Assumes no outstanding ioctls to llds.
*/
int
mraid_mm_unregister_adp(uint32_t unique_id)
@@ -1131,7 +1123,6 @@ mraid_mm_unregister_adp(uint32_t unique_id)
/**
* mraid_mm_free_adp_resources - Free adapter softstate
- *
* @adp : Adapter softstate
*/
static void
@@ -1162,7 +1153,6 @@ mraid_mm_free_adp_resources(mraid_mmadp_t *adp)
/**
* mraid_mm_teardown_dma_pools - Free all per adapter dma buffers
- *
* @adp : Adapter softstate
*/
static void
@@ -1190,7 +1180,7 @@ mraid_mm_teardown_dma_pools(mraid_mmadp_t *adp)
}
/**
- * mraid_mm_init : Module entry point
+ * mraid_mm_init - Module entry point
*/
static int __init
mraid_mm_init(void)
@@ -1214,10 +1204,13 @@ mraid_mm_init(void)
}
+#ifdef CONFIG_COMPAT
/**
- * mraid_mm_compat_ioctl : 32bit to 64bit ioctl conversion routine
+ * mraid_mm_compat_ioctl - 32bit to 64bit ioctl conversion routine
+ * @filep : file operations pointer (ignored)
+ * @cmd : ioctl command
+ * @arg : user ioctl packet
*/
-#ifdef CONFIG_COMPAT
static long
mraid_mm_compat_ioctl(struct file *filep, unsigned int cmd,
unsigned long arg)
@@ -1231,7 +1224,7 @@ mraid_mm_compat_ioctl(struct file *filep, unsigned int cmd,
#endif
/**
- * mraid_mm_exit : Module exit point
+ * mraid_mm_exit - Module exit point
*/
static void __exit
mraid_mm_exit(void)
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 55eddcf8eb1..cacb3ad9252 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -15,7 +15,7 @@
#ifndef LSI_MEGARAID_SAS_H
#define LSI_MEGARAID_SAS_H
-/**
+/*
* MegaRAID SAS Driver meta data
*/
#define MEGASAS_VERSION "00.00.03.05"
@@ -40,7 +40,7 @@
* "message frames"
*/
-/**
+/*
* FW posts its state in upper 4 bits of outbound_msg_0 register
*/
#define MFI_STATE_MASK 0xF0000000
@@ -58,7 +58,7 @@
#define MEGAMFI_FRAME_SIZE 64
-/**
+/*
* During FW init, clear pending cmds & reset state using inbound_msg_0
*
* ABORT : Abort all pending cmds
@@ -78,7 +78,7 @@
MFI_INIT_MFIMODE| \
MFI_INIT_ABORT
-/**
+/*
* MFI frame flags
*/
#define MFI_FRAME_POST_IN_REPLY_QUEUE 0x0000
@@ -92,12 +92,12 @@
#define MFI_FRAME_DIR_READ 0x0010
#define MFI_FRAME_DIR_BOTH 0x0018
-/**
+/*
* Definition for cmd_status
*/
#define MFI_CMD_STATUS_POLL_MODE 0xFF
-/**
+/*
* MFI command opcodes
*/
#define MFI_CMD_INIT 0x00
@@ -128,7 +128,7 @@
#define MR_DCMD_CLUSTER_RESET_ALL 0x08010100
#define MR_DCMD_CLUSTER_RESET_LD 0x08010200
-/**
+/*
* MFI command completion codes
*/
enum MFI_STAT {
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index 625ca97da52..9102cbdf135 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -290,7 +290,6 @@ typedef struct _nsp_hw_data {
#endif
} nsp_hw_data;
-
/****************************************************************************
*
*/
@@ -302,22 +301,13 @@ static int nsp_cs_config (struct pcmcia_device *link);
/* Linux SCSI subsystem specific functions */
static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static int nsp_detect_old (struct scsi_host_template *sht);
-static int nsp_release_old(struct Scsi_Host *shpnt);
-#endif
static const char *nsp_info (struct Scsi_Host *shpnt);
static int nsp_proc_info (
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
struct Scsi_Host *host,
-#endif
char *buffer,
char **start,
off_t offset,
int length,
-#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- int hostno,
-#endif
int inout);
static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
void (* done)(struct scsi_cmnd *SCpnt));
@@ -356,7 +346,6 @@ static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht);
static int __init nsp_cs_init(void);
static void __exit nsp_cs_exit(void);
-
/* Debug */
#ifdef NSP_DEBUG
static void show_command (struct scsi_cmnd *SCpnt);
@@ -401,7 +390,6 @@ enum _burst_mode {
BURST_MEM32 = 2,
};
-
/**************************************************************************
* SCSI messaage
*/
@@ -413,62 +401,8 @@ enum _burst_mode {
#define MSG_EXT_SDTR 0x01
-
-/**************************************************************************
- * Compatibility functions
- */
-
-/* for Kernel 2.4 */
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-# define scsi_register_host(template) scsi_register_module(MODULE_SCSI_HA, template)
-# define scsi_unregister_host(template) scsi_unregister_module(MODULE_SCSI_HA, template)
-# define scsi_host_put(host) scsi_unregister(host)
-
-typedef void irqreturn_t;
-# define IRQ_NONE /* */
-# define IRQ_HANDLED /* */
-# define IRQ_RETVAL(x) /* */
-
-/* This is ad-hoc version of scsi_host_get_next() */
-static inline struct Scsi_Host *scsi_host_get_next(struct Scsi_Host *host)
-{
- if (host == NULL) {
- return scsi_hostlist;
- } else {
- return host->next;
- }
-}
-
-/* This is ad-hoc version of scsi_host_hn_get() */
-static inline struct Scsi_Host *scsi_host_hn_get(unsigned short hostno)
-{
- struct Scsi_Host *host;
-
- for (host = scsi_host_get_next(NULL); host != NULL;
- host = scsi_host_get_next(host)) {
- if (host->host_no == hostno) {
- break;
- }
- }
-
- return host;
-}
-
-static void cs_error(struct pcmcia_device *handle, int func, int ret)
-{
- error_info_t err = { func, ret };
- pcmcia_report_error(handle, &err);
-}
-
-/* scatter-gather table */
-# define BUFFER_ADDR (SCpnt->SCp.buffer->address)
-#endif
-
-/* for Kernel 2.6 */
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
/* scatter-gather table */
# define BUFFER_ADDR ((char *)((unsigned int)(SCpnt->SCp.buffer->page) + SCpnt->SCp.buffer->offset))
-#endif
#endif /*__nsp_cs__*/
/* end */
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 7b18a6c7b7e..8081b637d97 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -140,6 +140,8 @@ qla2x00_sysfs_write_nvram(struct kobject *kobj, char *buf, loff_t off,
ha->isp_ops.write_nvram(ha, (uint8_t *)buf, ha->nvram_base, count);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+
return (count);
}
@@ -653,6 +655,43 @@ qla2x00_beacon_store(struct class_device *cdev, const char *buf,
return count;
}
+static ssize_t
+qla2x00_optrom_bios_version_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+
+ return snprintf(buf, PAGE_SIZE, "%d.%02d\n", ha->bios_revision[1],
+ ha->bios_revision[0]);
+}
+
+static ssize_t
+qla2x00_optrom_efi_version_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+
+ return snprintf(buf, PAGE_SIZE, "%d.%02d\n", ha->efi_revision[1],
+ ha->efi_revision[0]);
+}
+
+static ssize_t
+qla2x00_optrom_fcode_version_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+
+ return snprintf(buf, PAGE_SIZE, "%d.%02d\n", ha->fcode_revision[1],
+ ha->fcode_revision[0]);
+}
+
+static ssize_t
+qla2x00_optrom_fw_version_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+
+ return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d %d\n",
+ ha->fw_revision[0], ha->fw_revision[1], ha->fw_revision[2],
+ ha->fw_revision[3]);
+}
+
static CLASS_DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show,
NULL);
static CLASS_DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
@@ -669,6 +708,14 @@ static CLASS_DEVICE_ATTR(zio_timer, S_IRUGO | S_IWUSR, qla2x00_zio_timer_show,
qla2x00_zio_timer_store);
static CLASS_DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, qla2x00_beacon_show,
qla2x00_beacon_store);
+static CLASS_DEVICE_ATTR(optrom_bios_version, S_IRUGO,
+ qla2x00_optrom_bios_version_show, NULL);
+static CLASS_DEVICE_ATTR(optrom_efi_version, S_IRUGO,
+ qla2x00_optrom_efi_version_show, NULL);
+static CLASS_DEVICE_ATTR(optrom_fcode_version, S_IRUGO,
+ qla2x00_optrom_fcode_version_show, NULL);
+static CLASS_DEVICE_ATTR(optrom_fw_version, S_IRUGO,
+ qla2x00_optrom_fw_version_show, NULL);
struct class_device_attribute *qla2x00_host_attrs[] = {
&class_device_attr_driver_version,
@@ -683,6 +730,10 @@ struct class_device_attribute *qla2x00_host_attrs[] = {
&class_device_attr_zio,
&class_device_attr_zio_timer,
&class_device_attr_beacon,
+ &class_device_attr_optrom_bios_version,
+ &class_device_attr_optrom_efi_version,
+ &class_device_attr_optrom_fcode_version,
+ &class_device_attr_optrom_fw_version,
NULL,
};
@@ -836,21 +887,24 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
link_stat_t stat_buf;
struct fc_host_statistics *pfc_host_stat;
+ rval = QLA_FUNCTION_FAILED;
pfc_host_stat = &ha->fc_host_stat;
memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics));
if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
rval = qla24xx_get_isp_stats(ha, (uint32_t *)&stat_buf,
sizeof(stat_buf) / 4, mb_stat);
- } else {
+ } else if (atomic_read(&ha->loop_state) == LOOP_READY &&
+ !test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) &&
+ !test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) &&
+ !ha->dpc_active) {
+ /* Must be in a 'READY' state for statistics retrieval. */
rval = qla2x00_get_link_status(ha, ha->loop_id, &stat_buf,
mb_stat);
}
- if (rval != 0) {
- qla_printk(KERN_WARNING, ha,
- "Unable to retrieve host statistics (%d).\n", mb_stat[0]);
- return pfc_host_stat;
- }
+
+ if (rval != QLA_SUCCESS)
+ goto done;
pfc_host_stat->link_failure_count = stat_buf.link_fail_cnt;
pfc_host_stat->loss_of_sync_count = stat_buf.loss_sync_cnt;
@@ -858,7 +912,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
pfc_host_stat->prim_seq_protocol_err_count = stat_buf.prim_seq_err_cnt;
pfc_host_stat->invalid_tx_word_count = stat_buf.inval_xmit_word_cnt;
pfc_host_stat->invalid_crc_count = stat_buf.inval_crc_cnt;
-
+done:
return pfc_host_stat;
}
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 2c10130d9e0..05f4f2a378e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2045,6 +2045,29 @@ struct isp_operations {
uint32_t, uint32_t);
int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t,
uint32_t);
+
+ int (*get_flash_version) (struct scsi_qla_host *, void *);
+};
+
+/* MSI-X Support *************************************************************/
+
+#define QLA_MSIX_CHIP_REV_24XX 3
+#define QLA_MSIX_FW_MODE(m) (((m) & (BIT_7|BIT_8|BIT_9)) >> 7)
+#define QLA_MSIX_FW_MODE_1(m) (QLA_MSIX_FW_MODE(m) == 1)
+
+#define QLA_MSIX_DEFAULT 0x00
+#define QLA_MSIX_RSP_Q 0x01
+
+#define QLA_MSIX_ENTRIES 2
+#define QLA_MIDX_DEFAULT 0
+#define QLA_MIDX_RSP_Q 1
+
+struct scsi_qla_host;
+
+struct qla_msix_entry {
+ int have_irq;
+ uint16_t msix_vector;
+ uint16_t msix_entry;
};
/*
@@ -2077,6 +2100,7 @@ typedef struct scsi_qla_host {
uint32_t enable_lip_full_login :1;
uint32_t enable_target_reset :1;
uint32_t enable_led_scheme :1;
+ uint32_t inta_enabled :1;
uint32_t msi_enabled :1;
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
@@ -2316,8 +2340,6 @@ typedef struct scsi_qla_host {
#define MBX_INTR_WAIT 2
#define MBX_UPDATE_FLASH_ACTIVE 3
- spinlock_t mbx_reg_lock; /* Mbx Cmd Register Lock */
-
struct semaphore mbx_cmd_sem; /* Serialialize mbx access */
struct semaphore mbx_intr_sem; /* Used for completion notification */
@@ -2358,6 +2380,7 @@ typedef struct scsi_qla_host {
uint8_t host_str[16];
uint32_t pci_attr;
+ uint16_t chip_revision;
uint16_t product_id[4];
@@ -2379,6 +2402,15 @@ typedef struct scsi_qla_host {
#define QLA_SREADING 1
#define QLA_SWRITING 2
+ /* PCI expansion ROM image information. */
+#define ROM_CODE_TYPE_BIOS 0
+#define ROM_CODE_TYPE_FCODE 1
+#define ROM_CODE_TYPE_EFI 3
+ uint8_t bios_revision[2];
+ uint8_t efi_revision[2];
+ uint8_t fcode_revision[16];
+ uint32_t fw_revision[4];
+
/* Needed for BEACON */
uint16_t beacon_blink_led;
uint8_t beacon_color_state;
@@ -2391,6 +2423,8 @@ typedef struct scsi_qla_host {
uint16_t zio_mode;
uint16_t zio_timer;
struct fc_host_statistics fc_host_stat;
+
+ struct qla_msix_entry msix_entries[QLA_MSIX_ENTRIES];
} scsi_qla_host_t;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index e4dd12f4b80..74544ae4b0e 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -224,6 +224,9 @@ extern irqreturn_t qla24xx_intr_handler(int, void *);
extern void qla2x00_process_response_queue(struct scsi_qla_host *);
extern void qla24xx_process_response_queue(struct scsi_qla_host *);
+extern int qla2x00_request_irqs(scsi_qla_host_t *);
+extern void qla2x00_free_irqs(scsi_qla_host_t *);
+
/*
* Global Function Prototypes in qla_sup.c source file.
*/
@@ -259,6 +262,9 @@ extern uint8_t *qla24xx_read_optrom_data(struct scsi_qla_host *, uint8_t *,
extern int qla24xx_write_optrom_data(struct scsi_qla_host *, uint8_t *,
uint32_t, uint32_t);
+extern int qla2x00_get_flash_version(scsi_qla_host_t *, void *);
+extern int qla24xx_get_flash_version(scsi_qla_host_t *, void *);
+
/*
* Global Function Prototypes in qla_dbg.c source file.
*/
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b3dac26ddba..98c01cd5e1a 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -65,7 +65,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
ha->flags.reset_active = 0;
atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
atomic_set(&ha->loop_state, LOOP_DOWN);
- ha->device_flags = 0;
+ ha->device_flags = DFLG_NO_CABLE;
ha->dpc_flags = 0;
ha->flags.management_server_logged_in = 0;
ha->marker_needed = 0;
@@ -77,16 +77,23 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
qla_printk(KERN_INFO, ha, "Configuring PCI space...\n");
rval = ha->isp_ops.pci_config(ha);
if (rval) {
- DEBUG2(printk("scsi(%ld): Unable to configure PCI space=n",
+ DEBUG2(printk("scsi(%ld): Unable to configure PCI space.\n",
ha->host_no));
return (rval);
}
ha->isp_ops.reset_chip(ha);
+ ha->isp_ops.get_flash_version(ha, ha->request_ring);
+
qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
- ha->isp_ops.nvram_config(ha);
+ rval = ha->isp_ops.nvram_config(ha);
+ if (rval) {
+ DEBUG2(printk("scsi(%ld): Unable to verify NVRAM data.\n",
+ ha->host_no));
+ return rval;
+ }
if (ha->flags.disable_serdes) {
/* Mask HBA via NVRAM settings? */
@@ -293,6 +300,8 @@ qla24xx_pci_config(scsi_qla_host_t *ha)
d &= ~PCI_ROM_ADDRESS_ENABLE;
pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
+ pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->chip_revision);
+
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->pci_attr = RD_REG_DWORD(&reg->ctrl_status);
@@ -1351,6 +1360,39 @@ qla2x00_configure_hba(scsi_qla_host_t *ha)
return(rval);
}
+static inline void
+qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *def)
+{
+ char *st, *en;
+ uint16_t index;
+
+ if (memcmp(model, BINZERO, len) != 0) {
+ strncpy(ha->model_number, model, len);
+ st = en = ha->model_number;
+ en += len - 1;
+ while (en > st) {
+ if (*en != 0x20 && *en != 0x00)
+ break;
+ *en-- = '\0';
+ }
+
+ index = (ha->pdev->subsystem_device & 0xff);
+ if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+ index < QLA_MODEL_NAMES)
+ ha->model_desc = qla2x00_model_name[index * 2 + 1];
+ } else {
+ index = (ha->pdev->subsystem_device & 0xff);
+ if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+ index < QLA_MODEL_NAMES) {
+ strcpy(ha->model_number,
+ qla2x00_model_name[index * 2]);
+ ha->model_desc = qla2x00_model_name[index * 2 + 1];
+ } else {
+ strcpy(ha->model_number, def);
+ }
+ }
+}
+
/*
* NVRAM configuration for ISP 2xxx
*
@@ -1367,7 +1409,6 @@ qla2x00_configure_hba(scsi_qla_host_t *ha)
int
qla2x00_nvram_config(scsi_qla_host_t *ha)
{
- int rval;
uint8_t chksum = 0;
uint16_t cnt;
uint8_t *dptr1, *dptr2;
@@ -1376,8 +1417,6 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
uint8_t *ptr = (uint8_t *)ha->request_ring;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
- rval = QLA_SUCCESS;
-
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(nvram_t);
ha->nvram_base = 0;
@@ -1401,55 +1440,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
"checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
nv->nvram_version);
- qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
- "invalid -- WWPN) defaults.\n");
-
- /*
- * Set default initialization control block.
- */
- memset(nv, 0, ha->nvram_size);
- nv->parameter_block_version = ICB_VERSION;
-
- if (IS_QLA23XX(ha)) {
- nv->firmware_options[0] = BIT_2 | BIT_1;
- nv->firmware_options[1] = BIT_7 | BIT_5;
- nv->add_firmware_options[0] = BIT_5;
- nv->add_firmware_options[1] = BIT_5 | BIT_4;
- nv->frame_payload_size = __constant_cpu_to_le16(2048);
- nv->special_options[1] = BIT_7;
- } else if (IS_QLA2200(ha)) {
- nv->firmware_options[0] = BIT_2 | BIT_1;
- nv->firmware_options[1] = BIT_7 | BIT_5;
- nv->add_firmware_options[0] = BIT_5;
- nv->add_firmware_options[1] = BIT_5 | BIT_4;
- nv->frame_payload_size = __constant_cpu_to_le16(1024);
- } else if (IS_QLA2100(ha)) {
- nv->firmware_options[0] = BIT_3 | BIT_1;
- nv->firmware_options[1] = BIT_5;
- nv->frame_payload_size = __constant_cpu_to_le16(1024);
- }
-
- nv->max_iocb_allocation = __constant_cpu_to_le16(256);
- nv->execution_throttle = __constant_cpu_to_le16(16);
- nv->retry_count = 8;
- nv->retry_delay = 1;
-
- nv->port_name[0] = 33;
- nv->port_name[3] = 224;
- nv->port_name[4] = 139;
-
- nv->login_timeout = 4;
-
- /*
- * Set default host adapter parameters
- */
- nv->host_p[1] = BIT_2;
- nv->reset_delay = 5;
- nv->port_down_retry_count = 8;
- nv->max_luns_per_target = __constant_cpu_to_le16(8);
- nv->link_down_timeout = 60;
-
- rval = 1;
+ return QLA_FUNCTION_FAILED;
}
#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
@@ -1489,33 +1480,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
strcpy(ha->model_number, "QLA2300");
}
} else {
- if (rval == 0 &&
- memcmp(nv->model_number, BINZERO,
- sizeof(nv->model_number)) != 0) {
- char *st, *en;
-
- strncpy(ha->model_number, nv->model_number,
- sizeof(nv->model_number));
- st = en = ha->model_number;
- en += sizeof(nv->model_number) - 1;
- while (en > st) {
- if (*en != 0x20 && *en != 0x00)
- break;
- *en-- = '\0';
- }
- } else {
- uint16_t index;
-
- index = (ha->pdev->subsystem_device & 0xff);
- if (index < QLA_MODEL_NAMES) {
- strcpy(ha->model_number,
- qla2x00_model_name[index * 2]);
- ha->model_desc =
- qla2x00_model_name[index * 2 + 1];
- } else {
- strcpy(ha->model_number, "QLA23xx");
- }
- }
+ qla2x00_set_model_info(ha, nv->model_number,
+ sizeof(nv->model_number), "QLA23xx");
}
} else if (IS_QLA2200(ha)) {
nv->firmware_options[0] |= BIT_2;
@@ -1687,11 +1653,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
}
}
- if (rval) {
- DEBUG2_3(printk(KERN_WARNING
- "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
- }
- return (rval);
+ return QLA_SUCCESS;
}
static void
@@ -3107,7 +3069,11 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- ha->isp_ops.nvram_config(ha);
+ ha->isp_ops.get_flash_version(ha, ha->request_ring);
+
+ rval = ha->isp_ops.nvram_config(ha);
+ if (rval)
+ goto isp_abort_retry;
if (!qla2x00_restart_isp(ha)) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
@@ -3137,6 +3103,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
}
}
} else { /* failed the ISP abort */
+isp_abort_retry:
ha->flags.online = 1;
if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
if (ha->isp_abort_cnt == 0) {
@@ -3326,7 +3293,6 @@ qla24xx_reset_adapter(scsi_qla_host_t *ha)
int
qla24xx_nvram_config(scsi_qla_host_t *ha)
{
- int rval;
struct init_cb_24xx *icb;
struct nvram_24xx *nv;
uint32_t *dptr;
@@ -3334,7 +3300,6 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
uint32_t chksum;
uint16_t cnt;
- rval = QLA_SUCCESS;
icb = (struct init_cb_24xx *)ha->init_cb;
nv = (struct nvram_24xx *)ha->request_ring;
@@ -3367,51 +3332,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
"checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
le16_to_cpu(nv->nvram_version));
- qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
- "invalid -- WWPN) defaults.\n");
-
- /*
- * Set default initialization control block.
- */
- memset(nv, 0, ha->nvram_size);
- nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
- nv->version = __constant_cpu_to_le16(ICB_VERSION);
- nv->frame_payload_size = __constant_cpu_to_le16(2048);
- nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
- nv->exchange_count = __constant_cpu_to_le16(0);
- nv->hard_address = __constant_cpu_to_le16(124);
- nv->port_name[0] = 0x21;
- nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
- nv->port_name[2] = 0x00;
- nv->port_name[3] = 0xe0;
- nv->port_name[4] = 0x8b;
- nv->port_name[5] = 0x1c;
- nv->port_name[6] = 0x55;
- nv->port_name[7] = 0x86;
- nv->node_name[0] = 0x20;
- nv->node_name[1] = 0x00;
- nv->node_name[2] = 0x00;
- nv->node_name[3] = 0xe0;
- nv->node_name[4] = 0x8b;
- nv->node_name[5] = 0x1c;
- nv->node_name[6] = 0x55;
- nv->node_name[7] = 0x86;
- nv->login_retry_count = __constant_cpu_to_le16(8);
- nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
- nv->login_timeout = __constant_cpu_to_le16(0);
- nv->firmware_options_1 =
- __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
- nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
- nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
- nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
- nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
- nv->efi_parameters = __constant_cpu_to_le32(0);
- nv->reset_delay = 5;
- nv->max_luns_per_target = __constant_cpu_to_le16(128);
- nv->port_down_retry_count = __constant_cpu_to_le16(30);
- nv->link_down_timeout = __constant_cpu_to_le16(30);
-
- rval = 1;
+ return QLA_FUNCTION_FAILED;
}
/* Reset Initialization control block */
@@ -3438,25 +3359,8 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
/*
* Setup driver NVRAM options.
*/
- if (memcmp(nv->model_name, BINZERO, sizeof(nv->model_name)) != 0) {
- char *st, *en;
- uint16_t index;
-
- strncpy(ha->model_number, nv->model_name,
- sizeof(nv->model_name));
- st = en = ha->model_number;
- en += sizeof(nv->model_name) - 1;
- while (en > st) {
- if (*en != 0x20 && *en != 0x00)
- break;
- *en-- = '\0';
- }
-
- index = (ha->pdev->subsystem_device & 0xff);
- if (index < QLA_MODEL_NAMES)
- ha->model_desc = qla2x00_model_name[index * 2 + 1];
- } else
- strcpy(ha->model_number, "QLA2462");
+ qla2x00_set_model_info(ha, nv->model_name, sizeof(nv->model_name),
+ "QLA2462");
/* Use alternate WWN? */
if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
@@ -3575,11 +3479,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
ha->flags.process_response_queue = 1;
}
- if (rval) {
- DEBUG2_3(printk(KERN_WARNING
- "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
- }
- return (rval);
+ return QLA_SUCCESS;
}
static int
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 39fd17b05be..d4885616cd3 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -86,12 +86,8 @@ qla2100_intr_handler(int irq, void *dev_id)
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
- spin_lock_irqsave(&ha->mbx_reg_lock, flags);
-
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
up(&ha->mbx_intr_sem);
-
- spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
}
return (IRQ_HANDLED);
@@ -199,12 +195,8 @@ qla2300_intr_handler(int irq, void *dev_id)
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
- spin_lock_irqsave(&ha->mbx_reg_lock, flags);
-
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
up(&ha->mbx_intr_sem);
-
- spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
}
return (IRQ_HANDLED);
@@ -654,10 +646,8 @@ qla2x00_ramp_up_queue_depth(scsi_qla_host_t *ha, srb_t *sp)
fcport->last_queue_full + ql2xqfullrampup * HZ))
return;
- spin_unlock_irq(&ha->hardware_lock);
starget_for_each_device(sdev->sdev_target, fcport,
qla2x00_adjust_sdev_qdepth_up);
- spin_lock_irq(&ha->hardware_lock);
}
/**
@@ -927,10 +917,8 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
/* Adjust queue depth for all luns on the port. */
fcport->last_queue_full = jiffies;
- spin_unlock_irq(&ha->hardware_lock);
starget_for_each_device(cp->device->sdev_target,
fcport, qla2x00_adjust_sdev_qdepth_down);
- spin_lock_irq(&ha->hardware_lock);
break;
}
if (lscsi_status != SS_CHECK_CONDITION)
@@ -995,6 +983,22 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
if (lscsi_status != 0) {
cp->result = DID_OK << 16 | lscsi_status;
+ if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
+ DEBUG2(printk(KERN_INFO
+ "scsi(%ld): QUEUE FULL status detected "
+ "0x%x-0x%x.\n", ha->host_no, comp_status,
+ scsi_status));
+
+ /*
+ * Adjust queue depth for all luns on the
+ * port.
+ */
+ fcport->last_queue_full = jiffies;
+ starget_for_each_device(
+ cp->device->sdev_target, fcport,
+ qla2x00_adjust_sdev_qdepth_down);
+ break;
+ }
if (lscsi_status != SS_CHECK_CONDITION)
break;
@@ -1482,12 +1486,8 @@ qla24xx_intr_handler(int irq, void *dev_id)
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
- spin_lock_irqsave(&ha->mbx_reg_lock, flags);
-
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
up(&ha->mbx_intr_sem);
-
- spin_unlock_irqrestore(&ha->mbx_reg_lock, flags);
}
return IRQ_HANDLED;
@@ -1536,3 +1536,216 @@ qla24xx_ms_entry(scsi_qla_host_t *ha, struct ct_entry_24xx *pkt)
qla2x00_sp_compl(ha, sp);
}
+static irqreturn_t
+qla24xx_msix_rsp_q(int irq, void *dev_id)
+{
+ scsi_qla_host_t *ha;
+ struct device_reg_24xx __iomem *reg;
+ unsigned long flags;
+
+ ha = dev_id;
+ reg = &ha->iobase->isp24;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ qla24xx_process_response_queue(ha);
+
+ WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
+ RD_REG_DWORD_RELAXED(&reg->hccr);
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+qla24xx_msix_default(int irq, void *dev_id)
+{
+ scsi_qla_host_t *ha;
+ struct device_reg_24xx __iomem *reg;
+ int status;
+ unsigned long flags;
+ unsigned long iter;
+ uint32_t stat;
+ uint32_t hccr;
+ uint16_t mb[4];
+
+ ha = dev_id;
+ reg = &ha->iobase->isp24;
+ status = 0;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ for (iter = 50; iter--; ) {
+ stat = RD_REG_DWORD(&reg->host_status);
+ if (stat & HSRX_RISC_PAUSED) {
+ hccr = RD_REG_DWORD(&reg->hccr);
+
+ qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
+ "Dumping firmware!\n", hccr);
+ ha->isp_ops.fw_dump(ha, 1);
+ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+ break;
+ } else if ((stat & HSRX_RISC_INT) == 0)
+ break;
+
+ switch (stat & 0xff) {
+ case 0x1:
+ case 0x2:
+ case 0x10:
+ case 0x11:
+ qla24xx_mbx_completion(ha, MSW(stat));
+ status |= MBX_INTERRUPT;
+
+ break;
+ case 0x12:
+ mb[0] = MSW(stat);
+ mb[1] = RD_REG_WORD(&reg->mailbox1);
+ mb[2] = RD_REG_WORD(&reg->mailbox2);
+ mb[3] = RD_REG_WORD(&reg->mailbox3);
+ qla2x00_async_event(ha, mb);
+ break;
+ case 0x13:
+ qla24xx_process_response_queue(ha);
+ break;
+ default:
+ DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
+ "(%d).\n",
+ ha->host_no, stat & 0xff));
+ break;
+ }
+ WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
+ RD_REG_DWORD_RELAXED(&reg->hccr);
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
+ (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
+ set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
+ up(&ha->mbx_intr_sem);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* Interrupt handling helpers. */
+
+struct qla_init_msix_entry {
+ uint16_t entry;
+ uint16_t index;
+ const char *name;
+ irqreturn_t (*handler)(int, void *);
+};
+
+static struct qla_init_msix_entry imsix_entries[QLA_MSIX_ENTRIES] = {
+ { QLA_MSIX_DEFAULT, QLA_MIDX_DEFAULT,
+ "qla2xxx (default)", qla24xx_msix_default },
+
+ { QLA_MSIX_RSP_Q, QLA_MIDX_RSP_Q,
+ "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
+};
+
+static void
+qla24xx_disable_msix(scsi_qla_host_t *ha)
+{
+ int i;
+ struct qla_msix_entry *qentry;
+
+ for (i = 0; i < QLA_MSIX_ENTRIES; i++) {
+ qentry = &ha->msix_entries[imsix_entries[i].index];
+ if (qentry->have_irq)
+ free_irq(qentry->msix_vector, ha);
+ }
+ pci_disable_msix(ha->pdev);
+}
+
+static int
+qla24xx_enable_msix(scsi_qla_host_t *ha)
+{
+ int i, ret;
+ struct msix_entry entries[QLA_MSIX_ENTRIES];
+ struct qla_msix_entry *qentry;
+
+ for (i = 0; i < QLA_MSIX_ENTRIES; i++)
+ entries[i].entry = imsix_entries[i].entry;
+
+ ret = pci_enable_msix(ha->pdev, entries, ARRAY_SIZE(entries));
+ if (ret) {
+ qla_printk(KERN_WARNING, ha,
+ "MSI-X: Failed to enable support -- %d/%d\n",
+ QLA_MSIX_ENTRIES, ret);
+ goto msix_out;
+ }
+ ha->flags.msix_enabled = 1;
+
+ for (i = 0; i < QLA_MSIX_ENTRIES; i++) {
+ qentry = &ha->msix_entries[imsix_entries[i].index];
+ qentry->msix_vector = entries[i].vector;
+ qentry->msix_entry = entries[i].entry;
+ qentry->have_irq = 0;
+ ret = request_irq(qentry->msix_vector,
+ imsix_entries[i].handler, 0, imsix_entries[i].name, ha);
+ if (ret) {
+ qla_printk(KERN_WARNING, ha,
+ "MSI-X: Unable to register handler -- %x/%d.\n",
+ imsix_entries[i].index, ret);
+ qla24xx_disable_msix(ha);
+ goto msix_out;
+ }
+ qentry->have_irq = 1;
+ }
+
+msix_out:
+ return ret;
+}
+
+int
+qla2x00_request_irqs(scsi_qla_host_t *ha)
+{
+ int ret;
+
+ /* If possible, enable MSI-X. */
+ if (!IS_QLA2432(ha))
+ goto skip_msix;
+
+ if (ha->chip_revision < QLA_MSIX_CHIP_REV_24XX ||
+ !QLA_MSIX_FW_MODE_1(ha->fw_attributes)) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n",
+ ha->chip_revision, ha->fw_attributes));
+
+ goto skip_msix;
+ }
+
+ ret = qla24xx_enable_msix(ha);
+ if (!ret) {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "MSI-X: Enabled (0x%X, 0x%X).\n", ha->chip_revision,
+ ha->fw_attributes));
+ return ret;
+ }
+ qla_printk(KERN_WARNING, ha,
+ "MSI-X: Falling back-to INTa mode -- %d.\n", ret);
+skip_msix:
+ ret = request_irq(ha->pdev->irq, ha->isp_ops.intr_handler,
+ IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
+ if (!ret) {
+ ha->flags.inta_enabled = 1;
+ ha->host->irq = ha->pdev->irq;
+ } else {
+ qla_printk(KERN_WARNING, ha,
+ "Failed to reserve interrupt %d already in use.\n",
+ ha->pdev->irq);
+ }
+
+ return ret;
+}
+
+void
+qla2x00_free_irqs(scsi_qla_host_t *ha)
+{
+
+ if (ha->flags.msix_enabled)
+ qla24xx_disable_msix(ha);
+ else if (ha->flags.inta_enabled)
+ free_irq(ha->host->irq, ha);
+}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 077e5789bee..83376f6ac3d 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -55,7 +55,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
uint16_t __iomem *optr;
uint32_t cnt;
uint32_t mboxes;
- unsigned long mbx_flags = 0;
unsigned long wait_time;
rval = QLA_SUCCESS;
@@ -81,10 +80,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
/* Save mailbox command for debug */
ha->mcp = mcp;
- /* Try to get mailbox register access */
- if (!abort_active)
- spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);
-
DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
ha->host_no, mcp->mb[0]));
@@ -161,9 +156,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
WRT_REG_WORD(&reg->isp.hccr, HCCR_SET_HOST_INT);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (!abort_active)
- spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
-
/* Wait for either the timer to expire
* or the mbox completion interrupt
*/
@@ -184,8 +176,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
else
WRT_REG_WORD(&reg->isp.hccr, HCCR_SET_HOST_INT);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (!abort_active)
- spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
wait_time = jiffies + mcp->tov * HZ; /* wait at most tov secs */
while (!ha->flags.mbox_int) {
@@ -201,9 +191,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
} /* while */
}
- if (!abort_active)
- spin_lock_irqsave(&ha->mbx_reg_lock, mbx_flags);
-
/* Check whether we timed out */
if (ha->flags.mbox_int) {
uint16_t *iptr2;
@@ -256,9 +243,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp)
rval = QLA_FUNCTION_TIMEOUT;
}
- if (!abort_active)
- spin_unlock_irqrestore(&ha->mbx_reg_lock, mbx_flags);
-
ha->flags.mbox_busy = 0;
/* Clean up */
@@ -1713,7 +1697,7 @@ qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain,
lg->entry_count = 1;
lg->nport_handle = cpu_to_le16(loop_id);
lg->control_flags =
- __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_EXPL_LOGO);
+ __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
lg->port_id[0] = al_pa;
lg->port_id[1] = area;
lg->port_id[2] = domain;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index d6445ae841b..68f5d24b938 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1485,6 +1485,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->isp_ops.fw_dump = qla2100_fw_dump;
ha->isp_ops.read_optrom = qla2x00_read_optrom_data;
ha->isp_ops.write_optrom = qla2x00_write_optrom_data;
+ ha->isp_ops.get_flash_version = qla2x00_get_flash_version;
if (IS_QLA2100(ha)) {
host->max_id = MAX_TARGETS_2100;
ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
@@ -1550,6 +1551,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->isp_ops.beacon_on = qla24xx_beacon_on;
ha->isp_ops.beacon_off = qla24xx_beacon_off;
ha->isp_ops.beacon_blink = qla24xx_beacon_blink;
+ ha->isp_ops.get_flash_version = qla24xx_get_flash_version;
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_24XX;
}
@@ -1564,14 +1566,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
INIT_LIST_HEAD(&ha->list);
INIT_LIST_HEAD(&ha->fcports);
- /*
- * These locks are used to prevent more than one CPU
- * from modifying the queue at the same time. The
- * higher level "host_lock" will reduce most
- * contention for these locks.
- */
- spin_lock_init(&ha->mbx_reg_lock);
-
qla2x00_config_dma_addressing(ha);
if (qla2x00_mem_alloc(ha)) {
qla_printk(KERN_WARNING, ha,
@@ -1615,15 +1609,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
host->max_lun = MAX_LUNS;
host->transportt = qla2xxx_transport_template;
- ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
- IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
- if (ret) {
- qla_printk(KERN_WARNING, ha,
- "Failed to reserve interrupt %d already in use.\n",
- pdev->irq);
+ ret = qla2x00_request_irqs(ha);
+ if (ret)
goto probe_failed;
- }
- host->irq = pdev->irq;
/* Initialized the timer */
qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
@@ -1753,9 +1741,7 @@ qla2x00_free_device(scsi_qla_host_t *ha)
qla2x00_mem_free(ha);
- /* Detach interrupts */
- if (ha->host->irq)
- free_irq(ha->host->irq, ha);
+ qla2x00_free_irqs(ha);
/* release io space registers */
if (ha->iobase)
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 15390ad8745..ff1dd4175a7 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -611,7 +611,6 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
flash_conf_to_access_addr(0x0339),
(fdata & 0xff00) | ((fdata << 16) &
0xff0000) | ((fdata >> 16) & 0xff));
- fdata = (faddr & sec_mask) << 2;
ret = qla24xx_write_flash_dword(ha, conf_addr,
(fdata & 0xff00) |((fdata << 16) &
0xff0000) | ((fdata >> 16) & 0xff));
@@ -1383,6 +1382,29 @@ qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
}
+static void
+qla2x00_read_flash_data(scsi_qla_host_t *ha, uint8_t *tmp_buf, uint32_t saddr,
+ uint32_t length)
+{
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ uint32_t midpoint, ilength;
+ uint8_t data;
+
+ midpoint = length / 2;
+
+ WRT_REG_WORD(&reg->nvram, 0);
+ RD_REG_WORD(&reg->nvram);
+ for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) {
+ if (ilength == midpoint) {
+ WRT_REG_WORD(&reg->nvram, NVR_SELECT);
+ RD_REG_WORD(&reg->nvram);
+ }
+ data = qla2x00_read_flash_byte(ha, saddr);
+ if (saddr % 100)
+ udelay(10);
+ *tmp_buf = data;
+ }
+}
static inline void
qla2x00_suspend_hba(struct scsi_qla_host *ha)
@@ -1722,3 +1744,327 @@ qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
return rval;
}
+
+/**
+ * qla2x00_get_fcode_version() - Determine an FCODE image's version.
+ * @ha: HA context
+ * @pcids: Pointer to the FCODE PCI data structure
+ *
+ * The process of retrieving the FCODE version information is at best
+ * described as interesting.
+ *
+ * Within the first 100h bytes of the image an ASCII string is present
+ * which contains several pieces of information including the FCODE
+ * version. Unfortunately it seems the only reliable way to retrieve
+ * the version is by scanning for another sentinel within the string,
+ * the FCODE build date:
+ *
+ * ... 2.00.02 10/17/02 ...
+ *
+ * Returns QLA_SUCCESS on successful retrieval of version.
+ */
+static void
+qla2x00_get_fcode_version(scsi_qla_host_t *ha, uint32_t pcids)
+{
+ int ret = QLA_FUNCTION_FAILED;
+ uint32_t istart, iend, iter, vend;
+ uint8_t do_next, rbyte, *vbyte;
+
+ memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
+
+ /* Skip the PCI data structure. */
+ istart = pcids +
+ ((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) |
+ qla2x00_read_flash_byte(ha, pcids + 0x0A));
+ iend = istart + 0x100;
+ do {
+ /* Scan for the sentinel date string...eeewww. */
+ do_next = 0;
+ iter = istart;
+ while ((iter < iend) && !do_next) {
+ iter++;
+ if (qla2x00_read_flash_byte(ha, iter) == '/') {
+ if (qla2x00_read_flash_byte(ha, iter + 2) ==
+ '/')
+ do_next++;
+ else if (qla2x00_read_flash_byte(ha,
+ iter + 3) == '/')
+ do_next++;
+ }
+ }
+ if (!do_next)
+ break;
+
+ /* Backtrack to previous ' ' (space). */
+ do_next = 0;
+ while ((iter > istart) && !do_next) {
+ iter--;
+ if (qla2x00_read_flash_byte(ha, iter) == ' ')
+ do_next++;
+ }
+ if (!do_next)
+ break;
+
+ /*
+ * Mark end of version tag, and find previous ' ' (space) or
+ * string length (recent FCODE images -- major hack ahead!!!).
+ */
+ vend = iter - 1;
+ do_next = 0;
+ while ((iter > istart) && !do_next) {
+ iter--;
+ rbyte = qla2x00_read_flash_byte(ha, iter);
+ if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10)
+ do_next++;
+ }
+ if (!do_next)
+ break;
+
+ /* Mark beginning of version tag, and copy data. */
+ iter++;
+ if ((vend - iter) &&
+ ((vend - iter) < sizeof(ha->fcode_revision))) {
+ vbyte = ha->fcode_revision;
+ while (iter <= vend) {
+ *vbyte++ = qla2x00_read_flash_byte(ha, iter);
+ iter++;
+ }
+ ret = QLA_SUCCESS;
+ }
+ } while (0);
+
+ if (ret != QLA_SUCCESS)
+ memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
+}
+
+int
+qla2x00_get_flash_version(scsi_qla_host_t *ha, void *mbuf)
+{
+ int ret = QLA_SUCCESS;
+ uint8_t code_type, last_image;
+ uint32_t pcihdr, pcids;
+ uint8_t *dbyte;
+ uint16_t *dcode;
+
+ if (!ha->pio_address || !mbuf)
+ return QLA_FUNCTION_FAILED;
+
+ memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
+ memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
+ memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
+ memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
+
+ qla2x00_flash_enable(ha);
+
+ /* Begin with first PCI expansion ROM header. */
+ pcihdr = 0;
+ last_image = 1;
+ do {
+ /* Verify PCI expansion ROM header. */
+ if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
+ qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
+ /* No signature */
+ DEBUG2(printk("scsi(%ld): No matching ROM "
+ "signature.\n", ha->host_no));
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
+
+ /* Locate PCI data structure. */
+ pcids = pcihdr +
+ ((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) |
+ qla2x00_read_flash_byte(ha, pcihdr + 0x18));
+
+ /* Validate signature of PCI data structure. */
+ if (qla2x00_read_flash_byte(ha, pcids) != 'P' ||
+ qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' ||
+ qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
+ qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
+ /* Incorrect header. */
+ DEBUG2(printk("%s(): PCI data struct not found "
+ "pcir_adr=%x.\n", __func__, pcids));
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
+
+ /* Read version */
+ code_type = qla2x00_read_flash_byte(ha, pcids + 0x14);
+ switch (code_type) {
+ case ROM_CODE_TYPE_BIOS:
+ /* Intel x86, PC-AT compatible. */
+ ha->bios_revision[0] =
+ qla2x00_read_flash_byte(ha, pcids + 0x12);
+ ha->bios_revision[1] =
+ qla2x00_read_flash_byte(ha, pcids + 0x13);
+ DEBUG3(printk("%s(): read BIOS %d.%d.\n", __func__,
+ ha->bios_revision[1], ha->bios_revision[0]));
+ break;
+ case ROM_CODE_TYPE_FCODE:
+ /* Open Firmware standard for PCI (FCode). */
+ /* Eeeewww... */
+ qla2x00_get_fcode_version(ha, pcids);
+ break;
+ case ROM_CODE_TYPE_EFI:
+ /* Extensible Firmware Interface (EFI). */
+ ha->efi_revision[0] =
+ qla2x00_read_flash_byte(ha, pcids + 0x12);
+ ha->efi_revision[1] =
+ qla2x00_read_flash_byte(ha, pcids + 0x13);
+ DEBUG3(printk("%s(): read EFI %d.%d.\n", __func__,
+ ha->efi_revision[1], ha->efi_revision[0]));
+ break;
+ default:
+ DEBUG2(printk("%s(): Unrecognized code type %x at "
+ "pcids %x.\n", __func__, code_type, pcids));
+ break;
+ }
+
+ last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
+
+ /* Locate next PCI expansion ROM. */
+ pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) |
+ qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512;
+ } while (!last_image);
+
+ if (IS_QLA2322(ha)) {
+ /* Read firmware image information. */
+ memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
+ dbyte = mbuf;
+ memset(dbyte, 0, 8);
+ dcode = (uint16_t *)dbyte;
+
+ qla2x00_read_flash_data(ha, dbyte, FA_RISC_CODE_ADDR * 4 + 10,
+ 8);
+ DEBUG3(printk("%s(%ld): dumping fw ver from flash:\n",
+ __func__, ha->host_no));
+ DEBUG3(qla2x00_dump_buffer((uint8_t *)dbyte, 8));
+
+ if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
+ dcode[2] == 0xffff && dcode[3] == 0xffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ DEBUG2(printk("%s(): Unrecognized fw revision at "
+ "%x.\n", __func__, FA_RISC_CODE_ADDR * 4));
+ } else {
+ /* values are in big endian */
+ ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
+ ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
+ ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
+ }
+ }
+
+ qla2x00_flash_disable(ha);
+
+ return ret;
+}
+
+int
+qla24xx_get_flash_version(scsi_qla_host_t *ha, void *mbuf)
+{
+ int ret = QLA_SUCCESS;
+ uint32_t pcihdr, pcids;
+ uint32_t *dcode;
+ uint8_t *bcode;
+ uint8_t code_type, last_image;
+ int i;
+
+ if (!mbuf)
+ return QLA_FUNCTION_FAILED;
+
+ memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
+ memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
+ memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
+ memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
+
+ dcode = mbuf;
+
+ /* Begin with first PCI expansion ROM header. */
+ pcihdr = 0;
+ last_image = 1;
+ do {
+ /* Verify PCI expansion ROM header. */
+ qla24xx_read_flash_data(ha, dcode, pcihdr >> 2, 0x20);
+ bcode = mbuf + (pcihdr % 4);
+ if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) {
+ /* No signature */
+ DEBUG2(printk("scsi(%ld): No matching ROM "
+ "signature.\n", ha->host_no));
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
+
+ /* Locate PCI data structure. */
+ pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
+
+ qla24xx_read_flash_data(ha, dcode, pcids >> 2, 0x20);
+ bcode = mbuf + (pcihdr % 4);
+
+ /* Validate signature of PCI data structure. */
+ if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
+ bcode[0x2] != 'I' || bcode[0x3] != 'R') {
+ /* Incorrect header. */
+ DEBUG2(printk("%s(): PCI data struct not found "
+ "pcir_adr=%x.\n", __func__, pcids));
+ ret = QLA_FUNCTION_FAILED;
+ break;
+ }
+
+ /* Read version */
+ code_type = bcode[0x14];
+ switch (code_type) {
+ case ROM_CODE_TYPE_BIOS:
+ /* Intel x86, PC-AT compatible. */
+ ha->bios_revision[0] = bcode[0x12];
+ ha->bios_revision[1] = bcode[0x13];
+ DEBUG3(printk("%s(): read BIOS %d.%d.\n", __func__,
+ ha->bios_revision[1], ha->bios_revision[0]));
+ break;
+ case ROM_CODE_TYPE_FCODE:
+ /* Open Firmware standard for PCI (FCode). */
+ ha->fcode_revision[0] = bcode[0x12];
+ ha->fcode_revision[1] = bcode[0x13];
+ DEBUG3(printk("%s(): read FCODE %d.%d.\n", __func__,
+ ha->fcode_revision[1], ha->fcode_revision[0]));
+ break;
+ case ROM_CODE_TYPE_EFI:
+ /* Extensible Firmware Interface (EFI). */
+ ha->efi_revision[0] = bcode[0x12];
+ ha->efi_revision[1] = bcode[0x13];
+ DEBUG3(printk("%s(): read EFI %d.%d.\n", __func__,
+ ha->efi_revision[1], ha->efi_revision[0]));
+ break;
+ default:
+ DEBUG2(printk("%s(): Unrecognized code type %x at "
+ "pcids %x.\n", __func__, code_type, pcids));
+ break;
+ }
+
+ last_image = bcode[0x15] & BIT_7;
+
+ /* Locate next PCI expansion ROM. */
+ pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
+ } while (!last_image);
+
+ /* Read firmware image information. */
+ memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
+ dcode = mbuf;
+
+ qla24xx_read_flash_data(ha, dcode, FA_RISC_CODE_ADDR + 4, 4);
+ for (i = 0; i < 4; i++)
+ dcode[i] = be32_to_cpu(dcode[i]);
+
+ if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
+ dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ DEBUG2(printk("%s(): Unrecognized fw version at %x.\n",
+ __func__, FA_RISC_CODE_ADDR));
+ } else {
+ ha->fw_revision[0] = dcode[0];
+ ha->fw_revision[1] = dcode[1];
+ ha->fw_revision[2] = dcode[2];
+ ha->fw_revision[3] = dcode[3];
+ }
+
+ return ret;
+}
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 459e0d6bd2b..61347aee55c 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.01.07-k4"
+#define QLA2XXX_VERSION "8.01.07-k5"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 1
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 24cffd98ee6..f33e2eb9f1b 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -673,27 +673,6 @@ void __scsi_done(struct scsi_cmnd *cmd)
}
/*
- * Function: scsi_retry_command
- *
- * Purpose: Send a command back to the low level to be retried.
- *
- * Notes: This command is always executed in the context of the
- * bottom half handler, or the error handler thread. Low
- * level drivers should not become re-entrant as a result of
- * this.
- */
-int scsi_retry_command(struct scsi_cmnd *cmd)
-{
- /*
- * Zero the sense information from the last time we tried
- * this command.
- */
- memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
-
- return scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
-}
-
-/*
* Function: scsi_finish_command
*
* Purpose: Pass command off to upper layer for finishing of I/O
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 30ee3d72c02..5adbbeedec3 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -51,10 +51,10 @@
#include "scsi_logging.h"
#include "scsi_debug.h"
-#define SCSI_DEBUG_VERSION "1.80"
-static const char * scsi_debug_version_date = "20061018";
+#define SCSI_DEBUG_VERSION "1.81"
+static const char * scsi_debug_version_date = "20070104";
-/* Additional Sense Code (ASC) used */
+/* Additional Sense Code (ASC) */
#define NO_ADDITIONAL_SENSE 0x0
#define LOGICAL_UNIT_NOT_READY 0x4
#define UNRECOVERED_READ_ERR 0x11
@@ -65,9 +65,13 @@ static const char * scsi_debug_version_date = "20061018";
#define INVALID_FIELD_IN_PARAM_LIST 0x26
#define POWERON_RESET 0x29
#define SAVING_PARAMS_UNSUP 0x39
+#define TRANSPORT_PROBLEM 0x4b
#define THRESHOLD_EXCEEDED 0x5d
#define LOW_POWER_COND_ON 0x5e
+/* Additional Sense Code Qualifier (ASCQ) */
+#define ACK_NAK_TO 0x3
+
#define SDEBUG_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */
/* Default values for driver parameters */
@@ -95,15 +99,20 @@ static const char * scsi_debug_version_date = "20061018";
#define SCSI_DEBUG_OPT_MEDIUM_ERR 2
#define SCSI_DEBUG_OPT_TIMEOUT 4
#define SCSI_DEBUG_OPT_RECOVERED_ERR 8
+#define SCSI_DEBUG_OPT_TRANSPORT_ERR 16
/* When "every_nth" > 0 then modulo "every_nth" commands:
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
* - a RECOVERED_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
+ * - a TRANSPORT_ERROR is simulated on successful read and write
+ * commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
*
* When "every_nth" < 0 then after "- every_nth" commands:
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
* - a RECOVERED_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
+ * - a TRANSPORT_ERROR is simulated on successful read and write
+ * commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
* This will continue until some other action occurs (e.g. the user
* writing a new value (other than -1 or 1) to every_nth via sysfs).
*/
@@ -315,6 +324,7 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
int target = SCpnt->device->id;
struct sdebug_dev_info * devip = NULL;
int inj_recovered = 0;
+ int inj_transport = 0;
int delay_override = 0;
if (done == NULL)
@@ -352,6 +362,8 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
return 0; /* ignore command causing timeout */
else if (SCSI_DEBUG_OPT_RECOVERED_ERR & scsi_debug_opts)
inj_recovered = 1; /* to reads and writes below */
+ else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts)
+ inj_transport = 1; /* to reads and writes below */
}
if (devip->wlun) {
@@ -468,7 +480,11 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
mk_sense_buffer(devip, RECOVERED_ERROR,
THRESHOLD_EXCEEDED, 0);
errsts = check_condition_result;
- }
+ } else if (inj_transport && (0 == errsts)) {
+ mk_sense_buffer(devip, ABORTED_COMMAND,
+ TRANSPORT_PROBLEM, ACK_NAK_TO);
+ errsts = check_condition_result;
+ }
break;
case REPORT_LUNS: /* mandatory, ignore unit attention */
delay_override = 1;
@@ -531,6 +547,9 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
delay_override = 1;
errsts = check_readiness(SCpnt, 0, devip);
break;
+ case WRITE_BUFFER:
+ errsts = check_readiness(SCpnt, 1, devip);
+ break;
default:
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: Opcode: 0x%x not "
@@ -954,7 +973,9 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target,
int alloc_len, n, ret;
alloc_len = (cmd[3] << 8) + cmd[4];
- arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_KERNEL);
+ arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC);
+ if (! arr)
+ return DID_REQUEUE << 16;
if (devip->wlun)
pq_pdt = 0x1e; /* present, wlun */
else if (scsi_debug_no_lun_0 && (0 == devip->lun))
@@ -1217,7 +1238,9 @@ static int resp_report_tgtpgs(struct scsi_cmnd * scp,
alen = ((cmd[6] << 24) + (cmd[7] << 16) + (cmd[8] << 8)
+ cmd[9]);
- arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_KERNEL);
+ arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);
+ if (! arr)
+ return DID_REQUEUE << 16;
/*
* EVPD page 0x88 states we have two ports, one
* real and a fake port with no device connected.
@@ -1996,6 +2019,8 @@ static int scsi_debug_slave_configure(struct scsi_device * sdp)
if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
devip = devInfoReg(sdp);
+ if (NULL == devip)
+ return 1; /* no resources, will be marked offline */
sdp->hostdata = devip;
if (sdp->host->cmd_per_lun)
scsi_adjust_queue_depth(sdp, SDEBUG_TAGGED_QUEUING,
@@ -2044,7 +2069,7 @@ static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
}
}
if (NULL == open_devip) { /* try and make a new one */
- open_devip = kzalloc(sizeof(*open_devip),GFP_KERNEL);
+ open_devip = kzalloc(sizeof(*open_devip),GFP_ATOMIC);
if (NULL == open_devip) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__FUNCTION__, __LINE__);
@@ -2388,7 +2413,7 @@ MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)");
-MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->... (def=0)");
+MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
@@ -2943,7 +2968,6 @@ static int sdebug_add_adapter(void)
struct list_head *lh, *lh_sf;
sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL);
-
if (NULL == sdbg_host) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__FUNCTION__, __LINE__);
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 2ecb6ff4244..b8edcf5b545 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -359,6 +359,11 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
return SUCCESS;
case MEDIUM_ERROR:
+ if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
+ sshdr.asc == 0x13 || /* AMNF DATA FIELD */
+ sshdr.asc == 0x14) { /* RECORD NOT FOUND */
+ return SUCCESS;
+ }
return NEEDS_RETRY;
case HARDWARE_ERROR:
@@ -453,6 +458,128 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
}
/**
+ * scsi_try_host_reset - ask host adapter to reset itself
+ * @scmd: SCSI cmd to send hsot reset.
+ **/
+static int scsi_try_host_reset(struct scsi_cmnd *scmd)
+{
+ unsigned long flags;
+ int rtn;
+
+ SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
+ __FUNCTION__));
+
+ if (!scmd->device->host->hostt->eh_host_reset_handler)
+ return FAILED;
+
+ rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd);
+
+ if (rtn == SUCCESS) {
+ if (!scmd->device->host->hostt->skip_settle_delay)
+ ssleep(HOST_RESET_SETTLE_TIME);
+ spin_lock_irqsave(scmd->device->host->host_lock, flags);
+ scsi_report_bus_reset(scmd->device->host,
+ scmd_channel(scmd));
+ spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
+ }
+
+ return rtn;
+}
+
+/**
+ * scsi_try_bus_reset - ask host to perform a bus reset
+ * @scmd: SCSI cmd to send bus reset.
+ **/
+static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
+{
+ unsigned long flags;
+ int rtn;
+
+ SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
+ __FUNCTION__));
+
+ if (!scmd->device->host->hostt->eh_bus_reset_handler)
+ return FAILED;
+
+ rtn = scmd->device->host->hostt->eh_bus_reset_handler(scmd);
+
+ if (rtn == SUCCESS) {
+ if (!scmd->device->host->hostt->skip_settle_delay)
+ ssleep(BUS_RESET_SETTLE_TIME);
+ spin_lock_irqsave(scmd->device->host->host_lock, flags);
+ scsi_report_bus_reset(scmd->device->host,
+ scmd_channel(scmd));
+ spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
+ }
+
+ return rtn;
+}
+
+/**
+ * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
+ * @scmd: SCSI cmd used to send BDR
+ *
+ * Notes:
+ * There is no timeout for this operation. if this operation is
+ * unreliable for a given host, then the host itself needs to put a
+ * timer on it, and set the host back to a consistent state prior to
+ * returning.
+ **/
+static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
+{
+ int rtn;
+
+ if (!scmd->device->host->hostt->eh_device_reset_handler)
+ return FAILED;
+
+ rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd);
+ if (rtn == SUCCESS) {
+ scmd->device->was_reset = 1;
+ scmd->device->expecting_cc_ua = 1;
+ }
+
+ return rtn;
+}
+
+static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+{
+ if (!scmd->device->host->hostt->eh_abort_handler)
+ return FAILED;
+
+ return scmd->device->host->hostt->eh_abort_handler(scmd);
+}
+
+/**
+ * scsi_try_to_abort_cmd - Ask host to abort a running command.
+ * @scmd: SCSI cmd to abort from Lower Level.
+ *
+ * Notes:
+ * This function will not return until the user's completion function
+ * has been called. there is no timeout on this operation. if the
+ * author of the low-level driver wishes this operation to be timed,
+ * they can provide this facility themselves. helper functions in
+ * scsi_error.c can be supplied to make this easier to do.
+ **/
+static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+{
+ /*
+ * scsi_done was called just after the command timed out and before
+ * we had a chance to process it. (db)
+ */
+ if (scmd->serial_number == 0)
+ return SUCCESS;
+ return __scsi_try_to_abort_cmd(scmd);
+}
+
+static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
+{
+ if (__scsi_try_to_abort_cmd(scmd) != SUCCESS)
+ if (scsi_try_bus_device_reset(scmd) != SUCCESS)
+ if (scsi_try_bus_reset(scmd) != SUCCESS)
+ scsi_try_host_reset(scmd);
+}
+
+/**
* scsi_send_eh_cmnd - submit a scsi command as part of error recory
* @scmd: SCSI command structure to hijack
* @cmnd: CDB to send
@@ -579,13 +706,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
break;
}
} else {
- /*
- * FIXME(eric) - we are not tracking whether we could
- * abort a timed out command or not. not sure how
- * we should treat them differently anyways.
- */
- if (shost->hostt->eh_abort_handler)
- shost->hostt->eh_abort_handler(scmd);
+ scsi_abort_eh_cmnd(scmd);
rtn = FAILED;
}
@@ -672,8 +793,8 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd);
* XXX: Long term this code should go away, but that needs an audit of
* all LLDDs first.
**/
-static int scsi_eh_get_sense(struct list_head *work_q,
- struct list_head *done_q)
+int scsi_eh_get_sense(struct list_head *work_q,
+ struct list_head *done_q)
{
struct scsi_cmnd *scmd, *next;
int rtn;
@@ -715,31 +836,7 @@ static int scsi_eh_get_sense(struct list_head *work_q,
return list_empty(work_q);
}
-
-/**
- * scsi_try_to_abort_cmd - Ask host to abort a running command.
- * @scmd: SCSI cmd to abort from Lower Level.
- *
- * Notes:
- * This function will not return until the user's completion function
- * has been called. there is no timeout on this operation. if the
- * author of the low-level driver wishes this operation to be timed,
- * they can provide this facility themselves. helper functions in
- * scsi_error.c can be supplied to make this easier to do.
- **/
-static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
-{
- if (!scmd->device->host->hostt->eh_abort_handler)
- return FAILED;
-
- /*
- * scsi_done was called just after the command timed out and before
- * we had a chance to process it. (db)
- */
- if (scmd->serial_number == 0)
- return SUCCESS;
- return scmd->device->host->hostt->eh_abort_handler(scmd);
-}
+EXPORT_SYMBOL_GPL(scsi_eh_get_sense);
/**
* scsi_eh_tur - Send TUR to device.
@@ -815,32 +912,6 @@ static int scsi_eh_abort_cmds(struct list_head *work_q,
}
/**
- * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
- * @scmd: SCSI cmd used to send BDR
- *
- * Notes:
- * There is no timeout for this operation. if this operation is
- * unreliable for a given host, then the host itself needs to put a
- * timer on it, and set the host back to a consistent state prior to
- * returning.
- **/
-static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
-{
- int rtn;
-
- if (!scmd->device->host->hostt->eh_device_reset_handler)
- return FAILED;
-
- rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd);
- if (rtn == SUCCESS) {
- scmd->device->was_reset = 1;
- scmd->device->expecting_cc_ua = 1;
- }
-
- return rtn;
-}
-
-/**
* scsi_eh_try_stu - Send START_UNIT to device.
* @scmd: Scsi cmd to send START_UNIT
*
@@ -971,64 +1042,6 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost,
}
/**
- * scsi_try_bus_reset - ask host to perform a bus reset
- * @scmd: SCSI cmd to send bus reset.
- **/
-static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
-{
- unsigned long flags;
- int rtn;
-
- SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
- __FUNCTION__));
-
- if (!scmd->device->host->hostt->eh_bus_reset_handler)
- return FAILED;
-
- rtn = scmd->device->host->hostt->eh_bus_reset_handler(scmd);
-
- if (rtn == SUCCESS) {
- if (!scmd->device->host->hostt->skip_settle_delay)
- ssleep(BUS_RESET_SETTLE_TIME);
- spin_lock_irqsave(scmd->device->host->host_lock, flags);
- scsi_report_bus_reset(scmd->device->host,
- scmd_channel(scmd));
- spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
- }
-
- return rtn;
-}
-
-/**
- * scsi_try_host_reset - ask host adapter to reset itself
- * @scmd: SCSI cmd to send hsot reset.
- **/
-static int scsi_try_host_reset(struct scsi_cmnd *scmd)
-{
- unsigned long flags;
- int rtn;
-
- SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
- __FUNCTION__));
-
- if (!scmd->device->host->hostt->eh_host_reset_handler)
- return FAILED;
-
- rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd);
-
- if (rtn == SUCCESS) {
- if (!scmd->device->host->hostt->skip_settle_delay)
- ssleep(HOST_RESET_SETTLE_TIME);
- spin_lock_irqsave(scmd->device->host->host_lock, flags);
- scsi_report_bus_reset(scmd->device->host,
- scmd_channel(scmd));
- spin_unlock_irqrestore(scmd->device->host->host_lock, flags);
- }
-
- return rtn;
-}
-
-/**
* scsi_eh_bus_reset - send a bus reset
* @shost: scsi host being recovered.
* @eh_done_q: list_head for processed commands.
@@ -1411,9 +1424,9 @@ static void scsi_restart_operations(struct Scsi_Host *shost)
* @eh_done_q: list_head for processed commands.
*
**/
-static void scsi_eh_ready_devs(struct Scsi_Host *shost,
- struct list_head *work_q,
- struct list_head *done_q)
+void scsi_eh_ready_devs(struct Scsi_Host *shost,
+ struct list_head *work_q,
+ struct list_head *done_q)
{
if (!scsi_eh_stu(shost, work_q, done_q))
if (!scsi_eh_bus_device_reset(shost, work_q, done_q))
@@ -1421,6 +1434,7 @@ static void scsi_eh_ready_devs(struct Scsi_Host *shost,
if (!scsi_eh_host_reset(work_q, done_q))
scsi_eh_offline_sdevs(work_q, done_q);
}
+EXPORT_SYMBOL_GPL(scsi_eh_ready_devs);
/**
* scsi_eh_flush_done_q - finish processed commands or retry them.
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index a1cd6e6a292..9f7482d0b59 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1399,7 +1399,7 @@ static void scsi_softirq_done(struct request *rq)
scsi_finish_command(cmd);
break;
case NEEDS_RETRY:
- scsi_retry_command(cmd);
+ scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
break;
case ADD_TO_MLQUEUE:
scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
@@ -2249,6 +2249,8 @@ void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
size_t sg_len = 0, len_complete = 0;
struct page *page;
+ WARN_ON(!irqs_disabled());
+
for (i = 0; i < sg_count; i++) {
len_complete = sg_len; /* Complete sg-entries */
sg_len += sg[i].length;
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index f458c2f686d..ee8efe849bf 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -28,7 +28,6 @@ extern int scsi_dispatch_cmd(struct scsi_cmnd *cmd);
extern int scsi_setup_command_freelist(struct Scsi_Host *shost);
extern void scsi_destroy_command_freelist(struct Scsi_Host *shost);
extern void __scsi_done(struct scsi_cmnd *cmd);
-extern int scsi_retry_command(struct scsi_cmnd *cmd);
#ifdef CONFIG_SCSI_LOGGING
void scsi_log_send(struct scsi_cmnd *cmd);
void scsi_log_completion(struct scsi_cmnd *cmd, int disposition);
@@ -58,6 +57,11 @@ extern int scsi_error_handler(void *host);
extern int scsi_decide_disposition(struct scsi_cmnd *cmd);
extern void scsi_eh_wakeup(struct Scsi_Host *shost);
extern int scsi_eh_scmd_add(struct scsi_cmnd *, int);
+void scsi_eh_ready_devs(struct Scsi_Host *shost,
+ struct list_head *work_q,
+ struct list_head *done_q);
+int scsi_eh_get_sense(struct list_head *work_q,
+ struct list_head *done_q);
/* scsi_lib.c */
extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 96b7cbd746a..a43b9ec3aef 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1029,7 +1029,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
sdev_printk(KERN_INFO, sdev,
"scsi scan: consider passing scsi_mod."
- "dev_flags=%s:%s:0x240 or 0x800240\n",
+ "dev_flags=%s:%s:0x240 or 0x1000240\n",
scsi_inq_str(vend, result, 8, 16),
scsi_inq_str(mod, result, 16, 32));
});
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index 5c0b75bbfa1..6d39150e205 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -336,6 +336,51 @@ show_sas_device_type(struct class_device *cdev, char *buf)
}
static CLASS_DEVICE_ATTR(device_type, S_IRUGO, show_sas_device_type, NULL);
+static ssize_t do_sas_phy_enable(struct class_device *cdev,
+ size_t count, int enable)
+{
+ struct sas_phy *phy = transport_class_to_phy(cdev);
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ struct sas_internal *i = to_sas_internal(shost->transportt);
+ int error;
+
+ error = i->f->phy_enable(phy, enable);
+ if (error)
+ return error;
+ phy->enabled = enable;
+ return count;
+};
+
+static ssize_t store_sas_phy_enable(struct class_device *cdev,
+ const char *buf, size_t count)
+{
+ if (count < 1)
+ return -EINVAL;
+
+ switch (buf[0]) {
+ case '0':
+ do_sas_phy_enable(cdev, count, 0);
+ break;
+ case '1':
+ do_sas_phy_enable(cdev, count, 1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static ssize_t show_sas_phy_enable(struct class_device *cdev, char *buf)
+{
+ struct sas_phy *phy = transport_class_to_phy(cdev);
+
+ return snprintf(buf, 20, "%d", phy->enabled);
+}
+
+static CLASS_DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, show_sas_phy_enable,
+ store_sas_phy_enable);
+
static ssize_t do_sas_phy_reset(struct class_device *cdev,
size_t count, int hard_reset)
{
@@ -435,6 +480,7 @@ struct sas_phy *sas_phy_alloc(struct device *parent, int number)
return NULL;
phy->number = number;
+ phy->enabled = 1;
device_initialize(&phy->dev);
phy->dev.parent = get_device(parent);
@@ -579,8 +625,19 @@ static void sas_port_release(struct device *dev)
static void sas_port_create_link(struct sas_port *port,
struct sas_phy *phy)
{
- sysfs_create_link(&port->dev.kobj, &phy->dev.kobj, phy->dev.bus_id);
- sysfs_create_link(&phy->dev.kobj, &port->dev.kobj, "port");
+ int res;
+
+ res = sysfs_create_link(&port->dev.kobj, &phy->dev.kobj,
+ phy->dev.bus_id);
+ if (res)
+ goto err;
+ res = sysfs_create_link(&phy->dev.kobj, &port->dev.kobj, "port");
+ if (res)
+ goto err;
+ return;
+err:
+ printk(KERN_ERR "%s: Cannot create port links, err=%d\n",
+ __FUNCTION__, res);
}
static void sas_port_delete_link(struct sas_port *port,
@@ -818,13 +875,20 @@ EXPORT_SYMBOL(sas_port_delete_phy);
void sas_port_mark_backlink(struct sas_port *port)
{
+ int res;
struct device *parent = port->dev.parent->parent->parent;
if (port->is_backlink)
return;
port->is_backlink = 1;
- sysfs_create_link(&port->dev.kobj, &parent->kobj,
- parent->bus_id);
+ res = sysfs_create_link(&port->dev.kobj, &parent->kobj,
+ parent->bus_id);
+ if (res)
+ goto err;
+ return;
+err:
+ printk(KERN_ERR "%s: Cannot create port backlink, err=%d\n",
+ __FUNCTION__, res);
}
EXPORT_SYMBOL(sas_port_mark_backlink);
@@ -1237,7 +1301,7 @@ int sas_rphy_add(struct sas_rphy *rphy)
if (identify->device_type == SAS_END_DEVICE &&
rphy->scsi_target_id != -1) {
scsi_scan_target(&rphy->dev, 0,
- rphy->scsi_target_id, ~0, 0);
+ rphy->scsi_target_id, SCAN_WILD_CARD, 0);
}
return 0;
@@ -1253,7 +1317,7 @@ EXPORT_SYMBOL(sas_rphy_add);
* Note:
* This function must only be called on a remote
* PHY that has not sucessfully been added using
- * sas_rphy_add().
+ * sas_rphy_add() (or has been sas_rphy_remove()'d)
*/
void sas_rphy_free(struct sas_rphy *rphy)
{
@@ -1272,18 +1336,30 @@ void sas_rphy_free(struct sas_rphy *rphy)
EXPORT_SYMBOL(sas_rphy_free);
/**
- * sas_rphy_delete -- remove SAS remote PHY
- * @rphy: SAS remote PHY to remove
+ * sas_rphy_delete -- remove and free SAS remote PHY
+ * @rphy: SAS remote PHY to remove and free
*
- * Removes the specified SAS remote PHY.
+ * Removes the specified SAS remote PHY and frees it.
*/
void
sas_rphy_delete(struct sas_rphy *rphy)
{
+ sas_rphy_remove(rphy);
+ sas_rphy_free(rphy);
+}
+EXPORT_SYMBOL(sas_rphy_delete);
+
+/**
+ * sas_rphy_remove -- remove SAS remote PHY
+ * @rphy: SAS remote phy to remove
+ *
+ * Removes the specified SAS remote PHY.
+ */
+void
+sas_rphy_remove(struct sas_rphy *rphy)
+{
struct device *dev = &rphy->dev;
struct sas_port *parent = dev_to_sas_port(dev->parent);
- struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
- struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
switch (rphy->identify.device_type) {
case SAS_END_DEVICE:
@@ -1299,17 +1375,10 @@ sas_rphy_delete(struct sas_rphy *rphy)
transport_remove_device(dev);
device_del(dev);
- transport_destroy_device(dev);
-
- mutex_lock(&sas_host->lock);
- list_del(&rphy->list);
- mutex_unlock(&sas_host->lock);
parent->rphy = NULL;
-
- put_device(dev);
}
-EXPORT_SYMBOL(sas_rphy_delete);
+EXPORT_SYMBOL(sas_rphy_remove);
/**
* scsi_is_sas_rphy -- check if a struct device represents a SAS remote PHY
@@ -1389,6 +1458,10 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \
!i->f->set_phy_speed, S_IRUGO)
+#define SETUP_OPTIONAL_PHY_ATTRIBUTE_RW(field, func) \
+ SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \
+ !i->f->func, S_IRUGO)
+
#define SETUP_PORT_ATTRIBUTE(field) \
SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1)
@@ -1396,10 +1469,10 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, i->f->func)
#define SETUP_PHY_ATTRIBUTE_WRONLY(field) \
- SETUP_TEMPLATE(phy_attrs, field, S_IWUGO, 1)
+ SETUP_TEMPLATE(phy_attrs, field, S_IWUSR, 1)
#define SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(field, func) \
- SETUP_TEMPLATE(phy_attrs, field, S_IWUGO, i->f->func)
+ SETUP_TEMPLATE(phy_attrs, field, S_IWUSR, i->f->func)
#define SETUP_END_DEV_ATTRIBUTE(field) \
SETUP_TEMPLATE(end_dev_attrs, field, S_IRUGO, 1)
@@ -1479,6 +1552,7 @@ sas_attach_transport(struct sas_function_template *ft)
SETUP_PHY_ATTRIBUTE(phy_reset_problem_count);
SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(link_reset, phy_reset);
SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(hard_reset, phy_reset);
+ SETUP_OPTIONAL_PHY_ATTRIBUTE_RW(enable, phy_enable);
i->phy_attrs[count] = NULL;
count = 0;
@@ -1587,7 +1661,7 @@ static void __exit sas_transport_exit(void)
}
MODULE_AUTHOR("Christoph Hellwig");
-MODULE_DESCRIPTION("SAS Transphy Attributes");
+MODULE_DESCRIPTION("SAS Transport Attributes");
MODULE_LICENSE("GPL");
module_init(sas_transport_init);
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 014d7fea1ff..6f56f875063 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -46,7 +46,6 @@
* two cc/ua clears */
/* Private data accessors (keep these out of the header file) */
-#define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)
#define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
#define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c
index 551baccec52..018c65f73ac 100644
--- a/drivers/scsi/sim710.c
+++ b/drivers/scsi/sim710.c
@@ -123,6 +123,7 @@ sim710_probe_common(struct device *dev, unsigned long base_addr,
hostdata->differential = differential;
hostdata->clock = clock;
hostdata->chip710 = 1;
+ hostdata->burst_length = 8;
/* and register the chip */
if((host = NCR_700_detect(&sim710_driver_template, hostdata, dev))
diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c
new file mode 100644
index 00000000000..6bc50511584
--- /dev/null
+++ b/drivers/scsi/sni_53c710.c
@@ -0,0 +1,159 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* SNI RM driver
+ *
+ * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
+**-----------------------------------------------------------------------------
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+ */
+
+/*
+ * Based on lasi700.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/blkdev.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_spi.h>
+
+#include "53c700.h"
+
+MODULE_AUTHOR("Thomas Bogendörfer");
+MODULE_DESCRIPTION("SNI RM 53c710 SCSI Driver");
+MODULE_LICENSE("GPL");
+
+#define SNIRM710_CLOCK 32
+
+static struct scsi_host_template snirm710_template = {
+ .name = "SNI RM SCSI 53c710",
+ .proc_name = "snirm_53c710",
+ .this_id = 7,
+ .module = THIS_MODULE,
+};
+
+static int __init snirm710_probe(struct platform_device *dev)
+{
+ unsigned long base;
+ struct NCR_700_Host_Parameters *hostdata;
+ struct Scsi_Host *host;
+ struct resource *res;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ base = res->start;
+ hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
+ if (!hostdata) {
+ printk(KERN_ERR "%s: Failed to allocate host data\n",
+ dev->dev.bus_id);
+ return -ENOMEM;
+ }
+
+ hostdata->dev = &dev->dev;
+ dma_set_mask(&dev->dev, DMA_32BIT_MASK);
+ hostdata->base = ioremap_nocache(CPHYSADDR(base), 0x100);
+ hostdata->differential = 0;
+
+ hostdata->clock = SNIRM710_CLOCK;
+ hostdata->force_le_on_be = 1;
+ hostdata->chip710 = 1;
+ hostdata->burst_length = 4;
+
+ host = NCR_700_detect(&snirm710_template, hostdata, &dev->dev);
+ if (!host)
+ goto out_kfree;
+ host->this_id = 7;
+ host->base = base;
+ host->irq = platform_get_irq(dev, 0);
+ if(request_irq(host->irq, NCR_700_intr, SA_SHIRQ, "snirm710", host)) {
+ printk(KERN_ERR "snirm710: request_irq failed!\n");
+ goto out_put_host;
+ }
+
+ dev_set_drvdata(&dev->dev, host);
+ scsi_scan_host(host);
+
+ return 0;
+
+ out_put_host:
+ scsi_host_put(host);
+ out_kfree:
+ iounmap(hostdata->base);
+ kfree(hostdata);
+ return -ENODEV;
+}
+
+static int __exit snirm710_driver_remove(struct platform_device *dev)
+{
+ struct Scsi_Host *host = dev_get_drvdata(&dev->dev);
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ scsi_remove_host(host);
+ NCR_700_release(host);
+ free_irq(host->irq, host);
+ iounmap(hostdata->base);
+ kfree(hostdata);
+
+ return 0;
+}
+
+static struct platform_driver snirm710_driver = {
+ .probe = snirm710_probe,
+ .remove = __devexit_p(snirm710_driver_remove),
+ .driver = {
+ .name = "snirm_53c710",
+ },
+};
+
+static int __init snirm710_init(void)
+{
+ int err;
+
+ if ((err = platform_driver_register(&snirm710_driver))) {
+ printk(KERN_ERR "Driver registration failed\n");
+ return err;
+ }
+ return 0;
+}
+
+static void __exit snirm710_exit(void)
+{
+ platform_driver_unregister(&snirm710_driver);
+}
+
+module_init(snirm710_init);
+module_exit(snirm710_exit);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 488ec7948a5..16e279be4a3 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -9,7 +9,7 @@
Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
Michael Schaefer, J"org Weule, and Eric Youngdale.
- Copyright 1992 - 2006 Kai Makisara
+ Copyright 1992 - 2007 Kai Makisara
email Kai.Makisara@kolumbus.fi
Some small formal changes - aeb, 950809
@@ -17,7 +17,7 @@
Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
*/
-static const char *verstr = "20061107";
+static const char *verstr = "20070203";
#include <linux/module.h>
@@ -1168,6 +1168,7 @@ static int st_open(struct inode *inode, struct file *filp)
STps = &(STp->ps[i]);
STps->rw = ST_IDLE;
}
+ STp->try_dio_now = STp->try_dio;
STp->recover_count = 0;
DEB( STp->nbr_waits = STp->nbr_finished = 0;
STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = STp->nbr_combinable = 0; )
@@ -1400,9 +1401,9 @@ static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
struct st_buffer *STbp = STp->buffer;
if (is_read)
- i = STp->try_dio && try_rdio;
+ i = STp->try_dio_now && try_rdio;
else
- i = STp->try_dio && try_wdio;
+ i = STp->try_dio_now && try_wdio;
if (i && ((unsigned long)buf & queue_dma_alignment(
STp->device->request_queue)) == 0) {
@@ -1599,7 +1600,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
STm->do_async_writes && STps->eof < ST_EOM_OK;
if (STp->block_size != 0 && STm->do_buffer_writes &&
- !(STp->try_dio && try_wdio) && STps->eof < ST_EOM_OK &&
+ !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
STbp->buffer_bytes < STbp->buffer_size) {
STp->dirty = 1;
/* Don't write a buffer that is not full enough. */
@@ -1769,7 +1770,7 @@ static long read_tape(struct scsi_tape *STp, long count,
if (STp->block_size == 0)
blks = bytes = count;
else {
- if (!(STp->try_dio && try_rdio) && STm->do_read_ahead) {
+ if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
blks = (STp->buffer)->buffer_blocks;
bytes = blks * STp->block_size;
} else {
@@ -1948,10 +1949,12 @@ st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
goto out;
STm = &(STp->modes[STp->current_mode]);
- if (!(STm->do_read_ahead) && STp->block_size != 0 &&
- (count % STp->block_size) != 0) {
- retval = (-EINVAL); /* Read must be integral number of blocks */
- goto out;
+ if (STp->block_size != 0 && (count % STp->block_size) != 0) {
+ if (!STm->do_read_ahead) {
+ retval = (-EINVAL); /* Read must be integral number of blocks */
+ goto out;
+ }
+ STp->try_dio_now = 0; /* Direct i/o can't handle split blocks */
}
STps = &(STp->ps[STp->partition]);
diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h
index 05a5cae126e..50f3deb1f9e 100644
--- a/drivers/scsi/st.h
+++ b/drivers/scsi/st.h
@@ -117,7 +117,8 @@ struct scsi_tape {
unsigned char cln_sense_value;
unsigned char cln_sense_mask;
unsigned char use_pf; /* Set Page Format bit in all mode selects? */
- unsigned char try_dio; /* try direct i/o? */
+ unsigned char try_dio; /* try direct i/o in general? */
+ unsigned char try_dio_now; /* try direct i/o before next close? */
unsigned char c_algo; /* compression algorithm */
unsigned char pos_unknown; /* after reset position unknown */
int tape_type;
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 0689e004a28..ad0182ef780 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -323,12 +323,20 @@ struct sas_ha_event {
struct sas_ha_struct *ha;
};
+enum sas_ha_state {
+ SAS_HA_REGISTERED,
+ SAS_HA_UNREGISTERED
+};
+
struct sas_ha_struct {
/* private: */
spinlock_t event_lock;
struct sas_ha_event ha_events[HA_NUM_EVENTS];
unsigned long pending;
+ enum sas_ha_state state;
+ spinlock_t state_lock;
+
struct scsi_core core;
/* public: */
@@ -553,7 +561,8 @@ struct sas_task {
#define SAS_TASK_STATE_PENDING 1
#define SAS_TASK_STATE_DONE 2
#define SAS_TASK_STATE_ABORTED 4
-#define SAS_TASK_INITIATOR_ABORTED 8
+#define SAS_TASK_NEED_DEV_RESET 8
+#define SAS_TASK_AT_INITIATOR 16
static inline struct sas_task *sas_alloc_task(gfp_t flags)
{
@@ -612,6 +621,9 @@ struct sas_domain_function_template {
extern int sas_register_ha(struct sas_ha_struct *);
extern int sas_unregister_ha(struct sas_ha_struct *);
+int sas_set_phy_speed(struct sas_phy *phy,
+ struct sas_phy_linkrates *rates);
+int sas_phy_enable(struct sas_phy *phy, int enabled);
int sas_phy_reset(struct sas_phy *phy, int hard_reset);
extern int sas_queuecommand(struct scsi_cmnd *,
void (*scsi_done)(struct scsi_cmnd *));
@@ -645,6 +657,9 @@ void sas_unregister_dev(struct domain_device *);
void sas_init_dev(struct domain_device *);
-void sas_task_abort(struct work_struct *);
+void sas_task_abort(struct sas_task *);
+int __sas_task_abort(struct sas_task *);
+int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
+int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd);
#endif /* _SASLIB_H_ */
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 59633a82de4..9aedc19820b 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -54,6 +54,7 @@ struct sas_identify {
struct sas_phy {
struct device dev;
int number;
+ int enabled;
/* phy identification */
struct sas_identify identify;
@@ -163,6 +164,7 @@ struct sas_function_template {
int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
int (*get_bay_identifier)(struct sas_rphy *);
int (*phy_reset)(struct sas_phy *, int);
+ int (*phy_enable)(struct sas_phy *, int);
int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
};
@@ -180,6 +182,7 @@ extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
void sas_rphy_free(struct sas_rphy *);
extern int sas_rphy_add(struct sas_rphy *);
+extern void sas_rphy_remove(struct sas_rphy *);
extern void sas_rphy_delete(struct sas_rphy *);
extern int scsi_is_sas_rphy(const struct device *);
diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
index da180f73847..286e9628ed8 100644
--- a/include/scsi/scsi_transport_spi.h
+++ b/include/scsi/scsi_transport_spi.h
@@ -85,6 +85,7 @@ struct spi_host_attrs {
#define spi_pcomp_en(x) (((struct spi_transport_attrs *)&(x)->starget_data)->pcomp_en)
#define spi_hold_mcs(x) (((struct spi_transport_attrs *)&(x)->starget_data)->hold_mcs)
#define spi_initial_dv(x) (((struct spi_transport_attrs *)&(x)->starget_data)->initial_dv)
+#define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)
#define spi_support_sync(x) (((struct spi_transport_attrs *)&(x)->starget_data)->support_sync)
#define spi_support_wide(x) (((struct spi_transport_attrs *)&(x)->starget_data)->support_wide)