[ARM] 3041/1: AAEC-2000 - CLCD controller platform glue

Patch from Bellido Nicolas

The AAEC-2000 has an ARM PrimeCell PL110 Color LCD Controller.
This patch contains the platform glue that will be used by specific boards.

Signed-off-by: Nicolas Bellido <ml@acolin.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 105 insertions, 0 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d885cc48bae..682367bd0f6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -204,6 +204,7 @@ config ARCH_H720X
 
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
+	select ARM_AMBA
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index 86c5149b172..0c53dab8090 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -16,18 +16,24 @@
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/signal.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/hardware/amba.h>
 
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 
+#include "core.h"
+#include "clock.h"
+
 /*
  * Common I/O mapping:
  *
@@ -165,6 +171,81 @@ struct sys_timer aaec2000_timer = {
 	.offset		= aaec2000_gettimeoffset,
 };
 
+static struct clcd_panel mach_clcd_panel;
+
+static int aaec2000_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->panel = &mach_clcd_panel;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
+			&dma, GFP_KERNEL);
+
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = SZ_1M;
+
+	return 0;
+}
+
+static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+			fb->fb.screen_base,
+			fb->fb.fix.smem_start,
+			fb->fb.fix.smem_len);
+}
+
+static void aaec2000_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+			fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board clcd_plat_data = {
+	.name	= "AAEC-2000",
+	.check	= clcdfb_check,
+	.decode	= clcdfb_decode,
+	.setup	= aaec2000_clcd_setup,
+	.mmap	= aaec2000_clcd_mmap,
+	.remove	= aaec2000_clcd_remove,
+};
+
+static struct amba_device clcd_device = {
+	.dev		= {
+		.bus_id			= "mb:16",
+		.coherent_dma_mask	= ~0,
+		.platform_data		= &clcd_plat_data,
+	},
+	.res		= {
+		.start			= AAEC_CLCD_PHYS,
+		.end			= AAEC_CLCD_PHYS + SZ_4K - 1,
+		.flags			= IORESOURCE_MEM,
+	},
+	.irq		= { INT_LCD, NO_IRQ },
+	.periphid	= 0x41110,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&clcd_device,
+};
+
+static struct clk aaec2000_clcd_clk = {
+	.name = "CLCDCLK",
+};
+
+void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
+{
+	clcd_plat_data.enable = clcd->enable;
+	clcd_plat_data.disable = clcd->disable;
+	memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
+}
+
 static struct flash_platform_data aaec2000_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 4,
@@ -188,6 +269,15 @@ static struct platform_device aaec2000_flash_device = {
 
 static int __init aaec2000_init(void)
 {
+	int i;
+
+	clk_register(&aaec2000_clcd_clk);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
 	platform_device_register(&aaec2000_flash_device);
 
 	return 0;
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
index 91893d848c1..daefc0ea14a 100644
--- a/arch/arm/mach-aaec2000/core.h
+++ b/arch/arm/mach-aaec2000/core.h
@@ -9,8 +9,19 @@
  *
  */
 
+#include <asm/hardware/amba_clcd.h>
+
 struct sys_timer;
 
 extern struct sys_timer aaec2000_timer;
 extern void __init aaec2000_map_io(void);
 extern void __init aaec2000_init_irq(void);
+
+struct aaec2000_clcd_info {
+	struct clcd_panel panel;
+	void (*disable)(struct clcd_fb *);
+	void (*enable)(struct clcd_fb *);
+};
+
+extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);
+
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
index dfb09389ebc..002227924b9 100644
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ b/include/asm-arm/arch-aaec2000/aaec2000.h
@@ -201,4 +201,7 @@
 #define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
 #define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
 
+/* LCD Controller */
+#define AAEC_CLCD_PHYS	0x80003000
+
 #endif /* __ARM_ARCH_AAEC2000_H */