[ALSA] emu10k1: Add support for Audigy4 (not Pro)

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

6 files changed, 107 insertions, 21 deletions

diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
index 186e00ad9e7..884bbf54cd3 100644
--- a/include/sound/emu10k1.h
+++ b/include/sound/emu10k1.h
@@ -245,6 +245,7 @@
 #define A_IOCFG_GPOUT0		0x0044		/* analog/digital				*/
 #define A_IOCFG_DISABLE_ANALOG	0x0040		/* = 'enable' for Audigy2 (chiprev=4)		*/
 #define A_IOCFG_ENABLE_DIGITAL	0x0004
+#define A_IOCFG_ENABLE_DIGITAL_AUDIGY4	0x0080
 #define A_IOCFG_UNKNOWN_20      0x0020
 #define A_IOCFG_DISABLE_AC97_FRONT      0x0080  /* turn off ac97 front -> front (10k2.1)	*/
 #define A_IOCFG_GPOUT1		0x0002		/* IR? drive's internal bypass (?)		*/
@@ -1065,6 +1066,7 @@ struct snd_emu_chip_details {
 	unsigned char emu1212m;     /* EMU 1212m card */
 	unsigned char spi_dac;      /* SPI interface for DAC */
 	unsigned char i2c_adc;      /* I2C interface for ADC */
+	unsigned char adc_1361t;    /* Use Philips 1361T ADC */
 	const char *driver;
 	const char *name;
 	const char *id;		/* for backward compatibility - can be NULL if not needed */
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index d05200741ac..4544f6aa089 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -563,7 +563,7 @@ AC97_SINGLE("PC Speaker Playback Volume", AC97_PC_BEEP, 1, 15, 1)
 };
 
 static const struct snd_kcontrol_new snd_ac97_controls_mic_boost =
-	AC97_SINGLE("Mic Boost (+20dB)", AC97_MIC, 6, 1, 0);
+	AC97_SINGLE("Mic Boost (+20dB) Capture Switch", AC97_MIC, 6, 1, 0);
 
 
 static const char* std_rec_sel[] = {"Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone"};
@@ -605,7 +605,7 @@ AC97_SINGLE("Simulated Stereo Enhancement", AC97_GENERAL_PURPOSE, 14, 1, 0),
 AC97_SINGLE("3D Control - Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
 AC97_SINGLE("Loudness (bass boost)", AC97_GENERAL_PURPOSE, 12, 1, 0),
 AC97_ENUM("Mono Output Select", std_enum[2]),
-AC97_ENUM("Mic Select", std_enum[3]),
+AC97_ENUM("Mic Select Capture Switch", std_enum[3]),
 AC97_SINGLE("ADC/DAC Loopback", AC97_GENERAL_PURPOSE, 7, 1, 0)
 };
 
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 4d9cf37300f..7ae7bc6524e 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -563,7 +563,7 @@ AC97_SINGLE("Mic 1 to Phone Switch", AC97_MIC, 14, 1, 1),
 AC97_SINGLE("Mic 2 to Phone Switch", AC97_MIC, 13, 1, 1),
 AC97_ENUM("Mic Select Source", wm9711_enum[7]),
 AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 32, 1),
-AC97_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0),
+AC97_SINGLE("Mic 20dB Boost Capture Switch", AC97_MIC, 7, 1, 0),
 
 AC97_SINGLE("Master ZC Switch", AC97_MASTER, 7, 1, 0),
 AC97_SINGLE("Headphone ZC Switch", AC97_HEADPHONE, 7, 1, 0),
@@ -653,7 +653,7 @@ AC97_SINGLE("Mic 1 Volume", AC97_MIC, 8, 31, 1),
 AC97_SINGLE("Mic 2 Volume", AC97_MIC, 0, 31, 1),
 AC97_SINGLE("Mic 1 to Mono Switch", AC97_LINE, 7, 1, 1),
 AC97_SINGLE("Mic 2 to Mono Switch", AC97_LINE, 6, 1, 1),
-AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_LINE, 5, 1, 0),
+AC97_SINGLE("Mic Boost (+20dB) Capture Switch", AC97_LINE, 5, 1, 0),
 AC97_ENUM("Mic to Headphone Mux", wm9713_enum[0]),
 AC97_SINGLE("Mic Headphone Mixer Volume", AC97_LINE, 0, 7, 1),
 
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 6bfa08436ef..e71485c23cc 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -777,14 +777,6 @@ static int snd_emu10k1_dev_free(struct snd_device *device)
 
 static struct snd_emu_chip_details emu_chip_details[] = {
 	/* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/
-	/* Audigy4 SB0400 */
-	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
-	 .driver = "Audigy2", .name = "Audigy 4 [SB0400]", 
-	 .id = "Audigy2",
-	 .emu10k2_chip = 1,
-	 .ca0108_chip = 1,
-	 .spk71 = 1,
-	 .ac97_chip = 1} ,
 	/* Tested by James@superbug.co.uk 3rd July 2005 */
 	/* DSP: CA0108-IAT
 	 * DAC: CS4382-KQ
@@ -799,13 +791,59 @@ static struct snd_emu_chip_details emu_chip_details[] = {
 	 .ca0108_chip = 1,
 	 .spk71 = 1,
 	 .ac97_chip = 1} ,
+	/* Audigy4 (Not PRO) SB0610 */
+	/* Tested by James@superbug.co.uk 4th April 2006 */
+	/* A_IOCFG bits
+	 * Output
+	 * 0: ?
+	 * 1: ?
+	 * 2: ?
+	 * 3: 0 - Digital Out, 1 - Line in
+	 * 4: ?
+	 * 5: ?
+	 * 6: ?
+	 * 7: ?
+	 * Input
+	 * 8: ?
+	 * 9: ?
+	 * A: Green jack sense (Front)
+	 * B: ?
+	 * C: Black jack sense (Rear/Side Right)
+	 * D: Yellow jack sense (Center/LFE/Side Left)
+	 * E: ?
+	 * F: ?
+	 *
+	 * Digital Out/Line in switch using A_IOCFG bit 3 (0x08)
+	 * 0 - Digital Out
+	 * 1 - Line in
+	 */
+	/* Mic input not tested.
+	 * Analog CD input not tested
+	 * Digital Out not tested.
+	 * Line in working.
+	 * Audio output 5.1 working. Side outputs not working.
+	 */
+	/* DSP: CA10300-IAT LF
+	 * DAC: Cirrus Logic CS4382-KQZ
+	 * ADC: Philips 1361T
+	 * AC97: Sigmatel STAC9750
+	 * CA0151: None
+	 */
+	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
+	 .driver = "Audigy2", .name = "Audigy 4 [SB0610]", 
+	 .id = "Audigy2",
+	 .emu10k2_chip = 1,
+	 .ca0108_chip = 1,
+	 .spk71 = 1,
+	 .adc_1361t = 1,  /* 24 bit capture instead of 16bit */
+	 .ac97_chip = 1} ,
 	/* Audigy 2 ZS Notebook Cardbus card.*/
 	/* Tested by James@superbug.co.uk 22th December 2005 */
 	/* Audio output 7.1/Headphones working.
 	 * Digital output working. (AC3 not checked, only PCM)
 	 * Audio inputs not tested.
 	 */ 
-	/* DSP: Tiny2
+	/* DSP: Tina2
 	 * DAC: Wolfson WM8768/WM8568
 	 * ADC: Wolfson WM8775
 	 * AC97: None
diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c
index 2a9d12d1068..c31f3d0877f 100644
--- a/sound/pci/emu10k1/emumixer.c
+++ b/sound/pci/emu10k1/emumixer.c
@@ -777,6 +777,8 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 	};
 	static char *audigy_remove_ctls[] = {
 		/* Master/PCM controls on ac97 of Audigy has no effect */
+		/* On the Audigy2 the AC97 playback is piped into
+		 * the Philips ADC for 24bit capture */
 		"PCM Playback Switch",
 		"PCM Playback Volume",
 		"Master Mono Playback Switch",
@@ -804,6 +806,47 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 		"AMic Playback Volume", "Mic Playback Volume",
 		NULL
 	};
+	static char *audigy_remove_ctls_1361t_adc[] = {
+		/* On the Audigy2 the AC97 playback is piped into
+		 * the Philips ADC for 24bit capture */
+		"PCM Playback Switch",
+		"PCM Playback Volume",
+		"Master Mono Playback Switch",
+		"Master Mono Playback Volume",
+		"Capture Source",
+		"Capture Switch",
+		"Capture Volume",
+		"Mic Capture Volume",
+		"Headphone Playback Switch",
+		"Headphone Playback Volume",
+		"3D Control - Center",
+		"3D Control - Depth",
+		"3D Control - Switch",
+		"Line2 Playback Volume",
+		"Line2 Capture Volume",
+		NULL
+	};
+	static char *audigy_rename_ctls_1361t_adc[] = {
+		"Master Playback Switch", "Master Capture Switch",
+		"Master Playback Volume", "Master Capture Volume",
+		"Wave Master Playback Volume", "Master Playback Volume",
+		"PC Speaker Playback Switch", "PC Speaker Capture Switch",
+		"PC Speaker Playback Volume", "PC Speaker Capture Volume",
+		"Phone Playback Switch", "Phone Capture Switch",
+		"Phone Playback Volume", "Phone Capture Volume",
+		"Mic Playback Switch", "Mic Capture Switch",
+		"Mic Playback Volume", "Mic Capture Volume",
+		"Line Playback Switch", "Line Capture Switch",
+		"Line Playback Volume", "Line Capture Volume",
+		"CD Playback Switch", "CD Capture Switch",
+		"CD Playback Volume", "CD Capture Volume",
+		"Aux Playback Switch", "Aux Capture Switch",
+		"Aux Playback Volume", "Aux Capture Volume",
+		"Video Playback Switch", "Video Capture Switch",
+		"Video Playback Volume", "Video Capture Volume",
+
+		NULL
+	};
 
 	if (emu->card_capabilities->ac97_chip) {
 		struct snd_ac97_bus *pbus;
@@ -834,7 +877,10 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 			snd_ac97_write_cache(emu->ac97, AC97_MASTER, 0x0000);
 			/* set capture source to mic */
 			snd_ac97_write_cache(emu->ac97, AC97_REC_SEL, 0x0000);
-			c = audigy_remove_ctls;
+			if (emu->card_capabilities->adc_1361t)
+				c = audigy_remove_ctls_1361t_adc;
+			else 
+				c = audigy_remove_ctls;
 		} else {
 			/*
 			 * Credits for cards based on STAC9758:
@@ -863,11 +909,15 @@ int __devinit snd_emu10k1_mixer(struct snd_emu10k1 *emu,
 	}
 
 	if (emu->audigy)
-		c = audigy_rename_ctls;
+		if (emu->card_capabilities->adc_1361t)
+			c = audigy_rename_ctls_1361t_adc;
+		else
+			c = audigy_rename_ctls;
 	else
 		c = emu10k1_rename_ctls;
 	for (; *c; c += 2)
 		rename_ctl(card, c[0], c[1]);
+
 	if (emu->card_capabilities->subsystem == 0x20071102) {  /* Audigy 4 Pro */
 		rename_ctl(card, "Line2 Capture Volume", "Line1/Mic Capture Volume");
 		rename_ctl(card, "Analog Mix Capture Volume", "Line2 Capture Volume");
diff --git a/sound/pci/emu10k1/tina2.h b/sound/pci/emu10k1/tina2.h
index 5c43abf03e8..f2d8eb6c89e 100644
--- a/sound/pci/emu10k1/tina2.h
+++ b/sound/pci/emu10k1/tina2.h
@@ -1,11 +1,7 @@
 /*
  *  Copyright (c) by James Courtier-Dutton <James@superbug.demon.co.uk>
- *  Driver p16v chips
- *  Version: 0.21
- *
- *
- *  This code was initally based on code from ALSA's emu10k1x.c which is:
- *  Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
+ *  Driver tina2 chips
+ *  Version: 0.1
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by