Convert selectors of GENERIC_GPIO to GPIOLIB

GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>

25 files changed, 52 insertions, 52 deletions

diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 63521dc6c9d..468cd706be1 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -156,7 +156,7 @@ source "mm/Kconfig"
 
 config LEDS
 	def_bool y
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 
 config ALIGNMENT_TRAP
 	def_bool y
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 5168a1324a6..3297301a42d 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -16,7 +16,7 @@ comment "Extcon Device Drivers"
 
 config EXTCON_GPIO
 	tristate "GPIO extcon support"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index adfee98486b..631736e2e7e 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -363,7 +363,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
 
 config I2C_CBUS_GPIO
 	tristate "CBUS I2C driver"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Support for CBUS access using I2C API. Mostly relevant for Nokia
 	  Internet Tablets (770, N800 and N810).
@@ -436,7 +436,7 @@ config I2C_EG20T
 
 config I2C_GPIO
 	tristate "GPIO-based bitbanging I2C"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select I2C_ALGOBIT
 	help
 	  This is a very simple bitbanging I2C driver utilizing the
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 0be5b83c08f..40062ed83f3 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -7,7 +7,7 @@ menu "Multiplexer I2C Chip support"
 
 config I2C_MUX_GPIO
 	tristate "GPIO-based I2C multiplexer"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  If you say yes to this option, support will be included for a
 	  GPIO based I2C multiplexer. This driver provides access to
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ac050066700..772666f7d2b 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -175,7 +175,7 @@ config KEYBOARD_EP93XX
 
 config KEYBOARD_GPIO
 	tristate "GPIO Buttons"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  This driver implements support for buttons connected
 	  to GPIO pins of various CPUs (and some other chips).
@@ -190,7 +190,7 @@ config KEYBOARD_GPIO
 
 config KEYBOARD_GPIO_POLLED
 	tristate "Polled GPIO buttons"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select INPUT_POLLDEV
 	help
 	  This driver implements support for buttons connected
@@ -241,7 +241,7 @@ config KEYBOARD_TCA8418
 
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select INPUT_MATRIXKMAP
 	help
 	  Enable support for GPIO driven matrix keypad.
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 259ef31abb1..262cda21dcb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,7 +214,7 @@ config INPUT_APANEL
 config INPUT_GP2A
 	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
 	depends on I2C
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
 	  hooked to an I2C bus.
@@ -224,7 +224,7 @@ config INPUT_GP2A
 
 config INPUT_GPIO_TILT_POLLED
 	tristate "Polled GPIO tilt switch"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select INPUT_POLLDEV
 	help
 	  This driver implements support for tilt switches connected
@@ -472,7 +472,7 @@ config INPUT_PWM_BEEPER
 
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
-	depends on GPIOLIB && GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say Y here to add support for rotary encoders connected to GPIO lines.
 	  Check file:Documentation/input/rotary-encoder.txt for more
@@ -484,7 +484,7 @@ config INPUT_GPIO_ROTARY_ENCODER
 config INPUT_RB532_BUTTON
 	tristate "Mikrotik Routerboard 532 button interface"
 	depends on MIKROTIK_RB532
-	depends on GPIOLIB && GENERIC_GPIO
+	depends on GPIOLIB
 	select INPUT_POLLDEV
 	help
 	  Say Y here if you want support for the S1 button built into
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 802bd6a72d7..effa9c5f2c5 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -295,7 +295,7 @@ config MOUSE_VSXXXAA
 
 config MOUSE_GPIO
 	tristate "GPIO mouse"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select INPUT_POLLDEV
 	help
 	  This driver simulates a mouse on GPIO lines of various CPUs (and some
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ec50824c02e..2a531774f4d 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -173,7 +173,7 @@ config LEDS_PCA9532_GPIO
 config LEDS_GPIO
 	tristate "LED Support for GPIO connected LEDs"
 	depends on LEDS_CLASS
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  This option enables support for the LEDs connected to GPIO
 	  outputs. To be useful the particular board must have LEDs
@@ -352,7 +352,7 @@ config LEDS_INTEL_SS4200
 config LEDS_LT3593
 	tristate "LED driver for LT3593 controllers"
 	depends on LEDS_CLASS
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  This option enables support for LEDs driven by a Linear Technology
 	  LT3593 controller. This controller uses a special one-wire pulse
@@ -421,7 +421,7 @@ config LEDS_ASIC3
 
 config LEDS_RENESAS_TPU
 	bool "LED support for Renesas TPU"
-	depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO
+	depends on LEDS_CLASS=y && HAVE_CLK && GPIOLIB
 	help
 	  This option enables build of the LED TPU platform driver,
 	  suitable to drive any TPU channel on newer Renesas SoCs.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 3ed17c4d435..c26938382f6 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -419,7 +419,7 @@ config MTD_BFIN_ASYNC
 
 config MTD_GPIO_ADDR
 	tristate "GPIO-assisted Flash Chip Support"
-	depends on GENERIC_GPIO || GPIOLIB
+	depends on GPIOLIB
 	depends on MTD_COMPLEX_MAPPINGS
 	help
 	  Map driver which allows flashes to be partially physically addressed
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 81bf5e52601..5d54ad32697 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -89,7 +89,7 @@ config MTD_NAND_H1900
 
 config MTD_NAND_GPIO
 	tristate "GPIO NAND Flash driver"
-	depends on GENERIC_GPIO && ARM
+	depends on GPIOLIB && ARM
 	help
 	  This enables a GPIO based NAND flash driver.
 
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 450345261bd..1e11f2bfd9c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -126,7 +126,7 @@ config MDIO_BITBANG
 
 config MDIO_GPIO
 	tristate "Support for GPIO lib-based bitbanged MDIO buses"
-	depends on MDIO_BITBANG && GENERIC_GPIO
+	depends on MDIO_BITBANG && GPIOLIB
 	---help---
 	  Supports GPIO lib-based MDIO busses.
 
diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig
index c3340f54d2a..99ba8e4f2a3 100644
--- a/drivers/pinctrl/sh-pfc/Kconfig
+++ b/drivers/pinctrl/sh-pfc/Kconfig
@@ -6,7 +6,7 @@ if ARCH_SHMOBILE || SUPERH
 
 config PINCTRL_SH_PFC
 	# XXX move off the gpio dependency
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
 	select PINMUX
 	select PINCONF
@@ -34,19 +34,19 @@ config PINCTRL_PFC_R8A7779
 config PINCTRL_PFC_SH7203
 	def_bool y
 	depends on CPU_SUBTYPE_SH7203
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7264
 	def_bool y
 	depends on CPU_SUBTYPE_SH7264
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7269
 	def_bool y
 	depends on CPU_SUBTYPE_SH7269
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7372
@@ -62,55 +62,55 @@ config PINCTRL_PFC_SH73A0
 config PINCTRL_PFC_SH7720
 	def_bool y
 	depends on CPU_SUBTYPE_SH7720
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7722
 	def_bool y
 	depends on CPU_SUBTYPE_SH7722
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7723
 	def_bool y
 	depends on CPU_SUBTYPE_SH7723
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7724
 	def_bool y
 	depends on CPU_SUBTYPE_SH7724
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7734
 	def_bool y
 	depends on CPU_SUBTYPE_SH7734
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7757
 	def_bool y
 	depends on CPU_SUBTYPE_SH7757
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7785
 	def_bool y
 	depends on CPU_SUBTYPE_SH7785
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SH7786
 	def_bool y
 	depends on CPU_SUBTYPE_SH7786
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 config PINCTRL_PFC_SHX3
 	def_bool y
 	depends on CPU_SUBTYPE_SHX3
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select PINCTRL_SH_PFC
 
 endif
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a5d97eaee99..8bb26446037 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -66,7 +66,7 @@ config REGULATOR_USERSPACE_CONSUMER
 
 config REGULATOR_GPIO
 	tristate "GPIO regulator support"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  This driver provides support for regulators that can be
 	  controlled via gpios.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f80eee74a31..134b6f3d027 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -61,7 +61,7 @@ config SPI_ALTERA
 
 config SPI_ATH79
 	tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
-	depends on ATH79 && GENERIC_GPIO
+	depends on ATH79 && GPIOLIB
 	select SPI_BITBANG
 	help
 	  This enables support for the SPI controller present on the
@@ -163,7 +163,7 @@ config SPI_FALCON
 
 config SPI_GPIO
 	tristate "GPIO-based bitbanging SPI Master"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select SPI_BITBANG
 	help
 	  This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
@@ -240,7 +240,7 @@ config SPI_FSL_ESPI
 
 config SPI_OC_TINY
 	tristate "OpenCores tiny SPI"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select SPI_BITBANG
 	help
 	  This is the driver for OpenCores tiny SPI master controller.
@@ -430,7 +430,7 @@ config SPI_TOPCLIFF_PCH
 
 config SPI_TXX9
 	tristate "Toshiba TXx9 SPI controller"
-	depends on GENERIC_GPIO && CPU_TX49XX
+	depends on GPIOLIB && CPU_TX49XX
 	help
 	  SPI driver for Toshiba TXx9 MIPS SoCs
 
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 465a28c08f2..9feb6ff0650 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -54,7 +54,7 @@ config ANDROID_TIMED_OUTPUT
 
 config ANDROID_TIMED_GPIO
 	tristate "Android timed gpio driver"
-	depends on GENERIC_GPIO && ANDROID_TIMED_OUTPUT
+	depends on GPIOLIB && ANDROID_TIMED_OUTPUT
 	default n
 
 config ANDROID_LOW_MEMORY_KILLER
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
index e2e786dc9c7..ad45dfbdf41 100644
--- a/drivers/staging/iio/accel/Kconfig
+++ b/drivers/staging/iio/accel/Kconfig
@@ -61,7 +61,7 @@ config LIS3L02DQ
 	depends on SPI
 	select IIO_TRIGGER if IIO_BUFFER
 	depends on !IIO_BUFFER || IIO_KFIFO_BUF
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say yes here to build SPI support for the ST microelectronics
 	  accelerometer. The driver supplies direct access via sysfs files
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 7b2a01d64f5..a48eee1b645 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -73,7 +73,7 @@ config AD7780
 config AD7816
 	tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver"
 	depends on SPI
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say yes here to build support for Analog Devices AD7816/7/8
 	  temperature sensors and ADC.
diff --git a/drivers/staging/iio/addac/Kconfig b/drivers/staging/iio/addac/Kconfig
index 698a8970b37..e6795e0bed1 100644
--- a/drivers/staging/iio/addac/Kconfig
+++ b/drivers/staging/iio/addac/Kconfig
@@ -5,7 +5,7 @@ menu "Analog digital bi-direction converters"
 
 config ADT7316
 	tristate "Analog Devices ADT7316/7/8 ADT7516/7/9 temperature sensor, ADC and DAC driver"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say yes here to build support for Analog Devices ADT7316, ADT7317, ADT7318
 	  and ADT7516, ADT7517, ADT7519 temperature sensors, ADC and DAC.
diff --git a/drivers/staging/iio/resolver/Kconfig b/drivers/staging/iio/resolver/Kconfig
index 49f69ef986f..ce360f16321 100644
--- a/drivers/staging/iio/resolver/Kconfig
+++ b/drivers/staging/iio/resolver/Kconfig
@@ -13,7 +13,7 @@ config AD2S90
 config AD2S1200
 	tristate "Analog Devices ad2s1200/ad2s1205 driver"
 	depends on SPI
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say yes here to build support for Analog Devices spi resolver
 	  to digital converters, ad2s1200 and ad2s1205, provides direct access
@@ -22,7 +22,7 @@ config AD2S1200
 config AD2S1210
 	tristate "Analog Devices ad2s1210 driver"
 	depends on SPI
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say yes here to build support for Analog Devices spi resolver
 	  to digital converters, ad2s1210, provides direct access via sysfs.
diff --git a/drivers/staging/iio/trigger/Kconfig b/drivers/staging/iio/trigger/Kconfig
index d44d3ad26fa..1a051da6250 100644
--- a/drivers/staging/iio/trigger/Kconfig
+++ b/drivers/staging/iio/trigger/Kconfig
@@ -14,7 +14,7 @@ config IIO_PERIODIC_RTC_TRIGGER
 
 config IIO_GPIO_TRIGGER
 	tristate "GPIO trigger"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Provides support for using GPIO pins as IIO triggers.
 
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 37962c99ff1..83778683ab4 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -19,7 +19,7 @@ if USB || USB_GADGET
 #
 config USB_GPIO_VBUS
 	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select USB_OTG_UTILS
 	help
 	  Provides simple GPIO VBUS sensing for controllers with an
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f71d5..df9c738d1ff 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2481,7 +2481,7 @@ config FB_SSD1307
 	tristate "Solomon SSD1307 framebuffer support"
 	depends on FB && I2C
 	depends on OF
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	select FB_SYS_FOPS
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index db10d0120d2..b83d1557d42 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -36,14 +36,14 @@ config LCD_CORGI
 
 config LCD_L4F00242T03
 	tristate "Epson L4F00242T03 LCD"
-	depends on SPI_MASTER && GENERIC_GPIO
+	depends on SPI_MASTER && GPIOLIB
 	help
 	  SPI driver for Epson L4F00242T03. This provides basic support
 	  for init and powering the LCD up/down through a sysfs interface.
 
 config LCD_LMS283GF05
 	tristate "Samsung LMS283GF05 LCD"
-	depends on SPI_MASTER && GENERIC_GPIO
+	depends on SPI_MASTER && GPIOLIB
 	help
 	  SPI driver for Samsung LMS283GF05. This provides basic support
 	  for powering the LCD up/down through a sysfs interface.
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index e8ca63a82b9..2bd1257dcc1 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -50,7 +50,7 @@ config W1_MASTER_DS1WM
 
 config W1_MASTER_GPIO
 	tristate "GPIO 1-wire busmaster"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  Say Y here if you want to communicate with your 1-wire devices using
 	  GPIO pins. This driver uses the GPIO API to control the wire.
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index f6c7ae3e223..552e3f46e4a 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -39,7 +39,7 @@ struct gpio {
 	const char	*label;
 };
 
-#ifdef CONFIG_GENERIC_GPIO
+#ifdef CONFIG_GPIOLIB
 
 #ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H
 #include <asm/gpio.h>
@@ -74,7 +74,7 @@ static inline int irq_to_gpio(unsigned int irq)
 
 #endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */
 
-#else /* ! CONFIG_GENERIC_GPIO */
+#else /* ! CONFIG_GPIOLIB */
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -226,7 +226,7 @@ gpiochip_remove_pin_ranges(struct gpio_chip *chip)
 	WARN_ON(1);
 }
 
-#endif /* ! CONFIG_GENERIC_GPIO */
+#endif /* ! CONFIG_GPIOLIB */
 
 struct device;