[ARM] 3865/1: AT91RM9200 header updates

This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 files changed, 173 insertions, 166 deletions

diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c
index 0985b1c42c7..e21cb845d11 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -26,78 +26,78 @@ static struct map_desc at91rm9200_io_desc[] __initdata = {
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_SPI,
-		.pfn		= __phys_to_pfn(AT91_BASE_SPI),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_SPI),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_SSC2,
-		.pfn		= __phys_to_pfn(AT91_BASE_SSC2),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_SSC2),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_SSC1,
-		.pfn		= __phys_to_pfn(AT91_BASE_SSC1),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_SSC1),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_SSC0,
-		.pfn		= __phys_to_pfn(AT91_BASE_SSC0),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_SSC0),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_US3,
-		.pfn		= __phys_to_pfn(AT91_BASE_US3),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_US3),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_US2,
-		.pfn		= __phys_to_pfn(AT91_BASE_US2),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_US2),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_US1,
-		.pfn		= __phys_to_pfn(AT91_BASE_US1),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_US1),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_US0,
-		.pfn		= __phys_to_pfn(AT91_BASE_US0),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_US0),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_EMAC,
-		.pfn		= __phys_to_pfn(AT91_BASE_EMAC),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_TWI,
-		.pfn		= __phys_to_pfn(AT91_BASE_TWI),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_TWI),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_MCI,
-		.pfn		= __phys_to_pfn(AT91_BASE_MCI),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_MCI),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_UDP,
-		.pfn		= __phys_to_pfn(AT91_BASE_UDP),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_UDP),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_TCB1,
-		.pfn		= __phys_to_pfn(AT91_BASE_TCB1),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_TCB1),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_VA_BASE_TCB0,
-		.pfn		= __phys_to_pfn(AT91_BASE_TCB0),
+		.pfn		= __phys_to_pfn(AT91RM9200_BASE_TCB0),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= AT91_SRAM_VIRT_BASE,
-		.pfn		= __phys_to_pfn(AT91_SRAM_BASE),
-		.length		= AT91_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91RM9200_SRAM_BASE),
+		.length		= AT91RM9200_SRAM_SIZE,
 		.type		= MT_DEVICE,
 	},
 };
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c
index edc2cc837ae..5b7892277be 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91rm9200/clock.c
@@ -190,85 +190,85 @@ static void pmc_periph_mode(struct clk *clk, int is_on)
 static struct clk udc_clk = {
 	.name		= "udc_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_UDP,
+	.pmc_mask	= 1 << AT91RM9200_ID_UDP,
 	.mode		= pmc_periph_mode,
 };
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_UHP,
+	.pmc_mask	= 1 << AT91RM9200_ID_UHP,
 	.mode		= pmc_periph_mode,
 };
 static struct clk ether_clk = {
 	.name		= "ether_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_EMAC,
+	.pmc_mask	= 1 << AT91RM9200_ID_EMAC,
 	.mode		= pmc_periph_mode,
 };
 static struct clk mmc_clk = {
 	.name		= "mci_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_MCI,
+	.pmc_mask	= 1 << AT91RM9200_ID_MCI,
 	.mode		= pmc_periph_mode,
 };
 static struct clk twi_clk = {
 	.name		= "twi_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_TWI,
+	.pmc_mask	= 1 << AT91RM9200_ID_TWI,
 	.mode		= pmc_periph_mode,
 };
 static struct clk usart0_clk = {
 	.name		= "usart0_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_US0,
+	.pmc_mask	= 1 << AT91RM9200_ID_US0,
 	.mode		= pmc_periph_mode,
 };
 static struct clk usart1_clk = {
 	.name		= "usart1_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_US1,
+	.pmc_mask	= 1 << AT91RM9200_ID_US1,
 	.mode		= pmc_periph_mode,
 };
 static struct clk usart2_clk = {
 	.name		= "usart2_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_US2,
+	.pmc_mask	= 1 << AT91RM9200_ID_US2,
 	.mode		= pmc_periph_mode,
 };
 static struct clk usart3_clk = {
 	.name		= "usart3_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_US3,
+	.pmc_mask	= 1 << AT91RM9200_ID_US3,
 	.mode		= pmc_periph_mode,
 };
 static struct clk spi_clk = {
 	.name		= "spi0_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_SPI,
+	.pmc_mask	= 1 << AT91RM9200_ID_SPI,
 	.mode		= pmc_periph_mode,
 };
 static struct clk pioA_clk = {
 	.name		= "pioA_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_PIOA,
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOA,
 	.mode		= pmc_periph_mode,
 };
 static struct clk pioB_clk = {
 	.name		= "pioB_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_PIOB,
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOB,
 	.mode		= pmc_periph_mode,
 };
 static struct clk pioC_clk = {
 	.name		= "pioC_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_PIOC,
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOC,
 	.mode		= pmc_periph_mode,
 };
 static struct clk pioD_clk = {
 	.name		= "pioD_clk",
 	.parent		= &mck,
-	.pmc_mask	= 1 << AT91_ID_PIOD,
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
 	.mode		= pmc_periph_mode,
 };
 
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index 4352acb8817..db7c684cdb6 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -35,13 +35,13 @@ static struct at91_usbh_data usbh_data;
 
 static struct resource at91_usbh_resources[] = {
 	[0] = {
-		.start	= AT91_UHP_BASE,
-		.end	= AT91_UHP_BASE + SZ_1M - 1,
+		.start	= AT91RM9200_UHP_BASE,
+		.end	= AT91RM9200_UHP_BASE + SZ_1M - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_UHP,
-		.end	= AT91_ID_UHP,
+		.start	= AT91RM9200_ID_UHP,
+		.end	= AT91RM9200_ID_UHP,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -80,13 +80,13 @@ static struct at91_udc_data udc_data;
 
 static struct resource at91_udc_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_UDP,
-		.end	= AT91_BASE_UDP + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_UDP,
+		.end	= AT91RM9200_BASE_UDP + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_UDP,
-		.end	= AT91_ID_UDP,
+		.start	= AT91RM9200_ID_UDP,
+		.end	= AT91RM9200_ID_UDP,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -131,13 +131,13 @@ static struct at91_eth_data eth_data;
 
 static struct resource at91_eth_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_EMAC,
-		.end	= AT91_BASE_EMAC + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_EMAC,
+		.end	= AT91RM9200_BASE_EMAC + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_EMAC,
-		.end	= AT91_ID_EMAC,
+		.start	= AT91RM9200_ID_EMAC,
+		.end	= AT91RM9200_ID_EMAC,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -263,13 +263,13 @@ static struct at91_mmc_data mmc_data;
 
 static struct resource at91_mmc_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_MCI,
-		.end	= AT91_BASE_MCI + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_MCI,
+		.end	= AT91RM9200_BASE_MCI + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_MCI,
-		.end	= AT91_ID_MCI,
+		.start	= AT91RM9200_ID_MCI,
+		.end	= AT91RM9200_ID_MCI,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -423,13 +423,13 @@ static u64 spi_dmamask = 0xffffffffUL;
 
 static struct resource at91_spi_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_SPI,
-		.end	= AT91_BASE_SPI + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_SPI,
+		.end	= AT91RM9200_BASE_SPI + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_SPI,
-		.end	= AT91_ID_SPI,
+		.start	= AT91RM9200_ID_SPI,
+		.end	= AT91RM9200_ID_SPI,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -582,13 +582,13 @@ static inline void configure_dbgu_pins(void)
 
 static struct resource uart0_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_US0,
-		.end	= AT91_BASE_US0 + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_US0,
+		.end	= AT91RM9200_BASE_US0 + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_US0,
-		.end	= AT91_ID_US0,
+		.start	= AT91RM9200_ID_US0,
+		.end	= AT91RM9200_ID_US0,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -624,13 +624,13 @@ static inline void configure_usart0_pins(void)
 
 static struct resource uart1_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_US1,
-		.end	= AT91_BASE_US1 + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_US1,
+		.end	= AT91RM9200_BASE_US1 + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_US1,
-		.end	= AT91_ID_US1,
+		.start	= AT91RM9200_ID_US1,
+		.end	= AT91RM9200_ID_US1,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -665,13 +665,13 @@ static inline void configure_usart1_pins(void)
 
 static struct resource uart2_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_US2,
-		.end	= AT91_BASE_US2 + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_US2,
+		.end	= AT91RM9200_BASE_US2 + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_US2,
-		.end	= AT91_ID_US2,
+		.start	= AT91RM9200_ID_US2,
+		.end	= AT91RM9200_ID_US2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -700,13 +700,13 @@ static inline void configure_usart2_pins(void)
 
 static struct resource uart3_resources[] = {
 	[0] = {
-		.start	= AT91_BASE_US3,
-		.end	= AT91_BASE_US3 + SZ_16K - 1,
+		.start	= AT91RM9200_BASE_US3,
+		.end	= AT91RM9200_BASE_US3 + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91_ID_US3,
-		.end	= AT91_ID_US3,
+		.start	= AT91RM9200_ID_US3,
+		.end	= AT91RM9200_ID_US3,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index cec199fd672..8476cb8856c 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -261,10 +261,10 @@ void at91_gpio_suspend(void)
 		at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]);
 
 		if (!wakeups[i]) {
-			disable_irq_wake(AT91_ID_PIOA + i);
-			at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i));
+			disable_irq_wake(AT91RM9200_ID_PIOA + i);
+			at91_sys_write(AT91_PMC_PCDR, 1 << (AT91RM9200_ID_PIOA + i));
 		} else {
-			enable_irq_wake(AT91_ID_PIOA + i);
+			enable_irq_wake(AT91RM9200_ID_PIOA + i);
 #ifdef CONFIG_PM_DEBUG
 			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
 #endif
@@ -282,10 +282,10 @@ void at91_gpio_resume(void)
 	}
 
 	at91_sys_write(AT91_PMC_PCER,
-			  (1 << AT91_ID_PIOA)
-			| (1 << AT91_ID_PIOB)
-			| (1 << AT91_ID_PIOC)
-			| (1 << AT91_ID_PIOD));
+			  (1 << AT91RM9200_ID_PIOA)
+			| (1 << AT91RM9200_ID_PIOB)
+			| (1 << AT91RM9200_ID_PIOC)
+			| (1 << AT91RM9200_ID_PIOD));
 }
 
 #else
@@ -384,7 +384,7 @@ void __init at91_gpio_irq_setup(unsigned banks)
 
 	if (banks > 4)
 		banks = 4;
-	for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA;
+	for (pioc = 0, pin = PIN_BASE, id = AT91RM9200_ID_PIOA;
 			pioc < banks;
 			pioc++, id++) {
 		void __iomem	*controller;
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index c3a5e777f9f..8cd60a99c5b 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -61,12 +61,12 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
 	case IRQT_LOW:
-		if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0))	/* only supported on external interrupts */
+		if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0))	/* only supported on external interrupts */
 			return -EINVAL;
 		srctype = AT91_AIC_SRCTYPE_LOW;
 		break;
 	case IRQT_FALLING:
-		if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0))	/* only supported on external interrupts */
+		if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0))	/* only supported on external interrupts */
 			return -EINVAL;
 		srctype = AT91_AIC_SRCTYPE_FALLING;
 		break;
diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c
index 47e5480feb7..32c95d8eaac 100644
--- a/arch/arm/mach-at91rm9200/pm.c
+++ b/arch/arm/mach-at91rm9200/pm.c
@@ -123,13 +123,13 @@ static int at91_pm_enter(suspend_state_t state)
 			(at91_sys_read(AT91_PMC_PCSR)
 					| (1 << AT91_ID_FIQ)
 					| (1 << AT91_ID_SYS)
-					| (1 << AT91_ID_IRQ0)
-					| (1 << AT91_ID_IRQ1)
-					| (1 << AT91_ID_IRQ2)
-					| (1 << AT91_ID_IRQ3)
-					| (1 << AT91_ID_IRQ4)
-					| (1 << AT91_ID_IRQ5)
-					| (1 << AT91_ID_IRQ6))
+					| (1 << AT91RM9200_ID_IRQ0)
+					| (1 << AT91RM9200_ID_IRQ1)
+					| (1 << AT91RM9200_ID_IRQ2)
+					| (1 << AT91RM9200_ID_IRQ3)
+					| (1 << AT91RM9200_ID_IRQ4)
+					| (1 << AT91RM9200_ID_IRQ5)
+					| (1 << AT91RM9200_ID_IRQ6))
 				& at91_sys_read(AT91_AIC_IMR),
 			state);
 
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6b7638b8429..4b3d4d63703 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -850,7 +850,7 @@ static int at91_mci_probe(struct platform_device *pdev)
 	/*
 	 * Allocate the MCI interrupt
 	 */
-	ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
+	ret = request_irq(AT91RM9200_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
 	if (ret) {
 		printk(KERN_ERR "Failed to request MCI interrupt\n");
 		clk_disable(mci_clk);
@@ -906,7 +906,7 @@ static int at91_mci_remove(struct platform_device *pdev)
 
 	mmc_remove_host(mmc);
 	at91_mci_disable();
-	free_irq(AT91_ID_MCI, host);
+	free_irq(AT91RM9200_ID_MCI, host);
 	mmc_free_host(mmc);
 
 	clk_disable(mci_clk);				/* Disable the peripheral clock */
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 95b28aa01f4..3ecf2cc53a7 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -947,7 +947,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
 		return -ENOMEM;
 
 	dev->base_addr = AT91_VA_BASE_EMAC;
-	dev->irq = AT91_ID_EMAC;
+	dev->irq = AT91RM9200_ID_EMAC;
 	SET_MODULE_OWNER(dev);
 
 	/* Install the interrupt handler */
diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c
index 54c6b2adf7b..bf4bf103e5a 100644
--- a/drivers/serial/at91_serial.c
+++ b/drivers/serial/at91_serial.c
@@ -139,7 +139,7 @@ static void at91_set_mctrl(struct uart_port *port, u_int mctrl)
 		 * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
 		 *  We need to drive the pin manually.
 		 */
-		if (port->mapbase == AT91_BASE_US0) {
+		if (port->mapbase == AT91RM9200_BASE_US0) {
 			if (mctrl & TIOCM_RTS)
 				at91_set_gpio_value(AT91_PIN_PA21, 0);
 			else
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index cfebca05ead..043744f1ab7 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1658,7 +1658,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) {
+	if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) {
 		DBG("someone's using UDC memory\n");
 		return -EBUSY;
 	}
@@ -1720,7 +1720,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 fail1:
 	device_unregister(&udc->gadget.dev);
 fail0:
-	release_mem_region(AT91_BASE_UDP, SZ_16K);
+	release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
 	DBG("%s probe failed, %d\n", driver_name, retval);
 	return retval;
 }
@@ -1742,7 +1742,7 @@ static int __devexit at91udc_remove(struct platform_device *pdev)
 		free_irq(udc->board.vbus_pin, udc);
 	free_irq(udc->udp_irq, udc);
 	device_unregister(&udc->gadget.dev);
-	release_mem_region(AT91_BASE_UDP, SZ_16K);
+	release_mem_region(AT91RM9200_BASE_UDP, SZ_16K);
 
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h
index 58f40931a5c..a5a86b1ff88 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h
@@ -19,67 +19,80 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS	1	/* System Peripheral */
-#define AT91_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91_ID_US0	6	/* USART 0 */
-#define AT91_ID_US1	7	/* USART 1 */
-#define AT91_ID_US2	8	/* USART 2 */
-#define AT91_ID_US3	9	/* USART 3 */
-#define AT91_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91_ID_UDP	11	/* USB Device Port */
-#define AT91_ID_TWI	12	/* Two-Wire Interface */
-#define AT91_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91_ID_TC0	17	/* Timer Counter 0 */
-#define AT91_ID_TC1	18	/* Timer Counter 1 */
-#define AT91_ID_TC2	19	/* Timer Counter 2 */
-#define AT91_ID_TC3	20	/* Timer Counter 3 */
-#define AT91_ID_TC4	21	/* Timer Counter 4 */
-#define AT91_ID_TC5	22	/* Timer Counter 5 */
-#define AT91_ID_UHP	23	/* USB Host port */
-#define AT91_ID_EMAC	24	/* Ethernet MAC */
-#define AT91_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
-#define AT91_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
-#define AT91_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
-#define AT91_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
-#define AT91_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91RM9200_ID_US0	6	/* USART 0 */
+#define AT91RM9200_ID_US1	7	/* USART 1 */
+#define AT91RM9200_ID_US2	8	/* USART 2 */
+#define AT91RM9200_ID_US3	9	/* USART 3 */
+#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP	11	/* USB Device Port */
+#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
+#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
+#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
+#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
+#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
+#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
+#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
+#define AT91RM9200_ID_UHP	23	/* USB Host port */
+#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
 
 
 /*
  * Peripheral physical base addresses.
  */
-#define AT91_BASE_TCB0		0xfffa0000
-#define AT91_BASE_TC0		0xfffa0000
-#define AT91_BASE_TC1		0xfffa0040
-#define AT91_BASE_TC2		0xfffa0080
-#define AT91_BASE_TCB1		0xfffa4000
-#define AT91_BASE_TC3		0xfffa4000
-#define AT91_BASE_TC4		0xfffa4040
-#define AT91_BASE_TC5		0xfffa4080
-#define AT91_BASE_UDP		0xfffb0000
-#define AT91_BASE_MCI		0xfffb4000
-#define AT91_BASE_TWI		0xfffb8000
-#define AT91_BASE_EMAC		0xfffbc000
-#define AT91_BASE_US0		0xfffc0000
-#define AT91_BASE_US1		0xfffc4000
-#define AT91_BASE_US2		0xfffc8000
-#define AT91_BASE_US3		0xfffcc000
-#define AT91_BASE_SSC0		0xfffd0000
-#define AT91_BASE_SSC1		0xfffd4000
-#define AT91_BASE_SSC2		0xfffd8000
-#define AT91_BASE_SPI		0xfffe0000
+#define AT91RM9200_BASE_TCB0	0xfffa0000
+#define AT91RM9200_BASE_TC0	0xfffa0000
+#define AT91RM9200_BASE_TC1	0xfffa0040
+#define AT91RM9200_BASE_TC2	0xfffa0080
+#define AT91RM9200_BASE_TCB1	0xfffa4000
+#define AT91RM9200_BASE_TC3	0xfffa4000
+#define AT91RM9200_BASE_TC4	0xfffa4040
+#define AT91RM9200_BASE_TC5	0xfffa4080
+#define AT91RM9200_BASE_UDP	0xfffb0000
+#define AT91RM9200_BASE_MCI	0xfffb4000
+#define AT91RM9200_BASE_TWI	0xfffb8000
+#define AT91RM9200_BASE_EMAC	0xfffbc000
+#define AT91RM9200_BASE_US0	0xfffc0000
+#define AT91RM9200_BASE_US1	0xfffc4000
+#define AT91RM9200_BASE_US2	0xfffc8000
+#define AT91RM9200_BASE_US3	0xfffcc000
+#define AT91RM9200_BASE_SSC0	0xfffd0000
+#define AT91RM9200_BASE_SSC1	0xfffd4000
+#define AT91RM9200_BASE_SSC2	0xfffd8000
+#define AT91RM9200_BASE_SPI	0xfffe0000
 #define AT91_BASE_SYS		0xfffff000
 
 
 /*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
+
+
+#if 0
+/*
  * PIO pin definitions (peripheral A/B multiplexing).
  */
 #define AT91_PA0_MISO		(1 <<  0)	/* A: SPI Master-In Slave-Out */
@@ -257,5 +270,6 @@
 #define AT91_PD25_TPK13		(1 << 25)	/* B: ETM Trace Packet Port 13 */
 #define AT91_PD26_TPK14		(1 << 26)	/* B: ETM Trace Packet Port 14 */
 #define AT91_PD27_TPK15		(1 << 27)	/* B: ETM Trace Packet Port 15 */
+#endif
 
 #endif
diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h
index dbde1baaf25..6243f28a0b8 100644
--- a/include/asm-arm/arch-at91rm9200/gpio.h
+++ b/include/asm-arm/arch-at91rm9200/gpio.h
@@ -20,7 +20,7 @@
 #define PQFP_GPIO_BANKS		3	/* PQFP package has 3 banks */
 #define BGA_GPIO_BANKS		4	/* BGA package has 4 banks */
 
-/* these pin numbers double as IRQ numbers, like AT91_ID_* values */
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
 #define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
 #define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
index 235d39d9110..878e65f369b 100644
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91rm9200/hardware.h
@@ -34,27 +34,23 @@
  * Virtual to Physical Address mapping for IO devices.
  */
 #define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_SPI	AT91_IO_P2V(AT91_BASE_SPI)
-#define AT91_VA_BASE_SSC2	AT91_IO_P2V(AT91_BASE_SSC2)
-#define AT91_VA_BASE_SSC1	AT91_IO_P2V(AT91_BASE_SSC1)
-#define AT91_VA_BASE_SSC0	AT91_IO_P2V(AT91_BASE_SSC0)
-#define AT91_VA_BASE_US3	AT91_IO_P2V(AT91_BASE_US3)
-#define AT91_VA_BASE_US2	AT91_IO_P2V(AT91_BASE_US2)
-#define AT91_VA_BASE_US1	AT91_IO_P2V(AT91_BASE_US1)
-#define AT91_VA_BASE_US0	AT91_IO_P2V(AT91_BASE_US0)
-#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91_BASE_EMAC)
-#define AT91_VA_BASE_TWI	AT91_IO_P2V(AT91_BASE_TWI)
-#define AT91_VA_BASE_MCI	AT91_IO_P2V(AT91_BASE_MCI)
-#define AT91_VA_BASE_UDP	AT91_IO_P2V(AT91_BASE_UDP)
-#define AT91_VA_BASE_TCB1	AT91_IO_P2V(AT91_BASE_TCB1)
-#define AT91_VA_BASE_TCB0	AT91_IO_P2V(AT91_BASE_TCB0)
-
-/* Internal SRAM */
-#define AT91_SRAM_BASE		0x00200000	/* Internal SRAM base address */
-#define AT91_SRAM_SIZE		0x00004000	/* Internal SRAM SIZE (16Kb) */
+#define AT91_VA_BASE_SPI	AT91_IO_P2V(AT91RM9200_BASE_SPI)
+#define AT91_VA_BASE_SSC2	AT91_IO_P2V(AT91RM9200_BASE_SSC2)
+#define AT91_VA_BASE_SSC1	AT91_IO_P2V(AT91RM9200_BASE_SSC1)
+#define AT91_VA_BASE_SSC0	AT91_IO_P2V(AT91RM9200_BASE_SSC0)
+#define AT91_VA_BASE_US3	AT91_IO_P2V(AT91RM9200_BASE_US3)
+#define AT91_VA_BASE_US2	AT91_IO_P2V(AT91RM9200_BASE_US2)
+#define AT91_VA_BASE_US1	AT91_IO_P2V(AT91RM9200_BASE_US1)
+#define AT91_VA_BASE_US0	AT91_IO_P2V(AT91RM9200_BASE_US0)
+#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+#define AT91_VA_BASE_TWI	AT91_IO_P2V(AT91RM9200_BASE_TWI)
+#define AT91_VA_BASE_MCI	AT91_IO_P2V(AT91RM9200_BASE_MCI)
+#define AT91_VA_BASE_UDP	AT91_IO_P2V(AT91RM9200_BASE_UDP)
+#define AT91_VA_BASE_TCB1	AT91_IO_P2V(AT91RM9200_BASE_TCB1)
+#define AT91_VA_BASE_TCB0	AT91_IO_P2V(AT91RM9200_BASE_TCB0)
 
  /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_VIRT_BASE	(AT91_IO_VIRT_BASE - AT91_SRAM_SIZE)
+#define AT91_SRAM_VIRT_BASE	(AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE)
 
 /* Serial ports */
 #define AT91_NR_UART		5		/* 4 USART3's and one DBGU port */
@@ -71,9 +67,6 @@
 /* Compact Flash */
 #define AT91_CF_BASE		0x50000000	/* NCS4-NCS6: Compact Flash physical base address */
 
-/* Multi-Master Memory controller */
-#define AT91_UHP_BASE		0x00300000	/* USB Host controller */
-
 /* Clocks */
 #define AT91_SLOW_CLOCK		32768		/* slow clock */
 
diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h
index f63842c2c09..763cb96c418 100644
--- a/include/asm-arm/arch-at91rm9200/irqs.h
+++ b/include/asm-arm/arch-at91rm9200/irqs.h
@@ -32,7 +32,7 @@
 
 
 /*
- * IRQ interrupt symbols are the AT91_ID_* symbols in at91rm9200.h
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
  * for IRQs handled directly through the AIC, or else the AT91_PIN_*
  * symbols in gpio.h for ones handled indirectly as GPIOs.
  * We make provision for 4 banks of GPIO.