[POWERPC] Assorted janitorial EEH cleanups

Assorted minor cleanups to EEH code; -- use literals, use
kerneldoc format.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c        |   13 ++++++++++---
 arch/powerpc/platforms/pseries/eeh_driver.c |    7 ++++---
 include/asm-powerpc/ppc-pci.h               |   18 +++++++++++++++---
 3 files changed, 29 insertions(+), 9 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>

3 files changed, 29 insertions, 9 deletions

diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 093438b93bd..5f3e6d8659f 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -76,7 +76,7 @@
  */
 #define EEH_MAX_FAILS	2100000
 
-/* Time to wait for a PCI slot to retport status, in milliseconds */
+/* Time to wait for a PCI slot to report status, in milliseconds */
 #define PCI_BUS_RESET_WAIT_MSEC (60*1000)
 
 /* RTAS tokens */
@@ -95,11 +95,18 @@ EXPORT_SYMBOL(eeh_subsystem_enabled);
 /* Lock to avoid races due to multiple reports of an error */
 static DEFINE_SPINLOCK(confirm_error_lock);
 
-/* Buffer for reporting slot-error-detail rtas calls */
+/* Buffer for reporting slot-error-detail rtas calls. Its here
+ * in BSS, and not dynamically alloced, so that it ends up in
+ * RMO where RTAS can access it.
+ */
 static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
 static DEFINE_SPINLOCK(slot_errbuf_lock);
 static int eeh_error_buf_size;
 
+/* Buffer for reporting pci register dumps. Its here in BSS, and
+ * not dynamically alloced, so that it ends up in RMO where RTAS
+ * can access it.
+ */
 #define EEH_PCI_REGS_LOG_LEN 4096
 static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
 
@@ -218,7 +225,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
 void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
 {
 	size_t loglen = 0;
-	memset(pci_regs_buf, 0, EEH_PCI_REGS_LOG_LEN);
+	pci_regs_buf[0] = 0;
 
 	rtas_pci_enable(pdn, EEH_THAW_MMIO);
 	loglen = gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index f07d849cfc8..161a5844ab6 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -378,8 +378,9 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 
 	/* Since rtas may enable MMIO when posting the error log,
 	 * don't post the error log until after all dev drivers
-	 * have been informed. */
-	eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */);
+	 * have been informed.
+	 */
+	eeh_slot_error_detail(frozen_pdn, EEH_LOG_TEMP_FAILURE);
 
 	/* If all device drivers were EEH-unaware, then shut
 	 * down all of the device drivers, and hope they
@@ -470,7 +471,7 @@ hard_fail:
 		location, drv_str, pci_str);
 
 perm_error:
-	eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
+	eeh_slot_error_detail(frozen_pdn, EEH_LOG_PERM_FAILURE);
 
 	/* Notify all devices that they're about to go down. */
 	pci_walk_bus(frozen_bus, eeh_report_failure, NULL);
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
index 6dcd7a811fe..8e2005159ff 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/include/asm-powerpc/ppc-pci.h
@@ -62,11 +62,14 @@ struct pci_dev *pci_get_device_by_addr(unsigned long addr);
 
 /**
  * eeh_slot_error_detail -- record and EEH error condition to the log
- * @severity: 1 if temporary, 2 if permanent failure.
+ * @pdn:      pci device node
+ * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
  *
  * Obtains the EEH error details from the RTAS subsystem,
  * and then logs these details with the RTAS error log system.
  */
+#define EEH_LOG_TEMP_FAILURE 1
+#define EEH_LOG_PERM_FAILURE 2
 void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
 
 /**
@@ -82,6 +85,7 @@ int rtas_pci_enable(struct pci_dn *pdn, int function);
 
 /**
  * rtas_set_slot_reset -- unfreeze a frozen slot
+ * @pdn:       pci device node
  *
  * Clear the EEH-frozen condition on a slot.  This routine
  * does this by asserting the PCI #RST line for 1/8th of
@@ -95,6 +99,7 @@ int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
 
 /** 
  * eeh_restore_bars - Restore device configuration info.
+ * @pdn:       pci device node
  *
  * A reset of a PCI device will clear out its config space.
  * This routines will restore the config space for this
@@ -105,6 +110,7 @@ void eeh_restore_bars(struct pci_dn *);
 
 /**
  * rtas_configure_bridge -- firmware initialization of pci bridge
+ * @pdn:       pci device node
  *
  * Ask the firmware to configure all PCI bridges devices
  * located behind the indicated node. Required after a
@@ -118,16 +124,22 @@ int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
 int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
 
 /**
+ * eeh_mark_slot -- set mode flags for pertition endpoint
+ * @pdn:       pci device node
+ *
  * mark and clear slots: find "partition endpoint" PE and set or 
  * clear the flags for each subnode of the PE.
  */
 void eeh_mark_slot (struct device_node *dn, int mode_flag);
 void eeh_clear_slot (struct device_node *dn, int mode_flag);
 
-/* Find the associated "Partiationable Endpoint" PE */
+/**
+ * find_device_pe -- Find the associated "Partiationable Endpoint" PE
+ * @pdn:       pci device node
+ */
 struct device_node * find_device_pe(struct device_node *dn);
 
-#endif
+#endif /* CONFIG_EEH */
 
 #else /* CONFIG_PCI */
 static inline void find_and_init_phbs(void) { }