V4L/DVB: Update for MT2060 to use dvb_tuner_ops

new tuner api
minor fixes for tuning

Signed-off-by: Olivier DANET <odanet@caramail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

5 files changed, 140 insertions, 163 deletions

diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index a32ff63d170..78a604dfadf 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -168,40 +168,6 @@ int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val)
 }
 EXPORT_SYMBOL(dibusb_read_eeprom_byte);
 
-static struct mt2060_config stk3000p_mt2060_config = {
-	.i2c_address = 0x60,
-};
-
-static int dibusb_tuner_init(struct dvb_frontend *fe)
-{
-	struct dvb_usb_device *d = fe->dvb->priv;
-	struct dibusb_state *st = d->priv;
-
-	if (d->tuner_pass_ctrl && st->mt2060_present) {
-		int ret;
-		d->tuner_pass_ctrl(d->fe, 1, stk3000p_mt2060_config.i2c_address);
-		ret = mt2060_init(&st->mt2060);
-		d->tuner_pass_ctrl(d->fe, 0, 0);
-		return ret;
-	}
-	return dvb_usb_pll_init_i2c(fe);
-}
-
-static int dibusb_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
-{
-	struct dvb_usb_device *d = fe->dvb->priv;
-	struct dibusb_state *st = d->priv;
-
-	if (d->tuner_pass_ctrl && st->mt2060_present) {
-		int ret;
-		d->tuner_pass_ctrl(d->fe, 1, stk3000p_mt2060_config.i2c_address);
-		ret = mt2060_set(&st->mt2060,fep);
-		d->tuner_pass_ctrl(d->fe,0,0);
-		return ret;
-	}
-	return dvb_usb_pll_set_i2c(fe,fep);
-}
-
 static const struct dib3000p_agc_config dib3000p_agc_panasonic_env57h1xd5 = {
 	{ 0x51, 0x301d, 0x0, 0x1cc7, 0xdc29, 0x570a,
 	0xbae1, 0x8ccd, 0x3b6d, 0x551d, 0xa, 0x951e }
@@ -212,64 +178,21 @@ static const struct dib3000p_agc_config dib3000p_agc_microtune_mt2060 = {
 	0xa8f6, 0x5eb8, 0x65ff, 0x40ff,	0x8a, 0x1114 }
 };
 
+static struct mt2060_config stk3000p_mt2060_config = {
+	.i2c_address = 0x60,
+};
+
 int dibusb_dib3000mc_frontend_attach(struct dvb_usb_device *d)
 {
 	struct dib3000_config demod_cfg;
 	struct dibusb_state *st = d->priv;
-
-	demod_cfg.agc      = &dib3000p_agc_panasonic_env57h1xd5;
-	demod_cfg.pll_set  = dibusb_tuner_set;
-	demod_cfg.pll_init = dibusb_tuner_init;
-
-	for (demod_cfg.demod_address = 0x8; demod_cfg.demod_address < 0xd; demod_cfg.demod_address++)
-		if ((d->fe = dib3000mc_attach(&demod_cfg,&d->i2c_adap,&st->ops)) != NULL) {
-			d->tuner_pass_ctrl = st->ops.tuner_pass_ctrl;
-			return 0;
-		}
-
 	return -ENODEV;
 }
 EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach);
 
 int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *d)
 {
-	int ret;
-	u8 a,b;
-	u16 if1 = 1220;
-
-	if (d->tuner_pass_ctrl) {
-		struct dibusb_state *st = d->priv;
-		d->tuner_pass_ctrl(d->fe, 1, stk3000p_mt2060_config.i2c_address);
-		// First IF calibration for Liteon Sticks
-		if (d->udev->descriptor.idVendor == USB_VID_LITEON &&
-		    d->udev->descriptor.idProduct == USB_PID_LITEON_DVB_T_WARM) {
-
-			dibusb_read_eeprom_byte(d,0x7E,&a);
-			dibusb_read_eeprom_byte(d,0x7F,&b);
-
-			if (a == 0xFF && b == 0xFF)
-				if1 = 1220;
-			else if (a == 0x00)
-				if1 = 1220+b;
-			else if (a == 0x80)
-				if1 = 1220-b;
-			else {
-				warn("LITE-ON DVB-T Tuner : Strange IF1 calibration :%2X %2X\n",(int)a,(int)b);
-				if1 = 1220;
-			}
-		}
-		if ((ret = mt2060_attach(&st->mt2060,&stk3000p_mt2060_config, &d->i2c_adap,if1)) != 0) {
-			/* not found - use panasonic pll parameters */
-			d->pll_addr = 0x60;
-			d->pll_desc = &dvb_pll_env57h1xd5;
-		} else {
-			st->mt2060_present = 1;
-			/* set the correct agc parameters for the dib3000p */
-			dib3000mc_set_agc_config(d->fe, &dib3000p_agc_microtune_mt2060);
-		}
-		d->tuner_pass_ctrl(d->fe,0,0);
-	}
-	return 0;
+	return -ENODEV;
 }
 EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h
index 7fd57d053b9..e21de8b668f 100644
--- a/drivers/media/dvb/dvb-usb/dibusb.h
+++ b/drivers/media/dvb/dvb-usb/dibusb.h
@@ -97,7 +97,6 @@
 
 struct dibusb_state {
 	struct dib_fe_xfer_ops ops;
-	struct mt2060_state mt2060;
 	int mt2060_present;
 
 	/* for RC5 remote control */
diff --git a/drivers/media/dvb/frontends/mt2060.c b/drivers/media/dvb/frontends/mt2060.c
index 14b4f588eeb..cc38e7077a0 100644
--- a/drivers/media/dvb/frontends/mt2060.c
+++ b/drivers/media/dvb/frontends/mt2060.c
@@ -19,14 +19,16 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
  */
 
-/* See mt2060_priv.h for details */
-
 /* In that file, frequencies are expressed in kiloHertz to avoid 32 bits overflows */
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/delay.h>
 #include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
 #include "mt2060.h"
 #include "mt2060_priv.h"
 
@@ -34,17 +36,17 @@ static int debug=0;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 
-#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "MT2060: " args); printk("\n"); } } while (0)
+#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2060: " args); printk("\n"); }} while (0)
 
 // Reads a single register
-static int mt2060_readreg(struct mt2060_state *state, u8 reg, u8 *val)
+static int mt2060_readreg(struct mt2060_priv *priv, u8 reg, u8 *val)
 {
 	struct i2c_msg msg[2] = {
-		{ .addr = state->config->i2c_address, .flags = 0,        .buf = &reg, .len = 1 },
-		{ .addr = state->config->i2c_address, .flags = I2C_M_RD, .buf = val,  .len = 1 },
+		{ .addr = priv->cfg->i2c_address, .flags = 0,        .buf = &reg, .len = 1 },
+		{ .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, .buf = val,  .len = 1 },
 	};
 
-	if (i2c_transfer(state->i2c, msg, 2) != 2) {
+	if (i2c_transfer(priv->i2c, msg, 2) != 2) {
 		printk(KERN_WARNING "mt2060 I2C read failed\n");
 		return -EREMOTEIO;
 	}
@@ -52,16 +54,14 @@ static int mt2060_readreg(struct mt2060_state *state, u8 reg, u8 *val)
 }
 
 // Writes a single register
-static int mt2060_writereg(struct mt2060_state *state, u8 reg, u8 val)
+static int mt2060_writereg(struct mt2060_priv *priv, u8 reg, u8 val)
 {
-	u8 buf[2];
+	u8 buf[2] = { reg, val };
 	struct i2c_msg msg = {
-		.addr = state->config->i2c_address, .flags = 0, .buf = buf, .len = 2
+		.addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
 	};
-	buf[0]=reg;
-	buf[1]=val;
 
-	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
 		printk(KERN_WARNING "mt2060 I2C write failed\n");
 		return -EREMOTEIO;
 	}
@@ -69,12 +69,12 @@ static int mt2060_writereg(struct mt2060_state *state, u8 reg, u8 val)
 }
 
 // Writes a set of consecutive registers
-static int mt2060_writeregs(struct mt2060_state *state,u8 *buf, u8 len)
+static int mt2060_writeregs(struct mt2060_priv *priv,u8 *buf, u8 len)
 {
 	struct i2c_msg msg = {
-		.addr = state->config->i2c_address, .flags = 0, .buf = buf, .len = len
+		.addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = len
 	};
-	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
 		printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n",(int)len);
 		return -EREMOTEIO;
 	}
@@ -95,20 +95,6 @@ static u8 mt2060_config2[] = {
 };
 
 //  VGAG=3, V1CSE=1
-static u8 mt2060_config3[] = {
-	REG_VGAG,
-	0x33
-};
-
-int mt2060_init(struct mt2060_state *state)
-{
-	if (mt2060_writeregs(state,mt2060_config1,sizeof(mt2060_config1)))
-		return -EREMOTEIO;
-	if (mt2060_writeregs(state,mt2060_config3,sizeof(mt2060_config3)))
-		return -EREMOTEIO;
-	return 0;
-}
-EXPORT_SYMBOL(mt2060_init);
 
 #ifdef  MT2060_SPURCHECK
 /* The function below calculates the frequency offset between the output frequency if2
@@ -167,8 +153,9 @@ static int mt2060_spurcheck(u32 lo1,u32 lo2,u32 if2)
 #define IF2  36150       // IF2 frequency = 36.150 MHz
 #define FREF 16000       // Quartz oscillator 16 MHz
 
-int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep)
+static int mt2060_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 {
+	struct mt2060_priv *priv;
 	int ret=0;
 	int i=0;
 	u32 freq;
@@ -178,17 +165,23 @@ int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep)
 	u8  b[8];
 	u32 if1;
 
-	if1 = state->if1_freq;
+	priv = fe->tuner_priv;
+
+	if1 = priv->if1_freq;
 	b[0] = REG_LO1B1;
 	b[1] = 0xFF;
-	mt2060_writeregs(state,b,2);
 
-	freq = fep->frequency / 1000; // Hz -> kHz
+	mt2060_writeregs(priv,b,2);
 
-	f_lo1 =  freq + if1 * 1000;
-	f_lo1 = (f_lo1/250)*250;
-	f_lo2 =  f_lo1 - freq - IF2;
-	f_lo2 = (f_lo2/50)*50;
+	freq = params->frequency / 1000; // Hz -> kHz
+	priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0;
+
+	f_lo1 = freq + if1 * 1000;
+	f_lo1 = (f_lo1 / 250) * 250;
+	f_lo2 = f_lo1 - freq - IF2;
+	// From the Comtech datasheet, the step used is 50kHz. The tuner chip could be more precise
+	f_lo2 = ((f_lo2 + 25) / 50) * 50;
+	priv->frequency =  (f_lo1 - f_lo2 - IF2) * 1000,
 
 #ifdef MT2060_SPURCHECK
 	// LO-related spurs detection and correction
@@ -197,12 +190,14 @@ int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep)
 	f_lo2 += num1;
 #endif
 	//Frequency LO1 = 16MHz * (DIV1 + NUM1/64 )
-	div1 = f_lo1 / FREF;
-	num1 = (64 * (f_lo1 % FREF)  )/FREF;
+	num1 = f_lo1 / (FREF / 64);
+	div1 = num1 / 64;
+	num1 &= 0x3f;
 
 	// Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 )
-	div2 = f_lo2 / FREF;
-	num2 = (16384 * (f_lo2 % FREF) /FREF +1)/2;
+	num2 = f_lo2 * 64 / (FREF / 128);
+	div2 = num2 / 8192;
+	num2 &= 0x1fff;
 
 	if (freq <=  95000) lnaband = 0xB0; else
 	if (freq <= 180000) lnaband = 0xA0; else
@@ -223,85 +218,144 @@ int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep)
 	b[5] = ((num2 >>12) & 1) | (div2 << 1);
 
 	dprintk("IF1: %dMHz",(int)if1);
-	dprintk("PLL freq: %d  f_lo1: %d  f_lo2: %d  (kHz)",(int)freq,(int)f_lo1,(int)f_lo2);
-	dprintk("PLL div1: %d  num1: %d  div2: %d  num2: %d",(int)div1,(int)num1,(int)div2,(int)num2);
+	dprintk("PLL freq=%dkHz  f_lo1=%dkHz  f_lo2=%dkHz",(int)freq,(int)f_lo1,(int)f_lo2);
+	dprintk("PLL div1=%d  num1=%d  div2=%d  num2=%d",(int)div1,(int)num1,(int)div2,(int)num2);
 	dprintk("PLL [1..5]: %2x %2x %2x %2x %2x",(int)b[1],(int)b[2],(int)b[3],(int)b[4],(int)b[5]);
 
-	mt2060_writeregs(state,b,6);
+	mt2060_writeregs(priv,b,6);
 
 	//Waits for pll lock or timeout
-	i=0;
+	i = 0;
 	do {
-		mt2060_readreg(state,REG_LO_STATUS,b);
-		if ((b[0] & 0x88)==0x88) break;
+		mt2060_readreg(priv,REG_LO_STATUS,b);
+		if ((b[0] & 0x88)==0x88)
+			break;
 		msleep(4);
 		i++;
 	} while (i<10);
 
 	return ret;
 }
-EXPORT_SYMBOL(mt2060_set);
 
-/* from usbsnoop.log */
-static void mt2060_calibrate(struct mt2060_state *state)
+static void mt2060_calibrate(struct mt2060_priv *priv)
 {
 	u8 b = 0;
 	int i = 0;
 
-	if (mt2060_writeregs(state,mt2060_config1,sizeof(mt2060_config1)))
+	if (mt2060_writeregs(priv,mt2060_config1,sizeof(mt2060_config1)))
 		return;
-	if (mt2060_writeregs(state,mt2060_config2,sizeof(mt2060_config2)))
+	if (mt2060_writeregs(priv,mt2060_config2,sizeof(mt2060_config2)))
 		return;
 
 	do {
 		b |= (1 << 6); // FM1SS;
-		mt2060_writereg(state, REG_LO2C1,b);
+		mt2060_writereg(priv, REG_LO2C1,b);
 		msleep(20);
 
 		if (i == 0) {
 			b |= (1 << 7); // FM1CA;
-			mt2060_writereg(state, REG_LO2C1,b);
+			mt2060_writereg(priv, REG_LO2C1,b);
 			b &= ~(1 << 7); // FM1CA;
 			msleep(20);
 		}
 
 		b &= ~(1 << 6); // FM1SS
-		mt2060_writereg(state, REG_LO2C1,b);
+		mt2060_writereg(priv, REG_LO2C1,b);
 
 		msleep(20);
 		i++;
 	} while (i < 9);
 
 	i = 0;
-	while (i++ < 10 && mt2060_readreg(state, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0)
+	while (i++ < 10 && mt2060_readreg(priv, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0)
 		msleep(20);
 
 	if (i < 10) {
-		mt2060_readreg(state, REG_FM_FREQ, &state->fmfreq); // now find out, what is fmreq used for :)
-		dprintk("calibration was successful: %d", state->fmfreq);
+		mt2060_readreg(priv, REG_FM_FREQ, &priv->fmfreq); // now find out, what is fmreq used for :)
+		dprintk("calibration was successful: %d", (int)priv->fmfreq);
 	} else
 		dprintk("FMCAL timed out");
 }
 
+static int mt2060_calc_regs(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8 *buf, int buf_len)
+{
+	return -ENODEV;
+}
+
+static int mt2060_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct mt2060_priv *priv = fe->tuner_priv;
+	*frequency = priv->frequency;
+	return 0;
+}
+
+static int mt2060_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	struct mt2060_priv *priv = fe->tuner_priv;
+	*bandwidth = priv->bandwidth;
+	return 0;
+}
+
+static int mt2060_sleep(struct dvb_frontend *fe)
+{
+	struct mt2060_priv *priv = fe->tuner_priv;
+	return mt2060_writereg(priv, REG_VGAG,0x30);
+}
+
+static int mt2060_release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+	return 0;
+}
+
+static const struct dvb_tuner_ops mt2060_tuner_ops = {
+	.info = {
+		.name           = "Microtune MT2060",
+		.frequency_min  =  48000000,
+		.frequency_max  = 860000000,
+		.frequency_step =     50000,
+	},
+
+	.release       = mt2060_release,
+
+	.sleep         = mt2060_sleep,
+
+	.set_params    = mt2060_set_params,
+	.calc_regs     = mt2060_calc_regs,
+	.get_frequency = mt2060_get_frequency,
+	.get_bandwidth = mt2060_get_bandwidth
+};
+
 /* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */
-int mt2060_attach(struct mt2060_state *state, struct mt2060_config *config, struct i2c_adapter *i2c,u16 if1)
+int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
 {
+	struct mt2060_priv *priv = NULL;
 	u8 id = 0;
-	memset(state,0,sizeof(struct mt2060_state));
 
-	state->config = config;
-	state->i2c = i2c;
-	state->if1_freq = if1;
+	priv = kzalloc(sizeof(struct mt2060_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
 
-	if (mt2060_readreg(state,REG_PART_REV,&id) != 0)
-		return -ENODEV;
+	priv->cfg      = cfg;
+	priv->i2c      = i2c;
+	priv->if1_freq = if1;
 
-	if (id != PART_REV)
+	if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) {
+		kfree(priv);
 		return -ENODEV;
+	}
 
+	if (id != PART_REV) {
+		kfree(priv);
+		return -ENODEV;
+	}
 	printk(KERN_INFO "MT2060: successfully identified\n");
+	memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops));
+
+	fe->tuner_priv = priv;
 
-	mt2060_calibrate(state);
+	mt2060_calibrate(priv);
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/mt2060.h b/drivers/media/dvb/frontends/mt2060.h
index d5dae102f96..c58b03e8234 100644
--- a/drivers/media/dvb/frontends/mt2060.h
+++ b/drivers/media/dvb/frontends/mt2060.h
@@ -22,23 +22,14 @@
 #ifndef MT2060_H
 #define MT2060_H
 
-#include <linux/i2c.h>
-#include <linux/dvb/frontend.h>
+struct dvb_frontend;
+struct i2c_adapter;
 
 struct mt2060_config {
 	u8 i2c_address;
 	/* Shall we add settings for the discrete outputs ? */
 };
 
-struct mt2060_state {
-	struct mt2060_config *config;
-	struct i2c_adapter *i2c;
-	u16 if1_freq;
-	u8 fmfreq;
-};
-
-extern int mt2060_init(struct mt2060_state *state);
-extern int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep);
-extern int mt2060_attach(struct mt2060_state *state, struct mt2060_config *config, struct i2c_adapter *i2c,u16 if1);
+extern int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
 
 #endif
diff --git a/drivers/media/dvb/frontends/mt2060_priv.h b/drivers/media/dvb/frontends/mt2060_priv.h
index 47e691e44b7..5eaccdefd0b 100644
--- a/drivers/media/dvb/frontends/mt2060_priv.h
+++ b/drivers/media/dvb/frontends/mt2060_priv.h
@@ -92,4 +92,14 @@
 
 #define PART_REV 0x63 // The current driver works only with PART=6 and REV=3 chips
 
+struct mt2060_priv {
+	struct mt2060_config *cfg;
+	struct i2c_adapter   *i2c;
+
+	u32 frequency;
+	u32 bandwidth;
+	u16 if1_freq;
+	u8  fmfreq;
+};
+
 #endif