Merge tag 'mfd-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull mfd fixes from Lee Jones:
 "Couple of simple fixes due for the 3.17 rcs

  (and a sneaky document addition that slipped from the previous
  pull-request)"

* tag 'mfd-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators
  mfd: tc3589x: Add device tree bindings
  mfd: ab8500-core: Use 'ifdef' for config options
  mfd: htc-i2cpld: Fix %d confusingly prefixed with 0x in format string
  mfd: omap-usb-host: Fix %d confusingly prefixed with 0x in format string

6 files changed, 121 insertions, 14 deletions

diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
new file mode 100644
index 00000000000..6fcedba46ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+   "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupt-parent : specifies which IRQ controller we're connected to
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+   TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+  This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+  (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+   TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+   in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+   flags are valid:
+   - IRQ_TYPE_LEVEL_LOW
+   - IRQ_TYPE_LEVEL_HIGH
+   - IRQ_TYPE_EDGE_RISING
+   - IRQ_TYPE_EDGE_FALLING
+   - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+   GPIO controller, the second cell is the flags.
+
+- Keypad
+  This keypad is the same on all variants, supporting up to 96 different
+  keys. The linux-specific properties are modeled on those already existing
+  in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+   bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - linux,wakeup: use any event on keypad as wakeup event.
+
+Example:
+
+tc35893@44 {
+	compatible = "toshiba,tc35893";
+	reg = <0x44>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	tc3589x_gpio {
+		compatible = "toshiba,tc3589x-gpio";
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	tc3589x_keypad {
+		compatible = "toshiba,tc3589x-keypad";
+		interrupts = <6>;
+		debounce-delay-ms = <4>;
+		keypad,num-columns = <8>;
+		keypad,num-rows = <8>;
+		linux,no-autorepeat;
+		linux,wakeup;
+		linux,keymap = <0x0301006b
+				0x04010066
+				0x06040072
+				0x040200d7
+				0x0303006a
+				0x0205000e
+				0x0607008b
+				0x0500001c
+				0x0403000b
+				0x03040034
+				0x05020067
+				0x0305006c
+				0x040500e7
+				0x0005009e
+				0x06020073
+				0x01030039
+				0x07060069
+				0x050500d9>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b15f1a77d68..1fe45d1f75e 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -353,7 +353,7 @@
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900";
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 		ti,use_poweroff;
 	};
 };
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index ce48aa72bb4..bde2fc07241 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1754,7 +1754,7 @@ static int ab8500_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-#if CONFIG_DEBUG_FS
+#ifdef CONFIG_DEBUG_FS
 	/* Pass to debugfs */
 	ab8500_debug_resources[0].start = ab8500->irq;
 	ab8500_debug_resources[0].end = ab8500->irq;
diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c
index b44f0203983..6bdb78c2ac7 100644
--- a/drivers/mfd/htc-i2cpld.c
+++ b/drivers/mfd/htc-i2cpld.c
@@ -404,7 +404,7 @@ static int htcpld_register_chip_i2c(
 	}
 
 	i2c_set_clientdata(client, chip);
-	snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%d", client->addr);
+	snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%x", client->addr);
 	chip->client = client;
 
 	/* Reset the chip */
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 33a9234b701..83dab2f0a50 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -647,7 +647,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 		default:
 			omap->nports = OMAP3_HS_USB_PORTS;
 			dev_dbg(dev,
-			 "USB HOST Rev:0x%d not recognized, assuming %d ports\n",
+			 "USB HOST Rev:0x%x not recognized, assuming %d ports\n",
 			 omap->usbhs_rev, omap->nports);
 			break;
 		}
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 3bc969a5916..4d3ff377149 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -724,24 +724,24 @@ static struct twl4030_script *omap3_idle_scripts[] = {
  * above.
  */
 static struct twl4030_resconfig omap3_idle_rconfig[] = {
-	TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0),
-	TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0),
-	TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0),
-	TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0),
-	TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0),
-	TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX1, TWL4030_RESCONFIG_UNDEF, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX2, TWL4030_RESCONFIG_UNDEF, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX3, TWL4030_RESCONFIG_UNDEF, 0, 0),
+	TWL_REMAP_SLEEP(RES_VAUX4, TWL4030_RESCONFIG_UNDEF, 0, 0),
+	TWL_REMAP_SLEEP(RES_VMMC1, TWL4030_RESCONFIG_UNDEF, 0, 0),
+	TWL_REMAP_SLEEP(RES_VMMC2, TWL4030_RESCONFIG_UNDEF, 0, 0),
 	TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1),
 	TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0),
-	TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0),
-	TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VSIM, TWL4030_RESCONFIG_UNDEF, 0, 0),
+	TWL_REMAP_SLEEP(RES_VDAC, TWL4030_RESCONFIG_UNDEF, 0, 0),
 	TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2),
 	TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2),
 	TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2),
 	TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2),
 	TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1),
 	TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1),
-	TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0),
-	TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0),
+	TWL_REMAP_SLEEP(RES_VUSB_1V5, TWL4030_RESCONFIG_UNDEF, 0, 0),
+	TWL_REMAP_SLEEP(RES_VUSB_1V8, TWL4030_RESCONFIG_UNDEF, 0, 0),
 	TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0),
 	/* Resource #20 USB charge pump skipped */
 	TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1),