summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDave Martin <dave.martin@linaro.org>2011-03-04 15:33:55 +0000
committerKevin Hilman <khilman@ti.com>2011-03-09 16:38:36 -0800
commit76d500182061dcc7508e6b829af097348fa7d804 (patch)
tree3948584135d93937f668481acbcfab795efedbb5
parentf96bdfa0d036393741fce303ea98abb44452d042 (diff)
ARM: omap3: Remove hand-encoded SMC instructions
For various reasons, Linux now only officially supports being built with tools which are new enough to understand the SMC instruction. Replacing the hand-encoded instructions when the mnemonic also allows for correct assembly in Thumb-2 (otherwise, the result is random data in the middle of the code). The Makefile already ensures that this file is built with a high enough gcc -march= flag (armv7-a). Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
-rw-r--r--arch/arm/mach-omap2/sleep34xx.S14
1 files changed, 7 insertions, 7 deletions
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 98d8232808b..a05c348885a 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -133,7 +133,7 @@ ENTRY(save_secure_ram_context)
mov r6, #0xff
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
- .word 0xE1600071 @ call SMI monitor (smi #1)
+ smc #1 @ call SMI monitor (smi #1)
nop
nop
nop
@@ -408,7 +408,7 @@ skipl2dis:
adr r3, l2_inv_api_params @ r3 points to dummy parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
- .word 0xE1600071 @ call SMI monitor (smi #1)
+ smc #1 @ call SMI monitor (smi #1)
/* Write to Aux control register to set some bits */
mov r0, #42 @ set service ID for PPA
mov r12, r0 @ copy secure Service ID in r12
@@ -419,7 +419,7 @@ skipl2dis:
ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
- .word 0xE1600071 @ call SMI monitor (smi #1)
+ smc #1 @ call SMI monitor (smi #1)
#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
/* Restore L2 aux control register */
@@ -434,7 +434,7 @@ skipl2dis:
adds r3, r3, #8 @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
- .word 0xE1600071 @ call SMI monitor (smi #1)
+ smc #1 @ call SMI monitor (smi #1)
#endif
b logic_l1_restore
@@ -443,18 +443,18 @@ l2_inv_api_params:
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalidate L2
- .word 0xE1600070 @ Call SMI monitor (smieq)
+ smc #0 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#4]
mov r12, #0x3
- .word 0xE1600070 @ Call SMI monitor (smieq)
+ smc #0 @ Call SMI monitor (smieq)
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#12]
mov r12, #0x2
- .word 0xE1600070 @ Call SMI monitor (smieq)
+ smc #0 @ Call SMI monitor (smieq)
logic_l1_restore:
ldr r1, l2dis_3630
cmp r1, #0x1 @ Test if L2 re-enable needed on 3630