summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorNishanth Menon <nm@ti.com>2011-01-07 09:41:13 -0600
committerKevin Hilman <khilman@ti.com>2011-03-09 16:15:49 -0800
commit8743410d4971c5510a7d09293f5f3f89d8081059 (patch)
tree3b6fcf20fdf7f9a60118bf8e1167bc8cbd53e906
parenteb05ead90ddb2a4e51d34f6c25f01c2e0653da59 (diff)
OMAP3: beagle xm: enable up to 800MHz OPP
OMP3630 silicon can enable higher frequencies only depending on the board characteristics meeting the recommended standards, and has to be selectively toggled. Beagle XM uses 3730 variant and the board design allows enabling 800MHz and 1GHz OPPs. However, We need Smart reflex class 1.5 and ABB to enable 1GHz safely. For the moment, we tweak the default table to allow for 800Mhz OPP usage. Reported-by: Koen Kooi <koen@beagleboard.org> Tested-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c50
1 files changed, 50 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 46d814ab565..91b4e1438ae 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -23,6 +23,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/opp.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -45,10 +46,12 @@
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
+#include <plat/omap_device.h>
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
+#include "pm.h"
#define NAND_BLOCK_SIZE SZ_128K
@@ -610,6 +613,52 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
+static void __init beagle_opp_init(void)
+{
+ int r = 0;
+
+ /* Initialize the omap3 opp table */
+ if (omap3_opp_init()) {
+ pr_err("%s: opp default init failed\n", __func__);
+ return;
+ }
+
+ /* Custom OPP enabled for XM */
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
+ struct omap_hwmod *dh = omap_hwmod_lookup("iva");
+ struct device *dev;
+
+ if (!mh || !dh) {
+ pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
+ __func__, mh, dh);
+ return;
+ }
+ /* Enable MPU 1GHz and lower opps */
+ dev = &mh->od->pdev.dev;
+ r = opp_enable(dev, 800000000);
+ /* TODO: MPU 1GHz needs SR and ABB */
+
+ /* Enable IVA 800MHz and lower opps */
+ dev = &dh->od->pdev.dev;
+ r |= opp_enable(dev, 660000000);
+ /* TODO: DSP 800MHz needs SR and ABB */
+ if (r) {
+ pr_err("%s: failed to enable higher opp %d\n",
+ __func__, r);
+ /*
+ * Cleanup - disable the higher freqs - we dont care
+ * about the results
+ */
+ dev = &mh->od->pdev.dev;
+ opp_disable(dev, 800000000);
+ dev = &dh->od->pdev.dev;
+ opp_disable(dev, 660000000);
+ }
+ }
+ return;
+}
+
static void __init omap3_beagle_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -633,6 +682,7 @@ static void __init omap3_beagle_init(void)
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
beagle_display_init();
+ beagle_opp_init();
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")