Merge tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
author: Linus Torvalds <torvalds@linux-foundation.org> 2013-07-03 11:48:03 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2013-07-03 11:48:03 -0700
commit: 3dbde57ad941c55345fd7fac0ee3f70f204b02d8 (patch)
tree: 237c6de64d05da3f61b9ac1724e37a5c1f014b71
parent: a6e6d863cf68bba886acfe47dbdc8f245cce588f (diff)
parent: 2207a4e1ca6a1bb126360b6d0c236af6664532f2 (diff)
60 files changed, 12447 insertions, 2945 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
new file mode 100644
index 00000000000..ddcdeb697c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
@@ -0,0 +1,41 @@
+Freescale Vybrid VF610 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,vf610-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is
+  a pin working on a specific function, CONFIG is the pad setting value
+  such as pull-up, speed, ode for this pin. Please refer to Vybrid VF610
+  datasheet for the valid pad config settings.
+
+CONFIG bits definition:
+PAD_CTL_SPEED_LOW		(1 << 12)
+PAD_CTL_SPEED_MED		(2 << 12)
+PAD_CTL_SPEED_HIGH		(3 << 12)
+PAD_CTL_SRE_FAST		(1 << 11)
+PAD_CTL_SRE_SLOW		(0 << 11)
+PAD_CTL_ODE			(1 << 10)
+PAD_CTL_HYS			(1 << 9)
+PAD_CTL_DSE_DISABLE		(0 << 6)
+PAD_CTL_DSE_150ohm		(1 << 6)
+PAD_CTL_DSE_75ohm		(2 << 6)
+PAD_CTL_DSE_50ohm		(3 << 6)
+PAD_CTL_DSE_37ohm		(4 << 6)
+PAD_CTL_DSE_30ohm		(5 << 6)
+PAD_CTL_DSE_25ohm		(6 << 6)
+PAD_CTL_DSE_20ohm		(7 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_PKE			(1 << 3)
+PAD_CTL_PUE			(1 << 2)
+PAD_CTL_OBE_ENABLE		(1 << 1)
+PAD_CTL_IBE_ENABLE		(1 << 0)
+PAD_CTL_OBE_IBE_ENABLE		(3 << 0)
+
+Please refer to vf610-pinfunc.h in device tree source folder
+for all available PIN_FUNC_ID for Vybrid VF610.
diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
new file mode 100644
index 00000000000..a186181c402
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
@@ -0,0 +1,127 @@
+ImgTec TZ1090 PDC pin controller
+
+Required properties:
+- compatible: "img,tz1090-pdc-pinctrl"
+- reg: Should contain the register physical address and length of the
+  SOC_GPIO_CONTROL registers in the PDC register region.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+TZ1090-PDC's pin configuration nodes act as a container for an abitrary number
+of subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function. For this reason, even seemingly boolean
+values are actually tristates in this binding: unspecified, off, or on.
+Unspecified is represented as an absent property, and off/on are represented as
+integer values 0 and 1.
+
+Required subnode-properties:
+- tz1090,pins : An array of strings. Each string contains the name of a pin or
+  group. Valid values for these names are listed below.
+
+Optional subnode-properties:
+- tz1090,function: A string containing the name of the function to mux to the
+  pin or group. Valid values for function names are listed below, including
+  which pingroups can be muxed to them.
+- supported generic pinconfig properties (for further details see
+  Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt):
+  - bias-disable
+  - bias-high-impedance
+  - bias-bus-hold
+  - bias-pull-up
+  - bias-pull-down
+  - input-schmitt-enable
+  - input-schmitt-disable
+  - drive-strength: Integer, control drive strength of pins in mA.
+      2: 2mA
+      4: 4mA
+      8: 8mA
+      12: 12mA
+  - low-power-enable: Flag, power-on-start weak pull-down for invalid power.
+  - low-power-disable: Flag, power-on-start weak pull-down disabled.
+
+Note that many of these properties are only valid for certain specific pins
+or groups. See the TZ1090 TRM for complete details regarding which groups
+support which functionality. The Linux pinctrl driver may also be a useful
+reference.
+
+Valid values for pin and group names are:
+
+  pins:
+
+    These all support bias-high-impediance, bias-pull-up, bias-pull-down, and
+    bias-bus-hold (which can also be provided to any of the groups below to set
+    it for all gpio pins in that group).
+
+    gpio0, gpio1, sys_wake0, sys_wake1, sys_wake2, ir_data, ext_power.
+
+  mux groups:
+
+    These all support function.
+
+    gpio0
+        pins:       gpio0.
+        function:   ir_mod_stable_out.
+    gpio1
+        pins:       gpio1.
+        function:   ir_mod_power_out.
+
+  drive groups:
+
+    These support input-schmitt-enable, input-schmitt-disable,
+    drive-strength, low-power-enable, and low-power-disable.
+
+    pdc
+        pins:   gpio0, gpio1, sys_wake0, sys_wake1, sys_wake2, ir_data,
+                ext_power.
+
+Example:
+
+	pinctrl_pdc: pinctrl@02006500 {
+		#gpio-range-cells = <3>;
+		compatible = "img,tz1090-pdc-pinctrl";
+		reg = <0x02006500 0x100>;
+	};
+
+Example board file extracts:
+
+	&pinctrl_pdc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&syswake_default>;
+
+		syswake_default: syswakes {
+			syswake_cfg {
+				tz1090,pins =	"sys_wake0",
+						"sys_wake1",
+						"sys_wake2";
+				pull-up;
+			};
+		};
+		irmod_default: irmod {
+			gpio0_cfg {
+				tz1090,pins =	"gpio0";
+				tz1090,function = "ir_mod_stable_out";
+			};
+			gpio1_cfg {
+				tz1090,pins =	"gpio1";
+				tz1090,function = "ir_mod_power_out";
+			};
+		};
+	};
+
+	ir: ir@02006200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&irmod_default>;
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
new file mode 100644
index 00000000000..4b27c99f7f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
@@ -0,0 +1,227 @@
+ImgTec TZ1090 pin controller
+
+Required properties:
+- compatible: "img,tz1090-pinctrl"
+- reg: Should contain the register physical address and length of the pad
+  configuration registers (CR_PADS_* and CR_IF_CTL0).
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+TZ1090's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function. For this reason, even seemingly boolean
+values are actually tristates in this binding: unspecified, off, or on.
+Unspecified is represented as an absent property, and off/on are represented as
+integer values 0 and 1.
+
+Required subnode-properties:
+- tz1090,pins : An array of strings. Each string contains the name of a pin or
+  group. Valid values for these names are listed below.
+
+Optional subnode-properties:
+- tz1090,function: A string containing the name of the function to mux to the
+  pin or group. Valid values for function names are listed below, including
+  which pingroups can be muxed to them.
+- supported generic pinconfig properties (for further details see
+  Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt):
+  - bias-disable
+  - bias-high-impedance
+  - bias-bus-hold
+  - bias-pull-up
+  - bias-pull-down
+  - input-schmitt-enable
+  - input-schmitt-disable
+  - drive-strength: Integer, control drive strength of pins in mA.
+      2: 2mA
+      4: 4mA
+      8: 8mA
+      12: 12mA
+
+
+Note that many of these properties are only valid for certain specific pins
+or groups. See the TZ1090 TRM for complete details regarding which groups
+support which functionality. The Linux pinctrl driver may also be a useful
+reference.
+
+Valid values for pin and group names are:
+
+  gpio pins:
+
+    These all support bias-high-impediance, bias-pull-up, bias-pull-down, and
+    bias-bus-hold (which can also be provided to any of the groups below to set
+    it for all pins in that group).
+
+    They also all support the some form of muxing. Any pins which are contained
+    in one of the mux groups (see below) can be muxed only to the functions
+    supported by the mux group. All other pins can be muxed to the "perip"
+    function which which enables them with their intended peripheral.
+
+    Different pins in the same mux group cannot be muxed to different functions,
+    however it is possible to mux only a subset of the pins in a mux group to a
+    particular function and leave the remaining pins unmuxed. This is useful if
+    the board connects certain pins in a group to other devices to be controlled
+    by GPIO, and you don't want the usual peripheral to have any control of the
+    pin.
+
+    ant_sel0, ant_sel1, gain0, gain1, gain2, gain3, gain4, gain5, gain6, gain7,
+    i2s_bclk_out, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2, i2s_lrclk_out,
+    i2s_mclk, pa_on, pdm_a, pdm_b, pdm_c, pdm_d, pll_on, rx_hp, rx_on,
+    scb0_sclk, scb0_sdat, scb1_sclk, scb1_sdat, scb2_sclk, scb2_sdat, sdh_cd,
+    sdh_clk_in, sdh_wp, sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, sdio_d3,
+    spi0_cs0, spi0_cs1, spi0_cs2, spi0_din, spi0_dout, spi0_mclk, spi1_cs0,
+    spi1_cs1, spi1_cs2, spi1_din, spi1_dout, spi1_mclk, tft_blank_ls, tft_blue0,
+    tft_blue1, tft_blue2, tft_blue3, tft_blue4, tft_blue5, tft_blue6, tft_blue7,
+    tft_green0, tft_green1, tft_green2, tft_green3, tft_green4, tft_green5,
+    tft_green6, tft_green7, tft_hsync_nr, tft_panelclk, tft_pwrsave, tft_red0,
+    tft_red1, tft_red2, tft_red3, tft_red4, tft_red5, tft_red6, tft_red7,
+    tft_vd12acb, tft_vdden_gd, tft_vsync_ns, tx_on, uart0_cts, uart0_rts,
+    uart0_rxd, uart0_txd, uart1_rxd, uart1_txd.
+
+        bias-high-impediance:  supported.
+        bias-pull-up:          supported.
+        bias-pull-down:        supported.
+        bias-bus-hold:         supported.
+        function:              perip or those supported by pin's mux group.
+
+  other pins:
+
+    These other pins are part of various pin groups below, but can't be
+    controlled as GPIOs. They do however support bias-high-impediance,
+    bias-pull-up, bias-pull-down, and bias-bus-hold (which can also be provided
+    to any of the groups below to set it for all pins in that group).
+
+    clk_out0, clk_out1, tck, tdi, tdo, tms, trst.
+
+        bias-high-impediance:  supported.
+        bias-pull-up:          supported.
+        bias-pull-down:        supported.
+        bias-bus-hold:         supported.
+
+  mux groups:
+
+    These all support function, and some support drive configs.
+
+    afe
+        pins:                  tx_on, rx_on, pll_on, pa_on, rx_hp, ant_sel0,
+                               ant_sel1, gain0, gain1, gain2, gain3, gain4,
+                               gain5, gain6, gain7.
+        function:              afe, ts_out_0.
+        input-schmitt-enable:  supported.
+        input-schmitt-disable: supported.
+        drive-strength:        supported.
+    pdm_d
+        pins:                  pdm_d.
+        function:              pdm_dac, usb_vbus.
+    sdh
+        pins:                  sdh_cd, sdh_wp, sdh_clk_in.
+        function:              sdh, sdio.
+    sdio
+        pins:                  sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2,
+                               sdio_d3.
+        function:              sdio, sdh.
+    spi1_cs2
+        pins:                  spi1_cs2.
+        function:              spi1_cs2, usb_vbus.
+    tft
+        pins:                  tft_red0, tft_red1, tft_red2, tft_red3,
+                               tft_red4, tft_red5, tft_red6, tft_red7,
+                               tft_green0, tft_green1, tft_green2, tft_green3,
+                               tft_green4, tft_green5, tft_green6, tft_green7,
+                               tft_blue0, tft_blue1, tft_blue2, tft_blue3,
+                               tft_blue4, tft_blue5, tft_blue6, tft_blue7,
+                               tft_vdden_gd, tft_panelclk, tft_blank_ls,
+                               tft_vsync_ns, tft_hsync_nr, tft_vd12acb,
+                               tft_pwrsave.
+        function:              tft, ext_dac, not_iqadc_stb, iqdac_stb, ts_out_1,
+                               lcd_trace, phy_ringosc.
+        input-schmitt-enable:  supported.
+        input-schmitt-disable: supported.
+        drive-strength:        supported.
+
+  drive groups:
+
+    These all support input-schmitt-enable, input-schmitt-disable,
+    and drive-strength.
+
+    jtag
+        pins:   tck, trst, tdi, tdo, tms.
+    scb1
+        pins:   scb1_sdat, scb1_sclk.
+    scb2
+        pins:   scb2_sdat, scb2_sclk.
+    spi0
+        pins:   spi0_mclk, spi0_cs0, spi0_cs1, spi0_cs2, spi0_dout, spi0_din.
+    spi1
+        pins:   spi1_mclk, spi1_cs0, spi1_cs1, spi1_cs2, spi1_dout, spi1_din.
+    uart
+        pins:   uart0_txd, uart0_rxd, uart0_rts, uart0_cts,
+                uart1_txd, uart1_rxd.
+    drive_i2s
+        pins:   clk_out1, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2,
+                i2s_lrclk_out, i2s_bclk_out, i2s_mclk.
+    drive_pdm
+        pins:   clk_out0, pdm_b, pdm_a.
+    drive_scb0
+        pins:   scb0_sclk, scb0_sdat, pdm_d, pdm_c.
+    drive_sdio
+        pins:   sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, sdio_d3,
+                sdh_wp, sdh_cd, sdh_clk_in.
+
+  convenience groups:
+
+    These are just convenient groupings of pins and don't support any drive
+    configs.
+
+    uart0
+        pins:   uart0_cts, uart0_rts, uart0_rxd, uart0_txd.
+    uart1
+        pins:   uart1_rxd, uart1_txd.
+    scb0
+        pins:   scb0_sclk, scb0_sdat.
+    i2s
+        pins:   i2s_bclk_out, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2,
+                i2s_lrclk_out, i2s_mclk.
+
+Example:
+
+	pinctrl: pinctrl@02005800 {
+		#gpio-range-cells = <3>;
+		compatible = "img,tz1090-pinctrl";
+		reg = <0x02005800 0xe4>;
+	};
+
+Example board file extract:
+
+	&pinctrl {
+		uart0_default: uart0 {
+			uart0_cfg {
+				tz1090,pins =	"uart0_rxd",
+						"uart0_txd";
+				tz1090,function = "perip";
+			};
+		};
+		tft_default: tft {
+			tft_cfg {
+				tz1090,pins =	"tft";
+				tz1090,function = "tft";
+			};
+		};
+	};
+
+	uart@02004b00 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_default>;
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
index a648aaad611..50ec3512a29 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
@@ -10,29 +10,31 @@ Required properties:
 Available mpp pins/groups and functions:
 Note: brackets (x) are not part of the mpp name for marvell,function and given
 only for more detailed description in this document.
+Note: pmu* also allows for Power Management functions listed below
 
 name          pins     functions
 ================================================================================
-mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm)
-mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm)
+mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm), pmu*
+mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm), pmu*
 mpp2          2        gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
-                       uart1(rts)
+                       uart1(rts), pmu*
 mpp3          3        gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
-                       uart1(cts), lcd-spi(cs1)
-mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso)
-mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs)
-mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi)
-mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck)
-mpp8          8        gpio, pmu, watchdog(rstout)
-mpp9          9        gpio, pmu, pex1(clkreq)
-mpp10         10       gpio, pmu, ssp(sclk)
+                       uart1(cts), lcd-spi(cs1), pmu*
+mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso), pmu*
+mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs), pmu*
+mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi), pmu*
+mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck), pmu*
+mpp8          8        gpio, pmu, watchdog(rstout), pmu*
+mpp9          9        gpio, pmu, pex1(clkreq), pmu*
+mpp10         10       gpio, pmu, ssp(sclk), pmu*
 mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
-                       sdio1(ledctrl), pex0(clkreq)
-mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act)
+                       sdio1(ledctrl), pex0(clkreq), pmu*
+mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd),
+                       sata(act), pmu*
 mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
-                       ssp(extclk)
-mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd)
-mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm)
+                       ssp(extclk), pmu*
+mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd), pmu*
+mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm), pmu*
 mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
 mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
                        ac97-1(sysclko)
@@ -57,6 +59,21 @@ mpp_nand      64-71    gpo, nand
 audio0        -        i2s, ac97
 twsi          -        none, opt1, opt2, opt3
 
+Power Management functions (pmu*):
+pmu-nc               Pin not driven by any PM function
+pmu-low              Pin driven low (0)
+pmu-high             Pin driven high (1)
+pmic(sdi)            Pin is used for PMIC SDI
+cpu-pwr-down         Pin is used for CPU_PWRDWN
+standby-pwr-down     Pin is used for STBY_PWRDWN
+core-pwr-good        Pin is used for CORE_PWR_GOOD (Pins 0-7 only)
+cpu-pwr-good         Pin is used for CPU_PWR_GOOD (Pins 8-15 only)
+bat-fault            Pin is used for BATTERY_FAULT
+ext0-wakeup          Pin is used for EXT0_WU
+ext1-wakeup          Pin is used for EXT0_WU
+ext2-wakeup          Pin is used for EXT0_WU
+pmu-blink            Pin is used for blink function
+
 Notes:
 * group "mpp_audio1" allows the following functions and gpio pins:
   - gpio          : gpio on pins 52-57
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index c95ea8278f8..aeb3c995cc0 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -126,3 +126,51 @@ device; they may be grandchildren, for example. Whether this is legal, and
 whether there is any interaction between the child and intermediate parent
 nodes, is again defined entirely by the binding for the individual pin
 controller device.
+
+== Using generic pinconfig options ==
+
+Generic pinconfig parameters can be used by defining a separate node containing
+the applicable parameters (and optional values), like:
+
+pcfg_pull_up: pcfg_pull_up {
+	bias-pull-up;
+	drive-strength = <20>;
+};
+
+This node should then be referenced in the appropriate pinctrl node as a phandle
+and parsed in the driver using the pinconf_generic_parse_dt_config function.
+
+Supported configuration parameters are:
+
+bias-disable		- disable any pin bias
+bias-high-impedance	- high impedance mode ("third-state", "floating")
+bias-bus-hold		- latch weakly
+bias-pull-up		- pull up the pin
+bias-pull-down		- pull down the pin
+bias-pull-pin-default	- use pin-default pull state
+drive-push-pull		- drive actively high and low
+drive-open-drain	- drive with open drain
+drive-open-source	- drive with open source
+drive-strength		- sink or source at most X mA
+input-schmitt-enable	- enable schmitt-trigger mode
+input-schmitt-disable	- disable schmitt-trigger mode
+input-debounce		- debounce mode with debound time X
+low-power-enable	- enable low power mode
+low-power-disable	- disable low power mode
+output-low		- set the pin to output mode with low level
+output-high		- set the pin to output mode with high level
+
+Arguments for parameters:
+
+- bias-pull-up, -down and -pin-default take as optional argument on hardware
+  supporting it the pull strength in Ohm. bias-disable will disable the pull.
+
+- drive-strength takes as argument the target strength in mA.
+
+- input-debounce takes the debounce time in usec as argument
+  or 0 to disable debouncing
+
+All parameters not listed here, do not take an argument.
+
+More in-depth documentation on these parameters can be found in
+<include/linux/pinctrl/pinconfig-generic.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index 08f0c3d0157..5a02e30dd26 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -18,7 +18,8 @@ Optional properties:
   pin functions is ignored
 
 - pinctrl-single,bit-per-mux : boolean to indicate that one register controls
-  more than one pin
+  more than one pin, for which "pinctrl-single,function-mask" property specifies
+ position mask of pin.
 
 - pinctrl-single,drive-strength : array of value that are used to configure
   drive strength in the pinmux register. They're value of drive strength
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
new file mode 100644
index 00000000000..d5dac7b843a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -0,0 +1,153 @@
+* Renesas Pin Function Controller (GPIO and Pin Mux/Config)
+
+The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH7372,
+SH73A0, R8A73A4 and R8A7740 it also acts as a GPIO controller.
+
+
+Pin Control
+-----------
+
+Required Properties:
+
+  - compatible: should be one of the following.
+    - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
+    - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
+    - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
+    - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
+    - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
+    - "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible pin-controller.
+    - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
+
+  - reg: Base address and length of each memory resource used by the pin
+    controller hardware module.
+
+Optional properties:
+
+  - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden
+    otherwise. Should be 3.
+
+The PFC node also acts as a container for pin configuration nodes. Please refer
+to pinctrl-bindings.txt in this directory for the definition of the term "pin
+configuration node" and for the common pinctrl bindings used by client devices.
+
+Each pin configuration node represents a desired configuration for a pin, a
+pin group, or a list of pins or pin groups. The configuration can include the
+function to select on those pin(s) and pin configuration parameters (such as
+pull-up and pull-down).
+
+Pin configuration nodes contain pin configuration properties, either directly
+or grouped in child subnodes. Both pin muxing and configuration parameters can
+be grouped in that way and referenced as a single pin configuration node by
+client devices.
+
+A configuration node or subnode must reference at least one pin (through the
+pins or pin groups properties) and contain at least a function or one
+configuration parameter. When the function is present only pin groups can be
+used to reference pins.
+
+All pin configuration nodes and subnodes names are ignored. All of those nodes
+are parsed through phandles and processed purely based on their content.
+
+Pin Configuration Node Properties:
+
+- renesas,pins : An array of strings, each string containing the name of a pin.
+- renesas,groups : An array of strings, each string containing the name of a pin
+  group.
+
+- renesas,function: A string containing the name of the function to mux to the
+  pin group(s) specified by the renesas,groups property
+
+  Valid values for pin, group and function names can be found in the group and
+  function arrays of the PFC data file corresponding to the SoC
+  (drivers/pinctrl/sh-pfc/pfc-*.c)
+
+The pin configuration parameters use the generic pinconf bindings defined in
+pinctrl-bindings.txt in this directory. The supported parameters are
+bias-disable, bias-pull-up and bias-pull-down.
+
+
+GPIO
+----
+
+On SH7372, SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller
+node.
+
+Required Properties:
+
+  - gpio-controller: Marks the device node as a gpio controller.
+
+  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+
+The syntax of the gpio specifier used by client nodes should be the following
+with values derived from the SoC user manual.
+
+  <[phandle of the gpio controller node]
+   [pin number within the gpio controller]
+   [flags]>
+
+On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
+Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+for documentation of the GPIO device tree bindings on those platforms.
+
+
+Examples
+--------
+
+Example 1: SH73A0 (SH-Mobile AG5) pin controller node
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-sh73a0";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605801c 0x1c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+Example 2: A GPIO LED node that references a GPIO
+
+	#include <dt-bindings/gpio/gpio.h>
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
+           for the MMCIF and SCIFA4 devices
+
+	&pfc {
+		pinctrl-0 = <&scifa4_pins>;
+		pinctrl-names = "default";
+
+		mmcif_pins: mmcif {
+			mux {
+				renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+				renesas,function = "mmc0";
+			};
+			cfg {
+				renesas,groups = "mmc0_data8_0";
+				renesas,pins = "PORT279";
+				bias-pull-up;
+			};
+		};
+
+		scifa4_pins: scifa4 {
+			renesas,groups = "scifa4_data", "scifa4_ctrl";
+			renesas,function = "scifa4";
+		};
+	};
+
+Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device
+
+	&mmcif {
+		pinctrl-0 = <&mmcif_pins>;
+		pinctrl-names = "default";
+
+		bus-width = <8>;
+		vmmc-supply = <&reg_1p8v>;
+		status = "okay";
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
new file mode 100644
index 00000000000..b0fb1018d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -0,0 +1,97 @@
+* Rockchip Pinmux Controller
+
+The Rockchip Pinmux Controller, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+4 muxing options with option 0 being the use as a GPIO.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The Rockchip pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and
+config of the pins in that group. The 'pins' selects the function mode(also
+named pin mode) this pin can work on and the 'config' configures various pad
+settings such as pull-up, etc.
+
+The pins are grouped into up to 5 individual pin banks which need to be
+defined as gpio sub-nodes of the pinmux controller.
+
+Required properties for iomux controller:
+  - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
+		       "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
+
+Required properties for gpio sub nodes:
+  - compatible: "rockchip,gpio-bank"
+  - reg: register of the gpio bank (different than the iomux registerset)
+  - interrupts: base interrupt of the gpio bank in the interrupt controller
+  - clocks: clock that drives this bank
+  - gpio-controller: identifies the node as a gpio controller and pin bank.
+  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+    binding is used, the amount of cells must be specified as 2. See generic
+    GPIO binding documentation for description of particular cells.
+  - interrupt-controller: identifies the controller node as interrupt-parent.
+  - #interrupt-cells: the value of this property should be 2 and the interrupt
+    cells should use the standard two-cell scheme described in
+    bindings/interrupt-controller/interrupts.txt
+
+Required properties for pin configuration node:
+  - rockchip,pins: 3 integers array, represents a group of pins mux and config
+    setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
+    The MUX 0 means gpio and MUX 1 to 3 mean the specific device function.
+    The phandle of a node containing the generic pinconfig options
+    to use, as described in pinctrl-bindings.txt in this directory.
+
+Examples:
+
+#include <dt-bindings/pinctrl/rockchip.h>
+
+...
+
+pinctrl@20008000 {
+	compatible = "rockchip,rk3066a-pinctrl";
+	reg = <0x20008000 0x150>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	gpio0: gpio0@20034000 {
+		compatible = "rockchip,gpio-bank";
+		reg = <0x20034000 0x100>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_gates8 9>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	...
+
+	pcfg_pull_default: pcfg_pull_default {
+		bias-pull-pin-default
+	};
+
+	uart2 {
+		uart2_xfer: uart2-xfer {
+			rockchip,pins = <RK_GPIO1 8 1 &pcfg_pull_default>,
+					<RK_GPIO1 9 1 &pcfg_pull_default>;
+		};
+	};
+};
+
+uart2: serial@20064000 {
+	compatible = "snps,dw-apb-uart";
+	reg = <0x20064000 0x400>;
+	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+	reg-shift = <2>;
+	reg-io-width = <1>;
+	clocks = <&mux_uart2>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_xfer>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
new file mode 100644
index 00000000000..e3865e13606
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
@@ -0,0 +1,352 @@
+ST Ericsson abx500 pinmux controller
+
+Required properties:
+- compatible: "stericsson,ab8500-gpio",  "stericsson,ab8540-gpio",
+	      "stericsson,ab8505-gpio", "stericsson,ab9540-gpio",
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as input, output, pull up, pull down...
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required subnode-properties:
+- ste,pins : An array of strings. Each string contains the name of a pin or
+    group.
+
+Optional subnode-properties:
+- ste,function: A string containing the name of the function to mux to the
+  pin or group.
+
+- generic pin configuration option to use. Example :
+
+	default_cfg {
+		ste,pins = "GPIO1";
+		bias-disable;
+	};
+
+- ste,config: Handle of pin configuration node containing the generic
+  pinconfig options to use, as described in pinctrl-bindings.txt in
+  this directory. Example :
+
+	pcfg_bias_disable: pcfg_bias_disable {
+		bias-disable;
+	};
+
+	default_cfg {
+		ste,pins = "GPIO1";
+		ste.config = <&pcfg_bias_disable>;
+	};
+
+Example board file extract:
+
+&pinctrl_abx500 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sysclkreq2_default_mode>, <&sysclkreq3_default_mode>, <&gpio3_default_mode>, <&sysclkreq6_default_mode>, <&pwmout1_default_mode>, <&pwmout2_default_mode>, <&pwmout3_default_mode>, <&adi1_default_mode>, <&dmic12_default_mode>, <&dmic34_default_mode>, <&dmic56_default_mode>, <&sysclkreq5_default_mode>, <&batremn_default_mode>, <&service_default_mode>, <&pwrctrl0_default_mode>, <&pwrctrl1_default_mode>, <&pwmextvibra1_default_mode>, <&pwmextvibra2_default_mode>, <&gpio51_default_mode>, <&gpio52_default_mode>, <&gpio53_default_mode>, <&gpio54_default_mode>, <&pdmclkdat_default_mode>;
+
+	sysclkreq2 {
+		sysclkreq2_default_mode: sysclkreq2_default {
+			default_mux {
+				ste,function = "sysclkreq";
+				ste,pins = "sysclkreq2_d_1";
+			};
+			default_cfg {
+				ste,pins = "GPIO1";
+				bias-disable;
+			};
+		};
+	};
+	sysclkreq3 {
+		sysclkreq3_default_mode: sysclkreq3_default {
+			default_mux {
+				ste,function = "sysclkreq";
+				ste,pins = "sysclkreq3_d_1";
+			};
+			default_cfg {
+				ste,pins = "GPIO2";
+				output-low;
+			};
+		};
+	};
+	gpio3 {
+		gpio3_default_mode: gpio3_default {
+			default_mux {
+				ste,function = "gpio";
+				ste,pins = "gpio3_a_1";
+			};
+			default_cfg {
+				ste,pins = "GPIO3";
+				output-low;
+			};
+		};
+	};
+	sysclkreq6 {
+		sysclkreq6_default_mode: sysclkreq6_default {
+			default_mux {
+				ste,function = "sysclkreq";
+				ste,pins = "sysclkreq6_d_1";
+			};
+			default_cfg {
+				ste,pins = "GPIO4";
+				bias-disable;
+			};
+		};
+	};
+	pwmout1 {
+		pwmout1_default_mode: pwmout1_default {
+			default_mux {
+				ste,function = "pwmout";
+				ste,pins = "pwmout1_d_1";
+			};
+			default_cfg {
+				ste,pins = "GPIO14";
+				output-low;
+			};
+		};
+	};
+	pwmout2 {
+		pwmout2_default_mode: pwmout2_default {
+			pwmout2_default_mux {
+				ste,function = "pwmout";
+				ste,pins = "pwmout2_d_1";
+			};
+			pwmout2_default_cfg {
+				ste,pins = "GPIO15";
+				output-low;
+			};
+		};
+	};
+	pwmout3 {
+		pwmout3_default_mode: pwmout3_default {
+			pwmout3_default_mux {
+				ste,function = "pwmout";
+				ste,pins = "pwmout3_d_1";
+			};
+			pwmout3_default_cfg {
+				ste,pins = "GPIO16";
+				output-low;
+			};
+		};
+	};
+	adi1 {
+
+		adi1_default_mode: adi1_default {
+			adi1_default_mux {
+				ste,function = "adi1";
+				ste,pins = "adi1_d_1";
+			};
+			adi1_default_cfg1 {
+				ste,pins = "GPIO17","GPIO19","GPIO20";
+				bias-disable;
+			};
+			adi1_default_cfg2 {
+				ste,pins = "GPIO18";
+				output-low;
+			};
+		};
+	};
+	dmic12 {
+		dmic12_default_mode: dmic12_default {
+			dmic12_default_mux {
+				ste,function = "dmic";
+				ste,pins = "dmic12_d_1";
+			};
+			dmic12_default_cfg1 {
+				ste,pins = "GPIO27";
+				output-low;
+			};
+			dmic12_default_cfg2 {
+				ste,pins = "GPIO28";
+				bias-disable;
+			};
+		};
+	};
+	dmic34 {
+		dmic34_default_mode: dmic34_default {
+			dmic34_default_mux {
+				ste,function = "dmic";
+				ste,pins = "dmic34_d_1";
+			};
+			dmic34_default_cfg1 {
+				ste,pins = "GPIO29";
+				output-low;
+			};
+			dmic34_default_cfg2 {
+				ste,pins = "GPIO30";
+				bias-disable;{
+
+			};
+		};
+	};
+	dmic56 {
+		dmic56_default_mode: dmic56_default {
+			dmic56_default_mux {
+				ste,function = "dmic";
+				ste,pins = "dmic56_d_1";
+			};
+			dmic56_default_cfg1 {
+				ste,pins = "GPIO31";
+				output-low;
+			};
+			dmic56_default_cfg2 {
+				ste,pins = "GPIO32";
+				bias-disable;
+			};
+		};
+	};
+	sysclkreq5 {
+		sysclkreq5_default_mode: sysclkreq5_default {
+			sysclkreq5_default_mux {
+				ste,function = "sysclkreq";
+				ste,pins = "sysclkreq5_d_1";
+			};
+			sysclkreq5_default_cfg {
+				ste,pins = "GPIO42";
+				output-low;
+			};
+		};
+	};
+	batremn {
+		batremn_default_mode: batremn_default {
+			batremn_default_mux {
+				ste,function = "batremn";
+				ste,pins = "batremn_d_1";
+			};
+			batremn_default_cfg {
+				ste,pins = "GPIO43";
+				bias-disable;
+			};
+		};
+	};
+	service {
+		service_default_mode: service_default {
+			service_default_mux {
+				ste,function = "service";
+				ste,pins = "service_d_1";
+			};
+			service_default_cfg {
+				ste,pins = "GPIO44";
+				bias-disable;
+			};
+		};
+	};
+	pwrctrl0 {
+		pwrctrl0_default_mux: pwrctrl0_mux {
+			pwrctrl0_default_mux {
+				ste,function = "pwrctrl";
+				ste,pins = "pwrctrl0_d_1";
+			};
+		};
+		pwrctrl0_default_mode: pwrctrl0_default {
+			pwrctrl0_default_cfg {
+				ste,pins = "GPIO45";
+				bias-disable;
+			};
+		};
+	};
+	pwrctrl1 {
+		pwrctrl1_default_mux: pwrctrl1_mux {
+			pwrctrl1_default_mux {
+				ste,function = "pwrctrl";
+				ste,pins = "pwrctrl1_d_1";
+			};
+		};
+		pwrctrl1_default_mode: pwrctrl1_default {
+			pwrctrl1_default_cfg {
+				ste,pins = "GPIO46";
+				bias-disable;
+			};
+		};
+	};
+	pwmextvibra1 {
+		pwmextvibra1_default_mode: pwmextvibra1_default {
+			pwmextvibra1_default_mux {
+				ste,function = "pwmextvibra";
+				ste,pins = "pwmextvibra1_d_1";
+			};
+			pwmextvibra1_default_cfg {
+				ste,pins = "GPIO47";
+				bias-disable;
+			};
+		};
+	};
+	pwmextvibra2 {
+		pwmextvibra2_default_mode: pwmextvibra2_default {
+			pwmextvibra2_default_mux {
+				ste,function = "pwmextvibra";
+				ste,pins = "pwmextvibra2_d_1";
+			};
+			pwmextvibra1_default_cfg {
+				ste,pins = "GPIO48";
+				bias-disable;
+			};
+		};
+	};
+	gpio51 {
+		gpio51_default_mode: gpio51_default {
+				gpio51_default_mux {
+				ste,function = "gpio";
+				ste,pins = "gpio51_a_1";
+			};
+			gpio51_default_cfg {
+				ste,pins = "GPIO51";
+				output-low;
+			};
+		};
+	};
+	gpio52 {
+		gpio52_default_mode: gpio52_default {
+			gpio52_default_mux {
+				ste,function = "gpio";
+				ste,pins = "gpio52_a_1";
+			};
+			gpio52_default_cfg {
+				ste,pins = "GPIO52";
+				bias-pull-down;
+			};
+		};
+	};
+	gpio53 {
+		gpio53_default_mode: gpio53_default {
+			gpio53_default_mux {
+				ste,function = "gpio";
+				ste,pins = "gpio53_a_1";
+			};
+			gpio53_default_cfg {
+				ste,pins = "GPIO53";
+				bias-pull-down;
+			};
+		};
+	};
+	gpio54 {
+		gpio54_default_mode: gpio54_default {
+			gpio54_default_mux {
+				ste,function = "gpio";
+				ste,pins = "gpio54_a_1";
+			};
+			gpio54_default_cfg {
+				ste,pins = "GPIO54";
+				output-low;
+			};
+		};
+	};
+	pdmclkdat {
+		pdmclkdat_default_mode: pdmclkdat_default {
+			pdmclkdat_default_mux {
+				ste,function = "pdm";
+				ste,pins = "pdmclkdat_d_1";
+			};
+			pdmclkdat_default_cfg {
+				ste,pins = "GPIO55", "GPIO56";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index 447fd4cd54e..c5948c7d662 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -203,15 +203,8 @@ using a certain resistor value - pull up and pull down - so that the pin has a
 stable value when nothing is driving the rail it is connected to, or when it's
 unconnected.
 
-Pin configuration can be programmed either using the explicit APIs described
-immediately below, or by adding configuration entries into the mapping table;
-see section "Board/machine configuration" below.
-
-For example, a platform may do the following to pull up a pin to VDD:
-
-#include <linux/pinctrl/consumer.h>
-
-ret = pin_config_set("foo-dev", "FOO_GPIO_PIN", PLATFORM_X_PULL_UP);
+Pin configuration can be programmed by adding configuration entries into the
+mapping table; see section "Board/machine configuration" below.
 
 The format and meaning of the configuration parameter, PLATFORM_X_PULL_UP
 above, is entirely defined by the pin controller driver.
@@ -350,6 +343,23 @@ chip b:
  - GPIO range : [48 .. 55]
  - pin range  : [64 .. 71]
 
+The above examples assume the mapping between the GPIOs and pins is
+linear. If the mapping is sparse or haphazard, an array of arbitrary pin
+numbers can be encoded in the range like this:
+
+static const unsigned range_pins[] = { 14, 1, 22, 17, 10, 8, 6, 2 };
+
+static struct pinctrl_gpio_range gpio_range = {
+	.name = "chip",
+	.id = 0,
+	.base = 32,
+	.pins = &range_pins,
+	.npins = ARRAY_SIZE(range_pins),
+	.gc = &chip;
+};
+
+In this case the pin_base property will be ignored.
+
 When GPIO-specific functions in the pin control subsystem are called, these
 ranges will be used to look up the appropriate pin controller by inspecting
 and matching the pin to the pin ranges across all controllers. When a
@@ -357,9 +367,9 @@ pin controller handling the matching range is found, GPIO-specific functions
 will be called on that specific pin controller.
 
 For all functionalities dealing with pin biasing, pin muxing etc, the pin
-controller subsystem will subtract the range's .base offset from the passed
-in gpio number, and add the ranges's .pin_base offset to retrive a pin number.
-After that, the subsystem passes it on to the pin control driver, so the driver
+controller subsystem will look up the corresponding pin number from the passed
+in gpio number, and use the range's internals to retrive a pin number. After
+that, the subsystem passes it on to the pin control driver, so the driver
 will get an pin number into its handled number range. Further it is also passed
 the range ID value, so that the pin controller knows which range it should
 deal with.
@@ -368,6 +378,7 @@ Calling pinctrl_add_gpio_range from pinctrl driver is DEPRECATED. Please see
 section 2.1 of Documentation/devicetree/bindings/gpio/gpio.txt on how to bind
 pinctrl and gpio drivers.
 
+
 PINMUX interfaces
 =================
 
@@ -1226,8 +1237,8 @@ setting up the config and muxing for the pins right before the device is
 probing, nevertheless orthogonal to the GPIO subsystem.
 
 But there are also situations where it makes sense for the GPIO subsystem
-to communicate directly with with the pinctrl subsystem, using the latter
-as a back-end. This is when the GPIO driver may call out to the functions
+to communicate directly with the pinctrl subsystem, using the latter as a
+back-end. This is when the GPIO driver may call out to the functions
 described in the section "Pin control interaction with the GPIO subsystem"
 above. This only involves per-pin multiplexing, and will be completely
 hidden behind the gpio_*() function namespace. In this case, the driver
diff --git a/MAINTAINERS b/MAINTAINERS
index a98219eb132..ff105830de6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6295,6 +6295,16 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pinctrl/pinctrl-at91.c
 
+PIN CONTROLLER - SAMSUNG
+M:	Tomasz Figa <t.figa@samsung.com>
+M:	Thomas Abraham <thomas.abraham@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pinctrl/pinctrl-exynos.*
+F:	drivers/pinctrl/pinctrl-s3c*
+F:	drivers/pinctrl/pinctrl-samsung.*
+
 PIN CONTROLLER - ST SPEAR
 M:	Viresh Kumar <viresh.linux@gmail.com>
 L:	spear-devel@list.st.com
diff --git a/drivers/base/pinctrl.c b/drivers/base/pinctrl.c
index 67a274e8672..5fb74b43848 100644
--- a/drivers/base/pinctrl.c
+++ b/drivers/base/pinctrl.c
@@ -48,6 +48,25 @@ int pinctrl_bind_pins(struct device *dev)
 		goto cleanup_get;
 	}
 
+#ifdef CONFIG_PM
+	/*
+	 * If power management is enabled, we also look for the optional
+	 * sleep and idle pin states, with semantics as defined in
+	 * <linux/pinctrl/pinctrl-state.h>
+	 */
+	dev->pins->sleep_state = pinctrl_lookup_state(dev->pins->p,
+					PINCTRL_STATE_SLEEP);
+	if (IS_ERR(dev->pins->sleep_state))
+		/* Not supplying this state is perfectly legal */
+		dev_dbg(dev, "no sleep pinctrl state\n");
+
+	dev->pins->idle_state = pinctrl_lookup_state(dev->pins->p,
+					PINCTRL_STATE_IDLE);
+	if (IS_ERR(dev->pins->idle_state))
+		/* Not supplying this state is perfectly legal */
+		dev_dbg(dev, "no idle pinctrl state\n");
+#endif
+
 	return 0;
 
 	/*
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 650293ff4d6..c7e3b0c1a1c 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -148,10 +148,6 @@ struct i2c_nmk_client {
  * @stop: stop condition.
  * @xfer_complete: acknowledge completion for a I2C message.
  * @result: controller propogated result.
- * @pinctrl: pinctrl handle.
- * @pins_default: default state for the pins.
- * @pins_idle: idle state for the pins.
- * @pins_sleep: sleep state for the pins.
  * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
@@ -165,11 +161,6 @@ struct nmk_i2c_dev {
 	int				stop;
 	struct completion		xfer_complete;
 	int				result;
-	/* Three pin states - default, idle & sleep */
-	struct pinctrl			*pinctrl;
-	struct pinctrl_state		*pins_default;
-	struct pinctrl_state		*pins_idle;
-	struct pinctrl_state		*pins_sleep;
 	bool				busy;
 };
 
@@ -645,13 +636,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 	}
 
 	/* Optionaly enable pins to be muxed in and configured */
-	if (!IS_ERR(dev->pins_default)) {
-		status = pinctrl_select_state(dev->pinctrl,
-				dev->pins_default);
-		if (status)
-			dev_err(&dev->adev->dev,
-				"could not set default pins\n");
-	}
+	pinctrl_pm_select_default_state(&dev->adev->dev);
 
 	status = init_hw(dev);
 	if (status)
@@ -681,13 +666,7 @@ out:
 	clk_disable_unprepare(dev->clk);
 out_clk:
 	/* Optionally let pins go into idle state */
-	if (!IS_ERR(dev->pins_idle)) {
-		status = pinctrl_select_state(dev->pinctrl,
-				dev->pins_idle);
-		if (status)
-			dev_err(&dev->adev->dev,
-				"could not set pins to idle state\n");
-	}
+	pinctrl_pm_select_idle_state(&dev->adev->dev);
 
 	pm_runtime_put_sync(&dev->adev->dev);
 
@@ -882,41 +861,22 @@ static int nmk_i2c_suspend(struct device *dev)
 {
 	struct amba_device *adev = to_amba_device(dev);
 	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-	int ret;
 
 	if (nmk_i2c->busy)
 		return -EBUSY;
 
-	if (!IS_ERR(nmk_i2c->pins_sleep)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_sleep);
-		if (ret)
-			dev_err(dev, "could not set pins to sleep state\n");
-	}
+	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
 }
 
 static int nmk_i2c_resume(struct device *dev)
 {
-	struct amba_device *adev = to_amba_device(dev);
-	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-	int ret;
-
 	/* First go to the default state */
-	if (!IS_ERR(nmk_i2c->pins_default)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_default);
-		if (ret)
-			dev_err(dev, "could not set pins to default state\n");
-	}
+	pinctrl_pm_select_default_state(dev);
 	/* Then let's idle the pins until the next transfer happens */
-	if (!IS_ERR(nmk_i2c->pins_idle)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_idle);
-		if (ret)
-			dev_err(dev, "could not set pins to idle state\n");
-	}
+	pinctrl_pm_select_idle_state(dev);
+
 	return 0;
 }
 #else
@@ -1004,39 +964,10 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	dev->adev = adev;
 	amba_set_drvdata(adev, dev);
 
-	dev->pinctrl = devm_pinctrl_get(&adev->dev);
-	if (IS_ERR(dev->pinctrl)) {
-		ret = PTR_ERR(dev->pinctrl);
-		goto err_pinctrl;
-	}
-
-	dev->pins_default = pinctrl_lookup_state(dev->pinctrl,
-						 PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(dev->pins_default)) {
-		dev_err(&adev->dev, "could not get default pinstate\n");
-	} else {
-		ret = pinctrl_select_state(dev->pinctrl,
-					   dev->pins_default);
-		if (ret)
-			dev_dbg(&adev->dev, "could not set default pinstate\n");
-	}
-
-	dev->pins_idle = pinctrl_lookup_state(dev->pinctrl,
-					      PINCTRL_STATE_IDLE);
-	if (IS_ERR(dev->pins_idle)) {
-		dev_dbg(&adev->dev, "could not get idle pinstate\n");
-	} else {
-		/* If possible, let's go to idle until the first transfer */
-		ret = pinctrl_select_state(dev->pinctrl,
-					   dev->pins_idle);
-		if (ret)
-			dev_dbg(&adev->dev, "could not set idle pinstate\n");
-	}
-
-	dev->pins_sleep = pinctrl_lookup_state(dev->pinctrl,
-					       PINCTRL_STATE_SLEEP);
-	if (IS_ERR(dev->pins_sleep))
-		dev_dbg(&adev->dev, "could not get sleep pinstate\n");
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&adev->dev);
+	/* If possible, let's go to idle until the first transfer */
+	pinctrl_pm_select_idle_state(&adev->dev);
 
 	dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
 	if (!dev->virtbase) {
@@ -1106,7 +1037,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	iounmap(dev->virtbase);
  err_no_ioremap:
 	kfree(dev);
- err_pinctrl:
  err_no_mem:
 
 	return ret;
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index d1a769f35f9..da4415d9dee 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -35,6 +35,7 @@
 #include <linux/if_vlan.h>
 
 #include <linux/platform_data/cpsw.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "cpsw_ale.h"
 #include "cpts.h"
@@ -1689,6 +1690,9 @@ static int cpsw_probe(struct platform_device *pdev)
 	 */
 	pm_runtime_enable(&pdev->dev);
 
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&pdev->dev);
+
 	if (cpsw_probe_dt(&priv->data, pdev)) {
 		pr_err("cpsw: platform data missing\n");
 		ret = -ENODEV;
@@ -1981,6 +1985,9 @@ static int cpsw_suspend(struct device *dev)
 	soft_reset("sliver 1", &priv->slaves[1].sliver->soft_reset);
 	pm_runtime_put_sync(&pdev->dev);
 
+	/* Select sleep pin state */
+	pinctrl_pm_select_sleep_state(&pdev->dev);
+
 	return 0;
 }
 
@@ -1990,6 +1997,10 @@ static int cpsw_resume(struct device *dev)
 	struct net_device	*ndev = platform_get_drvdata(pdev);
 
 	pm_runtime_get_sync(&pdev->dev);
+
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&pdev->dev);
+
 	if (netif_running(ndev))
 		cpsw_ndo_open(ndev);
 	return 0;
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index c47f0dbcebb..ce7c4991e41 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -38,6 +38,7 @@
 #include <linux/davinci_emac.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
 
 /*
  * This timeout definition is a worst-case ultra defensive measure against
@@ -347,6 +348,9 @@ static int davinci_mdio_probe(struct platform_device *pdev)
 	data->bus->parent	= dev;
 	data->bus->priv		= data;
 
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&pdev->dev);
+
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 	data->clk = clk_get(&pdev->dev, "fck");
@@ -453,6 +457,9 @@ static int davinci_mdio_suspend(struct device *dev)
 	spin_unlock(&data->lock);
 	pm_runtime_put_sync(data->dev);
 
+	/* Select sleep pin state */
+	pinctrl_pm_select_sleep_state(dev);
+
 	return 0;
 }
 
@@ -460,6 +467,9 @@ static int davinci_mdio_resume(struct device *dev)
 {
 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
 
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(dev);
+
 	pm_runtime_get_sync(data->dev);
 
 	spin_lock(&data->lock);
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 19396c8ffe4..5a8ad513931 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -58,6 +58,18 @@ config PINCTRL_AT91
 	help
 	  Say Y here to enable the at91 pinctrl driver
 
+config PINCTRL_BAYTRAIL
+	bool "Intel Baytrail GPIO pin control"
+	depends on GPIOLIB && ACPI && X86
+        select IRQ_DOMAIN
+	help
+	  driver for memory mapped GPIO functionality on Intel Baytrail
+	  platforms. Supports 3 banks with 102, 28 and 44 gpios.
+	  Most pins are usually muxed to some other functionality by firmware,
+	  so only a small amount is available for gpio use.
+
+	  Requires ACPI device enumeration code to set up a platform device.
+
 config PINCTRL_BCM2835
 	bool
 	select PINMUX
@@ -108,6 +120,14 @@ config PINCTRL_IMX6SL
 	help
 	  Say Y here to enable the imx6sl pinctrl driver
 
+config PINCTRL_VF610
+	bool "Freescale Vybrid VF610 pinctrl driver"
+	depends on OF
+	depends on SOC_VF610
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
+
 config PINCTRL_LANTIQ
 	bool
 	depends on LANTIQ
@@ -150,6 +170,12 @@ config PINCTRL_DB8540
 	bool "DB8540 pin controller driver"
 	depends on PINCTRL_NOMADIK && ARCH_U8500
 
+config PINCTRL_ROCKCHIP
+	bool
+	select PINMUX
+	select GENERIC_PINCONF
+	select GENERIC_IRQ_CHIP
+
 config PINCTRL_SINGLE
 	tristate "One-register-per-pin type device tree based pinctrl driver"
 	depends on OF
@@ -192,6 +218,18 @@ config PINCTRL_TEGRA114
 	bool
 	select PINCTRL_TEGRA
 
+config PINCTRL_TZ1090
+	bool "Toumaz Xenif TZ1090 pin control driver"
+	depends on SOC_TZ1090
+	select PINMUX
+	select GENERIC_PINCONF
+
+config PINCTRL_TZ1090_PDC
+	bool "Toumaz Xenif TZ1090 PDC pin control driver"
+	depends on SOC_TZ1090
+	select PINMUX
+	select PINCONF
+
 config PINCTRL_U300
 	bool "U300 pin controller driver"
 	depends on ARCH_U300
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 76c937cbbb1..d64563bf6fb 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -16,12 +16,14 @@ obj-$(CONFIG_PINCTRL_AB9540)	+= pinctrl-ab9540.o
 obj-$(CONFIG_PINCTRL_AB8505)	+= pinctrl-ab8505.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_BAYTRAIL)	+= pinctrl-baytrail.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX35)	+= pinctrl-imx35.o
 obj-$(CONFIG_PINCTRL_IMX51)	+= pinctrl-imx51.o
 obj-$(CONFIG_PINCTRL_IMX53)	+= pinctrl-imx53.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6q.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6dl.o
+obj-$(CONFIG_PINCTRL_IMX6SL)	+= pinctrl-imx6sl.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
@@ -30,13 +32,16 @@ obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
 obj-$(CONFIG_PINCTRL_STN8815)	+= pinctrl-nomadik-stn8815.o
 obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o
 obj-$(CONFIG_PINCTRL_DB8540)	+= pinctrl-nomadik-db8540.o
+obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
-obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o
+obj-$(CONFIG_PINCTRL_SIRF)	+= sirf/
 obj-$(CONFIG_PINCTRL_SUNXI)	+= pinctrl-sunxi.o
 obj-$(CONFIG_PINCTRL_TEGRA)	+= pinctrl-tegra.o
 obj-$(CONFIG_PINCTRL_TEGRA20)	+= pinctrl-tegra20.o
 obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_TEGRA114)	+= pinctrl-tegra114.o
+obj-$(CONFIG_PINCTRL_TZ1090)	+= pinctrl-tz1090.o
+obj-$(CONFIG_PINCTRL_TZ1090_PDC)	+= pinctrl-tz1090-pdc.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
@@ -47,6 +52,7 @@ obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
+obj-$(CONFIG_PINCTRL_VF610)	+= pinctrl-vf610.o
 
 obj-$(CONFIG_PLAT_ORION)        += mvebu/
 obj-$(CONFIG_ARCH_SHMOBILE)	+= sh-pfc/
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 5327f35d9b5..5b272bfd261 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -41,13 +41,13 @@
 static bool pinctrl_dummy_state;
 
 /* Mutex taken to protect pinctrl_list */
-DEFINE_MUTEX(pinctrl_list_mutex);
+static DEFINE_MUTEX(pinctrl_list_mutex);
 
 /* Mutex taken to protect pinctrl_maps */
 DEFINE_MUTEX(pinctrl_maps_mutex);
 
 /* Mutex taken to protect pinctrldev_list */
-DEFINE_MUTEX(pinctrldev_list_mutex);
+static DEFINE_MUTEX(pinctrldev_list_mutex);
 
 /* Global list of pin control devices (struct pinctrl_dev) */
 static LIST_HEAD(pinctrldev_list);
@@ -101,20 +101,23 @@ EXPORT_SYMBOL_GPL(pinctrl_dev_get_drvdata);
 struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *devname)
 {
 	struct pinctrl_dev *pctldev = NULL;
-	bool found = false;
 
 	if (!devname)
 		return NULL;
 
+	mutex_lock(&pinctrldev_list_mutex);
+
 	list_for_each_entry(pctldev, &pinctrldev_list, node) {
 		if (!strcmp(dev_name(pctldev->dev), devname)) {
 			/* Matched on device name */
-			found = true;
-			break;
+			mutex_unlock(&pinctrldev_list_mutex);
+			return pctldev;
 		}
 	}
 
-	return found ? pctldev : NULL;
+	mutex_unlock(&pinctrldev_list_mutex);
+
+	return NULL;
 }
 
 struct pinctrl_dev *get_pinctrl_dev_from_of_node(struct device_node *np)
@@ -280,6 +283,29 @@ static int pinctrl_register_pins(struct pinctrl_dev *pctldev,
 }
 
 /**
+ * gpio_to_pin() - GPIO range GPIO number to pin number translation
+ * @range: GPIO range used for the translation
+ * @gpio: gpio pin to translate to a pin number
+ *
+ * Finds the pin number for a given GPIO using the specified GPIO range
+ * as a base for translation. The distinction between linear GPIO ranges
+ * and pin list based GPIO ranges is managed correctly by this function.
+ *
+ * This function assumes the gpio is part of the specified GPIO range, use
+ * only after making sure this is the case (e.g. by calling it on the
+ * result of successful pinctrl_get_device_gpio_range calls)!
+ */
+static inline int gpio_to_pin(struct pinctrl_gpio_range *range,
+				unsigned int gpio)
+{
+	unsigned int offset = gpio - range->base;
+	if (range->pins)
+		return range->pins[offset];
+	else
+		return range->pin_base + offset;
+}
+
+/**
  * pinctrl_match_gpio_range() - check if a certain GPIO pin is in range
  * @pctldev: pin controller device to check
  * @gpio: gpio pin to check taken from the global GPIO pin space
@@ -326,6 +352,8 @@ static bool pinctrl_ready_for_gpio_range(unsigned gpio)
 	struct pinctrl_gpio_range *range = NULL;
 	struct gpio_chip *chip = gpio_to_chip(gpio);
 
+	mutex_lock(&pinctrldev_list_mutex);
+
 	/* Loop over the pin controllers */
 	list_for_each_entry(pctldev, &pinctrldev_list, node) {
 		/* Loop over the ranges */
@@ -334,9 +362,13 @@ static bool pinctrl_ready_for_gpio_range(unsigned gpio)
 			if (range->base + range->npins - 1 < chip->base ||
 			    range->base > chip->base + chip->ngpio - 1)
 				continue;
+			mutex_unlock(&pinctrldev_list_mutex);
 			return true;
 		}
 	}
+
+	mutex_unlock(&pinctrldev_list_mutex);
+
 	return false;
 }
 #else
@@ -408,8 +440,6 @@ struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
 {
 	struct pinctrl_dev *pctldev;
 
-	mutex_lock(&pinctrldev_list_mutex);
-
 	pctldev = get_pinctrl_dev_from_devname(devname);
 
 	/*
@@ -418,13 +448,10 @@ struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
 	 * range need to defer probing.
 	 */
 	if (!pctldev) {
-		mutex_unlock(&pinctrldev_list_mutex);
 		return ERR_PTR(-EPROBE_DEFER);
 	}
 	pinctrl_add_gpio_range(pctldev, range);
 
-	mutex_unlock(&pinctrldev_list_mutex);
-
 	return pctldev;
 }
 EXPORT_SYMBOL_GPL(pinctrl_find_and_add_gpio_range);
@@ -438,21 +465,26 @@ struct pinctrl_gpio_range *
 pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev,
 				 unsigned int pin)
 {
-	struct pinctrl_gpio_range *range = NULL;
+	struct pinctrl_gpio_range *range;
 
 	mutex_lock(&pctldev->mutex);
 	/* Loop over the ranges */
 	list_for_each_entry(range, &pctldev->gpio_ranges, node) {
 		/* Check if we're in the valid range */
-		if (pin >= range->pin_base &&
-		    pin < range->pin_base + range->npins) {
-			mutex_unlock(&pctldev->mutex);
-			return range;
-		}
+		if (range->pins) {
+			int a;
+			for (a = 0; a < range->npins; a++) {
+				if (range->pins[a] == pin)
+					goto out;
+			}
+		} else if (pin >= range->pin_base &&
+			   pin < range->pin_base + range->npins)
+			goto out;
 	}
+	range = NULL;
+out:
 	mutex_unlock(&pctldev->mutex);
-
-	return NULL;
+	return range;
 }
 EXPORT_SYMBOL_GPL(pinctrl_find_gpio_range_from_pin);
 
@@ -517,22 +549,18 @@ int pinctrl_request_gpio(unsigned gpio)
 	int ret;
 	int pin;
 
-	mutex_lock(&pinctrldev_list_mutex);
-
 	ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
 	if (ret) {
 		if (pinctrl_ready_for_gpio_range(gpio))
 			ret = 0;
-		mutex_unlock(&pinctrldev_list_mutex);
 		return ret;
 	}
 
 	/* Convert to the pin controllers number space */
-	pin = gpio - range->base + range->pin_base;
+	pin = gpio_to_pin(range, gpio);
 
 	ret = pinmux_request_gpio(pctldev, range, pin, gpio);
 
-	mutex_unlock(&pinctrldev_list_mutex);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(pinctrl_request_gpio);
@@ -552,22 +580,18 @@ void pinctrl_free_gpio(unsigned gpio)
 	int ret;
 	int pin;
 
-	mutex_lock(&pinctrldev_list_mutex);
-
 	ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
 	if (ret) {
-		mutex_unlock(&pinctrldev_list_mutex);
 		return;
 	}
 	mutex_lock(&pctldev->mutex);
 
 	/* Convert to the pin controllers number space */
-	pin = gpio - range->base + range->pin_base;
+	pin = gpio_to_pin(range, gpio);
 
 	pinmux_free_gpio(pctldev, pin, range);
 
 	mutex_unlock(&pctldev->mutex);
-	mutex_unlock(&pinctrldev_list_mutex);
 }
 EXPORT_SYMBOL_GPL(pinctrl_free_gpio);
 
@@ -578,22 +602,18 @@ static int pinctrl_gpio_direction(unsigned gpio, bool input)
 	int ret;
 	int pin;
 
-	mutex_lock(&pinctrldev_list_mutex);
-
 	ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
 	if (ret) {
-		mutex_unlock(&pinctrldev_list_mutex);
 		return ret;
 	}
 
 	mutex_lock(&pctldev->mutex);
 
 	/* Convert to the pin controllers number space */
-	pin = gpio - range->base + range->pin_base;
+	pin = gpio_to_pin(range, gpio);
 	ret = pinmux_gpio_direction(pctldev, range, pin, input);
 
 	mutex_unlock(&pctldev->mutex);
-	mutex_unlock(&pinctrldev_list_mutex);
 
 	return ret;
 }
@@ -1204,6 +1224,69 @@ int pinctrl_force_default(struct pinctrl_dev *pctldev)
 }
 EXPORT_SYMBOL_GPL(pinctrl_force_default);
 
+#ifdef CONFIG_PM
+
+/**
+ * pinctrl_pm_select_default_state() - select default pinctrl state for PM
+ * @dev: device to select default state for
+ */
+int pinctrl_pm_select_default_state(struct device *dev)
+{
+	struct dev_pin_info *pins = dev->pins;
+	int ret;
+
+	if (!pins)
+		return 0;
+	if (IS_ERR(pins->default_state))
+		return 0; /* No default state */
+	ret = pinctrl_select_state(pins->p, pins->default_state);
+	if (ret)
+		dev_err(dev, "failed to activate default pinctrl state\n");
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pinctrl_pm_select_default_state);
+
+/**
+ * pinctrl_pm_select_sleep_state() - select sleep pinctrl state for PM
+ * @dev: device to select sleep state for
+ */
+int pinctrl_pm_select_sleep_state(struct device *dev)
+{
+	struct dev_pin_info *pins = dev->pins;
+	int ret;
+
+	if (!pins)
+		return 0;
+	if (IS_ERR(pins->sleep_state))
+		return 0; /* No sleep state */
+	ret = pinctrl_select_state(pins->p, pins->sleep_state);
+	if (ret)
+		dev_err(dev, "failed to activate pinctrl sleep state\n");
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pinctrl_pm_select_sleep_state);
+
+/**
+ * pinctrl_pm_select_idle_state() - select idle pinctrl state for PM
+ * @dev: device to select idle state for
+ */
+int pinctrl_pm_select_idle_state(struct device *dev)
+{
+	struct dev_pin_info *pins = dev->pins;
+	int ret;
+
+	if (!pins)
+		return 0;
+	if (IS_ERR(pins->idle_state))
+		return 0; /* No idle state */
+	ret = pinctrl_select_state(pins->p, pins->idle_state);
+	if (ret)
+		dev_err(dev, "failed to activate pinctrl idle state\n");
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pinctrl_pm_select_idle_state);
+#endif
+
 #ifdef CONFIG_DEBUG_FS
 
 static int pinctrl_pins_show(struct seq_file *s, void *what)
@@ -1296,11 +1379,21 @@ static int pinctrl_gpioranges_show(struct seq_file *s, void *what)
 
 	/* Loop over the ranges */
 	list_for_each_entry(range, &pctldev->gpio_ranges, node) {
-		seq_printf(s, "%u: %s GPIOS [%u - %u] PINS [%u - %u]\n",
-			   range->id, range->name,
-			   range->base, (range->base + range->npins - 1),
-			   range->pin_base,
-			   (range->pin_base + range->npins - 1));
+		if (range->pins) {
+			int a;
+			seq_printf(s, "%u: %s GPIOS [%u - %u] PINS {",
+				range->id, range->name,
+				range->base, (range->base + range->npins - 1));
+			for (a = 0; a < range->npins - 1; a++)
+				seq_printf(s, "%u, ", range->pins[a]);
+			seq_printf(s, "%u}\n", range->pins[a]);
+		}
+		else
+			seq_printf(s, "%u: %s GPIOS [%u - %u] PINS [%u - %u]\n",
+				range->id, range->name,
+				range->base, (range->base + range->npins - 1),
+				range->pin_base,
+				(range->pin_base + range->npins - 1));
 	}
 
 	mutex_unlock(&pctldev->mutex);
diff --git a/drivers/pinctrl/mvebu/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c
index 428ea96a94d..048ae80adab 100644
--- a/drivers/pinctrl/mvebu/pinctrl-dove.c
+++ b/drivers/pinctrl/mvebu/pinctrl-dove.c
@@ -26,6 +26,9 @@
 #define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE + 0xd0200)
 #define DOVE_PMU_MPP_GENERAL_CTRL	(DOVE_MPP_VIRT_BASE + 0x10)
 #define  DOVE_AU0_AC97_SEL		BIT(16)
+#define DOVE_PMU_SIGNAL_SELECT_0	(DOVE_SB_REGS_VIRT_BASE + 0xd802C)
+#define DOVE_PMU_SIGNAL_SELECT_1	(DOVE_SB_REGS_VIRT_BASE + 0xd8030)
+#define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
 #define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
 #define  DOVE_TWSI_ENABLE_OPTION1	BIT(7)
 #define DOVE_GLOBAL_CONFIG_2		(DOVE_SB_REGS_VIRT_BASE + 0xe8030)
@@ -58,12 +61,16 @@ static int dove_pmu_mpp_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
 	unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS;
 	unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS;
 	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
-	unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
-
-	if (pmu & (1 << ctrl->pid))
-		*config = CONFIG_PMU;
-	else
-		*config = (mpp >> shift) & MPP_MASK;
+	unsigned long func;
+
+	if (pmu & (1 << ctrl->pid)) {
+		func = readl(DOVE_PMU_SIGNAL_SELECT_0 + off);
+		*config = (func >> shift) & MPP_MASK;
+		*config |= CONFIG_PMU;
+	} else {
+		func = readl(DOVE_MPP_VIRT_BASE + off);
+		*config = (func >> shift) & MPP_MASK;
+	}
 	return 0;
 }
 
@@ -73,15 +80,20 @@ static int dove_pmu_mpp_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 	unsigned off = (ctrl->pid / MPPS_PER_REG) * MPP_BITS;
 	unsigned shift = (ctrl->pid % MPPS_PER_REG) * MPP_BITS;
 	unsigned long pmu = readl(DOVE_PMU_MPP_GENERAL_CTRL);
-	unsigned long mpp = readl(DOVE_MPP_VIRT_BASE + off);
+	unsigned long func;
 
-	if (config == CONFIG_PMU)
+	if (config & CONFIG_PMU) {
 		writel(pmu | (1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
-	else {
+		func = readl(DOVE_PMU_SIGNAL_SELECT_0 + off);
+		func &= ~(MPP_MASK << shift);
+		func |= (config & MPP_MASK) << shift;
+		writel(func, DOVE_PMU_SIGNAL_SELECT_0 + off);
+	} else {
 		writel(pmu & ~(1 << ctrl->pid), DOVE_PMU_MPP_GENERAL_CTRL);
-		mpp &= ~(MPP_MASK << shift);
-		mpp |= config << shift;
-		writel(mpp, DOVE_MPP_VIRT_BASE + off);
+		func = readl(DOVE_MPP_VIRT_BASE + off);
+		func &= ~(MPP_MASK << shift);
+		func |= (config & MPP_MASK) << shift;
+		writel(func, DOVE_MPP_VIRT_BASE + off);
 	}
 	return 0;
 }
@@ -378,20 +390,53 @@ static struct mvebu_mpp_mode dove_mpp_modes[] = {
 		MPP_FUNCTION(0x02, "uart2", "rts"),
 		MPP_FUNCTION(0x03, "sdio0", "cd"),
 		MPP_FUNCTION(0x0f, "lcd0", "pwm"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "core-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(1,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart2", "cts"),
 		MPP_FUNCTION(0x03, "sdio0", "wp"),
 		MPP_FUNCTION(0x0f, "lcd1", "pwm"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "core-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(2,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x01, "sata", "prsnt"),
 		MPP_FUNCTION(0x02, "uart2", "txd"),
 		MPP_FUNCTION(0x03, "sdio0", "buspwr"),
 		MPP_FUNCTION(0x04, "uart1", "rts"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "core-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(3,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x01, "sata", "act"),
@@ -399,43 +444,131 @@ static struct mvebu_mpp_mode dove_mpp_modes[] = {
 		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
 		MPP_FUNCTION(0x04, "uart1", "cts"),
 		MPP_FUNCTION(0x0f, "lcd-spi", "cs1"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "core-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(4,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart3", "rts"),
 		MPP_FUNCTION(0x03, "sdio1", "cd"),
 		MPP_FUNCTION(0x04, "spi1", "miso"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "core-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(5,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart3", "cts"),
 		MPP_FUNCTION(0x03, "sdio1", "wp"),
 		MPP_FUNCTION(0x04, "spi1", "cs"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "core-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(6,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart3", "txd"),
 		MPP_FUNCTION(0x03, "sdio1", "buspwr"),
 		MPP_FUNCTION(0x04, "spi1", "mosi"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "core-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(7,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart3", "rxd"),
 		MPP_FUNCTION(0x03, "sdio1", "ledctrl"),
 		MPP_FUNCTION(0x04, "spi1", "sck"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "core-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(8,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x01, "watchdog", "rstout"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "cpu-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(9,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x05, "pex1", "clkreq"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "cpu-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(10,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x05, "ssp", "sclk"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "cpu-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(11,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x01, "sata", "prsnt"),
@@ -443,33 +576,88 @@ static struct mvebu_mpp_mode dove_mpp_modes[] = {
 		MPP_FUNCTION(0x03, "sdio0", "ledctrl"),
 		MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
 		MPP_FUNCTION(0x05, "pex0", "clkreq"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "cpu-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(12,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x01, "sata", "act"),
 		MPP_FUNCTION(0x02, "uart2", "rts"),
 		MPP_FUNCTION(0x03, "audio0", "extclk"),
 		MPP_FUNCTION(0x04, "sdio1", "cd"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "cpu-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(13,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart2", "cts"),
 		MPP_FUNCTION(0x03, "audio1", "extclk"),
 		MPP_FUNCTION(0x04, "sdio1", "wp"),
 		MPP_FUNCTION(0x05, "ssp", "extclk"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "cpu-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(14,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart2", "txd"),
 		MPP_FUNCTION(0x04, "sdio1", "buspwr"),
 		MPP_FUNCTION(0x05, "ssp", "rxd"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "cpu-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(15,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart2", "rxd"),
 		MPP_FUNCTION(0x04, "sdio1", "ledctrl"),
 		MPP_FUNCTION(0x05, "ssp", "sfrm"),
-		MPP_FUNCTION(0x10, "pmu", NULL)),
+		MPP_FUNCTION(CONFIG_PMU | 0x0, "pmu-nc", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x1, "pmu-low", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x2, "pmu-high", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x3, "pmic", "sdi"),
+		MPP_FUNCTION(CONFIG_PMU | 0x4, "cpu-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x5, "standby-pwr-down", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0x8, "cpu-pwr-good", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xa, "bat-fault", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xb, "ext0-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xc, "ext1-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xd, "ext2-wakeup", NULL),
+		MPP_FUNCTION(CONFIG_PMU | 0xe, "pmu-blink", NULL)),
 	MPP_MODE(16,
 		MPP_FUNCTION(0x00, "gpio", NULL),
 		MPP_FUNCTION(0x02, "uart3", "rts"),
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index 2ad5a8d337b..8594f033ac2 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -21,6 +21,7 @@
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/of.h>
 #include "core.h"
 #include "pinconf.h"
 
@@ -37,14 +38,18 @@ struct pin_config_item {
 static struct pin_config_item conf_items[] = {
 	PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL),
 	PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL),
+	PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL),
 	PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL),
 	PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL),
+	PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
+				"input bias pull to pin specific state", NULL),
 	PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL),
 	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL),
 	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL),
+	PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH, "output drive strength", "mA"),
 	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL),
 	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL),
-	PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"),
+	PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "usec"),
 	PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"),
 	PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL),
 	PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode"),
@@ -135,3 +140,100 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 }
 EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
 #endif
+
+#ifdef CONFIG_OF
+struct pinconf_generic_dt_params {
+	const char * const property;
+	enum pin_config_param param;
+	u32 default_value;
+};
+
+static struct pinconf_generic_dt_params dt_params[] = {
+	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
+	{ "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 },
+	{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
+	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
+	{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
+	{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
+	{ "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 },
+	{ "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 },
+	{ "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 },
+	{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
+	{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
+	{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
+	{ "input-debounce", PIN_CONFIG_INPUT_DEBOUNCE, 0 },
+	{ "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 },
+	{ "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 },
+	{ "output-low", PIN_CONFIG_OUTPUT, 0, },
+	{ "output-high", PIN_CONFIG_OUTPUT, 1, },
+};
+
+/**
+ * pinconf_generic_parse_dt_config()
+ * parse the config properties into generic pinconfig values.
+ * @np: node containing the pinconfig properties
+ * @configs: array with nconfigs entries containing the generic pinconf values
+ * @nconfigs: umber of configurations
+ */
+int pinconf_generic_parse_dt_config(struct device_node *np,
+				    unsigned long **configs,
+				    unsigned int *nconfigs)
+{
+	unsigned long *cfg;
+	unsigned int ncfg = 0;
+	int ret;
+	int i;
+	u32 val;
+
+	if (!np)
+		return -EINVAL;
+
+	/* allocate a temporary array big enough to hold one of each option */
+	cfg = kzalloc(sizeof(*cfg) * ARRAY_SIZE(dt_params), GFP_KERNEL);
+	if (!cfg)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
+		struct pinconf_generic_dt_params *par = &dt_params[i];
+		ret = of_property_read_u32(np, par->property, &val);
+
+		/* property not found */
+		if (ret == -EINVAL)
+			continue;
+
+		/* use default value, when no value is specified */
+		if (ret)
+			val = par->default_value;
+
+		pr_debug("found %s with value %u\n", par->property, val);
+		cfg[ncfg] = pinconf_to_config_packed(par->param, val);
+		ncfg++;
+	}
+
+	ret = 0;
+
+	/* no configs found at all */
+	if (ncfg == 0) {
+		*configs = NULL;
+		*nconfigs = 0;
+		goto out;
+	}
+
+	/*
+	 * Now limit the number of configs to the real number of
+	 * found properties.
+	 */
+	*configs = kzalloc(ncfg * sizeof(unsigned long), GFP_KERNEL);
+	if (!*configs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(*configs, cfg, ncfg * sizeof(unsigned long));
+	*nconfigs = ncfg;
+
+out:
+	kfree(cfg);
+	return ret;
+}
+#endif
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index 694c3ace452..e875f21a590 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -75,98 +75,6 @@ int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
 	return ops->pin_config_get(pctldev, pin, config);
 }
 
-/**
- * pin_config_get() - get the configuration of a single pin parameter
- * @dev_name: name of the pin controller device for this pin
- * @name: name of the pin to get the config for
- * @config: the config pointed to by this argument will be filled in with the
- *	current pin state, it can be used directly by drivers as a numeral, or
- *	it can be dereferenced to any struct.
- */
-int pin_config_get(const char *dev_name, const char *name,
-			  unsigned long *config)
-{
-	struct pinctrl_dev *pctldev;
-	int pin;
-
-	pctldev = get_pinctrl_dev_from_devname(dev_name);
-	if (!pctldev) {
-		pin = -EINVAL;
-		return pin;
-	}
-
-	mutex_lock(&pctldev->mutex);
-
-	pin = pin_get_from_name(pctldev, name);
-	if (pin < 0)
-		goto unlock;
-
-	pin = pin_config_get_for_pin(pctldev, pin, config);
-
-unlock:
-	mutex_unlock(&pctldev->mutex);
-	return pin;
-}
-EXPORT_SYMBOL(pin_config_get);
-
-static int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
-			   unsigned long config)
-{
-	const struct pinconf_ops *ops = pctldev->desc->confops;
-	int ret;
-
-	if (!ops || !ops->pin_config_set) {
-		dev_err(pctldev->dev, "cannot configure pin, missing "
-			"config function in driver\n");
-		return -EINVAL;
-	}
-
-	ret = ops->pin_config_set(pctldev, pin, config);
-	if (ret) {
-		dev_err(pctldev->dev,
-			"unable to set pin configuration on pin %d\n", pin);
-		return ret;
-	}
-
-	return 0;
-}
-
-/**
- * pin_config_set() - set the configuration of a single pin parameter
- * @dev_name: name of pin controller device for this pin
- * @name: name of the pin to set the config for
- * @config: the config in this argument will contain the desired pin state, it
- *	can be used directly by drivers as a numeral, or it can be dereferenced
- *	to any struct.
- */
-int pin_config_set(const char *dev_name, const char *name,
-		   unsigned long config)
-{
-	struct pinctrl_dev *pctldev;
-	int pin, ret;
-
-	pctldev = get_pinctrl_dev_from_devname(dev_name);
-	if (!pctldev) {
-		ret = -EINVAL;
-		return ret;
-	}
-
-	mutex_lock(&pctldev->mutex);
-
-	pin = pin_get_from_name(pctldev, name);
-	if (pin < 0) {
-		ret = pin;
-		goto unlock;
-	}
-
-	ret = pin_config_set_for_pin(pctldev, pin, config);
-
-unlock:
-	mutex_unlock(&pctldev->mutex);
-	return ret;
-}
-EXPORT_SYMBOL(pin_config_set);
-
 int pin_config_group_get(const char *dev_name, const char *pin_group,
 			 unsigned long *config)
 {
@@ -204,88 +112,6 @@ unlock:
 	mutex_unlock(&pctldev->mutex);
 	return ret;
 }
-EXPORT_SYMBOL(pin_config_group_get);
-
-int pin_config_group_set(const char *dev_name, const char *pin_group,
-			 unsigned long config)
-{
-	struct pinctrl_dev *pctldev;
-	const struct pinconf_ops *ops;
-	const struct pinctrl_ops *pctlops;
-	int selector;
-	const unsigned *pins;
-	unsigned num_pins;
-	int ret;
-	int i;
-
-	pctldev = get_pinctrl_dev_from_devname(dev_name);
-	if (!pctldev) {
-		ret = -EINVAL;
-		return ret;
-	}
-
-	mutex_lock(&pctldev->mutex);
-
-	ops = pctldev->desc->confops;
-	pctlops = pctldev->desc->pctlops;
-
-	if (!ops || (!ops->pin_config_group_set && !ops->pin_config_set)) {
-		dev_err(pctldev->dev, "cannot configure pin group, missing "
-			"config function in driver\n");
-		ret = -EINVAL;
-		goto unlock;
-	}
-
-	selector = pinctrl_get_group_selector(pctldev, pin_group);
-	if (selector < 0) {
-		ret = selector;
-		goto unlock;
-	}
-
-	ret = pctlops->get_group_pins(pctldev, selector, &pins, &num_pins);
-	if (ret) {
-		dev_err(pctldev->dev, "cannot configure pin group, error "
-			"getting pins\n");
-		goto unlock;
-	}
-
-	/*
-	 * If the pin controller supports handling entire groups we use that
-	 * capability.
-	 */
-	if (ops->pin_config_group_set) {
-		ret = ops->pin_config_group_set(pctldev, selector, config);
-		/*
-		 * If the pin controller prefer that a certain group be handled
-		 * pin-by-pin as well, it returns -EAGAIN.
-		 */
-		if (ret != -EAGAIN)
-			goto unlock;
-	}
-
-	/*
-	 * If the controller cannot handle entire groups, we configure each pin
-	 * individually.
-	 */
-	if (!ops->pin_config_set) {
-		ret = 0;
-		goto unlock;
-	}
-
-	for (i = 0; i < num_pins; i++) {
-		ret = ops->pin_config_set(pctldev, pins[i], config);
-		if (ret < 0)
-			goto unlock;
-	}
-
-	ret = 0;
-
-unlock:
-	mutex_unlock(&pctldev->mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(pin_config_group_set);
 
 int pinconf_map_to_setting(struct pinctrl_map const *map,
 			  struct pinctrl_setting *setting)
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
index 92c7267244d..a4a5417e141 100644
--- a/drivers/pinctrl/pinconf.h
+++ b/drivers/pinctrl/pinconf.h
@@ -123,3 +123,9 @@ static inline void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 	return;
 }
 #endif
+
+#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF)
+int pinconf_generic_parse_dt_config(struct device_node *np,
+				    unsigned long **configs,
+				    unsigned int *nconfigs);
+#endif
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 6d4532702f8..1d3f988c2c8 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -30,8 +30,11 @@
 #include <linux/pinctrl/pinmux.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/machine.h>
 
 #include "pinctrl-abx500.h"
+#include "core.h"
+#include "pinconf.h"
 
 /*
  * The AB9540 and AB8540 GPIO support are extended versions
@@ -93,13 +96,15 @@
 #define AB8540_GPIOX_VBAT_START	51
 #define AB8540_GPIOX_VBAT_END	54
 
+#define ABX500_GPIO_INPUT	0
+#define ABX500_GPIO_OUTPUT	1
+
 struct abx500_pinctrl {
 	struct device *dev;
 	struct pinctrl_dev *pctldev;
 	struct abx500_pinctrl_soc_data *soc;
 	struct gpio_chip chip;
 	struct ab8500 *parent;
-	struct mutex lock;
 	struct abx500_gpio_irq_cluster *irq_cluster;
 	int irq_cluster_size;
 };
@@ -129,8 +134,8 @@ static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg,
 
 	if (ret < 0)
 		dev_err(pct->dev,
-			"%s read reg =%x, offset=%x failed\n",
-			__func__, reg, offset);
+			"%s read reg =%x, offset=%x failed (%d)\n",
+			__func__, reg, offset, ret);
 
 	return ret;
 }
@@ -146,7 +151,8 @@ static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
 	ret = abx500_mask_and_set_register_interruptible(pct->dev,
 				AB8500_MISC, reg, BIT(pos), val << pos);
 	if (ret < 0)
-		dev_err(pct->dev, "%s write failed\n", __func__);
+		dev_err(pct->dev, "%s write reg, %x offset %x failed (%d)\n",
+				__func__, reg, offset, ret);
 
 	return ret;
 }
@@ -160,12 +166,24 @@ static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
 	bool bit;
+	bool is_out;
+	u8 gpio_offset = offset - 1;
 	int ret;
 
-	ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG,
-				  offset, &bit);
+	ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG,
+			gpio_offset, &is_out);
+	if (ret < 0)
+		goto out;
+
+	if (is_out)
+		ret = abx500_gpio_get_bit(chip, AB8500_GPIO_OUT1_REG,
+				gpio_offset, &bit);
+	else
+		ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG,
+				gpio_offset, &bit);
+out:
 	if (ret < 0) {
-		dev_err(pct->dev, "%s failed\n", __func__);
+		dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
 		return ret;
 	}
 
@@ -179,13 +197,14 @@ static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 
 	ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
 	if (ret < 0)
-		dev_err(pct->dev, "%s write failed\n", __func__);
+		dev_err(pct->dev, "%s write failed (%d)\n", __func__, ret);
 }
 
-static int abx500_config_pull_updown(struct abx500_pinctrl *pct,
-				     int offset, enum abx500_gpio_pull_updown val)
+static int abx500_get_pull_updown(struct abx500_pinctrl *pct, int offset,
+				  enum abx500_gpio_pull_updown *pull_updown)
 {
 	u8 pos;
+	u8 val;
 	int ret;
 	struct pullud *pullud;
 
@@ -204,7 +223,41 @@ static int abx500_config_pull_updown(struct abx500_pinctrl *pct,
 		goto out;
 	}
 
-	pos = offset << 1;
+	ret = abx500_get_register_interruptible(pct->dev,
+			AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG, &val);
+
+	pos = (offset - pullud->first_pin) << 1;
+	*pull_updown = (val >> pos) & AB8540_GPIO_PULL_UPDOWN_MASK;
+
+out:
+	if (ret < 0)
+		dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
+
+	return ret;
+}
+
+static int abx500_set_pull_updown(struct abx500_pinctrl *pct,
+				  int offset, enum abx500_gpio_pull_updown val)
+{
+	u8 pos;
+	int ret;
+	struct pullud *pullud;
+
+	if (!pct->soc->pullud) {
+		dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature",
+				__func__);
+		ret = -EPERM;
+		goto out;
+	}
+
+	pullud = pct->soc->pullud;
+
+	if ((offset < pullud->first_pin)
+		|| (offset > pullud->last_pin)) {
+		ret = -EINVAL;
+		goto out;
+	}
+	pos = (offset - pullud->first_pin) << 1;
 
 	ret = abx500_mask_and_set_register_interruptible(pct->dev,
 			AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG,
@@ -217,33 +270,51 @@ out:
 	return ret;
 }
 
+static bool abx500_pullud_supported(struct gpio_chip *chip, unsigned gpio)
+{
+	struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+	struct pullud *pullud = pct->soc->pullud;
+
+	return (pullud &&
+		gpio >= pullud->first_pin &&
+		gpio <= pullud->last_pin);
+}
+
 static int abx500_gpio_direction_output(struct gpio_chip *chip,
 					unsigned offset,
 					int val)
 {
 	struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
-	struct pullud *pullud = pct->soc->pullud;
 	unsigned gpio;
 	int ret;
 
 	/* set direction as output */
-	ret = abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
+	ret = abx500_gpio_set_bits(chip,
+				AB8500_GPIO_DIR1_REG,
+				offset,
+				ABX500_GPIO_OUTPUT);
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	/* disable pull down */
-	ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1);
+	ret = abx500_gpio_set_bits(chip,
+				AB8500_GPIO_PUD1_REG,
+				offset,
+				ABX500_GPIO_PULL_NONE);
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	/* if supported, disable both pull down and pull up */
 	gpio = offset + 1;
-	if (pullud && gpio >= pullud->first_pin && gpio <= pullud->last_pin) {
-		ret = abx500_config_pull_updown(pct,
+	if (abx500_pullud_supported(chip, gpio)) {
+		ret = abx500_set_pull_updown(pct,
 				gpio,
 				ABX500_GPIO_PULL_NONE);
-		if (ret < 0)
-			return ret;
+	}
+out:
+	if (ret < 0) {
+		dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
+		return ret;
 	}
 
 	/* set the output as 1 or 0 */
@@ -253,7 +324,10 @@ static int abx500_gpio_direction_output(struct gpio_chip *chip,
 static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	/* set the register as input */
-	return abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0);
+	return abx500_gpio_set_bits(chip,
+				AB8500_GPIO_DIR1_REG,
+				offset,
+				ABX500_GPIO_INPUT);
 }
 
 static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
@@ -338,10 +412,16 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 		if (af.alt_bit1 != UNUSED) {
 			ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
 					offset, 0);
+			if (ret < 0)
+				goto out;
+
 			ret = abx500_gpio_set_bits(chip,
 					AB8500_GPIO_ALTFUN_REG,
 					af.alt_bit1,
 					!!(af.alta_val && BIT(0)));
+			if (ret < 0)
+				goto out;
+
 			if (af.alt_bit2 != UNUSED)
 				ret = abx500_gpio_set_bits(chip,
 					AB8500_GPIO_ALTFUN_REG,
@@ -355,8 +435,14 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 	case ABX500_ALT_B:
 		ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
 				offset, 0);
+		if (ret < 0)
+			goto out;
+
 		ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
 				af.alt_bit1, !!(af.altb_val && BIT(0)));
+		if (ret < 0)
+			goto out;
+
 		if (af.alt_bit2 != UNUSED)
 			ret = abx500_gpio_set_bits(chip,
 					AB8500_GPIO_ALTFUN_REG,
@@ -367,8 +453,14 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 	case ABX500_ALT_C:
 		ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
 				offset, 0);
+		if (ret < 0)
+			goto out;
+
 		ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
 				af.alt_bit2, !!(af.altc_val && BIT(0)));
+		if (ret < 0)
+			goto out;
+
 		ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
 				af.alt_bit2, !!(af.altc_val && BIT(1)));
 		break;
@@ -378,11 +470,14 @@ static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 
 		return -EINVAL;
 	}
+out:
+	if (ret < 0)
+		dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
 
 	return ret;
 }
 
-static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
+static int abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 			  unsigned gpio)
 {
 	u8 mode;
@@ -393,6 +488,7 @@ static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 	struct alternate_functions af = pct->soc->alternate_functions[gpio];
 	/* on ABx5xx, there is no GPIO0, so adjust the offset */
 	unsigned offset = gpio - 1;
+	int ret;
 
 	/*
 	 * if gpiosel_bit is set to unused,
@@ -402,8 +498,11 @@ static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 		return ABX500_DEFAULT;
 
 	/* read GpioSelx register */
-	abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8),
+	ret = abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8),
 			af.gpiosel_bit, &bit_mode);
+	if (ret < 0)
+		goto out;
+
 	mode = bit_mode;
 
 	/* sanity check */
@@ -435,14 +534,19 @@ static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 	 * pin use the AlternatFunction register
 	 * read alt_bit1 value
 	 */
-	abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
+	ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
 			    af.alt_bit1, &alt_bit1);
+	if (ret < 0)
+		goto out;
 
-	if (af.alt_bit2 != UNUSED)
+	if (af.alt_bit2 != UNUSED) {
 		/* read alt_bit2 value */
-		abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2,
+		ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
+				af.alt_bit2,
 				&alt_bit2);
-	else
+		if (ret < 0)
+			goto out;
+	} else
 		alt_bit2 = 0;
 
 	mode = (alt_bit2 << 1) + alt_bit1;
@@ -452,6 +556,10 @@ static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
 		return ABX500_ALT_B;
 	else
 		return ABX500_ALT_C;
+
+out:
+	dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
+	return ret;
 }
 
 #ifdef CONFIG_DEBUG_FS
@@ -463,11 +571,14 @@ static void abx500_gpio_dbg_show_one(struct seq_file *s,
 				     struct gpio_chip *chip,
 				     unsigned offset, unsigned gpio)
 {
+	struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
 	const char *label = gpiochip_is_requested(chip, offset - 1);
 	u8 gpio_offset = offset - 1;
 	int mode = -1;
 	bool is_out;
-	bool pull;
+	bool pd;
+	enum abx500_gpio_pull_updown pud = 0;
+	int ret;
 
 	const char *modes[] = {
 		[ABX500_DEFAULT]	= "default",
@@ -476,21 +587,48 @@ static void abx500_gpio_dbg_show_one(struct seq_file *s,
 		[ABX500_ALT_C]		= "altC",
 	};
 
-	abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, gpio_offset, &is_out);
-	abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG, gpio_offset, &pull);
+	const char *pull_up_down[] = {
+		[ABX500_GPIO_PULL_DOWN]		= "pull down",
+		[ABX500_GPIO_PULL_NONE]		= "pull none",
+		[ABX500_GPIO_PULL_NONE + 1]	= "pull none",
+		[ABX500_GPIO_PULL_UP]		= "pull up",
+	};
+
+	ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG,
+			gpio_offset, &is_out);
+	if (ret < 0)
+		goto out;
+
+	seq_printf(s, " gpio-%-3d (%-20.20s) %-3s",
+		   gpio, label ?: "(none)",
+		   is_out ? "out" : "in ");
+
+	if (!is_out) {
+		if (abx500_pullud_supported(chip, offset)) {
+			ret = abx500_get_pull_updown(pct, offset, &pud);
+			if (ret < 0)
+				goto out;
+
+			seq_printf(s, " %-9s", pull_up_down[pud]);
+		} else {
+			ret = abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG,
+					gpio_offset, &pd);
+			if (ret < 0)
+				goto out;
+
+			seq_printf(s, " %-9s", pull_up_down[pd]);
+		}
+	} else
+		seq_printf(s, " %-9s", chip->get(chip, offset) ? "hi" : "lo");
 
 	if (pctldev)
 		mode = abx500_get_mode(pctldev, chip, offset);
 
-	seq_printf(s, " gpio-%-3d (%-20.20s) %-3s %-9s %s",
-		   gpio, label ?: "(none)",
-		   is_out ? "out" : "in ",
-		   is_out ?
-		   (chip->get
-		   ? (chip->get(chip, offset) ? "hi" : "lo")
-		   : "?  ")
-		   : (pull ? "pull up" : "pull down"),
-		   (mode < 0) ? "unknown" : modes[mode]);
+	seq_printf(s, " %s", (mode < 0) ? "unknown" : modes[mode]);
+
+out:
+	if (ret < 0)
+		dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
 }
 
 static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
@@ -594,6 +732,9 @@ static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
 		ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting);
 	}
 
+	if (ret < 0)
+		dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
+
 	return ret;
 }
 
@@ -642,10 +783,8 @@ static int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
 
 	ret = abx500_set_mode(pct->pctldev, &pct->chip,
 			      offset, p->altfunc);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(pct->dev, "%s setting altfunc failed\n", __func__);
-		return ret;
-	}
 
 	return ret;
 }
@@ -704,11 +843,193 @@ static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev,
 				 chip->base + offset - 1);
 }
 
+static void abx500_dt_free_map(struct pinctrl_dev *pctldev,
+		struct pinctrl_map *map, unsigned num_maps)
+{
+	int i;
+
+	for (i = 0; i < num_maps; i++)
+		if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+			kfree(map[i].data.configs.configs);
+	kfree(map);
+}
+
+static int abx500_dt_reserve_map(struct pinctrl_map **map,
+		unsigned *reserved_maps,
+		unsigned *num_maps,
+		unsigned reserve)
+{
+	unsigned old_num = *reserved_maps;
+	unsigned new_num = *num_maps + reserve;
+	struct pinctrl_map *new_map;
+
+	if (old_num >= new_num)
+		return 0;
+
+	new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL);
+	if (!new_map)
+		return -ENOMEM;
+
+	memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map));
+
+	*map = new_map;
+	*reserved_maps = new_num;
+
+	return 0;
+}
+
+static int abx500_dt_add_map_mux(struct pinctrl_map **map,
+		unsigned *reserved_maps,
+		unsigned *num_maps, const char *group,
+		const char *function)
+{
+	if (*num_maps == *reserved_maps)
+		return -ENOSPC;
+
+	(*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
+	(*map)[*num_maps].data.mux.group = group;
+	(*map)[*num_maps].data.mux.function = function;
+	(*num_maps)++;
+
+	return 0;
+}
+
+static int abx500_dt_add_map_configs(struct pinctrl_map **map,
+		unsigned *reserved_maps,
+		unsigned *num_maps, const char *group,
+		unsigned long *configs, unsigned num_configs)
+{
+	unsigned long *dup_configs;
+
+	if (*num_maps == *reserved_maps)
+		return -ENOSPC;
+
+	dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs),
+			      GFP_KERNEL);
+	if (!dup_configs)
+		return -ENOMEM;
+
+	(*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN;
+
+	(*map)[*num_maps].data.configs.group_or_pin = group;
+	(*map)[*num_maps].data.configs.configs = dup_configs;
+	(*map)[*num_maps].data.configs.num_configs = num_configs;
+	(*num_maps)++;
+
+	return 0;
+}
+
+static const char *abx500_find_pin_name(struct pinctrl_dev *pctldev,
+					const char *pin_name)
+{
+	int i, pin_number;
+	struct abx500_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+
+	if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1)
+		for (i = 0; i < npct->soc->npins; i++)
+			if (npct->soc->pins[i].number == pin_number)
+				return npct->soc->pins[i].name;
+	return NULL;
+}
+
+static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+		struct device_node *np,
+		struct pinctrl_map **map,
+		unsigned *reserved_maps,
+		unsigned *num_maps)
+{
+	int ret;
+	const char *function = NULL;
+	unsigned long *configs;
+	unsigned int nconfigs = 0;
+	bool has_config = 0;
+	unsigned reserve = 0;
+	struct property *prop;
+	const char *group, *gpio_name;
+	struct device_node *np_config;
+
+	ret = of_property_read_string(np, "ste,function", &function);
+	if (ret >= 0)
+		reserve = 1;
+
+	ret = pinconf_generic_parse_dt_config(np, &configs, &nconfigs);
+	if (nconfigs)
+		has_config = 1;
+
+	np_config = of_parse_phandle(np, "ste,config", 0);
+	if (np_config) {
+		ret = pinconf_generic_parse_dt_config(np_config, &configs,
+				&nconfigs);
+		if (ret)
+			goto exit;
+		has_config |= nconfigs;
+	}
+
+	ret = of_property_count_strings(np, "ste,pins");
+	if (ret < 0)
+		goto exit;
+
+	if (has_config)
+		reserve++;
+
+	reserve *= ret;
+
+	ret = abx500_dt_reserve_map(map, reserved_maps, num_maps, reserve);
+	if (ret < 0)
+		goto exit;
+
+	of_property_for_each_string(np, "ste,pins", prop, group) {
+		if (function) {
+			ret = abx500_dt_add_map_mux(map, reserved_maps,
+					num_maps, group, function);
+			if (ret < 0)
+				goto exit;
+		}
+		if (has_config) {
+			gpio_name = abx500_find_pin_name(pctldev, group);
+
+			ret = abx500_dt_add_map_configs(map, reserved_maps,
+					num_maps, gpio_name, configs, 1);
+			if (ret < 0)
+				goto exit;
+		}
+
+	}
+exit:
+	return ret;
+}
+
+static int abx500_dt_node_to_map(struct pinctrl_dev *pctldev,
+				 struct device_node *np_config,
+				 struct pinctrl_map **map, unsigned *num_maps)
+{
+	unsigned reserved_maps;
+	struct device_node *np;
+	int ret;
+
+	reserved_maps = 0;
+	*map = NULL;
+	*num_maps = 0;
+
+	for_each_child_of_node(np_config, np) {
+		ret = abx500_dt_subnode_to_map(pctldev, np, map,
+				&reserved_maps, num_maps);
+		if (ret < 0) {
+			abx500_dt_free_map(pctldev, *map, *num_maps);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static const struct pinctrl_ops abx500_pinctrl_ops = {
 	.get_groups_count = abx500_get_groups_cnt,
 	.get_group_name = abx500_get_group_name,
 	.get_group_pins = abx500_get_group_pins,
 	.pin_dbg_show = abx500_pin_dbg_show,
+	.dt_node_to_map = abx500_dt_node_to_map,
+	.dt_free_map = abx500_dt_free_map,
 };
 
 static int abx500_pin_config_get(struct pinctrl_dev *pctldev,
@@ -723,10 +1044,9 @@ static int abx500_pin_config_set(struct pinctrl_dev *pctldev,
 			  unsigned long config)
 {
 	struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
-	struct pullud *pullud = pct->soc->pullud;
 	struct gpio_chip *chip = &pct->chip;
 	unsigned offset;
-	int ret;
+	int ret = -EINVAL;
 	enum pin_config_param param = pinconf_to_config_param(config);
 	enum pin_config_param argument = pinconf_to_config_argument(config);
 
@@ -739,41 +1059,83 @@ static int abx500_pin_config_set(struct pinctrl_dev *pctldev,
 	offset = pin - 1;
 
 	switch (param) {
-	case PIN_CONFIG_BIAS_PULL_DOWN:
+	case PIN_CONFIG_BIAS_DISABLE:
+		ret = abx500_gpio_direction_input(chip, offset);
+		if (ret < 0)
+			goto out;
 		/*
-		 * if argument = 1 set the pull down
-		 * else clear the pull down
+		 * Some chips only support pull down, while some actually
+		 * support both pull up and pull down. Such chips have
+		 * a "pullud" range specified for the pins that support
+		 * both features. If the pin is not within that range, we
+		 * fall back to the old bit set that only support pull down.
 		 */
+		if (abx500_pullud_supported(chip, pin))
+			ret = abx500_set_pull_updown(pct,
+				pin,
+				ABX500_GPIO_PULL_NONE);
+		else
+			/* Chip only supports pull down */
+			ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG,
+				offset, ABX500_GPIO_PULL_NONE);
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
 		ret = abx500_gpio_direction_input(chip, offset);
+		if (ret < 0)
+			goto out;
 		/*
+		 * if argument = 1 set the pull down
+		 * else clear the pull down
 		 * Some chips only support pull down, while some actually
 		 * support both pull up and pull down. Such chips have
 		 * a "pullud" range specified for the pins that support
 		 * both features. If the pin is not within that range, we
 		 * fall back to the old bit set that only support pull down.
 		 */
-		if (pullud &&
-		    pin >= pullud->first_pin &&
-		    pin <= pullud->last_pin)
-			ret = abx500_config_pull_updown(pct,
+		if (abx500_pullud_supported(chip, pin))
+			ret = abx500_set_pull_updown(pct,
 				pin,
 				argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE);
 		else
 			/* Chip only supports pull down */
 			ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG,
-				offset, argument ? 0 : 1);
+				offset,
+				argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE);
+		break;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		ret = abx500_gpio_direction_input(chip, offset);
+		if (ret < 0)
+			goto out;
+		/*
+		 * if argument = 1 set the pull up
+		 * else clear the pull up
+		 */
+		ret = abx500_gpio_direction_input(chip, offset);
+		/*
+		 * Some chips only support pull down, while some actually
+		 * support both pull up and pull down. Such chips have
+		 * a "pullud" range specified for the pins that support
+		 * both features. If the pin is not within that range, do
+		 * nothing
+		 */
+		if (abx500_pullud_supported(chip, pin))
+			ret = abx500_set_pull_updown(pct,
+				pin,
+				argument ? ABX500_GPIO_PULL_UP : ABX500_GPIO_PULL_NONE);
 		break;
 
 	case PIN_CONFIG_OUTPUT:
 		ret = abx500_gpio_direction_output(chip, offset, argument);
-
 		break;
 
 	default:
 		dev_err(chip->dev, "illegal configuration requested\n");
-
-		return -EINVAL;
 	}
+out:
+	if (ret < 0)
+		dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
 
 	return ret;
 }
@@ -881,9 +1243,6 @@ static int abx500_gpio_probe(struct platform_device *pdev)
 			id = (unsigned long)match->data;
 	}
 
-	/* initialize the lock */
-	mutex_init(&pct->lock);
-
 	/* Poke in other ASIC variants here */
 	switch (id) {
 	case PINCTRL_AB8500:
@@ -900,13 +1259,11 @@ static int abx500_gpio_probe(struct platform_device *pdev)
 		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id);
-		mutex_destroy(&pct->lock);
 		return -EINVAL;
 	}
 
 	if (!pct->soc) {
 		dev_err(&pdev->dev, "Invalid SOC data\n");
-		mutex_destroy(&pct->lock);
 		return -EINVAL;
 	}
 
@@ -917,7 +1274,6 @@ static int abx500_gpio_probe(struct platform_device *pdev)
 	ret = gpiochip_add(&pct->chip);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
-		mutex_destroy(&pct->lock);
 		return ret;
 	}
 	dev_info(&pdev->dev, "added gpiochip\n");
@@ -954,7 +1310,6 @@ out_rem_chip:
 	if (err)
 		dev_info(&pdev->dev, "failed to remove gpiochip\n");
 
-	mutex_destroy(&pct->lock);
 	return ret;
 }
 
@@ -974,8 +1329,6 @@ static int abx500_gpio_remove(struct platform_device *pdev)
 		return ret;
 	}
 
-	mutex_destroy(&pct->lock);
-
 	return 0;
 }
 
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 5d7529ed539..b90a3a0ac53 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1543,12 +1543,6 @@ static int at91_gpio_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENOENT;
-		goto err;
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = irq;
@@ -1561,6 +1555,7 @@ static int at91_gpio_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	at91_chip->regbase = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(at91_chip->regbase)) {
 		ret = PTR_ERR(at91_chip->regbase);
diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c
new file mode 100644
index 00000000000..e9d735dcebf
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-baytrail.c
@@ -0,0 +1,543 @@
+/*
+ * Pinctrl GPIO driver for Intel Baytrail
+ * Copyright (c) 2012-2013, Intel Corporation.
+ *
+ * Author: Mathias Nyman <mathias.nyman@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/acpi.h>
+#include <linux/acpi_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/pinctrl.h>
+
+/* memory mapped register offsets */
+#define BYT_CONF0_REG		0x000
+#define BYT_CONF1_REG		0x004
+#define BYT_VAL_REG		0x008
+#define BYT_DFT_REG		0x00c
+#define BYT_INT_STAT_REG	0x800
+
+/* BYT_CONF0_REG register bits */
+#define BYT_TRIG_NEG		BIT(26)
+#define BYT_TRIG_POS		BIT(25)
+#define BYT_TRIG_LVL		BIT(24)
+#define BYT_PIN_MUX		0x07
+
+/* BYT_VAL_REG register bits */
+#define BYT_INPUT_EN		BIT(2)  /* 0: input enabled (active low)*/
+#define BYT_OUTPUT_EN		BIT(1)  /* 0: output enabled (active low)*/
+#define BYT_LEVEL		BIT(0)
+
+#define BYT_DIR_MASK		(BIT(1) | BIT(2))
+#define BYT_TRIG_MASK		(BIT(26) | BIT(25) | BIT(24))
+
+#define BYT_NGPIO_SCORE		102
+#define BYT_NGPIO_NCORE		28
+#define BYT_NGPIO_SUS		44
+
+/*
+ * Baytrail gpio controller consist of three separate sub-controllers called
+ * SCORE, NCORE and SUS. The sub-controllers are identified by their acpi UID.
+ *
+ * GPIO numbering is _not_ ordered meaning that gpio # 0 in ACPI namespace does
+ * _not_ correspond to the first gpio register at controller's gpio base.
+ * There is no logic or pattern in mapping gpio numbers to registers (pads) so
+ * each sub-controller needs to have its own mapping table
+ */
+
+/* score_pins[gpio_nr] = pad_nr */
+
+static unsigned const score_pins[BYT_NGPIO_SCORE] = {
+	85, 89, 93, 96, 99, 102, 98, 101, 34, 37,
+	36, 38, 39, 35, 40, 84, 62, 61, 64, 59,
+	54, 56, 60, 55, 63, 57, 51, 50, 53, 47,
+	52, 49, 48, 43, 46, 41, 45, 42, 58, 44,
+	95, 105, 70, 68, 67, 66, 69, 71, 65, 72,
+	86, 90, 88, 92, 103, 77, 79, 83, 78, 81,
+	80, 82, 13, 12, 15, 14, 17, 18, 19, 16,
+	2, 1, 0, 4, 6, 7, 9, 8, 33, 32,
+	31, 30, 29, 27, 25, 28, 26, 23, 21, 20,
+	24, 22, 5, 3, 10, 11, 106, 87, 91, 104,
+	97, 100,
+};
+
+static unsigned const ncore_pins[BYT_NGPIO_NCORE] = {
+	19, 18, 17, 20, 21, 22, 24, 25, 23, 16,
+	14, 15, 12, 26, 27, 1, 4, 8, 11, 0,
+	3, 6, 10, 13, 2, 5, 9, 7,
+};
+
+static unsigned const sus_pins[BYT_NGPIO_SUS] = {
+	29, 33, 30, 31, 32, 34, 36, 35, 38, 37,
+	18, 7, 11, 20, 17, 1, 8, 10, 19, 12,
+	0, 2, 23, 39, 28, 27, 22, 21, 24, 25,
+	26, 51, 56, 54, 49, 55, 48, 57, 50, 58,
+	52, 53, 59, 40,
+};
+
+static struct pinctrl_gpio_range byt_ranges[] = {
+	{
+		.name = "1", /* match with acpi _UID in probe */
+		.npins = BYT_NGPIO_SCORE,
+		.pins = score_pins,
+	},
+	{
+		.name = "2",
+		.npins = BYT_NGPIO_NCORE,
+		.pins = ncore_pins,
+	},
+	{
+		.name = "3",
+		.npins = BYT_NGPIO_SUS,
+		.pins = sus_pins,
+	},
+	{
+	},
+};
+
+struct byt_gpio {
+	struct gpio_chip		chip;
+	struct irq_domain		*domain;
+	struct platform_device		*pdev;
+	spinlock_t			lock;
+	void __iomem			*reg_base;
+	struct pinctrl_gpio_range	*range;
+};
+
+static void __iomem *byt_gpio_reg(struct gpio_chip *chip, unsigned offset,
+				 int reg)
+{
+	struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+	u32 reg_offset;
+	void __iomem *ptr;
+
+	if (reg == BYT_INT_STAT_REG)
+		reg_offset = (offset / 32) * 4;
+	else
+		reg_offset = vg->range->pins[offset] * 16;
+
+	ptr = (void __iomem *) (vg->reg_base + reg_offset + reg);
+	return ptr;
+}
+
+static int byt_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+
+	pm_runtime_get(&vg->pdev->dev);
+
+	return 0;
+}
+
+static void byt_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+	void __iomem *reg = byt_gpio_reg(&vg->chip, offset, BYT_CONF0_REG);
+	u32 value;
+
+	/* clear interrupt triggering */
+	value = readl(reg);
+	value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+	writel(value, reg);
+
+	pm_runtime_put(&vg->pdev->dev);
+}
+
+static int byt_irq_type(struct irq_data *d, unsigned type)
+{
+	struct byt_gpio *vg = irq_data_get_irq_chip_data(d);
+	u32 offset = irqd_to_hwirq(d);
+	u32 value;
+	unsigned long flags;
+	void __iomem *reg = byt_gpio_reg(&vg->chip, offset, BYT_CONF0_REG);
+
+	if (offset >= vg->chip.ngpio)
+		return -EINVAL;
+
+	spin_lock_irqsave(&vg->lock, flags);
+	value = readl(reg);
+
+	/* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
+	 * are used to indicate high and low level triggering
+	 */
+	value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		value |= BYT_TRIG_LVL;
+	case IRQ_TYPE_EDGE_RISING:
+		value |= BYT_TRIG_POS;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		value |= BYT_TRIG_LVL;
+	case IRQ_TYPE_EDGE_FALLING:
+		value |= BYT_TRIG_NEG;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		value |= (BYT_TRIG_NEG | BYT_TRIG_POS);
+		break;
+	}
+	writel(value, reg);
+
+	spin_unlock_irqrestore(&vg->lock, flags);
+
+	return 0;
+}
+
+static int byt_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
+	return readl(reg) & BYT_LEVEL;
+}
+
+static void byt_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+	void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
+	unsigned long flags;
+	u32 old_val;
+
+	spin_lock_irqsave(&vg->lock, flags);
+
+	old_val = readl(reg);
+
+	if (value)
+		writel(old_val | BYT_LEVEL, reg);
+	else
+		writel(old_val & ~BYT_LEVEL, reg);
+
+	spin_unlock_irqrestore(&vg->lock, flags);
+}
+
+static int byt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+	void __iomem *reg = byt_gpio_reg(chip, offset, BYT_VAL_REG);
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&vg->lock, flags);
+
+	value = readl(reg) | BYT_DIR_MASK;
+	value = value & (~BYT_INPUT_EN); /* active low */
+	writel(value, reg);
+
+	spin_unlock_irqrestore(&vg->lock, flags);
+
+	return 0;
+}
+
+static int byt_gpio_direction_output(struct gpio_chip *chip,
+				     unsigned gpio, int value)
+{
+	struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+	void __iomem *reg = byt_gpio_reg(chip, gpio, BYT_VAL_REG);
+	unsigned long flags;
+	u32 reg_val;
+
+	spin_lock_irqsave(&vg->lock, flags);
+
+	reg_val = readl(reg) | (BYT_DIR_MASK | !!value);
+	reg_val &= ~(BYT_OUTPUT_EN | !value);
+	writel(reg_val, reg);
+
+	spin_unlock_irqrestore(&vg->lock, flags);
+
+	return 0;
+}
+
+static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+	int i;
+	unsigned long flags;
+	u32 conf0, val, offs;
+
+	spin_lock_irqsave(&vg->lock, flags);
+
+	for (i = 0; i < vg->chip.ngpio; i++) {
+		offs = vg->range->pins[i] * 16;
+		conf0 = readl(vg->reg_base + offs + BYT_CONF0_REG);
+		val = readl(vg->reg_base + offs + BYT_VAL_REG);
+
+		seq_printf(s,
+			   " gpio-%-3d %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s\n",
+			   i,
+			   val & BYT_INPUT_EN ? "  " : "in",
+			   val & BYT_OUTPUT_EN ? "   " : "out",
+			   val & BYT_LEVEL ? "hi" : "lo",
+			   vg->range->pins[i], offs,
+			   conf0 & 0x7,
+			   conf0 & BYT_TRIG_NEG ? "fall " : "",
+			   conf0 & BYT_TRIG_POS ? "rise " : "",
+			   conf0 & BYT_TRIG_LVL ? "lvl " : "");
+	}
+	spin_unlock_irqrestore(&vg->lock, flags);
+}
+
+static int byt_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct byt_gpio *vg = container_of(chip, struct byt_gpio, chip);
+	return irq_create_mapping(vg->domain, offset);
+}
+
+static void byt_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct byt_gpio *vg = irq_data_get_irq_handler_data(data);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	u32 base, pin, mask;
+	void __iomem *reg;
+	u32 pending;
+	unsigned virq;
+	int looplimit = 0;
+
+	/* check from GPIO controller which pin triggered the interrupt */
+	for (base = 0; base < vg->chip.ngpio; base += 32) {
+
+		reg = byt_gpio_reg(&vg->chip, base, BYT_INT_STAT_REG);
+
+		while ((pending = readl(reg))) {
+			pin = __ffs(pending);
+			mask = BIT(pin);
+			/* Clear before handling so we can't lose an edge */
+			writel(mask, reg);
+
+			virq = irq_find_mapping(vg->domain, base + pin);
+			generic_handle_irq(virq);
+
+			/* In case bios or user sets triggering incorretly a pin
+			 * might remain in "interrupt triggered" state.
+			 */
+			if (looplimit++ > 32) {
+				dev_err(&vg->pdev->dev,
+					"Gpio %d interrupt flood, disabling\n",
+					base + pin);
+
+				reg = byt_gpio_reg(&vg->chip, base + pin,
+						   BYT_CONF0_REG);
+				mask = readl(reg);
+				mask &= ~(BYT_TRIG_NEG | BYT_TRIG_POS |
+					  BYT_TRIG_LVL);
+				writel(mask, reg);
+				mask = readl(reg); /* flush */
+				break;
+			}
+		}
+	}
+	chip->irq_eoi(data);
+}
+
+static void byt_irq_unmask(struct irq_data *d)
+{
+}
+
+static void byt_irq_mask(struct irq_data *d)
+{
+}
+
+static struct irq_chip byt_irqchip = {
+	.name = "BYT-GPIO",
+	.irq_mask = byt_irq_mask,
+	.irq_unmask = byt_irq_unmask,
+	.irq_set_type = byt_irq_type,
+};
+
+static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
+{
+	void __iomem *reg;
+	u32 base, value;
+
+	/* clear interrupt status trigger registers */
+	for (base = 0; base < vg->chip.ngpio; base += 32) {
+		reg = byt_gpio_reg(&vg->chip, base, BYT_INT_STAT_REG);
+		writel(0xffffffff, reg);
+		/* make sure trigger bits are cleared, if not then a pin
+		   might be misconfigured in bios */
+		value = readl(reg);
+		if (value)
+			dev_err(&vg->pdev->dev,
+				"GPIO interrupt error, pins misconfigured\n");
+	}
+}
+
+static int byt_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+			    irq_hw_number_t hw)
+{
+	struct byt_gpio *vg = d->host_data;
+
+	irq_set_chip_and_handler_name(virq, &byt_irqchip, handle_simple_irq,
+				      "demux");
+	irq_set_chip_data(virq, vg);
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static const struct irq_domain_ops byt_gpio_irq_ops = {
+	.map = byt_gpio_irq_map,
+};
+
+static int byt_gpio_probe(struct platform_device *pdev)
+{
+	struct byt_gpio *vg;
+	struct gpio_chip *gc;
+	struct resource *mem_rc, *irq_rc;
+	struct device *dev = &pdev->dev;
+	struct acpi_device *acpi_dev;
+	struct pinctrl_gpio_range *range;
+	acpi_handle handle = ACPI_HANDLE(dev);
+	unsigned hwirq;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &acpi_dev))
+		return -ENODEV;
+
+	vg = devm_kzalloc(dev, sizeof(struct byt_gpio), GFP_KERNEL);
+	if (!vg) {
+		dev_err(&pdev->dev, "can't allocate byt_gpio chip data\n");
+		return -ENOMEM;
+	}
+
+	for (range = byt_ranges; range->name; range++) {
+		if (!strcmp(acpi_dev->pnp.unique_id, range->name)) {
+			vg->chip.ngpio = range->npins;
+			vg->range = range;
+			break;
+		}
+	}
+
+	if (!vg->chip.ngpio || !vg->range)
+		return -ENODEV;
+
+	vg->pdev = pdev;
+	platform_set_drvdata(pdev, vg);
+
+	mem_rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	vg->reg_base = devm_ioremap_resource(dev, mem_rc);
+	if (IS_ERR(vg->reg_base))
+		return PTR_ERR(vg->reg_base);
+
+	spin_lock_init(&vg->lock);
+
+	gc = &vg->chip;
+	gc->label = dev_name(&pdev->dev);
+	gc->owner = THIS_MODULE;
+	gc->request = byt_gpio_request;
+	gc->free = byt_gpio_free;
+	gc->direction_input = byt_gpio_direction_input;
+	gc->direction_output = byt_gpio_direction_output;
+	gc->get = byt_gpio_get;
+	gc->set = byt_gpio_set;
+	gc->dbg_show = byt_gpio_dbg_show;
+	gc->base = -1;
+	gc->can_sleep = 0;
+	gc->dev = dev;
+
+	ret = gpiochip_add(gc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed adding byt-gpio chip\n");
+		return ret;
+	}
+
+	/* set up interrupts  */
+	irq_rc = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (irq_rc && irq_rc->start) {
+		hwirq = irq_rc->start;
+		gc->to_irq = byt_gpio_to_irq;
+
+		vg->domain = irq_domain_add_linear(NULL, gc->ngpio,
+						   &byt_gpio_irq_ops, vg);
+		if (!vg->domain)
+			return -ENXIO;
+
+		byt_gpio_irq_init_hw(vg);
+
+		irq_set_handler_data(hwirq, vg);
+		irq_set_chained_handler(hwirq, byt_gpio_irq_handler);
+
+		/* Register interrupt handlers for gpio signaled acpi events */
+		acpi_gpiochip_request_interrupts(gc);
+	}
+
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static int byt_gpio_runtime_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int byt_gpio_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+
+static const struct dev_pm_ops byt_gpio_pm_ops = {
+	.runtime_suspend = byt_gpio_runtime_suspend,
+	.runtime_resume = byt_gpio_runtime_resume,
+};
+
+static const struct acpi_device_id byt_gpio_acpi_match[] = {
+	{ "INT33B2", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, byt_gpio_acpi_match);
+
+static int byt_gpio_remove(struct platform_device *pdev)
+{
+	struct byt_gpio *vg = platform_get_drvdata(pdev);
+	int err;
+	pm_runtime_disable(&pdev->dev);
+	err = gpiochip_remove(&vg->chip);
+	if (err)
+		dev_warn(&pdev->dev, "failed to remove gpio_chip.\n");
+
+	return 0;
+}
+
+static struct platform_driver byt_gpio_driver = {
+	.probe          = byt_gpio_probe,
+	.remove         = byt_gpio_remove,
+	.driver         = {
+		.name   = "byt_gpio",
+		.owner  = THIS_MODULE,
+		.pm	= &byt_gpio_pm_ops,
+		.acpi_match_table = ACPI_PTR(byt_gpio_acpi_match),
+	},
+};
+
+static int __init byt_gpio_init(void)
+{
+	return platform_driver_register(&byt_gpio_driver);
+}
+
+subsys_initcall(byt_gpio_init);
diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c
index c8f20a3d8f8..a1c88b30f71 100644
--- a/drivers/pinctrl/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/pinctrl-bcm2835.c
@@ -113,7 +113,7 @@ static struct lock_class_key gpio_lock_class;
 
 /* pins are just named GPIO0..GPIO53 */
 #define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
-struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
+static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
 	BCM2835_GPIO_PIN(0),
 	BCM2835_GPIO_PIN(1),
 	BCM2835_GPIO_PIN(2),
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
index eeff7f7fc92..f22a2193d94 100644
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -853,7 +853,6 @@ static int __exit u300_gpio_remove(struct platform_device *pdev)
 	}
 	u300_gpio_free_ports(gpio);
 	clk_disable_unprepare(gpio->clk);
-	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
 
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 5f58cf0e96e..a74b3cbd745 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -50,37 +50,58 @@ static const struct of_device_id exynos_wkup_irq_ids[] = {
 	{ }
 };
 
-static void exynos_gpio_irq_unmask(struct irq_data *irqd)
+static void exynos_gpio_irq_mask(struct irq_data *irqd)
 {
 	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
 	struct samsung_pinctrl_drv_data *d = bank->drvdata;
 	unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
 	unsigned long mask;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->slock, flags);
 
 	mask = readl(d->virt_base + reg_mask);
-	mask &= ~(1 << irqd->hwirq);
+	mask |= 1 << irqd->hwirq;
 	writel(mask, d->virt_base + reg_mask);
+
+	spin_unlock_irqrestore(&bank->slock, flags);
 }
 
-static void exynos_gpio_irq_mask(struct irq_data *irqd)
+static void exynos_gpio_irq_ack(struct irq_data *irqd)
 {
 	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
 	struct samsung_pinctrl_drv_data *d = bank->drvdata;
-	unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
-	unsigned long mask;
+	unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset;
 
-	mask = readl(d->virt_base + reg_mask);
-	mask |= 1 << irqd->hwirq;
-	writel(mask, d->virt_base + reg_mask);
+	writel(1 << irqd->hwirq, d->virt_base + reg_pend);
 }
 
-static void exynos_gpio_irq_ack(struct irq_data *irqd)
+static void exynos_gpio_irq_unmask(struct irq_data *irqd)
 {
 	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
 	struct samsung_pinctrl_drv_data *d = bank->drvdata;
-	unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset;
+	unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
+	unsigned long mask;
+	unsigned long flags;
 
-	writel(1 << irqd->hwirq, d->virt_base + reg_pend);
+	/*
+	 * Ack level interrupts right before unmask
+	 *
+	 * If we don't do this we'll get a double-interrupt.  Level triggered
+	 * interrupts must not fire an interrupt if the level is not
+	 * _currently_ active, even if it was active while the interrupt was
+	 * masked.
+	 */
+	if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
+		exynos_gpio_irq_ack(irqd);
+
+	spin_lock_irqsave(&bank->slock, flags);
+
+	mask = readl(d->virt_base + reg_mask);
+	mask &= ~(1 << irqd->hwirq);
+	writel(mask, d->virt_base + reg_mask);
+
+	spin_unlock_irqrestore(&bank->slock, flags);
 }
 
 static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
@@ -258,37 +279,58 @@ err_domains:
 	return ret;
 }
 
-static void exynos_wkup_irq_unmask(struct irq_data *irqd)
+static void exynos_wkup_irq_mask(struct irq_data *irqd)
 {
 	struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
 	struct samsung_pinctrl_drv_data *d = b->drvdata;
 	unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
 	unsigned long mask;
+	unsigned long flags;
+
+	spin_lock_irqsave(&b->slock, flags);
 
 	mask = readl(d->virt_base + reg_mask);
-	mask &= ~(1 << irqd->hwirq);
+	mask |= 1 << irqd->hwirq;
 	writel(mask, d->virt_base + reg_mask);
+
+	spin_unlock_irqrestore(&b->slock, flags);
 }
 
-static void exynos_wkup_irq_mask(struct irq_data *irqd)
+static void exynos_wkup_irq_ack(struct irq_data *irqd)
 {
 	struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
 	struct samsung_pinctrl_drv_data *d = b->drvdata;
-	unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
-	unsigned long mask;
+	unsigned long pend = d->ctrl->weint_pend + b->eint_offset;
 
-	mask = readl(d->virt_base + reg_mask);
-	mask |= 1 << irqd->hwirq;
-	writel(mask, d->virt_base + reg_mask);
+	writel(1 << irqd->hwirq, d->virt_base + pend);
 }
 
-static void exynos_wkup_irq_ack(struct irq_data *irqd)
+static void exynos_wkup_irq_unmask(struct irq_data *irqd)
 {
 	struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
 	struct samsung_pinctrl_drv_data *d = b->drvdata;
-	unsigned long pend = d->ctrl->weint_pend + b->eint_offset;
+	unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
+	unsigned long mask;
+	unsigned long flags;
 
-	writel(1 << irqd->hwirq, d->virt_base + pend);
+	/*
+	 * Ack level interrupts right before unmask
+	 *
+	 * If we don't do this we'll get a double-interrupt.  Level triggered
+	 * interrupts must not fire an interrupt if the level is not
+	 * _currently_ active, even if it was active while the interrupt was
+	 * masked.
+	 */
+	if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
+		exynos_wkup_irq_ack(irqd);
+
+	spin_lock_irqsave(&b->slock, flags);
+
+	mask = readl(d->virt_base + reg_mask);
+	mask &= ~(1 << irqd->hwirq);
+	writel(mask, d->virt_base + reg_mask);
+
+	spin_unlock_irqrestore(&b->slock, flags);
 }
 
 static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
diff --git a/drivers/pinctrl/pinctrl-exynos5440.c b/drivers/pinctrl/pinctrl-exynos5440.c
index 32a48f44f57..3b283fd898f 100644
--- a/drivers/pinctrl/pinctrl-exynos5440.c
+++ b/drivers/pinctrl/pinctrl-exynos5440.c
@@ -220,7 +220,7 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
 		dev_err(dev, "failed to alloc memory for group name\n");
 		goto free_map;
 	}
-	sprintf(gname, "%s%s", np->name, GROUP_SUFFIX);
+	snprintf(gname, strlen(np->name) + 4, "%s%s", np->name, GROUP_SUFFIX);
 
 	/*
 	 * don't have config options? then skip over to creating function
@@ -259,7 +259,8 @@ skip_cfgs:
 			dev_err(dev, "failed to alloc memory for func name\n");
 			goto free_cfg;
 		}
-		sprintf(fname, "%s%s", np->name, FUNCTION_SUFFIX);
+		snprintf(fname, strlen(np->name) + 4, "%s%s", np->name,
+			 FUNCTION_SUFFIX);
 
 		map[*nmaps].data.mux.group = gname;
 		map[*nmaps].data.mux.function = fname;
@@ -713,7 +714,8 @@ static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev,
 			dev_err(dev, "failed to alloc memory for group name\n");
 			return -ENOMEM;
 		}
-		sprintf(gname, "%s%s", cfg_np->name, GROUP_SUFFIX);
+		snprintf(gname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
+			 GROUP_SUFFIX);
 
 		grp->name = gname;
 		grp->pins = pin_list;
@@ -733,7 +735,8 @@ skip_to_pin_function:
 			dev_err(dev, "failed to alloc memory for func name\n");
 			return -ENOMEM;
 		}
-		sprintf(fname, "%s%s", cfg_np->name, FUNCTION_SUFFIX);
+		snprintf(fname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
+			 FUNCTION_SUFFIX);
 
 		func->name = fname;
 		func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
@@ -806,7 +809,7 @@ static int exynos5440_pinctrl_register(struct platform_device *pdev,
 
 	/* for each pin, set the name of the pin */
 	for (pin = 0; pin < ctrldesc->npins; pin++) {
-		sprintf(pin_names, "gpio%02d", pin);
+		snprintf(pin_names, 6, "gpio%02d", pin);
 		pdesc = pindesc + pin;
 		pdesc->name = pin_names;
 		pin_names += PIN_NAME_LENGTH;
diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c
index 4fcfff9243b..57a4eb0add2 100644
--- a/drivers/pinctrl/pinctrl-imx.c
+++ b/drivers/pinctrl/pinctrl-imx.c
@@ -221,13 +221,21 @@ static int imx_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
 		pin_id = pins[i];
 		pin_reg = &info->pin_regs[pin_id];
 
-		if (!pin_reg->mux_reg) {
+		if (!(info->flags & ZERO_OFFSET_VALID) && !pin_reg->mux_reg) {
 			dev_err(ipctl->dev, "Pin(%s) does not support mux function\n",
 				info->pins[pin_id].name);
 			return -EINVAL;
 		}
 
-		writel(mux[i], ipctl->base + pin_reg->mux_reg);
+		if (info->flags & SHARE_MUX_CONF_REG) {
+			u32 reg;
+			reg = readl(ipctl->base + pin_reg->mux_reg);
+			reg &= ~(0x7 << 20);
+			reg |= (mux[i] << 20);
+			writel(reg, ipctl->base + pin_reg->mux_reg);
+		} else {
+			writel(mux[i], ipctl->base + pin_reg->mux_reg);
+		}
 		dev_dbg(ipctl->dev, "write: offset 0x%x val 0x%x\n",
 			pin_reg->mux_reg, mux[i]);
 
@@ -287,7 +295,7 @@ static int imx_pinconf_get(struct pinctrl_dev *pctldev,
 	const struct imx_pinctrl_soc_info *info = ipctl->info;
 	const struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id];
 
-	if (!pin_reg->conf_reg) {
+	if (!(info->flags & ZERO_OFFSET_VALID) && !pin_reg->conf_reg) {
 		dev_err(info->dev, "Pin(%s) does not support config function\n",
 			info->pins[pin_id].name);
 		return -EINVAL;
@@ -295,6 +303,9 @@ static int imx_pinconf_get(struct pinctrl_dev *pctldev,
 
 	*config = readl(ipctl->base + pin_reg->conf_reg);
 
+	if (info->flags & SHARE_MUX_CONF_REG)
+		*config &= 0xffff;
+
 	return 0;
 }
 
@@ -305,7 +316,7 @@ static int imx_pinconf_set(struct pinctrl_dev *pctldev,
 	const struct imx_pinctrl_soc_info *info = ipctl->info;
 	const struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id];
 
-	if (!pin_reg->conf_reg) {
+	if (!(info->flags & ZERO_OFFSET_VALID) && !pin_reg->conf_reg) {
 		dev_err(info->dev, "Pin(%s) does not support config function\n",
 			info->pins[pin_id].name);
 		return -EINVAL;
@@ -314,7 +325,15 @@ static int imx_pinconf_set(struct pinctrl_dev *pctldev,
 	dev_dbg(ipctl->dev, "pinconf set pin %s\n",
 		info->pins[pin_id].name);
 
-	writel(config, ipctl->base + pin_reg->conf_reg);
+	if (info->flags & SHARE_MUX_CONF_REG) {
+		u32 reg;
+		reg = readl(ipctl->base + pin_reg->conf_reg);
+		reg &= ~0xffff;
+		reg |= config;
+		writel(reg, ipctl->base + pin_reg->conf_reg);
+	} else {
+		writel(config, ipctl->base + pin_reg->conf_reg);
+	}
 	dev_dbg(ipctl->dev, "write: offset 0x%x val 0x%lx\n",
 		pin_reg->conf_reg, config);
 
@@ -381,19 +400,24 @@ static struct pinctrl_desc imx_pinctrl_desc = {
  * 1 u32 CONFIG, so 24 types in total for each pin.
  */
 #define FSL_PIN_SIZE 24
+#define SHARE_FSL_PIN_SIZE 20
 
 static int imx_pinctrl_parse_groups(struct device_node *np,
 				    struct imx_pin_group *grp,
 				    struct imx_pinctrl_soc_info *info,
 				    u32 index)
 {
-	int size;
+	int size, pin_size;
 	const __be32 *list;
 	int i;
 	u32 config;
 
 	dev_dbg(info->dev, "group(%d): %s\n", index, np->name);
 
+	if (info->flags & SHARE_MUX_CONF_REG)
+		pin_size = SHARE_FSL_PIN_SIZE;
+	else
+		pin_size = FSL_PIN_SIZE;
 	/* Initialise group */
 	grp->name = np->name;
 
@@ -403,12 +427,12 @@ static int imx_pinctrl_parse_groups(struct device_node *np,
 	 */
 	list = of_get_property(np, "fsl,pins", &size);
 	/* we do not check return since it's safe node passed down */
-	if (!size || size % FSL_PIN_SIZE) {
+	if (!size || size % pin_size) {
 		dev_err(info->dev, "Invalid fsl,pins property\n");
 		return -EINVAL;
 	}
 
-	grp->npins = size / FSL_PIN_SIZE;
+	grp->npins = size / pin_size;
 	grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
 				GFP_KERNEL);
 	grp->mux_mode = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
@@ -421,10 +445,17 @@ static int imx_pinctrl_parse_groups(struct device_node *np,
 				GFP_KERNEL);
 	for (i = 0; i < grp->npins; i++) {
 		u32 mux_reg = be32_to_cpu(*list++);
-		u32 conf_reg = be32_to_cpu(*list++);
-		unsigned int pin_id = mux_reg ? mux_reg / 4 : conf_reg / 4;
-		struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id];
+		u32 conf_reg;
+		unsigned int pin_id;
+		struct imx_pin_reg *pin_reg;
 
+		if (info->flags & SHARE_MUX_CONF_REG)
+			conf_reg = mux_reg;
+		else
+			conf_reg = be32_to_cpu(*list++);
+
+		pin_id = mux_reg ? mux_reg / 4 : conf_reg / 4;
+		pin_reg = &info->pin_regs[pin_id];
 		grp->pins[i] = pin_id;
 		pin_reg->mux_reg = mux_reg;
 		pin_reg->conf_reg = conf_reg;
diff --git a/drivers/pinctrl/pinctrl-imx.h b/drivers/pinctrl/pinctrl-imx.h
index 607ef549755..bcedd991c9f 100644
--- a/drivers/pinctrl/pinctrl-imx.h
+++ b/drivers/pinctrl/pinctrl-imx.h
@@ -74,8 +74,12 @@ struct imx_pinctrl_soc_info {
 	unsigned int ngroups;
 	struct imx_pmx_func *functions;
 	unsigned int nfunctions;
+	unsigned int flags;
 };
 
+#define ZERO_OFFSET_VALID	0x1
+#define SHARE_MUX_CONF_REG	0x2
+
 #define NO_MUX		0x0
 #define NO_PAD		0x0
 
diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c
index b45c4eb3579..f5d56436ba7 100644
--- a/drivers/pinctrl/pinctrl-mxs.c
+++ b/drivers/pinctrl/pinctrl-mxs.c
@@ -515,7 +515,6 @@ int mxs_pinctrl_probe(struct platform_device *pdev,
 	return 0;
 
 err:
-	platform_set_drvdata(pdev, NULL);
 	iounmap(d->base);
 	return ret;
 }
@@ -525,7 +524,6 @@ int mxs_pinctrl_remove(struct platform_device *pdev)
 {
 	struct mxs_pinctrl_data *d = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	pinctrl_unregister(d->pctl);
 	iounmap(d->base);
 
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 8a4f9c5c0b8..4a1cfdce223 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -1309,7 +1309,7 @@ static int nmk_gpio_irq_map(struct irq_domain *d, unsigned int irq,
 	return 0;
 }
 
-const struct irq_domain_ops nmk_gpio_irq_simple_ops = {
+static const struct irq_domain_ops nmk_gpio_irq_simple_ops = {
 	.map = nmk_gpio_irq_map,
 	.xlate = irq_domain_xlate_twocell,
 };
@@ -1681,7 +1681,7 @@ static bool nmk_pinctrl_dt_get_config(struct device_node *np,
 	return has_config;
 }
 
-int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		struct device_node *np,
 		struct pinctrl_map **map,
 		unsigned *reserved_maps,
@@ -1740,7 +1740,7 @@ exit:
 	return ret;
 }
 
-int nmk_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+static int nmk_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
 				 struct device_node *np_config,
 				 struct pinctrl_map **map, unsigned *num_maps)
 {
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
new file mode 100644
index 00000000000..1eb5a2e43b0
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -0,0 +1,1394 @@
+/*
+ * Pinctrl driver for Rockchip SoCs
+ *
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * With some ideas taken from pinctrl-samsung:
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ *		http://www.linaro.org
+ *
+ * and pinctrl-at91:
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/clk-provider.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "core.h"
+#include "pinconf.h"
+
+/* GPIO control registers */
+#define GPIO_SWPORT_DR		0x00
+#define GPIO_SWPORT_DDR		0x04
+#define GPIO_INTEN		0x30
+#define GPIO_INTMASK		0x34
+#define GPIO_INTTYPE_LEVEL	0x38
+#define GPIO_INT_POLARITY	0x3c
+#define GPIO_INT_STATUS		0x40
+#define GPIO_INT_RAWSTATUS	0x44
+#define GPIO_DEBOUNCE		0x48
+#define GPIO_PORTS_EOI		0x4c
+#define GPIO_EXT_PORT		0x50
+#define GPIO_LS_SYNC		0x60
+
+/**
+ * @reg_base: register base of the gpio bank
+ * @clk: clock of the gpio bank
+ * @irq: interrupt of the gpio bank
+ * @pin_base: first pin number
+ * @nr_pins: number of pins in this bank
+ * @name: name of the bank
+ * @bank_num: number of the bank, to account for holes
+ * @valid: are all necessary informations present
+ * @of_node: dt node of this bank
+ * @drvdata: common pinctrl basedata
+ * @domain: irqdomain of the gpio bank
+ * @gpio_chip: gpiolib chip
+ * @grange: gpio range
+ * @slock: spinlock for the gpio bank
+ */
+struct rockchip_pin_bank {
+	void __iomem			*reg_base;
+	struct clk			*clk;
+	int				irq;
+	u32				pin_base;
+	u8				nr_pins;
+	char				*name;
+	u8				bank_num;
+	bool				valid;
+	struct device_node		*of_node;
+	struct rockchip_pinctrl		*drvdata;
+	struct irq_domain		*domain;
+	struct gpio_chip		gpio_chip;
+	struct pinctrl_gpio_range	grange;
+	spinlock_t			slock;
+
+};
+
+#define PIN_BANK(id, pins, label)			\
+	{						\
+		.bank_num	= id,			\
+		.nr_pins	= pins,			\
+		.name		= label,		\
+	}
+
+/**
+ * @pull_auto: some SoCs don't allow pulls to be specified as up or down, but
+ *	       instead decide this automatically based on the pad-type.
+ */
+struct rockchip_pin_ctrl {
+	struct rockchip_pin_bank	*pin_banks;
+	u32				nr_banks;
+	u32				nr_pins;
+	char				*label;
+	int				mux_offset;
+	int				pull_offset;
+	bool				pull_auto;
+	int				pull_bank_stride;
+};
+
+struct rockchip_pin_config {
+	unsigned int		func;
+	unsigned long		*configs;
+	unsigned int		nconfigs;
+};
+
+/**
+ * struct rockchip_pin_group: represent group of pins of a pinmux function.
+ * @name: name of the pin group, used to lookup the group.
+ * @pins: the pins included in this group.
+ * @npins: number of pins included in this group.
+ * @func: the mux function number to be programmed when selected.
+ * @configs: the config values to be set for each pin
+ * @nconfigs: number of configs for each pin
+ */
+struct rockchip_pin_group {
+	const char			*name;
+	unsigned int			npins;
+	unsigned int			*pins;
+	struct rockchip_pin_config	*data;
+};
+
+/**
+ * struct rockchip_pmx_func: represent a pin function.
+ * @name: name of the pin function, used to lookup the function.
+ * @groups: one or more names of pin groups that provide this function.
+ * @num_groups: number of groups included in @groups.
+ */
+struct rockchip_pmx_func {
+	const char		*name;
+	const char		**groups;
+	u8			ngroups;
+};
+
+struct rockchip_pinctrl {
+	void __iomem			*reg_base;
+	struct device			*dev;
+	struct rockchip_pin_ctrl	*ctrl;
+	struct pinctrl_desc		pctl;
+	struct pinctrl_dev		*pctl_dev;
+	struct rockchip_pin_group	*groups;
+	unsigned int			ngroups;
+	struct rockchip_pmx_func	*functions;
+	unsigned int			nfunctions;
+};
+
+static inline struct rockchip_pin_bank *gc_to_pin_bank(struct gpio_chip *gc)
+{
+	return container_of(gc, struct rockchip_pin_bank, gpio_chip);
+}
+
+static const inline struct rockchip_pin_group *pinctrl_name_to_group(
+					const struct rockchip_pinctrl *info,
+					const char *name)
+{
+	const struct rockchip_pin_group *grp = NULL;
+	int i;
+
+	for (i = 0; i < info->ngroups; i++) {
+		if (strcmp(info->groups[i].name, name))
+			continue;
+
+		grp = &info->groups[i];
+		break;
+	}
+
+	return grp;
+}
+
+/*
+ * given a pin number that is local to a pin controller, find out the pin bank
+ * and the register base of the pin bank.
+ */
+static struct rockchip_pin_bank *pin_to_bank(struct rockchip_pinctrl *info,
+								unsigned pin)
+{
+	struct rockchip_pin_bank *b = info->ctrl->pin_banks;
+
+	while ((pin >= b->pin_base) &&
+			((b->pin_base + b->nr_pins - 1) < pin))
+		b++;
+
+	return b;
+}
+
+static struct rockchip_pin_bank *bank_num_to_bank(
+					struct rockchip_pinctrl *info,
+					unsigned num)
+{
+	struct rockchip_pin_bank *b = info->ctrl->pin_banks;
+	int i;
+
+	for (i = 0; i < info->ctrl->nr_banks; i++) {
+		if (b->bank_num == num)
+			break;
+
+		b++;
+	}
+
+	if (b->bank_num != num)
+		return ERR_PTR(-EINVAL);
+
+	return b;
+}
+
+/*
+ * Pinctrl_ops handling
+ */
+
+static int rockchip_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->ngroups;
+}
+
+static const char *rockchip_get_group_name(struct pinctrl_dev *pctldev,
+							unsigned selector)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->groups[selector].name;
+}
+
+static int rockchip_get_group_pins(struct pinctrl_dev *pctldev,
+				      unsigned selector, const unsigned **pins,
+				      unsigned *npins)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	if (selector >= info->ngroups)
+		return -EINVAL;
+
+	*pins = info->groups[selector].pins;
+	*npins = info->groups[selector].npins;
+
+	return 0;
+}
+
+static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev,
+				 struct device_node *np,
+				 struct pinctrl_map **map, unsigned *num_maps)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const struct rockchip_pin_group *grp;
+	struct pinctrl_map *new_map;
+	struct device_node *parent;
+	int map_num = 1;
+	int i;
+
+	/*
+	 * first find the group of this node and check if we need to create
+	 * config maps for pins
+	 */
+	grp = pinctrl_name_to_group(info, np->name);
+	if (!grp) {
+		dev_err(info->dev, "unable to find group for node %s\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	map_num += grp->npins;
+	new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num,
+								GFP_KERNEL);
+	if (!new_map)
+		return -ENOMEM;
+
+	*map = new_map;
+	*num_maps = map_num;
+
+	/* create mux map */
+	parent = of_get_parent(np);
+	if (!parent) {
+		devm_kfree(pctldev->dev, new_map);
+		return -EINVAL;
+	}
+	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
+	new_map[0].data.mux.function = parent->name;
+	new_map[0].data.mux.group = np->name;
+	of_node_put(parent);
+
+	/* create config map */
+	new_map++;
+	for (i = 0; i < grp->npins; i++) {
+		new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
+		new_map[i].data.configs.group_or_pin =
+				pin_get_name(pctldev, grp->pins[i]);
+		new_map[i].data.configs.configs = grp->data[i].configs;
+		new_map[i].data.configs.num_configs = grp->data[i].nconfigs;
+	}
+
+	dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
+		(*map)->data.mux.function, (*map)->data.mux.group, map_num);
+
+	return 0;
+}
+
+static void rockchip_dt_free_map(struct pinctrl_dev *pctldev,
+				    struct pinctrl_map *map, unsigned num_maps)
+{
+}
+
+static const struct pinctrl_ops rockchip_pctrl_ops = {
+	.get_groups_count	= rockchip_get_groups_count,
+	.get_group_name		= rockchip_get_group_name,
+	.get_group_pins		= rockchip_get_group_pins,
+	.dt_node_to_map		= rockchip_dt_node_to_map,
+	.dt_free_map		= rockchip_dt_free_map,
+};
+
+/*
+ * Hardware access
+ */
+
+/*
+ * Set a new mux function for a pin.
+ *
+ * The register is divided into the upper and lower 16 bit. When changing
+ * a value, the previous register value is not read and changed. Instead
+ * it seems the changed bits are marked in the upper 16 bit, while the
+ * changed value gets set in the same offset in the lower 16 bit.
+ * All pin settings seem to be 2 bit wide in both the upper and lower
+ * parts.
+ * @bank: pin bank to change
+ * @pin: pin to change
+ * @mux: new mux function to set
+ */
+static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
+{
+	struct rockchip_pinctrl *info = bank->drvdata;
+	void __iomem *reg = info->reg_base + info->ctrl->mux_offset;
+	unsigned long flags;
+	u8 bit;
+	u32 data;
+
+	dev_dbg(info->dev, "setting mux of GPIO%d-%d to %d\n",
+						bank->bank_num, pin, mux);
+
+	/* get basic quadrupel of mux registers and the correct reg inside */
+	reg += bank->bank_num * 0x10;
+	reg += (pin / 8) * 4;
+	bit = (pin % 8) * 2;
+
+	spin_lock_irqsave(&bank->slock, flags);
+
+	data = (3 << (bit + 16));
+	data |= (mux & 3) << bit;
+	writel(data, reg);
+
+	spin_unlock_irqrestore(&bank->slock, flags);
+}
+
+static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
+{
+	struct rockchip_pinctrl *info = bank->drvdata;
+	struct rockchip_pin_ctrl *ctrl = info->ctrl;
+	void __iomem *reg;
+	u8 bit;
+
+	/* rk3066b does support any pulls */
+	if (!ctrl->pull_offset)
+		return PIN_CONFIG_BIAS_DISABLE;
+
+	reg = info->reg_base + ctrl->pull_offset;
+
+	if (ctrl->pull_auto) {
+		reg += bank->bank_num * ctrl->pull_bank_stride;
+		reg += (pin_num / 16) * 4;
+		bit = pin_num % 16;
+
+		return !(readl_relaxed(reg) & BIT(bit))
+				? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
+				: PIN_CONFIG_BIAS_DISABLE;
+	} else {
+		dev_err(info->dev, "pull support for rk31xx not implemented\n");
+		return -EIO;
+	}
+}
+
+static int rockchip_set_pull(struct rockchip_pin_bank *bank,
+					int pin_num, int pull)
+{
+	struct rockchip_pinctrl *info = bank->drvdata;
+	struct rockchip_pin_ctrl *ctrl = info->ctrl;
+	void __iomem *reg;
+	unsigned long flags;
+	u8 bit;
+	u32 data;
+
+	dev_dbg(info->dev, "setting pull of GPIO%d-%d to %d\n",
+		 bank->bank_num, pin_num, pull);
+
+	/* rk3066b does support any pulls */
+	if (!ctrl->pull_offset)
+		return pull ? -EINVAL : 0;
+
+	reg = info->reg_base + ctrl->pull_offset;
+
+	if (ctrl->pull_auto) {
+		if (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT &&
+					pull != PIN_CONFIG_BIAS_DISABLE) {
+			dev_err(info->dev, "only PIN_DEFAULT and DISABLE allowed\n");
+			return -EINVAL;
+		}
+
+		reg += bank->bank_num * ctrl->pull_bank_stride;
+		reg += (pin_num / 16) * 4;
+		bit = pin_num % 16;
+
+		spin_lock_irqsave(&bank->slock, flags);
+
+		data = BIT(bit + 16);
+		if (pull == PIN_CONFIG_BIAS_DISABLE)
+			data |= BIT(bit);
+		writel(data, reg);
+
+		spin_unlock_irqrestore(&bank->slock, flags);
+	} else {
+		if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT) {
+			dev_err(info->dev, "pull direction (up/down) needs to be specified\n");
+			return -EINVAL;
+		}
+
+		dev_err(info->dev, "pull support for rk31xx not implemented\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * Pinmux_ops handling
+ */
+
+static int rockchip_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->nfunctions;
+}
+
+static const char *rockchip_pmx_get_func_name(struct pinctrl_dev *pctldev,
+					  unsigned selector)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->functions[selector].name;
+}
+
+static int rockchip_pmx_get_groups(struct pinctrl_dev *pctldev,
+				unsigned selector, const char * const **groups,
+				unsigned * const num_groups)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = info->functions[selector].groups;
+	*num_groups = info->functions[selector].ngroups;
+
+	return 0;
+}
+
+static int rockchip_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
+							    unsigned group)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const unsigned int *pins = info->groups[group].pins;
+	const struct rockchip_pin_config *data = info->groups[group].data;
+	struct rockchip_pin_bank *bank;
+	int cnt;
+
+	dev_dbg(info->dev, "enable function %s group %s\n",
+		info->functions[selector].name, info->groups[group].name);
+
+	/*
+	 * for each pin in the pin group selected, program the correspoding pin
+	 * pin function number in the config register.
+	 */
+	for (cnt = 0; cnt < info->groups[group].npins; cnt++) {
+		bank = pin_to_bank(info, pins[cnt]);
+		rockchip_set_mux(bank, pins[cnt] - bank->pin_base,
+				 data[cnt].func);
+	}
+
+	return 0;
+}
+
+static void rockchip_pmx_disable(struct pinctrl_dev *pctldev,
+					unsigned selector, unsigned group)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const unsigned int *pins = info->groups[group].pins;
+	struct rockchip_pin_bank *bank;
+	int cnt;
+
+	dev_dbg(info->dev, "disable function %s group %s\n",
+		info->functions[selector].name, info->groups[group].name);
+
+	for (cnt = 0; cnt < info->groups[group].npins; cnt++) {
+		bank = pin_to_bank(info, pins[cnt]);
+		rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0);
+	}
+}
+
+/*
+ * The calls to gpio_direction_output() and gpio_direction_input()
+ * leads to this function call (via the pinctrl_gpio_direction_{input|output}()
+ * function called from the gpiolib interface).
+ */
+static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+					      struct pinctrl_gpio_range *range,
+					      unsigned offset, bool input)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	struct rockchip_pin_bank *bank;
+	struct gpio_chip *chip;
+	int pin;
+	u32 data;
+
+	chip = range->gc;
+	bank = gc_to_pin_bank(chip);
+	pin = offset - chip->base;
+
+	dev_dbg(info->dev, "gpio_direction for pin %u as %s-%d to %s\n",
+		 offset, range->name, pin, input ? "input" : "output");
+
+	rockchip_set_mux(bank, pin, RK_FUNC_GPIO);
+
+	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+	/* set bit to 1 for output, 0 for input */
+	if (!input)
+		data |= BIT(pin);
+	else
+		data &= ~BIT(pin);
+	writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
+
+	return 0;
+}
+
+static const struct pinmux_ops rockchip_pmx_ops = {
+	.get_functions_count	= rockchip_pmx_get_funcs_count,
+	.get_function_name	= rockchip_pmx_get_func_name,
+	.get_function_groups	= rockchip_pmx_get_groups,
+	.enable			= rockchip_pmx_enable,
+	.disable		= rockchip_pmx_disable,
+	.gpio_set_direction	= rockchip_pmx_gpio_set_direction,
+};
+
+/*
+ * Pinconf_ops handling
+ */
+
+static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
+					enum pin_config_param pull)
+{
+	/* rk3066b does support any pulls */
+	if (!ctrl->pull_offset)
+		return pull ? false : true;
+
+	if (ctrl->pull_auto) {
+		if (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT &&
+					pull != PIN_CONFIG_BIAS_DISABLE)
+			return false;
+	} else {
+		if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
+			return false;
+	}
+
+	return true;
+}
+
+/* set the pin config settings for a specified pin */
+static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+							unsigned long config)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	struct rockchip_pin_bank *bank = pin_to_bank(info, pin);
+	enum pin_config_param param = pinconf_to_config_param(config);
+	u16 arg = pinconf_to_config_argument(config);
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		return rockchip_set_pull(bank, pin - bank->pin_base, param);
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+	case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
+		if (!rockchip_pinconf_pull_valid(info->ctrl, param))
+			return -ENOTSUPP;
+
+		if (!arg)
+			return -EINVAL;
+
+		return rockchip_set_pull(bank, pin - bank->pin_base, param);
+		break;
+	default:
+		return -ENOTSUPP;
+		break;
+	}
+
+	return 0;
+}
+
+/* get the pin config settings for a specified pin */
+static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
+							unsigned long *config)
+{
+	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	struct rockchip_pin_bank *bank = pin_to_bank(info, pin);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		if (rockchip_get_pull(bank, pin - bank->pin_base) != param)
+			return -EINVAL;
+
+		*config = 0;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+	case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
+		if (!rockchip_pinconf_pull_valid(info->ctrl, param))
+			return -ENOTSUPP;
+
+		if (rockchip_get_pull(bank, pin - bank->pin_base) != param)
+			return -EINVAL;
+
+		*config = 1;
+		break;
+	default:
+		return -ENOTSUPP;
+		break;
+	}
+
+	return 0;
+}
+
+static const struct pinconf_ops rockchip_pinconf_ops = {
+	.pin_config_get			= rockchip_pinconf_get,
+	.pin_config_set			= rockchip_pinconf_set,
+};
+
+static const char *gpio_compat = "rockchip,gpio-bank";
+
+static void rockchip_pinctrl_child_count(struct rockchip_pinctrl *info,
+						struct device_node *np)
+{
+	struct device_node *child;
+
+	for_each_child_of_node(np, child) {
+		if (of_device_is_compatible(child, gpio_compat))
+			continue;
+
+		info->nfunctions++;
+		info->ngroups += of_get_child_count(child);
+	}
+}
+
+static int rockchip_pinctrl_parse_groups(struct device_node *np,
+					      struct rockchip_pin_group *grp,
+					      struct rockchip_pinctrl *info,
+					      u32 index)
+{
+	struct rockchip_pin_bank *bank;
+	int size;
+	const __be32 *list;
+	int num;
+	int i, j;
+	int ret;
+
+	dev_dbg(info->dev, "group(%d): %s\n", index, np->name);
+
+	/* Initialise group */
+	grp->name = np->name;
+
+	/*
+	 * the binding format is rockchip,pins = <bank pin mux CONFIG>,
+	 * do sanity check and calculate pins number
+	 */
+	list = of_get_property(np, "rockchip,pins", &size);
+	/* we do not check return since it's safe node passed down */
+	size /= sizeof(*list);
+	if (!size || size % 4) {
+		dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n");
+		return -EINVAL;
+	}
+
+	grp->npins = size / 4;
+
+	grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
+						GFP_KERNEL);
+	grp->data = devm_kzalloc(info->dev, grp->npins *
+					  sizeof(struct rockchip_pin_config),
+					GFP_KERNEL);
+	if (!grp->pins || !grp->data)
+		return -ENOMEM;
+
+	for (i = 0, j = 0; i < size; i += 4, j++) {
+		const __be32 *phandle;
+		struct device_node *np_config;
+
+		num = be32_to_cpu(*list++);
+		bank = bank_num_to_bank(info, num);
+		if (IS_ERR(bank))
+			return PTR_ERR(bank);
+
+		grp->pins[j] = bank->pin_base + be32_to_cpu(*list++);
+		grp->data[j].func = be32_to_cpu(*list++);
+
+		phandle = list++;
+		if (!phandle)
+			return -EINVAL;
+
+		np_config = of_find_node_by_phandle(be32_to_cpup(phandle));
+		ret = pinconf_generic_parse_dt_config(np_config,
+				&grp->data[j].configs, &grp->data[j].nconfigs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_pinctrl_parse_functions(struct device_node *np,
+						struct rockchip_pinctrl *info,
+						u32 index)
+{
+	struct device_node *child;
+	struct rockchip_pmx_func *func;
+	struct rockchip_pin_group *grp;
+	int ret;
+	static u32 grp_index;
+	u32 i = 0;
+
+	dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name);
+
+	func = &info->functions[index];
+
+	/* Initialise function */
+	func->name = np->name;
+	func->ngroups = of_get_child_count(np);
+	if (func->ngroups <= 0)
+		return 0;
+
+	func->groups = devm_kzalloc(info->dev,
+			func->ngroups * sizeof(char *), GFP_KERNEL);
+	if (!func->groups)
+		return -ENOMEM;
+
+	for_each_child_of_node(np, child) {
+		func->groups[i] = child->name;
+		grp = &info->groups[grp_index++];
+		ret = rockchip_pinctrl_parse_groups(child, grp, info, i++);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_pinctrl_parse_dt(struct platform_device *pdev,
+					      struct rockchip_pinctrl *info)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	int ret;
+	int i;
+
+	rockchip_pinctrl_child_count(info, np);
+
+	dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
+	dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
+
+	info->functions = devm_kzalloc(dev, info->nfunctions *
+					      sizeof(struct rockchip_pmx_func),
+					      GFP_KERNEL);
+	if (!info->functions) {
+		dev_err(dev, "failed to allocate memory for function list\n");
+		return -EINVAL;
+	}
+
+	info->groups = devm_kzalloc(dev, info->ngroups *
+					    sizeof(struct rockchip_pin_group),
+					    GFP_KERNEL);
+	if (!info->groups) {
+		dev_err(dev, "failed allocate memory for ping group list\n");
+		return -EINVAL;
+	}
+
+	i = 0;
+
+	for_each_child_of_node(np, child) {
+		if (of_device_is_compatible(child, gpio_compat))
+			continue;
+		ret = rockchip_pinctrl_parse_functions(child, info, i++);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to parse function\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int rockchip_pinctrl_register(struct platform_device *pdev,
+					struct rockchip_pinctrl *info)
+{
+	struct pinctrl_desc *ctrldesc = &info->pctl;
+	struct pinctrl_pin_desc *pindesc, *pdesc;
+	struct rockchip_pin_bank *pin_bank;
+	int pin, bank, ret;
+	int k;
+
+	ctrldesc->name = "rockchip-pinctrl";
+	ctrldesc->owner = THIS_MODULE;
+	ctrldesc->pctlops = &rockchip_pctrl_ops;
+	ctrldesc->pmxops = &rockchip_pmx_ops;
+	ctrldesc->confops = &rockchip_pinconf_ops;
+
+	pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
+			info->ctrl->nr_pins, GFP_KERNEL);
+	if (!pindesc) {
+		dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n");
+		return -ENOMEM;
+	}
+	ctrldesc->pins = pindesc;
+	ctrldesc->npins = info->ctrl->nr_pins;
+
+	pdesc = pindesc;
+	for (bank = 0 , k = 0; bank < info->ctrl->nr_banks; bank++) {
+		pin_bank = &info->ctrl->pin_banks[bank];
+		for (pin = 0; pin < pin_bank->nr_pins; pin++, k++) {
+			pdesc->number = k;
+			pdesc->name = kasprintf(GFP_KERNEL, "%s-%d",
+						pin_bank->name, pin);
+			pdesc++;
+		}
+	}
+
+	info->pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, info);
+	if (!info->pctl_dev) {
+		dev_err(&pdev->dev, "could not register pinctrl driver\n");
+		return -EINVAL;
+	}
+
+	for (bank = 0; bank < info->ctrl->nr_banks; ++bank) {
+		pin_bank = &info->ctrl->pin_banks[bank];
+		pin_bank->grange.name = pin_bank->name;
+		pin_bank->grange.id = bank;
+		pin_bank->grange.pin_base = pin_bank->pin_base;
+		pin_bank->grange.base = pin_bank->gpio_chip.base;
+		pin_bank->grange.npins = pin_bank->gpio_chip.ngpio;
+		pin_bank->grange.gc = &pin_bank->gpio_chip;
+		pinctrl_add_gpio_range(info->pctl_dev, &pin_bank->grange);
+	}
+
+	ret = rockchip_pinctrl_parse_dt(pdev, info);
+	if (ret) {
+		pinctrl_unregister(info->pctl_dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * GPIO handling
+ */
+
+static void rockchip_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct rockchip_pin_bank *bank = gc_to_pin_bank(gc);
+	void __iomem *reg = bank->reg_base + GPIO_SWPORT_DR;
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&bank->slock, flags);
+
+	data = readl(reg);
+	data &= ~BIT(offset);
+	if (value)
+		data |= BIT(offset);
+	writel(data, reg);
+
+	spin_unlock_irqrestore(&bank->slock, flags);
+}
+
+/*
+ * Returns the level of the pin for input direction and setting of the DR
+ * register for output gpios.
+ */
+static int rockchip_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct rockchip_pin_bank *bank = gc_to_pin_bank(gc);
+	u32 data;
+
+	data = readl(bank->reg_base + GPIO_EXT_PORT);
+	data >>= offset;
+	data &= 1;
+	return data;
+}
+
+/*
+ * gpiolib gpio_direction_input callback function. The setting of the pin
+ * mux function as 'gpio input' will be handled by the pinctrl susbsystem
+ * interface.
+ */
+static int rockchip_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	return pinctrl_gpio_direction_input(gc->base + offset);
+}
+
+/*
+ * gpiolib gpio_direction_output callback function. The setting of the pin
+ * mux function as 'gpio output' will be handled by the pinctrl susbsystem
+ * interface.
+ */
+static int rockchip_gpio_direction_output(struct gpio_chip *gc,
+					  unsigned offset, int value)
+{
+	rockchip_gpio_set(gc, offset, value);
+	return pinctrl_gpio_direction_output(gc->base + offset);
+}
+
+/*
+ * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin
+ * and a virtual IRQ, if not already present.
+ */
+static int rockchip_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct rockchip_pin_bank *bank = gc_to_pin_bank(gc);
+	unsigned int virq;
+
+	if (!bank->domain)
+		return -ENXIO;
+
+	virq = irq_create_mapping(bank->domain, offset);
+
+	return (virq) ? : -ENXIO;
+}
+
+static const struct gpio_chip rockchip_gpiolib_chip = {
+	.set = rockchip_gpio_set,
+	.get = rockchip_gpio_get,
+	.direction_input = rockchip_gpio_direction_input,
+	.direction_output = rockchip_gpio_direction_output,
+	.to_irq = rockchip_gpio_to_irq,
+	.owner = THIS_MODULE,
+};
+
+/*
+ * Interrupt handling
+ */
+
+static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	struct rockchip_pin_bank *bank = irq_get_handler_data(irq);
+	u32 pend;
+
+	dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name);
+
+	chained_irq_enter(chip, desc);
+
+	pend = readl_relaxed(bank->reg_base + GPIO_INT_STATUS);
+
+	while (pend) {
+		unsigned int virq;
+
+		irq = __ffs(pend);
+		pend &= ~BIT(irq);
+		virq = irq_linear_revmap(bank->domain, irq);
+
+		if (!virq) {
+			dev_err(bank->drvdata->dev, "unmapped irq %d\n", irq);
+			continue;
+		}
+
+		dev_dbg(bank->drvdata->dev, "handling irq %d\n", irq);
+
+		generic_handle_irq(virq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct rockchip_pin_bank *bank = gc->private;
+	u32 mask = BIT(d->hwirq);
+	u32 polarity;
+	u32 level;
+	u32 data;
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
+	else
+		__irq_set_handler_locked(d->irq, handle_level_irq);
+
+	irq_gc_lock(gc);
+
+	level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL);
+	polarity = readl_relaxed(gc->reg_base + GPIO_INT_POLARITY);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		level |= mask;
+		polarity |= mask;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		level |= mask;
+		polarity &= ~mask;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		level &= ~mask;
+		polarity |= mask;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		level &= ~mask;
+		polarity &= ~mask;
+		break;
+	default:
+		irq_gc_unlock(gc);
+		return -EINVAL;
+	}
+
+	writel_relaxed(level, gc->reg_base + GPIO_INTTYPE_LEVEL);
+	writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY);
+
+	irq_gc_unlock(gc);
+
+	/* make sure the pin is configured as gpio input */
+	rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO);
+	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+	data &= ~mask;
+	writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
+
+	return 0;
+}
+
+static int rockchip_interrupts_register(struct platform_device *pdev,
+						struct rockchip_pinctrl *info)
+{
+	struct rockchip_pin_ctrl *ctrl = info->ctrl;
+	struct rockchip_pin_bank *bank = ctrl->pin_banks;
+	unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+	struct irq_chip_generic *gc;
+	int ret;
+	int i;
+
+	for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
+		if (!bank->valid) {
+			dev_warn(&pdev->dev, "bank %s is not valid\n",
+				 bank->name);
+			continue;
+		}
+
+		bank->domain = irq_domain_add_linear(bank->of_node, 32,
+						&irq_generic_chip_ops, NULL);
+		if (!bank->domain) {
+			dev_warn(&pdev->dev, "could not initialize irq domain for bank %s\n",
+				 bank->name);
+			continue;
+		}
+
+		ret = irq_alloc_domain_generic_chips(bank->domain, 32, 1,
+					 "rockchip_gpio_irq", handle_level_irq,
+					 clr, 0, IRQ_GC_INIT_MASK_CACHE);
+		if (ret) {
+			dev_err(&pdev->dev, "could not alloc generic chips for bank %s\n",
+				bank->name);
+			irq_domain_remove(bank->domain);
+			continue;
+		}
+
+		gc = irq_get_domain_generic_chip(bank->domain, 0);
+		gc->reg_base = bank->reg_base;
+		gc->private = bank;
+		gc->chip_types[0].regs.mask = GPIO_INTEN;
+		gc->chip_types[0].regs.ack = GPIO_PORTS_EOI;
+		gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
+		gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
+		gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
+		gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake;
+		gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type;
+
+		irq_set_handler_data(bank->irq, bank);
+		irq_set_chained_handler(bank->irq, rockchip_irq_demux);
+	}
+
+	return 0;
+}
+
+static int rockchip_gpiolib_register(struct platform_device *pdev,
+						struct rockchip_pinctrl *info)
+{
+	struct rockchip_pin_ctrl *ctrl = info->ctrl;
+	struct rockchip_pin_bank *bank = ctrl->pin_banks;
+	struct gpio_chip *gc;
+	int ret;
+	int i;
+
+	for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
+		if (!bank->valid) {
+			dev_warn(&pdev->dev, "bank %s is not valid\n",
+				 bank->name);
+			continue;
+		}
+
+		bank->gpio_chip = rockchip_gpiolib_chip;
+
+		gc = &bank->gpio_chip;
+		gc->base = bank->pin_base;
+		gc->ngpio = bank->nr_pins;
+		gc->dev = &pdev->dev;
+		gc->of_node = bank->of_node;
+		gc->label = bank->name;
+
+		ret = gpiochip_add(gc);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n",
+							gc->label, ret);
+			goto fail;
+		}
+	}
+
+	rockchip_interrupts_register(pdev, info);
+
+	return 0;
+
+fail:
+	for (--i, --bank; i >= 0; --i, --bank) {
+		if (!bank->valid)
+			continue;
+
+		if (gpiochip_remove(&bank->gpio_chip))
+			dev_err(&pdev->dev, "gpio chip %s remove failed\n",
+							bank->gpio_chip.label);
+	}
+	return ret;
+}
+
+static int rockchip_gpiolib_unregister(struct platform_device *pdev,
+						struct rockchip_pinctrl *info)
+{
+	struct rockchip_pin_ctrl *ctrl = info->ctrl;
+	struct rockchip_pin_bank *bank = ctrl->pin_banks;
+	int ret = 0;
+	int i;
+
+	for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank) {
+		if (!bank->valid)
+			continue;
+
+		ret = gpiochip_remove(&bank->gpio_chip);
+	}
+
+	if (ret)
+		dev_err(&pdev->dev, "gpio chip remove failed\n");
+
+	return ret;
+}
+
+static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
+				  struct device *dev)
+{
+	struct resource res;
+
+	if (of_address_to_resource(bank->of_node, 0, &res)) {
+		dev_err(dev, "cannot find IO resource for bank\n");
+		return -ENOENT;
+	}
+
+	bank->reg_base = devm_ioremap_resource(dev, &res);
+	if (IS_ERR(bank->reg_base))
+		return PTR_ERR(bank->reg_base);
+
+	bank->irq = irq_of_parse_and_map(bank->of_node, 0);
+
+	bank->clk = of_clk_get(bank->of_node, 0);
+	if (IS_ERR(bank->clk))
+		return PTR_ERR(bank->clk);
+
+	return clk_prepare_enable(bank->clk);
+}
+
+static const struct of_device_id rockchip_pinctrl_dt_match[];
+
+/* retrieve the soc specific data */
+static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(
+						struct rockchip_pinctrl *d,
+						struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *np;
+	struct rockchip_pin_ctrl *ctrl;
+	struct rockchip_pin_bank *bank;
+	int i;
+
+	match = of_match_node(rockchip_pinctrl_dt_match, node);
+	ctrl = (struct rockchip_pin_ctrl *)match->data;
+
+	for_each_child_of_node(node, np) {
+		if (!of_find_property(np, "gpio-controller", NULL))
+			continue;
+
+		bank = ctrl->pin_banks;
+		for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
+			if (!strcmp(bank->name, np->name)) {
+				bank->of_node = np;
+
+				if (!rockchip_get_bank_data(bank, &pdev->dev))
+					bank->valid = true;
+
+				break;
+			}
+		}
+	}
+
+	bank = ctrl->pin_banks;
+	for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
+		spin_lock_init(&bank->slock);
+		bank->drvdata = d;
+		bank->pin_base = ctrl->nr_pins;
+		ctrl->nr_pins += bank->nr_pins;
+	}
+
+	return ctrl;
+}
+
+static int rockchip_pinctrl_probe(struct platform_device *pdev)
+{
+	struct rockchip_pinctrl *info;
+	struct device *dev = &pdev->dev;
+	struct rockchip_pin_ctrl *ctrl;
+	struct resource *res;
+	int ret;
+
+	if (!dev->of_node) {
+		dev_err(dev, "device tree node not found\n");
+		return -ENODEV;
+	}
+
+	info = devm_kzalloc(dev, sizeof(struct rockchip_pinctrl), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	ctrl = rockchip_pinctrl_get_soc_data(info, pdev);
+	if (!ctrl) {
+		dev_err(dev, "driver data not available\n");
+		return -EINVAL;
+	}
+	info->ctrl = ctrl;
+	info->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "cannot find IO resource\n");
+		return -ENOENT;
+	}
+
+	info->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(info->reg_base))
+		return PTR_ERR(info->reg_base);
+
+	ret = rockchip_gpiolib_register(pdev, info);
+	if (ret)
+		return ret;
+
+	ret = rockchip_pinctrl_register(pdev, info);
+	if (ret) {
+		rockchip_gpiolib_unregister(pdev, info);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, info);
+
+	return 0;
+}
+
+static struct rockchip_pin_bank rk2928_pin_banks[] = {
+	PIN_BANK(0, 32, "gpio0"),
+	PIN_BANK(1, 32, "gpio1"),
+	PIN_BANK(2, 32, "gpio2"),
+	PIN_BANK(3, 32, "gpio3"),
+};
+
+static struct rockchip_pin_ctrl rk2928_pin_ctrl = {
+		.pin_banks		= rk2928_pin_banks,
+		.nr_banks		= ARRAY_SIZE(rk2928_pin_banks),
+		.label			= "RK2928-GPIO",
+		.mux_offset		= 0xa8,
+		.pull_offset		= 0x118,
+		.pull_auto		= 1,
+		.pull_bank_stride	= 8,
+};
+
+static struct rockchip_pin_bank rk3066a_pin_banks[] = {
+	PIN_BANK(0, 32, "gpio0"),
+	PIN_BANK(1, 32, "gpio1"),
+	PIN_BANK(2, 32, "gpio2"),
+	PIN_BANK(3, 32, "gpio3"),
+	PIN_BANK(4, 32, "gpio4"),
+	PIN_BANK(6, 16, "gpio6"),
+};
+
+static struct rockchip_pin_ctrl rk3066a_pin_ctrl = {
+		.pin_banks		= rk3066a_pin_banks,
+		.nr_banks		= ARRAY_SIZE(rk3066a_pin_banks),
+		.label			= "RK3066a-GPIO",
+		.mux_offset		= 0xa8,
+		.pull_offset		= 0x118,
+		.pull_auto		= 1,
+		.pull_bank_stride	= 8,
+};
+
+static struct rockchip_pin_bank rk3066b_pin_banks[] = {
+	PIN_BANK(0, 32, "gpio0"),
+	PIN_BANK(1, 32, "gpio1"),
+	PIN_BANK(2, 32, "gpio2"),
+	PIN_BANK(3, 32, "gpio3"),
+};
+
+static struct rockchip_pin_ctrl rk3066b_pin_ctrl = {
+		.pin_banks	= rk3066b_pin_banks,
+		.nr_banks	= ARRAY_SIZE(rk3066b_pin_banks),
+		.label		= "RK3066b-GPIO",
+		.mux_offset	= 0x60,
+		.pull_offset	= -EINVAL,
+};
+
+static struct rockchip_pin_bank rk3188_pin_banks[] = {
+	PIN_BANK(0, 32, "gpio0"),
+	PIN_BANK(1, 32, "gpio1"),
+	PIN_BANK(2, 32, "gpio2"),
+	PIN_BANK(3, 32, "gpio3"),
+};
+
+static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
+		.pin_banks		= rk3188_pin_banks,
+		.nr_banks		= ARRAY_SIZE(rk3188_pin_banks),
+		.label			= "RK3188-GPIO",
+		.mux_offset		= 0x68,
+		.pull_offset		= 0x164,
+		.pull_bank_stride	= 16,
+};
+
+static const struct of_device_id rockchip_pinctrl_dt_match[] = {
+	{ .compatible = "rockchip,rk2928-pinctrl",
+		.data = (void *)&rk2928_pin_ctrl },
+	{ .compatible = "rockchip,rk3066a-pinctrl",
+		.data = (void *)&rk3066a_pin_ctrl },
+	{ .compatible = "rockchip,rk3066b-pinctrl",
+		.data = (void *)&rk3066b_pin_ctrl },
+	{ .compatible = "rockchip,rk3188-pinctrl",
+		.data = (void *)&rk3188_pin_ctrl },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rockchip_pinctrl_dt_match);
+
+static struct platform_driver rockchip_pinctrl_driver = {
+	.probe		= rockchip_pinctrl_probe,
+	.driver = {
+		.name	= "rockchip-pinctrl",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(rockchip_pinctrl_dt_match),
+	},
+};
+
+static int __init rockchip_pinctrl_drv_register(void)
+{
+	return platform_driver_register(&rockchip_pinctrl_driver);
+}
+postcore_initcall(rockchip_pinctrl_drv_register);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("Rockchip pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index 0a6c720b665..a7fa9e2d475 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -50,7 +50,7 @@ static struct pin_config {
 };
 
 /* Global list of devices (struct samsung_pinctrl_drv_data) */
-LIST_HEAD(drvdata_list);
+static LIST_HEAD(drvdata_list);
 
 static unsigned int pin_base;
 
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index b9fa0461860..6866548fab3 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -30,7 +30,7 @@
 #define DRIVER_NAME			"pinctrl-single"
 #define PCS_MUX_PINS_NAME		"pinctrl-single,pins"
 #define PCS_MUX_BITS_NAME		"pinctrl-single,bits"
-#define PCS_REG_NAME_LEN		((sizeof(unsigned long) * 2) + 1)
+#define PCS_REG_NAME_LEN		((sizeof(unsigned long) * 2) + 3)
 #define PCS_OFF_DISABLED		~0U
 
 /**
@@ -163,6 +163,7 @@ struct pcs_name {
  * @foff:	value to turn mux off
  * @fmax:	max number of functions in fmask
  * @is_pinconf:	whether supports pinconf
+ * @bits_per_pin:number of bits per pin
  * @names:	array of register names for pins
  * @pins:	physical pins on the SoC
  * @pgtree:	pingroup index radix tree
@@ -190,6 +191,7 @@ struct pcs_device {
 	unsigned fmax;
 	bool bits_per_mux;
 	bool is_pinconf;
+	unsigned bits_per_pin;
 	struct pcs_name *names;
 	struct pcs_data pins;
 	struct radix_tree_root pgtree;
@@ -431,10 +433,11 @@ static int pcs_enable(struct pinctrl_dev *pctldev, unsigned fselector,
 
 		vals = &func->vals[i];
 		val = pcs->read(vals->reg);
-		if (!vals->mask)
-			mask = pcs->fmask;
+
+		if (pcs->bits_per_mux)
+			mask = vals->mask;
 		else
-			mask = pcs->fmask & vals->mask;
+			mask = pcs->fmask;
 
 		val &= ~mask;
 		val |= (vals->val & mask);
@@ -741,7 +744,8 @@ static const struct pinconf_ops pcs_pinconf_ops = {
  * @pcs: pcs driver instance
  * @offset: register offset from base
  */
-static int pcs_add_pin(struct pcs_device *pcs, unsigned offset)
+static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
+		unsigned pin_pos)
 {
 	struct pinctrl_pin_desc *pin;
 	struct pcs_name *pn;
@@ -756,8 +760,8 @@ static int pcs_add_pin(struct pcs_device *pcs, unsigned offset)
 
 	pin = &pcs->pins.pa[i];
 	pn = &pcs->names[i];
-	sprintf(pn->name, "%lx",
-		(unsigned long)pcs->res->start + offset);
+	sprintf(pn->name, "%lx.%d",
+		(unsigned long)pcs->res->start + offset, pin_pos);
 	pin->name = pn->name;
 	pin->number = i;
 	pcs->pins.cur++;
@@ -777,9 +781,17 @@ static int pcs_add_pin(struct pcs_device *pcs, unsigned offset)
 static int pcs_allocate_pin_table(struct pcs_device *pcs)
 {
 	int mux_bytes, nr_pins, i;
+	int num_pins_in_register = 0;
 
 	mux_bytes = pcs->width / BITS_PER_BYTE;
-	nr_pins = pcs->size / mux_bytes;
+
+	if (pcs->bits_per_mux) {
+		pcs->bits_per_pin = fls(pcs->fmask);
+		nr_pins = (pcs->size * BITS_PER_BYTE) / pcs->bits_per_pin;
+		num_pins_in_register = pcs->width / pcs->bits_per_pin;
+	} else {
+		nr_pins = pcs->size / mux_bytes;
+	}
 
 	dev_dbg(pcs->dev, "allocating %i pins\n", nr_pins);
 	pcs->pins.pa = devm_kzalloc(pcs->dev,
@@ -800,9 +812,17 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
 	for (i = 0; i < pcs->desc.npins; i++) {
 		unsigned offset;
 		int res;
-
-		offset = i * mux_bytes;
-		res = pcs_add_pin(pcs, offset);
+		int byte_num;
+		int pin_pos = 0;
+
+		if (pcs->bits_per_mux) {
+			byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE;
+			offset = (byte_num / mux_bytes) * mux_bytes;
+			pin_pos = i % num_pins_in_register;
+		} else {
+			offset = i * mux_bytes;
+		}
+		res = pcs_add_pin(pcs, offset, pin_pos);
 		if (res < 0) {
 			dev_err(pcs->dev, "error adding pins: %i\n", res);
 			return res;
@@ -919,7 +939,10 @@ static int pcs_get_pin_by_offset(struct pcs_device *pcs, unsigned offset)
 		return -EINVAL;
 	}
 
-	index = offset / (pcs->width / BITS_PER_BYTE);
+	if (pcs->bits_per_mux)
+		index = (offset * BITS_PER_BYTE) / pcs->bits_per_pin;
+	else
+		index = offset / (pcs->width / BITS_PER_BYTE);
 
 	return index;
 }
@@ -1097,29 +1120,18 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
 {
 	struct pcs_func_vals *vals;
 	const __be32 *mux;
-	int size, params, rows, *pins, index = 0, found = 0, res = -ENOMEM;
+	int size, rows, *pins, index = 0, found = 0, res = -ENOMEM;
 	struct pcs_function *function;
 
-	if (pcs->bits_per_mux) {
-		params = 3;
-		mux = of_get_property(np, PCS_MUX_BITS_NAME, &size);
-	} else {
-		params = 2;
-		mux = of_get_property(np, PCS_MUX_PINS_NAME, &size);
-	}
-
-	if (!mux) {
-		dev_err(pcs->dev, "no valid property for %s\n", np->name);
-		return -EINVAL;
-	}
-
-	if (size < (sizeof(*mux) * params)) {
-		dev_err(pcs->dev, "bad data for %s\n", np->name);
+	mux = of_get_property(np, PCS_MUX_PINS_NAME, &size);
+	if ((!mux) || (size < sizeof(*mux) * 2)) {
+		dev_err(pcs->dev, "bad data for mux %s\n",
+			np->name);
 		return -EINVAL;
 	}
 
 	size /= sizeof(*mux);	/* Number of elements in array */
-	rows = size / params;
+	rows = size / 2;
 
 	vals = devm_kzalloc(pcs->dev, sizeof(*vals) * rows, GFP_KERNEL);
 	if (!vals)
@@ -1137,10 +1149,6 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
 		val = be32_to_cpup(mux + index++);
 		vals[found].reg = pcs->base + offset;
 		vals[found].val = val;
-		if (params == 3) {
-			val = be32_to_cpup(mux + index++);
-			vals[found].mask = val;
-		}
 
 		pin = pcs_get_pin_by_offset(pcs, offset);
 		if (pin < 0) {
@@ -1189,6 +1197,125 @@ free_vals:
 
 	return res;
 }
+
+#define PARAMS_FOR_BITS_PER_MUX 3
+
+static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs,
+						struct device_node *np,
+						struct pinctrl_map **map,
+						unsigned *num_maps,
+						const char **pgnames)
+{
+	struct pcs_func_vals *vals;
+	const __be32 *mux;
+	int size, rows, *pins, index = 0, found = 0, res = -ENOMEM;
+	int npins_in_row;
+	struct pcs_function *function;
+
+	mux = of_get_property(np, PCS_MUX_BITS_NAME, &size);
+
+	if (!mux) {
+		dev_err(pcs->dev, "no valid property for %s\n", np->name);
+		return -EINVAL;
+	}
+
+	if (size < (sizeof(*mux) * PARAMS_FOR_BITS_PER_MUX)) {
+		dev_err(pcs->dev, "bad data for %s\n", np->name);
+		return -EINVAL;
+	}
+
+	/* Number of elements in array */
+	size /= sizeof(*mux);
+
+	rows = size / PARAMS_FOR_BITS_PER_MUX;
+	npins_in_row = pcs->width / pcs->bits_per_pin;
+
+	vals = devm_kzalloc(pcs->dev, sizeof(*vals) * rows * npins_in_row,
+			GFP_KERNEL);
+	if (!vals)
+		return -ENOMEM;
+
+	pins = devm_kzalloc(pcs->dev, sizeof(*pins) * rows * npins_in_row,
+			GFP_KERNEL);
+	if (!pins)
+		goto free_vals;
+
+	while (index < size) {
+		unsigned offset, val;
+		unsigned mask, bit_pos, val_pos, mask_pos, submask;
+		unsigned pin_num_from_lsb;
+		int pin;
+
+		offset = be32_to_cpup(mux + index++);
+		val = be32_to_cpup(mux + index++);
+		mask = be32_to_cpup(mux + index++);
+
+		/* Parse pins in each row from LSB */
+		while (mask) {
+			bit_pos = ffs(mask);
+			pin_num_from_lsb = bit_pos / pcs->bits_per_pin;
+			mask_pos = ((pcs->fmask) << (bit_pos - 1));
+			val_pos = val & mask_pos;
+			submask = mask & mask_pos;
+			mask &= ~mask_pos;
+
+			if (submask != mask_pos) {
+				dev_warn(pcs->dev,
+						"Invalid submask 0x%x for %s at 0x%x\n",
+						submask, np->name, offset);
+				continue;
+			}
+
+			vals[found].mask = submask;
+			vals[found].reg = pcs->base + offset;
+			vals[found].val = val_pos;
+
+			pin = pcs_get_pin_by_offset(pcs, offset);
+			if (pin < 0) {
+				dev_err(pcs->dev,
+					"could not add functions for %s %ux\n",
+					np->name, offset);
+				break;
+			}
+			pins[found++] = pin + pin_num_from_lsb;
+		}
+	}
+
+	pgnames[0] = np->name;
+	function = pcs_add_function(pcs, np, np->name, vals, found, pgnames, 1);
+	if (!function)
+		goto free_pins;
+
+	res = pcs_add_pingroup(pcs, np, np->name, pins, found);
+	if (res < 0)
+		goto free_function;
+
+	(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
+	(*map)->data.mux.group = np->name;
+	(*map)->data.mux.function = np->name;
+
+	if (pcs->is_pinconf) {
+		dev_err(pcs->dev, "pinconf not supported\n");
+		goto free_pingroups;
+	}
+
+	*num_maps = 1;
+	return 0;
+
+free_pingroups:
+	pcs_free_pingroups(pcs);
+	*num_maps = 1;
+free_function:
+	pcs_remove_function(pcs, function);
+
+free_pins:
+	devm_kfree(pcs->dev, pins);
+
+free_vals:
+	devm_kfree(pcs->dev, vals);
+
+	return res;
+}
 /**
  * pcs_dt_node_to_map() - allocates and parses pinctrl maps
  * @pctldev: pinctrl instance
@@ -1219,12 +1346,22 @@ static int pcs_dt_node_to_map(struct pinctrl_dev *pctldev,
 		goto free_map;
 	}
 
-	ret = pcs_parse_one_pinctrl_entry(pcs, np_config, map, num_maps,
-					  pgnames);
-	if (ret < 0) {
-		dev_err(pcs->dev, "no pins entries for %s\n",
-			np_config->name);
-		goto free_pgnames;
+	if (pcs->bits_per_mux) {
+		ret = pcs_parse_bits_in_pinctrl_entry(pcs, np_config, map,
+				num_maps, pgnames);
+		if (ret < 0) {
+			dev_err(pcs->dev, "no pins entries for %s\n",
+				np_config->name);
+			goto free_pgnames;
+		}
+	} else {
+		ret = pcs_parse_one_pinctrl_entry(pcs, np_config, map,
+				num_maps, pgnames);
+		if (ret < 0) {
+			dev_err(pcs->dev, "no pins entries for %s\n",
+				np_config->name);
+			goto free_pgnames;
+		}
 	}
 
 	return 0;
@@ -1346,6 +1483,29 @@ static int pcs_add_gpio_func(struct device_node *node, struct pcs_device *pcs)
 	return ret;
 }
 
+static int pinctrl_single_suspend(struct platform_device *pdev,
+					pm_message_t state)
+{
+	struct pcs_device *pcs;
+
+	pcs = platform_get_drvdata(pdev);
+	if (!pcs)
+		return -EINVAL;
+
+	return pinctrl_force_sleep(pcs->pctl);
+}
+
+static int pinctrl_single_resume(struct platform_device *pdev)
+{
+	struct pcs_device *pcs;
+
+	pcs = platform_get_drvdata(pdev);
+	if (!pcs)
+		return -EINVAL;
+
+	return pinctrl_force_default(pcs->pctl);
+}
+
 static int pcs_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -1494,6 +1654,10 @@ static struct platform_driver pcs_driver = {
 		.name		= DRIVER_NAME,
 		.of_match_table	= pcs_of_match,
 	},
+#ifdef CONFIG_PM
+	.suspend = pinctrl_single_suspend,
+	.resume = pinctrl_single_resume,
+#endif
 };
 
 module_platform_driver(pcs_driver);
diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h
new file mode 100644
index 00000000000..2eeae0c066c
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
@@ -0,0 +1,2023 @@
+/*
+ * Allwinner A1X SoCs pinctrl driver.
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PINCTRL_SUNXI_PINS_H
+#define __PINCTRL_SUNXI_PINS_H
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun4i_a10_pins[] = {
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXD3 */
+		  SUNXI_FUNCTION(0x3, "spi1"),		/* CS0 */
+		  SUNXI_FUNCTION(0x4, "uart2")),	/* RTS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXD2 */
+		  SUNXI_FUNCTION(0x3, "spi1"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "uart2")),	/* CTS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXD1 */
+		  SUNXI_FUNCTION(0x3, "spi1"),		/* MOSI */
+		  SUNXI_FUNCTION(0x4, "uart2")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXD0 */
+		  SUNXI_FUNCTION(0x3, "spi1"),		/* MISO */
+		  SUNXI_FUNCTION(0x4, "uart2")),	/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXD3 */
+		  SUNXI_FUNCTION(0x3, "spi1")),		/* CS1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXD2 */
+		  SUNXI_FUNCTION(0x3, "spi3")),		/* CS0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXD1 */
+		  SUNXI_FUNCTION(0x3, "spi3")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXD0 */
+		  SUNXI_FUNCTION(0x3, "spi3")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXCK */
+		  SUNXI_FUNCTION(0x3, "spi3")),		/* MISO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXERR */
+		  SUNXI_FUNCTION(0x3, "spi3")),		/* CS1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXDV */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* EMDC */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* EMDIO */
+		  SUNXI_FUNCTION(0x3, "uart6"),		/* TX */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* RTS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXEN */
+		  SUNXI_FUNCTION(0x3, "uart6"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* CTS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXCK */
+		  SUNXI_FUNCTION(0x3, "uart7"),		/* TX */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* DTR */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ECRS */
+		  SUNXI_FUNCTION(0x3, "uart7"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* DSR */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ECOL */
+		  SUNXI_FUNCTION(0x3, "can"),		/* TX */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* DCD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXERR */
+		  SUNXI_FUNCTION(0x3, "can"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* RING */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0")),		/* SDA */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "pwm")),		/* PWM0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ir0")),		/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ir0")),		/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* MCLK */
+		  SUNXI_FUNCTION(0x3, "ac97")),		/* MCLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* BCLK */
+		  SUNXI_FUNCTION(0x3, "ac97")),		/* BCLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* LRCK */
+		  SUNXI_FUNCTION(0x3, "ac97")),		/* SYNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* DO0 */
+		  SUNXI_FUNCTION(0x3, "ac97")),		/* DO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s")),		/* DO1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s")),		/* DO2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s")),		/* DO3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* DI */
+		  SUNXI_FUNCTION(0x3, "ac97")),		/* DI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2")),		/* CS1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* CS0 */
+		  SUNXI_FUNCTION(0x3, "jtag")),		/* MS0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "jtag")),		/* CK0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* MOSI */
+		  SUNXI_FUNCTION(0x3, "jtag")),		/* DO0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* MISO */
+		  SUNXI_FUNCTION(0x3, "jtag")),		/* DI0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1")),		/* SDA */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB20,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c2")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB21,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c2")),		/* SDA */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB22,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart0"),		/* TX */
+		  SUNXI_FUNCTION(0x3, "ir1")),		/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB23,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart0"),		/* RX */
+		  SUNXI_FUNCTION(0x3, "ir1")),		/* RX */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NWE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NALE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* MISO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCLE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NCE1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NCE0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NRE# */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NRB0 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NRB1 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ0 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ1 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ2 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ3 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NDQ4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NDQ5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NDQ6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NDQ7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NWP */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NCE2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NCE3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE4 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* CS0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC20,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE5 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC21,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE6 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC22,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE7 */
+		  SUNXI_FUNCTION(0x3, "spi2")),		/* MISO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC23,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* CS0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC24,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NDQS */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VP0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VN0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VP1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VN1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VP2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VN2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VPC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D8 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VP3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D9 */
+		  SUNXI_FUNCTION(0x3, "lvds0")),	/* VM3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D10 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VP0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D11 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VN0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D12 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VP1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D13 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VN1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D14 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VP2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D15 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VN2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D16 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VPC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D17 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D18 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VP3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D19 */
+		  SUNXI_FUNCTION(0x3, "lvds1")),	/* VN3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D20 */
+		  SUNXI_FUNCTION(0x3, "csi1")),		/* MCLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D21 */
+		  SUNXI_FUNCTION(0x3, "sim")),		/* VPPEN */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D22 */
+		  SUNXI_FUNCTION(0x3, "sim")),		/* VPPPP */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D23 */
+		  SUNXI_FUNCTION(0x3, "sim")),		/* DET */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "sim")),		/* VCCEN */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* DE */
+		  SUNXI_FUNCTION(0x3, "sim")),		/* RST */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x3, "sim")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x3, "sim")),		/* SDA */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* PCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* ERR */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* CK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* SYNC */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* HSYNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* DVLD */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* VSYNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "sim")),		/* VPPEN */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* D4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* D5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* D6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "csi0")),		/* D7 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "jtag")),		/* MSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D0 */
+		  SUNXI_FUNCTION(0x4, "jtag")),		/* DI1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "uart0")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CMD */
+		  SUNXI_FUNCTION(0x4, "jtag")),		/* DO1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D3 */
+		  SUNXI_FUNCTION(0x4, "uart0")),	/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D2 */
+		  SUNXI_FUNCTION(0x4, "jtag")),		/* CK1 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* PCK */
+		  SUNXI_FUNCTION(0x4, "mmc1")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* ERR */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* CK */
+		  SUNXI_FUNCTION(0x4, "mmc1")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* SYNC */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x4, "mmc1")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* DVLD */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x4, "mmc1")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* D0 */
+		  SUNXI_FUNCTION(0x4, "mmc1"),		/* D2 */
+		  SUNXI_FUNCTION(0x5, "csi0")),		/* D8 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "mmc1"),		/* D3 */
+		  SUNXI_FUNCTION(0x5, "csi0")),		/* D9 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* D2 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* TX */
+		  SUNXI_FUNCTION(0x5, "csi0")),		/* D10 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* D3 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* RX */
+		  SUNXI_FUNCTION(0x5, "csi0")),		/* D11 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* D4 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* RTS */
+		  SUNXI_FUNCTION(0x5, "csi0")),		/* D12 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* D5 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* CTS */
+		  SUNXI_FUNCTION(0x5, "csi0")),		/* D13 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* D6 */
+		  SUNXI_FUNCTION(0x4, "uart4"),		/* TX */
+		  SUNXI_FUNCTION(0x5, "csi0")),		/* D14 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts1"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "csi1"),		/* D7 */
+		  SUNXI_FUNCTION(0x4, "uart4"),		/* RX */
+		  SUNXI_FUNCTION(0x5, "csi0")),		/* D15 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAA0 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 0),		/* EINT0 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAA1 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 1),		/* EINT1 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAA2 */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 2),		/* EINT2 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAIRQ */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 3),		/* EINT3 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD0 */
+		  SUNXI_FUNCTION(0x4, "uart4"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 4),		/* EINT4 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD1 */
+		  SUNXI_FUNCTION(0x4, "uart4"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 5),		/* EINT5 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD2 */
+		  SUNXI_FUNCTION(0x4, "uart5"),		/* TX */
+		  SUNXI_FUNCTION(0x5, "ms"),		/* BS */
+		  SUNXI_FUNCTION_IRQ(0x6, 6),		/* EINT6 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD3 */
+		  SUNXI_FUNCTION(0x4, "uart5"),		/* RX */
+		  SUNXI_FUNCTION(0x5, "ms"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ(0x6, 7),		/* EINT7 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D8 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD4 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN0 */
+		  SUNXI_FUNCTION(0x5, "ms"),		/* D0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 8),		/* EINT8 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D8 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D9 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD5 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN1 */
+		  SUNXI_FUNCTION(0x5, "ms"),		/* D1 */
+		  SUNXI_FUNCTION_IRQ(0x6, 9),		/* EINT9 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D9 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D10 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD6 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN2 */
+		  SUNXI_FUNCTION(0x5, "ms"),		/* D2 */
+		  SUNXI_FUNCTION_IRQ(0x6, 10),		/* EINT10 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D10 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D11 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD7 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN3 */
+		  SUNXI_FUNCTION(0x5, "ms"),		/* D3 */
+		  SUNXI_FUNCTION_IRQ(0x6, 11),		/* EINT11 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D11 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D12 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD8 */
+		  SUNXI_FUNCTION(0x4, "ps2"),		/* SCK1 */
+		  SUNXI_FUNCTION_IRQ(0x6, 12),		/* EINT12 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D12 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D13 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD9 */
+		  SUNXI_FUNCTION(0x4, "ps2"),		/* SDA1 */
+		  SUNXI_FUNCTION(0x5, "sim"),		/* RST */
+		  SUNXI_FUNCTION_IRQ(0x6, 13),		/* EINT13 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D13 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D14 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD10 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN4 */
+		  SUNXI_FUNCTION(0x5, "sim"),		/* VPPEN */
+		  SUNXI_FUNCTION_IRQ(0x6, 14),		/* EINT14 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D14 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D15 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD11 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN5 */
+		  SUNXI_FUNCTION(0x5, "sim"),		/* VPPPP */
+		  SUNXI_FUNCTION_IRQ(0x6, 15),		/* EINT15 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D15 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D16 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD12 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN6 */
+		  SUNXI_FUNCTION_IRQ(0x6, 16),		/* EINT16 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D16 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D17 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD13 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* IN7 */
+		  SUNXI_FUNCTION(0x5, "sim"),		/* VCCEN */
+		SUNXI_FUNCTION_IRQ(0x6, 17),		/* EINT17 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D17 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D18 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD14 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT0 */
+		  SUNXI_FUNCTION(0x5, "sim"),		/* SCK */
+		SUNXI_FUNCTION_IRQ(0x6, 18),		/* EINT18 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D18 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D19 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAD15 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT1 */
+		  SUNXI_FUNCTION(0x5, "sim"),		/* SDA */
+		SUNXI_FUNCTION_IRQ(0x6, 19),		/* EINT19 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D19 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH20,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D20 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAOE */
+		  SUNXI_FUNCTION(0x4, "can"),		/* TX */
+		SUNXI_FUNCTION_IRQ(0x6, 20),		/* EINT20 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D20 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH21,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D21 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATADREQ */
+		  SUNXI_FUNCTION(0x4, "can"),		/* RX */
+		SUNXI_FUNCTION_IRQ(0x6, 21),		/* EINT21 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D21 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH22,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D22 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATADACK */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT2 */
+		  SUNXI_FUNCTION(0x5, "mmc1"),		/* CMD */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D22 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH23,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* D23 */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATACS0 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT3 */
+		  SUNXI_FUNCTION(0x5, "mmc1"),		/* CLK */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* D23 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH24,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATACS1 */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT4 */
+		  SUNXI_FUNCTION(0x5, "mmc1"),		/* D0 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* PCLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH25,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* DE */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAIORDY */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT5 */
+		  SUNXI_FUNCTION(0x5, "mmc1"),		/* D1 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* FIELD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH26,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAIOR */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT6 */
+		  SUNXI_FUNCTION(0x5, "mmc1"),		/* D2 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* HSYNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH27,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd1"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x3, "pata"),		/* ATAIOW */
+		  SUNXI_FUNCTION(0x4, "keypad"),	/* OUT7 */
+		  SUNXI_FUNCTION(0x5, "mmc1"),		/* D3 */
+		  SUNXI_FUNCTION(0x7, "csi1")),		/* VSYNC */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out")),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out")),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out")),
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "pwm")),		/* PWM1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc3")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc3")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc3")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc3")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc3")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc3")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* CS0 */
+		  SUNXI_FUNCTION(0x3, "uart5"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 22)),		/* EINT22 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "uart5"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 23)),		/* EINT23 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* MOSI */
+		  SUNXI_FUNCTION(0x3, "uart6"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 24)),		/* EINT24 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* MISO */
+		  SUNXI_FUNCTION(0x3, "uart6"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 25)),		/* EINT25 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi0"),		/* CS1 */
+		  SUNXI_FUNCTION(0x3, "ps2"),		/* SCK1 */
+		  SUNXI_FUNCTION(0x4, "timer4"),	/* TCLKIN0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 26)),		/* EINT26 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS1 */
+		  SUNXI_FUNCTION(0x3, "ps2"),		/* SDA1 */
+		  SUNXI_FUNCTION(0x4, "timer5"),	/* TCLKIN1 */
+		  SUNXI_FUNCTION_IRQ(0x6, 27)),		/* EINT27 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS0 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 28)),		/* EINT28 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 29)),		/* EINT29 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* MOSI */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 30)),		/* EINT30 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* MISO */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 31)),		/* EINT31 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI20,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ps2"),		/* SCK0 */
+		  SUNXI_FUNCTION(0x3, "uart7"),		/* TX */
+		  SUNXI_FUNCTION(0x4, "hdmi")),		/* HSCL */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI21,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ps2"),		/* SDA0 */
+		  SUNXI_FUNCTION(0x3, "uart7"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "hdmi")),		/* HSDA */
+};
+
+static const struct sunxi_desc_pin sun5i_a10s_pins[] = {
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXD3 */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* CLK */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* IN0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXD2 */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* ERR */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* IN1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXD1 */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* SYNC */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* IN2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXD0 */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* DLVD */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* IN3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXD3 */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* D0 */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* IN4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXD2 */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* D1 */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* IN5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXD1 */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* D2 */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* IN6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXD0 */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* D3 */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* IN7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXCK */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* D4 */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* DTR */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* OUT0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXERR */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* D5 */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* DSR */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* OUT1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ERXDV */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* D6 */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* DCD */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* OUT2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* EMDC */
+		  SUNXI_FUNCTION(0x3, "ts0"),		/* D7 */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* RING */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* OUT3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* EMDIO */
+		  SUNXI_FUNCTION(0x3, "uart1"),		/* TX */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* OUT4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXEN */
+		  SUNXI_FUNCTION(0x3, "uart1"),		/* RX */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* OUT5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXCK */
+		  SUNXI_FUNCTION(0x3, "uart1"),		/* CTS */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* TX */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* OUT6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ECRS */
+		  SUNXI_FUNCTION(0x3, "uart1"),		/* RTS */
+		  SUNXI_FUNCTION(0x4, "uart3"),		/* RX */
+		  SUNXI_FUNCTION(0x5, "keypad")),	/* OUT7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ECOL */
+		  SUNXI_FUNCTION(0x3, "uart2")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "emac"),		/* ETXERR */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 31)),		/* EINT31 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0")),		/* SDA */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "pwm"),		/* PWM0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 16)),		/* EINT16 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ir0"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 17)),		/* EINT17 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ir0"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 18)),		/* EINT18 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* MCLK */
+		  SUNXI_FUNCTION_IRQ(0x6, 19)),		/* EINT19 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* BCLK */
+		  SUNXI_FUNCTION_IRQ(0x6, 20)),		/* EINT20 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* LRCK */
+		  SUNXI_FUNCTION_IRQ(0x6, 21)),		/* EINT21 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* DO */
+		  SUNXI_FUNCTION_IRQ(0x6, 22)),		/* EINT22 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2s"),		/* DI */
+		  SUNXI_FUNCTION_IRQ(0x6, 23)),		/* EINT23 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* CS1 */
+		  SUNXI_FUNCTION_IRQ(0x6, 24)),		/* EINT24 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* CS0 */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* MS0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 25)),		/* EINT25 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* CK0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 26)),		/* EINT26 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* MOSI */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* DO0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 27)),		/* EINT27 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* MISO */
+		  SUNXI_FUNCTION(0x3, "jtag"),		/* DI0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 28)),		/* EINT28 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1")),		/* SDA */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c2")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c2")),		/* SDA */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart0"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 29)),		/* EINT29 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB20,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart0"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 30)),		/* EINT30 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NWE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NALE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* MISO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCLE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE1 */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* CS0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NCE0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NRE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NRB0 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NRB1 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ0 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ1 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ2 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ3 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ4 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ5 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ6 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ7 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NWP */
+		  SUNXI_FUNCTION(0x4, "uart3")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE2 */
+		  SUNXI_FUNCTION(0x4, "uart3")),	/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE3 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* TX */
+		  SUNXI_FUNCTION(0x4, "uart3")),	/* CTS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE4 */
+		  SUNXI_FUNCTION(0x3, "uart2"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "uart3")),	/* RTS */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "uart2")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "uart2")),	/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "uart2")),	/* CTS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "uart2")),	/* RTS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ECRS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ECOL */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D8 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D9 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D10 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ERXD0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D11 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ERXD1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D12 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ERXD2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D13 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ERXD3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D14 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ERXCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D15 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ERXERR */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D16 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D17 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D18 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ERXDV */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D19 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ETXD0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D20 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ETXD1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D21 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ETXD2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D22 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ETXD3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* D23 */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ETXEN */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ETXCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* DE */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* ETXERR */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* EMDC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x3, "emac")),		/* EMDIO */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* PCK */
+		  SUNXI_FUNCTION(0x4, "spi2"),		/* CS0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 14)),		/* EINT14 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* ERR */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* CK */
+		  SUNXI_FUNCTION(0x4, "spi2"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ(0x6, 15)),		/* EINT15 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* SYNC */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x4, "spi2")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* DVLD */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x4, "spi2")),		/* MISO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D0 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D2 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D3 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D4 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D5 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D6 */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ts0"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D7 */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* RX */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "jtag")),		/* MS1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D0 */
+		  SUNXI_FUNCTION(0x4, "jtag")),		/* DI1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "uart0")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CMD */
+		  SUNXI_FUNCTION(0x4, "jtag")),		/* DO1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D3 */
+		  SUNXI_FUNCTION(0x4, "uart0")),	/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D2 */
+		  SUNXI_FUNCTION(0x4, "jtag")),		/* CK1 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x2, "gps"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ(0x6, 0)),		/* EINT0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x2, "gps"),		/* SIGN */
+		  SUNXI_FUNCTION_IRQ(0x6, 1)),		/* EINT1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x2, "gps"),		/* MAG */
+		  SUNXI_FUNCTION_IRQ(0x6, 2)),		/* EINT2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* CMD */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 3)),		/* EINT3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 4)),		/* EINT4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* DO */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 5)),		/* EINT5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* RTS */
+		  SUNXI_FUNCTION(0x5, "uart2"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 6)),		/* EINT6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D2 */
+		  SUNXI_FUNCTION(0x5, "uart2"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 7)),		/* EINT7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D3 */
+		  SUNXI_FUNCTION(0x5, "uart2"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 8)),		/* EINT8 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS0 */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 9)),		/* EINT9 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 10)),		/* EINT10 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* MOSI */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 11)),		/* EINT11 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* MISO */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 12)),		/* EINT12 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS1 */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* PWM1 */
+		  SUNXI_FUNCTION(0x5, "uart2"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 13)),		/* EINT13 */
+};
+
+static const struct sunxi_desc_pin sun5i_a13_pins[] = {
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0")),		/* SDA */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "pwm"),
+		  SUNXI_FUNCTION_IRQ(0x6, 16)),		/* EINT16 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ir0"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 17)),		/* EINT17 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "ir0"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 18)),		/* EINT18 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi2"),		/* CS1 */
+		  SUNXI_FUNCTION_IRQ(0x6, 24)),		/* EINT24 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1")),		/* SDA */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c2")),		/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c2")),		/* SDA */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NWE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NALE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* MISO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCLE */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NCE1 */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* CS0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NCE0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0")),	/* NRE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NRB0 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NRB1 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ0 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ1 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ2 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ3 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ4 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ5 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ6 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ7 */
+		  SUNXI_FUNCTION(0x3, "mmc2")),		/* D7 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "nand0"),		/* NDQS */
+		  SUNXI_FUNCTION(0x4, "uart3")),	/* RTS */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D7 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D10 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D11 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D12 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D13 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D14 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D15 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D18 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D19 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D20 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D21 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D22 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* D23 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* DE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* HSYNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "lcd0")),		/* VSYNC */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* PCLK */
+		  SUNXI_FUNCTION(0x4, "spi2"),		/* CS0 */
+		  SUNXI_FUNCTION_IRQ(0x6, 14)),		/* EINT14 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* MCLK */
+		  SUNXI_FUNCTION(0x4, "spi2"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ(0x6, 15)),		/* EINT15 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x4, "spi2")),		/* MOSI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x4, "spi2")),		/* MISO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D0 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D1 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D2 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D3 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D4 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D5 */
+		  SUNXI_FUNCTION(0x4, "mmc2")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D6 */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "csi0"),		/* D7 */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* RX */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x4, "mmc0")),		/* D1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x4, "mmc0")),		/* D0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x4, "mmc0")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x4, "mmc0")),		/* CMD */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x4, "mmc0")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x4, "mmc0")),		/* D2 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION_IRQ(0x6, 0)),		/* EINT0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION_IRQ(0x6, 1)),		/* EINT1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION_IRQ(0x6, 2)),		/* EINT2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* CMD */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 3)),		/* EINT3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* CLK */
+		  SUNXI_FUNCTION(0x4, "uart1"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 4)),		/* EINT4 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* CS0 */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* TX */
+		  SUNXI_FUNCTION_IRQ(0x6, 9)),		/* EINT9 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* RX */
+		  SUNXI_FUNCTION_IRQ(0x6, 10)),		/* EINT10 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* MOSI */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* CTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 11)),		/* EINT11 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG12,
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "spi1"),		/* MISO */
+		  SUNXI_FUNCTION(0x3, "uart3"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ(0x6, 12)),		/* EINT12 */
+};
+
+static const struct sunxi_pinctrl_desc sun4i_a10_pinctrl_data = {
+	.pins = sun4i_a10_pins,
+	.npins = ARRAY_SIZE(sun4i_a10_pins),
+};
+
+static const struct sunxi_pinctrl_desc sun5i_a10s_pinctrl_data = {
+	.pins = sun5i_a10s_pins,
+	.npins = ARRAY_SIZE(sun5i_a10s_pins),
+};
+
+static const struct sunxi_pinctrl_desc sun5i_a13_pinctrl_data = {
+	.pins = sun5i_a13_pins,
+	.npins = ARRAY_SIZE(sun5i_a13_pins),
+};
+
+#endif /* __PINCTRL_SUNXI_PINS_H */
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
index b7d8c890514..c47fd1e5450 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -13,10 +13,12 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinctrl.h>
@@ -27,1319 +29,7 @@
 
 #include "core.h"
 #include "pinctrl-sunxi.h"
-
-static const struct sunxi_desc_pin sun4i_a10_pins[] = {
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ERXD3 */
-		SUNXI_FUNCTION(0x3, "spi1"),		/* CS0 */
-		SUNXI_FUNCTION(0x4, "uart2")),		/* RTS */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ERXD2 */
-		SUNXI_FUNCTION(0x3, "spi1"),		/* CLK */
-		SUNXI_FUNCTION(0x4, "uart2")),		/* CTS */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ERXD1 */
-		SUNXI_FUNCTION(0x3, "spi1"),		/* MOSI */
-		SUNXI_FUNCTION(0x4, "uart2")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ERXD0 */
-		SUNXI_FUNCTION(0x3, "spi1"),		/* MISO */
-		SUNXI_FUNCTION(0x4, "uart2")),		/* RX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ETXD3 */
-		SUNXI_FUNCTION(0x3, "spi1")),		/* CS1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ETXD2 */
-		SUNXI_FUNCTION(0x3, "spi3")),		/* CS0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ETXD1 */
-		SUNXI_FUNCTION(0x3, "spi3")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ETXD0 */
-		SUNXI_FUNCTION(0x3, "spi3")),		/* MOSI */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ERXCK */
-		SUNXI_FUNCTION(0x3, "spi3")),		/* MISO */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ERXERR */
-		SUNXI_FUNCTION(0x3, "spi3")),		/* CS1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ERXDV */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* EMDC */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* RX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* EMDIO */
-		SUNXI_FUNCTION(0x3, "uart6"),		/* TX */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* RTS */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA13,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ETXEN */
-		SUNXI_FUNCTION(0x3, "uart6"),		/* RX */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* CTS */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA14,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ETXCK */
-		SUNXI_FUNCTION(0x3, "uart7"),		/* TX */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* DTR */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ECRS */
-		SUNXI_FUNCTION(0x3, "uart7"),		/* RX */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* DSR */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA16,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ECOL */
-		SUNXI_FUNCTION(0x3, "can"),		/* TX */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* DCD */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PA17,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "emac"),		/* ETXERR */
-		SUNXI_FUNCTION(0x3, "can"),		/* RX */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* RING */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c0")),		/* SCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c0")),		/* SDA */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "pwm")),		/* PWM0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ir0")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ir0")),		/* RX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2s"),		/* MCLK */
-		SUNXI_FUNCTION(0x3, "ac97")),		/* MCLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2s"),		/* BCLK */
-		SUNXI_FUNCTION(0x3, "ac97")),		/* BCLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2s"),		/* LRCK */
-		SUNXI_FUNCTION(0x3, "ac97")),		/* SYNC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2s"),		/* DO0 */
-		SUNXI_FUNCTION(0x3, "ac97")),		/* DO */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2s")),		/* DO1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2s")),		/* DO2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2s")),		/* DO3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2s"),		/* DI */
-		SUNXI_FUNCTION(0x3, "ac97")),		/* DI */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB13,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi2")),		/* CS1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB14,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi2"),		/* CS0 */
-		SUNXI_FUNCTION(0x3, "jtag")),		/* MS0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi2"),		/* CLK */
-		SUNXI_FUNCTION(0x3, "jtag")),		/* CK0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi2"),		/* MOSI */
-		SUNXI_FUNCTION(0x3, "jtag")),		/* DO0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi2"),		/* MISO */
-		SUNXI_FUNCTION(0x3, "jtag")),		/* DI0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c1")),		/* SCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB19,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c1")),		/* SDA */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB20,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c2")),		/* SCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB21,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c2")),		/* SDA */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB22,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "uart0"),		/* TX */
-		SUNXI_FUNCTION(0x3, "ir1")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB23,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "uart0"),		/* RX */
-		SUNXI_FUNCTION(0x3, "ir1")),		/* RX */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NWE */
-		SUNXI_FUNCTION(0x3, "spi0")),		/* MOSI */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NALE */
-		SUNXI_FUNCTION(0x3, "spi0")),		/* MISO */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NCLE */
-		SUNXI_FUNCTION(0x3, "spi0")),		/* SCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NCE1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NCE0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),	/* NRE# */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NRB0 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* CMD */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NRB1 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ0 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ1 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ2 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ3 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NDQ4 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NDQ5 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NDQ6 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NDQ7 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC16,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NWP */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC17,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NCE2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC18,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NCE3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NCE4 */
-		SUNXI_FUNCTION(0x3, "spi2")),		/* CS0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC20,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NCE5 */
-		SUNXI_FUNCTION(0x3, "spi2")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC21,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NCE6 */
-		SUNXI_FUNCTION(0x3, "spi2")),		/* MOSI */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC22,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NCE7 */
-		SUNXI_FUNCTION(0x3, "spi2")),		/* MISO */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC23,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "spi0")),		/* CS0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC24,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NDQS */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D0 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VP0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D1 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VN0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D2 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VP1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D3 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VN1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D4 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VP2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D5 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VN2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D6 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VPC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D7 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VNC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D8 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VP3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D9 */
-		SUNXI_FUNCTION(0x3, "lvds0")),		/* VM3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D10 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VP0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D11 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VN0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D12 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VP1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D13 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VN1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D14 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VP2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D15 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VN2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD16,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D16 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VPC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD17,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D17 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VNC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D18 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VP3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D19 */
-		SUNXI_FUNCTION(0x3, "lvds1")),		/* VN3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D20 */
-		SUNXI_FUNCTION(0x3, "csi1")),		/* MCLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D21 */
-		SUNXI_FUNCTION(0x3, "sim")),		/* VPPEN */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D22 */
-		SUNXI_FUNCTION(0x3, "sim")),		/* VPPPP */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* D23 */
-		SUNXI_FUNCTION(0x3, "sim")),		/* DET */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* CLK */
-		SUNXI_FUNCTION(0x3, "sim")),		/* VCCEN */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* DE */
-		SUNXI_FUNCTION(0x3, "sim")),		/* RST */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* HSYNC */
-		SUNXI_FUNCTION(0x3, "sim")),		/* SCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0"),		/* VSYNC */
-		SUNXI_FUNCTION(0x3, "sim")),		/* SDA */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* CLK */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* PCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* ERR */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* CK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* SYNC */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* HSYNC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* DVLD */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* VSYNC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* D0 */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* D0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* D1 */
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D1 */
-		SUNXI_FUNCTION(0x4, "sim")),		/* VPPEN */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* D2 */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* D2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* D3 */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* D3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* D4 */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* D4 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* D5 */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* D5 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* D6 */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* D6 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts0"),		/* D7 */
-		SUNXI_FUNCTION(0x3, "csi0")),		/* D7 */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc0"),		/* D1 */
-		SUNXI_FUNCTION(0x4, "jtag")),		/* MSI */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc0"),		/* D0 */
-		SUNXI_FUNCTION(0x4, "jtag")),		/* DI1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc0"),		/* CLK */
-		SUNXI_FUNCTION(0x4, "uart0")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc0"),		/* CMD */
-		SUNXI_FUNCTION(0x4, "jtag")),		/* DO1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc0"),		/* D3 */
-		SUNXI_FUNCTION(0x4, "uart0")),		/* RX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc0"),		/* D2 */
-		SUNXI_FUNCTION(0x4, "jtag")),		/* CK1 */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* CLK */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* PCK */
-		SUNXI_FUNCTION(0x4, "mmc1")),		/* CMD */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* ERR */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* CK */
-		SUNXI_FUNCTION(0x4, "mmc1")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* SYNC */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* HSYNC */
-		SUNXI_FUNCTION(0x4, "mmc1")),		/* D0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* DVLD */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* VSYNC */
-		SUNXI_FUNCTION(0x4, "mmc1")),		/* D1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* D0 */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* D0 */
-		SUNXI_FUNCTION(0x4, "mmc1"),		/* D2 */
-		SUNXI_FUNCTION(0x5, "csi0")),		/* D8 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* D1 */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* D1 */
-		SUNXI_FUNCTION(0x4, "mmc1"),		/* D3 */
-		SUNXI_FUNCTION(0x5, "csi0")),		/* D9 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* D2 */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* D2 */
-		SUNXI_FUNCTION(0x4, "uart3"),		/* TX */
-		SUNXI_FUNCTION(0x5, "csi0")),		/* D10 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* D3 */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* D3 */
-		SUNXI_FUNCTION(0x4, "uart3"),		/* RX */
-		SUNXI_FUNCTION(0x5, "csi0")),		/* D11 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* D4 */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* D4 */
-		SUNXI_FUNCTION(0x4, "uart3"),		/* RTS */
-		SUNXI_FUNCTION(0x5, "csi0")),		/* D12 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* D5 */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* D5 */
-		SUNXI_FUNCTION(0x4, "uart3"),		/* CTS */
-		SUNXI_FUNCTION(0x5, "csi0")),		/* D13 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* D6 */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* D6 */
-		SUNXI_FUNCTION(0x4, "uart4"),		/* TX */
-		SUNXI_FUNCTION(0x5, "csi0")),		/* D14 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ts1"),		/* D7 */
-		SUNXI_FUNCTION(0x3, "csi1"),		/* D7 */
-		SUNXI_FUNCTION(0x4, "uart4"),		/* RX */
-		SUNXI_FUNCTION(0x5, "csi0")),		/* D15 */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D0 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAA0 */
-		SUNXI_FUNCTION(0x4, "uart3"),		/* TX */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D1 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAA1 */
-		SUNXI_FUNCTION(0x4, "uart3"),		/* RX */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D2 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAA2 */
-		SUNXI_FUNCTION(0x4, "uart3"),		/* RTS */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D3 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAIRQ */
-		SUNXI_FUNCTION(0x4, "uart3"),		/* CTS */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D4 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD0 */
-		SUNXI_FUNCTION(0x4, "uart4"),		/* TX */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D4 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D5 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD1 */
-		SUNXI_FUNCTION(0x4, "uart4"),		/* RX */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D5 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D6 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD2 */
-		SUNXI_FUNCTION(0x4, "uart5"),		/* TX */
-		SUNXI_FUNCTION(0x5, "ms"),		/* BS */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D6 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D7 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD3 */
-		SUNXI_FUNCTION(0x4, "uart5"),		/* RX */
-		SUNXI_FUNCTION(0x5, "ms"),		/* CLK */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D7 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D8 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD4 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* IN0 */
-		SUNXI_FUNCTION(0x5, "ms"),		/* D0 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D8 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D9 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD5 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* IN1 */
-		SUNXI_FUNCTION(0x5, "ms"),		/* D1 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D9 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D10 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD6 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* IN2 */
-		SUNXI_FUNCTION(0x5, "ms"),		/* D2 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D10 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D11 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD7 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* IN3 */
-		SUNXI_FUNCTION(0x5, "ms"),		/* D3 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D11 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D12 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD8 */
-		SUNXI_FUNCTION(0x4, "ps2"),		/* SCK1 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D12 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH13,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D13 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD9 */
-		SUNXI_FUNCTION(0x4, "ps2"),		/* SDA1 */
-		SUNXI_FUNCTION(0x5, "sim"),		/* RST */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D13 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH14,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D14 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD10 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* IN4 */
-		SUNXI_FUNCTION(0x5, "sim"),		/* VPPEN */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D14 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D15 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD11 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* IN5 */
-		SUNXI_FUNCTION(0x5, "sim"),		/* VPPPP */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D15 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH16,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D16 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD12 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* IN6 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D16 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH17,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D17 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD13 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* IN7 */
-		SUNXI_FUNCTION(0x5, "sim"),		/* VCCEN */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D17 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH18,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D18 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD14 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* OUT0 */
-		SUNXI_FUNCTION(0x5, "sim"),		/* SCK */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D18 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH19,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D19 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAD15 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* OUT1 */
-		SUNXI_FUNCTION(0x5, "sim"),		/* SDA */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D19 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH20,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D20 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAOE */
-		SUNXI_FUNCTION(0x4, "can"),		/* TX */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D20 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH21,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D21 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATADREQ */
-		SUNXI_FUNCTION(0x4, "can"),		/* RX */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D21 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH22,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D22 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATADACK */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* OUT2 */
-		SUNXI_FUNCTION(0x5, "mmc1"),		/* CMD */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D22 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH23,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* D23 */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATACS0 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* OUT3 */
-		SUNXI_FUNCTION(0x5, "mmc1"),		/* CLK */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* D23 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH24,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* CLK */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATACS1 */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* OUT4 */
-		SUNXI_FUNCTION(0x5, "mmc1"),		/* D0 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* PCLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH25,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* DE */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAIORDY */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* OUT5 */
-		SUNXI_FUNCTION(0x5, "mmc1"),		/* D1 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* FIELD */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH26,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* HSYNC */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAIOR */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* OUT6 */
-		SUNXI_FUNCTION(0x5, "mmc1"),		/* D2 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* HSYNC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PH27,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd1"),		/* VSYNC */
-		SUNXI_FUNCTION(0x3, "pata"),		/* ATAIOW */
-		SUNXI_FUNCTION(0x4, "keypad"),		/* OUT7 */
-		SUNXI_FUNCTION(0x5, "mmc1"),		/* D3 */
-		SUNXI_FUNCTION(0x7, "csi1")),		/* VSYNC */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out")),
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out")),
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out")),
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "pwm")),		/* PWM1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc3")),		/* CMD */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc3")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc3")),		/* D0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc3")),		/* D1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc3")),		/* D2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc3")),		/* D3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi0"),		/* CS0 */
-		SUNXI_FUNCTION(0x3, "uart5")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi0"),		/* CLK */
-		SUNXI_FUNCTION(0x3, "uart5")),		/* RX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi0"),		/* MOSI */
-		SUNXI_FUNCTION(0x3, "uart6")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI13,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi0"),		/* MISO */
-		SUNXI_FUNCTION(0x3, "uart6")),		/* RX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI14,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi0"),		/* CS1 */
-		SUNXI_FUNCTION(0x3, "ps2"),		/* SCK1 */
-		SUNXI_FUNCTION(0x4, "timer4")),		/* TCLKIN0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* CS1 */
-		SUNXI_FUNCTION(0x3, "ps2"),		/* SDA1 */
-		SUNXI_FUNCTION(0x4, "timer5")),		/* TCLKIN1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI16,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* CS0 */
-		SUNXI_FUNCTION(0x3, "uart2")),		/* RTS */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI17,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* CLK */
-		SUNXI_FUNCTION(0x3, "uart2")),		/* CTS */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI18,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* MOSI */
-		SUNXI_FUNCTION(0x3, "uart2")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI19,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* MISO */
-		SUNXI_FUNCTION(0x3, "uart2")),		/* RX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI20,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ps2"),		/* SCK0 */
-		SUNXI_FUNCTION(0x3, "uart7"),		/* TX */
-		SUNXI_FUNCTION(0x4, "hdmi")),		/* HSCL */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI21,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ps2"),		/* SDA0 */
-		SUNXI_FUNCTION(0x3, "uart7"),		/* RX */
-		SUNXI_FUNCTION(0x4, "hdmi")),		/* HSDA */
-};
-
-static const struct sunxi_desc_pin sun5i_a13_pins[] = {
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c0")),		/* SCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c0")),		/* SDA */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "pwm")),
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ir0")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "ir0")),		/* RX */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi2")),		/* CS1 */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c1")),		/* SCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c1")),		/* SDA */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c2")),		/* SCK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "i2c2")),		/* SDA */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NWE */
-		SUNXI_FUNCTION(0x3, "spi0")),		/* MOSI */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NALE */
-		SUNXI_FUNCTION(0x3, "spi0")),		/* MISO */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NCLE */
-		SUNXI_FUNCTION(0x3, "spi0")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NCE1 */
-		SUNXI_FUNCTION(0x3, "spi0")),		/* CS0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NCE0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0")),		/* NRE */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NRB0 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* CMD */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NRB1 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ0 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ1 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ2 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ3 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ4 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D4 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ5 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D5 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ6 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D6 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQ7 */
-		SUNXI_FUNCTION(0x3, "mmc2")),		/* D7 */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "nand0"),		/* NDQS */
-		SUNXI_FUNCTION(0x4, "uart3")),		/* RTS */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D4 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D5 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D6 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D7 */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D10 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D11 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D12 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D13 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D14 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D15 */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D18 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D19 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D20 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D21 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D22 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* D23 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* DE */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* HSYNC */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "lcd0")),		/* VSYNC */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* PCLK */
-		SUNXI_FUNCTION(0x4, "spi2")),		/* CS0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* MCLK */
-		SUNXI_FUNCTION(0x4, "spi2")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* HSYNC */
-		SUNXI_FUNCTION(0x4, "spi2")),		/* MOSI */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* VSYNC */
-		SUNXI_FUNCTION(0x4, "spi2")),		/* MISO */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D0 */
-		SUNXI_FUNCTION(0x4, "mmc2")),		/* D0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D1 */
-		SUNXI_FUNCTION(0x4, "mmc2")),		/* D1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D2 */
-		SUNXI_FUNCTION(0x4, "mmc2")),		/* D2 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D3 */
-		SUNXI_FUNCTION(0x4, "mmc2")),		/* D3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D4 */
-		SUNXI_FUNCTION(0x4, "mmc2")),		/* CMD */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D5 */
-		SUNXI_FUNCTION(0x4, "mmc2")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D6 */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x3, "csi0"),		/* D7 */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* RX */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x4, "mmc0")),		/* D1 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x4, "mmc0")),		/* D0 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x4, "mmc0")),		/* CLK */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x4, "mmc0")),		/* CMD */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x4, "mmc0")),		/* D3 */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x4, "mmc0")),		/* D2 */
-	/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out")),
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out")),
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out")),
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc1"),		/* CMD */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "mmc1"),		/* CLK */
-		SUNXI_FUNCTION(0x4, "uart1")),		/* RX */
-/* Hole */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* CS0 */
-		SUNXI_FUNCTION(0x3, "uart3")),		/* TX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* CLK */
-		SUNXI_FUNCTION(0x3, "uart3")),		/* RX */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* MOSI */
-		SUNXI_FUNCTION(0x3, "uart3")),		/* CTS */
-	SUNXI_PIN(SUNXI_PINCTRL_PIN_PG12,
-		SUNXI_FUNCTION(0x0, "gpio_in"),
-		SUNXI_FUNCTION(0x1, "gpio_out"),
-		SUNXI_FUNCTION(0x2, "spi1"),		/* MISO */
-		SUNXI_FUNCTION(0x3, "uart3")),		/* RTS */
-};
-
-static const struct sunxi_pinctrl_desc sun4i_a10_pinctrl_data = {
-	.pins = sun4i_a10_pins,
-	.npins = ARRAY_SIZE(sun4i_a10_pins),
-};
-
-static const struct sunxi_pinctrl_desc sun5i_a13_pinctrl_data = {
-	.pins = sun5i_a13_pins,
-	.npins = ARRAY_SIZE(sun5i_a13_pins),
-};
+#include "pinctrl-sunxi-pins.h"
 
 static struct sunxi_pinctrl_group *
 sunxi_pinctrl_find_group_by_name(struct sunxi_pinctrl *pctl, const char *group)
@@ -1399,6 +89,31 @@ sunxi_pinctrl_desc_find_function_by_name(struct sunxi_pinctrl *pctl,
 	return NULL;
 }
 
+static struct sunxi_desc_function *
+sunxi_pinctrl_desc_find_function_by_pin(struct sunxi_pinctrl *pctl,
+					const u16 pin_num,
+					const char *func_name)
+{
+	int i;
+
+	for (i = 0; i < pctl->desc->npins; i++) {
+		const struct sunxi_desc_pin *pin = pctl->desc->pins + i;
+
+		if (pin->pin.number == pin_num) {
+			struct sunxi_desc_function *func = pin->functions;
+
+			while (func->name) {
+				if (!strcmp(func->name, func_name))
+					return func;
+
+				func++;
+			}
+		}
+	}
+
+	return NULL;
+}
+
 static int sunxi_pctrl_get_groups_count(struct pinctrl_dev *pctldev)
 {
 	struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
@@ -1680,37 +395,20 @@ sunxi_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 {
 	struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
 	struct sunxi_desc_function *desc;
-	char pin_name[SUNXI_PIN_NAME_MAX_LEN];
 	const char *func;
-	u8 bank, pin;
-	int ret;
-
-	bank = (offset) / PINS_PER_BANK;
-	pin = (offset) % PINS_PER_BANK;
-
-	ret = sprintf(pin_name, "P%c%d", 'A' + bank, pin);
-	if (!ret)
-		goto error;
 
 	if (input)
 		func = "gpio_in";
 	else
 		func = "gpio_out";
 
-	desc = sunxi_pinctrl_desc_find_function_by_name(pctl,
-							pin_name,
-							func);
-	if (!desc) {
-		ret = -EINVAL;
-		goto error;
-	}
+	desc = sunxi_pinctrl_desc_find_function_by_pin(pctl, offset, func);
+	if (!desc)
+		return -EINVAL;
 
 	sunxi_pmx_set(pctldev, offset, desc->muxval);
 
-	ret = 0;
-
-error:
-	return ret;
+	return 0;
 }
 
 static const struct pinmux_ops sunxi_pmx_ops = {
@@ -1788,6 +486,26 @@ static int sunxi_pinctrl_gpio_of_xlate(struct gpio_chip *gc,
 	return pin;
 }
 
+static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct sunxi_pinctrl *pctl = dev_get_drvdata(chip->dev);
+	struct sunxi_desc_function *desc;
+
+	if (offset > chip->ngpio)
+		return -ENXIO;
+
+	desc = sunxi_pinctrl_desc_find_function_by_pin(pctl, offset, "irq");
+	if (!desc)
+		return -EINVAL;
+
+	pctl->irq_array[desc->irqnum] = offset;
+
+	dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
+		chip->label, offset + chip->base, desc->irqnum);
+
+	return irq_find_mapping(pctl->domain, desc->irqnum);
+}
+
 static struct gpio_chip sunxi_pinctrl_gpio_chip = {
 	.owner			= THIS_MODULE,
 	.request		= sunxi_pinctrl_gpio_request,
@@ -1797,12 +515,121 @@ static struct gpio_chip sunxi_pinctrl_gpio_chip = {
 	.get			= sunxi_pinctrl_gpio_get,
 	.set			= sunxi_pinctrl_gpio_set,
 	.of_xlate		= sunxi_pinctrl_gpio_of_xlate,
+	.to_irq			= sunxi_pinctrl_gpio_to_irq,
 	.of_gpio_n_cells	= 3,
 	.can_sleep		= 0,
 };
 
+static int sunxi_pinctrl_irq_set_type(struct irq_data *d,
+				      unsigned int type)
+{
+	struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
+	u32 reg = sunxi_irq_cfg_reg(d->hwirq);
+	u8 index = sunxi_irq_cfg_offset(d->hwirq);
+	u8 mode;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		mode = IRQ_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		mode = IRQ_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		mode = IRQ_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		mode = IRQ_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		mode = IRQ_LEVEL_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel((mode & IRQ_CFG_IRQ_MASK) << index, pctl->membase + reg);
+
+	return 0;
+}
+
+static void sunxi_pinctrl_irq_mask_ack(struct irq_data *d)
+{
+	struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
+	u32 ctrl_reg = sunxi_irq_ctrl_reg(d->hwirq);
+	u8 ctrl_idx = sunxi_irq_ctrl_offset(d->hwirq);
+	u32 status_reg = sunxi_irq_status_reg(d->hwirq);
+	u8 status_idx = sunxi_irq_status_offset(d->hwirq);
+	u32 val;
+
+	/* Mask the IRQ */
+	val = readl(pctl->membase + ctrl_reg);
+	writel(val & ~(1 << ctrl_idx), pctl->membase + ctrl_reg);
+
+	/* Clear the IRQ */
+	writel(1 << status_idx, pctl->membase + status_reg);
+}
+
+static void sunxi_pinctrl_irq_mask(struct irq_data *d)
+{
+	struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
+	u32 reg = sunxi_irq_ctrl_reg(d->hwirq);
+	u8 idx = sunxi_irq_ctrl_offset(d->hwirq);
+	u32 val;
+
+	/* Mask the IRQ */
+	val = readl(pctl->membase + reg);
+	writel(val & ~(1 << idx), pctl->membase + reg);
+}
+
+static void sunxi_pinctrl_irq_unmask(struct irq_data *d)
+{
+	struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
+	struct sunxi_desc_function *func;
+	u32 reg = sunxi_irq_ctrl_reg(d->hwirq);
+	u8 idx = sunxi_irq_ctrl_offset(d->hwirq);
+	u32 val;
+
+	func = sunxi_pinctrl_desc_find_function_by_pin(pctl,
+						       pctl->irq_array[d->hwirq],
+						       "irq");
+
+	/* Change muxing to INT mode */
+	sunxi_pmx_set(pctl->pctl_dev, pctl->irq_array[d->hwirq], func->muxval);
+
+	/* Unmask the IRQ */
+	val = readl(pctl->membase + reg);
+	writel(val | (1 << idx), pctl->membase + reg);
+}
+
+static struct irq_chip sunxi_pinctrl_irq_chip = {
+	.irq_mask	= sunxi_pinctrl_irq_mask,
+	.irq_mask_ack	= sunxi_pinctrl_irq_mask_ack,
+	.irq_unmask	= sunxi_pinctrl_irq_unmask,
+	.irq_set_type	= sunxi_pinctrl_irq_set_type,
+};
+
+static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
+	const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
+
+	/* Clear all interrupts */
+	writel(reg, pctl->membase + IRQ_STATUS_REG);
+
+	if (reg) {
+		int irqoffset;
+
+		for_each_set_bit(irqoffset, &reg, SUNXI_IRQ_NUMBER) {
+			int pin_irq = irq_find_mapping(pctl->domain, irqoffset);
+			generic_handle_irq(pin_irq);
+		}
+	}
+}
+
 static struct of_device_id sunxi_pinctrl_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-pinctrl", .data = (void *)&sun4i_a10_pinctrl_data },
+	{ .compatible = "allwinner,sun5i-a10s-pinctrl", .data = (void *)&sun5i_a10s_pinctrl_data },
 	{ .compatible = "allwinner,sun5i-a13-pinctrl", .data = (void *)&sun5i_a13_pinctrl_data },
 	{}
 };
@@ -1997,6 +824,31 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(clk);
 
+	pctl->irq = irq_of_parse_and_map(node, 0);
+	if (!pctl->irq) {
+		ret = -EINVAL;
+		goto gpiochip_error;
+	}
+
+	pctl->domain = irq_domain_add_linear(node, SUNXI_IRQ_NUMBER,
+					     &irq_domain_simple_ops, NULL);
+	if (!pctl->domain) {
+		dev_err(&pdev->dev, "Couldn't register IRQ domain\n");
+		ret = -ENOMEM;
+		goto gpiochip_error;
+	}
+
+	for (i = 0; i < SUNXI_IRQ_NUMBER; i++) {
+		int irqno = irq_create_mapping(pctl->domain, i);
+
+		irq_set_chip_and_handler(irqno, &sunxi_pinctrl_irq_chip,
+					 handle_simple_irq);
+		irq_set_chip_data(irqno, pctl);
+	};
+
+	irq_set_chained_handler(pctl->irq, sunxi_pinctrl_irq_handler);
+	irq_set_handler_data(pctl->irq, pctl);
+
 	dev_info(&pdev->dev, "initialized sunXi PIO driver\n");
 
 	return 0;
diff --git a/drivers/pinctrl/pinctrl-sunxi.h b/drivers/pinctrl/pinctrl-sunxi.h
index e921621059c..d68047d8f69 100644
--- a/drivers/pinctrl/pinctrl-sunxi.h
+++ b/drivers/pinctrl/pinctrl-sunxi.h
@@ -344,9 +344,31 @@
 #define PULL_PINS_BITS		2
 #define PULL_PINS_MASK		0x03
 
+#define SUNXI_IRQ_NUMBER	32
+
+#define IRQ_CFG_REG		0x200
+#define IRQ_CFG_IRQ_PER_REG		8
+#define IRQ_CFG_IRQ_BITS		4
+#define IRQ_CFG_IRQ_MASK		((1 << IRQ_CFG_IRQ_BITS) - 1)
+#define IRQ_CTRL_REG		0x210
+#define IRQ_CTRL_IRQ_PER_REG		32
+#define IRQ_CTRL_IRQ_BITS		1
+#define IRQ_CTRL_IRQ_MASK		((1 << IRQ_CTRL_IRQ_BITS) - 1)
+#define IRQ_STATUS_REG		0x214
+#define IRQ_STATUS_IRQ_PER_REG		32
+#define IRQ_STATUS_IRQ_BITS		1
+#define IRQ_STATUS_IRQ_MASK		((1 << IRQ_STATUS_IRQ_BITS) - 1)
+
+#define IRQ_EDGE_RISING		0x00
+#define IRQ_EDGE_FALLING	0x01
+#define IRQ_LEVEL_HIGH		0x02
+#define IRQ_LEVEL_LOW		0x03
+#define IRQ_EDGE_BOTH		0x04
+
 struct sunxi_desc_function {
 	const char	*name;
 	u8		muxval;
+	u8		irqnum;
 };
 
 struct sunxi_desc_pin {
@@ -378,10 +400,13 @@ struct sunxi_pinctrl {
 	struct gpio_chip		*chip;
 	struct sunxi_pinctrl_desc	*desc;
 	struct device			*dev;
+	struct irq_domain		*domain;
 	struct sunxi_pinctrl_function	*functions;
 	unsigned			nfunctions;
 	struct sunxi_pinctrl_group	*groups;
 	unsigned			ngroups;
+	int				irq;
+	int				irq_array[SUNXI_IRQ_NUMBER];
 	struct pinctrl_dev		*pctl_dev;
 };
 
@@ -398,6 +423,13 @@ struct sunxi_pinctrl {
 		.muxval = _val,					\
 	}
 
+#define SUNXI_FUNCTION_IRQ(_val, _irq)				\
+	{							\
+		.name = "irq",					\
+		.muxval = _val,					\
+		.irqnum = _irq,					\
+	}
+
 /*
  * The sunXi PIO registers are organized as is:
  * 0x00 - 0x0c	Muxing values.
@@ -475,4 +507,40 @@ static inline u32 sunxi_pull_offset(u16 pin)
 	return pin_num * PULL_PINS_BITS;
 }
 
+static inline u32 sunxi_irq_cfg_reg(u16 irq)
+{
+	u8 reg = irq / IRQ_CFG_IRQ_PER_REG;
+	return reg + IRQ_CFG_REG;
+}
+
+static inline u32 sunxi_irq_cfg_offset(u16 irq)
+{
+	u32 irq_num = irq % IRQ_CFG_IRQ_PER_REG;
+	return irq_num * IRQ_CFG_IRQ_BITS;
+}
+
+static inline u32 sunxi_irq_ctrl_reg(u16 irq)
+{
+	u8 reg = irq / IRQ_CTRL_IRQ_PER_REG;
+	return reg + IRQ_CTRL_REG;
+}
+
+static inline u32 sunxi_irq_ctrl_offset(u16 irq)
+{
+	u32 irq_num = irq % IRQ_CTRL_IRQ_PER_REG;
+	return irq_num * IRQ_CTRL_IRQ_BITS;
+}
+
+static inline u32 sunxi_irq_status_reg(u16 irq)
+{
+	u8 reg = irq / IRQ_STATUS_IRQ_PER_REG;
+	return reg + IRQ_STATUS_REG;
+}
+
+static inline u32 sunxi_irq_status_offset(u16 irq)
+{
+	u32 irq_num = irq % IRQ_STATUS_IRQ_PER_REG;
+	return irq_num * IRQ_STATUS_IRQ_BITS;
+}
+
 #endif /* __PINCTRL_SUNXI_H */
diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c
new file mode 100644
index 00000000000..d4f12cc556b
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c
@@ -0,0 +1,1024 @@
+/*
+ * Pinctrl driver for the Toumaz Xenif TZ1090 PowerDown Controller pins
+ *
+ * Copyright (c) 2013, Imagination Technologies Ltd.
+ *
+ * Derived from Tegra code:
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Derived from code:
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2010 NVIDIA Corporation
+ * Copyright (C) 2009-2011 ST-Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/slab.h>
+
+/*
+ * The registers may be shared with other threads/cores, so we need to use the
+ * metag global lock2 for atomicity.
+ */
+#include <asm/global_lock.h>
+
+#include "core.h"
+#include "pinconf.h"
+
+/* Register offsets from bank base address */
+#define REG_GPIO_CONTROL0	0x00
+#define REG_GPIO_CONTROL2	0x08
+
+/* Register field information */
+#define REG_GPIO_CONTROL2_PU_PD_S	16
+#define REG_GPIO_CONTROL2_PDC_POS_S	 4
+#define REG_GPIO_CONTROL2_PDC_DR_S	 2
+#define REG_GPIO_CONTROL2_PDC_SR_S	 1
+#define REG_GPIO_CONTROL2_PDC_SCHMITT_S	 0
+
+/* PU_PD field values */
+#define REG_PU_PD_TRISTATE	0
+#define REG_PU_PD_UP		1
+#define REG_PU_PD_DOWN		2
+#define REG_PU_PD_REPEATER	3
+
+/* DR field values */
+#define REG_DR_2mA		0
+#define REG_DR_4mA		1
+#define REG_DR_8mA		2
+#define REG_DR_12mA		3
+
+/**
+ * struct tz1090_pdc_function - TZ1090 PDC pinctrl mux function
+ * @name:	The name of the function, exported to pinctrl core.
+ * @groups:	An array of pin groups that may select this function.
+ * @ngroups:	The number of entries in @groups.
+ */
+struct tz1090_pdc_function {
+	const char		*name;
+	const char * const	*groups;
+	unsigned int		ngroups;
+};
+
+/**
+ * struct tz1090_pdc_pingroup - TZ1090 PDC pin group
+ * @name:	Name of pin group.
+ * @pins:	Array of pin numbers in this pin group.
+ * @npins:	Number of pins in this pin group.
+ * @func:	Function enabled by the mux.
+ * @reg:	Mux register offset.
+ * @bit:	Mux register bit.
+ * @drv:	Drive control supported, otherwise it's a mux.
+ *		This means Schmitt, Slew, and Drive strength.
+ *
+ * A representation of a group of pins (possibly just one pin) in the TZ1090
+ * PDC pin controller. Each group allows some parameter or parameters to be
+ * configured. The most common is mux function selection.
+ */
+struct tz1090_pdc_pingroup {
+	const char		*name;
+	const unsigned int	*pins;
+	unsigned int		npins;
+	int			func;
+	u16			reg;
+	u8			bit;
+	bool			drv;
+};
+
+/*
+ * All PDC pins can be GPIOs. Define these first to match how the GPIO driver
+ * names/numbers its pins.
+ */
+
+enum tz1090_pdc_pin {
+	TZ1090_PDC_PIN_GPIO0,
+	TZ1090_PDC_PIN_GPIO1,
+	TZ1090_PDC_PIN_SYS_WAKE0,
+	TZ1090_PDC_PIN_SYS_WAKE1,
+	TZ1090_PDC_PIN_SYS_WAKE2,
+	TZ1090_PDC_PIN_IR_DATA,
+	TZ1090_PDC_PIN_EXT_POWER,
+};
+
+/* Pin names */
+
+static const struct pinctrl_pin_desc tz1090_pdc_pins[] = {
+	/* PDC GPIOs */
+	PINCTRL_PIN(TZ1090_PDC_PIN_GPIO0,	"gpio0"),
+	PINCTRL_PIN(TZ1090_PDC_PIN_GPIO1,	"gpio1"),
+	PINCTRL_PIN(TZ1090_PDC_PIN_SYS_WAKE0,	"sys_wake0"),
+	PINCTRL_PIN(TZ1090_PDC_PIN_SYS_WAKE1,	"sys_wake1"),
+	PINCTRL_PIN(TZ1090_PDC_PIN_SYS_WAKE2,	"sys_wake2"),
+	PINCTRL_PIN(TZ1090_PDC_PIN_IR_DATA,	"ir_data"),
+	PINCTRL_PIN(TZ1090_PDC_PIN_EXT_POWER,	"ext_power"),
+};
+
+/* Pin group pins */
+
+static const unsigned int gpio0_pins[] = {
+	TZ1090_PDC_PIN_GPIO0,
+};
+
+static const unsigned int gpio1_pins[] = {
+	TZ1090_PDC_PIN_GPIO1,
+};
+
+static const unsigned int pdc_pins[] = {
+	TZ1090_PDC_PIN_GPIO0,
+	TZ1090_PDC_PIN_GPIO1,
+	TZ1090_PDC_PIN_SYS_WAKE0,
+	TZ1090_PDC_PIN_SYS_WAKE1,
+	TZ1090_PDC_PIN_SYS_WAKE2,
+	TZ1090_PDC_PIN_IR_DATA,
+	TZ1090_PDC_PIN_EXT_POWER,
+};
+
+/* Mux functions */
+
+enum tz1090_pdc_mux {
+	/* PDC_GPIO0 mux */
+	TZ1090_PDC_MUX_IR_MOD_STABLE_OUT,
+	/* PDC_GPIO1 mux */
+	TZ1090_PDC_MUX_IR_MOD_POWER_OUT,
+};
+
+/* Pin groups a function can be muxed to */
+
+static const char * const gpio0_groups[] = {
+	"gpio0",
+};
+
+static const char * const gpio1_groups[] = {
+	"gpio1",
+};
+
+#define FUNCTION(mux, fname, group)			\
+	[(TZ1090_PDC_MUX_ ## mux)] = {			\
+		.name = #fname,				\
+		.groups = group##_groups,		\
+		.ngroups = ARRAY_SIZE(group##_groups),	\
+	}
+
+/* Must correlate with enum tz1090_pdc_mux */
+static const struct tz1090_pdc_function tz1090_pdc_functions[] = {
+	/*	 MUX			fn			pingroups */
+	FUNCTION(IR_MOD_STABLE_OUT,	ir_mod_stable_out,	gpio0),
+	FUNCTION(IR_MOD_POWER_OUT,	ir_mod_power_out,	gpio1),
+};
+
+/**
+ * MUX_PG() - Initialise a pin group with mux control
+ * @pg_name:	Pin group name (stringified, _pins appended to get pins array)
+ * @f0:		Function 0 (TZ1090_PDC_MUX_ is prepended)
+ * @mux_r:	Mux register (REG_PINCTRL_ is prepended)
+ * @mux_b:	Bit number in register of mux field
+ */
+#define MUX_PG(pg_name, f0, mux_r, mux_b)			\
+	{							\
+		.name = #pg_name,				\
+		.pins = pg_name##_pins,				\
+		.npins = ARRAY_SIZE(pg_name##_pins),		\
+		.func = TZ1090_PDC_MUX_ ## f0,			\
+		.reg = (REG_ ## mux_r),				\
+		.bit = (mux_b),					\
+	}
+
+/**
+ * DRV_PG() - Initialise a pin group with drive control
+ * @pg_name:	Pin group name (stringified, _pins appended to get pins array)
+ */
+#define DRV_PG(pg_name)				\
+	{							\
+		.name = #pg_name,				\
+		.pins = pg_name##_pins,				\
+		.npins = ARRAY_SIZE(pg_name##_pins),		\
+		.drv = true,					\
+	}
+
+static const struct tz1090_pdc_pingroup tz1090_pdc_groups[] = {
+	/* Muxing pin groups */
+	/*     pg_name, f0,                 mux register,  mux bit */
+	MUX_PG(gpio0,   IR_MOD_STABLE_OUT,  GPIO_CONTROL0, 7),
+	MUX_PG(gpio1,   IR_MOD_POWER_OUT,   GPIO_CONTROL0, 6),
+
+	/* Drive pin groups */
+	/*     pg_name */
+	DRV_PG(pdc),
+};
+
+/**
+ * struct tz1090_pdc_pmx - Private pinctrl data
+ * @dev:	Platform device
+ * @pctl:	Pin control device
+ * @regs:	Register region
+ * @lock:	Lock protecting coherency of mux_en and gpio_en
+ * @mux_en:	Muxes that have been enabled
+ * @gpio_en:	Muxable GPIOs that have been enabled
+ */
+struct tz1090_pdc_pmx {
+	struct device		*dev;
+	struct pinctrl_dev	*pctl;
+	void __iomem		*regs;
+	spinlock_t		lock;
+	u32			mux_en;
+	u32			gpio_en;
+};
+
+static inline u32 pmx_read(struct tz1090_pdc_pmx *pmx, u32 reg)
+{
+	return ioread32(pmx->regs + reg);
+}
+
+static inline void pmx_write(struct tz1090_pdc_pmx *pmx, u32 val, u32 reg)
+{
+	iowrite32(val, pmx->regs + reg);
+}
+
+/*
+ * Pin control operations
+ */
+
+static int tz1090_pdc_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(tz1090_pdc_groups);
+}
+
+static const char *tz1090_pdc_pinctrl_get_group_name(struct pinctrl_dev *pctl,
+						     unsigned int group)
+{
+	return tz1090_pdc_groups[group].name;
+}
+
+static int tz1090_pdc_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					     unsigned int group,
+					     const unsigned int **pins,
+					     unsigned int *num_pins)
+{
+	*pins = tz1090_pdc_groups[group].pins;
+	*num_pins = tz1090_pdc_groups[group].npins;
+
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void tz1090_pdc_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+					    struct seq_file *s,
+					    unsigned int offset)
+{
+	seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+#endif
+
+static int reserve_map(struct device *dev, struct pinctrl_map **map,
+		       unsigned int *reserved_maps, unsigned int *num_maps,
+		       unsigned int reserve)
+{
+	unsigned int old_num = *reserved_maps;
+	unsigned int new_num = *num_maps + reserve;
+	struct pinctrl_map *new_map;
+
+	if (old_num >= new_num)
+		return 0;
+
+	new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL);
+	if (!new_map) {
+		dev_err(dev, "krealloc(map) failed\n");
+		return -ENOMEM;
+	}
+
+	memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map));
+
+	*map = new_map;
+	*reserved_maps = new_num;
+
+	return 0;
+}
+
+static int add_map_mux(struct pinctrl_map **map, unsigned int *reserved_maps,
+		       unsigned int *num_maps, const char *group,
+		       const char *function)
+{
+	if (WARN_ON(*num_maps == *reserved_maps))
+		return -ENOSPC;
+
+	(*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
+	(*map)[*num_maps].data.mux.group = group;
+	(*map)[*num_maps].data.mux.function = function;
+	(*num_maps)++;
+
+	return 0;
+}
+
+/**
+ * get_group_selector() - returns the group selector for a group
+ * @pin_group: the pin group to look up
+ *
+ * This is the same as pinctrl_get_group_selector except it doesn't produce an
+ * error message if the group isn't found or debug messages.
+ */
+static int get_group_selector(const char *pin_group)
+{
+	unsigned int group;
+
+	for (group = 0; group < ARRAY_SIZE(tz1090_pdc_groups); ++group)
+		if (!strcmp(tz1090_pdc_groups[group].name, pin_group))
+			return group;
+
+	return -EINVAL;
+}
+
+static int add_map_configs(struct device *dev,
+			   struct pinctrl_map **map,
+			   unsigned int *reserved_maps, unsigned int *num_maps,
+			   const char *group, unsigned long *configs,
+			   unsigned int num_configs)
+{
+	unsigned long *dup_configs;
+	enum pinctrl_map_type type;
+
+	if (WARN_ON(*num_maps == *reserved_maps))
+		return -ENOSPC;
+
+	dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs),
+			      GFP_KERNEL);
+	if (!dup_configs) {
+		dev_err(dev, "kmemdup(configs) failed\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * We support both pins and pin groups, but we need to figure out which
+	 * one we have.
+	 */
+	if (get_group_selector(group) >= 0)
+		type = PIN_MAP_TYPE_CONFIGS_GROUP;
+	else
+		type = PIN_MAP_TYPE_CONFIGS_PIN;
+	(*map)[*num_maps].type = type;
+	(*map)[*num_maps].data.configs.group_or_pin = group;
+	(*map)[*num_maps].data.configs.configs = dup_configs;
+	(*map)[*num_maps].data.configs.num_configs = num_configs;
+	(*num_maps)++;
+
+	return 0;
+}
+
+static void tz1090_pdc_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+					   struct pinctrl_map *map,
+					   unsigned int num_maps)
+{
+	int i;
+
+	for (i = 0; i < num_maps; i++)
+		if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
+			kfree(map[i].data.configs.configs);
+
+	kfree(map);
+}
+
+static int tz1090_pdc_pinctrl_dt_subnode_to_map(struct device *dev,
+						struct device_node *np,
+						struct pinctrl_map **map,
+						unsigned int *reserved_maps,
+						unsigned int *num_maps)
+{
+	int ret;
+	const char *function;
+	unsigned long *configs = NULL;
+	unsigned int num_configs = 0;
+	unsigned int reserve;
+	struct property *prop;
+	const char *group;
+
+	ret = of_property_read_string(np, "tz1090,function", &function);
+	if (ret < 0) {
+		/* EINVAL=missing, which is fine since it's optional */
+		if (ret != -EINVAL)
+			dev_err(dev,
+				"could not parse property function\n");
+		function = NULL;
+	}
+
+	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	if (ret)
+		return ret;
+
+	reserve = 0;
+	if (function != NULL)
+		reserve++;
+	if (num_configs)
+		reserve++;
+	ret = of_property_count_strings(np, "tz1090,pins");
+	if (ret < 0) {
+		dev_err(dev, "could not parse property pins\n");
+		goto exit;
+	}
+	reserve *= ret;
+
+	ret = reserve_map(dev, map, reserved_maps, num_maps, reserve);
+	if (ret < 0)
+		goto exit;
+
+	of_property_for_each_string(np, "tz1090,pins", prop, group) {
+		if (function) {
+			ret = add_map_mux(map, reserved_maps, num_maps,
+					  group, function);
+			if (ret < 0)
+				goto exit;
+		}
+
+		if (num_configs) {
+			ret = add_map_configs(dev, map, reserved_maps,
+					      num_maps, group, configs,
+					      num_configs);
+			if (ret < 0)
+				goto exit;
+		}
+	}
+
+	ret = 0;
+
+exit:
+	kfree(configs);
+	return ret;
+}
+
+static int tz1090_pdc_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+					     struct device_node *np_config,
+					     struct pinctrl_map **map,
+					     unsigned int *num_maps)
+{
+	unsigned int reserved_maps;
+	struct device_node *np;
+	int ret;
+
+	reserved_maps = 0;
+	*map = NULL;
+	*num_maps = 0;
+
+	for_each_child_of_node(np_config, np) {
+		ret = tz1090_pdc_pinctrl_dt_subnode_to_map(pctldev->dev, np,
+							   map, &reserved_maps,
+							   num_maps);
+		if (ret < 0) {
+			tz1090_pdc_pinctrl_dt_free_map(pctldev, *map,
+						       *num_maps);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct pinctrl_ops tz1090_pdc_pinctrl_ops = {
+	.get_groups_count	= tz1090_pdc_pinctrl_get_groups_count,
+	.get_group_name		= tz1090_pdc_pinctrl_get_group_name,
+	.get_group_pins		= tz1090_pdc_pinctrl_get_group_pins,
+#ifdef CONFIG_DEBUG_FS
+	.pin_dbg_show		= tz1090_pdc_pinctrl_pin_dbg_show,
+#endif
+	.dt_node_to_map		= tz1090_pdc_pinctrl_dt_node_to_map,
+	.dt_free_map		= tz1090_pdc_pinctrl_dt_free_map,
+};
+
+/*
+ * Pin mux operations
+ */
+
+static int tz1090_pdc_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(tz1090_pdc_functions);
+}
+
+static const char *tz1090_pdc_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+						    unsigned int function)
+{
+	return tz1090_pdc_functions[function].name;
+}
+
+static int tz1090_pdc_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
+					      unsigned int function,
+					      const char * const **groups,
+					      unsigned int * const num_groups)
+{
+	*groups = tz1090_pdc_functions[function].groups;
+	*num_groups = tz1090_pdc_functions[function].ngroups;
+
+	return 0;
+}
+
+/**
+ * tz1090_pdc_pinctrl_mux() - update mux bit
+ * @pmx:		Pinmux data
+ * @grp:		Pin mux group
+ */
+static void tz1090_pdc_pinctrl_mux(struct tz1090_pdc_pmx *pmx,
+				   const struct tz1090_pdc_pingroup *grp)
+{
+	u32 reg, select;
+	unsigned int pin_shift = grp->pins[0];
+	unsigned long flags;
+
+	/* select = mux && !gpio */
+	select = ((pmx->mux_en & ~pmx->gpio_en) >> pin_shift) & 1;
+
+	/* set up the mux */
+	__global_lock2(flags);
+	reg = pmx_read(pmx, grp->reg);
+	reg &= ~BIT(grp->bit);
+	reg |= select << grp->bit;
+	pmx_write(pmx, reg, grp->reg);
+	__global_unlock2(flags);
+}
+
+static int tz1090_pdc_pinctrl_enable(struct pinctrl_dev *pctldev,
+				     unsigned int function, unsigned int group)
+{
+	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tz1090_pdc_pingroup *grp = &tz1090_pdc_groups[group];
+
+	dev_dbg(pctldev->dev, "%s(func=%u (%s), group=%u (%s))\n",
+		__func__,
+		function, tz1090_pdc_functions[function].name,
+		group, tz1090_pdc_groups[group].name);
+
+	/* is it even a mux? */
+	if (grp->drv)
+		return -EINVAL;
+
+	/* does this group even control the function? */
+	if (function != grp->func)
+		return -EINVAL;
+
+	/* record the pin being muxed and update mux bit */
+	spin_lock(&pmx->lock);
+	pmx->mux_en |= BIT(grp->pins[0]);
+	tz1090_pdc_pinctrl_mux(pmx, grp);
+	spin_unlock(&pmx->lock);
+	return 0;
+}
+
+static void tz1090_pdc_pinctrl_disable(struct pinctrl_dev *pctldev,
+				       unsigned int function,
+				       unsigned int group)
+{
+	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tz1090_pdc_pingroup *grp = &tz1090_pdc_groups[group];
+
+	dev_dbg(pctldev->dev, "%s(func=%u (%s), group=%u (%s))\n",
+		__func__,
+		function, tz1090_pdc_functions[function].name,
+		group, tz1090_pdc_groups[group].name);
+
+	/* is it even a mux? */
+	if (grp->drv)
+		return;
+
+	/* does this group even control the function? */
+	if (function != grp->func)
+		return;
+
+	/* record the pin being unmuxed and update mux bit */
+	spin_lock(&pmx->lock);
+	pmx->mux_en &= ~BIT(grp->pins[0]);
+	tz1090_pdc_pinctrl_mux(pmx, grp);
+	spin_unlock(&pmx->lock);
+}
+
+static const struct tz1090_pdc_pingroup *find_mux_group(
+						struct tz1090_pdc_pmx *pmx,
+						unsigned int pin)
+{
+	const struct tz1090_pdc_pingroup *grp;
+	unsigned int group;
+
+	grp = tz1090_pdc_groups;
+	for (group = 0; group < ARRAY_SIZE(tz1090_pdc_groups); ++group, ++grp) {
+		/* only match muxes */
+		if (grp->drv)
+			continue;
+
+		/* with a matching pin */
+		if (grp->pins[0] == pin)
+			return grp;
+	}
+
+	return NULL;
+}
+
+static int tz1090_pdc_pinctrl_gpio_request_enable(
+					struct pinctrl_dev *pctldev,
+					struct pinctrl_gpio_range *range,
+					unsigned int pin)
+{
+	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tz1090_pdc_pingroup *grp = find_mux_group(pmx, pin);
+
+	if (grp) {
+		/* record the pin in GPIO use and update mux bit */
+		spin_lock(&pmx->lock);
+		pmx->gpio_en |= BIT(pin);
+		tz1090_pdc_pinctrl_mux(pmx, grp);
+		spin_unlock(&pmx->lock);
+	}
+	return 0;
+}
+
+static void tz1090_pdc_pinctrl_gpio_disable_free(
+					struct pinctrl_dev *pctldev,
+					struct pinctrl_gpio_range *range,
+					unsigned int pin)
+{
+	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tz1090_pdc_pingroup *grp = find_mux_group(pmx, pin);
+
+	if (grp) {
+		/* record the pin not in GPIO use and update mux bit */
+		spin_lock(&pmx->lock);
+		pmx->gpio_en &= ~BIT(pin);
+		tz1090_pdc_pinctrl_mux(pmx, grp);
+		spin_unlock(&pmx->lock);
+	}
+}
+
+static struct pinmux_ops tz1090_pdc_pinmux_ops = {
+	.get_functions_count	= tz1090_pdc_pinctrl_get_funcs_count,
+	.get_function_name	= tz1090_pdc_pinctrl_get_func_name,
+	.get_function_groups	= tz1090_pdc_pinctrl_get_func_groups,
+	.enable			= tz1090_pdc_pinctrl_enable,
+	.disable		= tz1090_pdc_pinctrl_disable,
+	.gpio_request_enable	= tz1090_pdc_pinctrl_gpio_request_enable,
+	.gpio_disable_free	= tz1090_pdc_pinctrl_gpio_disable_free,
+};
+
+/*
+ * Pin config operations
+ */
+
+static int tz1090_pdc_pinconf_reg(struct pinctrl_dev *pctldev,
+				  unsigned int pin,
+				  enum pin_config_param param,
+				  bool report_err,
+				  u32 *reg, u32 *width, u32 *mask, u32 *shift,
+				  u32 *val)
+{
+	/* Find information about parameter's register */
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+		*val = REG_PU_PD_TRISTATE;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		*val = REG_PU_PD_UP;
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		*val = REG_PU_PD_DOWN;
+		break;
+	case PIN_CONFIG_BIAS_BUS_HOLD:
+		*val = REG_PU_PD_REPEATER;
+		break;
+	default:
+		return -ENOTSUPP;
+	};
+
+	/* Only input bias parameters supported */
+	*reg = REG_GPIO_CONTROL2;
+	*shift = REG_GPIO_CONTROL2_PU_PD_S + pin*2;
+	*width = 2;
+
+	/* Calculate field information */
+	*mask = (BIT(*width) - 1) << *shift;
+
+	return 0;
+}
+
+static int tz1090_pdc_pinconf_get(struct pinctrl_dev *pctldev,
+				  unsigned int pin, unsigned long *config)
+{
+	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	int ret;
+	u32 reg, width, mask, shift, val, tmp, arg;
+
+	/* Get register information */
+	ret = tz1090_pdc_pinconf_reg(pctldev, pin, param, true,
+				     &reg, &width, &mask, &shift, &val);
+	if (ret < 0)
+		return ret;
+
+	/* Extract field from register */
+	tmp = pmx_read(pmx, reg);
+	arg = ((tmp & mask) >> shift) == val;
+
+	/* Config not active */
+	if (!arg)
+		return -EINVAL;
+
+	/* And pack config */
+	*config = pinconf_to_config_packed(param, arg);
+
+	return 0;
+}
+
+static int tz1090_pdc_pinconf_set(struct pinctrl_dev *pctldev,
+				  unsigned int pin, unsigned long config)
+{
+	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(config);
+	unsigned int arg = pinconf_to_config_argument(config);
+	int ret;
+	u32 reg, width, mask, shift, val, tmp;
+	unsigned long flags;
+
+	dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n",
+		__func__, tz1090_pdc_pins[pin].name, config);
+
+	/* Get register information */
+	ret = tz1090_pdc_pinconf_reg(pctldev, pin, param, true,
+				     &reg, &width, &mask, &shift, &val);
+	if (ret < 0)
+		return ret;
+
+	/* Unpack argument and range check it */
+	if (arg > 1) {
+		dev_dbg(pctldev->dev, "%s: arg %u out of range\n",
+			__func__, arg);
+		return -EINVAL;
+	}
+
+	/* Write register field */
+	__global_lock2(flags);
+	tmp = pmx_read(pmx, reg);
+	tmp &= ~mask;
+	if (arg)
+		tmp |= val << shift;
+	pmx_write(pmx, tmp, reg);
+	__global_unlock2(flags);
+
+	return 0;
+}
+
+static const int tz1090_pdc_boolean_map[] = {
+	[0]		= -EINVAL,
+	[1]		= 1,
+};
+
+static const int tz1090_pdc_dr_map[] = {
+	[REG_DR_2mA]	= 2,
+	[REG_DR_4mA]	= 4,
+	[REG_DR_8mA]	= 8,
+	[REG_DR_12mA]	= 12,
+};
+
+static int tz1090_pdc_pinconf_group_reg(struct pinctrl_dev *pctldev,
+					const struct tz1090_pdc_pingroup *g,
+					enum pin_config_param param,
+					bool report_err, u32 *reg, u32 *width,
+					u32 *mask, u32 *shift, const int **map)
+{
+	/* Drive configuration applies in groups, but not to all groups. */
+	if (!g->drv) {
+		if (report_err)
+			dev_dbg(pctldev->dev,
+				"%s: group %s has no drive control\n",
+				__func__, g->name);
+		return -ENOTSUPP;
+	}
+
+	/* Find information about drive parameter's register */
+	*reg = REG_GPIO_CONTROL2;
+	switch (param) {
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		*shift = REG_GPIO_CONTROL2_PDC_SCHMITT_S;
+		*width = 1;
+		*map = tz1090_pdc_boolean_map;
+		break;
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		*shift = REG_GPIO_CONTROL2_PDC_DR_S;
+		*width = 2;
+		*map = tz1090_pdc_dr_map;
+		break;
+	case PIN_CONFIG_LOW_POWER_MODE:
+		*shift = REG_GPIO_CONTROL2_PDC_POS_S;
+		*width = 1;
+		*map = tz1090_pdc_boolean_map;
+		break;
+	default:
+		return -ENOTSUPP;
+	};
+
+	/* Calculate field information */
+	*mask = (BIT(*width) - 1) << *shift;
+
+	return 0;
+}
+
+static int tz1090_pdc_pinconf_group_get(struct pinctrl_dev *pctldev,
+					unsigned int group,
+					unsigned long *config)
+{
+	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tz1090_pdc_pingroup *g = &tz1090_pdc_groups[group];
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	int ret, arg;
+	u32 reg, width, mask, shift, val;
+	const int *map;
+
+	/* Get register information */
+	ret = tz1090_pdc_pinconf_group_reg(pctldev, g, param, true,
+					   &reg, &width, &mask, &shift, &map);
+	if (ret < 0)
+		return ret;
+
+	/* Extract field from register */
+	val = pmx_read(pmx, reg);
+	arg = map[(val & mask) >> shift];
+	if (arg < 0)
+		return arg;
+
+	/* And pack config */
+	*config = pinconf_to_config_packed(param, arg);
+
+	return 0;
+}
+
+static int tz1090_pdc_pinconf_group_set(struct pinctrl_dev *pctldev,
+					unsigned int group,
+					unsigned long config)
+{
+	struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tz1090_pdc_pingroup *g = &tz1090_pdc_groups[group];
+	enum pin_config_param param = pinconf_to_config_param(config);
+	const unsigned int *pit;
+	unsigned int i;
+	int ret, arg;
+	u32 reg, width, mask, shift, val;
+	unsigned long flags;
+	const int *map;
+
+	dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n",
+		__func__, g->name, config);
+
+	/* Get register information */
+	ret = tz1090_pdc_pinconf_group_reg(pctldev, g, param, true,
+					   &reg, &width, &mask, &shift, &map);
+	if (ret < 0) {
+		/*
+		 * Maybe we're trying to set a per-pin configuration of a group,
+		 * so do the pins one by one. This is mainly as a convenience.
+		 */
+		for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) {
+			ret = tz1090_pdc_pinconf_set(pctldev, *pit, config);
+			if (ret)
+				return ret;
+		}
+		return 0;
+	}
+
+	/* Unpack argument and map it to register value */
+	arg = pinconf_to_config_argument(config);
+	for (i = 0; i < BIT(width); ++i) {
+		if (map[i] == arg || (map[i] == -EINVAL && !arg)) {
+			/* Write register field */
+			__global_lock2(flags);
+			val = pmx_read(pmx, reg);
+			val &= ~mask;
+			val |= i << shift;
+			pmx_write(pmx, val, reg);
+			__global_unlock2(flags);
+			return 0;
+		}
+	}
+
+	dev_dbg(pctldev->dev, "%s: arg %u not supported\n",
+		__func__, arg);
+	return 0;
+}
+
+static struct pinconf_ops tz1090_pdc_pinconf_ops = {
+	.is_generic			= true,
+	.pin_config_get			= tz1090_pdc_pinconf_get,
+	.pin_config_set			= tz1090_pdc_pinconf_set,
+	.pin_config_group_get		= tz1090_pdc_pinconf_group_get,
+	.pin_config_group_set		= tz1090_pdc_pinconf_group_set,
+	.pin_config_config_dbg_show	= pinconf_generic_dump_config,
+};
+
+/*
+ * Pin control driver setup
+ */
+
+static struct pinctrl_desc tz1090_pdc_pinctrl_desc = {
+	.pctlops	= &tz1090_pdc_pinctrl_ops,
+	.pmxops		= &tz1090_pdc_pinmux_ops,
+	.confops	= &tz1090_pdc_pinconf_ops,
+	.owner		= THIS_MODULE,
+};
+
+static int tz1090_pdc_pinctrl_probe(struct platform_device *pdev)
+{
+	struct tz1090_pdc_pmx *pmx;
+	struct resource *res;
+
+	pmx = devm_kzalloc(&pdev->dev, sizeof(*pmx), GFP_KERNEL);
+	if (!pmx) {
+		dev_err(&pdev->dev, "Can't alloc tz1090_pdc_pmx\n");
+		return -ENOMEM;
+	}
+	pmx->dev = &pdev->dev;
+	spin_lock_init(&pmx->lock);
+
+	tz1090_pdc_pinctrl_desc.name = dev_name(&pdev->dev);
+	tz1090_pdc_pinctrl_desc.pins = tz1090_pdc_pins;
+	tz1090_pdc_pinctrl_desc.npins = ARRAY_SIZE(tz1090_pdc_pins);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing MEM resource\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     resource_size(res),
+				     dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev,
+			"Couldn't request MEM resource\n");
+		return -ENODEV;
+	}
+
+	pmx->regs = devm_ioremap(&pdev->dev, res->start,
+				 resource_size(res));
+	if (!pmx->regs) {
+		dev_err(&pdev->dev, "Couldn't ioremap regs\n");
+		return -ENODEV;
+	}
+
+	pmx->pctl = pinctrl_register(&tz1090_pdc_pinctrl_desc, &pdev->dev, pmx);
+	if (!pmx->pctl) {
+		dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, pmx);
+
+	dev_info(&pdev->dev, "TZ1090 PDC pinctrl driver initialised\n");
+
+	return 0;
+}
+
+static int tz1090_pdc_pinctrl_remove(struct platform_device *pdev)
+{
+	struct tz1090_pdc_pmx *pmx = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(pmx->pctl);
+
+	return 0;
+}
+
+static struct of_device_id tz1090_pdc_pinctrl_of_match[] = {
+	{ .compatible = "img,tz1090-pdc-pinctrl", },
+	{ },
+};
+
+static struct platform_driver tz1090_pdc_pinctrl_driver = {
+	.driver = {
+		.name		= "tz1090-pdc-pinctrl",
+		.owner		= THIS_MODULE,
+		.of_match_table	= tz1090_pdc_pinctrl_of_match,
+	},
+	.probe	= tz1090_pdc_pinctrl_probe,
+	.remove	= tz1090_pdc_pinctrl_remove,
+};
+
+static int __init tz1090_pdc_pinctrl_init(void)
+{
+	return platform_driver_register(&tz1090_pdc_pinctrl_driver);
+}
+arch_initcall(tz1090_pdc_pinctrl_init);
+
+static void __exit tz1090_pdc_pinctrl_exit(void)
+{
+	platform_driver_unregister(&tz1090_pdc_pinctrl_driver);
+}
+module_exit(tz1090_pdc_pinctrl_exit);
+
+MODULE_AUTHOR("Imagination Technologies Ltd.");
+MODULE_DESCRIPTION("Toumaz Xenif TZ1090 PDC pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, tz1090_pdc_pinctrl_of_match);
diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c
new file mode 100644
index 00000000000..4edae08a0a6
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-tz1090.c
@@ -0,0 +1,2072 @@
+/*
+ * Pinctrl driver for the Toumaz Xenif TZ1090 SoC
+ *
+ * Copyright (c) 2013, Imagination Technologies Ltd.
+ *
+ * Derived from Tegra code:
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Derived from code:
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2010 NVIDIA Corporation
+ * Copyright (C) 2009-2011 ST-Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/*
+ * The registers may be shared with other threads/cores, so we need to use the
+ * metag global lock2 for atomicity.
+ */
+#include <asm/global_lock.h>
+
+#include "core.h"
+#include "pinconf.h"
+
+/* Register offsets from bank base address */
+#define REG_PINCTRL_SELECT	0x10
+#define REG_PINCTRL_SCHMITT	0x90
+#define REG_PINCTRL_PU_PD	0xa0
+#define REG_PINCTRL_SR		0xc0
+#define REG_PINCTRL_DR		0xd0
+#define REG_PINCTRL_IF_CTL	0xe0
+
+/* REG_PINCTRL_PU_PD field values */
+#define REG_PU_PD_TRISTATE	0
+#define REG_PU_PD_UP		1
+#define REG_PU_PD_DOWN		2
+#define REG_PU_PD_REPEATER	3
+
+/* REG_PINCTRL_DR field values */
+#define REG_DR_2mA		0
+#define REG_DR_4mA		1
+#define REG_DR_8mA		2
+#define REG_DR_12mA		3
+
+/**
+ * struct tz1090_function - TZ1090 pinctrl mux function
+ * @name:	The name of the function, exported to pinctrl core.
+ * @groups:	An array of pin groups that may select this function.
+ * @ngroups:	The number of entries in @groups.
+ */
+struct tz1090_function {
+	const char		*name;
+	const char * const	*groups;
+	unsigned int		ngroups;
+};
+
+/**
+ * struct tz1090_muxdesc - TZ1090 individual mux description
+ * @funcs:	Function for each mux value.
+ * @reg:	Mux register offset. 0 if unsupported.
+ * @bit:	Mux register bit. 0 if unsupported.
+ * @width:	Mux field width. 0 if unsupported.
+ *
+ * A representation of a group of signals (possibly just one signal) in the
+ * TZ1090 which can be muxed to a set of functions or sub muxes.
+ */
+struct tz1090_muxdesc {
+	int	funcs[5];
+	u16	reg;
+	u8	bit;
+	u8	width;
+};
+
+/**
+ * struct tz1090_pingroup - TZ1090 pin group
+ * @name:	Name of pin group.
+ * @pins:	Array of pin numbers in this pin group.
+ * @npins:	Number of pins in this pin group.
+ * @mux:	Top level mux.
+ * @drv:	Drive control supported, 0 if unsupported.
+ *		This means Schmitt, Slew, and Drive strength.
+ * @slw_bit:	Slew register bit. 0 if unsupported.
+ *		The same bit is used for Schmitt, and Drive (*2).
+ * @func:	Currently muxed function.
+ * @func_count:	Number of pins using current mux function.
+ *
+ * A representation of a group of pins (possibly just one pin) in the TZ1090
+ * pin controller. Each group allows some parameter or parameters to be
+ * configured. The most common is mux function selection.
+ */
+struct tz1090_pingroup {
+	const char		*name;
+	const unsigned int	*pins;
+	unsigned int		npins;
+	struct tz1090_muxdesc	mux;
+
+	bool			drv;
+	u8			slw_bit;
+
+	int			func;
+	unsigned int		func_count;
+};
+
+/*
+ * Most pins affected by the pinmux can also be GPIOs. Define these first.
+ * These must match how the GPIO driver names/numbers its pins.
+ */
+
+enum tz1090_pin {
+	/* GPIO pins */
+	TZ1090_PIN_SDIO_CLK,
+	TZ1090_PIN_SDIO_CMD,
+	TZ1090_PIN_SDIO_D0,
+	TZ1090_PIN_SDIO_D1,
+	TZ1090_PIN_SDIO_D2,
+	TZ1090_PIN_SDIO_D3,
+	TZ1090_PIN_SDH_CD,
+	TZ1090_PIN_SDH_WP,
+	TZ1090_PIN_SPI0_MCLK,
+	TZ1090_PIN_SPI0_CS0,
+	TZ1090_PIN_SPI0_CS1,
+	TZ1090_PIN_SPI0_CS2,
+	TZ1090_PIN_SPI0_DOUT,
+	TZ1090_PIN_SPI0_DIN,
+	TZ1090_PIN_SPI1_MCLK,
+	TZ1090_PIN_SPI1_CS0,
+	TZ1090_PIN_SPI1_CS1,
+	TZ1090_PIN_SPI1_CS2,
+	TZ1090_PIN_SPI1_DOUT,
+	TZ1090_PIN_SPI1_DIN,
+	TZ1090_PIN_UART0_RXD,
+	TZ1090_PIN_UART0_TXD,
+	TZ1090_PIN_UART0_CTS,
+	TZ1090_PIN_UART0_RTS,
+	TZ1090_PIN_UART1_RXD,
+	TZ1090_PIN_UART1_TXD,
+	TZ1090_PIN_SCB0_SDAT,
+	TZ1090_PIN_SCB0_SCLK,
+	TZ1090_PIN_SCB1_SDAT,
+	TZ1090_PIN_SCB1_SCLK,
+	TZ1090_PIN_SCB2_SDAT,
+	TZ1090_PIN_SCB2_SCLK,
+	TZ1090_PIN_I2S_MCLK,
+	TZ1090_PIN_I2S_BCLK_OUT,
+	TZ1090_PIN_I2S_LRCLK_OUT,
+	TZ1090_PIN_I2S_DOUT0,
+	TZ1090_PIN_I2S_DOUT1,
+	TZ1090_PIN_I2S_DOUT2,
+	TZ1090_PIN_I2S_DIN,
+	TZ1090_PIN_PDM_A,
+	TZ1090_PIN_PDM_B,
+	TZ1090_PIN_PDM_C,
+	TZ1090_PIN_PDM_D,
+	TZ1090_PIN_TFT_RED0,
+	TZ1090_PIN_TFT_RED1,
+	TZ1090_PIN_TFT_RED2,
+	TZ1090_PIN_TFT_RED3,
+	TZ1090_PIN_TFT_RED4,
+	TZ1090_PIN_TFT_RED5,
+	TZ1090_PIN_TFT_RED6,
+	TZ1090_PIN_TFT_RED7,
+	TZ1090_PIN_TFT_GREEN0,
+	TZ1090_PIN_TFT_GREEN1,
+	TZ1090_PIN_TFT_GREEN2,
+	TZ1090_PIN_TFT_GREEN3,
+	TZ1090_PIN_TFT_GREEN4,
+	TZ1090_PIN_TFT_GREEN5,
+	TZ1090_PIN_TFT_GREEN6,
+	TZ1090_PIN_TFT_GREEN7,
+	TZ1090_PIN_TFT_BLUE0,
+	TZ1090_PIN_TFT_BLUE1,
+	TZ1090_PIN_TFT_BLUE2,
+	TZ1090_PIN_TFT_BLUE3,
+	TZ1090_PIN_TFT_BLUE4,
+	TZ1090_PIN_TFT_BLUE5,
+	TZ1090_PIN_TFT_BLUE6,
+	TZ1090_PIN_TFT_BLUE7,
+	TZ1090_PIN_TFT_VDDEN_GD,
+	TZ1090_PIN_TFT_PANELCLK,
+	TZ1090_PIN_TFT_BLANK_LS,
+	TZ1090_PIN_TFT_VSYNC_NS,
+	TZ1090_PIN_TFT_HSYNC_NR,
+	TZ1090_PIN_TFT_VD12ACB,
+	TZ1090_PIN_TFT_PWRSAVE,
+	TZ1090_PIN_TX_ON,
+	TZ1090_PIN_RX_ON,
+	TZ1090_PIN_PLL_ON,
+	TZ1090_PIN_PA_ON,
+	TZ1090_PIN_RX_HP,
+	TZ1090_PIN_GAIN0,
+	TZ1090_PIN_GAIN1,
+	TZ1090_PIN_GAIN2,
+	TZ1090_PIN_GAIN3,
+	TZ1090_PIN_GAIN4,
+	TZ1090_PIN_GAIN5,
+	TZ1090_PIN_GAIN6,
+	TZ1090_PIN_GAIN7,
+	TZ1090_PIN_ANT_SEL0,
+	TZ1090_PIN_ANT_SEL1,
+	TZ1090_PIN_SDH_CLK_IN,
+
+	/* Non-GPIO pins */
+	TZ1090_PIN_TCK,
+	TZ1090_PIN_TRST,
+	TZ1090_PIN_TDI,
+	TZ1090_PIN_TDO,
+	TZ1090_PIN_TMS,
+	TZ1090_PIN_CLK_OUT0,
+	TZ1090_PIN_CLK_OUT1,
+
+	NUM_GPIOS = TZ1090_PIN_TCK,
+};
+
+/* Pin names */
+
+static const struct pinctrl_pin_desc tz1090_pins[] = {
+	/* GPIO pins */
+	PINCTRL_PIN(TZ1090_PIN_SDIO_CLK,	"sdio_clk"),
+	PINCTRL_PIN(TZ1090_PIN_SDIO_CMD,	"sdio_cmd"),
+	PINCTRL_PIN(TZ1090_PIN_SDIO_D0,		"sdio_d0"),
+	PINCTRL_PIN(TZ1090_PIN_SDIO_D1,		"sdio_d1"),
+	PINCTRL_PIN(TZ1090_PIN_SDIO_D2,		"sdio_d2"),
+	PINCTRL_PIN(TZ1090_PIN_SDIO_D3,		"sdio_d3"),
+	PINCTRL_PIN(TZ1090_PIN_SDH_CD,		"sdh_cd"),
+	PINCTRL_PIN(TZ1090_PIN_SDH_WP,		"sdh_wp"),
+	PINCTRL_PIN(TZ1090_PIN_SPI0_MCLK,	"spi0_mclk"),
+	PINCTRL_PIN(TZ1090_PIN_SPI0_CS0,	"spi0_cs0"),
+	PINCTRL_PIN(TZ1090_PIN_SPI0_CS1,	"spi0_cs1"),
+	PINCTRL_PIN(TZ1090_PIN_SPI0_CS2,	"spi0_cs2"),
+	PINCTRL_PIN(TZ1090_PIN_SPI0_DOUT,	"spi0_dout"),
+	PINCTRL_PIN(TZ1090_PIN_SPI0_DIN,	"spi0_din"),
+	PINCTRL_PIN(TZ1090_PIN_SPI1_MCLK,	"spi1_mclk"),
+	PINCTRL_PIN(TZ1090_PIN_SPI1_CS0,	"spi1_cs0"),
+	PINCTRL_PIN(TZ1090_PIN_SPI1_CS1,	"spi1_cs1"),
+	PINCTRL_PIN(TZ1090_PIN_SPI1_CS2,	"spi1_cs2"),
+	PINCTRL_PIN(TZ1090_PIN_SPI1_DOUT,	"spi1_dout"),
+	PINCTRL_PIN(TZ1090_PIN_SPI1_DIN,	"spi1_din"),
+	PINCTRL_PIN(TZ1090_PIN_UART0_RXD,	"uart0_rxd"),
+	PINCTRL_PIN(TZ1090_PIN_UART0_TXD,	"uart0_txd"),
+	PINCTRL_PIN(TZ1090_PIN_UART0_CTS,	"uart0_cts"),
+	PINCTRL_PIN(TZ1090_PIN_UART0_RTS,	"uart0_rts"),
+	PINCTRL_PIN(TZ1090_PIN_UART1_RXD,	"uart1_rxd"),
+	PINCTRL_PIN(TZ1090_PIN_UART1_TXD,	"uart1_txd"),
+	PINCTRL_PIN(TZ1090_PIN_SCB0_SDAT,	"scb0_sdat"),
+	PINCTRL_PIN(TZ1090_PIN_SCB0_SCLK,	"scb0_sclk"),
+	PINCTRL_PIN(TZ1090_PIN_SCB1_SDAT,	"scb1_sdat"),
+	PINCTRL_PIN(TZ1090_PIN_SCB1_SCLK,	"scb1_sclk"),
+	PINCTRL_PIN(TZ1090_PIN_SCB2_SDAT,	"scb2_sdat"),
+	PINCTRL_PIN(TZ1090_PIN_SCB2_SCLK,	"scb2_sclk"),
+	PINCTRL_PIN(TZ1090_PIN_I2S_MCLK,	"i2s_mclk"),
+	PINCTRL_PIN(TZ1090_PIN_I2S_BCLK_OUT,	"i2s_bclk_out"),
+	PINCTRL_PIN(TZ1090_PIN_I2S_LRCLK_OUT,	"i2s_lrclk_out"),
+	PINCTRL_PIN(TZ1090_PIN_I2S_DOUT0,	"i2s_dout0"),
+	PINCTRL_PIN(TZ1090_PIN_I2S_DOUT1,	"i2s_dout1"),
+	PINCTRL_PIN(TZ1090_PIN_I2S_DOUT2,	"i2s_dout2"),
+	PINCTRL_PIN(TZ1090_PIN_I2S_DIN,		"i2s_din"),
+	PINCTRL_PIN(TZ1090_PIN_PDM_A,		"pdm_a"),
+	PINCTRL_PIN(TZ1090_PIN_PDM_B,		"pdm_b"),
+	PINCTRL_PIN(TZ1090_PIN_PDM_C,		"pdm_c"),
+	PINCTRL_PIN(TZ1090_PIN_PDM_D,		"pdm_d"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_RED0,	"tft_red0"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_RED1,	"tft_red1"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_RED2,	"tft_red2"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_RED3,	"tft_red3"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_RED4,	"tft_red4"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_RED5,	"tft_red5"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_RED6,	"tft_red6"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_RED7,	"tft_red7"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_GREEN0,	"tft_green0"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_GREEN1,	"tft_green1"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_GREEN2,	"tft_green2"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_GREEN3,	"tft_green3"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_GREEN4,	"tft_green4"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_GREEN5,	"tft_green5"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_GREEN6,	"tft_green6"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_GREEN7,	"tft_green7"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLUE0,	"tft_blue0"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLUE1,	"tft_blue1"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLUE2,	"tft_blue2"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLUE3,	"tft_blue3"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLUE4,	"tft_blue4"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLUE5,	"tft_blue5"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLUE6,	"tft_blue6"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLUE7,	"tft_blue7"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_VDDEN_GD,	"tft_vdden_gd"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_PANELCLK,	"tft_panelclk"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_BLANK_LS,	"tft_blank_ls"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_VSYNC_NS,	"tft_vsync_ns"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_HSYNC_NR,	"tft_hsync_nr"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_VD12ACB,	"tft_vd12acb"),
+	PINCTRL_PIN(TZ1090_PIN_TFT_PWRSAVE,	"tft_pwrsave"),
+	PINCTRL_PIN(TZ1090_PIN_TX_ON,		"tx_on"),
+	PINCTRL_PIN(TZ1090_PIN_RX_ON,		"rx_on"),
+	PINCTRL_PIN(TZ1090_PIN_PLL_ON,		"pll_on"),
+	PINCTRL_PIN(TZ1090_PIN_PA_ON,		"pa_on"),
+	PINCTRL_PIN(TZ1090_PIN_RX_HP,		"rx_hp"),
+	PINCTRL_PIN(TZ1090_PIN_GAIN0,		"gain0"),
+	PINCTRL_PIN(TZ1090_PIN_GAIN1,		"gain1"),
+	PINCTRL_PIN(TZ1090_PIN_GAIN2,		"gain2"),
+	PINCTRL_PIN(TZ1090_PIN_GAIN3,		"gain3"),
+	PINCTRL_PIN(TZ1090_PIN_GAIN4,		"gain4"),
+	PINCTRL_PIN(TZ1090_PIN_GAIN5,		"gain5"),
+	PINCTRL_PIN(TZ1090_PIN_GAIN6,		"gain6"),
+	PINCTRL_PIN(TZ1090_PIN_GAIN7,		"gain7"),
+	PINCTRL_PIN(TZ1090_PIN_ANT_SEL0,	"ant_sel0"),
+	PINCTRL_PIN(TZ1090_PIN_ANT_SEL1,	"ant_sel1"),
+	PINCTRL_PIN(TZ1090_PIN_SDH_CLK_IN,	"sdh_clk_in"),
+
+	/* Non-GPIO pins */
+	PINCTRL_PIN(TZ1090_PIN_TCK,		"tck"),
+	PINCTRL_PIN(TZ1090_PIN_TRST,		"trst"),
+	PINCTRL_PIN(TZ1090_PIN_TDI,		"tdi"),
+	PINCTRL_PIN(TZ1090_PIN_TDO,		"tdo"),
+	PINCTRL_PIN(TZ1090_PIN_TMS,		"tms"),
+	PINCTRL_PIN(TZ1090_PIN_CLK_OUT0,	"clk_out0"),
+	PINCTRL_PIN(TZ1090_PIN_CLK_OUT1,	"clk_out1"),
+};
+
+/* Pins in each pin group */
+
+static const unsigned int spi1_cs2_pins[] = {
+	TZ1090_PIN_SPI1_CS2,
+};
+
+static const unsigned int pdm_d_pins[] = {
+	TZ1090_PIN_PDM_D,
+};
+
+static const unsigned int tft_pins[] = {
+	TZ1090_PIN_TFT_RED0,
+	TZ1090_PIN_TFT_RED1,
+	TZ1090_PIN_TFT_RED2,
+	TZ1090_PIN_TFT_RED3,
+	TZ1090_PIN_TFT_RED4,
+	TZ1090_PIN_TFT_RED5,
+	TZ1090_PIN_TFT_RED6,
+	TZ1090_PIN_TFT_RED7,
+	TZ1090_PIN_TFT_GREEN0,
+	TZ1090_PIN_TFT_GREEN1,
+	TZ1090_PIN_TFT_GREEN2,
+	TZ1090_PIN_TFT_GREEN3,
+	TZ1090_PIN_TFT_GREEN4,
+	TZ1090_PIN_TFT_GREEN5,
+	TZ1090_PIN_TFT_GREEN6,
+	TZ1090_PIN_TFT_GREEN7,
+	TZ1090_PIN_TFT_BLUE0,
+	TZ1090_PIN_TFT_BLUE1,
+	TZ1090_PIN_TFT_BLUE2,
+	TZ1090_PIN_TFT_BLUE3,
+	TZ1090_PIN_TFT_BLUE4,
+	TZ1090_PIN_TFT_BLUE5,
+	TZ1090_PIN_TFT_BLUE6,
+	TZ1090_PIN_TFT_BLUE7,
+	TZ1090_PIN_TFT_VDDEN_GD,
+	TZ1090_PIN_TFT_PANELCLK,
+	TZ1090_PIN_TFT_BLANK_LS,
+	TZ1090_PIN_TFT_VSYNC_NS,
+	TZ1090_PIN_TFT_HSYNC_NR,
+	TZ1090_PIN_TFT_VD12ACB,
+	TZ1090_PIN_TFT_PWRSAVE,
+};
+
+static const unsigned int afe_pins[] = {
+	TZ1090_PIN_TX_ON,
+	TZ1090_PIN_RX_ON,
+	TZ1090_PIN_PLL_ON,
+	TZ1090_PIN_PA_ON,
+	TZ1090_PIN_RX_HP,
+	TZ1090_PIN_ANT_SEL0,
+	TZ1090_PIN_ANT_SEL1,
+	TZ1090_PIN_GAIN0,
+	TZ1090_PIN_GAIN1,
+	TZ1090_PIN_GAIN2,
+	TZ1090_PIN_GAIN3,
+	TZ1090_PIN_GAIN4,
+	TZ1090_PIN_GAIN5,
+	TZ1090_PIN_GAIN6,
+	TZ1090_PIN_GAIN7,
+};
+
+static const unsigned int sdio_pins[] = {
+	TZ1090_PIN_SDIO_CLK,
+	TZ1090_PIN_SDIO_CMD,
+	TZ1090_PIN_SDIO_D0,
+	TZ1090_PIN_SDIO_D1,
+	TZ1090_PIN_SDIO_D2,
+	TZ1090_PIN_SDIO_D3,
+};
+
+static const unsigned int sdh_pins[] = {
+	TZ1090_PIN_SDH_CD,
+	TZ1090_PIN_SDH_WP,
+	TZ1090_PIN_SDH_CLK_IN,
+};
+
+static const unsigned int spi0_pins[] = {
+	TZ1090_PIN_SPI0_MCLK,
+	TZ1090_PIN_SPI0_CS0,
+	TZ1090_PIN_SPI0_CS1,
+	TZ1090_PIN_SPI0_CS2,
+	TZ1090_PIN_SPI0_DOUT,
+	TZ1090_PIN_SPI0_DIN,
+};
+
+static const unsigned int spi1_pins[] = {
+	TZ1090_PIN_SPI1_MCLK,
+	TZ1090_PIN_SPI1_CS0,
+	TZ1090_PIN_SPI1_CS1,
+	TZ1090_PIN_SPI1_CS2,
+	TZ1090_PIN_SPI1_DOUT,
+	TZ1090_PIN_SPI1_DIN,
+};
+
+static const unsigned int uart0_pins[] = {
+	TZ1090_PIN_UART0_RTS,
+	TZ1090_PIN_UART0_CTS,
+	TZ1090_PIN_UART0_TXD,
+	TZ1090_PIN_UART0_RXD,
+};
+
+static const unsigned int uart1_pins[] = {
+	TZ1090_PIN_UART1_TXD,
+	TZ1090_PIN_UART1_RXD,
+};
+
+static const unsigned int uart_pins[] = {
+	TZ1090_PIN_UART1_TXD,
+	TZ1090_PIN_UART1_RXD,
+	TZ1090_PIN_UART0_RTS,
+	TZ1090_PIN_UART0_CTS,
+	TZ1090_PIN_UART0_TXD,
+	TZ1090_PIN_UART0_RXD,
+};
+
+static const unsigned int scb0_pins[] = {
+	TZ1090_PIN_SCB0_SDAT,
+	TZ1090_PIN_SCB0_SCLK,
+};
+
+static const unsigned int scb1_pins[] = {
+	TZ1090_PIN_SCB1_SDAT,
+	TZ1090_PIN_SCB1_SCLK,
+};
+
+static const unsigned int scb2_pins[] = {
+	TZ1090_PIN_SCB2_SDAT,
+	TZ1090_PIN_SCB2_SCLK,
+};
+
+static const unsigned int i2s_pins[] = {
+	TZ1090_PIN_I2S_MCLK,
+	TZ1090_PIN_I2S_BCLK_OUT,
+	TZ1090_PIN_I2S_LRCLK_OUT,
+	TZ1090_PIN_I2S_DOUT0,
+	TZ1090_PIN_I2S_DOUT1,
+	TZ1090_PIN_I2S_DOUT2,
+	TZ1090_PIN_I2S_DIN,
+};
+
+static const unsigned int jtag_pins[] = {
+	TZ1090_PIN_TCK,
+	TZ1090_PIN_TRST,
+	TZ1090_PIN_TDI,
+	TZ1090_PIN_TDO,
+	TZ1090_PIN_TMS,
+};
+
+/* Pins in each drive pin group */
+
+static const unsigned int drive_sdio_pins[] = {
+	TZ1090_PIN_SDIO_CLK,
+	TZ1090_PIN_SDIO_CMD,
+	TZ1090_PIN_SDIO_D0,
+	TZ1090_PIN_SDIO_D1,
+	TZ1090_PIN_SDIO_D2,
+	TZ1090_PIN_SDIO_D3,
+	TZ1090_PIN_SDH_WP,
+	TZ1090_PIN_SDH_CD,
+	TZ1090_PIN_SDH_CLK_IN,
+};
+
+static const unsigned int drive_i2s_pins[] = {
+	TZ1090_PIN_CLK_OUT1,
+	TZ1090_PIN_I2S_DIN,
+	TZ1090_PIN_I2S_DOUT0,
+	TZ1090_PIN_I2S_DOUT1,
+	TZ1090_PIN_I2S_DOUT2,
+	TZ1090_PIN_I2S_LRCLK_OUT,
+	TZ1090_PIN_I2S_BCLK_OUT,
+	TZ1090_PIN_I2S_MCLK,
+};
+
+static const unsigned int drive_scb0_pins[] = {
+	TZ1090_PIN_SCB0_SCLK,
+	TZ1090_PIN_SCB0_SDAT,
+	TZ1090_PIN_PDM_D,
+	TZ1090_PIN_PDM_C,
+};
+
+static const unsigned int drive_pdm_pins[] = {
+	TZ1090_PIN_CLK_OUT0,
+	TZ1090_PIN_PDM_B,
+	TZ1090_PIN_PDM_A,
+};
+
+/* Pin groups each function can be muxed to */
+
+/*
+ * The magic "perip" function allows otherwise non-muxing pins to be enabled in
+ * peripheral mode.
+ */
+static const char * const perip_groups[] = {
+	/* non-muxing convenient gpio pingroups */
+	"uart",
+	"uart0",
+	"uart1",
+	"spi0",
+	"spi1",
+	"scb0",
+	"scb1",
+	"scb2",
+	"i2s",
+	/* individual pins not part of a pin mux group */
+	"spi0_mclk",
+	"spi0_cs0",
+	"spi0_cs1",
+	"spi0_cs2",
+	"spi0_dout",
+	"spi0_din",
+	"spi1_mclk",
+	"spi1_cs0",
+	"spi1_cs1",
+	"spi1_dout",
+	"spi1_din",
+	"uart0_rxd",
+	"uart0_txd",
+	"uart0_cts",
+	"uart0_rts",
+	"uart1_rxd",
+	"uart1_txd",
+	"scb0_sdat",
+	"scb0_sclk",
+	"scb1_sdat",
+	"scb1_sclk",
+	"scb2_sdat",
+	"scb2_sclk",
+	"i2s_mclk",
+	"i2s_bclk_out",
+	"i2s_lrclk_out",
+	"i2s_dout0",
+	"i2s_dout1",
+	"i2s_dout2",
+	"i2s_din",
+	"pdm_a",
+	"pdm_b",
+	"pdm_c",
+};
+
+static const char * const sdh_sdio_groups[] = {
+	"sdh",
+	"sdio",
+	/* sdh pins */
+	"sdh_cd",
+	"sdh_wp",
+	"sdh_clk_in",
+	/* sdio pins */
+	"sdio_clk",
+	"sdio_cmd",
+	"sdio_d0",
+	"sdio_d1",
+	"sdio_d2",
+	"sdio_d3",
+};
+
+static const char * const spi1_cs2_groups[] = {
+	"spi1_cs2",
+};
+
+static const char * const pdm_dac_groups[] = {
+	"pdm_d",
+};
+
+static const char * const usb_vbus_groups[] = {
+	"spi1_cs2",
+	"pdm_d",
+};
+
+static const char * const afe_groups[] = {
+	"afe",
+	/* afe pins */
+	"tx_on",
+	"rx_on",
+	"pll_on",
+	"pa_on",
+	"rx_hp",
+	"ant_sel0",
+	"ant_sel1",
+	"gain0",
+	"gain1",
+	"gain2",
+	"gain3",
+	"gain4",
+	"gain5",
+	"gain6",
+	"gain7",
+};
+
+static const char * const tft_groups[] = {
+	"tft",
+	/* tft pins */
+	"tft_red0",
+	"tft_red1",
+	"tft_red2",
+	"tft_red3",
+	"tft_red4",
+	"tft_red5",
+	"tft_red6",
+	"tft_red7",
+	"tft_green0",
+	"tft_green1",
+	"tft_green2",
+	"tft_green3",
+	"tft_green4",
+	"tft_green5",
+	"tft_green6",
+	"tft_green7",
+	"tft_blue0",
+	"tft_blue1",
+	"tft_blue2",
+	"tft_blue3",
+	"tft_blue4",
+	"tft_blue5",
+	"tft_blue6",
+	"tft_blue7",
+	"tft_vdden_gd",
+	"tft_panelclk",
+	"tft_blank_ls",
+	"tft_vsync_ns",
+	"tft_hsync_nr",
+	"tft_vd12acb",
+	"tft_pwrsave",
+};
+
+/* Mux functions that can be used by a mux */
+
+enum tz1090_mux {
+	/* internal placeholder */
+	TZ1090_MUX_NA = -1,
+	/* magic per-non-muxing-GPIO-pin peripheral mode mux */
+	TZ1090_MUX_PERIP,
+	/* SDH/SDIO mux */
+	TZ1090_MUX_SDH,
+	TZ1090_MUX_SDIO,
+	/* USB_VBUS muxes */
+	TZ1090_MUX_SPI1_CS2,
+	TZ1090_MUX_PDM_DAC,
+	TZ1090_MUX_USB_VBUS,
+	/* AFE mux */
+	TZ1090_MUX_AFE,
+	TZ1090_MUX_TS_OUT_0,
+	/* EXT_DAC mux */
+	TZ1090_MUX_DAC,
+	TZ1090_MUX_NOT_IQADC_STB,
+	TZ1090_MUX_IQDAC_STB,
+	/* TFT mux */
+	TZ1090_MUX_TFT,
+	TZ1090_MUX_EXT_DAC,
+	TZ1090_MUX_TS_OUT_1,
+	TZ1090_MUX_LCD_TRACE,
+	TZ1090_MUX_PHY_RINGOSC,
+};
+
+#define FUNCTION(mux, fname, group)			\
+	[(TZ1090_MUX_ ## mux)] = {			\
+		.name = #fname,				\
+		.groups = group##_groups,		\
+		.ngroups = ARRAY_SIZE(group##_groups),	\
+	}
+/* For intermediate functions with submuxes */
+#define NULL_FUNCTION(mux, fname)			\
+	[(TZ1090_MUX_ ## mux)] = {			\
+		.name = #fname,				\
+	}
+
+/* Must correlate with enum tz1090_mux */
+static const struct tz1090_function tz1090_functions[] = {
+	/*	 FUNCTION	function name	pingroups */
+	FUNCTION(PERIP,		perip,		perip),
+	FUNCTION(SDH,		sdh,		sdh_sdio),
+	FUNCTION(SDIO,		sdio,		sdh_sdio),
+	FUNCTION(SPI1_CS2,	spi1_cs2,	spi1_cs2),
+	FUNCTION(PDM_DAC,	pdm_dac,	pdm_dac),
+	FUNCTION(USB_VBUS,	usb_vbus,	usb_vbus),
+	FUNCTION(AFE,		afe,		afe),
+	FUNCTION(TS_OUT_0,	ts_out_0,	afe),
+	FUNCTION(DAC,		ext_dac,	tft),
+	FUNCTION(NOT_IQADC_STB,	not_iqadc_stb,	tft),
+	FUNCTION(IQDAC_STB,	iqdac_stb,	tft),
+	FUNCTION(TFT,		tft,		tft),
+	NULL_FUNCTION(EXT_DAC,	_ext_dac),
+	FUNCTION(TS_OUT_1,	ts_out_1,	tft),
+	FUNCTION(LCD_TRACE,	lcd_trace,	tft),
+	FUNCTION(PHY_RINGOSC,	phy_ringosc,	tft),
+};
+
+/* Sub muxes */
+
+/**
+ * MUX() - Initialise a mux description.
+ * @f0:		Function 0 (TZ1090_MUX_ is prepended, NA for none)
+ * @f1:		Function 1 (TZ1090_MUX_ is prepended, NA for none)
+ * @f2:		Function 2 (TZ1090_MUX_ is prepended, NA for none)
+ * @f3:		Function 3 (TZ1090_MUX_ is prepended, NA for none)
+ * @f4:		Function 4 (TZ1090_MUX_ is prepended, NA for none)
+ * @mux_r:	Mux register (REG_PINCTRL_ is prepended)
+ * @mux_b:	Bit number in register that the mux field begins
+ * @mux_w:	Width of mux field in register
+ */
+#define MUX(f0, f1, f2, f3, f4, mux_r, mux_b, mux_w)		\
+	{							\
+		.funcs = {					\
+			TZ1090_MUX_ ## f0,			\
+			TZ1090_MUX_ ## f1,			\
+			TZ1090_MUX_ ## f2,			\
+			TZ1090_MUX_ ## f3,			\
+			TZ1090_MUX_ ## f4,			\
+		},						\
+		.reg = (REG_PINCTRL_ ## mux_r),			\
+		.bit = (mux_b),					\
+		.width = (mux_w),				\
+	}
+
+/**
+ * DEFINE_SUBMUX() - Defines a submux description separate from a pin group.
+ * @mux:	Mux name (_submux is appended)
+ * @f0:		Function 0 (TZ1090_MUX_ is prepended, NA for none)
+ * @f1:		Function 1 (TZ1090_MUX_ is prepended, NA for none)
+ * @f2:		Function 2 (TZ1090_MUX_ is prepended, NA for none)
+ * @f3:		Function 3 (TZ1090_MUX_ is prepended, NA for none)
+ * @f4:		Function 4 (TZ1090_MUX_ is prepended, NA for none)
+ * @mux_r:	Mux register (REG_PINCTRL_ is prepended)
+ * @mux_b:	Bit number in register that the mux field begins
+ * @mux_w:	Width of mux field in register
+ *
+ * A sub mux is a nested mux that can be bound to a magic function number used
+ * by another mux description. For example value 4 of the top level mux might
+ * correspond to a function which has a submux pointed to in tz1090_submux[].
+ * The outer mux can then take on any function in the top level mux or the
+ * submux, and if a submux function is chosen both muxes are updated to route
+ * the signal from the submux.
+ *
+ * The submux can be defined with DEFINE_SUBMUX and pointed to from
+ * tz1090_submux[] using SUBMUX.
+ */
+#define DEFINE_SUBMUX(mux, f0, f1, f2, f3, f4, mux_r, mux_b, mux_w)	\
+	static struct tz1090_muxdesc mux ## _submux =			\
+		MUX(f0, f1, f2, f3, f4, mux_r, mux_b, mux_w)
+
+/**
+ * SUBMUX() - Link a submux to a function number.
+ * @f:		Function name (TZ1090_MUX_ is prepended)
+ * @submux:	Submux name (_submux is appended)
+ *
+ * For use in tz1090_submux[] initialisation to link an intermediate function
+ * number to a particular submux description. It indicates that when the
+ * function is chosen the signal is connected to the submux.
+ */
+#define SUBMUX(f, submux)	[(TZ1090_MUX_ ## f)] = &(submux ## _submux)
+
+/**
+ * MUX_PG() - Initialise a pin group with mux control
+ * @pg_name:	Pin group name (stringified, _pins appended to get pins array)
+ * @f0:		Function 0 (TZ1090_MUX_ is prepended, NA for none)
+ * @f1:		Function 1 (TZ1090_MUX_ is prepended, NA for none)
+ * @f2:		Function 2 (TZ1090_MUX_ is prepended, NA for none)
+ * @f3:		Function 3 (TZ1090_MUX_ is prepended, NA for none)
+ * @f4:		Function 4 (TZ1090_MUX_ is prepended, NA for none)
+ * @mux_r:	Mux register (REG_PINCTRL_ is prepended)
+ * @mux_b:	Bit number in register that the mux field begins
+ * @mux_w:	Width of mux field in register
+ */
+#define MUX_PG(pg_name, f0, f1, f2, f3, f4,			\
+	       mux_r, mux_b, mux_w)				\
+	{							\
+		.name = #pg_name,				\
+		.pins = pg_name##_pins,				\
+		.npins = ARRAY_SIZE(pg_name##_pins),		\
+		.mux = MUX(f0, f1, f2, f3, f4,			\
+			   mux_r, mux_b, mux_w),		\
+	}
+
+/**
+ * SIMPLE_PG() - Initialise a simple convenience pin group
+ * @pg_name:	Pin group name (stringified, _pins appended to get pins array)
+ *
+ * A simple pin group is simply used for binding pins together so they can be
+ * referred to by a single name instead of having to list every pin
+ * individually.
+ */
+#define SIMPLE_PG(pg_name)					\
+	{							\
+		.name = #pg_name,				\
+		.pins = pg_name##_pins,				\
+		.npins = ARRAY_SIZE(pg_name##_pins),		\
+	}
+
+/**
+ * DRV_PG() - Initialise a pin group with drive control
+ * @pg_name:	Pin group name (stringified, _pins appended to get pins array)
+ * @slw_b:	Slew register bit.
+ *		The same bit is used for Schmitt, and Drive (*2).
+ */
+#define DRV_PG(pg_name, slw_b)					\
+	{							\
+		.name = #pg_name,				\
+		.pins = pg_name##_pins,				\
+		.npins = ARRAY_SIZE(pg_name##_pins),		\
+		.drv = true,					\
+		.slw_bit = (slw_b),				\
+	}
+
+/*
+ * Define main muxing pin groups
+ */
+
+/* submuxes */
+
+/*            name     f0,  f1,            f2,        f3, f4, mux r/b/w */
+DEFINE_SUBMUX(ext_dac, DAC, NOT_IQADC_STB, IQDAC_STB, NA, NA, IF_CTL, 6, 2);
+
+/* bind submuxes to internal functions */
+static struct tz1090_muxdesc *tz1090_submux[] = {
+	SUBMUX(EXT_DAC, ext_dac),
+};
+
+/*
+ * These are the pin mux groups. Pin muxing can be enabled and disabled for each
+ * pin individually so these groups are internal. The mapping of pins to pin mux
+ * group is below (tz1090_mux_pins).
+ */
+static struct tz1090_pingroup tz1090_mux_groups[] = {
+	/* Muxing pin groups */
+	/*     pg_name,  f0,       f1,       f2,       f3,        f4,          mux r/b/w */
+	MUX_PG(sdh,      SDH,      SDIO,     NA,       NA,        NA,          IF_CTL, 20, 2),
+	MUX_PG(sdio,     SDIO,     SDH,      NA,       NA,        NA,          IF_CTL, 16, 2),
+	MUX_PG(spi1_cs2, SPI1_CS2, USB_VBUS, NA,       NA,        NA,          IF_CTL, 10, 2),
+	MUX_PG(pdm_d,    PDM_DAC,  USB_VBUS, NA,       NA,        NA,          IF_CTL,  8, 2),
+	MUX_PG(afe,      AFE,      TS_OUT_0, NA,       NA,        NA,          IF_CTL,  4, 2),
+	MUX_PG(tft,      TFT,      EXT_DAC,  TS_OUT_1, LCD_TRACE, PHY_RINGOSC, IF_CTL,  0, 3),
+};
+
+/*
+ * This is the mapping from GPIO pins to pin mux groups in tz1090_mux_groups[].
+ * Pins which aren't muxable to multiple peripherals are set to
+ * TZ1090_MUX_GROUP_MAX to enable the "perip" function to enable/disable
+ * peripheral control of the pin.
+ *
+ * This array is initialised in tz1090_init_mux_pins().
+ */
+static u8 tz1090_mux_pins[NUM_GPIOS];
+
+/* TZ1090_MUX_GROUP_MAX is used in tz1090_mux_pins[] for non-muxing pins */
+#define TZ1090_MUX_GROUP_MAX ARRAY_SIZE(tz1090_mux_groups)
+
+/**
+ * tz1090_init_mux_pins() - Initialise GPIO pin to mux group mapping.
+ *
+ * Initialises the tz1090_mux_pins[] array to be the inverse of the pin lists in
+ * each pin mux group in tz1090_mux_groups[].
+ *
+ * It is assumed that no pin mux groups overlap (share pins).
+ */
+static void __init tz1090_init_mux_pins(void)
+{
+	unsigned int g, p;
+	const struct tz1090_pingroup *grp;
+	const unsigned int *pin;
+
+	for (p = 0; p < NUM_GPIOS; ++p)
+		tz1090_mux_pins[p] = TZ1090_MUX_GROUP_MAX;
+
+	grp = tz1090_mux_groups;
+	for (g = 0, grp = tz1090_mux_groups;
+	     g < ARRAY_SIZE(tz1090_mux_groups); ++g, ++grp)
+		for (pin = grp->pins, p = 0; p < grp->npins; ++p, ++pin)
+			tz1090_mux_pins[*pin] = g;
+}
+
+/*
+ * These are the externally visible pin groups. Some of them allow group control
+ * of drive configuration. Some are just simple convenience pingroups. All the
+ * internal pin mux groups in tz1090_mux_groups[] are mirrored here with the
+ * same pins.
+ * Pseudo pin groups follow in the group numbers after this array for each GPIO
+ * pin. Any group used for muxing must have all pins belonging to the same pin
+ * mux group.
+ */
+static struct tz1090_pingroup tz1090_groups[] = {
+	/* Pin groups with drive control (with no out of place pins) */
+	/*     pg_name,		slw/schmitt/drv b */
+	DRV_PG(jtag,		11 /* 11, 22 */),
+	DRV_PG(tft,		10 /* 10, 20 */),
+	DRV_PG(scb2,		9  /*  9, 18 */),
+	DRV_PG(spi0,		7  /*  7, 14 */),
+	DRV_PG(uart,		5  /*  5, 10 */),
+	DRV_PG(scb1,		4  /*  4,  8 */),
+	DRV_PG(spi1,		3  /*  3,  6 */),
+	DRV_PG(afe,		0  /*  0,  0 */),
+
+	/*
+	 * Drive specific pin groups (with odd combinations of pins which makes
+	 * the pin group naming somewhat arbitrary)
+	 */
+	/*     pg_name,		slw/schmitt/drv b */
+	DRV_PG(drive_sdio,	8  /*  8, 16 */), /* sdio_* + sdh_* */
+	DRV_PG(drive_i2s,	6  /*  6, 12 */), /* i2s_* + clk_out1 */
+	DRV_PG(drive_scb0,	2  /*  2,  4 */), /* scb0_* + pdm_{c,d} */
+	DRV_PG(drive_pdm,	1  /*  1,  2 */), /* pdm_{a,b} + clk_out0 */
+
+	/* Convenience pin groups */
+	/*        pg_name */
+	SIMPLE_PG(uart0),
+	SIMPLE_PG(uart1),
+	SIMPLE_PG(scb0),
+	SIMPLE_PG(i2s),
+	SIMPLE_PG(sdh),
+	SIMPLE_PG(sdio),
+
+	/* pseudo-pingroups for each GPIO pin follow */
+};
+
+/**
+ * struct tz1090_pmx - Private pinctrl data
+ * @dev:	Platform device
+ * @pctl:	Pin control device
+ * @regs:	Register region
+ * @lock:	Lock protecting coherency of pin_en, gpio_en, and SELECT regs
+ * @pin_en:	Pins that have been enabled (32 pins packed into each element)
+ * @gpio_en:	GPIOs that have been enabled (32 pins packed into each element)
+ */
+struct tz1090_pmx {
+	struct device		*dev;
+	struct pinctrl_dev	*pctl;
+	void __iomem		*regs;
+	spinlock_t		lock;
+	u32			pin_en[3];
+	u32			gpio_en[3];
+};
+
+static inline u32 pmx_read(struct tz1090_pmx *pmx, u32 reg)
+{
+	return ioread32(pmx->regs + reg);
+}
+
+static inline void pmx_write(struct tz1090_pmx *pmx, u32 val, u32 reg)
+{
+	iowrite32(val, pmx->regs + reg);
+}
+
+/*
+ * Pin control operations
+ */
+
+/* each GPIO pin has it's own pseudo pingroup containing only itself */
+
+static int tz1090_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(tz1090_groups) + NUM_GPIOS;
+}
+
+static const char *tz1090_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						 unsigned int group)
+{
+	if (group < ARRAY_SIZE(tz1090_groups)) {
+		/* normal pingroup */
+		return tz1090_groups[group].name;
+	} else {
+		/* individual gpio pin pseudo-pingroup */
+		unsigned int pin = group - ARRAY_SIZE(tz1090_groups);
+		return tz1090_pins[pin].name;
+	}
+}
+
+static int tz1090_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					 unsigned int group,
+					 const unsigned int **pins,
+					 unsigned int *num_pins)
+{
+	if (group < ARRAY_SIZE(tz1090_groups)) {
+		/* normal pingroup */
+		*pins = tz1090_groups[group].pins;
+		*num_pins = tz1090_groups[group].npins;
+	} else {
+		/* individual gpio pin pseudo-pingroup */
+		unsigned int pin = group - ARRAY_SIZE(tz1090_groups);
+		*pins = &tz1090_pins[pin].number;
+		*num_pins = 1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void tz1090_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+					struct seq_file *s,
+					unsigned int offset)
+{
+	seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+#endif
+
+static int reserve_map(struct device *dev, struct pinctrl_map **map,
+		       unsigned int *reserved_maps, unsigned int *num_maps,
+		       unsigned int reserve)
+{
+	unsigned int old_num = *reserved_maps;
+	unsigned int new_num = *num_maps + reserve;
+	struct pinctrl_map *new_map;
+
+	if (old_num >= new_num)
+		return 0;
+
+	new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL);
+	if (!new_map) {
+		dev_err(dev, "krealloc(map) failed\n");
+		return -ENOMEM;
+	}
+
+	memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map));
+
+	*map = new_map;
+	*reserved_maps = new_num;
+
+	return 0;
+}
+
+static int add_map_mux(struct pinctrl_map **map, unsigned int *reserved_maps,
+		       unsigned int *num_maps, const char *group,
+		       const char *function)
+{
+	if (WARN_ON(*num_maps == *reserved_maps))
+		return -ENOSPC;
+
+	(*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
+	(*map)[*num_maps].data.mux.group = group;
+	(*map)[*num_maps].data.mux.function = function;
+	(*num_maps)++;
+
+	return 0;
+}
+
+static int add_map_configs(struct device *dev,
+			   struct pinctrl_map **map,
+			   unsigned int *reserved_maps, unsigned int *num_maps,
+			   const char *group, unsigned long *configs,
+			   unsigned int num_configs)
+{
+	unsigned long *dup_configs;
+
+	if (WARN_ON(*num_maps == *reserved_maps))
+		return -ENOSPC;
+
+	dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs),
+			      GFP_KERNEL);
+	if (!dup_configs) {
+		dev_err(dev, "kmemdup(configs) failed\n");
+		return -ENOMEM;
+	}
+
+	(*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+	(*map)[*num_maps].data.configs.group_or_pin = group;
+	(*map)[*num_maps].data.configs.configs = dup_configs;
+	(*map)[*num_maps].data.configs.num_configs = num_configs;
+	(*num_maps)++;
+
+	return 0;
+}
+
+static void tz1090_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+				       struct pinctrl_map *map,
+				       unsigned int num_maps)
+{
+	int i;
+
+	for (i = 0; i < num_maps; i++)
+		if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
+			kfree(map[i].data.configs.configs);
+
+	kfree(map);
+}
+
+static int tz1090_pinctrl_dt_subnode_to_map(struct device *dev,
+					    struct device_node *np,
+					    struct pinctrl_map **map,
+					    unsigned int *reserved_maps,
+					    unsigned int *num_maps)
+{
+	int ret;
+	const char *function;
+	unsigned long *configs = NULL;
+	unsigned int num_configs = 0;
+	unsigned int reserve;
+	struct property *prop;
+	const char *group;
+
+	ret = of_property_read_string(np, "tz1090,function", &function);
+	if (ret < 0) {
+		/* EINVAL=missing, which is fine since it's optional */
+		if (ret != -EINVAL)
+			dev_err(dev, "could not parse property function\n");
+		function = NULL;
+	}
+
+	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	if (ret)
+		return ret;
+
+	reserve = 0;
+	if (function != NULL)
+		reserve++;
+	if (num_configs)
+		reserve++;
+	ret = of_property_count_strings(np, "tz1090,pins");
+	if (ret < 0) {
+		dev_err(dev, "could not parse property pins\n");
+		goto exit;
+	}
+	reserve *= ret;
+
+	ret = reserve_map(dev, map, reserved_maps, num_maps, reserve);
+	if (ret < 0)
+		goto exit;
+
+	of_property_for_each_string(np, "tz1090,pins", prop, group) {
+		if (function) {
+			ret = add_map_mux(map, reserved_maps, num_maps,
+					  group, function);
+			if (ret < 0)
+				goto exit;
+		}
+
+		if (num_configs) {
+			ret = add_map_configs(dev, map, reserved_maps,
+					      num_maps, group, configs,
+					      num_configs);
+			if (ret < 0)
+				goto exit;
+		}
+	}
+
+	ret = 0;
+
+exit:
+	kfree(configs);
+	return ret;
+}
+
+static int tz1090_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+					 struct device_node *np_config,
+					 struct pinctrl_map **map,
+					 unsigned int *num_maps)
+{
+	unsigned int reserved_maps;
+	struct device_node *np;
+	int ret;
+
+	reserved_maps = 0;
+	*map = NULL;
+	*num_maps = 0;
+
+	for_each_child_of_node(np_config, np) {
+		ret = tz1090_pinctrl_dt_subnode_to_map(pctldev->dev, np, map,
+						       &reserved_maps,
+						       num_maps);
+		if (ret < 0) {
+			tz1090_pinctrl_dt_free_map(pctldev, *map, *num_maps);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct pinctrl_ops tz1090_pinctrl_ops = {
+	.get_groups_count	= tz1090_pinctrl_get_groups_count,
+	.get_group_name		= tz1090_pinctrl_get_group_name,
+	.get_group_pins		= tz1090_pinctrl_get_group_pins,
+#ifdef CONFIG_DEBUG_FS
+	.pin_dbg_show		= tz1090_pinctrl_pin_dbg_show,
+#endif
+	.dt_node_to_map		= tz1090_pinctrl_dt_node_to_map,
+	.dt_free_map		= tz1090_pinctrl_dt_free_map,
+};
+
+/*
+ * Pin mux operations
+ */
+
+static int tz1090_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(tz1090_functions);
+}
+
+static const char *tz1090_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+						unsigned int function)
+{
+	return tz1090_functions[function].name;
+}
+
+static int tz1090_pinctrl_get_func_groups(struct pinctrl_dev *pctldev,
+					  unsigned int function,
+					  const char * const **groups,
+					  unsigned int * const num_groups)
+{
+	/* pingroup functions */
+	*groups = tz1090_functions[function].groups;
+	*num_groups = tz1090_functions[function].ngroups;
+	return 0;
+}
+
+/**
+ * tz1090_pinctrl_select() - update bit in SELECT register
+ * @pmx:		Pinmux data
+ * @pin:		Pin number (must be within GPIO range)
+ */
+static void tz1090_pinctrl_select(struct tz1090_pmx *pmx,
+				  unsigned int pin)
+{
+	u32 reg, reg_shift, select, val;
+	unsigned int pmx_index, pmx_shift;
+	unsigned long flags;
+
+	/* uses base 32 instead of base 30 */
+	pmx_index = pin >> 5;
+	pmx_shift = pin & 0x1f;
+
+	/* select = !perip || gpio */
+	select = ((~pmx->pin_en[pmx_index] |
+		   pmx->gpio_en[pmx_index]) >> pmx_shift) & 1;
+
+	/* find register and bit offset (base 30) */
+	reg = REG_PINCTRL_SELECT + 4*(pin / 30);
+	reg_shift = pin % 30;
+
+	/* modify gpio select bit */
+	__global_lock2(flags);
+	val = pmx_read(pmx, reg);
+	val &= ~BIT(reg_shift);
+	val |= select << reg_shift;
+	pmx_write(pmx, val, reg);
+	__global_unlock2(flags);
+}
+
+/**
+ * tz1090_pinctrl_gpio_select() - enable/disable GPIO usage for a pin
+ * @pmx:		Pinmux data
+ * @pin:		Pin number
+ * @gpio_select:	true to enable pin as GPIO,
+ *			false to leave control to whatever function is enabled
+ *
+ * Records that GPIO usage is enabled/disabled so that enabling a function
+ * doesn't override the SELECT register bit.
+ */
+static void tz1090_pinctrl_gpio_select(struct tz1090_pmx *pmx,
+				       unsigned int pin,
+				       bool gpio_select)
+{
+	unsigned int index, shift;
+	u32 gpio_en;
+
+	if (pin >= NUM_GPIOS)
+		return;
+
+	/* uses base 32 instead of base 30 */
+	index = pin >> 5;
+	shift = pin & 0x1f;
+
+	spin_lock(&pmx->lock);
+
+	/* keep a record whether gpio is selected */
+	gpio_en = pmx->gpio_en[index];
+	gpio_en &= ~BIT(shift);
+	if (gpio_select)
+		gpio_en |= BIT(shift);
+	pmx->gpio_en[index] = gpio_en;
+
+	/* update the select bit */
+	tz1090_pinctrl_select(pmx, pin);
+
+	spin_unlock(&pmx->lock);
+}
+
+/**
+ * tz1090_pinctrl_perip_select() - enable/disable peripheral interface for a pin
+ * @pmx:		Pinmux data
+ * @pin:		Pin number
+ * @perip_select:	true to enable peripheral interface when not GPIO,
+ *			false to leave pin in GPIO mode
+ *
+ * Records that peripheral usage is enabled/disabled so that SELECT register can
+ * be set appropriately when GPIO is disabled.
+ */
+static void tz1090_pinctrl_perip_select(struct tz1090_pmx *pmx,
+					unsigned int pin,
+					bool perip_select)
+{
+	unsigned int index, shift;
+	u32 pin_en;
+
+	if (pin >= NUM_GPIOS)
+		return;
+
+	/* uses base 32 instead of base 30 */
+	index = pin >> 5;
+	shift = pin & 0x1f;
+
+	spin_lock(&pmx->lock);
+
+	/* keep a record whether peripheral is selected */
+	pin_en = pmx->pin_en[index];
+	pin_en &= ~BIT(shift);
+	if (perip_select)
+		pin_en |= BIT(shift);
+	pmx->pin_en[index] = pin_en;
+
+	/* update the select bit */
+	tz1090_pinctrl_select(pmx, pin);
+
+	spin_unlock(&pmx->lock);
+}
+
+/**
+ * tz1090_pinctrl_enable_mux() - Switch a pin mux group to a function.
+ * @pmx:		Pinmux data
+ * @desc:		Pinmux description
+ * @function:		Function to switch to
+ *
+ * Enable a particular function on a pin mux group. Since pin mux descriptions
+ * are nested this function is recursive.
+ */
+static int tz1090_pinctrl_enable_mux(struct tz1090_pmx *pmx,
+				     const struct tz1090_muxdesc *desc,
+				     unsigned int function)
+{
+	const int *fit;
+	unsigned long flags;
+	int mux;
+	unsigned int func, ret;
+	u32 reg, mask;
+
+	/* find the mux value for this function, searching recursively */
+	for (mux = 0, fit = desc->funcs;
+	     mux < ARRAY_SIZE(desc->funcs); ++mux, ++fit) {
+		func = *fit;
+		if (func == function)
+			goto found_mux;
+
+		/* maybe it's a sub-mux */
+		if (func < ARRAY_SIZE(tz1090_submux) && tz1090_submux[func]) {
+			ret = tz1090_pinctrl_enable_mux(pmx,
+							tz1090_submux[func],
+							function);
+			if (!ret)
+				goto found_mux;
+		}
+	}
+
+	return -EINVAL;
+found_mux:
+
+	/* Set up the mux */
+	if (desc->width) {
+		mask = (BIT(desc->width) - 1) << desc->bit;
+		__global_lock2(flags);
+		reg = pmx_read(pmx, desc->reg);
+		reg &= ~mask;
+		reg |= (mux << desc->bit) & mask;
+		pmx_write(pmx, reg, desc->reg);
+		__global_unlock2(flags);
+	}
+
+	return 0;
+}
+
+/**
+ * tz1090_pinctrl_enable() - Enable a function on a pin group.
+ * @pctldev:		Pin control data
+ * @function:		Function index to enable
+ * @group:		Group index to enable
+ *
+ * Enable a particular function on a group of pins. The per GPIO pin pseudo pin
+ * groups can be used (in which case the pin will be enabled in peripheral mode
+ * and if it belongs to a pin mux group the mux will be switched if it isn't
+ * already in use. Some convenience pin groups can also be used in which case
+ * the effect is the same as enabling the function on each individual pin in the
+ * group.
+ */
+static int tz1090_pinctrl_enable(struct pinctrl_dev *pctldev,
+				 unsigned int function, unsigned int group)
+{
+	struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	struct tz1090_pingroup *grp;
+	int ret;
+	unsigned int pin_num, mux_group, i, npins;
+	const unsigned int *pins;
+
+	/* group of pins? */
+	if (group < ARRAY_SIZE(tz1090_groups)) {
+		grp = &tz1090_groups[group];
+		npins = grp->npins;
+		pins = grp->pins;
+		/*
+		 * All pins in the group must belong to the same mux group,
+		 * which allows us to just use the mux group of the first pin.
+		 * By explicitly listing permitted pingroups for each function
+		 * the pinmux core should ensure this is always the case.
+		 */
+	} else {
+		pin_num = group - ARRAY_SIZE(tz1090_groups);
+		npins = 1;
+		pins = &pin_num;
+	}
+	mux_group = tz1090_mux_pins[*pins];
+
+	/* no mux group, but can still be individually muxed to peripheral */
+	if (mux_group >= TZ1090_MUX_GROUP_MAX) {
+		if (function == TZ1090_MUX_PERIP)
+			goto mux_pins;
+		return -EINVAL;
+	}
+
+	/* mux group already set to a different function? */
+	grp = &tz1090_mux_groups[mux_group];
+	if (grp->func_count && grp->func != function) {
+		dev_err(pctldev->dev,
+			"%s: can't mux pin(s) to '%s', group already muxed to '%s'\n",
+			__func__, tz1090_functions[function].name,
+			tz1090_functions[grp->func].name);
+		return -EBUSY;
+	}
+
+	dev_dbg(pctldev->dev, "%s: muxing %u pin(s) in '%s' to '%s'\n",
+		__func__, npins, grp->name, tz1090_functions[function].name);
+
+	/* if first pin in mux group to be enabled, enable the group mux */
+	if (!grp->func_count) {
+		grp->func = function;
+		ret = tz1090_pinctrl_enable_mux(pmx, &grp->mux, function);
+		if (ret)
+			return ret;
+	}
+	/* add pins to ref count and mux individually to peripheral */
+	grp->func_count += npins;
+mux_pins:
+	for (i = 0; i < npins; ++i)
+		tz1090_pinctrl_perip_select(pmx, pins[i], true);
+
+	return 0;
+}
+
+/**
+ * tz1090_pinctrl_disable() - Disable a function on a pin group.
+ * @pctldev:		Pin control data
+ * @function:		Function index to disable
+ * @group:		Group index to disable
+ *
+ * Disable a particular function on a group of pins. The per GPIO pin pseudo pin
+ * groups can be used (in which case the pin will be taken out of peripheral
+ * mode. Some convenience pin groups can also be used in which case the effect
+ * is the same as enabling the function on each individual pin in the group.
+ */
+static void tz1090_pinctrl_disable(struct pinctrl_dev *pctldev,
+				   unsigned int function, unsigned int group)
+{
+	struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	struct tz1090_pingroup *grp;
+	unsigned int pin_num, mux_group, i, npins;
+	const unsigned int *pins;
+
+	/* group of pins? */
+	if (group < ARRAY_SIZE(tz1090_groups)) {
+		grp = &tz1090_groups[group];
+		npins = grp->npins;
+		pins = grp->pins;
+		/*
+		 * All pins in the group must belong to the same mux group,
+		 * which allows us to just use the mux group of the first pin.
+		 * By explicitly listing permitted pingroups for each function
+		 * the pinmux core should ensure this is always the case.
+		 */
+	} else {
+		pin_num = group - ARRAY_SIZE(tz1090_groups);
+		npins = 1;
+		pins = &pin_num;
+	}
+	mux_group = tz1090_mux_pins[*pins];
+
+	/* no mux group, but can still be individually muxed to peripheral */
+	if (mux_group >= TZ1090_MUX_GROUP_MAX) {
+		if (function == TZ1090_MUX_PERIP)
+			goto unmux_pins;
+		return;
+	}
+
+	/* mux group already set to a different function? */
+	grp = &tz1090_mux_groups[mux_group];
+	dev_dbg(pctldev->dev, "%s: unmuxing %u pin(s) in '%s' from '%s'\n",
+		__func__, npins, grp->name, tz1090_functions[function].name);
+
+	/* subtract pins from ref count and unmux individually */
+	WARN_ON(grp->func_count < npins);
+	grp->func_count -= npins;
+unmux_pins:
+	for (i = 0; i < npins; ++i)
+		tz1090_pinctrl_perip_select(pmx, pins[i], false);
+}
+
+/**
+ * tz1090_pinctrl_gpio_request_enable() - Put pin in GPIO mode.
+ * @pctldev:		Pin control data
+ * @range:		GPIO range
+ * @pin:		Pin number
+ *
+ * Puts a particular pin into GPIO mode, disabling peripheral control until it's
+ * disabled again.
+ */
+static int tz1090_pinctrl_gpio_request_enable(struct pinctrl_dev *pctldev,
+					      struct pinctrl_gpio_range *range,
+					      unsigned int pin)
+{
+	struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	tz1090_pinctrl_gpio_select(pmx, pin, true);
+	return 0;
+}
+
+/**
+ * tz1090_pinctrl_gpio_disable_free() - Take pin out of GPIO mode.
+ * @pctldev:		Pin control data
+ * @range:		GPIO range
+ * @pin:		Pin number
+ *
+ * Take a particular pin out of GPIO mode. If the pin is enabled for a
+ * peripheral it will return to peripheral mode.
+ */
+static void tz1090_pinctrl_gpio_disable_free(struct pinctrl_dev *pctldev,
+					     struct pinctrl_gpio_range *range,
+					     unsigned int pin)
+{
+	struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	tz1090_pinctrl_gpio_select(pmx, pin, false);
+}
+
+static struct pinmux_ops tz1090_pinmux_ops = {
+	.get_functions_count	= tz1090_pinctrl_get_funcs_count,
+	.get_function_name	= tz1090_pinctrl_get_func_name,
+	.get_function_groups	= tz1090_pinctrl_get_func_groups,
+	.enable			= tz1090_pinctrl_enable,
+	.disable		= tz1090_pinctrl_disable,
+	.gpio_request_enable	= tz1090_pinctrl_gpio_request_enable,
+	.gpio_disable_free	= tz1090_pinctrl_gpio_disable_free,
+};
+
+/*
+ * Pin config operations
+ */
+
+struct tz1090_pinconf_pullup {
+	unsigned char index;
+	unsigned char shift;
+};
+
+/* The mapping of pin to pull up/down register index and shift */
+static struct tz1090_pinconf_pullup tz1090_pinconf_pullup[] = {
+	{5, 22}, /*  0 - TZ1090_PIN_SDIO_CLK */
+	{0, 14}, /*  1 - TZ1090_PIN_SDIO_CMD */
+	{0,  6}, /*  2 - TZ1090_PIN_SDIO_D0 */
+	{0,  8}, /*  3 - TZ1090_PIN_SDIO_D1 */
+	{0, 10}, /*  4 - TZ1090_PIN_SDIO_D2 */
+	{0, 12}, /*  5 - TZ1090_PIN_SDIO_D3 */
+	{0,  2}, /*  6 - TZ1090_PIN_SDH_CD */
+	{0,  4}, /*  7 - TZ1090_PIN_SDH_WP */
+	{0, 16}, /*  8 - TZ1090_PIN_SPI0_MCLK */
+	{0, 18}, /*  9 - TZ1090_PIN_SPI0_CS0 */
+	{0, 20}, /* 10 - TZ1090_PIN_SPI0_CS1 */
+	{0, 22}, /* 11 - TZ1090_PIN_SPI0_CS2 */
+	{0, 24}, /* 12 - TZ1090_PIN_SPI0_DOUT */
+	{0, 26}, /* 13 - TZ1090_PIN_SPI0_DIN */
+	{0, 28}, /* 14 - TZ1090_PIN_SPI1_MCLK */
+	{0, 30}, /* 15 - TZ1090_PIN_SPI1_CS0 */
+	{1,  0}, /* 16 - TZ1090_PIN_SPI1_CS1 */
+	{1,  2}, /* 17 - TZ1090_PIN_SPI1_CS2 */
+	{1,  4}, /* 18 - TZ1090_PIN_SPI1_DOUT */
+	{1,  6}, /* 19 - TZ1090_PIN_SPI1_DIN */
+	{1,  8}, /* 20 - TZ1090_PIN_UART0_RXD */
+	{1, 10}, /* 21 - TZ1090_PIN_UART0_TXD */
+	{1, 12}, /* 22 - TZ1090_PIN_UART0_CTS */
+	{1, 14}, /* 23 - TZ1090_PIN_UART0_RTS */
+	{1, 16}, /* 24 - TZ1090_PIN_UART1_RXD */
+	{1, 18}, /* 25 - TZ1090_PIN_UART1_TXD */
+	{1, 20}, /* 26 - TZ1090_PIN_SCB0_SDAT */
+	{1, 22}, /* 27 - TZ1090_PIN_SCB0_SCLK */
+	{1, 24}, /* 28 - TZ1090_PIN_SCB1_SDAT */
+	{1, 26}, /* 29 - TZ1090_PIN_SCB1_SCLK */
+
+	{1, 28}, /* 30 - TZ1090_PIN_SCB2_SDAT */
+	{1, 30}, /* 31 - TZ1090_PIN_SCB2_SCLK */
+	{2,  0}, /* 32 - TZ1090_PIN_I2S_MCLK */
+	{2,  2}, /* 33 - TZ1090_PIN_I2S_BCLK_OUT */
+	{2,  4}, /* 34 - TZ1090_PIN_I2S_LRCLK_OUT */
+	{2,  6}, /* 35 - TZ1090_PIN_I2S_DOUT0 */
+	{2,  8}, /* 36 - TZ1090_PIN_I2S_DOUT1 */
+	{2, 10}, /* 37 - TZ1090_PIN_I2S_DOUT2 */
+	{2, 12}, /* 38 - TZ1090_PIN_I2S_DIN */
+	{4, 12}, /* 39 - TZ1090_PIN_PDM_A */
+	{4, 14}, /* 40 - TZ1090_PIN_PDM_B */
+	{4, 18}, /* 41 - TZ1090_PIN_PDM_C */
+	{4, 20}, /* 42 - TZ1090_PIN_PDM_D */
+	{2, 14}, /* 43 - TZ1090_PIN_TFT_RED0 */
+	{2, 16}, /* 44 - TZ1090_PIN_TFT_RED1 */
+	{2, 18}, /* 45 - TZ1090_PIN_TFT_RED2 */
+	{2, 20}, /* 46 - TZ1090_PIN_TFT_RED3 */
+	{2, 22}, /* 47 - TZ1090_PIN_TFT_RED4 */
+	{2, 24}, /* 48 - TZ1090_PIN_TFT_RED5 */
+	{2, 26}, /* 49 - TZ1090_PIN_TFT_RED6 */
+	{2, 28}, /* 50 - TZ1090_PIN_TFT_RED7 */
+	{2, 30}, /* 51 - TZ1090_PIN_TFT_GREEN0 */
+	{3,  0}, /* 52 - TZ1090_PIN_TFT_GREEN1 */
+	{3,  2}, /* 53 - TZ1090_PIN_TFT_GREEN2 */
+	{3,  4}, /* 54 - TZ1090_PIN_TFT_GREEN3 */
+	{3,  6}, /* 55 - TZ1090_PIN_TFT_GREEN4 */
+	{3,  8}, /* 56 - TZ1090_PIN_TFT_GREEN5 */
+	{3, 10}, /* 57 - TZ1090_PIN_TFT_GREEN6 */
+	{3, 12}, /* 58 - TZ1090_PIN_TFT_GREEN7 */
+	{3, 14}, /* 59 - TZ1090_PIN_TFT_BLUE0 */
+
+	{3, 16}, /* 60 - TZ1090_PIN_TFT_BLUE1 */
+	{3, 18}, /* 61 - TZ1090_PIN_TFT_BLUE2 */
+	{3, 20}, /* 62 - TZ1090_PIN_TFT_BLUE3 */
+	{3, 22}, /* 63 - TZ1090_PIN_TFT_BLUE4 */
+	{3, 24}, /* 64 - TZ1090_PIN_TFT_BLUE5 */
+	{3, 26}, /* 65 - TZ1090_PIN_TFT_BLUE6 */
+	{3, 28}, /* 66 - TZ1090_PIN_TFT_BLUE7 */
+	{3, 30}, /* 67 - TZ1090_PIN_TFT_VDDEN_GD */
+	{4,  0}, /* 68 - TZ1090_PIN_TFT_PANELCLK */
+	{4,  2}, /* 69 - TZ1090_PIN_TFT_BLANK_LS */
+	{4,  4}, /* 70 - TZ1090_PIN_TFT_VSYNC_NS */
+	{4,  6}, /* 71 - TZ1090_PIN_TFT_HSYNC_NR */
+	{4,  8}, /* 72 - TZ1090_PIN_TFT_VD12ACB */
+	{4, 10}, /* 73 - TZ1090_PIN_TFT_PWRSAVE */
+	{4, 24}, /* 74 - TZ1090_PIN_TX_ON */
+	{4, 26}, /* 75 - TZ1090_PIN_RX_ON */
+	{4, 28}, /* 76 - TZ1090_PIN_PLL_ON */
+	{4, 30}, /* 77 - TZ1090_PIN_PA_ON */
+	{5,  0}, /* 78 - TZ1090_PIN_RX_HP */
+	{5,  6}, /* 79 - TZ1090_PIN_GAIN0 */
+	{5,  8}, /* 80 - TZ1090_PIN_GAIN1 */
+	{5, 10}, /* 81 - TZ1090_PIN_GAIN2 */
+	{5, 12}, /* 82 - TZ1090_PIN_GAIN3 */
+	{5, 14}, /* 83 - TZ1090_PIN_GAIN4 */
+	{5, 16}, /* 84 - TZ1090_PIN_GAIN5 */
+	{5, 18}, /* 85 - TZ1090_PIN_GAIN6 */
+	{5, 20}, /* 86 - TZ1090_PIN_GAIN7 */
+	{5,  2}, /* 87 - TZ1090_PIN_ANT_SEL0 */
+	{5,  4}, /* 88 - TZ1090_PIN_ANT_SEL1 */
+	{0,  0}, /* 89 - TZ1090_PIN_SDH_CLK_IN */
+
+	{5, 24}, /* 90 - TZ1090_PIN_TCK */
+	{5, 26}, /* 91 - TZ1090_PIN_TRST */
+	{5, 28}, /* 92 - TZ1090_PIN_TDI */
+	{5, 30}, /* 93 - TZ1090_PIN_TDO */
+	{6,  0}, /* 94 - TZ1090_PIN_TMS */
+	{4, 16}, /* 95 - TZ1090_PIN_CLK_OUT0 */
+	{4, 22}, /* 96 - TZ1090_PIN_CLK_OUT1 */
+};
+
+static int tz1090_pinconf_reg(struct pinctrl_dev *pctldev,
+			      unsigned int pin,
+			      enum pin_config_param param,
+			      bool report_err,
+			      u32 *reg, u32 *width, u32 *mask, u32 *shift,
+			      u32 *val)
+{
+	struct tz1090_pinconf_pullup *pu;
+
+	/* All supported pins have controllable input bias */
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+		*val = REG_PU_PD_TRISTATE;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		*val = REG_PU_PD_UP;
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		*val = REG_PU_PD_DOWN;
+		break;
+	case PIN_CONFIG_BIAS_BUS_HOLD:
+		*val = REG_PU_PD_REPEATER;
+		break;
+	default:
+		return -ENOTSUPP;
+	};
+
+	/* Only input bias parameters supported */
+	pu = &tz1090_pinconf_pullup[pin];
+	*reg = REG_PINCTRL_PU_PD + 4*pu->index;
+	*shift = pu->shift;
+	*width = 2;
+
+	/* Calculate field information */
+	*mask = (BIT(*width) - 1) << *shift;
+
+	return 0;
+}
+
+static int tz1090_pinconf_get(struct pinctrl_dev *pctldev,
+			      unsigned int pin, unsigned long *config)
+{
+	struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	int ret;
+	u32 reg, width, mask, shift, val, tmp, arg;
+
+	/* Get register information */
+	ret = tz1090_pinconf_reg(pctldev, pin, param, true,
+				 &reg, &width, &mask, &shift, &val);
+	if (ret < 0)
+		return ret;
+
+	/* Extract field from register */
+	tmp = pmx_read(pmx, reg);
+	arg = ((tmp & mask) >> shift) == val;
+
+	/* Config not active */
+	if (!arg)
+		return -EINVAL;
+
+	/* And pack config */
+	*config = pinconf_to_config_packed(param, arg);
+
+	return 0;
+}
+
+static int tz1090_pinconf_set(struct pinctrl_dev *pctldev,
+			      unsigned int pin, unsigned long config)
+{
+	struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(config);
+	unsigned int arg = pinconf_to_config_argument(config);
+	int ret;
+	u32 reg, width, mask, shift, val, tmp;
+	unsigned long flags;
+
+	dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n",
+		__func__, tz1090_pins[pin].name, config);
+
+	/* Get register information */
+	ret = tz1090_pinconf_reg(pctldev, pin, param, true,
+				 &reg, &width, &mask, &shift, &val);
+	if (ret < 0)
+		return ret;
+
+	/* Unpack argument and range check it */
+	if (arg > 1) {
+		dev_dbg(pctldev->dev, "%s: arg %u out of range\n",
+			__func__, arg);
+		return -EINVAL;
+	}
+
+	/* Write register field */
+	__global_lock2(flags);
+	tmp = pmx_read(pmx, reg);
+	tmp &= ~mask;
+	if (arg)
+		tmp |= val << shift;
+	pmx_write(pmx, tmp, reg);
+	__global_unlock2(flags);
+
+	return 0;
+}
+
+static const int tz1090_boolean_map[] = {
+	[0]		= -EINVAL,
+	[1]		= 1,
+};
+
+static const int tz1090_dr_map[] = {
+	[REG_DR_2mA]	= 2,
+	[REG_DR_4mA]	= 4,
+	[REG_DR_8mA]	= 8,
+	[REG_DR_12mA]	= 12,
+};
+
+static int tz1090_pinconf_group_reg(struct pinctrl_dev *pctldev,
+				    const struct tz1090_pingroup *g,
+				    enum pin_config_param param,
+				    bool report_err,
+				    u32 *reg, u32 *width, u32 *mask, u32 *shift,
+				    const int **map)
+{
+	/* Drive configuration applies in groups, but not to all groups. */
+	if (!g->drv) {
+		if (report_err)
+			dev_dbg(pctldev->dev,
+				"%s: group %s has no drive control\n",
+				__func__, g->name);
+		return -ENOTSUPP;
+	}
+
+	/* Find information about drive parameter's register */
+	switch (param) {
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		*reg = REG_PINCTRL_SCHMITT;
+		*width = 1;
+		*map = tz1090_boolean_map;
+		break;
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		*reg = REG_PINCTRL_DR;
+		*width = 2;
+		*map = tz1090_dr_map;
+		break;
+	default:
+		return -ENOTSUPP;
+	};
+
+	/* Calculate field information */
+	*shift = g->slw_bit * *width;
+	*mask = (BIT(*width) - 1) << *shift;
+
+	return 0;
+}
+
+static int tz1090_pinconf_group_get(struct pinctrl_dev *pctldev,
+				    unsigned int group,
+				    unsigned long *config)
+{
+	struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tz1090_pingroup *g;
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	int ret, arg;
+	unsigned int pin;
+	u32 reg, width, mask, shift, val;
+	const int *map;
+
+	if (group >= ARRAY_SIZE(tz1090_groups)) {
+		pin = group - ARRAY_SIZE(tz1090_groups);
+		return tz1090_pinconf_get(pctldev, pin, config);
+	}
+
+	g = &tz1090_groups[group];
+	if (g->npins == 1) {
+		pin = g->pins[0];
+		ret = tz1090_pinconf_get(pctldev, pin, config);
+		if (ret != -ENOTSUPP)
+			return ret;
+	}
+
+	/* Get register information */
+	ret = tz1090_pinconf_group_reg(pctldev, g, param, true,
+				       &reg, &width, &mask, &shift, &map);
+	if (ret < 0)
+		return ret;
+
+	/* Extract field from register */
+	val = pmx_read(pmx, reg);
+	arg = map[(val & mask) >> shift];
+	if (arg < 0)
+		return arg;
+
+	/* And pack config */
+	*config = pinconf_to_config_packed(param, arg);
+
+	return 0;
+}
+
+static int tz1090_pinconf_group_set(struct pinctrl_dev *pctldev,
+				    unsigned int group, unsigned long config)
+{
+	struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
+	const struct tz1090_pingroup *g;
+	enum pin_config_param param = pinconf_to_config_param(config);
+	unsigned int arg, pin, i;
+	const unsigned int *pit;
+	int ret;
+	u32 reg, width, mask, shift, val;
+	unsigned long flags;
+	const int *map;
+
+	if (group >= ARRAY_SIZE(tz1090_groups)) {
+		pin = group - ARRAY_SIZE(tz1090_groups);
+		return tz1090_pinconf_set(pctldev, pin, config);
+	}
+
+	g = &tz1090_groups[group];
+	if (g->npins == 1) {
+		pin = g->pins[0];
+		ret = tz1090_pinconf_set(pctldev, pin, config);
+		if (ret != -ENOTSUPP)
+			return ret;
+	}
+
+	dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n",
+		__func__, g->name, config);
+
+	/* Get register information */
+	ret = tz1090_pinconf_group_reg(pctldev, g, param, true,
+				       &reg, &width, &mask, &shift, &map);
+	if (ret < 0) {
+		/*
+		 * Maybe we're trying to set a per-pin configuration of a group,
+		 * so do the pins one by one. This is mainly as a convenience.
+		 */
+		for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) {
+			ret = tz1090_pinconf_set(pctldev, *pit, config);
+			if (ret)
+				return ret;
+		}
+		return 0;
+	}
+
+	/* Unpack argument and map it to register value */
+	arg = pinconf_to_config_argument(config);
+	for (i = 0; i < BIT(width); ++i) {
+		if (map[i] == arg || (map[i] == -EINVAL && !arg)) {
+			/* Write register field */
+			__global_lock2(flags);
+			val = pmx_read(pmx, reg);
+			val &= ~mask;
+			val |= i << shift;
+			pmx_write(pmx, val, reg);
+			__global_unlock2(flags);
+			return 0;
+		}
+	}
+
+	dev_dbg(pctldev->dev, "%s: arg %u not supported\n",
+		__func__, arg);
+	return -EINVAL;
+}
+
+static struct pinconf_ops tz1090_pinconf_ops = {
+	.is_generic			= true,
+	.pin_config_get			= tz1090_pinconf_get,
+	.pin_config_set			= tz1090_pinconf_set,
+	.pin_config_group_get		= tz1090_pinconf_group_get,
+	.pin_config_group_set		= tz1090_pinconf_group_set,
+	.pin_config_config_dbg_show	= pinconf_generic_dump_config,
+};
+
+/*
+ * Pin control driver setup
+ */
+
+static struct pinctrl_desc tz1090_pinctrl_desc = {
+	.pctlops	= &tz1090_pinctrl_ops,
+	.pmxops		= &tz1090_pinmux_ops,
+	.confops	= &tz1090_pinconf_ops,
+	.owner		= THIS_MODULE,
+};
+
+static int tz1090_pinctrl_probe(struct platform_device *pdev)
+{
+	struct tz1090_pmx *pmx;
+	struct resource *res;
+
+	pmx = devm_kzalloc(&pdev->dev, sizeof(*pmx), GFP_KERNEL);
+	if (!pmx) {
+		dev_err(&pdev->dev, "Can't alloc tz1090_pmx\n");
+		return -ENOMEM;
+	}
+	pmx->dev = &pdev->dev;
+	spin_lock_init(&pmx->lock);
+
+	tz1090_pinctrl_desc.name = dev_name(&pdev->dev);
+	tz1090_pinctrl_desc.pins = tz1090_pins;
+	tz1090_pinctrl_desc.npins = ARRAY_SIZE(tz1090_pins);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing MEM resource\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     resource_size(res),
+				     dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev,
+			"Couldn't request MEM resource\n");
+		return -ENODEV;
+	}
+
+	pmx->regs = devm_ioremap(&pdev->dev, res->start,
+				 resource_size(res));
+	if (!pmx->regs) {
+		dev_err(&pdev->dev, "Couldn't ioremap regs\n");
+		return -ENODEV;
+	}
+
+	pmx->pctl = pinctrl_register(&tz1090_pinctrl_desc, &pdev->dev, pmx);
+	if (!pmx->pctl) {
+		dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, pmx);
+
+	dev_info(&pdev->dev, "TZ1090 pinctrl driver initialised\n");
+
+	return 0;
+}
+
+static int tz1090_pinctrl_remove(struct platform_device *pdev)
+{
+	struct tz1090_pmx *pmx = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(pmx->pctl);
+
+	return 0;
+}
+
+static struct of_device_id tz1090_pinctrl_of_match[] = {
+	{ .compatible = "img,tz1090-pinctrl", },
+	{ },
+};
+
+static struct platform_driver tz1090_pinctrl_driver = {
+	.driver = {
+		.name		= "tz1090-pinctrl",
+		.owner		= THIS_MODULE,
+		.of_match_table	= tz1090_pinctrl_of_match,
+	},
+	.probe	= tz1090_pinctrl_probe,
+	.remove	= tz1090_pinctrl_remove,
+};
+
+static int __init tz1090_pinctrl_init(void)
+{
+	tz1090_init_mux_pins();
+	return platform_driver_register(&tz1090_pinctrl_driver);
+}
+arch_initcall(tz1090_pinctrl_init);
+
+static void __exit tz1090_pinctrl_exit(void)
+{
+	platform_driver_unregister(&tz1090_pinctrl_driver);
+}
+module_exit(tz1090_pinctrl_exit);
+
+MODULE_AUTHOR("Imagination Technologies Ltd.");
+MODULE_DESCRIPTION("Toumaz Xenif TZ1090 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, tz1090_pinctrl_of_match);
diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c
index 06bfa09bb15..46a152d1735 100644
--- a/drivers/pinctrl/pinctrl-u300.c
+++ b/drivers/pinctrl/pinctrl-u300.c
@@ -1100,7 +1100,6 @@ static int u300_pmx_remove(struct platform_device *pdev)
 	struct u300_pmx *upmx = platform_get_drvdata(pdev);
 
 	pinctrl_unregister(upmx->pctl);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
diff --git a/drivers/pinctrl/pinctrl-vf610.c b/drivers/pinctrl/pinctrl-vf610.c
new file mode 100644
index 00000000000..68a970b1dbc
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-vf610.c
@@ -0,0 +1,338 @@
+/*
+ * VF610 pinctrl driver based on imx pinmux and pinconf core
+ *
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+enum vf610_pads {
+	VF610_PAD_PTA6 = 0,
+	VF610_PAD_PTA8 = 1,
+	VF610_PAD_PTA9 = 2,
+	VF610_PAD_PTA10 = 3,
+	VF610_PAD_PTA11 = 4,
+	VF610_PAD_PTA12 = 5,
+	VF610_PAD_PTA16 = 6,
+	VF610_PAD_PTA17 = 7,
+	VF610_PAD_PTA18 = 8,
+	VF610_PAD_PTA19 = 9,
+	VF610_PAD_PTA20 = 10,
+	VF610_PAD_PTA21 = 11,
+	VF610_PAD_PTA22 = 12,
+	VF610_PAD_PTA23 = 13,
+	VF610_PAD_PTA24 = 14,
+	VF610_PAD_PTA25 = 15,
+	VF610_PAD_PTA26 = 16,
+	VF610_PAD_PTA27 = 17,
+	VF610_PAD_PTA28 = 18,
+	VF610_PAD_PTA29 = 19,
+	VF610_PAD_PTA30 = 20,
+	VF610_PAD_PTA31 = 21,
+	VF610_PAD_PTB0 = 22,
+	VF610_PAD_PTB1 = 23,
+	VF610_PAD_PTB2 = 24,
+	VF610_PAD_PTB3 = 25,
+	VF610_PAD_PTB4 = 26,
+	VF610_PAD_PTB5 = 27,
+	VF610_PAD_PTB6 = 28,
+	VF610_PAD_PTB7 = 29,
+	VF610_PAD_PTB8 = 30,
+	VF610_PAD_PTB9 = 31,
+	VF610_PAD_PTB10 = 32,
+	VF610_PAD_PTB11 = 33,
+	VF610_PAD_PTB12 = 34,
+	VF610_PAD_PTB13 = 35,
+	VF610_PAD_PTB14 = 36,
+	VF610_PAD_PTB15 = 37,
+	VF610_PAD_PTB16 = 38,
+	VF610_PAD_PTB17 = 39,
+	VF610_PAD_PTB18 = 40,
+	VF610_PAD_PTB19 = 41,
+	VF610_PAD_PTB20 = 42,
+	VF610_PAD_PTB21 = 43,
+	VF610_PAD_PTB22 = 44,
+	VF610_PAD_PTC0 = 45,
+	VF610_PAD_PTC1 = 46,
+	VF610_PAD_PTC2 = 47,
+	VF610_PAD_PTC3 = 48,
+	VF610_PAD_PTC4 = 49,
+	VF610_PAD_PTC5 = 50,
+	VF610_PAD_PTC6 = 51,
+	VF610_PAD_PTC7 = 52,
+	VF610_PAD_PTC8 = 53,
+	VF610_PAD_PTC9 = 54,
+	VF610_PAD_PTC10 = 55,
+	VF610_PAD_PTC11 = 56,
+	VF610_PAD_PTC12 = 57,
+	VF610_PAD_PTC13 = 58,
+	VF610_PAD_PTC14 = 59,
+	VF610_PAD_PTC15 = 60,
+	VF610_PAD_PTC16 = 61,
+	VF610_PAD_PTC17 = 62,
+	VF610_PAD_PTD31 = 63,
+	VF610_PAD_PTD30 = 64,
+	VF610_PAD_PTD29 = 65,
+	VF610_PAD_PTD28 = 66,
+	VF610_PAD_PTD27 = 67,
+	VF610_PAD_PTD26 = 68,
+	VF610_PAD_PTD25 = 69,
+	VF610_PAD_PTD24 = 70,
+	VF610_PAD_PTD23 = 71,
+	VF610_PAD_PTD22 = 72,
+	VF610_PAD_PTD21 = 73,
+	VF610_PAD_PTD20 = 74,
+	VF610_PAD_PTD19 = 75,
+	VF610_PAD_PTD18 = 76,
+	VF610_PAD_PTD17 = 77,
+	VF610_PAD_PTD16 = 78,
+	VF610_PAD_PTD0 = 79,
+	VF610_PAD_PTD1 = 80,
+	VF610_PAD_PTD2 = 81,
+	VF610_PAD_PTD3 = 82,
+	VF610_PAD_PTD4 = 83,
+	VF610_PAD_PTD5 = 84,
+	VF610_PAD_PTD6 = 85,
+	VF610_PAD_PTD7 = 86,
+	VF610_PAD_PTD8 = 87,
+	VF610_PAD_PTD9 = 88,
+	VF610_PAD_PTD10 = 89,
+	VF610_PAD_PTD11 = 90,
+	VF610_PAD_PTD12 = 91,
+	VF610_PAD_PTD13 = 92,
+	VF610_PAD_PTB23 = 93,
+	VF610_PAD_PTB24 = 94,
+	VF610_PAD_PTB25 = 95,
+	VF610_PAD_PTB26 = 96,
+	VF610_PAD_PTB27 = 97,
+	VF610_PAD_PTB28 = 98,
+	VF610_PAD_PTC26 = 99,
+	VF610_PAD_PTC27 = 100,
+	VF610_PAD_PTC28 = 101,
+	VF610_PAD_PTC29 = 102,
+	VF610_PAD_PTC30 = 103,
+	VF610_PAD_PTC31 = 104,
+	VF610_PAD_PTE0 = 105,
+	VF610_PAD_PTE1 = 106,
+	VF610_PAD_PTE2 = 107,
+	VF610_PAD_PTE3 = 108,
+	VF610_PAD_PTE4 = 109,
+	VF610_PAD_PTE5 = 110,
+	VF610_PAD_PTE6 = 111,
+	VF610_PAD_PTE7 = 112,
+	VF610_PAD_PTE8 = 113,
+	VF610_PAD_PTE9 = 114,
+	VF610_PAD_PTE10 = 115,
+	VF610_PAD_PTE11 = 116,
+	VF610_PAD_PTE12 = 117,
+	VF610_PAD_PTE13 = 118,
+	VF610_PAD_PTE14 = 119,
+	VF610_PAD_PTE15 = 120,
+	VF610_PAD_PTE16 = 121,
+	VF610_PAD_PTE17 = 122,
+	VF610_PAD_PTE18 = 123,
+	VF610_PAD_PTE19 = 124,
+	VF610_PAD_PTE20 = 125,
+	VF610_PAD_PTE21 = 126,
+	VF610_PAD_PTE22 = 127,
+	VF610_PAD_PTE23 = 128,
+	VF610_PAD_PTE24 = 129,
+	VF610_PAD_PTE25 = 130,
+	VF610_PAD_PTE26 = 131,
+	VF610_PAD_PTE27 = 132,
+	VF610_PAD_PTE28 = 133,
+	VF610_PAD_PTA7 = 134,
+};
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc vf610_pinctrl_pads[] = {
+	IMX_PINCTRL_PIN(VF610_PAD_PTA6),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA8),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA9),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA10),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA11),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA12),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA16),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA17),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA18),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA19),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA20),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA21),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA22),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA23),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA24),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA25),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA26),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA27),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA28),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA29),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA30),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA31),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB0),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB1),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB2),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB3),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB4),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB5),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB6),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB7),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB8),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB9),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB10),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB11),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB12),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB13),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB14),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB15),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB16),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB17),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB18),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB19),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB20),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB21),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB22),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC0),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC1),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC2),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC3),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC4),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC5),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC6),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC7),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC8),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC9),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC10),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC11),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC12),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC13),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC14),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC15),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC16),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC17),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD31),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD30),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD29),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD28),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD27),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD26),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD25),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD24),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD23),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD22),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD21),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD20),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD19),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD18),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD17),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD16),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD0),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD1),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD2),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD3),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD4),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD5),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD6),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD7),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD8),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD9),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD10),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD11),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD12),
+	IMX_PINCTRL_PIN(VF610_PAD_PTD13),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB23),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB24),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB25),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB26),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB27),
+	IMX_PINCTRL_PIN(VF610_PAD_PTB28),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC26),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC27),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC28),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC29),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC30),
+	IMX_PINCTRL_PIN(VF610_PAD_PTC31),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE0),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE1),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE2),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE3),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE4),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE5),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE6),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE7),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE8),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE9),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE10),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE11),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE12),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE13),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE14),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE15),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE16),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE17),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE18),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE19),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE20),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE21),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE22),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE23),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE24),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE25),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE26),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE27),
+	IMX_PINCTRL_PIN(VF610_PAD_PTE28),
+	IMX_PINCTRL_PIN(VF610_PAD_PTA7),
+};
+
+static struct imx_pinctrl_soc_info vf610_pinctrl_info = {
+	.pins = vf610_pinctrl_pads,
+	.npins = ARRAY_SIZE(vf610_pinctrl_pads),
+	.flags = ZERO_OFFSET_VALID | SHARE_MUX_CONF_REG,
+};
+
+static struct of_device_id vf610_pinctrl_of_match[] = {
+	{ .compatible = "fsl,vf610-iomuxc", },
+	{ /* sentinel */ }
+};
+
+static int vf610_pinctrl_probe(struct platform_device *pdev)
+{
+	return imx_pinctrl_probe(pdev, &vf610_pinctrl_info);
+}
+
+static struct platform_driver vf610_pinctrl_driver = {
+	.driver = {
+		.name = "vf610-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(vf610_pinctrl_of_match),
+	},
+	.probe = vf610_pinctrl_probe,
+	.remove = imx_pinctrl_remove,
+};
+
+static int __init vf610_pinctrl_init(void)
+{
+	return platform_driver_register(&vf610_pinctrl_driver);
+}
+arch_initcall(vf610_pinctrl_init);
+
+static void __exit vf610_pinctrl_exit(void)
+{
+	platform_driver_unregister(&vf610_pinctrl_driver);
+}
+module_exit(vf610_pinctrl_exit);
+
+MODULE_DESCRIPTION("Freescale VF610 pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
index 3b2fd43ff29..f3fc66b2437 100644
--- a/drivers/pinctrl/sh-pfc/core.c
+++ b/drivers/pinctrl/sh-pfc/core.c
@@ -18,6 +18,8 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -348,14 +350,72 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id sh_pfc_of_table[] = {
+#ifdef CONFIG_PINCTRL_PFC_R8A73A4
+	{
+		.compatible = "renesas,pfc-r8a73a4",
+		.data = &r8a73a4_pinmux_info,
+	},
+#endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7740
+	{
+		.compatible = "renesas,pfc-r8a7740",
+		.data = &r8a7740_pinmux_info,
+	},
+#endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7778
+	{
+		.compatible = "renesas,pfc-r8a7778",
+		.data = &r8a7778_pinmux_info,
+	},
+#endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7779
+	{
+		.compatible = "renesas,pfc-r8a7779",
+		.data = &r8a7779_pinmux_info,
+	},
+#endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7790
+	{
+		.compatible = "renesas,pfc-r8a7790",
+		.data = &r8a7790_pinmux_info,
+	},
+#endif
+#ifdef CONFIG_PINCTRL_PFC_SH7372
+	{
+		.compatible = "renesas,pfc-sh7372",
+		.data = &sh7372_pinmux_info,
+	},
+#endif
+#ifdef CONFIG_PINCTRL_PFC_SH73A0
+	{
+		.compatible = "renesas,pfc-sh73a0",
+		.data = &sh73a0_pinmux_info,
+	},
+#endif
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sh_pfc_of_table);
+#endif
+
 static int sh_pfc_probe(struct platform_device *pdev)
 {
+	const struct platform_device_id *platid = platform_get_device_id(pdev);
+#ifdef CONFIG_OF
+	struct device_node *np = pdev->dev.of_node;
+#endif
 	const struct sh_pfc_soc_info *info;
 	struct sh_pfc *pfc;
 	int ret;
 
-	info = pdev->id_entry->driver_data
-	      ? (void *)pdev->id_entry->driver_data : pdev->dev.platform_data;
+#ifdef CONFIG_OF
+	if (np)
+		info = of_match_device(sh_pfc_of_table, &pdev->dev)->data;
+	else
+#endif
+		info = platid ? (const void *)platid->driver_data : NULL;
+
 	if (info == NULL)
 		return -ENODEV;
 
@@ -501,6 +561,7 @@ static struct platform_driver sh_pfc_driver = {
 	.driver		= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(sh_pfc_of_table),
 	},
 };
 
diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c b/drivers/pinctrl/sh-pfc/pinctrl.c
index 3492ec9a33b..bc8b028bb5d 100644
--- a/drivers/pinctrl/sh-pfc/pinctrl.c
+++ b/drivers/pinctrl/sh-pfc/pinctrl.c
@@ -14,7 +14,9 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinctrl.h>
@@ -72,11 +74,214 @@ static void sh_pfc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
 	seq_printf(s, "%s", DRV_NAME);
 }
 
+#ifdef CONFIG_OF
+static int sh_pfc_map_add_config(struct pinctrl_map *map,
+				 const char *group_or_pin,
+				 enum pinctrl_map_type type,
+				 unsigned long *configs,
+				 unsigned int num_configs)
+{
+	unsigned long *cfgs;
+
+	cfgs = kmemdup(configs, num_configs * sizeof(*cfgs),
+		       GFP_KERNEL);
+	if (cfgs == NULL)
+		return -ENOMEM;
+
+	map->type = type;
+	map->data.configs.group_or_pin = group_or_pin;
+	map->data.configs.configs = cfgs;
+	map->data.configs.num_configs = num_configs;
+
+	return 0;
+}
+
+static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np,
+				    struct pinctrl_map **map,
+				    unsigned int *num_maps, unsigned int *index)
+{
+	struct pinctrl_map *maps = *map;
+	unsigned int nmaps = *num_maps;
+	unsigned int idx = *index;
+	unsigned int num_configs;
+	const char *function = NULL;
+	unsigned long *configs;
+	struct property *prop;
+	unsigned int num_groups;
+	unsigned int num_pins;
+	const char *group;
+	const char *pin;
+	int ret;
+
+	/* Parse the function and configuration properties. At least a function
+	 * or one configuration must be specified.
+	 */
+	ret = of_property_read_string(np, "renesas,function", &function);
+	if (ret < 0 && ret != -EINVAL) {
+		dev_err(dev, "Invalid function in DT\n");
+		return ret;
+	}
+
+	ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs);
+	if (ret < 0)
+		return ret;
+
+	if (!function && num_configs == 0) {
+		dev_err(dev,
+			"DT node must contain at least a function or config\n");
+		goto done;
+	}
+
+	/* Count the number of pins and groups and reallocate mappings. */
+	ret = of_property_count_strings(np, "renesas,pins");
+	if (ret == -EINVAL) {
+		num_pins = 0;
+	} else if (ret < 0) {
+		dev_err(dev, "Invalid pins list in DT\n");
+		goto done;
+	} else {
+		num_pins = ret;
+	}
+
+	ret = of_property_count_strings(np, "renesas,groups");
+	if (ret == -EINVAL) {
+		num_groups = 0;
+	} else if (ret < 0) {
+		dev_err(dev, "Invalid pin groups list in DT\n");
+		goto done;
+	} else {
+		num_groups = ret;
+	}
+
+	if (!num_pins && !num_groups) {
+		dev_err(dev, "No pin or group provided in DT node\n");
+		ret = -ENODEV;
+		goto done;
+	}
+
+	if (function)
+		nmaps += num_groups;
+	if (configs)
+		nmaps += num_pins + num_groups;
+
+	maps = krealloc(maps, sizeof(*maps) * nmaps, GFP_KERNEL);
+	if (maps == NULL) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	*map = maps;
+	*num_maps = nmaps;
+
+	/* Iterate over pins and groups and create the mappings. */
+	of_property_for_each_string(np, "renesas,groups", prop, group) {
+		if (function) {
+			maps[idx].type = PIN_MAP_TYPE_MUX_GROUP;
+			maps[idx].data.mux.group = group;
+			maps[idx].data.mux.function = function;
+			idx++;
+		}
+
+		if (configs) {
+			ret = sh_pfc_map_add_config(&maps[idx], group,
+						    PIN_MAP_TYPE_CONFIGS_GROUP,
+						    configs, num_configs);
+			if (ret < 0)
+				goto done;
+
+			idx++;
+		}
+	}
+
+	if (!configs) {
+		ret = 0;
+		goto done;
+	}
+
+	of_property_for_each_string(np, "renesas,pins", prop, pin) {
+		ret = sh_pfc_map_add_config(&maps[idx], pin,
+					    PIN_MAP_TYPE_CONFIGS_PIN,
+					    configs, num_configs);
+		if (ret < 0)
+			goto done;
+
+		idx++;
+	}
+
+done:
+	*index = idx;
+	kfree(configs);
+	return ret;
+}
+
+static void sh_pfc_dt_free_map(struct pinctrl_dev *pctldev,
+			       struct pinctrl_map *map, unsigned num_maps)
+{
+	unsigned int i;
+
+	if (map == NULL)
+		return;
+
+	for (i = 0; i < num_maps; ++i) {
+		if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP ||
+		    map[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+			kfree(map[i].data.configs.configs);
+	}
+
+	kfree(map);
+}
+
+static int sh_pfc_dt_node_to_map(struct pinctrl_dev *pctldev,
+				 struct device_node *np,
+				 struct pinctrl_map **map, unsigned *num_maps)
+{
+	struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
+	struct device *dev = pmx->pfc->dev;
+	struct device_node *child;
+	unsigned int index;
+	int ret;
+
+	*map = NULL;
+	*num_maps = 0;
+	index = 0;
+
+	for_each_child_of_node(np, child) {
+		ret = sh_pfc_dt_subnode_to_map(dev, child, map, num_maps,
+					       &index);
+		if (ret < 0)
+			goto done;
+	}
+
+	/* If no mapping has been found in child nodes try the config node. */
+	if (*num_maps == 0) {
+		ret = sh_pfc_dt_subnode_to_map(dev, np, map, num_maps, &index);
+		if (ret < 0)
+			goto done;
+	}
+
+	if (*num_maps)
+		return 0;
+
+	dev_err(dev, "no mapping found in node %s\n", np->full_name);
+	ret = -EINVAL;
+
+done:
+	if (ret < 0)
+		sh_pfc_dt_free_map(pctldev, *map, *num_maps);
+
+	return ret;
+}
+#endif /* CONFIG_OF */
+
 static const struct pinctrl_ops sh_pfc_pinctrl_ops = {
 	.get_groups_count	= sh_pfc_get_groups_count,
 	.get_group_name		= sh_pfc_get_group_name,
 	.get_group_pins		= sh_pfc_get_group_pins,
 	.pin_dbg_show		= sh_pfc_pin_dbg_show,
+#ifdef CONFIG_OF
+	.dt_node_to_map		= sh_pfc_dt_node_to_map,
+	.dt_free_map		= sh_pfc_dt_free_map,
+#endif
 };
 
 static int sh_pfc_get_functions_count(struct pinctrl_dev *pctldev)
diff --git a/drivers/pinctrl/sirf/Makefile b/drivers/pinctrl/sirf/Makefile
new file mode 100644
index 00000000000..3ffc475ce40
--- /dev/null
+++ b/drivers/pinctrl/sirf/Makefile
@@ -0,0 +1,5 @@
+# CSR SiRFsoc pinmux support
+
+obj-y	+= pinctrl-sirf.o
+obj-y	+= pinctrl-prima2.o
+obj-y	+= pinctrl-atlas6.o
diff --git a/drivers/pinctrl/sirf/pinctrl-atlas6.c b/drivers/pinctrl/sirf/pinctrl-atlas6.c
new file mode 100644
index 00000000000..1fa39a44417
--- /dev/null
+++ b/drivers/pinctrl/sirf/pinctrl-atlas6.c
@@ -0,0 +1,947 @@
+/*
+ * pinctrl pads, groups, functions for CSR SiRFatlasVI
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/bitops.h>
+
+#include "pinctrl-sirf.h"
+
+/*
+ * pad list for the pinmux subsystem
+ * refer to atlasVI_io_table_v0.93.xls
+ */
+static const struct pinctrl_pin_desc sirfsoc_pads[] = {
+	PINCTRL_PIN(0, "gpio0-0"),
+	PINCTRL_PIN(1, "gpio0-1"),
+	PINCTRL_PIN(2, "gpio0-2"),
+	PINCTRL_PIN(3, "gpio0-3"),
+	PINCTRL_PIN(4, "pwm0"),
+	PINCTRL_PIN(5, "pwm1"),
+	PINCTRL_PIN(6, "pwm2"),
+	PINCTRL_PIN(7, "pwm3"),
+	PINCTRL_PIN(8, "warm_rst_b"),
+	PINCTRL_PIN(9, "odo_0"),
+	PINCTRL_PIN(10, "odo_1"),
+	PINCTRL_PIN(11, "dr_dir"),
+	PINCTRL_PIN(12, "rts_0"),
+	PINCTRL_PIN(13, "scl_1"),
+	PINCTRL_PIN(14, "ntrst"),
+	PINCTRL_PIN(15, "sda_1"),
+	PINCTRL_PIN(16, "x_ldd[16]"),
+	PINCTRL_PIN(17, "x_ldd[17]"),
+	PINCTRL_PIN(18, "x_ldd[18]"),
+	PINCTRL_PIN(19, "x_ldd[19]"),
+	PINCTRL_PIN(20, "x_ldd[20]"),
+	PINCTRL_PIN(21, "x_ldd[21]"),
+	PINCTRL_PIN(22, "x_ldd[22]"),
+	PINCTRL_PIN(23, "x_ldd[23]"),
+	PINCTRL_PIN(24, "gps_sgn"),
+	PINCTRL_PIN(25, "gps_mag"),
+	PINCTRL_PIN(26, "gps_clk"),
+	PINCTRL_PIN(27,	"sd_cd_b_2"),
+	PINCTRL_PIN(28, "sd_vcc_on_2"),
+	PINCTRL_PIN(29, "sd_wp_b_2"),
+	PINCTRL_PIN(30, "sd_clk_3"),
+	PINCTRL_PIN(31, "sd_cmd_3"),
+
+	PINCTRL_PIN(32, "x_sd_dat_3[0]"),
+	PINCTRL_PIN(33, "x_sd_dat_3[1]"),
+	PINCTRL_PIN(34, "x_sd_dat_3[2]"),
+	PINCTRL_PIN(35, "x_sd_dat_3[3]"),
+	PINCTRL_PIN(36, "usb_clk"),
+	PINCTRL_PIN(37, "usb_dir"),
+	PINCTRL_PIN(38, "usb_nxt"),
+	PINCTRL_PIN(39, "usb_stp"),
+	PINCTRL_PIN(40, "usb_dat[7]"),
+	PINCTRL_PIN(41, "usb_dat[6]"),
+	PINCTRL_PIN(42, "x_cko_1"),
+	PINCTRL_PIN(43, "spi_clk_1"),
+	PINCTRL_PIN(44, "spi_dout_1"),
+	PINCTRL_PIN(45, "spi_din_1"),
+	PINCTRL_PIN(46, "spi_en_1"),
+	PINCTRL_PIN(47, "x_txd_1"),
+	PINCTRL_PIN(48, "x_txd_2"),
+	PINCTRL_PIN(49, "x_rxd_1"),
+	PINCTRL_PIN(50, "x_rxd_2"),
+	PINCTRL_PIN(51, "x_usclk_0"),
+	PINCTRL_PIN(52, "x_utxd_0"),
+	PINCTRL_PIN(53, "x_urxd_0"),
+	PINCTRL_PIN(54, "x_utfs_0"),
+	PINCTRL_PIN(55, "x_urfs_0"),
+	PINCTRL_PIN(56, "usb_dat5"),
+	PINCTRL_PIN(57, "usb_dat4"),
+	PINCTRL_PIN(58, "usb_dat3"),
+	PINCTRL_PIN(59, "usb_dat2"),
+	PINCTRL_PIN(60, "usb_dat1"),
+	PINCTRL_PIN(61, "usb_dat0"),
+	PINCTRL_PIN(62, "x_ldd[14]"),
+	PINCTRL_PIN(63, "x_ldd[15]"),
+
+	PINCTRL_PIN(64, "x_gps_gpio"),
+	PINCTRL_PIN(65, "x_ldd[13]"),
+	PINCTRL_PIN(66, "x_df_we_b"),
+	PINCTRL_PIN(67, "x_df_re_b"),
+	PINCTRL_PIN(68, "x_txd_0"),
+	PINCTRL_PIN(69, "x_rxd_0"),
+	PINCTRL_PIN(70, "x_l_lck"),
+	PINCTRL_PIN(71, "x_l_fck"),
+	PINCTRL_PIN(72, "x_l_de"),
+	PINCTRL_PIN(73, "x_ldd[0]"),
+	PINCTRL_PIN(74, "x_ldd[1]"),
+	PINCTRL_PIN(75, "x_ldd[2]"),
+	PINCTRL_PIN(76, "x_ldd[3]"),
+	PINCTRL_PIN(77, "x_ldd[4]"),
+	PINCTRL_PIN(78, "x_cko_0"),
+	PINCTRL_PIN(79, "x_ldd[5]"),
+	PINCTRL_PIN(80, "x_ldd[6]"),
+	PINCTRL_PIN(81, "x_ldd[7]"),
+	PINCTRL_PIN(82, "x_ldd[8]"),
+	PINCTRL_PIN(83, "x_ldd[9]"),
+	PINCTRL_PIN(84, "x_ldd[10]"),
+	PINCTRL_PIN(85, "x_ldd[11]"),
+	PINCTRL_PIN(86, "x_ldd[12]"),
+	PINCTRL_PIN(87, "x_vip_vsync"),
+	PINCTRL_PIN(88, "x_vip_hsync"),
+	PINCTRL_PIN(89, "x_vip_pxclk"),
+	PINCTRL_PIN(90, "x_sda_0"),
+	PINCTRL_PIN(91, "x_scl_0"),
+	PINCTRL_PIN(92, "x_df_ry_by"),
+	PINCTRL_PIN(93, "x_df_cs_b[1]"),
+	PINCTRL_PIN(94, "x_df_cs_b[0]"),
+	PINCTRL_PIN(95, "x_l_pclk"),
+
+	PINCTRL_PIN(96, "x_df_dqs"),
+	PINCTRL_PIN(97, "x_df_wp_b"),
+	PINCTRL_PIN(98, "ac97_sync"),
+	PINCTRL_PIN(99, "ac97_bit_clk "),
+	PINCTRL_PIN(100, "ac97_dout"),
+	PINCTRL_PIN(101, "ac97_din"),
+	PINCTRL_PIN(102, "x_rtc_io"),
+};
+
+static const struct sirfsoc_muxmask lcd_16bits_sirfsoc_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(30) | BIT(31),
+	}, {
+		.group = 2,
+		.mask = BIT(1) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | BIT(10) | BIT(11) |
+			BIT(12) | BIT(13) | BIT(15) | BIT(16) | BIT(17) | BIT(18) | BIT(19) |
+			BIT(20) | BIT(21) | BIT(22) | BIT(31),
+	},
+};
+
+static const struct sirfsoc_padmux lcd_16bits_padmux = {
+	.muxmask_counts = ARRAY_SIZE(lcd_16bits_sirfsoc_muxmask),
+	.muxmask = lcd_16bits_sirfsoc_muxmask,
+	.funcmask = BIT(4),
+	.funcval = 0,
+};
+
+static const unsigned lcd_16bits_pins[] = { 62, 63, 65, 70, 71, 72, 73, 74, 75, 76, 77, 79, 80, 81, 82, 83,
+	84, 85, 86, 95 };
+
+static const struct sirfsoc_muxmask lcd_18bits_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(1) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | BIT(10) | BIT(11) |
+			BIT(12) | BIT(13) | BIT(15) | BIT(16) | BIT(17) | BIT(18) | BIT(19) |
+			BIT(20) | BIT(21) | BIT(22) | BIT(31),
+	}, {
+		.group = 1,
+		.mask = BIT(30) | BIT(31),
+	}, {
+		.group = 0,
+		.mask = BIT(16) | BIT(17),
+	},
+};
+
+static const struct sirfsoc_padmux lcd_18bits_padmux = {
+	.muxmask_counts = ARRAY_SIZE(lcd_18bits_muxmask),
+	.muxmask = lcd_18bits_muxmask,
+	.funcmask = BIT(4) | BIT(15),
+	.funcval = 0,
+};
+
+static const unsigned lcd_18bits_pins[] = { 16, 17, 62, 63, 65, 70, 71, 72, 73, 74, 75, 76, 77, 79, 80, 81, 82, 83,
+	84, 85, 86, 95 };
+
+static const struct sirfsoc_muxmask lcd_24bits_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(1) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | BIT(10) | BIT(11) |
+			BIT(12) | BIT(13) | BIT(15) | BIT(16) | BIT(17) | BIT(18) | BIT(19) |
+			BIT(20) | BIT(21) | BIT(22) | BIT(31),
+	}, {
+		.group = 1,
+		.mask = BIT(30) | BIT(31),
+	}, {
+		.group = 0,
+		.mask = BIT(16) | BIT(17) | BIT(18) | BIT(19) | BIT(20) | BIT(21) | BIT(22) | BIT(23),
+	},
+};
+
+static const struct sirfsoc_padmux lcd_24bits_padmux = {
+	.muxmask_counts = ARRAY_SIZE(lcd_24bits_muxmask),
+	.muxmask = lcd_24bits_muxmask,
+	.funcmask = BIT(4) | BIT(15),
+	.funcval = 0,
+};
+
+static const unsigned lcd_24bits_pins[] = { 16, 17, 18, 19, 20, 21, 22, 23, 62, 63, 65, 70, 71, 72, 73, 74, 75, 76, 77, 79,
+	80, 81, 82, 83, 84, 85, 86, 95};
+
+static const struct sirfsoc_muxmask lcdrom_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(1) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | BIT(10) | BIT(11) |
+			BIT(12) | BIT(13) | BIT(15) | BIT(16) | BIT(17) | BIT(18) | BIT(19) |
+			BIT(20) | BIT(21) | BIT(22) | BIT(31),
+	}, {
+		.group = 1,
+		.mask = BIT(30) | BIT(31),
+	}, {
+		.group = 0,
+		.mask = BIT(8),
+	},
+};
+
+static const struct sirfsoc_padmux lcdrom_padmux = {
+	.muxmask_counts = ARRAY_SIZE(lcdrom_muxmask),
+	.muxmask = lcdrom_muxmask,
+	.funcmask = BIT(4),
+	.funcval = BIT(4),
+};
+
+static const unsigned lcdrom_pins[] = { 8, 62, 63, 65, 70, 71, 72, 73, 74, 75, 76, 77, 79, 80, 81, 82, 83,
+	84, 85, 86, 95};
+
+static const struct sirfsoc_muxmask uart0_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(12),
+	}, {
+		.group = 1,
+		.mask = BIT(23),
+	}, {
+		.group = 2,
+		.mask = BIT(4) | BIT(5),
+	},
+};
+
+static const struct sirfsoc_padmux uart0_padmux = {
+	.muxmask_counts = ARRAY_SIZE(uart0_muxmask),
+	.muxmask = uart0_muxmask,
+	.funcmask = BIT(9),
+	.funcval = BIT(9),
+};
+
+static const unsigned uart0_pins[] = { 12, 55, 68, 69 };
+
+static const struct sirfsoc_muxmask uart0_nostreamctrl_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(4) | BIT(5),
+	},
+};
+
+static const struct sirfsoc_padmux uart0_nostreamctrl_padmux = {
+	.muxmask_counts = ARRAY_SIZE(uart0_nostreamctrl_muxmask),
+	.muxmask = uart0_nostreamctrl_muxmask,
+};
+
+static const unsigned uart0_nostreamctrl_pins[] = { 68, 69 };
+
+static const struct sirfsoc_muxmask uart1_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(15) | BIT(17),
+	},
+};
+
+static const struct sirfsoc_padmux uart1_padmux = {
+	.muxmask_counts = ARRAY_SIZE(uart1_muxmask),
+	.muxmask = uart1_muxmask,
+};
+
+static const unsigned uart1_pins[] = { 47, 49 };
+
+static const struct sirfsoc_muxmask uart2_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(10) | BIT(14),
+	}, {
+		.group = 1,
+		.mask = BIT(16) | BIT(18),
+	},
+};
+
+static const struct sirfsoc_padmux uart2_padmux = {
+	.muxmask_counts = ARRAY_SIZE(uart2_muxmask),
+	.muxmask = uart2_muxmask,
+	.funcmask = BIT(10),
+	.funcval = BIT(10),
+};
+
+static const unsigned uart2_pins[] = { 10, 14, 48, 50 };
+
+static const struct sirfsoc_muxmask uart2_nostreamctrl_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(16) | BIT(18),
+	},
+};
+
+static const struct sirfsoc_padmux uart2_nostreamctrl_padmux = {
+	.muxmask_counts = ARRAY_SIZE(uart2_nostreamctrl_muxmask),
+	.muxmask = uart2_nostreamctrl_muxmask,
+};
+
+static const unsigned uart2_nostreamctrl_pins[] = { 48, 50 };
+
+static const struct sirfsoc_muxmask sdmmc3_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(30) | BIT(31),
+	}, {
+		.group = 1,
+		.mask = BIT(0) | BIT(1) | BIT(2) | BIT(3),
+	},
+};
+
+static const struct sirfsoc_padmux sdmmc3_padmux = {
+	.muxmask_counts = ARRAY_SIZE(sdmmc3_muxmask),
+	.muxmask = sdmmc3_muxmask,
+	.funcmask = BIT(7),
+	.funcval = 0,
+};
+
+static const unsigned sdmmc3_pins[] = { 30, 31, 32, 33, 34, 35 };
+
+static const struct sirfsoc_muxmask spi0_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(30),
+	}, {
+		.group = 1,
+		.mask = BIT(0) | BIT(2) | BIT(3),
+	},
+};
+
+static const struct sirfsoc_padmux spi0_padmux = {
+	.muxmask_counts = ARRAY_SIZE(spi0_muxmask),
+	.muxmask = spi0_muxmask,
+	.funcmask = BIT(7),
+	.funcval = BIT(7),
+};
+
+static const unsigned spi0_pins[] = { 30, 32, 34, 35 };
+
+static const struct sirfsoc_muxmask cko1_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(10),
+	},
+};
+
+static const struct sirfsoc_padmux cko1_padmux = {
+	.muxmask_counts = ARRAY_SIZE(cko1_muxmask),
+	.muxmask = cko1_muxmask,
+	.funcmask = BIT(3),
+	.funcval = 0,
+};
+
+static const unsigned cko1_pins[] = { 42 };
+
+static const struct sirfsoc_muxmask i2s_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(10),
+	}, {
+		.group = 3,
+		.mask = BIT(2) | BIT(3) | BIT(4) | BIT(5),
+	},
+};
+
+static const struct sirfsoc_padmux i2s_padmux = {
+	.muxmask_counts = ARRAY_SIZE(i2s_muxmask),
+	.muxmask = i2s_muxmask,
+	.funcmask = BIT(3),
+	.funcval = BIT(3),
+};
+
+static const unsigned i2s_pins[] = { 42, 98, 99, 100, 101 };
+
+static const struct sirfsoc_muxmask i2s_no_din_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(10),
+	}, {
+		.group = 3,
+		.mask = BIT(2) | BIT(3) | BIT(4),
+	},
+};
+
+static const struct sirfsoc_padmux i2s_no_din_padmux = {
+	.muxmask_counts = ARRAY_SIZE(i2s_no_din_muxmask),
+	.muxmask = i2s_no_din_muxmask,
+	.funcmask = BIT(3),
+	.funcval = BIT(3),
+};
+
+static const unsigned i2s_no_din_pins[] = { 42, 98, 99, 100 };
+
+static const struct sirfsoc_muxmask i2s_6chn_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(10) | BIT(20) | BIT(23),
+	}, {
+		.group = 3,
+		.mask = BIT(2) | BIT(3) | BIT(4) | BIT(5),
+	},
+};
+
+static const struct sirfsoc_padmux i2s_6chn_padmux = {
+	.muxmask_counts = ARRAY_SIZE(i2s_6chn_muxmask),
+	.muxmask = i2s_6chn_muxmask,
+	.funcmask = BIT(1) | BIT(3) | BIT(9),
+	.funcval = BIT(1) | BIT(3) | BIT(9),
+};
+
+static const unsigned i2s_6chn_pins[] = { 42, 52, 55, 98, 99, 100, 101 };
+
+static const struct sirfsoc_muxmask ac97_muxmask[] = {
+	{
+		.group = 3,
+		.mask = BIT(2) | BIT(3) | BIT(4) | BIT(5),
+	},
+};
+
+static const struct sirfsoc_padmux ac97_padmux = {
+	.muxmask_counts = ARRAY_SIZE(ac97_muxmask),
+	.muxmask = ac97_muxmask,
+};
+
+static const unsigned ac97_pins[] = { 98, 99, 100, 101 };
+
+static const struct sirfsoc_muxmask spi1_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(11) | BIT(12) | BIT(13) | BIT(14),
+	},
+};
+
+static const struct sirfsoc_padmux spi1_padmux = {
+	.muxmask_counts = ARRAY_SIZE(spi1_muxmask),
+	.muxmask = spi1_muxmask,
+	.funcmask = BIT(16),
+	.funcval = 0,
+};
+
+static const unsigned spi1_pins[] = { 43, 44, 45, 46 };
+
+static const struct sirfsoc_muxmask sdmmc1_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(2) | BIT(3),
+	},
+};
+
+static const struct sirfsoc_padmux sdmmc1_padmux = {
+	.muxmask_counts = ARRAY_SIZE(sdmmc1_muxmask),
+	.muxmask = sdmmc1_muxmask,
+	.funcmask = BIT(5),
+	.funcval = BIT(5),
+};
+
+static const unsigned sdmmc1_pins[] = { 66, 67 };
+
+static const struct sirfsoc_muxmask gps_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(24) | BIT(25) | BIT(26),
+	},
+};
+
+static const struct sirfsoc_padmux gps_padmux = {
+	.muxmask_counts = ARRAY_SIZE(gps_muxmask),
+	.muxmask = gps_muxmask,
+	.funcmask = BIT(13),
+	.funcval = 0,
+};
+
+static const unsigned gps_pins[] = { 24, 25, 26 };
+
+static const struct sirfsoc_muxmask sdmmc5_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(24) | BIT(25) | BIT(26),
+	},
+};
+
+static const struct sirfsoc_padmux sdmmc5_padmux = {
+	.muxmask_counts = ARRAY_SIZE(sdmmc5_muxmask),
+	.muxmask = sdmmc5_muxmask,
+	.funcmask = BIT(13),
+	.funcval = BIT(13),
+};
+
+static const unsigned sdmmc5_pins[] = { 24, 25, 26 };
+
+static const struct sirfsoc_muxmask usp0_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(19) | BIT(20) | BIT(21) | BIT(22),
+	},
+};
+
+static const struct sirfsoc_padmux usp0_padmux = {
+	.muxmask_counts = ARRAY_SIZE(usp0_muxmask),
+	.muxmask = usp0_muxmask,
+	.funcmask = BIT(1) | BIT(2) | BIT(9),
+	.funcval = 0,
+};
+
+static const unsigned usp0_pins[] = { 51, 52, 53, 54 };
+
+static const struct sirfsoc_muxmask usp1_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(15),
+	}, {
+		.group = 1,
+		.mask = BIT(11) | BIT(12) | BIT(13) | BIT(14),
+	},
+};
+
+static const struct sirfsoc_padmux usp1_padmux = {
+	.muxmask_counts = ARRAY_SIZE(usp1_muxmask),
+	.muxmask = usp1_muxmask,
+	.funcmask = BIT(16),
+	.funcval = BIT(16),
+};
+
+static const unsigned usp1_pins[] = { 15, 43, 44, 45, 46 };
+
+static const struct sirfsoc_muxmask nand_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(2) | BIT(3) | BIT(28) | BIT(29) | BIT(30),
+	}, {
+		.group = 3,
+		.mask = BIT(0) | BIT(1),
+	},
+};
+
+static const struct sirfsoc_padmux nand_padmux = {
+	.muxmask_counts = ARRAY_SIZE(nand_muxmask),
+	.muxmask = nand_muxmask,
+	.funcmask = BIT(5) | BIT(19),
+	.funcval = 0,
+};
+
+static const unsigned nand_pins[] = { 66, 67, 92, 93, 94, 96, 97 };
+
+static const struct sirfsoc_muxmask sdmmc0_muxmask[] = {
+	{
+		.group = 3,
+		.mask = BIT(1),
+	},
+};
+
+static const struct sirfsoc_padmux sdmmc0_padmux = {
+	.muxmask_counts = ARRAY_SIZE(sdmmc0_muxmask),
+	.muxmask = sdmmc0_muxmask,
+	.funcmask = BIT(5) | BIT(19),
+	.funcval = BIT(19),
+};
+
+static const unsigned sdmmc0_pins[] = { 97 };
+
+static const struct sirfsoc_muxmask sdmmc2_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(27) | BIT(28) | BIT(29),
+	},
+};
+
+static const struct sirfsoc_padmux sdmmc2_padmux = {
+	.muxmask_counts = ARRAY_SIZE(sdmmc2_muxmask),
+	.muxmask = sdmmc2_muxmask,
+	.funcmask = BIT(11),
+	.funcval = 0,
+};
+
+static const unsigned sdmmc2_pins[] = { 27, 28, 29 };
+
+static const struct sirfsoc_muxmask sdmmc2_nowp_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(27) | BIT(28),
+	},
+};
+
+static const struct sirfsoc_padmux sdmmc2_nowp_padmux = {
+	.muxmask_counts = ARRAY_SIZE(sdmmc2_nowp_muxmask),
+	.muxmask = sdmmc2_nowp_muxmask,
+	.funcmask = BIT(11),
+	.funcval = 0,
+};
+
+static const unsigned sdmmc2_nowp_pins[] = { 27, 28 };
+
+static const struct sirfsoc_muxmask cko0_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(14),
+	},
+};
+
+static const struct sirfsoc_padmux cko0_padmux = {
+	.muxmask_counts = ARRAY_SIZE(cko0_muxmask),
+	.muxmask = cko0_muxmask,
+};
+
+static const unsigned cko0_pins[] = { 78 };
+
+static const struct sirfsoc_muxmask vip_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(4) | BIT(5) | BIT(6) | BIT(8) | BIT(9)
+			| BIT(24) | BIT(25) | BIT(26) | BIT(27) | BIT(28) |
+			BIT(29),
+	},
+};
+
+static const struct sirfsoc_padmux vip_padmux = {
+	.muxmask_counts = ARRAY_SIZE(vip_muxmask),
+	.muxmask = vip_muxmask,
+	.funcmask = BIT(18),
+	.funcval = BIT(18),
+};
+
+static const unsigned vip_pins[] = { 36, 37, 38, 40, 41, 56, 57, 58, 59, 60, 61 };
+
+static const struct sirfsoc_muxmask vip_noupli_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(16) | BIT(17) | BIT(18) | BIT(19) | BIT(20)
+			| BIT(21) | BIT(22) | BIT(23),
+	}, {
+		.group = 2,
+		.mask = BIT(23) | BIT(24) | BIT(25),
+	},
+};
+
+static const struct sirfsoc_padmux vip_noupli_padmux = {
+	.muxmask_counts = ARRAY_SIZE(vip_noupli_muxmask),
+	.muxmask = vip_noupli_muxmask,
+	.funcmask = BIT(15),
+	.funcval = BIT(15),
+};
+
+static const unsigned vip_noupli_pins[] = { 16, 17, 18, 19, 20, 21, 22, 23, 87, 88, 89 };
+
+static const struct sirfsoc_muxmask i2c0_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(26) | BIT(27),
+	},
+};
+
+static const struct sirfsoc_padmux i2c0_padmux = {
+	.muxmask_counts = ARRAY_SIZE(i2c0_muxmask),
+	.muxmask = i2c0_muxmask,
+};
+
+static const unsigned i2c0_pins[] = { 90, 91 };
+
+static const struct sirfsoc_muxmask i2c1_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(13) | BIT(15),
+	},
+};
+
+static const struct sirfsoc_padmux i2c1_padmux = {
+	.muxmask_counts = ARRAY_SIZE(i2c1_muxmask),
+	.muxmask = i2c1_muxmask,
+	.funcmask = BIT(16),
+	.funcval = 0,
+};
+
+static const unsigned i2c1_pins[] = { 13, 15 };
+
+static const struct sirfsoc_muxmask pwm0_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(4),
+	},
+};
+
+static const struct sirfsoc_padmux pwm0_padmux = {
+	.muxmask_counts = ARRAY_SIZE(pwm0_muxmask),
+	.muxmask = pwm0_muxmask,
+	.funcmask = BIT(12),
+	.funcval = 0,
+};
+
+static const unsigned pwm0_pins[] = { 4 };
+
+static const struct sirfsoc_muxmask pwm1_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(5),
+	},
+};
+
+static const struct sirfsoc_padmux pwm1_padmux = {
+	.muxmask_counts = ARRAY_SIZE(pwm1_muxmask),
+	.muxmask = pwm1_muxmask,
+};
+
+static const unsigned pwm1_pins[] = { 5 };
+
+static const struct sirfsoc_muxmask pwm2_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(6),
+	},
+};
+
+static const struct sirfsoc_padmux pwm2_padmux = {
+	.muxmask_counts = ARRAY_SIZE(pwm2_muxmask),
+	.muxmask = pwm2_muxmask,
+};
+
+static const unsigned pwm2_pins[] = { 6 };
+
+static const struct sirfsoc_muxmask pwm3_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(7),
+	},
+};
+
+static const struct sirfsoc_padmux pwm3_padmux = {
+	.muxmask_counts = ARRAY_SIZE(pwm3_muxmask),
+	.muxmask = pwm3_muxmask,
+};
+
+static const unsigned pwm3_pins[] = { 7 };
+
+static const struct sirfsoc_muxmask pwm4_muxmask[] = {
+	{
+		.group = 2,
+		.mask = BIT(14),
+	},
+};
+
+static const struct sirfsoc_padmux pwm4_padmux = {
+	.muxmask_counts = ARRAY_SIZE(pwm4_muxmask),
+	.muxmask = pwm4_muxmask,
+};
+
+static const unsigned pwm4_pins[] = { 78 };
+
+static const struct sirfsoc_muxmask warm_rst_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(8),
+	},
+};
+
+static const struct sirfsoc_padmux warm_rst_padmux = {
+	.muxmask_counts = ARRAY_SIZE(warm_rst_muxmask),
+	.muxmask = warm_rst_muxmask,
+	.funcmask = BIT(4),
+	.funcval = 0,
+};
+
+static const unsigned warm_rst_pins[] = { 8 };
+
+static const struct sirfsoc_muxmask usb0_upli_drvbus_muxmask[] = {
+	{
+		.group = 1,
+		.mask = BIT(4) | BIT(5) | BIT(6) | BIT(7) | BIT(8)
+			| BIT(9) | BIT(24) | BIT(25) | BIT(26) |
+			BIT(27) | BIT(28) | BIT(29),
+	},
+};
+static const struct sirfsoc_padmux usb0_upli_drvbus_padmux = {
+	.muxmask_counts = ARRAY_SIZE(usb0_upli_drvbus_muxmask),
+	.muxmask = usb0_upli_drvbus_muxmask,
+	.funcmask = BIT(18),
+	.funcval = 0,
+};
+
+static const unsigned usb0_upli_drvbus_pins[] = { 36, 37, 38, 39, 40, 41, 56, 57, 58, 59, 60, 61 };
+
+static const struct sirfsoc_muxmask usb1_utmi_drvbus_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(28),
+	},
+};
+
+static const struct sirfsoc_padmux usb1_utmi_drvbus_padmux = {
+	.muxmask_counts = ARRAY_SIZE(usb1_utmi_drvbus_muxmask),
+	.muxmask = usb1_utmi_drvbus_muxmask,
+	.funcmask = BIT(11),
+	.funcval = BIT(11), /* refer to PAD_UTMI_DRVVBUS1_ENABLE */
+};
+
+static const unsigned usb1_utmi_drvbus_pins[] = { 28 };
+
+static const struct sirfsoc_muxmask pulse_count_muxmask[] = {
+	{
+		.group = 0,
+		.mask = BIT(9) | BIT(10) | BIT(11),
+	},
+};
+
+static const struct sirfsoc_padmux pulse_count_padmux = {
+	.muxmask_counts = ARRAY_SIZE(pulse_count_muxmask),
+	.muxmask = pulse_count_muxmask,
+};
+
+static const unsigned pulse_count_pins[] = { 9, 10, 11 };
+
+static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
+	SIRFSOC_PIN_GROUP("lcd_16bitsgrp", lcd_16bits_pins),
+	SIRFSOC_PIN_GROUP("lcd_18bitsgrp", lcd_18bits_pins),
+	SIRFSOC_PIN_GROUP("lcd_24bitsgrp", lcd_24bits_pins),
+	SIRFSOC_PIN_GROUP("lcdrom_grp", lcdrom_pins),
+	SIRFSOC_PIN_GROUP("uart0grp", uart0_pins),
+	SIRFSOC_PIN_GROUP("uart1grp", uart1_pins),
+	SIRFSOC_PIN_GROUP("uart2grp", uart2_pins),
+	SIRFSOC_PIN_GROUP("uart2_nostreamctrlgrp", uart2_nostreamctrl_pins),
+	SIRFSOC_PIN_GROUP("usp0grp", usp0_pins),
+	SIRFSOC_PIN_GROUP("usp1grp", usp1_pins),
+	SIRFSOC_PIN_GROUP("i2c0grp", i2c0_pins),
+	SIRFSOC_PIN_GROUP("i2c1grp", i2c1_pins),
+	SIRFSOC_PIN_GROUP("pwm0grp", pwm0_pins),
+	SIRFSOC_PIN_GROUP("pwm1grp", pwm1_pins),
+	SIRFSOC_PIN_GROUP("pwm2grp", pwm2_pins),
+	SIRFSOC_PIN_GROUP("pwm3grp", pwm3_pins),
+	SIRFSOC_PIN_GROUP("pwm4grp", pwm4_pins),
+	SIRFSOC_PIN_GROUP("vipgrp", vip_pins),
+	SIRFSOC_PIN_GROUP("vip_noupligrp", vip_noupli_pins),
+	SIRFSOC_PIN_GROUP("warm_rstgrp", warm_rst_pins),
+	SIRFSOC_PIN_GROUP("cko0grp", cko0_pins),
+	SIRFSOC_PIN_GROUP("cko1grp", cko1_pins),
+	SIRFSOC_PIN_GROUP("sdmmc0grp", sdmmc0_pins),
+	SIRFSOC_PIN_GROUP("sdmmc1grp", sdmmc1_pins),
+	SIRFSOC_PIN_GROUP("sdmmc2grp", sdmmc2_pins),
+	SIRFSOC_PIN_GROUP("sdmmc2_nowpgrp", sdmmc2_nowp_pins),
+	SIRFSOC_PIN_GROUP("sdmmc3grp", sdmmc3_pins),
+	SIRFSOC_PIN_GROUP("sdmmc5grp", sdmmc5_pins),
+	SIRFSOC_PIN_GROUP("usb0_upli_drvbusgrp", usb0_upli_drvbus_pins),
+	SIRFSOC_PIN_GROUP("usb1_utmi_drvbusgrp", usb1_utmi_drvbus_pins),
+	SIRFSOC_PIN_GROUP("pulse_countgrp", pulse_count_pins),
+	SIRFSOC_PIN_GROUP("i2sgrp", i2s_pins),
+	SIRFSOC_PIN_GROUP("i2s_no_dingrp", i2s_no_din_pins),
+	SIRFSOC_PIN_GROUP("i2s_6chngrp", i2s_6chn_pins),
+	SIRFSOC_PIN_GROUP("ac97grp", ac97_pins),
+	SIRFSOC_PIN_GROUP("nandgrp", nand_pins),
+	SIRFSOC_PIN_GROUP("spi0grp", spi0_pins),
+	SIRFSOC_PIN_GROUP("spi1grp", spi1_pins),
+	SIRFSOC_PIN_GROUP("gpsgrp", gps_pins),
+};
+
+static const char * const lcd_16bitsgrp[] = { "lcd_16bitsgrp" };
+static const char * const lcd_18bitsgrp[] = { "lcd_18bitsgrp" };
+static const char * const lcd_24bitsgrp[] = { "lcd_24bitsgrp" };
+static const char * const lcdromgrp[] = { "lcdromgrp" };
+static const char * const uart0grp[] = { "uart0grp" };
+static const char * const uart1grp[] = { "uart1grp" };
+static const char * const uart2grp[] = { "uart2grp" };
+static const char * const uart2_nostreamctrlgrp[] = { "uart2_nostreamctrlgrp" };
+static const char * const usp0grp[] = { "usp0grp" };
+static const char * const usp1grp[] = { "usp1grp" };
+static const char * const i2c0grp[] = { "i2c0grp" };
+static const char * const i2c1grp[] = { "i2c1grp" };
+static const char * const pwm0grp[] = { "pwm0grp" };
+static const char * const pwm1grp[] = { "pwm1grp" };
+static const char * const pwm2grp[] = { "pwm2grp" };
+static const char * const pwm3grp[] = { "pwm3grp" };
+static const char * const pwm4grp[] = { "pwm4grp" };
+static const char * const vipgrp[] = { "vipgrp" };
+static const char * const vip_noupligrp[] = { "vip_noupligrp" };
+static const char * const warm_rstgrp[] = { "warm_rstgrp" };
+static const char * const cko0grp[] = { "cko0grp" };
+static const char * const cko1grp[] = { "cko1grp" };
+static const char * const sdmmc0grp[] = { "sdmmc0grp" };
+static const char * const sdmmc1grp[] = { "sdmmc1grp" };
+static const char * const sdmmc2grp[] = { "sdmmc2grp" };
+static const char * const sdmmc3grp[] = { "sdmmc3grp" };
+static const char * const sdmmc5grp[] = { "sdmmc5grp" };
+static const char * const sdmmc2_nowpgrp[] = { "sdmmc2_nowpgrp" };
+static const char * const usb0_upli_drvbusgrp[] = { "usb0_upli_drvbusgrp" };
+static const char * const usb1_utmi_drvbusgrp[] = { "usb1_utmi_drvbusgrp" };
+static const char * const pulse_countgrp[] = { "pulse_countgrp" };
+static const char * const i2sgrp[] = { "i2sgrp" };
+static const char * const i2s_no_dingrp[] = { "i2s_no_dingrp" };
+static const char * const i2s_6chngrp[] = { "i2s_6chngrp" };
+static const char * const ac97grp[] = { "ac97grp" };
+static const char * const nandgrp[] = { "nandgrp" };
+static const char * const spi0grp[] = { "spi0grp" };
+static const char * const spi1grp[] = { "spi1grp" };
+static const char * const gpsgrp[] = { "gpsgrp" };
+
+static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = {
+	SIRFSOC_PMX_FUNCTION("lcd_16bits", lcd_16bitsgrp, lcd_16bits_padmux),
+	SIRFSOC_PMX_FUNCTION("lcd_18bits", lcd_18bitsgrp, lcd_18bits_padmux),
+	SIRFSOC_PMX_FUNCTION("lcd_24bits", lcd_24bitsgrp, lcd_24bits_padmux),
+	SIRFSOC_PMX_FUNCTION("lcdrom", lcdromgrp, lcdrom_padmux),
+	SIRFSOC_PMX_FUNCTION("uart0", uart0grp, uart0_padmux),
+	SIRFSOC_PMX_FUNCTION("uart1", uart1grp, uart1_padmux),
+	SIRFSOC_PMX_FUNCTION("uart2", uart2grp, uart2_padmux),
+	SIRFSOC_PMX_FUNCTION("uart2_nostreamctrl", uart2_nostreamctrlgrp, uart2_nostreamctrl_padmux),
+	SIRFSOC_PMX_FUNCTION("usp0", usp0grp, usp0_padmux),
+	SIRFSOC_PMX_FUNCTION("usp1", usp1grp, usp1_padmux),
+	SIRFSOC_PMX_FUNCTION("i2c0", i2c0grp, i2c0_padmux),
+	SIRFSOC_PMX_FUNCTION("i2c1", i2c1grp, i2c1_padmux),
+	SIRFSOC_PMX_FUNCTION("pwm0", pwm0grp, pwm0_padmux),
+	SIRFSOC_PMX_FUNCTION("pwm1", pwm1grp, pwm1_padmux),
+	SIRFSOC_PMX_FUNCTION("pwm2", pwm2grp, pwm2_padmux),
+	SIRFSOC_PMX_FUNCTION("pwm3", pwm3grp, pwm3_padmux),
+	SIRFSOC_PMX_FUNCTION("pwm4", pwm4grp, pwm4_padmux),
+	SIRFSOC_PMX_FUNCTION("vip", vipgrp, vip_padmux),
+	SIRFSOC_PMX_FUNCTION("vip_noupli", vip_noupligrp, vip_noupli_padmux),
+	SIRFSOC_PMX_FUNCTION("warm_rst", warm_rstgrp, warm_rst_padmux),
+	SIRFSOC_PMX_FUNCTION("cko0", cko0grp, cko0_padmux),
+	SIRFSOC_PMX_FUNCTION("cko1", cko1grp, cko1_padmux),
+	SIRFSOC_PMX_FUNCTION("sdmmc0", sdmmc0grp, sdmmc0_padmux),
+	SIRFSOC_PMX_FUNCTION("sdmmc1", sdmmc1grp, sdmmc1_padmux),
+	SIRFSOC_PMX_FUNCTION("sdmmc2", sdmmc2grp, sdmmc2_padmux),
+	SIRFSOC_PMX_FUNCTION("sdmmc3", sdmmc3grp, sdmmc3_padmux),
+	SIRFSOC_PMX_FUNCTION("sdmmc5", sdmmc5grp, sdmmc5_padmux),
+	SIRFSOC_PMX_FUNCTION("sdmmc2_nowp", sdmmc2_nowpgrp, sdmmc2_nowp_padmux),
+	SIRFSOC_PMX_FUNCTION("usb0_upli_drvbus", usb0_upli_drvbusgrp, usb0_upli_drvbus_padmux),
+	SIRFSOC_PMX_FUNCTION("usb1_utmi_drvbus", usb1_utmi_drvbusgrp, usb1_utmi_drvbus_padmux),
+	SIRFSOC_PMX_FUNCTION("pulse_count", pulse_countgrp, pulse_count_padmux),
+	SIRFSOC_PMX_FUNCTION("i2s", i2sgrp, i2s_padmux),
+	SIRFSOC_PMX_FUNCTION("i2s_no_din", i2s_no_dingrp, i2s_no_din_padmux),
+	SIRFSOC_PMX_FUNCTION("i2s_6chn", i2s_6chngrp, i2s_6chn_padmux),
+	SIRFSOC_PMX_FUNCTION("ac97", ac97grp, ac97_padmux),
+	SIRFSOC_PMX_FUNCTION("nand", nandgrp, nand_padmux),
+	SIRFSOC_PMX_FUNCTION("spi0", spi0grp, spi0_padmux),
+	SIRFSOC_PMX_FUNCTION("spi1", spi1grp, spi1_padmux),
+	SIRFSOC_PMX_FUNCTION("gps", gpsgrp, gps_padmux),
+};
+
+struct sirfsoc_pinctrl_data atlas6_pinctrl_data = {
+	(struct pinctrl_pin_desc *)sirfsoc_pads,
+	ARRAY_SIZE(sirfsoc_pads),
+	(struct sirfsoc_pin_group *)sirfsoc_pin_groups,
+	ARRAY_SIZE(sirfsoc_pin_groups),
+	(struct sirfsoc_pmx_func *)sirfsoc_pmx_functions,
+	ARRAY_SIZE(sirfsoc_pmx_functions),
+};
+
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/sirf/pinctrl-prima2.c
index bc9d1be27fb..1f0ad1ef5a3 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/sirf/pinctrl-prima2.c
@@ -1,70 +1,15 @@
 /*
- * pinmux driver for CSR SiRFprimaII
+ * pinctrl pads, groups, functions for CSR SiRFprimaII
  *
  * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
  *
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip/chained_irq.h>
 #include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
 #include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
-
-#define DRIVER_NAME "pinmux-sirf"
-
-#define SIRFSOC_NUM_PADS    622
-#define SIRFSOC_RSC_PIN_MUX 0x4
-
-#define SIRFSOC_GPIO_PAD_EN(g)		((g)*0x100 + 0x84)
-#define SIRFSOC_GPIO_PAD_EN_CLR(g)	((g)*0x100 + 0x90)
-#define SIRFSOC_GPIO_CTRL(g, i)			((g)*0x100 + (i)*4)
-#define SIRFSOC_GPIO_DSP_EN0			(0x80)
-#define SIRFSOC_GPIO_INT_STATUS(g)		((g)*0x100 + 0x8C)
-
-#define SIRFSOC_GPIO_CTL_INTR_LOW_MASK		0x1
-#define SIRFSOC_GPIO_CTL_INTR_HIGH_MASK		0x2
-#define SIRFSOC_GPIO_CTL_INTR_TYPE_MASK		0x4
-#define SIRFSOC_GPIO_CTL_INTR_EN_MASK		0x8
-#define SIRFSOC_GPIO_CTL_INTR_STS_MASK		0x10
-#define SIRFSOC_GPIO_CTL_OUT_EN_MASK		0x20
-#define SIRFSOC_GPIO_CTL_DATAOUT_MASK		0x40
-#define SIRFSOC_GPIO_CTL_DATAIN_MASK		0x80
-#define SIRFSOC_GPIO_CTL_PULL_MASK		0x100
-#define SIRFSOC_GPIO_CTL_PULL_HIGH		0x200
-#define SIRFSOC_GPIO_CTL_DSP_INT		0x400
-
-#define SIRFSOC_GPIO_NO_OF_BANKS        5
-#define SIRFSOC_GPIO_BANK_SIZE          32
-#define SIRFSOC_GPIO_NUM(bank, index)	(((bank)*(32)) + (index))
-
-struct sirfsoc_gpio_bank {
-	struct of_mm_gpio_chip chip;
-	struct irq_domain *domain;
-	int id;
-	int parent_irq;
-	spinlock_t lock;
-	bool is_marco; /* for marco, some registers are different with prima2 */
-};
-
-static struct sirfsoc_gpio_bank sgpio_bank[SIRFSOC_GPIO_NO_OF_BANKS];
-static DEFINE_SPINLOCK(sgpio_lock);
+
+#include "pinctrl-sirf.h"
 
 /*
  * pad list for the pinmux subsystem
@@ -183,46 +128,6 @@ static const struct pinctrl_pin_desc sirfsoc_pads[] = {
 	PINCTRL_PIN(114, "x_ldd[15]"),
 };
 
-/**
- * @dev: a pointer back to containing device
- * @virtbase: the offset to the controller in virtual memory
- */
-struct sirfsoc_pmx {
-	struct device *dev;
-	struct pinctrl_dev *pmx;
-	void __iomem *gpio_virtbase;
-	void __iomem *rsc_virtbase;
-	bool is_marco;
-};
-
-/* SIRFSOC_GPIO_PAD_EN set */
-struct sirfsoc_muxmask {
-	unsigned long group;
-	unsigned long mask;
-};
-
-struct sirfsoc_padmux {
-	unsigned long muxmask_counts;
-	const struct sirfsoc_muxmask *muxmask;
-	/* RSC_PIN_MUX set */
-	unsigned long funcmask;
-	unsigned long funcval;
-};
-
- /**
- * struct sirfsoc_pin_group - describes a SiRFprimaII pin group
- * @name: the name of this specific pin group
- * @pins: an array of discrete physical pins used in this group, taken
- *	from the driver-local pin enumeration space
- * @num_pins: the number of pins in this group array, i.e. the number of
- *	elements in .pins so we can iterate over that array
- */
-struct sirfsoc_pin_group {
-	const char *name;
-	const unsigned int *pins;
-	const unsigned num_pins;
-};
-
 static const struct sirfsoc_muxmask lcd_16bits_sirfsoc_muxmask[] = {
 	{
 		.group = 3,
@@ -351,7 +256,7 @@ static const struct sirfsoc_padmux uart0_nostreamctrl_padmux = {
 	.muxmask = uart0_nostreamctrl_muxmask,
 };
 
-static const unsigned uart0_nostreamctrl_pins[] = { 68, 39 };
+static const unsigned uart0_nostreamctrl_pins[] = { 68, 69 };
 
 static const struct sirfsoc_muxmask uart1_muxmask[] = {
 	{
@@ -853,13 +758,6 @@ static const struct sirfsoc_padmux pulse_count_padmux = {
 
 static const unsigned pulse_count_pins[] = { 9, 10, 11 };
 
-#define SIRFSOC_PIN_GROUP(n, p)  \
-	{			\
-		.name = n,	\
-		.pins = p,	\
-		.num_pins = ARRAY_SIZE(p),	\
-	}
-
 static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
 	SIRFSOC_PIN_GROUP("lcd_16bitsgrp", lcd_16bits_pins),
 	SIRFSOC_PIN_GROUP("lcd_18bitsgrp", lcd_18bits_pins),
@@ -881,8 +779,8 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
 	SIRFSOC_PIN_GROUP("vipgrp", vip_pins),
 	SIRFSOC_PIN_GROUP("vipromgrp", viprom_pins),
 	SIRFSOC_PIN_GROUP("warm_rstgrp", warm_rst_pins),
-	SIRFSOC_PIN_GROUP("cko0_rstgrp", cko0_pins),
-	SIRFSOC_PIN_GROUP("cko1_rstgrp", cko1_pins),
+	SIRFSOC_PIN_GROUP("cko0grp", cko0_pins),
+	SIRFSOC_PIN_GROUP("cko1grp", cko1_pins),
 	SIRFSOC_PIN_GROUP("sdmmc0grp", sdmmc0_pins),
 	SIRFSOC_PIN_GROUP("sdmmc1grp", sdmmc1_pins),
 	SIRFSOC_PIN_GROUP("sdmmc2grp", sdmmc2_pins),
@@ -900,101 +798,6 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = {
 	SIRFSOC_PIN_GROUP("gpsgrp", gps_pins),
 };
 
-static int sirfsoc_get_groups_count(struct pinctrl_dev *pctldev)
-{
-	return ARRAY_SIZE(sirfsoc_pin_groups);
-}
-
-static const char *sirfsoc_get_group_name(struct pinctrl_dev *pctldev,
-				       unsigned selector)
-{
-	return sirfsoc_pin_groups[selector].name;
-}
-
-static int sirfsoc_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
-			       const unsigned **pins,
-			       unsigned *num_pins)
-{
-	*pins = sirfsoc_pin_groups[selector].pins;
-	*num_pins = sirfsoc_pin_groups[selector].num_pins;
-	return 0;
-}
-
-static void sirfsoc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
-		   unsigned offset)
-{
-	seq_printf(s, " " DRIVER_NAME);
-}
-
-static int sirfsoc_dt_node_to_map(struct pinctrl_dev *pctldev,
-				 struct device_node *np_config,
-				 struct pinctrl_map **map, unsigned *num_maps)
-{
-	struct sirfsoc_pmx *spmx = pinctrl_dev_get_drvdata(pctldev);
-	struct device_node *np;
-	struct property *prop;
-	const char *function, *group;
-	int ret, index = 0, count = 0;
-
-	/* calculate number of maps required */
-	for_each_child_of_node(np_config, np) {
-		ret = of_property_read_string(np, "sirf,function", &function);
-		if (ret < 0)
-			return ret;
-
-		ret = of_property_count_strings(np, "sirf,pins");
-		if (ret < 0)
-			return ret;
-
-		count += ret;
-	}
-
-	if (!count) {
-		dev_err(spmx->dev, "No child nodes passed via DT\n");
-		return -ENODEV;
-	}
-
-	*map = kzalloc(sizeof(**map) * count, GFP_KERNEL);
-	if (!*map)
-		return -ENOMEM;
-
-	for_each_child_of_node(np_config, np) {
-		of_property_read_string(np, "sirf,function", &function);
-		of_property_for_each_string(np, "sirf,pins", prop, group) {
-			(*map)[index].type = PIN_MAP_TYPE_MUX_GROUP;
-			(*map)[index].data.mux.group = group;
-			(*map)[index].data.mux.function = function;
-			index++;
-		}
-	}
-
-	*num_maps = count;
-
-	return 0;
-}
-
-static void sirfsoc_dt_free_map(struct pinctrl_dev *pctldev,
-		struct pinctrl_map *map, unsigned num_maps)
-{
-	kfree(map);
-}
-
-static const struct pinctrl_ops sirfsoc_pctrl_ops = {
-	.get_groups_count = sirfsoc_get_groups_count,
-	.get_group_name = sirfsoc_get_group_name,
-	.get_group_pins = sirfsoc_get_group_pins,
-	.pin_dbg_show = sirfsoc_pin_dbg_show,
-	.dt_node_to_map = sirfsoc_dt_node_to_map,
-	.dt_free_map = sirfsoc_dt_free_map,
-};
-
-struct sirfsoc_pmx_func {
-	const char *name;
-	const char * const *groups;
-	const unsigned num_groups;
-	const struct sirfsoc_padmux *padmux;
-};
-
 static const char * const lcd_16bitsgrp[] = { "lcd_16bitsgrp" };
 static const char * const lcd_18bitsgrp[] = { "lcd_18bitsgrp" };
 static const char * const lcd_24bitsgrp[] = { "lcd_24bitsgrp" };
@@ -1033,14 +836,6 @@ static const char * const spi0grp[] = { "spi0grp" };
 static const char * const spi1grp[] = { "spi1grp" };
 static const char * const gpsgrp[] = { "gpsgrp" };
 
-#define SIRFSOC_PMX_FUNCTION(n, g, m)		\
-	{					\
-		.name = n,			\
-		.groups = g,			\
-		.num_groups = ARRAY_SIZE(g),	\
-		.padmux = &m,			\
-	}
-
 static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = {
 	SIRFSOC_PMX_FUNCTION("lcd_16bits", lcd_16bitsgrp, lcd_16bits_padmux),
 	SIRFSOC_PMX_FUNCTION("lcd_18bits", lcd_18bitsgrp, lcd_18bits_padmux),
@@ -1081,730 +876,12 @@ static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = {
 	SIRFSOC_PMX_FUNCTION("gps", gpsgrp, gps_padmux),
 };
 
-static void sirfsoc_pinmux_endisable(struct sirfsoc_pmx *spmx, unsigned selector,
-	bool enable)
-{
-	int i;
-	const struct sirfsoc_padmux *mux = sirfsoc_pmx_functions[selector].padmux;
-	const struct sirfsoc_muxmask *mask = mux->muxmask;
-
-	for (i = 0; i < mux->muxmask_counts; i++) {
-		u32 muxval;
-		if (!spmx->is_marco) {
-			muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group));
-			if (enable)
-				muxval = muxval & ~mask[i].mask;
-			else
-				muxval = muxval | mask[i].mask;
-			writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group));
-		} else {
-			if (enable)
-				writel(mask[i].mask, spmx->gpio_virtbase +
-					SIRFSOC_GPIO_PAD_EN_CLR(mask[i].group));
-			else
-				writel(mask[i].mask, spmx->gpio_virtbase +
-					SIRFSOC_GPIO_PAD_EN(mask[i].group));
-		}
-	}
-
-	if (mux->funcmask && enable) {
-		u32 func_en_val;
-		func_en_val =
-			readl(spmx->rsc_virtbase + SIRFSOC_RSC_PIN_MUX);
-		func_en_val =
-			(func_en_val & ~mux->funcmask) | (mux->
-				funcval);
-		writel(func_en_val, spmx->rsc_virtbase + SIRFSOC_RSC_PIN_MUX);
-	}
-}
-
-static int sirfsoc_pinmux_enable(struct pinctrl_dev *pmxdev, unsigned selector,
-	unsigned group)
-{
-	struct sirfsoc_pmx *spmx;
-
-	spmx = pinctrl_dev_get_drvdata(pmxdev);
-	sirfsoc_pinmux_endisable(spmx, selector, true);
-
-	return 0;
-}
-
-static void sirfsoc_pinmux_disable(struct pinctrl_dev *pmxdev, unsigned selector,
-	unsigned group)
-{
-	struct sirfsoc_pmx *spmx;
-
-	spmx = pinctrl_dev_get_drvdata(pmxdev);
-	sirfsoc_pinmux_endisable(spmx, selector, false);
-}
-
-static int sirfsoc_pinmux_get_funcs_count(struct pinctrl_dev *pmxdev)
-{
-	return ARRAY_SIZE(sirfsoc_pmx_functions);
-}
-
-static const char *sirfsoc_pinmux_get_func_name(struct pinctrl_dev *pctldev,
-					  unsigned selector)
-{
-	return sirfsoc_pmx_functions[selector].name;
-}
-
-static int sirfsoc_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
-			       const char * const **groups,
-			       unsigned * const num_groups)
-{
-	*groups = sirfsoc_pmx_functions[selector].groups;
-	*num_groups = sirfsoc_pmx_functions[selector].num_groups;
-	return 0;
-}
-
-static int sirfsoc_pinmux_request_gpio(struct pinctrl_dev *pmxdev,
-	struct pinctrl_gpio_range *range, unsigned offset)
-{
-	struct sirfsoc_pmx *spmx;
-
-	int group = range->id;
-
-	u32 muxval;
-
-	spmx = pinctrl_dev_get_drvdata(pmxdev);
-
-	if (!spmx->is_marco) {
-		muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
-		muxval = muxval | (1 << (offset - range->pin_base));
-		writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
-	} else {
-		writel(1 << (offset - range->pin_base), spmx->gpio_virtbase +
-			SIRFSOC_GPIO_PAD_EN(group));
-	}
-
-	return 0;
-}
-
-static const struct pinmux_ops sirfsoc_pinmux_ops = {
-	.enable = sirfsoc_pinmux_enable,
-	.disable = sirfsoc_pinmux_disable,
-	.get_functions_count = sirfsoc_pinmux_get_funcs_count,
-	.get_function_name = sirfsoc_pinmux_get_func_name,
-	.get_function_groups = sirfsoc_pinmux_get_groups,
-	.gpio_request_enable = sirfsoc_pinmux_request_gpio,
-};
-
-static struct pinctrl_desc sirfsoc_pinmux_desc = {
-	.name = DRIVER_NAME,
-	.pins = sirfsoc_pads,
-	.npins = ARRAY_SIZE(sirfsoc_pads),
-	.pctlops = &sirfsoc_pctrl_ops,
-	.pmxops = &sirfsoc_pinmux_ops,
-	.owner = THIS_MODULE,
-};
-
-/*
- * Todo: bind irq_chip to every pinctrl_gpio_range
- */
-static struct pinctrl_gpio_range sirfsoc_gpio_ranges[] = {
-	{
-		.name = "sirfsoc-gpio*",
-		.id = 0,
-		.base = 0,
-		.pin_base = 0,
-		.npins = 32,
-	}, {
-		.name = "sirfsoc-gpio*",
-		.id = 1,
-		.base = 32,
-		.pin_base = 32,
-		.npins = 32,
-	}, {
-		.name = "sirfsoc-gpio*",
-		.id = 2,
-		.base = 64,
-		.pin_base = 64,
-		.npins = 32,
-	}, {
-		.name = "sirfsoc-gpio*",
-		.id = 3,
-		.base = 96,
-		.pin_base = 96,
-		.npins = 19,
-	},
-};
-
-static void __iomem *sirfsoc_rsc_of_iomap(void)
-{
-	const struct of_device_id rsc_ids[]  = {
-		{ .compatible = "sirf,prima2-rsc" },
-		{ .compatible = "sirf,marco-rsc" },
-		{}
-	};
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, rsc_ids);
-	if (!np)
-		panic("unable to find compatible rsc node in dtb\n");
-
-	return of_iomap(np, 0);
-}
-
-static int sirfsoc_gpio_of_xlate(struct gpio_chip *gc,
-       const struct of_phandle_args *gpiospec,
-       u32 *flags)
-{
-       if (gpiospec->args[0] > SIRFSOC_GPIO_NO_OF_BANKS * SIRFSOC_GPIO_BANK_SIZE)
-               return -EINVAL;
-
-       if (gc != &sgpio_bank[gpiospec->args[0] / SIRFSOC_GPIO_BANK_SIZE].chip.gc)
-               return -EINVAL;
-
-       if (flags)
-               *flags = gpiospec->args[1];
-
-       return gpiospec->args[0] % SIRFSOC_GPIO_BANK_SIZE;
-}
-
-static int sirfsoc_pinmux_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sirfsoc_pmx *spmx;
-	struct device_node *np = pdev->dev.of_node;
-	int i;
-
-	/* Create state holders etc for this driver */
-	spmx = devm_kzalloc(&pdev->dev, sizeof(*spmx), GFP_KERNEL);
-	if (!spmx)
-		return -ENOMEM;
-
-	spmx->dev = &pdev->dev;
-
-	platform_set_drvdata(pdev, spmx);
-
-	spmx->gpio_virtbase = of_iomap(np, 0);
-	if (!spmx->gpio_virtbase) {
-		ret = -ENOMEM;
-		dev_err(&pdev->dev, "can't map gpio registers\n");
-		goto out_no_gpio_remap;
-	}
-
-	spmx->rsc_virtbase = sirfsoc_rsc_of_iomap();
-	if (!spmx->rsc_virtbase) {
-		ret = -ENOMEM;
-		dev_err(&pdev->dev, "can't map rsc registers\n");
-		goto out_no_rsc_remap;
-	}
-
-	if (of_device_is_compatible(np, "sirf,marco-pinctrl"))
-		spmx->is_marco = 1;
-
-	/* Now register the pin controller and all pins it handles */
-	spmx->pmx = pinctrl_register(&sirfsoc_pinmux_desc, &pdev->dev, spmx);
-	if (!spmx->pmx) {
-		dev_err(&pdev->dev, "could not register SIRFSOC pinmux driver\n");
-		ret = -EINVAL;
-		goto out_no_pmx;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(sirfsoc_gpio_ranges); i++) {
-		sirfsoc_gpio_ranges[i].gc = &sgpio_bank[i].chip.gc;
-		pinctrl_add_gpio_range(spmx->pmx, &sirfsoc_gpio_ranges[i]);
-	}
-
-	dev_info(&pdev->dev, "initialized SIRFSOC pinmux driver\n");
-
-	return 0;
-
-out_no_pmx:
-	iounmap(spmx->rsc_virtbase);
-out_no_rsc_remap:
-	iounmap(spmx->gpio_virtbase);
-out_no_gpio_remap:
-	platform_set_drvdata(pdev, NULL);
-	return ret;
-}
-
-static const struct of_device_id pinmux_ids[] = {
-	{ .compatible = "sirf,prima2-pinctrl" },
-	{ .compatible = "sirf,marco-pinctrl" },
-	{}
-};
-
-static struct platform_driver sirfsoc_pinmux_driver = {
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = pinmux_ids,
-	},
-	.probe = sirfsoc_pinmux_probe,
+struct sirfsoc_pinctrl_data prima2_pinctrl_data = {
+	(struct pinctrl_pin_desc *)sirfsoc_pads,
+	ARRAY_SIZE(sirfsoc_pads),
+	(struct sirfsoc_pin_group *)sirfsoc_pin_groups,
+	ARRAY_SIZE(sirfsoc_pin_groups),
+	(struct sirfsoc_pmx_func *)sirfsoc_pmx_functions,
+	ARRAY_SIZE(sirfsoc_pmx_functions),
 };
 
-static int __init sirfsoc_pinmux_init(void)
-{
-	return platform_driver_register(&sirfsoc_pinmux_driver);
-}
-arch_initcall(sirfsoc_pinmux_init);
-
-static inline int sirfsoc_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct sirfsoc_gpio_bank *bank = container_of(to_of_mm_gpio_chip(chip),
-		struct sirfsoc_gpio_bank, chip);
-
-	return irq_create_mapping(bank->domain, offset);
-}
-
-static inline int sirfsoc_gpio_to_offset(unsigned int gpio)
-{
-	return gpio % SIRFSOC_GPIO_BANK_SIZE;
-}
-
-static inline struct sirfsoc_gpio_bank *sirfsoc_gpio_to_bank(unsigned int gpio)
-{
-	return &sgpio_bank[gpio / SIRFSOC_GPIO_BANK_SIZE];
-}
-
-static inline struct sirfsoc_gpio_bank *sirfsoc_irqchip_to_bank(struct gpio_chip *chip)
-{
-	return container_of(to_of_mm_gpio_chip(chip), struct sirfsoc_gpio_bank, chip);
-}
-
-static void sirfsoc_gpio_irq_ack(struct irq_data *d)
-{
-	struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
-	u32 val, offset;
-	unsigned long flags;
-
-	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
-
-	spin_lock_irqsave(&sgpio_lock, flags);
-
-	val = readl(bank->chip.regs + offset);
-
-	writel(val, bank->chip.regs + offset);
-
-	spin_unlock_irqrestore(&sgpio_lock, flags);
-}
-
-static void __sirfsoc_gpio_irq_mask(struct sirfsoc_gpio_bank *bank, int idx)
-{
-	u32 val, offset;
-	unsigned long flags;
-
-	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
-
-	spin_lock_irqsave(&sgpio_lock, flags);
-
-	val = readl(bank->chip.regs + offset);
-	val &= ~SIRFSOC_GPIO_CTL_INTR_EN_MASK;
-	val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
-	writel(val, bank->chip.regs + offset);
-
-	spin_unlock_irqrestore(&sgpio_lock, flags);
-}
-
-static void sirfsoc_gpio_irq_mask(struct irq_data *d)
-{
-	struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
-	__sirfsoc_gpio_irq_mask(bank, d->hwirq % SIRFSOC_GPIO_BANK_SIZE);
-}
-
-static void sirfsoc_gpio_irq_unmask(struct irq_data *d)
-{
-	struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
-	u32 val, offset;
-	unsigned long flags;
-
-	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
-
-	spin_lock_irqsave(&sgpio_lock, flags);
-
-	val = readl(bank->chip.regs + offset);
-	val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
-	val |= SIRFSOC_GPIO_CTL_INTR_EN_MASK;
-	writel(val, bank->chip.regs + offset);
-
-	spin_unlock_irqrestore(&sgpio_lock, flags);
-}
-
-static int sirfsoc_gpio_irq_type(struct irq_data *d, unsigned type)
-{
-	struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
-	u32 val, offset;
-	unsigned long flags;
-
-	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
-
-	spin_lock_irqsave(&sgpio_lock, flags);
-
-	val = readl(bank->chip.regs + offset);
-	val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
-		val &= ~SIRFSOC_GPIO_CTL_INTR_LOW_MASK;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		val &= ~SIRFSOC_GPIO_CTL_INTR_HIGH_MASK;
-		val |= SIRFSOC_GPIO_CTL_INTR_LOW_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_LOW_MASK |
-			 SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		val &= ~(SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK);
-		val |= SIRFSOC_GPIO_CTL_INTR_LOW_MASK;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK;
-		val &= ~(SIRFSOC_GPIO_CTL_INTR_LOW_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK);
-		break;
-	}
-
-	writel(val, bank->chip.regs + offset);
-
-	spin_unlock_irqrestore(&sgpio_lock, flags);
-
-	return 0;
-}
-
-static struct irq_chip sirfsoc_irq_chip = {
-	.name = "sirf-gpio-irq",
-	.irq_ack = sirfsoc_gpio_irq_ack,
-	.irq_mask = sirfsoc_gpio_irq_mask,
-	.irq_unmask = sirfsoc_gpio_irq_unmask,
-	.irq_set_type = sirfsoc_gpio_irq_type,
-};
-
-static void sirfsoc_gpio_handle_irq(unsigned int irq, struct irq_desc *desc)
-{
-	struct sirfsoc_gpio_bank *bank = irq_get_handler_data(irq);
-	u32 status, ctrl;
-	int idx = 0;
-	struct irq_chip *chip = irq_get_chip(irq);
-
-	chained_irq_enter(chip, desc);
-
-	status = readl(bank->chip.regs + SIRFSOC_GPIO_INT_STATUS(bank->id));
-	if (!status) {
-		printk(KERN_WARNING
-			"%s: gpio id %d status %#x no interrupt is flaged\n",
-			__func__, bank->id, status);
-		handle_bad_irq(irq, desc);
-		return;
-	}
-
-	while (status) {
-		ctrl = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, idx));
-
-		/*
-		 * Here we must check whether the corresponding GPIO's interrupt
-		 * has been enabled, otherwise just skip it
-		 */
-		if ((status & 0x1) && (ctrl & SIRFSOC_GPIO_CTL_INTR_EN_MASK)) {
-			pr_debug("%s: gpio id %d idx %d happens\n",
-				__func__, bank->id, idx);
-			generic_handle_irq(irq_find_mapping(bank->domain, idx));
-		}
-
-		idx++;
-		status = status >> 1;
-	}
-
-	chained_irq_exit(chip, desc);
-}
-
-static inline void sirfsoc_gpio_set_input(struct sirfsoc_gpio_bank *bank, unsigned ctrl_offset)
-{
-	u32 val;
-
-	val = readl(bank->chip.regs + ctrl_offset);
-	val &= ~SIRFSOC_GPIO_CTL_OUT_EN_MASK;
-	writel(val, bank->chip.regs + ctrl_offset);
-}
-
-static int sirfsoc_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
-	unsigned long flags;
-
-	if (pinctrl_request_gpio(chip->base + offset))
-		return -ENODEV;
-
-	spin_lock_irqsave(&bank->lock, flags);
-
-	/*
-	 * default status:
-	 * set direction as input and mask irq
-	 */
-	sirfsoc_gpio_set_input(bank, SIRFSOC_GPIO_CTRL(bank->id, offset));
-	__sirfsoc_gpio_irq_mask(bank, offset);
-
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return 0;
-}
-
-static void sirfsoc_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
-	unsigned long flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-
-	__sirfsoc_gpio_irq_mask(bank, offset);
-	sirfsoc_gpio_set_input(bank, SIRFSOC_GPIO_CTRL(bank->id, offset));
-
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	pinctrl_free_gpio(chip->base + offset);
-}
-
-static int sirfsoc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
-	int idx = sirfsoc_gpio_to_offset(gpio);
-	unsigned long flags;
-	unsigned offset;
-
-	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
-
-	spin_lock_irqsave(&bank->lock, flags);
-
-	sirfsoc_gpio_set_input(bank, offset);
-
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return 0;
-}
-
-static inline void sirfsoc_gpio_set_output(struct sirfsoc_gpio_bank *bank, unsigned offset,
-	int value)
-{
-	u32 out_ctrl;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-
-	out_ctrl = readl(bank->chip.regs + offset);
-	if (value)
-		out_ctrl |= SIRFSOC_GPIO_CTL_DATAOUT_MASK;
-	else
-		out_ctrl &= ~SIRFSOC_GPIO_CTL_DATAOUT_MASK;
-
-	out_ctrl &= ~SIRFSOC_GPIO_CTL_INTR_EN_MASK;
-	out_ctrl |= SIRFSOC_GPIO_CTL_OUT_EN_MASK;
-	writel(out_ctrl, bank->chip.regs + offset);
-
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-
-static int sirfsoc_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
-	int idx = sirfsoc_gpio_to_offset(gpio);
-	u32 offset;
-	unsigned long flags;
-
-	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
-
-	spin_lock_irqsave(&sgpio_lock, flags);
-
-	sirfsoc_gpio_set_output(bank, offset, value);
-
-	spin_unlock_irqrestore(&sgpio_lock, flags);
-
-	return 0;
-}
-
-static int sirfsoc_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
-	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
-	u32 val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-
-	val = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
-
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return !!(val & SIRFSOC_GPIO_CTL_DATAIN_MASK);
-}
-
-static void sirfsoc_gpio_set_value(struct gpio_chip *chip, unsigned offset,
-	int value)
-{
-	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
-	u32 ctrl;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bank->lock, flags);
-
-	ctrl = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
-	if (value)
-		ctrl |= SIRFSOC_GPIO_CTL_DATAOUT_MASK;
-	else
-		ctrl &= ~SIRFSOC_GPIO_CTL_DATAOUT_MASK;
-	writel(ctrl, bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
-
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-
-static int sirfsoc_gpio_irq_map(struct irq_domain *d, unsigned int irq,
-				irq_hw_number_t hwirq)
-{
-	struct sirfsoc_gpio_bank *bank = d->host_data;
-
-	if (!bank)
-		return -EINVAL;
-
-	irq_set_chip(irq, &sirfsoc_irq_chip);
-	irq_set_handler(irq, handle_level_irq);
-	irq_set_chip_data(irq, bank);
-	set_irq_flags(irq, IRQF_VALID);
-
-	return 0;
-}
-
-const struct irq_domain_ops sirfsoc_gpio_irq_simple_ops = {
-	.map = sirfsoc_gpio_irq_map,
-	.xlate = irq_domain_xlate_twocell,
-};
-
-static void sirfsoc_gpio_set_pullup(const u32 *pullups)
-{
-	int i, n;
-	const unsigned long *p = (const unsigned long *)pullups;
-
-	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
-		for_each_set_bit(n, p + i, BITS_PER_LONG) {
-			u32 offset = SIRFSOC_GPIO_CTRL(i, n);
-			u32 val = readl(sgpio_bank[i].chip.regs + offset);
-			val |= SIRFSOC_GPIO_CTL_PULL_MASK;
-			val |= SIRFSOC_GPIO_CTL_PULL_HIGH;
-			writel(val, sgpio_bank[i].chip.regs + offset);
-		}
-	}
-}
-
-static void sirfsoc_gpio_set_pulldown(const u32 *pulldowns)
-{
-	int i, n;
-	const unsigned long *p = (const unsigned long *)pulldowns;
-
-	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
-		for_each_set_bit(n, p + i, BITS_PER_LONG) {
-			u32 offset = SIRFSOC_GPIO_CTRL(i, n);
-			u32 val = readl(sgpio_bank[i].chip.regs + offset);
-			val |= SIRFSOC_GPIO_CTL_PULL_MASK;
-			val &= ~SIRFSOC_GPIO_CTL_PULL_HIGH;
-			writel(val, sgpio_bank[i].chip.regs + offset);
-		}
-	}
-}
-
-static int sirfsoc_gpio_probe(struct device_node *np)
-{
-	int i, err = 0;
-	struct sirfsoc_gpio_bank *bank;
-	void *regs;
-	struct platform_device *pdev;
-	bool is_marco = false;
-
-	u32 pullups[SIRFSOC_GPIO_NO_OF_BANKS], pulldowns[SIRFSOC_GPIO_NO_OF_BANKS];
-
-	pdev = of_find_device_by_node(np);
-	if (!pdev)
-		return -ENODEV;
-
-	regs = of_iomap(np, 0);
-	if (!regs)
-		return -ENOMEM;
-
-	if (of_device_is_compatible(np, "sirf,marco-pinctrl"))
-		is_marco = 1;
-
-	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
-		bank = &sgpio_bank[i];
-		spin_lock_init(&bank->lock);
-		bank->chip.gc.request = sirfsoc_gpio_request;
-		bank->chip.gc.free = sirfsoc_gpio_free;
-		bank->chip.gc.direction_input = sirfsoc_gpio_direction_input;
-		bank->chip.gc.get = sirfsoc_gpio_get_value;
-		bank->chip.gc.direction_output = sirfsoc_gpio_direction_output;
-		bank->chip.gc.set = sirfsoc_gpio_set_value;
-		bank->chip.gc.to_irq = sirfsoc_gpio_to_irq;
-		bank->chip.gc.base = i * SIRFSOC_GPIO_BANK_SIZE;
-		bank->chip.gc.ngpio = SIRFSOC_GPIO_BANK_SIZE;
-		bank->chip.gc.label = kstrdup(np->full_name, GFP_KERNEL);
-		bank->chip.gc.of_node = np;
-		bank->chip.gc.of_xlate = sirfsoc_gpio_of_xlate;
-		bank->chip.gc.of_gpio_n_cells = 2;
-		bank->chip.regs = regs;
-		bank->id = i;
-		bank->is_marco = is_marco;
-		bank->parent_irq = platform_get_irq(pdev, i);
-		if (bank->parent_irq < 0) {
-			err = bank->parent_irq;
-			goto out;
-		}
-
-		err = gpiochip_add(&bank->chip.gc);
-		if (err) {
-			pr_err("%s: error in probe function with status %d\n",
-				np->full_name, err);
-			goto out;
-		}
-
-		bank->domain = irq_domain_add_linear(np, SIRFSOC_GPIO_BANK_SIZE,
-						&sirfsoc_gpio_irq_simple_ops, bank);
-
-		if (!bank->domain) {
-			pr_err("%s: Failed to create irqdomain\n", np->full_name);
-			err = -ENOSYS;
-			goto out;
-		}
-
-		irq_set_chained_handler(bank->parent_irq, sirfsoc_gpio_handle_irq);
-		irq_set_handler_data(bank->parent_irq, bank);
-	}
-
-	if (!of_property_read_u32_array(np, "sirf,pullups", pullups,
-		SIRFSOC_GPIO_NO_OF_BANKS))
-		sirfsoc_gpio_set_pullup(pullups);
-
-	if (!of_property_read_u32_array(np, "sirf,pulldowns", pulldowns,
-		SIRFSOC_GPIO_NO_OF_BANKS))
-		sirfsoc_gpio_set_pulldown(pulldowns);
-
-	return 0;
-
-out:
-	iounmap(regs);
-	return err;
-}
-
-static int __init sirfsoc_gpio_init(void)
-{
-
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, pinmux_ids);
-
-	if (!np)
-		return -ENODEV;
-
-	return sirfsoc_gpio_probe(np);
-}
-subsys_initcall(sirfsoc_gpio_init);
-
-MODULE_AUTHOR("Rongjun Ying <rongjun.ying@csr.com>, "
-	"Yuping Luo <yuping.luo@csr.com>, "
-	"Barry Song <baohua.song@csr.com>");
-MODULE_DESCRIPTION("SIRFSOC pin control driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/sirf/pinctrl-sirf.c b/drivers/pinctrl/sirf/pinctrl-sirf.c
new file mode 100644
index 00000000000..0677e198db6
--- /dev/null
+++ b/drivers/pinctrl/sirf/pinctrl-sirf.c
@@ -0,0 +1,929 @@
+/*
+ * pinmux driver for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <asm/mach/irq.h>
+
+#include "pinctrl-sirf.h"
+
+#define DRIVER_NAME "pinmux-sirf"
+
+struct sirfsoc_gpio_bank {
+	struct of_mm_gpio_chip chip;
+	struct irq_domain *domain;
+	int id;
+	int parent_irq;
+	spinlock_t lock;
+	bool is_marco; /* for marco, some registers are different with prima2 */
+};
+
+static struct sirfsoc_gpio_bank sgpio_bank[SIRFSOC_GPIO_NO_OF_BANKS];
+static DEFINE_SPINLOCK(sgpio_lock);
+
+static struct sirfsoc_pin_group *sirfsoc_pin_groups;
+static int sirfsoc_pingrp_cnt;
+
+static int sirfsoc_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return sirfsoc_pingrp_cnt;
+}
+
+static const char *sirfsoc_get_group_name(struct pinctrl_dev *pctldev,
+				       unsigned selector)
+{
+	return sirfsoc_pin_groups[selector].name;
+}
+
+static int sirfsoc_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
+			       const unsigned **pins,
+			       unsigned *num_pins)
+{
+	*pins = sirfsoc_pin_groups[selector].pins;
+	*num_pins = sirfsoc_pin_groups[selector].num_pins;
+	return 0;
+}
+
+static void sirfsoc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+		   unsigned offset)
+{
+	seq_printf(s, " " DRIVER_NAME);
+}
+
+static int sirfsoc_dt_node_to_map(struct pinctrl_dev *pctldev,
+				 struct device_node *np_config,
+				 struct pinctrl_map **map, unsigned *num_maps)
+{
+	struct sirfsoc_pmx *spmx = pinctrl_dev_get_drvdata(pctldev);
+	struct device_node *np;
+	struct property *prop;
+	const char *function, *group;
+	int ret, index = 0, count = 0;
+
+	/* calculate number of maps required */
+	for_each_child_of_node(np_config, np) {
+		ret = of_property_read_string(np, "sirf,function", &function);
+		if (ret < 0)
+			return ret;
+
+		ret = of_property_count_strings(np, "sirf,pins");
+		if (ret < 0)
+			return ret;
+
+		count += ret;
+	}
+
+	if (!count) {
+		dev_err(spmx->dev, "No child nodes passed via DT\n");
+		return -ENODEV;
+	}
+
+	*map = kzalloc(sizeof(**map) * count, GFP_KERNEL);
+	if (!*map)
+		return -ENOMEM;
+
+	for_each_child_of_node(np_config, np) {
+		of_property_read_string(np, "sirf,function", &function);
+		of_property_for_each_string(np, "sirf,pins", prop, group) {
+			(*map)[index].type = PIN_MAP_TYPE_MUX_GROUP;
+			(*map)[index].data.mux.group = group;
+			(*map)[index].data.mux.function = function;
+			index++;
+		}
+	}
+
+	*num_maps = count;
+
+	return 0;
+}
+
+static void sirfsoc_dt_free_map(struct pinctrl_dev *pctldev,
+		struct pinctrl_map *map, unsigned num_maps)
+{
+	kfree(map);
+}
+
+static struct pinctrl_ops sirfsoc_pctrl_ops = {
+	.get_groups_count = sirfsoc_get_groups_count,
+	.get_group_name = sirfsoc_get_group_name,
+	.get_group_pins = sirfsoc_get_group_pins,
+	.pin_dbg_show = sirfsoc_pin_dbg_show,
+	.dt_node_to_map = sirfsoc_dt_node_to_map,
+	.dt_free_map = sirfsoc_dt_free_map,
+};
+
+static struct sirfsoc_pmx_func *sirfsoc_pmx_functions;
+static int sirfsoc_pmxfunc_cnt;
+
+static void sirfsoc_pinmux_endisable(struct sirfsoc_pmx *spmx, unsigned selector,
+	bool enable)
+{
+	int i;
+	const struct sirfsoc_padmux *mux = sirfsoc_pmx_functions[selector].padmux;
+	const struct sirfsoc_muxmask *mask = mux->muxmask;
+
+	for (i = 0; i < mux->muxmask_counts; i++) {
+		u32 muxval;
+		if (!spmx->is_marco) {
+			muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group));
+			if (enable)
+				muxval = muxval & ~mask[i].mask;
+			else
+				muxval = muxval | mask[i].mask;
+			writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(mask[i].group));
+		} else {
+			if (enable)
+				writel(mask[i].mask, spmx->gpio_virtbase +
+					SIRFSOC_GPIO_PAD_EN_CLR(mask[i].group));
+			else
+				writel(mask[i].mask, spmx->gpio_virtbase +
+					SIRFSOC_GPIO_PAD_EN(mask[i].group));
+		}
+	}
+
+	if (mux->funcmask && enable) {
+		u32 func_en_val;
+		func_en_val =
+			readl(spmx->rsc_virtbase + SIRFSOC_RSC_PIN_MUX);
+		func_en_val =
+			(func_en_val & ~mux->funcmask) | (mux->
+				funcval);
+		writel(func_en_val, spmx->rsc_virtbase + SIRFSOC_RSC_PIN_MUX);
+	}
+}
+
+static int sirfsoc_pinmux_enable(struct pinctrl_dev *pmxdev, unsigned selector,
+	unsigned group)
+{
+	struct sirfsoc_pmx *spmx;
+
+	spmx = pinctrl_dev_get_drvdata(pmxdev);
+	sirfsoc_pinmux_endisable(spmx, selector, true);
+
+	return 0;
+}
+
+static void sirfsoc_pinmux_disable(struct pinctrl_dev *pmxdev, unsigned selector,
+	unsigned group)
+{
+	struct sirfsoc_pmx *spmx;
+
+	spmx = pinctrl_dev_get_drvdata(pmxdev);
+	sirfsoc_pinmux_endisable(spmx, selector, false);
+}
+
+static int sirfsoc_pinmux_get_funcs_count(struct pinctrl_dev *pmxdev)
+{
+	return sirfsoc_pmxfunc_cnt;
+}
+
+static const char *sirfsoc_pinmux_get_func_name(struct pinctrl_dev *pctldev,
+					  unsigned selector)
+{
+	return sirfsoc_pmx_functions[selector].name;
+}
+
+static int sirfsoc_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
+			       const char * const **groups,
+			       unsigned * const num_groups)
+{
+	*groups = sirfsoc_pmx_functions[selector].groups;
+	*num_groups = sirfsoc_pmx_functions[selector].num_groups;
+	return 0;
+}
+
+static int sirfsoc_pinmux_request_gpio(struct pinctrl_dev *pmxdev,
+	struct pinctrl_gpio_range *range, unsigned offset)
+{
+	struct sirfsoc_pmx *spmx;
+
+	int group = range->id;
+
+	u32 muxval;
+
+	spmx = pinctrl_dev_get_drvdata(pmxdev);
+
+	if (!spmx->is_marco) {
+		muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
+		muxval = muxval | (1 << (offset - range->pin_base));
+		writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
+	} else {
+		writel(1 << (offset - range->pin_base), spmx->gpio_virtbase +
+			SIRFSOC_GPIO_PAD_EN(group));
+	}
+
+	return 0;
+}
+
+static struct pinmux_ops sirfsoc_pinmux_ops = {
+	.enable = sirfsoc_pinmux_enable,
+	.disable = sirfsoc_pinmux_disable,
+	.get_functions_count = sirfsoc_pinmux_get_funcs_count,
+	.get_function_name = sirfsoc_pinmux_get_func_name,
+	.get_function_groups = sirfsoc_pinmux_get_groups,
+	.gpio_request_enable = sirfsoc_pinmux_request_gpio,
+};
+
+static struct pinctrl_desc sirfsoc_pinmux_desc = {
+	.name = DRIVER_NAME,
+	.pctlops = &sirfsoc_pctrl_ops,
+	.pmxops = &sirfsoc_pinmux_ops,
+	.owner = THIS_MODULE,
+};
+
+/*
+ * Todo: bind irq_chip to every pinctrl_gpio_range
+ */
+static struct pinctrl_gpio_range sirfsoc_gpio_ranges[] = {
+	{
+		.name = "sirfsoc-gpio*",
+		.id = 0,
+		.base = 0,
+		.pin_base = 0,
+		.npins = 32,
+	}, {
+		.name = "sirfsoc-gpio*",
+		.id = 1,
+		.base = 32,
+		.pin_base = 32,
+		.npins = 32,
+	}, {
+		.name = "sirfsoc-gpio*",
+		.id = 2,
+		.base = 64,
+		.pin_base = 64,
+		.npins = 32,
+	}, {
+		.name = "sirfsoc-gpio*",
+		.id = 3,
+		.base = 96,
+		.pin_base = 96,
+		.npins = 19,
+	},
+};
+
+static void __iomem *sirfsoc_rsc_of_iomap(void)
+{
+	const struct of_device_id rsc_ids[]  = {
+		{ .compatible = "sirf,prima2-rsc" },
+		{ .compatible = "sirf,marco-rsc" },
+		{}
+	};
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, rsc_ids);
+	if (!np)
+		panic("unable to find compatible rsc node in dtb\n");
+
+	return of_iomap(np, 0);
+}
+
+static int sirfsoc_gpio_of_xlate(struct gpio_chip *gc,
+       const struct of_phandle_args *gpiospec,
+       u32 *flags)
+{
+       if (gpiospec->args[0] > SIRFSOC_GPIO_NO_OF_BANKS * SIRFSOC_GPIO_BANK_SIZE)
+               return -EINVAL;
+
+       if (gc != &sgpio_bank[gpiospec->args[0] / SIRFSOC_GPIO_BANK_SIZE].chip.gc)
+               return -EINVAL;
+
+       if (flags)
+               *flags = gpiospec->args[1];
+
+       return gpiospec->args[0] % SIRFSOC_GPIO_BANK_SIZE;
+}
+
+static const struct of_device_id pinmux_ids[] = {
+	{ .compatible = "sirf,prima2-pinctrl", .data = &prima2_pinctrl_data, },
+	{ .compatible = "sirf,atlas6-pinctrl", .data = &atlas6_pinctrl_data, },
+	{ .compatible = "sirf,marco-pinctrl", .data = &prima2_pinctrl_data, },
+	{}
+};
+
+static int sirfsoc_pinmux_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct sirfsoc_pmx *spmx;
+	struct device_node *np = pdev->dev.of_node;
+	const struct sirfsoc_pinctrl_data *pdata;
+	int i;
+
+	/* Create state holders etc for this driver */
+	spmx = devm_kzalloc(&pdev->dev, sizeof(*spmx), GFP_KERNEL);
+	if (!spmx)
+		return -ENOMEM;
+
+	spmx->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, spmx);
+
+	spmx->gpio_virtbase = of_iomap(np, 0);
+	if (!spmx->gpio_virtbase) {
+		dev_err(&pdev->dev, "can't map gpio registers\n");
+		return -ENOMEM;
+	}
+
+	spmx->rsc_virtbase = sirfsoc_rsc_of_iomap();
+	if (!spmx->rsc_virtbase) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "can't map rsc registers\n");
+		goto out_no_rsc_remap;
+	}
+
+	if (of_device_is_compatible(np, "sirf,marco-pinctrl"))
+		spmx->is_marco = 1;
+
+	pdata = of_match_node(pinmux_ids, np)->data;
+	sirfsoc_pin_groups = pdata->grps;
+	sirfsoc_pingrp_cnt = pdata->grps_cnt;
+	sirfsoc_pmx_functions = pdata->funcs;
+	sirfsoc_pmxfunc_cnt = pdata->funcs_cnt;
+	sirfsoc_pinmux_desc.pins = pdata->pads;
+	sirfsoc_pinmux_desc.npins = pdata->pads_cnt;
+
+
+	/* Now register the pin controller and all pins it handles */
+	spmx->pmx = pinctrl_register(&sirfsoc_pinmux_desc, &pdev->dev, spmx);
+	if (!spmx->pmx) {
+		dev_err(&pdev->dev, "could not register SIRFSOC pinmux driver\n");
+		ret = -EINVAL;
+		goto out_no_pmx;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sirfsoc_gpio_ranges); i++) {
+		sirfsoc_gpio_ranges[i].gc = &sgpio_bank[i].chip.gc;
+		pinctrl_add_gpio_range(spmx->pmx, &sirfsoc_gpio_ranges[i]);
+	}
+
+	dev_info(&pdev->dev, "initialized SIRFSOC pinmux driver\n");
+
+	return 0;
+
+out_no_pmx:
+	iounmap(spmx->rsc_virtbase);
+out_no_rsc_remap:
+	iounmap(spmx->gpio_virtbase);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sirfsoc_pinmux_suspend_noirq(struct device *dev)
+{
+	int i, j;
+	struct sirfsoc_pmx *spmx = dev_get_drvdata(dev);
+
+	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
+		for (j = 0; j < SIRFSOC_GPIO_BANK_SIZE; j++) {
+			spmx->gpio_regs[i][j] = readl(spmx->gpio_virtbase +
+				SIRFSOC_GPIO_CTRL(i, j));
+		}
+		spmx->ints_regs[i] = readl(spmx->gpio_virtbase +
+			SIRFSOC_GPIO_INT_STATUS(i));
+		spmx->paden_regs[i] = readl(spmx->gpio_virtbase +
+			SIRFSOC_GPIO_PAD_EN(i));
+	}
+	spmx->dspen_regs = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_DSP_EN0);
+
+	for (i = 0; i < 3; i++)
+		spmx->rsc_regs[i] = readl(spmx->rsc_virtbase + 4 * i);
+
+	return 0;
+}
+
+static int sirfsoc_pinmux_resume_noirq(struct device *dev)
+{
+	int i, j;
+	struct sirfsoc_pmx *spmx = dev_get_drvdata(dev);
+
+	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
+		for (j = 0; j < SIRFSOC_GPIO_BANK_SIZE; j++) {
+			writel(spmx->gpio_regs[i][j], spmx->gpio_virtbase +
+				SIRFSOC_GPIO_CTRL(i, j));
+		}
+		writel(spmx->ints_regs[i], spmx->gpio_virtbase +
+			SIRFSOC_GPIO_INT_STATUS(i));
+		writel(spmx->paden_regs[i], spmx->gpio_virtbase +
+			SIRFSOC_GPIO_PAD_EN(i));
+	}
+	writel(spmx->dspen_regs, spmx->gpio_virtbase + SIRFSOC_GPIO_DSP_EN0);
+
+	for (i = 0; i < 3; i++)
+		writel(spmx->rsc_regs[i], spmx->rsc_virtbase + 4 * i);
+
+	return 0;
+}
+
+static const struct dev_pm_ops sirfsoc_pinmux_pm_ops = {
+	.suspend_noirq = sirfsoc_pinmux_suspend_noirq,
+	.resume_noirq = sirfsoc_pinmux_resume_noirq,
+};
+#endif
+
+static struct platform_driver sirfsoc_pinmux_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = pinmux_ids,
+#ifdef CONFIG_PM_SLEEP
+		.pm = &sirfsoc_pinmux_pm_ops,
+#endif
+	},
+	.probe = sirfsoc_pinmux_probe,
+};
+
+static int __init sirfsoc_pinmux_init(void)
+{
+	return platform_driver_register(&sirfsoc_pinmux_driver);
+}
+arch_initcall(sirfsoc_pinmux_init);
+
+static inline int sirfsoc_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct sirfsoc_gpio_bank *bank = container_of(to_of_mm_gpio_chip(chip),
+		struct sirfsoc_gpio_bank, chip);
+
+	return irq_create_mapping(bank->domain, offset);
+}
+
+static inline int sirfsoc_gpio_to_offset(unsigned int gpio)
+{
+	return gpio % SIRFSOC_GPIO_BANK_SIZE;
+}
+
+static inline struct sirfsoc_gpio_bank *sirfsoc_gpio_to_bank(unsigned int gpio)
+{
+	return &sgpio_bank[gpio / SIRFSOC_GPIO_BANK_SIZE];
+}
+
+static inline struct sirfsoc_gpio_bank *sirfsoc_irqchip_to_bank(struct gpio_chip *chip)
+{
+	return container_of(to_of_mm_gpio_chip(chip), struct sirfsoc_gpio_bank, chip);
+}
+
+static void sirfsoc_gpio_irq_ack(struct irq_data *d)
+{
+	struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
+	u32 val, offset;
+	unsigned long flags;
+
+	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+	spin_lock_irqsave(&sgpio_lock, flags);
+
+	val = readl(bank->chip.regs + offset);
+
+	writel(val, bank->chip.regs + offset);
+
+	spin_unlock_irqrestore(&sgpio_lock, flags);
+}
+
+static void __sirfsoc_gpio_irq_mask(struct sirfsoc_gpio_bank *bank, int idx)
+{
+	u32 val, offset;
+	unsigned long flags;
+
+	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+	spin_lock_irqsave(&sgpio_lock, flags);
+
+	val = readl(bank->chip.regs + offset);
+	val &= ~SIRFSOC_GPIO_CTL_INTR_EN_MASK;
+	val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
+	writel(val, bank->chip.regs + offset);
+
+	spin_unlock_irqrestore(&sgpio_lock, flags);
+}
+
+static void sirfsoc_gpio_irq_mask(struct irq_data *d)
+{
+	struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+
+	__sirfsoc_gpio_irq_mask(bank, d->hwirq % SIRFSOC_GPIO_BANK_SIZE);
+}
+
+static void sirfsoc_gpio_irq_unmask(struct irq_data *d)
+{
+	struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
+	u32 val, offset;
+	unsigned long flags;
+
+	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+	spin_lock_irqsave(&sgpio_lock, flags);
+
+	val = readl(bank->chip.regs + offset);
+	val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
+	val |= SIRFSOC_GPIO_CTL_INTR_EN_MASK;
+	writel(val, bank->chip.regs + offset);
+
+	spin_unlock_irqrestore(&sgpio_lock, flags);
+}
+
+static int sirfsoc_gpio_irq_type(struct irq_data *d, unsigned type)
+{
+	struct sirfsoc_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+	int idx = d->hwirq % SIRFSOC_GPIO_BANK_SIZE;
+	u32 val, offset;
+	unsigned long flags;
+
+	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+	spin_lock_irqsave(&sgpio_lock, flags);
+
+	val = readl(bank->chip.regs + offset);
+	val &= ~SIRFSOC_GPIO_CTL_INTR_STS_MASK;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
+		val &= ~SIRFSOC_GPIO_CTL_INTR_LOW_MASK;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		val &= ~SIRFSOC_GPIO_CTL_INTR_HIGH_MASK;
+		val |= SIRFSOC_GPIO_CTL_INTR_LOW_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_LOW_MASK |
+			 SIRFSOC_GPIO_CTL_INTR_TYPE_MASK;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		val &= ~(SIRFSOC_GPIO_CTL_INTR_HIGH_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK);
+		val |= SIRFSOC_GPIO_CTL_INTR_LOW_MASK;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		val |= SIRFSOC_GPIO_CTL_INTR_HIGH_MASK;
+		val &= ~(SIRFSOC_GPIO_CTL_INTR_LOW_MASK | SIRFSOC_GPIO_CTL_INTR_TYPE_MASK);
+		break;
+	}
+
+	writel(val, bank->chip.regs + offset);
+
+	spin_unlock_irqrestore(&sgpio_lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip sirfsoc_irq_chip = {
+	.name = "sirf-gpio-irq",
+	.irq_ack = sirfsoc_gpio_irq_ack,
+	.irq_mask = sirfsoc_gpio_irq_mask,
+	.irq_unmask = sirfsoc_gpio_irq_unmask,
+	.irq_set_type = sirfsoc_gpio_irq_type,
+};
+
+static void sirfsoc_gpio_handle_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct sirfsoc_gpio_bank *bank = irq_get_handler_data(irq);
+	u32 status, ctrl;
+	int idx = 0;
+	struct irq_chip *chip = irq_get_chip(irq);
+
+	chained_irq_enter(chip, desc);
+
+	status = readl(bank->chip.regs + SIRFSOC_GPIO_INT_STATUS(bank->id));
+	if (!status) {
+		printk(KERN_WARNING
+			"%s: gpio id %d status %#x no interrupt is flaged\n",
+			__func__, bank->id, status);
+		handle_bad_irq(irq, desc);
+		return;
+	}
+
+	while (status) {
+		ctrl = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, idx));
+
+		/*
+		 * Here we must check whether the corresponding GPIO's interrupt
+		 * has been enabled, otherwise just skip it
+		 */
+		if ((status & 0x1) && (ctrl & SIRFSOC_GPIO_CTL_INTR_EN_MASK)) {
+			pr_debug("%s: gpio id %d idx %d happens\n",
+				__func__, bank->id, idx);
+			generic_handle_irq(irq_find_mapping(bank->domain, idx));
+		}
+
+		idx++;
+		status = status >> 1;
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static inline void sirfsoc_gpio_set_input(struct sirfsoc_gpio_bank *bank, unsigned ctrl_offset)
+{
+	u32 val;
+
+	val = readl(bank->chip.regs + ctrl_offset);
+	val &= ~SIRFSOC_GPIO_CTL_OUT_EN_MASK;
+	writel(val, bank->chip.regs + ctrl_offset);
+}
+
+static int sirfsoc_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+	unsigned long flags;
+
+	if (pinctrl_request_gpio(chip->base + offset))
+		return -ENODEV;
+
+	spin_lock_irqsave(&bank->lock, flags);
+
+	/*
+	 * default status:
+	 * set direction as input and mask irq
+	 */
+	sirfsoc_gpio_set_input(bank, SIRFSOC_GPIO_CTRL(bank->id, offset));
+	__sirfsoc_gpio_irq_mask(bank, offset);
+
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static void sirfsoc_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+
+	__sirfsoc_gpio_irq_mask(bank, offset);
+	sirfsoc_gpio_set_input(bank, SIRFSOC_GPIO_CTRL(bank->id, offset));
+
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	pinctrl_free_gpio(chip->base + offset);
+}
+
+static int sirfsoc_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+	int idx = sirfsoc_gpio_to_offset(gpio);
+	unsigned long flags;
+	unsigned offset;
+
+	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+	spin_lock_irqsave(&bank->lock, flags);
+
+	sirfsoc_gpio_set_input(bank, offset);
+
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
+static inline void sirfsoc_gpio_set_output(struct sirfsoc_gpio_bank *bank, unsigned offset,
+	int value)
+{
+	u32 out_ctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+
+	out_ctrl = readl(bank->chip.regs + offset);
+	if (value)
+		out_ctrl |= SIRFSOC_GPIO_CTL_DATAOUT_MASK;
+	else
+		out_ctrl &= ~SIRFSOC_GPIO_CTL_DATAOUT_MASK;
+
+	out_ctrl &= ~SIRFSOC_GPIO_CTL_INTR_EN_MASK;
+	out_ctrl |= SIRFSOC_GPIO_CTL_OUT_EN_MASK;
+	writel(out_ctrl, bank->chip.regs + offset);
+
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static int sirfsoc_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+	int idx = sirfsoc_gpio_to_offset(gpio);
+	u32 offset;
+	unsigned long flags;
+
+	offset = SIRFSOC_GPIO_CTRL(bank->id, idx);
+
+	spin_lock_irqsave(&sgpio_lock, flags);
+
+	sirfsoc_gpio_set_output(bank, offset, value);
+
+	spin_unlock_irqrestore(&sgpio_lock, flags);
+
+	return 0;
+}
+
+static int sirfsoc_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+
+	val = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
+
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return !!(val & SIRFSOC_GPIO_CTL_DATAIN_MASK);
+}
+
+static void sirfsoc_gpio_set_value(struct gpio_chip *chip, unsigned offset,
+	int value)
+{
+	struct sirfsoc_gpio_bank *bank = sirfsoc_irqchip_to_bank(chip);
+	u32 ctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bank->lock, flags);
+
+	ctrl = readl(bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
+	if (value)
+		ctrl |= SIRFSOC_GPIO_CTL_DATAOUT_MASK;
+	else
+		ctrl &= ~SIRFSOC_GPIO_CTL_DATAOUT_MASK;
+	writel(ctrl, bank->chip.regs + SIRFSOC_GPIO_CTRL(bank->id, offset));
+
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static int sirfsoc_gpio_irq_map(struct irq_domain *d, unsigned int irq,
+				irq_hw_number_t hwirq)
+{
+	struct sirfsoc_gpio_bank *bank = d->host_data;
+
+	if (!bank)
+		return -EINVAL;
+
+	irq_set_chip(irq, &sirfsoc_irq_chip);
+	irq_set_handler(irq, handle_level_irq);
+	irq_set_chip_data(irq, bank);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+static const struct irq_domain_ops sirfsoc_gpio_irq_simple_ops = {
+	.map = sirfsoc_gpio_irq_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static void sirfsoc_gpio_set_pullup(const u32 *pullups)
+{
+	int i, n;
+	const unsigned long *p = (const unsigned long *)pullups;
+
+	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
+		for_each_set_bit(n, p + i, BITS_PER_LONG) {
+			u32 offset = SIRFSOC_GPIO_CTRL(i, n);
+			u32 val = readl(sgpio_bank[i].chip.regs + offset);
+			val |= SIRFSOC_GPIO_CTL_PULL_MASK;
+			val |= SIRFSOC_GPIO_CTL_PULL_HIGH;
+			writel(val, sgpio_bank[i].chip.regs + offset);
+		}
+	}
+}
+
+static void sirfsoc_gpio_set_pulldown(const u32 *pulldowns)
+{
+	int i, n;
+	const unsigned long *p = (const unsigned long *)pulldowns;
+
+	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
+		for_each_set_bit(n, p + i, BITS_PER_LONG) {
+			u32 offset = SIRFSOC_GPIO_CTRL(i, n);
+			u32 val = readl(sgpio_bank[i].chip.regs + offset);
+			val |= SIRFSOC_GPIO_CTL_PULL_MASK;
+			val &= ~SIRFSOC_GPIO_CTL_PULL_HIGH;
+			writel(val, sgpio_bank[i].chip.regs + offset);
+		}
+	}
+}
+
+static int sirfsoc_gpio_probe(struct device_node *np)
+{
+	int i, err = 0;
+	struct sirfsoc_gpio_bank *bank;
+	void *regs;
+	struct platform_device *pdev;
+	bool is_marco = false;
+
+	u32 pullups[SIRFSOC_GPIO_NO_OF_BANKS], pulldowns[SIRFSOC_GPIO_NO_OF_BANKS];
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev)
+		return -ENODEV;
+
+	regs = of_iomap(np, 0);
+	if (!regs)
+		return -ENOMEM;
+
+	if (of_device_is_compatible(np, "sirf,marco-pinctrl"))
+		is_marco = 1;
+
+	for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
+		bank = &sgpio_bank[i];
+		spin_lock_init(&bank->lock);
+		bank->chip.gc.request = sirfsoc_gpio_request;
+		bank->chip.gc.free = sirfsoc_gpio_free;
+		bank->chip.gc.direction_input = sirfsoc_gpio_direction_input;
+		bank->chip.gc.get = sirfsoc_gpio_get_value;
+		bank->chip.gc.direction_output = sirfsoc_gpio_direction_output;
+		bank->chip.gc.set = sirfsoc_gpio_set_value;
+		bank->chip.gc.to_irq = sirfsoc_gpio_to_irq;
+		bank->chip.gc.base = i * SIRFSOC_GPIO_BANK_SIZE;
+		bank->chip.gc.ngpio = SIRFSOC_GPIO_BANK_SIZE;
+		bank->chip.gc.label = kstrdup(np->full_name, GFP_KERNEL);
+		bank->chip.gc.of_node = np;
+		bank->chip.gc.of_xlate = sirfsoc_gpio_of_xlate;
+		bank->chip.gc.of_gpio_n_cells = 2;
+		bank->chip.regs = regs;
+		bank->id = i;
+		bank->is_marco = is_marco;
+		bank->parent_irq = platform_get_irq(pdev, i);
+		if (bank->parent_irq < 0) {
+			err = bank->parent_irq;
+			goto out;
+		}
+
+		err = gpiochip_add(&bank->chip.gc);
+		if (err) {
+			pr_err("%s: error in probe function with status %d\n",
+				np->full_name, err);
+			goto out;
+		}
+
+		bank->domain = irq_domain_add_linear(np, SIRFSOC_GPIO_BANK_SIZE,
+						&sirfsoc_gpio_irq_simple_ops, bank);
+
+		if (!bank->domain) {
+			pr_err("%s: Failed to create irqdomain\n", np->full_name);
+			err = -ENOSYS;
+			goto out;
+		}
+
+		irq_set_chained_handler(bank->parent_irq, sirfsoc_gpio_handle_irq);
+		irq_set_handler_data(bank->parent_irq, bank);
+	}
+
+	if (!of_property_read_u32_array(np, "sirf,pullups", pullups,
+		SIRFSOC_GPIO_NO_OF_BANKS))
+		sirfsoc_gpio_set_pullup(pullups);
+
+	if (!of_property_read_u32_array(np, "sirf,pulldowns", pulldowns,
+		SIRFSOC_GPIO_NO_OF_BANKS))
+		sirfsoc_gpio_set_pulldown(pulldowns);
+
+	return 0;
+
+out:
+	iounmap(regs);
+	return err;
+}
+
+static int __init sirfsoc_gpio_init(void)
+{
+
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, pinmux_ids);
+
+	if (!np)
+		return -ENODEV;
+
+	return sirfsoc_gpio_probe(np);
+}
+subsys_initcall(sirfsoc_gpio_init);
+
+MODULE_AUTHOR("Rongjun Ying <rongjun.ying@csr.com>, "
+	"Yuping Luo <yuping.luo@csr.com>, "
+	"Barry Song <baohua.song@csr.com>");
+MODULE_DESCRIPTION("SIRFSOC pin control driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/sirf/pinctrl-sirf.h b/drivers/pinctrl/sirf/pinctrl-sirf.h
new file mode 100644
index 00000000000..17cc108510b
--- /dev/null
+++ b/drivers/pinctrl/sirf/pinctrl-sirf.h
@@ -0,0 +1,116 @@
+/*
+ * pinmux driver shared headfile for CSR SiRFsoc
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef __PINMUX_SIRF_H__
+#define __PINMUX_SIRF_H__
+
+#define SIRFSOC_NUM_PADS    622
+#define SIRFSOC_RSC_PIN_MUX 0x4
+
+#define SIRFSOC_GPIO_PAD_EN(g)		((g)*0x100 + 0x84)
+#define SIRFSOC_GPIO_PAD_EN_CLR(g)	((g)*0x100 + 0x90)
+#define SIRFSOC_GPIO_CTRL(g, i)			((g)*0x100 + (i)*4)
+#define SIRFSOC_GPIO_DSP_EN0			(0x80)
+#define SIRFSOC_GPIO_INT_STATUS(g)		((g)*0x100 + 0x8C)
+
+#define SIRFSOC_GPIO_CTL_INTR_LOW_MASK		0x1
+#define SIRFSOC_GPIO_CTL_INTR_HIGH_MASK		0x2
+#define SIRFSOC_GPIO_CTL_INTR_TYPE_MASK		0x4
+#define SIRFSOC_GPIO_CTL_INTR_EN_MASK		0x8
+#define SIRFSOC_GPIO_CTL_INTR_STS_MASK		0x10
+#define SIRFSOC_GPIO_CTL_OUT_EN_MASK		0x20
+#define SIRFSOC_GPIO_CTL_DATAOUT_MASK		0x40
+#define SIRFSOC_GPIO_CTL_DATAIN_MASK		0x80
+#define SIRFSOC_GPIO_CTL_PULL_MASK		0x100
+#define SIRFSOC_GPIO_CTL_PULL_HIGH		0x200
+#define SIRFSOC_GPIO_CTL_DSP_INT		0x400
+
+#define SIRFSOC_GPIO_NO_OF_BANKS        5
+#define SIRFSOC_GPIO_BANK_SIZE          32
+#define SIRFSOC_GPIO_NUM(bank, index)	(((bank)*(32)) + (index))
+
+/**
+ * @dev: a pointer back to containing device
+ * @virtbase: the offset to the controller in virtual memory
+ */
+struct sirfsoc_pmx {
+	struct device *dev;
+	struct pinctrl_dev *pmx;
+	void __iomem *gpio_virtbase;
+	void __iomem *rsc_virtbase;
+	u32 gpio_regs[SIRFSOC_GPIO_NO_OF_BANKS][SIRFSOC_GPIO_BANK_SIZE];
+	u32 ints_regs[SIRFSOC_GPIO_NO_OF_BANKS];
+	u32 paden_regs[SIRFSOC_GPIO_NO_OF_BANKS];
+	u32 dspen_regs;
+	u32 rsc_regs[3];
+	bool is_marco;
+};
+
+/* SIRFSOC_GPIO_PAD_EN set */
+struct sirfsoc_muxmask {
+	unsigned long group;
+	unsigned long mask;
+};
+
+struct sirfsoc_padmux {
+	unsigned long muxmask_counts;
+	const struct sirfsoc_muxmask *muxmask;
+	/* RSC_PIN_MUX set */
+	unsigned long funcmask;
+	unsigned long funcval;
+};
+
+ /**
+ * struct sirfsoc_pin_group - describes a SiRFprimaII pin group
+ * @name: the name of this specific pin group
+ * @pins: an array of discrete physical pins used in this group, taken
+ *	from the driver-local pin enumeration space
+ * @num_pins: the number of pins in this group array, i.e. the number of
+ *	elements in .pins so we can iterate over that array
+ */
+struct sirfsoc_pin_group {
+	const char *name;
+	const unsigned int *pins;
+	const unsigned num_pins;
+};
+
+#define SIRFSOC_PIN_GROUP(n, p)  \
+	{			\
+		.name = n,	\
+		.pins = p,	\
+		.num_pins = ARRAY_SIZE(p),	\
+	}
+
+struct sirfsoc_pmx_func {
+	const char *name;
+	const char * const *groups;
+	const unsigned num_groups;
+	const struct sirfsoc_padmux *padmux;
+};
+
+#define SIRFSOC_PMX_FUNCTION(n, g, m)		\
+	{					\
+		.name = n,			\
+		.groups = g,			\
+		.num_groups = ARRAY_SIZE(g),	\
+		.padmux = &m,			\
+	}
+
+struct sirfsoc_pinctrl_data {
+	struct pinctrl_pin_desc *pads;
+	int pads_cnt;
+	struct sirfsoc_pin_group *grps;
+	int grps_cnt;
+	struct sirfsoc_pmx_func *funcs;
+	int funcs_cnt;
+};
+
+extern struct sirfsoc_pinctrl_data prima2_pinctrl_data;
+extern struct sirfsoc_pinctrl_data atlas6_pinctrl_data;
+
+#endif
diff --git a/drivers/pinctrl/spear/pinctrl-plgpio.c b/drivers/pinctrl/spear/pinctrl-plgpio.c
index 3e5a887216b..0a7f0bdbaa7 100644
--- a/drivers/pinctrl/spear/pinctrl-plgpio.c
+++ b/drivers/pinctrl/spear/pinctrl-plgpio.c
@@ -441,7 +441,7 @@ static int spear310_p2o(int pin)
 	return offset;
 }
 
-int spear310_o2p(int offset)
+static int spear310_o2p(int offset)
 {
 	if (offset <= 3)
 		return 101 - offset;
@@ -528,18 +528,13 @@ static int plgpio_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret, irq, i;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "invalid IORESOURCE_MEM\n");
-		return -EBUSY;
-	}
-
 	plgpio = devm_kzalloc(&pdev->dev, sizeof(*plgpio), GFP_KERNEL);
 	if (!plgpio) {
 		dev_err(&pdev->dev, "memory allocation fail\n");
 		return -ENOMEM;
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	plgpio->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(plgpio->base))
 		return PTR_ERR(plgpio->base);
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
index 70d986e04af..0cc4335bc0f 100644
--- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
@@ -569,11 +569,9 @@ int wmt_pinctrl_probe(struct platform_device *pdev,
 	struct resource *res;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->base = devm_request_and_ioremap(&pdev->dev, res);
-	if (!data->base) {
-		dev_err(&pdev->dev, "failed to map memory resource\n");
-		return -EBUSY;
-	}
+	data->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->base))
+		return PTR_ERR(data->base);
 
 	wmt_desc.pins = data->pins;
 	wmt_desc.npins = data->npins;
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 3b246543282..abef061fb84 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -368,11 +368,6 @@ struct pl022 {
 	resource_size_t			phybase;
 	void __iomem			*virtbase;
 	struct clk			*clk;
-	/* Two optional pin states - default & sleep */
-	struct pinctrl			*pinctrl;
-	struct pinctrl_state		*pins_default;
-	struct pinctrl_state		*pins_idle;
-	struct pinctrl_state		*pins_sleep;
 	struct spi_master		*master;
 	struct pl022_ssp_controller	*master_info;
 	/* Message per-transfer pump */
@@ -2134,32 +2129,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	pl022->chipselects = devm_kzalloc(dev, num_cs * sizeof(int),
 					  GFP_KERNEL);
 
-	pl022->pinctrl = devm_pinctrl_get(dev);
-	if (IS_ERR(pl022->pinctrl)) {
-		status = PTR_ERR(pl022->pinctrl);
-		goto err_no_pinctrl;
-	}
-
-	pl022->pins_default = pinctrl_lookup_state(pl022->pinctrl,
-						 PINCTRL_STATE_DEFAULT);
-	/* enable pins to be muxed in and configured */
-	if (!IS_ERR(pl022->pins_default)) {
-		status = pinctrl_select_state(pl022->pinctrl,
-				pl022->pins_default);
-		if (status)
-			dev_err(dev, "could not set default pins\n");
-	} else
-		dev_err(dev, "could not get default pinstate\n");
-
-	pl022->pins_idle = pinctrl_lookup_state(pl022->pinctrl,
-					      PINCTRL_STATE_IDLE);
-	if (IS_ERR(pl022->pins_idle))
-		dev_dbg(dev, "could not get idle pinstate\n");
-
-	pl022->pins_sleep = pinctrl_lookup_state(pl022->pinctrl,
-					       PINCTRL_STATE_SLEEP);
-	if (IS_ERR(pl022->pins_sleep))
-		dev_dbg(dev, "could not get sleep pinstate\n");
+	pinctrl_pm_select_default_state(dev);
 
 	/*
 	 * Bus Number Which has been Assigned to this SSP controller
@@ -2309,7 +2279,6 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	amba_release_regions(adev);
  err_no_ioregion:
  err_no_gpio:
- err_no_pinctrl:
 	spi_master_put(master);
 	return status;
 }
@@ -2349,44 +2318,21 @@ pl022_remove(struct amba_device *adev)
  */
 static void pl022_suspend_resources(struct pl022 *pl022, bool runtime)
 {
-	int ret;
-	struct pinctrl_state *pins_state;
-
 	clk_disable(pl022->clk);
 
-	pins_state = runtime ? pl022->pins_idle : pl022->pins_sleep;
-	/* Optionally let pins go into sleep states */
-	if (!IS_ERR(pins_state)) {
-		ret = pinctrl_select_state(pl022->pinctrl, pins_state);
-		if (ret)
-			dev_err(&pl022->adev->dev, "could not set %s pins\n",
-				runtime ? "idle" : "sleep");
-	}
+	if (runtime)
+		pinctrl_pm_select_idle_state(&pl022->adev->dev);
+	else
+		pinctrl_pm_select_sleep_state(&pl022->adev->dev);
 }
 
 static void pl022_resume_resources(struct pl022 *pl022, bool runtime)
 {
-	int ret;
-
-	/* Optionaly enable pins to be muxed in and configured */
 	/* First go to the default state */
-	if (!IS_ERR(pl022->pins_default)) {
-		ret = pinctrl_select_state(pl022->pinctrl, pl022->pins_default);
-		if (ret)
-			dev_err(&pl022->adev->dev,
-				"could not set default pins\n");
-	}
-
-	if (!runtime) {
+	pinctrl_pm_select_default_state(&pl022->adev->dev);
+	if (!runtime)
 		/* Then let's idle the pins until the next transfer happens */
-		if (!IS_ERR(pl022->pins_idle)) {
-			ret = pinctrl_select_state(pl022->pinctrl,
-					pl022->pins_idle);
-		if (ret)
-			dev_err(&pl022->adev->dev,
-				"could not set idle pins\n");
-		}
-	}
+		pinctrl_pm_select_idle_state(&pl022->adev->dev);
 
 	clk_enable(pl022->clk);
 }
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index ad41319d1d9..28b35ad9c6c 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -150,10 +150,6 @@ struct pl011_dmatx_data {
 struct uart_amba_port {
 	struct uart_port	port;
 	struct clk		*clk;
-	/* Two optional pin states - default & sleep */
-	struct pinctrl		*pinctrl;
-	struct pinctrl_state	*pins_default;
-	struct pinctrl_state	*pins_sleep;
 	const struct vendor_data *vendor;
 	unsigned int		dmacr;		/* dma control reg */
 	unsigned int		im;		/* interrupt mask */
@@ -1479,12 +1475,7 @@ static int pl011_hwinit(struct uart_port *port)
 	int retval;
 
 	/* Optionaly enable pins to be muxed in and configured */
-	if (!IS_ERR(uap->pins_default)) {
-		retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
-		if (retval)
-			dev_err(port->dev,
-				"could not set default pins\n");
-	}
+	pinctrl_pm_select_default_state(port->dev);
 
 	/*
 	 * Try to enable the clock producer.
@@ -1610,7 +1601,6 @@ static void pl011_shutdown(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int cr;
-	int retval;
 
 	/*
 	 * disable all interrupts
@@ -1653,13 +1643,7 @@ static void pl011_shutdown(struct uart_port *port)
 	 */
 	clk_disable_unprepare(uap->clk);
 	/* Optionally let pins go into sleep states */
-	if (!IS_ERR(uap->pins_sleep)) {
-		retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
-		if (retval)
-			dev_err(port->dev,
-				"could not set pins to sleep state\n");
-	}
-
+	pinctrl_pm_select_sleep_state(port->dev);
 
 	if (uap->port.dev->platform_data) {
 		struct amba_pl011_data *plat;
@@ -2012,12 +1996,7 @@ static int __init pl011_console_setup(struct console *co, char *options)
 		return -ENODEV;
 
 	/* Allow pins to be muxed in and configured */
-	if (!IS_ERR(uap->pins_default)) {
-		ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
-		if (ret)
-			dev_err(uap->port.dev,
-				"could not set default pins\n");
-	}
+	pinctrl_pm_select_default_state(uap->port.dev);
 
 	ret = clk_prepare(uap->clk);
 	if (ret)
@@ -2131,21 +2110,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 		goto out;
 	}
 
-	uap->pinctrl = devm_pinctrl_get(&dev->dev);
-	if (IS_ERR(uap->pinctrl)) {
-		ret = PTR_ERR(uap->pinctrl);
-		goto out;
-	}
-	uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
-						 PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(uap->pins_default))
-		dev_err(&dev->dev, "could not get default pinstate\n");
-
-	uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
-					       PINCTRL_STATE_SLEEP);
-	if (IS_ERR(uap->pins_sleep))
-		dev_dbg(&dev->dev, "could not get sleep pinstate\n");
-
 	uap->clk = devm_clk_get(&dev->dev, NULL);
 	if (IS_ERR(uap->clk)) {
 		ret = PTR_ERR(uap->clk);
diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h
new file mode 100644
index 00000000000..cd5788be82c
--- /dev/null
+++ b/include/dt-bindings/pinctrl/rockchip.h
@@ -0,0 +1,32 @@
+/*
+ * Header providing constants for Rockchip pinctrl bindings.
+ *
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_ROCKCHIP_PINCTRL_H__
+#define __DT_BINDINGS_ROCKCHIP_PINCTRL_H__
+
+#define RK_GPIO0	0
+#define RK_GPIO1	1
+#define RK_GPIO2	2
+#define RK_GPIO3	3
+#define RK_GPIO4	4
+#define RK_GPIO6	6
+
+#define RK_FUNC_GPIO	0
+#define RK_FUNC_1	1
+#define RK_FUNC_2	2
+
+#endif
diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
index 4aad3cea69a..18eccefea06 100644
--- a/include/linux/pinctrl/consumer.h
+++ b/include/linux/pinctrl/consumer.h
@@ -40,6 +40,25 @@ extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s);
 extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev);
 extern void devm_pinctrl_put(struct pinctrl *p);
 
+#ifdef CONFIG_PM
+extern int pinctrl_pm_select_default_state(struct device *dev);
+extern int pinctrl_pm_select_sleep_state(struct device *dev);
+extern int pinctrl_pm_select_idle_state(struct device *dev);
+#else
+static inline int pinctrl_pm_select_default_state(struct device *dev)
+{
+	return 0;
+}
+static inline int pinctrl_pm_select_sleep_state(struct device *dev)
+{
+	return 0;
+}
+static inline int pinctrl_pm_select_idle_state(struct device *dev)
+{
+	return 0;
+}
+#endif
+
 #else /* !CONFIG_PINCTRL */
 
 static inline int pinctrl_request_gpio(unsigned gpio)
@@ -92,6 +111,21 @@ static inline void devm_pinctrl_put(struct pinctrl *p)
 {
 }
 
+static inline int pinctrl_pm_select_default_state(struct device *dev)
+{
+	return 0;
+}
+
+static inline int pinctrl_pm_select_sleep_state(struct device *dev)
+{
+	return 0;
+}
+
+static inline int pinctrl_pm_select_idle_state(struct device *dev)
+{
+	return 0;
+}
+
 #endif /* CONFIG_PINCTRL */
 
 static inline struct pinctrl * __must_check pinctrl_get_select(
@@ -158,47 +192,4 @@ static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(
 	return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
 }
 
-#ifdef CONFIG_PINCONF
-
-extern int pin_config_get(const char *dev_name, const char *name,
-			  unsigned long *config);
-extern int pin_config_set(const char *dev_name, const char *name,
-			  unsigned long config);
-extern int pin_config_group_get(const char *dev_name,
-				const char *pin_group,
-				unsigned long *config);
-extern int pin_config_group_set(const char *dev_name,
-				const char *pin_group,
-				unsigned long config);
-
-#else
-
-static inline int pin_config_get(const char *dev_name, const char *name,
-				 unsigned long *config)
-{
-	return 0;
-}
-
-static inline int pin_config_set(const char *dev_name, const char *name,
-				 unsigned long config)
-{
-	return 0;
-}
-
-static inline int pin_config_group_get(const char *dev_name,
-				       const char *pin_group,
-				       unsigned long *config)
-{
-	return 0;
-}
-
-static inline int pin_config_group_set(const char *dev_name,
-				       const char *pin_group,
-				       unsigned long config)
-{
-	return 0;
-}
-
-#endif
-
 #endif /* __LINUX_PINCTRL_CONSUMER_H */
diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h
index 6e5f8a985ea..281cb91ddcf 100644
--- a/include/linux/pinctrl/devinfo.h
+++ b/include/linux/pinctrl/devinfo.h
@@ -28,6 +28,10 @@
 struct dev_pin_info {
 	struct pinctrl *p;
 	struct pinctrl_state *default_state;
+#ifdef CONFIG_PM
+	struct pinctrl_state *sleep_state;
+	struct pinctrl_state *idle_state;
+#endif
 };
 
 extern int pinctrl_bind_pins(struct device *dev);
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 6aa23809662..bf7e989abcb 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -29,12 +29,25 @@
  *	if for example some other pin is going to drive the signal connected
  *	to it for a while. Pins used for input are usually always high
  *	impedance.
+ * @PIN_CONFIG_BIAS_BUS_HOLD: the pin will be set to weakly latch so that it
+ *	weakly drives the last value on a tristate bus, also known as a "bus
+ *	holder", "bus keeper" or "repeater". This allows another device on the
+ *	bus to change the value by driving the bus high or low and switching to
+ *	tristate. The argument is ignored.
  * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high
  *	impedance to VDD). If the argument is != 0 pull-up is enabled,
- *	if it is 0, pull-up is disabled.
+ *	if it is 0, pull-up is total, i.e. the pin is connected to VDD.
  * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high
  *	impedance to GROUND). If the argument is != 0 pull-down is enabled,
- *	if it is 0, pull-down is disabled.
+ *	if it is 0, pull-down is total, i.e. the pin is connected to GROUND.
+ * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based
+ *	on embedded knowledge of the controller hardware, like current mux
+ *	function. The pull direction and possibly strength too will normally
+ *	be decided completely inside the hardware block and not be readable
+ *	from the kernel side.
+ *	If the argument is != 0 pull up/down is enabled, if it is 0, the
+ *	configuration is ignored. The proper way to disable it is to use
+ *	@PIN_CONFIG_BIAS_DISABLE.
  * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and
  *	low, this is the most typical case and is typically achieved with two
  *	active transistors on the output. Setting this config will enable
@@ -57,14 +70,14 @@
  *	setting pins to this mode.
  * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode,
  *	which means it will wait for signals to settle when reading inputs. The
- *	argument gives the debounce time on a custom format. Setting the
+ *	argument gives the debounce time in usecs. Setting the
  *	argument to zero turns debouncing off.
  * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
  *	supplies, the argument to this parameter (on a custom format) tells
  *	the driver which alternative power source to use.
  * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
- * 	this parameter (on a custom format) tells the driver which alternative
- * 	slew rate to use.
+ *	this parameter (on a custom format) tells the driver which alternative
+ *	slew rate to use.
  * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power
  *	operation, if several modes of operation are supported these can be
  *	passed in the argument on a custom form, else just use argument 1
@@ -78,8 +91,10 @@
 enum pin_config_param {
 	PIN_CONFIG_BIAS_DISABLE,
 	PIN_CONFIG_BIAS_HIGH_IMPEDANCE,
+	PIN_CONFIG_BIAS_BUS_HOLD,
 	PIN_CONFIG_BIAS_PULL_UP,
 	PIN_CONFIG_BIAS_PULL_DOWN,
+	PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
 	PIN_CONFIG_DRIVE_PUSH_PULL,
 	PIN_CONFIG_DRIVE_OPEN_DRAIN,
 	PIN_CONFIG_DRIVE_OPEN_SOURCE,
diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h
index 1ad4f31ef6b..f6998692bdc 100644
--- a/include/linux/pinctrl/pinconf.h
+++ b/include/linux/pinctrl/pinconf.h
@@ -30,7 +30,7 @@ struct seq_file;
  * @pin_config_set: configure an individual pin
  * @pin_config_group_get: get configurations for an entire pin group
  * @pin_config_group_set: configure all pins in a group
- * @pin_config_group_dbg_set: optional debugfs to modify a pin configuration
+ * @pin_config_dbg_parse_modify: optional debugfs to modify a pin configuration
  * @pin_config_dbg_show: optional debugfs display hook that will provide
  *	per-device info for a certain pin in debugfs
  * @pin_config_group_dbg_show: optional debugfs display hook that will provide
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 2c2a9e8d857..5979147d2bd 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -49,7 +49,8 @@ struct pinctrl_pin_desc {
  * @name: a name for the chip in this range
  * @id: an ID number for the chip in this range
  * @base: base offset of the GPIO range
- * @pin_base: base pin number of the GPIO range
+ * @pin_base: base pin number of the GPIO range if pins == NULL
+ * @pins: enumeration of pins in GPIO range or NULL
  * @npins: number of pins in the GPIO range, including the base number
  * @gc: an optional pointer to a gpio_chip
  */
@@ -59,6 +60,7 @@ struct pinctrl_gpio_range {
 	unsigned int id;
 	unsigned int base;
 	unsigned int pin_base;
+	unsigned const *pins;
 	unsigned int npins;
 	struct gpio_chip *gc;
 };
author	Linus Torvalds <torvalds@linux-foundation.org>	2013-07-03 11:48:03 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2013-07-03 11:48:03 -0700
commit	3dbde57ad941c55345fd7fac0ee3f70f204b02d8 (patch)
tree	237c6de64d05da3f61b9ac1724e37a5c1f014b71
parent	a6e6d863cf68bba886acfe47dbdc8f245cce588f (diff)
parent	2207a4e1ca6a1bb126360b6d0c236af6664532f2 (diff)