[ARM] 4933/1: AT91CAP9 UDPHS driver: generic AT91 parts.

This is patch 1 of 2 adding support for the USB High Speed Device Port
on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP
as the AVR32 and the AT91SAM9RL.

This patch makes the generic AT91 adaptations, mainly dealing with
the addition of the UDPHS UTMI clock.

Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 51 insertions, 2 deletions

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a33dfe45072..b87772cd3d3 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -112,12 +112,34 @@ static void pmc_sys_mode(struct clk *clk, int is_on)
 		at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
 }
 
+static void pmc_uckr_mode(struct clk *clk, int is_on)
+{
+	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+
+	if (is_on) {
+		is_on = AT91_PMC_LOCKU;
+		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
+	} else
+		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
+
+	do {
+		cpu_relax();
+	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
+}
+
 /* USB function clocks (PLLB must be 48 MHz) */
 static struct clk udpck = {
 	.name		= "udpck",
 	.parent		= &pllb,
 	.mode		= pmc_sys_mode,
 };
+static struct clk utmi_clk = {
+	.name		= "utmi_clk",
+	.parent		= &main_clk,
+	.pmc_mask	= AT91_PMC_UPLLEN,	/* in CKGR_UCKR */
+	.mode		= pmc_uckr_mode,
+	.type		= CLK_TYPE_PLL,
+};
 static struct clk uhpck = {
 	.name		= "uhpck",
 	.parent		= &pllb,
@@ -361,7 +383,7 @@ static void __init init_programmable_clock(struct clk *clk)
 
 static int at91_clk_show(struct seq_file *s, void *unused)
 {
-	u32		scsr, pcsr, sr;
+	u32		scsr, pcsr, uckr = 0, sr;
 	struct clk	*clk;
 
 	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
@@ -370,6 +392,8 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
 	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
 	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+	if (cpu_is_at91cap9())
+		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
 
@@ -382,6 +406,8 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 			state = (scsr & clk->pmc_mask) ? "on" : "off";
 		else if (clk->mode == pmc_periph_mode)
 			state = (pcsr & clk->pmc_mask) ? "on" : "off";
+		else if (clk->mode == pmc_uckr_mode)
+			state = (uckr & clk->pmc_mask) ? "on" : "off";
 		else if (clk->pmc_mask)
 			state = (sr & clk->pmc_mask) ? "on" : "off";
 		else if (clk == &clk32k || clk == &main_clk)
@@ -582,6 +608,17 @@ int __init at91_clock_init(unsigned long main_clock)
 	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 
 	/*
+	 * USB HS clock init
+	 */
+	if (cpu_is_at91cap9()) {
+		/*
+		 * multiplier is hard-wired to 40
+		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
+		 */
+		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+	}
+
+	/*
 	 * MCK and CPU derive from one of those primary clocks.
 	 * For now, assume this parentage won't change.
 	 */
@@ -598,6 +635,9 @@ int __init at91_clock_init(unsigned long main_clock)
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
 		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
 
+	if (cpu_is_at91cap9())
+		list_add_tail(&utmi_clk.node, &clocks);
+
 	/* MCK and CPU clock are "always on" */
 	clk_enable(&mck);
 
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index c2b13c28015..2001e81f226 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -39,10 +39,14 @@
 #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
 
 #define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
+#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
 
 #define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
 #define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
 
 #define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
@@ -97,6 +101,7 @@
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
 #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
 #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
 #define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index dc189f01c5b..1f247028686 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -36,6 +36,7 @@
 #include <linux/i2c.h>
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -45,6 +46,9 @@ struct at91_udc_data {
 };
 extern void __init at91_add_device_udc(struct at91_udc_data *data);
 
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
  /* Compact Flash */
 struct at91_cf_data {
 	u8	irq_pin;		/* I/O IRQ */